GoogleDrive Component

Properties   Methods   Events   Config Settings   Errors  

The GoogleDrive component makes it easy to upload, download, and manage files and folders within Google Drive.

Syntax

TcsGoogleDrive

Remarks

The GoogleDrive component provides an easy-to-use interface for Google Drive. Capabilities include uploading and downloading files, file and folder manipulation and organization, Google Shared Drive support, strong client-side file encryption functionality, and more.

Authentication

This component requires authentication via OAuth 2.0. First, perform OAuth authentication using the OAuth* properties to set the appropriate fields for the chosen OAuthClientProfile and OAuthGrantType.

The component has the following defaults:

Authorization Server URL "https://accounts.google.com/o/oauth2/auth"
Token Server URL "https://accounts.google.com/o/oauth2/token"
Scopes "https://www.googleapis.com/auth/drive"

Below is a brief description of the different OAuthClientProfile and OAuthGrantType values that are supported by this component. For a more in-depth description of what needs to be set, refer to the service documentation.

Application Profile

This profile encompasses the most basic grant types that OAuth supports. When this profile is set, all the requests and response handling is done by the component. Depending on the grant type, this may involve launching a browser so a user can login to authenticate with a authorization server. It may also involve starting an embedded web server to receive a response from a redirect.

To start the authentication and authorization process, the Authorize method should be called. If the authorization and authentication was successful, then the OAuthAccessToken property will be populated. Additionally, if a refresh token was provided the OAuthRefreshToken property will be populated as well. These values of the fields are for informational purposes. The component will also cache these tokens along with when the OAuthAccessToken will be expired. When a method that makes requests to the service provider is called or the Authorize method is called the component will automatically check to see if the access token is expired. If it is, it will then automatically try to get a new OAuthAccessToken. If the Authorize method was not used and user interaction would be required, the component will throw an error which can be caught. When user interaction is needed depends on what grant type is set in the OAuthGrantType property. To force the component to only check the access token when the Authorize method is called, the OAuthAutomaticRefresh configuration setting can be set to false.

A brief description of the supported values for the OAuthGrantType property are below. For more information, see the service documentation.

Authorization Code

When using the Authorization Code grant type, the component will use an authorization code to get an access token. For this OAuthGrantType the component expects a OAuthClientId, OAuthClientSecret, OAuthServerAuthURL, and OAuthServerTokenURL to be set. When the Authorize method is called, the component will start the embedded web server and launch the browser so the user can authorize the application. Once the user authorizes, the service provider will redirect them to the embedded web server and the component will parse the authorization code, setting the OAuthAuthorizationCode property, from the redirect. Immediately, the component will make a request to the token server to exchange the authorization code for an access token. The token server will return an access token and possibly a refresh token. If the OAuthRefreshToken property is set, or a refresh token is cached, then the component will not launch the browser and use the refresh token in its request to the token server instead of an authorization code.

Example: GoogleDrive googledrive = new GoogleDrive(); googledrive.OAuth.ClientProfile = OAuthClientProfiles.cocpApplication; googledrive.OAuth.GrantType = OAuthGrantTypes.cogtAuthorizationCode; googledrive.OAuth.ClientId = CLIENT_ID; googledrive.OAuth.ClientSecret = CLIENT_SECRET; googledrive.Authorize();

Implicit

Note: This grant type is considered insecure and should only be used when necessary.

When using the Implicit grant type, the component will request the authorization server to get an access token. For this OAuthGrantType the component expects a OAuthClientId, OAuthClientSecret, and OAuthServerAuthURL to be set. When the Authorize method is called, the component will start the embedded web server and launch the browser so the user can authorize the application. Once the user authorizes, the service provider will redirect them to the embedded web server and the component will parse the access token from the redirect.

A disadvantage of the grant type is that can not use a refresh token to silently get a new access token. Most service providers offer a way to silently get a new access token. See the service documentation for specifics. This means the component will not be able to automatically get a fresh token once it expires.

Web Profile

This profile is similar to setting the component to the Application profile and Authorization Code grant type except the component will not launch the browser. It is typically used in situations where there is a back-end that is supporting some front end. This profile expects that OAuthClientId, OAuthClientSecret, OAuthServerAuthURL, OAuthServerTokenURL, and the OAuthReturnURL properties to be set. Before calling the Authorize method, the OAuthWebAuthURL property should be queried to get a URL. This URL should be used to redirect the user to the authorization page for the service provider. The redirect_uri parameter of this URL is mapped to the OAuthReturnURL property. The OAuthReturnURL property should be set to some web server that will parse the authorization code out of the query parameter from the redirect. Once the authorization code is parsed, it should be passed back to the server where it is then set to the OAuthAuthorizationCode property. Once that is set, the Authorize method can be called to exchange the authorization code for an access token and refresh token if provided. The component will then cache these values like normal and use them to make requests. If the OAuthRefreshToken field is set, or a refresh token is cached, then the Authorize method can immediately be called to make a request to the token server to get a new access token.

External OAuth Support

For complex profiles or grant types, or for more control of the flow, it is possible to perform OAuth authentication using the OAuth component or a separate process. Once complete you should have an authorization string which looks like:
Bearer ACCESS_TOKEN_VALUE

Assign this value to the Authorization property before attempting any operations. Setting the Authorization property will cause the component to ignore the values set in the OAuth property.

For Example: Oauth oauth = new Oauth(); oauth.ClientId = "CLIENT_ID"; oauth.ClientSecret = "CLIENT_SECRET"; oauth.AuthorizationScope = "https://www.googleapis.com/auth/gmail.readonly"; oauth.ServerAuthURL = "https://accounts.google.com/o/oauth2/auth"; oauth.ServerTokenURL = "https://www.googleapis.com/auth/drive"; oauth.GrantType = OauthGrantTypes.ogtAuthorizationCode; googledrive.Authorization = oauth.GetAuthorization(); Consult the documentation for the service for more information about supported scope values and more details on OAuth authentication.

Listing Resources

The ListResources method is used to list resources within the scope specified by the ListResourcesScope property.

The ListChildren, ListParents, and GetResourceInfo methods are also available for finer-grained control. // ResourceList event handler. googledrive.OnResourceList += (s, e) => { Console.WriteLine(e.Name); }; // List all of the current user's resources. googledrive.ListResourcesScope = GoogledriveListResourcesScopes.lrsUser; do { googledrive.ListResources(); for (int i = 0; i < googledrive.Resources.Count; i++) { // Process resources here. } } while (!string.IsNullOrEmpty(googledrive.ResourceMarker)); // List all of the resources in the specified shared drive. googledrive.SharedDrive = "wfsr789vusijfv"; googledrive.ListResourcesScope = GoogledriveListResourcesScopes.lrsSharedDrive; do { googledrive.ListResources(); for (int i = 0; i < googledrive.Resources.Count; i++) { // Process resources here. } } while (!string.IsNullOrEmpty(googledrive.ResourceMarker));

Downloading Files

The DownloadFile method is used to download files.

Download Notes

Downloading an Encrypted File

To decrypt an encrypted file set EncryptionAlgorithm and EncryptionPassword before calling this method. googledrive.LocalFile = "../MyFile.zip"; googledrive.DownloadFile(googledrive.Resources[0].Id, "");

Resuming Downloads

The component also supports resuming failed downloads by using the StartByte property. If a download is interrupted, set StartByte to the appropriate offset before calling this method to resume the download. string downloadFile = "../MyFile.zip"; googledrive.LocalFile = downloadFile; googledrive.DownloadFile(googledrive.Resources[0].Id, ""); //The transfer is interrupted and DownloadFile() above fails. Later, resume the download: //Get the size of the partially downloaded file googledrive.StartByte = new FileInfo(downloadFile).Length; googledrive.DownloadFile(googledrive.Resources[0].Id, "");

Resuming Encrypted File Downloads

Resuming encrypted file downloads is only supported when LocalFile was set in the initial download attempt.

If LocalFile is set when beginning an encrypted download, the component creates a temporary file in TempPath to hold the encrypted data until the download is complete. If the download is interrupted, DownloadTempFile will be populated with the path of the temporary file that holds the partial data.

To resume, DownloadTempFile must be populated, along with StartByte, to allow the remainder of the encrypted data to be downloaded. Once the encrypted data is downloaded it will be decrypted and written to LocalFile. googledrive.LocalFile = "../MyFile.zip"; googledrive.EncryptionPassword = "password"; googledrive.DownloadFile(googledrive.Resource[0].Id, ""); //The transfer is interrupted and DownloadFile() above fails. Later, resume the download: //Get the size of the partially download temp file googledrive.StartByte = new FileInfo(googledrive.Config("DownloadTempFile")).Length; googledrive.DownloadFile(googledrive.Resource[0].Id, "");

Uploading Files

The UploadFile method is used to upload files.

Upload Notes

Google Drive offers two ways to upload a file. For smaller files a simple upload option is provided to upload data in one request. This is the default option. For larger files, uploads can be fragmented into multiple pieces, allowing resuming of uploads that may be interrupted.

Simple

By default the component uses the simple upload mechanism. googledrive.LocalFile = "../MyFile.zip"; googledrive.UploadFile("MyFile.zip", "");

Resumable

To enable resumable uploads set UseResumableUpload to true. This is recommended for large files. The component will automatically fragment the specified file into smaller pieces and upload each individually. FragmentSize may be set to specify the size of the fragment if desired. The default fragment size is 10 MB.

When UseResumableUpload is set to true and UploadFile is called, a resumable upload session is started by the component. ResumeURL is populated with a URL identifying the session (this value may be needed for additional operations if the upload does not complete normally).

During a resumable upload, the FragmentComplete event fires after each fragment is uploaded to indicate overall progress. The component also updates StartByte as necessary to indicate the current offset in the file.

If the upload is interrupted for any reason, resuming it is easy. First, verify that ResumeURL and StartByte are populated (if the same instance of the component is used, they should already be populated, and no special action should be needed). Then call UploadFile again to resume the upload at the specified StartByte offset.

Note that if the upload is not resumed after some time the upload session will expire. GetUploadStatus may be used to check the status of a resumable upload. googledrive.LocalFile = "../MyFile.zip"; googledrive.UploadFile("MyFile.zip", ""); //The transfer is interrupted and UploadFile() above fails. Later, resume the download. //Using the same instance StartByte and ResumeURL are already populated from the previous //upload attempt. googledrive.UploadFile("MyFile.zip", "");

Shared Drive Support

The GoogleDrive component has full support for Google Shared Drives. For the most common use-cases (such as those described above), there is very little difference when using a shared drive versus a personal Google Drive ("My Drive").

For more information about how to use the component with Google Shared Drives, refer to both the shared-drive-specific documentation sections for commonly-used methods like ListResources, MoveResource, UpdatePermissions, etc.; and browse through the documentation for shared-drive-specific methods and properties such as the AddSharedDriveMember and ListSharedDrives methods, the SharedDrive property, etc.

Additional Functionality

The GoogleDrive component offers advanced functionality beyond simple uploads and downloads. For instance:

Property List


The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

AccountCanCreateSharedDrivesWhether the account has permission to create shared drives.
AccountDriveUsageAmount of storage used in Google Drive.
AccountEmailThe email address of the account.
AccountNameThe name of the account's user.
AccountPermissionIdThe permission Id associated with the account.
AccountStorageQuotaThe account's storage quota.
AccountStorageUsageAmount of storage used across all Google services.
AccountTrashUsageAmount of storage used by trashed items in Google Drive.
AuthorizationOAuth 2.0 Authorization Token.
ChangeMarkerA marker indicating what page of changes to return next.
ChangeCountThe number of records in the Change arrays.
ChangeRemovedWhether the file or shared drive has been removed.
ChangeResourceIdThe Id of the file to which the change applies.
ChangeSharedDriveIdThe Id of the shared drive.
ChangeTimeThe time of the change.
ChangeTypeWhether the change is for a file or a shared drive.
ChildMarkerA marker when child resources are paged.
ChildCountThe number of records in the Child arrays.
ChildContentAccessibleWhether the resource's content is accessible to less-privileged users.
ChildCreatedTimeThe creation date of the resource.
ChildDescriptionA short description of the resource.
ChildExtensionThe file extension of the resource.
ChildIdThe Id of the resource.
ChildMD5ChecksumThe MD5 checksum of the file resource.
ChildMIMETypeThe MIME type of the resource.
ChildModifiedTimeThe last modified date of the resource.
ChildNameThe name of the resource.
ChildOriginalNameThe original name of the file resource.
ChildOwnerThe name of the resource's owner.
ChildOwnerEmailThe email address of the resource's owner.
ChildParentIdsThe Ids of the resource's parent folders.
ChildSharedDriveIdThe Id of the shared drive the resource is in.
ChildSizeThe size of the file resource in bytes.
ChildStarredWhether the resource is starred.
ChildTrashedWhether the resource is in the trash.
ChildTypeThe resource's type.
ChildViewedWhether the resource has been viewed.
ChildViewLinkA link for opening the resource in a relevant Google editor or viewer in a browser.
EncryptionAlgorithmThe encryption algorithm.
EncryptionPasswordThe encryption password.
FirewallAutoDetectThis property tells the component whether or not to automatically detect and use firewall system settings, if available.
FirewallTypeThis property determines the type of firewall to connect through.
FirewallHostThis property contains the name or IP address of firewall (optional).
FirewallPasswordThis property contains a password if authentication is to be used when connecting through the firewall.
FirewallPortThis property contains the transmission control protocol (TCP) port for the firewall Host .
FirewallUserThis property contains a user name if authentication is to be used connecting through a firewall.
IdleThe current status of the component.
ListResourcesScopeControls the scope of the results when listing resources.
LocalFileThe location of the local file.
LocalHostThe name of the local host or user-assigned IP interface through which connections are initiated or accepted.
NextChangeMarkerA marker indicating what page of changes to return in the future.
OAuthAccessTokenThe access token returned by the authorization server.
OAuthAuthorizationCodeThe authorization code that is exchanged for an access token.
OAuthAuthorizationScopeThe scope request or response parameter used during authorization.
OAuthClientIdThe id of the client assigned when registering the application.
OAuthClientProfileThe type of client that is requesting authorization.
OAuthClientSecretThe secret value for the client assigned when registering the application.
OAuthGrantTypeThe OAuth grant type used to acquire an OAuth access token.
OAuthRefreshTokenSpecifies the refresh token received from or sent to the authorization server.
OAuthReturnURLThe URL where the user (browser) returns after authenticating.
OAuthServerAuthURLThe URL of the authorization server.
OAuthServerTokenURLThe URL of the token server used to obtain the access token.
OAuthWebAuthURLThe URL to which the user should be re-directed for authorization.
OtherHeadersThis property includes other headers as determined by the user (optional).
OverwriteDetermines if local files are overwritten.
ParsedHeaderCountThe number of records in the ParsedHeader arrays.
ParsedHeaderFieldThis property contains the name of the HTTP header (this is the same case as it is delivered).
ParsedHeaderValueThis property contains the header contents.
PermissionMarkerA marker when permissions are paged.
PermissionCountThe number of records in the Permission arrays.
PermissionAllowFileDiscoveryWhether the permission allows the file or folder to be discovered through search.
PermissionDomainThe domain to which the permission applies.
PermissionEmailThe user or group to which the permission applies.
PermissionIdThe Id of the permission.
PermissionModOpThe operation to perform on the permission.
PermissionRoleThe role specified by the permission.
PermissionTypeThe set of users to which the permission applies.
ProxyAuthSchemeThis property is used to tell the component which type of authorization to perform when connecting to the proxy.
ProxyAutoDetectThis property tells the component whether or not to automatically detect and use proxy system settings, if available.
ProxyPasswordThis property contains a password if authentication is to be used for the proxy.
ProxyPortThis property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).
ProxyServerIf a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.
ProxySSLThis property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.
ProxyUserThis property contains a username if authentication is to be used for the proxy.
QueryParamCountThe number of records in the QueryParam arrays.
QueryParamNameThe name of the query parameter.
QueryParamValueThe value of the query parameter.
ResourceDataThe data that was downloaded, or that should be uploaded.
ResourceMarkerA marker indicating what page of resources to return next.
ResourceCountThe number of records in the Resource arrays.
ResourceContentAccessibleWhether the resource's content is accessible to less-privileged users.
ResourceCreatedTimeThe creation date of the resource.
ResourceDescriptionA short description of the resource.
ResourceExtensionThe file extension of the resource.
ResourceIdThe Id of the resource.
ResourceMD5ChecksumThe MD5 checksum of the file resource.
ResourceMIMETypeThe MIME type of the resource.
ResourceModifiedTimeThe last modified date of the resource.
ResourceNameThe name of the resource.
ResourceOriginalNameThe original name of the file resource.
ResourceOwnerThe name of the resource's owner.
ResourceOwnerEmailThe email address of the resource's owner.
ResourceParentIdsThe Ids of the resource's parent folders.
ResourceSharedDriveIdThe Id of the shared drive the resource is in.
ResourceSizeThe size of the file resource in bytes.
ResourceStarredWhether the resource is starred.
ResourceTrashedWhether the resource is in the trash.
ResourceTypeThe resource's type.
ResourceViewedWhether the resource has been viewed.
ResourceViewLinkA link for opening the resource in a relevant Google editor or viewer in a browser.
ResumeURLThe resumable upload URL.
SharedDriveThe shared drive to list file and folder resources for.
SharedDriveMarkerA marker when shared drives are paged.
SharedDriveCountThe number of records in the SharedDrive arrays.
SharedDriveCapabilitiesThe capabilities that the current user has for the shared drive.
SharedDriveCreatedTimeThe creation date of the shared drive.
SharedDriveHiddenWhether the shared drive is hidden from default view.
SharedDriveIdThe Id of the shared drive.
SharedDriveNameThe name of the shared drive.
SharedDriveRestrictionsThe restrictions that apply to the shared drive.
SSLAcceptServerCertEncodedThis is the certificate (PEM/Base64 encoded).
SSLCertEncodedThis is the certificate (PEM/Base64 encoded).
SSLCertStoreThis is the name of the certificate store for the client certificate.
SSLCertStorePasswordIf the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSLCertStoreTypeThis is the type of certificate store for this certificate.
SSLCertSubjectThis is the subject of the certificate used for client authentication.
SSLProviderThis specifies the SSL/TLS implementation to use.
SSLServerCertEncodedThis is the certificate (PEM/Base64 encoded).
StartByteThe byte offset from which to start the upload or download.
TimeoutA timeout for the component.
UseResumableUploadWhether to use resumable uploads.

Method List


The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

AddParentsAdds folders to the list of parents for a file or folder.
AddQueryParamAdds a query parameter to the QueryParams properties.
AddSharedDriveMemberCreates a new shared drive member.
AuthorizeGet the authorization string required to access the protected resource.
CalcAuthorizationCalculates the Authorization header based on provided credentials.
ConfigSets or retrieves a configuration setting.
CopyResourceCopies a file.
CreateFolderCreates a new folder.
CreateSharedDriveCreates a new shared drive.
DeleteResourceDeletes the specified file or folder permanently.
DeleteSharedDriveDeletes a shared drive.
DownloadFileDownloads, and optionally converts, a file.
EmptyTrashPermanently deletes all of the current user's trashed files.
GetAccountInfoGets information about the current user's account and space usage.
GetCurrentChangeMarkerGets the most current change marker.
GetPermissionInfoGets information about a specific permission.
GetResourceInfoGets information about specific files and folders.
GetSharedDriveInfoGets information about a specific shared drive.
GetUploadStatusGets the status of a resumable upload session.
InterruptInterrupt the current method.
ListChangesLists changes to resources and shared drives.
ListChildrenLists the child resources of one or more folders.
ListParentsLists the parent folders of a file or folder.
ListPermissionsLists the permissions for a file, folder, or shared drive.
ListResourcesLists files and folders.
ListRevisionsList the revisions of a file.
ListSharedDrivesLists shared drives that the current user is a member of.
MoveResourceMoves a file or folder.
RemoveParentsRemoves folders from the list of parents for a file or folder.
RemoveSharedDriveMemberRemoves an existing shared drive member.
ResetResets the component to its initial state.
RestoreResourceRestores a file or folder from the trash.
SendCustomRequestSends a custom request to the Google Drive API.
ToggleSharedDriveHiddenHides or unhides a shared drive.
TrashResourceMoves the specified file or folder to the trash.
UpdatePermissionsCreate, update, and delete permissions on a file, folder, or shared drive.
UpdateResourceUpdates a file or folder.
UpdateSharedDriveUpdates a shared drive.
UpdateSharedDriveMemberUpdates an existing shared drive member's role.
UploadFileUploads, and optionally converts, a new file.

Event List


The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

ChangeListFires once for each change when ListChanges is called.
EndTransferThis event fires when a document finishes transferring.
ErrorFired when information is available about errors during data delivery.
FragmentCompleteFires after each fragment of a resumable upload is completed.
HeaderThis event is fired every time a header line comes in.
LogThis event fires once for each log message.
PermissionListThis event fires once for each permission returned when listing permissions.
ProgressFires during an upload or download to indicate transfer progress.
ResourceListFires once for each resource returned when listing resources.
SharedDriveListFires once for each shared drive returned when listing shared drives.
SSLServerAuthenticationFired after the server presents its certificate to the client.
SSLStatusFired when secure connection progress messages are available.
StartTransferThis event fires when a document starts transferring (after the headers).
TransferThis event is fired while a document transfers (delivers document).

Config Settings


The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AccumulatePagesWhether the component should accumulate subsequent pages of results when listing them.
DocsExportFormatThe file format to export Google Docs files as when downloading.
DownloadTempFileThe temporary file used when downloading encrypted data.
DrawingsExportFormatThe file format to export Google Drawings files as when downloading.
EncryptionIVThe initialization vector to be used for encryption/decryption.
EncryptionKeyThe key to use during encryption/decryption.
EncryptionPasswordKDFThe KDF algorithm to use during password based encryption and decryption.
FragmentSizeThe fragment size.
IconLink[i]A static, unauthenticated link to the file icon for the specified resource.
IncludeAllFieldsWhether to request all fields when listing resources.
IncludeFolderPropertiesWhether resource properties apply when calling CreateFolder.
ListResourcesModeWhat items to include when listing resources.
MaxPermissionResultsLimits the number of permissions results.
MaxResultsLimits the number of resource and change results.
MaxSharedDriveResultsLimits the number of shared drive results.
NormalizedFileName[i]File name constructed using the specified resource's information.
OAuthAccessTokenExpirationThe lifetime of the access token.
OAuthAuthorizationTokenTypeThe type of access token returned.
OAuthAutomaticRefreshWhether or not to refresh an expired access token automatically.
OAuthBrowserResponseTimeoutSpecifies the amount of time to wait for a response from the browser.
OAuthIncludeEmptyRedirectURIWhether an empty redirect_uri parameter is included in requests.
OAuthJWTPayloadThe payload of the JWT access token if present.
OAuthJWTXChildCountThe number of child elements of the current element.
OauthJWTXChildName[i]The name of the child element.
OAuthJWTXChildXText[i]The inner text of the child element.
OAuthJWTXElementThe name of the current element.
OauthJWTXParentThe parent of the current element.
OAuthJWTXPathProvides a way to point to a specific element in the returned payload of a JWT based access token.
OAuthJWTXSubTreeA snapshot of the current element in the document.
OAuthJWTXTextThe text of the current element.
OAuthParamCountSpecifies the number of additional parameters variables to include in the request.
OAuthParamName[i]Specifies the parameter name at the specified index.
OAuthParamValue[i]Specifies the parameter value at the specified index.
OAuthPasswordGrantUsernameUsed in the Resource Owner Password grant type.
OAuthPKCEChallengeEncodingThe PKCE code challenge method to use.
OAuthPKCEVerifierThe PKCE verifier used to generate the challenge.
OAuthReUseWebServerDetermines if the same server instance is used between requests.
OAuthUsePKCESpecifies if PKCE should be used.
OAuthWebServerActiveSpecifies and controls whether the embedded web server is active.
OAuthWebServerCertStoreThe certificate with private key to use when SSL is enabled.
OAuthWebServerCertStorePasswordThe certificate with private key to use when SSL is enabled.
OAuthWebServerCertStoreTypeThe certificate with private key to use when SSL is enabled.
OAuthWebServerCertSubjectThe certificate with private key to use when SSL is enabled.
OAuthWebServerFailedResponseThe custom response that will be displayed to the user if authentication failed.
OAuthWebServerHostThe hostname used by the embedded web server displayed in the ReturnURL.
OAuthWebServerPortThe local port on which the embedded web server listens.
OAuthWebServerResponseThe custom response that will be displayed to the user.
OAuthWebServerSSLEnabledWhether the web server requires SSL connections.
ProgressAbsoluteWhether the component should track transfer progress absolutely.
ProgressStepHow often the progress event should be fired, in terms of percentage.
RawRequestReturns the data that was sent to the server.
RawResponseReturns the data that was received from the server.
RequestedFieldsWhat fields to request when listing or getting objects.
ResourceKey[i]The resource key used to access a file.
RevisionIdThe ID of the revision to make request against.
SearchIncompleteIndicates whether the server declined to search all possible locations when listing resources.
SheetsExportFormatThe file format to export Google Sheets files as when downloading.
SlidesExportFormatThe file format to export Google Slides files as when downloading.
TempPathThe path to the directory where temporary files are created.
TransferOwnershipMust be set to True before modifying permissions in a manner that causes the owner of a resource to change.
UseDomainAdminAccessWhether to make requests using domain administrator permissions.
XChildCountThe number of child elements of the current element.
XChildName[i]The name of the child element.
XChildXText[i]The inner text of the child element.
XElementThe name of the current element.
XParentThe parent of the current element.
XPathProvides a way to point to a specific element in the returned XML or JSON response.
XSubTreeA snapshot of the current element in the document.
XTextThe text of the current element.
AcceptEncodingUsed to tell the server which types of content encodings the client supports.
AllowHTTPCompressionThis property enables HTTP compression for receiving data.
AllowHTTPFallbackWhether HTTP/2 connections are permitted to fallback to HTTP/1.1.
AppendWhether to append data to LocalFile.
AuthorizationThe Authorization string to be sent to the server.
BytesTransferredContains the number of bytes transferred in the response data.
ChunkSizeSpecifies the chunk size in bytes when using chunked encoding.
CompressHTTPRequestSet to true to compress the body of a PUT or POST request.
EncodeURLIf set to True the URL will be encoded by the component.
FollowRedirectsDetermines what happens when the server issues a redirect.
GetOn302RedirectIf set to True the component will perform a GET on the new location.
HTTP2HeadersWithoutIndexingHTTP2 headers that should not update the dynamic header table with incremental indexing.
HTTPVersionThe version of HTTP used by the component.
IfModifiedSinceA date determining the maximum age of the desired document.
KeepAliveDetermines whether the HTTP connection is closed after completion of the request.
KerberosSPNThe Service Principal Name for the Kerberos Domain Controller.
LogLevelThe level of detail that is logged.
MaxRedirectAttemptsLimits the number of redirects that are followed in a request.
NegotiatedHTTPVersionThe negotiated HTTP version.
OtherHeadersOther headers as determined by the user (optional).
ProxyAuthorizationThe authorization string to be sent to the proxy server.
ProxyAuthSchemeThe authorization scheme to be used for the proxy.
ProxyPasswordA password if authentication is to be used for the proxy.
ProxyPortPort for the proxy server (default 80).
ProxyServerName or IP address of a proxy server (optional).
ProxyUserA user name if authentication is to be used for the proxy.
SentHeadersThe full set of headers as sent by the client.
StatusCodeThe status code of the last response from the server.
StatusLineThe first line of the last response from the server.
TransferredDataThe contents of the last response from the server.
TransferredDataLimitThe maximum number of incoming bytes to be stored by the component.
TransferredHeadersThe full set of headers as received from the server.
TransferredRequestThe full request as sent by the client.
UseChunkedEncodingEnables or Disables HTTP chunked encoding for transfers.
UseIDNsWhether to encode hostnames to internationalized domain names.
UseProxyAutoConfigURLWhether to use a Proxy auto-config file when attempting a connection.
UserAgentInformation about the user agent (browser).
ConnectionTimeoutSets a separate timeout value for establishing a connection.
FirewallAutoDetectTells the component whether or not to automatically detect and use firewall system settings, if available.
FirewallHostName or IP address of firewall (optional).
FirewallPasswordPassword to be used if authentication is to be used when connecting through the firewall.
FirewallPortThe TCP port for the FirewallHost;.
FirewallTypeDetermines the type of firewall to connect through.
FirewallUserA user name if authentication is to be used connecting through a firewall.
KeepAliveIntervalThe retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTimeThe inactivity time in milliseconds before a TCP keep-alive packet is sent.
LingerWhen set to True, connections are terminated gracefully.
LingerTimeTime in seconds to have the connection linger.
LocalHostThe name of the local host through which connections are initiated or accepted.
LocalPortThe port in the local host where the component binds.
MaxLineLengthThe maximum amount of data to accumulate when no EOL is found.
MaxTransferRateThe transfer rate limit in bytes per second.
ProxyExceptionsListA semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAliveDetermines whether or not the keep alive socket option is enabled.
TcpNoDelayWhether or not to delay when sending packets.
UseIPv6Whether to use IPv6.
LogSSLPacketsControls whether SSL packets are logged when using the internal security API.
OpenSSLCADirThe path to a directory containing CA certificates.
OpenSSLCAFileName of the file containing the list of CA's trusted by your application.
OpenSSLCipherListA string that controls the ciphers to be used by SSL.
OpenSSLPrngSeedDataThe data to seed the pseudo random number generator (PRNG).
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCACertsA newline separated list of CA certificate to use during SSL client authentication.
SSLCheckCRLWhether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSPWhether to use OCSP to check the status of the server certificate.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLEnableRenegotiationWhether the renegotiation_info SSL extension is supported.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFileThe location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipherReturns the negotiated cipher suite.
SSLNegotiatedCipherStrengthReturns the negotiated cipher suite strength.
SSLNegotiatedCipherSuiteReturns the negotiated cipher suite.
SSLNegotiatedKeyExchangeReturns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrengthReturns the negotiated key exchange algorithm strength.
SSLNegotiatedVersionReturns the negotiated protocol version.
SSLSecurityFlagsFlags that control certificate verification.
SSLServerCACertsA newline separated list of CA certificate to use during SSL server certificate validation.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallDataUsed to send extra data to the firewall.
InBufferSizeThe size in bytes of the incoming queue of the socket.
OutBufferSizeThe size in bytes of the outgoing queue of the socket.
BuildInfoInformation about the product's build.
CodePageThe system code page used for Unicode to Multibyte translations.
LicenseInfoInformation about the current license.
MaskSensitiveWhether sensitive data is masked in log messages.
UseFIPSCompliantAPITells the component whether or not to use FIPS certified APIs.
UseInternalSecurityAPIWhether or not to use the system security libraries or an internal implementation.

AccountCanCreateSharedDrives Property (GoogleDrive Component)

Whether the account has permission to create shared drives.

Syntax

__property bool AccountCanCreateSharedDrives = { read=FAccountCanCreateSharedDrives };

Default Value

false

Remarks

Whether the account has permission to create shared drives.

This property reflects whether the account has the permissions necessary to create shared drives.

This property is read-only and not available at design time.

Data Type

Boolean

AccountDriveUsage Property (GoogleDrive Component)

Amount of storage used in Google Drive.

Syntax

__property __int64 AccountDriveUsage = { read=FAccountDriveUsage };

Default Value

-1

Remarks

Amount of storage used in Google Drive.

This property reflects the storage usage, in bytes, for all items in the account's Google Drive (including trashed items).

This property is read-only and not available at design time.

Data Type

Long64

AccountEmail Property (GoogleDrive Component)

The email address of the account.

Syntax

__property String AccountEmail = { read=FAccountEmail };

Default Value

""

Remarks

The email address of the account.

This property reflects the email address associated with the account.

This property is read-only and not available at design time.

Data Type

String

AccountName Property (GoogleDrive Component)

The name of the account's user.

Syntax

__property String AccountName = { read=FAccountName };

Default Value

""

Remarks

The name of the account's user.

This property reflects the name of the account's user.

This property is read-only and not available at design time.

Data Type

String

AccountPermissionId Property (GoogleDrive Component)

The permission Id associated with the account.

Syntax

__property String AccountPermissionId = { read=FAccountPermissionId };

Default Value

""

Remarks

The permission Id associated with the account.

This property reflects the permission Id associated with the account. Any permissions (including shared drive memberships) created for this account will include this Id.

This property is read-only and not available at design time.

Data Type

String

AccountStorageQuota Property (GoogleDrive Component)

The account's storage quota.

Syntax

__property __int64 AccountStorageQuota = { read=FAccountStorageQuota };

Default Value

-1

Remarks

The account's storage quota.

This property reflects the account's storage quota, in bytes, across all Google services (Google Drive, Gmail, etc.).

A value of -1 indicates that the account does not have a storage quota (i.e., it has unlimited storage).

This property is read-only and not available at design time.

Data Type

Long64

AccountStorageUsage Property (GoogleDrive Component)

Amount of storage used across all Google services.

Syntax

__property __int64 AccountStorageUsage = { read=FAccountStorageUsage };

Default Value

-1

Remarks

Amount of storage used across all Google services.

This property reflects the account's total storage usage, in bytes, across all Google services (Google Drive, Gmail, etc.).

This property is read-only and not available at design time.

Data Type

Long64

AccountTrashUsage Property (GoogleDrive Component)

Amount of storage used by trashed items in Google Drive.

Syntax

__property __int64 AccountTrashUsage = { read=FAccountTrashUsage };

Default Value

-1

Remarks

Amount of storage used by trashed items in Google Drive.

This property reflects the storage usage, in bytes, for all trashed items in the account's Google Drive.

This property is read-only and not available at design time.

Data Type

Long64

Authorization Property (GoogleDrive Component)

OAuth 2.0 Authorization Token.

Syntax

__property String Authorization = { read=FAuthorization, write=FSetAuthorization };

Default Value

""

Remarks

This component supports authentication via OAuth 2.0. First, perform OAuth authentication using the OAuth* properties, using the OAuth component or a separate process. If using the OAuth* properties, then the Authorization property will not be used.

Bearer ACCESS_TOKEN
Assign this value to the Authorization property before attempting any operations. Consult the documentation for the service for more information about supported scope values and more details on OAuth authentication.

Data Type

String

ChangeMarker Property (GoogleDrive Component)

A marker indicating what page of changes to return next.

Syntax

__property String ChangeMarker = { read=FChangeMarker, write=FSetChangeMarker };

Default Value

""

Remarks

This property will be populated when ListChanges is called if the results are paged and there are more pages. To list all changes, continue to call ListChanges until this property returns empty string.

Setting ChangeMarker will cause NextChangeMarker to be set to empty string.

Refer to ListChanges for more information.

This property is not available at design time.

Data Type

String

ChangeCount Property (GoogleDrive Component)

The number of records in the Change arrays.

Syntax

__property int ChangeCount = { read=FChangeCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at ChangeCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ChangeRemoved Property (GoogleDrive Component)

Whether the file or shared drive has been removed.

Syntax

__property bool ChangeRemoved[int ChangeIndex] = { read=FChangeRemoved };

Default Value

false

Remarks

Whether the file or shared drive has been removed.

This property indicates whether the file or shared drive to which the change applies has been removed.

The ChangeIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChangeCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ChangeResourceId Property (GoogleDrive Component)

The Id of the file to which the change applies.

Syntax

__property String ChangeResourceId[int ChangeIndex] = { read=FChangeResourceId };

Default Value

""

Remarks

The Id of the file to which the change applies.

This property holds the Id of the file to which the change applies.

The ChangeIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChangeCount property.

This property is read-only and not available at design time.

Data Type

String

ChangeSharedDriveId Property (GoogleDrive Component)

The Id of the shared drive.

Syntax

__property String ChangeSharedDriveId[int ChangeIndex] = { read=FChangeSharedDriveId };

Default Value

""

Remarks

The Id of the shared drive.

This property holds the Id of the shared drive to which the change applies (if ChangeType is ctSharedDrive (1)), or which owns the file to which the change applies (if ChangeType is ctFile (0)).

The ChangeIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChangeCount property.

This property is read-only and not available at design time.

Data Type

String

ChangeTime Property (GoogleDrive Component)

The time of the change.

Syntax

__property String ChangeTime[int ChangeIndex] = { read=FChangeTime };

Default Value

""

Remarks

The time of the change.

This property holds the time of the change. This is a combined date-time value (formatted according to RFC 3339).

The ChangeIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChangeCount property.

This property is read-only and not available at design time.

Data Type

String

ChangeType Property (GoogleDrive Component)

Whether the change is for a file or a shared drive.

Syntax

__property TcsGoogleDriveChangeTypes ChangeType[int ChangeIndex] = { read=FChangeType };
enum TcsGoogleDriveChangeTypes { ctFile=0, ctSharedDrive=1 };

Default Value

ctFile

Remarks

Whether the change is for a file or a shared drive.

This property indicates whether the change applies to a file or a shared drive. Possible values are:

  • ctFile (0)
  • ctSharedDrive (1)

The ChangeIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChangeCount property.

This property is read-only and not available at design time.

Data Type

Integer

ChildMarker Property (GoogleDrive Component)

A marker when child resources are paged.

Syntax

__property String ChildMarker = { read=FChildMarker, write=FSetChildMarker };

Default Value

""

Remarks

This property returns a marker used to iterate over pages of child resources; it's populated when ListChildren is called if the results are paged.

Continue to call ListChildren until this property returns empty string in order to list all resources.

This property is not available at design time.

Data Type

String

ChildCount Property (GoogleDrive Component)

The number of records in the Child arrays.

Syntax

__property int ChildCount = { read=FChildCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at ChildCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ChildContentAccessible Property (GoogleDrive Component)

Whether the resource's content is accessible to less-privileged users.

Syntax

__property bool ChildContentAccessible[int ChildIndex] = { read=FChildContentAccessible };

Default Value

false

Remarks

Whether the resource's content is accessible to less-privileged users.

This property indicates whether the resource's content is accessible. If the resource is not accessible, it cannot be copied, downloaded, or printed by a users unless they have at least "writer" permissions.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ChildCreatedTime Property (GoogleDrive Component)

The creation date of the resource.

Syntax

__property String ChildCreatedTime[int ChildIndex] = { read=FChildCreatedTime };

Default Value

""

Remarks

The creation date of the resource.

This property holds a DateTime string representing the creation date of the resource. This is a combined date-time value (formatted according to RFC 3339).

Note that while this property is writable, the component only uses it as input when UploadFile is called; it is ignored when calling UpdateResource.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildDescription Property (GoogleDrive Component)

A short description of the resource.

Syntax

__property String ChildDescription[int ChildIndex] = { read=FChildDescription };

Default Value

""

Remarks

A short description of the resource.

This property specifies a short description of the resource.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildExtension Property (GoogleDrive Component)

The file extension of the resource.

Syntax

__property String ChildExtension[int ChildIndex] = { read=FChildExtension };

Default Value

""

Remarks

The file extension of the resource.

This property indicates the file extension of the resource. It cannot be set, and is empty for folder resources. To specify the extension when creating a new file resource include it when calling UploadFile.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildId Property (GoogleDrive Component)

The Id of the resource.

Syntax

__property String ChildId[int ChildIndex] = { read=FChildId };

Default Value

""

Remarks

The Id of the resource.

This property holds the Id of the resource.

This property must be set before calling UpdateResource.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildMD5Checksum Property (GoogleDrive Component)

The MD5 checksum of the file resource.

Syntax

__property String ChildMD5Checksum[int ChildIndex] = { read=FChildMD5Checksum };

Default Value

""

Remarks

The MD5 checksum of the file resource.

This property holds the MD5 checksum of the resource, if it is a file resource.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildMIMEType Property (GoogleDrive Component)

The MIME type of the resource.

Syntax

__property String ChildMIMEType[int ChildIndex] = { read=FChildMIMEType };

Default Value

""

Remarks

The MIME type of the resource.

This property specifies the MIME type of the resource.

When calling UploadFile, this property is ignored in favor of the MimeType parameter of UploadFile.

When calling UpdateResource, this property is only submitted if new file data is being uploaded.

Some Google Drive MIME types:

application/vnd.google-apps.audio
application/vnd.google-apps.document Google Docs
application/vnd.google-apps.drawing Google Drawing
application/vnd.google-apps.file Google Drive file
application/vnd.google-apps.folder Google Drive folder
application/vnd.google-apps.form Google Forms
application/vnd.google-apps.fusiontable Google Fusion Tables
application/vnd.google-apps.kix Google Docs
application/vnd.google-apps.photo
application/vnd.google-apps.presentation Google Slides
application/vnd.google-apps.script Google Apps Scripts
application/vnd.google-apps.sites Google Sites
application/vnd.google-apps.spreadsheet Google Sheets
application/vnd.google-apps.unknown
application/vnd.google-apps.video

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildModifiedTime Property (GoogleDrive Component)

The last modified date of the resource.

Syntax

__property String ChildModifiedTime[int ChildIndex] = { read=FChildModifiedTime };

Default Value

""

Remarks

The last modified date of the resource.

This property holds a DateTime string representing the last modified date of the resource. This is a combined date-time value (formatted according to RFC 3339).

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildName Property (GoogleDrive Component)

The name of the resource.

Syntax

__property String ChildName[int ChildIndex] = { read=FChildName };

Default Value

""

Remarks

The name of the resource.

This property specifies the name of the resource.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildOriginalName Property (GoogleDrive Component)

The original name of the file resource.

Syntax

__property String ChildOriginalName[int ChildIndex] = { read=FChildOriginalName };

Default Value

""

Remarks

The original name of the file resource.

This property specifies the original name of a file resource if the file was uploaded manually, or if the name was set programmatically through the API.

Updating ChildName will not change this value.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildOwner Property (GoogleDrive Component)

The name of the resource's owner.

Syntax

__property String ChildOwner[int ChildIndex] = { read=FChildOwner };

Default Value

""

Remarks

The name of the resource's owner.

This property holds the name of resource's owner.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildOwnerEmail Property (GoogleDrive Component)

The email address of the resource's owner.

Syntax

__property String ChildOwnerEmail[int ChildIndex] = { read=FChildOwnerEmail };

Default Value

""

Remarks

The email address of the resource's owner.

This property holds the email address of the resource's owner.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildParentIds Property (GoogleDrive Component)

The Ids of the resource's parent folders.

Syntax

__property String ChildParentIds[int ChildIndex] = { read=FChildParentIds };

Default Value

""

Remarks

The Ids of the resource's parent folders.

This property holds a comma-separated list of Ids for the resource's parent folders.

Note that while this property is writable, the component only uses it as input when UploadFile is called. To modify a resource's parents in any other case, use the AddParents, RemoveParents, and MoveResource methods.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildSharedDriveId Property (GoogleDrive Component)

The Id of the shared drive the resource is in.

Syntax

__property String ChildSharedDriveId[int ChildIndex] = { read=FChildSharedDriveId };

Default Value

""

Remarks

The Id of the shared drive the resource is in.

This property holds the Id of the shared drive that the resource is in, if applicable.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

ChildSize Property (GoogleDrive Component)

The size of the file resource in bytes.

Syntax

__property __int64 ChildSize[int ChildIndex] = { read=FChildSize };

Default Value

0

Remarks

The size of the file resource in bytes.

This property holds the size of a file resource in bytes. This is only applicable to files.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

Long64

ChildStarred Property (GoogleDrive Component)

Whether the resource is starred.

Syntax

__property bool ChildStarred[int ChildIndex] = { read=FChildStarred };

Default Value

false

Remarks

Whether the resource is starred.

This property indicates whether the resource is starred by the current user.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ChildTrashed Property (GoogleDrive Component)

Whether the resource is in the trash.

Syntax

__property bool ChildTrashed[int ChildIndex] = { read=FChildTrashed };

Default Value

false

Remarks

Whether the resource is in the trash.

This property indicates whether the resource has been moved to trash.

Note that while this property is writable, the component only uses it as input when UpdateResource is called; it is ignored when calling UploadFile.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ChildType Property (GoogleDrive Component)

The resource's type.

Syntax

__property TcsGoogleDriveChildTypes ChildType[int ChildIndex] = { read=FChildType };
enum TcsGoogleDriveChildTypes { gdrtFile=0, gdrtFolder=1 };

Default Value

gdrtFile

Remarks

The resource's type.

This property indicates whether the resource is a folder or a file. Possible values are:

0 (gdrtFile) A file.
1 (gdrtFolder) A folder.
2 (gdrtRevision) A revision.

Google treats files and folders in the same way, and folders are included when listing resources. The ResourceType property can be used to determine if a resource is a folder, a file, or a revision of a file.

To list, delete, and update folders use the ListResources, DeleteResource, and UpdateResource methods.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

Integer

ChildViewed Property (GoogleDrive Component)

Whether the resource has been viewed.

Syntax

__property bool ChildViewed[int ChildIndex] = { read=FChildViewed };

Default Value

false

Remarks

Whether the resource has been viewed.

This property indicates whether the resource has been viewed by the current user.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ChildViewLink Property (GoogleDrive Component)

A link for opening the resource in a relevant Google editor or viewer in a browser.

Syntax

__property String ChildViewLink[int ChildIndex] = { read=FChildViewLink };

Default Value

""

Remarks

A link for opening the resource in a relevant Google editor or viewer in a browser.

This property holds the link to the resource. The link may be used to view the resource in a browser or relevant editor.

The ChildIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChildCount property.

This property is read-only and not available at design time.

Data Type

String

EncryptionAlgorithm Property (GoogleDrive Component)

The encryption algorithm.

Syntax

__property TcsGoogleDriveEncryptionAlgorithms EncryptionAlgorithm = { read=FEncryptionAlgorithm, write=FSetEncryptionAlgorithm };
enum TcsGoogleDriveEncryptionAlgorithms { eaAES=0, eaBlowfish=1, eaCAST=2, eaDES=3, eaIDEA=4, eaRC2=5, eaRC4=6, eaTEA=7, eaTripleDES=8, eaTwofish=9, eaRijndael=10, eaChaCha=11, eaXSalsa20=12 };

Default Value

eaAES

Remarks

This property specifies the encryption algorithm to be used. The maximum allowable key size is automatically used for the selected algorithm. Possible values are:

Algorithm Key Size
0 (eaAES - default) 256
1 (eaBlowfish) 448
2 (eaCAST) 128
3 (eaDES) 64
4 (eaIDEA) 128
5 (eaRC2) 128
6 (eaRC4) 2048
7 (eaTEA) 128
8 (eaTripleDES) 192
9 (eaTwofish) 256
10 (eaRijndael) 256
11 (eaChaCha) 256
12 (eaXSalsa20) 256

Data Type

Integer

EncryptionPassword Property (GoogleDrive Component)

The encryption password.

Syntax

__property String EncryptionPassword = { read=FEncryptionPassword, write=FSetEncryptionPassword };

Default Value

""

Remarks

If this property is populated when UploadFile or DownloadFile is called, the component will attempt to encrypt or decrypt the data before uploading or after downloading it.

The component uses the value specified here to generate the necessary encryption Key and IV values using the PKCS5 password digest algorithm. This provides a simpler alternative to creating and managing Key and IV values directly.

However, it is also possible to explicitly specify the Key and IV values to use by setting the EncryptionKey and EncryptionIV configuration settings. This may be necessary if, e.g., the data needs to be encrypted/decrypted by another utility which generates Key and IV values differently.

This property is not available at design time.

Data Type

String

FirewallAutoDetect Property (GoogleDrive Component)

This property tells the component whether or not to automatically detect and use firewall system settings, if available.

Syntax

__property bool FirewallAutoDetect = { read=FFirewallAutoDetect, write=FSetFirewallAutoDetect };

Default Value

False

Remarks

This property tells the component whether or not to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (GoogleDrive Component)

This property determines the type of firewall to connect through.

Syntax

__property TcsGoogleDriveFirewallTypes FirewallType = { read=FFirewallType, write=FSetFirewallType };
enum TcsGoogleDriveFirewallTypes { fwNone=0, fwTunnel=1, fwSOCKS4=2, fwSOCKS5=3, fwSOCKS4A=10 };

Default Value

fwNone

Remarks

This property determines the type of firewall to connect through. The applicable values are as follows:

fwNone (0)No firewall (default setting).
fwTunnel (1)Connect through a tunneling proxy. FirewallPort is set to 80.
fwSOCKS4 (2)Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
fwSOCKS5 (3)Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
fwSOCKS4A (10)Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Data Type

Integer

FirewallHost Property (GoogleDrive Component)

This property contains the name or IP address of firewall (optional).

Syntax

__property String FirewallHost = { read=FFirewallHost, write=FSetFirewallHost };

Default Value

""

Remarks

This property contains the name or IP address of firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the component raises an exception.

Data Type

String

FirewallPassword Property (GoogleDrive Component)

This property contains a password if authentication is to be used when connecting through the firewall.

Syntax

__property String FirewallPassword = { read=FFirewallPassword, write=FSetFirewallPassword };

Default Value

""

Remarks

This property contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Data Type

String

FirewallPort Property (GoogleDrive Component)

This property contains the transmission control protocol (TCP) port for the firewall Host .

Syntax

__property int FirewallPort = { read=FFirewallPort, write=FSetFirewallPort };

Default Value

0

Remarks

This property contains the transmission control protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (GoogleDrive Component)

This property contains a user name if authentication is to be used connecting through a firewall.

Syntax

__property String FirewallUser = { read=FFirewallUser, write=FSetFirewallUser };

Default Value

""

Remarks

This property contains a user name if authentication is to be used connecting through a firewall. If the FirewallHost is specified, this property and FirewallPassword properties are used to connect and authenticate to the given Firewall. If the authentication fails, the component raises an exception.

Data Type

String

Idle Property (GoogleDrive Component)

The current status of the component.

Syntax

__property bool Idle = { read=FIdle };

Default Value

True

Remarks

Idle will be False if the component is currently busy (communicating and/or waiting for an answer), and True at all other times.

This property is read-only.

Data Type

Boolean

ListResourcesScope Property (GoogleDrive Component)

Controls the scope of the results when listing resources.

Syntax

__property TcsGoogleDriveListResourcesScopes ListResourcesScope = { read=FListResourcesScope, write=FSetListResourcesScope };
enum TcsGoogleDriveListResourcesScopes { lrsUser=0, lrsDomain=1, lrsSharedDrive=2, lrsAllDrives=3 };

Default Value

lrsUser

Remarks

This property controls the scope of the results when listing resources with ListResources or ListChildren. Valid values are:

lrsUser (0) (default) Items in the user's "My Drive" and "Shared with me" collections.
lrsDomain (1) Items shared to the user's domain.
lrsSharedDrive (2) Items within the shared drive specified by the SharedDrive property.
lrsAllDrives (3) Items in the user's "My Drive" and "Shared with me" collections, as well as all items in all shared drives that the user is a member of.

Refer to ListResources for more information.

This property is not available at design time.

Data Type

Integer

LocalFile Property (GoogleDrive Component)

The location of the local file.

Syntax

__property String LocalFile = { read=FLocalFile, write=FSetLocalFile };

Default Value

""

Remarks

This property specifies the location of a file on disk. This is used as the source file when calling UploadFile or UpdateResource, and as the destination file when calling DownloadFile.

Data Type

String

LocalHost Property (GoogleDrive Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

__property String LocalHost = { read=FLocalHost, write=FSetLocalHost };

Default Value

""

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

NextChangeMarker Property (GoogleDrive Component)

A marker indicating what page of changes to return in the future.

Syntax

__property String NextChangeMarker = { read=FNextChangeMarker, write=FSetNextChangeMarker };

Default Value

""

Remarks

This property will be populated when ListChanges is called if there are no more changes to list.

This property will be populated with the most current change marker if GetCurrentChangeMarker is called.

Setting NextChangeMarker will cause ChangeMarker to be set to empty string.

Refer to ListChanges for more information.

This property is not available at design time.

Data Type

String

OAuthAccessToken Property (GoogleDrive Component)

The access token returned by the authorization server.

Syntax

__property String OAuthAccessToken = { read=FOAuthAccessToken, write=FSetOAuthAccessToken };

Default Value

""

Remarks

The access token returned by the authorization server. This is set when the component makes a request to the token server.

This property is not available at design time.

Data Type

String

OAuthAuthorizationCode Property (GoogleDrive Component)

The authorization code that is exchanged for an access token.

Syntax

__property String OAuthAuthorizationCode = { read=FOAuthAuthorizationCode, write=FSetOAuthAuthorizationCode };

Default Value

""

Remarks

The authorization code that is exchanged for an access token. This is required to be set when the OAuthClientProfile property is set to the Web profile. Otherwise, this field is for information purposes only.

This property is not available at design time.

Data Type

String

OAuthAuthorizationScope Property (GoogleDrive Component)

The scope request or response parameter used during authorization.

Syntax

__property String OAuthAuthorizationScope = { read=FOAuthAuthorizationScope, write=FSetOAuthAuthorizationScope };

Default Value

""

Remarks

The scope request or response parameter used during authorization.

This property is not available at design time.

Data Type

String

OAuthClientId Property (GoogleDrive Component)

The id of the client assigned when registering the application.

Syntax

__property String OAuthClientId = { read=FOAuthClientId, write=FSetOAuthClientId };

Default Value

""

Remarks

The id of the client assigned when registering the application.

This property is not available at design time.

Data Type

String

OAuthClientProfile Property (GoogleDrive Component)

The type of client that is requesting authorization.

Syntax

__property TcsGoogleDriveOAuthClientProfiles OAuthClientProfile = { read=FOAuthClientProfile, write=FSetOAuthClientProfile };
enum TcsGoogleDriveOAuthClientProfiles { cocpApplication=0, cocpWeb=1 };

Default Value

cocpApplication

Remarks

The type of client that is requesting authorization. See the introduction section for more information. Possible values are:

0 (cocpApplication - Default)The application profile is applicable to applications that are run by the user directly. For instance a windows form application would use the application profile. To authorize your application (client) using the application profile see the introduction section.
1 (cocpWeb)The Web profile is applicable to applications that are run on the server side where the user uses the application from a web browser. To authorize your application (client) using this profile follow see the introduction section.

This property is not available at design time.

Data Type

Integer

OAuthClientSecret Property (GoogleDrive Component)

The secret value for the client assigned when registering the application.

Syntax

__property String OAuthClientSecret = { read=FOAuthClientSecret, write=FSetOAuthClientSecret };

Default Value

""

Remarks

The secret value for the client assigned when registering the application.

This property is not available at design time.

Data Type

String

OAuthGrantType Property (GoogleDrive Component)

The OAuth grant type used to acquire an OAuth access token.

Syntax

__property TcsGoogleDriveOAuthGrantTypes OAuthGrantType = { read=FOAuthGrantType, write=FSetOAuthGrantType };
enum TcsGoogleDriveOAuthGrantTypes { cogtAuthorizationCode=0, cogtImplicit=1, cogtPassword=2, cogtClientCredentials=3 };

Default Value

cogtAuthorizationCode

Remarks

The OAuth grant type used to acquire an OAuth access token. See the introduction section for more information. Possible values are:

0 (cogtAuthorizationCode - Default) Authorization Code grant type
1 (cogtImplicit) Implicit grant type
2 (cogtPassword) Resource Owner Password Credentials grant type
3 (cogtClientCredentials) Client Credentials grant type

This property is not available at design time.

Data Type

Integer

OAuthRefreshToken Property (GoogleDrive Component)

Specifies the refresh token received from or sent to the authorization server.

Syntax

__property String OAuthRefreshToken = { read=FOAuthRefreshToken, write=FSetOAuthRefreshToken };

Default Value

""

Remarks

Specifies the refresh token received from or sent to the authorization server. This property is set automatically if a refresh token is retrieved from the token server. If the OAuthAutomaticRefresh configuration setting is set to true, and the OAuthGrantType property is set to a grant that can use refresh tokens.

This property is not available at design time.

Data Type

String

OAuthReturnURL Property (GoogleDrive Component)

The URL where the user (browser) returns after authenticating.

Syntax

__property String OAuthReturnURL = { read=FOAuthReturnURL, write=FSetOAuthReturnURL };

Default Value

""

Remarks

The URL where the user (browser) returns after authenticating. This property is mapped to the redirect_uri parameter when making a request to the authorization server. Typically, this is automatically set by the component when using the embedded web server. If the OAuthWebServerPort or OAuthWebServerHost configuration settings is set, then this property should be set to match. If using the Web client profile, this should be set to the place where the authorization code will be parsed out of the response after the user finishes authorizing.

This property is not available at design time.

Data Type

String

OAuthServerAuthURL Property (GoogleDrive Component)

The URL of the authorization server.

Syntax

__property String OAuthServerAuthURL = { read=FOAuthServerAuthURL, write=FSetOAuthServerAuthURL };

Default Value

""

Remarks

The URL of the authorization server.

This property is not available at design time.

Data Type

String

OAuthServerTokenURL Property (GoogleDrive Component)

The URL of the token server used to obtain the access token.

Syntax

__property String OAuthServerTokenURL = { read=FOAuthServerTokenURL, write=FSetOAuthServerTokenURL };

Default Value

""

Remarks

The URL of the token server used to obtain the access token.

This property is not available at design time.

Data Type

String

OAuthWebAuthURL Property (GoogleDrive Component)

The URL to which the user should be re-directed for authorization.

Syntax

__property String OAuthWebAuthURL = { read=FOAuthWebAuthURL };

Default Value

""

Remarks

The URL to which the user should be re-directed for authorization. This field is used to get the URL that the user should be redirected to when using the Web client profile. See introduction section for more information.

This property is read-only and not available at design time.

Data Type

String

OtherHeaders Property (GoogleDrive Component)

This property includes other headers as determined by the user (optional).

Syntax

__property String OtherHeaders = { read=FOtherHeaders, write=FSetOtherHeaders };

Default Value

""

Remarks

This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like ContentType and From.

The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") .

Use this property with caution. If this property contains invalid headers, HTTP requests may fail.

This property is useful for extending the functionality of the component beyond what is provided.

This property is not available at design time.

Data Type

String

Overwrite Property (GoogleDrive Component)

Determines if local files are overwritten.

Syntax

__property bool Overwrite = { read=FOverwrite, write=FSetOverwrite };

Default Value

false

Remarks

This property controls whether local files are overwritten when calling DownloadFile. It is only applicable to local files. The default value is false.

Data Type

Boolean

ParsedHeaderCount Property (GoogleDrive Component)

The number of records in the ParsedHeader arrays.

Syntax

__property int ParsedHeaderCount = { read=FParsedHeaderCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at ParsedHeaderCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ParsedHeaderField Property (GoogleDrive Component)

This property contains the name of the HTTP header (this is the same case as it is delivered).

Syntax

__property String ParsedHeaderField[int ParsedHeaderIndex] = { read=FParsedHeaderField };

Default Value

""

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The ParsedHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ParsedHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

ParsedHeaderValue Property (GoogleDrive Component)

This property contains the header contents.

Syntax

__property String ParsedHeaderValue[int ParsedHeaderIndex] = { read=FParsedHeaderValue };

Default Value

""

Remarks

This property contains the Header contents.

The ParsedHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ParsedHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

PermissionMarker Property (GoogleDrive Component)

A marker when permissions are paged.

Syntax

__property String PermissionMarker = { read=FPermissionMarker, write=FSetPermissionMarker };

Default Value

""

Remarks

This property returns a marker used to iterate over pages of permissions; it's populated when ListPermissions is called if the results are paged.

Continue to call ListPermissions until this property returns empty string in order to list all permissions.

This property is not available at design time.

Data Type

String

PermissionCount Property (GoogleDrive Component)

The number of records in the Permission arrays.

Syntax

__property int PermissionCount = { read=FPermissionCount, write=FSetPermissionCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at PermissionCount - 1.

This property is not available at design time.

Data Type

Integer

PermissionAllowFileDiscovery Property (GoogleDrive Component)

Whether the permission allows the file or folder to be discovered through search.

Syntax

__property bool PermissionAllowFileDiscovery[int PermissionIndex] = { read=FPermissionAllowFileDiscovery, write=FSetPermissionAllowFileDiscovery };

Default Value

false

Remarks

Whether the permission allows the file or folder to be discovered through search.

This property indicates whether the permission allows the file or folder to which it applies to be discovered through search.

This property is only applicable if the permission's PermissionType is set to 2 (ptDomain) or 3 (ptAnyone).

The PermissionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PermissionCount property.

This property is not available at design time.

Data Type

Boolean

PermissionDomain Property (GoogleDrive Component)

The domain to which the permission applies.

Syntax

__property String PermissionDomain[int PermissionIndex] = { read=FPermissionDomain, write=FSetPermissionDomain };

Default Value

""

Remarks

The domain to which the permission applies.

This property is used to define the domain to which the permission applies when PermissionType is set to 2 (ptDomain).

The PermissionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PermissionCount property.

This property is not available at design time.

Data Type

String

PermissionEmail Property (GoogleDrive Component)

The user or group to which the permission applies.

Syntax

__property String PermissionEmail[int PermissionIndex] = { read=FPermissionEmail, write=FSetPermissionEmail };

Default Value

""

Remarks

The user or group to which the permission applies.

This property is used to define the user or group to which the permission applies when PermissionType is set to 0 (ptUser) or 1 (ptGroup).

The PermissionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PermissionCount property.

This property is not available at design time.

Data Type

String

PermissionId Property (GoogleDrive Component)

The Id of the permission.

Syntax

__property String PermissionId[int PermissionIndex] = { read=FPermissionId, write=FSetPermissionId };

Default Value

""

Remarks

The Id of the permission.

This property holds the Id of the permission.

The PermissionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PermissionCount property.

This property is not available at design time.

Data Type

String

PermissionModOp Property (GoogleDrive Component)

The operation to perform on the permission.

Syntax

__property TcsGoogleDrivePermissionModOps PermissionModOp[int PermissionIndex] = { read=FPermissionModOp, write=FSetPermissionModOp };
enum TcsGoogleDrivePermissionModOps { moNone=0, moCreate=1, moUpdate=2, moDelete=3 };

Default Value

moNone

Remarks

The operation to perform on the permission.

This property is used to specify the operation that the component should perform on the permission when UpdatePermissions is called. Valid values are:

moNone (0) (default) No-Op (the component skips the permission).
moCreate (1) The permission will be created.
moUpdate (2) The permission will be updated.
moDelete (3) The permission will be deleted.

Refer to UpdatePermissions for more information.

The PermissionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PermissionCount property.

This property is not available at design time.

Data Type

Integer

PermissionRole Property (GoogleDrive Component)

The role specified by the permission.

Syntax

__property TcsGoogleDrivePermissionRoles PermissionRole[int PermissionIndex] = { read=FPermissionRole, write=FSetPermissionRole };
enum TcsGoogleDrivePermissionRoles { prReader=0, prCommenter=1, prWriter=2, prOwner=3, prFileOrganizer=4, prOrganizer=5 };

Default Value

prReader

Remarks

The role specified by the permission.

This property defines the role specified by the permission. Possible values are:

prReader (0) (default) Read-only permissions.
prCommenter (1) Read-only plus commenting permissions.
prWriter (2) Read, write, and comment permissions.
prOwner (3) Full ownership (personal drives only).
prFileOrganizer (4) Writer permissions, plus the ability to move and trash resources (shared drives only).
prOrganizer (5) File organizer permissions, plus the ability to permanently delete resources from, and rename/delete/alter the membership of, a shared drive (shared drives only).

The PermissionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PermissionCount property.

This property is not available at design time.

Data Type

Integer

PermissionType Property (GoogleDrive Component)

The set of users to which the permission applies.

Syntax

__property TcsGoogleDrivePermissionTypes PermissionType[int PermissionIndex] = { read=FPermissionType, write=FSetPermissionType };
enum TcsGoogleDrivePermissionTypes { ptUser=0, ptGroup=1, ptDomain=2, ptAnyone=3 };

Default Value

ptUser

Remarks

The set of users to which the permission applies.

This property defines the set of users to which the permission role defined in PermissionRole applies.

The PermissionEmail and PermissionDomain properties are used to define the user, group, or domain to which the permission applies. The following table shows which property is associated with which permission type:

Value Description Related property
0 (ptUser - default) A single user. PermissionEmail
1 (ptGroup) A group. PermissionEmail
2 (ptDomain) A domain. PermissionDomain
3 (ptAnyone) Anyone, authenticated or not. N/A

The PermissionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PermissionCount property.

This property is not available at design time.

Data Type

Integer

ProxyAuthScheme Property (GoogleDrive Component)

This property is used to tell the component which type of authorization to perform when connecting to the proxy.

Syntax

__property TcsGoogleDriveProxyAuthSchemes ProxyAuthScheme = { read=FProxyAuthScheme, write=FSetProxyAuthScheme };
enum TcsGoogleDriveProxyAuthSchemes { authBasic=0, authDigest=1, authProprietary=2, authNone=3, authNtlm=4, authNegotiate=5 };

Default Value

authBasic

Remarks

This property is used to tell the component which type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the component will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the component. Look at the configuration file for the component being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (GoogleDrive Component)

This property tells the component whether or not to automatically detect and use proxy system settings, if available.

Syntax

__property bool ProxyAutoDetect = { read=FProxyAutoDetect, write=FSetProxyAutoDetect };

Default Value

False

Remarks

This property tells the component whether or not to automatically detect and use proxy system settings, if available. The default value is false.

Data Type

Boolean

ProxyPassword Property (GoogleDrive Component)

This property contains a password if authentication is to be used for the proxy.

Syntax

__property String ProxyPassword = { read=FProxyPassword, write=FSetProxyPassword };

Default Value

""

Remarks

This property contains a password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (GoogleDrive Component)

This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

__property int ProxyPort = { read=FProxyPort, write=FSetProxyPort };

Default Value

80

Remarks

This property contains the Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (GoogleDrive Component)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

__property String ProxyServer = { read=FProxyServer, write=FSetProxyServer };

Default Value

""

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (GoogleDrive Component)

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

__property TcsGoogleDriveProxySSLs ProxySSL = { read=FProxySSL, write=FSetProxySSL };
enum TcsGoogleDriveProxySSLs { psAutomatic=0, psAlways=1, psNever=2, psTunnel=3 };

Default Value

psAutomatic

Remarks

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

psAutomatic (0)Default setting. If the URL is an https URL, the component will use the psTunnel option. If the URL is an http URL, the component will use the psNever option.
psAlways (1)The connection is always SSL enabled.
psNever (2)The connection is not SSL enabled.
psTunnel (3)The connection is made through a tunneling (HTTP) proxy.

Data Type

Integer

ProxyUser Property (GoogleDrive Component)

This property contains a username if authentication is to be used for the proxy.

Syntax

__property String ProxyUser = { read=FProxyUser, write=FSetProxyUser };

Default Value

""

Remarks

This property contains a username if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

QueryParamCount Property (GoogleDrive Component)

The number of records in the QueryParam arrays.

Syntax

__property int QueryParamCount = { read=FQueryParamCount, write=FSetQueryParamCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at QueryParamCount - 1.

This property is not available at design time.

Data Type

Integer

QueryParamName Property (GoogleDrive Component)

The name of the query parameter.

Syntax

__property String QueryParamName[int QueryParamIndex] = { read=FQueryParamName, write=FSetQueryParamName };

Default Value

""

Remarks

The name of the query parameter.

This property specifies the name of the query parameter.

The QueryParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the QueryParamCount property.

This property is not available at design time.

Data Type

String

QueryParamValue Property (GoogleDrive Component)

The value of the query parameter.

Syntax

__property String QueryParamValue[int QueryParamIndex] = { read=FQueryParamValue, write=FSetQueryParamValue };

Default Value

""

Remarks

The value of the query parameter.

This property specifies the value of the query parameter. The component will automatically URL-encode this value when sending the request.

The QueryParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the QueryParamCount property.

This property is not available at design time.

Data Type

String

ResourceData Property (GoogleDrive Component)

The data that was downloaded, or that should be uploaded.

Syntax

__property String ResourceData = { read=FResourceData, write=FSetResourceData };
__property DynamicArray<Byte> ResourceDataB = { read=FResourceDataB, write=FSetResourceDataB };

Default Value

""

Remarks

This property is populated with file data after calling DownloadFile if LocalFile is not set.

This property can also be set before calling UploadFile; its data will be uploaded if LocalFile is not set.

This property is not available at design time.

Data Type

Byte Array

ResourceMarker Property (GoogleDrive Component)

A marker indicating what page of resources to return next.

Syntax

__property String ResourceMarker = { read=FResourceMarker, write=FSetResourceMarker };

Default Value

""

Remarks

This property will be populated when ListResources is called if the results are paged and there are more pages. To list all resources, continue to call ListResources until this property returns empty string.

Refer to ListResources for more information.

Note that resources are never paged when calling ListParents or GetResourceInfo.

This property is not available at design time.

Data Type

String

ResourceCount Property (GoogleDrive Component)

The number of records in the Resource arrays.

Syntax

__property int ResourceCount = { read=FResourceCount, write=FSetResourceCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at ResourceCount - 1.

This property is not available at design time.

Data Type

Integer

ResourceContentAccessible Property (GoogleDrive Component)

Whether the resource's content is accessible to less-privileged users.

Syntax

__property bool ResourceContentAccessible[int ResourceIndex] = { read=FResourceContentAccessible, write=FSetResourceContentAccessible };

Default Value

false

Remarks

Whether the resource's content is accessible to less-privileged users.

This property indicates whether the resource's content is accessible. If the resource is not accessible, it cannot be copied, downloaded, or printed by a users unless they have at least "writer" permissions.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is not available at design time.

Data Type

Boolean

ResourceCreatedTime Property (GoogleDrive Component)

The creation date of the resource.

Syntax

__property String ResourceCreatedTime[int ResourceIndex] = { read=FResourceCreatedTime, write=FSetResourceCreatedTime };

Default Value

""

Remarks

The creation date of the resource.

This property holds a DateTime string representing the creation date of the resource. This is a combined date-time value (formatted according to RFC 3339).

Note that while this property is writable, the component only uses it as input when UploadFile is called; it is ignored when calling UpdateResource.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is not available at design time.

Data Type

String

ResourceDescription Property (GoogleDrive Component)

A short description of the resource.

Syntax

__property String ResourceDescription[int ResourceIndex] = { read=FResourceDescription, write=FSetResourceDescription };

Default Value

""

Remarks

A short description of the resource.

This property specifies a short description of the resource.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is not available at design time.

Data Type

String

ResourceExtension Property (GoogleDrive Component)

The file extension of the resource.

Syntax

__property String ResourceExtension[int ResourceIndex] = { read=FResourceExtension };

Default Value

""

Remarks

The file extension of the resource.

This property indicates the file extension of the resource. It cannot be set, and is empty for folder resources. To specify the extension when creating a new file resource include it when calling UploadFile.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is read-only and not available at design time.

Data Type

String

ResourceId Property (GoogleDrive Component)

The Id of the resource.

Syntax

__property String ResourceId[int ResourceIndex] = { read=FResourceId, write=FSetResourceId };

Default Value

""

Remarks

The Id of the resource.

This property holds the Id of the resource.

This property must be set before calling UpdateResource.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is not available at design time.

Data Type

String

ResourceMD5Checksum Property (GoogleDrive Component)

The MD5 checksum of the file resource.

Syntax

__property String ResourceMD5Checksum[int ResourceIndex] = { read=FResourceMD5Checksum };

Default Value

""

Remarks

The MD5 checksum of the file resource.

This property holds the MD5 checksum of the resource, if it is a file resource.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is read-only and not available at design time.

Data Type

String

ResourceMIMEType Property (GoogleDrive Component)

The MIME type of the resource.

Syntax

__property String ResourceMIMEType[int ResourceIndex] = { read=FResourceMIMEType, write=FSetResourceMIMEType };

Default Value

""

Remarks

The MIME type of the resource.

This property specifies the MIME type of the resource.

When calling UploadFile, this property is ignored in favor of the MimeType parameter of UploadFile.

When calling UpdateResource, this property is only submitted if new file data is being uploaded.

Some Google Drive MIME types:

application/vnd.google-apps.audio
application/vnd.google-apps.document Google Docs
application/vnd.google-apps.drawing Google Drawing
application/vnd.google-apps.file Google Drive file
application/vnd.google-apps.folder Google Drive folder
application/vnd.google-apps.form Google Forms
application/vnd.google-apps.fusiontable Google Fusion Tables
application/vnd.google-apps.kix Google Docs
application/vnd.google-apps.photo
application/vnd.google-apps.presentation Google Slides
application/vnd.google-apps.script Google Apps Scripts
application/vnd.google-apps.sites Google Sites
application/vnd.google-apps.spreadsheet Google Sheets
application/vnd.google-apps.unknown
application/vnd.google-apps.video

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is not available at design time.

Data Type

String

ResourceModifiedTime Property (GoogleDrive Component)

The last modified date of the resource.

Syntax

__property String ResourceModifiedTime[int ResourceIndex] = { read=FResourceModifiedTime, write=FSetResourceModifiedTime };

Default Value

""

Remarks

The last modified date of the resource.

This property holds a DateTime string representing the last modified date of the resource. This is a combined date-time value (formatted according to RFC 3339).

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is not available at design time.

Data Type

String

ResourceName Property (GoogleDrive Component)

The name of the resource.

Syntax

__property String ResourceName[int ResourceIndex] = { read=FResourceName, write=FSetResourceName };

Default Value

""

Remarks

The name of the resource.

This property specifies the name of the resource.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is not available at design time.

Data Type

String

ResourceOriginalName Property (GoogleDrive Component)

The original name of the file resource.

Syntax

__property String ResourceOriginalName[int ResourceIndex] = { read=FResourceOriginalName };

Default Value

""

Remarks

The original name of the file resource.

This property specifies the original name of a file resource if the file was uploaded manually, or if the name was set programmatically through the API.

Updating ResourceName will not change this value.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is read-only and not available at design time.

Data Type

String

ResourceOwner Property (GoogleDrive Component)

The name of the resource's owner.

Syntax

__property String ResourceOwner[int ResourceIndex] = { read=FResourceOwner };

Default Value

""

Remarks

The name of the resource's owner.

This property holds the name of resource's owner.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is read-only and not available at design time.

Data Type

String

ResourceOwnerEmail Property (GoogleDrive Component)

The email address of the resource's owner.

Syntax

__property String ResourceOwnerEmail[int ResourceIndex] = { read=FResourceOwnerEmail };

Default Value

""

Remarks

The email address of the resource's owner.

This property holds the email address of the resource's owner.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is read-only and not available at design time.

Data Type

String

ResourceParentIds Property (GoogleDrive Component)

The Ids of the resource's parent folders.

Syntax

__property String ResourceParentIds[int ResourceIndex] = { read=FResourceParentIds, write=FSetResourceParentIds };

Default Value

""

Remarks

The Ids of the resource's parent folders.

This property holds a comma-separated list of Ids for the resource's parent folders.

Note that while this property is writable, the component only uses it as input when UploadFile is called. To modify a resource's parents in any other case, use the AddParents, RemoveParents, and MoveResource methods.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is not available at design time.

Data Type

String

ResourceSharedDriveId Property (GoogleDrive Component)

The Id of the shared drive the resource is in.

Syntax

__property String ResourceSharedDriveId[int ResourceIndex] = { read=FResourceSharedDriveId };

Default Value

""

Remarks

The Id of the shared drive the resource is in.

This property holds the Id of the shared drive that the resource is in, if applicable.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is read-only and not available at design time.

Data Type

String

ResourceSize Property (GoogleDrive Component)

The size of the file resource in bytes.

Syntax

__property __int64 ResourceSize[int ResourceIndex] = { read=FResourceSize };

Default Value

0

Remarks

The size of the file resource in bytes.

This property holds the size of a file resource in bytes. This is only applicable to files.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is read-only and not available at design time.

Data Type

Long64

ResourceStarred Property (GoogleDrive Component)

Whether the resource is starred.

Syntax

__property bool ResourceStarred[int ResourceIndex] = { read=FResourceStarred, write=FSetResourceStarred };

Default Value

false

Remarks

Whether the resource is starred.

This property indicates whether the resource is starred by the current user.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is not available at design time.

Data Type

Boolean

ResourceTrashed Property (GoogleDrive Component)

Whether the resource is in the trash.

Syntax

__property bool ResourceTrashed[int ResourceIndex] = { read=FResourceTrashed, write=FSetResourceTrashed };

Default Value

false

Remarks

Whether the resource is in the trash.

This property indicates whether the resource has been moved to trash.

Note that while this property is writable, the component only uses it as input when UpdateResource is called; it is ignored when calling UploadFile.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is not available at design time.

Data Type

Boolean

ResourceType Property (GoogleDrive Component)

The resource's type.

Syntax

__property TcsGoogleDriveResourceTypes ResourceType[int ResourceIndex] = { read=FResourceType };
enum TcsGoogleDriveResourceTypes { gdrtFile=0, gdrtFolder=1 };

Default Value

gdrtFile

Remarks

The resource's type.

This property indicates whether the resource is a folder or a file. Possible values are:

0 (gdrtFile) A file.
1 (gdrtFolder) A folder.
2 (gdrtRevision) A revision.

Google treats files and folders in the same way, and folders are included when listing resources. The ResourceType property can be used to determine if a resource is a folder, a file, or a revision of a file.

To list, delete, and update folders use the ListResources, DeleteResource, and UpdateResource methods.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is read-only and not available at design time.

Data Type

Integer

ResourceViewed Property (GoogleDrive Component)

Whether the resource has been viewed.

Syntax

__property bool ResourceViewed[int ResourceIndex] = { read=FResourceViewed };

Default Value

false

Remarks

Whether the resource has been viewed.

This property indicates whether the resource has been viewed by the current user.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ResourceViewLink Property (GoogleDrive Component)

A link for opening the resource in a relevant Google editor or viewer in a browser.

Syntax

__property String ResourceViewLink[int ResourceIndex] = { read=FResourceViewLink };

Default Value

""

Remarks

A link for opening the resource in a relevant Google editor or viewer in a browser.

This property holds the link to the resource. The link may be used to view the resource in a browser or relevant editor.

The ResourceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ResourceCount property.

This property is read-only and not available at design time.

Data Type

String

ResumeURL Property (GoogleDrive Component)

The resumable upload URL.

Syntax

__property String ResumeURL = { read=FResumeURL, write=FSetResumeURL };

Default Value

""

Remarks

This property holds the URL of the resumable upload session. This is populated by the component automatically when UseResumableUpload is set to true and UploadFile is called to initiate a new upload.

This must be set in order to resume an interrupted upload. See UploadFile for details.

This property is not available at design time.

Data Type

String

SharedDrive Property (GoogleDrive Component)

The shared drive to list file and folder resources for.

Syntax

__property String SharedDrive = { read=FSharedDrive, write=FSetSharedDrive };

Default Value

""

Remarks

When ListResourcesScope is set to lrsSharedDrive (2), this property must be set to a shared drive resource Id before calling ListResources or ListChildren.

This property may also be set to a shared drive resource Id before calling GetCurrentChangeMarker or ListChanges in order to list changes to the specified shared drive and its contents.

Refer to ListResources or ListChanges for more information.

This property is not available at design time.

Data Type

String

SharedDriveMarker Property (GoogleDrive Component)

A marker when shared drives are paged.

Syntax

__property String SharedDriveMarker = { read=FSharedDriveMarker, write=FSetSharedDriveMarker };

Default Value

""

Remarks

This property returns a marker used to iterate over pages of shared drives; it's populated when ListSharedDrives is called if the results are paged.

Continue to call ListSharedDrives until this property returns empty string in order to list all shared drives.

This property is not available at design time.

Data Type

String

SharedDriveCount Property (GoogleDrive Component)

The number of records in the SharedDrive arrays.

Syntax

__property int SharedDriveCount = { read=FSharedDriveCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at SharedDriveCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SharedDriveCapabilities Property (GoogleDrive Component)

The capabilities that the current user has for the shared drive.

Syntax

__property int SharedDriveCapabilities[int SharedDriveIndex] = { read=FSharedDriveCapabilities };

Default Value

0

Remarks

The capabilities that the current user has for the shared drive.

This property describes the effective capabilities that the current user has for the shared drive. The value is a bit field comprised of one or more of the following, OR'ed together:

Hex Value Description
0x00001 User can add children to the shared drive's folders.
0x00002 User can change the shared drive's copyRequiresWriterPermission restriction.
0x00004 User can change the shared drive's domainUsersOnly restriction.
0x00008 User can change the shared drive's background image.
0x00010 User can change the shared drive's driveMembersOnly restriction.
0x00020 User can comment on the shared drive's files.
0x00040 User can copy files in the shared drive.
0x00080 User can permanently delete children from the shared drive's folders.
0x00100 User can delete the shared drive.
0x00200 User can download the shared drive's files.
0x00400 User can edit the shared drive's files.
0x00800 User can list children of folders in the shared drive.
0x01000 User can add, remove, and update shared drive members.
0x02000 User can read revisions of the shared drive's files.
0x04000 User can rename the shared drive's files and folders.
0x08000 User can rename the shared drive.
0x10000 User can share the shared drive's files and folders.
0x20000 User can trash children from the shared drive's folders.

The SharedDriveIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SharedDriveCount property.

This property is read-only and not available at design time.

Data Type

Integer

SharedDriveCreatedTime Property (GoogleDrive Component)

The creation date of the shared drive.

Syntax

__property String SharedDriveCreatedTime[int SharedDriveIndex] = { read=FSharedDriveCreatedTime };

Default Value

""

Remarks

The creation date of the shared drive.

This property holds a DateTime string representing the creation date of the shared drive. This is a combined date-time value (formatted according to RFC 3339).

The SharedDriveIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SharedDriveCount property.

This property is read-only and not available at design time.

Data Type

String

SharedDriveHidden Property (GoogleDrive Component)

Whether the shared drive is hidden from default view.

Syntax

__property bool SharedDriveHidden[int SharedDriveIndex] = { read=FSharedDriveHidden };

Default Value

false

Remarks

Whether the shared drive is hidden from default view.

This property specifies whether the shared drive is hidden from default view. To hide or unhide a shared drive, call the ToggleSharedDriveHidden method.

If a shared drive is hidden, it will not show up in the Google Drive UI by default (but is still otherwise accessible). Google Drive tracks this setting separately for each user; i.e., each member of a shared drive can choose whether the shared drive should be hidden or not.

The SharedDriveIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SharedDriveCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SharedDriveId Property (GoogleDrive Component)

The Id of the shared drive.

Syntax

__property String SharedDriveId[int SharedDriveIndex] = { read=FSharedDriveId };

Default Value

""

Remarks

The Id of the shared drive.

This property holds the Id of the shared drive.

The SharedDriveIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SharedDriveCount property.

This property is read-only and not available at design time.

Data Type

String

SharedDriveName Property (GoogleDrive Component)

The name of the shared drive.

Syntax

__property String SharedDriveName[int SharedDriveIndex] = { read=FSharedDriveName };

Default Value

""

Remarks

The name of the shared drive.

This property reflects the name of the shared drive.

The UpdateSharedDrive method can be used to rename the shared drive if the current user is allowed to do so (i.e., if the SharedDriveCapabilities property has the 0x08000 flag set).

The SharedDriveIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SharedDriveCount property.

This property is read-only and not available at design time.

Data Type

String

SharedDriveRestrictions Property (GoogleDrive Component)

The restrictions that apply to the shared drive.

Syntax

__property int SharedDriveRestrictions[int SharedDriveIndex] = { read=FSharedDriveRestrictions };

Default Value

0

Remarks

The restrictions that apply to the shared drive.

This property specifies the restrictions that apply to the shared drive. The value is a bitmask comprised of one or more of the following, OR'ed together:

Hex Value Description
0x0001 Administrative privileges on the shared drive are required to modify restrictions.
0x0002 Readers and commenters cannot copy, print, or download files in the shared drive.
0x0004 Access to the shared drive, and its contents, is restricted to users in its domain.
0x0008 Access to items in the shared drive is restricted to its members.

The UpdateSharedDrive method can be used to change any of the shared drive's restrictions that the current user is allowed to alter (indicated by the presence of the 0x00002, 0x00004, and/or 0x00010 flags in the SharedDriveCapabilities property).

The SharedDriveIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SharedDriveCount property.

This property is read-only and not available at design time.

Data Type

Integer

SSLAcceptServerCertEncoded Property (GoogleDrive Component)

This is the certificate (PEM/Base64 encoded).

Syntax

__property String SSLAcceptServerCertEncoded = { read=FSSLAcceptServerCertEncoded, write=FSetSSLAcceptServerCertEncoded };
__property DynamicArray<Byte> SSLAcceptServerCertEncodedB = { read=FSSLAcceptServerCertEncodedB, write=FSetSSLAcceptServerCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertEncoded Property (GoogleDrive Component)

This is the certificate (PEM/Base64 encoded).

Syntax

__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded };
__property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertStore Property (GoogleDrive Component)

This is the name of the certificate store for the client certificate.

Syntax

__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore };
__property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SSLCertStorePassword Property (GoogleDrive Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (GoogleDrive Component)

This is the type of certificate store for this certificate.

Syntax

__property TcsGoogleDriveSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };
enum TcsGoogleDriveSSLCertStoreTypes { cstUser=0, cstMachine=1, cstPFXFile=2, cstPFXBlob=3, cstJKSFile=4, cstJKSBlob=5, cstPEMKeyFile=6, cstPEMKeyBlob=7, cstPublicKeyFile=8, cstPublicKeyBlob=9, cstSSHPublicKeyBlob=10, cstP7BFile=11, cstP7BBlob=12, cstSSHPublicKeyFile=13, cstPPKFile=14, cstPPKBlob=15, cstXMLFile=16, cstXMLBlob=17, cstJWKFile=18, cstJWKBlob=19, cstSecurityKey=20, cstBCFKSFile=21, cstBCFKSBlob=22, cstPKCS11=23, cstAuto=99 };

Default Value

cstUser

Remarks

This is the type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user.

Note: This store type is not available in Java.

1 (cstMachine)For Windows, this specifies that the certificate store is a machine store.

Note: This store type is not available in Java.

2 (cstPFXFile)The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates.

Note: This store type is only available in Java.

5 (cstJKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.

Note: this store type is only available in Java.

6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).

Note: This store type is only available in Java and .NET.

22 (cstBCFKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.

Note: This store type is only available in Java and .NET.

23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS#11 interface.

To use a security key, the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the SSLCertStore and set SSLCertStorePassword to the PIN.

Code Example. SSH Authentication with Security Key: certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Data Type

Integer

SSLCertSubject Property (GoogleDrive Component)

This is the subject of the certificate used for client authentication.

Syntax

__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

FieldMeaning
CNCommon Name. This is commonly a hostname like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma, it must be quoted.

Data Type

String

SSLProvider Property (GoogleDrive Component)

This specifies the SSL/TLS implementation to use.

Syntax

__property TcsGoogleDriveSSLProviders SSLProvider = { read=FSSLProvider, write=FSetSSLProvider };
enum TcsGoogleDriveSSLProviders { sslpAutomatic=0, sslpPlatform=1, sslpInternal=2 };

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

0 (sslpAutomatic - default)Automatically selects the appropriate implementation.
1 (sslpPlatform) Uses the platform/system implementation.
2 (sslpInternal) Uses the internal implementation.
Additional Notes

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.

Data Type

Integer

SSLServerCertEncoded Property (GoogleDrive Component)

This is the certificate (PEM/Base64 encoded).

Syntax

__property String SSLServerCertEncoded = { read=FSSLServerCertEncoded };
__property DynamicArray<Byte> SSLServerCertEncodedB = { read=FSSLServerCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Byte Array

StartByte Property (GoogleDrive Component)

The byte offset from which to start the upload or download.

Syntax

__property __int64 StartByte = { read=FStartByte, write=FSetStartByte };

Default Value

0

Remarks

This property may be set to resume an upload or download; it specifies the offset in the file from which to resume. See UploadFile and DownloadFile for details about resuming uploads and downloads.

This property is not available at design time.

Data Type

Long64

Timeout Property (GoogleDrive Component)

A timeout for the component.

Syntax

__property int Timeout = { read=FTimeout, write=FSetTimeout };

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the component will wait for the operation to complete before returning control.

The component will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the component raises an exception.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

UseResumableUpload Property (GoogleDrive Component)

Whether to use resumable uploads.

Syntax

__property bool UseResumableUpload = { read=FUseResumableUpload, write=FSetUseResumableUpload };

Default Value

false

Remarks

This property controls whether simple or resumable uploads are used when UploadFile is called. The default value is false (simple uploads are used).

Refer to UploadFile for more information.

This property is not available at design time.

Data Type

Boolean

AddParents Method (GoogleDrive Component)

Adds folders to the list of parents for a file or folder.

Syntax

void __fastcall AddParents(String ResourceId, String ParentIds);

Remarks

This method adds one or more folders, specified by ParentIds, to the list of parents for the file or folder specified by ResourceId.

ParentIds should be specified as a comma-separated list of one or more resource Ids.

Note that resources within a shared drive must always have exactly one parent, and that only shared drive members with the "file organizer" or "organizer" roles can move files and folders within a shared drive.

AddQueryParam Method (GoogleDrive Component)

Adds a query parameter to the QueryParams properties.

Syntax

void __fastcall AddQueryParam(String Name, String Value);

Remarks

This method is used to add a query parameter to the QueryaParam* properties. Name specifies the name of the parameter, and Value specifies the value of the parameter.

All specified Values will be URL encoded by the component automatically. Consult the service documentation for details on the available parameters.

AddSharedDriveMember Method (GoogleDrive Component)

Creates a new shared drive member.

Syntax

String __fastcall AddSharedDriveMember(String SharedDriveId, int Role, int PermissionType, String Email);

Remarks

This is a convenience method that adds a new member to the shared drive specified by SharedDriveId by creating a permission on that shared drive. The Id of the newly-created permission is returned.

Role specifies the member's role. Valid values are:

prReader (0) Read-only permissions.
prCommenter (1) Read-only plus commenting permissions.
prWriter (2) Read, write, and comment permissions.
prFileOrganizer (4) Writer permissions, plus the ability to move and trash resources.
prOrganizer (5) File organizer permissions, plus the ability to permanently delete resources from, and rename/delete/alter the membership of, a shared drive.

PermissionType must be one of:

  • 0 (ptUser) - A single user.
  • 1 (ptGroup) - A group.

Email specifies the email address of the user or the group.

Refer to UpdatePermissions for more information about how permissions work in general, how permissions relate to shared drive members, and how to manipulate multiple members at once. string sharedDriveId = "20983euijdsds"; // First, we'll add a new member to the shared drive. The two integer parameters signify: // * The role type. 2 is the "Writer" role, which provides read and write (but not organize) permissions. // * The permission type. 0 means this is a single user (versus a group). // The Id of the new permission we've created on the shared drive--which is what actually causes the user to // be a member of the shared drive--is returned. string permId = googledrive.AddSharedDriveMember(sharedDriveId, 2, 0, "fakeuser@example.com"); // At some point later, perhaps this user has abused their privileges and we wish to revoke their writer // permissions. We change their role to "Commenter", which provides reader and commenting permissions. googledrive.UpdateSharedDriveMember(sharedDriveId, permId, 1); // 1 is the "Commenter" role. // Or perhaps we wish to simply remove the user's shared drive membership completely. googledrive.RemoveSharedDriveMember(sharedDriveId, permId);

Authorize Method (GoogleDrive Component)

Get the authorization string required to access the protected resource.

Syntax

void __fastcall Authorize();

Remarks

This method is used to get an access token that is required to access the protected resource. The method will act differently based on what is set in the OAuthClientProfile property and the OAuthGrantType property. This method is not to be used in conjunction with the Authorization property. It should instead be used when setting the OAuth* properties.

For more information, see the introduction section.

CalcAuthorization Method (GoogleDrive Component)

Calculates the Authorization header based on provided credentials.

Syntax

void __fastcall CalcAuthorization();

Remarks

This method calculates the Authorization value using the values provided in AuthScheme, User and Password.

In most cases this method does not need to be called. The component will automatically calculate any required authorization values when a method is called such as Get or Post.

This method may be useful in cases where the Authorization value needs to be calculated prior to sending a request.

Config Method (GoogleDrive Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CopyResource Method (GoogleDrive Component)

Copies a file.

Syntax

String __fastcall CopyResource(String ResourceId, String NewName, String ParentIds);

Remarks

This method copies the file identified by ResourceId and returns the Id of the newly created copy.

The NewName parameter defines the name of the copied file.

The ParentIds parameter should be a comma-separated list of existing folder Ids to use as parents for the copied file. If left blank, the copied file will inherit the same parents of the original.

CreateFolder Method (GoogleDrive Component)

Creates a new folder.

Syntax

String __fastcall CreateFolder(String Name, String ParentIds);

Remarks

This method creates a new folder with the specified Name and returns its Id. ParentIds can be a list of existing folder Ids to use as parents for the new folder, or empty string to create the folder at the root of the drive.

If the IncludeFolderProperties configuration setting is true when this method is called, the component will include the metadata held by the first item in the Resource* properties when creating the folder. (Note that the Name and ParentIds passed to this method will take precedence.)

Google treats files and folders in the same way, and folders are included when listing resources. The ResourceType property can be used to determine if a resource is a folder, a file, or a revision of a file.

To list, delete, and update folders use the ListResources, DeleteResource, and UpdateResource methods.

CreateSharedDrive Method (GoogleDrive Component)

Creates a new shared drive.

Syntax

String __fastcall CreateSharedDrive(String Name, String RequestId);

Remarks

This method creates a new shared drive and returns the newly-created shared drive's Id.

Name is the name of the new shared drive.

RequestId is a unique value used by the server to identify an idempotent request by the current user to create a shared drive. (That is, the server ensures that duplicate shared drives are not created if any given user makes repeated shared drive creation requests with the same Name and RequestId.)

DeleteResource Method (GoogleDrive Component)

Deletes the specified file or folder permanently.

Syntax

void __fastcall DeleteResource(String ResourceId);

Remarks

This method deletes the file or folder specified by ResourceId permanently.

Files and folders are not moved to the trash, they are deleted permanently. You can use TrashResource to move files or folders to the trash.

DeleteSharedDrive Method (GoogleDrive Component)

Deletes a shared drive.

Syntax

void __fastcall DeleteSharedDrive(String SharedDriveId);

Remarks

This method deletes the shared drive specified by SharedDriveId.

Note that only members of a shared drive with the prOrganizer (5) role can delete it, and that the shared drive must be empty (or all of its items must be in the trash).

DownloadFile Method (GoogleDrive Component)

Downloads, and optionally converts, a file.

Syntax

void __fastcall DownloadFile(String ResourceId, String MimeType);

Remarks

This method downloads the file specified by ResourceId.

If LocalFile is set, the file will be saved to the specified location; otherwise, the file data will be held by ResourceData.

If the empty string is passed for MimeType, the file will be downloaded as-is. If the file is in one of the Google formats shown in the table below, one of the MIME types shown in the third column can be passed for MimeType instead to convert the file before downloading it.

Google FormatDownload Format MIME Type
Google Docs HTML text/html
Plain text text/plain
Rich text application/rtf
Open Office document application/vnd.oasis.opendocument.text
PDF application/pdf
MS Word application/vnd.openxmlformats-officedocument.wordprocessingml.document
Google Sheets MS Excel application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
Open Office sheet application/x-vnd.oasis.opendocument.spreadsheet
PDF application/pdf
CSV (first sheet only) text/csv
Google Drawing JPEG image/jpeg
PNG image/png
SVG image/svg+xml
PDF image/pdf
Google Slides MS Powerpoint application/vnd.openxmlformats-officedocument.presentationml.presentation
PDF application/pdf
Plain text text/plain
Google App Scripts JSON application/vnd.google-apps.script+json

Download Notes

Downloading an Encrypted File

To decrypt an encrypted file set EncryptionAlgorithm and EncryptionPassword before calling this method. googledrive.LocalFile = "../MyFile.zip"; googledrive.DownloadFile(googledrive.Resources[0].Id, "");

Resuming Downloads

The component also supports resuming failed downloads by using the StartByte property. If a download is interrupted, set StartByte to the appropriate offset before calling this method to resume the download. string downloadFile = "../MyFile.zip"; googledrive.LocalFile = downloadFile; googledrive.DownloadFile(googledrive.Resources[0].Id, ""); //The transfer is interrupted and DownloadFile() above fails. Later, resume the download: //Get the size of the partially downloaded file googledrive.StartByte = new FileInfo(downloadFile).Length; googledrive.DownloadFile(googledrive.Resources[0].Id, "");

Resuming Encrypted File Downloads

Resuming encrypted file downloads is only supported when LocalFile was set in the initial download attempt.

If LocalFile is set when beginning an encrypted download, the component creates a temporary file in TempPath to hold the encrypted data until the download is complete. If the download is interrupted, DownloadTempFile will be populated with the path of the temporary file that holds the partial data.

To resume, DownloadTempFile must be populated, along with StartByte, to allow the remainder of the encrypted data to be downloaded. Once the encrypted data is downloaded it will be decrypted and written to LocalFile. googledrive.LocalFile = "../MyFile.zip"; googledrive.EncryptionPassword = "password"; googledrive.DownloadFile(googledrive.Resource[0].Id, ""); //The transfer is interrupted and DownloadFile() above fails. Later, resume the download: //Get the size of the partially download temp file googledrive.StartByte = new FileInfo(googledrive.Config("DownloadTempFile")).Length; googledrive.DownloadFile(googledrive.Resource[0].Id, "");

EmptyTrash Method (GoogleDrive Component)

Permanently deletes all of the current user's trashed files.

Syntax

void __fastcall EmptyTrash();

Remarks

This method permanently deletes all of the current user's trashed files by emptying the trash for their "My Drive".

It is not possible to recover trashed files after this method is called!

GetAccountInfo Method (GoogleDrive Component)

Gets information about the current user's account and space usage.

Syntax

void __fastcall GetAccountInfo();

Remarks

This method gets information about the current user's account and space usage, populating the Account* properties.

GetCurrentChangeMarker Method (GoogleDrive Component)

Gets the most current change marker.

Syntax

void __fastcall GetCurrentChangeMarker();

Remarks

This method populates NextChangeMarker with the most current change marker available.

Refer to ListChanges for more information.

If SharedDrive is set, this method will get the most current change marker available for that shared drive's changes.

GetPermissionInfo Method (GoogleDrive Component)

Gets information about a specific permission.

Syntax

void __fastcall GetPermissionInfo(String ResourceId, String PermissionId);

Remarks

This method retrieves information about the permission specified by PermissionId on the file, folder, or shared drive specified by ResourceId.

Calling this method will fire the PermissionList event, and will populate the Permission* properties (clearing any previously-held items in the process).

Shared Drive Members

Refer to UpdatePermissions for more information about how permissions work in general, how permissions relate to shared drive members, and how to manipulate multiple members at once.

GetResourceInfo Method (GoogleDrive Component)

Gets information about specific files and folders.

Syntax

void __fastcall GetResourceInfo(String ResourceIds);

Remarks

This method retrieves information about the file and folder resources specified by ResourceIds (which should be specified as a comma-separated list of resource Ids).

Calling this method will fire the ResourceList event once for each resource, and will populate the Resource* properties (clearing any previously-held items in the process).

Note that, unlike the ListResources and ListChildren methods, this method uses the resource Ids to retrieve information directly. This means that it does not support paged results or complex search queries (the "q" query parameter), does not need to know whether the resources are in shared drives, etc.

GetSharedDriveInfo Method (GoogleDrive Component)

Gets information about a specific shared drive.

Syntax

void __fastcall GetSharedDriveInfo(String SharedDriveId);

Remarks

This method retrieves information about the shared drive specified by SharedDriveId.

Calling this method will fire the SharedDriveList event, and will populate the SharedDrive* properties (clearing any previously-held items in the process).

GetUploadStatus Method (GoogleDrive Component)

Gets the status of a resumable upload session.

Syntax

void __fastcall GetUploadStatus();

Remarks

This method gets the status of a resumable upload session. Set ResumeURL before calling this method. After calling this method StartByte will be populated.

Interrupt Method (GoogleDrive Component)

Interrupt the current method.

Syntax

void __fastcall Interrupt();

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ListChanges Method (GoogleDrive Component)

Lists changes to resources and shared drives.

Syntax

void __fastcall ListChanges();

Remarks

This method lists changes to resources and shared drives.

General Usage

When this method is called, it will use the change marker stored in either ChangeMarker or NextChangeMarker (only one can be populated at a time) to request the next page of changes. This method causes the ChangeList event to fire once for each change, and will also populate the Change* properties.

If there are still more changes available to list when this method returns, the ChangeMarker property will be populated. Continue to call this method until ChangeMarker is empty to accumulate all pages of results in the Change* properties. (Once there aren't any more changes available to list, the NextChangeMarker property will be populated instead.)

Calling GetCurrentChangeMarker will immediately populate NextChangeMarker. Regardless of whether it is populated because of a call to GetCurrentChangeMarker or to ListChanges, NextChangeMarker is always populated with a value that (at the time of population) points to the most current state. (Since "the most current state" implies that there are no further changes to list, calling ListChanges immediately after NextChangeMarker is populated will not return any further changes.)

Setting ChangeMarker to "1" will cause ListChanges to list changes beginning with the very first change available.

Example of Listing Changes // Start listing changes from the beginning, and list a maximum of 10 changes at a time. googledrive.ChangeMarker = "1"; googledrive.Config("MaxResults=10"); // List changes once. googledrive.ListChanges(); do { for (int i = 0; i < googledrive.Changes.Count; i++) { Console.WriteLine(googledrive.Changes[i].ResourceId); Console.WriteLine(googledrive.Changes[i].Time); Console.WriteLine(googledrive.Changes[i].Removed); } // Continue to call ListChanges() until ChangeMarker is the empty string (indicating there // are no more changes to list). googledrive.ListChanges(); } while (googledrive.ChangeMarker.Length > 0); // Now NextChangeMarker will be populated. If we were to call ListChanges() again right now, // nothing would be listed and NextChangeMarker would still be populated. // Wait 2 minutes and then try to list changes again. Thread.Sleep(120000); googledrive.ListChanges(); do { for (int i = 0; i < googledrive.Changes.Count; i++) { Console.WriteLine(googledrive.Changes[i].ResourceId); Console.WriteLine(googledrive.Changes[i].Time); Console.WriteLine(googledrive.Changes[i].Removed); } googledrive.ListChanges(); } while (googledrive.ChangeMarker.Length > 0);

Shared Drive Functionality

When working in the context of shared drives, there are additional properties that can be configured to specify what kinds of changes should returned.

If SharedDrive is empty string, then changes for items in shared drives that the user has accessed will be included (in addition to the usual changes for the user's items). Changes to the shared drives themselves which the user is a member of will also be included.

If SharedDrive is populated with a shared drive resource Id, then only changes to items within that shared drive, as well as changes to that shared drive itself, will be returned.

A change's ChangeType will reflect whether it is associated with a file or folder (0), or a shared drive itself (1).

ListChildren Method (GoogleDrive Component)

Lists the child resources of one or more folders.

Syntax

void __fastcall ListChildren(String FolderIds);

Remarks

This is a convenience method that works the same way as ListResources, but limits the results to children of one or more folders specified by FolderIds (which should be specified as a comma-separated list of folder resource Ids).

Calling this method will fire the ResourceList event once for each resource, and will also populate the Child* properties.

If there are still more child resources available to list when this method returns, the ChildMarker property will be populated. Continue to call this method until ChildMarker is empty to accumulate all pages of results in the Child* properties.

Note that the string "root" may be used as a folder Id to represent the root folder of a drive.

Refer to ListResources for more information about how listing resources works in general, everything there applies to this method too. // ResourceList event handler. googledrive.OnResourceList += (s, e) => { Console.WriteLine(e.Name); }; // List all of the children of the given folder resource. do { googledrive.ListChildren("12978eyuihusd"); for (int i = 0; i < googledrive.Children.Count; i++) { // Process child resources here. } } while (!string.IsNullOrEmpty(googledrive.ChildMarker));

ListParents Method (GoogleDrive Component)

Lists the parent folders of a file or folder.

Syntax

void __fastcall ListParents(String ResourceId);

Remarks

This is a convenience method that simply retrieves the parent Ids of the file or folder specified by ResourceId and passes them to GetResourceInfo.

Refer to GetResourceInfo for more information.

ListPermissions Method (GoogleDrive Component)

Lists the permissions for a file, folder, or shared drive.

Syntax

void __fastcall ListPermissions(String ResourceId);

Remarks

This method is used to list permissions for the file, folder, or shared drive specified by ResourceId.

Calling this method will fire the PermissionList event once for each permission, and will also populate the Permission* properties.

If there are still more permissions available to list when this method returns, the PermissionMarker property will be populated. Continue to call this method until PermissionMarker is empty to accumulate all pages of results in the Permission* properties. // PermissionList event handler. googledrive.OnPermissionList += (s, e) => { Console.WriteLine("Permission Id: " + e.Id); }; // List all of the permissions on the given resource. do { googledrive.ListPermissions("fdjhskdf89o3wi"); for (int i = 0; i < googledrive.Permissions.Count; i++) { // Process permissions here. } } while (!string.IsNullOrEmpty(googledrive.PermissionMarker));

Shared Drive Members

Refer to UpdatePermissions for more information about how permissions work in general, how permissions relate to shared drive members, and how to manipulate multiple members at once.

Shared Drive Capabilities

To determine the effective capabilities the current user has for shared drives that they're a member of, call ListSharedDrives instead and inspect the SharedDriveCapabilities property of the returned items.

ListResources Method (GoogleDrive Component)

Lists files and folders.

Syntax

void __fastcall ListResources();

Remarks

This method is used to list file and folders. Calling this method will fire the ResourceList event once for each resource, and will also populate the Resource* properties.

If there are still more resources available to list when this method returns, the ResourceMarker property will be populated. Continue to call this method until ResourceMarker is empty to accumulate all pages of results in the Resource* properties.

Listing Resources

By default, all files and folders in the scope specified by the ListResourcesScope property will be returned. The ListResourcesMode configuration setting can be used to specify that only files or only folders should be returned. Refer to the "Result Scopes" section, below, for more information about what the results for each scope are comprised of.

To simply list the children or parents of specific resources, use ListChildren or ListParents. To retrieve information about specific resources, use GetResourceInfo.

For more complex queries, refer to the Google Drive API documentation for information on how to construct a search query, then use the AddQueryParam method to add a query parameter named "q" to the QueryParam* properties before calling this method.

Result Scopes

There are a number of different search scopes which the results of this method can be drawn from, some of which are exclusive to shared drives.

When ListResources is called with ListResourcesScope set to the default of lrsUser (0), the results will consist of items that are in the current user's "My Drive" and "Shared with me" spaces.

If ListResourcesScope is set to lrsDomain (1), the results will instead consist of items which have been shared to the current user's domain, whether or not the user has actually accessed them.

(To clarify, items shared to a user's domain are only added to their "Shared with me" space once the user accesses them for the first time. So, items shared to a user's domain that they have not actually accessed before would not show up when ListResourcesScope is set to lrsUser (0), but would show up when it is set to lrsDomain (1).)

When ListResourcesScope is set to lrsSharedDrive (2), the SharedDrive property must be set to the resource Id of a shared drive, and the results of this method will consist only of items within that shared drive.

When ListResourcesScope is set to lrsAllDrives (3), the results will consist of anything in the user's "My Drive" and "Shared with me" spaces, and all items in all shared drives which the user is a member of.

Note: Under some circumstances, if a user is a member of many shared drives, using the lrsAllDrives (3) will not yield a complete set of results (even with paged results). This is a direct limitation of the Google Drive API, and the only solution is to use a narrower scope. When using the lrsAllDrives (3) scope, you should check the SearchIncomplete configuration setting after calling ListResources; it will return "True" if the result set is incomplete.

How Shared Drives Work

Shared drives are, more than anything else, very similar to a normal user account. Once this is understood, it becomes much easier to understand how shared drives fit into the overall Google Drive architecture.

Just like a real user, a shared drive itself owns the files in its storage space (this is why the permissions for members of a shared drive use the "file organizer" and "organizer" roles instead of the "owner" role). Also like a real user, a shared drive's files can be explicitly shared with other users (even if they aren't members of the shared drive), and with the overall domain.

The difference, of course, is that a shared drive has a defined set of members, all of which have access to everything in the shared drive (though with varying capabilities). Refer to UpdatePermissions, AddSharedDriveMember, UpdateSharedDriveMember, and RemoveSharedDriveMember for more information. // ResourceList event handler. googledrive.OnResourceList += (s, e) => { Console.WriteLine(e.Name); }; // List all of the current user's resources. googledrive.ListResourcesScope = GoogledriveListResourcesScopes.lrsUser; do { googledrive.ListResources(); for (int i = 0; i < googledrive.Resources.Count; i++) { // Process resources here. } } while (!string.IsNullOrEmpty(googledrive.ResourceMarker)); // List all of the resources in the specified shared drive. googledrive.SharedDrive = "wfsr789vusijfv"; googledrive.ListResourcesScope = GoogledriveListResourcesScopes.lrsSharedDrive; do { googledrive.ListResources(); for (int i = 0; i < googledrive.Resources.Count; i++) { // Process resources here. } } while (!string.IsNullOrEmpty(googledrive.ResourceMarker));

ListRevisions Method (GoogleDrive Component)

List the revisions of a file.

Syntax

void __fastcall ListRevisions(String FileId);

Remarks

This method will list the revisions of the specified file. Calling this method will fire the ResourceList event once for each revision, and will also populate the Resource* properties. The Revision ID will be help in the ResourceId property.

If the Revision ID is set to the RevisionId configuration setting, the following methods can be used to interact with the specific revision:

After these methods are no longer needed, it is recommended to clear to the RevisionId configuration setting to avoid unattended changes to functionality.

ListSharedDrives Method (GoogleDrive Component)

Lists shared drives that the current user is a member of.

Syntax

void __fastcall ListSharedDrives();

Remarks

This method lists the shared drives which the current user is a member of.

Calling this method will fire the SharedDriveList event once for each shared drive, and will also populate the SharedDrive* properties.

If there are still more shared drives available to list when this method returns, the SharedDriveMarker property will be populated. Continue to call this method until SharedDriveMarker is empty to accumulate all pages of results in the SharedDrive* properties. // SharedDriveList event handler. googledrive.OnSharedDriveList += (s, e) => { Console.WriteLine(e.Name); }; // List all shared drives the current user is a member of. do { googledrive.ListSharedDrives(); for (int i = 0; i < googledrive.SharedDrives.Count; i++) { // Process shared drives here. } } while (!string.IsNullOrEmpty(googledrive.SharedDriveMarker));

MoveResource Method (GoogleDrive Component)

Moves a file or folder.

Syntax

void __fastcall MoveResource(String ResourceId, String NewParentIds);

Remarks

This method "moves" an existing file or folder specified by ResourceId to the folders specified by NewParentIds (which should be specified as a comma-separated list of folder resource Ids).

After this method returns, the folders specified by NewParentIds will be the only parents of in the resource's parent list. If you wish to add additional parents for the resource without removing its existing parents, use AddParents instead.

Note that resources within a shared drive must always have exactly one parent, and that only shared drive members with the "file organizer" or "organizer" roles can move files and folders within a shared drive.

RemoveParents Method (GoogleDrive Component)

Removes folders from the list of parents for a file or folder.

Syntax

void __fastcall RemoveParents(String ResourceId, String ParentIds);

Remarks

This method removes one or more folders, specified by ParentIds, from the list of parents for the file or folder specified by ResourceId.

ParentIds should be specified as a comma-separated list of one or more resource Ids.

Note that resources within a shared drive must always have exactly one parent, and that only shared drive members with the "file organizer" or "organizer" roles can move files and folders within a shared drive.

RemoveSharedDriveMember Method (GoogleDrive Component)

Removes an existing shared drive member.

Syntax

void __fastcall RemoveSharedDriveMember(String SharedDriveId, String PermissionId);

Remarks

This is a convenience method that removes an existing member of a shared drive (specified by SharedDriveId) by deleting their associated permission (specified by PermissionId).

Refer to UpdatePermissions for more information about how permissions work in general, how permissions relate to shared drive members, and how to manipulate multiple members at once. string sharedDriveId = "20983euijdsds"; // First, we'll add a new member to the shared drive. The two integer parameters signify: // * The role type. 2 is the "Writer" role, which provides read and write (but not organize) permissions. // * The permission type. 0 means this is a single user (versus a group). // The Id of the new permission we've created on the shared drive--which is what actually causes the user to // be a member of the shared drive--is returned. string permId = googledrive.AddSharedDriveMember(sharedDriveId, 2, 0, "fakeuser@example.com"); // At some point later, perhaps this user has abused their privileges and we wish to revoke their writer // permissions. We change their role to "Commenter", which provides reader and commenting permissions. googledrive.UpdateSharedDriveMember(sharedDriveId, permId, 1); // 1 is the "Commenter" role. // Or perhaps we wish to simply remove the user's shared drive membership completely. googledrive.RemoveSharedDriveMember(sharedDriveId, permId);

Reset Method (GoogleDrive Component)

Resets the component to its initial state.

Syntax

void __fastcall Reset();

Remarks

This method resets the component to its initial state.

RestoreResource Method (GoogleDrive Component)

Restores a file or folder from the trash.

Syntax

void __fastcall RestoreResource(String ResourceId);

Remarks

This method restores the file or folder specified by ResourceId from the trash.

SendCustomRequest Method (GoogleDrive Component)

Sends a custom request to the Google Drive API.

Syntax

void __fastcall SendCustomRequest(String HttpMethod, String RequestPath, String RequestBody);

Remarks

This method can be used to send arbitrary requests to the Google Drive API.

Valid values for HttpMethod are:

  • GET (default if empty)
  • HEAD
  • POST
  • PUT
  • PATCH
  • DELETE

The value passed for RequestPath must already be URL-encoded in a manner acceptable to the Google Drive API. The RequestBody parameter may be empty if not needed.

Usage

When this method is called, the component does the following:

  1. Builds a request URL, including query parameters, as follows:
    • The specified RequestPath is appended to the Google Drive API endpoint, https://www.googleapis.com/drive/v3.
    • All query parameters in the QueryParam* properties are added to the request URL.
  2. Sends the request using the specified HttpMethod, the request URL build in step 1, the header information held by Authorization and OtherHeaders, and the given RequestBody (if non-empty).
  3. Stores the response headers in the ParsedHeader* properties, and the response body in the specified LocalFile, or ResourceData (using the same logic as DownloadFile).

If the response body is JSON data, the XPath, XText, and other X* configuration settings can then be used to navigate and extract information from it.

ToggleSharedDriveHidden Method (GoogleDrive Component)

Hides or unhides a shared drive.

Syntax

void __fastcall ToggleSharedDriveHidden(String SharedDriveId, bool Hidden);

Remarks

This method hides or unhides the shared drive specified by SharedDriveId.

If a shared drive is hidden, it will not show up in the Google Drive UI by default (but is still otherwise accessible). Google Drive tracks this setting separately for each user; i.e., each member of a shared drive can choose whether the shared drive should be hidden or not.

TrashResource Method (GoogleDrive Component)

Moves the specified file or folder to the trash.

Syntax

void __fastcall TrashResource(String ResourceId);

Remarks

This method moves the file or folder specified by ResourceId to the trash. The resource may be restored from the trash by calling RestoreResource.

To permanently delete a resource, call DeleteResource. To empty the trash (thus permanently deleting all trashed items), call EmptyTrash.

UpdatePermissions Method (GoogleDrive Component)

Create, update, and delete permissions on a file, folder, or shared drive.

Syntax

void __fastcall UpdatePermissions(String ResourceId);

Remarks

This method is used to create, update, and delete permissions for the file, folder, or shared drive specified by ResourceId.

Each item represented by the Permission* properties has a PermissionModOp property which can be set to one of the following values:

moNone (0) (default) No-Op (the component skips the permission).
moCreate (1) The permission will be created.
moUpdate (2) The permission will be updated.
moDelete (3) The permission will be deleted.

When this method is called, the component will iterate through the Permission* properties and execute the requested operation for each permission.

For each permission operation which completes successfully, the component will change its PermissionModOp property back to moNone (0).

Important: The component executes permission operations one-by-one due to how the Google Drive API works. If the component encounters an issue during one of the operations, it will fail with an error, and won't attempt to execute any remaining permission items' operations. The error message will indicate the index of the permission item which caused the error.

Usage

ListPermissions must be called before using this method in order to populate the Permission* properties with a resource's existing permissions. (When creating new permissions, calling ListPermissions first is optional, but still recommended to ensure that the component reflects the latest information.)

To create new permissions, add new items to the Permission* properties by incrementing the PermissionCount property as necessary.

For each permission being created or updated, set its properties to the desired values. The PermissionModOp property should be set to a value other than moNone (0) for any permission that should be created, updated, or deleted.

Once the permission items have been set up as desired, call this method. // For simplicity's sake, assume that this file currently has no permissions on it. string fileId = "awd0s79uocijl23wf"; // Add permissions for a couple of users to the file. googledrive.Permissions.Add(new GDrivePermission() { Email = "fakeuser1@example.com", Role = GDrivePermissionRoles.prReader, ModOp = GDrivePermissionModOps.moCreate }); googledrive.Permissions.Add(new GDrivePermission() { Email = "fakeuser2@example.com", Role = GDrivePermissionRoles.prWriter, ModOp = GDrivePermissionModOps.moCreate }); googledrive.UpdatePermissions(fileId); // Now we'll update the permissions on the file, removing one of the users and // changing the other's role to "Commenter". Always list the permissions first // to ensure that the latest data is loaded into the component. googledrive.ListPermissions(fileId); googledrive.Permissions[0].ModOp = GDrivePermissionModOps.moDelete; googledrive.Permissions[1].Role = GDrivePermissionRoles.prCommenter; googledrive.Permissions[1].ModOp = GDrivePermissionModOps.moUpdate; // Now commit the changes. googledrive.UpdatePermissions(fileId);

Transferring Ownership

When creating or updating a permission with the prOwner (3) role on a file or folder, the old owner will have their role downgraded to prWriter (2). The TransferOwnership configuration setting must be set to "True" before calling UpdatePermissions to acknowledge this side effect.

Note that this does not apply to shared drives themselves, or resources in shared drives. It also does not apply when moving resources into or out of shared drives.

Shared Drive Permissions

The permissions on a shared drive itself determine what users are members of the shared drive, and what capabilities they have within the shared drive. Said another way, creating, updating, and deleting the permissions on a shared drive will create, update the capabilities of, and delete shared drive memberships.

Since members are determined by the permissions on a shared drive, this method can of course be used to manipulate one or more shared drive members at once. For simpler use cases which only need to modify one member at a time, the AddSharedDriveMember, UpdateSharedDriveMember, and RemoveSharedDriveMember convenience methods can be used.

Note: Only the ptUser (0) and ptGroup (1) permission types are valid for permissions on a shared drive itself.

Just like in a regular user's drive, permissions can also be applied to files within a shared drive to explicitly share them with specific users (whether they're members of the shared drive or not).

UpdateResource Method (GoogleDrive Component)

Updates a file or folder.

Syntax

void __fastcall UpdateResource(String ResourceId);

Remarks

This method updates the metadata for the file or folder resource identified by ResourceId. For file resources, the file data can optionally be updated as well.

Usage

There must be an item in the Resource* properties whose ResourceId property matches the specified ResourceId value before this method is called.

  1. If necessary, call GetResourceInfo or ListResources to ensure an item with the resource's latest information is present in the Resource* properties.
  2. Modify the item's Resource* properties as desired; the following properties are supported:
  3. For file resources, you may set LocalFile or ResourceData if you wish to update the file data on the server. (Refer to UploadFile for more information about simple vs. resumable uploads and encrypting the file data before uploading.)
  4. Finally, call this method to update the resource.
// Load the latest information about the resource into the Resources collection. string resId = "2309urjdojwefs0d09u"; googledrive.GetResourceInfo(resId); // We'll update the file resource's name, description, and content. googledrive.ResourceData = "new file content"; googledrive.Resources[0].Name = "CoolStuff2.txt"; googledrive.Resources[0].Description = "This is a text file with cool stuff in it"; googledrive.UpdateResource(resId);

UpdateSharedDrive Method (GoogleDrive Component)

Updates a shared drive.

Syntax

void __fastcall UpdateSharedDrive(String SharedDriveId, String NewName, int SetRestrictions, int UnsetRestrictions);

Remarks

This method updates the name of and/or restrictions applied to the shared drive specified by SharedDriveId.

If the current user is allowed to rename the shared drive (i.e., if the SharedDriveCapabilities property has the 0x08000 flag set), then a new name can be provided using the NewName parameter. If the user is not allowed to rename the shared drive, or wishes to preserve its current name, pass empty string for NewName.

Similarly, if the current user is allowed to alter one or more of the shared drive's SharedDriveRestrictions (i.e., if the SharedDriveCapabilities property has the 0x00002, 0x00004, and/or 0x00010 flags set), then the desired restrictions can be set or unset by including their associated flags, listed below, in the values passed for the SetRestrictions and UnsetRestrictions parameters.

Hex Value Description
0x0001 Administrative privileges on the shared drive are required to modify restrictions.
0x0002 Readers and commenters cannot copy, print, or download files in the shared drive.
0x0004 Access to the shared drive, and its contents, is restricted to users in its domain.
0x0008 Access to items in the shared drive is restricted to its members.

Note that calls to this method will fail if:

  • A non-empty string is passed for NewName, but the current user isn't allowed to rename the shared drive.
  • The values passed for SetRestrictions and/or UnsetRestrictions contains any flag that corresponds to a restriction the current user isn't allowed to alter.
  • Any restriction flag appears in both SetRestrictions and UnsetRestrictions.

Changes requested using this method are "all-or-nothing"; e.g., if both a new name and a new set of restrictions are requested, but the current user isn't allowed to rename the shared drive, the entire request fails.

UpdateSharedDriveMember Method (GoogleDrive Component)

Updates an existing shared drive member's role.

Syntax

void __fastcall UpdateSharedDriveMember(String SharedDriveId, String PermissionId, int Role);

Remarks

This is a convenience method that updates the role of an existing member of a shared drive (specified by SharedDriveId) by modifying their associated permission (specified by PermissionId).

Role specifies the member's role. Valid values are:

prReader (0) Read-only permissions.
prCommenter (1) Read-only plus commenting permissions.
prWriter (2) Read, write, and comment permissions.
prFileOrganizer (4) Writer permissions, plus the ability to move and trash resources.
prOrganizer (5) File organizer permissions, plus the ability to permanently delete resources from, and rename/delete/alter the membership of, a shared drive.

Refer to UpdatePermissions for more information about how permissions work in general, how permissions relate to shared drive members, and how to manipulate multiple members at once. string sharedDriveId = "20983euijdsds"; // First, we'll add a new member to the shared drive. The two integer parameters signify: // * The role type. 2 is the "Writer" role, which provides read and write (but not organize) permissions. // * The permission type. 0 means this is a single user (versus a group). // The Id of the new permission we've created on the shared drive--which is what actually causes the user to // be a member of the shared drive--is returned. string permId = googledrive.AddSharedDriveMember(sharedDriveId, 2, 0, "fakeuser@example.com"); // At some point later, perhaps this user has abused their privileges and we wish to revoke their writer // permissions. We change their role to "Commenter", which provides reader and commenting permissions. googledrive.UpdateSharedDriveMember(sharedDriveId, permId, 1); // 1 is the "Commenter" role. // Or perhaps we wish to simply remove the user's shared drive membership completely. googledrive.RemoveSharedDriveMember(sharedDriveId, permId);

UploadFile Method (GoogleDrive Component)

Uploads, and optionally converts, a new file.

Syntax

String __fastcall UploadFile(String FileName, String MimeType);

Remarks

This method uploads a new file and returns the Id of the newly-created file resource.

If LocalFile is set the file will be uploaded from the specified path. If LocalFile is not set the data in ResourceData will be used.

Usage

The name specified by the FileName parameter should include a file extension.

If MimeType is "", the file will be uploaded as-is and its MIME type will be automatically determined. The file can be converted to one of the Google formats by explicitly setting MimeType to one of the MIME types in the table below.

Before calling this method, always set ResourceCount to 0 to clear the stored resource data. Then, if you wish to set file metadata and/or assign parent Ids when the file is uploaded, set ResourceCount to 1 and set the desired properties. (Note that the name and MIME type passed to this method will take precedence.)

To encrypt the file before uploading it, set EncryptionAlgorithm and EncryptionPassword.

Finally, call this method to upload the file, along with any metadata that may be set.

Original File Format Google FormatMIME Type
MS Word, OpenDocument Text, HTML, RTF, Plain Text Google Docs application/vnd.google-apps.document
MS Excel, OpenDocument Spreadsheet, CSV, TSV, Plain Text Google Sheets application/vnd.google-apps.spreadsheet
MS Powerpoint, OpenDocument Presentation Google Slides application/vnd.google-apps.presentation
PDF, JPEG, PNG, GIF, BMP (images are embedded in a Doc) Google Docs application/vnd.google-apps.document
Plain Text, JSON Google Apps Script application/vnd.google-apps.script

Upload Notes

Google Drive offers two ways to upload a file. For smaller files a simple upload option is provided to upload data in one request. This is the default option. For larger files, uploads can be fragmented into multiple pieces, allowing resuming of uploads that may be interrupted.

Simple

By default the component uses the simple upload mechanism. googledrive.LocalFile = "../MyFile.zip"; googledrive.UploadFile("MyFile.zip", "");

Resumable

To enable resumable uploads set UseResumableUpload to true. This is recommended for large files. The component will automatically fragment the specified file into smaller pieces and upload each individually. FragmentSize may be set to specify the size of the fragment if desired. The default fragment size is 10 MB.

When UseResumableUpload is set to true and UploadFile is called, a resumable upload session is started by the component. ResumeURL is populated with a URL identifying the session (this value may be needed for additional operations if the upload does not complete normally).

During a resumable upload, the FragmentComplete event fires after each fragment is uploaded to indicate overall progress. The component also updates StartByte as necessary to indicate the current offset in the file.

If the upload is interrupted for any reason, resuming it is easy. First, verify that ResumeURL and StartByte are populated (if the same instance of the component is used, they should already be populated, and no special action should be needed). Then call UploadFile again to resume the upload at the specified StartByte offset.

Note that if the upload is not resumed after some time the upload session will expire. GetUploadStatus may be used to check the status of a resumable upload. googledrive.LocalFile = "../MyFile.zip"; googledrive.UploadFile("MyFile.zip", ""); //The transfer is interrupted and UploadFile() above fails. Later, resume the download. //Using the same instance StartByte and ResumeURL are already populated from the previous //upload attempt. googledrive.UploadFile("MyFile.zip", "");

ChangeList Event (GoogleDrive Component)

Fires once for each change when ListChanges is called.

Syntax

typedef struct {
  String ResourceId;
  String SharedDriveId;
  bool Removed;
  String Time;
  int ChangeType;
} TcsGoogleDriveChangeListEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveChangeListEvent)(System::TObject* Sender, TcsGoogleDriveChangeListEventParams *e);
__property TcsGoogleDriveChangeListEvent OnChangeList = { read=FOnChangeList, write=FOnChangeList };

Remarks

This event fires once for each change returned when ListChanges is called.

ResourceId is the Id of the file or folder to which the change applies.

SharedDriveId is the Id of the shared drive associated with the change.

Removed indicates whether the file or shared drive has been removed from the view of the change list. For example, if a file was permanently deleted or access to it was revoked, this would return true (it would still return false if the file was simply in the trash).

Time is a DateTime string representing the time of the change. This is a combined date-time value (formatted according to RFC 3339).

ChangeType indicates whether this is a file (0) or a shared drive (1) change.

Refer to ListChanges for more information.

EndTransfer Event (GoogleDrive Component)

This event fires when a document finishes transferring.

Syntax

typedef struct {
  int Direction;
} TcsGoogleDriveEndTransferEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveEndTransferEvent)(System::TObject* Sender, TcsGoogleDriveEndTransferEventParams *e);
__property TcsGoogleDriveEndTransferEvent OnEndTransfer = { read=FOnEndTransfer, write=FOnEndTransfer };

Remarks

The EndTransfer event is fired when the document text finishes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (GoogleDrive Component)

Fired when information is available about errors during data delivery.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TcsGoogleDriveErrorEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveErrorEvent)(System::TObject* Sender, TcsGoogleDriveErrorEventParams *e);
__property TcsGoogleDriveErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

FragmentComplete Event (GoogleDrive Component)

Fires after each fragment of a resumable upload is completed.

Syntax

typedef struct {
  int FragmentNumber;
  int FragmentCount;
  bool Interrupt;
} TcsGoogleDriveFragmentCompleteEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveFragmentCompleteEvent)(System::TObject* Sender, TcsGoogleDriveFragmentCompleteEventParams *e);
__property TcsGoogleDriveFragmentCompleteEvent OnFragmentComplete = { read=FOnFragmentComplete, write=FOnFragmentComplete };

Remarks

When UseResumableUpload is true and UploadFile is called, this event will fire after each fragment is uploaded, providing an indication of overall upload progress.

FragmentNumber is the number of the current fragment that has completed. This value starts at 1.

FragmentCount is the total number of fragments that will be uploaded.

Interrupt can be set to true to interrupt the upload. The upload may be resumed later.

Header Event (GoogleDrive Component)

This event is fired every time a header line comes in.

Syntax

typedef struct {
  String Field;
  String Value;
} TcsGoogleDriveHeaderEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveHeaderEvent)(System::TObject* Sender, TcsGoogleDriveHeaderEventParams *e);
__property TcsGoogleDriveHeaderEvent OnHeader = { read=FOnHeader, write=FOnHeader };

Remarks

The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

Log Event (GoogleDrive Component)

This event fires once for each log message.

Syntax

typedef struct {
  int LogLevel;
  String Message;
  String LogType;
} TcsGoogleDriveLogEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveLogEvent)(System::TObject* Sender, TcsGoogleDriveLogEventParams *e);
__property TcsGoogleDriveLogEvent OnLog = { read=FOnLog, write=FOnLog };

Remarks

This event fires once for each log message generated by the component. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of message. Possible values are as follows:

0 (None) No events are logged.
1 (Info - default) Informational events are logged.
2 (Verbose) Detailed data are logged.
3 (Debug) Debug data are logged.

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

Message is the log entry.

LogType identifies the type of log entry. Possible values are as follows:

  • "Info"
  • "RequestHeaders"
  • "ResponseHeaders"
  • "RequestBody"
  • "ResponseBody"
  • "ProxyRequest"
  • "ProxyResponse"
  • "FirewallRequest"
  • "FirewallResponse"

PermissionList Event (GoogleDrive Component)

This event fires once for each permission returned when listing permissions.

Syntax

typedef struct {
  String Id;
  int Role;
  int PermissionType;
  String Email;
  String Domain;
  bool AllowFileDiscovery;
} TcsGoogleDrivePermissionListEventParams;
typedef void __fastcall (__closure *TcsGoogleDrivePermissionListEvent)(System::TObject* Sender, TcsGoogleDrivePermissionListEventParams *e);
__property TcsGoogleDrivePermissionListEvent OnPermissionList = { read=FOnPermissionList, write=FOnPermissionList };

Remarks

When calling ListPermissions this event will fire once for each permission that is returned.

Id is the Id of the permission.

Role is the role of the permission. Possible values are:

prReader (0) Read-only permissions.
prCommenter (1) Read-only plus commenting permissions.
prWriter (2) Read, write, and comment permissions.
prOwner (3) Full ownership (personal drives only).
prFileOrganizer (4) Writer permissions, plus the ability to move and trash resources (shared drives only).
prOrganizer (5) File organizer permissions, plus the ability to permanently delete resources from, and rename/delete/alter the membership of, a shared drive (shared drives only).

PermissionType indicates the type of the permission. Possible values are:

0 (ptUser) A single user.
1 (ptGroup) A group.
2 (ptDomain) A domain.
3 (ptAnyone) Anyone, authenticated or not.

Email holds the email address of the user or group that the permission applies to when Type is 0 or 1.

Domain holds the domain that the permission applies to when Type is 2.

AllowFileDiscovery signifies whether the permission allows the file to be discovered through search. It is only applicable when Type is 2 or 3.

Progress Event (GoogleDrive Component)

Fires during an upload or download to indicate transfer progress.

Syntax

typedef struct {
  int Direction;
  __int64 BytesTransferred;
  __int64 TotalBytes;
  int PercentDone;
} TcsGoogleDriveProgressEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveProgressEvent)(System::TObject* Sender, TcsGoogleDriveProgressEventParams *e);
__property TcsGoogleDriveProgressEvent OnProgress = { read=FOnProgress, write=FOnProgress };

Remarks

This event fires during an upload or download to indicate the progress of the transfer of the entire request. By default, this event will fire each time PercentDone increases by one percent; the ProgressStep configuration setting can be used to alter this behavior.

Direction indicates whether the transfer is an upload (0) or a download (1).

BytesTransferred reflects the number of bytes that have been transferred so far, or 0 if the transfer is starting (however, see note below).

TotalBytes reflects the total number of bytes that are to be transferred, or -1 if the total is unknown. This amount includes the size of everything in the request like HTTP headers.

PercentDone reflects the overall progress of the transfer, or -1 if the progress cannot be calculated.

Note: By default, the component tracks transfer progress absolutely. If a transfer is interrupted and later resumed, the values reported by this event upon and after resumption will account for the data that was transferred before the interruption.

For example, if 10MB of data was successfully transferred before the interruption, then this event will fire with a BytesTransferred value of 10485760 (10MB) when the transfer is first resumed, and then continue to fire with successively greater values as usual.

This behavior can be changed by disabling the ProgressAbsolute configuration setting, in which case the component will treat resumed transfers as "new" transfers. In this case, the BytesTransferred parameter will always be 0 the first time this event fires, regardless of whether the transfer is new or being resumed.

ResourceList Event (GoogleDrive Component)

Fires once for each resource returned when listing resources.

Syntax

typedef struct {
  String Id;
  String Name;
  String Extension;
  String Description;
  int ResourceType;
  String SharedDriveId;
  String CreatedTime;
  String ModifiedTime;
  __int64 Size;
  bool Trashed;
} TcsGoogleDriveResourceListEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveResourceListEvent)(System::TObject* Sender, TcsGoogleDriveResourceListEventParams *e);
__property TcsGoogleDriveResourceListEvent OnResourceList = { read=FOnResourceList, write=FOnResourceList };

Remarks

This event fires once for each resource returned when ListResources, ListChildren, ListParents, or GetResourceInfo is called.

Id is the Id of the resource.

Name holds the resource's name.

Extension is the file extension.

Description holds a short description of the resource (if any).

ResourceType indicates whether the resource is a file or folder. Possible values are:

0 (gdrtFile) A file.
1 (gdrtFolder) A folder.
2 (gdrtRevision) A revision.

SharedDriveId is the Id of the shared drive which the resource is in, or empty string if it is not in a shared drive.

CreatedTime holds a DateTime string representing the creation date of the resource. This is a combined date-time value (formatted according to RFC 3339).

ModifiedTime holds a DateTime string representing the last modified date of the resource. This is a combined date-time value (formatted according to RFC 3339).

Size holds the size of the file in bytes. This is only applicable to files.

Trashed indicates whether the resource is in the trash.

SharedDriveList Event (GoogleDrive Component)

Fires once for each shared drive returned when listing shared drives.

Syntax

typedef struct {
  String Id;
  String Name;
  String CreatedTime;
  bool Hidden;
  int Capabilities;
  int Restrictions;
} TcsGoogleDriveSharedDriveListEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveSharedDriveListEvent)(System::TObject* Sender, TcsGoogleDriveSharedDriveListEventParams *e);
__property TcsGoogleDriveSharedDriveListEvent OnSharedDriveList = { read=FOnSharedDriveList, write=FOnSharedDriveList };

Remarks

This event fires once for each shared drive returned when ListSharedDrives is called.

Id is the Id of the shared drive.

Name holds the shared drive's name.

CreatedTime holds a DateTime string representing the creation date of the resource. This is a combined date-time value (formatted according to RFC 3339).

Hidden indicates whether the shared drive is hidden from default view (i.e., whether it is shown by default in the Google Drive UI).

Capabilities describes the effective capabilities that the current user has for the shared drive. The value is a bit field comprised of one or more of the following, OR'ed together:

Hex Value Description
0x00001 User can add children to the shared drive's folders.
0x00002 User can change the shared drive's copyRequiresWriterPermission restriction.
0x00004 User can change the shared drive's domainUsersOnly restriction.
0x00008 User can change the shared drive's background image.
0x00010 User can change the shared drive's driveMembersOnly restriction.
0x00020 User can comment on the shared drive's files.
0x00040 User can copy files in the shared drive.
0x00080 User can permanently delete children from the shared drive's folders.
0x00100 User can delete the shared drive.
0x00200 User can download the shared drive's files.
0x00400 User can edit the shared drive's files.
0x00800 User can list children of folders in the shared drive.
0x01000 User can add, remove, and update shared drive members.
0x02000 User can read revisions of the shared drive's files.
0x04000 User can rename the shared drive's files and folders.
0x08000 User can rename the shared drive.
0x10000 User can share the shared drive's files and folders.
0x20000 User can trash children from the shared drive's folders.

Restrictions describes any restrictions that apply to the shared drive and/or its contents. The value is a bit field comprised of one or more of the following, OR'ed together:

Hex Value Description
0x0001 Administrative privileges on the shared drive are required to modify restrictions.
0x0002 Readers and commenters cannot copy, print, or download files in the shared drive.
0x0004 Access to the shared drive, and its contents, is restricted to users in its domain.
0x0008 Access to items in the shared drive is restricted to its members.

SSLServerAuthentication Event (GoogleDrive Component)

Fired after the server presents its certificate to the client.

Syntax

typedef struct {
  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;
  String CertSubject;
  String CertIssuer;
  String Status;
  bool Accept;
} TcsGoogleDriveSSLServerAuthenticationEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveSSLServerAuthenticationEvent)(System::TObject* Sender, TcsGoogleDriveSSLServerAuthenticationEventParams *e);
__property TcsGoogleDriveSSLServerAuthenticationEvent OnSSLServerAuthentication = { read=FOnSSLServerAuthentication, write=FOnSSLServerAuthentication };

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (GoogleDrive Component)

Fired when secure connection progress messages are available.

Syntax

typedef struct {
  String Message;
} TcsGoogleDriveSSLStatusEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveSSLStatusEvent)(System::TObject* Sender, TcsGoogleDriveSSLStatusEventParams *e);
__property TcsGoogleDriveSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (GoogleDrive Component)

This event fires when a document starts transferring (after the headers).

Syntax

typedef struct {
  int Direction;
} TcsGoogleDriveStartTransferEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveStartTransferEvent)(System::TObject* Sender, TcsGoogleDriveStartTransferEventParams *e);
__property TcsGoogleDriveStartTransferEvent OnStartTransfer = { read=FOnStartTransfer, write=FOnStartTransfer };

Remarks

The StartTransfer event is fired when the document text starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Transfer Event (GoogleDrive Component)

This event is fired while a document transfers (delivers document).

Syntax

typedef struct {
  int Direction;
  __int64 BytesTransferred;
  int PercentDone;
  String Text;
  DynamicArray<Byte> TextB;
} TcsGoogleDriveTransferEventParams;
typedef void __fastcall (__closure *TcsGoogleDriveTransferEvent)(System::TObject* Sender, TcsGoogleDriveTransferEventParams *e);
__property TcsGoogleDriveTransferEvent OnTransfer = { read=FOnTransfer, write=FOnTransfer };

Remarks

The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.

The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Config Settings (GoogleDrive Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

GoogleDrive Config Settings

AccumulatePages:   Whether the component should accumulate subsequent pages of results when listing them.

This setting controls how the component behaves when listing multiple pages of results. If this setting is enabled, each successive page of results will be appended to the appropriate collection properties until the last page of results has been listed (at which point the next list call will cause said collection to be cleared first). If this setting is disabled, the collection will be cleared every time a page of results is returned.

By default, this setting is enabled, allowing all pages of results to be accumulated in the appropriate collection properties.

DocsExportFormat:   The file format to export Google Docs files as when downloading.

This setting specifies what file format to export Google Docs as when downloading; it takes a file extension, which will be applied to the downloaded filename if necessary. Valid values (and their associated MIME types) are:

  • docx (default) - application/vnd.openxmlformats-officedocument.wordprocessingml.document
  • epub - application/epub+zip
  • htm or html - text/html
  • odt - application/vnd.oasis.opendocument.text
  • pdf - application/pdf
  • rtf - application/rtf
  • txt - text/plain
  • zip - application/zip
You may also specify a string like [extension],[MIME type] instead of one of the file extensions above if you wish to customize the MIME type to export the file as and/or the file extension to apply to the downloaded file.

Note that this setting is ignored if a MIME type is explicitly passed to the DownloadFile method.

DownloadTempFile:   The temporary file used when downloading encrypted data.

This setting specifies the temporary file used when downloading encrypted data.

When downloading encrypted data with LocalFile set, the component will automatically create a temporary file at TempPath to hold the encrypted file contents. When the download is complete, the data is decrypted to LocalFile.

If the download is interrupted, the specified file will hold the partially downloaded encrypted file contents. Before resuming the download, this setting must be set to a valid file containing the partially encrypted file contents. See DownloadFile for details.

DrawingsExportFormat:   The file format to export Google Drawings files as when downloading.

This setting specifies what file format to export Google Drawings as when downloading; it takes a file extension, which will be applied to the downloaded filename if necessary. Valid values (and their associated MIME types) are:

  • jpg or jpeg - image/jpeg
  • pdf - application/pdf
  • png (default) - image/png
  • svg - image/svg+xml
You may also specify a string like [extension],[MIME type] instead of one of the file extensions above if you wish to customize the MIME type to export the file as and/or the file extension to apply to the downloaded file.

Note that this setting is ignored if a MIME type is explicitly passed to the DownloadFile method.

EncryptionIV:   The initialization vector to be used for encryption/decryption.

When encrypting or decrypting a file, this setting may be set to specify the initialization vector. Normally the component will derive this value automatically from EncryptionPassword.

This setting accepts a hex encoded value.

EncryptionKey:   The key to use during encryption/decryption.

When encrypting or decrypting a file, this setting may be set to specify the key to use. Normally the component will derive this value automatically from EncryptionPassword.

This setting accepts a hex encoded value.

EncryptionPasswordKDF:   The KDF algorithm to use during password based encryption and decryption.

This setting specified the Key Derivation Function (KDF) used to derive a key from the specified EncryptionPassword. Possible values are:

  • 0 (default) - PBKDF1
  • 1 - PBKDF2
Note: PBKDF1 is not FIPS compliant. When operating in FIPS mode PBKDF2 should be used.

FragmentSize:   The fragment size.

This setting controls the fragment size, in bytes, to use while uploading files when UseResumableUpload is true. When UploadFile is called the file will be fragmented into pieces of this size.

The default value is 10485760 (10MB).

IconLink[i]:   A static, unauthenticated link to the file icon for the specified resource.

This setting can be queried to return a static, unauthenticated link to the file icon for the resource at index i.

Valid values for i are from 0 to (ResourceCount - 1).

IncludeAllFields:   Whether to request all fields when listing resources.

This setting specifies whether the component requests all fields be returned when calling ListResources.

When set to false (default), the RequestedFields configuration setting is set added to the request is set to "default". When set to true, the RequestedFields configuration setting is set to "*" which will return all the fields. Further specifications can be made in the RequestedFields configuration setting.

IncludeFolderProperties:   Whether resource properties apply when calling CreateFolder.

This setting specifies whether the Resource* properties are applicable when calling CreateFolder.

When false (default), the properties are ignored and the folder is simply created with the name specified. When set to true, the properties may be used to specify additional information about the folder.

ListResourcesMode:   What items to include when listing resources.

This setting specifies what items to include when listing resources with ListResources and ListChildren. Valid values are:

  • 0 (default) - Files and folders
  • 1 - Files only
  • 2 - Folders only
MaxPermissionResults:   Limits the number of permissions results.

This setting specifies the maximum number of results to be returned each time ListPermissions is called. If there are more items than can be returned, the results will be paged and the PermissionMarker property populated.

Acceptable values are from 1 to 100, inclusive. The default is -1, which causes the server's default (100 for shared drives and their contents, unlimited otherwise) to be used.

MaxResults:   Limits the number of resource and change results.

This setting specifies the maximum number of results to be returned each time ListResources, ListChildren, or ListChanges is called. If there are more items than can be returned, the results will be paged and the appropriate "Marker" property populated.

Acceptable values are from 1 to 1000 inclusive. The default is -1, which causes the server's default (100) to be used.

MaxSharedDriveResults:   Limits the number of shared drive results.

This setting specifies the maximum number of results to be returned each time ListSharedDrives is called. If there are more items than can be returned, the results will be paged and the SharedDriveMarker property populated.

Acceptable values are from 1 to 100, inclusive. The default is -1, which causes the server's default (10) to be used.

NormalizedFileName[i]:   File name constructed using the specified resource's information.

This setting can be queried to return a normalized file name for the resource at index i. The normalized file name will be the resource's name, plus an appropriate file extension based on the resource's MIME type.

Note that the extension is only appended if the resource has one of the Google Apps MIME types, and if the resource's name doesn't already end with the applicable extension.

Valid values for i are from 0 to (ResourceCount - 1).

OAuthAccessTokenExpiration:   The lifetime of the access token.

This setting holds the lifetime of the access token in seconds. For instance the value 3600 indicates that the token will expire in one hour from the time it was generated.

OAuthAuthorizationTokenType:   The type of access token returned.

The applicable values include the following:

Bearer (default)When the access token returned by the server is a Bearer type, the authorization string returned by Authorize will be in the format "Bearer access_token". This can be supplied as the value of the HTTP Authorization header.
OAuthAutomaticRefresh:   Whether or not to refresh an expired access token automatically.

When this setting is set to true and the Authorization property is not set, the component will automatically get a new access token if it has the necessary properties to do so without user interaction.

For example, when using the Authorization Code grant type, the OAuthRefreshToken property should be set to a valid refresh token. When using the Client Credential grant type however, the component does not need any additional properties set as it can already get a new access token without user interaction.

OAuthBrowserResponseTimeout:   Specifies the amount of time to wait for a response from the browser.

This setting specifies the amount of time (in seconds) the component will wait for a response from the browser when requesting user authentication. The default value is 0, meaning that the component will wait indefinitely.

OAuthIncludeEmptyRedirectURI:   Whether an empty redirect_uri parameter is included in requests.

This setting specifies whether redirect_uri is included in the request made by Authorize if it is empty.

If set to true (default) the redirect_uri will be sent in all cases. If set to false the redirect_uri will only be sent if it has a value.

OAuthJWTPayload:   The payload of the JWT access token if present.

This configuration setting provides the payload section of a JWT access token if the access token is a JWT and the component is able to parse out the payload section. This setting only applies to access tokens that are returned from a service provider after successfully authorizing and authenticating with the service.

To parse the payload for specific claims, see OAuthJWTXPath.

OAuthJWTXChildCount:   The number of child elements of the current element.

The number of child attributes of the current element. The OAuthJWTXChildCount configuration settings will be indexed from 0 to (OAuthJWTXChildCount - 1).

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OauthJWTXChildName[i]:   The name of the child element.

Provides the name of the i'th child element of the current element.

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OAuthJWTXChildXText[i]:   The inner text of the child element.

Provides the inner text of the i'th child element of the current element.

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OAuthJWTXElement:   The name of the current element.

Provides the name of the current element.

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OauthJWTXParent:   The parent of the current element.

Provides the parent of the current element.

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OAuthJWTXPath:   Provides a way to point to a specific element in the returned payload of a JWT based access token.

The JWTXPath setting allows you to point to specific claims within the payload of a JWT based access token.

XPath Syntax

XPath syntax is available for the payload of JWT based access tokens if available. An XPath is a series of one or more element accessors separated by the / character, for example: /A/B/C/D.

The following are possible values for an element accessor, which operates relative to the current location specified by the XPath accessors which proceed it in the overall XPath string:

Accessor Description
name The first element with a particular name. Can be *.
[i] The i-th element.
name[i] The i-th element with a particular name.
[last()] The last element.
[last()-i] The element i before the last element.
Here are some examples of valid XPaths and some common claims:
DescriptionJSON XPath
Document root /json
Specific element /json/element_one
Username Claim (Microsoft Specific) /json/preferred_username
Registered Application Name Claim (Microsoft Specific) /json/app_displayname

This is not an exhaustive list by any means, but should provide a general idea of the possibilities. To get the text of the specified element, see JWTXText.

OAuthJWTXSubTree:   A snapshot of the current element in the document.

Provides the entirety of the current element (including its sub-elements).

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OAuthJWTXText:   The text of the current element.

Provides the inner text of the current element.

The current element is specified in the OAuthJWTXPath configuration setting. This configuration setting is read-only.

OAuthParamCount:   Specifies the number of additional parameters variables to include in the request.

This setting can be used to add query string parameters to the outgoing request. One common use for this method would be to add the "state" parameter to the request, which can be used when the OAuthClientProfile is ocpWeb to add user defined data. The authorization server will include the "state" parameter in the response and will be available in the post back to your server which will allow you to maintain state in your application. This is used in conjunction with OAuthParamName[i] and OAuthParamValue[i]. For instance:

component.Config("OAuthParamCount=2"); component.Config("OAuthParamName[0]=myvar"); component.Config("OAuthParamValue[0]=myvalue"); component.Config("OAuthParamName[1]=testname"); component.Config("OAuthParamValue[1]=testvalue");

Addtionally, this will also be updated to hold the parameters returned in the response.

for (int i = 0; i < int.Parse(component.Config("OAuthParamCount")); i++) { string name = component.Config("OAuthParamName["+i+"]"); string value = component.Config("OAuthParamValue[" + i + "]"); }

OAuthParamName[i]:   Specifies the parameter name at the specified index.

This setting can be used to retrieve or specify the parameter variable name at the index specified. See OAuthParamCount for details.

OAuthParamValue[i]:   Specifies the parameter value at the specified index.

This setting can be used to retrieve or specify the parameter variable value at the index specified. See OAuthParamCount for details.

OAuthPasswordGrantUsername:   Used in the Resource Owner Password grant type.

Used to set the username property when the OAuthGrantType is set to the password grant type and Authorize is called.

OAuthPKCEChallengeEncoding:   The PKCE code challenge method to use.

This setting controls the PKCE code challenge method used when OAuthUsePKCE is set to true. Possible values are:

  • 1 (Plain)
  • 2 (S256/SHA256 - default)
OAuthPKCEVerifier:   The PKCE verifier used to generate the challenge.

This configuration setting when queried provides the PKCE verifier that is used to generate the PKCE challenge for the Authorize method and the OAuthWebAuthURL field when OAuthUsePKCE is set to true. When using the cocpWeb OAuthClientProfile, the configuration setting can be set instead to allow the authorization request to be made from a different instance than the authentication (token) request.

OAuthReUseWebServer:   Determines if the same server instance is used between requests.

If set to true (default), the same embedded web server instance will be used for multiple requests. If set to false the embedded web server will be created and destroyed on each call to Authorize

OAuthUsePKCE:   Specifies if PKCE should be used.

If set to true (default), Proof Key for Code Exchange (PKCE) defined by RFC 7636 will be used when performing authorization. This setting applies when using the Authorization Code OAuthGrantType. The OAuthPKCEChallengeEncoding configuration setting can be used to control the code challenge method that will be used.

OAuthWebServerActive:   Specifies and controls whether the embedded web server is active.

The setting when queried will return the current state of the web server. If the webserver is active, it will return "true" and if it is inactive it will return "false".

This setting can also be set to activate or deactivate the web server. Under normal circumstances, this would not be required as the component will automatically start and stop the web server when Authorize is called. In certain cases, it is required to start the webserver before calling Authorize. For example, if the OAuthReturnURL needs to be set to a relay server, then you will need to start the web server manually. Another example would be when the OAuthReUseWebServer is set to true, the server will not be automatically stopped, and this configuration setting must be set to "false" to stop the embedded web server.

OAuthWebServerCertStore:   The certificate with private key to use when SSL is enabled.

The name of the certificate store used for the embedded web server's SSL.

The OAuthWebServerCertStoreType property specifies the type of the certificate store specified by OAuthWebServerCertStore. If the store is password protected, specify the password in OAuthWebServerCertStorePassword.

OAuthWebServerCertStore is used in conjunction with the OAuthWebServerCertSubject property in order to specify the certificate to be used during SSL.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Note: This is required when OAuthWebServerSSLEnabled is set to true.

OAuthWebServerCertStorePassword:   The certificate with private key to use when SSL is enabled.

If the certificate store is of a type that requires a password, this property is used to specify that password in order to open the certificate store.

Note: This is only applicable when OAuthWebServerSSLEnabled is set to true.

OAuthWebServerCertStoreType:   The certificate with private key to use when SSL is enabled.

This specifies the type of certificate store. Possible values are:

0 User - This is the default for Windows. This specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 Machine - For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 PFXFile - The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 PFXBlob - The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS12) format.
4 JKSFile - The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is available only in Java.
5 JKSBlob - The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: This store type is available only in Java.
6 PEMKeyFile - The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 PEMKeyBlob - The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
14 PPKFile - The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 PPKBlob - The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 XMLFile - The certificate store is the name of a file that contains a certificate in XML format.
17 XMLBlob - The certificate store is a string that contains a certificate in XML format.
Note: This is required when OAuthWebServerSSLEnabled is set to true.
OAuthWebServerCertSubject:   The certificate with private key to use when SSL is enabled.

The subject of the SSL certificate.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

FieldMeaning
CNCommon Name. This is commonly a hostname like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma, it must be quoted.

Note: This is required when OAuthWebServerSSLEnabled is set to true.

OAuthWebServerFailedResponse:   The custom response that will be displayed to the user if authentication failed.

When Authorize is called the user will be redirected to the embedded web server upon completing authentication with the authorization server. If authentication failed, the HTML specified here will be sent to the user's browser.

OAuthWebServerHost:   The hostname used by the embedded web server displayed in the ReturnURL.

This setting specifies the hostname used by the embedded web server when OAuthClientProfile is set to cocpApplication. This specifies the interface on which the embedded web server listens, and also the value displayed in the OAuthReturnURL. This should be set to the hostname only, not the full URL.

The default value is localhost.

OAuthWebServerPort:   The local port on which the embedded web server listens.

This property specifies the port on which the embedded web server listens. Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be returned when this setting is queried after the server has started listening.This is only applicable when using the embedded web server.

OAuthWebServerResponse:   The custom response that will be displayed to the user.

When Authorize is called the user will be redirected to the embedded web server upon completing authentication with the authorization server. This setting allows you to specify the HTML that will be sent to the user's browser.

OAuthWebServerSSLEnabled:   Whether the web server requires SSL connections.

This setting specifies whether the embedded web server will use SSL. If set to True OAuthWebServerCert* configs are required and the server will only accept SSL connections. If set to False only plaintext connects are supported.

ProgressAbsolute:   Whether the component should track transfer progress absolutely.

This setting controls whether the component tracks upload and download progress absolutely or relatively, with regards to the values reported via the Progress event when an interrupted transfer is resumed.

If this setting is enabled (default), then when a transfer is interrupted and later resumed, the values reported by the Progress event will account for the data that was successfully transferred before the interruption.

If this setting is disabled, then the component will treat resumed transfers as "new" transfers, and the values reported by the Progress event will start at 0 rather than from the number of bytes already transferred.

Refer to the Progress event for more information.

ProgressStep:   How often the progress event should be fired, in terms of percentage.

This setting controls how often the component will fire the Progress event during an upload or download, in terms of percentage. Valid values are 0 to 99, inclusive.

The default value, 1, will cause the Progress event to fire each time the event's PercentDone parameter value increases by one percent. Setting this setting to 0 will cause the Progress event to fire every time data is transferred.

Note that the Progress event will always fire once at the beginning and end of a transfer, regardless of this setting's value. Also, if PercentDone cannot be calculated for a particular transfer (e.g., for downloads that use chunked transfer encoding), then the component will behave as if this setting were 0 for the duration of the transfer.

RawRequest:   Returns the data that was sent to the server.

This setting may be queried after calling any method that sends data to the server to obtain the request data that was transmitted. Such data may be useful for troubleshooting purposes.

RawResponse:   Returns the data that was received from the server.

This setting may be queried after calling any method that sends data to the server to obtain the response data that was received. Such data may be useful for troubleshooting purposes.

RequestedFields:   What fields to request when listing or getting objects.

This setting specifies whether the component requests all fields be returned when calling GetAccountInfo, GetResourceInfo, GetPermissionInfo, GetSharedDriveInfo, ListChildren, ListResources, ListPermissions, and ListSharedDrives.

By default, the rcfgIncludeAllFields; configuration setting will be set to the special keyword "default" which will tell the component to get the default fields for the component. It can be set to a specific value for the fields parameter (ex. "files(id, mimeType)") to restrict or expand what is provided. The special keyword "*" can be used to request all of the fields however, for performance reasons. this is only recommended for development.

If the IncludeAllFields is changed, then the value of the RequestedFields setting will be changed as well. More information can be found in the description of the IncludeAllFields setting. Additionally, if the "fields" parameter is set using the AddQueryParam then the values in the rpQueryParams* properties will take precedent.

ResourceKey[i]:   The resource key used to access a file.

This setting can be queried to return the resource key for the resource at index i, if that resource has one.

Valid values for i are from 0 to (ResourceCount - 1).

RevisionId:   The ID of the revision to make request against.

This setting can set to a revision ID of a resource to modify the requests made from the below methods. To list Revision IDs for a particular file, see ListRevisions.

Modified Methods

Note: Only have this setting set when it is required. Once it is no longer needed, be sure to set clear this setting.

SearchIncomplete:   Indicates whether the server declined to search all possible locations when listing resources.

Due to how the Google Drive API works, when ListResourcesScope is set to lrsAllDrives (3), the server may choose not to include all possible locations in the results (even if the results are paged).

When ListResourcesScope is set to lrsAllDrives (3), this setting will return "True" after calling ListResources or ListChildren if the server chose not to include all possible locations in the result set. If this occurs, narrow your search scope by using another value for ListResourcesScope or by specifying a search query.

SheetsExportFormat:   The file format to export Google Sheets files as when downloading.

This setting specifies what file format to export Google Sheets as when downloading; it takes a file extension, which will be applied to the downloaded filename if necessary. Valid values (and their associated MIME types) are:

  • csv - text/csv
  • ods - application/vnd.oasis.opendocument.spreadsheet
  • pdf - application/pdf
  • tsv - text/tab-separated-values
  • xlsx (default) - application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
  • zip - application/zip
You may also specify a string like [extension],[MIME type] instead of one of the file extensions above if you wish to customize the MIME type to export the file as and/or the file extension to apply to the downloaded file.

Note that this setting is ignored if a MIME type is explicitly passed to the DownloadFile method.

SlidesExportFormat:   The file format to export Google Slides files as when downloading.

This setting specifies what file format to export Google Slides as when downloading; it takes a file extension, which will be applied to the downloaded filename if necessary. Valid values (and their associated MIME types) are:

  • odp - application/vnd.oasis.opendocument.presentation
  • pdf - application/pdf
  • pptx (default) - application/vnd.openxmlformats-officedocument.presentationml.presentation
  • txt - text/plain
You may also specify a string like [extension],[MIME type] instead of one of the file extensions above if you wish to customize the MIME type to export the file as and/or the file extension to apply to the downloaded file.

Note that this setting is ignored if a MIME type is explicitly passed to the DownloadFile method.

TempPath:   The path to the directory where temporary files are created.

This setting specifies the path where temporary files are created when downloading encrypted files. If not specified, the system's temporary directory is used. Refer to DownloadTempFile and DownloadFile for more information.

TransferOwnership:   Must be set to True before modifying permissions in a manner that causes the owner of a resource to change.

When creating or updating a permission with the prOwner (3) role on a file or folder, the old owner will have their role downgraded to prWriter (2). The TransferOwnership configuration setting must be set to "True" before calling UpdatePermissions to acknowledge this side effect.

Note that this does not apply to shared drives themselves, or resources in shared drives. It also does not apply when moving resources into or out of shared drives.

UseDomainAdminAccess:   Whether to make requests using domain administrator permissions.

If the current user happens to have domain administrator permissions, this setting can be enabled to have the component instruct the server to treat requests as having been made by a domain administrator. The following methods are affected by this configuration setting:

XChildCount:   The number of child elements of the current element.

The number of child attributes of the current element. The XChild configuration settings will be indexed from 0 to (XChildCount - 1).

The current element is specified via the XPath configuration setting. This configuration setting is read-only.

XChildName[i]:   The name of the child element.

Provides the name of the i'th child element of the current element.

The current element is specified via the XPath configuration setting. This configuration setting is read-only.

XChildXText[i]:   The inner text of the child element.

Provides the inner text of the i'th child element of the current element.

The current element is specified via the XPath configuration setting. This configuration setting is read-only.

XElement:   The name of the current element.

Provides the name of the current element.

The current element is specified via the XPath configuration setting. This configuration setting is read-only.

XParent:   The parent of the current element.

Provides the parent of the current element.

The current element is specified via the XPath configuration setting. This configuration setting is read-only.

XPath:   Provides a way to point to a specific element in the returned XML or JSON response.

The XPath setting allows you to point to specific elements in the XML or JSON response.

When XPath is set to a valid path, XElement points to the name of the element, with XText, XParent, XSubTree, XChildCount, XChildName[i], and XChildXText[i] providing other properties of the element.

XPath Syntax

XPath syntax is available for both XML and JSON documents. An XPath is a series of one or more element accessors separated by the / character, for example: /A/B/C/D. An XPath can be absolute (i.e., it starts with /), or it can be relative to the current XPath location.

The following are possible values for an element accessor, which operates relative to the current location specified by the XPath accessors which proceed it in the overall XPath string:

Accessor Description
name The first element with a particular name. Can be *.
[i] The i-th element.
name[i] The i-th element with a particular name.
[last()] The last element.
[last()-i] The element i before the last element.
name[@attrname="attrvalue"]The first element with a particular name that contains the specified attribute-value pair.

Supports single and double quotes. (XML Only)

. The current element.
.. The parent element.
Note: XPath indices are 1-based.

XPath Examples

Assuming the following XML response:

<firstlevel>
  <one>value</one>
  <two>
    <item>first</item>
    <item>second</item>
  </two>
  <three>value three</three>
</firstlevel>

Or, alternatively, the following JSON response:

{
  "firstlevel": {
    "one": "value",
    "two": ["first", "second"],
    "three": "value three"
  }
}

Here are some examples of valid XPaths:

DescriptionXML XPath JSON XPath
Document root / /json
Specific element /firstlevel/one /json/firstlevel/one
i-th child /firstlevel/two/item[2]/json/firstlevel/two/[2]

This is not an exhaustive list by any means, but should provide a general idea of the possibilities.

XSubTree:   A snapshot of the current element in the document.

Provides the entirety of the current element (including its sub-elements).

The current element is specified via the XPath configuration setting. This configuration setting is read-only.

XText:   The text of the current element.

Provides the inner text of the current element.

The current element is specified in the XPath configuration setting. This configuration setting is read-only.

HTTP Config Settings

AcceptEncoding:   Used to tell the server which types of content encodings the client supports.

When AllowHTTPCompression is True, the component adds an Accept-Encoding header to the request being sent to the server. By default, this header's value is "gzip, deflate". This configuration setting allows you to change the value of the Accept-Encoding header. Note: The component only supports gzip and deflate decompression algorithms.

AllowHTTPCompression:   This property enables HTTP compression for receiving data.

This configuration setting enables HTTP compression for receiving data. When set to True (default), the component will accept compressed data. It then will uncompress the data it has received. The component will handle data compressed by both gzip and deflate compression algorithms.

When True, the component adds an Accept-Encoding header to the outgoing request. The value for this header can be controlled by the AcceptEncoding configuration setting. The default value for this header is "gzip, deflate".

The default value is True.

AllowHTTPFallback:   Whether HTTP/2 connections are permitted to fallback to HTTP/1.1.

This configuration setting controls whether HTTP/2 connections are permitted to fall back to HTTP/1.1 when the server does not support HTTP/2. This setting is applicable only when HTTPVersion is set to "2.0".

If set to True (default), the component will automatically use HTTP/1.1 if the server does not support HTTP/2. If set to False, the component raises an exception if the server does not support HTTP/2.

The default value is True.

Append:   Whether to append data to LocalFile.

This configuration setting determines whether data will be appended when writing to LocalFile. When set to True, downloaded data will be appended to LocalFile. This may be used in conjunction with Range to resume a failed download. This is applicable only when LocalFile is set. The default value is False.

Authorization:   The Authorization string to be sent to the server.

If the Authorization property contains a nonempty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

This property is provided so that the HTTP component can be extended with other security schemes in addition to the authorization schemes already implemented by the component.

The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

BytesTransferred:   Contains the number of bytes transferred in the response data.

This configuration setting returns the raw number of bytes from the HTTP response data, before the component processes the data, whether it is chunked or compressed. This returns the same value as the Transfer event, by BytesTransferred.

ChunkSize:   Specifies the chunk size in bytes when using chunked encoding.

This is applicable only when UseChunkedEncoding is True. This setting specifies the chunk size in bytes to be used when posting data. The default value is 16384.

CompressHTTPRequest:   Set to true to compress the body of a PUT or POST request.

If set to True, the body of a PUT or POST request will be compressed into gzip format before sending the request. The "Content-Encoding" header is also added to the outgoing request.

The default value is False.

EncodeURL:   If set to True the URL will be encoded by the component.

If set to True, the URL passed to the component will be URL encoded. The default value is False.

FollowRedirects:   Determines what happens when the server issues a redirect.

This option determines what happens when the server issues a redirect. Normally, the component returns an error if the server responds with an "Object Moved" message. If this property is set to 1 (always), the new URL for the object is retrieved automatically every time.

If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same; otherwise, the component raises an exception.

Note: Following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.

A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).

The default value is 0 (Never). In this case, redirects are never followed, and the component raises an exception instead.

Following are the valid options:

  • 0 - Never
  • 1 - Always
  • 2 - Same Scheme

GetOn302Redirect:   If set to True the component will perform a GET on the new location.

The default value is False. If set to True, the component will perform a GET on the new location. Otherwise, it will use the same HTTP method again.

HTTP2HeadersWithoutIndexing:   HTTP2 headers that should not update the dynamic header table with incremental indexing.

HTTP/2 servers maintain a dynamic table of headers and values seen over the course of a connection. Typically, these headers are inserted into the table through incremental indexing (also known as HPACK, defined in RFC 7541). To tell the component not to use incremental indexing for certain headers, and thus not update the dynamic table, set this configuration option to a comma-delimited list of the header names.

HTTPVersion:   The version of HTTP used by the component.

This property specifies the HTTP version used by the component. Possible values are as follows:

  • "1.0"
  • "1.1" (default)
  • "2.0"
  • "3.0"

When using HTTP/2 ("2.0"), additional restrictions apply. Please see the following notes for details.

HTTP/2 Notes

When using HTTP/2, a secure Secure Sockets Layer/Transport Layer Security (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/2 will result in an error.

If the server does not support HTTP/2, the component will automatically use HTTP/1.1 instead. This is done to provide compatibility without the need for any additional settings. To see which version was used, check NegotiatedHTTPVersion after calling a method. The AllowHTTPFallback setting controls whether this behavior is allowed (default) or disallowed.

HTTP/3 Notes

HTTP/3 is supported only in .NET and Java.

When using HTTP/3, a secure (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/3 will result in an error.

IfModifiedSince:   A date determining the maximum age of the desired document.

If this setting contains a nonempty string, an If-Modified-Since HTTP header is added to the request. The value of this header is used to make the HTTP request conditional: if the requested documented has not been modified since the time specified in the field, a copy of the document will not be returned from the server; instead, a 304 (not modified) response will be returned by the server and the component throws an exception

The format of the date value for IfModifiedSince is detailed in the HTTP specs. For example: Sat, 29 Oct 2017 19:43:31 GMT.

KeepAlive:   Determines whether the HTTP connection is closed after completion of the request.

If true, the component will not send the Connection: Close header. The absence of the Connection header indicates to the server that HTTP persistent connections should be used if supported. Note: Not all servers support persistent connections. If false, the connection will be closed immediately after the server response is received.

The default value for KeepAlive is false.

KerberosSPN:   The Service Principal Name for the Kerberos Domain Controller.

If the Service Principal Name on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, the Service Principal Name should be set here.

LogLevel:   The level of detail that is logged.

This configuration setting controls the level of detail that is logged through the Log event. Possible values are as follows:

0 (None) No events are logged.
1 (Info - default) Informational events are logged.
2 (Verbose) Detailed data are logged.
3 (Debug) Debug data are logged.

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

MaxRedirectAttempts:   Limits the number of redirects that are followed in a request.

When FollowRedirects is set to any value other than frNever, the component will follow redirects until this maximum number of redirect attempts are made. The default value is 20.

NegotiatedHTTPVersion:   The negotiated HTTP version.

This configuration setting may be queried after the request is complete to indicate the HTTP version used. When HTTPVersion is set to "2.0" (if the server does not support "2.0"), then the component will fall back to using "1.1" automatically. This setting will indicate which version was used.

OtherHeaders:   Other headers as determined by the user (optional).

This configuration setting can be set to a string of headers to be appended to the HTTP request headers.

The headers must follow the format "header: value" as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") .

Use this configuration setting with caution. If this configuration setting contains invalid headers, HTTP requests may fail.

This configuration setting is useful for extending the functionality of the component beyond what is provided.

ProxyAuthorization:   The authorization string to be sent to the proxy server.

This is similar to the Authorization configuration setting, but is used for proxy authorization. If this configuration setting contains a nonempty string, a Proxy-Authorization HTTP request header is added to the request. This header conveys proxy Authorization information to the server. If ProxyUser and ProxyPassword are specified, this value is calculated using the algorithm specified by ProxyAuthScheme.

ProxyAuthScheme:   The authorization scheme to be used for the proxy.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

ProxyPassword:   A password if authentication is to be used for the proxy.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

ProxyPort:   Port for the proxy server (default 80).

This configuration setting is provided for use by components that do not directly expose Proxy properties.

ProxyServer:   Name or IP address of a proxy server (optional).

This configuration setting is provided for use by components that do not directly expose Proxy properties.

ProxyUser:   A user name if authentication is to be used for the proxy.

This configuration setting is provided for use by components that do not directly expose Proxy properties.

SentHeaders:   The full set of headers as sent by the client.

This configuration setting returns the complete set of raw headers as sent by the client.

StatusCode:   The status code of the last response from the server.

This configuration setting contains the result code of the last response from the server.

StatusLine:   The first line of the last response from the server.

This setting contains the first line of the last response from the server. The format of the line will be [HTTP version] [Result Code] [Description].

TransferredData:   The contents of the last response from the server.

This configuration setting contains the contents of the last response from the server.

TransferredDataLimit:   The maximum number of incoming bytes to be stored by the component.

If TransferredDataLimit is set to 0 (default), no limits are imposed. Otherwise, this reflects the maximum number of incoming bytes that can be stored by the component.

TransferredHeaders:   The full set of headers as received from the server.

This configuration setting returns the complete set of raw headers as received from the server.

TransferredRequest:   The full request as sent by the client.

This configuration setting returns the full request as sent by the client. For performance reasons, the request is not normally saved. Set this configuration setting to ON before making a request to enable it. Following are examples of this request:

.NET Http http = new Http(); http.Config("TransferredRequest=on"); http.PostData = "body"; http.Post("http://someserver.com"); Console.WriteLine(http.Config("TransferredRequest")); C++ HTTP http; http.Config("TransferredRequest=on"); http.SetPostData("body", 5); http.Post("http://someserver.com"); printf("%s\r\n", http.Config("TransferredRequest"));

UseChunkedEncoding:   Enables or Disables HTTP chunked encoding for transfers.

If UseChunkedEncoding is set to True, the component will use HTTP-chunked encoding when posting, if possible. HTTP-chunked encoding allows large files to be sent in chunks instead of all at once. If set to False, the component will not use HTTP-chunked encoding. The default value is False.

Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding.

UseIDNs:   Whether to encode hostnames to internationalized domain names.

This configuration setting specifies whether hostnames containing non-ASCII characters are encoded to internationalized domain names. When set to True, if a hostname contains non-ASCII characters, it is encoded using Punycode to an IDN (internationalized domain name).

The default value is False and the hostname will always be used exactly as specified. Note: The CodePage setting must be set to a value capable of interpreting the specified host name. For instance, to specify UTF-8, set CodePage to 65001.

UseProxyAutoConfigURL:   Whether to use a Proxy auto-config file when attempting a connection.

This configuration specifies whether the component will attempt to use the Proxy auto-config URL when establishing a connection and ProxyAutoDetect is set to True.

When True (default), the component will check for the existence of a Proxy auto-config URL, and if found, will determine the appropriate proxy to use.

UserAgent:   Information about the user agent (browser).

This is the value supplied in the HTTP User-Agent header. The default setting is "IPWorks HTTP Component - www.nsoftware.com".

Override the default with the name and version of your software.

TCPClient Config Settings

ConnectionTimeout:   Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the component will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect:   Tells the component whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by components that do not directly expose Firewall properties.

FirewallHost:   Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallPassword:   Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallPort:   The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by components that do not directly expose Firewall properties.

FirewallType:   Determines the type of firewall to connect through.

The appropriate values are as follows:

0No firewall (default setting).
1Connect through a tunneling proxy. FirewallPort is set to 80.
2Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

FirewallUser:   A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the component raises an exception.

Note: This setting is provided for use by components that do not directly expose Firewall properties.

KeepAliveInterval:   The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime:   The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger:   When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the component returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime:   Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost:   The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

LocalPort:   The port in the local host where the component binds.

This must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength:   The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate:   The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList:   A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive:   Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay:   Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6:   Whether to use IPv6.

When set to 0 (default), the component will use IPv4 exclusively. When set to 1, the component will use IPv6 exclusively. To instruct the component to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:

0 IPv4 Only
1 IPv6 Only
2 IPv6 with IPv4 fallback

SSL Config Settings

LogSSLPackets:   Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this setting controls whether SSL packets should be logged. By default, this setting is False, as it is only useful for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this setting has no effect if SSLProvider is set to Platform.

OpenSSLCADir:   The path to a directory containing CA certificates.

This functionality is available only when the provider is OpenSSL.

The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). OpenSSL recommends to use the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCAFile:   Name of the file containing the list of CA's trusted by your application.

This functionality is available only when the provider is OpenSSL.

The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by

-----BEGIN CERTIFICATE-----

... (CA certificate in base64 encoding) ...

-----END CERTIFICATE-----

sequences. Before, between, and after the certificates text is allowed which can be used e.g. for descriptions of the certificates. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.

OpenSSLCipherList:   A string that controls the ciphers to be used by SSL.

This functionality is available only when the provider is OpenSSL.

The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".

OpenSSLPrngSeedData:   The data to seed the pseudo random number generator (PRNG).

This functionality is available only when the provider is OpenSSL.

By default OpenSSL uses the device file "/dev/urandom" to seed the PRNG and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.

ReuseSSLSession:   Determines if the SSL session is reused.

If set to true, the component will reuse the context if and only if the following criteria are met:

  • The target host name is the same.
  • The system cache entry has not expired (default timeout is 10 hours).
  • The application process that calls the function is the same.
  • The logon session is the same.
  • The instance of the component is the same.

SSLCACerts:   A newline separated list of CA certificate to use during SSL client authentication.

This setting specifies one or more CA certificates to be included in the request when performing SSL client authentication. Some servers require the entire chain, including CA certificates, to be presented when performing SSL client authentication. The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL:   Whether to check the Certificate Revocation List for the server certificate.

This setting specifies whether the component will check the Certificate Revocation List specified by the server certificate. If set to 1 or 2, the component will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The component will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component raises an exception.

When set to 0 (default) the CRL check will not be performed by the component. When set to 1, it will attempt to perform the CRL check, but will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCheckOCSP:   Whether to use OCSP to check the status of the server certificate.

This setting specifies whether the component will use OCSP to check the validity of the server certificate. If set to 1 or 2, the component will first obtain the OCSP URL from the server certificate's OCSP extension. The component will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the component raises an exception.

When set to 0 (default) the component will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is only supported in the Java, C#, and C++ editions. In the C++ edition, it is only supported on Windows operating systems.

SSLCipherStrength:   The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList config setting.

SSLEnabledCipherSuites:   The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the component will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when SSLProvider is set to Platform: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=CALG_AES_256"); obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES"); Possible values when SSLProvider is set to Platform include:

  • CALG_3DES
  • CALG_3DES_112
  • CALG_AES
  • CALG_AES_128
  • CALG_AES_192
  • CALG_AES_256
  • CALG_AGREEDKEY_ANY
  • CALG_CYLINK_MEK
  • CALG_DES
  • CALG_DESX
  • CALG_DH_EPHEM
  • CALG_DH_SF
  • CALG_DSS_SIGN
  • CALG_ECDH
  • CALG_ECDH_EPHEM
  • CALG_ECDSA
  • CALG_ECMQV
  • CALG_HASH_REPLACE_OWF
  • CALG_HUGHES_MD5
  • CALG_HMAC
  • CALG_KEA_KEYX
  • CALG_MAC
  • CALG_MD2
  • CALG_MD4
  • CALG_MD5
  • CALG_NO_SIGN
  • CALG_OID_INFO_CNG_ONLY
  • CALG_OID_INFO_PARAMETERS
  • CALG_PCT1_MASTER
  • CALG_RC2
  • CALG_RC4
  • CALG_RC5
  • CALG_RSA_KEYX
  • CALG_RSA_SIGN
  • CALG_SCHANNEL_ENC_KEY
  • CALG_SCHANNEL_MAC_KEY
  • CALG_SCHANNEL_MASTER_HASH
  • CALG_SEAL
  • CALG_SHA
  • CALG_SHA1
  • CALG_SHA_256
  • CALG_SHA_384
  • CALG_SHA_512
  • CALG_SKIPJACK
  • CALG_SSL2_MASTER
  • CALG_SSL3_MASTER
  • CALG_SSL3_SHAMD5
  • CALG_TEK
  • CALG_TLS1_MASTER
  • CALG_TLS1PRF
Example values when SSLProvider is set to Internal: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA"); obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA"); Possible values when SSLProvider is set to Internal include:
  • TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
  • TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
  • TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (Not Recommended)
  • TLS_DH_RSA_WITH_AES_256_GCM_SHA384 (Not Recommended)
  • TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (Not Recommended)
  • TLS_DH_DSS_WITH_AES_256_GCM_SHA384 (Not Recommended)
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_DSS_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_RC4_128_MD5
  • TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols) only the following cipher suites are supported:

  • TLS_AES_256_GCM_SHA384
  • TLS_CHACHA20_POLY1305_SHA256
  • TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols:   Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

TLS1.312288 (Hex 3000)
TLS1.23072 (Hex C00) (Default)
TLS1.1768 (Hex 300) (Default)
TLS1 192 (Hex C0) (Default)
SSL3 48 (Hex 30) [Platform Only]
SSL2 12 (Hex 0C) [Platform Only]

SSLEnabledProtocols - TLS 1.3 Notes

By default when TLS 1.3 is enabled the component will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions which are designed to run on Windows SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is only supported on Windows 11 / Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider) please be aware of the following notes:

  • The platform provider is only available on Windows 11 / Windows Server 2022 and up.
  • SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
  • If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2 the above restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the component when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

SSLEnableRenegotiation:   Whether the renegotiation_info SSL extension is supported.

This setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This setting is true by default, but can be set to false to disable the extension.

This setting is only applicable when SSLProvider is set to Internal.

SSLIncludeCertChain:   Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

SSLKeyLogFile:   The location of a file where per-session secrets are written for debugging purposes.

This setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the component will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffice for debugging purposes. When writing to this file the component will only append, it will not overwrite previous values.

Note: This setting is only applicable when SSLProvider is set to Internal.

SSLNegotiatedCipher:   Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength:   Returns the negotiated cipher suite strength.

Returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g.TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite:   Returns the negotiated cipher suite.

Returns the cipher suite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange:   Returns the negotiated key exchange algorithm.

Returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength:   Returns the negotiated key exchange algorithm strength.

Returns the strenghth of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedVersion:   Returns the negotiated protocol version.

Returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g. TCPServer) this is a per-connection setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLSecurityFlags:   Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

0x00000001Ignore time validity status of certificate.
0x00000002Ignore time validity status of CTL.
0x00000004Ignore non-nested certificate times.
0x00000010Allow unknown Certificate Authority.
0x00000020Ignore wrong certificate usage.
0x00000100Ignore unknown certificate revocation status.
0x00000200Ignore unknown CTL signer revocation status.
0x00000400Ignore unknown Certificate Authority revocation status.
0x00000800Ignore unknown Root revocation status.
0x00008000Allow test Root certificate.
0x00004000Trust test Root certificate.
0x80000000Ignore non-matching CN (certificate CN not-matching server name).

This functionality is currently not available when the provider is OpenSSL.

SSLServerCACerts:   A newline separated list of CA certificate to use during SSL server certificate validation.

This setting optionally specifies one or more CA certificates to be used when verifying the server certificate. When verifying the server's certificate the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This setting should only be set if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this setting is a newline (CrLf) separated list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

TLS12SignatureAlgorithms:   Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the component will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the component raises an exception.

The format of this value is a comma separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups:   The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)

TLS13KeyShareGroups:   The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448"
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1"
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096"
  • "ffdhe_6144"
  • "ffdhe_8192"

TLS13SignatureAlgorithms:   The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

  • "ed25519" (default)
  • "ed448" (default)
  • "ecdsa_secp256r1_sha256" (default)
  • "ecdsa_secp384r1_sha384" (default)
  • "ecdsa_secp521r1_sha512" (default)
  • "rsa_pkcs1_sha256" (default)
  • "rsa_pkcs1_sha384" (default)
  • "rsa_pkcs1_sha512" (default)
  • "rsa_pss_sha256" (default)
  • "rsa_pss_sha384" (default)
  • "rsa_pss_sha512" (default)
The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.
TLS13SupportedGroups:   The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448" (default)
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096" (default)
  • "ffdhe_6144" (default)
  • "ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout:   Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

FirewallData:   Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

InBufferSize:   The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize:   The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the component is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage:   The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

IdentifierName
037IBM EBCDIC - U.S./Canada
437OEM - United States
500IBM EBCDIC - International
708Arabic - ASMO 708
709Arabic - ASMO 449+, BCON V4
710Arabic - Transparent Arabic
720Arabic - Transparent ASMO
737OEM - Greek (formerly 437G)
775OEM - Baltic
850OEM - Multilingual Latin I
852OEM - Latin II
855OEM - Cyrillic (primarily Russian)
857OEM - Turkish
858OEM - Multilingual Latin I + Euro symbol
860OEM - Portuguese
861OEM - Icelandic
862OEM - Hebrew
863OEM - Canadian-French
864OEM - Arabic
865OEM - Nordic
866OEM - Russian
869OEM - Modern Greek
870IBM EBCDIC - Multilingual/ROECE (Latin-2)
874ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875IBM EBCDIC - Modern Greek
932ANSI/OEM - Japanese, Shift-JIS
936ANSI/OEM - Simplified Chinese (PRC, Singapore)
949ANSI/OEM - Korean (Unified Hangul Code)
950ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026IBM EBCDIC - Turkish (Latin-5)
1047IBM EBCDIC - Latin 1/Open System
1140IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141IBM EBCDIC - Germany (20273 + Euro symbol)
1142IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144IBM EBCDIC - Italy (20280 + Euro symbol)
1145IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147IBM EBCDIC - France (20297 + Euro symbol)
1148IBM EBCDIC - International (500 + Euro symbol)
1149IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201Unicode UCS-2 Big-Endian
1250ANSI - Central European
1251ANSI - Cyrillic
1252ANSI - Latin I
1253ANSI - Greek
1254ANSI - Turkish
1255ANSI - Hebrew
1256ANSI - Arabic
1257ANSI - Baltic
1258ANSI/OEM - Vietnamese
1361Korean (Johab)
10000MAC - Roman
10001MAC - Japanese
10002MAC - Traditional Chinese (Big5)
10003MAC - Korean
10004MAC - Arabic
10005MAC - Hebrew
10006MAC - Greek I
10007MAC - Cyrillic
10008MAC - Simplified Chinese (GB 2312)
10010MAC - Romania
10017MAC - Ukraine
10021MAC - Thai
10029MAC - Latin II
10079MAC - Icelandic
10081MAC - Turkish
10082MAC - Croatia
12000Unicode UCS-4 Little-Endian
12001Unicode UCS-4 Big-Endian
20000CNS - Taiwan
20001TCA - Taiwan
20002Eten - Taiwan
20003IBM5550 - Taiwan
20004TeleText - Taiwan
20005Wang - Taiwan
20105IA5 IRV International Alphabet No. 5 (7-bit)
20106IA5 German (7-bit)
20107IA5 Swedish (7-bit)
20108IA5 Norwegian (7-bit)
20127US-ASCII (7-bit)
20261T.61
20269ISO 6937 Non-Spacing Accent
20273IBM EBCDIC - Germany
20277IBM EBCDIC - Denmark/Norway
20278IBM EBCDIC - Finland/Sweden
20280IBM EBCDIC - Italy
20284IBM EBCDIC - Latin America/Spain
20285IBM EBCDIC - United Kingdom
20290IBM EBCDIC - Japanese Katakana Extended
20297IBM EBCDIC - France
20420IBM EBCDIC - Arabic
20423IBM EBCDIC - Greek
20424IBM EBCDIC - Hebrew
20833IBM EBCDIC - Korean Extended
20838IBM EBCDIC - Thai
20866Russian - KOI8-R
20871IBM EBCDIC - Icelandic
20880IBM EBCDIC - Cyrillic (Russian)
20905IBM EBCDIC - Turkish
20924IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932JIS X 0208-1990 & 0121-1990
20936Simplified Chinese (GB2312)
21025IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027Extended Alpha Lowercase
21866Ukrainian (KOI8-U)
28591ISO 8859-1 Latin I
28592ISO 8859-2 Central Europe
28593ISO 8859-3 Latin 3
28594ISO 8859-4 Baltic
28595ISO 8859-5 Cyrillic
28596ISO 8859-6 Arabic
28597ISO 8859-7 Greek
28598ISO 8859-8 Hebrew
28599ISO 8859-9 Latin 5
28605ISO 8859-15 Latin 9
29001Europa 3
38598ISO 8859-8 Hebrew
50220ISO 2022 Japanese with no halfwidth Katakana
50221ISO 2022 Japanese with halfwidth Katakana
50222ISO 2022 Japanese JIS X 0201-1989
50225ISO 2022 Korean
50227ISO 2022 Simplified Chinese
50229ISO 2022 Traditional Chinese
50930Japanese (Katakana) Extended
50931US/Canada and Japanese
50933Korean Extended and Korean
50935Simplified Chinese Extended and Simplified Chinese
50936Simplified Chinese
50937US/Canada and Traditional Chinese
50939Japanese (Latin) Extended and Japanese
51932EUC - Japanese
51936EUC - Simplified Chinese
51949EUC - Korean
51950EUC - Traditional Chinese
52936HZ-GB2312 Simplified Chinese
54936Windows XP: GB18030 Simplified Chinese (4 Byte)
57002ISCII Devanagari
57003ISCII Bengali
57004ISCII Tamil
57005ISCII Telugu
57006ISCII Assamese
57007ISCII Oriya
57008ISCII Kannada
57009ISCII Malayalam
57010ISCII Gujarati
57011ISCII Punjabi
65000Unicode UTF-7
65001Unicode UTF-8
The following is a list of valid code page identifiers for Mac OS only:
IdentifierName
1ASCII
2NEXTSTEP
3JapaneseEUC
4UTF8
5ISOLatin1
6Symbol
7NonLossyASCII
8ShiftJIS
9ISOLatin2
10Unicode
11WindowsCP1251
12WindowsCP1252
13WindowsCP1253
14WindowsCP1254
15WindowsCP1250
21ISO2022JP
30MacOSRoman
10UTF16String
0x90000100UTF16BigEndian
0x94000100UTF16LittleEndian
0x8c000100UTF32String
0x98000100UTF32BigEndian
0x9c000100UTF32LittleEndian
65536Proprietary

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
  • Last Valid Build: The last valid build number for which the license will work.
MaskSensitive:   Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseFIPSCompliantAPI:   Tells the component whether or not to use FIPS certified APIs.

When set to true, the component will utilize the underlying operating system's certified APIs. Java editions, regardless of OS, utilize Bouncy Castle FIPS, while all the other Windows editions make use of Microsoft security libraries.

FIPS mode can be enabled by setting the UseFIPSCompliantAPI configuration setting to true. This is a static setting which applies to all instances of all components of the toolkit within the process. It is recommended to enable or disable this setting once before the component has been used to establish a connection. Enabling FIPS while an instance of the component is active and connected may result in unexpected behavior.

For more details please see the FIPS 140-2 Compliance article.

Note: This setting is only applicable on Windows.

Note: Enabling FIPS-compliance requires a special license; please contact sales@nsoftware.com for details.

UseInternalSecurityAPI:   Whether or not to use the system security libraries or an internal implementation.

When set to false, the component will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to true tells the component to use the internal implementation instead of using the system security libraries.

This setting is set to false by default on all platforms.

Trappable Errors (GoogleDrive Component)

Common Errors

600   A server error occurred, and/or the component was unable to process the server's response. Please refer to the error message for more information.
601   An unsupported operation or action was attempted.
602   The RawRequest or RawResponse configuration setting was queried without first setting the TransferredRequest configuration setting to ON.
603   The login credentials specified were invalid. Please refer to the error message for more information.
604   An invalid remote resource identifier (i.e., a name, path, Id, etc.) was specified.
605   An invalid index was specified.
606   An upload was aborted by the user before it could finish.
607   The specified resource is a folder and cannot be downloaded.
608   A download failed because the specified LocalFile already exists and Overwrite is false.
609   The component could not resume a download or upload. Please refer to the error message for more information.
610   An encrypted download could not be resumed because the DownloadTempFile configuration setting is not set.
611   An exception occurred while working with the specified LocalFile (or the current value of LocalFile is invalid). Please refer to the error message for more information.
612   An exception occurred while working with the specified upload or download stream. Please refer to the error message for more information.

The component may also return one of the following error codes, which are inherited from other components.

HTTP Errors

118   Firewall Error. Error description contains detailed message.
143   Busy executing current method.
151   HTTP protocol error. The error message has the server response.
152   No server specified in URL
153   Specified URLScheme is invalid.
155   Range operation is not supported by server.
156   Invalid cookie index (out of range).
301   Interrupted.
302   Can't open AttachedFile.

The component may also return one of the following error codes, which are inherited from other components.

TCPClient Errors

100   You cannot change the RemotePort at this time. A connection is in progress.
101   You cannot change the RemoteHost (Server) at this time. A connection is in progress.
102   The RemoteHost address is invalid (0.0.0.0).
104   Already connected. If you want to reconnect, close the current connection first.
106   You cannot change the LocalPort at this time. A connection is in progress.
107   You cannot change the LocalHost at this time. A connection is in progress.
112   You cannot change MaxLineLength at this time. A connection is in progress.
116   RemotePort cannot be zero. Please specify a valid service port number.
117   You cannot change the UseConnection option while the component is active.
135   Operation would block.
201   Timeout.
211   Action impossible in control's present state.
212   Action impossible while not connected.
213   Action impossible while listening.
301   Timeout.
302   Could not open file.
434   Unable to convert string to selected CodePage.
1105   Already connecting. If you want to reconnect, close the current connection first.
1117   You need to connect first.
1119   You cannot change the LocalHost at this time. A connection is in progress.
1120   Connection dropped by remote host.

SSL Errors

270   Cannot load specified security library.
271   Cannot open certificate store.
272   Cannot find specified certificate.
273   Cannot acquire security credentials.
274   Cannot find certificate chain.
275   Cannot verify certificate chain.
276   Error during handshake.
280   Error verifying certificate.
281   Could not find client certificate.
282   Could not find server certificate.
283   Error encrypting data.
284   Error decrypting data.

TCP/IP Errors

10004   [10004] Interrupted system call.
10009   [10009] Bad file number.
10013   [10013] Access denied.
10014   [10014] Bad address.
10022   [10022] Invalid argument.
10024   [10024] Too many open files.
10035   [10035] Operation would block.
10036   [10036] Operation now in progress.
10037   [10037] Operation already in progress.
10038   [10038] Socket operation on non-socket.
10039   [10039] Destination address required.
10040   [10040] Message too long.
10041   [10041] Protocol wrong type for socket.
10042   [10042] Bad protocol option.
10043   [10043] Protocol not supported.
10044   [10044] Socket type not supported.
10045   [10045] Operation not supported on socket.
10046   [10046] Protocol family not supported.
10047   [10047] Address family not supported by protocol family.
10048   [10048] Address already in use.
10049   [10049] Can't assign requested address.
10050   [10050] Network is down.
10051   [10051] Network is unreachable.
10052   [10052] Net dropped connection or reset.
10053   [10053] Software caused connection abort.
10054   [10054] Connection reset by peer.
10055   [10055] No buffer space available.
10056   [10056] Socket is already connected.
10057   [10057] Socket is not connected.
10058   [10058] Can't send after socket shutdown.
10059   [10059] Too many references, can't splice.
10060   [10060] Connection timed out.
10061   [10061] Connection refused.
10062   [10062] Too many levels of symbolic links.
10063   [10063] File name too long.
10064   [10064] Host is down.
10065   [10065] No route to host.
10066   [10066] Directory not empty
10067   [10067] Too many processes.
10068   [10068] Too many users.
10069   [10069] Disc Quota Exceeded.
10070   [10070] Stale NFS file handle.
10071   [10071] Too many levels of remote in path.
10091   [10091] Network subsystem is unavailable.
10092   [10092] WINSOCK DLL Version out of range.
10093   [10093] Winsock not loaded yet.
11001   [11001] Host not found.
11002   [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
11003   [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
11004   [11004] Valid name, no data record (check DNS setup).