SevenZip Class

Properties   Methods   Events   Config Settings   Errors  

The SevenZip class implements a 7zip-compatible compressor and decompressor.

Syntax

SevenZip

Remarks

To create a new archive, first set the ArchiveFile property to the name of the archive to be created. Then, specify the files to be compressed either by invoking IncludeFiles, or by adding a new object to the Files collection and setting the values of the DecompressedName and CompressedName. fields. Finally, call the Compress method to create the archive.

To decompress an existing archive, set ArchiveFile to the name of the archive to be decompressed. The ExtractToPath property may be set, and then calling the ExtractAll method will decompress all files in the archive to this path.

For finer control, the Scan method should be used to read the file information stored in the archive. This will fill out the information in the Files collection. The values of DecompressedName may then be changed if desired. Finally, ExtractAll may be used to decompress the entire archive, or Extract may be used for finer control.

Data may be streamed out by setting WriteToProgressEvent to true. Then, the Progress event may be trapped to retrieve the data.

Example (Creating an Archive)

ZipControl.ArchiveFile = "c:\test.zip" ZipControl.RecurseSubdirectories = true ZipControl.IncludeFiles("c:\foo\*") ZipControl.Compress()

Example (Extracting from an Archive)

ZipControl.ArchiveFile = "c:\temp.zip" ZipControl.ExtractToPath = "c:\extracted\" ZipControl.ExtractAll()

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

ArchiveFile Property (SevenZip Class)

The name of the zip, gzip, tar, or jar archive.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetArchiveFile();
int SetArchiveFile(const char* lpszArchiveFile);

Unicode (Windows)
LPWSTR GetArchiveFile();
INT SetArchiveFile(LPCWSTR lpszArchiveFile);

char* ipworkszip_sevenzip_getarchivefile(void* lpObj);
int ipworkszip_sevenzip_setarchivefile(void* lpObj, const char* lpszArchiveFile);

QString GetArchiveFile();
int SetArchiveFile(QString qsArchiveFile);

Default Value

""

Remarks

This property specifies the name of the archive to be read or written. This property is required when extracting files.

When Scan, Extract, or ExtractAll is invoked, the file specified by ArchiveFile will be opened for read. If the file does not exist, a trappable error will be generated.

When Compress is called, the file named by ArchiveFile will be written; if a file of this name already exists the Overwrite event will be fired. If ArchiveFile is set to the empty string (""), the archive will not be written to disk, and will be provided only through the Progress event.

The filename may be specified with or without a path. Paths may be relative or absolute, and should be specified in the format native to the host operating system. The filename should be specified with the appropriate extension (such as "zip"); an extension will not automatically be appended by the class.

If the file cannot be read, or written, as appropriate, a trappable error will be generated.

Example (Creating an Archive)

ZipControl.ArchiveFile = "c:\test.zip" ZipControl.RecurseSubdirectories = true ZipControl.IncludeFiles("c:\foo\*") ZipControl.Compress()

Note: an archive already open for read may be closed by setting ArchiveFile to the empty string ("").

Data Type

String

CompressionLevel Property (SevenZip Class)

The compression level to use.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int GetCompressionLevel();
int SetCompressionLevel(int iCompressionLevel);

Unicode (Windows)
INT GetCompressionLevel();
INT SetCompressionLevel(INT iCompressionLevel);

int ipworkszip_sevenzip_getcompressionlevel(void* lpObj);
int ipworkszip_sevenzip_setcompressionlevel(void* lpObj, int iCompressionLevel);

int GetCompressionLevel();
int SetCompressionLevel(int iCompressionLevel);

Default Value

3

Remarks

This property is only applicable when using the LZMA CompressionMethod. This property specifies the level of compression to be used,valid values are: 1, 2, 3, 4 and 5. Higher values will cause the class to compress better; lower values will cause the class to compress faster. The default value is 3.

You may optionally set this property from within the BeginFile event to apply different levels of compression to different files.

Data Type

Integer

CompressionMethod Property (SevenZip Class)

Used to set the method of compression.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int GetCompressionMethod();
int SetCompressionMethod(int iCompressionMethod);

Unicode (Windows)
INT GetCompressionMethod();
INT SetCompressionMethod(INT iCompressionMethod);

CMSZ_LZMA(0), 
CMSZ_BZIP_2(1), 
CMSZ_DELTA(2), 
CMSZ_COPY(3), 
CMSZ_DEFLATE(4), 
CMSZ_LZMA_2(5)

int ipworkszip_sevenzip_getcompressionmethod(void* lpObj);
int ipworkszip_sevenzip_setcompressionmethod(void* lpObj, int iCompressionMethod);

int GetCompressionMethod();
int SetCompressionMethod(int iCompressionMethod);

Default Value

0

Remarks

This is used to specify different compression methods. By default the class uses the LZMA compression method (a value of 0). Supported values are:

Data Type

Integer

ExcludedFiles Property (SevenZip Class)

A list of files to exclude.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetExcludedFiles();
int SetExcludedFiles(const char* lpszExcludedFiles);

Unicode (Windows)
LPWSTR GetExcludedFiles();
INT SetExcludedFiles(LPCWSTR lpszExcludedFiles);

char* ipworkszip_sevenzip_getexcludedfiles(void* lpObj);
int ipworkszip_sevenzip_setexcludedfiles(void* lpObj, const char* lpszExcludedFiles);

QString GetExcludedFiles();
int SetExcludedFiles(QString qsExcludedFiles);

Default Value

""

Remarks

This property specifies files that should be excluded when Compress or Extract is invoked. When Compress is invoked, each value of DecompressedName in Files will be compared to ExcludedFiles, and each file will be excluded if the name matches. When Extract is called, each value of CompressedName in Files matching the parameter to Extract will be compared to ExcludedFiles, and will be excluded if appropriate. Calling the ExtractAll method will ignore this property and extract all files in the archive.

This property may be set to one or more filenames or directory names. Files may be specified with or without a path, and with or without wildcards. If a path is specified, files in the indicated directory will be excluded; subdirectories will be recursed into if RecurseSubdirectories is true. If no path is specified but wildcards are, matching files in all directories will be excluded. If a single filename without a path is specified, it must correspond exactly to the appropriate value of CompressedName or DecompressedName.

Directories should end with a slash ("/" or "\", as appropriate.) If a directory is specified, all files and subdirectories in the specified directory will be excluded.

A pipe character ("|") should be used to separate multiple file or directory names.

The following examples illustrate the use of the property:

Example

ZipControl.ArchiveFile = "c:\test.zip" ZipControl.IncludeFiles("c:\test\*") ZipControl.ExcludedFiles = "*.tmp" ZipControl.Compress() Example

ZipControl.ArchiveFile = "c:\test.tar" ZipControl.Scan() ZipControl.ExcludedFiles = "*.bak | backup/" ZipControl.ExtractToPath = "c:\temp" ZipControl.Extract("*") As per the examples, the property should be specified differently for compression and decompression. When invoking Compress, the format of ExcludedFiles should correspond to that of the local file system. When invoking Extract the format should correspond to standard (UNIX) format, and should not contain drive letters or backslashes.

You may exclude files based on their attributes as well: See the ExcludedAttributes configuration setting for more information.

If the property is set to the empty string, no files will be excluded. This property is never reset automatically, so be sure to reset it manually if using a single instance of the class for both compression and extraction. Failure to do so may result in I/O errors or unexpected results.

Data Type

String

ExtractToPath Property (SevenZip Class)

A base path to decompress to.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetExtractToPath();
int SetExtractToPath(const char* lpszExtractToPath);

Unicode (Windows)
LPWSTR GetExtractToPath();
INT SetExtractToPath(LPCWSTR lpszExtractToPath);

char* ipworkszip_sevenzip_getextracttopath(void* lpObj);
int ipworkszip_sevenzip_setextracttopath(void* lpObj, const char* lpszExtractToPath);

QString GetExtractToPath();
int SetExtractToPath(QString qsExtractToPath);

Default Value

""

Remarks

Setting the ExtractToPath property affects the operation of the Extract and ExtractAll methods. Setting this property to a nonempty string will cause all decompressed files to be written to the specified path. If pathnames are given in the values of DecompressedName they will be regarded as relative to ExtractToPath.

If the specified directory does not exist, it will be created when extraction is done.

ExtractToPath should always be specified in the format native to the host operating system, and with a trailing slash or backslash. If the path is specified otherwise, it will be immediately converted and stored in the converted format. For example, "/temp" would be immediately converted to "\temp\" on a Windows system.

Example (Extracting from an Archive)

ZipControl.ArchiveFile = "c:\temp.zip" ZipControl.ExtractToPath = "c:\extracted\" ZipControl.ExtractAll()

Example - Adding Files Dim i as Integer ZipControl.ArchiveFile = "c:\test.zip" ZipControl.Scan() For i = 0 to ZipControl.Files.Count - 1 ZipControl.Files(i).DecompressedName(i) = "c:\temp\" + ZipControl.Files(i).DecompressedName Next i ZipControl.ExtractToPath = "" ZipControl.ExtractAll() ZipControl.IncludeFiles("c:\extra\*") ZipControl.Compress()

Data Type

String

Files Property (SevenZip Class)

Collection of SevenZip archive files.

Syntax

• C++
• C
• Qt

IPWorksZipList<IPWorksZipSevenZipFile>* GetFiles();
int SetFiles(IPWorksZipList<IPWorksZipSevenZipFile>* val);

int ipworkszip_sevenzip_getfilecount(void* lpObj);
int ipworkszip_sevenzip_setfilecount(void* lpObj, int iFileCount);

int ipworkszip_sevenzip_getfileattributes(void* lpObj, int fileindex);
int ipworkszip_sevenzip_setfileattributes(void* lpObj, int fileindex, int iFileAttributes);

int64 ipworkszip_sevenzip_getfilecompresseddate(void* lpObj, int fileindex);
int ipworkszip_sevenzip_setfilecompresseddate(void* lpObj, int fileindex, int64 lFileCompressedDate);

char* ipworkszip_sevenzip_getfilecompressedname(void* lpObj, int fileindex);
int ipworkszip_sevenzip_setfilecompressedname(void* lpObj, int fileindex, const char* lpszFileCompressedName);

int64 ipworkszip_sevenzip_getfilecompressedsize(void* lpObj, int fileindex);

int ipworkszip_sevenzip_getfilecompressionlevel(void* lpObj, int fileindex);
int ipworkszip_sevenzip_setfilecompressionlevel(void* lpObj, int fileindex, int iFileCompressionLevel);

int ipworkszip_sevenzip_getfilecompressionmethod(void* lpObj, int fileindex);
int ipworkszip_sevenzip_setfilecompressionmethod(void* lpObj, int fileindex, int iFileCompressionMethod);

int64 ipworkszip_sevenzip_getfilecrc(void* lpObj, int fileindex);

char* ipworkszip_sevenzip_getfiledecompressedname(void* lpObj, int fileindex);
int ipworkszip_sevenzip_setfiledecompressedname(void* lpObj, int fileindex, const char* lpszFileDecompressedName);

int64 ipworkszip_sevenzip_getfiledecompressedsize(void* lpObj, int fileindex);

int ipworkszip_sevenzip_getfileinputdata(void* lpObj, int fileindex, char** lpFileInputData, int* lenFileInputData);
int ipworkszip_sevenzip_setfileinputdata(void* lpObj, int fileindex, const char* lpFileInputData, int lenFileInputData);

int ipworkszip_sevenzip_setfileinputstream(void* lpObj, int fileindex, IPWorksZipStream* sFileInputStream);

int GetFileCount();
int SetFileCount(int iFileCount);

int GetFileAttributes(int iFileIndex);
int SetFileAttributes(int iFileIndex, int iFileAttributes);

qint64 GetFileCompressedDate(int iFileIndex);
int SetFileCompressedDate(int iFileIndex, qint64 lFileCompressedDate);

QString GetFileCompressedName(int iFileIndex);
int SetFileCompressedName(int iFileIndex, QString qsFileCompressedName);

qint64 GetFileCompressedSize(int iFileIndex);

int GetFileCompressionLevel(int iFileIndex);
int SetFileCompressionLevel(int iFileIndex, int iFileCompressionLevel);

int GetFileCompressionMethod(int iFileIndex);
int SetFileCompressionMethod(int iFileIndex, int iFileCompressionMethod);

qint64 GetFileCRC(int iFileIndex);

QString GetFileDecompressedName(int iFileIndex);
int SetFileDecompressedName(int iFileIndex, QString qsFileDecompressedName);

qint64 GetFileDecompressedSize(int iFileIndex);

QByteArray GetFileInputData(int iFileIndex);
int SetFileInputData(int iFileIndex, QByteArray qbaFileInputData);

int SetFileInputStream(int iFileIndex, IPWorksZipStream* sFileInputStream);

Remarks

When a compressed archive is scanned or decompressed, the values of this collection are populated accordingly.

When creating a compressed archive, this property may be used to set the files to be stored. For each entry added to the collection, the DecompressedName field should be set to the name of the file to be decompressed, and the CompressedName field should be set to the filename to store in the archive.

Archives may also be created using the IncludeFiles method. Invoking the IncludeFiles method causes the values of this collection to be filled out. These values may then be changed directly if desired.

Data Type

IPWorksZipSevenZipFile

OverwriteFiles Property (SevenZip Class)

Whether or not to overwrite files.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int GetOverwriteFiles();
int SetOverwriteFiles(int bOverwriteFiles);

Unicode (Windows)
BOOL GetOverwriteFiles();
INT SetOverwriteFiles(BOOL bOverwriteFiles);

int ipworkszip_sevenzip_getoverwritefiles(void* lpObj);
int ipworkszip_sevenzip_setoverwritefiles(void* lpObj, int bOverwriteFiles);

bool GetOverwriteFiles();
int SetOverwriteFiles(bool bOverwriteFiles);

Default Value

TRUE

Remarks

If this property is set to true, existing files will be overwritten when decompressing. When Extract or ExtractAll is called, each file specified in Files will be checked for existence. If a file exists, the Overwrite event will be fired, and the files will be overwritten if OverwriteFiles is set to true.

More precise control of which files should be overwritten may be gained by listening to the Overwrite event and altering its parameters when the event is fired.

This property only affects the operation of Extract and ExtractAll. When compressing files, ArchiveFile will always be overwritten unless the user specifies otherwise in the Overwrite event.

Data Type

Boolean

Password Property (SevenZip Class)

A password for the zip archive.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* GetPassword();
int SetPassword(const char* lpszPassword);

Unicode (Windows)
LPWSTR GetPassword();
INT SetPassword(LPCWSTR lpszPassword);

char* ipworkszip_sevenzip_getpassword(void* lpObj);
int ipworkszip_sevenzip_setpassword(void* lpObj, const char* lpszPassword);

QString GetPassword();
int SetPassword(QString qsPassword);

Default Value

""

Remarks

This property specifies the case-sensitive password used to encrypt or decrypt the archive. If set to an empty string, no password is used.

In this release, streaming out of encrypted archives is not supported. When compressing, WriteToProgressEvent must be set to false if Password is set.

Example (Compressing an Archive)

ZipControl.ArchiveFile = "c:\test.zip" ZipControl.RecurseSubdirectories = true ZipControl.IncludeFiles("c:\foo\*") ZipControl.Password = "nsoftware" ZipControl.Compress()

Data Type

String

RecurseSubdirectories Property (SevenZip Class)

Whether or not to recurse into subdirectories.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int GetRecurseSubdirectories();
int SetRecurseSubdirectories(int bRecurseSubdirectories);

Unicode (Windows)
BOOL GetRecurseSubdirectories();
INT SetRecurseSubdirectories(BOOL bRecurseSubdirectories);

int ipworkszip_sevenzip_getrecursesubdirectories(void* lpObj);
int ipworkszip_sevenzip_setrecursesubdirectories(void* lpObj, int bRecurseSubdirectories);

bool GetRecurseSubdirectories();
int SetRecurseSubdirectories(bool bRecurseSubdirectories);

Default Value

TRUE

Remarks

This property affects the behavior of IncludeFiles and Extract and the meaning of ExcludedFiles. If this property is set to true, IncludeFiles will recurse into all subdirectories whenever it performs a search on the file system.

Be sure RecurseSubdirectories is set to the appropriate value before invoking IncludeFiles, Extract, or Compress; changing the value of this property after method calls will not retroactively alter their effects.

Example (Creating an Archive)

ZipControl.ArchiveFile = "c:\test.zip" ZipControl.RecurseSubdirectories = true ZipControl.IncludeFiles("c:\foo\*") ZipControl.Compress()

Data Type

Boolean

SevenZipData Property (SevenZip Class)

(Decompression only) The seven zip file contents as a byte array.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int SetSevenZipData(const char* lpSevenZipData, int lenSevenZipData);

Unicode (Windows)
INT SetSevenZipData(LPCSTR lpSevenZipData, INT lenSevenZipData);

int ipworkszip_sevenzip_setsevenzipdata(void* lpObj, const char* lpSevenZipData, int lenSevenZipData);

int SetSevenZipData(QByteArray qbaSevenZipData);

Default Value

""

Remarks

Normally you should set ArchiveFile before invoking Scan or Extract. If you prefer to read the zip file from memory you may set ZipData instead. ZipData should be set to the entire contents of the zip file; this will allow you to read from the archive without writing any temporary files to disk.

If you would like to extract data from the archive without ever writing to disk you should also set WriteToProgressEvent to true, and after invoking Scan, you should set the value of DecompressedName for each file in the Files collection to an empty string. Then, when you invoke Extract (or ExtractAll) the data will be provided in the Progress event.

This property is write-only. Note that modifying a zip file stored in ZipData is not supported, so Append, Delete, etc., will throw exceptions.

This property is write-only and not available at design time.

Data Type

Binary String

Abort Method (SevenZip Class)

Aborts the current operation.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int Abort();

Unicode (Windows)
INT Abort();

int ipworkszip_sevenzip_abort(void* lpObj);

int Abort();

Remarks

Abort may be used to immediately interrupt compression or decompression. Any files partially written by the class will be deleted.

In case Append or Delete is aborted the archive will be left in its original state.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

AppendFiles Method (SevenZip Class)

Adds specified files to an existing archive.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int AppendFiles();

Unicode (Windows)
INT AppendFiles();

int ipworkszip_sevenzip_appendfiles(void* lpObj);

int AppendFiles();

Remarks

All files contained in the Files collection will be appended to the archive specified by ArchiveFile.

When AppendFiles is called, only those files which are to be added to the archive must exist inside the collection. Note that if you call Scan or Extract, you must empty the collection before adding files to the collection to be appended.

After the file is added, the collection will be updated appropriately.

This method may only be used to add files to an existing archive. To add files to a new archive, the IncludeFiles and Compress methods should be used.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Compress Method (SevenZip Class)

Creates the compressed archive.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int Compress();

Unicode (Windows)
INT Compress();

int ipworkszip_sevenzip_compress(void* lpObj);

int Compress();

Remarks

Invoking Compress creates the archive specified by ArchiveFile. When the method is called, all files specified by the DecompressedName field of the Files collection will be compressed and written to ArchiveFile.

The compressed data may be streamed out by setting WriteToProgressEvent to true. If streaming is enabled the compressed data will also be provided via the Progress event. If ArchiveFile is set to an empty string the archive will be written only to this event.

The files to compress are specified in the Files collection. The file names are specified by CompressedName and DecompressedName. These should be specified before invoking Compress, either manually or by invoking IncludeFiles.

The BeginFile and EndFile events will be fired as files are processed, and the Progress event will be fired as data is compressed.

Existing files will be overwritten by the class if OverwriteFiles is set to true. Finer control over which files are overwritten may be gained by trapping the Overwrite event.

Example (Creating an Archive)

ZipControl.ArchiveFile = "c:\test.zip" ZipControl.RecurseSubdirectories = true ZipControl.IncludeFiles("c:\foo\*") ZipControl.Compress()

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Config Method (SevenZip Class)

Sets or retrieves a configuration setting.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
char* Config(const char* lpszConfigurationString);

Unicode (Windows)
LPWSTR Config(LPCWSTR lpszConfigurationString);

char* ipworkszip_sevenzip_config(void* lpObj, const char* lpszConfigurationString);

QString Config(const QString& qsConfigurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Error Handling (C++)

This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

Delete Method (SevenZip Class)

Deletes one or more files from an existing archive.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int Delete(const char* lpszFileNames);

Unicode (Windows)
INT Delete(LPCWSTR lpszFileNames);

int ipworkszip_sevenzip_delete(void* lpObj, const char* lpszFileNames);

int Delete(const QString& qsFileNames);

Remarks

Delete deletes one or more files from an existing archive, without reprocessing the compressed data. The archive will be opened immediately, and the file(s) will immediately be removed permanently from the archive.

The list of filenames should be specified exactly as when calling Extract:

Filenames may be set to one or more filenames or directory names. Files may be specified with or without a path, and with or without wildcards. If a path is specified, files in the indicated directory will be affected; subdirectories will be recursed into if RecurseSubdirectories is true. If no path is specified but wildcards are, matching files in all directories will be affected. If a single filename without a path is specified, it must correspond exactly to the appropriate value of CompressedName.

Directories should end with a slash ("/"). If a directory is specified, all files and subdirectories in the specified directory will be affected.

A pipe character ("|") should be used to separate multiple file or directory names. Alternatively, the method may be invoked repeatedly.

The ExcludedFiles property may be used to further limit the files to be deleted. When Delete is used to delete a directory or match wildcards, each file to be deleted is first compared against ExcludedFiles, and any files marked as excluded will not be deleted. When Delete is used to delete a single file, the value of ExcludedFiles will be ignored.

When the method is invoked, the Scan method will first be invoked, if it has not been invoked already. Note that if IncludeFiles has been invoked, or if the values of CompressedName and DecompressedName for each file in the Files collection have been set, this information will be reset by the call to Scan.

When deleting multiple files, the class will operate most efficiently if all filenames are passed to Delete in a single invocation of the method. Invoking Delete repeatedly on large archives is not recommended.

Invoking Delete will only remove files from ArchiveFile; it will not delete the files from the disk.

Example

ZipControl.ArchiveFile = "c:\\test.zip" ZipControl.Delete("default_readme.txt"); ZipControl.Append("\\mydir\\my_readme.txt", "my_readme.txt")

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Extract Method (SevenZip Class)

Extracts a single file, directory, or group of files, from the archive.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int Extract(const char* lpszFileNames);

Unicode (Windows)
INT Extract(LPCWSTR lpszFileNames);

int ipworkszip_sevenzip_extract(void* lpObj, const char* lpszFileNames);

int Extract(const QString& qsFileNames);

Remarks

Extract extracts one or more files from the archive. The file(s) will be extracted to the directory specified by ExtractToPath, and given the names found in the archive or specified by the DecompressedName of the file in the Files collection.

Filenames may be set to one or more filenames or directory names. Files may be specified with or without a path, and with or without wildcards. If a path is specified, files in the indicated directory will be affected; subdirectories will be recursed into if RecurseSubdirectories is true. If no path is specified but wildcards are, matching files in all directories will be affected. If a single filename without a path is specified, it must correspond exactly to the appropriate value of CompressedName.

Directories should end with a slash ("/"). If a directory is specified, all files and subdirectories in the specified directory will be affected.

A pipe character ("|") should be used to separate multiple file or directory names. Alternatively, the method may be invoked repeatedly.

The ExcludedFiles property may be used to further limit the files to be extracted. When Extract is used to extract a directory or match wildcards, each file to be extracted is first compared against ExcludedFiles, and any files marked as excluded will not be extracted. When Extract is used to extract a single file, the value of ExcludedFiles will be ignored.

To extract all files in the archive, the ExtractAll method may be used.

The BeginFile and EndFile events will be fired before and after each file is extracted, and the Progress event will be fired as the data is extracted. If WriteToProgressEvent is set to true, the decompressed data will be streamed out through the Progress event.

Example

ZipControl.ArchiveFile = "c:\test.tar" ZipControl.ExcludedFiles = "*.bak | backup/" ZipControl.ExtractToPath = "c:\temp" ZipControl.Extract("*") Example ZipControl.ArchiveFile = "c:\test.zip" ZipControl.ExcludedFiles = "" ZipControl.ExtractToPath = "c:\temp" ZipControl.Extract("code/") Example ZipControl.ArchiveFile = "c:\test.jar" ZipControl.ExcludedFiles = "*.txt" ZipControl.ExtractToPath = "c:\" ZipControl.Extract("* | docs/readme.txt")

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

ExtractAll Method (SevenZip Class)

Extracts all files from the compressed archive.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int ExtractAll();

Unicode (Windows)
INT ExtractAll();

int ipworkszip_sevenzip_extractall(void* lpObj);

int ExtractAll();

Remarks

ExtractAll extracts all files from the archive. The file(s) will be extracted to the directory specified by ExtractToPath, and given the names found in the archive or specified by the DecompressedName field of the file in the Files collection.

If Scan has not been invoked when ExtractAll is called, Scan will automatically be invoked, and the Files collection will be set to the values found in the archive. To manually set the decompressed filenames, Scan should be invoked before setting the DecompressedName field.

Invoking this method is equivalent to setting ExcludedFiles to the empty string, and then invoking Extract with "*" as the argument. Calling this method will cause the ExcludedFiles property to be ignored; to extract all files except those specified by ExcludedFiles, call the Extract method with the wildcard "*" as the method parameter instead of calling this method.

The BeginFile and EndFile events will be fired before and after each file is extracted, and the Progress event will be fired as the data is extracted. If WriteToProgressEvent is set to true, the decompressed data will be streamed out through the Progress event.

Example (Extracting from an Archive)

ZipControl.ArchiveFile = "c:\temp.zip" ZipControl.ExtractToPath = "c:\extracted\" ZipControl.ExtractAll()

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

IncludeFiles Method (SevenZip Class)

Specifies that the indicated files should be added to the archive.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int IncludeFiles(const char* lpszFileNames);

Unicode (Windows)
INT IncludeFiles(LPCWSTR lpszFileNames);

int ipworkszip_sevenzip_includefiles(void* lpObj, const char* lpszFileNames);

int IncludeFiles(const QString& qsFileNames);

Remarks

IncludeFiles may be used before Compress, to specify the files to be compressed. Invoking this method populates the Files collection accordingly.

Invoking the method does not create or alter the archive.

The argument should be a pipe ("|") -delimited sequence of one or more filenames. The filenames should be specified with paths if necessary, so that the files may be found on the local file system. The filenames will be stored as is in the DecompressedName field, and without a pathname in the CompressedName field of the Files collection.

Filenames may include the wildcards '?', '*', and '[ .. ]'. '?' will match any single character, and '*' will match an arbitrary sequence of characters. '[ .. ]' may be used to match any of the characters inside, or a range, such as '[a-z]'. A '\' can be used to escape wildcard characters.

If wildcards are specified, the file system will be scanned and all files matching the specified mask will be added. Moreover, subdirectories will be recursed into if RecurseSubdirectories is set to true. When recursing into subdirectories, relative path information will be stored in CompressedName field of the Files collection.

The ExcludedFiles may be used to limit the files to be compressed. This property is checked when Compress is invoked, rather than when IncludeFiles is invoked, so this property may be set before or after invoking IncludeFiles.

Note that invoking IncludeFiles will not reset the class, or remove old values of CompressedName and DecompressedName. This may be done by first clearing the Files collection.

Example

ZipControl.IncludeFiles("c:\test\* | c:\readme") ZipControl.ExcludedFiles = "*.tmp" ZipControl.Compress()

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Reset Method (SevenZip Class)

Resets the class.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int Reset();

Unicode (Windows)
INT Reset();

int ipworkszip_sevenzip_reset(void* lpObj);

int Reset();

Remarks

Reset resets the state of the class. The Files collection will be cleared, all properties will be set to their default values, and any files open will be closed.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Scan Method (SevenZip Class)

Scans the compressed archive.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int Scan();

Unicode (Windows)
INT Scan();

int ipworkszip_sevenzip_scan(void* lpObj);

int Scan();

Remarks

This method will scan the archive specified by ArchiveFile. The number of files and their names and sizes will be determined and written to the Files collection.

After scanning the archive, the values of DecompressedName may be changed if desired, and any number of files may be decompressed. The Extract method allows you to decompress files of your choice, and the ExtractAll method will decompress the entire archive.

Changing the values of the CompressedName field or the number of files in the Files collection will invalidate the scan. If either of these is changed and Extract or ExtractAll is then called; Scan will automatically be called again, and these values will be reset to their original values.

Calling this method will frequently generate a trappable error if the archive is corrupt. This is not guaranteed, however, as Scan only examines the headers.

Example

Dim i As Integer ZipControl.ArchiveFile = "c:\temp.zip" ZipControl.Scan For i = 0 To ZipControl.FileCount - 1 Debug.Print "File Name: " & ZipControl.FileDecompressedName(i) Debug.Print "File Size: " & ZipControl.FileDecompressedSize(i) Next i

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

SetArchiveInputStream Method (SevenZip Class)

The stream to read the zip, tar, jar, or gzip archive from.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int SetArchiveInputStream(IPWorksZipStream* sArchiveStream);

Unicode (Windows)
INT SetArchiveInputStream(IPWorksZipStream* sArchiveStream);

int ipworkszip_sevenzip_setarchiveinputstream(void* lpObj, IPWorksZipStream* sArchiveStream);

int SetArchiveInputStream(IPWorksZipStream* sArchiveStream);

Remarks

This method should be set when the archive is to be read from a stream when Extract is called.

By default, and when this is set to null, the class will read from the file specified by ArchiveFile. However, when this is a valid stream, the data will be read from the stream.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

SetArchiveOutputStream Method (SevenZip Class)

The stream to write the zip, tar, jar, or gzip archive to.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int SetArchiveOutputStream(IPWorksZipStream* sArchiveStream);

Unicode (Windows)
INT SetArchiveOutputStream(IPWorksZipStream* sArchiveStream);

int ipworkszip_sevenzip_setarchiveoutputstream(void* lpObj, IPWorksZipStream* sArchiveStream);

int SetArchiveOutputStream(IPWorksZipStream* sArchiveStream);

Remarks

This method should be set when the archive is to be written to a stream when Compress is called.

By default, and when this is set to null, the class will write to the file specified by ArchiveFile. However, when this is a valid stream, the data will be written to the stream.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Update Method (SevenZip Class)

Will update certain files in an archive.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
int Update(const char* lpszFileNames);

Unicode (Windows)
INT Update(LPCWSTR lpszFileNames);

int ipworkszip_sevenzip_update(void* lpObj, const char* lpszFileNames);

int Update(const QString& qsFileNames);

Remarks

When this method is called, the class will attempt to update files in the specified archive with the current files listed in the files collection. You may use the FileNames parameter to tell the class which files in the collection/archive must be updated.

Filenames may be set to one or more filenames or directory names. Files may be specified with or without a path, and with or without wildcards. If a path is specified, files in the indicated directory will be affected; subdirectories will be recursed into if RecurseSubdirectories is true. If no path is specified but wildcards are, matching files in all directories will be affected. If a single filename without a path is specified, it must correspond exactly to the appropriate value of CompressedName.

Directories should end with a slash ("/"). If a directory is specified, all files and subdirectories in the specified directory will be affected.

A pipe character ("|") should be used to separate multiple file or directory names. Alternatively, the method may be invoked repeatedly.

If BeginFileOnUpdate is set to True, BeginFile and EndFile will fire before and after updating each specified file listed in the Files collection;

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

BeginFile Event (SevenZip Class)

Fired before each file is processed.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
virtual int FireBeginFile(SevenZipBeginFileEventParams *e);

typedef struct {
  int Index;
  int Skip;
  int reserved;
} SevenZipBeginFileEventParams;


Unicode (Windows)
virtual INT FireBeginFile(SevenZipBeginFileEventParams *e);

typedef struct {
  INT Index;
  BOOL Skip;
  INT reserved;
} SevenZipBeginFileEventParams;

#define EID_SEVENZIP_BEGINFILE 1

virtual INT IPWORKSZIP_CALL FireBeginFile(INT &iIndex, BOOL &bSkip);

class SevenZipBeginFileEventParams {
public:
  int Index();

  bool Skip();
  void SetSkip(bool bSkip);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void BeginFile(SevenZipBeginFileEventParams *e);

// Or, subclass SevenZip and override this emitter function.
virtual int FireBeginFile(SevenZipBeginFileEventParams *e) {...}

Remarks

BeginFile is fired before each file is processed by the compressor or decompressor, as appropriate. Index contains the array index of the file about to be processed, and the CompressedName, DecompressedName, CompressedSize (decompression only), and DecompressedSize fields of the Files collection for this index contain more detailed information about the file about to be processed.

When extracting, an alternate location may be specified by trapping the event, and modifying DecompressedName and/or ExtractToPath. If the appropriate value of DecompressedName is set to an empty string, the file will not be written to disk. If WriteToProgressEvent is true, the file will still be decompressed, and the data may be extracted through the Progress event.

This event may also be trapped while compressing. Attributes, CompressedName, DecompressedName, and CompressedDate may be changed.

You may set the Skip parameter to true in order to skip the file completely while compressing or extracting.

EndFile Event (SevenZip Class)

Fired after each file is processed.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
virtual int FireEndFile(SevenZipEndFileEventParams *e);

typedef struct {
  int Index;
  int reserved;
} SevenZipEndFileEventParams;


Unicode (Windows)
virtual INT FireEndFile(SevenZipEndFileEventParams *e);

typedef struct {
  INT Index;
  INT reserved;
} SevenZipEndFileEventParams;

#define EID_SEVENZIP_ENDFILE 2

virtual INT IPWORKSZIP_CALL FireEndFile(INT &iIndex);

class SevenZipEndFileEventParams {
public:
  int Index();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void EndFile(SevenZipEndFileEventParams *e);

// Or, subclass SevenZip and override this emitter function.
virtual int FireEndFile(SevenZipEndFileEventParams *e) {...}

Remarks

EndFile is fired after each file is processed by the compressor or decompressor, as appropriate. Index contains the array index of the file processed, and the CompressedName, DecompressedName, CompressedSize, and DecompressedSize fields in the Files collection for this index contain more detailed information about the file processed.

Error Event (SevenZip Class)

Information about non-fatal errors.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
virtual int FireError(SevenZipErrorEventParams *e);

typedef struct {
  const char *Description;
  int ErrorCode;
  int Index;
  const char *Filename;
  int Ignore;
  int reserved;
} SevenZipErrorEventParams;


Unicode (Windows)
virtual INT FireError(SevenZipErrorEventParams *e);

typedef struct {
  LPCWSTR Description;
  INT ErrorCode;
  INT Index;
  LPCWSTR Filename;
  BOOL Ignore;
  INT reserved;
} SevenZipErrorEventParams;

#define EID_SEVENZIP_ERROR 3

virtual INT IPWORKSZIP_CALL FireError(LPSTR &lpszDescription, INT &iErrorCode, INT &iIndex, LPSTR &lpszFilename, BOOL &bIgnore);

class SevenZipErrorEventParams {
public:
  const QString &Description();

  int ErrorCode();

  int Index();

  const QString &Filename();

  bool Ignore();
  void SetIgnore(bool bIgnore);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Error(SevenZipErrorEventParams *e);

// Or, subclass SevenZip and override this emitter function.
virtual int FireError(SevenZipErrorEventParams *e) {...}

Remarks

The Error event is fired when non-fatal errors occur during compression or decompression. Note that if this event is fired during decompression this may indicate that the archive is corrupt.

By default these errors will cause the component to fail with an exception. The exception may be overridden by setting Ignore to true. This will cause the error to be ignored, the file will be skipped if necessary, and the class will continue operation.

ErrorCode will correspond to one of the following errors:

Description contains a textual description of the error. Index and Filename contain the array index (where appropriate) and filename of the file being processed at the time of the error.

Overwrite Event (SevenZip Class)

Fired whenever a file exists and may be overwritten.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
virtual int FireOverwrite(SevenZipOverwriteEventParams *e);

typedef struct {
  char *Filename;
  int Overwrite;
  int reserved;
} SevenZipOverwriteEventParams;


Unicode (Windows)
virtual INT FireOverwrite(SevenZipOverwriteEventParams *e);

typedef struct {
  LPWSTR Filename;
  BOOL Overwrite;
  INT reserved;
} SevenZipOverwriteEventParams;

#define EID_SEVENZIP_OVERWRITE 4

virtual INT IPWORKSZIP_CALL FireOverwrite(LPSTR &lpszFilename, BOOL &bOverwrite);

class SevenZipOverwriteEventParams {
public:
  const QString &Filename();
  void SetFilename(const QString &qsFilename);

  bool Overwrite();
  void SetOverwrite(bool bOverwrite);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Overwrite(SevenZipOverwriteEventParams *e);

// Or, subclass SevenZip and override this emitter function.
virtual int FireOverwrite(SevenZipOverwriteEventParams *e) {...}

Remarks

Overwrite is fired when a file is about to be overwritten, and would overwrite an existing file. The event is fired during decompression.

Filename contains the full name of the file, specified with its pathname.

Overwrite specifies whether or not the file will be overwritten. For Zip, Jar, and Tar, this is equal by default to the value of the OverwriteFiles property. For Gzip, this value defaults to true.

Either of the parameters may be changed when the event is fired. Changing the value of Overwrite will override the default behavior of the class, and cause the file to be overwritten or not overwritten, depending on the value set. If Filename is changed, the value of Overwrite will be ignored, and the file will be written with the specified name. If a file of the new name also exists this file will be silently overwritten.

Progress Event (SevenZip Class)

Fired as progress is made.

Syntax

• C++
• C
• Qt

ANSI (Cross Platform)
virtual int FireProgress(SevenZipProgressEventParams *e);

typedef struct {
  const char *Data;
  int lenData;
  const char *Filename;
  int64 BytesProcessed;
  int PercentProcessed;
  int reserved;
} SevenZipProgressEventParams;


Unicode (Windows)
virtual INT FireProgress(SevenZipProgressEventParams *e);

typedef struct {
  LPCSTR Data;
  INT lenData;
  LPCWSTR Filename;
  LONG64 BytesProcessed;
  INT PercentProcessed;
  INT reserved;
} SevenZipProgressEventParams;

#define EID_SEVENZIP_PROGRESS 5

virtual INT IPWORKSZIP_CALL FireProgress(LPSTR &lpData, INT &lenData, LPSTR &lpszFilename, LONG64 &lBytesProcessed, INT &iPercentProcessed);

class SevenZipProgressEventParams {
public:
  const QByteArray &Data();

  const QString &Filename();

  qint64 BytesProcessed();

  int PercentProcessed();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Progress(SevenZipProgressEventParams *e);

// Or, subclass SevenZip and override this emitter function.
virtual int FireProgress(SevenZipProgressEventParams *e) {...}

Remarks

The Progress event is automatically fired as compression or decompression is performed. When WriteToProgressEvent is true, the output data is provided through the Data parameter, allowing for it to be streamed out.

Filename contains the name of the file being written. If no file is being written, Filename will contain an empty string, and the output data will be provided exclusively through this event.

BytesProcessed contains the total number of uncompressed bytes processed. PercentProcessed contains the percent of uncompressed bytes processed, corresponding roughly to the running time of the operation.

For Gzip extraction only, BytesProcessed and PercentProcessed will reflect the number of compressed bytes extracted, as it is generally impossible to predetermine the total uncompressed size.

If WriteToProgressEvent is false, Data will contain null.

SevenZipFile Type

The file in the archive.

Syntax

IPWorksZipSevenZipFile (declared in ipworkszip.h)

Remarks

This type contains information about the file that either exists in the archive or is being added to the archive.

Fields

Constructors

SevenZipFile()

SevenZipFile(const char* lpszDecompressedName)

SevenZipFile(const char* lpszCompressedName, const char* lpszDecompressedName)

SevenZipFile(const char* lpszCompressedName, IPWorksZipStream* sInputStream)

IPWorksZipList Type

Syntax

IPWorksZipList<T> (declared in ipworkszip.h)

Remarks

IPWorksZipList is a generic class that is used to hold a collection of objects of type T, where T is one of the custom types supported by the SevenZip class.

int GetCount() {}

int SetCount(int count) {}

T* Get(int index) {}

T* Set(int index, T* value) {}

IPWorksZipStream Type

Syntax

IPWorksZipStream (declared in ipworkszip.h)

Remarks

The SevenZip class includes one or more API members that take a stream object as a parameter. To use such API members, create a concrete class that implements the IPWorksZipStream interface and pass the SevenZip class an instance of that concrete class.

When implementing the IPWorksZipStream interface's properties and methods, they must behave as described below. If the concrete class's implementation does not behave as expected, undefined behavior may occur.

bool CanRead() { return true; }

bool CanSeek() { return true; }

bool CanWrite() { return true; }

int64 GetLength() = 0;

void Close() {}

int Flush() { return 0; }

int Read(void* buffer, int count) = 0;

int64 Seek(int64 offset, int seekOrigin) = 0;

int Write(const void* buffer, int count) = 0;

Config Settings (SevenZip Class)

SevenZip Config Settings

Base Config Settings

Trappable Errors (SevenZip Class)

Error Handling (C++)

Call the GetLastErrorCode() method to obtain the last called method's result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. Known error codes are listed below. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

The following errors may be generated by the class. Note that frequently the error message will contain more specific information than what is listed here.

Note that some non-fatal errors may be trapped and explicitly ignored in the Error event. This will allow the class to continue operation even in case of error.

SevenZip Errors