AmazonSQS Control

Properties   Methods   Events   Config Settings   Errors  

The AmazonSQS Control provides an easy interface to Amazon's Simple Queue Service (SQS).

Syntax

AmazonSQS

Remarks

The AmazonSQS Control allows you to access Amazon's Simple Queue Service (SQS). SQS allows you to create globally accessible queues on Amazon's servers. These queues can be used by developers to transfer data between distributed application components, without losing messages or requiring each component to always be available. A brief synopsis follows but please refer to Amazon SQS documentation for details.

You will first need to sign up for the SQS service and obtain the AccessKey and SecretKey from Amazon. Then you can start creating queues in your account using CreateQueue. You can then start adding message's to the queue using CreateMessage and retrieve the same using ListMessages.

There are other methods such as ListQueues, DeleteQueue, DeleteMessage etc. that further enable you to manage your SQS queues.

SmoothMQ is also supported. For compatibility with SmoothMQ, APIRequestFormat must be set to 2. Additionally, it is advisable to set ResolveQueueId to true.

Property List

The following is the full list of the properties of the control with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the control with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the control with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the control with short descriptions. Click on the links for further details.

AccessKey Property (AmazonSQS Control)

The Access Key Id for the Amazon Web Services account.

Syntax

amazonsqscontrol.AccessKey[=string]

Default Value

""

Remarks

This is the username for the Amazon Web Services account. No two accounts may have the same Access Key. This is used along with the SecretKey to authenticate with Amazon servers.

Data Type

String

AttributesCount Property (AmazonSQS Control)

The number of records in the Attributes arrays.

Syntax

amazonsqscontrol.AttributesCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• AttributesName
• AttributesValue

The array indices start at 0 and end at AttributesCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

AttributesName Property (AmazonSQS Control)

The name of the attribute.

Syntax

amazonsqscontrol.AttributesName(AttributesIndex)

Default Value

""

Remarks

The name of the attribute.

The AttributesIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttributesCount property.

This property is read-only and not available at design time.

Data Type

String

AttributesValue Property (AmazonSQS Control)

The value of the attribute.

Syntax

amazonsqscontrol.AttributesValue(AttributesIndex)

Default Value

""

Remarks

The value of the attribute.

The AttributesIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttributesCount property.

This property is read-only and not available at design time.

Data Type

String

FirewallAutoDetect Property (AmazonSQS Control)

Whether to automatically detect and use firewall system settings, if available.

Syntax

amazonsqscontrol.FirewallAutoDetect[=boolean]

Default Value

False

Remarks

Whether to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (AmazonSQS Control)

The type of firewall to connect through.

Syntax

amazonsqscontrol.FirewallType[=integer]

Possible Values

fwNone(0), 
fwTunnel(1), 
fwSOCKS4(2), 
fwSOCKS5(3), 
fwSOCKS4A(10)

Default Value

0

Remarks

The type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (AmazonSQS Control)

The name or IP address of the firewall (optional).

Syntax

amazonsqscontrol.FirewallHost[=string]

Default Value

""

Remarks

The name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the control fails with an error.

Data Type

String

FirewallPassword Property (AmazonSQS Control)

A password if authentication is to be used when connecting through the firewall.

Syntax

amazonsqscontrol.FirewallPassword[=string]

Default Value

""

Remarks

A password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the control fails with an error.

Data Type

String

FirewallPort Property (AmazonSQS Control)

The Transmission Control Protocol (TCP) port for the firewall Host .

Syntax

amazonsqscontrol.FirewallPort[=integer]

Default Value

0

Remarks

The Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (AmazonSQS Control)

A username if authentication is to be used when connecting through a firewall.

Syntax

amazonsqscontrol.FirewallUser[=string]

Default Value

""

Remarks

A username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the control fails with an error.

Data Type

String

LocalHost Property (AmazonSQS Control)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

amazonsqscontrol.LocalHost[=string]

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the control initiate connections (or accept in the case of server controls) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the control is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

MaxMessages Property (AmazonSQS Control)

The maximum number of messages retrieved from the queue.

Syntax

amazonsqscontrol.MaxMessages[=integer]

Default Value

1

Remarks

The maximum number of messages retrieved by ListMessages. This is not the number of messages that will be returned, but just the maximum number that will be returned.

Amazon's SQS service dictates that this parameter should be between 1 to 10, all other values are illegal.

Data Type

Integer

MessagesCount Property (AmazonSQS Control)

The number of records in the Messages arrays.

Syntax

amazonsqscontrol.MessagesCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• MessagesBody
• MessagesId
• MessagesMD5
• MessagesReceiptHandle

The array indices start at 0 and end at MessagesCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

MessagesBody Property (AmazonSQS Control)

The body of the SQS message.

Syntax

amazonsqscontrol.MessagesBody(MessagesIndex)

Default Value

""

Remarks

The body of the SQS message.

The MessagesIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagesCount property.

This property is read-only and not available at design time.

Data Type

String

MessagesId Property (AmazonSQS Control)

The ID of the SQS message.

Syntax

amazonsqscontrol.MessagesId(MessagesIndex)

Default Value

""

Remarks

The ID of the SQS message.

The MessagesIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagesCount property.

This property is read-only and not available at design time.

Data Type

String

MessagesMD5 Property (AmazonSQS Control)

The MD5 of the SQS message.

Syntax

amazonsqscontrol.MessagesMD5(MessagesIndex)

Default Value

""

Remarks

The MD5 of the SQS message.

The MessagesIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagesCount property.

This property is read-only and not available at design time.

Data Type

String

MessagesReceiptHandle Property (AmazonSQS Control)

The Receipt handle of the SQS message.

Syntax

amazonsqscontrol.MessagesReceiptHandle(MessagesIndex)

Default Value

""

Remarks

The Receipt handle of the SQS message.

The MessagesIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessagesCount property.

This property is read-only and not available at design time.

Data Type

String

OtherHeaders Property (AmazonSQS Control)

Other headers as determined by the user (optional).

Syntax

amazonsqscontrol.OtherHeaders[=string]

Default Value

""

Remarks

This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like ContentType and From.

The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by CRLF (Chr$(13) & Chr$(10)) .

Use this property with caution. If this property contains invalid headers, HTTP requests may fail.

This property is useful for extending the functionality of the control beyond what is provided.

This property is not available at design time.

Data Type

String

ProxyAuthScheme Property (AmazonSQS Control)

The type of authorization to perform when connecting to the proxy.

Syntax

amazonsqscontrol.ProxyAuthScheme[=integer]

Possible Values

authBasic(0), 
authDigest(1), 
authProprietary(2), 
authNone(3), 
authNtlm(4), 
authNegotiate(5)

Default Value

0

Remarks

The type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the control will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the control. Look at the configuration file for the control being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (AmazonSQS Control)

Whether to automatically detect and use proxy system settings, if available.

Syntax

amazonsqscontrol.ProxyAutoDetect[=boolean]

Default Value

False

Remarks

Whether to automatically detect and use proxy system settings, if available. The default value is .

Data Type

Boolean

ProxyPassword Property (AmazonSQS Control)

A password if authentication is to be used for the proxy.

Syntax

amazonsqscontrol.ProxyPassword[=string]

Default Value

""

Remarks

A password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (AmazonSQS Control)

The Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

amazonsqscontrol.ProxyPort[=integer]

Default Value

80

Remarks

The Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (AmazonSQS Control)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

amazonsqscontrol.ProxyServer[=string]

Default Value

""

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (AmazonSQS Control)

When to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

amazonsqscontrol.ProxySSL[=integer]

Possible Values

psAutomatic(0), 
psAlways(1), 
psNever(2), 
psTunnel(3)

Default Value

0

Remarks

When to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

Data Type

Integer

ProxyUser Property (AmazonSQS Control)

A username if authentication is to be used for the proxy.

Syntax

amazonsqscontrol.ProxyUser[=string]

Default Value

""

Remarks

A username if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

QueuePrefix Property (AmazonSQS Control)

QueuePrefix can be used to filter the queues listed.

Syntax

amazonsqscontrol.QueuePrefix[=string]

Default Value

""

Remarks

Only the queues whose names start with the specified QueuePrefix are listed when ListQueues is called.

Data Type

String

QueuesCount Property (AmazonSQS Control)

The number of records in the Queues arrays.

Syntax

amazonsqscontrol.QueuesCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• QueuesId
• QueuesUrl

The array indices start at 0 and end at QueuesCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

QueuesId Property (AmazonSQS Control)

The ID of the SQS queue.

Syntax

amazonsqscontrol.QueuesId(QueuesIndex)

Default Value

""

Remarks

The ID of the SQS queue.

The QueuesIndex parameter specifies the index of the item in the array. The size of the array is controlled by the QueuesCount property.

This property is read-only and not available at design time.

Data Type

String

QueuesUrl Property (AmazonSQS Control)

The URL of the SQS queue.

Syntax

amazonsqscontrol.QueuesUrl(QueuesIndex)

Default Value

""

Remarks

The URL of the SQS queue.

The QueuesIndex parameter specifies the index of the item in the array. The size of the array is controlled by the QueuesCount property.

This property is read-only and not available at design time.

Data Type

String

Referer Property (AmazonSQS Control)

This property includes the referer URL/document (optional).

Syntax

amazonsqscontrol.Referer[=string]

Default Value

""

Remarks

If this property contains a nonempty string, a Referer HTTP request header is added to the request. The purpose of the header is to show the document referring the requested URL.

This property is not available at design time.

Data Type

String

SecretKey Property (AmazonSQS Control)

The Secret Access Key for the Amazon Web Services account.

Syntax

amazonsqscontrol.SecretKey[=string]

Default Value

""

Remarks

This property describes the secret key to the Amazon account. It should not be shared with others. The SecretKey is used along with the AccessKey in the authentication process with Amazon servers.

Data Type

String

SSLAcceptServerCertEffectiveDate Property (AmazonSQS Control)

The date on which this certificate becomes valid.

Syntax

amazonsqscontrol.SSLAcceptServerCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExpirationDate Property (AmazonSQS Control)

The date on which the certificate expires.

Syntax

amazonsqscontrol.SSLAcceptServerCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExtendedKeyUsage Property (AmazonSQS Control)

A comma-delimited list of extended key usage identifiers.

Syntax

amazonsqscontrol.SSLAcceptServerCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprint Property (AmazonSQS Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA1 Property (AmazonSQS Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA256 Property (AmazonSQS Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLAcceptServerCertIssuer Property (AmazonSQS Control)

The issuer of the certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKey Property (AmazonSQS Control)

The private key of the certificate (if available).

Syntax

amazonsqscontrol.SSLAcceptServerCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKeyAvailable Property (AmazonSQS Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLAcceptServerCertPrivateKeyContainer Property (AmazonSQS Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

amazonsqscontrol.SSLAcceptServerCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKey Property (AmazonSQS Control)

The public key of the certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyAlgorithm Property (AmazonSQS Control)

The textual description of the certificate's public key algorithm.

Syntax

amazonsqscontrol.SSLAcceptServerCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyLength Property (AmazonSQS Control)

The length of the certificate's public key (in bits).

Syntax

amazonsqscontrol.SSLAcceptServerCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertSerialNumber Property (AmazonSQS Control)

The serial number of the certificate encoded as a string.

Syntax

amazonsqscontrol.SSLAcceptServerCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLAcceptServerCertSignatureAlgorithm Property (AmazonSQS Control)

The text description of the certificate's signature algorithm.

Syntax

amazonsqscontrol.SSLAcceptServerCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertStore Property (AmazonSQS Control)

The name of the certificate store for the client certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password-protected, specify the password in SSLAcceptServerCertStorePassword.

SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertStoreB.

Data Type

Binary String

SSLAcceptServerCertStorePassword Property (AmazonSQS Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

amazonsqscontrol.SSLAcceptServerCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLAcceptServerCertStoreType Property (AmazonSQS Control)

The type of certificate store for this certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLAcceptServerCertSubjectAltNames Property (AmazonSQS Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintMD5 Property (AmazonSQS Control)

The MD5 hash of the certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA1 Property (AmazonSQS Control)

The SHA-1 hash of the certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA256 Property (AmazonSQS Control)

The SHA-256 hash of the certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsage Property (AmazonSQS Control)

The text description of UsageFlags .

Syntax

amazonsqscontrol.SSLAcceptServerCertUsage

Default Value

""

Remarks

The text description of SSLAcceptServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsageFlags Property (AmazonSQS Control)

The flags that show intended use for the certificate.

Syntax

amazonsqscontrol.SSLAcceptServerCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:

Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertVersion Property (AmazonSQS Control)

The certificate's version number.

Syntax

amazonsqscontrol.SSLAcceptServerCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLAcceptServerCertSubject Property (AmazonSQS Control)

The subject of the certificate used for client authentication.

Syntax

amazonsqscontrol.SSLAcceptServerCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLAcceptServerCertEncoded Property (AmazonSQS Control)

The certificate (PEM/Base64 encoded).

Syntax

amazonsqscontrol.SSLAcceptServerCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLCertEffectiveDate Property (AmazonSQS Control)

The date on which this certificate becomes valid.

Syntax

amazonsqscontrol.SSLCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLCertExpirationDate Property (AmazonSQS Control)

The date on which the certificate expires.

Syntax

amazonsqscontrol.SSLCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLCertExtendedKeyUsage Property (AmazonSQS Control)

A comma-delimited list of extended key usage identifiers.

Syntax

amazonsqscontrol.SSLCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLCertFingerprint Property (AmazonSQS Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

amazonsqscontrol.SSLCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLCertFingerprintSHA1 Property (AmazonSQS Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

amazonsqscontrol.SSLCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLCertFingerprintSHA256 Property (AmazonSQS Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

amazonsqscontrol.SSLCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLCertIssuer Property (AmazonSQS Control)

The issuer of the certificate.

Syntax

amazonsqscontrol.SSLCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLCertPrivateKey Property (AmazonSQS Control)

The private key of the certificate (if available).

Syntax

amazonsqscontrol.SSLCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLCertPrivateKeyAvailable Property (AmazonSQS Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

amazonsqscontrol.SSLCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLCertPrivateKeyContainer Property (AmazonSQS Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

amazonsqscontrol.SSLCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLCertPublicKey Property (AmazonSQS Control)

The public key of the certificate.

Syntax

amazonsqscontrol.SSLCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLCertPublicKeyAlgorithm Property (AmazonSQS Control)

The textual description of the certificate's public key algorithm.

Syntax

amazonsqscontrol.SSLCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertPublicKeyLength Property (AmazonSQS Control)

The length of the certificate's public key (in bits).

Syntax

amazonsqscontrol.SSLCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLCertSerialNumber Property (AmazonSQS Control)

The serial number of the certificate encoded as a string.

Syntax

amazonsqscontrol.SSLCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLCertSignatureAlgorithm Property (AmazonSQS Control)

The text description of the certificate's signature algorithm.

Syntax

amazonsqscontrol.SSLCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertStore Property (AmazonSQS Control)

The name of the certificate store for the client certificate.

Syntax

amazonsqscontrol.SSLCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password-protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertStoreB.

Data Type

Binary String

SSLCertStorePassword Property (AmazonSQS Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

amazonsqscontrol.SSLCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (AmazonSQS Control)

The type of certificate store for this certificate.

Syntax

amazonsqscontrol.SSLCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubjectAltNames Property (AmazonSQS Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

amazonsqscontrol.SSLCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLCertThumbprintMD5 Property (AmazonSQS Control)

The MD5 hash of the certificate.

Syntax

amazonsqscontrol.SSLCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA1 Property (AmazonSQS Control)

The SHA-1 hash of the certificate.

Syntax

amazonsqscontrol.SSLCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA256 Property (AmazonSQS Control)

The SHA-256 hash of the certificate.

Syntax

amazonsqscontrol.SSLCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertUsage Property (AmazonSQS Control)

The text description of UsageFlags .

Syntax

amazonsqscontrol.SSLCertUsage

Default Value

""

Remarks

The text description of SSLCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLCertUsageFlags Property (AmazonSQS Control)

The flags that show intended use for the certificate.

Syntax

amazonsqscontrol.SSLCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:

Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLCertVersion Property (AmazonSQS Control)

The certificate's version number.

Syntax

amazonsqscontrol.SSLCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLCertSubject Property (AmazonSQS Control)

The subject of the certificate used for client authentication.

Syntax

amazonsqscontrol.SSLCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLCertEncoded Property (AmazonSQS Control)

The certificate (PEM/Base64 encoded).

Syntax

amazonsqscontrol.SSLCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLProvider Property (AmazonSQS Control)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

amazonsqscontrol.SSLProvider[=integer]

Possible Values

sslpAutomatic(0), 
sslpPlatform(1), 
sslpInternal(2)

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the control will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The control will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

Data Type

Integer

SSLServerCertEffectiveDate Property (AmazonSQS Control)

The date on which this certificate becomes valid.

Syntax

amazonsqscontrol.SSLServerCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExpirationDate Property (AmazonSQS Control)

The date on which the certificate expires.

Syntax

amazonsqscontrol.SSLServerCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExtendedKeyUsage Property (AmazonSQS Control)

A comma-delimited list of extended key usage identifiers.

Syntax

amazonsqscontrol.SSLServerCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLServerCertFingerprint Property (AmazonSQS Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

amazonsqscontrol.SSLServerCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA1 Property (AmazonSQS Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

amazonsqscontrol.SSLServerCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA256 Property (AmazonSQS Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

amazonsqscontrol.SSLServerCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLServerCertIssuer Property (AmazonSQS Control)

The issuer of the certificate.

Syntax

amazonsqscontrol.SSLServerCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLServerCertPrivateKey Property (AmazonSQS Control)

The private key of the certificate (if available).

Syntax

amazonsqscontrol.SSLServerCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLServerCertPrivateKeyAvailable Property (AmazonSQS Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

amazonsqscontrol.SSLServerCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLServerCertPrivateKeyContainer Property (AmazonSQS Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

amazonsqscontrol.SSLServerCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLServerCertPublicKey Property (AmazonSQS Control)

The public key of the certificate.

Syntax

amazonsqscontrol.SSLServerCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyAlgorithm Property (AmazonSQS Control)

The textual description of the certificate's public key algorithm.

Syntax

amazonsqscontrol.SSLServerCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyLength Property (AmazonSQS Control)

The length of the certificate's public key (in bits).

Syntax

amazonsqscontrol.SSLServerCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLServerCertSerialNumber Property (AmazonSQS Control)

The serial number of the certificate encoded as a string.

Syntax

amazonsqscontrol.SSLServerCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLServerCertSignatureAlgorithm Property (AmazonSQS Control)

The text description of the certificate's signature algorithm.

Syntax

amazonsqscontrol.SSLServerCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertStore Property (AmazonSQS Control)

The name of the certificate store for the client certificate.

Syntax

amazonsqscontrol.SSLServerCertStore

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password-protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertStoreB.

This property is read-only.

Data Type

Binary String

SSLServerCertStorePassword Property (AmazonSQS Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

amazonsqscontrol.SSLServerCertStorePassword

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

SSLServerCertStoreType Property (AmazonSQS Control)

The type of certificate store for this certificate.

Syntax

amazonsqscontrol.SSLServerCertStoreType

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

Integer

SSLServerCertSubjectAltNames Property (AmazonSQS Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

amazonsqscontrol.SSLServerCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLServerCertThumbprintMD5 Property (AmazonSQS Control)

The MD5 hash of the certificate.

Syntax

amazonsqscontrol.SSLServerCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA1 Property (AmazonSQS Control)

The SHA-1 hash of the certificate.

Syntax

amazonsqscontrol.SSLServerCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA256 Property (AmazonSQS Control)

The SHA-256 hash of the certificate.

Syntax

amazonsqscontrol.SSLServerCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertUsage Property (AmazonSQS Control)

The text description of UsageFlags .

Syntax

amazonsqscontrol.SSLServerCertUsage

Default Value

""

Remarks

The text description of SSLServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLServerCertUsageFlags Property (AmazonSQS Control)

The flags that show intended use for the certificate.

Syntax

amazonsqscontrol.SSLServerCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:

Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLServerCertVersion Property (AmazonSQS Control)

The certificate's version number.

Syntax

amazonsqscontrol.SSLServerCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLServerCertSubject Property (AmazonSQS Control)

The subject of the certificate used for client authentication.

Syntax

amazonsqscontrol.SSLServerCertSubject

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

SSLServerCertEncoded Property (AmazonSQS Control)

The certificate (PEM/Base64 encoded).

Syntax

amazonsqscontrol.SSLServerCertEncoded

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertEncodedB.

This property is read-only and not available at design time.

Data Type

Binary String

StatusLine Property (AmazonSQS Control)

This property is the first line of the last server response.

Syntax

amazonsqscontrol.StatusLine

Default Value

""

Remarks

This property contains the first line of the last server response. This value can be used for diagnostic purposes. If an HTTP error is returned when calling a method of the control, the error string is the same as the StatusLine property.

The HTTP protocol specifies the structure of the StatusLine as follows: [HTTP version] [Result Code] [Description].

This property is read-only and not available at design time.

Data Type

String

Timeout Property (AmazonSQS Control)

The timeout for the control.

Syntax

amazonsqscontrol.Timeout[=integer]

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the control will wait for the operation to complete before returning control.

The control will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the control fails with an error.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

UseSSL Property (AmazonSQS Control)

Use SSL when accessing the service.

Syntax

amazonsqscontrol.UseSSL[=boolean]

Default Value

True

Remarks

Use this property to specify whether the control should use SSL when connecting to the service.

This property is not available at design time.

Data Type

Boolean

VisibilityTimeout Property (AmazonSQS Control)

The visibility duration for messages in the queue.

Syntax

amazonsqscontrol.VisibilityTimeout[=integer]

Default Value

-1

Remarks

Visibility timeout is used to guard against multiple delivery. Successive calls to ListMessages on a queue will not return any message again until the timeout expires, after which the message may reappear unless deleted with DeleteMessage.

A default visibility timeout is configured when a queue is created using CreateQueue, it can also be altered when a message is added using CreateMessage or when they are retrieved using ListMessages.

The default value for VisibilityTimeout is -1, which notifies the component that you would like to use the default behavior for the current Queue.

Note: Unlike messages received from standard queues, messages received from FIFO queues can only be deleted within their VisibilityTimeout. Attempting to call DeleteMessage for a message received from a FIFO queue after its VisibilityTimeout has expired will cause the server to return an error. Keep this in mind when picking a VisibilityTimeout value to create a FIFO queue and/or retrieve messages with.

Data Type

Integer

AddPermission Method (AmazonSQS Control)

Adds a permission to a queue for a specific account, which allows for sharing access to the queue.

Syntax

amazonsqscontrol.AddPermission QueueId, UserLabel, AmazonAccount, PermissionName

Remarks

This method adds a permission to the queue specified by QueueId for the user account specified by AmazonAccount. UserLabel is the unique identification of the permission you're granting, and is used when deleting the permission via the RemovePermission method. The current list of values you may pass in the PermissionName parameter are listed below:

• SendMessage
• ReceiveMessage
• DeleteMessage
• ChangeMessageVisibility
• GetQueueAttributes

Note that when you create a queue, you have full control access rights for the queue. Only you (as owner of the queue) can grant or deny permissions to the queue.

AddPermission writes an SQS-generated policy. If you want to write your own policy, use SetQueueAttribute to upload your policy.

This method returns the RequestId contained in the Amazon response.

ChangeMessageVisibility Method (AmazonSQS Control)

Changes the visibility timeout of a message.

Syntax

amazonsqscontrol.ChangeMessageVisibility QueueId, ReceiptHandle, VisiblityTimeout

Remarks

Changes the visibility of the message specified by ReceiptHandle in the queue specified by QueueId. The maximum allowed timeout value you can set the value to is 12 hours. This means you can't extend the timeout of a message in an existing queue to more than a total visibility timeout of 12 hours.

This method returns the RequestId contained in the Amazon response.

Config Method (AmazonSQS Control)

Sets or retrieves a configuration setting.

Syntax

amazonsqscontrol.Config ConfigurationString

Remarks

Config is a generic method available in every control. It is used to set and retrieve configuration settings for the control.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateMessage Method (AmazonSQS Control)

Adds a message to a queue.

Syntax

amazonsqscontrol.CreateMessage QueueId, Message

Remarks

Adds a message to the queue specified. If VisibilityTimeout is specified it is updated for all the messages in the queue.

CreateMessage returns a message id assigned to the message that is added to a queue. This can then be used to ListMessages or DeleteMessage.

Note: When adding a message to a FIFO queue, the MessageGroupId configuration setting must be populated before calling this method.

CreateQueue Method (AmazonSQS Control)

Creates an SQS queue.

Syntax

amazonsqscontrol.CreateQueue QueueName

Remarks

A queue with the specified name is created.

CreateQueue returns a queue id assigned to the queue. This can then be used to CreateMessage or DeleteQueue.

If the QueueName ends with .fifo, the queue will be created as a FIFO queue. Alternatively, if the UseFIFOQueues configuration setting is enabled, the control will always attempt to create FIFO queues, appending .fifo to the given QueueName if necessary (all FIFO queues' names must have that suffix).

DeleteMessage Method (AmazonSQS Control)

Deletes the message specified.

Syntax

amazonsqscontrol.DeleteMessage QueueId, ReceiptHandle

Remarks

Deletes the message specified by ReceiptHandle from the queue specified by QueueId.

Note: Unlike messages received from standard queues, messages received from FIFO queues can only be deleted within their VisibilityTimeout. Attempting to call DeleteMessage for a message received from a FIFO queue after its VisibilityTimeout has expired will cause the server to return an error.

DeleteQueue Method (AmazonSQS Control)

Deletes a queue.

Syntax

amazonsqscontrol.DeleteQueue QueueId

Remarks

Deletes the queue specified by QueueId.

DoEvents Method (AmazonSQS Control)

This method processes events from the internal message queue.

Syntax

amazonsqscontrol.DoEvents 

Remarks

When DoEvents is called, the control processes any available events. If no events are available, it waits for a preset period of time, and then returns.

GetQueueAttributes Method (AmazonSQS Control)

Returns all attributes of a queue.

Syntax

amazonsqscontrol.GetQueueAttributes QueueId

Remarks

This method retrieves all of the attributes of the queue specified by QueueId, and stores them in the Attributes collection. Queues currently have five attributes that may be returned:

• ApproximateNumberOfMessages
• VisibilityTimeout (for more information, see Visibility Timeout)
• CreatedTimestamp
• LastModifiedTimestamp
• Policy

This method returns the RequestId contained in the Amazon response.

GetXValue Method (AmazonSQS Control)

Retrieves a valid XPath expression from the HTTP response after calling SendCustomRequest .

Syntax

amazonsqscontrol.GetXValue XPath

Remarks

This method allows a user to retrieve a valid XPath expression from the HTTP response after calling SendCustomRequest.

Interrupt Method (AmazonSQS Control)

This method interrupts the current method.

Syntax

amazonsqscontrol.Interrupt 

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ListMessages Method (AmazonSQS Control)

Gets messages from the queue.

Syntax

amazonsqscontrol.ListMessages QueueId

Remarks

This method retrieves messages from the queue specified by QueueId, and fires a Message event for each message it receives. The messages may also be accessed using the property Messages.

If VisibilityTimeout greater than -1 it is applied to the messages, otherwise the default timeout of the queue used. Only one message is retrieved by default; this behavior may be modified by changing MaxMessages.

Note: Unlike messages received from standard queues, messages received from FIFO queues can only be deleted within their VisibilityTimeout. Attempting to call DeleteMessage for a message received from a FIFO queue after its VisibilityTimeout has expired will cause the server to return an error.

ListQueues Method (AmazonSQS Control)

Lists the queues under the current account.

Syntax

amazonsqscontrol.ListQueues 

Remarks

This method will fire a Queue event for each queue available for the Amazon SQS account specified by AccessKey. The listing may be filtered using QueuePrefix.

RemovePermission Method (AmazonSQS Control)

The RemovePermission action revokes any permissions in the queue policy that matches the UserLabel parameter.

Syntax

amazonsqscontrol.RemovePermission QueueId, UserLabel

Remarks

Note that only the owner of the queue may revoke previously added permissions.

This method returns the RequestId contained in the Amazon response.

Reset Method (AmazonSQS Control)

Resets request-related properties.

Syntax

amazonsqscontrol.Reset 

Remarks

Calling this method will reset the component to the original state.

ResetHeaders Method (AmazonSQS Control)

Resets all HTTP headers, cookies, and LocalFile.

Syntax

amazonsqscontrol.ResetHeaders 

Remarks

Resets all the HTTP headers as well as LocalFile to "" (empty string).

Call this method before creating a new request, so that headers and query parameters from the previous request are not carried over to the next one.

SendCustomRequest Method (AmazonSQS Control)

Allows the sending of a custom request to an Amazon web service.

Syntax

amazonsqscontrol.SendCustomRequest Url, RequestData, OtherHeaders

Remarks

Allows the sending of a custom request to the Amazon web service. The URL parameter describes the endpoint that is being targeted. The RequestData is set to any data required for the request. The OtherHeaders parameter is used to set any additional headers that should be set for the request.

SetQueueAttribute Method (AmazonSQS Control)

Sets an attribute of a queue.

Syntax

amazonsqscontrol.SetQueueAttribute QueueId, AttributeName, AttributeValue

Remarks

This method sets attributes of the queue specified by QueueId. When you change a queue's attributes, the change can take up to 60 seconds to propagate throughout the SQS system.

This method returns the RequestId contained in the Amazon response.

Connected Event (AmazonSQS Control)

Fired immediately after a connection completes (or fails).

Syntax

Sub amazonsqscontrol_Connected(StatusCode As Integer, Description As String)

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error. The corresponding Visual Basic error code can be obtained by adding 15001 to this value.

Please refer to the Error Codes section for more information.

Disconnected Event (AmazonSQS Control)

Fired when a connection is closed.

Syntax

Sub amazonsqscontrol_Disconnected(StatusCode As Integer, Description As String)

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error. The corresponding Visual Basic error code can be obtained by adding 15001 to this value.

Please refer to the Error Codes section for more information.

EndTransfer Event (AmazonSQS Control)

Fired when a document finishes transferring.

Syntax

Sub amazonsqscontrol_EndTransfer(Direction As Integer)

Remarks

This event is fired first when the client finishes sending data to the server (in a POST or PUT request) and then when the document text finishes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (AmazonSQS Control)

Fired when information is available about errors during data delivery.

Syntax

Sub amazonsqscontrol_Error(ErrorCode As Integer, Description As String)

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the control fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Header Event (AmazonSQS Control)

Fired every time a header line comes in.

Syntax

Sub amazonsqscontrol_Header(Field As String, Value As String)

Remarks

The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

Message Event (AmazonSQS Control)

Fired for each message retrieved from the queue.

Syntax

Sub amazonsqscontrol_Message(MessageId As String, ReceiptHandle As String, MessageData As String, MD5 As String)

Remarks

When ListMessages is invoked the control fires Message for each message retrieved. The number of messages retrieved are specified using MaxMessages. OtherData is reserved for future use.

Queue Event (AmazonSQS Control)

Fired for each queue of the user.

Syntax

Sub amazonsqscontrol_Queue(QueueId As String, URL As String)

Remarks

When ListQueues is invoked the control fires Queue for each queue.

SSLServerAuthentication Event (AmazonSQS Control)

Fired after the server presents its certificate to the client.

Syntax

Sub amazonsqscontrol_SSLServerAuthentication(CertEncoded As String, CertSubject As String, CertIssuer As String, Status As String, Accept As Boolean)

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (AmazonSQS Control)

Fired when secure connection progress messages are available.

Syntax

Sub amazonsqscontrol_SSLStatus(Message As String)

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (AmazonSQS Control)

Fired when a document starts transferring (after the headers).

Syntax

Sub amazonsqscontrol_StartTransfer(Direction As Integer)

Remarks

This event is fired first when the client starts sending data to the server (in a POST or PUT request) and then when the document text starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Status Event (AmazonSQS Control)

Fired when the HTTP status line is received from the server.

Syntax

Sub amazonsqscontrol_Status(HTTPVersion As String, StatusCode As Integer, Description As String)

Remarks

HTTPVersion is a string containing the HTTP version string as returned from the server (e.g., "1.1").

StatusCode contains the HTTP status code (e.g., 200), and Description the associated message returned by the server (e.g., "OK").

Transfer Event (AmazonSQS Control)

Fired while a document transfers (delivers document).

Syntax

Sub amazonsqscontrol_Transfer(Direction As Integer, BytesTransferred As Long64, PercentDone As Integer, Text As String)

Remarks

The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.

The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Config Settings (AmazonSQS Control)

AmazonSQS Config Settings

HTTP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Trappable Errors (AmazonSQS Control)

AmazonSQS Errors

The control may also return one of the following error codes, which are inherited from other controls.

HTTP Errors

The control may also return one of the following error codes, which are inherited from other controls.

TCPClient Errors

SSL Errors

TCP/IP Errors