CloudStorage Adapter

Properties   Config Settings  

The CloudStorage Component allows easy uploading and downloading to major cloud service providers.

Remarks

The CloudStorage Adapter provides a simple way to upload and download files from a variety of cloud storage providers. Supported services are:

  • Amazon S3
  • Azure Blob
  • Azure File
  • Backblaze B2
  • Box.com
  • Digital Ocean Spaces
  • Dropbox
  • Google Cloud Storage
  • Google Drive
  • Hadoop DFS
  • IBM Cloud Object Storage
  • Linode Object Storage
  • Microsoft OneDrive
  • Wasabi
To begin, the adapter must first be configured to allow access to the specified ServiceProvider. Depending on the provider specified the credentials may either be specified or obtained using OAuth.

Authorization

The following providers use OAuth 2.0 for authorization:

  • Box.com
  • Dropbox
  • Google Cloud Storage*
  • Google Drive
  • Microsoft OneDrive

To perform OAuth authorization first open the OAuth Authorization dialog by clicking the ellipses (...) button of the OAuthAuthorization property at design time. This will open a dialog. Within the dialog specify the ClientId, ClientSecret, and CallbackURL values for the registered application.

After specifying the necessary values press the Authorize button to authorize the application. This will launch a browser and prompt the user to grant access. After access is granted the adapter will populate the following values:

All necessary values will be saved in the CacheLocation for use in subsequent requests by the adapter. The adapter will use the cached values and will automatically refresh the token if needed. In this way any user interaction is only required at design time, not at runtime.

To authenticate with the the other providers, set the AccountInfo property values shown in the table below:

Provider Relevant fields
Amazon S3 AccessKey and SecretKey
Azure Blob Account and AccessKey
Azure File Account and AccessKey
Backblaze B2 ApplicationKeyId and ApplicationKey
Digital Ocean Spaces AccessKey and SecretKey
Google Cloud Storage* ProjectId (if using OAuth authentication); or, AccessKey and SecretKey
Hadoop DFS Multiple HTTP authentication schemes are supported; refer to AuthMechanism for more information. HadoopURL must always be set.
IBM Cloud Object Storage Account and AccessKey
Linode Object Storage Account and AccessKey
Wasabi AccessKey and SecretKey

*Google Cloud Storage supports two authentication methods. To authenticate with OAuth 2.0 (preferred) follow the instructions for OAuth, above, and set the ProjectId field of the AccountInfo property. To authenticate with an access and secret key, set the AccessKey and SecretKey fields of the AccountInfo property instead.

CloudStorage Receive Adapter

At runtime the adapter will connect to the cloud storage provider every PollingInterval and list the directory specified by RemotePath. All files that match the FileMask will be downloaded and submitted to the BizTalk Message Engine as individual messages.

In order to guarantee that files are not downloaded multiple times, you may set the DeleteMode to remove files from the server that have been downloaded. Alternatively DownloadCacheFile may be used to keep a list of files which have already been downloaded.

CloudStorage Send Adapter

The adapter will connect to the cloud storage provider whenever it has a message to send. The adapter will attempt to upload to the specified RemotePath. If Overwrite is set to True, the adapter will delete or overwrite remote files as necessary to complete the operation.

Please refer to the section on adapter configuration for a description of how to configure receive locations and send ports for this adapter.

Receiver Property List


The following is the full list of the properties of the receiver Adapter with short descriptions. Click on the links for further details.

AccountInfoAccount credentials.
DeleteModeControls if and when the remote object is deleted after download.
EncryptionAlgorithmThe encryption algorithm.
EncryptionPasswordThe encryption password.
ErrorThresholdThe maximum number of errors before the component shuts down.
FileMaskIndicates the type of files to download from the server.
FirewallA set of properties related to firewall access.
HTTPProxyA set of properties related to proxy access.
MaxBatchSizeThe maximum size, in MB, of the current batch (0 indicates no limit).
MaxFileCountThe maximum number of files in the current batch (0 indicates no limit).
MaxFileSizeThe maximum size, in MB, of a file in the current batch (0 indicates no limit).
MaxThreadsThe maximum number of threads that the component may consume.
OAuthAuthorizationOAuth Authorization Information.
OtherDefines a set of configuration settings to be used by the component.
PollingIntervalThe amount of time, in seconds, between download attempts.
ReceivedFileDateThe modified date of the remote file received by the component.
ReceivedFileNameThe name of the remote file received by the component.
ReceivedFileSizeThe size of the file in bytes.
RemotePathThe current path on the server.
RequeueEndpointsWhether to requeue receive endpoints if the polling interval has not been reached.
RuntimeLicenseSpecifies the component runtime license key.
ServiceProviderThe cloud storage service provider.
SSLAcceptServerCertInstructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLCertThe certificate to use for client authentication during the SSL handshake.
TempPathA temporary local directory where data can be stored before the component processes it.
TimeoutA timeout for the component.
TransportLogTells the component where and how to report information about its operations.
URIThe Uniform Resource Identifier (URI) of the send port or receive location.

Sender Property List


The following is the full list of the properties of the sender Adapter with short descriptions. Click on the links for further details.

AccountInfoAccount credentials.
ConnectionLifetimeInstructs the component whether or not to leave the connection to the server open.
EncryptionAlgorithmThe encryption algorithm.
EncryptionPasswordThe encryption password.
FirewallA set of properties related to firewall access.
HTTPProxyA set of properties related to proxy access.
MaxPersistentConnectionsThe maximum number of simultaneous persistent connections when sending.
MaxThreadsThe maximum number of threads that the component may consume.
MaxTransmissionBatchSizeThe maximum number of messages that can be sent in a single batch.
OAuthAuthorizationOAuth Authorization Information.
OtherDefines a set of configuration settings to be used by the component.
OverwriteWhether or not the component should overwrite files during transfer.
RemoteFileThe name of the remote file.
RemotePathThe current path on the server.
RuntimeLicenseSpecifies the component runtime license key.
ServiceProviderThe cloud storage service provider.
SSLAcceptServerCertInstructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLCertThe certificate to use for client authentication during the SSL handshake.
TimeoutA timeout for the component.
TransmitBatchModeHow the transmitter processes batches.
TransportLogTells the component where and how to report information about its operations.
URIThe Uniform Resource Identifier (URI) of the send port or receive location.

Config Settings


The following is a list of config settings for the Adapter with short descriptions. Click on the links for further details.

DateFormatThe date format of the file time.
DeleteOnSuspendSpecifies whether files may be deleted from server when message is suspended.
DeleteOnUploadErrorWhether to delete the remote file when an error occurs after upload begins.
DocsExportFormatThe file format to export Google Docs files as when downloading.
DownloadCacheFileWhen set, only new files will be downloaded from the server.
DownloadCacheFileDurationThe number of minutes that a file name will remain in the download cache.
DrawingsExportFormatThe file format to export Google Drawings files as when downloading.
EnableFileDetailsComparisonWhether the receive component should consider metadata differences when deciding whether to download a file again.
IgnoreEmptyFilesWhether to ignore empty files when downloading.
RegionThe region the to make requests against when using an S3-like service provider.
SheetsExportFormatThe file format to export Google Sheets files as when downloading.
SlidesExportFormatThe file format to export Google Slides files as when downloading.
UseVirtualHostingThe URL style to use when making requests with an S3-like service provider.
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLSecurityFlagsFlags that control certificate verification.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.

CloudStorage Receiver

How to Configure a CloudStorage Receive Location with the BizTalk Server Administration Console

To configure the receive location by using the BizTalk Server Administration console, use the following procedure:

NOTE: Before completing the following procedure you must have already added a one-way receive port. For more information, see How to Create a Receive Port.

To configure receive location variables for a CloudStorage receive location:

  1. In the BizTalk Server Administration console, expand BizTalk Server Administration, expand BizTalk Group, expand Applications, and then expand the application you want to create a receive location in.
  2. In the left pane, click the Receive Port node. Then in the right pane, right-click the receive port that is associated with an existing receive location or that you want to associate with a new receive location, and then click Properties.
  3. In the left pane of the Receive Port Properties dialog box, select Receive Locations, and in the right pane double-click an existing receive location or click New to create a new receive location.
  4. In the Receive Location Properties dialog box, in the Transport section next to Type, select nsoftware.CloudStorage 2022 from the drop-down list, and then click Configure to configure the transport properties for the receive location.
  5. In the nsoftware.CloudStorage 2022 Transport Properties dialog box, you will find the following properties:
    AccountInfo

    Account credentials.

    Type: CloudFilesAccount    Default Value: null

    DeleteMode

    Controls if and when the remote object is deleted after download.

    Type: xs:int    Default Value: 0

    EncryptionAlgorithm

    The encryption algorithm.

    Type: xs:int    Default Value: 0

    EncryptionPassword

    The encryption password.

    Type: baf:Password    Default Value: ""

    ErrorThreshold

    The maximum number of errors before the component shuts down.

    Type: xs:int    Default Value: 5

    FileMask

    Indicates the type of files to download from the server.

    Type: xs:string    Default Value: "*.*"

    Firewall

    A set of properties related to firewall access.

    Type: Firewall    Default Value: null

    HTTPProxy

    A set of properties related to proxy access.

    Type: Proxy    Default Value: null

    MaxBatchSize

    The maximum size, in MB, of the current batch (0 indicates no limit).

    Type: xs:int    Default Value: 0

    MaxFileCount

    The maximum number of files in the current batch (0 indicates no limit).

    Type: xs:int    Default Value: 10

    MaxFileSize

    The maximum size, in MB, of a file in the current batch (0 indicates no limit).

    Type: xs:int    Default Value: 0

    MaxThreads

    The maximum number of threads that the component may consume.

    Type: xs:int    Default Value: 20

    OAuthAuthorization

    OAuth Authorization Information.

    Type: OAuthAuthorizationParam    Default Value: null

    Other

    Defines a set of configuration settings to be used by the component.

    Type: xs:string    Default Value: ""

    PollingInterval

    The amount of time, in seconds, between download attempts.

    Type: xs:int    Default Value: 60

    ReceivedFileDate

    The modified date of the remote file received by the component.

    Type: xs:string    Default Value: ""

    ReceivedFileName

    The name of the remote file received by the component.

    Type: xs:string    Default Value: ""

    ReceivedFileSize

    The size of the file in bytes.

    Type: xs:long    Default Value: 0

    RemotePath

    The current path on the server.

    Type: xs:string    Default Value: ""

    RequeueEndpoints

    Whether to requeue receive endpoints if the polling interval has not been reached.

    Type: bool    Default Value: false

    RuntimeLicense

    Specifies the component runtime license key.

    Type: xs:string    Default Value: ""

    ServiceProvider

    The cloud storage service provider.

    Type: xs:int    Default Value: 0

    SSLAcceptServerCert

    Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.

    Type: Certificate    Default Value: null

    SSLCert

    The certificate to use for client authentication during the SSL handshake.

    Type: Certificate    Default Value: null
    NOTE: The digital id must have a private key associated with it.

    TempPath

    A temporary local directory where data can be stored before the component processes it.

    Type: xs:string    Default Value: ""

    Timeout

    A timeout for the component.

    Type: xs:int    Default Value: 60

    TransportLog

    Tells the component where and how to report information about its operations.

    Type: Log    Default Value: null

    URI

    The Uniform Resource Identifier (URI) of the send port or receive location.

    Type: xs:string    Default Value: ""

  6. Click OK.
  7. Enter the appropriate values in the Receive Location Properties dialog box to complete the configuration of the receive location and click OK to save settings. For information about the Receive Locations Properties dialog box, see How to Create a Receive Location.

CloudStorage Transmitter

Setting the CloudStorage Adapter Configuration Properties for a Dynamic Send Port

A dynamic send port does not provide any transport configuration options in BizTalk Explorer because it is expected that these properties will be provided with the context properties associated with the message. These properties can be set in a custom pipeline or in an orchestration. To set message configuration properties in an orchestration you can do the following:

  • Add a Construct Message shape to your orchestration.
  • Configure the Construct Message shape to construct a new message. (for example Message_2)
  • Add a Message Assignment shape to the Construct Message shape.
  • Add code to the Message Assignment shape to initialize the message that you constructed and to set the appropriate configuration properties for the message.

Configuring the CloudStorage Send Port with the BizTalk Server Administration Console

To configure the send port by using the BizTalk Server Administration console, use the following procedure:

To configure variables for a CloudStorage send port:

  1. In the BizTalk Server Administration console, create a new send port or double-click an existing send port to modify it. For more information, see How to Create a Send Port. Configure all of the send port options and specify nsoftware.CloudStorage 2022 for the Type option in the Transport section of the General tab.
  2. On the General tab, in the Transport section, click the Configure button next to Type.
  3. In the nsoftware.CloudStorage 2022 Transport Properties dialog box, use the following properties to:


    AccountInfo Account credentials.
    Type: CloudFilesAccount    Default Value: null
    ConnectionLifetime Instructs the component whether or not to leave the connection to the server open.
    Type: xs:int    Default Value: 0
    EncryptionAlgorithm The encryption algorithm.
    Type: xs:int    Default Value: 0
    EncryptionPassword The encryption password.
    Type: baf:Password    Default Value: ""
    Firewall A set of properties related to firewall access.
    Type: Firewall    Default Value: null
    HTTPProxy A set of properties related to proxy access.
    Type: Proxy    Default Value: null
    MaxPersistentConnections The maximum number of simultaneous persistent connections when sending.
    Type: xs:int    Default Value: 1
    MaxThreads The maximum number of threads that the component may consume.
    Type: xs:int    Default Value: 20
    MaxTransmissionBatchSize The maximum number of messages that can be sent in a single batch.
    Type: xs:int    Default Value: 1
    OAuthAuthorization OAuth Authorization Information.
    Type: OAuthAuthorizationParam    Default Value: null
    Other Defines a set of configuration settings to be used by the component.
    Type: xs:string    Default Value: ""
    Overwrite Whether or not the component should overwrite files during transfer.
    Type: bool    Default Value: true
    RemoteFile The name of the remote file.
    Type: xs:string    Default Value: "%SourceFileName%"
    NOTE: This property must be specified.
    RemotePath The current path on the server.
    Type: xs:string    Default Value: ""
    RuntimeLicense Specifies the component runtime license key.
    Type: xs:string    Default Value: ""
    ServiceProvider The cloud storage service provider.
    Type: xs:int    Default Value: 0
    SSLAcceptServerCert Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.
    Type: Certificate    Default Value: null
    SSLCert The certificate to use for client authentication during the SSL handshake.
    Type: Certificate    Default Value: null
    NOTE: The digital id must have a private key associated with it.
    Timeout A timeout for the component.
    Type: xs:int    Default Value: 60
    TransmitBatchMode How the transmitter processes batches.
    Type: xs:int    Default Value: 0
    TransportLog Tells the component where and how to report information about its operations.
    Type: Log    Default Value: null
    URI The Uniform Resource Identifier (URI) of the send port or receive location.
    Type: xs:string    Default Value: ""

  4. Click OK and OK again to save settings.

AccountInfo Property (CloudStorage Adapter)

Account credentials.

Data Type

CloudFilesAccount

Remarks

This property holds account credentials for all cloud storage service providers that do not use OAuth for authentication (or that do use OAuth, but require additional configuration). This includes the following fields:

ConnectionLifetime Property (CloudStorage Adapter)

Instructs the component whether or not to leave the connection to the server open.

Data Type

Enumeration

Possible Values

Automatic (0)
Per Batch (1)
Persisted (2)


Default Value

0

Remarks

This property is used when uploading batches of messages to a server that use the same connection properties. In order to minimize connection-related protocol overhead, connections may be persisted with various lifetimes:

Automatic (0 - default)The connection to the server will be established as needed per each message. When the message transmission is complete, the adapter will disconnect from the server.
Per Batch (1)During each batch, the connection to the server will be established as needed per each message. If a connection already exists to the server, that will be used as opposed to creating a new one. At the end of the batch, all such connections will be disconnected.
Persisted (2)Connections will be established as needed and stored. If a connection already exists for a server, that will be used as opposed to creating a new one. The connections will not be disconnected until the adapter is terminated by the BizTalk Message Engine.

This property is not available in the Receiver.

DeleteMode Property (CloudStorage Adapter)

Controls if and when the remote object is deleted after download.

Data Type

Enumeration

Possible Values

Never (0)
On Success (1)
On Failure (2)
Always (3)


Default Value

0

Remarks

This property informs the adapter as to whether or not it should delete a remote files from the server after a successful download. The possible values and their meanings are as follows:

NeverThe remote file is never deleted.
OnSuccessThe remote file is deleted after a successful download.
OnFailureThe remote file is deleted if the transfer fails.
AlwaysThe remote file is deleted regardless of success or failure of the transfer.

Note: the default value is Never for data protection purposes. Unless modified this will result in the adapter continuously receiving the same data.

This property is not available in the Sender.

EncryptionAlgorithm Property (CloudStorage Adapter)

The encryption algorithm.

Data Type

Enumeration

Possible Values

AES (0)
Blowfish (1)
CAST (2)
DES (3)
IDEA (4)
RC2 (5)
RC4 (6)
TEA (7)
Triple DES (8)
Twofish (9)
Rijndael (10)
Cha Cha (11)
XSalsa 20 (12)


Default Value

0

Remarks

This property specifies the encryption algorithm to be used. The maximum allowable key size is automatically used for the selected algorithm. Possible values are:

Algorithm Key Size
0 (eaAES - default) 256
1 (eaBlowfish) 448
2 (eaCAST) 128
3 (eaDES) 64
4 (eaIDEA) 128
5 (eaRC2) 128
6 (eaRC4) 2048
7 (eaTEA) 128
8 (eaTripleDES) 192
9 (eaTwofish) 256
10 (eaRijndael) 256
11 (eaChaCha) 256
12 (eaXSalsa20) 256

EncryptionPassword Property (CloudStorage Adapter)

The encryption password.

Data Type

Password

Default Value

""

Remarks

When this property is specified the adapter will attempt to encrypt or decrypt the file when uploading or downloading.

The adapter uses the value specified here to generate the necessary encryption Key and IV values using the PKCS5 password digest algorithm. This provides a simpler alternative to creating and managed Key and IV values directly.

ErrorThreshold Property (CloudStorage Adapter)

The maximum number of errors before the component shuts down.

Data Type

Integer

Default Value

5

Remarks

This property limits the number of errors that the adapter can incur before it shuts down and stops processing messages.

If set to 0 the adapter will never shutdown.

Note that if the operation completes successfully the current error count will be reset.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Sender.

FileMask Property (CloudStorage Adapter)

Indicates the type of files to download from the server.

Data Type

String

Default Value

"*.*"

Remarks

This property will limit what kinds of files the adapter will download from the server. Only files matching the pattern specified in FileMask will be retrieved.

The following special characters are supported for pattern matching:

? Any single character.
* Any characters or no characters (e.g., C*t matches Cat, Cot, Coast, Ct).
[,-] A range of characters (e.g., [a-z], [a], [0-9], [0-9,a-d,f,r-z]).
\ The slash is ignored and exact matching is performed on the next character.

If these characters need to be used as a literal in a pattern, then they must be escaped by surrounding them with brackets []. Note: "]" and "-" do not need to be escaped. See below for the escape sequences:

CharacterEscape Sequence
? [?]
* [*]
[ [[]
\ [\]

For example, to match the value [Something].txt, specify the pattern [[]Something].txt.

This property is not available in the Sender.

Firewall Property (CloudStorage Adapter)

A set of properties related to firewall access.

Data Type

Firewall

Remarks

This is a Firewall type property which contains fields describing the firewall through which the adapter will attempt to connect.

HTTPProxy Property (CloudStorage Adapter)

A set of properties related to proxy access.

Data Type

Proxy

Remarks

This is a Proxy type property which contains fields describing the proxy through which the adapter will attempt to connect.

MaxBatchSize Property (CloudStorage Adapter)

The maximum size, in MB, of the current batch (0 indicates no limit).

Data Type

Integer

Default Value

0

Remarks

This property limits the maximum amount of data the adapter can store before finalizing and processing the current batch to the number of bytes indicated.

Note: the default value, "0" indicates that there is no limit on the size of the batch. This value is not recommended for production environments as it may result in extremely large batches being held in memory before the adapter moves the data to the next stage of processing.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Sender.

MaxFileCount Property (CloudStorage Adapter)

The maximum number of files in the current batch (0 indicates no limit).

Data Type

Integer

Default Value

10

Remarks

This property places a limit on the number of files that can be transmitted in a single batch.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Sender.

MaxFileSize Property (CloudStorage Adapter)

The maximum size, in MB, of a file in the current batch (0 indicates no limit).

Data Type

Integer

Default Value

0

Remarks

This property limits the maximum size of any file in the current transmission batch to the number of bytes indicated.

Note: the default value, "0" indicates that there is no limit on the size of the batch. This value is not recommended for production environments as it may result in extremely large batches being held in memory before the adapter moves the data to the next stage of processing.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Sender.

MaxPersistentConnections Property (CloudStorage Adapter)

The maximum number of simultaneous persistent connections when sending.

Data Type

Integer

Default Value

1

Remarks

This setting specifies the maximum number of simultaneous persistent connections when sending.

The default value is 1, which limits the adapter to using one persistent connection for the adapter at any one time. This means when ConnectionLifetime is set to Persisted the send adapter will first check to see if an existing connection is present before transmitting data. In the case where a connection exists but another instance of the send port is using the connection the adapter will wait for the connection to become free. A value of 1 effectively serializes all communication for the send port through one persistent connection.

By setting a value greater than 1 a pool of persistent connections can be created. This allows multiple simultaneous persistent connections to be used. When the send adapter is active it will check to see if there are any existing connections. In the case where a connection exists but is being used by another instance of the send port it will attempt to create a new persistent connection. If creating a new persistent connection would exceed the limit specified in this setting the adapter will instead wait for a connection to become free. Setting this to a value greater than 1 allows multiple simultaneous connections to be made while still taking advantage of persistent connections to reduce the overhead of re-connecting.

Note: This only applies to the send adapter.

The default value is 1.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Receiver.

MaxThreads Property (CloudStorage Adapter)

The maximum number of threads that the component may consume.

Data Type

Integer

Default Value

20

Remarks

This property limits the number of concurrent threads that the adapter may consume while completing its work.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

MaxTransmissionBatchSize Property (CloudStorage Adapter)

The maximum number of messages that can be sent in a single batch.

Data Type

Integer

Default Value

1

Remarks

This property controls the maximum size of an outbound message batch.

Note: be careful when modifying this property as it directly effects the efficiency of the transmit adapter. Setting MaxTransmissionBatchSize to a low value in an environment that requires transmission of large quantities of data will result in the adapter accumulating several small batches. If TransmitBatchMode is set to Parallel, this will result in the adapter transmitting many small batches at once and can put a heavy load on the processor.

Conversely, if TransmitBatchMode is set to Serial, setting MaxTransmissionBatchSize to a large value may result in long transmission delays as the adapter will wait on existing work to complete before accepting new messages from the BizTalk Message Engine. This is especially true when the adapter is transmitting large data.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Receiver.

OAuthAuthorization Property (CloudStorage Adapter)

OAuth Authorization Information.

Data Type

OAuthAuthorizationParam

Remarks

This property holds details about the OAuth authorization. This includes the following fields:

Other Property (CloudStorage Adapter)

Defines a set of configuration settings to be used by the component.

Data Type

String

Default Value

""

Remarks

The adapter accepts one or more configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the adapter, access to these internal properties is provided through the Other property.

The Other property may be set to one or more configuration settings (name/value pairs). Set one setting per line. For example: configname1=value1 configname2=value2

Overwrite Property (CloudStorage Adapter)

Whether or not the component should overwrite files during transfer.

Data Type

Boolean

Default Value

true

Remarks

This property is a value indicating whether or not the adapter should overwrite files on the server if they already exist. If Overwrite is false, an error will be thrown whenever RemoteFile exists before an upload operation.

This property is not available in the Receiver.

PollingInterval Property (CloudStorage Adapter)

The amount of time, in seconds, between download attempts.

Data Type

Integer

Default Value

60

Remarks

The adapter will wait for the number of seconds indicated before attempting another download.

This property is not available in the Sender.

ReceivedFileDate Property (CloudStorage Adapter)

The modified date of the remote file received by the component.

Data Type

String

Default Value

""

Remarks

This value contains the modified date of the remote file received by the adapter. It can be read from the context of a message received by a adapter receive location.

By default the datetime format used is "yyyy-MM-dd'T'HH:mm:ss". To modify this format set DateFormat.

Note: Modified times are not applicable to directories for the following providers:

  • cspAmazonS3 (0)
  • cspDropbox (2)
  • cspWasabi (7)
  • cspDigitalOcean (8)
  • cspGoogleStorage (9)
  • cspBackblazeB2 (12)
  • cspIBMStorage (13)
  • cspLinode (14)

Additionally, the following providers do not return modified times at all:

  • cspAzureFile (11)

This property is not available in the Sender.

ReceivedFileName Property (CloudStorage Adapter)

The name of the remote file received by the component.

Data Type

String

Default Value

""

Remarks

This is the file name returned by the server.

This value is also placed in the File.ReceivedFileName and the [Adapter].ReceivedFileName context properties. This is to ensure compatibility with other adapters that poll those context properties when filling out macros such as %SourceFileName%.

This property is not available in the Sender.

ReceivedFileSize Property (CloudStorage Adapter)

The size of the file in bytes.

Data Type

Integer

Default Value

0

Remarks

This property holds the size of the received file in bytes. It can be read from the context of a message being received by a adapter receive location.

This property is not available in the Sender.

RemoteFile Property (CloudStorage Adapter)

The name of the remote file.

Data Type

String

Default Value

"%SourceFileName%"

Remarks

This property specifies the remote filename. This is either an absolute path, or a relative path based on RemotePath. For instance:

Filename only: file.txt

Relative Path: subfolder/file.txt

Absolute Path: /MyFolder/subfolder/file.txt

This property is not available in the Receiver.

RemotePath Property (CloudStorage Adapter)

The current path on the server.

Data Type

String

Default Value

""

Remarks

This property specifies the path on the remote server. This may be set to an absolute or relative path.

If the path begins with a "/" it is considered an absolute path.

If the first two characters of the path are ".." this indicates a change to the parent directory.

RequeueEndpoints Property (CloudStorage Adapter)

Whether to requeue receive endpoints if the polling interval has not been reached.

Data Type

Boolean

Default Value

false

Remarks

This setting controls whether receive endpoints are requeued for later processing if the polling interval has not yet been reached. When this setting is set to No (default) each thread will block until the polling interval for the corresponding receive location is reached. If there exist more active receive locations than MaxThreads it is possible for some threads to block the execution of others since they may be waiting for a polling interval.

When this setting is set to Yes if the polling interval has not been reached the thread will not block until the polling interval is reached, and instead the endpoint will be requeued to be processed later. This lets subsequent endpoints in the queue to be processed.

If MaxThreads is set to a low value and there are a larger number of receive locations setting this to Yes will help assure that polling intervals are respected and receive locations poll in a timely manner.

The default value is No.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Sender.

RuntimeLicense Property (CloudStorage Adapter)

Specifies the component runtime license key.

Data Type

String

Default Value

""

Remarks

You can use the RuntimeLicense property to set the runtime key for the adapter license.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

ServiceProvider Property (CloudStorage Adapter)

The cloud storage service provider.

Data Type

Enumeration

Possible Values

Amazon S3 (0)
Box (1)
Dropbox (2)
Google Drive (3)
One Drive (4)
Azure Blob (6)
Wasabi (7)
Digital Ocean (8)
Google Storage (9)
Hadoop DFS (10)
Azure File (11)
Backblaze B2 (12)
IBMStorage (13)
Linode (14)


Default Value

0

Remarks

This property specifies the cloud storage provider to which requests will be made. Possible values are:

  • spAmazonS3 (0) (default): Amazon S3
  • spBox (1): Box.com
  • spDropbox (2): Dropbox
  • spGoogleDrive (3): Google Drive
  • spOneDrive (4): Microsoft OneDrive
  • spAzureBlob (6): Azure Blob
  • spWasabi (7): Wasabi
  • spDigitalOcean (8): Digital Ocean Spaces
  • spGoogleStorage (9): Google Cloud Storage
  • spHadoopDFS (10): Hadoop DFS
  • spAzureFile (11): Azure File
  • spBackblazeB2 (12): Backblaze B2
  • spIBMStorage (13): IBM Cloud Object Storage
  • spLinode (14): Linode Object Storage

SSLAcceptServerCert Property (CloudStorage Adapter)

Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.

Data Type

Certificate

Remarks

If it finds any issues with the certificate presented by the server, the adapter will normally terminate the connection with an error. You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

This property is used to set a Public Key Certificate.

Ordinarily, the system will attempt to locate the public key in trusted certificate stores in the system registry. If a match is found, the certificate is trusted, and the process proceeds without error. If the certificate is not trusted, the adapter will report an error.

You may explicitly set a public key, either to accept a key that is not installed on the system, or to ensure that a specific key is presented. Public key certificates may be loaded from the machine registry or from file. If you click on the ellipses, a certificate selection dialog will open. To select a public key from the system registry, select the System Store tab or the User Store tab, and highlight the appropriate registry store. The list of available certificates will be shown below.

Alternatively, you may specify a public key on file. Select the PEM or Certificate File tabs to load a public key from file. You can use the browse button to examine the file system for the certificate that you wish to use. Public keys typically are stored in .CER, .DER, or .PEM files, but other formats may be used. You can click on the Open button to examine the contents of the certificate. Or, if you have a certificate stored in memory, you can write the contents of the certificate into the text box provided. Note that if you are loading a certificate from memory, the certificate must be Base-64 encoded, or the string representation of the certificate may become corrupted and uninterpretable.

Regardless of how you selected the certificate, once you hit the OK button, the adapter will attempt to verify that certificate selection. If successful, the subject of the certificate will be displayed in the property field. If the adapter was not able to verify the selection, a dialog box will appear instead detailing the verification error.

Note: You may also set the Accept Any field to Yes without opening the certificate selection dialog to force the adapter to unilaterally authenticate any server during the security handshake. It is strongly recommended that you use this only for testing purposes. Set the LogMode to Info to cause the adapter to report the server's credentials to Location.

SSLCert Property (CloudStorage Adapter)

The certificate to use for client authentication during the SSL handshake.

Data Type

Certificate

Remarks

This property is used to assign a specific certificate for SSL client authentication.

This field is used to set a Private Key Certificate.

Private key certificates may be loaded from the registry, from files in PKCS#12 format, or from a PEM file format. If you click on the ellipses, a certificate selection dialog will open. To select a private key from the system registry, select the System Store tab or the User Store tab, and highlight the appropriate registry store. The list of certificates which have private keys will be shown below.

To select a private key certificate from a file in PKCS#12 format, select the PFX Store tab. The browse button can be used to examine the file system for PKCS#12 (.pfx or .p12) certificates. If you wish to examine the certificate, provide the password in the field provided and click on the Open button to examine the file store for certificates present. To load a certificate from PEM files, select the PEM tab. Like the PFX file selection, you can specify the password and click the Open button to examine the certificates in the PEM store, or you may paste any PEM data stored in memory.

Regardless of how you selected the certificate, once you hit the OK button, the adapter will attempt to verify that certificate selection. If successful, the subject of the certificate will be displayed in the property field. If the adapter was not able to verify the selection, a dialog box will appear instead detailing the verification error.

TempPath Property (CloudStorage Adapter)

A temporary local directory where data can be stored before the component processes it.

Data Type

String

Default Value

""

Remarks

This property indicates a temporary directory where the adapter can store any data before the adapter processes it. If TempPath is empty, the adapter will receive all data to memory. If set, the adapter will generate and write all inbound data to a temporary file in the specified directory.

Once the file is submitted, the adapter will handle closing the file stream and deleting the temporary file. However, if the adapter is shut down during a transfer some temporary files may be left in the directory. To ensure optimal performance, server administrators should check the directory regularly and remove old or extraneous files.

This property accepts the "%TEMP%" macro, which will be replaced with the default system temporary directory at runtime. Note: by default, this property is empty and the adapter will use memory streams to store all inbound data before submitting it. It is recommended that you use a temporary directory when downloading large batches or batches containing large files to alleviate potential increased memory requirements.

This property is not available in the Sender.

Timeout Property (CloudStorage Adapter)

A timeout for the component.

Data Type

Integer

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion, or an error condition is encountered.

If Timeout is set to a positive value, the adapter will wait for the operation to complete before returning control.

If Timeout expires, and the operation is not yet complete, the adapter fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when data is successfully sent or received.

Optionally, the behavior of the adapter may be changed to absolute timeouts, i.e. the adapter will wait for a maximum of Timeout seconds since the beginning of the operation, without extending the timeout period during communications.

This behavior is controlled by the AbsoluteTimeout configuration setting.

The default value for the Timeout property is 60 (seconds).

TransmitBatchMode Property (CloudStorage Adapter)

How the transmitter processes batches.

Data Type

Enumeration

Possible Values

Parallel (0)
Serial (1)


Default Value

0

Remarks

This property controls how the transmitter processes message batches:

ParallelThe adapter will process however many batches the BizTalk Message Engine sends it.

The number of maximum concurrent batches may be controlled by the MaxThreads property.

SerialThe adapter will queue batches from the BizTalk Message Engine and process them one at a time.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Receiver.

TransportLog Property (CloudStorage Adapter)

Tells the component where and how to report information about its operations.

Data Type

Log

Remarks

This is a Log type property which contains fields describing how and where the adapter will record information about its execution.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

URI Property (CloudStorage Adapter)

The Uniform Resource Identifier (URI) of the send port or receive location.

Data Type

String

Default Value

""

Remarks

This property specifies a URI for the send port or receive location. Setting this property is optional.

By default the adapter will automatically generate a URI. You may choose to specify your own value here to be used in place of the generated URI.

If this value is specified it must begin with the correct prefix, as seen in the default value.

Certificate Type

The digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

Store
String

Default Value: "MY"

The name of the certificate store for the client certificate.

The StoreType field specifies the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field in order to specify client certificates. If Store has a value, and Subject is set, a search for a certificate is initiated. Please refer to the Subject field for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.
SPCSoftware publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

If the provider is OpenSSL, the certificate store is a file containing a certificate and a private key. This property must be set to the name of the file.

StorePassword
String

Default Value: ""

If the certificate store is of a type that requires a password, this property is used to specify that password in order to open the certificate store.

StoreType
CertStoreTypes

Default Value: 0

The type of certificate store for this certificate.

The adapter supports both public and private keys in a variety of formats. When the cstAuto value is used the adapter will automatically determine the type. This field can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: this store type is not available in Java.
1 (cstMachine)For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
2 (cstPFXFile)The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in PFX (PKCS12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: this store type is only available in Java.
5 (cstJKSBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: this store type is only available in Java and .NET.
22 (cstBCFKSBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: this store type is only available in Java and .NET.
23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS11 interface.

To use a security key the necessary data must first be collected using the CERTMGR adapter. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS11 dll. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN.

Code Example: SSH Authentication with Security Key certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Subject
String

Default Value: ""

The subject of the certificate used for client authentication.

When this property is set, a search is performed in the current certificate store certificate with matching subject.

If an exact match is not found, the store is searched for subjects containing the value of the property.

When setting the property to a partial subject, CN= should be omitted. For example, the following code would find the certificate with subject CN=Test Certificate, OU=People, C=US

Example (Searching with partial subject)

Control.CertSubject = "Test"

If a match is not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

If a matching certificate is found, Subject is set to the full subject of the matching certificate.

Thumbprint
String (read-only)

Default Value: ""

The thumbprint of the certificate.

This field is used to specify the thumbprint of the certificate. When there are multiple certificates in the store that have the same subject, the thumbprint will be used to distinguish between them.

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Certificate();

Creates a Certificate instance whose properties can be set.

public Certificate(string certificateFile);

Opens CertificateFile and reads out the contents as an X509 public key.

public Certificate(byte[] certificateData);

Parses CertificateData as an X509 public key.

public Certificate(CertStoreTypes certStoreType, string store, string storePassword, string subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the constructor will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).

public Certificate(CertStoreTypes certStoreType, string store, string storePassword, byte[] encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the constructor will load Encoded as an X509 certificate and search the opened store for a corresponding private key.

public Certificate(CertStoreTypes certStoreType, byte[] storeBlob, string storePassword, string subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or base64-encoded) containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the constructor will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).

public Certificate(CertStoreTypes certStoreType, byte[] storeBlob, string storePassword, byte[] encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or base64-encoded) containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the constructor will load Encoded as an X509 certificate and search the opened store for a corresponding private key.

CloudFilesAccount Type

Cloud storage service provider account credentials.

Remarks

This type is used to hold account credentials for cloud storage service providers which do not use OAuth for authentication.

Fields

AccessKey
String

Default Value: ""

A storage service provider access key.

This field specifies the access key to use for authentication. It must be populated when using one of these storage service providers:

  • spAmazonS3 (0)
  • spAzureBlob (6)
  • spWasabi (7)
  • spDigitalOcean (8)
  • spGoogleStorage (9) (only if OAuthAuthorization and ProjectId are not populated)
  • spAzureFile (11)
  • spIBMStorage (13)
  • spLinode (14)

Account
String

Default Value: ""

A storage service provider account string.

This field specifies the account string to use for authentication. It must be populated when using one of these storage service providers:

  • spAzureBlob (6)
  • spAzureFile (11)

ApplicationKey
String

Default Value: ""

A storage service provider application key.

This field specifies the application key to use for authentication. It must be populated when using one of these storage service providers:

  • spBackblazeB2 (12)

ApplicationKeyId
String

Default Value: ""

A storage service provider application key Id.

This field specifies the application key Id to use for authentication. It must be populated when using one of these storage service providers:

  • spBackblazeB2 (12)

AuthMechanism
CSAuthMechanisms

Default Value: 0

The HTTP authentication scheme to use (for storage service providers that support multiple).

For storage service providers that support more than one HTTP authentication scheme, this field specifies which should be used. This field is only relevant for the following storage service providers:

  • spHadoopDFS (10)
(For all other storage service providers, the adapter determines the correct authentication scheme automatically).

Usage

Possible values for this field are:

camNone (0) (default) No authentication is performed.
camSimple (1) Hadoop pseudo/simple authentication is performed.
camBasic (2) Basic authentication is performed.
camNTLM (3) NTLM authentication is performed.
camNegotiate (4) Negotiate authentication is performed.

When set to camSimple (1), the value of the User field is automatically sent in every request using the user.name query parameter. (Note: This authentication scheme is only valid for the spHadoopDFS (10) storage service provider.)

When set to camBasic (2), camNTLM (3), or camNegotiate (4), the values held by the User and Password fields will be used to perform Basic, NTLM, or Negotiate authentication.

HadoopURL
String

Default Value: ""

The URL of the Hadoop WebHDFS server.

This field specifies the URL of the Hadoop WebHDFS server to make requests against. It must be set when ServiceProvider is set to spHadoopDFS (10).

A full WebHDFS URL looks like http[s]://<HOST>:<PORT>/webhdfs/v1. The adapter will automatically append /webhdfs/v1 when making requests (if necessary).

The adapter automatically detects whether to secure the connection using SSL/TLS based on whether the value begins with http (not secured) or https (secured).

Password
String

Default Value: ""

A storage service provider password.

This field specifies the password to use for authentication. It must be populated when using one of these storage service providers:

  • spHadoopDFS (10) (only required for certain AuthMechanism options)

ProjectId
String

Default Value: ""

A Google Cloud Platform project Id string.

This field specifies the Google Cloud Platform project Id string to use for authentication. It must be set when using OAuth 2.0 authentication (via the OAuthAuthorization property) with one of these storage service providers:

  • spGoogleStorage (9)

Note that the above providers will fall back to using an AccessKey and SecretKey for authentication if either this field or the OAuthAuthorization property is empty.

SecretKey
String

Default Value: ""

A storage service provider access key.

This field specifies the access key to use for authentication. It must be populated when using one of these storage service providers:

  • spAmazonS3 (0)
  • spWasabi (7)
  • spDigitalOcean (8)
  • spGoogleStorage (9) (only if OAuthAuthorization and ProjectId are not populated)
  • spIBMStorage (13)
  • spLinode (14)

User
String

Default Value: ""

A storage service provider user name.

This field specifies the user name to use for authentication. It must be populated when using one of these storage service providers:

  • spHadoopDFS (10) (only required for certain AuthMechanism options)

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public CloudFilesAccount();

Firewall Type

The firewall the component will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall such as the firewall Host and the FirewallType.

Fields

AutoDetect
Boolean

Default Value: False

Tells the adapter whether or not to automatically detect and use firewall system settings, if available.

FirewallType
FirewallTypes

Default Value: 0

Determines the type of firewall to connect through. The applicable values are the following:

fwNone (0)No firewall (default setting).
fwTunnel (1)Connect through a tunneling proxy. Port is set to 80.
fwSOCKS4 (2)Connect through a SOCKS4 Proxy. Port is set to 1080.
fwSOCKS5 (3)Connect through a SOCKS5 Proxy. Port is set to 1080.

Host
String

Default Value: ""

Name or IP address of firewall (optional). If a Host is given, requested connections will be authenticated through the specified firewall when connecting.

If the Host field is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the Host field is set to the corresponding address. If the search is not successful, an error is returned.

Password
String

Default Value: ""

A password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password fields are used to connect and authenticate to the given firewall. If the authentication fails, a trappable error is fired.

Port
Integer

Default Value: 0

The TCP port for the firewall Host. See the description of the Host field for details.

Note that the Port is set automatically when FirewallType is set to a valid value. See the description of the FirewallType field for details.

User
String

Default Value: ""

A user name if authentication is to be used connecting through a firewall. If the Host is specified, the User and Password fields are used to connect and authenticate to the given Firewall. If the authentication fails, a trappable error is fired.

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Firewall();

Log Type

A log where the component will record information about its operations.

Remarks

This describes how and where the adapter will record information describing its execution.

Fields

Location
String

Default Value: "Application"

This field describes the location where the logging information is to be written.

If the EventLog LogType has been chosen, this field must contain the name of the Event Log to which the information should be written. The default value for this field is "Application". If a value other than "Application" is set the computer must be restarted for the change to take effect. Note that the same event log must be used for all send ports and receive locations that use the same adapter.

If the File LogType has been chosen, this field must contain the location of the file to write logging information to on the file system.

The adapter also supports logging to files based on the current date and time. This allows for log files to be organized by days, months, or other intervals as specified. When specifying a log filename include a valid .NET date and time format string within the < and > characters. For instance C:\logs\sftp_<yyyyMMdd>.log or C:\logs\as2_<yyyyMMdd>T<hhmm>.log.

LogMode
LogModes

Default Value: 3

This field controls what information the adapter logs. The possible values have the following affect on the adapter's behavior:

VerboseThe adapter will report all information regarding the transport.
Info The adapter will report all major operations, as well as all warnings and errors.
WarningThe adapter will report any conditions that could result in unpredictable behavior as well as errors.
ErrorThe adapter will report all errors that prevent normal operations from completing.
FatalThe adapter will report only serious errors that cause the adapter to completely stop functioning.

LogType
LogTypes

Default Value: 1

This property controls where the adapter will log the information. The possible values have the following affect on the adapter's behavior:

NoneThe adapter will not report any logging information.
EventLogThe adapter will report all logging information to the event log. The specific event log must be defined in the Location field when this type is selected.
FileThe adapter will report all logging information to a file. The desired file must be specified in the Location field when this type has been selected.

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Log();
public Log(LogTypes logType, string location, LogModes logMode);

OAuthAuthorizationParam Type

This type holds details of the OAuth authorization.

Remarks

This type holds details of the OAuth authorization.

Fields

AuthorizationScopes
String

Default Value: ""

A space separated list of scopes as defined by the authorization server.

AuthorizationString
String

Default Value: ""

The OAuth Authorization string. This field holds the current OAuth authorization string. This is retrieved during the OAuth authorization process and is used to authenticate the request. This is a string like:

Bearer ya29.AHES6ZSZEJzATdZYjeihDn5W-VrXSsxEZu5p0pclxGdKKQ

CacheLocation
String

Default Value: ""

The location on disk of the OAuth Cache File.

This field specifies the location on disk of the OAuth cache file. This file holds OAuth credentials that may be automatically used during runtime and by other ports using the same provider. The adapter uses the data within the cache file to automatically refresh expired tokens at runtime. Do not alter the contents of the file directly.

One file for each provider is used by default. For instance for Box the value is: %APPDATA%\nsoftware\CloudStorage BizTalk Adapter\BoxOAuthCache.txt

This value may be specified manually as well.

CallbackURL
String

Default Value: ""

The Callback URL used during OAuth authorization.

This field specifies the local URL to which the browser is redirected when initially performing authorization. When initially establishing Authorization set this value to the redirect URI that is registered for your application with the service provider. For instance "http://localhost:7777".

The adapter will parse this URL and start a small embedded web server on the specified port to receive the OAuth response from the provider during OAuth authorization.

This value is required to perform OAuth authorization.

ClientId
String

Default Value: ""

The id of the client assigned when registering the application.

This field holds the id of the client that was assigned when initially registering the application.

This value is required to perform OAuth authorization.

ClientSecret
String

Default Value: ""

The secret of the client assigned when registering the application.

This field holds the secret of the client that was assigned when initially registering the application.

This value is required to perform OAuth authorization.

ExpiresIn
Integer

Default Value: 0

The expiration time of the current OAuth authorization string.

This value is populated after OAuth authorization and holds the expiration time of the OAuth access token as reported by the service provider. This is used at runtime to calculate whether the token should be refreshed before attempting an operation. If the token is expired the adapter will automatically refresh the token. If the token is not expired the adapter will use the current token.

This value should not be set manually.

Note: Not all providers provide this value. For instance Dropbox access tokens never expire.

RefreshToken
String

Default Value: ""

The refresh token received from or sent to the authorization server.

This field holds the refresh token received during the initial OAuth authorization. It is used by the adapter to automatically request a new AuthorizationString when the current value expires.

ServerAuthURL
String

Default Value: ""

The URL of the authorization server.

ServerTokenURL
String

Default Value: ""

The URL of the token server.

ServiceProvider
String

Default Value: ""

The service provider to authenticate with.

This field defines the service provider. This is used when performing OAuth authorization. OAuth authorization is only applicable to some providers. If the provider does not support OAuth a warning will be displayed. Possible values when using the Cloud Storage adapter are:

  • Amazon S3
  • Azure Blob
  • Azure File
  • Backblaze B2
  • Box.com
  • Digital Ocean Spaces
  • Dropbox
  • Google Cloud Storage
  • Google Drive
  • Hadoop DFS
  • IBM Cloud Object Storage
  • Linode Object Storage
  • Microsoft OneDrive
  • Wasabi
Possible values when using the Email adapter are:

  • Gmail
  • Other

TimeStamp
String

Default Value: "0"

The timestamp of the OAuth authorization string.

This field holds the timestamp of when the AuthorizationString was retrieved. This is used in conjunction with ExpiresIn to calculate if refreshing the token is required. For more details see ExpiresIn.

This value should not be set manually.

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public OAuthAuthorizationParam();

Proxy Type

The proxy the component will connect to.

Remarks

When connecting through a proxy, this type is used to specify different properties of the proxy such as the Server and the AuthScheme.

Fields

AuthScheme
ProxyAuthSchemes

Default Value: 0

Use the AuthScheme field to tell the adapter which type of authorization to perform when connecting to the proxy. This is only used when the User and Password fields are set.

AuthScheme should be set to authNone (3) when no authentication is expected.

By default, AuthScheme is authBasic (0), and if the User and Password fields are set, the component will attempt basic authentication. If AuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If AuthScheme is set to authProprietary (2), then the authorization token will not be generated by the adapter. Look at the configuration file for the adapter being used to find more information about manually setting this token.

If AuthScheme is set to authNtlm (4), NTLM authentication will be used. This option is only available in the SSL package.

For security reasons, setting this property will clear the values of User and Password.

AutoDetect
Boolean

Default Value: False

Tells the adapter whether or not to automatically detect and use proxy system settings, if available.

Password
String

Default Value: ""

A password if authentication is to be used for the proxy.

If AuthScheme is set to Basic Authentication, the User and Password are Base64 encoded and the proxy authentication token will be generated in the form "Basic [encoded-user-password]".

If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server.

If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation.

Port
Integer

Default Value: 80

The TCP port for the proxy Server (default 80). See the description of the Server field for details.

Server
String

Default Value: ""

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the Server field is set to a Domain Name, a DNS request is initiated and upon successful termination of the request, the Server field is set to the corresponding address. If the search is not successful, an error is returned.

SSL
ProxySSLTypes

Default Value: 0

Determines when to use SSL for the connection to the proxy. The applicable values are the following:

psAutomatic (0)Default setting. The connection to the Server is SSL-enabled for 'https' URL-s, and non SSL-enabled for other URL-s.
psAlways (1)The connection is always SSL-enabled.
psNever (2)The connection is not SSL-enabled.
psTunnel (3)The connection is through a tunneling (HTTP) proxy.

User
String

Default Value: ""

A user name, if authentication is to be used for the proxy.

If AuthScheme is set to Basic Authentication, the User and Password are Base64 encoded and the proxy authentication token will be generated in the form "Basic [encoded-user-password]".

If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server.

If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation.

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Proxy();
public Proxy(string server, int port);
public Proxy(string server, int port, string user, string password);

Config Settings (CloudStorage Adapter)

The adapter accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the adapter, access to these internal properties is provided through the Other property.

CloudStorage Config Settings

DateFormat:   The date format of the file time.

This setting specifies the format of the datetime used when reporting the file's modified date. The default value is "yyyy-MM-dd'T'HH:mm:ss" and the server time will be localized.

If this setting is set to empty string the exact value sent by the server will be returned.

DeleteOnSuspend:   Specifies whether files may be deleted from server when message is suspended.

If true, the file on the server will be deleted in accordance with the option selected in DeleteMode even if the message is suspended.

The default value is False.

DeleteOnUploadError:   Whether to delete the remote file when an error occurs after upload begins.

If an error occurs after an upload has started, the partial upload may remain on the remote server after the error is handled. If this setting is True, the send adapter will delete the partial upload while handling the error. The default value is False.

This is only applicable to the send adapter.

DocsExportFormat:   The file format to export Google Docs files as when downloading.

This setting specifies what file format to export Google Docs as when downloading; it takes a file extension, which will be applied to the downloaded filename if necessary. Valid values (and their associated MIME types) are:

  • docx (default) - application/vnd.openxmlformats-officedocument.wordprocessingml.document
  • epub - application/epub+zip
  • htm or html - text/html
  • odt - application/vnd.oasis.opendocument.text
  • pdf - application/pdf
  • rtf - application/rtf
  • txt - text/plain
  • zip - application/zip
You may also specify a string like [extension],[MIME type] instead of one of the file extensions above if you wish to customize the MIME type to export the file as and/or the file extension to apply to the downloaded file.

Note that this setting is only applicable to the CloudStorage Receiver, and is only valid when the ServiceProvider property is set to spGoogleDrive (3).

DownloadCacheFile:   When set, only new files will be downloaded from the server.

This may be set to the location of a file on disk that will hold the names of files that were previously downloaded from the server. On each PollingInterval the adapter will check to see if the file on the server exists in this list. If the file exists in this list, it is determined that the file was previously downloaded and is not downloaded on the current polling interval. The list is automatically updated on each polling interval. Please see DownloadCacheFileDuration and EnableFileDetailsComparison for more configuration options.

DownloadCacheFileDuration:   The number of minutes that a file name will remain in the download cache.

If a file name is added to the DownloadCacheFile and is not seen on the server again within DownloadCacheFileDuration minutes, it will be removed from the cache. This can prevent the download cache file from growing too large in certain cases.

The default value is 0, meaning that files will never be removed.

This setting is only applicable if DownloadCacheFile is set.

DrawingsExportFormat:   The file format to export Google Drawings files as when downloading.

This setting specifies what file format to export Google Drawings as when downloading; it takes a file extension, which will be applied to the downloaded filename if necessary. Valid values (and their associated MIME types) are:

  • jpg or jpeg - image/jpeg
  • pdf - application/pdf
  • png (default) - image/png
  • svg - image/svg+xml
You may also specify a string like [extension],[MIME type] instead of one of the file extensions above if you wish to customize the MIME type to export the file as and/or the file extension to apply to the downloaded file.

Note that this setting is only applicable to the CloudStorage Receiver, and is only valid when the ServiceProvider property is set to spGoogleDrive (3).

EnableFileDetailsComparison:   Whether the receive adapter should consider metadata differences when deciding whether to download a file again.

This setting is used in conjunction with DownloadCacheFile, and is only available on the receive adapter. If DownloadCacheFile is enabled, this setting can be used to control how the receive adapter uses the download file cache information when deciding whether to download a file again. (Similar to the "Enable Timestamp Comparison" property on Microsoft's FTP BizTalk Adapter.)

If this is set to False, the receive adapter will not download a file again if the cache contains any information about it (that is, if it has been downloaded before).

If this is set to True, the receive adapter will check the metadata of the remote file against its cached metadata, and will download the file again if any of the metadata differs.

IgnoreEmptyFiles:   Whether to ignore empty files when downloading.

When this setting is enabled (default False) the adapter will ignore any empty files when downloading. This may be useful for working with other sources that create an empty file when they start uploading and then update the contents, like when another source is uploading to an Azure storage account with SFTP.

Region:   The region the to make requests against when using an S3-like service provider.

When the ServiceProvider property is set to one of the following providers, this setting can be used to specify which region the adapter should make requests against:

  • spAmazonS3 (0)
  • spWasabi (7)
  • spDigitalOcean (8)
  • spGoogleStorage (9)
  • spIBMStorage (13)
  • spLinode (14)

When ServiceProvider is set to spAmazonS3 (0), possible values are:

Value Region
us-east-1 (Default) US East (N. Virginia)
us-east-2 US East (Ohio)
us-west-1 US West (N. California)
us-west-2 US West (Oregon)
ap-east-1 Asia Pacific (Hong Kong)
ap-northeast-1 Asia Pacific (Tokyo)
ap-northeast-2 Asia Pacific (Seoul)
ap-northeast-3 Asia Pacific (Osaka-Local)
ap-south-1 Asia Pacific (Mumbai)
ap-southeast-1 Asia Pacific (Singapore)
ap-southeast-2 Asia Pacific (Sydney)
ca-central-1 Canada (Central)
cn-north-1 China (Beijing)
cn-northwest-1 China (Ningxia)
eu-central-1 Europe (Frankfurt)
eu-north-1 Europe (Stockholm)
eu-south-1 Europe (Milan)
eu-west-1 Europe (Ireland)
eu-west-2 Europe (London)
eu-west-3 Europe (Paris)
me-south-1 Middle East (Bahrain)
sa-east-1 South America (Sao Paulo)

When ServiceProvider is set to spWasabi (7), possible values are:

Value Region
eu-central-1 Europe (Amsterdam)
us-east-1 (Default) US East (Ashburn, VA)
us-east-2 US East (Manassas, VA)
us-west-1 US West (Hillsboro, OR)

When ServiceProvider is set to spDigitalOcean (8), possible values are:

Value Region
ams2 Amsterdam 2
ams3 Amsterdam 3
blr1 Bangalore 1
fra1 Frankfurt 1
lon1 London 1
nyc1 New York 1
nyc2 New York 2
nyc3 (Default) New York 3
sfo1 San Francisco 1
sfo2 San Francisco 2
sgp1 Singapore 1
tor1 Toronto 1

When ServiceProvider is set to spGoogleStorage (9), possible values are:

Value Region
us* (Default) Multiple US data centers
us-central1 US Central (Iowa)
us-east1 US East (South Carolina)
us-east4 US East (Northern Virginia)
us-west1 US West (Oregon)
us-west2 US West (Los Angeles)
asia* Multiple Asia data centers
asia-east1 Asia East (Taiwan)
asia-east2 Asia East (Hong Kong)
asia-northeast1 Asia Northeast (Tokyo)
asia-south1 Asia South (Mumbai)
asia-southeast1 Asia Southeast (Singapore)
australia-southeast1 Australia Southeast (Sydney)
eu* Multiple EU data centers
europe-north1 Europe North (Finland)
europe-west1 Europe West (Belgium)
europe-west2 Europe West (London)
europe-west3 Europe West (Frankfurt)
europe-west4 Europe West (Netherlands)
northamerica-northeast1 Canada (Montreal)
southamerica-east1 Brazil (Sao Paulo)
(* denotes a multi-regional location)

When ServiceProvider is set to spIBMStorage (13), possible values are:

Value Region
Cross-Region
us (default) US Cross Region
dal.us US Cross Region (Dallas Access Point)
sjc.us US Cross Region (San Jose Access Point)
wdc.us US Cross Region (Washington DC Access Point)
eu EU Cross Region
ams.eu EU Cross Region (Amsterdam Access Point)
fra.eu EU Cross Region (Frankfurt Access Point)
mil.eu EU Cross Region (Milan Access Point)
ap Asia Pacific Cross Region
hkg.ap Asia Pacific Cross Region (Hong Kong Access Point)
seo.ap Asia Pacific Cross Region (Seoul Access Point)
tok.ap Asia Pacific Cross Region (Tokyo Access Point)
Regional
au-syd Australia (Sydney)
eu-de EU (Germany)
eu-gb EU (United Kingdom)
jp-tok Japan (Tokyo)
us-east US (East)
us-south US (South)
Single-Site
ams03 Netherlands (Amsterdam)
che01 India (Chennai)
hkg02 Hong Kong
mel01 Australia (Melbourne)
mex01 Mexico (Mexico City)
mil01 Italy (Milan)
mon01 Canada (Montreal)
osl01 Norway (Oslo)
par01 France (Paris)
sao01 Brazil (Sao Paulo)
seo01 South Korea (Seoul)
sjc04 US (San Jose)
sng01 Singapore
tor01 Canada (Toronto)

Note that private. or direct. may optionally be prepended to any of the values above; refer to IBM Cloud's Object Storage documentation for information on regions and endpoints.

When ServiceProvider is set to spLinode (14), possible values are:

Value Region
us-east-1 (default) US East (Newark)
eu-central-1 EU Central (Frankfurt)

The lists above are not necessarily exhaustive; refer to the appropriate service provider's documentation for a complete list of regions.

SheetsExportFormat:   The file format to export Google Sheets files as when downloading.

This setting specifies what file format to export Google Sheets as when downloading; it takes a file extension, which will be applied to the downloaded filename if necessary. Valid values (and their associated MIME types) are:

  • csv - text/csv
  • ods - application/vnd.oasis.opendocument.spreadsheet
  • pdf - application/pdf
  • tsv - text/tab-separated-values
  • xlsx (default) - application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
  • zip - application/zip
You may also specify a string like [extension],[MIME type] instead of one of the file extensions above if you wish to customize the MIME type to export the file as and/or the file extension to apply to the downloaded file.

Note that this setting is only applicable to the CloudStorage Receiver, and is only valid when the ServiceProvider property is set to spGoogleDrive (3).

SlidesExportFormat:   The file format to export Google Slides files as when downloading.

This setting specifies what file format to export Google Slides as when downloading; it takes a file extension, which will be applied to the downloaded filename if necessary. Valid values (and their associated MIME types) are:

  • odp - application/vnd.oasis.opendocument.presentation
  • pdf - application/pdf
  • pptx (default) - application/vnd.openxmlformats-officedocument.presentationml.presentation
  • txt - text/plain
You may also specify a string like [extension],[MIME type] instead of one of the file extensions above if you wish to customize the MIME type to export the file as and/or the file extension to apply to the downloaded file.

Note that this setting is only applicable to the CloudStorage Receiver, and is only valid when the ServiceProvider property is set to spGoogleDrive (3).

UseVirtualHosting:   The URL style to use when making requests with an S3-like service provider.

When the ServiceProvider property is set to one of the following providers, this setting can be used to specify whether the adapter should make requests using virtual-hosted-style URLs or path-style URLs:

  • spAmazonS3 (0) - True by default.
  • spWasabi (7) - False by default.
  • spDigitalOcean (8) - False by default.
  • spGoogleStorage (9) - False by default.
  • spIBMStorage (13) - True by default.
  • spLinode (14) - True by default.

When True, the adapter will use virtual-hosted-style URLs like, e.g., https://yourbucket.[SERVICE_PROVIDER_DOMAIN]/yourobjectpath. When False, the adapter will use path-style URLs like, e.g., https://[SERVICE_PROVIDER_DOMAIN]/yourbucket/yourobject.

Important: Amazon has publicly announced that buckets created after September 30, 2020 will only support virtual-hosted-style URLs. Buckets created on or before September 30, 2020 will continue to support both URL styles.

SSL Config Settings

ReuseSSLSession:   Determines if the SSL session is reused.

If set to true, the adapter will reuse the context if and only if the following criteria are met:

  • The target host name is the same.
  • The system cache entry has not expired (default timeout is 10 hours).
  • The application process that calls the function is the same.
  • The logon session is the same.
  • The instance of the adapter is the same.

SSLCipherStrength:   The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

SSLEnabledCipherSuites:   The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the adapter will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when UseInternalSecurityAPI is False (default): // The "Other" property could contain ONE of the following lines: SSLEnabledCipherSuites=* SSLEnabledCipherSuites=CALG_AES_256 SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES Possible values when UseInternalSecurityAPI is False (default) include:

  • CALG_3DES
  • CALG_3DES_112
  • CALG_AES
  • CALG_AES_128
  • CALG_AES_192
  • CALG_AES_256
  • CALG_AGREEDKEY_ANY
  • CALG_CYLINK_MEK
  • CALG_DES
  • CALG_DESX
  • CALG_DH_EPHEM
  • CALG_DH_SF
  • CALG_DSS_SIGN
  • CALG_ECDH
  • CALG_ECDH_EPHEM
  • CALG_ECDSA
  • CALG_ECMQV
  • CALG_HASH_REPLACE_OWF
  • CALG_HUGHES_MD5
  • CALG_HMAC
  • CALG_KEA_KEYX
  • CALG_MAC
  • CALG_MD2
  • CALG_MD4
  • CALG_MD5
  • CALG_NO_SIGN
  • CALG_OID_INFO_CNG_ONLY
  • CALG_OID_INFO_PARAMETERS
  • CALG_PCT1_MASTER
  • CALG_RC2
  • CALG_RC4
  • CALG_RC5
  • CALG_RSA_KEYX
  • CALG_RSA_SIGN
  • CALG_SCHANNEL_ENC_KEY
  • CALG_SCHANNEL_MAC_KEY
  • CALG_SCHANNEL_MASTER_HASH
  • CALG_SEAL
  • CALG_SHA
  • CALG_SHA1
  • CALG_SHA_256
  • CALG_SHA_384
  • CALG_SHA_512
  • CALG_SKIPJACK
  • CALG_SSL2_MASTER
  • CALG_SSL3_MASTER
  • CALG_SSL3_SHAMD5
  • CALG_TEK
  • CALG_TLS1_MASTER
  • CALG_TLS1PRF
Example values when UseInternalSecurityAPI is True: // The "Other" property could contain ONE of the following lines: SSLEnabledCipherSuites=* SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA Possible values when UseInternalSecurityAPI is True include:
  • TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
  • TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
  • TLS_DHE_DSS_WITH_DES_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
  • TLS_DHE_RSA_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_128_GCM_SHA256
  • TLS_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA
  • TLS_RSA_WITH_AES_256_CBC_SHA256
  • TLS_RSA_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_RC4_128_MD5
  • TLS_RSA_WITH_RC4_128_SHA

If SSLEnabledProtocols is configured to use TLS 1.3 the following values are supported:

  • TLS_AES_128_GCM_SHA256
  • TLS_AES_256_GCM_SHA384

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols:   Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

TLS1.312288 (Hex 3000) (Experimental)
TLS1.23072 (Hex C00) (Default)
TLS1.1768 (Hex 300) (Default)
TLS1 192 (Hex C0) (Default)
SSL3 48 (Hex 30)
SSL2 12 (Hex 0C)

Note: TLS 1.1 and TLS1.2 support are only available starting with Windows 7.

Note: Enabling TLS 1.3 will automatically set UseInternalSecurityAPI to True.

SSLIncludeCertChain:   Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the transport log contains the full certificate chain. By default this value is False and only the leaf certificate will be present.

If set to True all certificates returned by the server will be present in the transport log. This includes the leaf certificate, any intermediate certificate, and the root certificate.

Note: When UseInternalSecurityAPI is set to True this value is automatically set to True. This is needed for proper validation when using the internal provider.

SSLSecurityFlags:   Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

0x00000001Ignore time validity status of certificate.
0x00000002Ignore time validity status of CTL.
0x00000004Ignore non-nested certificate times.
0x00000010Allow unknown Certificate Authority.
0x00000020Ignore wrong certificate usage.
0x00000100Ignore unknown certificate revocation status.
0x00000200Ignore unknown CTL signer revocation status.
0x00000400Ignore unknown Certificate Authority revocation status.
0x00000800Ignore unknown Root revocation status.
0x00008000Allow test Root certificate.
0x00004000Trust test Root certificate.
0x80000000Ignore non-matching CN (certificate CN not-matching server name).

TLS12SignatureAlgorithms:   Defines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.

This setting specifies the allowed server certificate signature algorithms when UseInternalSecurityAPI is True and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the adapter will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the adapter will fail with an error.

The format of this value is a comma separated list of hash-signature combinations. For instance: // The "Other" could contain ALL of these lines: UseInternalSecurityAPI=true SSLEnabledProtocols=3072 TLS12SignatureAlgorithms=sha1-rsa,sha1-dsa,sha256-rsa,sha256-dsa The default value for this setting is "sha1-rsa,sha1-dsa,sha224-rsa,sha224-dsa,sha256-rsa,sha256-dsa,sha384-rsa,sha384-dsa,sha512-rsa,sha512-dsa".

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups:   The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and UseInternalSecurityAPI is set to True, the values refer to the supported groups for ECC. The following values are supported:

  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)

TLS13KeyShareGroups:   The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448"
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1"
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096"
  • "ffdhe_6144"
  • "ffdhe_8192"

TLS13SignatureAlgorithms:   The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

  • "rsa_pkcs1_sha256" (default)
  • "rsa_pkcs1_sha384" (default)
  • "rsa_pkcs1_sha512" (default)
The default value is rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.
TLS13SupportedGroups:   The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448" (default)
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096" (default)
  • "ffdhe_6144" (default)
  • "ffdhe_8192" (default)

Supported Macros

The adapter also supports the following Macros. These values are not case sensitive and would be supplied to a property in the form %MacroName%.

TempThis is resolved to the full path to the system's temporary directory. MessageIDGlobally unique identifier (GUID) of the message in BizTalk Server. SourceFileNameThe original file name. This includes the extension and excludes the file path, for example, Sample.xml SourceFileNameNoExtThe original file name without the extension or file path, for example, Sample RemoteFileNameThe name of the file as it was uploaded to the remote server. This includes the extension and excludes the file path, for example, Sample.xml. Valid only for AS3, FTP, and SFTP Send Adapters. DestinationPartyName of the destination party. DestinationPartyQualifierQualifier of the destination party. SourcePartyName of the source party. SourcePartyQualifierQualifier of the source party. DateTime:CustomFormatThis special value allows you to specify your own custom time format. For instance DateTime:yyyy would be resolved to the 4 digit year. DateThe date format yyyy-MM-dd. DateTimeThe date format yyyy-MM-ddThhmmss. TimeThe date format hhmmss. DateTime_BTS2000The date format yyyyMMddhhmmssf. DateTime.TZThe date format yyyy-MM-ddThhmmsszzz. Time.TZThe date format hhmmsszzz. Property#<Schema>#<Name>This special value allows you to include a property from the incoming message. For instance "PROPERTY#http://schemas.microsoft.com/BizTalk/2003/system-properties#ReceivePortName" would resolve to the ReceivePortName property of the message.