OAuth Class

Properties Methods Events Config Settings Errors

The OAuth class is used to authorize a client and provide an authorization string used in future requests.

Syntax

cloudmail.oauth()

Remarks

The OAuth class supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL-related settings are also supported through the Config method.

The OAuth class provides an easy way to obtain an authorization string for future requests to a service. The class implements an OAuth 2.0 client.

To begin using the class, first register your application with the service you want to use. During this process, obtain a ClientId and ClientSecret as well as the ServerAuthURL and ServerTokenURL for the authorization server. Then set ClientProfile to the client profile that best describes your situation and call GetAuthorization.

The following client profiles are currently supported by the class:

Application (desktop application)
Web (server-side application, such as a website)
Device (an application without browser access, such as a game console)
Mobile (phone or tablet application)
JWT (server-to-server authentication using a JWT Bearer Token, such as Google service account authentication)

Please see the detailed descriptions for each client profile as well as how the class is used to authorize an application using that client profile.

Application Profile

The Application profile is applicable to applications that are run directly by the user. For instance, a Windows form application would use the Application profile. To authorize your application (client) using the Application profile, use the following steps:

First, set ClientProfile to ocpApplication. This defines the profile the class will use. Set the ClientId, ClientSecret, ServerAuthURL, and ServerTokenURL to the values you obtained when registering your application.

Second, call GetAuthorization to begin the authorization process. When GetAuthorization is called, the class will build the URL to which the user will be directed and fire the LaunchBrowser event. The class will then launch the browser using the command and URL shown in the LaunchBrowser event and await the response. The duration for which the class will wait for a response is defined by BrowserResponseTimeout.

Third, the user will interact with the browser to authenticate and grant access to the connecting application. The user will then be redirected back to an embedded web server that was automatically started when GetAuthorization was called. At this time, the ReturnURL event will fire. This event provides an opportunity to provide a custom response to your user that they will see in their browser.

Fourth, the class will then automatically exchange the grant that was returned by the authorization server for the access token using the HTTP endpoint specified in ServerTokenURL.

The authorization is now complete and the GetAuthorization method will return the authorization string. The authorization string can then be used with any of our components by simply setting the returned value to the authorization property before making a request.

The following is a simple example: component.ClientId = "CLIENT_ID"; component.ClientSecret = "CLIENT_ID"; component.ServerAuthURL = "https://accounts.google.com/o/oauth2/auth"; component.ServerTokenURL = "https://accounts.google.com/o/oauth2/token"; HTTP.Authorization = component.GetAuthorization(); HTTP.Get("https://www.googleapis.com/oauth2/v1/userinfo");

Web Profile

The Web profile is applicable to applications that are run on the server side when the user uses the application from a web browser. To authorize your application (client) using this profile, use the following steps:

First, set ClientProfile to ocpWeb. This defines the profile the component will use. Set the ClientId, ClientSecret, ServerAuthURL, and ServerTokenURL to the values you obtained when registering your application. Set ReturnURL to the page on your site that will be the endpoint the user is redirected back to after authentication.

Second, call GetAuthorizationURL. This will return a URL to which the user should be redirected. Redirect the user to this URL.

Third, after the user authenticates and is returned to the page on your site specified by ReturnURL, parse the "code" query string parameter from the incoming request to get the authorization code from the authorization server. Then, set AuthorizationCode property to the parsed value.

Fourth, after AuthorizationCode is set, call GetAuthorization to exchange the code specified in AuthorizationCode for a token from the server specified by ServerTokenURL. GetAuthorization will then return the authorization string. The authorization string can be used with any of our components by simply setting the returned value to the authorization property before making a request.

Device Profile

The Device profile is applicable to applications that are run on devices for which a web browser cannot be used. For example, a game console would use the Device profile. To authorize your application (client) using the device client profile use the following steps:

First, set ClientProfile to ocpDevice. This defines the profile the class will use. Set the ClientId, ClientSecret, ServerAuthURL, and ServerTokenURL to the values you obtained when registering your application. Do not set ReturnURL.

Second, call GetAuthorizationURL. The class will automatically make a request to ServerAuthURL to obtain a user code for the device. The GetAuthorizationURL method will return the URL your user must visit from another device or computer that has web browser support. The GetAuthorizationURL method will also populate DeviceUserCode. This device user code must be provided to the user. The user will enter the code at the URL returned by GetAuthorizationURL.

Third, at this time, call GetAuthorization. The class will begin polling the server specified in ServerTokenURL. The polling interval is specified (in seconds) by the PollingInterval setting.

Fourth, after the user has authenticated, the GetAuthorization method will return the authorization string. To use the authorization string with any of our components, simply pass this value to the authorization property before making the request.

Mobile Profile

The Mobile profile is applicable to applications that are run on devices for which a web browser can be used. For instance, a mobile phone or tablet would use the Mobile profile. The behavior when using this profile is very similar to the Application profile. The only difference between the Mobile and Application profiles is the way the browser is launched. When set to the Mobile profile, the LaunchBrowser event will fire but the class will not attempt to launch the browser automatically. The browser must be launched manually from code. This behavior is the only difference between the Mobile and Application profiles. Please read the steps for the Application profile for a more detailed look at the process.

JWT Bearer Token (Server-to-Server) Profile

The JWT (JSON Web Token) Bearer Token profile is available for server-to-server authentication. For instance this may be used by web applications to access a Google service. In this case, the application will access data on behalf of the service account, not the end user. End-user interaction is not required.

First, specify AuthorizationScope ServerTokenURL and JWTServiceProvider.

Second, specify JWT-specific values. The use of the JWT profile also requires additional configuration settings to be specified, including a certificate with private key used to sign the JWT. Either specify the JWTJSONKey configuration setting, which will parse the necessary information automatically, or manually specify the following configuration settings:

JWTIssuer (required)
JWTAudience (required)
JWTCertStoreType (required)
JWTCertStore (required)
JWTCertStorePassword (required)
JWTCertSubject (required)
JWTSubject
JWTValidityTime
JWTSignatureAlgorithm

Additional fields may be added to the JWT using the AddParam method.

Example 1. Google: oauth.AuthorizationScope = "https://www.googleapis.com/auth/analytics"; oauth.ServerTokenURL = "https://www.googleapis.com/oauth2/v3/token"; oauth.ClientProfile = OauthClientProfiles.ocpJWT; oauth.Config("JWTServiceProvider=0"); oauth.Config("JWTIssuer=CLIENT_ID"); oauth.Config("JWTAudience=https://www.googleapis.com/oauth2/v3/token"); oauth.Config("JWTCertStoreType=2"); oauth.Config("JWTCertStore=C:\\MyCertificate.p12"); oauth.Config("JWTCertStorePassword=password"); oauth.Config("JWTCertSubject=*"); oauth.Config("JWTValidityTime=5400"); //in seconds string authStr = oauth.GetAuthorization();

Example 2. Microsoft: oauth.ClientId = "Client_Id"; oauth.ClientProfile = OauthClientProfiles.ocpJWT; oauth.AuthorizationScope = "https://graph.microsoft.com/.default"; oauth.ServerTokenURL = "https://login.microsoftonline.com/" + tenant_id + "/oauth2/V2.0/token"; oauth.Config("JWTServiceProvider=1"); oauth.Config("JWTIssuer=" + CLIENT_ID); oauth.Config("JWTSubject=" + CLIENT_ID); oauth.Config("JWTCertStoreType=2"); oauth.Config("JWTCertStore=C:\\MyCertificate.p12"); oauth.Config("JWTCertStorePassword=password"); oauth.Config("JWTCertSubject=*"); oauth.Config("JWTValidityTime=3600"); oauth.Config("JWTAudience=https://login.microsoftonline.com/"+ tenant_id + "/oauth2/V2.0/token"); string authStr = oauth.GetAuthorization();

Custom Responses

When using a profile that makes use of the embedded web server, the response that is displayed to the user on success of failure may be customized to include a variety of product- and company-specific information. The following section is applicable only when the embedded web server is used, for instance, when ClientProfile is set to ocpApplication.

By default, the class will display a formatted result message indicating whether the authorization succeeded or failed. The following optional settings control the text of the message as well as product images, company logos, and links for help or licensing terms that can be displayed to the user.


Configuration Setting	Description
ResponseSuccessHeading	Short header text indicating success. The default value is `Authorization Successful`
ResponseSuccessMessage	A description for a successful authorization. The default value is `Access to your account was successfully authorized. You may now close this window.`
ResponseFailureHeading	Short header text indicating failure. The default value is `Authorization Failed`
ResponseFailureMessage	A description for a failed authorization. The default value is `Access to your account could not be authorized. Please check your user and connection details and try again.`
ResponseHelpURL	A URL to a help page or other resource. If set, a `Help` link will be displayed and point to this URL.
ResponseLicenseURL	A URL to licensing terms. If set, a `License` link will be displayed and point to this URL.
ResponseProductURL	A URL to a product page or similar resource. This is used in conjunction with ResponseProductImage.
ResponseProductImage	A URL or full path to a product image. If set, the image will be displayed and will be a hyperlink to ResponseProductURL.
ResponseCompanyURL	A URL to the company website or similar resource. This is used in conjunction with ResponseCompanyImage.
ResponseCompanyImage	A URL or full path to a company logo. If set, the image will be displayed and will be a hyperlink to ResponseCompanyURL.

Alternatively, for complete control, set the WebServerResponse and WebServerFailedResponse settings to the full HTML to be displayed to the user.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.


AccessToken	The access token returned by the authorization server.
AccessTokenExp	The lifetime of the access token.
AuthorizationCode	The authorization code that is exchanged for an access token.
AuthorizationScope	The scope request or response parameter used during authorization.
ClientId	The Id of the client assigned when registering the application.
ClientProfile	The type of client that is requesting authorization.
ClientSecret	The secret value for the client assigned when registering the application.
Connected	Whether the class is connected.
Cookies	A collection of cookies.
Firewall	A set of properties related to firewall access.
FollowRedirects	Determines what happens when the server issues a redirect.
GrantType	The OAuth grant type used to acquire an OAuth access token.
Idle	The current status of the class.
LocalHost	The name of the local host or user-assigned IP interface through which connections are initiated or accepted.
OtherHeaders	Other headers as determined by the user (optional).
Params	The parameters to be included in the request to the authorization server or received in the response.
Proxy	A set of properties related to proxy access.
RefreshToken	The refresh token received from or sent to the authorization server.
ReturnURL	The URL where the user (browser) returns after authenticating.
ServerAuthURL	The URL of the authorization server.
ServerTokenURL	The URL used to obtain the access token.
SSLAcceptServerCert	Instructs the class to unconditionally accept the server certificate that matches the supplied certificate.
SSLCert	The certificate to be used during Secure Sockets Layer (SSL) negotiation.
SSLProvider	The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.
SSLServerCert	The server certificate for the last established connection.
Timeout	The timeout for the class.
TransferredData	The contents of the last response from the server.
TransferredHeaders	The full set of headers as received from the server.
UsePKCE	Whether Proof Key for Code Exchange (PKCE) should be used.
WebServerPort	The local port on which the embedded web server listens.
WebServerSSLCert	The certificate with the private key to use when a Secure Sockets Layer (SSL) is enabled.
WebServerSSLEnabled	Whether the web server requires Secure Sockets Layer (SSL) connections.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.


AddCookie	Adds a cookie and the corresponding value to the outgoing request headers.
AddParam	Adds a name-value pair to the query string parameters of the outgoing request.
Config	Sets or retrieves a configuration setting.
DoEvents	This method processes events from the internal message queue.
GetAuthorization	Gets the authorization string required to access the protected resource.
GetAuthorizationURL	Builds and returns the URL to which the user should be redirected for authorization.
GetParam	Gets a specific parameter from a query string.
Interrupt	This method interrupts the current method.
Reset	This method will reset the class.
StartWebServer	Starts the embedded web server.
StopWebServer	Stops the embedded web server.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.


Connected	Fired immediately after a connection completes (or fails).
ConnectionStatus	Fired to indicate changes in the connection state.
Disconnected	Fired when a connection is closed.
EndTransfer	Fired when a document finishes transferring.
Error	Fired when information is available about errors during data delivery.
Header	Fired every time a header line comes in.
LaunchBrowser	Fires before launching a browser with the authorization URL.
Log	Fired once for each log message.
Redirect	Fired when a redirection is received from the server.
ReturnURL	Fired when the user is redirected to the embedded web server.
SetCookie	Fired for every cookie set by the server.
SSLServerAuthentication	Fired after the server presents its certificate to the client.
SSLStatus	Fired when secure connection progress messages are available.
StartTransfer	Fired when a document starts transferring (after the headers).
Status	Fired when the HTTP status line is received from the server.
Transfer	Fired while a document transfers (delivers document).

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.


AuthMethod	Specifies how the client credentials are sent to the token server.
AuthorizationTokenType	The type of access token returned.
BrowserResponseTimeout	Specifies the amount of time to wait for a response from the browser.
DeviceGrantType	The grant type to be used when the ClientProfile is set to ocpDevice.
DeviceUserCode	The device's user code when the ClientProfile is set to ocpDevice.
FormVarCount	Specifies the number of additional form variables to include in the request.
FormVarName[i]	Specifies the form variable name at the specified index.
FormVarValue[i]	Specifies the form variable value at the specified index.
IncludeClientCredsInBody	Whether to include the client credentials in the header or request body.
IncludeEmptyRedirectURI	Whether an empty redirect_uri parameter is included in requests.
JWTAudience	The JWT audience when the ClientProfile is set to ocpJWT.
JWTCertStore	The name of the certificate store for the JWT signing certificate.
JWTCertStorePassword	The JWT signing certificate password.
JWTCertStoreType	The type of certificate store.
JWTCertSubject	The JWT signing certificate subject.
JWTIssuer	The JWT issuer when the ClientProfile is set to ocpJWT.
JWTJSONKey	The data or file path of the JWT JSON Key.
JWTPayload	The payload of the JWT access token, if present.
JWTServiceProvider	The service provider to which authentication is being performed.
JWTSignatureAlgorithm	The signature algorithm used to sign the JWT.
JWTSubject	The subject field in the JWT.
JWTValidityTime	The amount of time in seconds for which the assertion in the JWT is valid.
JWTXChildCount	The number of child elements of the current element.
JWTXChildName[i]	The name of the child element.
JWTXChildXText[i]	The inner text of the child element.
JWTXElement	The name of the current element.
JWTXParent	The parent of the current element.
JWTXPath	Points to a specific element in the returned payload of a JWT based access token.
JWTXSubTree	A snapshot of the current element in the document.
JWTXText	The text of the current element.
Microsoft365AdminConsentError	The error message returned when the admin denies consent to the scopes.
Microsoft365AdminConsentErrorDesc	The error description returned when the admin denies consent to the scopes.
Microsoft365AdminConsentTenant	The tenant ID returned after the admin consents to the scopes.
Office365ServiceAPIVersion	The API version of the Office 365 service being discovered.
Office365ServiceCapability	The API capability of the Office 365 service being discovered.
Office365ServiceEndpoint	The Office 365 endpoint for the service that matches the criteria specified.
PasswordGrantUsername	The Username field when using the password grant type.
PKCEChallengeEncoding	The PKCE code challenge method to use.
PKCEVerifier	The PKCE verifier used to generate the challenge.
PollingInterval	The interval in seconds between polling requests when the device client profile is used.
ResponseCompanyImage	A URL or full path to a company logo.
ResponseCompanyURL	A URL to the company website or similar resource.
ResponseFailureHeading	Short header text indicating failure.
ResponseFailureMessage	A description for a failed authorization.
ResponseHelpURL	A URL to a help page or other resource.
ResponseLicenseURL	A URL to licensing terms.
ResponseProductImage	A URL or full path to a product image.
ResponseProductURL	A URL to a product page or similar resource.
ResponseSuccessHeading	Short header text indicating success.
ResponseSuccessMessage	A description for a successful authorization.
ReUseWebServer	Determines if the same server instance is used between requests.
TokenInfoFieldCount	The number of fields in the tokeninfo service response.
TokenInfoFieldName[i]	The name of the tokeninfo service response field.
TokenInfoFieldValue[i]	The value of the tokeninfo service response field.
TokenInfoURL	The URL of the tokeninfo service.
ValidateToken	Validates the specified access token with a tokeninfo service.
WebServerFailedResponse	The custom response that will be displayed to the user if authentication failed.
WebServerHost	The hostname used by the embedded web server displayed in the ReturnURL.
WebServerResponse	The custom response that is displayed to the user.
AcceptEncoding	Used to tell the server which types of content encodings the client supports.
AllowHTTPCompression	This property enables HTTP compression for receiving data.
AllowHTTPFallback	Whether HTTP/2 connections are permitted to fallback to HTTP/1.1.
Append	Whether to append data to LocalFile.
Authorization	The Authorization string to be sent to the server.
BytesTransferred	Contains the number of bytes transferred in the response data.
ChunkSize	Specifies the chunk size in bytes when using chunked encoding.
CompressHTTPRequest	Set to true to compress the body of a PUT or POST request.
EncodeURL	If set to True the URL will be encoded by the class.
FollowRedirects	Determines what happens when the server issues a redirect.
GetOn302Redirect	If set to True the class will perform a GET on the new location.
HTTP2HeadersWithoutIndexing	HTTP2 headers that should not update the dynamic header table with incremental indexing.
HTTPVersion	The version of HTTP used by the class.
IfModifiedSince	A date determining the maximum age of the desired document.
KeepAlive	Determines whether the HTTP connection is closed after completion of the request.
KerberosSPN	The Service Principal Name for the Kerberos Domain Controller.
LogLevel	The level of detail that is logged.
MaxRedirectAttempts	Limits the number of redirects that are followed in a request.
NegotiatedHTTPVersion	The negotiated HTTP version.
OtherHeaders	Other headers as determined by the user (optional).
ProxyAuthorization	The authorization string to be sent to the proxy server.
ProxyAuthScheme	The authorization scheme to be used for the proxy.
ProxyPassword	A password if authentication is to be used for the proxy.
ProxyPort	Port for the proxy server (default 80).
ProxyServer	Name or IP address of a proxy server (optional).
ProxyUser	A user name if authentication is to be used for the proxy.
SentHeaders	The full set of headers as sent by the client.
StatusCode	The status code of the last response from the server.
StatusLine	The first line of the last response from the server.
TransferredData	The contents of the last response from the server.
TransferredDataLimit	The maximum number of incoming bytes to be stored by the class.
TransferredHeaders	The full set of headers as received from the server.
TransferredRequest	The full request as sent by the client.
UseChunkedEncoding	Enables or Disables HTTP chunked encoding for transfers.
UseIDNs	Whether to encode hostnames to internationalized domain names.
UseProxyAutoConfigURL	Whether to use a Proxy auto-config file when attempting a connection.
UserAgent	Information about the user agent (browser).
ConnectionTimeout	Sets a separate timeout value for establishing a connection.
FirewallAutoDetect	Tells the class whether or not to automatically detect and use firewall system settings, if available.
FirewallHost	Name or IP address of firewall (optional).
FirewallPassword	Password to be used if authentication is to be used when connecting through the firewall.
FirewallPort	The TCP port for the FirewallHost;.
FirewallType	Determines the type of firewall to connect through.
FirewallUser	A user name if authentication is to be used connecting through a firewall.
KeepAliveInterval	The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTime	The inactivity time in milliseconds before a TCP keep-alive packet is sent.
Linger	When set to True, connections are terminated gracefully.
LingerTime	Time in seconds to have the connection linger.
LocalHost	The name of the local host through which connections are initiated or accepted.
LocalPort	The port in the local host where the class binds.
MaxLineLength	The maximum amount of data to accumulate when no EOL is found.
MaxTransferRate	The transfer rate limit in bytes per second.
ProxyExceptionsList	A semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAlive	Determines whether or not the keep alive socket option is enabled.
TcpNoDelay	Whether or not to delay when sending packets.
UseIPv6	Whether to use IPv6.
LogSSLPackets	Controls whether SSL packets are logged when using the internal security API.
OpenSSLCADir	The path to a directory containing CA certificates.
OpenSSLCAFile	Name of the file containing the list of CA's trusted by your application.
OpenSSLCipherList	A string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedData	The data to seed the pseudo random number generator (PRNG).
ReuseSSLSession	Determines if the SSL session is reused.
SSLAcceptAnyServerCert	Whether to trust any certificate presented by the server.
SSLCACerts	A newline separated list of CA certificates to be included when performing an SSL handshake.
SSLCipherStrength	The minimum cipher strength used for bulk encryption.
SSLClientCACerts	A newline separated list of CA certificates to use during SSL client certificate validation.
SSLEnabledCipherSuites	The cipher suite to be used in an SSL negotiation.
SSLEnabledProtocols	Used to enable/disable the supported security protocols.
SSLEnableRenegotiation	Whether the renegotiation_info SSL extension is supported.
SSLIncludeCertChain	Whether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFile	The location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipher	Returns the negotiated cipher suite.
SSLNegotiatedCipherStrength	Returns the negotiated cipher suite strength.
SSLNegotiatedCipherSuite	Returns the negotiated cipher suite.
SSLNegotiatedKeyExchange	Returns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrength	Returns the negotiated key exchange algorithm strength.
SSLNegotiatedVersion	Returns the negotiated protocol version.
SSLSecurityFlags	Flags that control certificate verification.
SSLServerCACerts	A newline separated list of CA certificates to use during SSL server certificate validation.
TLS12SignatureAlgorithms	Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroups	The supported groups for ECC.
TLS13KeyShareGroups	The groups for which to pregenerate key shares.
TLS13SignatureAlgorithms	The allowed certificate signature algorithms.
TLS13SupportedGroups	The supported groups for (EC)DHE key exchange.
AbsoluteTimeout	Determines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallData	Used to send extra data to the firewall.
InBufferSize	The size in bytes of the incoming queue of the socket.
OutBufferSize	The size in bytes of the outgoing queue of the socket.
BuildInfo	Information about the product's build.
CodePage	The system code page used for Unicode to Multibyte translations.
LicenseInfo	Information about the current license.
MaskSensitiveData	Whether sensitive data is masked in log messages.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

OAuth.AccessToken Property

The access token returned by the authorization server.

Syntax

getAccessToken(): string;
setAccessToken(accessToken: string): void;

Default Value

Remarks

This property will be populated with the access token returned by the authorization server after a call to GetAuthorization. This will be the raw access token, whereas the return value from the GetAuthorization method will also include the required data so that it can be passed directly to the Authorization property of other components or added as the value of the authorization header in another client implementation.

OAuth.AccessTokenExp Property

The lifetime of the access token.

Syntax

getAccessTokenExp(): number;

Default Value

Remarks

This setting holds the lifetime of the access token in seconds. For instance the value 3600 indicates that the token will expire in one hour from the time it was generated.

This property is read-only.

OAuth.AuthorizationCode Property

The authorization code that is exchanged for an access token.

Syntax

getAuthorizationCode(): string;
setAuthorizationCode(authorizationCode: string): void;

Default Value

Remarks

This property is used with the AuthorizationCode GrantType. When ClientProfile is set to ocpApplication (Application flow), this property will be informational only, as the GetAuthorization method will automatically exchange this code for a token with the authorization server specified in ServerTokenURL.

When ClientProfile is set to ocpWeb (Web flow), this property needs to be set to the authorization code returned from the authorization server. Typically, this value is parsed when the service redirects the user back to your website. See ClientProfile for more information.

If this property is set before calling GetAuthorization, the class will not make a request to the authorization sever and instead will attempt to exchange the code with the authorization server for an access token.

This property is not available at design time.

OAuth.AuthorizationScope Property

The scope request or response parameter used during authorization.

Syntax

getAuthorizationScope(): string;
setAuthorizationScope(authorizationScope: string): void;

Default Value

Remarks

If the scope is not set, the authorization server will use the default access scope for your application as determined by the server. To request a specific access scope, set this property to a space-separated list of strings as defined by the authorization server.

After calling GetAuthorization, this property will be updated with the scope sent in the response from the server and will indicate the scope that was actually granted.

OAuth.ClientId Property

The Id of the client assigned when registering the application.

Syntax

getClientId(): string;
setClientId(clientId: string): void;

Default Value

Remarks

This property holds the Id of the client that was assigned when initially registering the application with the authorization server. This value must be specified before calling GetAuthorization or GetAuthorizationURL.

OAuth.ClientProfile Property

The type of client that is requesting authorization.

Syntax

getClientProfile(): OAuthClientProfiles;
setClientProfile(clientProfile: OAuthClientProfiles): void;

enum OAuthClientProfiles {
  ocpApplication,
  ocpWeb,
  ocpDevice,
  ocpMobile,
  ocpJWT
}

Default Value

Remarks

This defines the type of client that will be requesting authorization. Set this before calling GetAuthorization to inform the class to act accordingly. Possible values are as follows:


0 (ocpApplication - default)	User application, such as a Windows form application
1 (ocpWeb)	Server-side application, such as a website
2 (ocpDevice)	Device application without a browser, such as a game console
3 (ocpMobile)	Mobile application with browser support, such as a smart phone or tablet
4 (ocpBrowser)	Client-side browser application, such as JavaScript
5 (ocpJWT)	Server-to-Server authentication using a JWT Bearer Token

Application Profile

Fourth, the class will then automatically exchange the grant that was returned by the authorization server for the access token using the HTTP endpoint specified in ServerTokenURL.

Web Profile

Second, call GetAuthorizationURL. This will return a URL to which the user should be redirected. Redirect the user to this URL.

Device Profile

Third, at this time, call GetAuthorization. The class will begin polling the server specified in ServerTokenURL. The polling interval is specified (in seconds) by the PollingInterval setting.

Mobile Profile

JWT Bearer Token (Server-to-Server) Profile

First, specify AuthorizationScope ServerTokenURL and JWTServiceProvider.

JWTIssuer (required)
JWTAudience (required)
JWTCertStoreType (required)
JWTCertStore (required)
JWTCertStorePassword (required)
JWTCertSubject (required)
JWTSubject
JWTValidityTime
JWTSignatureAlgorithm

Additional fields may be added to the JWT using the AddParam method.

OAuth.ClientSecret Property

The secret value for the client assigned when registering the application.

Syntax

getClientSecret(): string;
setClientSecret(clientSecret: string): void;

Default Value

Remarks

This property holds the secret of the client that was assigned when initially registering the application with the authorization server. This value must be specified before calling GetAuthorization or GetAuthorizationURL.

OAuth.Connected Property

Whether the class is connected.

Syntax

isConnected(): boolean;

Default Value

FALSE

Remarks

This property is used to determine whether or not the class is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.

This property is read-only and not available at design time.

OAuth.Cookies Property

A collection of cookies.

Syntax

getCookies(): HTTPCookieList;
setCookies(cookies: HTTPCookieList): void;

Default Value

Remarks

This property contains a collection of cookies. To add cookies to outgoing HTTP requests, add cookies (of type HTTPCookie) to this collection.

To see cookies that are set by the server, use the SetCookie event, which displays the cookies and their properties as set by the server. Those cookies also are added to Cookies.

MaxHTTPCookies can be used to control the maximum number of cookies saved.

This property is not available at design time.

Please refer to the HTTPCookie type for a complete list of fields.

OAuth.Firewall Property

A set of properties related to firewall access.

Syntax

getFirewall(): Firewall;
setFirewall(firewall: Firewall): void;

Default Value

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the class will attempt to connect.

Please refer to the Firewall type for a complete list of fields.

OAuth.FollowRedirects Property

Determines what happens when the server issues a redirect.

Syntax

getFollowRedirects(): OAuthFollowRedirects;
setFollowRedirects(followRedirects: OAuthFollowRedirects): void;

enum OAuthFollowRedirects {
  frNever,
  frAlways,
  frSameScheme
}

Default Value

Remarks

This property determines what happens when the server issues a redirect. Normally, the class returns an error if the server responds with an "Object Moved" message. If this property is set to frAlways (1), the new URL for the object is retrieved automatically every time.

If this property is set to frSameScheme (2), the new URL is retrieved automatically only if the URLScheme is the same; otherwise, the class .

Note: Following the HTTP specification, unless this property is set to frAlways (1), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty. If, however, this property is set to frAlways (1), the same credentials are used to connect to the new server.

A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).

The default value is frNever (0). In this case, redirects are never followed, and the class instead.

OAuth.GrantType Property

The OAuth grant type used to acquire an OAuth access token.

Syntax

getGrantType(): OAuthGrantTypes;
setGrantType(grantType: OAuthGrantTypes): void;

enum OAuthGrantTypes {
  ogtAuthorizationCode,
  ogtImplicit,
  ogtPassword,
  ogtClientCredentials,
  ogtAdminConsent
}

Default Value

Remarks

This setting specifies the type of grant to obtain. In most cases the Authorization Code grant type (default) is used, so it is typically not necessary to change this. The supported values are:


0 (ogtAuthorizationCode - Default)	Authorization Code grant type
1 (ogtImplicit)	Implicit grant type
2 (ogtPassword)	Resource Owner Password Credentials grant type
3 (ogtClientCredentials)	Client Credentials grant type
4 (ogtAdminConsent)	Admin consent for Microsoft API application scopes

For all grant types listed set ClientProfile to Application.

The Authorization Code grant is the most commonly used grant type. It follows the flow described for the Application Client Profile section in the OAuth introduction page.

Implicit grants are similar to Authorization Code, except that a Bearer token is returned directly from the authorization server without requiring a second step to exchange a code for a bearer token. To use this grant type set:

ClientId
ClientSecret
ServerAuthURL

And call GetAuthorization.

The Resource Owner Password Credentials grant type may be used to authenticate on behalf of a resource owner with the owner's credentials. Authentication is performed directly and the user is not prompted to authenticate the application. To use this grant type set:

PasswordGrantUsername to the username of the resource owner
ClientSecret to the password of the resource owner
ClientId optional, set to the client id for the resource
ServerTokenURL

And call GetAuthorization.

The Client Credentials grant type is typically used for server-to-server authentication. The client authenticates directly to the authentication server and receives a token without any user interaction. To use this grant type set:

ClientId
ClientSecret
ServerTokenURL

And call GetAuthorization.

The AdminConsent grant type is used when setting up application permissions for apps that authenticate to Microsoft. To use this grant type set:

ClientId

And call GetAuthorization. The class will then start the embedded web server, fire the LaunchBrowser event, and open the admin consent page URL.

If the Admin consents to the scopes, the tenant ID can be accessed through the Microsoft365AdminConsentTenant configuration and is often needed for authenticating a client later (eg. Client Credentials Grant Flow). Once the Admin consents once, they typically will not need to go through the process again unless the scopes of the application change.

If the Admin does not consent to the scopes, the error message can be found in the Microsoft365AdminConsentError configuration setting and the error description can be found in the Microsoft365AdminConsentErrorDesc configuration setting.

OAuth.Idle Property

The current status of the class.

Syntax

isIdle(): boolean;

Default Value

TRUE

Remarks

This property will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.

This property is read-only.

OAuth.LocalHost Property

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

getLocalHost(): string;
setLocalHost(localHost: string): void;

Default Value

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

OAuth.OtherHeaders Property

Other headers as determined by the user (optional).

Syntax

getOtherHeaders(): string;
setOtherHeaders(otherHeaders: string): void;

Default Value

Remarks

This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like ContentType and From.

The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by .

Use this property with caution. If this property contains invalid headers, HTTP requests may fail.

This property is useful for extending the functionality of the class beyond what is provided.

This property is not available at design time.

OAuth.Params Property

The parameters to be included in the request to the authorization server or received in the response.

Syntax

getParams(): OAuthParamList;
setParams(params: OAuthParamList): void;

Default Value

Remarks

This property is a collection of query string parameters to be added in the request when creating the authorization URL. This will also hold the parameters returned in the response.

This property is not available at design time.

Please refer to the OAuthParam type for a complete list of fields.

OAuth.Proxy Property

A set of properties related to proxy access.

Syntax

getProxy(): Proxy;
setProxy(proxy: Proxy): void;

Default Value

Remarks

This property contains fields describing the proxy through which the class will attempt to connect.

Please refer to the Proxy type for a complete list of fields.

OAuth.RefreshToken Property

The refresh token received from or sent to the authorization server.

Syntax

getRefreshToken(): string;
setRefreshToken(refreshToken: string): void;

Default Value

Remarks

When GetAuthorization is called, if the authorization server returns a refresh token along with the access token, this property will hold the refresh token. Save this value for later use.

When your access token expires, set this property to the corresponding refresh token. Then call GetAuthorization, and the class will use this token to retrieve a new access token. The new authorization string will be returned by the GetAuthorization method. No user interaction is required when refreshing an access token.

OAuth.ReturnURL Property

The URL where the user (browser) returns after authenticating.

Syntax

getReturnURL(): string;
setReturnURL(returnURL: string): void;

Default Value

Remarks

When ClientProfile is set to ocpApplication, this will be automatically set to the address of the local embedded web server. In that case, this property can be inspected to determine the URL where the user will be redirected, but it does not need to be set.

When calling GetAuthorizationURL, which is common when ClientProfile is set to ocpWeb, set this property to the URL on your server where the user will be redirected after authenticating with the authorization server.

This property corresponds to the redirect_uri query string parameter.

OAuth.ServerAuthURL Property

The URL of the authorization server.

Syntax

getServerAuthURL(): string;
setServerAuthURL(serverAuthURL: string): void;

Default Value

Remarks

This property specifies the URL of the authorization server used when GetAuthorization is called. This value is used when constructing the URL to which the user will be redirected to authenticate and grant access.

This should be specified before calling GetAuthorization.

OAuth.ServerTokenURL Property

The URL used to obtain the access token.

Syntax

getServerTokenURL(): string;
setServerTokenURL(serverTokenURL: string): void;

Default Value

Remarks

The property specifies the URL where the grant will be exchanged for the access token. This is typically a separate HTTP endpoint on the authorization server.

This must be set before calling GetAuthorization.

OAuth.SSLAcceptServerCert Property

Instructs the class to unconditionally accept the server certificate that matches the supplied certificate.

Syntax

getSSLAcceptServerCert(): Certificate;
setSSLAcceptServerCert(SSLAcceptServerCert: Certificate): void;

Default Value

Remarks

If it finds any issues with the certificate presented by the server, the class will normally terminate the connection with an error.

You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

Note: This functionality is provided only for cases in which you otherwise know that you are communicating with the right server. If used improperly, this property may create a security breach. Use it at your own risk.

Please refer to the Certificate type for a complete list of fields.

OAuth.SSLCert Property

The certificate to be used during Secure Sockets Layer (SSL) negotiation.

Syntax

getSSLCert(): Certificate;
setSSLCert(SSLCert: Certificate): void;

Default Value

Remarks

This property includes the digital certificate that the class will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the field to the encoded certificate. To select a certificate, use the store and subject fields.

Please refer to the Certificate type for a complete list of fields.

OAuth.SSLProvider Property

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

getSSLProvider(): OAuthSSLProviders;
setSSLProvider(SSLProvider: OAuthSSLProviders): void;

enum OAuthSSLProviders {
  sslpAutomatic,
  sslpPlatform,
  sslpInternal
}

Default Value

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:


0 (sslpAutomatic - default)	Automatically selects the appropriate implementation.
1 (sslpPlatform)	Uses the platform/system implementation.
2 (sslpInternal)	Uses the internal implementation.

Additional Notes

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected, the platform implementation will be used by default in all cases in the JavaScript edition.

Note: The internal provider is not support at this time.

OAuth.SSLServerCert Property

The server certificate for the last established connection.

Syntax

getSSLServerCert(): Certificate;

Default Value

Remarks

This property contains the server certificate for the last established connection.

SSLServerCert is reset every time a new connection is attempted.

This property is read-only.

Please refer to the Certificate type for a complete list of fields.

OAuth.Timeout Property

The timeout for the class.

Syntax

getTimeout(): number;
setTimeout(timeout: number): void;

Default Value

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the class .

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

OAuth.TransferredData Property

The contents of the last response from the server.

Syntax

getTransferredData(): Uint8Array;

Default Value

Remarks

This property contains the contents of the last response from the server.

TransferredDataLimit controls the maximum amount of data accumulated in TransferredData (by default, there is no limit).

This property is read-only and not available at design time.

OAuth.TransferredHeaders Property

The full set of headers as received from the server.

Syntax

getTransferredHeaders(): string;

Default Value

Remarks

This property returns the complete set of raw headers as received from the server.

The Header event shows the individual headers as parsed by the class.

This property is read-only and not available at design time.

OAuth.UsePKCE Property

Whether Proof Key for Code Exchange (PKCE) should be used.

Syntax

isUsePKCE(): boolean;
setUsePKCE(usePKCE: boolean): void;

Default Value

FALSE

Remarks

If specified, Proof Key for Code Exchange (PKCE) defined by RFC 7636 will be used when GetAuthorization is called. This applies when using the Authorization Code GrantType. The PKCEChallengeEncoding configuration setting can be used to control the code challenge method that will be used. When using the ocpWeb ClientProfile, the PKCEVerifier configuration setting can be used to get/set the verifier that was used to generate the challenge. See the PKCEVerifier documentation for more information.

OAuth.WebServerPort Property

The local port on which the embedded web server listens.

Syntax

getWebServerPort(): number;
setWebServerPort(webServerPort: number): void;

Default Value

Remarks

This property specifies the port on which the embedded web server listens. Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be returned when this setting is queried after the server has started listening. This is applicable only when using the embedded web server.

OAuth.WebServerSSLCert Property

The certificate with the private key to use when a Secure Sockets Layer (SSL) is enabled.

Syntax

getWebServerSSLCert(): Certificate;
setWebServerSSLCert(webServerSSLCert: Certificate): void;

Default Value

Remarks

This property specifies the certificate with the private key to use when the embedded web server is used. This setting is applicable only when WebServerSSLEnabled is set to True.

Please refer to the Certificate type for a complete list of fields.

OAuth.WebServerSSLEnabled Property

Whether the web server requires Secure Sockets Layer (SSL) connections.

Syntax

isWebServerSSLEnabled(): boolean;
setWebServerSSLEnabled(webServerSSLEnabled: boolean): void;

Default Value

FALSE

Remarks

This setting specifies whether the embedded web server uses a Secure Sockets Layer (SSL). If set to True, WebServerSSLCert is required and the server will accept only SSL connections. If set to False, only plaintext connects are supported.

OAuth.addCookie Method

Adds a cookie and the corresponding value to the outgoing request headers.

Syntax

async oauth.addCookie(cookieName : string, cookieValue : string): Promise<void>

Remarks

This method adds a cookie and the corresponding value to the outgoing request headers. Please refer to the Cookies property for more information on cookies and how they are managed.

OAuth.addParam Method

Adds a name-value pair to the query string parameters of the outgoing request.

Syntax

async oauth.addParam(paramName : string, paramValue : string): Promise<void>

Remarks

This method can be used to add query string parameters to the outgoing request. One common use for this method would be to add the state parameter to the request, which can be used when the ClientProfile is ocpWeb to add user-defined data. The authorization server will include the state parameter in the response and will be available in the post back to your server, which will allow you to maintain state in your application.

OAuth.config Method

Sets or retrieves a configuration setting.

Syntax

async oauth.config(configurationString : string): Promise<string>

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

OAuth.doEvents Method

This method processes events from the internal message queue.

Syntax

async oauth.doEvents(): Promise<void>

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

OAuth.getAuthorization Method

Gets the authorization string required to access the protected resource.

Syntax

async oauth.getAuthorization(): Promise<string>

Remarks

This method performs several operations automatically depending on the value of ClientProfile. Please see the introduction section for the OAuth class for a detailed overview of the typical scenarios.

After authorization is completed, this method will return the authorization string, which can be passed directly to the authorization property of any other component. This can also be passed as the value of the HTTP authorization header to other implementations that access the protected resource as well.

The AccessToken property should be cleared before calling this method.

OAuth.getAuthorizationURL Method

Builds and returns the URL to which the user should be redirected for authorization.

Syntax

async oauth.getAuthorizationURL(): Promise<string>

Remarks

When this method is called, the class will return the URL used for authorization. The class will not make any connections, but instead it will return the URL to you so that you may redirect the user to this location. This is useful when ClientProfile is set to ocpWeb. Before calling this method, set the following:

ClientId
ClientSecret
ReturnURL
AuthorizationScope (optional)

OAuth.getParam Method

Gets a specific parameter from a query string.

Syntax

async oauth.getParam(paramName : string): Promise<string>

Remarks

This method can be used to get a specific parameter from a query string.

For example, when using the ocpApplication profile, this method can be used in the ReturnURL event to query the parameters that are returned from the authorization server. Then, it can be called after GetAuthorization completes to query the parameters that the token server responded with.

string authorizationString = oauth.GetAuthorization(); string stateValue = oauth.GetParam("state");

OAuth.interrupt Method

This method interrupts the current method.

Syntax

async oauth.interrupt(): Promise<void>

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

OAuth.reset Method

This method will reset the class.

Syntax

async oauth.reset(): Promise<void>

Remarks

This method will reset the class's properties to their default values.

OAuth.startWebServer Method

Starts the embedded web server.

Syntax

async oauth.startWebServer(): Promise<void>

Remarks

This method starts the embedded web server. This method can be used to manually start the embedded web server. Under normal circumstances, this is not needed as the component will automatically start and stop the web server when GetAuthorization is called. You may decide, however, to start the web server manually before calling GetAuthorization. When called, this method will also populate ReturnURL with the address of the embedded server.

OAuth.stopWebServer Method

Stops the embedded web server.

Syntax

async oauth.stopWebServer(): Promise<void>

Remarks

This method stops the embedded web server. Under normal circumstances, the web server will be stopped automatically during the authorization process when GetAuthorization is called. If ReUseWebServer is set to True, the server will not be automatically stopped, and this method must be called to stop the embedded web server.

OAuth.Connected Event

Fired immediately after a connection completes (or fails).

Syntax

oauth.on('Connected', listener: (e: {readonly statusCode: number, readonly description: string}) => void )

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

OAuth.ConnectionStatus Event

Fired to indicate changes in the connection state.

Syntax

oauth.on('ConnectionStatus', listener: (e: {readonly connectionEvent: string, readonly statusCode: number, readonly description: string}) => void )

Remarks

This event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:


	Firewall connection complete.
	Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable).
	Remote host connection complete.
	Remote host disconnected.
	SSL or S/Shell connection broken.
	Firewall host disconnected.

StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

OAuth.Disconnected Event

Fired when a connection is closed.

Syntax

oauth.on('Disconnected', listener: (e: {readonly statusCode: number, readonly description: string}) => void )

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.

Please refer to the Error Codes section for more information.

OAuth.EndTransfer Event

Fired when a document finishes transferring.

Syntax

oauth.on('EndTransfer', listener: (e: {readonly direction: number}) => void )

Remarks

This event is fired first when the client finishes sending data to the server (in a POST or PUT request) and then when the document text finishes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

OAuth.Error Event

Fired when information is available about errors during data delivery.

Syntax

oauth.on('Error', listener: (e: {readonly errorCode: number, readonly description: string}) => void )

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class .

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

OAuth.Header Event

Fired every time a header line comes in.

Syntax

oauth.on('Header', listener: (e: {readonly field: string, readonly value: string}) => void )

Remarks

The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

OAuth.LaunchBrowser Event

Fires before launching a browser with the authorization URL.

Syntax

oauth.on('LaunchBrowser', listener: (e: {URL: string, command: string}) => void )

Remarks

When the ClientProfile property is set to ocpApplication and GetAuthorization is called, the class will fire this event with the Command, which will be executed by the class. The URL parameter will be the authorization URL that the user will be directed to authenticate.

Within this event, you may override the current value of either Command or URL and provide your own value. If Command is set to an empty string, the class will not attempt to launch the browser and instead you will be responsible for directing the user to the authorization URL specified by the URL parameter.

In Windows, ShellExecute is used to execute Command, which limits the verbs available for use in Command to:

edit
explore
find
open
print

OAuth.Log Event

Fired once for each log message.

Syntax

oauth.on('Log', listener: (e: {readonly logLevel: number, readonly message: string, readonly logType: string}) => void )

Remarks

This event is fired once for each log message generated by the class. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of message. Possible values are as follows:


0 (None)	No events are logged.
1 (Info - default)	Informational events are logged.
2 (Verbose)	Detailed data are logged.
3 (Debug)	Debug data are logged.

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

Message is the log entry.

LogType identifies the type of log entry. Possible values are as follows:

"Info"
"RequestHeaders"
"ResponseHeaders"
"RequestBody"
"ResponseBody"
"ProxyRequest"
"ProxyResponse"
"FirewallRequest"
"FirewallResponse"

OAuth.Redirect Event

Fired when a redirection is received from the server.

Syntax

oauth.on('Redirect', listener: (e: {readonly location: string, accept: boolean}) => void )

Remarks

This event is fired in cases in which the client can decide whether or not to continue with the redirection process. The Accept parameter is always True by default, but if you do not want to follow the redirection, Accept may be set to False, in which case the class . Location is the location to which the client is being redirected. Further control over redirection is provided in the FollowRedirects property.

OAuth.ReturnURL Event

Fired when the user is redirected to the embedded web server.

Syntax

oauth.on('ReturnURL', listener: (e: {readonly URLPath: string, readonly queryString: string, responseHeaders: string, responseBody: string}) => void )

Remarks

When ClientProfile is set to ocpApplication and the embedded web server is used (default), this event will fire when the user is redirected from the authorization server back to the local embedded web server. The event provides an opportunity to set the ResponseHeaders and ResponseBody and to provide a custom response that the user will see in their browser.

URLPath and QueryString are informational parameters that show the values sent by the authorization server.

Additionally, the Params properties will be populated. This allows the GetParam method to be used to get a specific parameter returned from the authorization server when used within this event.

OAuth.SetCookie Event

Fired for every cookie set by the server.

Syntax

oauth.on('SetCookie', listener: (e: {readonly name: string, readonly value: string, readonly expires: string, readonly domain: string, readonly path: string, readonly secure: boolean}) => void )

Remarks

This event is fired for every Set-Cookie: header received from the HTTP server.

The Name parameter contains the name of the cookie, with the corresponding value supplied in the Value parameter.

The Expires parameter contains an expiration time for the cookie (if provided by the server). The time format used is "Weekday, DD-Mon-YY HH:MM:SS GMT". If the server does not provide an expiration time, the Expires parameter will be an empty string. In this case, the convention is to drop the cookie at the end of the session.

The Domain parameter contains a domain name to limit the cookie to (if provided by the server). If the server does not provide a domain name, the Domain parameter will be an empty string. The convention in this case is to use the server specified in the URL (URLServer) as the cookie domain.

The Path parameter contains a path name to limit the cookie to (if provided by the server). If the server does not provide a cookie path, the Path parameter will be an empty string. The convention in this case is to use the path specified in the URL (URLPath) as the cookie path.

The Secure parameter specifies whether the cookie is secure. If the value of this parameter is True, the cookie value must be submitted only through a secure (HTTPS) connection.

OAuth.SSLServerAuthentication Event

Fired after the server presents its certificate to the client.

Syntax

oauth.on('SSLServerAuthentication', listener: (e: {readonly certEncoded: string, readonly certEncodedB: Uint8Array, readonly certSubject: string, readonly certIssuer: string, readonly status: string, accept: boolean}) => void )

Remarks

This event fires with information about the server certificate. The Status property shows why verification failed (otherwise, Status contains the string OK). To manually accept an untrusted certificate, the SSLAcceptAnyServerCert setting must be set to True before initiating the connection.

OAuth.SSLStatus Event

Fired when secure connection progress messages are available.

Syntax

oauth.on('SSLStatus', listener: (e: {readonly message: string}) => void )

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

OAuth.StartTransfer Event

Fired when a document starts transferring (after the headers).

Syntax

oauth.on('StartTransfer', listener: (e: {readonly direction: number}) => void )

Remarks

This event is fired first when the client starts sending data to the server (in a POST or PUT request) and then when the document text starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

OAuth.Status Event

Fired when the HTTP status line is received from the server.

Syntax

oauth.on('Status', listener: (e: {readonly HTTPVersion: string, readonly statusCode: number, readonly description: string}) => void )

Remarks

HTTPVersion is a string containing the HTTP version string as returned from the server (e.g., "1.1").

StatusCode contains the HTTP status code (e.g., 200), and Description the associated message returned by the server (e.g., "OK").

OAuth.Transfer Event

Fired while a document transfers (delivers document).

Syntax

oauth.on('Transfer', listener: (e: {readonly direction: number, readonly bytesTransferred: number, readonly percentDone: number, readonly text: string, readonly textB: Uint8Array}) => void )

Remarks

The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.

The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

The following fields are available:

Fields

EffectiveDate
string (read-only)
Default Value: ""

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

ExpirationDate
string (read-only)
Default Value: ""

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

ExtendedKeyUsage
string (read-only)
Default Value: ""

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

Fingerprint
string (read-only)
Default Value: ""

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

FingerprintSHA1
string (read-only)
Default Value: ""

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

FingerprintSHA256
string (read-only)
Default Value: ""

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

Issuer
string (read-only)
Default Value: ""

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

KeyPassword
string
Default Value: ""

The password for the certificate's private key (if any).

Some certificate stores may individually protect certificates' private keys, separate from the standard protection offered by the . This property can be used to read such password-protected private keys.

Note: This property defaults to the value of . To clear it, you must set the property to the empty string (""). It can be set at any time, but when the private key's password is different from the store's password, then it must be set before calling .

PrivateKey
string (read-only)
Default Value: ""

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The may be available but not exportable. In this case, returns an empty string.

PrivateKeyAvailable
boolean (read-only)
Default Value: False

Whether a is available for the selected certificate. If is True, the certificate may be used for authentication purposes (e.g., server authentication).

PrivateKeyContainer
string (read-only)
Default Value: ""

The name of the container for the certificate (if available). This functionality is available only on Windows platforms.

PublicKey
string (read-only)
Default Value: ""

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

PublicKeyAlgorithm
string (read-only)
Default Value: ""

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

PublicKeyLength
number (read-only)
Default Value: 0

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

SerialNumber
string (read-only)
Default Value: ""

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

SignatureAlgorithm
string (read-only)
Default Value: ""

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

Store
string
Default Value: "MY"

The name of the certificate store for the client certificate.

The property denotes the type of the certificate store specified by . If the store is password-protected, specify the password in .

is used in conjunction with the property to specify client certificates. If has a value, and or is set, a search for a certificate is initiated. Please see the property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StoreB
Uint8Array
Default Value: "MY"

The name of the certificate store for the client certificate.

The property denotes the type of the certificate store specified by . If the store is password-protected, specify the password in .

is used in conjunction with the property to specify client certificates. If has a value, and or is set, a search for a certificate is initiated. Please see the property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

StorePassword
string
Default Value: ""

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

StoreType
CertStoreTypes
Default Value: 0

The type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: This store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CERTMGR class. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the and set to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

SubjectAltNames
string (read-only)
Default Value: ""

Comma-separated lists of alternative subject names for the certificate.

ThumbprintMD5
string (read-only)
Default Value: ""

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA1
string (read-only)
Default Value: ""

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA256
string (read-only)
Default Value: ""

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

Usage
string (read-only)
Default Value: ""

The text description of .

This value will be one or more of the following strings and will be separated by commas:

Digital Signature
Non-Repudiation
Key Encipherment
Data Encipherment
Key Agreement
Certificate Signing
CRL Signing
Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

UsageFlags
number (read-only)
Default Value: 0

The flags that show intended use for the certificate. The value of is a combination of the following flags:


0x80	Digital Signature
0x40	Non-Repudiation
0x20	Key Encipherment
0x10	Data Encipherment
0x08	Key Agreement
0x04	Certificate Signing
0x02	CRL Signing
0x01	Encipher Only

Please see the property for a text representation of .

This functionality currently is not available when the provider is OpenSSL.

Version
string (read-only)
Default Value: ""

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

Subject
string
Default Value: ""

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

Encoded
string
Default Value: ""

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The and properties also may be used to specify a certificate.

When is set, a search is initiated in the current for the private key of the certificate. If the key is found, is updated to reflect the full subject of the selected certificate; otherwise, is set to an empty string.

EncodedB
Uint8Array
Default Value: ""

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The and properties also may be used to specify a certificate.

Constructors

public Certificate();

Creates a instance whose properties can be set. This is useful for use with when generating new certificates.

public Certificate(String certificateFile);

Opens CertificateFile and reads out the contents as an X.509 public key.

public Certificate(byte[] encoded);

Parses Encoded as an X.509 public key.

public Certificate(int storeType, String store, String storePassword, String subject);

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

public Certificate(int storeType, String store, String storePassword, String subject, String configurationString);

ConfigurationString is a newline-separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CryptoAPI option. The default value is True (the key is persisted). "Thumbprint" - an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to the cstUser , cstMachine , cstPublicKeyFile , and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations.

public Certificate(int storeType, String store, String storePassword, byte[] encoded);

After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

public Certificate(int storeType, byte[] store, String storePassword, String subject);

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a byte array containing the certificate data. StorePassword is the password used to protect the store.

public Certificate(int storeType, byte[] store, String storePassword, String subject, String configurationString);

public Certificate(int storeType, byte[] store, String storePassword, byte[] encoded);

After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

Firewall Type

The firewall the class will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall and the .

The following fields are available:

Fields

AutoDetect
boolean
Default Value: False

Whether to automatically detect and use firewall system settings, if available.

FirewallType
FirewallTypes
Default Value: 0

The type of firewall to connect through. The applicable values are as follows:


fwNone (0)	No firewall (default setting).
fwTunnel (1)	Connect through a tunneling proxy. is set to 80.
fwSOCKS4 (2)	Connect through a SOCKS4 Proxy. is set to 1080.
fwSOCKS5 (3)	Connect through a SOCKS5 Proxy. is set to 1080.
fwSOCKS4A (10)	Connect through a SOCKS4A Proxy. is set to 1080.

Host
string
Default Value: ""

The name or IP address of the firewall (optional). If a is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class .

Password
string
Default Value: ""

A password if authentication is to be used when connecting through the firewall. If is specified, the and properties are used to connect and authenticate to the given firewall. If the authentication fails, the class .

Port
number
Default Value: 0

The Transmission Control Protocol (TCP) port for the firewall . See the description of the property for details.

Note: This property is set automatically when is set to a valid value. See the description of the property for details.

User
string
Default Value: ""

A username if authentication is to be used when connecting through a firewall. If is specified, this property and the property are used to connect and authenticate to the given Firewall. If the authentication fails, the class .

Constructors

public Firewall();

HTTPCookie Type

An HTTP cookie can be either sent to or received from the server.

Remarks

An HTTP cookie can store the cookies that are to be sent to the server. It also may store the cookies sent by the server.

Cookies that are to be sent to the server must have the and fields supplied before submitting the URL. When the SetCookie event is fired, however, all of the fields of an HTTPCookie are filled out accordingly.

The following fields are available:

Fields

Domain
string (read-only)
Default Value: ""

The domain of a received cookie. This property contains a domain name to limit the cookie to (if provided by the server). If the server does not provide a domain name, this property will contain an empty string. The convention in this case is to use the server name specified by URLServer as the cookie domain.

Expiration
string (read-only)
Default Value: ""

An expiration time for the cookie (if provided by the server). The time format used is "Weekday, DD-Mon-YY HH:MM:SS GMT". If the server does not provide an expiration time, this property will contain an empty string. The convention is to drop the cookie at the end of the session.

Name
string
Default Value: ""

The name of the cookie.

This property, along with , stores the cookie that is to be sent to the server. The SetCookie event displays the cookies sent by the server and their properties.

Path
string (read-only)
Default Value: ""

A path name to limit the cookie to (if provided by the server). If the server does not provide a cookie path, the path property will be an empty string. The convention in this case is to use the path specified by URLPath as the cookie path.

Secure
boolean (read-only)
Default Value: False

The security flag of the received cookie. This property specifies whether the cookie is secure. If the value of this property is True, the cookie value must be submitted only through a secure (HTTPS) connection.

Value
string
Default Value: ""

The value of the cookie. A corresponding value is associated with the cookie specified by . This property holds that value.

The SetCookie event provides the cookies set by the server.

Constructors

public HTTPCookie();

public HTTPCookie(String name, String value);

OAuthParam Type

This is the parameter to be used in the request or received in the response.

Remarks

This type describes a parameter that is used in a request or received in the response.

The following fields are available:

Name

Value

Fields

Name
string
Default Value: ""

The name of the parameter to be used in the request or returned in the response.

Value
string
Default Value: ""

The value of the parameter to be used in the request or returned in the response. When issuing a request, the class will URL encode the value specified here. Returned values will be automatically URL decoded.

Constructors

public OAuthParam();

public OAuthParam(String name, String value);

Proxy Type

The proxy the class will connect to.

Remarks

When connecting through a proxy, this type is used to specify different properties of the proxy, such as the and the .

The following fields are available:

Fields

AuthScheme
ProxyAuthSchemes
Default Value: 0

The type of authorization to perform when connecting to the proxy. This is used only when the and properties are set.

should be set to authNone (3) when no authentication is expected.

By default, is authBasic (0), and if the and properties are set, the class will attempt basic authentication.

If is set to authDigest (1), digest authentication will be attempted instead.

If is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token.

If is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of and .

AutoDetect
boolean
Default Value: False

Whether to automatically detect and use proxy system settings, if available. The default value is false.

Password
string
Default Value: ""

A password if authentication is to be used for the proxy.

If is set to Basic Authentication, the and properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If is set to Digest Authentication, the and properties are used to respond to the Digest Authentication challenge from the server.

If is set to NTLM Authentication, the and properties are used to authenticate through NTLM negotiation.

Port
number
Default Value: 80

The Transmission Control Protocol (TCP) port for the proxy (default 80). See the description of the property for details.

Server
string
Default Value: ""

If a proxy is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the property is set to the corresponding address. If the search is not successful, an error is returned.

SSL
ProxySSLTypes
Default Value: 0

When to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:


psAutomatic (0)	Default setting. If the URL is an `https` URL, the class will use the `psTunnel` option. If the URL is an `http` URL, the class will use the `psNever` option.
psAlways (1)	The connection is always SSL-enabled.
psNever (2)	The connection is not SSL-enabled.
psTunnel (3)	The connection is made through a tunneling (HTTP) proxy.

User
string
Default Value: ""

A username if authentication is to be used for the proxy.

If is set to Basic Authentication, the and properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If is set to Digest Authentication, the and properties are used to respond to the Digest Authentication challenge from the server.

If is set to NTLM Authentication, the and properties are used to authenticate through NTLM negotiation.

Constructors

public Proxy();

public Proxy(String server, int port);

public Proxy(String server, int port, String user, String password);

Config Settings (class cloudmail.oauth)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

OAuth Config Settings

AuthMethod: Specifies how the client credentials are sent to the token server.

This configuration setting specifies how the ClientId and ClientSecret are provided when making a request to the token server. By default (0) the ClientId and ClientSecret are provided to the token server through the client_id and client_secret form parameters. If set to 1, then the component will provide the ClientId and ClientSecret through the basic Authorization HTTP header.

AuthorizationTokenType: The type of access token returned.

Applicable values for this configuration setting include the following:


Bearer (default)	When the access token returned by the server is a Bearer type, the authorization string returned by GetAuthorization will be in the format "Bearer access_token". This can be supplied as the value of the HTTP authorization header.

BrowserResponseTimeout: Specifies the amount of time to wait for a response from the browser.

This configuration setting specifies the amount of time (in seconds) the component will wait for a response from the browser in the LaunchBrowser event. The default value is 0, meaning that the component will wait indefinitely.

DeviceGrantType: The grant type to be used when the ClientProfile is set to ocpDevice.

This configuration setting is used to specify a different grant type to use for device flow. By default this is set to "http://oauth.net/grant_type/device/1.0". Another commonly used grant type is "urn:ietf:params:oauth:grant-type:device_code".

DeviceUserCode: The device's user code when the ClientProfile is set to ocpDevice.

When ClientProfile is set to ocpDevice and GetAuthorizationURL is called, the class will request a device user code from the server specified by ServerAuthURL. This configuration setting will be populated with the device user code returned by the server. Provide this value along with the URL returned by GetAuthorizationURL to the user.

FormVarCount: Specifies the number of additional form variables to include in the request.

This configuration setting may be used to specify additional form variables made in the request to exchange AuthorizationCode for an access token. This is useful in cases in which the OAuth server requires additional fields. This is used in conjunction with FormVarName[i] and FormVarValue[i]. For instance: component.Config("FormVarCount=2"); component.Config("FormVarName[0]=myvar"); component.Config("FormVarValue[0]=myvalue"); component.Config("FormVarName[1]=testname"); component.Config("FormVarValue[1]=testvalue"); The value will be URL encoded by the class

FormVarName[i]: Specifies the form variable name at the specified index.

This configuration setting specifies the form variable name at the index specified. See FormVarCount for details.

FormVarValue[i]: Specifies the form variable value at the specified index.

This configuration setting specifies the form variable value at the index specified. See FormVarCount for details.

IncludeClientCredsInBody: Whether to include the client credentials in the header or request body.

This configuration setting specifies whether the ClientId and ClientSecret properties are included in the authorization header or the request body when a request is made by GetAuthorization. This only applies to request when the GrantType property is set to ogtClientCredentials. If set to False (default), the credentials are provided through the authorization header. If set to True, the credentials are added as form entries to the request body.

IncludeEmptyRedirectURI: Whether an empty redirect_uri parameter is included in requests.

This configuration setting specifies whether redirect_uri is included in the request made by GetAuthorization if it is empty. In most cases, redirect_uri will contain a value and will be sent; if, however, ClientProfile is set to Mobile or Device, this will be empty.

If set to True (default), the redirect_uri will be sent in all cases. If set to False, the redirect_uri will be sent only if it has a value.

JWTAudience: The JWT audience when the ClientProfile is set to ocpJWT.

This configuration setting specifies the audience that the JWT is intended for. This is required when ClientProfile is set to ocpJWT. When using Google service accounts, this value must be "https://www.googleapis.com/oauth2/v3/token".

JWTCertStore: The name of the certificate store for the JWT signing certificate.

The is the name of the certificate store for the JWT signing certificate.

The JWTCertStoreType field specifies the type of certificate store specified by JWTCertStore. If the store is password protected, specify the password in JWTCertStorePassword.

JWTCertStore is used in conjunction with the JWTCertSubject field to specify the JWT signing certificate.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

Note: This is required when ClientProfile is set to ocpJWT.

JWTCertStorePassword: The JWT signing certificate password.

If the certificate store is of a type that requires a password, this property is used to specify that password to open the certificate store.

Note: This is applicable only when ClientProfile is set to ocpJWT.

JWTCertStoreType: The type of certificate store.

This configuration specifies the type of certificate store. Possible values are as follows:


0	User - This is the default for Windows. This specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1	Machine - For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2	PFXFile - The certificate store is the name of a PFX (PKCS12) file containing certificates.
3	PFXBlob - The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS12) format.
4	JKSFile - The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is available only in Java.
5	JKSBlob - The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: This store type is available only in Java.
6	PEMKeyFile - The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7	PEMKeyBlob - The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
14	PPKFile - The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15	PPKBlob - The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16	XMLFile - The certificate store is the name of a file that contains a certificate in XML format.
17	XMLBlob - The certificate store is a string that contains a certificate in XML format.

Note: This is required when ClientProfile is set to ocpJWT.

JWTCertSubject: The JWT signing certificate subject.

The is the subject of the JWT signing certificate.

The special value "*" picks a random certificate in the certificate store.


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

Note: This is required when ClientProfile is set to ocpJWT.

JWTIssuer: The JWT issuer when the ClientProfile is set to ocpJWT.

This configuration setting specifies the issuer of the JWT (JSON Web Token). This is required when ClientProfile is set to ocpJWT. When using Google service accounts, this value is the email address of the service account.

JWTJSONKey: The data or file path of the JWT JSON Key.

This configuration setting specifies the file path of the JWT JSON Key, or a string containing its content, provided for the service account. If this setting is specified, the class will attempt to parse the values for ClientId, JWTAudience, JWTCertStore, JWTIssuer, ServerAuthURL, and ServerTokenURL from the JSON data. It will also initialize the values for JWTCertStoreType, JWTCertStorePassword, and JWTCertSubject.

JWTPayload: The payload of the JWT access token, if present.

This configuration setting provides the payload section of a JWT access token if the access token is a JWT and the class is able to parse out the payload section. This setting only applies to access tokens that are returned from a service provider after successfully authorizing and authenticating with the service. This setting is not used when setting up the class for authentication when the ClientProfile is set to ocpJWT.

To parse the payload for specific claims, see JWTXPath.

JWTServiceProvider: The service provider to which authentication is being performed.

This configuration setting specifies the service provider that is being authenticated to. Possible values are as follows:

0 (Google - Default)
1 (Microsoft)

Note: This is required when ClientProfile is set to ocpJWT.

JWTSignatureAlgorithm: The signature algorithm used to sign the JWT.

This configuration setting specifies the signature algorithm used to sign the JWT. Possible values are as follows:

RSA-SHA256

Note: This is applicable only when ClientProfile is set to ocpJWT.

JWTSubject: The subject field in the JWT.

This configuration setting optionally specifies the subject field in the JWT. For Google service accounts, this is the email address of the user for which the application is requesting delegated access. The meaning of this value varies from service to service. Please consult the documentation for the service to which you are authenticating to determine if the "sub" field is applicable.

JWTValidityTime: The amount of time in seconds for which the assertion in the JWT is valid.

The is the amount of time in seconds for which the assertion in the JWT is valid. The default value is 3600 (one hour).

Note: This is applicable only when ClientProfile is set to ocpJWT.

JWTXChildCount: The number of child elements of the current element.

The number of child attributes of the current element. The XChild configuration settings will be indexed from 0 to (JWTXChildCount - 1).

The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.

JWTXChildName[i]: The name of the child element.

Provides the name of the i'th child element of the current element.

The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.

JWTXChildXText[i]: The inner text of the child element.

Provides the inner text of the i'th child element of the current element.

The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.

JWTXElement: The name of the current element.

Provides the name of the current element.

The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.

JWTXParent: The parent of the current element.

Provides the parent of the current element.

The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.

JWTXPath: Points to a specific element in the returned payload of a JWT based access token.

The JWTXPath setting allows you to point to specific claims within the payload of a JWT based access token.

XPath syntax is available for the payload of JWT based access tokens if available. An XPath is a series of one or more element accessors separated by the / character, for example: /A/B/C/D.

The following are possible values for an element accessor, which operates relative to the current location specified by the XPath accessors which proceed it in the overall XPath string:


Accessor	Description
`name`	The first element with a particular name. Can be `*`.
`[i]`	The i-th element.
`name[i]`	The i-th element with a particular name.
`[last()]`	The last element.
`[last()-i]`	The element i before the last element.

Here are some examples of valid XPaths and some common claims:


Description	JSON XPath
Document root	`/json`
Specific element	`/json/element_one`
Username Claim (Microsoft Specific)	`/json/preferred_username`
Registered Application Name Claim (Microsoft Specific)	`/json/app_displayname`

This is not an exhaustive list by any means, but should provide a general idea of the possibilities. To get the text of the specified element, see JWTXText.

JWTXSubTree: A snapshot of the current element in the document.

Provides the entirety of the current element (including its sub-elements).

The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.

JWTXText: The text of the current element.

Provides the inner text of the current element.

The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.

Microsoft365AdminConsentError: The error message returned when the admin denies consent to the scopes.

When using the Microsoft365AdminConsent profile, this configuration setting will hold the error message in the event that the admin does not consent to the scope of the application. This configuration setting is read-only.

Microsoft365AdminConsentErrorDesc: The error description returned when the admin denies consent to the scopes.

When using the Microsoft365AdminConsent profile, this configuration setting will hold the description of the error message in the event that the admin does not consent to the scope of the application. This configuration setting is read-only.

Microsoft365AdminConsentTenant: The tenant ID returned after the admin consents to the scopes.

When using the Microsoft365AdminConsent profile, this configuration setting will hold the tenant Id that is returned after the admin consents to the scopes. This configuration setting is read-only.

Office365ServiceAPIVersion: The API version of the Office 365 service being discovered.

This configuration setting specifies the API version of the Office 365 service for which a search is initiated. See Office365ServiceEndpoint for details.

Office365ServiceCapability: The API capability of the Office 365 service being discovered.

This configuration setting specifies the capability of the Office 365 service for which a search is initiated. See Office365ServiceEndpoint for details.

Office365ServiceEndpoint: The Office 365 endpoint for the service that matches the criteria specified.

When obtaining authorization to access an Office 365 resource, it may be necessary to discover a list of services that match a certain criteria and then select a specific resource from that list. For instance, OneDrive for Business requires discovery of the Office 365 service that can be used with the OneDrive API.

When GetAuthorization is called, if Office365ServiceAPIVersion and Office365ServiceCapability are specified, the class will attempt to discover the Office 365 services for which the user has access and find a service that matches the requirements specified in Office365ServiceAPIVersion and Office365ServiceCapability. If a service is found, the class will then obtain authorization to access that service. If authorization is successful, Office365ServiceEndpoint will hold the service endpoint URL to which requests should be made.

Example. OneDrive for Business: oauth.Config("Office365ServiceCapability=MyFiles"); oauth.Config("Office365ServiceAPIVersion=v2.0"); string authString = oauth.GetAuthorization(); string endpointURL = oauth.Config("Office365ServiceEndpoint");

PasswordGrantUsername: The Username field when using the password grant type.

This configuration setting is used to set the username field when the GrantType is set to the password grant type and GetAuthorization is called.

PKCEChallengeEncoding: The PKCE code challenge method to use.

This configuration setting controls the PKCE code challenge method used when UsePKCE is set to True. This value controls the PKCE code challenge method. Possible values are as follows:

1 (Plain)
2 (S256/SHA256 - default)

PKCEVerifier: The PKCE verifier used to generate the challenge.

This configuration setting when queried provides the PKCE verifier that is used to generate the PKCE challenge for the GetAuthorization and GetAuthorizationURL methods when UsePKCE is set to true. When using the ocpWeb ClientProfile, the configuration setting can be set instead to allow the authorization request to be made from a different instance than the authentication (token) request.

PollingInterval: The interval in seconds between polling requests when the device client profile is used.

When ClientProfile is set to ocpDevice, this configuration setting determines the interval (in seconds) between polling requests made to ServerTokenURL. The default value is 5.

ResponseCompanyImage: A URL or full path to a company logo.

This configuration setting specifies a URL or full path to a company logo. If set, the image will be displayed and will be a hyperlink to ResponseCompanyURL.

ResponseCompanyURL: A URL to the company website or similar resource.

This configuration setting specifies a URL to the company website or similar resource. This is used in conjunction with ResponseCompanyImage.

ResponseFailureHeading: Short header text indicating failure.

This configuration setting specifies short header text indicating failure. The default value is Authorization Failed.

ResponseFailureMessage: A description for a failed authorization.

This configuration setting specifies a description for a failed authorization. The default value is Access to your account could not be authorized. Please check your user and connection details and try again.

ResponseHelpURL: A URL to a help page or other resource.

This configuration setting specifies a URL to a help page or other resource. If set, a Help link will be displayed and point to this URL.

ResponseLicenseURL: A URL to licensing terms.

This configuration setting specifies a URL to licensing terms. If set, a License link will be displayed and point to this URL.

ResponseProductImage: A URL or full path to a product image.

This configuration setting specifies a URL or full path to a product image. If set, the image will be displayed and will be a hyperlink to ResponseProductURL.

ResponseProductURL: A URL to a product page or similar resource.

This configuration setting specifies a URL to a product page or similar resource. This is used in conjunction with ResponseProductImage.

ResponseSuccessHeading: Short header text indicating success.

This configuration setting specifies a short header text indicating success. The default value is Authorization Successful.

ResponseSuccessMessage: A description for a successful authorization.

This configuration setting specifies a description for a successful authorization. The default value is Access to your account was successfully authorized. You may now close this window.

ReUseWebServer: Determines if the same server instance is used between requests.

If this is set to True (default), the same embedded web server instance will be used for multiple requests. If set to False, the embedded web server will be created and destroyed on each call to GetAuthorization.

TokenInfoFieldCount: The number of fields in the tokeninfo service response.

This configuration setting returns the number of fields present in the tokeninfo service response. This is populated after calling ValidateToken.

TokenInfoFieldName[i]: The name of the tokeninfo service response field.

This configuration setting returns the name of the tokeninfo service response field specified by index i. Valid values are from 0 to TokenInfoFieldCount -1.

TokenInfoFieldValue[i]: The value of the tokeninfo service response field.

This configuration setting returns the value of the tokeninfo service response field specified by index i. Valid values are from 0 to TokenInfoFieldCount -1.

TokenInfoURL: The URL of the tokeninfo service.

This configuration setting specifies the URL of the tokeninfo service to which a request is made when ValidateToken is called. The default value is "https://www.googleapis.com/oauth2/v1/tokeninfo".

ValidateToken: Validates the specified access token with a tokeninfo service.

This configuration setting will post the AccessToken to the tokeninfo service specified by TokenInfoURL. This allows a token to be queried for validity and other information before use. When this configuration setting is queried, the class will immediately make a request to the server. TokenInfoFieldCount, TokenInfoFieldName[i], and TokenInfoFieldValue[i]] may be used to iterate over the fields in the response.

WebServerFailedResponse: The custom response that will be displayed to the user if authentication failed.

When GetAuthorization is called, the user will be redirected to the embedded web server upon completing authentication with the authorization server. If authentication fails, the HTML specified here will be sent to the user's browser.

WebServerHost: The hostname used by the embedded web server displayed in the ReturnURL.

This configuration setting specifies the hostname used by the embedded web server when ClientProfile is set to ocpApplication. This specifies the interface on which the embedded web server listens and also the value displayed in the ReturnURL. This should be set to the hostname only, and not to the full URL.

The default value is "localhost".

WebServerResponse: The custom response that is displayed to the user.

When GetAuthorization is called, the user will be redirected to the embedded web server upon completing authentication with the authorization server. This setting allows you to specify the HTML that will be sent to the user's browser.

HTTP Config Settings

AcceptEncoding: Used to tell the server which types of content encodings the client supports.

When AllowHTTPCompression is True, the class adds an Accept-Encoding header to the request being sent to the server. By default, this header's value is "gzip, deflate". This configuration setting allows you to change the value of the Accept-Encoding header. Note: The class only supports gzip and deflate decompression algorithms.

AllowHTTPCompression: This property enables HTTP compression for receiving data.

This configuration setting enables HTTP compression for receiving data. When set to True (default), the class will accept compressed data. It then will uncompress the data it has received. The class will handle data compressed by both gzip and deflate compression algorithms.

When True, the class adds an Accept-Encoding header to the outgoing request. The value for this header can be controlled by the AcceptEncoding configuration setting. The default value for this header is "gzip, deflate".

The default value is True.

AllowHTTPFallback: Whether HTTP/2 connections are permitted to fallback to HTTP/1.1.

This configuration setting controls whether HTTP/2 connections are permitted to fall back to HTTP/1.1 when the server does not support HTTP/2. This setting is applicable only when HTTPVersion is set to "2.0".

If set to True (default), the class will automatically use HTTP/1.1 if the server does not support HTTP/2. If set to False, the class if the server does not support HTTP/2.

The default value is True.

Append: Whether to append data to LocalFile.

This configuration setting determines whether data will be appended when writing to LocalFile. When set to True, downloaded data will be appended to LocalFile. This may be used in conjunction with Range to resume a failed download. This is applicable only when LocalFile is set. The default value is False.

Authorization: The Authorization string to be sent to the server.

If the Authorization property contains a nonempty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

This property is provided so that the HTTP class can be extended with other security schemes in addition to the authorization schemes already implemented by the class.

The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

BytesTransferred: Contains the number of bytes transferred in the response data.

This configuration setting returns the raw number of bytes from the HTTP response data, before the component processes the data, whether it is chunked or compressed. This returns the same value as the Transfer event, by BytesTransferred.

ChunkSize: Specifies the chunk size in bytes when using chunked encoding.

This is applicable only when UseChunkedEncoding is True. This setting specifies the chunk size in bytes to be used when posting data. The default value is 16384.

CompressHTTPRequest: Set to true to compress the body of a PUT or POST request.

If set to True, the body of a PUT or POST request will be compressed into gzip format before sending the request. The "Content-Encoding" header is also added to the outgoing request.

The default value is False.

EncodeURL: If set to True the URL will be encoded by the class.

If set to True, the URL passed to the class will be URL encoded. The default value is False.

FollowRedirects: Determines what happens when the server issues a redirect.

This option determines what happens when the server issues a redirect. Normally, the class returns an error if the server responds with an "Object Moved" message. If this property is set to 1 (always), the new URL for the object is retrieved automatically every time.

If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same; otherwise, the class .

Note: Following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.

The default value is 0 (Never). In this case, redirects are never followed, and the class instead.

Following are the valid options:

0 - Never
1 - Always
2 - Same Scheme

GetOn302Redirect: If set to True the class will perform a GET on the new location.

The default value is False. If set to True, the class will perform a GET on the new location. Otherwise, it will use the same HTTP method again.

HTTP2HeadersWithoutIndexing: HTTP2 headers that should not update the dynamic header table with incremental indexing.

HTTP/2 servers maintain a dynamic table of headers and values seen over the course of a connection. Typically, these headers are inserted into the table through incremental indexing (also known as HPACK, defined in RFC 7541). To tell the component not to use incremental indexing for certain headers, and thus not update the dynamic table, set this configuration option to a comma-delimited list of the header names.

HTTPVersion: The version of HTTP used by the class.

This property specifies the HTTP version used by the class. Possible values are as follows:

"1.0"
"1.1" (default)
"2.0"
"3.0"

When using HTTP/2 ("2.0"), additional restrictions apply. Please see the following notes for details.

HTTP/2 Notes

When using HTTP/2, a secure Secure Sockets Layer/Transport Layer Security (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/2 will result in an error.

If the server does not support HTTP/2, the class will automatically use HTTP/1.1 instead. This is done to provide compatibility without the need for any additional settings. To see which version was used, check NegotiatedHTTPVersion after calling a method. The AllowHTTPFallback setting controls whether this behavior is allowed (default) or disallowed.

HTTP/3 Notes

HTTP/3 is supported only in .NET and Java.

When using HTTP/3, a secure (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/3 will result in an error.

IfModifiedSince: A date determining the maximum age of the desired document.

If this setting contains a nonempty string, an If-Modified-Since HTTP header is added to the request. The value of this header is used to make the HTTP request conditional: if the requested documented has not been modified since the time specified in the field, a copy of the document will not be returned from the server; instead, a 304 (not modified) response will be returned by the server and the component throws an exception

The format of the date value for IfModifiedSince is detailed in the HTTP specs. For example: Sat, 29 Oct 2017 19:43:31 GMT.

KeepAlive: Determines whether the HTTP connection is closed after completion of the request.

If true, the component will not send the Connection: Close header. The absence of the Connection header indicates to the server that HTTP persistent connections should be used if supported. Note: Not all servers support persistent connections. If false, the connection will be closed immediately after the server response is received.

The default value for KeepAlive is false.

KerberosSPN: The Service Principal Name for the Kerberos Domain Controller.

If the Service Principal Name on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, the Service Principal Name should be set here.

LogLevel: The level of detail that is logged.

This configuration setting controls the level of detail that is logged through the Log event. Possible values are as follows:


0 (None)	No events are logged.
1 (Info - default)	Informational events are logged.
2 (Verbose)	Detailed data are logged.
3 (Debug)	Debug data are logged.

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

MaxRedirectAttempts: Limits the number of redirects that are followed in a request.

When FollowRedirects is set to any value other than frNever, the class will follow redirects until this maximum number of redirect attempts are made. The default value is 20.

NegotiatedHTTPVersion: The negotiated HTTP version.

This configuration setting may be queried after the request is complete to indicate the HTTP version used. When HTTPVersion is set to "2.0" (if the server does not support "2.0"), then the class will fall back to using "1.1" automatically. This setting will indicate which version was used.

OtherHeaders: Other headers as determined by the user (optional).

This configuration setting can be set to a string of headers to be appended to the HTTP request headers.

The headers must follow the format "header: value" as described in the HTTP specifications. Header lines should be separated by .

Use this configuration setting with caution. If this configuration setting contains invalid headers, HTTP requests may fail.

This configuration setting is useful for extending the functionality of the class beyond what is provided.

ProxyAuthorization: The authorization string to be sent to the proxy server.

This is similar to the Authorization configuration setting, but is used for proxy authorization. If this configuration setting contains a nonempty string, a Proxy-Authorization HTTP request header is added to the request. This header conveys proxy Authorization information to the server. If ProxyUser and ProxyPassword are specified, this value is calculated using the algorithm specified by ProxyAuthScheme.

ProxyAuthScheme: The authorization scheme to be used for the proxy.

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

ProxyPassword: A password if authentication is to be used for the proxy.

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

ProxyPort: Port for the proxy server (default 80).

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

ProxyServer: Name or IP address of a proxy server (optional).

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

ProxyUser: A user name if authentication is to be used for the proxy.

This configuration setting is provided for use by classs that do not directly expose Proxy properties.

SentHeaders: The full set of headers as sent by the client.

This configuration setting returns the complete set of raw headers as sent by the client.

StatusCode: The status code of the last response from the server.

This configuration setting contains the result code of the last response from the server.

StatusLine: The first line of the last response from the server.

This setting contains the first line of the last response from the server. The format of the line will be [HTTP version] [Result Code] [Description].

TransferredData: The contents of the last response from the server.

This configuration setting contains the contents of the last response from the server.

TransferredDataLimit: The maximum number of incoming bytes to be stored by the class.

If TransferredDataLimit is set to 0 (default), no limits are imposed. Otherwise, this reflects the maximum number of incoming bytes that can be stored by the class.

TransferredHeaders: The full set of headers as received from the server.

This configuration setting returns the complete set of raw headers as received from the server.

TransferredRequest: The full request as sent by the client.

This configuration setting returns the full request as sent by the client. For performance reasons, the request is not normally saved. Set this configuration setting to ON before making a request to enable it. Following are examples of this request:

.NET Http http = new Http(); http.Config("TransferredRequest=on"); http.PostData = "body"; http.Post("http://someserver.com"); Console.WriteLine(http.Config("TransferredRequest")); C++ HTTP http; http.Config("TransferredRequest=on"); http.SetPostData("body", 5); http.Post("http://someserver.com"); printf("%s\r\n", http.Config("TransferredRequest"));

UseChunkedEncoding: Enables or Disables HTTP chunked encoding for transfers.

If UseChunkedEncoding is set to True, the class will use HTTP-chunked encoding when posting, if possible. HTTP-chunked encoding allows large files to be sent in chunks instead of all at once. If set to False, the class will not use HTTP-chunked encoding. The default value is False.

Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding.

UseIDNs: Whether to encode hostnames to internationalized domain names.

This configuration setting specifies whether hostnames containing non-ASCII characters are encoded to internationalized domain names. When set to True, if a hostname contains non-ASCII characters, it is encoded using Punycode to an IDN (internationalized domain name).

The default value is False and the hostname will always be used exactly as specified. Note: The CodePage setting must be set to a value capable of interpreting the specified host name. For instance, to specify UTF-8, set CodePage to 65001.

UseProxyAutoConfigURL: Whether to use a Proxy auto-config file when attempting a connection.

This configuration specifies whether the class will attempt to use the Proxy auto-config URL when establishing a connection and ProxyAutoDetect is set to True.

When True (default), the class will check for the existence of a Proxy auto-config URL, and if found, will determine the appropriate proxy to use.

UserAgent: Information about the user agent (browser).

This is the value supplied in the HTTP User-Agent header. The default setting is "IPWorks HTTP Component - www.nsoftware.com".

Override the default with the name and version of your software.

TCPClient Config Settings

ConnectionTimeout: Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the class will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect: Tells the class whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallHost: Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallPassword: Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the class .

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallPort: The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallType: Determines the type of firewall to connect through.

Possible values are as follows:


0	No firewall (default setting).
1	Connect through a tunneling proxy. FirewallPort is set to 80.
2	Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3	Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10	Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallUser: A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the class .

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

KeepAliveInterval: The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime: The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger: When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime: Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost: The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface), setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

LocalPort: The port in the local host where the class binds.

This configuration setting must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This configuration setting is useful when trying to connect to services that require a trusted port on the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength: The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate: The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList: A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive: Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay: Whether or not to delay when sending packets.

When set to True, the socket will send all data that are ready to send at once. When set to False, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this configuration setting is set to False.

UseIPv6: Whether to use IPv6.

When set to 0 (default), the class will use IPv4 exclusively. When set to 1, the class will use IPv6 exclusively. To instruct the class to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are as follows:


0	IPv4 only
1	IPv6 only
2	IPv6 with IPv4 fallback

SSL Config Settings

LogSSLPackets: Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this configuration setting controls whether Secure Sockets Layer (SSL) packets should be logged. By default, this configuration setting is False, as it is useful only for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this configuration setting has no effect if SSLProvider is set to Platform.

OpenSSLCADir: The path to a directory containing CA certificates.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g., 9d66eef0.0, 9d66eef0.1). OpenSSL recommends the use of the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCAFile: Name of the file containing the list of CA's trusted by your application.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by the following sequences:

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

Before, between, and after the certificate text is allowed, which can be used, for example, for descriptions of the certificates. Refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCipherList: A string that controls the ciphers to be used by SSL.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

OpenSSLPrngSeedData: The data to seed the pseudo random number generator (PRNG).

This functionality is available only when the provider is OpenSSL.

By default, OpenSSL uses the device file "/dev/urandom" to seed the PRNG, and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

ReuseSSLSession: Determines if the SSL session is reused.

If set to True, the class will reuse the context if and only if the following criteria are met:

The target host name is the same.
The system cache entry has not expired (default timeout is 10 hours).
The application process that calls the function is the same.
The logon session is the same.
The instance of the class is the same.

SSLAcceptAnyServerCert: Whether to trust any certificate presented by the server.

This configuration setting disables all certificate verification when set to True. This configuration setting must be enabled to trust a self-signed certificate. It is not recommended to enable this configuration setting in a production environment. The default value is False.

SSLCACerts: A newline separated list of CA certificates to be included when performing an SSL handshake.

When SSLProvider is set to Internal, this configuration setting specifies one or more CA certificates to be included with the SSLCert property. Some servers or clients require the entire chain, including CA certificates, to be presented when performing SSL authentication. The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCipherStrength: The minimum cipher strength used for bulk encryption.

This minimum cipher strength is largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Note: This configuration setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this configuration setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList configuration setting.

SSLClientCACerts: A newline separated list of CA certificates to use during SSL client certificate validation.

This configuration setting is only applicable to server components (e.g., TCPServer) see SSLServerCACerts for client components (e.g., TCPClient). This setting can be used to optionally specify one or more CA certificates to be used when verifying the client certificate that is presented by the client during the SSL handshake when SSLAuthenticateClients is enabled. When verifying the client's certificate, the certificates trusted by the system will be used as part of the verification process. If the client's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the client's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLEnabledCipherSuites: The cipher suite to be used in an SSL negotiation.

This configuration setting enables the cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform include the following: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include the following:

CALG_3DES
CALG_3DES_112
CALG_AES
CALG_AES_128
CALG_AES_192
CALG_AES_256
CALG_AGREEDKEY_ANY
CALG_CYLINK_MEK
CALG_DES
CALG_DESX
CALG_DH_EPHEM
CALG_DH_SF
CALG_DSS_SIGN
CALG_ECDH
CALG_ECDH_EPHEM
CALG_ECDSA
CALG_ECMQV
CALG_HASH_REPLACE_OWF
CALG_HUGHES_MD5
CALG_HMAC
CALG_KEA_KEYX
CALG_MAC
CALG_MD2
CALG_MD4
CALG_MD5
CALG_NO_SIGN
CALG_OID_INFO_CNG_ONLY
CALG_OID_INFO_PARAMETERS
CALG_PCT1_MASTER
CALG_RC2
CALG_RC4
CALG_RC5
CALG_RSA_KEYX
CALG_RSA_SIGN
CALG_SCHANNEL_ENC_KEY
CALG_SCHANNEL_MAC_KEY
CALG_SCHANNEL_MASTER_HASH
CALG_SEAL
CALG_SHA
CALG_SHA1
CALG_SHA_256
CALG_SHA_384
CALG_SHA_512
CALG_SKIPJACK
CALG_SSL2_MASTER
CALG_SSL3_MASTER
CALG_SSL3_SHAMD5
CALG_TEK
CALG_TLS1_MASTER
CALG_TLS1PRF

Example values when SSLProvider is set to Internalinclude the following:

obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_ECDH_RSA_WITH_AES_128_CBC_SHA");

Possible values when SSLProvider is set to Internal include the following:

TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_128_GCM_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
TLS_DHE_DSS_WITH_AES_256_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_DES_CBC_SHA
TLS_DHE_RSA_WITH_DES_CBC_SHA
TLS_DHE_DSS_WITH_DES_CBC_SHA
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols), only the following cipher suites are supported:

TLS_AES_256_GCM_SHA384
TLS_CHACHA20_POLY1305_SHA256
TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols: Used to enable/disable the supported security protocols.

This configuration setting is used to enable or disable the supported security protocols.

Not all supported protocols are enabled by default. The default value is 4032 for client components, and 3072 for server components. To specify a combination of enabled protocol versions set this config to the binary OR of one or more of the following values:


TLS1.3	12288 (Hex 3000)
TLS1.2	3072 (Hex C00) (Default - Client and Server)
TLS1.1	768 (Hex 300) (Default - Client)
TLS1	192 (Hex C0) (Default - Client)
SSL3	48 (Hex 30)
SSL2	12 (Hex 0C)

Note that only TLS 1.2 is enabled for server components that accept incoming connections. This adheres to industry standards to ensure a secure connection. Client components enable TLS 1.0, TLS 1.1, and TLS 1.2 by default and will negotiate the highest mutually supported version when connecting to a server, which should be TLS 1.2 in most cases.

SSLEnabledProtocols: Transport Layer Security (TLS) 1.3 Notes:

In the JavaScript edition, the platform implementation is used when TLS 1.3 is enabled and SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the class when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

SSLEnableRenegotiation: Whether the renegotiation_info SSL extension is supported.

This configuration setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This configuration setting is false by default, but it can be set to true to enable the extension.

This configuration setting is applicable only when SSLProvider is set to Internal.

SSLIncludeCertChain: Whether the entire certificate chain is included in the SSLServerAuthentication event.

This configuration setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True, all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

SSLKeyLogFile: The location of a file where per-session secrets are written for debugging purposes.

This configuration setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools, such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffic for debugging purposes. When writing to this file, the class will only append, it will not overwrite previous values.

Note: This configuration setting is applicable only when SSLProvider is set to Internal.

SSLNegotiatedCipher: Returns the negotiated cipher suite.

This configuration setting returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength: Returns the negotiated cipher suite strength.

This configuration setting returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite: Returns the negotiated cipher suite.

This configuration setting returns the cipher suite negotiated during the SSL handshake represented as a single string.

SSLNegotiatedKeyExchange: Returns the negotiated key exchange algorithm.

This configuration setting returns the key exchange algorithm negotiated during the SSL handshake.

SSLNegotiatedKeyExchangeStrength: Returns the negotiated key exchange algorithm strength.

This configuration setting returns the strength of the key exchange algorithm negotiated during the SSL handshake.

SSLNegotiatedVersion: Returns the negotiated protocol version.

This configuration setting returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLSecurityFlags: Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be ORed together to exclude multiple conditions:


0x00000001	Ignore time validity status of certificate.
0x00000002	Ignore time validity status of CTL.
0x00000004	Ignore non-nested certificate times.
0x00000010	Allow unknown certificate authority.
0x00000020	Ignore wrong certificate usage.
0x00000100	Ignore unknown certificate revocation status.
0x00000200	Ignore unknown CTL signer revocation status.
0x00000400	Ignore unknown certificate authority revocation status.
0x00000800	Ignore unknown root revocation status.
0x00008000	Allow test root certificate.
0x00004000	Trust test root certificate.
0x80000000	Ignore non-matching CN (certificate CN non-matching server name).

This functionality is currently not available when the provider is OpenSSL.

SSLServerCACerts: A newline separated list of CA certificates to use during SSL server certificate validation.

This configuration setting is only used by client components (e.g., TCPClient) see SSLClientCACerts for server components (e.g., TCPServer). This configuration setting can be used to optionally specify one or more CA certificates to be used when connecting to the server and verifying the server certificate. When verifying the server's certificate, the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

TLS12SignatureAlgorithms: Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This configuration setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the class will verify that the server certificate signature algorithm is among the values specified in this configuration setting. If the server certificate signature algorithm is unsupported, the class .

The format of this value is a comma-separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this configuration setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

To not restrict the server's certificate signature algorithm, specify an empty string as the value for this configuration setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups: The supported groups for ECC.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)

TLS13KeyShareGroups: The groups for which to pregenerate key shares.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional roundtrip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result, only some groups are included by default in this configuration setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used that is not present in this list, it will incur an additional roundtrip and time to generate the key share for that group.

In most cases, this configuration setting does not need to be modified. This should be modified only if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448"
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1"
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096"
"ffdhe_6144"
"ffdhe_8192"

TLS13SignatureAlgorithms: The allowed certificate signature algorithms.

This configuration setting holds a comma-separated list of allowed signature algorithms. Possible values include the following:

"ed25519" (default)
"ed448" (default)
"ecdsa_secp256r1_sha256" (default)
"ecdsa_secp384r1_sha384" (default)
"ecdsa_secp521r1_sha512" (default)
"rsa_pkcs1_sha256" (default)
"rsa_pkcs1_sha384" (default)
"rsa_pkcs1_sha512" (default)
"rsa_pss_sha256" (default)
"rsa_pss_sha384" (default)
"rsa_pss_sha512" (default)

The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This configuration setting is applicable only when SSLEnabledProtocols includes TLS 1.3.

TLS13SupportedGroups: The supported groups for (EC)DHE key exchange.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.3 for key exchange. This configuration setting should be modified only if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448" (default)
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096" (default)
"ffdhe_6144" (default)
"ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout: Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method that does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for User Datagram Protocol (UDP) ports.

FirewallData: Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g., headers for custom authentication schemes).

InBufferSize: The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the Transmission Control Protocol (TCP)/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. In some cases, increasing the value of the InBufferSize setting can provide significant improvements in performance.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize: The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. In some cases, increasing the value of the OutBufferSize setting can provide significant improvements in performance.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo: Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage: The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:


Identifier	Name
037	IBM EBCDIC - U.S./Canada
437	OEM - United States
500	IBM EBCDIC - International
708	Arabic - ASMO 708
709	Arabic - ASMO 449+, BCON V4
710	Arabic - Transparent Arabic
720	Arabic - Transparent ASMO
737	OEM - Greek (formerly 437G)
775	OEM - Baltic
850	OEM - Multilingual Latin I
852	OEM - Latin II
855	OEM - Cyrillic (primarily Russian)
857	OEM - Turkish
858	OEM - Multilingual Latin I + Euro symbol
860	OEM - Portuguese
861	OEM - Icelandic
862	OEM - Hebrew
863	OEM - Canadian-French
864	OEM - Arabic
865	OEM - Nordic
866	OEM - Russian
869	OEM - Modern Greek
870	IBM EBCDIC - Multilingual/ROECE (Latin-2)
874	ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875	IBM EBCDIC - Modern Greek
932	ANSI/OEM - Japanese, Shift-JIS
936	ANSI/OEM - Simplified Chinese (PRC, Singapore)
949	ANSI/OEM - Korean (Unified Hangul Code)
950	ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026	IBM EBCDIC - Turkish (Latin-5)
1047	IBM EBCDIC - Latin 1/Open System
1140	IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141	IBM EBCDIC - Germany (20273 + Euro symbol)
1142	IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143	IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144	IBM EBCDIC - Italy (20280 + Euro symbol)
1145	IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146	IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147	IBM EBCDIC - France (20297 + Euro symbol)
1148	IBM EBCDIC - International (500 + Euro symbol)
1149	IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200	Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201	Unicode UCS-2 Big-Endian
1250	ANSI - Central European
1251	ANSI - Cyrillic
1252	ANSI - Latin I
1253	ANSI - Greek
1254	ANSI - Turkish
1255	ANSI - Hebrew
1256	ANSI - Arabic
1257	ANSI - Baltic
1258	ANSI/OEM - Vietnamese
1361	Korean (Johab)
10000	MAC - Roman
10001	MAC - Japanese
10002	MAC - Traditional Chinese (Big5)
10003	MAC - Korean
10004	MAC - Arabic
10005	MAC - Hebrew
10006	MAC - Greek I
10007	MAC - Cyrillic
10008	MAC - Simplified Chinese (GB 2312)
10010	MAC - Romania
10017	MAC - Ukraine
10021	MAC - Thai
10029	MAC - Latin II
10079	MAC - Icelandic
10081	MAC - Turkish
10082	MAC - Croatia
12000	Unicode UCS-4 Little-Endian
12001	Unicode UCS-4 Big-Endian
20000	CNS - Taiwan
20001	TCA - Taiwan
20002	Eten - Taiwan
20003	IBM5550 - Taiwan
20004	TeleText - Taiwan
20005	Wang - Taiwan
20105	IA5 IRV International Alphabet No. 5 (7-bit)
20106	IA5 German (7-bit)
20107	IA5 Swedish (7-bit)
20108	IA5 Norwegian (7-bit)
20127	US-ASCII (7-bit)
20261	T.61
20269	ISO 6937 Non-Spacing Accent
20273	IBM EBCDIC - Germany
20277	IBM EBCDIC - Denmark/Norway
20278	IBM EBCDIC - Finland/Sweden
20280	IBM EBCDIC - Italy
20284	IBM EBCDIC - Latin America/Spain
20285	IBM EBCDIC - United Kingdom
20290	IBM EBCDIC - Japanese Katakana Extended
20297	IBM EBCDIC - France
20420	IBM EBCDIC - Arabic
20423	IBM EBCDIC - Greek
20424	IBM EBCDIC - Hebrew
20833	IBM EBCDIC - Korean Extended
20838	IBM EBCDIC - Thai
20866	Russian - KOI8-R
20871	IBM EBCDIC - Icelandic
20880	IBM EBCDIC - Cyrillic (Russian)
20905	IBM EBCDIC - Turkish
20924	IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932	JIS X 0208-1990 & 0121-1990
20936	Simplified Chinese (GB2312)
21025	IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027	Extended Alpha Lowercase
21866	Ukrainian (KOI8-U)
28591	ISO 8859-1 Latin I
28592	ISO 8859-2 Central Europe
28593	ISO 8859-3 Latin 3
28594	ISO 8859-4 Baltic
28595	ISO 8859-5 Cyrillic
28596	ISO 8859-6 Arabic
28597	ISO 8859-7 Greek
28598	ISO 8859-8 Hebrew
28599	ISO 8859-9 Latin 5
28605	ISO 8859-15 Latin 9
29001	Europa 3
38598	ISO 8859-8 Hebrew
50220	ISO 2022 Japanese with no halfwidth Katakana
50221	ISO 2022 Japanese with halfwidth Katakana
50222	ISO 2022 Japanese JIS X 0201-1989
50225	ISO 2022 Korean
50227	ISO 2022 Simplified Chinese
50229	ISO 2022 Traditional Chinese
50930	Japanese (Katakana) Extended
50931	US/Canada and Japanese
50933	Korean Extended and Korean
50935	Simplified Chinese Extended and Simplified Chinese
50936	Simplified Chinese
50937	US/Canada and Traditional Chinese
50939	Japanese (Latin) Extended and Japanese
51932	EUC - Japanese
51936	EUC - Simplified Chinese
51949	EUC - Korean
51950	EUC - Traditional Chinese
52936	HZ-GB2312 Simplified Chinese
54936	Windows XP: GB18030 Simplified Chinese (4 Byte)
57002	ISCII Devanagari
57003	ISCII Bengali
57004	ISCII Tamil
57005	ISCII Telugu
57006	ISCII Assamese
57007	ISCII Oriya
57008	ISCII Kannada
57009	ISCII Malayalam
57010	ISCII Gujarati
57011	ISCII Punjabi
65000	Unicode UTF-7
65001	Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:


Identifier	Name
1	ASCII
2	NEXTSTEP
3	JapaneseEUC
4	UTF8
5	ISOLatin1
6	Symbol
7	NonLossyASCII
8	ShiftJIS
9	ISOLatin2
10	Unicode
11	WindowsCP1251
12	WindowsCP1252
13	WindowsCP1253
14	WindowsCP1254
15	WindowsCP1250
21	ISO2022JP
30	MacOSRoman
10	UTF16String
0x90000100	UTF16BigEndian
0x94000100	UTF16LittleEndian
0x8c000100	UTF32String
0x98000100	UTF32BigEndian
0x9c000100	UTF32LittleEndian
65536	Proprietary

LicenseInfo: Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

Product: The product the license is for.
Product Key: The key the license was generated from.
License Source: Where the license was found (e.g., RuntimeLicense, License File).
License Type: The type of license installed (e.g., Royalty Free, Single Server).
Last Valid Build: The last valid build number for which the license will work.

MaskSensitiveData: Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseInternalSecurityAPI: Whether or not to use the system security libraries or an internal implementation.

When set to false, the class will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to true tells the class to use the internal implementation instead of using the system security libraries.

This setting is set to false by default on all platforms.

Trappable Errors (class cloudmail.oauth)

OAuth Errors

169	Invalid parameter index (out of range).
801	No token specified in Token property.
802	No authorization URL specified.
803	No client Id specified in ClientId property.
804	No client secret specified in ClientSecret property.
805	No request token URL specified.
806	Unknown signature method.
807	Invalid URL.
808	Cryptographic error.
809	No verifier specified.
810	No access token URL specified.
811	Protocol error.
812	Invalid OAuth data.

HTTP Errors

118	Firewall error. The error description contains the detailed message.
143	Busy executing current method.
151	HTTP protocol error. The error message has the server response.
152	No server specified in URL.
153	Specified URLScheme is invalid.
155	Range operation is not supported by server.
156	Invalid cookie index (out of range).
301	Interrupted.
302	Cannot open AttachedFile.

TCPClient Errors

100	You cannot change the RemotePort at this time. A connection is in progress.
101	You cannot change the RemoteHost (Server) at this time. A connection is in progress.
102	The RemoteHost address is invalid (0.0.0.0).
104	Already connected. If you want to reconnect, close the current connection first.
106	You cannot change the LocalPort at this time. A connection is in progress.
107	You cannot change the LocalHost at this time. A connection is in progress.
112	You cannot change MaxLineLength at this time. A connection is in progress.
116	RemotePort cannot be zero. Please specify a valid service port number.
117	You cannot change the UseConnection option while the class is active.
135	Operation would block.
201	Timeout.
211	Action impossible in control's present state.
212	Action impossible while not connected.
213	Action impossible while listening.
301	Timeout.
302	Could not open file.
434	Unable to convert string to selected CodePage.
1105	Already connecting. If you want to reconnect, close the current connection first.
1117	You need to connect first.
1119	You cannot change the LocalHost at this time. A connection is in progress.
1120	Connection dropped by remote host.

SSL Errors

270	Cannot load specified security library.
271	Cannot open certificate store.
272	Cannot find specified certificate.
273	Cannot acquire security credentials.
274	Cannot find certificate chain.
275	Cannot verify certificate chain.
276	Error during handshake.
280	Error verifying certificate.
281	Could not find client certificate.
282	Could not find server certificate.
283	Error encrypting data.
284	Error decrypting data.

TCP/IP Errors

10004	[10004] Interrupted system call.
10009	[10009] Bad file number.
10013	[10013] Access denied.
10014	[10014] Bad address.
10022	[10022] Invalid argument.
10024	[10024] Too many open files.
10035	[10035] Operation would block.
10036	[10036] Operation now in progress.
10037	[10037] Operation already in progress.
10038	[10038] Socket operation on nonsocket.
10039	[10039] Destination address required.
10040	[10040] Message is too long.
10041	[10041] Protocol wrong type for socket.
10042	[10042] Bad protocol option.
10043	[10043] Protocol is not supported.
10044	[10044] Socket type is not supported.
10045	[10045] Operation is not supported on socket.
10046	[10046] Protocol family is not supported.
10047	[10047] Address family is not supported by protocol family.
10048	[10048] Address already in use.
10049	[10049] Cannot assign requested address.
10050	[10050] Network is down.
10051	[10051] Network is unreachable.
10052	[10052] Net dropped connection or reset.
10053	[10053] Software caused connection abort.
10054	[10054] Connection reset by peer.
10055	[10055] No buffer space available.
10056	[10056] Socket is already connected.
10057	[10057] Socket is not connected.
10058	[10058] Cannot send after socket shutdown.
10059	[10059] Too many references, cannot splice.
10060	[10060] Connection timed out.
10061	[10061] Connection refused.
10062	[10062] Too many levels of symbolic links.
10063	[10063] File name is too long.
10064	[10064] Host is down.
10065	[10065] No route to host.
10066	[10066] Directory is not empty
10067	[10067] Too many processes.
10068	[10068] Too many users.
10069	[10069] Disc Quota Exceeded.
10070	[10070] Stale NFS file handle.
10071	[10071] Too many levels of remote in path.
10091	[10091] Network subsystem is unavailable.
10092	[10092] WINSOCK DLL Version out of range.
10093	[10093] Winsock is not loaded yet.
11001	[11001] Host not found.
11002	[11002] Nonauthoritative 'Host not found' (try again or check DNS setup).
11003	[11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP.
11004	[11004] Valid name, no data record (check DNS setup).