AMQP Component

Properties   Methods   Events   Config Settings   Errors  

An easy-to-use AMQP 1.0 client implementation.

Syntax

TipqAMQP

Remarks

The AMQP component provides an easy-to-use AMQP 1.0 client implementation. The component supports both plaintext and TLS-enabled connections over TCP.

Connecting

The component implements all three layers of the AMQP 1.0 transport protocol, so the first step is to initiate the overall connection. Set the ContainerId property and call the ConnectTo method, passing it the server's hostname and port number.

Once connected, the next step is to create at least one session, which can be accomplished by using the CreateSession method. The component allows creating any number of sessions, up to the limit specified by the MaxSessionCount configuration setting.

Connecting and Creating a Session amqp1.ContainerId = "testClient"; amqp1.ConnectTo("amqp.test-server.com", 5672); amqp1.CreateSession("TestSession");

After creating a session, the next step is to create one or more links (which are created in the context of a session) so that messages can be sent and/or received. Links are unidirectional, so each one has a sender on one end and a receiver on the other.

The component can function both as a sender node (by opening sender links) and as a receiver node (by opening receiver links). But keep in mind that, since the component is implemented as an AMQP 1.0 client, it must be the one to open links (said another way, the component cannot accept any link requests made by other peers).

As with sessions, the component allows creating any number of links for each session, up to the limit specified by the MaxLinkCountPerSession configuration setting.

Creating Sender Links

The LinkReadyToSend event will fire when the newly created sender link is ready to send messages.

Creating a Sender Link amqp1.OnLinkReadyToSend += (s, e) => { Console.WriteLine("Link '" + e.LinkName + "' is ready to send messages!"); }; amqp1.CreateSenderLink("TestSession", "TestSenderLink", "TestTarget");

Sending Messages

At minimum, the MessageValue and MessageValueType properties must be set. All other properties are optional, though specifying a unique value for MessageId is recommended. (If the GenerateMessageId configuration setting is enabled, the component will generate one automatically when the message is sent.)

Once the Message* properties have be assigned as desired, call the SendMessage method, passing it the name of an existing sender link on which the message should be sent.

The MessageOut event will be fired when the message has been sent (and acknowledged, if MessageSettled was set to false). The MessageOutcome event may also fire, if necessary, once the receiver reports the outcome of the message.

Refer to SendMessage, MessageOut, and MessageOutcome for more information.

Sending a Message amqp1.OnMessageOut += (s, e) => { Console.WriteLine("Message with Id '" + e.MessageId + "' has been sent on link '" + e.LinkName + "'."); }; amqp1.Message.MessageId = "TestMessageId"; amqp1.Message.Value = "Hello, world!"; amqp1.Message.ValueType = AMQPValueTypes.mvtString; amqp1.SendMessage("TestSenderLink");

The ResetMessage method can be used to reset the Message* properties to their default values.

Sending Composite AMQP Data

The component supports sending composite AMQP data in a message through the use of JSON with a well-defined schema. Refer to the SendMessage method's documentation for more information and examples.

Creating Receiver Links

The ReceiveMode property controls which receive mode newly-created receiver links will use; refer to its documentation for more information.

After ensuring that ReceiveMode is set as desired, call CreateReceiverLink, passing it the name of an existing session, a unique name for the link, and (if necessary in your environment) the name of a source for the sender to route the link creation request to.

Creating a Receiver Link // Creating an automatic receiver link. amqp1.ReceiveMode = AmqpReceiveModes.rmAutomatic; amqp1.CreateReceiverLink("TestSession", "TestAutoReceiverLink", "TestSource1"); // Creating a fetch-based receiver link. amqp1.ReceiveMode = AmqpReceiveModes.rmFetch; amqp1.CreateReceiverLink("TestSession", "TestFetchReceiverLink", "TestSource2");

Receiving Messages

For receiver links created in fetch-based mode, the component will attempt to "fetch" a message each time the FetchMessage method is called (optionally timing out after a time, if FetchTimeout is non-zero). When calling FetchMessage, pass it the name of a fetch-based receiver link.

Regardless of whether a messages is received automatically or fetched, any incoming message will cause the component to fire the MessageIn event and update the ReceivedMessage* properties.

When the MessageIn event fires, its State event parameter can be used to specify the outcome of the message, which the component will then transmit back to the sender (as well as self-report by firing the MessageOutcome event). Refer to MessageIn for more information.

Receiving a Message // For automatic receiver links, only the event handler is necessary. amqp1.OnMessageIn += (s, e) => { Console.WriteLine("Message with Id '" + e.MessageId + "' has been received on link '" + e.LinkName + "'. Value:"); Console.WriteLine(amqp1.ReceivedMessage.Value); // The message state is already set to the "Accepted" outcome by default, but we'll set it again // for the purpose of this example. e.State = 0; // 0 = Accepted. }; // For fetch-based links, it's also necessary to call FetchMessage(). It is recommended that the // FetchTimeout property be set to a non-zero value (60 seconds is the default) so that the fetch // request will eventually time out if the sender doesn't have any messages available to deliver. amqp1.FetchTimeout = 60; amqp1.FetchMessage("TestFetchReceiverLink");

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AuthScheme Property (AMQP Component)

The authentication scheme to use when connecting.

Syntax

__property TipqAMQPAuthSchemes AuthScheme = { read=FAuthScheme, write=FSetAuthScheme };

enum TipqAMQPAuthSchemes {
  smNone=0,
  smSASLAnonymous=1,
  smSASLPlain=2,
  smSASLExternal=3
};

Default Value

smSASLPlain

Remarks

This property controls what authentication scheme the component should use when connecting to the remote host.

Valid values are:

• smNone (0)
• smSASLAnonymous (1)
• smSASLPlain (2) - Default
• smSASLExternal (3)

This property is not available at design time.

Data Type

Integer

Connected Property (AMQP Component)

This property triggers a connection or disconnection.

Syntax

__property bool Connected = { read=FConnected, write=FSetConnected };

Default Value

False

Remarks

This property triggers a connection or disconnection. Setting this property to True makes the component attempt to connect to the host identified by the RemoteHost property. If successful, after the connection is achieved, the value of the property changes to True and the Connected event is fired.

Setting this property to False closes the connection. How and when the connection is closed is controlled by the Linger property.

Note: It is recommended to use the Connect or Disconnect method instead of setting this property.

This property is not available at design time.

Data Type

Boolean

ContainerId Property (AMQP Component)

The container Id the component should advertise when connecting.

Syntax

__property String ContainerId = { read=FContainerId, write=FSetContainerId };

Default Value

""

Remarks

This property specifies the container Id that the component should advertise when it's connecting to the remote host.

In AMQP, the top-level organizational grouping is called a "container", and each container can contain zero or more "nodes", which are the actual entities which send and receive messages over links.

Since this component handles multiple layers of the AMQP transport protocol (the overall connection, the sessions in that connection, and the links attached to those sessions), it must be given a unique container Id.

Note: The container Id cannot be changed while connected.

This property is not available at design time.

Data Type

String

FetchTimeout Property (AMQP Component)

How long the component should wait for a message to be received after FetchMessage is called.

Syntax

__property int FetchTimeout = { read=FFetchTimeout, write=FSetFetchTimeout };

Default Value

60

Remarks

This property controls how long, in seconds, the component will wait for a message to be received after FetchMessage is called before timing out the request. If set to zero, the component will wait indefinitely.

Refer to FetchMessage for more information.

This property is not available at design time.

Data Type

Integer

FirewallAutoDetect Property (AMQP Component)

This property tells the component whether or not to automatically detect and use firewall system settings, if available.

Syntax

__property bool FirewallAutoDetect = { read=FFirewallAutoDetect, write=FSetFirewallAutoDetect };

Default Value

False

Remarks

This property tells the component whether or not to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (AMQP Component)

This property determines the type of firewall to connect through.

Syntax

__property TipqAMQPFirewallTypes FirewallType = { read=FFirewallType, write=FSetFirewallType };

enum TipqAMQPFirewallTypes {
  fwNone=0,
  fwTunnel=1,
  fwSOCKS4=2,
  fwSOCKS5=3,
  fwSOCKS4A=10
};

Default Value

fwNone

Remarks

This property determines the type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (AMQP Component)

This property contains the name or IP address of firewall (optional).

Syntax

__property String FirewallHost = { read=FFirewallHost, write=FSetFirewallHost };

Default Value

""

Remarks

This property contains the name or IP address of firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the component raises an exception.

Data Type

String

FirewallPassword Property (AMQP Component)

This property contains a password if authentication is to be used when connecting through the firewall.

Syntax

__property String FirewallPassword = { read=FFirewallPassword, write=FSetFirewallPassword };

Default Value

""

Remarks

This property contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Data Type

String

FirewallPort Property (AMQP Component)

This property contains the transmission control protocol (TCP) port for the firewall Host .

Syntax

__property int FirewallPort = { read=FFirewallPort, write=FSetFirewallPort };

Default Value

0

Remarks

This property contains the transmission control protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (AMQP Component)

This property contains a user name if authentication is to be used connecting through a firewall.

Syntax

__property String FirewallUser = { read=FFirewallUser, write=FSetFirewallUser };

Default Value

""

Remarks

This property contains a user name if authentication is to be used connecting through a firewall. If the FirewallHost is specified, this property and FirewallPassword properties are used to connect and authenticate to the given Firewall. If the authentication fails, the component raises an exception.

Data Type

String

IdleTimeout Property (AMQP Component)

The maximum period of inactivity the component will allow before disconnecting.

Syntax

__property int IdleTimeout = { read=FIdleTimeout, write=FSetIdleTimeout };

Default Value

0

Remarks

This property controls how long, in seconds, the component will allow the connection to sit idle before it disconnects from the remote host.

This property may be set to 0 to prevent the component from ever closing the connection due to inactivity.

Note: The idle timeout cannot be changed while connected.

This property is not available at design time.

Data Type

Integer

IncomingMessageCount Property (AMQP Component)

The number of records in the IncomingMessage arrays.

Syntax

__property int IncomingMessageCount = { read=FIncomingMessageCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• IncomingMessageAbsoluteExpiryTime
• IncomingMessageContentEncoding
• IncomingMessageContentType
• IncomingMessageCorrelationId
• IncomingMessageCreationTime
• IncomingMessageDeliveryCount
• IncomingMessageDurable
• IncomingMessageFirstAcquirer
• IncomingMessageGroupId
• IncomingMessageGroupSequence
• IncomingMessageId
• IncomingMessageLinkName
• IncomingMessagePriority
• IncomingMessageReplyTo
• IncomingMessageReplyToGroupId
• IncomingMessageSettled
• IncomingMessageSubject
• IncomingMessageTo
• IncomingMessageTTL
• IncomingMessageUserId
• IncomingMessageValue
• IncomingMessageValueType

The array indices start at 0 and end at IncomingMessageCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

IncomingMessageAbsoluteExpiryTime Property (AMQP Component)

The absolute time at which this message should be considered expired.

Syntax

__property __int64 IncomingMessageAbsoluteExpiryTime[int IncomingMessageIndex] = { read=FIncomingMessageAbsoluteExpiryTime };

Default Value

0

Remarks

The absolute time at which this message should be considered expired.

This property specifies the absolute time at which this message should be considered expired. It may be -1 if this message does not have an absolute expiry time.

This property's value should be specified in milliseconds relative to the Unix epoch (January 1, 1970 00:00:00 UTC).

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Long64

IncomingMessageContentEncoding Property (AMQP Component)

The content encoding of this message's data.

Syntax

__property String IncomingMessageContentEncoding[int IncomingMessageIndex] = { read=FIncomingMessageContentEncoding };

Default Value

""

Remarks

The content encoding of this message's data.

This property specifies the content encoding of this message's data. It may be empty if this message does not have a content encoding set.

When constructing a message for sending, this property is ignored if IncomingMessageValueType is not set to mvtBinary (16).

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageContentType Property (AMQP Component)

The content type of this message's data.

Syntax

__property String IncomingMessageContentType[int IncomingMessageIndex] = { read=FIncomingMessageContentType };

Default Value

""

Remarks

The content type of this message's data.

This property specifies the content type of this message's data. It may be empty if this message does not have a content type set.

When constructing a message for sending, this property is ignored if IncomingMessageValueType is not set to mvtBinary (16).

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageCorrelationId Property (AMQP Component)

The correlation Id of this message.

Syntax

__property String IncomingMessageCorrelationId[int IncomingMessageIndex] = { read=FIncomingMessageCorrelationId };

Default Value

""

Remarks

The correlation Id of this message.

This property specifies the correlation Id of this message. It may be empty if this message does not have a correlation Id.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageCreationTime Property (AMQP Component)

The creation time of this message.

Syntax

__property __int64 IncomingMessageCreationTime[int IncomingMessageIndex] = { read=FIncomingMessageCreationTime };

Default Value

0

Remarks

The creation time of this message.

This property specifies the absolute creation time of this message. It may be -1 if this message does not have a creation time set.

This property's value should be specified in milliseconds relative to the Unix epoch (January 1, 1970 00:00:00 UTC).

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Long64

IncomingMessageDeliveryCount Property (AMQP Component)

How many previous attempts there have been to deliver this message.

Syntax

__property __int64 IncomingMessageDeliveryCount[int IncomingMessageIndex] = { read=FIncomingMessageDeliveryCount };

Default Value

0

Remarks

How many previous attempts there have been to deliver this message.

This property indicates how many (unsuccessful) previous attempts there have been to deliver this message.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Long64

IncomingMessageDurable Property (AMQP Component)

Whether this message is durable.

Syntax

__property bool IncomingMessageDurable[int IncomingMessageIndex] = { read=FIncomingMessageDurable };

Default Value

False

Remarks

Whether this message is durable.

This property specifies whether this message is durable or not.

If a message is marked as durable, any intermediate nodes which cannot guarantee that the message won't be lost under any circumstances will not accept the message.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Boolean

IncomingMessageFirstAcquirer Property (AMQP Component)

Whether this message may have been acquired by other links previously.

Syntax

__property bool IncomingMessageFirstAcquirer[int IncomingMessageIndex] = { read=FIncomingMessageFirstAcquirer };

Default Value

False

Remarks

Whether this message may have been acquired by other links previously.

This property specifies whether this message might have previously been acquired by other links.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Boolean

IncomingMessageGroupId Property (AMQP Component)

The Id of the group this message belongs to.

Syntax

__property String IncomingMessageGroupId[int IncomingMessageIndex] = { read=FIncomingMessageGroupId };

Default Value

""

Remarks

The Id of the group this message belongs to.

This property specifies the Id of the group that this message belongs to. It may be empty if this message does not belong to a group.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageGroupSequence Property (AMQP Component)

The position of this message within its group.

Syntax

__property __int64 IncomingMessageGroupSequence[int IncomingMessageIndex] = { read=FIncomingMessageGroupSequence };

Default Value

0

Remarks

The position of this message within its group.

This property specifies the relative position of this message within its group. It may be -1 if this message does not belong to a group.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Long64

IncomingMessageLinkName Property (AMQP Component)

The name of the link this message is associated with.

Syntax

__property String IncomingMessageLinkName[int IncomingMessageIndex] = { read=FIncomingMessageLinkName };

Default Value

""

Remarks

The name of the link this message is associated with.

This property holds the name of the link which this message is being sent/was received on.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageId Property (AMQP Component)

The unique Id of this message.

Syntax

__property String IncomingMessageId[int IncomingMessageIndex] = { read=FIncomingMessageId };

Default Value

""

Remarks

The unique Id of this message.

This property holds the unique Id of this message. It may be empty if this message does not have a unique Id.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessagePriority Property (AMQP Component)

The priority of this message.

Syntax

__property int IncomingMessagePriority[int IncomingMessageIndex] = { read=FIncomingMessagePriority };

Default Value

4

Remarks

The priority of this message.

This property holds the priority of this message; the default is 4 (as defined by the AMQP specification).

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Integer

IncomingMessageReplyTo Property (AMQP Component)

The address of the node to send replies to for this message.

Syntax

__property String IncomingMessageReplyTo[int IncomingMessageIndex] = { read=FIncomingMessageReplyTo };

Default Value

""

Remarks

The address of the node to send replies to for this message.

This property specifies the address of the node to send replies to for this message. It may be empty if this message does not have a specific reply-to node address.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageReplyToGroupId Property (AMQP Component)

The Id of the group to send replies to for this message.

Syntax

__property String IncomingMessageReplyToGroupId[int IncomingMessageIndex] = { read=FIncomingMessageReplyToGroupId };

Default Value

""

Remarks

The Id of the group to send replies to for this message.

This property specifies the Id of the group to send replies to for this message. It may be empty if there is not a specific reply-to group for this message.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageSettled Property (AMQP Component)

Whether this message is settled.

Syntax

__property bool IncomingMessageSettled[int IncomingMessageIndex] = { read=FIncomingMessageSettled };

Default Value

true

Remarks

Whether this message is settled.

This property specifies whether this message is settled or not.

Note that, when constructing a message for sending, this property is ignored if the send settle mode of the link it is sent on is not Mixed (2).

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Boolean

IncomingMessageSubject Property (AMQP Component)

The subject of this message.

Syntax

__property String IncomingMessageSubject[int IncomingMessageIndex] = { read=FIncomingMessageSubject };

Default Value

""

Remarks

The subject of this message.

This property specifies the subject of this message. It may be empty if this message does not have a subject set.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageTo Property (AMQP Component)

The address of the node which this message is intended for.

Syntax

__property String IncomingMessageTo[int IncomingMessageIndex] = { read=FIncomingMessageTo };

Default Value

""

Remarks

The address of the node which this message is intended for.

This property specifies the address of the node which this message is intended to be delivered to. It my be empty if this message is not intended for a specific destination node.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageTTL Property (AMQP Component)

The time-to-live value for this message.

Syntax

__property __int64 IncomingMessageTTL[int IncomingMessageIndex] = { read=FIncomingMessageTTL };

Default Value

-1

Remarks

The time-to-live value for this message.

This property specifies the time-to-live (TTL) value, in milliseconds, for this message. It may be -1 if this message does not have a TTL.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Long64

IncomingMessageUserId Property (AMQP Component)

The identity of the user responsible for producing this message.

Syntax

__property String IncomingMessageUserId[int IncomingMessageIndex] = { read=FIncomingMessageUserId };

Default Value

""

Remarks

The identity of the user responsible for producing this message.

This property specifies the identity of the user responsible for producing this message. It may be empty if no specific user was responsible for creating this message.

A message's user Id may be used for verification or authentication by intermediates and/or the final receiver.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageValue Property (AMQP Component)

This message's value.

Syntax

__property String IncomingMessageValue[int IncomingMessageIndex] = { read=FIncomingMessageValue };

Default Value

""

Remarks

This message's value.

This property specifies the value to send in this message. The IncomingMessageValueType property should be used to specify the data type of the value.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageValueType Property (AMQP Component)

This message's value data type.

Syntax

__property TipqAMQPIncomingMessageValueTypes IncomingMessageValueType[int IncomingMessageIndex] = { read=FIncomingMessageValueType };

enum TipqAMQPIncomingMessageValueTypes {
  mvtNull=0,
  mvtBoolean=1,
  mvtUbyte=2,
  mvtUshort=3,
  mvtUint=4,
  mvtUlong=5,
  mvtByte=6,
  mvtShort=7,
  mvtInt=8,
  mvtLong=9,
  mvtFloat=10,
  mvtDouble=11,
  mvtDecimal=12,
  mvtChar=13,
  mvtTimestamp=14,
  mvtUuid=15,
  mvtBinary=16,
  mvtString=17,
  mvtSymbol=18,
  mvtJson=19
};

Default Value

mvtNull

Remarks

This message's value data type.

This property specifies the data type of this message's IncomingMessageValue.

The table below shows the possible value types, their descriptions, and how to format the data assigned to IncomingMessageValue. All numeric value types should use their standard string formatting (except for the mvtDecimal (12) type, which should be specified as hex-encoded bytes).

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Integer

LinkCount Property (AMQP Component)

The number of records in the Link arrays.

Syntax

__property int LinkCount = { read=FLinkCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• LinkAvailable
• LinkChannelName
• LinkCredit
• LinkDeliveryCount
• LinkName
• LinkReadyToSend
• LinkReceiveMode
• LinkRole

The array indices start at 0 and end at LinkCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

LinkAvailable Property (AMQP Component)

The number of messages which this link's sender could send if it had credit for them.

Syntax

__property __int64 LinkAvailable[int LinkIndex] = { read=FLinkAvailable };

Default Value

0

Remarks

The number of messages which this link's sender could send if it had credit for them.

This property returns the number of messages which this link's sender has indicated that it could send if it had the credit to do so.

The LinkIndex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkCount property.

This property is read-only and not available at design time.

Data Type

Long64

LinkChannelName Property (AMQP Component)

The channel name this link is using.

Syntax

__property String LinkChannelName[int LinkIndex] = { read=FLinkChannelName };

Default Value

""

Remarks

The channel name this link is using.

This property holds the channel name this link is using.

The LinkIndex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkCount property.

This property is read-only and not available at design time.

Data Type

String

LinkCredit Property (AMQP Component)

The amount of credit currently available to this link's sender.

Syntax

__property __int64 LinkCredit[int LinkIndex] = { read=FLinkCredit };

Default Value

0

Remarks

The amount of credit currently available to this link's sender.

This property holds the amount of credit currently available to this link's sender. The sender on a link can only send messages if it has non-zero credit.

The LinkIndex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkCount property.

This property is read-only and not available at design time.

Data Type

Long64

LinkDeliveryCount Property (AMQP Component)

The current delivery count value for this link.

Syntax

__property __int64 LinkDeliveryCount[int LinkIndex] = { read=FLinkDeliveryCount };

Default Value

0

Remarks

The current delivery count value for this link.

This property holds the current delivery count value for this link.

The LinkIndex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkCount property.

This property is read-only and not available at design time.

Data Type

Long64

LinkName Property (AMQP Component)

This link's name.

Syntax

__property String LinkName[int LinkIndex] = { read=FLinkName };

Default Value

""

Remarks

This link's name.

This property holds this link's name.

The LinkIndex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkCount property.

This property is read-only and not available at design time.

Data Type

String

LinkReadyToSend Property (AMQP Component)

Whether this link is ready to send a message.

Syntax

__property bool LinkReadyToSend[int LinkIndex] = { read=FLinkReadyToSend };

Default Value

False

Remarks

Whether this link is ready to send a message.

This property reflects whether this link is currently ready to send a message or not; it always returns False if LinkRole is lrReceiver (1).

The LinkIndex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkCount property.

This property is read-only and not available at design time.

Data Type

Boolean

LinkReceiveMode Property (AMQP Component)

The receive mode this link is operating in.

Syntax

__property TipqAMQPLinkReceiveModes LinkReceiveMode[int LinkIndex] = { read=FLinkReceiveMode };

enum TipqAMQPLinkReceiveModes {
  lrmAutomatic=0,
  lrmFetch=1
};

Default Value

lrmAutomatic

Remarks

The receive mode this link is operating in.

This property reflects the receive mode which this link is operating in, if it is a receiver link. (For sender links, this property's value means nothing.) Values can be:

• lrmAutomatic - Messages will be received automatically
• lrmFetch - One message will be received after each call to the FetchMessage method.

Refer to ReceiveMode for more information.

The LinkIndex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkCount property.

This property is read-only and not available at design time.

Data Type

Integer

LinkRole Property (AMQP Component)

The component's role on this link.

Syntax

__property TipqAMQPLinkRoles LinkRole[int LinkIndex] = { read=FLinkRole };

enum TipqAMQPLinkRoles {
  lrSender=0,
  lrReceiver=1
};

Default Value

lrSender

Remarks

The component's role on this link.

This property reflects which role the component is in for this link. Valid values are:

• lrSender (0)
• lrReceiver (1)

The LinkIndex parameter specifies the index of the item in the array. The size of the array is controlled by the LinkCount property.

This property is read-only and not available at design time.

Data Type

Integer

LocalHost Property (AMQP Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

__property String LocalHost = { read=FLocalHost, write=FSetLocalHost };

Default Value

""

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

LocalPort Property (AMQP Component)

The TCP port in the local host where the component binds.

Syntax

__property int LocalPort = { read=FLocalPort, write=FSetLocalPort };

Default Value

0

Remarks

This property must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting this property to 0 (default) enables the system to choose an open port at random. The chosen port will be returned by the LocalPort property after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this property when a connection is active will generate an error.

This property is useful when trying to connect to services that require a trusted port in the client side.

Data Type

Integer

MessageAbsoluteExpiryTime Property (AMQP Component)

The absolute time at which this message should be considered expired.

Syntax

__property __int64 MessageAbsoluteExpiryTime = { read=FMessageAbsoluteExpiryTime, write=FSetMessageAbsoluteExpiryTime };

Default Value

0

Remarks

The absolute time at which this message should be considered expired.

This property specifies the absolute time at which this message should be considered expired. It may be -1 if this message does not have an absolute expiry time.

This property's value should be specified in milliseconds relative to the Unix epoch (January 1, 1970 00:00:00 UTC).

This property is not available at design time.

Data Type

Long64

MessageContentEncoding Property (AMQP Component)

The content encoding of this message's data.

Syntax

__property String MessageContentEncoding = { read=FMessageContentEncoding, write=FSetMessageContentEncoding };

Default Value

""

Remarks

The content encoding of this message's data.

This property specifies the content encoding of this message's data. It may be empty if this message does not have a content encoding set.

When constructing a message for sending, this property is ignored if MessageValueType is not set to mvtBinary (16).

This property is not available at design time.

Data Type

String

MessageContentType Property (AMQP Component)

The content type of this message's data.

Syntax

__property String MessageContentType = { read=FMessageContentType, write=FSetMessageContentType };

Default Value

""

Remarks

The content type of this message's data.

This property specifies the content type of this message's data. It may be empty if this message does not have a content type set.

When constructing a message for sending, this property is ignored if MessageValueType is not set to mvtBinary (16).

This property is not available at design time.

Data Type

String

MessageCorrelationId Property (AMQP Component)

The correlation Id of this message.

Syntax

__property String MessageCorrelationId = { read=FMessageCorrelationId, write=FSetMessageCorrelationId };

Default Value

""

Remarks

The correlation Id of this message.

This property specifies the correlation Id of this message. It may be empty if this message does not have a correlation Id.

This property is not available at design time.

Data Type

String

MessageCreationTime Property (AMQP Component)

The creation time of this message.

Syntax

__property __int64 MessageCreationTime = { read=FMessageCreationTime, write=FSetMessageCreationTime };

Default Value

0

Remarks

The creation time of this message.

This property specifies the absolute creation time of this message. It may be -1 if this message does not have a creation time set.

This property's value should be specified in milliseconds relative to the Unix epoch (January 1, 1970 00:00:00 UTC).

This property is not available at design time.

Data Type

Long64

MessageDeliveryCount Property (AMQP Component)

How many previous attempts there have been to deliver this message.

Syntax

__property __int64 MessageDeliveryCount = { read=FMessageDeliveryCount, write=FSetMessageDeliveryCount };

Default Value

0

Remarks

How many previous attempts there have been to deliver this message.

This property indicates how many (unsuccessful) previous attempts there have been to deliver this message.

This property is not available at design time.

Data Type

Long64

MessageDurable Property (AMQP Component)

Whether this message is durable.

Syntax

__property bool MessageDurable = { read=FMessageDurable, write=FSetMessageDurable };

Default Value

False

Remarks

Whether this message is durable.

This property specifies whether this message is durable or not.

If a message is marked as durable, any intermediate nodes which cannot guarantee that the message won't be lost under any circumstances will not accept the message.

This property is not available at design time.

Data Type

Boolean

MessageFirstAcquirer Property (AMQP Component)

Whether this message may have been acquired by other links previously.

Syntax

__property bool MessageFirstAcquirer = { read=FMessageFirstAcquirer, write=FSetMessageFirstAcquirer };

Default Value

False

Remarks

Whether this message may have been acquired by other links previously.

This property specifies whether this message might have previously been acquired by other links.

This property is not available at design time.

Data Type

Boolean

MessageGroupId Property (AMQP Component)

The Id of the group this message belongs to.

Syntax

__property String MessageGroupId = { read=FMessageGroupId, write=FSetMessageGroupId };

Default Value

""

Remarks

The Id of the group this message belongs to.

This property specifies the Id of the group that this message belongs to. It may be empty if this message does not belong to a group.

This property is not available at design time.

Data Type

String

MessageGroupSequence Property (AMQP Component)

The position of this message within its group.

Syntax

__property __int64 MessageGroupSequence = { read=FMessageGroupSequence, write=FSetMessageGroupSequence };

Default Value

0

Remarks

The position of this message within its group.

This property specifies the relative position of this message within its group. It may be -1 if this message does not belong to a group.

This property is not available at design time.

Data Type

Long64

MessageLinkName Property (AMQP Component)

The name of the link this message is associated with.

Syntax

__property String MessageLinkName = { read=FMessageLinkName };

Default Value

""

Remarks

The name of the link this message is associated with.

This property holds the name of the link which this message is being sent/was received on.

This property is read-only and not available at design time.

Data Type

String

MessageId Property (AMQP Component)

The unique Id of this message.

Syntax

__property String MessageId = { read=FMessageId, write=FSetMessageId };

Default Value

""

Remarks

The unique Id of this message.

This property holds the unique Id of this message. It may be empty if this message does not have a unique Id.

This property is not available at design time.

Data Type

String

MessagePriority Property (AMQP Component)

The priority of this message.

Syntax

__property int MessagePriority = { read=FMessagePriority, write=FSetMessagePriority };

Default Value

4

Remarks

The priority of this message.

This property holds the priority of this message; the default is 4 (as defined by the AMQP specification).

This property is not available at design time.

Data Type

Integer

MessageReplyTo Property (AMQP Component)

The address of the node to send replies to for this message.

Syntax

__property String MessageReplyTo = { read=FMessageReplyTo, write=FSetMessageReplyTo };

Default Value

""

Remarks

The address of the node to send replies to for this message.

This property specifies the address of the node to send replies to for this message. It may be empty if this message does not have a specific reply-to node address.

This property is not available at design time.

Data Type

String

MessageReplyToGroupId Property (AMQP Component)

The Id of the group to send replies to for this message.

Syntax

__property String MessageReplyToGroupId = { read=FMessageReplyToGroupId, write=FSetMessageReplyToGroupId };

Default Value

""

Remarks

The Id of the group to send replies to for this message.

This property specifies the Id of the group to send replies to for this message. It may be empty if there is not a specific reply-to group for this message.

This property is not available at design time.

Data Type

String

MessageSettled Property (AMQP Component)

Whether this message is settled.

Syntax

__property bool MessageSettled = { read=FMessageSettled, write=FSetMessageSettled };

Default Value

true

Remarks

Whether this message is settled.

This property specifies whether this message is settled or not.

Note that, when constructing a message for sending, this property is ignored if the send settle mode of the link it is sent on is not Mixed (2).

This property is not available at design time.

Data Type

Boolean

MessageSubject Property (AMQP Component)

The subject of this message.

Syntax

__property String MessageSubject = { read=FMessageSubject, write=FSetMessageSubject };

Default Value

""

Remarks

The subject of this message.

This property specifies the subject of this message. It may be empty if this message does not have a subject set.

This property is not available at design time.

Data Type

String

MessageTo Property (AMQP Component)

The address of the node which this message is intended for.

Syntax

__property String MessageTo = { read=FMessageTo, write=FSetMessageTo };

Default Value

""

Remarks

The address of the node which this message is intended for.

This property specifies the address of the node which this message is intended to be delivered to. It my be empty if this message is not intended for a specific destination node.

This property is not available at design time.

Data Type

String

MessageTTL Property (AMQP Component)

The time-to-live value for this message.

Syntax

__property __int64 MessageTTL = { read=FMessageTTL, write=FSetMessageTTL };

Default Value

-1

Remarks

The time-to-live value for this message.

This property specifies the time-to-live (TTL) value, in milliseconds, for this message. It may be -1 if this message does not have a TTL.

This property is not available at design time.

Data Type

Long64

MessageUserId Property (AMQP Component)

The identity of the user responsible for producing this message.

Syntax

__property String MessageUserId = { read=FMessageUserId, write=FSetMessageUserId };

Default Value

""

Remarks

The identity of the user responsible for producing this message.

This property specifies the identity of the user responsible for producing this message. It may be empty if no specific user was responsible for creating this message.

A message's user Id may be used for verification or authentication by intermediates and/or the final receiver.

This property is not available at design time.

Data Type

String

MessageValue Property (AMQP Component)

This message's value.

Syntax

__property String MessageValue = { read=FMessageValue, write=FSetMessageValue };

Default Value

""

Remarks

This message's value.

This property specifies the value to send in this message. The MessageValueType property should be used to specify the data type of the value.

This property is not available at design time.

Data Type

String

MessageValueType Property (AMQP Component)

This message's value data type.

Syntax

__property TipqAMQPMessageValueTypes MessageValueType = { read=FMessageValueType, write=FSetMessageValueType };

enum TipqAMQPMessageValueTypes {
  mvtNull=0,
  mvtBoolean=1,
  mvtUbyte=2,
  mvtUshort=3,
  mvtUint=4,
  mvtUlong=5,
  mvtByte=6,
  mvtShort=7,
  mvtInt=8,
  mvtLong=9,
  mvtFloat=10,
  mvtDouble=11,
  mvtDecimal=12,
  mvtChar=13,
  mvtTimestamp=14,
  mvtUuid=15,
  mvtBinary=16,
  mvtString=17,
  mvtSymbol=18,
  mvtJson=19
};

Default Value

mvtNull

Remarks

This message's value data type.

This property specifies the data type of this message's MessageValue.

The table below shows the possible value types, their descriptions, and how to format the data assigned to MessageValue. All numeric value types should use their standard string formatting (except for the mvtDecimal (12) type, which should be specified as hex-encoded bytes).

This property is not available at design time.

Data Type

Integer

OutgoingMessageCount Property (AMQP Component)

The number of records in the OutgoingMessage arrays.

Syntax

__property int OutgoingMessageCount = { read=FOutgoingMessageCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• OutgoingMessageAbsoluteExpiryTime
• OutgoingMessageContentEncoding
• OutgoingMessageContentType
• OutgoingMessageCorrelationId
• OutgoingMessageCreationTime
• OutgoingMessageDeliveryCount
• OutgoingMessageDurable
• OutgoingMessageFirstAcquirer
• OutgoingMessageGroupId
• OutgoingMessageGroupSequence
• OutgoingMessageId
• OutgoingMessageLinkName
• OutgoingMessagePriority
• OutgoingMessageReplyTo
• OutgoingMessageReplyToGroupId
• OutgoingMessageSettled
• OutgoingMessageSubject
• OutgoingMessageTo
• OutgoingMessageTTL
• OutgoingMessageUserId
• OutgoingMessageValue
• OutgoingMessageValueType

The array indices start at 0 and end at OutgoingMessageCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

OutgoingMessageAbsoluteExpiryTime Property (AMQP Component)

The absolute time at which this message should be considered expired.

Syntax

__property __int64 OutgoingMessageAbsoluteExpiryTime[int OutgoingMessageIndex] = { read=FOutgoingMessageAbsoluteExpiryTime };

Default Value

0

Remarks

The absolute time at which this message should be considered expired.

This property specifies the absolute time at which this message should be considered expired. It may be -1 if this message does not have an absolute expiry time.

This property's value should be specified in milliseconds relative to the Unix epoch (January 1, 1970 00:00:00 UTC).

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Long64

OutgoingMessageContentEncoding Property (AMQP Component)

The content encoding of this message's data.

Syntax

__property String OutgoingMessageContentEncoding[int OutgoingMessageIndex] = { read=FOutgoingMessageContentEncoding };

Default Value

""

Remarks

The content encoding of this message's data.

This property specifies the content encoding of this message's data. It may be empty if this message does not have a content encoding set.

When constructing a message for sending, this property is ignored if OutgoingMessageValueType is not set to mvtBinary (16).

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageContentType Property (AMQP Component)

The content type of this message's data.

Syntax

__property String OutgoingMessageContentType[int OutgoingMessageIndex] = { read=FOutgoingMessageContentType };

Default Value

""

Remarks

The content type of this message's data.

This property specifies the content type of this message's data. It may be empty if this message does not have a content type set.

When constructing a message for sending, this property is ignored if OutgoingMessageValueType is not set to mvtBinary (16).

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageCorrelationId Property (AMQP Component)

The correlation Id of this message.

Syntax

__property String OutgoingMessageCorrelationId[int OutgoingMessageIndex] = { read=FOutgoingMessageCorrelationId };

Default Value

""

Remarks

The correlation Id of this message.

This property specifies the correlation Id of this message. It may be empty if this message does not have a correlation Id.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageCreationTime Property (AMQP Component)

The creation time of this message.

Syntax

__property __int64 OutgoingMessageCreationTime[int OutgoingMessageIndex] = { read=FOutgoingMessageCreationTime };

Default Value

0

Remarks

The creation time of this message.

This property specifies the absolute creation time of this message. It may be -1 if this message does not have a creation time set.

This property's value should be specified in milliseconds relative to the Unix epoch (January 1, 1970 00:00:00 UTC).

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Long64

OutgoingMessageDeliveryCount Property (AMQP Component)

How many previous attempts there have been to deliver this message.

Syntax

__property __int64 OutgoingMessageDeliveryCount[int OutgoingMessageIndex] = { read=FOutgoingMessageDeliveryCount };

Default Value

0

Remarks

How many previous attempts there have been to deliver this message.

This property indicates how many (unsuccessful) previous attempts there have been to deliver this message.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Long64

OutgoingMessageDurable Property (AMQP Component)

Whether this message is durable.

Syntax

__property bool OutgoingMessageDurable[int OutgoingMessageIndex] = { read=FOutgoingMessageDurable };

Default Value

False

Remarks

Whether this message is durable.

This property specifies whether this message is durable or not.

If a message is marked as durable, any intermediate nodes which cannot guarantee that the message won't be lost under any circumstances will not accept the message.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Boolean

OutgoingMessageFirstAcquirer Property (AMQP Component)

Whether this message may have been acquired by other links previously.

Syntax

__property bool OutgoingMessageFirstAcquirer[int OutgoingMessageIndex] = { read=FOutgoingMessageFirstAcquirer };

Default Value

False

Remarks

Whether this message may have been acquired by other links previously.

This property specifies whether this message might have previously been acquired by other links.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Boolean

OutgoingMessageGroupId Property (AMQP Component)

The Id of the group this message belongs to.

Syntax

__property String OutgoingMessageGroupId[int OutgoingMessageIndex] = { read=FOutgoingMessageGroupId };

Default Value

""

Remarks

The Id of the group this message belongs to.

This property specifies the Id of the group that this message belongs to. It may be empty if this message does not belong to a group.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageGroupSequence Property (AMQP Component)

The position of this message within its group.

Syntax

__property __int64 OutgoingMessageGroupSequence[int OutgoingMessageIndex] = { read=FOutgoingMessageGroupSequence };

Default Value

0

Remarks

The position of this message within its group.

This property specifies the relative position of this message within its group. It may be -1 if this message does not belong to a group.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Long64

OutgoingMessageLinkName Property (AMQP Component)

The name of the link this message is associated with.

Syntax

__property String OutgoingMessageLinkName[int OutgoingMessageIndex] = { read=FOutgoingMessageLinkName };

Default Value

""

Remarks

The name of the link this message is associated with.

This property holds the name of the link which this message is being sent/was received on.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageId Property (AMQP Component)

The unique Id of this message.

Syntax

__property String OutgoingMessageId[int OutgoingMessageIndex] = { read=FOutgoingMessageId };

Default Value

""

Remarks

The unique Id of this message.

This property holds the unique Id of this message. It may be empty if this message does not have a unique Id.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessagePriority Property (AMQP Component)

The priority of this message.

Syntax

__property int OutgoingMessagePriority[int OutgoingMessageIndex] = { read=FOutgoingMessagePriority };

Default Value

4

Remarks

The priority of this message.

This property holds the priority of this message; the default is 4 (as defined by the AMQP specification).

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Integer

OutgoingMessageReplyTo Property (AMQP Component)

The address of the node to send replies to for this message.

Syntax

__property String OutgoingMessageReplyTo[int OutgoingMessageIndex] = { read=FOutgoingMessageReplyTo };

Default Value

""

Remarks

The address of the node to send replies to for this message.

This property specifies the address of the node to send replies to for this message. It may be empty if this message does not have a specific reply-to node address.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageReplyToGroupId Property (AMQP Component)

The Id of the group to send replies to for this message.

Syntax

__property String OutgoingMessageReplyToGroupId[int OutgoingMessageIndex] = { read=FOutgoingMessageReplyToGroupId };

Default Value

""

Remarks

The Id of the group to send replies to for this message.

This property specifies the Id of the group to send replies to for this message. It may be empty if there is not a specific reply-to group for this message.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageSettled Property (AMQP Component)

Whether this message is settled.

Syntax

__property bool OutgoingMessageSettled[int OutgoingMessageIndex] = { read=FOutgoingMessageSettled };

Default Value

true

Remarks

Whether this message is settled.

This property specifies whether this message is settled or not.

Note that, when constructing a message for sending, this property is ignored if the send settle mode of the link it is sent on is not Mixed (2).

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Boolean

OutgoingMessageSubject Property (AMQP Component)

The subject of this message.

Syntax

__property String OutgoingMessageSubject[int OutgoingMessageIndex] = { read=FOutgoingMessageSubject };

Default Value

""

Remarks

The subject of this message.

This property specifies the subject of this message. It may be empty if this message does not have a subject set.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageTo Property (AMQP Component)

The address of the node which this message is intended for.

Syntax

__property String OutgoingMessageTo[int OutgoingMessageIndex] = { read=FOutgoingMessageTo };

Default Value

""

Remarks

The address of the node which this message is intended for.

This property specifies the address of the node which this message is intended to be delivered to. It my be empty if this message is not intended for a specific destination node.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageTTL Property (AMQP Component)

The time-to-live value for this message.

Syntax

__property __int64 OutgoingMessageTTL[int OutgoingMessageIndex] = { read=FOutgoingMessageTTL };

Default Value

-1

Remarks

The time-to-live value for this message.

This property specifies the time-to-live (TTL) value, in milliseconds, for this message. It may be -1 if this message does not have a TTL.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Long64

OutgoingMessageUserId Property (AMQP Component)

The identity of the user responsible for producing this message.

Syntax

__property String OutgoingMessageUserId[int OutgoingMessageIndex] = { read=FOutgoingMessageUserId };

Default Value

""

Remarks

The identity of the user responsible for producing this message.

This property specifies the identity of the user responsible for producing this message. It may be empty if no specific user was responsible for creating this message.

A message's user Id may be used for verification or authentication by intermediates and/or the final receiver.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageValue Property (AMQP Component)

This message's value.

Syntax

__property String OutgoingMessageValue[int OutgoingMessageIndex] = { read=FOutgoingMessageValue };

Default Value

""

Remarks

This message's value.

This property specifies the value to send in this message. The OutgoingMessageValueType property should be used to specify the data type of the value.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageValueType Property (AMQP Component)

This message's value data type.

Syntax

__property TipqAMQPOutgoingMessageValueTypes OutgoingMessageValueType[int OutgoingMessageIndex] = { read=FOutgoingMessageValueType };

enum TipqAMQPOutgoingMessageValueTypes {
  mvtNull=0,
  mvtBoolean=1,
  mvtUbyte=2,
  mvtUshort=3,
  mvtUint=4,
  mvtUlong=5,
  mvtByte=6,
  mvtShort=7,
  mvtInt=8,
  mvtLong=9,
  mvtFloat=10,
  mvtDouble=11,
  mvtDecimal=12,
  mvtChar=13,
  mvtTimestamp=14,
  mvtUuid=15,
  mvtBinary=16,
  mvtString=17,
  mvtSymbol=18,
  mvtJson=19
};

Default Value

mvtNull

Remarks

This message's value data type.

This property specifies the data type of this message's OutgoingMessageValue.

The table below shows the possible value types, their descriptions, and how to format the data assigned to OutgoingMessageValue. All numeric value types should use their standard string formatting (except for the mvtDecimal (12) type, which should be specified as hex-encoded bytes).

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Integer

Password Property (AMQP Component)

A password to use for SASL authentication.

Syntax

__property String Password = { read=FPassword, write=FSetPassword };

Default Value

""

Remarks

This property contains a password to use for SASL authentication.

This property is not available at design time.

Data Type

String

ReadyToSend Property (AMQP Component)

Indicates whether the component is ready to send data.

Syntax

__property bool ReadyToSend = { read=FReadyToSend };

Default Value

false

Remarks

This property indicates that the underlying TCP/IP subsystem is ready to accept data. This is True after connecting to the remote host, and will become False if a call to SendMessage fails due to a WOULDBLOCK condition.

Once data can be sent again, the ReadyToSend event will fire and this property will be True.

If a WOULDBLOCK error occurs while sending a message the component will automatically complete the transmission when sending is possible. No action needs to be taken to re-send the message. ReadyToSend will fire after the component completes any partially sent messages.

This property is read-only and not available at design time.

Data Type

Boolean

ReceivedMessageAbsoluteExpiryTime Property (AMQP Component)

The absolute time at which this message should be considered expired.

Syntax

__property __int64 ReceivedMessageAbsoluteExpiryTime = { read=FReceivedMessageAbsoluteExpiryTime };

Default Value

0

Remarks

The absolute time at which this message should be considered expired.

This property specifies the absolute time at which this message should be considered expired. It may be -1 if this message does not have an absolute expiry time.

This property's value should be specified in milliseconds relative to the Unix epoch (January 1, 1970 00:00:00 UTC).

This property is read-only and not available at design time.

Data Type

Long64

ReceivedMessageContentEncoding Property (AMQP Component)

The content encoding of this message's data.

Syntax

__property String ReceivedMessageContentEncoding = { read=FReceivedMessageContentEncoding };

Default Value

""

Remarks

The content encoding of this message's data.

This property specifies the content encoding of this message's data. It may be empty if this message does not have a content encoding set.

When constructing a message for sending, this property is ignored if ReceivedMessageValueType is not set to mvtBinary (16).

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageContentType Property (AMQP Component)

The content type of this message's data.

Syntax

__property String ReceivedMessageContentType = { read=FReceivedMessageContentType };

Default Value

""

Remarks

The content type of this message's data.

This property specifies the content type of this message's data. It may be empty if this message does not have a content type set.

When constructing a message for sending, this property is ignored if ReceivedMessageValueType is not set to mvtBinary (16).

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageCorrelationId Property (AMQP Component)

The correlation Id of this message.

Syntax

__property String ReceivedMessageCorrelationId = { read=FReceivedMessageCorrelationId };

Default Value

""

Remarks

The correlation Id of this message.

This property specifies the correlation Id of this message. It may be empty if this message does not have a correlation Id.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageCreationTime Property (AMQP Component)

The creation time of this message.

Syntax

__property __int64 ReceivedMessageCreationTime = { read=FReceivedMessageCreationTime };

Default Value

0

Remarks

The creation time of this message.

This property specifies the absolute creation time of this message. It may be -1 if this message does not have a creation time set.

This property's value should be specified in milliseconds relative to the Unix epoch (January 1, 1970 00:00:00 UTC).

This property is read-only and not available at design time.

Data Type

Long64

ReceivedMessageDeliveryCount Property (AMQP Component)

How many previous attempts there have been to deliver this message.

Syntax

__property __int64 ReceivedMessageDeliveryCount = { read=FReceivedMessageDeliveryCount };

Default Value

0

Remarks

How many previous attempts there have been to deliver this message.

This property indicates how many (unsuccessful) previous attempts there have been to deliver this message.

This property is read-only and not available at design time.

Data Type

Long64

ReceivedMessageDurable Property (AMQP Component)

Whether this message is durable.

Syntax

__property bool ReceivedMessageDurable = { read=FReceivedMessageDurable };

Default Value

False

Remarks

Whether this message is durable.

This property specifies whether this message is durable or not.

If a message is marked as durable, any intermediate nodes which cannot guarantee that the message won't be lost under any circumstances will not accept the message.

This property is read-only and not available at design time.

Data Type

Boolean

ReceivedMessageFirstAcquirer Property (AMQP Component)

Whether this message may have been acquired by other links previously.

Syntax

__property bool ReceivedMessageFirstAcquirer = { read=FReceivedMessageFirstAcquirer };

Default Value

False

Remarks

Whether this message may have been acquired by other links previously.

This property specifies whether this message might have previously been acquired by other links.

This property is read-only and not available at design time.

Data Type

Boolean

ReceivedMessageGroupId Property (AMQP Component)

The Id of the group this message belongs to.

Syntax

__property String ReceivedMessageGroupId = { read=FReceivedMessageGroupId };

Default Value

""

Remarks

The Id of the group this message belongs to.

This property specifies the Id of the group that this message belongs to. It may be empty if this message does not belong to a group.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageGroupSequence Property (AMQP Component)

The position of this message within its group.

Syntax

__property __int64 ReceivedMessageGroupSequence = { read=FReceivedMessageGroupSequence };

Default Value

0

Remarks

The position of this message within its group.

This property specifies the relative position of this message within its group. It may be -1 if this message does not belong to a group.

This property is read-only and not available at design time.

Data Type

Long64

ReceivedMessageLinkName Property (AMQP Component)

The name of the link this message is associated with.

Syntax

__property String ReceivedMessageLinkName = { read=FReceivedMessageLinkName };

Default Value

""

Remarks

The name of the link this message is associated with.

This property holds the name of the link which this message is being sent/was received on.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageId Property (AMQP Component)

The unique Id of this message.

Syntax

__property String ReceivedMessageId = { read=FReceivedMessageId };

Default Value

""

Remarks

The unique Id of this message.

This property holds the unique Id of this message. It may be empty if this message does not have a unique Id.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessagePriority Property (AMQP Component)

The priority of this message.

Syntax

__property int ReceivedMessagePriority = { read=FReceivedMessagePriority };

Default Value

4

Remarks

The priority of this message.

This property holds the priority of this message; the default is 4 (as defined by the AMQP specification).

This property is read-only and not available at design time.

Data Type

Integer

ReceivedMessageReplyTo Property (AMQP Component)

The address of the node to send replies to for this message.

Syntax

__property String ReceivedMessageReplyTo = { read=FReceivedMessageReplyTo };

Default Value

""

Remarks

The address of the node to send replies to for this message.

This property specifies the address of the node to send replies to for this message. It may be empty if this message does not have a specific reply-to node address.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageReplyToGroupId Property (AMQP Component)

The Id of the group to send replies to for this message.

Syntax

__property String ReceivedMessageReplyToGroupId = { read=FReceivedMessageReplyToGroupId };

Default Value

""

Remarks

The Id of the group to send replies to for this message.

This property specifies the Id of the group to send replies to for this message. It may be empty if there is not a specific reply-to group for this message.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageSettled Property (AMQP Component)

Whether this message is settled.

Syntax

__property bool ReceivedMessageSettled = { read=FReceivedMessageSettled };

Default Value

true

Remarks

Whether this message is settled.

This property specifies whether this message is settled or not.

Note that, when constructing a message for sending, this property is ignored if the send settle mode of the link it is sent on is not Mixed (2).

This property is read-only and not available at design time.

Data Type

Boolean

ReceivedMessageSubject Property (AMQP Component)

The subject of this message.

Syntax

__property String ReceivedMessageSubject = { read=FReceivedMessageSubject };

Default Value

""

Remarks

The subject of this message.

This property specifies the subject of this message. It may be empty if this message does not have a subject set.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageTo Property (AMQP Component)

The address of the node which this message is intended for.

Syntax

__property String ReceivedMessageTo = { read=FReceivedMessageTo };

Default Value

""

Remarks

The address of the node which this message is intended for.

This property specifies the address of the node which this message is intended to be delivered to. It my be empty if this message is not intended for a specific destination node.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageTTL Property (AMQP Component)

The time-to-live value for this message.

Syntax

__property __int64 ReceivedMessageTTL = { read=FReceivedMessageTTL };

Default Value

-1

Remarks

The time-to-live value for this message.

This property specifies the time-to-live (TTL) value, in milliseconds, for this message. It may be -1 if this message does not have a TTL.

This property is read-only and not available at design time.

Data Type

Long64

ReceivedMessageUserId Property (AMQP Component)

The identity of the user responsible for producing this message.

Syntax

__property String ReceivedMessageUserId = { read=FReceivedMessageUserId };

Default Value

""

Remarks

The identity of the user responsible for producing this message.

This property specifies the identity of the user responsible for producing this message. It may be empty if no specific user was responsible for creating this message.

A message's user Id may be used for verification or authentication by intermediates and/or the final receiver.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageValue Property (AMQP Component)

This message's value.

Syntax

__property String ReceivedMessageValue = { read=FReceivedMessageValue };

Default Value

""

Remarks

This message's value.

This property specifies the value to send in this message. The ReceivedMessageValueType property should be used to specify the data type of the value.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageValueType Property (AMQP Component)

This message's value data type.

Syntax

__property TipqAMQPReceivedMessageValueTypes ReceivedMessageValueType = { read=FReceivedMessageValueType };

enum TipqAMQPReceivedMessageValueTypes {
  mvtNull=0,
  mvtBoolean=1,
  mvtUbyte=2,
  mvtUshort=3,
  mvtUint=4,
  mvtUlong=5,
  mvtByte=6,
  mvtShort=7,
  mvtInt=8,
  mvtLong=9,
  mvtFloat=10,
  mvtDouble=11,
  mvtDecimal=12,
  mvtChar=13,
  mvtTimestamp=14,
  mvtUuid=15,
  mvtBinary=16,
  mvtString=17,
  mvtSymbol=18,
  mvtJson=19
};

Default Value

mvtNull

Remarks

This message's value data type.

This property specifies the data type of this message's ReceivedMessageValue.

The table below shows the possible value types, their descriptions, and how to format the data assigned to ReceivedMessageValue. All numeric value types should use their standard string formatting (except for the mvtDecimal (12) type, which should be specified as hex-encoded bytes).

This property is read-only and not available at design time.

Data Type

Integer

ReceiveMode Property (AMQP Component)

Controls what mode new receiver links are created with.

Syntax

__property TipqAMQPReceiveModes ReceiveMode = { read=FReceiveMode, write=FSetReceiveMode };

enum TipqAMQPReceiveModes {
  rmAutomatic=0,
  rmFetch=1
};

Default Value

rmAutomatic

Remarks

This property controls which receive mode newly created receiver links should use to receive messages from the sender. Valid values are:

• rmAutomatic (0 - default)
• rmFetch (1)

Receiving Messages Automatically

In this mode, receiver links will be created with the amount of credit, and the credit threshold, specified by the DefaultCredit and DefaultCreditThreshold configuration settings. Anytime the link's credit reaches the credit threshold, the component will automatically set it back to its initial value.

Fetching Messages On-Demand

In this mode, receiver links will be created with no credit (regardless of what DefaultCredit is set to). When FetchMessage is called, the component will supply the sender with a single credit and then block until a message is received (if the FetchTimeout property is set to zero).

If FetchTimeout is non-zero, the component will only block for the specified number of seconds; once that time expires, it will instruct the sender to consume the credit. If the sender chooses to consume the credit by incrementing the value of the LinkDeliveryCount property rather than by sending a message, then the component will throw an error indicating a timeout.

Refer to FetchMessage and FetchTimeout for more information. amqp.ReceiveMode = AmqpReceiveModes.rmFetch; amqp.CreateReceiverLink("SessionID", "ReceiverLinkName", "SomeTarget");

This property is not available at design time.

Data Type

Integer

RemoteHost Property (AMQP Component)

This property includes the address of the remote host. Domain names are resolved to IP addresses.

Syntax

__property String RemoteHost = { read=FRemoteHost, write=FSetRemoteHost };

Default Value

""

Remarks

This property specifies the IP address (IP number in dotted internet format) or the domain name of the remote host. It is set before a connection is attempted and cannot be changed once a connection is established.

If this property is set to a domain name, a DNS request is initiated, and upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, an error is returned.

If the component is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

Example. Connecting:

TCPClientControl.RemoteHost = "MyHostNameOrIP" TCPClientControl.RemotePort = 777 TCPClientControl.Connected = true

Data Type

String

RemotePort Property (AMQP Component)

The port of the AQMP server (default is 5672). The default port for SSL is 5671.

Syntax

__property int RemotePort = { read=FRemotePort, write=FSetRemotePort };

Default Value

5672

Remarks

This property specifies a service port on the remote host to connect to.

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

This property is not available at design time.

Data Type

Integer

SessionCount Property (AMQP Component)

The number of records in the Session arrays.

Syntax

__property int SessionCount = { read=FSessionCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• SessionIncomingWindow
• SessionName
• SessionOutgoingWindow

The array indices start at 0 and end at SessionCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SessionIncomingWindow Property (AMQP Component)

The incoming window size of this session.

Syntax

__property __int64 SessionIncomingWindow[int SessionIndex] = { read=FSessionIncomingWindow };

Default Value

0

Remarks

The incoming window size of this session.

This property holds the incoming window size (in frames) of this session.

The SessionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SessionCount property.

This property is read-only and not available at design time.

Data Type

Long64

SessionName Property (AMQP Component)

The name of this session.

Syntax

__property String SessionName[int SessionIndex] = { read=FSessionName };

Default Value

""

Remarks

The name of this session.

This property holds the name of this session.

The SessionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SessionCount property.

This property is read-only and not available at design time.

Data Type

String

SessionOutgoingWindow Property (AMQP Component)

The outgoing window size of this session.

Syntax

__property __int64 SessionOutgoingWindow[int SessionIndex] = { read=FSessionOutgoingWindow };

Default Value

0

Remarks

The outgoing window size of this session.

This property holds the outgoing window size (in frames) of this session.

The SessionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SessionCount property.

This property is read-only and not available at design time.

Data Type

Long64

SSLAcceptServerCertEncoded Property (AMQP Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLAcceptServerCertEncoded = { read=FSSLAcceptServerCertEncoded, write=FSetSSLAcceptServerCertEncoded };
__property DynamicArray<Byte> SSLAcceptServerCertEncodedB = { read=FSSLAcceptServerCertEncodedB, write=FSetSSLAcceptServerCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertEncoded Property (AMQP Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded };
__property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertStore Property (AMQP Component)

This is the name of the certificate store for the client certificate.

Syntax

__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore };
__property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

Data Type

Byte Array

SSLCertStorePassword Property (AMQP Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (AMQP Component)

This is the type of certificate store for this certificate.

Syntax

__property TipqAMQPSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };

enum TipqAMQPSSLCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

This is the type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubject Property (AMQP Component)

This is the subject of the certificate used for client authentication.

Syntax

__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.

If a field value contains a comma it must be quoted.

Data Type

String

SSLEnabled Property (AMQP Component)

Whether TLS/SSL is enabled.

Syntax

__property bool SSLEnabled = { read=FSSLEnabled, write=FSetSSLEnabled };

Default Value

False

Remarks

This setting specifies whether TLS/SSL is enabled in the component. When False (default) the component operates in plaintext mode. When True TLS/SSL is enabled.

TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.

If the default port (5672) is selected when SSLEnabled is set to true, the port will automatically be changed to the default port for AMQP with SSL (5671). Likewise, if port 5671 is selected when SSLEnabled is set to false, the port will automatically be changed to the default port. If the port has been set to any value other than the default values, it will remain the same when the value of SSLEnabled changes.

This property is not available at design time.

Data Type

Boolean

SSLProvider Property (AMQP Component)

This specifies the SSL/TLS implementation to use.

Syntax

__property TipqAMQPSSLProviders SSLProvider = { read=FSSLProvider, write=FSetSSLProvider };

enum TipqAMQPSSLProviders {
  sslpAutomatic=0,
  sslpPlatform=1,
  sslpInternal=2
};

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.

Data Type

Integer

SSLServerCertEncoded Property (AMQP Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLServerCertEncoded = { read=FSSLServerCertEncoded };
__property DynamicArray<Byte> SSLServerCertEncodedB = { read=FSSLServerCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Byte Array

Timeout Property (AMQP Component)

A timeout for the component.

Syntax

__property int Timeout = { read=FTimeout, write=FSetTimeout };

Default Value

60

Remarks

If the Timeout property is set to 0, all operations return immediately, potentially failing with a WOULDBLOCK error if data cannot be sent immediately.

If Timeout is set to a positive value, data is sent in a blocking manner and the component will wait for the operation to complete before returning control. The component will handle any potential WOULDBLOCK errors internally and automatically retry the operation for a maximum of Timeout seconds.

The component will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the component raises an exception.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

User Property (AMQP Component)

A username to use for SASL authentication.

Syntax

__property String User = { read=FUser, write=FSetUser };

Default Value

""

Remarks

This property contains a username to use for SASL authentication.

This property is not available at design time.

Data Type

String

CloseLink Method (AMQP Component)

Closes a link.

Syntax

void __fastcall CloseLink(String Name);

Remarks

This method closes the link named Name and removes it from the Link* properties. If no link with the given Name exists, an error will be thrown.

CloseSession Method (AMQP Component)

Closes a session.

Syntax

void __fastcall CloseSession(String Name);

Remarks

This method closes the session named Name and removes it from the Session* properties. If no session with the given Name exists, an error will be thrown.

Any links open on the specified session when this method is called will be automatically closed and removed from the Link* properties.

Config Method (AMQP Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (AMQP Component)

This method connects to a remote host.

Syntax

void __fastcall Connect();

Remarks

This method connects to the remote host specified by RemoteHost and RemotePort. For instance: component.RemoteHost = "MyHostNameOrIP"; component.RemotePort = 7777; component.Connect();

ConnectTo Method (AMQP Component)

This method connects to a remote host.

Syntax

void __fastcall ConnectTo(String Host, int Port);

Remarks

This method connects to the remote host specified by the Host and Port parameters. For instance: component.ConnectTo("MyHostNameOrIP", 777)

CreateReceiverLink Method (AMQP Component)

Creates a new receiver link with the given name on the specified session.

Syntax

void __fastcall CreateReceiverLink(String SessionName, String Name, String Source);

Remarks

This method creates a new receiver link with the given Name on the session specified by SessionName and adds it to the Link* properties. If a link (sender or receiver) with the given Name already exists, or if no session with the given SessionName exists, an error will be thrown.

Source may be set to specify the address of the node at the remote host which should act as the sender. This may not be necessary in all environments, in which case an empty string will suffice.

Receiver links can operate in one of two receive modes: automatic, where the component will work to ensure that messages are received as soon as they are available; and fetch-based, where the component will only "fetch" a new message when explicitly instructed to.

The ReceiveMode property controls which receive mode newly-created receiver links will use; refer to its documentation for more information.

AMQP 1.0's transport protocol has three layers: an overarching connection between two containers, the sessions opened on that connection, and the links (between the containers' nodes) attached to those sessions. amqp.ReceiveMode = AmqpReceiveModes.rmFetch; amqp.CreateReceiverLink("SessionID", "ReceiverLinkName", "SomeTarget");

CreateSenderLink Method (AMQP Component)

Creates a new sender link with the given name on the specified session.

Syntax

void __fastcall CreateSenderLink(String SessionName, String Name, String Target);

Remarks

This method creates a new sender link with the given Name on the session specified by SessionName and adds it to the Link* properties. If a link (sender or receiver) with the given Name already exists, or if no session with the given SessionName exists, an error will be thrown.

Target may be set to specify the address of the node at the remote host which should act as the receiver. This may not be necessary in all environments, in which case an empty string will suffice.

The LinkReadyToSend event will fire when a newly-created sender link is ready to send.

Sender links are created using the Mixed settle mode by default, letting the value of the MessageSettled property control whether each message is settled (the default) or unsettled when it is sent. The DefaultSenderSettleMode configuration setting can be used to control the settle mode that new sender links are created with. Refer to SendMessage for more information on message settlement in general.

AMQP 1.0's transport protocol has three layers: an overarching connection between two containers, the sessions opened on that connection, and the links (between the containers' nodes) attached to those sessions.

CreateSession Method (AMQP Component)

Creates a new session with the given name.

Syntax

void __fastcall CreateSession(String Name);

Remarks

This method creates a new session with the given Name and adds it to the Session* properties. If a session with the given Name already exists, an error will be thrown.

AMQP 1.0's transport protocol has three layers: an overarching connection between two containers, the sessions opened on that connection, and the links (between the containers' nodes) attached to those sessions.

Disconnect Method (AMQP Component)

This method disconnects from the remote host.

Syntax

void __fastcall Disconnect();

Remarks

This method disconnects from the remote host. Calling this method is equivalent to setting the Connected property to False.

DoEvents Method (AMQP Component)

Processes events from the internal message queue.

Syntax

void __fastcall DoEvents();

Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns.

FetchMessage Method (AMQP Component)

Fetches a single message over the specified receiver link.

Syntax

void __fastcall FetchMessage(String LinkName);

Remarks

When FetchMessage is called, the component will supply the sender with a single credit and then block until a message is received (if the FetchTimeout property is set to zero).

If FetchTimeout is non-zero, the component will only block for the specified number of seconds; once that time expires, it will instruct the sender to consume the credit. If the sender chooses to consume the credit by incrementing the value of the LinkDeliveryCount property rather than by sending a message, then the component will throw an error indicating a timeout.

LinkName specifies the receiver link which should fetch a message; if there is no such link, if the specified link is not a receiver link, or if the specified receiver link is not operating in rmSyncGet (1) mode, an error is thrown.

Refer to ReceiveMode and FetchTimeout for more information.

Interrupt Method (AMQP Component)

This method interrupts the current action.

Syntax

void __fastcall Interrupt();

Remarks

This method interrupts the current action. If you use SendFile to upload a file, the component will run synchronously until the upload is completed. This method will allow you to stop the file from uploading without disconnecting from the host.

Reset Method (AMQP Component)

Reset the component.

Syntax

void __fastcall Reset();

Remarks

This method will reset the component's properties to their default values.

ResetMessage Method (AMQP Component)

Resets the Message properties.

Syntax

void __fastcall ResetMessage();

Remarks

This method resets the Message* properties.

SendMsg Method (AMQP Component)

Sends a message on the specified link.

Syntax

void __fastcall SendMsg(String LinkName);

Remarks

Connected Event (AMQP Component)

This event is fired immediately after a connection completes (or fails).

Syntax

typedef struct {
  int StatusCode;
  String Description;
} TipqAMQPConnectedEventParams;
typedef void __fastcall (__closure *TipqAMQPConnectedEvent)(System::TObject* Sender, TipqAMQPConnectedEventParams *e);
__property TipqAMQPConnectedEvent OnConnected = { read=FOnConnected, write=FOnConnected };

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

ConnectionStatus Event (AMQP Component)

This event is fired to indicate changes in the connection state.

Syntax

typedef struct {
  String ConnectionEvent;
  int StatusCode;
  String Description;
} TipqAMQPConnectionStatusEventParams;
typedef void __fastcall (__closure *TipqAMQPConnectionStatusEvent)(System::TObject* Sender, TipqAMQPConnectionStatusEventParams *e);
__property TipqAMQPConnectionStatusEvent OnConnectionStatus = { read=FOnConnectionStatus, write=FOnConnectionStatus };

Remarks

The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

Disconnected Event (AMQP Component)

This event is fired when a connection is closed.

Syntax

typedef struct {
  int StatusCode;
  String Description;
} TipqAMQPDisconnectedEventParams;
typedef void __fastcall (__closure *TipqAMQPDisconnectedEvent)(System::TObject* Sender, TipqAMQPDisconnectedEventParams *e);
__property TipqAMQPDisconnectedEvent OnDisconnected = { read=FOnDisconnected, write=FOnDisconnected };

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.

Please refer to the Error Codes section for more information.

Error Event (AMQP Component)

Information about errors during data delivery.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TipqAMQPErrorEventParams;
typedef void __fastcall (__closure *TipqAMQPErrorEvent)(System::TObject* Sender, TipqAMQPErrorEventParams *e);
__property TipqAMQPErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

LinkReadyToSend Event (AMQP Component)

Fires when a sender link is ready to send messages.

Syntax

typedef struct {
  String LinkName;
  int LinkIndex;
} TipqAMQPLinkReadyToSendEventParams;
typedef void __fastcall (__closure *TipqAMQPLinkReadyToSendEvent)(System::TObject* Sender, TipqAMQPLinkReadyToSendEventParams *e);
__property TipqAMQPLinkReadyToSendEvent OnLinkReadyToSend = { read=FOnLinkReadyToSend, write=FOnLinkReadyToSend };

Remarks

This event fires when a sender link is ready to send messages.

LinkName is the name of the sender link.

LinkIndex is the index of the sender link in the Link* properties.

Log Event (AMQP Component)

Fires once for each log message.

Syntax

typedef struct {
  int LogLevel;
  String Message;
  String LogType;
} TipqAMQPLogEventParams;
typedef void __fastcall (__closure *TipqAMQPLogEvent)(System::TObject* Sender, TipqAMQPLogEventParams *e);
__property TipqAMQPLogEvent OnLog = { read=FOnLog, write=FOnLog };

Remarks

This event fires once for each log message generated by the component. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of the Message. Possible values are:

LogType identifies the type of log entry. Possible values are:

• Info: General information about the component.
• Session: Session status messages.
• Frame: Frame status messages.

MessageIn Event (AMQP Component)

Fires when the component receives a message.

Syntax

typedef struct {
  String SessionName;
  int SessionIndex;
  String LinkName;
  int LinkIndex;
  String MessageId;
  int State;
} TipqAMQPMessageInEventParams;
typedef void __fastcall (__closure *TipqAMQPMessageInEvent)(System::TObject* Sender, TipqAMQPMessageInEventParams *e);
__property TipqAMQPMessageInEvent OnMessageIn = { read=FOnMessageIn, write=FOnMessageIn };

Remarks

This event fires whenever the component receives a message. The message itself is automatically stored in the ReceivedMessage* properties.

Specifying a Delivery Outcome

• 0: Accepted - The message has been processed successfully.
• 1: Rejected - The message failed to process successfully. Includes an error describing why.
• 2: Released - The message has not been (and will not be) processed.
• 3: Modified - Same as "Released", but with additional metadata for the sender.

When State is set to Rejected (1), the component will include error metadata when it informs the sender of the outcome. Set the RejectErrorCondition and RejectErrorDescription configuration settings before the event handler finishes to specify this error information.

When State is set to Modified (3), the component can include additional metadata when it informs the sender of the outcome. Set zero or more of the ModifiedDeliveryFailed, ModifiedMessageAnnotations, and ModifiedUndeliverableHere configuration settings before the event handler finishes to specify this additional metadata.

Other Parameters

SessionIndex is the index of the session in the Session* properties.

LinkName is the name of the link the message was transmitted on.

LinkIndex is the index of the link in the Link* properties.

MessageId is the Id of the message; it may be empty if a message Id was not set.

MessageOut Event (AMQP Component)

Fires when the component sends a message.

Syntax

typedef struct {
  String SessionName;
  int SessionIndex;
  String LinkName;
  int LinkIndex;
  String MessageId;
} TipqAMQPMessageOutEventParams;
typedef void __fastcall (__closure *TipqAMQPMessageOutEvent)(System::TObject* Sender, TipqAMQPMessageOutEventParams *e);
__property TipqAMQPMessageOutEvent OnMessageOut = { read=FOnMessageOut, write=FOnMessageOut };

Remarks

This event fires whenever the component sends a message.

SessionName is the name of the session the message was transmitted on.

SessionIndex is the index of the session in the Session* properties.

LinkName is the name of the link the message was transmitted on.

LinkIndex is the index of the link in the Link* properties.

MessageId is the Id of the message; it may be empty if a message Id was not set.

MessageOutcome Event (AMQP Component)

Fires when a message's outcome is available.

Syntax

typedef struct {
  String SessionName;
  int SessionIndex;
  String LinkName;
  int LinkIndex;
  String MessageId;
  int Direction;
  int State;
} TipqAMQPMessageOutcomeEventParams;
typedef void __fastcall (__closure *TipqAMQPMessageOutcomeEvent)(System::TObject* Sender, TipqAMQPMessageOutcomeEventParams *e);
__property TipqAMQPMessageOutcomeEvent OnMessageOutcome = { read=FOnMessageOutcome, write=FOnMessageOutcome };

Remarks

This event fires whenever the outcome for a message (incoming or outgoing) is available.

SessionName is the name of the session the message was transmitted on.

SessionIndex is the index of the session in the Session* properties.

LinkName is the name of the link the message was transmitted on.

LinkIndex is the index of the link in the Link* properties.

MessageId is the Id of the message; it may be empty if a message Id was not set.

Direction indicates whether this outcome was sent (0) or received (1).

State indicates the actual message outcome. Possible values are:

• 0: Accepted - The message has been processed successfully.
• 1: Rejected - The message failed to process successfully. Includes an error describing why.
• 2: Released - The message has not been (and will not be) processed.
• 3: Modified - Same as "Released", but with additional metadata for the sender.

When State is Rejected (1), the RejectErrorCondition and RejectErrorDescription configuration settings can be queried before the event handler finishes to retrieve the error information.

When State is Modified (3), the ModifiedDeliveryFailed, ModifiedMessageAnnotations, and ModifiedUndeliverableHere configuration settings can be queried before the event handler finishes to retrieve the additional metadata.

SSLServerAuthentication Event (AMQP Component)

Fired after the server presents its certificate to the client.

Syntax

typedef struct {
  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;
  String CertSubject;
  String CertIssuer;
  String Status;
  bool Accept;
} TipqAMQPSSLServerAuthenticationEventParams;
typedef void __fastcall (__closure *TipqAMQPSSLServerAuthenticationEvent)(System::TObject* Sender, TipqAMQPSSLServerAuthenticationEventParams *e);
__property TipqAMQPSSLServerAuthenticationEvent OnSSLServerAuthentication = { read=FOnSSLServerAuthentication, write=FOnSSLServerAuthentication };

Remarks

This event is where the client can decide whether to continue with the connection process or not. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK"). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (AMQP Component)

Shows the progress of the secure connection.

Syntax

typedef struct {
  String Message;
} TipqAMQPSSLStatusEventParams;
typedef void __fastcall (__closure *TipqAMQPSSLStatusEvent)(System::TObject* Sender, TipqAMQPSSLStatusEventParams *e);
__property TipqAMQPSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

Config Settings (AMQP Component)

AMQP Config Settings

{
  "type": "map",
  "value": [
    { "type": "symbol", "value": "key1" },
    { "type": "string", "value": "test" },
    { "type": "symbol", "value": "key2" },
    { "type": "int", "value": 100 }
  ]
}

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Trappable Errors (AMQP Component)

AMQP Errors

TCPClient Errors

SSL Errors

TCP/IP Errors