Telnet Class
Properties Methods Events Config Settings Errors
The Telnet Class is used to communicate with servers implementing the TELNET protocol.
Class Name
IPWorksSSL_Telnet
Procedural Interface
ipworksssl_telnet_open(); ipworksssl_telnet_close($res); ipworksssl_telnet_register_callback($res, $id, $function); ipworksssl_telnet_get_last_error($res); ipworksssl_telnet_get_last_error_code($res); ipworksssl_telnet_set($res, $id, $index, $value); ipworksssl_telnet_get($res, $id, $index); ipworksssl_telnet_do_config($res, $configurationstring); ipworksssl_telnet_do_connect($res); ipworksssl_telnet_do_connectto($res, $host); ipworksssl_telnet_do_disconnect($res); ipworksssl_telnet_do_doevents($res); ipworksssl_telnet_do_pausedata($res); ipworksssl_telnet_do_processdata($res); ipworksssl_telnet_do_reset($res); ipworksssl_telnet_do_send($res, $text); ipworksssl_telnet_do_sendbytes($res, $data); ipworksssl_telnet_do_sendcommand($res, $command); ipworksssl_telnet_do_senddontoption($res, $dontoption); ipworksssl_telnet_do_senddooption($res, $dooption); ipworksssl_telnet_do_senddosuboption($res, $dosuboption); ipworksssl_telnet_do_sendtext($res, $text); ipworksssl_telnet_do_sendurgentbytes($res, $urgentbytes); ipworksssl_telnet_do_sendurgenttext($res, $urgenttext); ipworksssl_telnet_do_sendwilloption($res, $willoption); ipworksssl_telnet_do_sendwontoption($res, $wontoption);
Remarks
The Telnet Class supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL-related settings are also supported through the Config method.
The Telnet Class provides a simple interface to Telnet communications as specified by RFC 854. It allows sending of Telnet command codes to remote Telnet servers, and it scans the input data for Telnet commands. Appropriate events are fired for received commands.
The connection interface is very similar to that of TCPClient. The same properties and events are used for sending and receiving normal data, and the same property set is used to set properties of the connection. The Telnet Class adds a number of methods like SendCommand, SendDoOption, and others that allow for sending of Telnet commands to the other end. The respective events (e.g., Command, Do) are fired when the corresponding Telnet commands are received.
Property List
The following is the full list of the properties of the class with short descriptions. Click on the links for further details.
AcceptData | This property indicates whether data reception is currently enabled. |
BytesSent | This property includes the number of bytes actually sent after a call to the SendBytes method. |
Connected | This property indicates whether the class is connected. |
FirewallAutoDetect | This property tells the class whether or not to automatically detect and use firewall system settings, if available. |
FirewallType | This property determines the type of firewall to connect through. |
FirewallHost | This property contains the name or IP address of the firewall (optional). |
FirewallPassword | This property contains a password if authentication is to be used when connecting through the firewall. |
FirewallPort | This property contains the Transmission Control Protocol (TCP) port for the firewall Host . |
FirewallUser | This property contains a username if authentication is to be used when connecting through a firewall. |
KeepAlive | When True, KEEPALIVE packets are enabled (for long connections). |
Linger | When set to True, this property ensures that connections are terminated gracefully. |
LocalHost | This property includes the name of the local host or user-assigned IP interface through which connections are initiated or accepted. |
LocalPort | This property includes the Transmission Control Protocol (TCP) port in the local host where the TCPClient binds. |
RemoteHost | This property includes the address of the remote host. Domain names are resolved to IP addresses. |
RemotePort | This property includes the secure Telnet port in the remote host (default is 23). |
SSLAcceptServerCertEffectiveDate | This is the date on which this certificate becomes valid. |
SSLAcceptServerCertExpirationDate | This is the date the certificate expires. |
SSLAcceptServerCertExtendedKeyUsage | This is a comma-delimited list of extended key usage identifiers. |
SSLAcceptServerCertFingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
SSLAcceptServerCertFingerprintSHA1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
SSLAcceptServerCertFingerprintSHA256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
SSLAcceptServerCertIssuer | This is the issuer of the certificate. |
SSLAcceptServerCertPrivateKey | This is the private key of the certificate (if available). |
SSLAcceptServerCertPrivateKeyAvailable | This property shows whether a PrivateKey is available for the selected certificate. |
SSLAcceptServerCertPrivateKeyContainer | This is the name of the PrivateKey container for the certificate (if available). |
SSLAcceptServerCertPublicKey | This is the public key of the certificate. |
SSLAcceptServerCertPublicKeyAlgorithm | This property contains the textual description of the certificate's public key algorithm. |
SSLAcceptServerCertPublicKeyLength | This is the length of the certificate's public key (in bits). |
SSLAcceptServerCertSerialNumber | This is the serial number of the certificate encoded as a string. |
SSLAcceptServerCertSignatureAlgorithm | The property contains the text description of the certificate's signature algorithm. |
SSLAcceptServerCertStore | This is the name of the certificate store for the client certificate. |
SSLAcceptServerCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SSLAcceptServerCertStoreType | This is the type of certificate store for this certificate. |
SSLAcceptServerCertSubjectAltNames | This property contains comma-separated lists of alternative subject names for the certificate. |
SSLAcceptServerCertThumbprintMD5 | This property contains the MD5 hash of the certificate. |
SSLAcceptServerCertThumbprintSHA1 | This property contains the SHA-1 hash of the certificate. |
SSLAcceptServerCertThumbprintSHA256 | This property contains the SHA-256 hash of the certificate. |
SSLAcceptServerCertUsage | This property contains the text description of UsageFlags . |
SSLAcceptServerCertUsageFlags | This property contains the flags that show intended use for the certificate. |
SSLAcceptServerCertVersion | This property contains the certificate's version number. |
SSLAcceptServerCertSubject | This is the subject of the certificate used for client authentication. |
SSLAcceptServerCertEncoded | This is the certificate (PEM/Base64 encoded). |
SSLCertEffectiveDate | This is the date on which this certificate becomes valid. |
SSLCertExpirationDate | This is the date the certificate expires. |
SSLCertExtendedKeyUsage | This is a comma-delimited list of extended key usage identifiers. |
SSLCertFingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
SSLCertFingerprintSHA1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
SSLCertFingerprintSHA256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
SSLCertIssuer | This is the issuer of the certificate. |
SSLCertPrivateKey | This is the private key of the certificate (if available). |
SSLCertPrivateKeyAvailable | This property shows whether a PrivateKey is available for the selected certificate. |
SSLCertPrivateKeyContainer | This is the name of the PrivateKey container for the certificate (if available). |
SSLCertPublicKey | This is the public key of the certificate. |
SSLCertPublicKeyAlgorithm | This property contains the textual description of the certificate's public key algorithm. |
SSLCertPublicKeyLength | This is the length of the certificate's public key (in bits). |
SSLCertSerialNumber | This is the serial number of the certificate encoded as a string. |
SSLCertSignatureAlgorithm | The property contains the text description of the certificate's signature algorithm. |
SSLCertStore | This is the name of the certificate store for the client certificate. |
SSLCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SSLCertStoreType | This is the type of certificate store for this certificate. |
SSLCertSubjectAltNames | This property contains comma-separated lists of alternative subject names for the certificate. |
SSLCertThumbprintMD5 | This property contains the MD5 hash of the certificate. |
SSLCertThumbprintSHA1 | This property contains the SHA-1 hash of the certificate. |
SSLCertThumbprintSHA256 | This property contains the SHA-256 hash of the certificate. |
SSLCertUsage | This property contains the text description of UsageFlags . |
SSLCertUsageFlags | This property contains the flags that show intended use for the certificate. |
SSLCertVersion | This property contains the certificate's version number. |
SSLCertSubject | This is the subject of the certificate used for client authentication. |
SSLCertEncoded | This is the certificate (PEM/Base64 encoded). |
SSLProvider | This property specifies the Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use. |
SSLServerCertEffectiveDate | This is the date on which this certificate becomes valid. |
SSLServerCertExpirationDate | This is the date the certificate expires. |
SSLServerCertExtendedKeyUsage | This is a comma-delimited list of extended key usage identifiers. |
SSLServerCertFingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
SSLServerCertFingerprintSHA1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
SSLServerCertFingerprintSHA256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
SSLServerCertIssuer | This is the issuer of the certificate. |
SSLServerCertPrivateKey | This is the private key of the certificate (if available). |
SSLServerCertPrivateKeyAvailable | This property shows whether a PrivateKey is available for the selected certificate. |
SSLServerCertPrivateKeyContainer | This is the name of the PrivateKey container for the certificate (if available). |
SSLServerCertPublicKey | This is the public key of the certificate. |
SSLServerCertPublicKeyAlgorithm | This property contains the textual description of the certificate's public key algorithm. |
SSLServerCertPublicKeyLength | This is the length of the certificate's public key (in bits). |
SSLServerCertSerialNumber | This is the serial number of the certificate encoded as a string. |
SSLServerCertSignatureAlgorithm | The property contains the text description of the certificate's signature algorithm. |
SSLServerCertStore | This is the name of the certificate store for the client certificate. |
SSLServerCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SSLServerCertStoreType | This is the type of certificate store for this certificate. |
SSLServerCertSubjectAltNames | This property contains comma-separated lists of alternative subject names for the certificate. |
SSLServerCertThumbprintMD5 | This property contains the MD5 hash of the certificate. |
SSLServerCertThumbprintSHA1 | This property contains the SHA-1 hash of the certificate. |
SSLServerCertThumbprintSHA256 | This property contains the SHA-256 hash of the certificate. |
SSLServerCertUsage | This property contains the text description of UsageFlags . |
SSLServerCertUsageFlags | This property contains the flags that show intended use for the certificate. |
SSLServerCertVersion | This property contains the certificate's version number. |
SSLServerCertSubject | This is the subject of the certificate used for client authentication. |
SSLServerCertEncoded | This is the certificate (PEM/Base64 encoded). |
SSLStartMode | This property determines how the class starts the Secure Sockets Layer (SSL) negotiation. |
Timeout | This property specifies the timeout for the class. |
Transparent | When this property is True, Telnet command processing is disabled. |
Method List
The following is the full list of the methods of the class with short descriptions. Click on the links for further details.
Config | Sets or retrieves a configuration setting. |
Connect | This method connects to a remote host. |
ConnectTo | This method connects to a remote host. |
Disconnect | This method disconnects from the remote host. |
DoEvents | This method processes events from the internal message queue. |
PauseData | This method pauses data reception. |
ProcessData | This method reenables data reception after a call to PauseData . |
Reset | This method will reset the class. |
Send | This method sends binary data to the remote host. |
SendBytes | This method sends binary data to the remote host. |
SendCommand | This method sends a single-character Telnet command code to the server. |
SendDontOption | This method sends a single-character Telnet option code to the server with the Telnet DONT command. |
SendDoOption | This method sends a single-character Telnet option code to the server with the Telnet DO command. |
SendDoSubOption | This methods sends a Telnet SubOption to send to the server with the SubOption command. |
SendText | This method sends text to the remote host. |
SendUrgentBytes | This method urgently sends binary data to the remote host. |
SendUrgentText | This method urgently sends text to the remote host. |
SendWillOption | This method sends a single-character Telnet option code the server with the Telnet WILL command. |
SendWontOption | This method sends a single-character Telnet option code to the server with the Telnet WONT command. |
Event List
The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.
Command | This event is fired when a Telnet command comes from the Telnet server. |
Connected | This event is fired immediately after a connection completes (or fails). |
ConnectionStatus | This event is fired to indicate changes in the connection state. |
DataIn | This event is fired when data are received from the remote host. |
Disconnected | This event is fired when a connection is closed. |
Do | This event is fired when a Telnet DO OPTION command comes from the Telnet server. |
Dont | This event is fired when a Telnet DONT OPTION command comes from the Telnet server. |
Error | Fired when information is available about errors during data delivery. |
ReadyToSend | This event is fired when the class is ready to send data. |
SSLServerAuthentication | Fired after the server presents its certificate to the client. |
SSLStatus | Fired when secure connection progress messages are available. |
SubOption | This event is fired when a Telnet SubOption command comes from the Telnet server. |
Will | This event is fired when a Telnet WILL OPTION command comes from the Telnet server. |
Wont | This event is fired when a Telnet WONT OPTION command comes from the Telnet server. |
Config Settings
The following is a list of config settings for the class with short descriptions. Click on the links for further details.
ConnectionTimeout | Sets a separate timeout value for establishing a connection. |
FirewallAutoDetect | Tells the class whether or not to automatically detect and use firewall system settings, if available. |
FirewallHost | Name or IP address of firewall (optional). |
FirewallPassword | Password to be used if authentication is to be used when connecting through the firewall. |
FirewallPort | The TCP port for the FirewallHost;. |
FirewallType | Determines the type of firewall to connect through. |
FirewallUser | A user name if authentication is to be used connecting through a firewall. |
KeepAliveInterval | The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received. |
KeepAliveTime | The inactivity time in milliseconds before a TCP keep-alive packet is sent. |
Linger | When set to True, connections are terminated gracefully. |
LingerTime | Time in seconds to have the connection linger. |
LocalHost | The name of the local host through which connections are initiated or accepted. |
LocalPort | The port in the local host where the class binds. |
MaxLineLength | The maximum amount of data to accumulate when no EOL is found. |
MaxTransferRate | The transfer rate limit in bytes per second. |
ProxyExceptionsList | A semicolon separated list of hosts and IPs to bypass when using a proxy. |
TCPKeepAlive | Determines whether or not the keep alive socket option is enabled. |
TcpNoDelay | Whether or not to delay when sending packets. |
UseIPv6 | Whether to use IPv6. |
LogSSLPackets | Controls whether SSL packets are logged when using the internal security API. |
OpenSSLCADir | The path to a directory containing CA certificates. |
OpenSSLCAFile | Name of the file containing the list of CA's trusted by your application. |
OpenSSLCipherList | A string that controls the ciphers to be used by SSL. |
OpenSSLPrngSeedData | The data to seed the pseudo random number generator (PRNG). |
ReuseSSLSession | Determines if the SSL session is reused. |
SSLCACertFilePaths | The paths to CA certificate files on Unix/Linux. |
SSLCACerts | A newline separated list of CA certificate to be included when performing an SSL handshake. |
SSLCheckCRL | Whether to check the Certificate Revocation List for the server certificate. |
SSLCheckOCSP | Whether to use OCSP to check the status of the server certificate. |
SSLCipherStrength | The minimum cipher strength used for bulk encryption. |
SSLClientCACerts | A newline separated list of CA certificates to use during SSL client certificate validation. |
SSLEnabledCipherSuites | The cipher suite to be used in an SSL negotiation. |
SSLEnabledProtocols | Used to enable/disable the supported security protocols. |
SSLEnableRenegotiation | Whether the renegotiation_info SSL extension is supported. |
SSLIncludeCertChain | Whether the entire certificate chain is included in the SSLServerAuthentication event. |
SSLKeyLogFile | The location of a file where per-session secrets are written for debugging purposes. |
SSLNegotiatedCipher | Returns the negotiated cipher suite. |
SSLNegotiatedCipherStrength | Returns the negotiated cipher suite strength. |
SSLNegotiatedCipherSuite | Returns the negotiated cipher suite. |
SSLNegotiatedKeyExchange | Returns the negotiated key exchange algorithm. |
SSLNegotiatedKeyExchangeStrength | Returns the negotiated key exchange algorithm strength. |
SSLNegotiatedVersion | Returns the negotiated protocol version. |
SSLSecurityFlags | Flags that control certificate verification. |
SSLServerCACerts | A newline separated list of CA certificates to use during SSL server certificate validation. |
TLS12SignatureAlgorithms | Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal. |
TLS12SupportedGroups | The supported groups for ECC. |
TLS13KeyShareGroups | The groups for which to pregenerate key shares. |
TLS13SignatureAlgorithms | The allowed certificate signature algorithms. |
TLS13SupportedGroups | The supported groups for (EC)DHE key exchange. |
AbsoluteTimeout | Determines whether timeouts are inactivity timeouts or absolute timeouts. |
FirewallData | Used to send extra data to the firewall. |
InBufferSize | The size in bytes of the incoming queue of the socket. |
OutBufferSize | The size in bytes of the outgoing queue of the socket. |
BuildInfo | Information about the product's build. |
CodePage | The system code page used for Unicode to Multibyte translations. |
LicenseInfo | Information about the current license. |
MaskSensitiveData | Whether sensitive data is masked in log messages. |
ProcessIdleEvents | Whether the class uses its internal event loop to process events when the main thread is idle. |
SelectWaitMillis | The length of time in milliseconds the class will wait when DoEvents is called if there are no events to process. |
UseFIPSCompliantAPI | Tells the class whether or not to use FIPS certified APIs. |
UseInternalSecurityAPI | Whether or not to use the system security libraries or an internal implementation. |
AcceptData Property (IPWorksSSL_Telnet Class)
This property indicates whether data reception is currently enabled.
Object Oriented Interface
public function getAcceptData();
Procedural Interface
ipworksssl_telnet_get($res, 1 );
Default Value
true
Remarks
This property indicates whether data reception is currently enabled. When false, data reception is disabled and the DataIn event will not fire. Use the PauseData and ProcessData methods to pause and resume data reception.
This property is read-only and not available at design time.
Data Type
Boolean
BytesSent Property (IPWorksSSL_Telnet Class)
This property includes the number of bytes actually sent after a call to the SendBytes method.
Object Oriented Interface
public function getBytesSent();
Procedural Interface
ipworksssl_telnet_get($res, 2 );
Default Value
0
Remarks
The BytesSent property shows how many bytes were sent after the last call to SendBytes or SendUrgentBytes. Please check the SendBytes method for more information.
This property is read-only and not available at design time.
Data Type
Integer
Connected Property (IPWorksSSL_Telnet Class)
This property indicates whether the class is connected.
Object Oriented Interface
public function getConnected();
Procedural Interface
ipworksssl_telnet_get($res, 3 );
Default Value
false
Remarks
This property indicates whether the class is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.
This property is read-only and not available at design time.
Data Type
Boolean
FirewallAutoDetect Property (IPWorksSSL_Telnet Class)
This property tells the class whether or not to automatically detect and use firewall system settings, if available.
Object Oriented Interface
public function getFirewallAutoDetect(); public function setFirewallAutoDetect($value);
Procedural Interface
ipworksssl_telnet_get($res, 4 ); ipworksssl_telnet_set($res, 4, $value );
Default Value
false
Remarks
This property tells the class whether or not to automatically detect and use firewall system settings, if available.
Data Type
Boolean
FirewallType Property (IPWorksSSL_Telnet Class)
This property determines the type of firewall to connect through.
Object Oriented Interface
public function getFirewallType(); public function setFirewallType($value);
Procedural Interface
ipworksssl_telnet_get($res, 5 ); ipworksssl_telnet_set($res, 5, $value );
Default Value
0
Remarks
This property determines the type of firewall to connect through. The applicable values are as follows:
fwNone (0) | No firewall (default setting). |
fwTunnel (1) | Connect through a tunneling proxy. FirewallPort is set to 80. |
fwSOCKS4 (2) | Connect through a SOCKS4 Proxy. FirewallPort is set to 1080. |
fwSOCKS5 (3) | Connect through a SOCKS5 Proxy. FirewallPort is set to 1080. |
fwSOCKS4A (10) | Connect through a SOCKS4A Proxy. FirewallPort is set to 1080. |
Data Type
Integer
FirewallHost Property (IPWorksSSL_Telnet Class)
This property contains the name or IP address of the firewall (optional).
Object Oriented Interface
public function getFirewallHost(); public function setFirewallHost($value);
Procedural Interface
ipworksssl_telnet_get($res, 6 ); ipworksssl_telnet_set($res, 6, $value );
Default Value
''
Remarks
This property contains the name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.
If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class fails with an error.
Data Type
String
FirewallPassword Property (IPWorksSSL_Telnet Class)
This property contains a password if authentication is to be used when connecting through the firewall.
Object Oriented Interface
public function getFirewallPassword(); public function setFirewallPassword($value);
Procedural Interface
ipworksssl_telnet_get($res, 7 ); ipworksssl_telnet_set($res, 7, $value );
Default Value
''
Remarks
This property contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.
Data Type
String
FirewallPort Property (IPWorksSSL_Telnet Class)
This property contains the Transmission Control Protocol (TCP) port for the firewall Host .
Object Oriented Interface
public function getFirewallPort(); public function setFirewallPort($value);
Procedural Interface
ipworksssl_telnet_get($res, 8 ); ipworksssl_telnet_set($res, 8, $value );
Default Value
0
Remarks
This property contains the Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.
Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.
Data Type
Integer
FirewallUser Property (IPWorksSSL_Telnet Class)
This property contains a username if authentication is to be used when connecting through a firewall.
Object Oriented Interface
public function getFirewallUser(); public function setFirewallUser($value);
Procedural Interface
ipworksssl_telnet_get($res, 9 ); ipworksssl_telnet_set($res, 9, $value );
Default Value
''
Remarks
This property contains a username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the class fails with an error.
Data Type
String
KeepAlive Property (IPWorksSSL_Telnet Class)
When True, KEEPALIVE packets are enabled (for long connections).
Object Oriented Interface
public function getKeepAlive(); public function setKeepAlive($value);
Procedural Interface
ipworksssl_telnet_get($res, 10 ); ipworksssl_telnet_set($res, 10, $value );
Default Value
false
Remarks
The KeepAlive enables the SO_KEEPALIVE option on the socket. This option prevents long connections from timing out in case of inactivity.
Note: System Transmission Control Protocol (TCP)/IP stack implementations are not required to support SO_KEEPALIVE.
Data Type
Boolean
Linger Property (IPWorksSSL_Telnet Class)
When set to True, this property ensures that connections are terminated gracefully.
Object Oriented Interface
public function getLinger(); public function setLinger($value);
Procedural Interface
ipworksssl_telnet_get($res, 11 ); ipworksssl_telnet_set($res, 11, $value );
Default Value
true
Remarks
This property controls how a connection is closed. The default is True.
In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.
In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.
The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).
Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.
Data Type
Boolean
LocalHost Property (IPWorksSSL_Telnet Class)
This property includes the name of the local host or user-assigned IP interface through which connections are initiated or accepted.
Object Oriented Interface
public function getLocalHost(); public function setLocalHost($value);
Procedural Interface
ipworksssl_telnet_get($res, 12 ); ipworksssl_telnet_set($res, 12, $value );
Default Value
''
Remarks
The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.
In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.
If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).
Note: LocalHost is not persistent. You must always set it in code, and never in the property window.
Data Type
String
LocalPort Property (IPWorksSSL_Telnet Class)
This property includes the Transmission Control Protocol (TCP) port in the local host where the TCPClient binds.
Object Oriented Interface
public function getLocalPort(); public function setLocalPort($value);
Procedural Interface
ipworksssl_telnet_get($res, 13 ); ipworksssl_telnet_set($res, 13, $value );
Default Value
0
Remarks
The LocalPort property must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.
Setting it to 0 (default) enables the TCP/IP stack to choose a port at random. The chosen port will be shown by the LocalPort property after the connection is established.
LocalPort cannot be changed once a connection is made. Any attempt to set the LocalPort property when a connection is active will generate an error.
The LocalPort property is useful when trying to connect to services that require a trusted port in the client side.
Data Type
Integer
RemoteHost Property (IPWorksSSL_Telnet Class)
This property includes the address of the remote host. Domain names are resolved to IP addresses.
Object Oriented Interface
public function getRemoteHost(); public function setRemoteHost($value);
Procedural Interface
ipworksssl_telnet_get($res, 14 ); ipworksssl_telnet_set($res, 14, $value );
Default Value
''
Remarks
This property specifies the IP address (IP number in dotted internet format) or the domain name of the remote host. It is set before a connection is attempted and cannot be changed once a connection is established.
If this property is set to a domain name, a DNS request is initiated, and upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, an error is returned.
If the class is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.
Example. Connecting:
TCPClientControl.RemoteHost = "MyHostNameOrIP"
TCPClientControl.RemotePort = 777
TCPClientControl.Connected = true
Data Type
String
RemotePort Property (IPWorksSSL_Telnet Class)
This property includes the secure Telnet port in the remote host (default is 23).
Object Oriented Interface
public function getRemotePort(); public function setRemotePort($value);
Procedural Interface
ipworksssl_telnet_get($res, 15 ); ipworksssl_telnet_set($res, 15, $value );
Default Value
23
Remarks
For the implicit Secure Sockets Layer (SSL), use port 992 (for more information, please refer to the SSLStartMode property).
A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.
This property is not available at design time.
Data Type
Integer
SSLAcceptServerCertEffectiveDate Property (IPWorksSSL_Telnet Class)
This is the date on which this certificate becomes valid.
Object Oriented Interface
public function getSSLAcceptServerCertEffectiveDate();
Procedural Interface
ipworksssl_telnet_get($res, 16 );
Default Value
''
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
Data Type
String
SSLAcceptServerCertExpirationDate Property (IPWorksSSL_Telnet Class)
This is the date the certificate expires.
Object Oriented Interface
public function getSSLAcceptServerCertExpirationDate();
Procedural Interface
ipworksssl_telnet_get($res, 17 );
Default Value
''
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
Data Type
String
SSLAcceptServerCertExtendedKeyUsage Property (IPWorksSSL_Telnet Class)
This is a comma-delimited list of extended key usage identifiers.
Object Oriented Interface
public function getSSLAcceptServerCertExtendedKeyUsage();
Procedural Interface
ipworksssl_telnet_get($res, 18 );
Default Value
''
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
Data Type
String
SSLAcceptServerCertFingerprint Property (IPWorksSSL_Telnet Class)
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertFingerprint();
Procedural Interface
ipworksssl_telnet_get($res, 19 );
Default Value
''
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
Data Type
String
SSLAcceptServerCertFingerprintSHA1 Property (IPWorksSSL_Telnet Class)
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertFingerprintSHA1();
Procedural Interface
ipworksssl_telnet_get($res, 20 );
Default Value
''
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
Data Type
String
SSLAcceptServerCertFingerprintSHA256 Property (IPWorksSSL_Telnet Class)
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertFingerprintSHA256();
Procedural Interface
ipworksssl_telnet_get($res, 21 );
Default Value
''
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
Data Type
String
SSLAcceptServerCertIssuer Property (IPWorksSSL_Telnet Class)
This is the issuer of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertIssuer();
Procedural Interface
ipworksssl_telnet_get($res, 22 );
Default Value
''
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
Data Type
String
SSLAcceptServerCertPrivateKey Property (IPWorksSSL_Telnet Class)
This is the private key of the certificate (if available).
Object Oriented Interface
public function getSSLAcceptServerCertPrivateKey();
Procedural Interface
ipworksssl_telnet_get($res, 23 );
Default Value
''
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.
This property is read-only.
Data Type
String
SSLAcceptServerCertPrivateKeyAvailable Property (IPWorksSSL_Telnet Class)
This property shows whether a PrivateKey is available for the selected certificate.
Object Oriented Interface
public function getSSLAcceptServerCertPrivateKeyAvailable();
Procedural Interface
ipworksssl_telnet_get($res, 24 );
Default Value
false
Remarks
This property shows whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
Data Type
Boolean
SSLAcceptServerCertPrivateKeyContainer Property (IPWorksSSL_Telnet Class)
This is the name of the PrivateKey container for the certificate (if available).
Object Oriented Interface
public function getSSLAcceptServerCertPrivateKeyContainer();
Procedural Interface
ipworksssl_telnet_get($res, 25 );
Default Value
''
Remarks
This is the name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
Data Type
String
SSLAcceptServerCertPublicKey Property (IPWorksSSL_Telnet Class)
This is the public key of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertPublicKey();
Procedural Interface
ipworksssl_telnet_get($res, 26 );
Default Value
''
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
Data Type
String
SSLAcceptServerCertPublicKeyAlgorithm Property (IPWorksSSL_Telnet Class)
This property contains the textual description of the certificate's public key algorithm.
Object Oriented Interface
public function getSSLAcceptServerCertPublicKeyAlgorithm();
Procedural Interface
ipworksssl_telnet_get($res, 27 );
Default Value
''
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLAcceptServerCertPublicKeyLength Property (IPWorksSSL_Telnet Class)
This is the length of the certificate's public key (in bits).
Object Oriented Interface
public function getSSLAcceptServerCertPublicKeyLength();
Procedural Interface
ipworksssl_telnet_get($res, 28 );
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
Data Type
Integer
SSLAcceptServerCertSerialNumber Property (IPWorksSSL_Telnet Class)
This is the serial number of the certificate encoded as a string.
Object Oriented Interface
public function getSSLAcceptServerCertSerialNumber();
Procedural Interface
ipworksssl_telnet_get($res, 29 );
Default Value
''
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
Data Type
String
SSLAcceptServerCertSignatureAlgorithm Property (IPWorksSSL_Telnet Class)
The property contains the text description of the certificate's signature algorithm.
Object Oriented Interface
public function getSSLAcceptServerCertSignatureAlgorithm();
Procedural Interface
ipworksssl_telnet_get($res, 30 );
Default Value
''
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLAcceptServerCertStore Property (IPWorksSSL_Telnet Class)
This is the name of the certificate store for the client certificate.
Object Oriented Interface
public function getSSLAcceptServerCertStore(); public function setSSLAcceptServerCertStore($value);
Procedural Interface
ipworksssl_telnet_get($res, 31 ); ipworksssl_telnet_set($res, 31, $value );
Default Value
'MY'
Remarks
This is the name of the certificate store for the client certificate.
The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password protected, specify the password in SSLAcceptServerCertStorePassword.
SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
Data Type
Binary String
SSLAcceptServerCertStorePassword Property (IPWorksSSL_Telnet Class)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Object Oriented Interface
public function getSSLAcceptServerCertStorePassword(); public function setSSLAcceptServerCertStorePassword($value);
Procedural Interface
ipworksssl_telnet_get($res, 32 ); ipworksssl_telnet_set($res, 32, $value );
Default Value
''
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Data Type
String
SSLAcceptServerCertStoreType Property (IPWorksSSL_Telnet Class)
This is the type of certificate store for this certificate.
Object Oriented Interface
public function getSSLAcceptServerCertStoreType(); public function setSSLAcceptServerCertStoreType($value);
Procedural Interface
ipworksssl_telnet_get($res, 33 ); ipworksssl_telnet_set($res, 33, $value );
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLAcceptServerCertStore and set SSLAcceptServerCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
Data Type
Integer
SSLAcceptServerCertSubjectAltNames Property (IPWorksSSL_Telnet Class)
This property contains comma-separated lists of alternative subject names for the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertSubjectAltNames();
Procedural Interface
ipworksssl_telnet_get($res, 34 );
Default Value
''
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
Data Type
String
SSLAcceptServerCertThumbprintMD5 Property (IPWorksSSL_Telnet Class)
This property contains the MD5 hash of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertThumbprintMD5();
Procedural Interface
ipworksssl_telnet_get($res, 35 );
Default Value
''
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLAcceptServerCertThumbprintSHA1 Property (IPWorksSSL_Telnet Class)
This property contains the SHA-1 hash of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertThumbprintSHA1();
Procedural Interface
ipworksssl_telnet_get($res, 36 );
Default Value
''
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLAcceptServerCertThumbprintSHA256 Property (IPWorksSSL_Telnet Class)
This property contains the SHA-256 hash of the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertThumbprintSHA256();
Procedural Interface
ipworksssl_telnet_get($res, 37 );
Default Value
''
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLAcceptServerCertUsage Property (IPWorksSSL_Telnet Class)
This property contains the text description of UsageFlags .
Object Oriented Interface
public function getSSLAcceptServerCertUsage();
Procedural Interface
ipworksssl_telnet_get($res, 38 );
Default Value
''
Remarks
This property contains the text description of SSLAcceptServerCertUsageFlags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
Data Type
String
SSLAcceptServerCertUsageFlags Property (IPWorksSSL_Telnet Class)
This property contains the flags that show intended use for the certificate.
Object Oriented Interface
public function getSSLAcceptServerCertUsageFlags();
Procedural Interface
ipworksssl_telnet_get($res, 39 );
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
Data Type
Integer
SSLAcceptServerCertVersion Property (IPWorksSSL_Telnet Class)
This property contains the certificate's version number.
Object Oriented Interface
public function getSSLAcceptServerCertVersion();
Procedural Interface
ipworksssl_telnet_get($res, 40 );
Default Value
''
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
Data Type
String
SSLAcceptServerCertSubject Property (IPWorksSSL_Telnet Class)
This is the subject of the certificate used for client authentication.
Object Oriented Interface
public function getSSLAcceptServerCertSubject(); public function setSSLAcceptServerCertSubject($value);
Procedural Interface
ipworksssl_telnet_get($res, 41 ); ipworksssl_telnet_set($res, 41, $value );
Default Value
''
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
Data Type
String
SSLAcceptServerCertEncoded Property (IPWorksSSL_Telnet Class)
This is the certificate (PEM/Base64 encoded).
Object Oriented Interface
public function getSSLAcceptServerCertEncoded(); public function setSSLAcceptServerCertEncoded($value);
Procedural Interface
ipworksssl_telnet_get($res, 42 ); ipworksssl_telnet_set($res, 42, $value );
Default Value
''
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.
When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.
This property is not available at design time.
Data Type
Binary String
SSLCertEffectiveDate Property (IPWorksSSL_Telnet Class)
This is the date on which this certificate becomes valid.
Object Oriented Interface
public function getSSLCertEffectiveDate();
Procedural Interface
ipworksssl_telnet_get($res, 43 );
Default Value
''
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
Data Type
String
SSLCertExpirationDate Property (IPWorksSSL_Telnet Class)
This is the date the certificate expires.
Object Oriented Interface
public function getSSLCertExpirationDate();
Procedural Interface
ipworksssl_telnet_get($res, 44 );
Default Value
''
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
Data Type
String
SSLCertExtendedKeyUsage Property (IPWorksSSL_Telnet Class)
This is a comma-delimited list of extended key usage identifiers.
Object Oriented Interface
public function getSSLCertExtendedKeyUsage();
Procedural Interface
ipworksssl_telnet_get($res, 45 );
Default Value
''
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
Data Type
String
SSLCertFingerprint Property (IPWorksSSL_Telnet Class)
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Object Oriented Interface
public function getSSLCertFingerprint();
Procedural Interface
ipworksssl_telnet_get($res, 46 );
Default Value
''
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
Data Type
String
SSLCertFingerprintSHA1 Property (IPWorksSSL_Telnet Class)
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Object Oriented Interface
public function getSSLCertFingerprintSHA1();
Procedural Interface
ipworksssl_telnet_get($res, 47 );
Default Value
''
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
Data Type
String
SSLCertFingerprintSHA256 Property (IPWorksSSL_Telnet Class)
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Object Oriented Interface
public function getSSLCertFingerprintSHA256();
Procedural Interface
ipworksssl_telnet_get($res, 48 );
Default Value
''
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
Data Type
String
SSLCertIssuer Property (IPWorksSSL_Telnet Class)
This is the issuer of the certificate.
Object Oriented Interface
public function getSSLCertIssuer();
Procedural Interface
ipworksssl_telnet_get($res, 49 );
Default Value
''
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
Data Type
String
SSLCertPrivateKey Property (IPWorksSSL_Telnet Class)
This is the private key of the certificate (if available).
Object Oriented Interface
public function getSSLCertPrivateKey();
Procedural Interface
ipworksssl_telnet_get($res, 50 );
Default Value
''
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.
This property is read-only.
Data Type
String
SSLCertPrivateKeyAvailable Property (IPWorksSSL_Telnet Class)
This property shows whether a PrivateKey is available for the selected certificate.
Object Oriented Interface
public function getSSLCertPrivateKeyAvailable();
Procedural Interface
ipworksssl_telnet_get($res, 51 );
Default Value
false
Remarks
This property shows whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
Data Type
Boolean
SSLCertPrivateKeyContainer Property (IPWorksSSL_Telnet Class)
This is the name of the PrivateKey container for the certificate (if available).
Object Oriented Interface
public function getSSLCertPrivateKeyContainer();
Procedural Interface
ipworksssl_telnet_get($res, 52 );
Default Value
''
Remarks
This is the name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
Data Type
String
SSLCertPublicKey Property (IPWorksSSL_Telnet Class)
This is the public key of the certificate.
Object Oriented Interface
public function getSSLCertPublicKey();
Procedural Interface
ipworksssl_telnet_get($res, 53 );
Default Value
''
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
Data Type
String
SSLCertPublicKeyAlgorithm Property (IPWorksSSL_Telnet Class)
This property contains the textual description of the certificate's public key algorithm.
Object Oriented Interface
public function getSSLCertPublicKeyAlgorithm();
Procedural Interface
ipworksssl_telnet_get($res, 54 );
Default Value
''
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLCertPublicKeyLength Property (IPWorksSSL_Telnet Class)
This is the length of the certificate's public key (in bits).
Object Oriented Interface
public function getSSLCertPublicKeyLength();
Procedural Interface
ipworksssl_telnet_get($res, 55 );
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
Data Type
Integer
SSLCertSerialNumber Property (IPWorksSSL_Telnet Class)
This is the serial number of the certificate encoded as a string.
Object Oriented Interface
public function getSSLCertSerialNumber();
Procedural Interface
ipworksssl_telnet_get($res, 56 );
Default Value
''
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
Data Type
String
SSLCertSignatureAlgorithm Property (IPWorksSSL_Telnet Class)
The property contains the text description of the certificate's signature algorithm.
Object Oriented Interface
public function getSSLCertSignatureAlgorithm();
Procedural Interface
ipworksssl_telnet_get($res, 57 );
Default Value
''
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLCertStore Property (IPWorksSSL_Telnet Class)
This is the name of the certificate store for the client certificate.
Object Oriented Interface
public function getSSLCertStore(); public function setSSLCertStore($value);
Procedural Interface
ipworksssl_telnet_get($res, 58 ); ipworksssl_telnet_set($res, 58, $value );
Default Value
'MY'
Remarks
This is the name of the certificate store for the client certificate.
The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.
SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
Data Type
Binary String
SSLCertStorePassword Property (IPWorksSSL_Telnet Class)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Object Oriented Interface
public function getSSLCertStorePassword(); public function setSSLCertStorePassword($value);
Procedural Interface
ipworksssl_telnet_get($res, 59 ); ipworksssl_telnet_set($res, 59, $value );
Default Value
''
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Data Type
String
SSLCertStoreType Property (IPWorksSSL_Telnet Class)
This is the type of certificate store for this certificate.
Object Oriented Interface
public function getSSLCertStoreType(); public function setSSLCertStoreType($value);
Procedural Interface
ipworksssl_telnet_get($res, 60 ); ipworksssl_telnet_set($res, 60, $value );
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLCertStore and set SSLCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
Data Type
Integer
SSLCertSubjectAltNames Property (IPWorksSSL_Telnet Class)
This property contains comma-separated lists of alternative subject names for the certificate.
Object Oriented Interface
public function getSSLCertSubjectAltNames();
Procedural Interface
ipworksssl_telnet_get($res, 61 );
Default Value
''
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
Data Type
String
SSLCertThumbprintMD5 Property (IPWorksSSL_Telnet Class)
This property contains the MD5 hash of the certificate.
Object Oriented Interface
public function getSSLCertThumbprintMD5();
Procedural Interface
ipworksssl_telnet_get($res, 62 );
Default Value
''
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLCertThumbprintSHA1 Property (IPWorksSSL_Telnet Class)
This property contains the SHA-1 hash of the certificate.
Object Oriented Interface
public function getSSLCertThumbprintSHA1();
Procedural Interface
ipworksssl_telnet_get($res, 63 );
Default Value
''
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLCertThumbprintSHA256 Property (IPWorksSSL_Telnet Class)
This property contains the SHA-256 hash of the certificate.
Object Oriented Interface
public function getSSLCertThumbprintSHA256();
Procedural Interface
ipworksssl_telnet_get($res, 64 );
Default Value
''
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLCertUsage Property (IPWorksSSL_Telnet Class)
This property contains the text description of UsageFlags .
Object Oriented Interface
public function getSSLCertUsage();
Procedural Interface
ipworksssl_telnet_get($res, 65 );
Default Value
''
Remarks
This property contains the text description of SSLCertUsageFlags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
Data Type
String
SSLCertUsageFlags Property (IPWorksSSL_Telnet Class)
This property contains the flags that show intended use for the certificate.
Object Oriented Interface
public function getSSLCertUsageFlags();
Procedural Interface
ipworksssl_telnet_get($res, 66 );
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
Data Type
Integer
SSLCertVersion Property (IPWorksSSL_Telnet Class)
This property contains the certificate's version number.
Object Oriented Interface
public function getSSLCertVersion();
Procedural Interface
ipworksssl_telnet_get($res, 67 );
Default Value
''
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
Data Type
String
SSLCertSubject Property (IPWorksSSL_Telnet Class)
This is the subject of the certificate used for client authentication.
Object Oriented Interface
public function getSSLCertSubject(); public function setSSLCertSubject($value);
Procedural Interface
ipworksssl_telnet_get($res, 68 ); ipworksssl_telnet_set($res, 68, $value );
Default Value
''
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
Data Type
String
SSLCertEncoded Property (IPWorksSSL_Telnet Class)
This is the certificate (PEM/Base64 encoded).
Object Oriented Interface
public function getSSLCertEncoded(); public function setSSLCertEncoded($value);
Procedural Interface
ipworksssl_telnet_get($res, 69 ); ipworksssl_telnet_set($res, 69, $value );
Default Value
''
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.
When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.
This property is not available at design time.
Data Type
Binary String
SSLProvider Property (IPWorksSSL_Telnet Class)
This property specifies the Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.
Object Oriented Interface
public function getSSLProvider(); public function setSSLProvider($value);
Procedural Interface
ipworksssl_telnet_get($res, 70 ); ipworksssl_telnet_set($res, 70, $value );
Default Value
0
Remarks
This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.
Possible values are as follows:
0 (sslpAutomatic - default) | Automatically selects the appropriate implementation. |
1 (sslpPlatform) | Uses the platform/system implementation. |
2 (sslpInternal) | Uses the internal implementation. |
In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.
When Automatic is selected, on Windows, the class will use the platform implementation. On Linux/macOS, the class will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used on all platforms.
Data Type
Integer
SSLServerCertEffectiveDate Property (IPWorksSSL_Telnet Class)
This is the date on which this certificate becomes valid.
Object Oriented Interface
public function getSSLServerCertEffectiveDate();
Procedural Interface
ipworksssl_telnet_get($res, 71 );
Default Value
''
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
Data Type
String
SSLServerCertExpirationDate Property (IPWorksSSL_Telnet Class)
This is the date the certificate expires.
Object Oriented Interface
public function getSSLServerCertExpirationDate();
Procedural Interface
ipworksssl_telnet_get($res, 72 );
Default Value
''
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
Data Type
String
SSLServerCertExtendedKeyUsage Property (IPWorksSSL_Telnet Class)
This is a comma-delimited list of extended key usage identifiers.
Object Oriented Interface
public function getSSLServerCertExtendedKeyUsage();
Procedural Interface
ipworksssl_telnet_get($res, 73 );
Default Value
''
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
Data Type
String
SSLServerCertFingerprint Property (IPWorksSSL_Telnet Class)
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Object Oriented Interface
public function getSSLServerCertFingerprint();
Procedural Interface
ipworksssl_telnet_get($res, 74 );
Default Value
''
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
Data Type
String
SSLServerCertFingerprintSHA1 Property (IPWorksSSL_Telnet Class)
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Object Oriented Interface
public function getSSLServerCertFingerprintSHA1();
Procedural Interface
ipworksssl_telnet_get($res, 75 );
Default Value
''
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
Data Type
String
SSLServerCertFingerprintSHA256 Property (IPWorksSSL_Telnet Class)
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Object Oriented Interface
public function getSSLServerCertFingerprintSHA256();
Procedural Interface
ipworksssl_telnet_get($res, 76 );
Default Value
''
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
Data Type
String
SSLServerCertIssuer Property (IPWorksSSL_Telnet Class)
This is the issuer of the certificate.
Object Oriented Interface
public function getSSLServerCertIssuer();
Procedural Interface
ipworksssl_telnet_get($res, 77 );
Default Value
''
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
Data Type
String
SSLServerCertPrivateKey Property (IPWorksSSL_Telnet Class)
This is the private key of the certificate (if available).
Object Oriented Interface
public function getSSLServerCertPrivateKey();
Procedural Interface
ipworksssl_telnet_get($res, 78 );
Default Value
''
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.
This property is read-only.
Data Type
String
SSLServerCertPrivateKeyAvailable Property (IPWorksSSL_Telnet Class)
This property shows whether a PrivateKey is available for the selected certificate.
Object Oriented Interface
public function getSSLServerCertPrivateKeyAvailable();
Procedural Interface
ipworksssl_telnet_get($res, 79 );
Default Value
false
Remarks
This property shows whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
Data Type
Boolean
SSLServerCertPrivateKeyContainer Property (IPWorksSSL_Telnet Class)
This is the name of the PrivateKey container for the certificate (if available).
Object Oriented Interface
public function getSSLServerCertPrivateKeyContainer();
Procedural Interface
ipworksssl_telnet_get($res, 80 );
Default Value
''
Remarks
This is the name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
Data Type
String
SSLServerCertPublicKey Property (IPWorksSSL_Telnet Class)
This is the public key of the certificate.
Object Oriented Interface
public function getSSLServerCertPublicKey();
Procedural Interface
ipworksssl_telnet_get($res, 81 );
Default Value
''
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
Data Type
String
SSLServerCertPublicKeyAlgorithm Property (IPWorksSSL_Telnet Class)
This property contains the textual description of the certificate's public key algorithm.
Object Oriented Interface
public function getSSLServerCertPublicKeyAlgorithm();
Procedural Interface
ipworksssl_telnet_get($res, 82 );
Default Value
''
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLServerCertPublicKeyLength Property (IPWorksSSL_Telnet Class)
This is the length of the certificate's public key (in bits).
Object Oriented Interface
public function getSSLServerCertPublicKeyLength();
Procedural Interface
ipworksssl_telnet_get($res, 83 );
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
Data Type
Integer
SSLServerCertSerialNumber Property (IPWorksSSL_Telnet Class)
This is the serial number of the certificate encoded as a string.
Object Oriented Interface
public function getSSLServerCertSerialNumber();
Procedural Interface
ipworksssl_telnet_get($res, 84 );
Default Value
''
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
Data Type
String
SSLServerCertSignatureAlgorithm Property (IPWorksSSL_Telnet Class)
The property contains the text description of the certificate's signature algorithm.
Object Oriented Interface
public function getSSLServerCertSignatureAlgorithm();
Procedural Interface
ipworksssl_telnet_get($res, 85 );
Default Value
''
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLServerCertStore Property (IPWorksSSL_Telnet Class)
This is the name of the certificate store for the client certificate.
Object Oriented Interface
public function getSSLServerCertStore();
Procedural Interface
ipworksssl_telnet_get($res, 86 );
Default Value
'MY'
Remarks
This is the name of the certificate store for the client certificate.
The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password protected, specify the password in SSLServerCertStorePassword.
SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
This property is read-only.
Data Type
Binary String
SSLServerCertStorePassword Property (IPWorksSSL_Telnet Class)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Object Oriented Interface
public function getSSLServerCertStorePassword();
Procedural Interface
ipworksssl_telnet_get($res, 87 );
Default Value
''
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
This property is read-only.
Data Type
String
SSLServerCertStoreType Property (IPWorksSSL_Telnet Class)
This is the type of certificate store for this certificate.
Object Oriented Interface
public function getSSLServerCertStoreType();
Procedural Interface
ipworksssl_telnet_get($res, 88 );
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLServerCertStore and set SSLServerCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
This property is read-only.
Data Type
Integer
SSLServerCertSubjectAltNames Property (IPWorksSSL_Telnet Class)
This property contains comma-separated lists of alternative subject names for the certificate.
Object Oriented Interface
public function getSSLServerCertSubjectAltNames();
Procedural Interface
ipworksssl_telnet_get($res, 89 );
Default Value
''
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
Data Type
String
SSLServerCertThumbprintMD5 Property (IPWorksSSL_Telnet Class)
This property contains the MD5 hash of the certificate.
Object Oriented Interface
public function getSSLServerCertThumbprintMD5();
Procedural Interface
ipworksssl_telnet_get($res, 90 );
Default Value
''
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLServerCertThumbprintSHA1 Property (IPWorksSSL_Telnet Class)
This property contains the SHA-1 hash of the certificate.
Object Oriented Interface
public function getSSLServerCertThumbprintSHA1();
Procedural Interface
ipworksssl_telnet_get($res, 91 );
Default Value
''
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLServerCertThumbprintSHA256 Property (IPWorksSSL_Telnet Class)
This property contains the SHA-256 hash of the certificate.
Object Oriented Interface
public function getSSLServerCertThumbprintSHA256();
Procedural Interface
ipworksssl_telnet_get($res, 92 );
Default Value
''
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLServerCertUsage Property (IPWorksSSL_Telnet Class)
This property contains the text description of UsageFlags .
Object Oriented Interface
public function getSSLServerCertUsage();
Procedural Interface
ipworksssl_telnet_get($res, 93 );
Default Value
''
Remarks
This property contains the text description of SSLServerCertUsageFlags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
Data Type
String
SSLServerCertUsageFlags Property (IPWorksSSL_Telnet Class)
This property contains the flags that show intended use for the certificate.
Object Oriented Interface
public function getSSLServerCertUsageFlags();
Procedural Interface
ipworksssl_telnet_get($res, 94 );
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
Data Type
Integer
SSLServerCertVersion Property (IPWorksSSL_Telnet Class)
This property contains the certificate's version number.
Object Oriented Interface
public function getSSLServerCertVersion();
Procedural Interface
ipworksssl_telnet_get($res, 95 );
Default Value
''
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
Data Type
String
SSLServerCertSubject Property (IPWorksSSL_Telnet Class)
This is the subject of the certificate used for client authentication.
Object Oriented Interface
public function getSSLServerCertSubject();
Procedural Interface
ipworksssl_telnet_get($res, 96 );
Default Value
''
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
This property is read-only.
Data Type
String
SSLServerCertEncoded Property (IPWorksSSL_Telnet Class)
This is the certificate (PEM/Base64 encoded).
Object Oriented Interface
public function getSSLServerCertEncoded();
Procedural Interface
ipworksssl_telnet_get($res, 97 );
Default Value
''
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.
When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.
This property is read-only and not available at design time.
Data Type
Binary String
SSLStartMode Property (IPWorksSSL_Telnet Class)
This property determines how the class starts the Secure Sockets Layer (SSL) negotiation.
Object Oriented Interface
public function getSSLStartMode(); public function setSSLStartMode($value);
Procedural Interface
ipworksssl_telnet_get($res, 98 ); ipworksssl_telnet_set($res, 98, $value );
Default Value
0
Remarks
The SSLStartMode property may have one of the following values:
0 (sslAutomatic) | If the remote port is set to the standard plaintext port of the protocol (where applicable), the class will behave the same as if SSLStartMode is set to sslExplicit. In all other cases, SSL negotiation will be implicit (sslImplicit). |
1 (sslImplicit) | The SSL negotiation will start immediately after the connection is established. |
2 (sslExplicit) | The class will first connect in plaintext, and then will explicitly start SSL negotiation through a protocol command such as STARTTLS. |
Data Type
Integer
Timeout Property (IPWorksSSL_Telnet Class)
This property specifies the timeout for the class.
Object Oriented Interface
public function getTimeout(); public function setTimeout($value);
Procedural Interface
ipworksssl_telnet_get($res, 99 ); ipworksssl_telnet_set($res, 99, $value );
Default Value
0
Remarks
If the Timeout property is set to 0, all operations return immediately, potentially failing with an WOULDBLOCK error if data cannot be sent or received immediately.
If Timeout is set to a positive value, the class will automatically retry each operation that otherwise would result in a WOULDBLOCK error for a maximum of Timeout seconds.
The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.
If Timeout expires, and the operation is not yet complete, the class fails with an error.
Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.
The default value for the Timeout property is 0 (asynchronous operation).
Data Type
Integer
Transparent Property (IPWorksSSL_Telnet Class)
When this property is True, Telnet command processing is disabled.
Object Oriented Interface
public function getTransparent(); public function setTransparent($value);
Procedural Interface
ipworksssl_telnet_get($res, 100 ); ipworksssl_telnet_set($res, 100, $value );
Default Value
false
Remarks
The Transparent property allows you to enable or disable Telnet command processing. When command processing is disabled, any data received are provided with no modifications.
Data Type
Boolean
Config Method (IPWorksSSL_Telnet Class)
Sets or retrieves a configuration setting.
Object Oriented Interface
public function doConfig($configurationstring);
Procedural Interface
ipworksssl_telnet_do_config($res, $configurationstring);
Remarks
Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
Connect Method (IPWorksSSL_Telnet Class)
This method connects to a remote host.
Object Oriented Interface
public function doConnect();
Procedural Interface
ipworksssl_telnet_do_connect($res);
Remarks
This method connects to the remote host specified by RemoteHost. For instance:
component.RemoteHost = "MyHostNameOrIP";
component.Connect();
To specify a nonstandard port number, set RemotePort before calling this method.
ConnectTo Method (IPWorksSSL_Telnet Class)
This method connects to a remote host.
Object Oriented Interface
public function doConnectTo($host);
Procedural Interface
ipworksssl_telnet_do_connectto($res, $host);
Remarks
This method connects to the remote host specified by the Host. For instance:
component.Connect("MyTelnetServer");
To specify a nonstandard port number set RemotePort before calling this method.
Disconnect Method (IPWorksSSL_Telnet Class)
This method disconnects from the remote host.
Object Oriented Interface
public function doDisconnect();
Procedural Interface
ipworksssl_telnet_do_disconnect($res);
Remarks
Calling this method is equivalent to setting the Connected property to False.
DoEvents Method (IPWorksSSL_Telnet Class)
This method processes events from the internal message queue.
Object Oriented Interface
public function doEvents();
Procedural Interface
ipworksssl_telnet_do_doevents($res);
Remarks
When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.
PauseData Method (IPWorksSSL_Telnet Class)
This method pauses data reception.
Object Oriented Interface
public function doPauseData();
Procedural Interface
ipworksssl_telnet_do_pausedata($res);
Remarks
This method pauses data reception when called. While data reception is paused, the DataIn event will not fire. Call ProcessData to reenable data reception.
ProcessData Method (IPWorksSSL_Telnet Class)
This method reenables data reception after a call to PauseData .
Object Oriented Interface
public function doProcessData();
Procedural Interface
ipworksssl_telnet_do_processdata($res);
Remarks
This method reenables data reception after a previous call to PauseData. When PauseData is called, the DataIn event will not fire. To reenable data reception and allow DataIn to fire, call this method.
Note: This method is used only after previously calling PauseData. It does not need to be called to process incoming data by default.
Reset Method (IPWorksSSL_Telnet Class)
This method will reset the class.
Object Oriented Interface
public function doReset();
Procedural Interface
ipworksssl_telnet_do_reset($res);
Remarks
This method will reset the class's properties to their default values.
Send Method (IPWorksSSL_Telnet Class)
This method sends binary data to the remote host.
Object Oriented Interface
public function doSend($text);
Procedural Interface
ipworksssl_telnet_do_send($res, $text);
Remarks
This method sends the specified binary data to the remote host. To send text, use the SendText method instead.
SendBytes Method (IPWorksSSL_Telnet Class)
This method sends binary data to the remote host.
Object Oriented Interface
public function doSendBytes($data);
Procedural Interface
ipworksssl_telnet_do_sendbytes($res, $data);
Remarks
This method sends the specified binary data to the remote host. To send text, use the SendText method instead.
SendCommand Method (IPWorksSSL_Telnet Class)
This method sends a single-character Telnet command code to the server.
Object Oriented Interface
public function doSendCommand($command);
Procedural Interface
ipworksssl_telnet_do_sendcommand($res, $command);
Remarks
This method sends the single-character command code specified by Command to the server. Codes for Telnet commands and their meanings are defined in the Telnet RFCs. Some common commands are as follows:
241 (NOP) | No operation. |
242 (Data Mark) | The data stream portion of a Synch. This code should always be accompanied by a TCP Urgent notification. |
243 (Break) | NVT character BRK. |
244 (Interrupt Process) | The function IP. |
245 (Abort Output) | The function AO. |
246 (Are You There) | The function AYT. |
247 (Erase Character) | The function EC. |
248 (Erase Line) | The function EL. |
249 (Go Ahead) | The GA signal. |
SendDontOption Method (IPWorksSSL_Telnet Class)
This method sends a single-character Telnet option code to the server with the Telnet DONT command.
Object Oriented Interface
public function doSendDontOption($dontoption);
Procedural Interface
ipworksssl_telnet_do_senddontoption($res, $dontoption);
Remarks
For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:
0 (TRANSMIT-BINARY) | Enables or disables binary (8 bit) transmission. |
1 (ECHO) | Telnet ECHO option. Specifies whether or not bytes sent should be echoed. |
3 (SUPPRESS-GO-AHEAD) | Used to enable or disable transmission of the Telnet GO_AHEAD command. |
24 (TERMINAL-TYPE) | Allows or disallows terminal-type negotiation. |
31 (NAWS) | Allows or disallows window size negotiation. |
SendDoOption Method (IPWorksSSL_Telnet Class)
This method sends a single-character Telnet option code to the server with the Telnet DO command.
Object Oriented Interface
public function doSendDoOption($dooption);
Procedural Interface
ipworksssl_telnet_do_senddooption($res, $dooption);
Remarks
For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:
0 (TRANSMIT-BINARY) | Enables or disables binary (8 bit) transmission. |
1 (ECHO) | Telnet ECHO option. Specifies whether or not bytes sent should be echoed. |
3 (SUPPRESS-GO-AHEAD) | Used to enable or disable transmission of the Telnet GO_AHEAD command. |
24 (TERMINAL-TYPE) | Allows or disallows terminal-type negotiation. |
31 (NAWS) | Allows or disallows window size negotiation. |
SendDoSubOption Method (IPWorksSSL_Telnet Class)
This methods sends a Telnet SubOption to send to the server with the SubOption command.
Object Oriented Interface
public function doSendDoSubOption($dosuboption);
Procedural Interface
ipworksssl_telnet_do_senddosuboption($res, $dosuboption);
Remarks
Valid suboptions and their descriptions are defined in the Telnet RFCs.
For example, to send a terminal type suboption to request setting the terminal type to 'vt100', send ASCII 24, followed by ASCII 0, followed by vt100.
Suboption start and end codes are automatically added by the class.
SendText Method (IPWorksSSL_Telnet Class)
This method sends text to the remote host.
Object Oriented Interface
public function doSendText($text);
Procedural Interface
ipworksssl_telnet_do_sendtext($res, $text);
Remarks
This method sends the specified text to the remote host. To send binary data, use the SendBytes method instead.
SendUrgentBytes Method (IPWorksSSL_Telnet Class)
This method urgently sends binary data to the remote host.
Object Oriented Interface
public function doSendUrgentBytes($urgentbytes);
Procedural Interface
ipworksssl_telnet_do_sendurgentbytes($res, $urgentbytes);
Remarks
This method sends the bytes specified by UrgentBytes as urgent data (out-of-band) to the remote host. To send text urgently, use the SendUrgentText method instead.
Data sent using this method will bypass the normal Transmission Control Protocol (TCP) queuing mechanism. Use this method with caution.
SendUrgentText Method (IPWorksSSL_Telnet Class)
This method urgently sends text to the remote host.
Object Oriented Interface
public function doSendUrgentText($urgenttext);
Procedural Interface
ipworksssl_telnet_do_sendurgenttext($res, $urgenttext);
Remarks
This method sends the text specified by UrgentText as urgent data (out-of-band) to the remote host. To send binary data urgently, use the SendUrgentBytes method instead.
Data sent using this method will bypass the normal Transmission Control Protocol (TCP) queuing mechanism. Use this method with caution.
SendWillOption Method (IPWorksSSL_Telnet Class)
This method sends a single-character Telnet option code the server with the Telnet WILL command.
Object Oriented Interface
public function doSendWillOption($willoption);
Procedural Interface
ipworksssl_telnet_do_sendwilloption($res, $willoption);
Remarks
For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:
0 (TRANSMIT-BINARY) | Enables or disables binary (8 bit) transmission. |
1 (ECHO) | Telnet ECHO option. Specifies whether or not bytes sent should be echoed. |
3 (SUPPRESS-GO-AHEAD) | Used to enable or disable transmission of the Telnet GO_AHEAD command. |
24 (TERMINAL-TYPE) | Allows or disallows terminal-type negotiation. |
31 (NAWS) | Allows or disallows window size negotiation. |
SendWontOption Method (IPWorksSSL_Telnet Class)
This method sends a single-character Telnet option code to the server with the Telnet WONT command.
Object Oriented Interface
public function doSendWontOption($wontoption);
Procedural Interface
ipworksssl_telnet_do_sendwontoption($res, $wontoption);
Remarks
For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:
0 (TRANSMIT-BINARY) | Enables or disables binary (8 bit) transmission. |
1 (ECHO) | Telnet ECHO option. Specifies whether or not bytes sent should be echoed. |
3 (SUPPRESS-GO-AHEAD) | Used to enable or disable transmission of the Telnet GO_AHEAD command. |
24 (TERMINAL-TYPE) | Allows or disallows terminal-type negotiation. |
31 (NAWS) | Allows or disallows window size negotiation. |
Command Event (IPWorksSSL_Telnet Class)
This event is fired when a Telnet command comes from the Telnet server.
Object Oriented Interface
public function fireCommand($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 1, array($this, 'fireCommand'));
Parameter List
'commandcode'
Remarks
Codes for Telnet commands and their meanings are defined in the Telnet RFCs. Following are some examples:
241 (NOP) | No operation. |
242 (Data Mark) | The data stream portion of a Synch. This code should always be accompanied by a TCP Urgent notification. |
243 (Break) | NVT character BRK. |
244 (Interrupt Process) | The function IP. |
245 (Abort Output) | The function AO. |
246 (Are You There) | The function AYT. |
247 (Erase Character) | The function EC. |
248 (Erase Line) | The function EL. |
249 (Go Ahead) | The GA signal. |
Connected Event (IPWorksSSL_Telnet Class)
This event is fired immediately after a connection completes (or fails).
Object Oriented Interface
public function fireConnected($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 2, array($this, 'fireConnected'));
Parameter List
'statuscode'
'description'
Remarks
If the connection is made normally, StatusCode is 0 and Description is "OK".
If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.
Please refer to the Error Codes section for more information.
ConnectionStatus Event (IPWorksSSL_Telnet Class)
This event is fired to indicate changes in the connection state.
Object Oriented Interface
public function fireConnectionStatus($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 3, array($this, 'fireConnectionStatus'));
Parameter List
'connectionevent'
'statuscode'
'description'
Remarks
The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.
The ConnectionEvent parameter indicates the type of connection event. Values may include the following:
Firewall connection complete. | |
Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable). | |
Remote host connection complete. | |
Remote host disconnected. | |
SSL or S/Shell connection broken. | |
Firewall host disconnected. |
DataIn Event (IPWorksSSL_Telnet Class)
This event is fired when data are received from the remote host.
Object Oriented Interface
public function fireDataIn($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 4, array($this, 'fireDataIn'));
Parameter List
'text'
Remarks
Trapping the DataIn event is your only chance to get the data coming from the other end of the connection. Incoming data are provided through the Text parameter.
Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.
Disconnected Event (IPWorksSSL_Telnet Class)
This event is fired when a connection is closed.
Object Oriented Interface
public function fireDisconnected($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 5, array($this, 'fireDisconnected'));
Parameter List
'statuscode'
'description'
Remarks
If the connection is broken normally, StatusCode is 0 and Description is "OK".
If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.
Please refer to the Error Codes section for more information.
Do Event (IPWorksSSL_Telnet Class)
This event is fired when a Telnet DO OPTION command comes from the Telnet server.
Object Oriented Interface
public function fireDo($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 6, array($this, 'fireDo'));
Parameter List
'optioncode'
Remarks
The OptionCode parameter identifies the option code. For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:
0 (TRANSMIT-BINARY) | Enables or disables binary (8 bit) transmission. |
1 (ECHO) | Telnet ECHO option. Specifies whether or not bytes sent should be echoed. |
3 (SUPPRESS-GO-AHEAD) | Used to enable or disable transmission of the Telnet GO_AHEAD command. |
24 (TERMINAL-TYPE) | Allows or disallows terminal-type negotiation. |
31 (NAWS) | Allows or disallows window size negotiation. |
Dont Event (IPWorksSSL_Telnet Class)
This event is fired when a Telnet DONT OPTION command comes from the Telnet server.
Object Oriented Interface
public function fireDont($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 7, array($this, 'fireDont'));
Parameter List
'optioncode'
Remarks
The OptionCode parameter identifies the option code. For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:
0 (TRANSMIT-BINARY) | Enables or disables binary (8 bit) transmission. |
1 (ECHO) | Telnet ECHO option. Specifies whether or not bytes sent should be echoed. |
3 (SUPPRESS-GO-AHEAD) | Used to enable or disable transmission of the Telnet GO_AHEAD command. |
24 (TERMINAL-TYPE) | Allows or disallows terminal-type negotiation. |
31 (NAWS) | Allows or disallows window size negotiation. |
Error Event (IPWorksSSL_Telnet Class)
Fired when information is available about errors during data delivery.
Object Oriented Interface
public function fireError($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 8, array($this, 'fireError'));
Parameter List
'errorcode'
'description'
Remarks
The Error event is fired in case of exceptional conditions during message processing. Normally the class fails with an error.
The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.
ReadyToSend Event (IPWorksSSL_Telnet Class)
This event is fired when the class is ready to send data.
Object Oriented Interface
public function fireReadyToSend($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 9, array($this, 'fireReadyToSend'));
Parameter List
Remarks
The ReadyToSend event indicates that the underlying Transmission Control Protocol (TCP)/IP subsystem is ready to accept data after a failed SendBytes. The event is also fired immediately after a connection to the remote host is established.
SSLServerAuthentication Event (IPWorksSSL_Telnet Class)
Fired after the server presents its certificate to the client.
Object Oriented Interface
public function fireSSLServerAuthentication($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 10, array($this, 'fireSSLServerAuthentication'));
Parameter List
'certencoded'
'certsubject'
'certissuer'
'status'
'accept'
Remarks
During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.
When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.
SSLStatus Event (IPWorksSSL_Telnet Class)
Fired when secure connection progress messages are available.
Object Oriented Interface
public function fireSSLStatus($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 11, array($this, 'fireSSLStatus'));
Parameter List
'message'
Remarks
The event is fired for informational and logging purposes only. This event tracks the progress of the connection.
SubOption Event (IPWorksSSL_Telnet Class)
This event is fired when a Telnet SubOption command comes from the Telnet server.
Object Oriented Interface
public function fireSubOption($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 12, array($this, 'fireSubOption'));
Parameter List
'suboption'
Remarks
The SubOption parameter contains the suboption data as sent by the other end. The enclosing suboption command codes are stripped away.
For a list of valid Telnet suboptions and their descriptions, please look at the Telnet RFCs.
Will Event (IPWorksSSL_Telnet Class)
This event is fired when a Telnet WILL OPTION command comes from the Telnet server.
Object Oriented Interface
public function fireWill($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 13, array($this, 'fireWill'));
Parameter List
'optioncode'
Remarks
For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:
0 (TRANSMIT-BINARY) | Enables or disables binary (8 bit) transmission. |
1 (ECHO) | Telnet ECHO option. Specifies whether or not bytes sent should be echoed. |
3 (SUPPRESS-GO-AHEAD) | Used to enable or disable transmission of the Telnet GO_AHEAD command. |
24 (TERMINAL-TYPE) | Allows or disallows terminal-type negotiation. |
31 (NAWS) | Allows or disallows window size negotiation. |
Wont Event (IPWorksSSL_Telnet Class)
This event is fired when a Telnet WONT OPTION command comes from the Telnet server.
Object Oriented Interface
public function fireWont($param);
Procedural Interface
ipworksssl_telnet_register_callback($res, 14, array($this, 'fireWont'));
Parameter List
'optioncode'
Remarks
The OptionCode parameter identifies the option code. For a list of option codes and their descriptions, please look at the Telnet RFCs. Following are a few examples:
0 (TRANSMIT-BINARY) | Enables or disables binary (8 bit) transmission. |
1 (ECHO) | Telnet ECHO option. Specifies whether or not bytes sent should be echoed. |
3 (SUPPRESS-GO-AHEAD) | Used to enable or disable transmission of the Telnet GO_AHEAD command. |
24 (TERMINAL-TYPE) | Allows or disallows terminal-type negotiation. |
31 (NAWS) | Allows or disallows window size negotiation. |
Config Settings (Telnet Class)
The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.TCPClient Config Settings
If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties.
0 | No firewall (default setting). |
1 | Connect through a tunneling proxy. FirewallPort is set to 80. |
2 | Connect through a SOCKS4 Proxy. FirewallPort is set to 1080. |
3 | Connect through a SOCKS5 Proxy. FirewallPort is set to 1080. |
10 | Connect through a SOCKS4A Proxy. FirewallPort is set to 1080. |
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This value is not applicable in macOS.
In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.
In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.
The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).
Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.
In multihomed hosts (machines with more than one IP interface), setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.
If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).
Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.
LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.
This configuration setting is useful when trying to connect to services that require a trusted port on the client side. An example is the remote shell (rsh) service in UNIX systems.
If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.
If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.
The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.
www.google.com;www.nsoftware.com
Note: This value is not applicable in Java.
By default, this configuration setting is set to False.
0 | IPv4 only |
1 | IPv6 only |
2 | IPv6 with IPv4 fallback |
SSL Config Settings
When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.
Enabling this configuration setting has no effect if SSLProvider is set to Platform.
The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g., 9d66eef0.0, 9d66eef0.1). OpenSSL recommends the use of the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.
The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by the following sequences:
-----BEGIN CERTIFICATE-----
... (CA certificate in base64 encoding) ...
-----END CERTIFICATE-----
Before, between, and after the certificate text is allowed, which can be used, for example, for descriptions of the certificates. Refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.
The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".
By default, OpenSSL uses the device file "/dev/urandom" to seed the PRNG, and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.
If set to True, the class will reuse the context if and only if the following criteria are met:
- The target host name is the same.
- The system cache entry has not expired (default timeout is 10 hours).
- The application process that calls the function is the same.
- The logon session is the same.
- The instance of the class is the same.
The value is formatted as a list of paths separated by semicolons. The class will check for the existence of each file in the order specified. When a file is found, the CA certificates within the file will be loaded and used to determine the validity of server or client certificates.
The default value is as follows:
/etc/ssl/ca-bundle.pem;/etc/pki/tls/certs/ca-bundle.crt;/etc/ssl/certs/ca-certificates.crt;/etc/pki/tls/cacert.pem
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermedaite Cert ... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert ... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE-----
When set to 0 (default), the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but it will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.
This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.
When set to 0 (default), the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but it will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.
This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.
Note: This configuration setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.
Use this configuration setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.
When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList configuration setting.
The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermediate Cert ... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert ... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE-----
By default, the enabled cipher suites will include all available ciphers ("*").
The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.
Multiple cipher suites are separated by semicolons.
Example values when SSLProvider is set to Platform include the following:
obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=CALG_AES_256");
obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES");
Possible values when SSLProvider is set to Platform include the following:
- CALG_3DES
- CALG_3DES_112
- CALG_AES
- CALG_AES_128
- CALG_AES_192
- CALG_AES_256
- CALG_AGREEDKEY_ANY
- CALG_CYLINK_MEK
- CALG_DES
- CALG_DESX
- CALG_DH_EPHEM
- CALG_DH_SF
- CALG_DSS_SIGN
- CALG_ECDH
- CALG_ECDH_EPHEM
- CALG_ECDSA
- CALG_ECMQV
- CALG_HASH_REPLACE_OWF
- CALG_HUGHES_MD5
- CALG_HMAC
- CALG_KEA_KEYX
- CALG_MAC
- CALG_MD2
- CALG_MD4
- CALG_MD5
- CALG_NO_SIGN
- CALG_OID_INFO_CNG_ONLY
- CALG_OID_INFO_PARAMETERS
- CALG_PCT1_MASTER
- CALG_RC2
- CALG_RC4
- CALG_RC5
- CALG_RSA_KEYX
- CALG_RSA_SIGN
- CALG_SCHANNEL_ENC_KEY
- CALG_SCHANNEL_MAC_KEY
- CALG_SCHANNEL_MASTER_HASH
- CALG_SEAL
- CALG_SHA
- CALG_SHA1
- CALG_SHA_256
- CALG_SHA_384
- CALG_SHA_512
- CALG_SKIPJACK
- CALG_SSL2_MASTER
- CALG_SSL3_MASTER
- CALG_SSL3_SHAMD5
- CALG_TEK
- CALG_TLS1_MASTER
- CALG_TLS1PRF
obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_ECDH_RSA_WITH_AES_128_CBC_SHA");
Possible values when SSLProvider is set to Internal include the following:
- TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
- TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
- TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
- TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
- TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
- TLS_RSA_WITH_AES_256_GCM_SHA384
- TLS_RSA_WITH_AES_128_GCM_SHA256
- TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
- TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
- TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
- TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
- TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
- TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
- TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
- TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
- TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
- TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
- TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
- TLS_RSA_WITH_AES_256_CBC_SHA256
- TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
- TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
- TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
- TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
- TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
- TLS_RSA_WITH_AES_128_CBC_SHA256
- TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
- TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
- TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
- TLS_RSA_WITH_AES_256_CBC_SHA
- TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
- TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
- TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
- TLS_DHE_RSA_WITH_AES_256_CBC_SHA
- TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
- TLS_DHE_DSS_WITH_AES_256_CBC_SHA
- TLS_RSA_WITH_AES_128_CBC_SHA
- TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
- TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
- TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
- TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
- TLS_DHE_RSA_WITH_AES_128_CBC_SHA
- TLS_DHE_DSS_WITH_AES_128_CBC_SHA
- TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
- TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
- TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
- TLS_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_RSA_WITH_DES_CBC_SHA
- TLS_DHE_RSA_WITH_DES_CBC_SHA
- TLS_DHE_DSS_WITH_DES_CBC_SHA
- TLS_RSA_WITH_RC4_128_MD5
- TLS_RSA_WITH_RC4_128_SHA
When TLS 1.3 is negotiated (see SSLEnabledProtocols), only the following cipher suites are supported:
- TLS_AES_256_GCM_SHA384
- TLS_CHACHA20_POLY1305_SHA256
- TLS_AES_128_GCM_SHA256
SSLEnabledCipherSuites is used together with SSLCipherStrength.
Not all supported protocols are enabled by default. The default value is 4032 for client components, and 3072 for server components. To specify a combination of enabled protocol versions set this config to the binary OR of one or more of the following values:
TLS1.3 | 12288 (Hex 3000) |
TLS1.2 | 3072 (Hex C00) (Default - Client and Server) |
TLS1.1 | 768 (Hex 300) (Default - Client) |
TLS1 | 192 (Hex C0) (Default - Client) |
SSL3 | 48 (Hex 30) |
SSL2 | 12 (Hex 0C) |
Note that only TLS 1.2 is enabled for server components that accept incoming connections. This adheres to industry standards to ensure a secure connection. Client components enable TLS 1.0, TLS 1.1, and TLS 1.2 by default and will negotiate the highest mutually supported version when connecting to a server, which should be TLS 1.2 in most cases.
SSLEnabledProtocols: Transport Layer Security (TLS) 1.3 Notes:
By default when TLS 1.3 is enabled, the class will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.
In editions that are designed to run on Windows, SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is supported only on Windows 11/Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.
If set to 1 (Platform provider), please be aware of the following notes:
- The platform provider is available only on Windows 11/Windows Server 2022 and up.
- SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
- If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2, these restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.
SSLEnabledProtocols: SSL2 and SSL3 Notes:
SSL 2.0 and 3.0 are not supported by the class when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.
This configuration setting is applicable only when SSLProvider is set to Internal.
If set to True, all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.
When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools, such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffic for debugging purposes. When writing to this file, the class will only append, it will not overwrite previous values.
Note: This configuration setting is applicable only when SSLProvider is set to Internal.
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedCipher[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedCipherStrength[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedCipherSuite[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedKeyExchange[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedKeyExchangeStrength[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedVersion[connId]");
0x00000001 | Ignore time validity status of certificate. |
0x00000002 | Ignore time validity status of CTL. |
0x00000004 | Ignore non-nested certificate times. |
0x00000010 | Allow unknown certificate authority. |
0x00000020 | Ignore wrong certificate usage. |
0x00000100 | Ignore unknown certificate revocation status. |
0x00000200 | Ignore unknown CTL signer revocation status. |
0x00000400 | Ignore unknown certificate authority revocation status. |
0x00000800 | Ignore unknown root revocation status. |
0x00008000 | Allow test root certificate. |
0x00004000 | Trust test root certificate. |
0x80000000 | Ignore non-matching CN (certificate CN non-matching server name). |
This functionality is currently not available when the provider is OpenSSL.
The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermediate Cert... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE-----
When specified the class will verify that the server certificate signature algorithm is among the values specified in this configuration setting. If the server certificate signature algorithm is unsupported, the class fails with an error.
The format of this value is a comma-separated list of hash-signature combinations. For instance:
component.SSLProvider = TCPClientSSLProviders.sslpInternal;
component.Config("SSLEnabledProtocols=3072"); //TLS 1.2
component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa");
The default value for this configuration setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.
To not restrict the server's certificate signature algorithm, specify an empty string as the value for this configuration setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.
The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.
When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:
- "ecdhe_secp256r1" (default)
- "ecdhe_secp384r1" (default)
- "ecdhe_secp521r1" (default)
The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result, only some groups are included by default in this configuration setting.
Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used that is not present in this list, it will incur an additional roundtrip and time to generate the key share for that group.
In most cases, this configuration setting does not need to be modified. This should be modified only if there is a specific reason to do so.
The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072
The values are ordered from most preferred to least preferred. The following values are supported:
- "ecdhe_x25519" (default)
- "ecdhe_x448"
- "ecdhe_secp256r1" (default)
- "ecdhe_secp384r1" (default)
- "ecdhe_secp521r1"
- "ffdhe_2048" (default)
- "ffdhe_3072" (default)
- "ffdhe_4096"
- "ffdhe_6144"
- "ffdhe_8192"
- "ed25519" (default)
- "ed448" (default)
- "ecdsa_secp256r1_sha256" (default)
- "ecdsa_secp384r1_sha384" (default)
- "ecdsa_secp521r1_sha512" (default)
- "rsa_pkcs1_sha256" (default)
- "rsa_pkcs1_sha384" (default)
- "rsa_pkcs1_sha512" (default)
- "rsa_pss_sha256" (default)
- "rsa_pss_sha384" (default)
- "rsa_pss_sha512" (default)
The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192
The values are ordered from most preferred to least preferred. The following values are supported:
- "ecdhe_x25519" (default)
- "ecdhe_x448" (default)
- "ecdhe_secp256r1" (default)
- "ecdhe_secp384r1" (default)
- "ecdhe_secp521r1" (default)
- "ffdhe_2048" (default)
- "ffdhe_3072" (default)
- "ffdhe_4096" (default)
- "ffdhe_6144" (default)
- "ffdhe_8192" (default)
Socket Config Settings
Note: This option is not valid for User Datagram Protocol (UDP) ports.
Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.
Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.
Base Config Settings
The following is a list of valid code page identifiers:
Identifier | Name |
037 | IBM EBCDIC - U.S./Canada |
437 | OEM - United States |
500 | IBM EBCDIC - International |
708 | Arabic - ASMO 708 |
709 | Arabic - ASMO 449+, BCON V4 |
710 | Arabic - Transparent Arabic |
720 | Arabic - Transparent ASMO |
737 | OEM - Greek (formerly 437G) |
775 | OEM - Baltic |
850 | OEM - Multilingual Latin I |
852 | OEM - Latin II |
855 | OEM - Cyrillic (primarily Russian) |
857 | OEM - Turkish |
858 | OEM - Multilingual Latin I + Euro symbol |
860 | OEM - Portuguese |
861 | OEM - Icelandic |
862 | OEM - Hebrew |
863 | OEM - Canadian-French |
864 | OEM - Arabic |
865 | OEM - Nordic |
866 | OEM - Russian |
869 | OEM - Modern Greek |
870 | IBM EBCDIC - Multilingual/ROECE (Latin-2) |
874 | ANSI/OEM - Thai (same as 28605, ISO 8859-15) |
875 | IBM EBCDIC - Modern Greek |
932 | ANSI/OEM - Japanese, Shift-JIS |
936 | ANSI/OEM - Simplified Chinese (PRC, Singapore) |
949 | ANSI/OEM - Korean (Unified Hangul Code) |
950 | ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) |
1026 | IBM EBCDIC - Turkish (Latin-5) |
1047 | IBM EBCDIC - Latin 1/Open System |
1140 | IBM EBCDIC - U.S./Canada (037 + Euro symbol) |
1141 | IBM EBCDIC - Germany (20273 + Euro symbol) |
1142 | IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) |
1143 | IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) |
1144 | IBM EBCDIC - Italy (20280 + Euro symbol) |
1145 | IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) |
1146 | IBM EBCDIC - United Kingdom (20285 + Euro symbol) |
1147 | IBM EBCDIC - France (20297 + Euro symbol) |
1148 | IBM EBCDIC - International (500 + Euro symbol) |
1149 | IBM EBCDIC - Icelandic (20871 + Euro symbol) |
1200 | Unicode UCS-2 Little-Endian (BMP of ISO 10646) |
1201 | Unicode UCS-2 Big-Endian |
1250 | ANSI - Central European |
1251 | ANSI - Cyrillic |
1252 | ANSI - Latin I |
1253 | ANSI - Greek |
1254 | ANSI - Turkish |
1255 | ANSI - Hebrew |
1256 | ANSI - Arabic |
1257 | ANSI - Baltic |
1258 | ANSI/OEM - Vietnamese |
1361 | Korean (Johab) |
10000 | MAC - Roman |
10001 | MAC - Japanese |
10002 | MAC - Traditional Chinese (Big5) |
10003 | MAC - Korean |
10004 | MAC - Arabic |
10005 | MAC - Hebrew |
10006 | MAC - Greek I |
10007 | MAC - Cyrillic |
10008 | MAC - Simplified Chinese (GB 2312) |
10010 | MAC - Romania |
10017 | MAC - Ukraine |
10021 | MAC - Thai |
10029 | MAC - Latin II |
10079 | MAC - Icelandic |
10081 | MAC - Turkish |
10082 | MAC - Croatia |
12000 | Unicode UCS-4 Little-Endian |
12001 | Unicode UCS-4 Big-Endian |
20000 | CNS - Taiwan |
20001 | TCA - Taiwan |
20002 | Eten - Taiwan |
20003 | IBM5550 - Taiwan |
20004 | TeleText - Taiwan |
20005 | Wang - Taiwan |
20105 | IA5 IRV International Alphabet No. 5 (7-bit) |
20106 | IA5 German (7-bit) |
20107 | IA5 Swedish (7-bit) |
20108 | IA5 Norwegian (7-bit) |
20127 | US-ASCII (7-bit) |
20261 | T.61 |
20269 | ISO 6937 Non-Spacing Accent |
20273 | IBM EBCDIC - Germany |
20277 | IBM EBCDIC - Denmark/Norway |
20278 | IBM EBCDIC - Finland/Sweden |
20280 | IBM EBCDIC - Italy |
20284 | IBM EBCDIC - Latin America/Spain |
20285 | IBM EBCDIC - United Kingdom |
20290 | IBM EBCDIC - Japanese Katakana Extended |
20297 | IBM EBCDIC - France |
20420 | IBM EBCDIC - Arabic |
20423 | IBM EBCDIC - Greek |
20424 | IBM EBCDIC - Hebrew |
20833 | IBM EBCDIC - Korean Extended |
20838 | IBM EBCDIC - Thai |
20866 | Russian - KOI8-R |
20871 | IBM EBCDIC - Icelandic |
20880 | IBM EBCDIC - Cyrillic (Russian) |
20905 | IBM EBCDIC - Turkish |
20924 | IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) |
20932 | JIS X 0208-1990 & 0121-1990 |
20936 | Simplified Chinese (GB2312) |
21025 | IBM EBCDIC - Cyrillic (Serbian, Bulgarian) |
21027 | Extended Alpha Lowercase |
21866 | Ukrainian (KOI8-U) |
28591 | ISO 8859-1 Latin I |
28592 | ISO 8859-2 Central Europe |
28593 | ISO 8859-3 Latin 3 |
28594 | ISO 8859-4 Baltic |
28595 | ISO 8859-5 Cyrillic |
28596 | ISO 8859-6 Arabic |
28597 | ISO 8859-7 Greek |
28598 | ISO 8859-8 Hebrew |
28599 | ISO 8859-9 Latin 5 |
28605 | ISO 8859-15 Latin 9 |
29001 | Europa 3 |
38598 | ISO 8859-8 Hebrew |
50220 | ISO 2022 Japanese with no halfwidth Katakana |
50221 | ISO 2022 Japanese with halfwidth Katakana |
50222 | ISO 2022 Japanese JIS X 0201-1989 |
50225 | ISO 2022 Korean |
50227 | ISO 2022 Simplified Chinese |
50229 | ISO 2022 Traditional Chinese |
50930 | Japanese (Katakana) Extended |
50931 | US/Canada and Japanese |
50933 | Korean Extended and Korean |
50935 | Simplified Chinese Extended and Simplified Chinese |
50936 | Simplified Chinese |
50937 | US/Canada and Traditional Chinese |
50939 | Japanese (Latin) Extended and Japanese |
51932 | EUC - Japanese |
51936 | EUC - Simplified Chinese |
51949 | EUC - Korean |
51950 | EUC - Traditional Chinese |
52936 | HZ-GB2312 Simplified Chinese |
54936 | Windows XP: GB18030 Simplified Chinese (4 Byte) |
57002 | ISCII Devanagari |
57003 | ISCII Bengali |
57004 | ISCII Tamil |
57005 | ISCII Telugu |
57006 | ISCII Assamese |
57007 | ISCII Oriya |
57008 | ISCII Kannada |
57009 | ISCII Malayalam |
57010 | ISCII Gujarati |
57011 | ISCII Punjabi |
65000 | Unicode UTF-7 |
65001 | Unicode UTF-8 |
Identifier | Name |
1 | ASCII |
2 | NEXTSTEP |
3 | JapaneseEUC |
4 | UTF8 |
5 | ISOLatin1 |
6 | Symbol |
7 | NonLossyASCII |
8 | ShiftJIS |
9 | ISOLatin2 |
10 | Unicode |
11 | WindowsCP1251 |
12 | WindowsCP1252 |
13 | WindowsCP1253 |
14 | WindowsCP1254 |
15 | WindowsCP1250 |
21 | ISO2022JP |
30 | MacOSRoman |
10 | UTF16String |
0x90000100 | UTF16BigEndian |
0x94000100 | UTF16LittleEndian |
0x8c000100 | UTF32String |
0x98000100 | UTF32BigEndian |
0x9c000100 | UTF32LittleEndian |
65536 | Proprietary |
- Product: The product the license is for.
- Product Key: The key the license was generated from.
- License Source: Where the license was found (e.g., RuntimeLicense, License File).
- License Type: The type of license installed (e.g., Royalty Free, Single Server).
- Last Valid Build: The last valid build number for which the license will work.
This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.
FIPS mode can be enabled by setting the UseFIPSCompliantAPI configuration setting to true. This is a static setting that applies to all instances of all classes of the toolkit within the process. It is recommended to enable or disable this setting once before the component has been used to establish a connection. Enabling FIPS while an instance of the component is active and connected may result in unexpected behavior.
For more details, please see the FIPS 140-2 Compliance article.
Note: This setting is applicable only on Windows.
Note: Enabling FIPS compliance requires a special license; please contact sales@nsoftware.com for details.
Setting this configuration setting to true tells the class to use the internal implementation instead of using the system security libraries.
On Windows, this setting is set to false by default. On Linux/macOS, this setting is set to true by default.
To use the system security libraries for Linux, OpenSSL support must be enabled. For more information on how to enable OpenSSL, please refer to the OpenSSL Notes section.
Trappable Errors (Telnet Class)
Telnet Errors
118 | Firewall error. Error message contains detailed description. |
191 | SubOption string too long. Truncated. |
4001 | Telnet protocol error. Invalid server response. |
The class may also return one of the following error codes, which are inherited from other classes.
SSLClient Errors
100 | You cannot change the RemotePort at this time. A connection is in progress. |
101 | You cannot change the RemoteHost (Server) at this time. A connection is in progress. |
102 | The RemoteHost address is invalid (0.0.0.0). |
104 | Already connected. If you want to reconnect, close the current connection first. |
106 | You cannot change the LocalPort at this time. A connection is in progress. |
107 | You cannot change the LocalHost at this time. A connection is in progress. |
112 | You cannot change MaxLineLength at this time. A connection is in progress. |
116 | RemotePort cannot be zero. Please specify a valid service port number. |
117 | You cannot change the UseConnection option while the class is active. |
135 | Operation would block. |
201 | Timeout. |
211 | Action impossible in control's present state. |
212 | Action impossible while not connected. |
213 | Action impossible while listening. |
301 | Timeout. |
302 | Could not open file. |
434 | Unable to convert string to selected CodePage. |
1105 | Already connecting. If you want to reconnect, close the current connection first. |
1117 | You need to connect first. |
1119 | You cannot change the LocalHost at this time. A connection is in progress. |
1120 | Connection dropped by remote host. |
SSL Errors
270 | Cannot load specified security library. |
271 | Cannot open certificate store. |
272 | Cannot find specified certificate. |
273 | Cannot acquire security credentials. |
274 | Cannot find certificate chain. |
275 | Cannot verify certificate chain. |
276 | Error during handshake. |
280 | Error verifying certificate. |
281 | Could not find client certificate. |
282 | Could not find server certificate. |
283 | Error encrypting data. |
284 | Error decrypting data. |
TCP/IP Errors
10004 | [10004] Interrupted system call. |
10009 | [10009] Bad file number. |
10013 | [10013] Access denied. |
10014 | [10014] Bad address. |
10022 | [10022] Invalid argument. |
10024 | [10024] Too many open files. |
10035 | [10035] Operation would block. |
10036 | [10036] Operation now in progress. |
10037 | [10037] Operation already in progress. |
10038 | [10038] Socket operation on nonsocket. |
10039 | [10039] Destination address required. |
10040 | [10040] Message is too long. |
10041 | [10041] Protocol wrong type for socket. |
10042 | [10042] Bad protocol option. |
10043 | [10043] Protocol is not supported. |
10044 | [10044] Socket type is not supported. |
10045 | [10045] Operation is not supported on socket. |
10046 | [10046] Protocol family is not supported. |
10047 | [10047] Address family is not supported by protocol family. |
10048 | [10048] Address already in use. |
10049 | [10049] Cannot assign requested address. |
10050 | [10050] Network is down. |
10051 | [10051] Network is unreachable. |
10052 | [10052] Net dropped connection or reset. |
10053 | [10053] Software caused connection abort. |
10054 | [10054] Connection reset by peer. |
10055 | [10055] No buffer space available. |
10056 | [10056] Socket is already connected. |
10057 | [10057] Socket is not connected. |
10058 | [10058] Cannot send after socket shutdown. |
10059 | [10059] Too many references, cannot splice. |
10060 | [10060] Connection timed out. |
10061 | [10061] Connection refused. |
10062 | [10062] Too many levels of symbolic links. |
10063 | [10063] File name is too long. |
10064 | [10064] Host is down. |
10065 | [10065] No route to host. |
10066 | [10066] Directory is not empty |
10067 | [10067] Too many processes. |
10068 | [10068] Too many users. |
10069 | [10069] Disc Quota Exceeded. |
10070 | [10070] Stale NFS file handle. |
10071 | [10071] Too many levels of remote in path. |
10091 | [10091] Network subsystem is unavailable. |
10092 | [10092] WINSOCK DLL Version out of range. |
10093 | [10093] Winsock is not loaded yet. |
11001 | [11001] Host not found. |
11002 | [11002] Nonauthoritative 'Host not found' (try again or check DNS setup). |
11003 | [11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP. |
11004 | [11004] Valid name, no data record (check DNS setup). |