Jar Component

Properties   Methods   Events   Config Settings   Errors  

The Jar component may be used to create or decompress Java archives.

Syntax

TipzJar

Remarks

The operation of the component is similar to that of Zip. .class and other files may be added into a .jar file, and then may be imported into Java code or executed by a JVM.

To create a new archive, first set the ArchiveFile property to the name of the archive to be created. Then, specify the files to be compressed either by invoking IncludeFiles, or by adding a new object to the Files collection and setting the values of the DecompressedName and CompressedName. fields. Finally, call the Compress method to create the archive.

To decompress an existing archive, set ArchiveFile to the name of the archive to be decompressed. The ExtractToPath property may be set, and then calling the ExtractAll method will decompress all files in the archive to this path.

For finer control, the Scan method should be used to read the file information stored in the archive. This will fill out the information in the Files collection. The values of DecompressedName may then be changed if desired. Finally, ExtractAll may be used to decompress the entire archive, or Extract may be used for finer control.

Data may be streamed out by setting WriteToProgressEvent to true. Then, the Progress event may be trapped to retrieve the data.

All Java archives contain two special entries, a META-INF directory and a manifest. By default, the component will automatically generate a default manifest and add the special entries to the beginning of the archive. To instead add a custom manifest to the archive the ManifestFile property should be set.

During decompression, the archive is treated as an ordinary zip file.

Example (Creating a Jar File)

ZipControl.ArchiveFile = "c:\test.jar" ZipControl.RecurseSubdirectories = false ZipControl.IncludeFiles("c:\code\*.class") ZipControl.ManifestFile = "c:\code\manifest.mf" ZipControl.Compress() Example (Extracting from a Jar File)

ZipControl.ArchiveFile = "c:\test.jar" ZipControl.ExtractToPath = "c:\extracted\" ZipControl.Extract("*.class")

Property List


The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

ArchiveFileThe name of the zip, gzip, tar, or jar archive.
CompressionLevelThe compression level to use.
ExcludedFilesA list of files to exclude.
ExtractToPathA base path to decompress to.
FilesCollection of Jar archive files.
JarData(Decompression only) The jar file contents as a byte array.
ManifestFileThe name of the manifest file.
OverwriteFilesWhether or not to overwrite files.
RecurseSubdirectoriesWhether or not to recurse into subdirectories.

Method List


The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

AbortAborts the current operation.
AppendFilesAdds specified files to an existing archive.
CompressCreates the compressed archive.
ConfigSets or retrieves a configuration setting.
DeleteDeletes one or more files from an existing archive.
ExtractExtracts a single file, directory, or group of files, from the archive.
ExtractAllExtracts all files from the compressed archive.
IncludeFilesSpecifies that the indicated files should be added to the archive.
ResetResets the component.
ScanScans the compressed archive.
SetArchiveInputStreamThe stream to read the zip, tar, jar, or gzip archive from.
SetArchiveOutputStreamThe stream to write the zip, tar, jar, or gzip archive to.

Event List


The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

BeginFileFired before each file is processed.
EndFileFired after each file is processed.
ErrorInformation about non-fatal errors.
OverwriteFired whenever a file exists and may be overwritten.
ProgressFired as progress is made.

Config Settings


The following is a list of config settings for the component with short descriptions. Click on the links for further details.

CheckForFileLocksIf true, the component requests an exclusive lock during initialization.
ExcludedAttributesAttributes of files to be excluded.
ExtractFilesOnlyWhether to only extract the files contained within the archive.
FileNamesCaseSensitiveThis config controls the case-sensitivity of the component when working with filenames.
OverwriteReadonlyFilesWhether to overwrite readonly files.
WriteToProgressEventWhether or not to write data to the Progress Event.
BuildInfoInformation about the product's build.
CodePageThe system code page used for Unicode to Multibyte translations.
LicenseInfoInformation about the current license.
MaskSensitiveDataWhether sensitive data is masked in log messages.
UseInternalSecurityAPIWhether or not to use the system security libraries or an internal implementation.

ArchiveFile Property (Jar Component)

The name of the zip, gzip, tar, or jar archive.

Syntax

property ArchiveFile: String read get_ArchiveFile write set_ArchiveFile;

Default Value

''

Remarks

This property specifies the name of the archive to be read or written. This property is required when extracting files.

When Scan, Extract, or ExtractAll is invoked, the file specified by ArchiveFile will be opened for read. If the file does not exist, a trappable error will be generated.

When Compress is called, the file named by ArchiveFile will be written; if a file of this name already exists the Overwrite event will be fired. If ArchiveFile is set to the empty string (''), the archive will not be written to disk, and will be provided only through the Progress event.

The filename may be specified with or without a path. Paths may be relative or absolute, and should be specified in the format native to the host operating system. The filename should be specified with the appropriate extension (such as 'zip'); an extension will not automatically be appended by the component.

If the file cannot be read, or written, as appropriate, a trappable error will be generated.

Example (Creating an Archive)

ZipControl.ArchiveFile = "c:\test.zip" ZipControl.RecurseSubdirectories = true ZipControl.IncludeFiles("c:\foo\*") ZipControl.Compress()

Note: an archive already open for read may be closed by setting ArchiveFile to the empty string ('').

CompressionLevel Property (Jar Component)

The compression level to use.

Syntax

property CompressionLevel: Integer read get_CompressionLevel write set_CompressionLevel;

Default Value

4

Remarks

This property specifies the level of compression to be used, between 0 and 6. Higher values will cause the component to compress better; lower values will cause the component to compress faster. A value of 0 will store the file without compression.

Set the level of CompressionLevel in the BeginFile event to apply different levels of compression to different files.

ExcludedFiles Property (Jar Component)

A list of files to exclude.

Syntax

property ExcludedFiles: String read get_ExcludedFiles write set_ExcludedFiles;

Default Value

''

Remarks

This property specifies files that should be excluded when Compress or Extract is invoked. When Compress is invoked, each value of DecompressedName in Files will be compared to ExcludedFiles, and each file will be excluded if the name matches. When Extract is called, each value of CompressedName in Files matching the parameter to Extract will be compared to ExcludedFiles, and will be excluded if appropriate. Calling the ExtractAll method will ignore this property and extract all files in the archive.

This property may be set to one or more filenames or directory names. Files may be specified with or without a path, and with or without wildcards. If a path is specified, files in the indicated directory will be excluded; subdirectories will be recursed into if RecurseSubdirectories is true. If no path is specified but wildcards are, matching files in all directories will be excluded. If a single filename without a path is specified, it must correspond exactly to the appropriate value of CompressedName or DecompressedName.

Directories should end with a slash ('/' or '\', as appropriate.) If a directory is specified, all files and subdirectories in the specified directory will be excluded.

A pipe character ('|') should be used to separate multiple file or directory names.

The following examples illustrate the use of the property:

Example

ZipControl.ArchiveFile = "c:\test.zip" ZipControl.IncludeFiles("c:\test\*") ZipControl.ExcludedFiles = "*.tmp" ZipControl.Compress() Example

ZipControl.ArchiveFile = "c:\test.tar" ZipControl.Scan() ZipControl.ExcludedFiles = "*.bak | backup/" ZipControl.ExtractToPath = "c:\temp" ZipControl.Extract("*") As per the examples, the property should be specified differently for compression and decompression. When invoking Compress, the format of ExcludedFiles should correspond to that of the local file system. When invoking Extract the format should correspond to standard (UNIX) format, and should not contain drive letters or backslashes.

You may exclude files based on their attributes as well: See the ExcludedAttributes configuration setting for more information.

If the property is set to the empty string, no files will be excluded. This property is never reset automatically, so be sure to reset it manually if using a single instance of the component for both compression and extraction. Failure to do so may result in I/O errors or unexpected results.

ExtractToPath Property (Jar Component)

A base path to decompress to.

Syntax

property ExtractToPath: String read get_ExtractToPath write set_ExtractToPath;

Default Value

''

Remarks

Setting the ExtractToPath property affects the operation of the Extract and ExtractAll methods. Setting this property to a nonempty string will cause all decompressed files to be written to the specified path. If pathnames are given in the values of DecompressedName they will be regarded as relative to ExtractToPath.

If the specified directory does not exist, it will be created when extraction is done.

ExtractToPath should always be specified in the format native to the host operating system, and with a trailing slash or backslash. If the path is specified otherwise, it will be immediately converted and stored in the converted format. For example, '/temp' would be immediately converted to '\temp\' on a Windows system.

Example (Extracting from an Archive)

ZipControl.ArchiveFile = "c:\temp.zip" ZipControl.ExtractToPath = "c:\extracted\" ZipControl.ExtractAll()

Example - Adding Files Dim i as Integer ZipControl.ArchiveFile = "c:\test.zip" ZipControl.Scan() For i = 0 to ZipControl.Files.Count - 1 ZipControl.Files(i).DecompressedName(i) = "c:\temp\" + ZipControl.Files(i).DecompressedName Next i ZipControl.ExtractToPath = "" ZipControl.ExtractAll() ZipControl.IncludeFiles("c:\extra\*") ZipControl.Compress()

Files Property (Jar Component)

Collection of Jar archive files.

Syntax

property Files: TipzJARFileList read get_Files write set_Files;

Remarks

When a compressed archive is scanned or decompressed, the values of this collection are populated accordingly.

When creating a compressed archive, this property may be used to set the files to be stored. For each entry added to the collection, the DecompressedName field should be set to the name of the file to be decompressed, and the CompressedName field should be set to the filename to store in the archive.

Archives may also be created using the IncludeFiles method. Invoking the IncludeFiles method causes the values of this collection to be filled out. These values may then be changed directly if desired.

Note that Jar archives always contain two special entries: a manifest file, and a META-INF directory. When Compress is invoked, the values of the CompressedName fields will be checked, and the special entries will be added at the beginning if necessary. Note that this will cause all existing files to be shifted.

Please refer to the JARFile type for a complete list of fields.

JarData Property (Jar Component)

(Decompression only) The jar file contents as a byte array.

Syntax

property JarData: String write set_JarData;
property JarDataB: TBytes write set_JarDataB;

Default Value

''

Remarks

Normally you should set ArchiveFile before invoking Scan or Extract. If you prefer to read the jar file from memory you may set JarData instead. JarData should be set to the entire contents of the jar file; this will allow you to read from the archive without writing any temporary files to disk.

If you would like to extract data from the archive without ever writing to disk you should also set WriteToProgressEvent to true, and after invoking Scan, you should set the value of DecompressedName for each file in the Files collection to an empty string. Then, when you invoke Extract (or ExtractAll) the data will be provided in the Progress event.

This property is write-only. Note that modifying a jar file stored in JarData is not supported, so Append, Delete, etc., will throw exceptions.

This property is write-only and not available at design time.

ManifestFile Property (Jar Component)

The name of the manifest file.

Syntax

property ManifestFile: String read get_ManifestFile write set_ManifestFile;

Default Value

''

Remarks

This property specifies the location of the manifest to be written to the jar archive.

The filename may be specified with or without a path. Paths may be relative or absolute, and should be specified in the format native to the host operating system. If the format is not native to the host operating system, the component will immediately attempt to convert it.

When Compress is invoked, the location of the manifest is determined according to ManifestFile and the CompressedName and DecompressedName fields of the Files collection. The collection will be updated immediately prior to compression, and additional entries will be added at the beginning if necessary. If ManifestFile is set to a nonempty string, its value will be written to the appropriate value of DecompressedName, overwriting any pre-existing value. If ManifestFile is set to an empty string, and any value of the CompressedName field in the Files collection has the value "META-INF/MANIFEST.MF", the corresponding value of DecompressedName will be used as the source of the manifest. If a source for the manifest is not specified, a default manifest will automatically be generated and added to the archive.

When Scan is called (either by the user or by Extract or ExtractAll), the location of the manifest will be determined, and the value of this property will be set to the corresponding value of the DecompressedName for that file. The value of ManifestFile may then be changed to write the manifest to a different location.

After calling Scan, "META-INF/MANIFEST.MF" may be passed as an argument to Extract to extract the manifest.

If during compression the file cannot be read, a trappable error will be generated.

OverwriteFiles Property (Jar Component)

Whether or not to overwrite files.

Syntax

property OverwriteFiles: Boolean read get_OverwriteFiles write set_OverwriteFiles;

Default Value

true

Remarks

If this property is set to true, existing files will be overwritten when decompressing. When Extract or ExtractAll is called, each file specified in Files will be checked for existence. If a file exists, the Overwrite event will be fired, and the files will be overwritten if OverwriteFiles is set to true.

More precise control of which files should be overwritten may be gained by listening to the Overwrite event and altering its parameters when the event is fired.

This property only affects the operation of Extract and ExtractAll. When compressing files, ArchiveFile will always be overwritten unless the user specifies otherwise in the Overwrite event.

RecurseSubdirectories Property (Jar Component)

Whether or not to recurse into subdirectories.

Syntax

property RecurseSubdirectories: Boolean read get_RecurseSubdirectories write set_RecurseSubdirectories;

Default Value

true

Remarks

This property affects the behavior of IncludeFiles and Extract and the meaning of ExcludedFiles. If this property is set to true, IncludeFiles will recurse into all subdirectories whenever it performs a search on the file system.

Be sure RecurseSubdirectories is set to the appropriate value before invoking IncludeFiles, Extract, or Compress; changing the value of this property after method calls will not retroactively alter their effects.

Example (Creating an Archive)

ZipControl.ArchiveFile = "c:\test.zip" ZipControl.RecurseSubdirectories = true ZipControl.IncludeFiles("c:\foo\*") ZipControl.Compress()

Abort Method (Jar Component)

Aborts the current operation.

Syntax

procedure Abort();

Remarks

Abort may be used to immediately interrupt compression or decompression. Any files partially written by the component will be deleted.

In case Append or Delete is aborted the archive will be left in its original state.

AppendFiles Method (Jar Component)

Adds specified files to an existing archive.

Syntax

procedure AppendFiles();

Remarks

All files contained in the Files collection will be appended to the archive specified by ArchiveFile.

When AppendFiles is called, only those files which are to be added to the archive must exist inside the collection. Note that if you call Scan or Extract, you must empty the collection before adding files to the collection to be appended.

After the file is added, the collection will be updated appropriately.

This method may only be used to add files to an existing archive. To add files to a new archive, the IncludeFiles and Compress methods should be used.

Compress Method (Jar Component)

Creates the compressed archive.

Syntax

procedure Compress();

Remarks

Invoking Compress creates the archive specified by ArchiveFile. When the method is called, all files specified by the DecompressedName field of the Files collection will be compressed and written to ArchiveFile.

The compressed data may be streamed out by setting WriteToProgressEvent to true. If streaming is enabled the compressed data will also be provided via the Progress event. If ArchiveFile is set to an empty string the archive will be written only to this event.

The files to compress are specified in the Files collection. The file names are specified by CompressedName and DecompressedName. These should be specified before invoking Compress, either manually or by invoking IncludeFiles.

The BeginFile and EndFile events will be fired as files are processed, and the Progress event will be fired as data is compressed.

Existing files will be overwritten by the component if OverwriteFiles is set to true. Finer control over which files are overwritten may be gained by trapping the Overwrite event.

Example (Creating an Archive)

ZipControl.ArchiveFile = "c:\test.zip" ZipControl.RecurseSubdirectories = true ZipControl.IncludeFiles("c:\foo\*") ZipControl.Compress()

Config Method (Jar Component)

Sets or retrieves a configuration setting.

Syntax

function Config(ConfigurationString: String): String;

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Delete Method (Jar Component)

Deletes one or more files from an existing archive.

Syntax

procedure Delete(FileNames: String);

Remarks

Delete deletes one or more files from an existing archive, without reprocessing the compressed data. The archive will be opened immediately, and the file(s) will immediately be removed permanently from the archive.

Note that with the Jar component Delete may be used to delete the manifest. Although this is allowed, an exception will be fired after the deletion is complete. The exception may be caught and ignored, or Append may be then used to replace the manifest.

The list of filenames should be specified exactly as when calling Extract:

Filenames may be set to one or more filenames or directory names. Files may be specified with or without a path, and with or without wildcards. If a path is specified, files in the indicated directory will be affected; subdirectories will be recursed into if RecurseSubdirectories is true. If no path is specified but wildcards are, matching files in all directories will be affected. If a single filename without a path is specified, it must correspond exactly to the appropriate value of CompressedName.

Directories should end with a slash ('/'). If a directory is specified, all files and subdirectories in the specified directory will be affected.

A pipe character ('|') should be used to separate multiple file or directory names. Alternatively, the method may be invoked repeatedly.

The ExcludedFiles property may be used to further limit the files to be deleted. When Delete is used to delete a directory or match wildcards, each file to be deleted is first compared against ExcludedFiles, and any files marked as excluded will not be deleted. When Delete is used to delete a single file, the value of ExcludedFiles will be ignored.

When the method is invoked, the Scan method will first be invoked, if it has not been invoked already. Note that if IncludeFiles has been invoked, or if the values of CompressedName and DecompressedName for each file in the Files collection have been set, this information will be reset by the call to Scan.

When deleting multiple files, the component will operate most efficiently if all filenames are passed to Delete in a single invocation of the method. Invoking Delete repeatedly on large archives is not recommended.

Invoking Delete will only remove files from ArchiveFile; it will not delete the files from the disk.

Example

ZipControl.ArchiveFile = "c:\\test.zip" ZipControl.Delete("default_readme.txt"); ZipControl.Append("\\mydir\\my_readme.txt", "my_readme.txt")

Extract Method (Jar Component)

Extracts a single file, directory, or group of files, from the archive.

Syntax

procedure Extract(FileNames: String);

Remarks

Extract extracts one or more files from the archive. The file(s) will be extracted to the directory specified by ExtractToPath, and given the names found in the archive or specified by the DecompressedName of the file in the Files collection.

Filenames may be set to one or more filenames or directory names. Files may be specified with or without a path, and with or without wildcards. If a path is specified, files in the indicated directory will be affected; subdirectories will be recursed into if RecurseSubdirectories is true. If no path is specified but wildcards are, matching files in all directories will be affected. If a single filename without a path is specified, it must correspond exactly to the appropriate value of CompressedName.

Directories should end with a slash ('/'). If a directory is specified, all files and subdirectories in the specified directory will be affected.

A pipe character ('|') should be used to separate multiple file or directory names. Alternatively, the method may be invoked repeatedly.

The ExcludedFiles property may be used to further limit the files to be extracted. When Extract is used to extract a directory or match wildcards, each file to be extracted is first compared against ExcludedFiles, and any files marked as excluded will not be extracted. When Extract is used to extract a single file, the value of ExcludedFiles will be ignored.

To extract all files in the archive, the ExtractAll method may be used.

The BeginFile and EndFile events will be fired before and after each file is extracted, and the Progress event will be fired as the data is extracted. If WriteToProgressEvent is set to true, the decompressed data will be streamed out through the Progress event.

Example

ZipControl.ArchiveFile = "c:\test.tar" ZipControl.ExcludedFiles = "*.bak | backup/" ZipControl.ExtractToPath = "c:\temp" ZipControl.Extract("*") Example ZipControl.ArchiveFile = "c:\test.zip" ZipControl.ExcludedFiles = "" ZipControl.ExtractToPath = "c:\temp" ZipControl.Extract("code/") Example ZipControl.ArchiveFile = "c:\test.jar" ZipControl.ExcludedFiles = "*.txt" ZipControl.ExtractToPath = "c:\" ZipControl.Extract("* | docs/readme.txt")

ExtractAll Method (Jar Component)

Extracts all files from the compressed archive.

Syntax

procedure ExtractAll();

Remarks

ExtractAll extracts all files from the archive. The file(s) will be extracted to the directory specified by ExtractToPath, and given the names found in the archive or specified by the DecompressedName field of the file in the Files collection.

If Scan has not been invoked when ExtractAll is called, Scan will automatically be invoked, and the Files collection will be set to the values found in the archive. To manually set the decompressed filenames, Scan should be invoked before setting the DecompressedName field.

Invoking this method is equivalent to setting ExcludedFiles to the empty string, and then invoking Extract with '*' as the argument. Calling this method will cause the ExcludedFiles property to be ignored; to extract all files except those specified by ExcludedFiles, call the Extract method with the wildcard "*" as the method parameter instead of calling this method.

The BeginFile and EndFile events will be fired before and after each file is extracted, and the Progress event will be fired as the data is extracted. If WriteToProgressEvent is set to true, the decompressed data will be streamed out through the Progress event.

Example (Extracting from an Archive)

ZipControl.ArchiveFile = "c:\temp.zip" ZipControl.ExtractToPath = "c:\extracted\" ZipControl.ExtractAll()

IncludeFiles Method (Jar Component)

Specifies that the indicated files should be added to the archive.

Syntax

procedure IncludeFiles(FileNames: String);

Remarks

IncludeFiles may be used before Compress, to specify the files to be compressed. Invoking this method populates the Files collection accordingly.

Invoking the method does not create or alter the archive.

The argument should be a pipe ("|") -delimited sequence of one or more filenames. The filenames should be specified with paths if necessary, so that the files may be found on the local file system. The filenames will be stored as is in the DecompressedName field, and without a pathname in the CompressedName field of the Files collection.

Filenames may include the wildcards '?', '*', and '[ .. ]'. '?' will match any single character, and '*' will match an arbitrary sequence of characters. '[ .. ]' may be used to match any of the characters inside, or a range, such as '[a-z]'. A '\' can be used to escape wildcard characters.

If wildcards are specified, the file system will be scanned and all files matching the specified mask will be added. Moreover, subdirectories will be recursed into if RecurseSubdirectories is set to true. When recursing into subdirectories, relative path information will be stored in CompressedName field of the Files collection.

The ExcludedFiles may be used to limit the files to be compressed. This property is checked when Compress is invoked, rather than when IncludeFiles is invoked, so this property may be set before or after invoking IncludeFiles.

Note that invoking IncludeFiles will not reset the component, or remove old values of CompressedName and DecompressedName. This may be done by first clearing the Files collection.

Example

ZipControl.IncludeFiles("c:\test\* | c:\readme") ZipControl.ExcludedFiles = "*.tmp" ZipControl.Compress()

Reset Method (Jar Component)

Resets the component.

Syntax

procedure Reset();

Remarks

Reset resets the state of the component. The Files collection will be cleared, all properties will be set to their default values, and any files open will be closed.

Scan Method (Jar Component)

Scans the compressed archive.

Syntax

procedure Scan();

Remarks

This method will scan the archive specified by ArchiveFile. The number of files and their names and sizes will be determined and written to the Files collection.

After scanning the archive, the values of DecompressedName may be changed if desired, and any number of files may be decompressed. The Extract method allows you to decompress files of your choice, and the ExtractAll method will decompress the entire archive.

Changing the values of the CompressedName field or the number of files in the Files collection will invalidate the scan. If either of these is changed and Extract or ExtractAll is then called; Scan will automatically be called again, and these values will be reset to their original values.

Calling this method will frequently generate a trappable error if the archive is corrupt. This is not guaranteed, however, as Scan only examines the headers.

Example

Dim i As Integer ZipControl.ArchiveFile = "c:\temp.zip" ZipControl.Scan For i = 0 To ZipControl.FileCount - 1 Debug.Print "File Name: " & ZipControl.FileDecompressedName(i) Debug.Print "File Size: " & ZipControl.FileDecompressedSize(i) Next i

SetArchiveInputStream Method (Jar Component)

The stream to read the zip, tar, jar, or gzip archive from.

Syntax

procedure SetArchiveInputStream(ArchiveStream: TStream);

Remarks

This method should be set when the archive is to be read from a stream when Extract is called.

By default, and when this is set to null, the component will read from the file specified by ArchiveFile. However, when this is a valid stream, the data will be read from the stream.

SetArchiveOutputStream Method (Jar Component)

The stream to write the zip, tar, jar, or gzip archive to.

Syntax

procedure SetArchiveOutputStream(ArchiveStream: TStream);

Remarks

This method should be set when the archive is to be written to a stream when Compress is called.

By default, and when this is set to null, the component will write to the file specified by ArchiveFile. However, when this is a valid stream, the data will be written to the stream.

BeginFile Event (Jar Component)

Fired before each file is processed.

Syntax

type TBeginFileEvent = procedure (
  Sender: TObject;
  Index: Integer;
  var Skip: Boolean
) of Object;

property OnBeginFile: TBeginFileEvent read FOnBeginFile write FOnBeginFile;

Remarks

BeginFile is fired before each file is processed by the compressor or decompressor, as appropriate. Index contains the array index of the file about to be processed, and the CompressedName, DecompressedName, CompressedSize (decompression only), and DecompressedSize fields of the Files collection for this index contain more detailed information about the file about to be processed.

When extracting, an alternate location may be specified by trapping the event, and modifying DecompressedName and/or ExtractToPath. If DecompressedName is set to an empty string, the file will not be written to disk. If WriteToProgressEvent is true, the file will still be decompressed, and the data may be extracted through the Progress event.

This event may also be trapped while compressing. CompressedName and DecompressedName may be changed.

You may set the Skip parameter to true in order to skip the file completely while compressing or extracting.

EndFile Event (Jar Component)

Fired after each file is processed.

Syntax

type TEndFileEvent = procedure (
  Sender: TObject;
  Index: Integer
) of Object;

property OnEndFile: TEndFileEvent read FOnEndFile write FOnEndFile;

Remarks

EndFile is fired after each file is processed by the compressor or decompressor, as appropriate. Index contains the array index of the file processed, and the CompressedName, DecompressedName, CompressedSize, and DecompressedSize fields in the Files collection for this index contain more detailed information about the file processed.

Error Event (Jar Component)

Information about non-fatal errors.

Syntax

type TErrorEvent = procedure (
  Sender: TObject;
  const Description: String;
  ErrorCode: Integer;
  Index: Integer;
  const Filename: String;
  var Ignore: Boolean
) of Object;

property OnError: TErrorEvent read FOnError write FOnError;

Remarks

The Error event is fired when non-fatal errors occur during compression or decompression. Note that if this event is fired during decompression this may indicate that the archive is corrupt.

By default these errors will cause the component to fail with an exception. The exception may be overridden by setting Ignore to true. This will cause the error to be ignored, the file will be skipped if necessary, and the component will continue operation.

ErrorCode will correspond to one of the following errors:

1Bad or missing CRC-32 checksum.
2Failed to set creation date of a file.
111Can't open file for read (skipping).

Description contains a textual description of the error. Index and Filename contain the array index (where appropriate) and filename of the file being processed at the time of the error.

Overwrite Event (Jar Component)

Fired whenever a file exists and may be overwritten.

Syntax

type TOverwriteEvent = procedure (
  Sender: TObject;
  var Filename: String;
  var Overwrite: Boolean
) of Object;

property OnOverwrite: TOverwriteEvent read FOnOverwrite write FOnOverwrite;

Remarks

Overwrite is fired when a file is about to be overwritten, and would overwrite an existing file. The event is fired during decompression.

Filename contains the full name of the file, specified with its pathname.

Overwrite specifies whether or not the file will be overwritten. For Zip, Jar, and Tar, this is equal by default to the value of the OverwriteFiles property. For Gzip, this value defaults to true.

Either of the parameters may be changed when the event is fired. Changing the value of Overwrite will override the default behavior of the component, and cause the file to be overwritten or not overwritten, depending on the value set. If Filename is changed, the value of Overwrite will be ignored, and the file will be written with the specified name. If a file of the new name also exists this file will be silently overwritten.

Progress Event (Jar Component)

Fired as progress is made.

Syntax

type TProgressEvent = procedure (
  Sender: TObject;
  const Data: String;
  const DataB: TBytes;
  const Filename: String;
  BytesProcessed: Int64;
  PercentProcessed: Integer
) of Object;

property OnProgress: TProgressEvent read FOnProgress write FOnProgress;

Remarks

The Progress event is automatically fired as compression or decompression is performed. When WriteToProgressEvent is true, the output data is provided through the Data parameter, allowing for it to be streamed out.

Filename contains the name of the file being written. If no file is being written, Filename will contain an empty string, and the output data will be provided exclusively through this event.

BytesProcessed contains the total number of uncompressed bytes processed. PercentProcessed contains the percent of uncompressed bytes processed, corresponding roughly to the running time of the operation.

For Gzip extraction only, BytesProcessed and PercentProcessed will reflect the number of compressed bytes extracted, as it is generally impossible to predetermine the total uncompressed size.

If WriteToProgressEvent is false, Data will contain null.

JARFile Type

The Jar file in the archive.

Remarks

This type contains information about the Jar file that either exists in the archive or is being added to the archive.

The following fields are available:

Fields

CompressedDate
Int64

Default Value: 0

The date and time of the entry, as stored within the archive.

FileCompressedDate contains the last modified date of the file, as stored within the archive (it does not generally correspond to when the file was compressed).

FileCompressedDate is returned in a platform-specific format. The Java,C++, and most other Editions will return the number of milliseconds since January 1, 1970, 00:00:00. This value may be passed directly to the java.util.Date constructor to create a java.util.Date object representing this date.

The .NET Edition will return the number of ticks, or 100-nanosecond intervals, since January 1, 0001, 00:00:00. This value may be passed directly to the System.DateTime constructor to create a System.DateTime object representing this date.

Reading the value of this property will return a meaningful value only after the archive has been successfully scanned or decompressed, and only if the values of ArchiveFile, Files collection, and CompressedName have not been changed since. If a meaningful value is not available this property will return a value of 0.

NOTE: This may be set accordingly when the InputStream property is set to a valid stream to input the data for the current file. If not set, the default, 0, is used. Otherwise the value is read from disk.

CompressedName
String

Default Value: ""

The file name of the current file, as stored inside of the archive. This may be the same as in DecompressedName, but is not required to be.

All paths are stored in the archive in standard (UNIX) format. Pathnames specified in the host operating system's format will be immediately converted.

This field should generally be set with a relative path or with no path at all. The exact interpretation of the path is left to the decompression software; generally, pathnames will be interpreted as relative to a base directory, and these subdirectories will be created as needed. Absolute pathnames (paths beginning with a / character) will not be interpreted correctly by the component, and may or may not be interpreted correctly by other decompression software.

Paths should be specified in standard (UNIX) format. They may also be specified in the format native to the host operating system, in which case they will be immediately converted.

Example

ZipControl.ArchiveFile = "c:\test.zip" ZipControl.Files.Add(new ZIPFile()) ZipControl.Files[0].DecompressedName = "c:\test\ipworkszip\temp\test.txt" ZipControl.Files[0].CompressedName = "readme.txt" ZipControl.Compress()

CompressedSize
Int64 (read-only)

Default Value: -1

The size of the compressed data, as compressed within the archive. Headers, footers, etc., are not included in the size.

Reading the value of this property will return a meaningful value only after the archive has been compressed, scanned, or decompressed, and only if the values of ArchiveFile, or Files have not been changed since. If a meaningful value is not available this property will return a value of -1.

DecompressedName
String

Default Value: ""

The name of the file in the archive, as stored on the file system, outside the archive.

When compressing files, This property should be specified with a path, if necessary, to allow the file to be found by the component. If the file cannot be found during compression, a trappable error will be generated, and the archive will not be correctly written.

When decompressing files, the property indicates where the file should be written. After the archive is scanned, the values of CompressedName and DecompressedName will be set to the exact filenames found in the archive. The value of DecompressedName may then be changed if desired.

If DecompressedName is set to an empty string before extraction, the file will not be written to disk at all. It will still be written to the Progress event if WriteToProgressEvent is set to true.

If DecompressedName is set to an empty string before compression, the file will be skipped, and not written to the archive.

A base path for decompression may be specified by setting the ExtractToPath property. If ExtractToPath is set to a non-empty string, the files will be decompressed to the directory specified in ExtractToPath. If the value of DecompressedName contains a pathname it will be regarded as relative to ExtractToPath.

Paths on the local file system should be specified in the format native to the host operating system. They may also be specified in standard (UNIX) format, in which case they will be immediately converted.

Example

ZipControl.ArchiveFile = "c:\test.tar" ZipControl.Scan() ZipControl.ExtractToPath = "c:\temp\" ZipControl.Files[1].DecompressedName = "test\temp.out" ZipControl.Extract(ZipControl.Files[1].CompressedName) Incorrect Example ZipControl.ExtractToPath = "c:\temp\" ZipControl.Files[1].DecompressedName = "c:\temp\test\temp.out" 'The file would be extracted to c:\temp\c:\temp\test\temp.out

DecompressedSize
Int64 (read-only)

Default Value: -1

The size of the file, as decompressed outside the archive. If an archive is open for read (i.e. has been scanned or decompressed), this information will be read from the archive headers. If an archive is not open for read, the component will retrieve the information for the corresponding value of DecompressedName from the local file system.

A value of -1 will be returned in case of an I/O error.

InputData
String

Default Value: ""

When This property is set, the component will read in the data from This property instead of reading from the file contained in the DecompressedName property.

InputDataB
TBytes

Default Value: ""

When This property is set, the component will read in the data from This property instead of reading from the file contained in the DecompressedName property.

InputStream
TStream

Default Value: ""

When this property is set to a valid stream, the component will read in the data from the stream as the current file instead of reading from the file contained in the DecompressedName property.

Constructors

constructor Create();
constructor Create(valDecompressedName: String);
constructor Create(valCompressedName: String; valDecompressedName: String);

Config Settings (Jar Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

Jar Config Settings

CheckForFileLocks:   If true, the component requests an exclusive lock during initialization.

If set to true, the component will request an exclusive lock during initialization to ensure there are no other processes locking a file. This is a temporary lock and is released before work is done. This is especially useful when another process has a partial lock on a file, for instance when Outlook is working with a .pst.

False by default.

ExcludedAttributes:   Attributes of files to be excluded.

Files with attributes matching those specified will be excluded from compression or decompression. May be set to any combination of H (hidden), S (system), A (archive), and R (read-only). (Example: "HSR") Alternatively, may be set to a bitmask of the following flags: Readonly (1), Hidden (2), System (4), Directory (16), Archive (32).

For Java, when compressing, attributes other than "H" and "R" will be ignored (due to JRE limitations).

Default: "" (no excluded attributes)

ExtractFilesOnly:   Whether to only extract the files contained within the archive.

If true, only the files contained within the ArchiveFile are extracted directly to the specified ExtractToPath. Folders contained within the ArchiveFile will not be created within the ExtractToPath. If an archive contains files with the same name, you can control whether or not they get overwritten by setting OverwriteFiles.

FileNamesCaseSensitive:   This config controls the case-sensitivity of the component when working with filenames.

Set this to a value from below to control whether the component is case-sensitive when working with filenames.

0Case-Insensitive
1Case-Sensitive
2Automatic (Default)

The default behavior is Automatic. The component will use the system behavior.

OverwriteReadonlyFiles:   Whether to overwrite readonly files.

If true, the component will overwrite readonly files when decompressing. If false (the default), the component will fire the Error event, instead, and will fail with an exception if the error is not trapped and explicitly ignored in the event.

WriteToProgressEvent:   Whether or not to write data to the Progress Event.

If WriteToProgressEvent is set to true, then all data produced through invocations of Extract, ExtractAll, and Compress will be written to the Progress event as well as to disk. Applications may stream out the compressed or decompressed data by trapping this event and copying the data.

If WriteToProgressEvent is set to false, the data will not be streamed out, and the Data parameter of the Progress event will contain null.

By default, this config is set to false.

Base Config Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage:   The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

IdentifierName
037IBM EBCDIC - U.S./Canada
437OEM - United States
500IBM EBCDIC - International
708Arabic - ASMO 708
709Arabic - ASMO 449+, BCON V4
710Arabic - Transparent Arabic
720Arabic - Transparent ASMO
737OEM - Greek (formerly 437G)
775OEM - Baltic
850OEM - Multilingual Latin I
852OEM - Latin II
855OEM - Cyrillic (primarily Russian)
857OEM - Turkish
858OEM - Multilingual Latin I + Euro symbol
860OEM - Portuguese
861OEM - Icelandic
862OEM - Hebrew
863OEM - Canadian-French
864OEM - Arabic
865OEM - Nordic
866OEM - Russian
869OEM - Modern Greek
870IBM EBCDIC - Multilingual/ROECE (Latin-2)
874ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875IBM EBCDIC - Modern Greek
932ANSI/OEM - Japanese, Shift-JIS
936ANSI/OEM - Simplified Chinese (PRC, Singapore)
949ANSI/OEM - Korean (Unified Hangul Code)
950ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026IBM EBCDIC - Turkish (Latin-5)
1047IBM EBCDIC - Latin 1/Open System
1140IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141IBM EBCDIC - Germany (20273 + Euro symbol)
1142IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144IBM EBCDIC - Italy (20280 + Euro symbol)
1145IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147IBM EBCDIC - France (20297 + Euro symbol)
1148IBM EBCDIC - International (500 + Euro symbol)
1149IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201Unicode UCS-2 Big-Endian
1250ANSI - Central European
1251ANSI - Cyrillic
1252ANSI - Latin I
1253ANSI - Greek
1254ANSI - Turkish
1255ANSI - Hebrew
1256ANSI - Arabic
1257ANSI - Baltic
1258ANSI/OEM - Vietnamese
1361Korean (Johab)
10000MAC - Roman
10001MAC - Japanese
10002MAC - Traditional Chinese (Big5)
10003MAC - Korean
10004MAC - Arabic
10005MAC - Hebrew
10006MAC - Greek I
10007MAC - Cyrillic
10008MAC - Simplified Chinese (GB 2312)
10010MAC - Romania
10017MAC - Ukraine
10021MAC - Thai
10029MAC - Latin II
10079MAC - Icelandic
10081MAC - Turkish
10082MAC - Croatia
12000Unicode UCS-4 Little-Endian
12001Unicode UCS-4 Big-Endian
20000CNS - Taiwan
20001TCA - Taiwan
20002Eten - Taiwan
20003IBM5550 - Taiwan
20004TeleText - Taiwan
20005Wang - Taiwan
20105IA5 IRV International Alphabet No. 5 (7-bit)
20106IA5 German (7-bit)
20107IA5 Swedish (7-bit)
20108IA5 Norwegian (7-bit)
20127US-ASCII (7-bit)
20261T.61
20269ISO 6937 Non-Spacing Accent
20273IBM EBCDIC - Germany
20277IBM EBCDIC - Denmark/Norway
20278IBM EBCDIC - Finland/Sweden
20280IBM EBCDIC - Italy
20284IBM EBCDIC - Latin America/Spain
20285IBM EBCDIC - United Kingdom
20290IBM EBCDIC - Japanese Katakana Extended
20297IBM EBCDIC - France
20420IBM EBCDIC - Arabic
20423IBM EBCDIC - Greek
20424IBM EBCDIC - Hebrew
20833IBM EBCDIC - Korean Extended
20838IBM EBCDIC - Thai
20866Russian - KOI8-R
20871IBM EBCDIC - Icelandic
20880IBM EBCDIC - Cyrillic (Russian)
20905IBM EBCDIC - Turkish
20924IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932JIS X 0208-1990 & 0121-1990
20936Simplified Chinese (GB2312)
21025IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027Extended Alpha Lowercase
21866Ukrainian (KOI8-U)
28591ISO 8859-1 Latin I
28592ISO 8859-2 Central Europe
28593ISO 8859-3 Latin 3
28594ISO 8859-4 Baltic
28595ISO 8859-5 Cyrillic
28596ISO 8859-6 Arabic
28597ISO 8859-7 Greek
28598ISO 8859-8 Hebrew
28599ISO 8859-9 Latin 5
28605ISO 8859-15 Latin 9
29001Europa 3
38598ISO 8859-8 Hebrew
50220ISO 2022 Japanese with no halfwidth Katakana
50221ISO 2022 Japanese with halfwidth Katakana
50222ISO 2022 Japanese JIS X 0201-1989
50225ISO 2022 Korean
50227ISO 2022 Simplified Chinese
50229ISO 2022 Traditional Chinese
50930Japanese (Katakana) Extended
50931US/Canada and Japanese
50933Korean Extended and Korean
50935Simplified Chinese Extended and Simplified Chinese
50936Simplified Chinese
50937US/Canada and Traditional Chinese
50939Japanese (Latin) Extended and Japanese
51932EUC - Japanese
51936EUC - Simplified Chinese
51949EUC - Korean
51950EUC - Traditional Chinese
52936HZ-GB2312 Simplified Chinese
54936Windows XP: GB18030 Simplified Chinese (4 Byte)
57002ISCII Devanagari
57003ISCII Bengali
57004ISCII Tamil
57005ISCII Telugu
57006ISCII Assamese
57007ISCII Oriya
57008ISCII Kannada
57009ISCII Malayalam
57010ISCII Gujarati
57011ISCII Punjabi
65000Unicode UTF-7
65001Unicode UTF-8
The following is a list of valid code page identifiers for Mac OS only:
IdentifierName
1ASCII
2NEXTSTEP
3JapaneseEUC
4UTF8
5ISOLatin1
6Symbol
7NonLossyASCII
8ShiftJIS
9ISOLatin2
10Unicode
11WindowsCP1251
12WindowsCP1252
13WindowsCP1253
14WindowsCP1254
15WindowsCP1250
21ISO2022JP
30MacOSRoman
10UTF16String
0x90000100UTF16BigEndian
0x94000100UTF16LittleEndian
0x8c000100UTF32String
0x98000100UTF32BigEndian
0x9c000100UTF32LittleEndian
65536Proprietary

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
  • Last Valid Build: The last valid build number for which the license will work.
MaskSensitiveData:   Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to True to mask sensitive data. The default is True.

This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseInternalSecurityAPI:   Whether or not to use the system security libraries or an internal implementation.

When set to False, the component will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to True tells the component to use the internal implementation instead of using the system security libraries.

This setting is set to False by default on all platforms.

Trappable Errors (Jar Component)

Errors

The following errors may be generated by the component. Note that frequently the error message will contain more specific information than what is listed here.

Note that some non-fatal errors may be trapped and explicitly ignored in the Error event. This will allow the component to continue operation even in case of error.

Jar Errors

104   The jar archive is of an invalid or unsupported format.
111   Can't open file for read.
112   Can't open file for write.
113   Can't create directory.
114   The file is too large.
115   Can't create empty archive.
116   The archive must be scanned prior to attempting this operation.
117   The array index is out of range.
118   The maximum size of the archive has been exceeded.
119   The archive must be specified, or streaming must be enabled.
120   The component is busy.
124   Must specify the compressed name.
127   Bad CRC-32 checksum.
128   Unable to set file date.
133   File already exists in the archive.
150   An I/O error has occurred (details follow).