When rejecting a file from within the AcceptFile event if this setting is set to True the class will send a retry indicator value to the client to specify the file may be retried later. This should be set from within the AcceptFile event. For instance: component.Config("AllowRetry[" + e->ConnectionId + "]"); When set to False (default) the component will send a value indicating the client should not retry the send operation.

By default the class will send a CD command after sending an asynchronous EERP and getting back a RTR (Ready to Receive) response. This gives control of the connection back to the client. If sending multiple asynchronous EERPs set this to False. After sending all of the EERPs use the ChangeDirection method to explicitly change the speaker for the connection if desired.

The name of the certificate store. This is used when specifying an alternative Certificate for the specified connection.

The CertificateStoreType specifies the type of the certificate store specified by CertificateStore. If the store is password protected, specify the password in CertificateStorePassword.

CertificateStore is used in conjunction with the CertificateSubject field in order to specify the certificate.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

If the certificate store is of a type that requires a password, this property is used to specify that password in order to open the certificate store. This is used when specifying an alternative Certificate for the specified connection.

This specifies the type of certificate store. This is used when specifying an alternative Certificate for the specified connection. Possible values are:

The subject of the certificate. This is used when specifying an alternative Certificate for the specified connection.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

By default the class will use the certificate set in the Certificate property for all operations that require a certificate. This setting allows for different certificates to be set for specific operations. First, specify the CertificateType via this setting and then set the Certificate property. For instance: component.Config("CertificateType=3"); component.Certificate = mySigningCertificate; Possible values are:

By default the class will use the alternate certificate specified by the CertificateSubject setting for all operations that require a certificate. This setting allows for different certificates to be set for specific operations. First, specify the CertificateType via this setting and then set the Certificate* configuration settings. For instance: component.Config("CertificateType[ConnectionId]=3"); component.Config("CertificateStoreType[ConnectionId]=2"); component.Config("CertificateStore[ConnectionId]=C:\\mycert.pfx"); component.Config("CertificateStorePassword[ConnectionId]=password"); component.Config("CertificateSubject[ConnectionId]=*"); Possible values are:

Specifies the type of connection that is created. The default value is 0 (Both) in which the class can both send and receive files. However you can limit the class to only be able to send or receive files by specifying a value of 1 (Send Only) or 2 (Receive Only).

This may be set within the AcceptConnection event. It only applies to the connection parameters sent by the server to the client. It does not return the value sent by the client to the server. Valid values are:

This setting defines the maximum credit value to be sent in the initial connection (SSID command). The default value is 99 and the maximum value is 999. This setting may be used within the AcceptConnection event. Querying this setting inside the event will return the value provided by the connecting client. You may set this value within the event to specify the credit count that will be sent to the client.

When establishing a connection the smaller of the two values provided by the client and the server will be used. This setting may also be queried after a connection is established to determine the negotiated value.

For instance: string receivedCreditCount = component.Config("CreditCount[" + e->ConnectionId + "]"); component.Config("CreditCount[" + e->ConnectionId + "]=55");

This property specifies the idle timeout (in seconds) for clients. When set to a positive value the class will disconnect idle clients after the specified timeout.

This only applies to clients that have not sent or received data within DefaultIdleTimeout seconds.

If set to 0 (default) no idle timeout is applied.

Note: DoEvents must be called in order for the class to check existing connections.

The receipt hash algorithm specified in this setting is sent to the receiving party when a file is sent, and the receiving party should use this value when calculating the hash returned in the EERP or NERP receipt. Possible values are:

By default this value is True. When set to False and receiving a file, if the file is encrypted, signed, or compressed the file will be decrypted, verified, or decompressed. If there is an error during processing the original unprocessed file will be placed in DownloadDirectory. In that case you may choose what to do with the file based on the error reported during processing.

When this is set to True (default) and there is an error during processing the original unprocessed file will be deleted and no files will be placed in DownloadDirectory.

By default when Logoff is called the class will close the TCP connection after ending the session (the ESID command is sent). To let the other side close the connection after it has received the end session command (ESID), set this to False.

This setting defines the data exchange buffer size to be sent in the initial connection (SSID command) in bytes. The default value is 2048. This setting may be used within the AcceptConnection event. Querying this setting inside the event will return the value provided by the connecting client. You may set this value within the event to specify the data exchange buffer size that will be sent to the client.

When establishing a connection the smaller of the two values provided by the client and the server will be used. This setting may also be queried after a connection is established to determine the negotiated value.

For instance: string receivedExchangeBufferSize = component.Config("ExchangeBufferSize[" + e->ConnectionId + "]"); component.Config("ExchangeBufferSize[" + e->ConnectionId + "]=1024");

This specifies the certificate store type when loading a certificate that will be sent to the remote party. This is only applicable when calling ExchangeCertificate. The default value is "8" which indicates the certificate will be loaded from a file on disk. When the certificate is not in a .cer format or is located in the Windows certificate store this setting should be set to the appropriate value before calling ExchangeCertificate.

For a list of possible values please see CertStoreType. Also see ExchangeCertSubject.

This specifies the subject of the certificate being exchanged. This will be used to load the appropriate certificate when ExchangeCertificate is called. This is used in conjunction with ExchangeCertStoreType and is only necessary when loading a certificate from a store that may hold more than one certificate (such as a Windows certificate store).

When TrustedCerts is populated the class will validate that loaded certificates were issued by a trusted CA in TrustedCerts. This setting controls the behavior when an untrusted certificate is found. By default this value is True and the class will throw an exception. If this is set to False the class will fire the Error event but the error will not be fatal and the operation will be allowed to continue.

When sending a file this setting may be set to specify additional information. There is no restriction on the type of data supplied here. It may be set to a longer filename, or simply additional text data that you wish to pass to the receiver. The data supplied will be UTF-8 encoded by the class. The maximum length is 999 bytes (after UTF-8 encoding). This setting is only applicable when sending files.

For instance: component.Config("FileDescription[myConnectionId]=My File Description"); To obtain the FileDescription when receiving files use ReceivedFileDescription[ConnectionId]; instead.

The file hash algorithm specified in this setting is used to calculate the hash sent along with an outgoing file. Possible values are:

If set to True (default) the class will fire the EndResponse event for both sent and received end responses. If set to False the EndResponse event will fire only for received (incoming) end responses. The Direction parameter of EndResponse determines if the end response is being sent or received. The default value is True.

When TrustedCertsData holds a URL and ImportTrustedCerts is called the class makes a HTTP request to obtain the trusted certificates. If the server returns a HTTP redirect this setting specifies how the class will handle it. Possible values are:

This setting effects the content of the Data parameter of the PITrail event. By default this setting is true and a format designed to be more easily read is used. If set to false the Data parameter will hold the raw unformatted protocol level content.

This field is similar to DefaultIdleTimeout but may be set on a per-connection basis to override DefaultIdleTimeout. This field specifies the idle timeout (in seconds) for the connected client. When set to a positive value the component will disconnect idle clients after the specified timeout. This only applies to clients that have not send to received data within the specified number of seconds. If set to 0 (default) no idle timeout is applied.

For instance: component.Config("IdleTimeout[" + e->ConnectionId + "]=1"); Note: DoEvents must be called in order for the class to check existing connections.

The default value is False. When True, KEEPALIVE packets are enabled (for long connections).

Please note that system TCP/IP stack implementations are not required to support SO_KEEPALIVE.

This property is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

When set to True, connections are terminated gracefully.

The default behavior (which is also the default mode for stream sockets) might result in an indefinite delay in closing the connection. Although the class returns control immediately, the system might indefinitely hold system resources until all pending data is sent (even after your application closes). This means that valuable system resources might be wasted.

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you have sent (by a client acknowledgment, for example), setting this property to False might be the appropriate course of action.

This property is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

This setting specifies the level of detail that is logged to the Log event. Possible values are:

This setting returns the connection type specified by the client. It may be queried to determine the type of connection requested by the client.

This setting returns the type of connection being created. This may be queried within the AcceptConnection event or any time after. It only applies to the connection parameters sent by the client to the server. Valid values are:

For instance: string receivedConnectionType = component.Config("ReceivedConnectionType[" + e->ConnectionId + "]");

This setting may be queried to obtain the datetime of the received file.

Query this setting after receiving a file to obtain any additional information provided by the client. The data will be UTF-8 decoded by the class.

For instance: string receivedFileDescription = component.Config("ReceivedFileDescription[" + e->ConnectionId + "]");

This setting may be queried inside the AcceptFile or EndTransfer events to obtain the encryption algorithm used by the client for encryption of the file being received. The possible values are:

This setting may be queried inside the EndTransfer event to obtain the name of the received file on disk. This includes the full path to the file on disk.

This setting specifies the format used when determining the local filename of a received file. The use of macros is supported to provide flexibility. This setting may include one or more of the following values:

• %VirtualFileName%
• %VirtualFileDate%
• %Originator%
• %Destination%
• %UserData%
• %CurrentTime%
• %GUID%

The '%VirtualFileDate%' macro also supports date formatting through the use of an optional DateTime format string. The format of the macro with the date format string included is:

• %VirtualFileDate:CustomFormat%

This setting specifies the format used when determining the local filename of a received file. The use of macros is supported to provide flexibility. This setting may include one or more of the following values:

• %VirtualFileName%
• %VirtualFileDate%
• %Originator%
• %Destination%
• %UserData%
• %CurrentTime%
• %GUID%

The '%VirtualFileDate%' macro also supports date formatting through the use of an optional DateTime format string. The format of the macro with the date format string included is:

• %VirtualFileDate:CustomFormat%

By default the class will use the certificate set in the RecipientCert property for all operations that require a certificate. This setting allows for different certificates to be set for specific operations. First, specify the RecipientCertificateType via this setting and then set the RecipientCert property. For instance: component.Config("RecipientCertificateType=3"); component.RecipientCert = mySignatureVerificationCertificate; Possible values are:

When sending files the recipient may reject the file for a number of reasons. The recipient may indicate that the operation can be re-attempted later. Query this setting after a send attempt was rejected to determine if the recipient allows retries. This setting will return either True or False.

This setting specifies the secure authentication requirements for connecting clients. Secure auth can be allowed, required, or disallowed. Possible values are:

When sending a file the recipient will respond with an EFPA once the file is received. Within this response is an indicator which tells the sender whether to issue a CD (Change Direction) command. The indicator is read by the class and a CD command is sent if requested. If a CD is not requested then no CD is sent.

When set to True, this overrides the default behavior and will always send a CD command regardless of whether the indicator is set in the EFPA.

This should only be set if there is a specific reason to do so. In most cases it is not necessary.

This setting may be used to override the default ServerPassword. This allows for different ServerPasswords to be used for different connected clients. This can be changed at any time, for instance within the AcceptConnection.

This setting may be used to override the default ServerSFIDCode when calling SendFile. This allows for different ServerSFIDCodes to be used for different connected clients. This can be changed at any time prior to calling SendFile. When receiving files this will be populated with the ServerSFIDCode received from the client.

This setting may be used to override the default ServerSSIDCode. This allows for different ServerSSIDCodes to be used for different connected clients. This can be set from within the AcceptConnection event.

Under certain conditions, the class will create temporary files before processing a file. The location of the temporary files is determined by this setting. Temporary files are created when sending a file to the client if any of the following conditions are true.

• ConnectionsCompress is true
• ConnectionsVirtualFileSecurityLevel is set to slEncrypted
• ConnectionsVirtualFileSecurityLevel is set to slSigned
• ConnectionsVirtualFileSecurityLevel is set to slEncryptedAndSigned

Note that ConnectionsVirtualFileSecurityLevel is only applicable when ConnectionsVersion is set to oftpVer20.

This configuration setting can be set with or without a ConnectionId specified. When the ConnectionId is specified, this will cause temporary files for that connection to be written to the specified directory. Otherwise, if no ConnectionId is specified, temporary files for all connections will be written to the given folder.

When ImportTrustedCerts is called it will attempt to import certificates from the location specified here. By default this is the URL provided by Odette (http://www.odette.org/TSL/TSL_OFTP2.XML). This is the live list of CA certificates hosted by Odette. This may also be set to an absolute file path to load certificates from an offline source, or a string value containing the trusted CA certificates.

This setting specifies the DateTime format used by the class when reporting the VirtualFileDate of received files. The default format is "MM/dd/yyyy HH:mm:ss".

When using OFTP v2.0 If the class is configured to respond to EERP and NERP messages asynchronously this should be set to the value "yyyyMMddHHmmssffff" or a similar format that includes the same level of accuracy. This is required to ensure that when calling SendEndResponse the value saved from within the EndTransfer event has the necessary data when sending a response.

This configuration setting defines a comma-separated list of host names or IPv4 addresses that may access the class. The wildcard character "*" is supported. The default value is "*" and all connections are accepted.

When a client connects, the client's address is checked against the list defined here. If there is no match, the ConnectionRequest event fires with an Accept value set to . If no action is taken within the ConnectionRequest event, the client will be disconnected.

If this is (default), the component will bind to the local port with the ExclusiveAddressUse option set, meaning that nothing else can bind to the same port. Also the component will not be able to bind to local ports that are already in use by some other instance, and attempts to do so will result in failure.

This configuration setting defines a comma-separated list of host names or IPv4 addresses that cannot access the class.The default value is "" and all connections are accepted.

When a client connects, the client's address is checked against the list defined here. If there is a match, the ConnectionRequest event fires with an Accept value set to . If no action is taken within the ConnectionRequest event, the client will not be connected.

This configuration setting specifies the inactivity (in seconds) to apply to incoming Secure Sockets Layer (SSL) connections. When set to a positive value, if the other end is unresponsive for the specified number of seconds, the connection will timeout. This is not applicable to the entire handshake. It is applicable only to the inactivity of the connecting client during the handshake if a response is expected and none is received within the timeout window. The default value is 0, and no connection-specific timeout is applied.

Note: This is applicable only to incoming SSL connections. This should be set only if there is a specific reason to do so.

This is the size of an internal queue in the Transmission Control Protocol (TCP)/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated, the InBufferSize reverts to its defined size. The same thing will happen if you attempt to make it too large or too small.

InBufferSize is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

A TCP keep-alive packet will be sent after a period of inactivity, as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. If this value is not specified here, the system default is 1 second. This setting is applicable to all connections.

Note: This value is not applicable in macOS.

By default, the operating system will determine the time a connection is idle before a TCP keep-alive packet is sent. If this value is not specified here, the system default is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds. This setting is applicable to all connections.

This is the maximum number of connections available. This property must be set before Listening is set to , and once set, it can no longer be changed for the current instance of the class. The maximum value for this setting is 100,000 connections. Use this setting with caution. Extremely large values may affect performance. The default value is 1000.

Note: Unix/Linux operating systems limit the number of simultaneous connections to 1024.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same thing will happen if you attempt to make it too large or too small.

OutBufferSize is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

When set to True, the socket will send all data that are ready to send at once. When set to False, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this configuration setting is set to False.

When set to 0 (default), the class will use IPv4 exclusively. When set to 1, the class will use IPv6 exclusively. When set to 2, the class will listen for both IPv4 and IPv6 connections. If IPv6 is not available on the system, only IPv4 will be used. The default value is 0. Possible values are as follows:

When SSLProvider is set to Internal, this configuration setting controls whether Secure Sockets Layer (SSL) packets should be logged. By default, this configuration setting is False, as it is useful only for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this configuration setting has no effect if SSLProvider is set to Platform.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g., 9d66eef0.0, 9d66eef0.1). OpenSSL recommends the use of the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by the following sequences:

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

Before, between, and after the certificate text is allowed, which can be used, for example, for descriptions of the certificates. Refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

This functionality is available only when the provider is OpenSSL.

By default, OpenSSL uses the device file "/dev/urandom" to seed the PRNG, and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

If set to True, the class will reuse the context if and only if the following criteria are met:

• The target host name is the same.
• The system cache entry has not expired (default timeout is 10 hours).
• The application process that calls the function is the same.
• The logon session is the same.
• The instance of the class is the same.

When SSLProvider is set to Internal, this configuration setting specifies one or more CA certificates to be included with the SSLCert property. Some servers or clients require the entire chain, including CA certificates, to be presented when performing SSL authentication. The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

This configuration setting specifies whether the class will check the Certificate Revocation List (CRL) specified by the server certificate. If set to 1 or 2, the class will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The class will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class .

When set to 0 (default), the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but it will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.

This configuration setting specifies whether the class will use OCSP to check the validity of the server certificate. If set to 1 or 2, the class will first obtain the Online Certificate Status Protocol (OCSP) URL from the server certificate's OCSP extension. The class will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation, the class .

When set to 0 (default), the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but it will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.

This minimum cipher strength is largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Note: This configuration setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this configuration setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList configuration setting.

This configuration setting is only applicable to server components (e.g., TCPServer) see SSLServerCACerts for client components (e.g., TCPClient). This setting can be used to optionally specify one or more CA certificates to be used when verifying the client certificate that is presented by the client during the SSL handshake when SSLAuthenticateClients is enabled. When verifying the client's certificate, the certificates trusted by the system will be used as part of the verification process. If the client's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the client's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

This configuration setting enables the cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform include the following: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include the following:

• CALG_3DES
• CALG_3DES_112
• CALG_AES
• CALG_AES_128
• CALG_AES_192
• CALG_AES_256
• CALG_AGREEDKEY_ANY
• CALG_CYLINK_MEK
• CALG_DES
• CALG_DESX
• CALG_DH_EPHEM
• CALG_DH_SF
• CALG_DSS_SIGN
• CALG_ECDH
• CALG_ECDH_EPHEM
• CALG_ECDSA
• CALG_ECMQV
• CALG_HASH_REPLACE_OWF
• CALG_HUGHES_MD5
• CALG_HMAC
• CALG_KEA_KEYX
• CALG_MAC
• CALG_MD2
• CALG_MD4
• CALG_MD5
• CALG_NO_SIGN
• CALG_OID_INFO_CNG_ONLY
• CALG_OID_INFO_PARAMETERS
• CALG_PCT1_MASTER
• CALG_RC2
• CALG_RC4
• CALG_RC5
• CALG_RSA_KEYX
• CALG_RSA_SIGN
• CALG_SCHANNEL_ENC_KEY
• CALG_SCHANNEL_MAC_KEY
• CALG_SCHANNEL_MASTER_HASH
• CALG_SEAL
• CALG_SHA
• CALG_SHA1
• CALG_SHA_256
• CALG_SHA_384
• CALG_SHA_512
• CALG_SKIPJACK
• CALG_SSL2_MASTER
• CALG_SSL3_MASTER
• CALG_SSL3_SHAMD5
• CALG_TEK
• CALG_TLS1_MASTER
• CALG_TLS1PRF

• TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
• TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
• TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
• TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
• TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
• TLS_RSA_WITH_AES_256_GCM_SHA384
• TLS_RSA_WITH_AES_128_GCM_SHA256
• TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
• TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
• TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
• TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
• TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
• TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
• TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
• TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
• TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
• TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
• TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
• TLS_RSA_WITH_AES_256_CBC_SHA256
• TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
• TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
• TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
• TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
• TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
• TLS_RSA_WITH_AES_128_CBC_SHA256
• TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
• TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
• TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
• TLS_RSA_WITH_AES_256_CBC_SHA
• TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
• TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
• TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
• TLS_DHE_RSA_WITH_AES_256_CBC_SHA
• TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
• TLS_DHE_DSS_WITH_AES_256_CBC_SHA
• TLS_RSA_WITH_AES_128_CBC_SHA
• TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
• TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
• TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
• TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
• TLS_DHE_RSA_WITH_AES_128_CBC_SHA
• TLS_DHE_DSS_WITH_AES_128_CBC_SHA
• TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
• TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
• TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
• TLS_RSA_WITH_3DES_EDE_CBC_SHA
• TLS_RSA_WITH_DES_CBC_SHA
• TLS_DHE_RSA_WITH_DES_CBC_SHA
• TLS_DHE_DSS_WITH_DES_CBC_SHA
• TLS_RSA_WITH_RC4_128_MD5
• TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols), only the following cipher suites are supported:

• TLS_AES_256_GCM_SHA384
• TLS_CHACHA20_POLY1305_SHA256
• TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

This configuration setting is used to enable or disable the supported security protocols.

Not all supported protocols are enabled by default. The default value is 4032 for client components, and 3072 for server components. To specify a combination of enabled protocol versions set this config to the binary OR of one or more of the following values:

Note that only TLS 1.2 is enabled for server components that accept incoming connections. This adheres to industry standards to ensure a secure connection. Client components enable TLS 1.0, TLS 1.1, and TLS 1.2 by default and will negotiate the highest mutually supported version when connecting to a server, which should be TLS 1.2 in most cases.

SSLEnabledProtocols: Transport Layer Security (TLS) 1.3 Notes:

By default when TLS 1.3 is enabled, the class will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions that are designed to run on Windows, SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is supported only on Windows 11/Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider), please be aware of the following notes:

• The platform provider is available only on Windows 11/Windows Server 2022 and up.
• SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
• If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2, these restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the class when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

This configuration setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This configuration setting is by default, but it can be set to to enable the extension.

This configuration setting is applicable only when SSLProvider is set to Internal.

This configuration setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True, all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

This configuration setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools, such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffic for debugging purposes. When writing to this file, the class will only append, it will not overwrite previous values.

Note: This configuration setting is applicable only when SSLProvider is set to Internal.

This configuration setting returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

This configuration setting returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

This configuration setting returns the cipher suite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

This configuration setting returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

This configuration setting returns the strength of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

This configuration setting returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

The following flags are defined (specified in hexadecimal notation). They can be ORed together to exclude multiple conditions:

This functionality is currently not available when the provider is OpenSSL.

This configuration setting is only used by client components (e.g., TCPClient) see SSLClientCACerts for server components (e.g., TCPServer). This configuration setting can be used to optionally specify one or more CA certificates to be used when connecting to the server and verifying the server certificate. When verifying the server's certificate, the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

This configuration setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the class will verify that the server certificate signature algorithm is among the values specified in this configuration setting. If the server certificate signature algorithm is unsupported, the class .

The format of this value is a comma-separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this configuration setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

To not restrict the server's certificate signature algorithm, specify an empty string as the value for this configuration setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1" (default)

This configuration setting specifies a comma-separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional roundtrip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result, only some groups are included by default in this configuration setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used that is not present in this list, it will incur an additional roundtrip and time to generate the key share for that group.

In most cases, this configuration setting does not need to be modified. This should be modified only if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

• "ecdhe_x25519" (default)
• "ecdhe_x448"
• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1"
• "ffdhe_2048" (default)
• "ffdhe_3072" (default)
• "ffdhe_4096"
• "ffdhe_6144"
• "ffdhe_8192"

This configuration setting holds a comma-separated list of allowed signature algorithms. Possible values include the following:

• "ed25519" (default)
• "ed448" (default)
• "ecdsa_secp256r1_sha256" (default)
• "ecdsa_secp384r1_sha384" (default)
• "ecdsa_secp521r1_sha512" (default)
• "rsa_pkcs1_sha256" (default)
• "rsa_pkcs1_sha384" (default)
• "rsa_pkcs1_sha512" (default)
• "rsa_pss_sha256" (default)
• "rsa_pss_sha384" (default)
• "rsa_pss_sha512" (default)

This configuration setting specifies a comma-separated list of named groups used in TLS 1.3 for key exchange. This configuration setting should be modified only if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

• "ecdhe_x25519" (default)
• "ecdhe_x448" (default)
• "ecdhe_secp256r1" (default)
• "ecdhe_secp384r1" (default)
• "ecdhe_secp521r1" (default)
• "ffdhe_2048" (default)
• "ffdhe_3072" (default)
• "ffdhe_4096" (default)
• "ffdhe_6144" (default)
• "ffdhe_8192" (default)

When queried, this setting will return a string containing information about the product's build.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

• Product: The product the license is for.
• Product Key: The key the license was generated from.
• License Source: Where the license was found (e.g., RuntimeLicense, License File).
• License Type: The type of license installed (e.g., Royalty Free, Single Server).
• Last Valid Build: The last valid build number for which the license will work.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to to mask sensitive data. The default is .

This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

When set to , the class will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to tells the class to use the internal implementation instead of using the system security libraries.

This setting is set to by default on all platforms.