Linode Class

Properties   Methods   Events   Config Settings   Errors  

The Linode class provides an easy way to interface with Linode's Object Storage service.

Syntax

cloudstorage.linode()

Remarks

The Linode Object Storage service has an API that is compatible with that of Amazon S3, allowing you to store arbitrary data using the same bucket-and-object paradigm that S3 uses.

To use the Linode class, you will first need to sign up for the Linode Object Storage service and obtain an AccessKey and a SecretKey. Then you can start creating buckets in your account using CreateBucket. The buckets are place holders for your objects allowing you to access them by http URLs. You can then add objects to any of your buckets using CreateObject.

There are other methods such as ListBuckets, ListObjects, GetObject, GetLink, DeleteObject etc. that further enable you to manage your data store.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

Linode.AccessKey Property

The access key to use for authentication.

Syntax

getAccessKey(): string;
setAccessKey(accessKey: string): void;

Default Value

""

Remarks

This property specifies the access key that should be used for authentication. Both this property and SecretKey must be set before attempting any operations which connect to the server.

Linode.AccessPolicy Property

The canned access policy to apply to a bucket or object.

Syntax

getAccessPolicy(): LinodeAccessPolicies;
setAccessPolicy(accessPolicy: LinodeAccessPolicies): void;

enum LinodeAccessPolicies {
  ptPrivate,
  ptPublicRead,
  ptPublicReadWrite,
  ptAuthenticatedRead,
  ptBucketOwnerRead,
  ptBucketOwnerFullControl,
  ptNone
}

Default Value

0

Remarks

This property specifies the canned access policy that should be applied to a bucket or object when one of the following methods is called:

• CopyObject (for the destination object)
• CreateBucket
• CreateObject
• StartMultipartUpload
• UpdateBucketACL
• UpdateObjectACL

Valid values are:

Linode.Bucket Property

Selects a bucket.

Syntax

getBucket(): string;
setBucket(bucket: string): void;

Default Value

""

Remarks

This property selects a bucket, by name, for the class to operate against. It must be set before attempting most operations.

Linode.Buckets Property

A collection of buckets.

Syntax

getBuckets(): S3BucketList;

Default Value

Remarks

This collection holds a list of S3Bucket items.

Calling ListBuckets will populate this collection.

This property is read-only and not available at design time.

Linode.ContentDisposition Property

Content disposition to send for an object.

Syntax

getContentDisposition(): string;
setContentDisposition(contentDisposition: string): void;

Default Value

""

Remarks

This property can be set before calling CreateObject to have its value submitted as the object's Content-Disposition header value. This same value will then be returned in the Content-Disposition header by the server anytime the object is downloaded.

This property is not available at design time.

Linode.ContentType Property

Content type to send for an object.

Syntax

getContentType(): string;
setContentType(contentType: string): void;

Default Value

""

Remarks

This property can be set before calling CreateObject to have its value submitted as the object's Content-Type header value. This same value will then be returned in the Content-Type header by the server anytime the object is downloaded.

This property is not available at design time.

Linode.EncryptionAlgorithm Property

The encryption algorithm.

Syntax

getEncryptionAlgorithm(): LinodeEncryptionAlgorithms;
setEncryptionAlgorithm(encryptionAlgorithm: LinodeEncryptionAlgorithms): void;

enum LinodeEncryptionAlgorithms {
  eaAES,
  eaBlowfish,
  eaCAST,
  eaDES,
  eaIDEA,
  eaRC2,
  eaRC4,
  eaTEA,
  eaTripleDES,
  eaTwofish,
  eaRijndael,
  eaChaCha,
  eaXSalsa20
}

Default Value

0

Remarks

This property specifies the encryption algorithm to be used. The maximum allowable key size is automatically used for the selected algorithm. Possible values are:

Linode.EncryptionPassword Property

The encryption password.

Syntax

getEncryptionPassword(): string;
setEncryptionPassword(encryptionPassword: string): void;

Default Value

""

Remarks

If this property is populated when UploadFile or DownloadFile is called, the class will attempt to encrypt or decrypt the data before uploading or after downloading it.

The class uses the value specified here to generate the necessary encryption Key and IV values using the PKCS5 password digest algorithm. This provides a simpler alternative to creating and managing Key and IV values directly.

However, it is also possible to explicitly specify the Key and IV values to use by setting the EncryptionKey and EncryptionIV configuration settings. This may be necessary if, e.g., the data needs to be encrypted/decrypted by another utility which generates Key and IV values differently.

This property is not available at design time.

Linode.Firewall Property

A set of properties related to firewall access.

Syntax

getFirewall(): Firewall;
setFirewall(firewall: Firewall): void;

Default Value

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the class will attempt to connect.

Linode.FollowRedirects Property

Determines what happens when the server issues a redirect.

Syntax

getFollowRedirects(): LinodeFollowRedirects;
setFollowRedirects(followRedirects: LinodeFollowRedirects): void;

enum LinodeFollowRedirects {
  frNever,
  frAlways,
  frSameScheme
}

Default Value

0

Remarks

This property specifies how the class should behave when the server returns a redirect response (e.g. "Object Moved"). Valid values are:

Linode.Idle Property

The current status of the class.

Syntax

isIdle(): boolean;

Default Value

TRUE

Remarks

This property will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.

This property is read-only.

Linode.LocalFile Property

The location of the local file.

Syntax

getLocalFile(): string;
setLocalFile(localFile: string): void;

Default Value

""

Remarks

This property specifies the location of a file on disk. This is used as the source file when calling CreateObject or UploadPart; and as the destination file when calling GetObject.

Linode.LocalHost Property

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

getLocalHost(): string;
setLocalHost(localHost: string): void;

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Linode.Metadata Property

A collection of metadata items.

Syntax

getMetadata(): S3MetadataList;
setMetadata(metadata: S3MetadataList): void;

Default Value

Remarks

This collection holds a list of S3Metadata items.

This collection is populated when GetObjectInfo is called; and its items are used anytime CreateObject, CopyObject, or StartMultipartUpload is called.

This property is not available at design time.

Linode.ObjectData Property

The data that was downloaded, or that should be uploaded.

Syntax

getObjectData(): Uint8Array;
setObjectData(objectData: Uint8Array): void;

Default Value

""

Remarks

This property is populated with object data after calling GetObject if LocalFile is not set.

This property can also be set before calling CreateObject or UploadPart; its data will be uploaded if LocalFile is not set.

This property is not available at design time.

Linode.ObjectDelimiter Property

The delimiter string to use when listing objects.

Syntax

getObjectDelimiter(): string;
setObjectDelimiter(objectDelimiter: string): void;

Default Value

""

Remarks

If this property is non-empty when ListObjects or ListVersions is called, any objects (or object versions) whose names contain the same string between the specified ObjectPrefix and the first occurrence of the specified delimiter that follow will be rolled up into a "common prefix" element, which is returned in place of the individual objects themselves.

The PrefixList event will fire once for each common prefix returned. If the StorePrefixList configuration setting is enabled, the class will also populate the PrefixCount and Prefix[i] configuration settings

Object Hierarchy Traversal

By using the ObjectDelimiter and ObjectPrefix properties in tandem, applications can effectively "traverse" a virtual hierarchy of objects (or object versions) as if it were a filesystem. For example, assume that objects with the following names exist within a bucket:

• MyCompany/
• MyCompany/Department1/
• MyCompany/Department2/
• MyCompany/Department2/EmployeeA
• MyCompany/Department2/EmployeeB

With ObjectDelimiter set to /, we can set ObjectPrefix to successively "deeper" values before calling ListObjects or ListVersions for the following effect:

This property is not available at design time.

Linode.ObjectMarker Property

A marker indicating what page of objects to return next.

Syntax

getObjectMarker(): string;
setObjectMarker(objectMarker: string): void;

Default Value

""

Remarks

This property will be populated when ListObjects is called if the results are paged and there are more pages. To list all objects, continue to call ListObjects until this property returns empty string.

Refer to ListObjects for more information.

This property is not available at design time.

Linode.ObjectPrefix Property

A prefix used to restrict the results returned when listing objects.

Syntax

getObjectPrefix(): string;
setObjectPrefix(objectPrefix: string): void;

Default Value

""

Remarks

This property, if non-empty, is used to restrict the results returned by ListObjects (or ListVersions) to only the objects (or object versions) whose names begin with the given value.

Object Hierarchy Traversal

By using the ObjectDelimiter and ObjectPrefix properties in tandem, applications can effectively "traverse" a virtual hierarchy of objects (or object versions) as if it were a filesystem. For example, assume that objects with the following names exist within a bucket:

• MyCompany/
• MyCompany/Department1/
• MyCompany/Department2/
• MyCompany/Department2/EmployeeA
• MyCompany/Department2/EmployeeB

With ObjectDelimiter set to /, we can set ObjectPrefix to successively "deeper" values before calling ListObjects or ListVersions for the following effect:

This property is not available at design time.

Linode.Objects Property

A collection of objects.

Syntax

getObjects(): S3ObjectList;

Default Value

Remarks

This collection holds a list of S3Object items.

Calling GetObjectInfo, ListObjects, ListVersions, or ListMultipartUploads will populate this collection.

This property is read-only and not available at design time.

Linode.OtherHeaders Property

Other headers as determined by the user (optional).

Syntax

getOtherHeaders(): string;
setOtherHeaders(otherHeaders: string): void;

Default Value

""

Remarks

This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like ContentType and From.

The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by .

Use this property with caution. If this property contains invalid headers, HTTP requests may fail.

This property is useful for extending the functionality of the class beyond what is provided.

This property is not available at design time.

Linode.Overwrite Property

Determines if local files are overwritten.

Syntax

isOverwrite(): boolean;
setOverwrite(overwrite: boolean): void;

Default Value

FALSE

Remarks

This property controls whether local files are overwritten when calling GetObject. It is only applicable to local files. The default value is false.

Linode.ParsedHeaders Property

This property includes a collection of headers returned from the last request.

Syntax

getParsedHeaders(): HeaderList;

Default Value

Remarks

This property contains a collection of headers returned from the last request. Whenever headers are returned from the server, the headers are parsed into a collection of headers. Each Header in this collection contains information describing that header.

MaxHeaders can be used to control the maximum number of headers saved.

This property is read-only and not available at design time.

Linode.PartMarker Property

A marker indicating what page of parts to return next.

Syntax

getPartMarker(): string;
setPartMarker(partMarker: string): void;

Default Value

""

Remarks

This property will be populated when ListParts is called if the results are paged and there are more pages. To list all parts, continue to call ListParts until this property returns empty string.

Refer to ListParts for more information.

This property is not available at design time.

Linode.Parts Property

A collection of multipart upload parts.

Syntax

getParts(): S3PartList;

Default Value

Remarks

This collection holds a list of S3Part items.

Calling ListParts will populate this collection.

This property is read-only and not available at design time.

Linode.Proxy Property

A set of properties related to proxy access.

Syntax

getProxy(): Proxy;
setProxy(proxy: Proxy): void;

Default Value

Remarks

This property contains fields describing the proxy through which the class will attempt to connect.

Linode.QueryParams Property

Additional query parameters to be included in the request.

Syntax

getQueryParams(): QueryParamList;
setQueryParams(queryParams: QueryParamList): void;

Default Value

Remarks

This is a collection of query parameters that will be added to the request. Parameters can be added via the AddQueryParam method.

Linode.Range Property

The range of bytes to request.

Syntax

getRange(): string;
setRange(range: string): void;

Default Value

""

Remarks

This property specifies the range of bytes to request from the server. If this property is non-empty when a GetObject request is being constructed, a header like Range: bytes=Range will be added to the request, with Range substituted with the specified value.

There are two valid formats for this property's value:

• StartByte-
• StartByte-EndByte

Note: If the StartByte property is greater than zero when GetObject is called (i.e., when a download is being resumed), and this property is non-empty, the class will automatically advance the StartByte value in the specified range by StartByte bytes when sending the Range header to the server. This ensures that the previously-downloaded data at the start of the specified range is not downloaded again when the download is resumed.

This property is not available at design time.

Linode.Region Property

The region the class will make requests against.

Syntax

getRegion(): string;
setRegion(region: string): void;

Default Value

"us-east-1"

Remarks

This property control which region the class will make requests against. By default the class uses us-east-1. This property should be changed to create or access resources in other regions.

Regions:

Important: Each "region" supported by Linode's Object Storage service is actually a completely standalone storage cluster. These clusters do not interact with each other in any way, which causes the following non-standard behaviors:

• Bucket names may be reused in each region (however, they must still be "globally" unique within each region).
• The ListBuckets method will only return buckets located in the currently-selected region; there is no way to retrieve a list of all regions' buckets.
• Similarly, the BucketExists and GetBucketLocation methods only consider buckets located in the currently-selected region.
• The CopyObject method cannot be used to copy objects to a bucket in another region.

The class will always convert this property's value to lowercase. If this property is cleared, the class will reset it to the default value.

Linode.SecretKey Property

The secret key to use for authentication.

Syntax

getSecretKey(): string;
setSecretKey(secretKey: string): void;

Default Value

""

Remarks

This property specifies the secret key that should be used for authentication. Both this property and AccessKey must be set before attempting any operations which connect to the server.

Linode.SSLAcceptServerCert Property

Instructs the class to unconditionally accept the server certificate that matches the supplied certificate.

Syntax

getSSLAcceptServerCert(): Certificate;
setSSLAcceptServerCert(SSLAcceptServerCert: Certificate): void;

Default Value

Remarks

If it finds any issues with the certificate presented by the server, the class will normally terminate the connection with an error.

You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

Note: This functionality is provided only for cases in which you otherwise know that you are communicating with the right server. If used improperly, this property may create a security breach. Use it at your own risk.

Linode.SSLCert Property

The certificate to be used during Secure Sockets Layer (SSL) negotiation.

Syntax

getSSLCert(): Certificate;
setSSLCert(SSLCert: Certificate): void;

Default Value

Remarks

This property includes the digital certificate that the class will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the field to the encoded certificate. To select a certificate, use the store and subject fields.

Linode.SSLProvider Property

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

getSSLProvider(): LinodeSSLProviders;
setSSLProvider(SSLProvider: LinodeSSLProviders): void;

enum LinodeSSLProviders {
  sslpAutomatic,
  sslpPlatform,
  sslpInternal
}

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected, the platform implementation will be used by default in all cases in the JavaScript edition.

Note: The internal provider is not support at this time.

Linode.SSLServerCert Property

The server certificate for the last established connection.

Syntax

getSSLServerCert(): Certificate;

Default Value

Remarks

This property contains the server certificate for the last established connection.

SSLServerCert is reset every time a new connection is attempted.

This property is read-only.

Linode.StartByte Property

The byte offset from which to resume the upload or download.

Syntax

getStartByte(): number;
setStartByte(startByte: number): void;

Default Value

0

Remarks

This property specifies the byte offset from which to resume an automatic multipart upload initiated by CreateObject, or a download initiated by GetObject. Refer to those methods' documentation for more information about resuming uploads and downloads.

This property is not available at design time.

Linode.Timeout Property

The timeout for the class.

Syntax

getTimeout(): number;
setTimeout(timeout: number): void;

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the class .

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Linode.UseVirtualHosting Property

Determines which style request to use.

Syntax

isUseVirtualHosting(): boolean;
setUseVirtualHosting(useVirtualHosting: boolean): void;

Default Value

TRUE

Remarks

If set to true (default), buckets will be referenced in the request using the hosted-style request: http://yourbucket.us-east-1.linodeobjects.com/yourobject. If false, the class will use the path-style request: http://us-east-1.linodeobjects.com/yourbucket/yourobject.

Note: When set to true, there are more limitations when choosing a bucket name due to DNS server naming restrictions.

This property is not available at design time.

Linode.VersionId Property

The object version to make requests against.

Syntax

getVersionId(): string;
setVersionId(versionId: string): void;

Default Value

""

Remarks

This property can be set to the Id of a specific object version before calling the following methods in order to make requests against the specified object version instead of the base object; refer to each one's documentation for more information:

• CopyObject (to copy from a specific object version)
• DeleteObject
• GetLink (to build a link for a specific object version)
• GetObject
• GetObjectInfo
• SendCustomRequest
• UpdateObjectACL

Refer to Amazon's Versioning documentation for more information about versioning.

This property is not available at design time.

Linode.VersionMarker Property

A marker indicating what page of object versions to return next.

Syntax

getVersionMarker(): string;
setVersionMarker(versionMarker: string): void;

Default Value

""

Remarks

This property will be populated when ListVersions is called if the results are paged and there are more pages. To list all object versions, continue to call ListVersions until this property returns empty string.

Refer to ListVersions for more information.

This property is not available at design time.

Linode.abortMultipartUpload Method

Aborts a multipart upload.

Syntax

async linode.abortMultipartUpload(objectName : string, uploadId : string): Promise<void>

Remarks

This method aborts the multipart upload of the object named ObjectName specified by UploadId.

When this method is called, all parts that have been uploaded for the multipart upload are deleted from the server. (Note that if any part uploads are currently in progress, it may be necessary to call this method again after they complete.)

If this method is called successfully, the specified UploadId will no longer be valid.

Linode.addMetadata Method

Adds a metadata item to the Metadata properties.

Syntax

async linode.addMetadata(name : string, value : string): Promise<void>

Remarks

This method adds a metadata item to the Metadata properties. Name specifies the name of the item, and Value specifies the value of the item. Keep in mind that the server stores metadata names in lowercase.

If Name begins with a service-specific metadata (e.g., x-amz-meta-, x-goog-meta-, etc.), it will be stripped off. The class will take care of prepending it when sending metadata to the server.

Linode.addQueryParam Method

Adds a query parameter to the QueryParams properties.

Syntax

async linode.addQueryParam(name : string, value : string): Promise<void>

Remarks

This method is used to add a query parameter to the QueryParams properties. Name specifies the name of the parameter, and Value specifies the value of the parameter.

All specified Values will be URL encoded by the class automatically. Consult the service documentation for details on the available parameters.

Linode.bucketExists Method

Checks whether the bucket exists.

Syntax

async linode.bucketExists(): Promise<boolean>

Remarks

This method checks whether the bucket specified by Bucket exists, returning true if so or false if not.

Note: This method only considers buckets located in the currently-selected Region. Refer to the Region property's documentation for more information.

Linode.checkVersioningEnabled Method

Checks whether versioning is enabled for the currently selected bucket.

Syntax

async linode.checkVersioningEnabled(): Promise<boolean>

Remarks

This method can be used to check whether the bucket currently selected by Bucket has versioning enabled.

Note that if Bucket is empty, or refers to a bucket that does not exist, this method will always return false when queried.

Refer to Amazon's Versioning documentation for more information about versioning.

Linode.completeMultipartUpload Method

Completes a multipart upload by assembling previously uploaded parts.

Syntax

async linode.completeMultipartUpload(objectName : string, uploadId : string): Promise<void>

Remarks

This method completes the multipart upload specified by UploadId. The server will assemble all of the parts that have been uploaded into an object named ObjectName.

Note that this method automatically calls ListParts internally to obtain the information needed to complete the multipart upload. This process does not alter the Parts properties, nor does it cause the PartList event to fire.

Linode.config Method

Sets or retrieves a configuration setting.

Syntax

async linode.config(configurationString : string): Promise<string>

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Linode.copyObject Method

Copies an object.

Syntax

async linode.copyObject(srcObjectName : string, destBucket : string, destObjectName : string): Promise<void>

Remarks

This method copies the object specified by SrcObjectName (in the bucket currently selected by Bucket) to the object specified by DestObjectName in DestBucket. If DestBucket is empty, the bucket specified by Bucket is used as the destination bucket.

If the VersionId property is non-empty, the specified version of the source object will be used as the copy source. In this case, DestObjectName may be the same as SrcObjectName to "promote" the version, copying its contents back to the base object.

If there are any metadata items present in the Metadata properties, they will set on the destination object; otherwise, the server will copy any metadata items present on the source object to the destination object.

Notes:

• Objects may only be copied to buckets that exist within the same region.
• Objects larger than 5GB cannot be copied using this method. To copy such objects, start a new multipart upload for the destination object using StartMultipartUpload, and then use the CopyPart method to create parts for said multipart upload using the source object's data.

Linode.copyPart Method

Copies the specified object as a part of a multipart upload.

Syntax

async linode.copyPart(srcObjectName : string, destBucket : string, destObjectName : string, destPartNumber : number, destUploadId : string): Promise<void>

Remarks

This method copies data from the object specified by SrcObjectName (in the bucket currently selected by Bucket) to a new multipart upload part for DestObjectName in DestBucket.

The DestPartNumber and DestUploadId parameters should be used in the same manner as the UploadPart method's PartNumber and UploadId parameters.

To copy a specific range of bytes from the source object, set the CopyPartRange configuration setting before calling this method.

Linode.createBucket Method

Creates a new bucket.

Syntax

async linode.createBucket(): Promise<void>

Remarks

This method creates a new bucket using the name specified by the Bucket property. The bucket is created in the region specified by the Region property.

Linode.createObject Method

Creates a new object in the currently selected bucket.

Syntax

async linode.createObject(objectName : string): Promise<void>

Remarks

This method creates a new object named Object in the bucket currently selected by Bucket. If there are any metadata items present in the Metadata properties, they will included in the creation request.

If LocalFile is set the file will be uploaded from the specified path. If LocalFile is not set the data in ObjectData will be used.

To encrypt the file before uploading it, set EncryptionAlgorithm and EncryptionPassword.

This method can automatically handle the multipart upload of objects (See Below). If it is desired to manually take control of the multipart upload process see StartMultipartUpload.

Automatic Multipart Uploads

If more than SimpleUploadLimit bytes of data are provided, the class will automatically perform a multipart upload by splitting the data up into parts (sized according to the FragmentSize configuration setting) and uploading them individually. To accomplish this, the class automatically makes calls to StartMultipartUpload, UploadPart, and CompleteMultipartUpload internally; tracks upload state information using the ResumableUploadState configuration setting; and tracks how much data has been uploaded using the StartByte property. The FragmentComplete event will fire after each part is uploaded.

If, during an automatic multipart upload, any individual request fails, the upload can be resumed be calling this method again with the same parameters, so long as ResumableUploadState and StartByte contain the same values as they did when the upload was interrupted.

When an automatic multipart upload completes successfully, ResumableUploadState is cleared and StartByte is reset to 0.

Linode.deleteBucket Method

Deletes a bucket.

Syntax

async linode.deleteBucket(): Promise<void>

Remarks

This method deletes the bucket currently selected by Bucket. Note that bucket names share a global namespace, and it may not be possible to recreate a deleted bucket if its name has been taken by another user in the meantime.

Linode.deleteObject Method

Deletes an object.

Syntax

async linode.deleteObject(objectName : string): Promise<void>

Remarks

This method deletes the object specified by ObjectName in the bucket currently selected by Bucket.

If the VersionId property is non-empty, this method deletes the specified version of the object instead.

Deleting Versioned Objects

If an object's latest version is a delete marker, then the server treats the object as if it didn't exist (i.e., it doesn't appear when listing objects, cannot be downloaded, etc.). However, all of the previous versions of the object (including one that existed just before the delete marker was created) still exist; they can be listed using ListVersions, and explicitly interacted with by setting VersionId and calling an appropriate method.

To permanently delete objects in a versioning-enabled bucket, each version of the object must be explicitly deleted by setting VersionId before calling this method. This includes any delete marker versions, which can be deleted like any other version.

Refer to Amazon's Deleting Object Versions, Working with Delete Markers, and Removing Delete Markers articles for more information.

Linode.disableVersioning Method

Disables versioning for the currently selected bucket.

Syntax

async linode.disableVersioning(): Promise<void>

Remarks

This method can be used to disable versioning for the bucket currently selected by Bucket.

Refer to Amazon's Versioning documentation for more information about versioning.

Linode.doEvents Method

This method processes events from the internal message queue.

Syntax

async linode.doEvents(): Promise<void>

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Linode.enableVersioning Method

Enables versioning for the currently selected bucket.

Syntax

async linode.enableVersioning(): Promise<void>

Remarks

This method can be used to enable versioning for the bucket currently selected by Bucket.

Refer to Amazon's Versioning documentation for more information about versioning.

Linode.getBucketLocation Method

Gets a bucket's location.

Syntax

async linode.getBucketLocation(): Promise<string>

Remarks

This method retrieves and returns the location (i.e., region) of the bucket currently selected by Bucket.

Note: This method only considers buckets located in the currently-selected Region. Refer to the Region property's documentation for more information.

Linode.getLink Method

Creates a link that provides access to an object for a specified amount of time.

Syntax

async linode.getLink(objectName : string, expires : number): Promise<string>

Remarks

This method creates and returns a pre-authenticated link that provides access to the object specified by ObjectName in the bucket currently selected by Bucket. If the VersionId property is non-empty, a link is created for the specified version of the object.

The Expires parameter specifies how many seconds the link should be valid for. The maximum validity period is seven days.

Note that this method is an offline method that simply generates a pre-signed URL; no communication with the server takes place.

Linode.getObject Method

Downloads an object.

Syntax

async linode.getObject(objectName : string): Promise<void>

Remarks

This methods downloads the object specified by ObjectName in the bucket currently selected by Bucket. If the VersionId property is non-empty, the specified version of the object is downloaded instead. The Range property can be used to download a specific range of bytes from the object.

If LocalFile is set, the object data will be saved to the specified location; otherwise, the object data will be held by ObjectData.

To download and decrypt an encrypted object, set EncryptionAlgorithm and EncryptionPassword before calling this method.

Download Notes

In the simplest use-case, downloading an object looks like this: s3.LocalFile = "../MyData.zip"; s3.GetObject(s3.Objects[0].Name);

Resuming Downloads

The class also supports resuming failed downloads by using the StartByte property. If a download is interrupted, set StartByte to the appropriate offset before calling this method to resume the download. string downloadFile = "../MyData.zip"; s3.LocalFile = downloadFile; s3.GetObject(s3.Objects[0].Name); //The transfer is interrupted and GetObject() above fails. Later, resume the download: //Get the size of the partially downloaded file s3.StartByte = new FileInfo(downloadFile).Length; s3.GetObject(s3.Objects[0].Name);

Resuming Encrypted File Downloads

Resuming encrypted file downloads is only supported when LocalFile was set in the initial download attempt.

If LocalFile is set when beginning an encrypted download, the class creates a temporary file in TempPath to hold the encrypted data until the download is complete. If the download is interrupted, DownloadTempFile will be populated with the path of the temporary file that holds the partial data.

To resume, DownloadTempFile must be populated, along with StartByte, to allow the remainder of the encrypted data to be downloaded. Once the encrypted data is downloaded it will be decrypted and written to LocalFile. s3.LocalFile = "../MyData.zip"; s3.EncryptionPassword = "password"; s3.GetObject(s3.Objects[0].Name); //The transfer is interrupted and GetObject() above fails. Later, resume the download: //Get the size of the partially downloaded temp file s3.StartByte = new FileInfo(s3.Config("DownloadTempFile")).Length; s3.GetObject(s3.Objects[0].Name);

Linode.getObjectInfo Method

Gets an object's information and metadata.

Syntax

async linode.getObjectInfo(objectName : string): Promise<void>

Remarks

This method gets information and metadata for the object specified by Object in the bucket currently selected by Bucket. If the VersionId property is non-empty, information and metadata for the specified version of the object is retrieved instead.

Calling this method will fire the ObjectList and MetadataList events, and will re-populate the Objects and Metadata collection properties.

Linode.interrupt Method

This method interrupts the current method.

Syntax

async linode.interrupt(): Promise<void>

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

Linode.listBuckets Method

Lists all buckets in the currently-selected region.

Syntax

async linode.listBuckets(): Promise<void>

Remarks

This method lists all buckets in the currently-selected Region. (Due to the architecture of the Linode Object Storage service, there is no way to retrieve a list of all regions' buckets; refer to the Region property for more information.)

Calling this method will fire the BucketList event once for each bucket, and will also populate the Buckets properties.

Linode.listMultipartUploads Method

Lists the current multipart uploads.

Syntax

async linode.listMultipartUploads(): Promise<void>

Remarks

This method lists the current multipart uploads in the bucket currently selected by Bucket.

Before calling this method, the ObjectPrefix property may be set in order to restrict the results to only the multipart uploads whose names begin with a given string. The ObjectDelimiter property can also be used to further tune the results returned. The MaxObjects configuration setting may be used to limit the number of results returned.

Calling this method will fire the ObjectList event once for each multipart upload, and will also populate the Objects properties.

If there are still more multipart uploads available to list when this method returns, the ObjectMarker property will be populated. Continue to call this method until ObjectMarker is empty to accumulate all pages of results in the Objects properties. Alternatively, the AccumulatePages configuration setting can be disabled to clear the Objects properties every time a page of results is returned.

Linode.listObjects Method

Lists the objects in a bucket.

Syntax

async linode.listObjects(): Promise<void>

Remarks

This method lists the objects in the bucket currently selected by Bucket.

Before calling this method, the ObjectPrefix property may be set in order to restrict the results to only the objects whose names begin with a given string. The ObjectDelimiter property can also be used to further tune the results returned. The MaxObjects configuration setting may be used to limit the number of results returned.

Calling this method will fire the ObjectList event once for each object, and will also populate the Objects properties. It may also fire the PrefixList event, and populate the PrefixCount and Prefix[i] configuration settings, depending on how the properties discussed above are set.

If there are still more objects available to list when this method returns, the ObjectMarker property will be populated. Continue to call this method until ObjectMarker is empty to accumulate all pages of results in the Objects properties. Alternatively, the AccumulatePages configuration setting can be disabled to clear the Objects properties every time a page of results is returned.

Object Hierarchy Traversal

By using the ObjectDelimiter and ObjectPrefix properties in tandem, applications can effectively "traverse" a virtual hierarchy of objects (or object versions) as if it were a filesystem. For example, assume that objects with the following names exist within a bucket:

• MyCompany/
• MyCompany/Department1/
• MyCompany/Department2/
• MyCompany/Department2/EmployeeA
• MyCompany/Department2/EmployeeB

With ObjectDelimiter set to /, we can set ObjectPrefix to successively "deeper" values before calling ListObjects or ListVersions for the following effect:

Linode.listParts Method

Lists the parts in a multipart upload.

Syntax

async linode.listParts(objectName : string, uploadId : string): Promise<void>

Remarks

This method lists the parts in the multipart upload of ObjectName specified by UploadId. The MaxParts configuration setting may be used to limit the number of results returned.

Calling this method will fire the PartList event once for each part, and will also populate the Parts properties.

If there are still more parts available to list when this method returns, the PartMarker property will be populated. Continue to call this method until PartMarker is empty to accumulate all pages of results in the Parts properties. Alternatively, the AccumulatePages configuration setting can be disabled to clear the Parts properties every time a page of results is returned.

Note that this method does not need to be called before attempting to complete a multipart upload with CompleteMultipartUpload; the class will automatically collect the necessary information internally. Refer to CompleteMultipartUpload for more information.

Linode.listVersions Method

Lists the object versions in a bucket.

Syntax

async linode.listVersions(): Promise<void>

Remarks

This method lists the object versions in the bucket currently selected by Bucket.

Before calling this method, the ObjectPrefix property may be set in order to restrict the results to only the object versions whose names begin with a given string. The ObjectDelimiter property can also be used to further tune the results returned. The MaxObjects configuration setting may be used to limit the number of results returned.

Calling this method will fire the ObjectList event once for each object version, and will also populate the Objects properties. It may also fire the PrefixList event, and populate the PrefixCount and Prefix[i] configuration settings, depending on how the properties discussed above are set.

If there are still more object versions available to list when this method returns, the VersionMarker property will be populated. Continue to call this method until VersionMarker is empty to accumulate all pages of results in the Objects properties. Alternatively, the AccumulatePages configuration setting can be disabled to clear the Objects properties every time a page of results is returned.

Object Hierarchy Traversal

By using the ObjectDelimiter and ObjectPrefix properties in tandem, applications can effectively "traverse" a virtual hierarchy of objects (or object versions) as if it were a filesystem. For example, assume that objects with the following names exist within a bucket:

• MyCompany/
• MyCompany/Department1/
• MyCompany/Department2/
• MyCompany/Department2/EmployeeA
• MyCompany/Department2/EmployeeB

With ObjectDelimiter set to /, we can set ObjectPrefix to successively "deeper" values before calling ListObjects or ListVersions for the following effect:

Linode.reset Method

Resets the class to its initial state.

Syntax

async linode.reset(): Promise<void>

Remarks

This method resets the class to its initial state.

Linode.resetHeaders Method

Resets all HTTP headers, cookies, and LocalFile.

Syntax

async linode.resetHeaders(): Promise<void>

Remarks

Resets all the HTTP headers as well as LocalFile to "" (empty string), and clears the Metadata and QueryParams collection properties.

Call this method before creating a new request, so that headers and query parameters from the previous request are not carried over to the next one.

Linode.sendCustomRequest Method

Sends a custom request to the server.

Syntax

async linode.sendCustomRequest(httpMethod : string, objectName : string, requestBody : string): Promise<void>

Remarks

This method can be used to send arbitrary requests to the server.

Valid values for HttpMethod are:

• GET (default if empty)
• HEAD
• POST
• PUT
• DELETE

The ObjectName and RequestBody parameters may be empty if not needed.

Usage

When this method is called, the class does the following:

1. Builds a request URL, including query parameters, based on the following:
   • UseSSL, Region, and UseVirtualHosting for the base URL.
     • Alternatively, if a custom URL has been specified using the URL configuration setting, it is used directly, and these properties are ignored.
   • Bucket (if non-empty)
   • ObjectName (if non-empty)
   • VersionId (if both it and ObjectName are non-empty)
   • QueryParams
2. Adds request headers from:
   • ContentDisposition
   • ContentType
   • OtherHeaders
   • ProductToken
   • SessionToken
   • UserToken
3. Signs the request (unless the SignCustomRequest configuration setting is disabled).
4. Sends the request, including RequestBody if non-empty.
5. Stores the response headers in the ParsedHeaders properties; and the response body in the specified LocalFile, or ObjectData (using the same logic as GetObject).

If the response body is XML data, the XPath, XText, and other X* configuration settings can then be used to navigate and extract information from it.

Linode.startMultipartUpload Method

Starts a new manual multipart upload.

Syntax

async linode.startMultipartUpload(objectName : string): Promise<string>

Remarks

This method starts a new "manual" multipart upload for an object named ObjectName, in the bucket currently selected by Bucket, and returns the upload Id that the server associates with it. For an "automatic" multipart upload see the CreateObject method. This upload Id can then be used to call the following methods:

• UploadPart
• CopyPart
• ListParts
• CompleteMultipartUpload
• AbortMultipartUpload

If there are any metadata items present in the Metadata properties, they will be included in the creation request, and will be applied to the final object after the multipart upload is completed with CompleteMultipartUpload.

Multipart uploads never expire, they must be explicitly completed or aborted using CompleteMultipartUpload or AbortMultipartUpload. The ListMultipartUploads method can be used to retrieve a list of current multipart uploads.

Linode.updateBucketACL Method

Updates a bucket's canned access policy.

Syntax

async linode.updateBucketACL(): Promise<void>

Remarks

This method updates the canned access policy of the bucket selected by Bucket to the value specified by AccessPolicy

Linode.updateObjectACL Method

Updates an object's canned access policy.

Syntax

async linode.updateObjectACL(objectName : string): Promise<void>

Remarks

This method updates the caned access policy of the objects specified by ObjectName, in the bucket currently selected by Bucket, to the value specified by AccessPolicy.

If the VersionId property is non-empty, the canned access policy of the specified version of the object is updated instead.

Linode.uploadPart Method

Uploads a multipart upload part.

Syntax

async linode.uploadPart(objectName : string, partNumber : number, uploadId : string): Promise<void>

Remarks

This method uploads a part for the multipart upload of the object named ObjectName specified by UploadId.

PartNumber specifies the part's number; it must be a value in the range 1 to 10000, inclusive. If a part with the given number already exists in the specified multipart upload, it is replaced with the newly-uploaded part.

The data to upload is taken from either LocalFile or ObjectData (whichever data is found in first, when checked in that order). Each part must be at least 5MB in size, except for the last part in the overall multipart upload, which can be any non-zero size.

If the IncludePartMD5 configuration setting is true, the class will include an MD5 digest of its data when sending it to the server. The server will then verify that the data was received without corruption.

Linode.BucketList Event

Fires once for each bucket returned when listing buckets.

Syntax

linode.on('BucketList', listener: (e: {readonly bucketName: string, readonly creationDate: string, readonly ownerId: string, readonly ownerName: string}) => void )

Remarks

This event fires once for each bucket returned when ListBuckets is called.

BucketName reflects the name of the bucket.

CreationDate reflects the bucket's creation date.

OwnerId and OwnerName reflect the Id and display name of the bucket's owner, respectively.

Linode.EndTransfer Event

This event fires when a document finishes transferring.

Syntax

linode.on('EndTransfer', listener: (e: {readonly direction: number}) => void )

Remarks

The EndTransfer event is fired when the document text finishes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Linode.Error Event

Fired when information is available about errors during data delivery.

Syntax

linode.on('Error', listener: (e: {readonly errorCode: number, readonly description: string}) => void )

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class .

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Linode.FragmentComplete Event

Fires after each part in an automatic multipart upload is complete.

Syntax

linode.on('FragmentComplete', listener: (e: {readonly fragmentNumber: number, readonly fragmentCount: number, interrupt: boolean}) => void )

Remarks

If, when CreateObject is called, more than SimpleUploadLimit bytes of upload data are present, the class will automatically split the upload data up into parts and perform a multipart upload. During the overall upload process, this event will fire after each part is uploaded, providing an indication of overall upload progress.

FragmentNumber is the number of the current part that has completed. This value starts at 1.

FragmentCount is the total number of parts that will be uploaded.

Interrupt can be set to true to interrupt the upload. The upload may be resumed later.

Refer to CreateObject for more information.

Linode.Header Event

Fired every time a header line comes in.

Syntax

linode.on('Header', listener: (e: {readonly field: string, readonly value: string}) => void )

Remarks

The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

Linode.Log Event

Fired once for each log message.

Syntax

linode.on('Log', listener: (e: {readonly logLevel: number, readonly message: string, readonly logType: string}) => void )

Remarks

This event is fired once for each log message generated by the class. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of message. Possible values are as follows:

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

Message is the log entry.

LogType identifies the type of log entry. Possible values are as follows:

• "Info"
• "RequestHeaders"
• "ResponseHeaders"
• "RequestBody"
• "ResponseBody"
• "ProxyRequest"
• "ProxyResponse"
• "FirewallRequest"
• "FirewallResponse"

Linode.MetadataList Event

Fires once for each metadata item returned when object information and metadata is retrieved.

Syntax

linode.on('MetadataList', listener: (e: {readonly name: string, readonly value: string}) => void )

Remarks

This event fires once for each metadata item returned when GetObjectInfo is called.

Name is the name of the metadata item, without the service-specific prefix (e.g., x-amz-meta-, x-goog-meta-, etc.). Keep in mind that the server stores metadata names in lowercase.

Value is the metadata item's value.

Linode.ObjectList Event

Fires once for each object, object version, or multipart upload returned when listing such items.

Syntax

linode.on('ObjectList', listener: (e: {readonly bucketName: string, readonly objectName: string, readonly lastModified: string, readonly size: number, readonly ETag: string, readonly ownerId: string, readonly ownerName: string, readonly uploadId: string, readonly versionId: string, readonly latestVersion: boolean, readonly deleted: boolean}) => void )

Remarks

This event fires once for each object, object version, or multipart upload returned when GetObjectInfo, ListObjects, ListVersions, or ListMultipartUploads is called.

BucketName reflects the name of the bucket that the object is in.

ObjectName reflects the name of the object.

LastModified reflects the last modified time of the object. Not applicable when ListMultipartUploads is called.

Size reflects the size, in bytes, of the object. Not applicable when ListMultipartUploads is called.

ETag reflects the object's ETag. Not applicable when ListMultipartUploads is called.

OwnerId and OwnerName reflect the Id and display name of the object's owner, respectively. Not applicable when GetObjectInfo is called.

UploadId reflects the Id of the multipart upload. Only applicable when ListMultipartUploads is called.

VersionId reflects the Id of the object version (note that the string null is a valid version Id). Only applicable when ListVersions is called, or when GetObjectInfo is called while VersionId is non-empty; empty in all other cases.

LatestVersion indicates whether this is the latest object version. Only applicable when ListVersions is called; true in all other cases.

Deleted indicates whether this object version is a delete marker (refer to DeleteObject for more information). Only applicable when ListVersions is called, or when GetObjectInfo is called while VersionId is non-empty; false in all other cases.

Linode.PartList Event

Fires once for every part returned when listing a multipart upload's parts.

Syntax

linode.on('PartList', listener: (e: {readonly partNumber: number, readonly objectName: string, readonly lastModified: string, readonly size: number, readonly ETag: string, readonly ownerId: string, readonly ownerName: string}) => void )

Remarks

This event fires once for each multipart upload part returned when ListParts is called.

PartNumber reflects the part's number.

ObjectName reflects the name of the object the multipart upload is for.

LastModified reflects the last modified time of the part.

Size reflects the size, in bytes, of the part.

ETag reflects the part's ETag of the part.

OwnerId and OwnerName reflect the Id and display name of the part's owner, respectively.

Linode.PrefixList Event

Fires once for each common prefix returned when listing objects.

Syntax

linode.on('PrefixList', listener: (e: {readonly bucketName: string, readonly prefix: string}) => void )

Remarks

This event fires once for each common prefix returned when ListObjects or ListVersions is called when ObjectDelimiter is non-empty. Refer to ObjectDelimiter for more information.

BucketName reflects the name of the bucket that the prefix is in.

Prefix is the common prefix.

Linode.Progress Event

Fires during an upload or download to indicate transfer progress.

Syntax

linode.on('Progress', listener: (e: {readonly direction: number, readonly bytesTransferred: number, readonly totalBytes: number, readonly percentDone: number}) => void )

Remarks

This event fires during an upload or download to indicate the progress of the transfer of the entire request. By default, this event will fire each time PercentDone increases by one percent; the ProgressStep configuration setting can be used to alter this behavior.

Direction indicates whether the transfer is an upload (0) or a download (1).

BytesTransferred reflects the number of bytes that have been transferred so far, or 0 if the transfer is starting (however, see note below).

TotalBytes reflects the total number of bytes that are to be transferred, or -1 if the total is unknown. This amount includes the size of everything in the request like HTTP headers.

PercentDone reflects the overall progress of the transfer, or -1 if the progress cannot be calculated.

Note: By default, the class tracks transfer progress absolutely. If a transfer is interrupted and later resumed, the values reported by this event upon and after resumption will account for the data that was transferred before the interruption.

For example, if 10MB of data was successfully transferred before the interruption, then this event will fire with a BytesTransferred value of 10485760 (10MB) when the transfer is first resumed, and then continue to fire with successively greater values as usual.

This behavior can be changed by disabling the ProgressAbsolute configuration setting, in which case the class will treat resumed transfers as "new" transfers. In this case, the BytesTransferred parameter will always be 0 the first time this event fires, regardless of whether the transfer is new or being resumed.

Linode.SSLServerAuthentication Event

Fired after the server presents its certificate to the client.

Syntax

linode.on('SSLServerAuthentication', listener: (e: {readonly certEncoded: string, readonly certEncodedB: Uint8Array, readonly certSubject: string, readonly certIssuer: string, readonly status: string, accept: boolean}) => void )

Remarks

This event fires with information about the server certificate. The Status property shows why verification failed (otherwise, Status contains the string OK). To manually accept an untrusted certificate, the SSLAcceptAnyServerCert setting must be set to True before initiating the connection.

Linode.SSLStatus Event

Fired when secure connection progress messages are available.

Syntax

linode.on('SSLStatus', listener: (e: {readonly message: string}) => void )

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

Linode.StartTransfer Event

This event fires when a document starts transferring (after the headers).

Syntax

linode.on('StartTransfer', listener: (e: {readonly direction: number}) => void )

Remarks

The StartTransfer event is fired when the document text starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Linode.Transfer Event

Fired while a document transfers (delivers document).

Syntax

linode.on('Transfer', listener: (e: {readonly direction: number, readonly bytesTransferred: number, readonly percentDone: number, readonly text: string, readonly textB: Uint8Array}) => void )

Remarks

The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.

The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

Constructors

public Certificate();

public Certificate(String certificateFile);

public Certificate(byte[] encoded);

public Certificate(int storeType, String store, String storePassword, String subject);

public Certificate(int storeType, String store, String storePassword, String subject, String configurationString);

public Certificate(int storeType, String store, String storePassword, byte[] encoded);

public Certificate(int storeType, byte[] store, String storePassword, String subject);

public Certificate(int storeType, byte[] store, String storePassword, String subject, String configurationString);

public Certificate(int storeType, byte[] store, String storePassword, byte[] encoded);

Firewall Type

The firewall the class will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall and the .

Fields

Constructors

public Firewall();

Header Type

This is an HTTP header as it is received from the server.

Remarks

When a header is received through a Header event, it is parsed into a Header type. This type contains a , and its corresponding .

Fields

Constructors

public Header();

public Header(String field, String value);

Proxy Type

The proxy the class will connect to.

Remarks

When connecting through a proxy, this type is used to specify different properties of the proxy, such as the and the .

Fields

Constructors

public Proxy();

public Proxy(String server, int port);

public Proxy(String server, int port, String user, String password);

QueryParam Type

A query parameter to send in the request.

Remarks

This type represents a query parameter to send in the request.

Fields

Constructors

public QueryParam();

public QueryParam(String name, String value);

S3Bucket Type

This type represents a bucket.

Remarks

This type represents a bucket.

Fields

Constructors

public S3Bucket();

public S3Bucket(String name, String creationDate, String ownerId, String ownerDisplayName);

S3Metadata Type

This type represents Amazon's Simple Storage Service (S3) metadata item.

Remarks

This type represents an S3 metadata item.

Fields

Constructors

public S3Metadata();

public S3Metadata(String name, String value);

S3Object Type

This type represents an object.

Remarks

This type represents an object.

Fields

Constructors

public S3Object();

public S3Object(String name, String lastModified, long size, String storageClass, String ETag, String ownerId, String ownerDisplayName, String uploadId);

S3Part Type

This type represents a multipart upload part.

Remarks

This type represents a multipart upload part.

Fields

Constructors

public S3Part();

public S3Part(int partNumber, String objectName, String lastModified, long size, String ETag, String ownerId, String ownerDisplayName);

Config Settings (class cloudstorage.linode)

Linode Config Settings

<firstlevel>
  <one>value</one>
  <two>
    <item>first</item>
    <item>second</item>
  </two>
  <three>value three</three>
</firstlevel>

{
  "firstlevel": {
    "one": "value",
    "two": ["first", "second"],
    "three": "value three"
  }
}

HTTP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

Trappable Errors (class cloudstorage.linode)

Common Errors

HTTP Errors

TCPClient Errors

SSL Errors

TCP/IP Errors