IPWorks Auth 2022 macOS Edition
Version 22.0 [Build 8369]

NTLM Module

Properties   Methods   Events   Config Settings   Errors  

The NTLM module provides a simple API to create the required tokens for NTLM authentication.

Syntax

IPWorksAuth.Ntlm

Remarks

This class provides a simple API to create the required tokens for NTLM authentication.

The NTLM authentication process is a challenge-response scheme which consists of three messages. These three messages are the negotiation, challenge, and authentication. This class implements only the client side of NTLM and will create the negotiation and authentication tokens. The class does not transmit any data, it simply prepares the tokens for use in other transport protocols such as HTTP. The following steps describe how the component is used.

Create the Negotiate Token

To begin first set User and Password. The user value may contain domain information in the format "DOMAIN\User" or "user@domain". Next call CreateNegotiateToken to populate NegotiateToken. This token may then be transmitted separately. For instance in HTTP this would be sent in a request within the Authorization header: HTTPHeader = "Authorization: NTLM " + NegotiateToken

Create the Auth Token

After sending the negotiate token over the chosen transport protocol, the server will respond with a challenge token. Set ChallengeToken to the token received from the server. For instance, in HTTP the server will respond with the challenge token in the WWW-Authenticate header:

WWW-Authenticate: NTLM <ChallengeToken>
After setting User, Password, and ChallengeToken call CreateAuthToken. This will populate AuthToken with the created token. This token may then be transmitted separately. For instance in HTTP this would be sent in the request within the Authorization header: HTTPHeader = "Authorization: NTLM " + AuthToken

Note: If the server requires EPA (Extended Protection for Authentication), then SSLServerCert must be set to the server's public certificate before calling CreateAuthToken.

Property List


The following is the full list of the properties of the module with short descriptions. Click on the links for further details.

AuthTokenThe authentication token.
ChallengeTokenThe challenge token.
NegotiateTokenThe negotiate token.
NTLMVersionThe NTLM version.
PasswordThe user's password.
SSLServerCertEncodedThis is the certificate (PEM/base64 encoded).
SSLServerCertStoreThis is the name of the certificate store for the client certificate.
SSLServerCertStorePasswordIf the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSLServerCertStoreTypeThis is the type of certificate store for this certificate.
SSLServerCertSubjectThis is the subject of the certificate used for client authentication.
UserThe user.

Method List


The following is the full list of the methods of the module with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting.
CreateAuthTokenCreates the authentication token.
CreateNegotiateTokenCreates the negotiate token.
ResetResets the module.

Event List


The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.

ErrorInformation about errors during data delivery.

Config Settings


The following is a list of config settings for the module with short descriptions. Click on the links for further details.

DecodeTokenWhether to Base64 encode the token.
EncodeTokenWhether to Base64 encode the token.
UsePlatformNTLMAPIWhether to use the platform NTLM API.
WorkstationThe workstation name.
BuildInfoInformation about the product's build.
CodePageThe system code page used for Unicode to Multibyte translations.
LicenseInfoInformation about the current license.
UseInternalSecurityAPITells the module whether or not to use the system security libraries or an internal implementation.

AuthToken Property (NTLM Module)

The authentication token.

Syntax

public var authToken: String {
  get {...}
}

public var authTokenB: Data { get {...} }

@property (nonatomic,readonly,assign,getter=authToken) NSString* authToken;

- (NSString*)authToken;

@property (nonatomic,readonly,assign,getter=authTokenB) NSData* authTokenB;

- (NSData*)authTokenB;

Default Value

""

Remarks

This property holds the created authentication token. This property is populated after calling CreateAuthToken.

Note: By default this value is Base64 encoded. Set EncodeToken to False before calling CreateAuthToken to obtain the raw value.

This property is read-only.

ChallengeToken Property (NTLM Module)

The challenge token.

Syntax

public var challengeToken: String {
  get {...}
  set {...}
}

public var challengeTokenB: Data { get {...} set {...} }

@property (nonatomic,readwrite,assign,getter=challengeToken,setter=setChallengeToken:) NSString* challengeToken;

- (NSString*)challengeToken;
- (void)setChallengeToken :(NSString*)newChallengeToken;

@property (nonatomic,readwrite,assign,getter=challengeTokenB,setter=setChallengeTokenB:) NSData* challengeTokenB;

- (NSData*)challengeTokenB;
- (void)setChallengeTokenB :(NSData*)newChallengeToken;

Default Value

""

Remarks

This property specifies the challenge token. This must be set to the challenge token received from the server before calling CreateAuthToken.

Note: By default the class expects the token to be Base64 encoded. To provide a raw value to this property first set DecodeToken to False.

NegotiateToken Property (NTLM Module)

The negotiate token.

Syntax

public var negotiateToken: String {
  get {...}
}

public var negotiateTokenB: Data { get {...} }

@property (nonatomic,readonly,assign,getter=negotiateToken) NSString* negotiateToken;

- (NSString*)negotiateToken;

@property (nonatomic,readonly,assign,getter=negotiateTokenB) NSData* negotiateTokenB;

- (NSData*)negotiateTokenB;

Default Value

""

Remarks

This property is populated after calling CreateNegotiateToken. By default the value is Base64 encoded. To obtain the raw value set EncodeToken to False before calling CreateNegotiateToken.

This property is read-only.

NTLMVersion Property (NTLM Module)

The NTLM version.

Syntax

public var ntlmVersion: NtlmNTLMVersions {
  get {...}
  set {...}
}

public enum NtlmNTLMVersions: Int32 { case ntNTLMv1 = 1 case ntNTLMv2 = 2 }

@property (nonatomic,readwrite,assign,getter=NTLMVersion,setter=setNTLMVersion:) int NTLMVersion;

- (int)NTLMVersion;
- (void)setNTLMVersion :(int)newNTLMVersion;

Default Value

1

Remarks

This property specifies the NTLM version to use. Possible values are:

  • 1 (ntNTLMv1 - default)
  • 2 (ntNTLMv2)

Note: If the server requires EPA (Extended Protection for Authentication) this property must be set to 2 (ntNTLMv2).

Password Property (NTLM Module)

The user's password.

Syntax

public var password: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=password,setter=setPassword:) NSString* password;

- (NSString*)password;
- (void)setPassword :(NSString*)newPassword;

Default Value

""

Remarks

This property specifies the user's password.

SSLServerCertEncoded Property (NTLM Module)

This is the certificate (PEM/base64 encoded).

Syntax

public var sslServerCertEncoded: String {
  get {...}
  set {...}
}

public var sslServerCertEncodedB: Data { get {...} set {...} }

@property (nonatomic,readwrite,assign,getter=SSLServerCertEncoded,setter=setSSLServerCertEncoded:) NSString* SSLServerCertEncoded;

- (NSString*)SSLServerCertEncoded;
- (void)setSSLServerCertEncoded :(NSString*)newSSLServerCertEncoded;

@property (nonatomic,readwrite,assign,getter=SSLServerCertEncodedB,setter=setSSLServerCertEncodedB:) NSData* SSLServerCertEncodedB;

- (NSData*)SSLServerCertEncodedB;
- (void)setSSLServerCertEncodedB :(NSData*)newSSLServerCertEncoded;

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLServerCertEncodedB(sslServerCertEncoded: Data) throws
public func setSSLServerCertEncoded(sslServerCertEncoded: String) throws

SSLServerCertStore Property (NTLM Module)

This is the name of the certificate store for the client certificate.

Syntax

public var sslServerCertStore: String {
  get {...}
  set {...}
}

public var sslServerCertStoreB: Data { get {...} set {...} }

@property (nonatomic,readwrite,assign,getter=SSLServerCertStore,setter=setSSLServerCertStore:) NSString* SSLServerCertStore;

- (NSString*)SSLServerCertStore;
- (void)setSSLServerCertStore :(NSString*)newSSLServerCertStore;

@property (nonatomic,readwrite,assign,getter=SSLServerCertStoreB,setter=setSSLServerCertStoreB:) NSData* SSLServerCertStoreB;

- (NSData*)SSLServerCertStoreB;
- (void)setSSLServerCertStoreB :(NSData*)newSSLServerCertStore;

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

SSLServerCertStorePassword Property (NTLM Module)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

public var sslServerCertStorePassword: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=SSLServerCertStorePassword,setter=setSSLServerCertStorePassword:) NSString* SSLServerCertStorePassword;

- (NSString*)SSLServerCertStorePassword;
- (void)setSSLServerCertStorePassword :(NSString*)newSSLServerCertStorePassword;

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

SSLServerCertStoreType Property (NTLM Module)

This is the type of certificate store for this certificate.

Syntax

public var sslServerCertStoreType: NtlmSSLServerCertStoreTypes {
  get {...}
  set {...}
}

public enum NtlmSSLServerCertStoreTypes: Int32 { case cstUser = 0 case cstMachine = 1 case cstPFXFile = 2 case cstPFXBlob = 3 case cstJKSFile = 4 case cstJKSBlob = 5 case cstPEMKeyFile = 6 case cstPEMKeyBlob = 7 case cstPublicKeyFile = 8 case cstPublicKeyBlob = 9 case cstSSHPublicKeyBlob = 10 case cstP7BFile = 11 case cstP7BBlob = 12 case cstSSHPublicKeyFile = 13 case cstPPKFile = 14 case cstPPKBlob = 15 case cstXMLFile = 16 case cstXMLBlob = 17 case cstJWKFile = 18 case cstJWKBlob = 19 case cstSecurityKey = 20 case cstBCFKSFile = 21 case cstBCFKSBlob = 22 case cstAuto = 99 }

@property (nonatomic,readwrite,assign,getter=SSLServerCertStoreType,setter=setSSLServerCertStoreType:) int SSLServerCertStoreType;

- (int)SSLServerCertStoreType;
- (void)setSSLServerCertStoreType :(int)newSSLServerCertStoreType;

Default Value

0

Remarks

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used the class will automatically determine the type. This property can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: this store type is not available in Java.
1 (cstMachine)For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
2 (cstPFXFile)The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in PFX (PKCS12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: this store type is only available in Java.
5 (cstJKSBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
20 (cstSecurityKey)The certificate is present on a physical security key accessible via a PKCS11 interface.

To use a security key the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstSecurityKey, CertStorePassword to the PIN, and CertStore to the full path of the PKCS11 dll. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the SSLServerCertStore and set SSLServerCertStorePassword to the PIN.

Code Example: SSH Authentication with Security Key certmgr.CertStoreType = CertStoreTypes.cstSecurityKey; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstSecurityKey, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: this store type is only available in Java and .NET.
22 (cstBCFKSBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: this store type is only available in Java and .NET.
99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

SSLServerCertSubject Property (NTLM Module)

This is the subject of the certificate used for client authentication.

Syntax

public var sslServerCertSubject: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=SSLServerCertSubject,setter=setSSLServerCertSubject:) NSString* SSLServerCertSubject;

- (NSString*)SSLServerCertSubject;
- (void)setSSLServerCertSubject :(NSString*)newSSLServerCertSubject;

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properites are set. When this property is set, a search is performed in the current certificate store certificate with matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.

FieldMeaning
CNCommon Name. This is commonly a host name like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma it must be quoted.

If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:

public func setSSLServerCertSubject(sslServerCertSubject: String) throws

User Property (NTLM Module)

The user.

Syntax

public var user: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=user,setter=setUser:) NSString* user;

- (NSString*)user;
- (void)setUser :(NSString*)newUser;

Default Value

""

Remarks

This property specifies the name and realm/domain of the user. The value specified must be in one of the following formats:

  • user
  • domain/user

Config Method (NTLM Module)

Sets or retrieves a configuration setting.

Syntax

public func config(configurationString: String) throws -> String
- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateAuthToken Method (NTLM Module)

Creates the authentication token.

Syntax

public func createAuthToken() throws -> Void
- (void)createAuthToken;

Remarks

This method creates the authentication token. After calling this method the AuthToken property will be populated. The following properties are applicable when calling this method:

Note: SSLServerCert must be set to the server's public certificate if the server requires EPA (Extended Protection for Authentication).

CreateNegotiateToken Method (NTLM Module)

Creates the negotiate token.

Syntax

public func createNegotiateToken() throws -> Void
- (void)createNegotiateToken;

Remarks

This method creates the negotiate token. After calling this method the NegotiateToken property is populated. The following properties are applicable when calling this method:

Reset Method (NTLM Module)

Resets the component.

Syntax

public func reset() throws -> Void
- (void)reset;

Remarks

When called, the class will reset all of its properties to their default values.

Error Event (NTLM Module)

Information about errors during data delivery.

Syntax

func onError(errorCode: Int32, description: String)
- (void)onError:(int)errorCode :(NSString*)description;

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class .

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Config Settings (NTLM Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

NTLM Config Settings

DecodeToken:   Whether to Base64 encode the token.

This setting specifies whether to Base64 decode the ChallengeToken. The default value is True.

EncodeToken:   Whether to Base64 encode the token.

This setting specifies whether AuthToken and rpChallengeToken are Base64 encoded after calling CreateAuthToken and rmCreateNegotiateToken;. The default value is True.

UsePlatformNTLMAPI:   Whether to use the platform NTLM API.

This setting specifies whether to use the platform NTLM API. The default value is False.

Workstation:   The workstation name.

This setting optionally specifies the workstation name of the client. By default this value is empty and the class will automatically determine the correct value.

Note: This setting is not applicable when UsePlatformNTLMAPI is True. The platform NTLM API will always use the current workstation's name.

Base Config Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage:   The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

IdentifierName
037IBM EBCDIC - U.S./Canada
437OEM - United States
500IBM EBCDIC - International
708Arabic - ASMO 708
709Arabic - ASMO 449+, BCON V4
710Arabic - Transparent Arabic
720Arabic - Transparent ASMO
737OEM - Greek (formerly 437G)
775OEM - Baltic
850OEM - Multilingual Latin I
852OEM - Latin II
855OEM - Cyrillic (primarily Russian)
857OEM - Turkish
858OEM - Multilingual Latin I + Euro symbol
860OEM - Portuguese
861OEM - Icelandic
862OEM - Hebrew
863OEM - Canadian-French
864OEM - Arabic
865OEM - Nordic
866OEM - Russian
869OEM - Modern Greek
870IBM EBCDIC - Multilingual/ROECE (Latin-2)
874ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875IBM EBCDIC - Modern Greek
932ANSI/OEM - Japanese, Shift-JIS
936ANSI/OEM - Simplified Chinese (PRC, Singapore)
949ANSI/OEM - Korean (Unified Hangul Code)
950ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026IBM EBCDIC - Turkish (Latin-5)
1047IBM EBCDIC - Latin 1/Open System
1140IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141IBM EBCDIC - Germany (20273 + Euro symbol)
1142IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144IBM EBCDIC - Italy (20280 + Euro symbol)
1145IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147IBM EBCDIC - France (20297 + Euro symbol)
1148IBM EBCDIC - International (500 + Euro symbol)
1149IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201Unicode UCS-2 Big-Endian
1250ANSI - Central European
1251ANSI - Cyrillic
1252ANSI - Latin I
1253ANSI - Greek
1254ANSI - Turkish
1255ANSI - Hebrew
1256ANSI - Arabic
1257ANSI - Baltic
1258ANSI/OEM - Vietnamese
1361Korean (Johab)
10000MAC - Roman
10001MAC - Japanese
10002MAC - Traditional Chinese (Big5)
10003MAC - Korean
10004MAC - Arabic
10005MAC - Hebrew
10006MAC - Greek I
10007MAC - Cyrillic
10008MAC - Simplified Chinese (GB 2312)
10010MAC - Romania
10017MAC - Ukraine
10021MAC - Thai
10029MAC - Latin II
10079MAC - Icelandic
10081MAC - Turkish
10082MAC - Croatia
12000Unicode UCS-4 Little-Endian
12001Unicode UCS-4 Big-Endian
20000CNS - Taiwan
20001TCA - Taiwan
20002Eten - Taiwan
20003IBM5550 - Taiwan
20004TeleText - Taiwan
20005Wang - Taiwan
20105IA5 IRV International Alphabet No. 5 (7-bit)
20106IA5 German (7-bit)
20107IA5 Swedish (7-bit)
20108IA5 Norwegian (7-bit)
20127US-ASCII (7-bit)
20261T.61
20269ISO 6937 Non-Spacing Accent
20273IBM EBCDIC - Germany
20277IBM EBCDIC - Denmark/Norway
20278IBM EBCDIC - Finland/Sweden
20280IBM EBCDIC - Italy
20284IBM EBCDIC - Latin America/Spain
20285IBM EBCDIC - United Kingdom
20290IBM EBCDIC - Japanese Katakana Extended
20297IBM EBCDIC - France
20420IBM EBCDIC - Arabic
20423IBM EBCDIC - Greek
20424IBM EBCDIC - Hebrew
20833IBM EBCDIC - Korean Extended
20838IBM EBCDIC - Thai
20866Russian - KOI8-R
20871IBM EBCDIC - Icelandic
20880IBM EBCDIC - Cyrillic (Russian)
20905IBM EBCDIC - Turkish
20924IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932JIS X 0208-1990 & 0121-1990
20936Simplified Chinese (GB2312)
21025IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027Extended Alpha Lowercase
21866Ukrainian (KOI8-U)
28591ISO 8859-1 Latin I
28592ISO 8859-2 Central Europe
28593ISO 8859-3 Latin 3
28594ISO 8859-4 Baltic
28595ISO 8859-5 Cyrillic
28596ISO 8859-6 Arabic
28597ISO 8859-7 Greek
28598ISO 8859-8 Hebrew
28599ISO 8859-9 Latin 5
28605ISO 8859-15 Latin 9
29001Europa 3
38598ISO 8859-8 Hebrew
50220ISO 2022 Japanese with no halfwidth Katakana
50221ISO 2022 Japanese with halfwidth Katakana
50222ISO 2022 Japanese JIS X 0201-1989
50225ISO 2022 Korean
50227ISO 2022 Simplified Chinese
50229ISO 2022 Traditional Chinese
50930Japanese (Katakana) Extended
50931US/Canada and Japanese
50933Korean Extended and Korean
50935Simplified Chinese Extended and Simplified Chinese
50936Simplified Chinese
50937US/Canada and Traditional Chinese
50939Japanese (Latin) Extended and Japanese
51932EUC - Japanese
51936EUC - Simplified Chinese
51949EUC - Korean
51950EUC - Traditional Chinese
52936HZ-GB2312 Simplified Chinese
54936Windows XP: GB18030 Simplified Chinese (4 Byte)
57002ISCII Devanagari
57003ISCII Bengali
57004ISCII Tamil
57005ISCII Telugu
57006ISCII Assamese
57007ISCII Oriya
57008ISCII Kannada
57009ISCII Malayalam
57010ISCII Gujarati
57011ISCII Punjabi
65000Unicode UTF-7
65001Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:

IdentifierName
1ASCII
2NEXTSTEP
3JapaneseEUC
4UTF8
5ISOLatin1
6Symbol
7NonLossyASCII
8ShiftJIS
9ISOLatin2
10Unicode
11WindowsCP1251
12WindowsCP1252
13WindowsCP1253
14WindowsCP1254
15WindowsCP1250
21ISO2022JP
30MacOSRoman
10UTF16String
0x90000100UTF16BigEndian
0x94000100UTF16LittleEndian
0x8c000100UTF32String
0x98000100UTF32BigEndian
0x9c000100UTF32LittleEndian
65536Proprietary

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
  • Last Valid Build: The last valid build number for which the license will work.
UseInternalSecurityAPI:   Tells the class whether or not to use the system security libraries or an internal implementation.

By default the class will use the system security libraries to perform cryptographic functions where applicable. Setting this to tells the class to use the internal implementation instead of using the system's security API.

Trappable Errors (NTLM Module)

NTLM Errors

101   Component is busy.
102   Username and password must be specified.
103   ChallengeToken must be specified.

Copyright (c) 2022 /n software inc. - All rights reserved.
IPWorks Auth 2022 macOS Edition - Version 22.0 [Build 8369]