SSHAuth Control

Properties Methods Events Config Settings Errors

The SSHAuth control provides a simple way to authenticate a user against an SSH server.

Syntax

SSHAuth

Remarks

The SSHAuth control offers a simply way to authenticate a user against an SSH server.

To begin specify the SSHHost, User, and Password. Next call Authenticate to authenticate the user.

The control supports multiple authentication methods including public key authentication, keyboard interactive authentication, password authentication, and more. Set AuthMode to the desired authentication mechanism before calling Authenticate.

Property List

The following is the full list of the properties of the control with short descriptions. Click on the links for further details.


AuthMode	The authentication method to be used the control when calling Authenticate .
FirewallAutoDetect	This property tells the control whether or not to automatically detect and use firewall system settings, if available.
FirewallType	This property determines the type of firewall to connect through.
FirewallHost	This property contains the name or IP address of firewall (optional).
FirewallPassword	This property contains a password if authentication is to be used when connecting through the firewall.
FirewallPort	This property contains the transmission control protocol (TCP) port for the firewall Host .
FirewallUser	This property contains a user name if authentication is to be used connecting through a firewall.
LocalHost	The name of the local host or user-assigned IP interface through which connections are initiated or accepted.
LocalPort	The TCP port in the local host where the control binds.
Password	The password for SSH password-based authentication.
SSHAcceptServerHostKeyEncoded	This is the certificate (PEM/base64 encoded).
SSHCertEncoded	This is the certificate (PEM/base64 encoded).
SSHCertStore	This is the name of the certificate store for the client certificate.
SSHCertStorePassword	If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSHCertStoreType	This is the type of certificate store for this certificate.
SSHCertSubject	This is the subject of the certificate used for client authentication.
SSHEncryptionAlgorithms	A comma-separated list containing all allowable encryption algorithms.
SSHHost	The address of the SSH host.
SSHPort	The port on the SSH server where the SSH service is running; by default, 22.
Timeout	A timeout for the control.
User	The username for SSH authentication.

Method List

The following is the full list of the methods of the control with short descriptions. Click on the links for further details.


Authenticate	Authenticates the user.
Config	Sets or retrieves a configuration setting.
DoEvents	Processes events from the internal message queue.
Interrupt	Interrupt the current method.
Reset	Resets the control.

Event List

The following is the full list of the events fired by the control with short descriptions. Click on the links for further details.


Connected	This event is fired immediately after a connection completes (or fails).
ConnectionStatus	This event is fired to indicate changes in the connection state.
Disconnected	This event is fired when a connection is closed.
Error	Information about errors during data delivery.
Log	Fires once for each log message.
SSHCustomAuth	Fired when the control is doing custom authentication.
SSHKeyboardInteractive	Fired when the control receives a request for user input from the server.
SSHServerAuthentication	Fired after the server presents its public key to the client.
SSHStatus	Shows the progress of the secure connection.

Config Settings

The following is a list of config settings for the control with short descriptions. Click on the links for further details.


SSHCompressionAlgorithms	A comma-separated list containing all allowable compression algorithms.
ChannelDataEOL[ChannelId]	Used to break the incoming data stream into chunks.
ChannelDataEOLFound[ChannelId]	Determines if ChannelDataEOL was found.
ClientSSHVersionString	The SSH version string used by the control.
EnablePageantAuth	Whether to use a key stored in Pageant to perform client authentication.
KerberosDelegation	If true, asks for credentials with delegation enabled during authentication.
KerberosRealm	The fully qualified domain name of the Kerberos Realm to use for GSSAPI authentication.
KerberosSPN	The Kerberos Service Principal Name of the SSH host.
KeyRenegotiationThreshold	Sets the threshold for the SSH Key Renegotiation.
LogLevel	Specifies the level of detail that is logged.
MaxChannelDataLength[ChannelId]	The maximum amount of data to accumulate when no ChannelDataEOL is found.
MaxPacketSize	The maximum packet size of the channel, in bytes.
MaxWindowSize	The maximum window size allowed for the channel, in bytes.
NegotiatedStrictKex	Returns whether strict key exchange was negotiated to be used.
PasswordPrompt	The text of the password prompt used in keyboard-interactive authentication.
PreferredDHGroupBits	The size (in bits) of the preferred modulus (p) to request from the server.
RecordLength	The length of received data records.
ServerSSHVersionString	The remote host's SSH version string.
SignedSSHCert	The CA signed client public key used when authenticating.
SSHAcceptAnyServerHostKey	If set the control will accept any key presented by the server.
SSHAcceptServerCAKey	The CA public key that signed the server's host key.
SSHAcceptServerHostKeyFingerPrint	The fingerprint of the server key to accept.
SSHFingerprintHashAlgorithm	The algorithm used to calculate the fingerprint.
SSHFingerprintMD5	The server hostkey's MD5 fingerprint.
SSHFingerprintSHA1	The server hostkey's SHA1 fingerprint.
SSHFingerprintSHA256	The server hostkey's SHA256 fingerprint.
SSHKeepAliveCountMax	The maximum number of keep alive packets to send without a response.
SSHKeepAliveInterval	The interval between keep alive packets.
SSHKeyExchangeAlgorithms	Specifies the supported key exchange algorithms.
SSHKeyRenegotiate	Causes the control to renegotiate the SSH keys.
SSHMacAlgorithms	Specifies the supported Mac algorithms.
SSHPubKeyAuthSigAlgorithms	Specifies the enabled signature algorithms that may be used when attempting public key authentication.
SSHPublicKeyAlgorithms	Specifies the supported public key algorithms for the server's public key.
SSHVersionPattern	The pattern used to match the remote host's version string.
TryAllAvailableAuthMethods	If set to true, the control will try all available authentication methods.
UseStrictKeyExchange	Specifies how strict key exchange is supported.
WaitForChannelClose	Whether to wait for channels to be closed before disconnected.
WaitForServerDisconnect	Whether to wait for the server to close the connection.
ConnectionTimeout	Sets a separate timeout value for establishing a connection.
FirewallAutoDetect	Tells the control whether or not to automatically detect and use firewall system settings, if available.
FirewallHost	Name or IP address of firewall (optional).
FirewallPassword	Password to be used if authentication is to be used when connecting through the firewall.
FirewallPort	The TCP port for the FirewallHost;.
FirewallType	Determines the type of firewall to connect through.
FirewallUser	A user name if authentication is to be used connecting through a firewall.
KeepAliveInterval	The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTime	The inactivity time in milliseconds before a TCP keep-alive packet is sent.
Linger	When set to True, connections are terminated gracefully.
LingerTime	Time in seconds to have the connection linger.
LocalHost	The name of the local host through which connections are initiated or accepted.
LocalPort	The port in the local host where the control binds.
MaxLineLength	The maximum amount of data to accumulate when no EOL is found.
MaxTransferRate	The transfer rate limit in bytes per second.
ProxyExceptionsList	A semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAlive	Determines whether or not the keep alive socket option is enabled.
TcpNoDelay	Whether or not to delay when sending packets.
UseIPv6	Whether to use IPv6.
AbsoluteTimeout	Determines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallData	Used to send extra data to the firewall.
InBufferSize	The size in bytes of the incoming queue of the socket.
OutBufferSize	The size in bytes of the outgoing queue of the socket.
CodePage	The system code page used for Unicode to Multibyte translations.
MaskSensitive	Whether sensitive data is masked in log messages.
UseInternalSecurityAPI	Tells the control whether or not to use the system security libraries or an internal implementation.

AuthMode Property (SSHAuth Control)

The authentication method to be used the control when calling Authenticate .

Syntax

sshauthcontrol.AuthMode[=integer]

Possible Values

amNone(0), 
amMultiFactor(1), 
amPassword(2), 
amPublicKey(3), 
amKeyboardInteractive(4), 
amGSSAPIWithMic(5), 
amCustom(6)

Default Value

Remarks

The SSH Authentication specification (RFC 4252) specifies multiple methods by which a user can be authenticated by an SSH server. When a call is made to Authenticate, the control will connect to the SSH server and establish the security layer. After the connection has been secured, the client will send an authentication request to the SSHHost containing the User. The server will respond containing a list of methods by which that user may be authenticated.

The control will attempt to authenticate the user by one of those methods based on the value of AuthMode and other property values supplied by the user. Currently, the control supports the following authentication methods:


`amNone` (0)	No authentication will be performed. The current User value is ignored, and the connection will be logged in as anonymous.
`amMultiFactor` (1)	This allows the control to attempt a multi-step authentication process. The control will send authentication data to the server based on the list of methods allowed for the current user and the authentication property values supplied. The control will continue to send authentication data until the server acknowledges authentication success. If the server rejects an authentication step, the control fails with an error.
`amPassword` (2)	The control will use the values of User and Password to authenticate the user.
`amPublicKey` (3)	The control will use the values of User and the SSHCert* properties to authenticate the user. the SSHCert* properties must have a private key available for this authentication method to succeed.
`amKeyboardInteractive` (4)	At the time of authentication, the control will fire the SSHKeyboardInteractive event containing instructions on how to complete the authentication step. (NOTE: `amKeyboardInteractive` is not supported in SSHTunnel).
`amGSSAPIWithMic` (5)	This allows the control to attempt Kerberos authentication using the GSSAPI-WITH-MIC scheme. The client will try Kerberos authentication using the value of User (single sign-on), or if Password is specified as well, it will try Kerberos authentication with alternate credentials. This is currently supported only on Windows, unless using the Java edition, which also provides support for Linux and macOS.
`amCustom` (6)	This allows the control caller to take over the authentication process completely. When amCustom is set, the control will fire the SSHCustomAuth event as necessary to complete the authentication process.
`amGSSAPIKeyex` (7)	This allows the control to attempt Kerberos authentication using the GSSAPIKeyex scheme. The client will try Kerberos authentication using the value of User (single sign-on), or if Password is specified as well, it will try Kerberos authentication with alternate credentials. This is currently supported only on Windows, unless using the Java edition, which also provides support for Linux and macOS.

Example (User/Password Auth): Control.SSHAuthMode = SshauthSSHAuthModes.amPassword Control.SSHUser = "username" Control.SSHPassword = "password" Control.SSHLogon("server", 22) Example (Public Key Auth): Control.SSHAuthMode = SshauthSSHAuthModes.amPublicKey Control.SSHUser = "username" Control.SSHCertStoreType = SSHCertStoreTypes.cstPFXFile; Control.SSHCertStore = "cert.pfx"; Control.SSHCertStorePassword = "certpassword"; Control.SSHCertSubject = "*"; Control.SSHLogon("server", 22)

Data Type

Integer

FirewallAutoDetect Property (SSHAuth Control)

This property tells the control whether or not to automatically detect and use firewall system settings, if available.

Syntax

sshauthcontrol.FirewallAutoDetect[=boolean]

Default Value

False

Remarks

This property tells the control whether or not to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (SSHAuth Control)

This property determines the type of firewall to connect through.

Syntax

sshauthcontrol.FirewallType[=integer]

Possible Values

fwNone(0), 
fwTunnel(1), 
fwSOCKS4(2), 
fwSOCKS5(3), 
fwSOCKS4A(10)

Default Value

Remarks

This property determines the type of firewall to connect through. The applicable values are as follows:


fwNone (0)	No firewall (default setting).
fwTunnel (1)	Connect through a tunneling proxy. FirewallPort is set to 80.
fwSOCKS4 (2)	Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
fwSOCKS5 (3)	Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
fwSOCKS4A (10)	Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Data Type

Integer

FirewallHost Property (SSHAuth Control)

This property contains the name or IP address of firewall (optional).

Syntax

sshauthcontrol.FirewallHost[=string]

Default Value

Remarks

This property contains the name or IP address of firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the control fails with an error.

Data Type

String

FirewallPassword Property (SSHAuth Control)

This property contains a password if authentication is to be used when connecting through the firewall.

Syntax

sshauthcontrol.FirewallPassword[=string]

Default Value

Remarks

This property contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the control fails with an error.

Data Type

String

FirewallPort Property (SSHAuth Control)

This property contains the transmission control protocol (TCP) port for the firewall Host .

Syntax

sshauthcontrol.FirewallPort[=integer]

Default Value

Remarks

This property contains the transmission control protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (SSHAuth Control)

This property contains a user name if authentication is to be used connecting through a firewall.

Syntax

sshauthcontrol.FirewallUser[=string]

Default Value

Remarks

This property contains a user name if authentication is to be used connecting through a firewall. If the FirewallHost is specified, this property and FirewallPassword properties are used to connect and authenticate to the given Firewall. If the authentication fails, the control fails with an error.

Data Type

String

LocalHost Property (SSHAuth Control)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

sshauthcontrol.LocalHost[=string]

Default Value

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the control initiate connections (or accept in the case of server controls) only through that interface.

If the control is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

LocalPort Property (SSHAuth Control)

The TCP port in the local host where the control binds.

Syntax

sshauthcontrol.LocalPort[=integer]

Default Value

Remarks

This property must be set before a connection is attempted. It instructs the control to bind to a specific port (or communication endpoint) in the local machine.

Setting this property to 0 (default) enables the system to choose an open port at random. The chosen port will be returned by the LocalPort property after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this property when a connection is active will generate an error.

This property is useful when trying to connect to services that require a trusted port in the client side.

Data Type

Integer

Password Property (SSHAuth Control)

The password for SSH password-based authentication.

Syntax

sshauthcontrol.Password[=string]

Default Value

Remarks

Password specifies the password which is used to authenticate the client to the SSH server.

Data Type

String

SSHAcceptServerHostKeyEncoded Property (SSHAuth Control)

This is the certificate (PEM/base64 encoded).

Syntax

sshauthcontrol.SSHAcceptServerHostKeyEncoded[=string]

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSHAcceptServerHostKeyStore and SSHAcceptServerHostKeySubject properties also may be used to specify a certificate.

When SSHAcceptServerHostKeyEncoded is set, a search is initiated in the current SSHAcceptServerHostKeyStore for the private key of the certificate. If the key is found, SSHAcceptServerHostKeySubject is updated to reflect the full subject of the selected certificate; otherwise, SSHAcceptServerHostKeySubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSHAcceptServerHostKeyEncodedB.

This property is not available at design time.

Data Type

Binary String

SSHCertEncoded Property (SSHAuth Control)

This is the certificate (PEM/base64 encoded).

Syntax

sshauthcontrol.SSHCertEncoded[=string]

Default Value

Remarks

This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSHCertStore and SSHCertSubject properties also may be used to specify a certificate.

When SSHCertEncoded is set, a search is initiated in the current SSHCertStore for the private key of the certificate. If the key is found, SSHCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSHCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSHCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSHCertStore Property (SSHAuth Control)

This is the name of the certificate store for the client certificate.

Syntax

sshauthcontrol.SSHCertStore[=string]

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSHCertStoreType property denotes the type of the certificate store specified by SSHCertStore. If the store is password protected, specify the password in SSHCertStorePassword.

SSHCertStore is used in conjunction with the SSHCertSubject property to specify client certificates. If SSHCertStore has a value, and SSHCertSubject or SSHCertEncoded is set, a search for a certificate is initiated. Please see the SSHCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSHCertStoreB.

Data Type

Binary String

SSHCertStorePassword Property (SSHAuth Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

sshauthcontrol.SSHCertStorePassword[=string]

Default Value

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSHCertStoreType Property (SSHAuth Control)

This is the type of certificate store for this certificate.

Syntax

sshauthcontrol.SSHCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

Remarks

This is the type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr control. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSHCertStore and set SSHCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Data Type

Integer

SSHCertSubject Property (SSHAuth Control)

This is the subject of the certificate used for client authentication.

Syntax

sshauthcontrol.SSHCertSubject[=string]

Default Value

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

Data Type

String

SSHEncryptionAlgorithms Property (SSHAuth Control)

A comma-separated list containing all allowable encryption algorithms.

Syntax

sshauthcontrol.SSHEncryptionAlgorithms[=string]

Default Value

"aes256-ctr,aes192-ctr,aes128-ctr,aes256-cbc,aes192-cbc,aes128-cbc,3des-ctr,3des-cbc,blowfish-cbc,arcfour256,arcfour128,arcfour,cast128-cbc,aes256-gcm@openssh.com,aes128-gcm@openssh.com,chacha20-poly1305@openssh.com"

Remarks

During the SSH handshake, this list will be used to negotiate the encryption algorithm to be used between the client and server. This list is used for both directions: client to server and server to client. When negotiating algorithms, each side sends a list of all algorithms it supports or allows. The algorithm chosen for each direction is the first algorithm to appear in the sender's list that the receiver supports, so it is important to list multiple algorithms in preferential order. If no algorithm can be agreed upon, the control will raise an error and the connection will be aborted.

At least one supported algorithm must appear in this list. The following encryption algorithms are supported by the control:


`aes256-ctr`	256-bit AES encryption in CTR mode
`aes256-cbc`	256-bit AES encryption in CBC mode
`aes192-ctr`	192-bit AES encryption in CTR mode
`aes192-cbc`	192-bit AES encryption in CBC mode
`aes128-ctr`	128-bit AES encryption in CTR mode
`aes128-cbc`	128-bit AES encryption in CBC mode
`3des-ctr`	192-bit (3-key) triple DES encryption in CTR mode
`3des-cbc`	192-bit (3-key) triple DES encryption in CBC mode
`cast128-cbc`	CAST-128 encryption
`blowfish-cbc`	Blowfish encryption
`arcfour`	ARC4 encryption
`arcfour128`	128-bit ARC4 encryption
`arcfour256`	256-bit ARC4 encryption
`aes256-gcm@openssh.com`	256-bit AES encryption in GCM mode.
`aes128-gcm@openssh.com`	128-bit AES encryption in GCM mode.
`chacha20-poly1305@openssh.com`	ChaCha20 with Poly1305-AES encryption.

Data Type

String

SSHHost Property (SSHAuth Control)

The address of the SSH host.

Syntax

sshauthcontrol.SSHHost[=string]

Default Value

Remarks

The SSHHost property specifies the IP address (IP number in dotted internet format) or Domain Name of the remote host. It is set before a connection is attempted and cannot be changed once a connection is established.

If the SSHHost property is set to a Domain Name, a DNS request is initiated, and upon successful termination of the request, the SSHHost property is set to the corresponding address. If the search is not successful, an error is returned.

The SSHHost must be the same host that will be assumed for SSH as for the remote service being connected to.

Data Type

String

SSHPort Property (SSHAuth Control)

The port on the SSH server where the SSH service is running; by default, 22.

Syntax

sshauthcontrol.SSHPort[=integer]

Default Value

Remarks

The SSHPort specifies a service port on the SSH host to connect to.

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

Data Type

Integer

Timeout Property (SSHAuth Control)

A timeout for the control.

Syntax

sshauthcontrol.Timeout[=integer]

Default Value

Remarks

If the Timeout property is set to 0, all operations return immediately, potentially failing with a WOULDBLOCK error if data cannot be sent immediately.

If Timeout is set to a positive value, data is sent in a blocking manner and the control will wait for the operation to complete before returning control. The control will handle any potential WOULDBLOCK errors internally and automatically retry the operation for a maximum of Timeout seconds.

The control will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the control fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

User Property (SSHAuth Control)

The username for SSH authentication.

Syntax

sshauthcontrol.User[=string]

Default Value

Remarks

User specifies the username which is used to authenticate the client to the SSH server. This property is required.

Data Type

String

Authenticate Method (SSHAuth Control)

Authenticates the user.

Syntax

sshauthcontrol.Authenticate

Remarks

This method authenticates the user against the SSHHost. If authentication succeeds this method returns without error. If authentication fails, or an error is encountered, the control fails with an error.

The following common properties are applicable when calling this method:

User (required)
Password (required for password authentication)
SSHCert (required for public key authentication)
SSHHost (required)
SSHPort
AuthMode
SSHEncryptionAlgorithms

Keyboard interactive authentication is handled through the SSHKeyboardInteractive event.

Config Method (SSHAuth Control)

Sets or retrieves a configuration setting.

Syntax

sshauthcontrol.Config ConfigurationString

Remarks

Config is a generic method available in every control. It is used to set and retrieve configuration settings for the control.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoEvents Method (SSHAuth Control)

Processes events from the internal message queue.

Syntax

sshauthcontrol.DoEvents

Remarks

When DoEvents is called, the control processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Interrupt Method (SSHAuth Control)

Interrupt the current method.

Syntax

sshauthcontrol.Interrupt

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

Reset Method (SSHAuth Control)

Resets the control.

Syntax

sshauthcontrol.Reset

Remarks

When called, the control will reset all of its properties to their default values.

Connected Event (SSHAuth Control)

This event is fired immediately after a connection completes (or fails).

Syntax

Sub sshauthcontrol_Connected(StatusCode As Integer, Description As String)

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error. The corresponding Visual Basic error code can be obtained by adding 15001 to this value.

Please refer to the Error Codes section for more information.

ConnectionStatus Event (SSHAuth Control)

This event is fired to indicate changes in the connection state.

Syntax

Sub sshauthcontrol_ConnectionStatus(ConnectionEvent As String, StatusCode As Integer, Description As String)

Remarks

The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:


	Firewall connection complete.
	Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable).
	Remote host connection complete.
	Remote host disconnected.
	SSL or S/Shell connection broken.
	Firewall host disconnected.

StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error. The corresponding Visual Basic error code can be obtained by adding 15001 to this value.

Disconnected Event (SSHAuth Control)

This event is fired when a connection is closed.

Syntax

Sub sshauthcontrol_Disconnected(StatusCode As Integer, Description As String)

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error. The corresponding Visual Basic error code can be obtained by adding 15001 to this value.

Please refer to the Error Codes section for more information.

Error Event (SSHAuth Control)

Information about errors during data delivery.

Syntax

Sub sshauthcontrol_Error(ErrorCode As Integer, Description As String)

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the control fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Log Event (SSHAuth Control)

Fires once for each log message.

Syntax

Sub sshauthcontrol_Log(LogLevel As Integer, Message As String, LogType As String)

Remarks

This event fires once for each log messages generated by the control. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the detail level of the message. Possible values are:


0 (None)	No messages are logged.
1 (Info - Default)	Informational events such as SSH handshake messages are logged.
2 (Verbose)	Detailed data such as individual packet information is logged.
3 (Debug)	Debug data including all relevant sent and received bytes are logged.

Message is the log message.

LogType is reserved for future use.

SSHCustomAuth Event (SSHAuth Control)

Fired when the control is doing custom authentication.

Syntax

Sub sshauthcontrol_SSHCustomAuth(Packet As String)

Remarks

SSHCustomAuth is fired during the user authentication stage of the SSH logon process if SSHAuthMode is set to amCustom. Packet contains the raw last SSH packet sent by the server, in HEX-encoded format.

The client should create a new raw SSH packet to send to the server and set Packet to the HEX-encoded representation of the packet to send.

In all cases, Packet will start with the message type field.

To read the incoming packet call DecodePacket and then use the GetSSHParam and GetSSHParamBytes methods. To create a packet use the SetSSHParam method and then call EncodePacket to obtain a HEX-encoded value and assign this to the Packet parameter.

SSHKeyboardInteractive Event (SSHAuth Control)

Fired when the control receives a request for user input from the server.

Syntax

Sub sshauthcontrol_SSHKeyboardInteractive(Name As String, Instructions As String, Prompt As String, Response As String, EchoResponse As Boolean)

Remarks

SSHKeyboardInteractive is fired during the user authentication stage of the SSH logon process. During authentication, the control will request a list of available authentication methods for the SSHUser. For example, if the SSHHost responds with "keyboard-interactive", the control will fire this event to allow the client application to set the password.

During authentication, the SSH server may respond with a request for the user's authentication information. Name is a server-provided value associated with the authentication method such as "CRYPTOCard Authentication". Instructions will contain specific instructions, also supplied by the server, for how the user should respond.

Along with these values, the server will also send at least one input Prompt to be displayed to and filled out by the user. Response should be set to the user's input, and will be sent back in the user authentication information response. EchoResponse is a server recommendation for whether or not the user's response should be echoed back during input.

Note: the server may send several prompts in a single packet. The control will fire the SSHKeyboardInteractive event once for each prompt.

SSHServerAuthentication Event (SSHAuth Control)

Fired after the server presents its public key to the client.

Syntax

Sub sshauthcontrol_SSHServerAuthentication(HostKey As String, Fingerprint As String, KeyAlgorithm As String, CertSubject As String, CertIssuer As String, Status As String, Accept As Boolean)

Remarks

This event is where the client can decide whether to continue with the connection process or not. If the public key is known to be a valid key for the SSH server, Accept should be set to True within the event. Otherwise, the server will not be authenticated and the connection will be broken.

Accept will be True only if either HostKey or Fingerprint is identical to the value of SSHAcceptServerHostKey.

Accept may be set to True manually to accept the server host key.

Note that SSH's security inherently relies on client verification of the host key. Ignoring the host key and always setting Accept to true is strongly discouraged, and could cause potentially serious security vulnerabilities in your application. It is recommended that clients maintain a list of known keys for each server and check HostKey against this list each time a connection is attempted.

Host Key contains the full binary text of the key, in the same format used internally by SSH.

Fingerprint holds the SHA-256 hash of HostKey in the hex-encoded form: 0a:1b:2c:3d. To configure the hash algorithm used to calculate this value see SSHFingerprintHashAlgorithm.

KeyAlgorithm identifies the host key algorithm. Supported values are:

ssh-rsa
ssh-dss
rsa-sha2-256
rsa-sha2-512
x509v3-sign-rsa
x509v3-sign-dss
ecdsa-sha2-nistp256
ecdsa-sha2-nistp384
ecdsa-sha2-nistp521

To limit the accepted host key algorithms refer to SSHPublicKeyAlgorithms.

CertSubject is the subject of the certificate. This is only applicable when KeyAlgorithm is "x509v3-sign-rsa" or "x509v3-sign-dss".

CertIssuer is the issuer of the certificate. This is only applicable when KeyAlgorithm is "x509v3-sign-rsa" or "x509v3-sign-dss".

Status is reserved for future use.

SSHStatus Event (SSHAuth Control)

Shows the progress of the secure connection.

Syntax

Sub sshauthcontrol_SSHStatus(Message As String)

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

Config Settings (SSHAuth Control)

The control accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

SSHAuth Config Settings

SSHCompressionAlgorithms: A comma-separated list containing all allowable compression algorithms.

During the SSH handshake, this list will be used to negotiate the compression algorithm to be used between the client and server. This list is used for both directions: client to server and server to client. When negotiating algorithms, each side sends a list of all algorithms it supports or allows. The algorithm chosen for each direction is the first algorithm to appear in the sender's list that the receiver supports, so it is important to list multiple algorithms in preferential order. If no algorithm can be agreed upon, the control will raise an error and the connection will be aborted.

At least one supported algorithm must appear in this list. The following compression algorithms are supported by the control:

zlib
zlib@openssh.com
none

SSHClient Config Settings

ChannelDataEOL[ChannelId]: Used to break the incoming data stream into chunks.

By default MaxChannelDataLength is 0 and ChannelDataEOL is an empty string. SSHChannelData fires whenever an SSH_MSG_CHANNEL_DATA packet is received.

If MaxChannelDataLength > 0 and ChannelDataEOL is a non-empty string the control will internally buffer data waiting to fire SSHChannelData until either MaxChannelDataLength is reached or ChannelDataEOL is found, whichever comes first. Query ChannelDataEOLFound to know which condition was met. The buffer is reset any time SSHChannelData fires.

ChannelDataEOL and MaxChannelDataLength MUST be set together or unexpected behavior could occur.

ChannelDataEOLFound[ChannelId]: Determines if ChannelDataEOL was found.

If ,then ChannelDataEOL was found. If , then MaxChannelDataLength was reached.

This config is only valid when queried inside SSHChannelData, MaxChannelDataLength > 0, and ChannelDataEOL is non-empty.

ClientSSHVersionString: The SSH version string used by the control.

This configuration setting specifies the SSH version string used by the control. The default value is "SSH-2.0-IPWorks SSH Client 2022".

Most SSH servers expect the SSH version string to have the expected format "SSH-protocol version-software version". See above for an example.

EnablePageantAuth: Whether to use a key stored in Pageant to perform client authentication.

This setting controls whether Pageant authentication is disabled, enabled, or required. When enabled or required, the control attempts to communicate with PuTTY's ssh-agent, called "Pageant", over shared memory to perform public key authentication. Possible values and the corresponding behavior is described below:


Value	Description
0 (Disabled - default)	No communication with Pageant is attempted.
1 (Enabled)	Pageant authentication is used if available. If Pageant is not running, or does not contain the expected key no error is thrown.
2 (Required)	Only Pageant authentication is used. If Pageant is not running, or does not contain the expected key an error is thrown.

Example enabling Pageant: component.Config("EnablePageantAuth=1"); component.SSHUser = "sshuser"; component.SSHLogon("localhost", 22);

Note: This functionality is only available on Windows.

KerberosDelegation: If true, asks for credentials with delegation enabled during authentication.

The default value is "True". If set to "False", the client will not ask for credentials delegation support during authentication. Note that even if the client asks for delegation, the server/KDC might not grant it and authentication will still succeed.

KerberosRealm: The fully qualified domain name of the Kerberos Realm to use for GSSAPI authentication.

This property may be set to the fully qualified (DNS) name of the kerberos realm (or Windows Active Directory domain name) to use during GSSAPI authentication. This can be used to force authentication with a given realm if the client and server machines are not part of the same domain.

KerberosSPN: The Kerberos Service Principal Name of the SSH host.

This property can be set to specify the Service Principal Name (SPN) associated with the SSH service on the remote host. This will usually be in the form "host/fqdn.of.sshhost[@REALM]". If not specified, the control will assume the SPN is based on the value of the SSHHost property and the kerberos realm used for authentication.

KeyRenegotiationThreshold: Sets the threshold for the SSH Key Renegotiation.

This property allows you to specify the threshold, in the number of bytes, for the SSH Key Renegotiation. The default value for this property is set to 1 GB.

Example (for setting the threshold to 500 MB): SSHComponent.Config("KeyRenegotiationThreshold=524288000")

LogLevel: Specifies the level of detail that is logged.

This setting controls the level of detail that is logged through the Log event. Possible values are:


0 (None)	No messages are logged.
1 (Info - Default)	Informational events such as SSH handshake messages are logged.
2 (Verbose)	Detailed data such as individual packet information is logged.
3 (Debug)	Debug data including all relevant sent and received bytes are logged.

MaxChannelDataLength[ChannelId]: The maximum amount of data to accumulate when no ChannelDataEOL is found.

By default MaxChannelDataLength is 0 and ChannelDataEOL is an empty string. SSHChannelData fires whenever an SSH_MSG_CHANNEL_DATA packet is received.

ChannelDataEOL and MaxChannelDataLength MUST be set together or unexpected behavior could occur.

MaxPacketSize: The maximum packet size of the channel, in bytes.

This setting specifies the maximum size of an individual data packet, in bytes, that can be sent to the sender.

MaxWindowSize: The maximum window size allowed for the channel, in bytes.

This setting specifies how many bytes of channel data can be sent to the sender of this message without adjusting the window. Note that this value may be changed during the connection, but the window size can only be increased, not decreased.

NegotiatedStrictKex: Returns whether strict key exchange was negotiated to be used.

Returns whether strict key exchange (strict kex) was negotiated during the SSH handshake. If strict kex is being used, then this will return "True". If strict kex is not being used, then this will return "False".

component.Config("NegotiatedStrictKex")

PasswordPrompt: The text of the password prompt used in keyboard-interactive authentication.

This setting optionally specifies a pattern to be matched to the prompt received from the server during keyboard-interactive authentication. If a matching prompt is detected the control automatically responds to the prompt with the password specified by SSHPassword.

This provides an easy way to automatically reply to prompts with the password if one is presented by the server. The password will be auto-filled in the Response parameter of the SSHKeyboardInteractive event in the case of a match.

The following special characters are supported for pattern matching:


?	Any single character.
*	Any characters or no characters (e.g., C*t matches Cat, Cot, Coast, Ct).
[,-]	A range of characters (e.g., [a-z], [a], [0-9], [0-9,a-d,f,r-z]).
\	The slash is ignored and exact matching is performed on the next character.

If these characters need to be used as a literal in a pattern, then they must be escaped by surrounding them with brackets []. Note: "]" and "-" do not need to be escaped. See below for the escape sequences:


Character	Escape Sequence
?	[?]
*	[*]
[	[[]
\	[\]

For example, to match the value [Something].txt, specify the pattern [[]Something].txt.

PreferredDHGroupBits: The size (in bits) of the preferred modulus (p) to request from the server.

This may be when using the diffie-hellman-group-exchange-sha1 or diffie-hellman-group-exchange-sha256 key exchange algorithms to control the preferred size, in bits, of the modulus (p) prime number to request from the server. Acceptable values are between 1024 and 8192.

RecordLength: The length of received data records.

If set to a positive value, this setting defines the length of data records to be received. The control will accumulate data until RecordLength is reached and only then fire the DataIn event with data of length RecordLength. This allows data to be received as records of known length. This value can be changed at any time, including within the DataIn event.

The default value is 0, meaning this setting is not used.

ServerSSHVersionString: The remote host's SSH version string.

This will return the remote host's SSH version string, which can help when identifying problematic servers. This configuration setting is read-only.

SignedSSHCert: The CA signed client public key used when authenticating.

When authenticating via public key authentication this setting may be set to the CA signed client's public key. This is useful when the server has been configured to trust client keys signed by a particular CA. For instance: component.Config("SignedSSHCert=ssh-rsa-cert-v01@openssh.com AAAAB3NzaC1yc2EAAAADAQABAAAB..."); The algorithm such as ssh-rsa-cert-v01@openssh.com in the above string is used as part of the authentication process. To use a different algorithm simply change this value. For instance all of the following are acceptable with the same signed public key:

ssh-rsa-cert-v01@openssh.com AAAAB3NzaC1yc2EAAAADAQABAAAB...
rsa-sha2-256-cert-v01@openssh.com AAAAB3NzaC1yc2EAAAADAQABAAAB...
rsa-sha2-512-cert-v01@openssh.com AAAAB3NzaC1yc2EAAAADAQABAAAB...

SSHAcceptAnyServerHostKey: If set the control will accept any key presented by the server.

The default value is "False". Set this to "True" to accept any key presented by the server.

SSHAcceptServerCAKey: The CA public key that signed the server's host key.

If the server's host key was signed by a CA, this setting may be used to specify the CA's public key. If specified the control will trust any server's host key that was signed by the CA. For instance: component.Config("SSHAcceptServerCAKey=ssh-rsa AAAAB3NzaC1yc2EAAAADAQAB...");

SSHAcceptServerHostKeyFingerPrint: The fingerprint of the server key to accept.

This may be set to a comma-delimited collection of 16-byte MD5 fingerprints that should be accepted as the host's key. You may supply it by HEX encoding the values in the form "0a:1b:2c:3d". Example: SSHClient.Config("SSHAcceptServerHostKeyFingerprint=0a:1b:2c:3d"); If the server's fingerprint matches one of the values supplied, the control will accept the host key.

SSHFingerprintHashAlgorithm: The algorithm used to calculate the fingerprint.

This configuration setting controls which hash algorithm is used to calculate the hostkey's fingerprint, displayed when SSHServerAuthentication fires. Valid values are:

MD5
SHA1
SHA256 (default)

SSHFingerprintMD5: The server hostkey's MD5 fingerprint.

This setting may be queried in SSHServerAuthentication to get the server hostkey's MD5 fingerprint.

SSHFingerprintSHA1: The server hostkey's SHA1 fingerprint.

This setting may be queried in SSHServerAuthentication to get the server hostkey's SHA1 fingerprint.

SSHFingerprintSHA256: The server hostkey's SHA256 fingerprint.

This setting may be queried in SSHServerAuthentication to get the server hostkey's SHA256 fingerprint.

SSHKeepAliveCountMax: The maximum number of keep alive packets to send without a response.

This setting specifies the maximum number of keep alive packets to send when no response is received. Normally a response to a keep alive packet is received right away. If no response is received the control will continue to send keep alive packets until SSHKeepAliveCountMax is reached. If this is reached the control will assume the connection is broken and disconnect. The default value is 5.

SSHKeepAliveInterval: The interval between keep alive packets.

This setting specifies the number of seconds between keep alive packets. If set to a positive value the control will send a SSH keep alive packet after KeepAliveInterval seconds of inactivity. This setting only takes effect when there is no activity, if any data is sent or received over the connection it will reset the timer.

The default value is 0 meaning no keep alives will be sent.

Note: The SSHREVERSETUNNEL control uses a default value of 30.

SSHKeyExchangeAlgorithms: Specifies the supported key exchange algorithms.

This may be used to specify the list of supported key exchange algorithms used during SSH negotiation. The value should contain a comma separated list of algorithms. Supported algorithms are:

curve25519-sha256
curve25519-sha256@libssh.org
diffie-hellman-group1-sha1
diffie-hellman-group14-sha1
diffie-hellman-group14-sha256
diffie-hellman-group16-sha512
diffie-hellman-group18-sha512
diffie-hellman-group-exchange-sha256
diffie-hellman-group-exchange-sha1
ecdh-sha2-nistp256
ecdh-sha2-nistp384
ecdh-sha2-nistp521
gss-group14-sha256-toWM5Slw5Ew8Mqkay+al2g==
gss-group16-sha512-toWM5Slw5Ew8Mqkay+al2g==
gss-nistp256-sha256-toWM5Slw5Ew8Mqkay+al2g==
gss-curve25519-sha256-toWM5Slw5Ew8Mqkay+al2g==
gss-group14-sha1-toWM5Slw5Ew8Mqkay+al2g==
gss-gex-sha1-toWM5Slw5Ew8Mqkay+al2g==

The default value is: curve25519-sha256,curve25519-sha256@libssh.org,diffie-hellman-group-exchange-sha256,diffie-hellman-group14-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1,gss-group14-sha256-toWM5Slw5Ew8Mqkay+al2g==,gss-group16-sha512-toWM5Slw5Ew8Mqkay+al2g==,gss-nistp256-sha256-toWM5Slw5Ew8Mqkay+al2g==,gss-curve25519-sha256-toWM5Slw5Ew8Mqkay+al2g==,gss-group14-sha1-toWM5Slw5Ew8Mqkay+al2g==,gss-gex-sha1-toWM5Slw5Ew8Mqkay+al2g==.

SSHKeyRenegotiate: Causes the component to renegotiate the SSH keys.

Once this setting is queried, the component will renegotiate the SSH keys with the remote host.

Example: SSHClient.Config("SSHKeyRenegotiate")

SSHMacAlgorithms: Specifies the supported Mac algorithms.

This may be used to specify an alternate list of supported Mac algorithms used during SSH negotiation. This also specifies the order in which the Mac algorithms are preferred. The value should contain a comma separated list of algorithms. Supported algorithms are:

hmac-sha1
hmac-md5
hmac-sha1-96
hmac-md5-96
hmac-sha2-256
hmac-sha2-256-96
hmac-sha2-512
hmac-sha2-512-96
hmac-ripemd160
hmac-ripemd160-96
hmac-sha2-256-etm@openssh.com
hmac-sha2-512-etm@openssh.com
umac-64@openssh.com
umac-64-etm@openssh.com
umac-128@openssh.com
umac-128-etm@openssh.com

The default value is hmac-sha2-256,hmac-sha2-512,hmac-sha1,hmac-md5,hmac-ripemd160,hmac-sha1-96,hmac-md5-96,hmac-sha2-256-96,hmac-sha2-512-96,hmac-ripemd160-96,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,umac-64@openssh.com,umac-64-etm@openssh.com,umac-128@openssh.com,umac-128-etm@openssh.com.

SSHPubKeyAuthSigAlgorithms: Specifies the enabled signature algorithms that may be used when attempting public key authentication.

This setting specifies a list of signature algorithms that may be used when authenticating to the server using public key authentication. This applies only when public key authentication is performed by the client.

The setting should be a comma separated list of algorithms. At runtime the control will evaluate the specified algorithms and if the algorithm is applicable to the certificate specified in SSHCert it will be used. If the algorithm is not applicable the control will evaluate the next algorithm. Possible values are:

ssh-rsa
rsa-sha2-256
rsa-sha2-512
ssh-dss
ecdsa-sha2-nistp256
ecdsa-sha2-nistp384
ecdsa-sha2-nistp521
ssh-ed25519
x509v3-sign-rsa
x509v3-sign-dss

The default value in Windows is ssh-rsa,rsa-sha2-256,rsa-sha2-512,ssh-dss,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519.

rsa-sha2-256 and rsa-sha2-512 notes

The control will query the server for supported algorithms when connecting. If the server indicates support for rsa-sha2-256 or rsa-sha2-512 and the algorithm is present in the list defined by this setting (as in the default value), that algorithm will be used instead of ssh-rsa even when ssh-rsa appears first in the list.

For the rsa-sha2-256 and rsa-sha2-512 algorithms to be automatically preferred the server must support the ext-info-c mechanism. In practice, older servers do not support this and in that case ssh-rsa will be used since it appears first in the list. Newer servers do support this mechanism and in that case rsa-sha2-256 or rsa-sha2-512 will be used even though it appears after ssh-rsa.

This behavior has been carefully designed to provide maximum compatibility while automatically using more secure algorithms when connecting to servers which support them.

SSHPublicKeyAlgorithms: Specifies the supported public key algorithms for the server's public key.

This setting specifies the allowed public key algorithms for the server's public key. This list controls only the public key algorithm used when authenticating the server's public key. This list has no bearing on the public key algorithms that can be used by the client when performing public key authentication to the server. The default value is ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,rsa-sha2-256,rsa-sha2-512,ssh-rsa,ssh-dss,x509v3-sign-rsa,x509v3-sign-dss.

SSHVersionPattern: The pattern used to match the remote host's version string.

This configuration setting specifies the pattern used to accept or deny the remote host's SSH version string. It takes a comma-delimited list of patterns to match. The default value is "*SSH-1.99-*,*SSH-2.0-*" and will accept connections from SSH 1.99 and 2.0 hosts. As an example, the below value would accept connections for SSH 1.99, 2.0, and 2.99 hosts.

*SSH-1.99-*,*SSH-2.0-*,*SSH-2.99-*

TryAllAvailableAuthMethods: If set to true, the control will try all available authentication methods.

The default value is . When set to , the control will try to authenticate using all methods that it has credentials for and the server supports.

UseStrictKeyExchange: Specifies how strict key exchange is supported.

This setting controls whether strict key exchange (strict kex) is enabled to mitigate the Terrapin attack. When enabled, the control will indicate support for strict key exchange by automatically including the pseudo-algorithm kex-strict-c-v00@openssh.com for client controls and kex-strict-s-v00@openssh.com for server controls in the list of supported key exchange algorithms.

Since both client and server must implement strict key exchange to effectively mitigate the Terrapin attack, the control provides options to further control the behavior in different scenarios. Possible values for this setting are:


`0`	Disabled. Strict key exchange is not supported in the control.
`1` (default)	Enabled, but not enforced. This setting enables strict key exchange, but if the remote host does not support strict key exchange the connection is still allowed to continue.
`2`	Enabled, but reject affected algorithms if the remote host does not support strict key exchange. If the remote host supports strict key exchange all algorithms may be used. If the remote host does not support strict key exchange the connection will only continue if the selected encryption and MAC algorithms are not affected by the Terrapin attack.
`3`	Required. If the remote host does not support strict key exchange the connection will fail.

WaitForChannelClose: Whether to wait for channels to be closed before disconnected.

This setting controls whether the control will wait for a server response to the SSH_MSG_CHANNEL_CLOSE when disconnecting. When the control disconnects it will first attempt to close all open channels by sending a SSH_MSG_CHANNEL_CLOSE for each channel. This setting controls whether the control will wait for a server response after sending the messages.

When True (default) the control will wait for a response to the channel close message until the responses have been received, the server closes the connection, or Timeout seconds is reached.

When False the control will still send the channel close messages but will not wait for a response and will proceed to close the connection.

WaitForServerDisconnect: Whether to wait for the server to close the connection.

This setting controls whether to wait for the server to close the connection when SSHLogoff is called.

When set to True the control will initiate the disconnection sequence by sending SSH_MSG_DISCONNECT but will not close the connection, and instead will wait for the server to close the connection. Setting this to True may be beneficial in circumstances where many connections are being established, to avoid port exhaustion when sockets are in a TIME_WAIT state. Allowing the server to close the connection avoids the TIME_WAIT state of socket on the client machine.

When set to False (default) the client will close the connection. It is recommended to use this value unless there is a specific need to change it.

TCPClient Config Settings

ConnectionTimeout: Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the control will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect: Tells the control whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by controls that do not directly expose Firewall properties.

FirewallHost: Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by controls that do not directly expose Firewall properties.

FirewallPassword: Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the control fails with an error.

Note: This setting is provided for use by controls that do not directly expose Firewall properties.

FirewallPort: The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by controls that do not directly expose Firewall properties.

FirewallType: Determines the type of firewall to connect through.

The appropriate values are as follows:


0	No firewall (default setting).
1	Connect through a tunneling proxy. FirewallPort is set to 80.
2	Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3	Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10	Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by controls that do not directly expose Firewall properties.

FirewallUser: A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the control fails with an error.

Note: This setting is provided for use by controls that do not directly expose Firewall properties.

KeepAliveInterval: The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime: The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger: When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the control returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime: Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost: The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

If the control is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

LocalPort: The port in the local host where the control binds.

This must be set before a connection is attempted. It instructs the control to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength: The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate: The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList: A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive: Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay: Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6: Whether to use IPv6.

When set to 0 (default), the control will use IPv4 exclusively. When set to 1, the control will use IPv6 exclusively. To instruct the control to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:


0	IPv4 Only
1	IPv6 Only
2	IPv6 with IPv4 fallback

Socket Config Settings

AbsoluteTimeout: Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

FirewallData: Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

InBufferSize: The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the control is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize: The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the control is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

CodePage: The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:


Identifier	Name
037	IBM EBCDIC - U.S./Canada
437	OEM - United States
500	IBM EBCDIC - International
708	Arabic - ASMO 708
709	Arabic - ASMO 449+, BCON V4
710	Arabic - Transparent Arabic
720	Arabic - Transparent ASMO
737	OEM - Greek (formerly 437G)
775	OEM - Baltic
850	OEM - Multilingual Latin I
852	OEM - Latin II
855	OEM - Cyrillic (primarily Russian)
857	OEM - Turkish
858	OEM - Multilingual Latin I + Euro symbol
860	OEM - Portuguese
861	OEM - Icelandic
862	OEM - Hebrew
863	OEM - Canadian-French
864	OEM - Arabic
865	OEM - Nordic
866	OEM - Russian
869	OEM - Modern Greek
870	IBM EBCDIC - Multilingual/ROECE (Latin-2)
874	ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875	IBM EBCDIC - Modern Greek
932	ANSI/OEM - Japanese, Shift-JIS
936	ANSI/OEM - Simplified Chinese (PRC, Singapore)
949	ANSI/OEM - Korean (Unified Hangul Code)
950	ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026	IBM EBCDIC - Turkish (Latin-5)
1047	IBM EBCDIC - Latin 1/Open System
1140	IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141	IBM EBCDIC - Germany (20273 + Euro symbol)
1142	IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143	IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144	IBM EBCDIC - Italy (20280 + Euro symbol)
1145	IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146	IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147	IBM EBCDIC - France (20297 + Euro symbol)
1148	IBM EBCDIC - International (500 + Euro symbol)
1149	IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200	Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201	Unicode UCS-2 Big-Endian
1250	ANSI - Central European
1251	ANSI - Cyrillic
1252	ANSI - Latin I
1253	ANSI - Greek
1254	ANSI - Turkish
1255	ANSI - Hebrew
1256	ANSI - Arabic
1257	ANSI - Baltic
1258	ANSI/OEM - Vietnamese
1361	Korean (Johab)
10000	MAC - Roman
10001	MAC - Japanese
10002	MAC - Traditional Chinese (Big5)
10003	MAC - Korean
10004	MAC - Arabic
10005	MAC - Hebrew
10006	MAC - Greek I
10007	MAC - Cyrillic
10008	MAC - Simplified Chinese (GB 2312)
10010	MAC - Romania
10017	MAC - Ukraine
10021	MAC - Thai
10029	MAC - Latin II
10079	MAC - Icelandic
10081	MAC - Turkish
10082	MAC - Croatia
12000	Unicode UCS-4 Little-Endian
12001	Unicode UCS-4 Big-Endian
20000	CNS - Taiwan
20001	TCA - Taiwan
20002	Eten - Taiwan
20003	IBM5550 - Taiwan
20004	TeleText - Taiwan
20005	Wang - Taiwan
20105	IA5 IRV International Alphabet No. 5 (7-bit)
20106	IA5 German (7-bit)
20107	IA5 Swedish (7-bit)
20108	IA5 Norwegian (7-bit)
20127	US-ASCII (7-bit)
20261	T.61
20269	ISO 6937 Non-Spacing Accent
20273	IBM EBCDIC - Germany
20277	IBM EBCDIC - Denmark/Norway
20278	IBM EBCDIC - Finland/Sweden
20280	IBM EBCDIC - Italy
20284	IBM EBCDIC - Latin America/Spain
20285	IBM EBCDIC - United Kingdom
20290	IBM EBCDIC - Japanese Katakana Extended
20297	IBM EBCDIC - France
20420	IBM EBCDIC - Arabic
20423	IBM EBCDIC - Greek
20424	IBM EBCDIC - Hebrew
20833	IBM EBCDIC - Korean Extended
20838	IBM EBCDIC - Thai
20866	Russian - KOI8-R
20871	IBM EBCDIC - Icelandic
20880	IBM EBCDIC - Cyrillic (Russian)
20905	IBM EBCDIC - Turkish
20924	IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932	JIS X 0208-1990 & 0121-1990
20936	Simplified Chinese (GB2312)
21025	IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027	Extended Alpha Lowercase
21866	Ukrainian (KOI8-U)
28591	ISO 8859-1 Latin I
28592	ISO 8859-2 Central Europe
28593	ISO 8859-3 Latin 3
28594	ISO 8859-4 Baltic
28595	ISO 8859-5 Cyrillic
28596	ISO 8859-6 Arabic
28597	ISO 8859-7 Greek
28598	ISO 8859-8 Hebrew
28599	ISO 8859-9 Latin 5
28605	ISO 8859-15 Latin 9
29001	Europa 3
38598	ISO 8859-8 Hebrew
50220	ISO 2022 Japanese with no halfwidth Katakana
50221	ISO 2022 Japanese with halfwidth Katakana
50222	ISO 2022 Japanese JIS X 0201-1989
50225	ISO 2022 Korean
50227	ISO 2022 Simplified Chinese
50229	ISO 2022 Traditional Chinese
50930	Japanese (Katakana) Extended
50931	US/Canada and Japanese
50933	Korean Extended and Korean
50935	Simplified Chinese Extended and Simplified Chinese
50936	Simplified Chinese
50937	US/Canada and Traditional Chinese
50939	Japanese (Latin) Extended and Japanese
51932	EUC - Japanese
51936	EUC - Simplified Chinese
51949	EUC - Korean
51950	EUC - Traditional Chinese
52936	HZ-GB2312 Simplified Chinese
54936	Windows XP: GB18030 Simplified Chinese (4 Byte)
57002	ISCII Devanagari
57003	ISCII Bengali
57004	ISCII Tamil
57005	ISCII Telugu
57006	ISCII Assamese
57007	ISCII Oriya
57008	ISCII Kannada
57009	ISCII Malayalam
57010	ISCII Gujarati
57011	ISCII Punjabi
65000	Unicode UTF-7
65001	Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:


Identifier	Name
1	ASCII
2	NEXTSTEP
3	JapaneseEUC
4	UTF8
5	ISOLatin1
6	Symbol
7	NonLossyASCII
8	ShiftJIS
9	ISOLatin2
10	Unicode
11	WindowsCP1251
12	WindowsCP1252
13	WindowsCP1253
14	WindowsCP1254
15	WindowsCP1250
21	ISO2022JP
30	MacOSRoman
10	UTF16String
0x90000100	UTF16BigEndian
0x94000100	UTF16LittleEndian
0x8c000100	UTF32String
0x98000100	UTF32BigEndian
0x9c000100	UTF32LittleEndian
65536	Proprietary

MaskSensitive: Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to to mask sensitive data. The default is .

This setting only works on these controls: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseInternalSecurityAPI: Whether or not to use the system security libraries or an internal implementation.

When set to , the control will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to tells the control to use the internal implementation instead of using the system security libraries.

This setting is set to by default on all platforms.

Trappable Errors (SSHAuth Control)

The control may also return one of the following error codes, which are inherited from other controls.

TCPClient Errors


	20101 You cannot change the RemotePort at this time. A connection is in progress.
	20102 You cannot change the RemoteHost (Server) at this time. A connection is in progress.
	20103 The RemoteHost address is invalid (0.0.0.0).
	20105 Already connected. If you want to reconnect, close the current connection first.
	20107 You cannot change the LocalPort at this time. A connection is in progress.
	20108 You cannot change the LocalHost at this time. A connection is in progress.
	20113 You cannot change MaxLineLength at this time. A connection is in progress.
	20117 RemotePort cannot be zero. Please specify a valid service port number.
	20118 You cannot change the UseConnection option while the control is active.
	20136 Operation would block.
	20202 Timeout.
	20212 Action impossible in control's present state.
	20213 Action impossible while not connected.
	20214 Action impossible while listening.
	20302 Timeout.
	20303 Could not open file.
	20435 Unable to convert string to selected CodePage.
	21106 Already connecting. If you want to reconnect, close the current connection first.
	21118 You need to connect first.
	21120 You cannot change the LocalHost at this time. A connection is in progress.
	21121 Connection dropped by remote host.

TCP/IP Errors


	25005 [10004] Interrupted system call.
	25010 [10009] Bad file number.
	25014 [10013] Access denied.
	25015 [10014] Bad address.
	25023 [10022] Invalid argument.
	25025 [10024] Too many open files.
	25036 [10035] Operation would block.
	25037 [10036] Operation now in progress.
	25038 [10037] Operation already in progress.
	25039 [10038] Socket operation on non-socket.
	25040 [10039] Destination address required.
	25041 [10040] Message too long.
	25042 [10041] Protocol wrong type for socket.
	25043 [10042] Bad protocol option.
	25044 [10043] Protocol not supported.
	25045 [10044] Socket type not supported.
	25046 [10045] Operation not supported on socket.
	25047 [10046] Protocol family not supported.
	25048 [10047] Address family not supported by protocol family.
	25049 [10048] Address already in use.
	25050 [10049] Can't assign requested address.
	25051 [10050] Network is down.
	25052 [10051] Network is unreachable.
	25053 [10052] Net dropped connection or reset.
	25054 [10053] Software caused connection abort.
	25055 [10054] Connection reset by peer.
	25056 [10055] No buffer space available.
	25057 [10056] Socket is already connected.
	25058 [10057] Socket is not connected.
	25059 [10058] Can't send after socket shutdown.
	25060 [10059] Too many references, can't splice.
	25061 [10060] Connection timed out.
	25062 [10061] Connection refused.
	25063 [10062] Too many levels of symbolic links.
	25064 [10063] File name too long.
	25065 [10064] Host is down.
	25066 [10065] No route to host.
	25067 [10066] Directory not empty
	25068 [10067] Too many processes.
	25069 [10068] Too many users.
	25070 [10069] Disc Quota Exceeded.
	25071 [10070] Stale NFS file handle.
	25072 [10071] Too many levels of remote in path.
	25092 [10091] Network subsystem is unavailable.
	25093 [10092] WINSOCK DLL Version out of range.
	25094 [10093] Winsock not loaded yet.
	26002 [11001] Host not found.
	26003 [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
	26004 [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
	26005 [11004] Valid name, no data record (check DNS setup).