CertMgr Class

Properties Methods Events Config Settings Errors

The CertMgr class is used to create, read, and manage certificates.

Syntax

ipworksmq.certmgr()

Remarks

The class methods, such as ListCertificateStores or ListStoreCertificates, are used to list certificate stores and certificates. The corresponding lists are returned through the StoreList and CertList events. Encoded certificates are provided through the events.

You can load a certificate by setting the Cert property of the class. Then you can get information about the certificate through the corresponding fields of the Cert property (described below).

The CertSubject, CertSerialNumber, and CertIssuer properties identify the certificate. The CertEffectiveDate and CertExpirationDate show the time boundaries of the certificate.

CertPublicKey, CertPublicKeyAlgorithm, CertPublicKeyLength, and CertVersion provide information about the certificate keys and the certificate format (version).

CertUsageFlags specifies the intended usage of the certificate. The CertUsage property provides a text description of these flags.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.


Cert	This is the currently selected certificate.
CertExtensions	This is a list of extensions used by the currently selected certificate.
CertStore	This is the certificate store to search for certificates.
CertStorePassword	This is the password for the certificate store (if any).
CertStoreType	This is the type of certificate store for CertStore .
ExportedCert	This is the exported certificate string.
ExportFormat	This is the format to which the certificate is exported.
ExportPrivateKey	This controls whether to export the private key.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.


CheckCRL	This method checks the Certificate Revocation List (CRL) specified by the currently loaded certificate.
CheckOCSP	This method uses Online Certificate Status Protocol (OCSP) to check the status of the currently loaded certificate.
Config	Sets or retrieves a configuration setting.
CreateCertificate	This method creates a new self-signed certificate in the current store.
CreateKey	This method creates a new keyset associated with the provided name.
DeleteCertificate	This method deletes the currently selected certificate from the store.
DeleteKey	This method deletes the keyset associated with the provided name.
ExportCertificate	This method exports the currently selected certificate.
GenerateCSR	This method generates a new Certificate Signing Request (CSR) to be sent to a signing authority.
ImportCertificate	This method imports a certificate from a file into the current certificate store.
ImportSignedCSR	This method imports a signed Certificate Signing Request (CSR).
IssueCertificate	This creates a new certificate in the current store and is signed by the selected certificate.
ListCertificateStores	This lists the certificate stores.
ListKeys	This lists the keysets in a Cryptographic Service Provider (CSP).
ListMachineStores	This lists the machine certificate stores.
ListStoreCertificates	This lists the certificates in a store.
ReadCertificate	This loads a certificate from a file.
ReadCSR	This reads a Certificate Signing Request (CSR).
Reset	This resets all certificate properties to their default values.
SaveCertificate	This method saves the currently selected public certificate to a file.
ShowCertificateChain	This shows the certificate chain.
SignCSR	This creates a signed certificate from a Certificate Signing Request (CSR).

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.


CertChain	This event shows the certificate chain for the certificate (see the ShowCertificateChain method).
CertList	This event lists the certificates in a store (see the ListStoreCertificates method).
Error	Fired when information is available about errors during data delivery.
KeyList	This lists the keysets in a Cryptographic Service Provider (CSP); see the ListKeys method.
Log	This event fires once for each log message.
StoreList	This lists the system certificate stores (see the ListCertificateStores and ListMachineStores methods).

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.


BasicConstraints	The hex-encoded value of the certificate's Basic Constraints extension.
CertComment	A comment to include in a saved certificate.
CertCustomExtensionCount	The number of records in the CertCustomExtension arrays.
CertCustomExtensionCritical[i]	Whether or not the extension is defined as critical.
CertCustomExtensionOID[i]	The ASN of the extension at index 'i'.
CertCustomExtensionValue[i]	The raw value of the extension at index 'i'.
CertExtendedKeyUsage	The extended key usage of the certificate.
CertKeyLength	The public key length for created certificates and keys.
CertKeyType	The types of keys created for new certificates.
CertPublicKeyAlgorithm	The public key algorithm used when a certificate is created.
CertSignatureAlgorithm	The signature algorithm used when creating certificates.
CertSubjectAltNames	Subject Alternative Names for creating or issuing certificates.
CertThumbprint	The thumbprint of the certificate to be loaded.
CertUsageFlags	Sets the flags indicating the usage of the created certificate.
CertValidityOffset	The number of days until the certificate becomes valid.
CertValidityTime	The validity period for the certificate.
CreatedKey	The PKCS8 formatted private and public key pair created after calling CreateKey.
CSP	The Cryptographic Service Provider.
CSRIgnoredExtensions	Extensions to be ignorned when signing a CSR.
CSRKey	The PKCS8 formatted private key to use when generating a CSR.
EncodeExportedCert	Whether the certificate being exported to a string is encoded.
ImportCertAction	Specified the action to take if a matching certificate or a link to a matching certificate already exists.
ImportCertStoreType	The type of certificate store being specified for import.
JWKAlgorithm	The JWK algorithm.
JWKExportX5C	Whether to export a certificate chain to the x5c parameter.
JWKKeyId	The JWK key Id.
JWKKeyOps	The JWK intended key operations list.
JWKUse	The JWK use parameter value.
KeyFormat	How the public and private key are formatted.
KSP	The Key Storage Provider.
LogLevel	The level of detail that is logged.
PFXCertEncryptionAlgorithm	Certificate encryption algorithm used when exporting to PFX format.
PFXKeyEncryptionAlgorithm	Private key encryption algorithm used when exporting to PFX format.
ReplaceKey	Whether or not to replace an existing key when creating a new key.
RequestSubjectAltNames	Subject Alternative Names for a Certificate Signing Request.
TPMMigrationPassword	The password for the certificate or key.
X509Algorithm	Public Key Algorithm OID.
X509SignatureAlgorithm	Signature Algorithm OID.

CertMgr.Cert Property

This is the currently selected certificate.

Syntax

getCert(): Certificate;
setCert(cert: Certificate): void;

Default Value

Remarks

This property is populated when a specified certificate is found or loaded by the class. It is used to specify private or public keys. Set this property to a valid Certificate object to load a certificate and perform different operations, such as DeleteCertificate or ExportCertificate.

Please refer to the Certificate type for a complete list of fields.

CertMgr.CertExtensions Property

This is a list of extensions used by the currently selected certificate.

Syntax

getCertExtensions(): CertExtensionList;
setCertExtensions(certExtensions: CertExtensionList): void;

Default Value

Remarks

This property contains a list of extensions used by the currently selected certificate. When Cert is set, the class will read out any CertExtension and populate this list. This list also may be populated by the user before a call to CreateCertificate to add certificate extensions to the certificate to be created.

This property is not available at design time.

Please refer to the CertExtension type for a complete list of fields.

CertMgr.CertStore Property

This is the certificate store to search for certificates.

Syntax

getCertStore(): Uint8Array;
setCertStore(certStore: Uint8Array): void;

Default Value

"MY"

Remarks

The CertStoreType property specifies the type of the certificate store specified by CertStore. If the store is password protected, specify the password in CertStorePassword.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

CertMgr.CertStorePassword Property

This is the password for the certificate store (if any).

Syntax

getCertStorePassword(): string;
setCertStorePassword(certStorePassword: string): void;

Default Value

Remarks

The value of this property is used to open the certificate store if the certificate store requires a password.

CertMgr.CertStoreType Property

This is the type of certificate store for CertStore .

Syntax

getCertStoreType(): CertMgrCertStoreTypes;
setCertStoreType(certStoreType: CertMgrCertStoreTypes): void;

enum CertMgrCertStoreTypes {
  cstUser,
  cstMachine,
  cstPFXFile,
  cstPFXBlob,
  cstJKSFile,
  cstJKSBlob,
  cstPEMKeyFile,
  cstPEMKeyBlob,
  cstPublicKeyFile,
  cstPublicKeyBlob,
  cstSSHPublicKeyBlob,
  cstP7BFile,
  cstP7BBlob,
  cstSSHPublicKeyFile,
  cstPPKFile,
  cstPPKBlob,
  cstXMLFile,
  cstXMLBlob,
  cstJWKFile,
  cstJWKBlob,
  cstSecurityKey,
  cstBCFKSFile,
  cstBCFKSBlob,
  cstPKCS11,
  cstAuto
}

Default Value

Remarks

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: This store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the and set to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

CertMgr.ExportedCert Property

This is the exported certificate string.

Syntax

getExportedCert(): Uint8Array;

Default Value

Remarks

This property holds the exported certificate if it was not exported to a file.

When calling ExportCertificate if the CertFile parameter is an empty string, the certificate will be exported as a string and available in this property. This allows certificate data to be exported without writing any data to disk.

When ExportFormat is set to PFX or P7B, the EncodeExportedCert setting controls whether the value is binary or Base64 encoded.

This property is read-only and not available at design time.

CertMgr.ExportFormat Property

This is the format to which the certificate is exported.

Syntax

getExportFormat(): string;
setExportFormat(exportFormat: string): void;

Default Value

"PFX"

Remarks

ExportFormat is applicable when ExportCertificate is called and may be used to specify the output format. The applicability of each format depends on whether ExportPrivateKey is set. Some formats are applicable only when exporting to a private key and some values are applicable only when exporting to a public key.


ExportFormat	Applicability	Description
"PFX" or "PKCS12" (default)	Private Keys	A PFX file (PKCS12).
"PEM"	Public and Private Keys	A PEM-formatted public certificate (X509/PKCS1/PKCS8), or PEM formatted private key (PKCS1/PKCS8). When ExportPrivateKey is False the exported certificate will be a PEM formatted X509 public certificate if the certificate being exported includes X509 data. If no X509 information is present, the public key will be exported in PKCS1 public key format for RSA/DSA keys and PKCS8 public key format for ECDSA/EdDSA keys. When ExportPrivateKey is True the exported certificate will be a PEM-formatted PKCS1 private key for RSA/DSA keys and a PEM-formatted PKCS8 private key for ECDSA/EdDSA keys. For example, when ExportPrivateKey is False: -----BEGIN CERTIFICATE----- MIIBkTCB+6ADAgECAgEBMA0GCSqGSIb3DQEBBQUAMA4xDDAKBgNVBAMTAzEwMDAgFw0wNzAx ... Pg49SpQ+HcUibIpum2O0hmnySH7BPGfXD8Lu -----END CERTIFICATE----- Example when ExportPrivateKey is True: -----BEGIN RSA PRIVATE KEY----- MIICWwIBAAKBgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3yaZ98bvry ... 91y8ydb3mQ9l1hZudo2sj8tHnvEgph0r7B8hMM6Qaw== -----END RSA PRIVATE KEY-----
"PKCS1"	Public and Private Keys	A PEM-formatted PKCS1 key file. For example, when ExportPrivateKey is False: -----BEGIN RSA PUBLIC KEY----- MIGJAoGBALAyxV5assz+9v7aHbj93NYN5uGB/1z7kb2Nx4hj02QyRYbcD4htkhK4Qcq2GCsG ... MxW4+pdeN4oEZ6rbMZt01bvMwNRX2GDEyQBhAgMBAAE= -----END RSA PUBLIC KEY----- Example when ExportPrivateKey is True: -----BEGIN RSA PRIVATE KEY----- MIICWwIBAAKBgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3yaZ98bvry ... 91y8ydb3mQ9l1hZudo2sj8tHnvEgph0r7B8hMM6Qaw== -----END RSA PRIVATE KEY-----
"PKCS8"	Public and Private Keys	A PEM-formatted PKCS8 key file. Example when ExportPrivateKey is False: -----BEGIN PUBLIC KEY----- MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCxdTNtpJQbw90cq6aJEx5vRIBrAiCAB9/F ... 8UdUliXeU8UGYjVcMhGy5oPsVeBXGcPAqF2mjXdBKNnzlSlctOLnYRBS5jwRuNfTQQIDAQAB -----END PUBLIC KEY----- Example when ExportPrivateKey is True: -----BEGIN PRIVATE KEY----- MIICdQIBADANBgkqhkiG9w0BAQEFAASCAl8wggJbAgEAAoGBAPn9JMdR3tiQ3UnK ... HSvsHyEwzpBr -----END PRIVATE KEY-----
"OpenSSH"	Public and Private Keys	An OpenSSH public or private key file. For example, when ExportPrivateKey is False: ssh-rsa AAAAB3NzaC1y... Example when ExportPrivateKey is True: -----BEGIN OPENSSH PRIVATE KEY----- b3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAlwAAAAdzc2gtcnNh ... AwQFBgcICQo= -----END OPENSSH PRIVATE KEY-----
"PPK"	Private Keys	A PuTTY private key file. For example, PuTTY-User-Key-File-2: ssh-rsa Encryption: none Comment: rsa-key-20180822 Public-Lines: 4 AAAAB3NzaC1yc2EAAAADAQABAAAAgQCmz5j5kWUKxfwiv6J0LQ4wN9ekpeORXVaP ... 8pSSWejQ5Q== Private-Lines: 8 AAAAgH87Sp/YcSw1dKoAZuWb0/2dKkKwMRIYEkS15caRpzAteay6WWX7l1sgBTU7 ... Oa0= Private-MAC: d53e24f44bde8d1d3844a142fbb1fa7c88ea3585
"SSH2PublicKey"	Public Keys	An SSH2 public key. For example, ---- BEGIN SSH2 PUBLIC KEY ---- AAAAB3NzaC1yc2EAAAADAQABAAAAgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3y ... 6bVPTODELil1PVWJDlfdwoLZZKY2ACFHzxBqaOlYv1rbd2JIYAuqGca2ow== ---- END SSH2 PUBLIC KEY ----
"SSH2PrivateKey"	Private Keys	An SSH2 private key. For example, ---- BEGIN SSH2 ENCRYPTED PRIVATE KEY ---- AAAAB3NzaC1yc2EAAAADAQABAAAAgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3y ... 6bVPTODELil1PVWJDlfdwoLZZKY2ACFHzxBqaOlYv1rbd2JIYAuqGca2ow== ---- END SSH2 ENCRYPTED PRIVATE KEY ----
"JWK"	Private and Public Keys	A JSON Web Key (JWK). For example, when ExportPrivateKey is False: { "kty": "EC", "crv": "P-256", "x": "M_P_uqzP43FYW-kXWlpEDlX3nPZUr1QaMllAxUnao7w", "y": "zRFhp7iCXYIoTgerQ4LjGPTujodlimrwIMk-3enj_1Q" } For example, when ExportPrivateKey is True: { "kty": "EC", "crv": "P-256", "x": "M_P_uqzP43FYW-kXWlpEDlX3nPZUr1QaMllAxUnao7w", "y": "zRFhp7iCXYIoTgerQ4LjGPTujodlimrwIMk-3enj_1Q", "d": "eFBtl-uaB9Y4b-CIav5IYX4gGRFBvpBmrMOOQ7L-euI" }
"XML"	Private and Public Keys	An XML file holding the key or X509 data. For example, when ExportPrivateKey is False: <X509Data> <X509Certificate>MIIB...D8Lu</X509Certificate> </X509Data> For example, when ExportPrivateKey is True: <RSAKeyValue> <Modulus>+f0k...tqM=</Modulus> <Exponent>AQAB</Exponent> <P>/cOnF...tGw==</P> <Q>/DD5...dGQ==</Q> <DP>d75...N0w==</DP> <DQ>Cyv...rKQ==</DQ> <InverseQ>fsB...Qaw==</InverseQ> <D>J7p...YJE=</D> </RSAKeyValue>

CertMgr.ExportPrivateKey Property

This controls whether to export the private key.

Syntax

isExportPrivateKey(): boolean;
setExportPrivateKey(exportPrivateKey: boolean): void;

Default Value

TRUE

Remarks

This property controls whether the private key is exported when ExportCertificate is called.

If set to True (default), the private key is exported. If set to False, only the public key is exported.

CertMgr.checkCRL Method

This method checks the Certificate Revocation List (CRL) specified by the currently loaded certificate.

Syntax

async certmgr.checkCRL(): Promise<void>

Remarks

This method will check the CRLs specified by the currently loaded Cert.

The class will first obtain the list of CRL URLs from the certificate's CRL distribution points extension. The class will then make HTTP requests to each CRL endpoint to check the validity of the certificate.

If the certificate has been revoked or any other issues are found during validation, the class . To check whether the certificate supports the CRL extension, use the HasCRL configuration setting.

CertMgr.checkOCSP Method

This method uses Online Certificate Status Protocol (OCSP) to check the status of the currently loaded certificate.

Syntax

async certmgr.checkOCSP(): Promise<void>

Remarks

This method will use OCSP to check the validity of the currently loaded Cert.

The class will first obtain the OCSP URL from the certificate's OCSP extension. The class will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the certificate.

If the certificate has been revoked or any other issues are found during validation, the class . To check whether the certificate supports the OCSP extension, use the HasOCSP configuration setting.

CertMgr.config Method

Sets or retrieves a configuration setting.

Syntax

async certmgr.config(configurationString : string): Promise<string>

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CertMgr.createCertificate Method

This method creates a new self-signed certificate in the current store.

Syntax

async certmgr.createCertificate(certSubject : string, serialNumber : number): Promise<void>

Remarks

This method creates a new self-signed certificate in the current store, which contains the following:

CertSubject specifies the subject of the new certificate. A new keyset (public/private key pair) is generated and associated with the new certificate.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

SerialNumber specifies the certificate serial number. All certificates signed by the same issuer must have different (unique) serial numbers.

The time validity of the new certificate is determined by the CertValidityTime configuration setting, and the key size by the CertKeyLength configuration setting.

In the Unix edition of the toolkit, the certificate will be created in memory. Call ExportCertificate to export the newly created certificate to a PEM file.

CertMgr.createKey Method

This method creates a new keyset associated with the provided name.

Syntax

async certmgr.createKey(keyName : string): Promise<void>

Remarks

This method will create a new keyset (public/private key pair) within the Cryptographic Service Provider (CSP) used by the class. The CSP can be set using the CSP configuration setting.

Note: This functionality is only available in Windows.

CertMgr.deleteCertificate Method

This method deletes the currently selected certificate from the store.

Syntax

async certmgr.deleteCertificate(): Promise<void>

Remarks

This method will delete the selected certificate from the store. If the certificate cannot be deleted, an error is returned.

This functionality is currently not available when the provider is OpenSSL.

CertMgr.deleteKey Method

This method deletes the keyset associated with the provided name.

Syntax

async certmgr.deleteKey(keyName : string): Promise<void>

Remarks

This method will delete the keyset (public/private key pair) associated with KeyName from the Cryptographic Service Provider (CSP). The CSP can be set using the CSP configuration setting.

Note: This functionality is only available in Windows.

CertMgr.exportCertificate Method

This method exports the currently selected certificate.

Syntax

async certmgr.exportCertificate(certFile : string, password : string): Promise<void>

Remarks

This method exports the certificate currently selected by CertSubject to the file specified by the CertFile parameter in the format specified by ExportFormat. This method may be used effectively to convert between a variety of formats.

The Password parameter specifies a password for the private key when ExportPrivateKey is set to True. Password is not applicable when ExportPrivateKey is set to False.

If CertFile is set to an empty string, the exported certificate will not be written to disk and instead will be held as a string by the ExportedCert property.


ExportFormat	Applicability	Description
"PFX" or "PKCS12" (default)	Private Keys	A PFX file (PKCS12).
"PEM"	Public and Private Keys	A PEM-formatted public certificate (X509/PKCS1/PKCS8), or PEM formatted private key (PKCS1/PKCS8). When ExportPrivateKey is False the exported certificate will be a PEM formatted X509 public certificate if the certificate being exported includes X509 data. If no X509 information is present, the public key will be exported in PKCS1 public key format for RSA/DSA keys and PKCS8 public key format for ECDSA/EdDSA keys. When ExportPrivateKey is True the exported certificate will be a PEM-formatted PKCS1 private key for RSA/DSA keys and a PEM-formatted PKCS8 private key for ECDSA/EdDSA keys. For example, when ExportPrivateKey is False: -----BEGIN CERTIFICATE----- MIIBkTCB+6ADAgECAgEBMA0GCSqGSIb3DQEBBQUAMA4xDDAKBgNVBAMTAzEwMDAgFw0wNzAx ... Pg49SpQ+HcUibIpum2O0hmnySH7BPGfXD8Lu -----END CERTIFICATE----- Example when ExportPrivateKey is True: -----BEGIN RSA PRIVATE KEY----- MIICWwIBAAKBgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3yaZ98bvry ... 91y8ydb3mQ9l1hZudo2sj8tHnvEgph0r7B8hMM6Qaw== -----END RSA PRIVATE KEY-----
"PKCS1"	Public and Private Keys	A PEM-formatted PKCS1 key file. For example, when ExportPrivateKey is False: -----BEGIN RSA PUBLIC KEY----- MIGJAoGBALAyxV5assz+9v7aHbj93NYN5uGB/1z7kb2Nx4hj02QyRYbcD4htkhK4Qcq2GCsG ... MxW4+pdeN4oEZ6rbMZt01bvMwNRX2GDEyQBhAgMBAAE= -----END RSA PUBLIC KEY----- Example when ExportPrivateKey is True: -----BEGIN RSA PRIVATE KEY----- MIICWwIBAAKBgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3yaZ98bvry ... 91y8ydb3mQ9l1hZudo2sj8tHnvEgph0r7B8hMM6Qaw== -----END RSA PRIVATE KEY-----
"PKCS8"	Public and Private Keys	A PEM-formatted PKCS8 key file. Example when ExportPrivateKey is False: -----BEGIN PUBLIC KEY----- MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCxdTNtpJQbw90cq6aJEx5vRIBrAiCAB9/F ... 8UdUliXeU8UGYjVcMhGy5oPsVeBXGcPAqF2mjXdBKNnzlSlctOLnYRBS5jwRuNfTQQIDAQAB -----END PUBLIC KEY----- Example when ExportPrivateKey is True: -----BEGIN PRIVATE KEY----- MIICdQIBADANBgkqhkiG9w0BAQEFAASCAl8wggJbAgEAAoGBAPn9JMdR3tiQ3UnK ... HSvsHyEwzpBr -----END PRIVATE KEY-----
"OpenSSH"	Public and Private Keys	An OpenSSH public or private key file. For example, when ExportPrivateKey is False: ssh-rsa AAAAB3NzaC1y... Example when ExportPrivateKey is True: -----BEGIN OPENSSH PRIVATE KEY----- b3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAlwAAAAdzc2gtcnNh ... AwQFBgcICQo= -----END OPENSSH PRIVATE KEY-----
"PPK"	Private Keys	A PuTTY private key file. For example, PuTTY-User-Key-File-2: ssh-rsa Encryption: none Comment: rsa-key-20180822 Public-Lines: 4 AAAAB3NzaC1yc2EAAAADAQABAAAAgQCmz5j5kWUKxfwiv6J0LQ4wN9ekpeORXVaP ... 8pSSWejQ5Q== Private-Lines: 8 AAAAgH87Sp/YcSw1dKoAZuWb0/2dKkKwMRIYEkS15caRpzAteay6WWX7l1sgBTU7 ... Oa0= Private-MAC: d53e24f44bde8d1d3844a142fbb1fa7c88ea3585
"SSH2PublicKey"	Public Keys	An SSH2 public key. For example, ---- BEGIN SSH2 PUBLIC KEY ---- AAAAB3NzaC1yc2EAAAADAQABAAAAgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3y ... 6bVPTODELil1PVWJDlfdwoLZZKY2ACFHzxBqaOlYv1rbd2JIYAuqGca2ow== ---- END SSH2 PUBLIC KEY ----
"SSH2PrivateKey"	Private Keys	An SSH2 private key. For example, ---- BEGIN SSH2 ENCRYPTED PRIVATE KEY ---- AAAAB3NzaC1yc2EAAAADAQABAAAAgQD5/STHUd7YkN1JyoyYnUvCf+Fyx1+ZleBJxvwDcm3y ... 6bVPTODELil1PVWJDlfdwoLZZKY2ACFHzxBqaOlYv1rbd2JIYAuqGca2ow== ---- END SSH2 ENCRYPTED PRIVATE KEY ----
"JWK"	Private and Public Keys	A JSON Web Key (JWK). For example, when ExportPrivateKey is False: { "kty": "EC", "crv": "P-256", "x": "M_P_uqzP43FYW-kXWlpEDlX3nPZUr1QaMllAxUnao7w", "y": "zRFhp7iCXYIoTgerQ4LjGPTujodlimrwIMk-3enj_1Q" } For example, when ExportPrivateKey is True: { "kty": "EC", "crv": "P-256", "x": "M_P_uqzP43FYW-kXWlpEDlX3nPZUr1QaMllAxUnao7w", "y": "zRFhp7iCXYIoTgerQ4LjGPTujodlimrwIMk-3enj_1Q", "d": "eFBtl-uaB9Y4b-CIav5IYX4gGRFBvpBmrMOOQ7L-euI" }
"XML"	Private and Public Keys	An XML file holding the key or X509 data. For example, when ExportPrivateKey is False: <X509Data> <X509Certificate>MIIB...D8Lu</X509Certificate> </X509Data> For example, when ExportPrivateKey is True: <RSAKeyValue> <Modulus>+f0k...tqM=</Modulus> <Exponent>AQAB</Exponent> <P>/cOnF...tGw==</P> <Q>/DD5...dGQ==</Q> <DP>d75...N0w==</DP> <DQ>Cyv...rKQ==</DQ> <InverseQ>fsB...Qaw==</InverseQ> <D>J7p...YJE=</D> </RSAKeyValue>

ExportCertificate Example:

//Convert from PFX to PPK certmgr.SetCertStoreType(CST_PFXFILE); certmgr.SetCertStore("..\\test.pfx", strlen("..\\test.pfx")); certmgr.SetCertStorePassword("password"); certmgr.SetCertSubject("*"); certmgr.SetExportPrivateKey(true); certmgr.SetExportFormat("PPK"); int ret_code = certmgr.ExportCertificate("..\\test.ppk", "newpassword"); //Export public certificate from PFX certmgr.SetCertStoreType(CST_PFXFILE); certmgr.SetCertStore("..\\test.pfx", strlen("..\\test.pfx")); certmgr.SetCertStorePassword("password"); certmgr.SetCertSubject("*"); certmgr.SetExportPrivateKey(false); certmgr.SetExportFormat("PEM"); ret_code = certmgr.ExportCertificate("..\\exported.cer", ""); //Convert .cer file to SSH2 Public Key certmgr.SetCertStoreType(CST_PUBLIC_KEY_FILE); certmgr.SetCertStore("..\\exported.cer", strlen("..\\exported.cer")); certmgr.SetCertSubject("*"); certmgr.SetExportPrivateKey(false); certmgr.SetExportFormat("SSH2PublicKey"); ret_code = certmgr.ExportCertificate("C:\\ssh2.pub", "");

CertMgr.generateCSR Method

This method generates a new Certificate Signing Request (CSR) to be sent to a signing authority.

Syntax

async certmgr.generateCSR(certSubject : string, keyName : string): Promise<string>

Remarks

This method will generate a new CSR to be sent to the signing authority. CertSubject specifies the subject of the CSR. KeyName specifies the name of the keyset (public/private key pair) to be used. If the keyset does not already exist in the Cryptographic Service Provider (CSP), the class will automatically generate one. To set the CSP, use the CSP configuration setting.

Note: Remember the name of the keyset that is used when creating a CSR. The keyset must be re-associated with the certificate after the trust authority has signed the CSR.


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

Note: This functionality is only available in Windows.

CertMgr.importCertificate Method

This method imports a certificate from a file into the current certificate store.

Syntax

async certmgr.importCertificate(certFile : string, password : string, subject : string): Promise<void>

Remarks

This method will import a certificate from a file into the current certificate store.

On Windows platforms, certificates may be imported only to the Windows certificate store. To load a certificate without importing it to a Windows store, set Cert.

Certificate files with or without a private key may be imported. If the file specified by CertFile contains a private key, the private key will be imported along with the public certificate. If the file specified by CertFile contains only a public certificate, only the public certificate will be imported.

The Password parameter specifies the certificate password (if any). When importing a public certificate, set Password to an empty string.

The format of the certificate file being imported must contain valid X509 data to be imported. Not all certificate file formats include X509 data, such as PPK or PKCS8 private keys. If the CertFile is of a format that cannot be imported, the class .

Subject is optional. If empty, the first certificate in the store is loaded instead of the matching certificate.

ImportCertificate Example

//Import a PFX certmgr.ImportCertificate("..\\test.pfx", "password", "*"); //Import a public certificate (CER) certmgr.ImportCertificate("..\\test.cer", "", "*");

CertMgr.importSignedCSR Method

This method imports a signed Certificate Signing Request (CSR).

Syntax

async certmgr.importSignedCSR(signedCSR : Uint8Array, keyName : string): Promise<void>

Remarks

This method will import a signed CSR. SignedCSR specifies a certificate that has been signed by a trusted authority. KeyName is the name of the keyset (public/private key pair) that was used to create the original CSR.

Note: This functionality is only available in Windows.

CertMgr.issueCertificate Method

This creates a new certificate in the current store and is signed by the selected certificate.

Syntax

async certmgr.issueCertificate(certSubject : string, serialNumber : number): Promise<void>

Remarks

This method creates a new certificate in the current store and is signed by the selected certificate. CertSubject specifies the subject of the new certificate. A new keyset (public/private key pair) is generated and associated with the new certificate.


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

SerialNumber specifies the certificate serial number. All certificates signed by the same issuer must have different (unique) serial numbers.

The current certificate selected by the class will be used as the issuing certificate.

If no certificate has been selected in the current CertStore before calling this method, or if the selected certificate does not have an associated private key, the method .

The time validity of the new certificate is determined by the CertValidityTime configuration setting, and the key size by the CertKeyLength configuration setting.

Note: This functionality is only available in Windows.

CertMgr.listCertificateStores Method

This lists the certificate stores.

Syntax

async certmgr.listCertificateStores(): Promise<string>

Remarks

This method lists the system certificate stores for the current user account. The results are provided through the StoreList event.

The same information is also returned upon method completion as a set of lines and is given one per certificate store name.

Note: This functionality is only available in Windows.

CertMgr.listKeys Method

This lists the keysets in a Cryptographic Service Provider (CSP).

Syntax

async certmgr.listKeys(): Promise<string>

Remarks

This method lists the keys (public/private key pairs) in a CSP. The results are provided through the KeyList event.

The same information is also returned upon method completion as a set of lines and is given one per key, with each line containing the following information separated by Tab characters: KeyContainer, KeyType, AlgId, and KeyLen.

Note: This functionality is only available in Windows.

CertMgr.listMachineStores Method

This lists the machine certificate stores.

Syntax

async certmgr.listMachineStores(): Promise<string>

Remarks

This method behaves the same as the ListCertificateStores method, but it lists the certificate stores in the machine account (under HKEY_LOCAL_MACHINE in the registry).

Note: This functionality is only available in Windows.

CertMgr.listStoreCertificates Method

This lists the certificates in a store.

Syntax

async certmgr.listStoreCertificates(): Promise<string>

Remarks

This method lists the certificates in a store. The results are provided through the CertList event.

The same information is also returned upon method completion as a set of lines and is given one per certificate, with each line containing the following information separated by Tab characters: CertSubject, CertIssuer, CertSerialNumber, and HasPrivateKey (as "1" or "0").

In the Unix edition of the toolkit, this is available only when a PFX file is loaded.

CertMgr.readCertificate Method

This loads a certificate from a file.

Syntax

async certmgr.readCertificate(fileName : string): Promise<void>

Remarks

Note: This method is present for backward compatibility. It is recommended to specify the Cert property to load a certificate.

This method will load a certificate from a file. The file contents can be encoded in Base64 PEM or ASN DER format.

CertMgr.readCSR Method

This reads a Certificate Signing Request (CSR).

Syntax

async certmgr.readCSR(CSR : string): Promise<string>

Remarks

This method reads a CSR and returns a string holding information about the CSR. The Cert property is also populated with relevant information about the CSR, including the following:

CertSubject
CertPublicKeyLength
CertPublicKeyAlgorithm

The method accepts the CSR parameter as either a Base64-encoded string PEM or a path to a file.

The return value will be in the following format:

Certificate Request:
    Data:
        Version: 0 (0x0)
        Subject: C=AU, S=Some-State, O=Internet Widgits Pty Ltd
        Subject Public Key Info:
            Public Key Algorithm: X957_DSA (1.2.840.10040.4.1)
                Public-Key: (0 bit)
                pub:
                    02:82:01:00:66:70:68:60:08:63:bc:ff:26:62:77:74:
                    f6:b8:a8:11:f4:2c:5d:a1:79:b9:8e:ea:30:2e:6b:5a:
                    1b:35:39:24:91:1b:c1:ba:49:a0:c5:af:47:6e:73:0a:
                    f3:f6:6b:99:94:21:32:e5:24:b3:a8:a4:85:93:84:26:
                    e8:5c:4a:5d:2e:5e:82:df:ab:cc:e5:8d:51:ac:45:c2:
                    09:e5:21:f1:ce:c9:a0:3d:1d:7a:ab:fa:dd:d6:56:a8:
                    b2:61:26:8e:27:83:36:8a:0c:9b:cb:61:1a:b5:63:95:
                    ef:a5:bd:f2:8e:a7:fc:ca:d2:81:87:a5:6a:88:03:2e:
                    ca:fb:24:fa:d0:df:8a:2e:a9:e0:31:fc:57:e1:02:ca:
                    ee:99:01:d2:a5:33:34:47:92:b3:8b:31:f5:f1:1d:bf:
                    eb:07:70:71:6f:d1:c0:4c:0a:9d:99:af:ae:7e:bc:85:
                    e4:d2:22:1c:38:4b:60:e8:31:4d:f7:10:06:10:03:55:
                    f5:af:ba:a9:53:a5:9b:ae:d1:f8:38:34:80:e4:1c:9e:
                    06:8d:cc:39:3e:b2:e9:32:82:85:d2:d0:ed:b2:8e:d6:
                    6f:96:87:08:62:cc:9e:d3:75:76:b5:85:31:c6:a4:94:
                    59:15:ec:de:70:5a:34:2c:ff:27:ad:fc:14:01:e6:39:
                    8a:c9:91:3e:
                P:
                    00:dc:a6:15:cc:1a:e1:44:16:dc:a8:68:a4:18:9a:ab:
                    bf:5d:bf:b7:d1:5e:38:5f:b6:0e:21:ef:df:83:6a:5c:
                    31:f0:c9:07:3c:13:2c:9c:32:d0:89:76:2b:80:ad:3f:
                    6b:5d:5a:1d:69:31:f5:80:d5:65:ba:b5:28:a3:38:ba:
                    93:25:c4:fc:93:99:a2:00:5d:5e:c6:1b:f2:63:f0:24:
                    72:52:b4:49:97:19:93:fe:47:bf:9e:2e:54:d1:8a:b9:
                    09:8d:54:e8:de:31:e8:0d:21:b0:81:b2:f5:bd:38:3c:
                    15:02:d6:c1:aa:ab:17:8f:a8:f8:1f:1b:34:09:85:75:
                    3d:6e:28:2d:72:af:47:fd:ae:c4:f3:78:53:d7:07:a7:
                    c4:72:35:2d:6b:9e:42:08:1d:46:c9:38:d2:53:27:63:
                    a2:1d:be:11:9f:dd:9d:5b:e4:ad:fa:71:30:61:84:60:
                    a0:bf:bd:3a:51:b4:b5:1e:48:26:36:66:9e:52:f9:70:
                    35:e3:38:53:2e:90:ed:9f:0f:9d:67:b9:57:dd:53:e6:
                    ca:92:58:40:6d:15:e4:ae:2e:16:74:33:ed:48:90:15:
                    30:b7:fd:47:58:91:d5:c5:e2:3b:1f:1d:3b:a7:59:40:
                    2e:22:1a:9a:89:1b:31:a2:6f:cf:4c:a1:3b:93:ed:8a:
                    11:
                Q:
                    00:e3:ae:12:04:80:be:0f:d4:78:ef:02:27:26:b3:64:
                    6d:2b:e0:c9:da:15:00:a9:9c:45:6d:e6:44:ef:dd:75:
                    71:
                G:
                    18:fb:52:54:fe:bc:54:9e:17:a9:51:a1:e0:b9:6a:ab:
                    48:0e:06:60:f3:cd:fd:3c:14:9a:a0:35:d1:33:d4:d8:
                    b4:ee:ce:0b:5c:c7:60:24:e8:39:17:d8:75:13:90:44:
                    f5:f6:ef:50:cd:b4:af:66:90:f7:00:13:66:2f:ea:e2:
                    29:39:cd:a4:16:20:df:00:fd:53:6d:02:8b:4f:09:a5:
                    7f:72:7c:28:c8:70:2a:85:49:a1:65:36:66:91:52:e7:
                    14:b1:b8:b9:79:39:a6:d5:f8:b9:cd:ce:af:2d:88:66:
                    b5:d9:bb:9e:60:c8:9e:82:b4:3f:ff:23:37:4b:20:e4:
                    88:b0:d4:6e:b7:b5:8c:e6:98:cb:88:c2:6e:10:46:af:
                    44:0f:53:22:c2:fb:80:d3:30:05:c0:a6:4b:f8:e0:08:
                    3e:69:b6:17:b1:7d:2f:8f:07:66:9c:e5:94:3f:fc:ea:
                    f9:6c:9d:49:7c:91:f3:5a:92:b4:a7:b9:dc:42:7d:1a:
                    b0:99:ad:6d:b8:d9:03:6e:40:13:1c:3e:e2:80:f5:a1:
                    da:75:49:29:be:36:ad:78:74:46:0d:00:e9:6d:bf:8c:
                    65:50:4c:ad:ba:a7:1c:ac:5a:13:9e:d6:6a:3a:9f:cb:
                    1f:7d:5d:e2:3e:79:22:c2:56:c8:70:74:53:9a:4e:6c:
        Attributes:

    Signature Algorithm: 2.16.840.1.101.3.4.3.2 (2.16.840.1.101.3.4.3.2)
        00:30:44:02:20:42:00:86:14:2d:70:71:1b:77:b4:f0:
        ae:32:76:7b:1d:71:98:a2:70:69:4c:a9:e6:c1:9b:ad:
        df:af:a3:30:10:02:20:12:8f:ed:0b:1e:d5:f6:84:24:
        a9:fe:bc:45:75:eb:02:62:13:07:2c:ae:3f:ce:f3:da:
        95:25:47:97:bf:a6:9e:

CertMgr.reset Method

This resets all certificate properties to their default values.

Syntax

async certmgr.reset(): Promise<void>

Remarks

This method will reset all certificate properties to their default values. If a certificate and a private key are selected or a certificate store is opened, both are released upon calling this method.

CertMgr.saveCertificate Method

This method saves the currently selected public certificate to a file.

Syntax

async certmgr.saveCertificate(fileName : string): Promise<void>

Remarks

Note: This method is present for backward compatibility. It is recommended to use ExportCertificate to export both public and private certificates and keys.

This method saves the public certificate of the currently selected certificate in Base64 PEM format to the location specified by the FileName parameter.

If the destination file exists, it is overwritten.

CertMgr.showCertificateChain Method

This shows the certificate chain.

Syntax

async certmgr.showCertificateChain(): Promise<string>

Remarks

This method shows the certificate chain for the certificate. The results are provided through the CertChain event.

Note: This functionality is only available in Windows.

CertMgr.signCSR Method

This creates a signed certificate from a Certificate Signing Request (CSR).

Syntax

async certmgr.signCSR(CSR : Uint8Array, serialNumber : number): Promise<string>

Remarks

This method will create a signed certificate from a CSR. CSR specifies the CSR to be signed.

SerialNumber specifies the certificate serial number. All certificates signed by the same issuer must have different (unique) serial numbers.

The time validity of the new certificate is determined by the CertValidityTime configuration setting, and the key size is determined by the CertKeyLength configuration setting.

Note: This functionality is only available in Windows.

CertMgr.CertChain Event

This event shows the certificate chain for the certificate (see the ShowCertificateChain method).

Syntax

certmgr.on('CertChain', listener: (e: {readonly certEncoded: string, readonly certEncodedB: Uint8Array, readonly certSubject: string, readonly certIssuer: string, readonly certSerialNumber: string, readonly trustStatus: number, readonly trustInfo: number}) => void )

Remarks

This event is fired for every certificate in the certificate chain of the certificate assigned to the class.

The TrustStatus parameter contains information about the trust status of the entire certificate chain. A value of 0 signifies that the security subsystem has verified the certificate. Other values are combinations of one or more of the following flags:


0x00000001	This certificate or one of the certificates in the certificate chain is not time valid.
0x00000002	Certificates in the chain are not properly time nested.
0x00000004	Trust for this certificate or one of the certificates in the certificate chain has been revoked.
0x00000008	This certificate or one of the certificates in the certificate chain does not have a valid signature.
0x00000010	The certificate or the certificate chain is not valid for its proposed usage.
0x00000020	The certificate or certificate chain is based on an untrusted root.
0x00000040	The revocation status of the certificate or one of the certificates in the certificate chain is unknown.
0x00000080	One of the certificates in the chain was issued by a certification authority that the original certificate had certified.
0x00010000	The certificate chain is not complete.
0x00020000	A certificate trust list (CTL) used to create this chain was not time valid.
0x00040000	A CTL used to create this chain did not have a valid signature.
0x00080000	A CTL used to create this chain is not valid for this usage.

The TrustInfo parameter contains additional information about the status of the entire certificate chain. It is a combination of one or more of the following flags:


0x00000001	An exact match issuer certificate has been found for this certificate.
0x00000002	A key match issuer certificate has been found for this certificate.
0x00000004	A name match issuer certificate has been found for this certificate.
0x00000008	This certificate is self-signed.
0x00010000	The certificate chain created is a complex chain.

The CertSubject and CertIssuer parameters contain the distinguished names of the certificate owner and issuer, respectively.

CertMgr.CertList Event

This event lists the certificates in a store (see the ListStoreCertificates method).

Syntax

certmgr.on('CertList', listener: (e: {readonly certEncoded: string, readonly certEncodedB: Uint8Array, readonly certSubject: string, readonly certIssuer: string, readonly certSerialNumber: string, readonly hasPrivateKey: boolean}) => void )

Remarks

The CertSubject and CertIssuer parameters contain distinguished names of the certificate owner and issuer, respectively. The HasPrivateKey flag shows whether the private key for the certificate is available in the system.

The StoreList event and the ListCertificateStores and ListMachineStores methods are used to list the certificate stores in the system.

CertMgr.Error Event

Fired when information is available about errors during data delivery.

Syntax

certmgr.on('Error', listener: (e: {readonly errorCode: number, readonly description: string}) => void )

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class .

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

CertMgr.KeyList Event

This lists the keysets in a Cryptographic Service Provider (CSP); see the ListKeys method.

Syntax

certmgr.on('KeyList', listener: (e: {readonly keyContainer: string, readonly keyType: number, readonly algId: string, readonly keyLen: number}) => void )

Remarks

The KeyContainer parameter is the name used to identify the keyset (public/private key pair) when it was first created.

KeyType shows the key type: 1 for key exchange (encryption) keys, and 2 for digital signature keys.

KeyLen shows the length of the public key (in bits).

CertMgr.Log Event

This event fires once for each log message.

Syntax

certmgr.on('Log', listener: (e: {readonly logLevel: number, readonly message: string, readonly logType: string}) => void )

Remarks

This event fires once for each log message generated by the class. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of message. Possible values are as follows:


0 (None)	No events are logged.
1 (Info - default)	Informational events are logged.
2 (Verbose)	Detailed data are logged.
3 (Debug)	Debug data are logged.

Message is the log entry.

LogType identifies the type of log entry.

CertMgr.StoreList Event

This lists the system certificate stores (see the ListCertificateStores and ListMachineStores methods).

Syntax

certmgr.on('StoreList', listener: (e: {readonly certStore: string}) => void )

Remarks

The CertStore parameter contains the name of the certificate store being listed.

The CertList event and the ListStoreCertificates method are used to list the certificates in the store.

CertExtension Type

This represents an extension for a certificate.

Remarks

A CertExtension represents an extension that adds to or modifies an X509 Certificate. Certificate extensions are defined by their ASN.1 Object-Identifier (). The field contains the raw data of the extension, which is usually ASN.1 encoded.

The following fields are available:

Critical

OID

Value

Fields

Critical
boolean (read-only)
Default Value: False

This property specifies whether or not the extension is defined as critical.

OID
string (read-only)
Default Value: ""

This property contains the ASN.1 Object-Identifier (OID) that defines this certificate extension.

Value
string (read-only)
Default Value: ""

This property contains the raw value of the certificate extension. This value is encoded according to the extension's ASN.1 specification and should contain everything following the OID. The following example is provided for clarity.

The example will

Add a sequence of basicConstraints indicating the holder of this certificate may not act as a CA.
Add a sequence of cRLDistributionPoints showing where to get CRLs.

Certmgr mgr = new Certmgr();
mgr.Cert = new Certificate(CertStoreTypes.cstPFXFile, @"C:\signingcert.pfx", "password", "*");
mgr.CertExtensions.Clear();
mgr.Config("CertUsageFlags=0xA0"); //Key Encipherment and Digital Signature
mgr.Config("CertExtendedKeyUsage=1.3.6.1.5.5.7.3.1,1.3.6.1.5.5.7.3.2"); //Server and Client authentication (respectively)
mgr.Config("CertValidityTime=10000");

Netcode nc = new Netcode();
nc.Format = NetcodeFormats.fmtHex;

// Set basicConstraints to be an end-entity.
// Below is the hex-encoded value broken down.
// 30     // Tag = sequence
// 03     // Length
//   01   // Tag = boolean
//   01   // Length
//     00 // False (not a CA)

// Convert hex string to byte[]
nc.EncodedData = "3003010100";
nc.Decode();

string oid = "2.5.29.19"; // basicConstraints
byte[] value = nc.DecodedDataB;
bool critical = false;
CertExtension basicConstraints = new CertExtension(oid, value, critical);
mgr.CertExtensions.Add(basicConstraints);

// Add one point: http://www.nsoftware.com/dummy/MyCA.crl
// Below is the hex-encoded value broken down.
// 30                    // Tag = sequence
// 2F                    // Length
//   30                  // Tag = DistributionPoint
//   2D                  // Length
//     A0                // Tag = DistributionPointName
//     2B                // Length
//       A0              // Tag = GeneralNames
//       29              // Length
//         86            // Tag = GeneralName
//         27            // Length
//           687474703A2F2F7777772E6E736F6674776172652E636F6D2F64756D6D792F4D7943412E63726C // URL

// Convert hex string to byte[]
nc.EncodedData = "302F302DA02BA0298627687474703A2F2F7777772E6E736F6674776172652E636F6D2F64756D6D792F4D7943412E63726C";
nc.Decode();

oid = "2.5.29.31"; // cRLDistributionPoints
value = nc.DecodedDataB;
critical = false;
CertExtension crlDistributionPoints = new CertExtension(oid, value, critical);
mgr.CertExtensions.Add(crlDistributionPoints);

mgr.IssueCertificate("CN=www.petsbymatilda.com", 123);
Console.WriteLine(mgr.Cert.Encoded);

ValueB
Uint8Array (read-only)
Default Value: ""

The example will

Add a sequence of basicConstraints indicating the holder of this certificate may not act as a CA.
Add a sequence of cRLDistributionPoints showing where to get CRLs.

Certmgr mgr = new Certmgr();
mgr.Cert = new Certificate(CertStoreTypes.cstPFXFile, @"C:\signingcert.pfx", "password", "*");
mgr.CertExtensions.Clear();
mgr.Config("CertUsageFlags=0xA0"); //Key Encipherment and Digital Signature
mgr.Config("CertExtendedKeyUsage=1.3.6.1.5.5.7.3.1,1.3.6.1.5.5.7.3.2"); //Server and Client authentication (respectively)
mgr.Config("CertValidityTime=10000");

Netcode nc = new Netcode();
nc.Format = NetcodeFormats.fmtHex;

// Set basicConstraints to be an end-entity.
// Below is the hex-encoded value broken down.
// 30     // Tag = sequence
// 03     // Length
//   01   // Tag = boolean
//   01   // Length
//     00 // False (not a CA)

// Convert hex string to byte[]
nc.EncodedData = "3003010100";
nc.Decode();

string oid = "2.5.29.19"; // basicConstraints
byte[] value = nc.DecodedDataB;
bool critical = false;
CertExtension basicConstraints = new CertExtension(oid, value, critical);
mgr.CertExtensions.Add(basicConstraints);

// Add one point: http://www.nsoftware.com/dummy/MyCA.crl
// Below is the hex-encoded value broken down.
// 30                    // Tag = sequence
// 2F                    // Length
//   30                  // Tag = DistributionPoint
//   2D                  // Length
//     A0                // Tag = DistributionPointName
//     2B                // Length
//       A0              // Tag = GeneralNames
//       29              // Length
//         86            // Tag = GeneralName
//         27            // Length
//           687474703A2F2F7777772E6E736F6674776172652E636F6D2F64756D6D792F4D7943412E63726C // URL

// Convert hex string to byte[]
nc.EncodedData = "302F302DA02BA0298627687474703A2F2F7777772E6E736F6674776172652E636F6D2F64756D6D792F4D7943412E63726C";
nc.Decode();

oid = "2.5.29.31"; // cRLDistributionPoints
value = nc.DecodedDataB;
critical = false;
CertExtension crlDistributionPoints = new CertExtension(oid, value, critical);
mgr.CertExtensions.Add(crlDistributionPoints);

mgr.IssueCertificate("CN=www.petsbymatilda.com", 123);
Console.WriteLine(mgr.Cert.Encoded);

Constructors

public CertExtension(String OID, byte[] value, boolean critical);

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

The following fields are available:

Fields

EffectiveDate
string (read-only)
Default Value: ""

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

ExpirationDate
string (read-only)
Default Value: ""

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

ExtendedKeyUsage
string (read-only)
Default Value: ""

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

Fingerprint
string (read-only)
Default Value: ""

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

FingerprintSHA1
string (read-only)
Default Value: ""

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

FingerprintSHA256
string (read-only)
Default Value: ""

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

Issuer
string (read-only)
Default Value: ""

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

KeyPassword
string
Default Value: ""

The password for the certificate's private key (if any).

Some certificate stores may individually protect certificates' private keys, separate from the standard protection offered by the . This property can be used to read such password-protected private keys.

Note: This property defaults to the value of . To clear it, you must set the property to the empty string (""). It can be set at any time, but when the private key's password is different from the store's password, then it must be set before calling .

PrivateKey
string (read-only)
Default Value: ""

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The may be available but not exportable. In this case, returns an empty string.

PrivateKeyAvailable
boolean (read-only)
Default Value: False

Whether a is available for the selected certificate. If is True, the certificate may be used for authentication purposes (e.g., server authentication).

PrivateKeyContainer
string (read-only)
Default Value: ""

The name of the container for the certificate (if available). This functionality is available only on Windows platforms.

PublicKey
string (read-only)
Default Value: ""

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

PublicKeyAlgorithm
string (read-only)
Default Value: ""

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

PublicKeyLength
number (read-only)
Default Value: 0

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

SerialNumber
string (read-only)
Default Value: ""

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

SignatureAlgorithm
string (read-only)
Default Value: ""

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

Store
string
Default Value: "MY"

The name of the certificate store for the client certificate.

The property denotes the type of the certificate store specified by . If the store is password-protected, specify the password in .

is used in conjunction with the property to specify client certificates. If has a value, and or is set, a search for a certificate is initiated. Please see the property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

StoreB
Uint8Array
Default Value: "MY"

The name of the certificate store for the client certificate.

The property denotes the type of the certificate store specified by . If the store is password-protected, specify the password in .

is used in conjunction with the property to specify client certificates. If has a value, and or is set, a search for a certificate is initiated. Please see the property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

StorePassword
string
Default Value: ""

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

StoreType
CertStoreTypes
Default Value: 0

The type of certificate store for this certificate.


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: This store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the and set to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

SubjectAltNames
string (read-only)
Default Value: ""

Comma-separated lists of alternative subject names for the certificate.

ThumbprintMD5
string (read-only)
Default Value: ""

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA1
string (read-only)
Default Value: ""

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA256
string (read-only)
Default Value: ""

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

Usage
string (read-only)
Default Value: ""

The text description of .

This value will be one or more of the following strings and will be separated by commas:

Digital Signature
Non-Repudiation
Key Encipherment
Data Encipherment
Key Agreement
Certificate Signing
CRL Signing
Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

UsageFlags
number (read-only)
Default Value: 0

The flags that show intended use for the certificate. The value of is a combination of the following flags:


0x80	Digital Signature
0x40	Non-Repudiation
0x20	Key Encipherment
0x10	Data Encipherment
0x08	Key Agreement
0x04	Certificate Signing
0x02	CRL Signing
0x01	Encipher Only

Please see the property for a text representation of .

This functionality currently is not available when the provider is OpenSSL.

Version
string (read-only)
Default Value: ""

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

Subject
string
Default Value: ""

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

Encoded
string
Default Value: ""

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The and properties also may be used to specify a certificate.

When is set, a search is initiated in the current for the private key of the certificate. If the key is found, is updated to reflect the full subject of the selected certificate; otherwise, is set to an empty string.

EncodedB
Uint8Array
Default Value: ""

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The and properties also may be used to specify a certificate.

Constructors

public Certificate();

Creates a instance whose properties can be set. This is useful for use with when generating new certificates.

public Certificate(String certificateFile);

Opens CertificateFile and reads out the contents as an X.509 public key.

public Certificate(byte[] encoded);

Parses Encoded as an X.509 public key.

public Certificate(int storeType, String store, String storePassword, String subject);

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

public Certificate(int storeType, String store, String storePassword, String subject, String configurationString);

ConfigurationString is a newline-separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CryptoAPI option. The default value is True (the key is persisted). "Thumbprint" - an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to the cstUser , cstMachine , cstPublicKeyFile , and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations.

public Certificate(int storeType, String store, String storePassword, byte[] encoded);

After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

public Certificate(int storeType, byte[] store, String storePassword, String subject);

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a byte array containing the certificate data. StorePassword is the password used to protect the store.

public Certificate(int storeType, byte[] store, String storePassword, String subject, String configurationString);

public Certificate(int storeType, byte[] store, String storePassword, byte[] encoded);

After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

Config Settings (class ipworksmq.certmgr)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

CertMgr Config Settings

BasicConstraints: The hex-encoded value of the certificate's Basic Constraints extension.

This setting specifies the value of this certificate's Basic Constraints extension (as a hex-encoded string). This value is encoded according to the extension's ASN.1 specification. Setting this configuration setting is an alternative to creating a CertExtension object, setting its field, and adding the object to CertExtensions. CertMgr certmgr = new CertMgr(); certmgr.Cert = new Certificate(); certmgr.CertStoreType = CertStoreTypes.cstUser; certmgr.CertStore = "MY"; certmgr.Config("BasicConstraints=30030101FF"); certmgr.CreateCertificate(mySubject, 23);

CertComment: A comment to include in a saved certificate.

This settings specifies the certificate comment when calling ExportCertificate. This setting is applicable only when ExportFormat is set to one of the following values:

OpenSSHKey (ExportPrivateKey must be False)
SSH2PublicKey
PPK

When ExportFormat is set to SSH2PublicKey, the value of this setting must be the full header (e.g., Comment: My Comment).

CertCustomExtensionCount: The number of records in the CertCustomExtension arrays.

This property controls the size of the following arrays:

CertCustomExtensionCritical[i];
CertCustomExtensionOID[i];
CertCustomExtensionValue[i];

The array indices start at 0 and end at CertExtensionCount-1.

CertCustomExtensionCritical[i]: Whether or not the extension is defined as critical.

Whether or not the certificate extension at index "i" is defined as critical.

Valid array indices are from 0 to CertCustomExtensionCount - 1.

CertCustomExtensionOID[i]: The ASN of the extension at index 'i'.

The ASN.1 object identifier (OID) that defines the certificate extension at index 'i'.

Valid array indices are from 0 to CertCustomExtensionCount - 1.

CertCustomExtensionValue[i]: The raw value of the extension at index 'i'.

The raw value of this certificate extension (as a byte string). This value is encoded according to the extension's ASN.1 specification.

Valid array indices are from 0 to CertCustomExtensionCount - 1.

CertExtendedKeyUsage: The extended key usage of the certificate.

This setting specifies the extended key usage flags of the certificate created by calling CreateCertificate or IssueCertificate. If specified, the value is a comma-separated list of OIDs. Common OIDs are as follows:


1.3.6.1.5.5.7.3.1	Server Authentication
1.3.6.1.5.5.7.3.2	Client Authentication
1.3.6.1.5.5.7.3.3	Code Signing
1.3.6.1.5.5.7.3.4	Secure Email
1.3.6.1.5.5.7.3.8	Time Stamping
1.3.6.1.5.5.7.3.9	OCSP Signing

For instance, the following value specified the extended key usage for Server Authentication, Client Authentication, and Code Signing: 1.3.6.1.5.5.7.3.1, 1.3.6.1.5.5.7.3.2, and 1.3.6.1.5.5.7.3.3

CertKeyLength: The public key length for created certificates and keys.

When CreateCertificate creates a new certificate and associated key, or when CreateKey creates a key, this setting determines the length of the new public key (in bits). The default value is 2048.

CertKeyType: The types of keys created for new certificates.

When CreateCertificate creates a new certificate and associated key, or when CreateKey creates a key, this setting determines the type of key generated: 1 for key exchange (encryption) keys, and 2 for digital signature keys. The default value is 1.

CertPublicKeyAlgorithm: The public key algorithm used when a certificate is created.

When CreateCertificate creates a new certificate and associated key, this setting determines the public key algorithm of the generated keys. Following are the valid values:

RSA (default)
DSA
ECDSA_P256
ECDSA_P384
ECDSA_P521
ECDSA_Secp256k1
ECDSA_Secp224k1
ECDSA_Secp192k1
ECDSA_Secp160k1
ECDSA_BRAINPOOLP160R1
ECDSA_BRAINPOOLP192R1
ECDSA_BRAINPOOLP224R1
ECDSA_BRAINPOOLP256R1
ECDSA_BRAINPOOLP320R1
ECDSA_BRAINPOOLP384R1
ECDSA_BRAINPOOLP512R1
ECDSA_BRAINPOOLP160T1
ECDSA_BRAINPOOLP192T1
ECDSA_BRAINPOOLP224T1
ECDSA_BRAINPOOLP256T1
ECDSA_BRAINPOOLP320T1
ECDSA_BRAINPOOLP384T1
ECDSA_BRAINPOOLP512T1
Ed25519
Ed448

CertSignatureAlgorithm: The signature algorithm used when creating certificates.

When CreateCertificate or IssueCertificate creates a new certificate, the signature algorithm used is specified by this setting. Following are the possible values:

MD2
MD5
SHA1
SHA256 (default)
SHA384
SHA512

CertSubjectAltNames: Subject Alternative Names for creating or issuing certificates.

This allows the Subject Alternative Names extension to be specified when creating or issuing a certificate via CreateCertificate or IssueCertificate. This setting only supports email, DNS, URI, and IPv4 addresses. Separate alternative names should be separated by commas. For example:

string altNames = "email:copy,dns:domain.com,dns.1:other.domain.com,uri:http://www.domain.com,ip:192.168.1.102"

CertThumbprint: The thumbprint of the certificate to be loaded.

This setting specifies the thumbprint of the certificate to be loaded. If specified, the supplied thumbprint will be used when identifying the certificate that should be loaded.

This configuration setting is not supported in the C# and Java editions, which already support loading by thumbprint via the Certificate type constructors. This setting is only supported on Windows operating systems. CertMgr cert; cert.Config("CertThumbprint=967adafd7add8f72ee4894ede866d6745970f82f"); cert.SetCertStore("MY", 2); cert.SetCertStoreType(CST_USER); cert.SetCertStorePassword(""); cert.SetCertSubject("TestCert");

CertUsageFlags: Sets the flags indicating the usage of the created certificate.

This setting specifies the usage flags of the certificate created by calling CreateCertificate or IssueCertificate. If specified, the value is the binary OR of one or more of the supported values. For instance, a value of 12 or 0xC is the binary OR of the Certificate Signing and Key Agreement usage flags. The following flags are supported:


0x80	Digital Signature
0x40	Non-Repudiation
0x20	Key Encipherment
0x10	Data Encipherment
0x08	Key Agreement
0x04	Certificate Signing
0x02	CRL Signing
0x01	Encipher Only

CertValidityOffset: The number of days until the certificate becomes valid.

This configuration setting can be used to change when a newly created certificate becomes valid. By default, the certificate is valid as soon as it is created. Set CertValidityOffset to the number of days that this starting period should be offset from the current day. This setting also accepts negative values for back-dating the validity of a certificate. The default value is 0.

CertValidityTime: The validity period for the certificate.

This configuration setting determines the duration in days that a newly created certificate remains valid. The certificate becomes valid as soon as it is created, unless CertValidityOffset is set. The duration is not changed if CertValidityOffset is set; the certificate will still expire CertValidityTime days after the validity period begins. The default value is 365 days.

CreatedKey: The PKCS8 formatted private and public key pair created after calling CreateKey.

This setting returns the PKCS8 formatted private and public key pair of the key created when CreateKey is called. This is useful in scenarios where exporting the key for use in another environment is required.

CSP: The Cryptographic Service Provider.

The name of the Cryptographic Service Provider used to provide access to certificate signing operations.

CSRIgnoredExtensions: Extensions to be ignorned when signing a CSR.

Set this configuration setting to a comma separated list of OID's of any extensions already present in the CSR that should be ignored when the CSR is signed.

For example if the SAN's in a CSR should be ignored the below code would work: CertMgr1->Config("CSRIgnoredExtensions=2.5.29.17");

CSRKey: The PKCS8 formatted private key to use when generating a CSR.

This setting optionally specifies a PKCS8 formatted private key to use when calling GenerateCSR. When set, the keyName parameter of GenerateCSR is ignored and the key specified by this setting is used instead.

EncodeExportedCert: Whether the certificate being exported to a string is encoded.

This setting controls whether the certificate exported as a string when ExportCertificate is called is encoded. If ExportFormat is set to PFX or P7B before calling ExportCertificate the exported certificate may be binary (EncodeExportedCert is False), or base64 encoded (EncodeExportedCert is True) to allow easier handling of the certificate data.

The default value is False.

ImportCertAction: Specified the action to take if a matching certificate or a link to a matching certificate already exists.

When calling ImportCertificate if a matching certificate or a link to a matching certificate already exists in the Windows certificate store this setting governs what action will be taken. Possible values are:


1	CERT_STORE_ADD_NEW - Imports a certificate only if no existing certificate is present.
2	CERT_STORE_ADD_USE_EXISTING - If an existing certificate is found, it is not replaced.
3 (default)	CERT_STORE_ADD_REPLACE_EXISTING - If an existing certificate is found it is replaced.
4	CERT_STORE_ADD_ALWAYS - No checks are performed and a new certificate is always added to the store. This can result in duplicates.
5	CERT_STORE_ADD_REPLACE_EXISTING_INHERIT_PROPERTIES - If an existing certificate is found it is replaced, and the new certificate inherits properties from the certificate it replaces.
6	CERT_STORE_ADD_NEWER - Imports a certificate only if the certificate is newer than an existing matching certificate.
7	CERT_STORE_ADD_NEWER_INHERIT_PROPERTIES - Imports a certificate only if the certificate is newer than an existing matching certificate, and inherits the properties of old certificate it replaces.

ImportCertStoreType: The type of certificate store being specified for import.

When calling ImportCertificate, this setting controls the type of the certificate being specified in the first parameter.

This config can take one of the following values:


2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or base64-encoded) representing a certificate store in PFX (PKCS12) format.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or base64-encoded) that contains an SSH-style public key.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
99 (cstAuto - default)	The certificate type is automatically determined from the input.

Note that this functionality is currently for Windows platforms only.

JWKAlgorithm: The JWK algorithm.

This setting specifies the JWK algorithm. It can be set before calling ExportCertificate (if ExportFormat is set to JWK) to control the key algorithm used to create the JWK. This setting will also be populated after loading a JWK file.

Valid values are:

(empty string)
HS256
HS384
HS512
RS256
RS384
RS512
EC256
EC384
EC512
EC256K

JWKExportX5C: Whether to export a certificate chain to the x5c parameter.

When set to true, the component will attempt to build the X.509 certificate chain for the certificate currently selected by CertSubject. If successful, the x5c parameter will be added to the JWK. It can be set before calling ExportCertificate (if ExportFormat is set to JWK).

The default value is False.

JWKKeyId: The JWK key Id.

This setting specifies the JWK key Id. It can be set before calling ExportCertificate (if ExportFormat is set to JWK). This setting will also be populated after loading a JWK file.

JWKKeyOps: The JWK intended key operations list.

This setting specifies the intended key operations for the JWK. It can be set before calling ExportCertificate (if ExportFormat is set to JWK). This setting will also be populated after loading a JWK file.

This setting format is a JSON array. Examples: ["sign","verify"] or ["encrypt"].

JWKUse: The JWK use parameter value.

This setting specifies the intended usage of the key. It can be set before calling ExportCertificate (if ExportFormat is set to JWK). This setting will also be populated after loading a JWK file.

Valid values are enc and sig.

KeyFormat: How the public and private key are formatted.

This setting controls the format of CertPublicKey and CertPrivateKey. By default these properties hold PEM formatted public and private key data. When set to 1 (XML) the keys are stored in a XML format. This only affects the values returned by the class; the actual keys remain the same regardless of this setting. Possible values are:

0 (PEM - default)
1 (XML)

The default value is 0 (PEM).

KSP: The Key Storage Provider.

The name of the Key Storage Provider used to store and create keys. By default, the value is Microsoft Software Key Storage Provider. To use the Trusted Platform Module (TPM), set this value to Microsoft Platform Crypto Provider.

LogLevel: The level of detail that is logged.

This setting controls the level of detail that is logged through the Log event. Possible values are:


0 (None)	No events are logged.
1 (Info - default)	Informational events are logged.
2 (Verbose)	Detailed data are logged.
3 (Debug)	Debug data are logged.

PFXCertEncryptionAlgorithm: Certificate encryption algorithm used when exporting to PFX format.

This setting specifies the algorithm used to encrypt the certificate when calling ExportCertificate, and is applicable only when ExportFormat is set to PFX or PKCS12.

This setting takes one of the following values (either the OID or friendly name can be used):


2.16.840.1.101.3.4.1.42	PBES2-AES-256-CBC (default)
2.16.840.1.101.3.4.1.2	PBES2-AES-128-CBC
1.2.840.113549.3.7	PBES2-DES-EDE3-CBC
1.2.840.113549.1.12.1.1	PBES1-RC4-128
1.2.840.113549.1.12.1.2	PBES1-RC4-40
1.2.840.113549.1.12.1.3	PBES1-3-KeyTripleDES-CBC
1.2.840.113549.1.12.1.4	PBES1-2-KeyTripleDES-CBC
1.2.840.113549.1.12.1.5	PBES1-RC2-128-CBC
1.2.840.113549.1.12.1.6	PBES1-RC2-40-CBC

PFXKeyEncryptionAlgorithm: Private key encryption algorithm used when exporting to PFX format.

This setting specifies the algorithm used to encrypt the private key when calling ExportCertificate, and is applicable only when ExportFormat is set to PFX or PKCS12.

This setting takes one of the following values (either the OID or friendly name can be used):


2.16.840.1.101.3.4.1.42	PBES2-AES-256-CBC (default)
2.16.840.1.101.3.4.1.2	PBES2-AES-128-CBC
1.2.840.113549.3.7	PBES2-DES-EDE3-CBC
1.2.840.113549.1.12.1.1	PBES1-RC4-128
1.2.840.113549.1.12.1.2	PBES1-RC4-40
1.2.840.113549.1.12.1.3	PBES1-3-KeyTripleDES-CBC
1.2.840.113549.1.12.1.4	PBES1-2-KeyTripleDES-CBC
1.2.840.113549.1.12.1.5	PBES1-RC2-128-CBC
1.2.840.113549.1.12.1.6	PBES1-RC2-40-CBC

ReplaceKey: Whether or not to replace an existing key when creating a new key.

If this is false (default), the component will throw an error if a duplicate key exists while generating a new keyset using CreateKey. If set to true, the component will replace a key if it already exists when generating new keys.

RequestSubjectAltNames: Subject Alternative Names for a Certificate Signing Request.

This allows Subject Alternative Names to be added to a Certificate Signing request. The setting only supports email, DNS, URI, and IPv4 addresses. Separate alternative names should be separated by commas. For example:

string altNames = "email:copy,dns:domain.com,dns.1:other.domain.com,uri:http://www.domain.com,ip:192.168.1.102"

TPMMigrationPassword: The password for the certificate or key.

This setting must be set before calling CreateKey, CreateCertificate, and ImportCertificate methods. The default value is an empty string. If this config is set, the private key in TPM can be exported via the ExportCertificate method with the correct password later. If the config is not set, the private key in TPM can never be exported from TPM. Below is a brief code example of how to use this configuration setting for importing and exporting certificates. // Initialize CertMgr component Certmgr certmgr = new Certmgr(); certmgr.Config("UseInternalSecurityAPI=false"); // Specify TPM integration parameters certmgr.CertStoreType = CertStoreTypes.cstUser; certmgr.CertStore = "MY"; certmgr.Config("KSP=Microsoft Platform Crypto Provider"); // Import a certificate into the TPM certmgr.ImportCertificate("path/to/certificate.pem", "password", "subject"); // Initialize CertMgr component Certmgr certmgr = new Certmgr(); certmgr.Config("UseInternalSecurityAPI=false"); // Specify TPM integration parameters certmgr.CertStoreType = CertStoreTypes.cstUser; certmgr.CertStore = "MY"; certmgr.Config("KSP=Microsoft Platform Crypto Provider"); certmgr.Config("TPMMigrationPassword=password"); certmgr.ExportPrivateKey = true; // Create a certificate object certmgr.Cert = new Certificate(CertStoreTypes.cstUser, "MY", "", rsaSubject); // Export the certificate certmgr.ExportCertificate("../path/to/cert", "password");

X509Algorithm: Public Key Algorithm OID.

This setting exposes the Public Key Algorithm object identifier (OID) value for the currently loaded Cert.

X509SignatureAlgorithm: Signature Algorithm OID.

This setting exposes the Signature Algorithm object identifier (OID) value for the currently loaded Cert.

Trappable Errors (class ipworksmq.certmgr)

CertMgr Errors

143	Busy executing current method.
144	No certificate selected.
221	Cannot acquire CSP.
222	Cannot generate key.
270	Cannot load specified security library.
271	Cannot open certificate store.
272	Cannot find specified certificate.
274	Cannot get certificate chain.
275	Cannot verify certificate chain.
279	Error enumerating certificate stores.
280	The certificate could not be decoded.
281	Cannot find security provider.
282	Cannot add certificate to store.
283	The certificate could not be encoded.
285	Cannot create certificate signing request.
286	Cannot acquire Issuer private key.
287	Cannot delete certificate.
288	Cannot export certificate.