SAML Module
Properties Methods Events Config Settings Errors
The SAML module is used to obtain security tokens and assertions.
Syntax
IPWorksAuth.Saml
Remarks
The SAML class provides an easy-to-use interface to obtain security tokens and assertions. The class can also be used to parse assertions and inspect the claims within.
The component has built in support for working with Microsoft SharePoint Online and Microsoft Dynamics CRM Online. This support means only a minimum of information needs to be supplied to the component.
Microsoft SharePoint Online and Dynamics CRM Online
To begin working with SharePoint Online or Dynamics CRM Online first set the AuthMode to the appropriate value. The class will automatically populate several properties to known values. Set the User, Password, ApplicationURN properties and call GetSecurityToken. For instance:
component.AuthMode = SAMLAuthModes.amDynamicsCRM; //dynamic crm
component.User = "user@mycrm.onmicrosoft.com";
component.Password = "password";
component.ApplicationURN = "urn:crmapac:dynamics.com";
component.GetSecurityToken();
After calling GetSecurityToken the SecurityTokenXML property will be populated.
ADFS and Others
When working with ADFS or another Security Token Service (STS) the GetAssertion method may be used to obtain an assertion. To begin set AuthMode to either amADFS or amCustom. Then set LocalSTS, User, Password, and ApplicationURN. For instance:
component.AuthMode = SAMLAuthModes.amADFS;
component.User = "administrator";
component.Password = "admin";
component.LocalSTS = "https://adfs.contoso.com";
component.ApplicationURN = "https://fsweb.contoso.com/ClaimsAwareWebAppWithManagedSTS/";
component.GetAssertion();
If the assertion is signed the class will use the certificate specified in SignerCert
to verify the signature. If SignerCert is not set the class will attempt to parse
the certificate present in the assertion to perform verification.
After the assertion is parsed and the signature is verified (if present) the following properties will be populated:
- AssertionId
- AssertionIssueInstant
- AssertionIssuer
- AssertionNotBefore
- AssertionNotOnOrAfter
- AssertionSubject
- AssertionVersion
- AssertionXML
- Claim* properties
Parsing an Assertion
The class may also be used to parse an existing assertion without contacting a STS. To parse an existing assertion call ParseAssertion with the assertion XML. If the assertion is signed the class will use the certificate specified in SignerCert to verify the signature. If SignerCert is not set the class will attempt to parse the certificate present in the assertion to perform verification.
After the assertion is parsed and the signature is verified (if present) the following properties will be populated:
- AssertionId
- AssertionIssueInstant
- AssertionIssuer
- AssertionNotBefore
- AssertionNotOnOrAfter
- AssertionSubject
- AssertionVersion
- AssertionXML
- Claim* properties
Property List
The following is the full list of the properties of the module with short descriptions. Click on the links for further details.
ApplicationURN | The application's Uniform Resource Name (URN). |
AssertionId | The assertion id. |
AssertionIssueInstant | The time in UTC that the assertion was issued. |
AssertionIssuer | The assertion issuer. |
AssertionNotBefore | The date on which the assertion becomes valid. |
AssertionNotOnOrAfter | The time at which the assertion expires. |
AssertionSubject | The subject of the assertion. |
AssertionVersion | The version of the assertion. |
AssertionXML | The assertion XML. |
AuthMode | The authentication mode. |
CertEncoded | This is the certificate (PEM/Base64 encoded). |
CertStore | This is the name of the certificate store for the client certificate. |
CertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
CertStoreType | This is the type of certificate store for this certificate. |
CertSubject | This is the subject of the certificate used for client authentication. |
Claims | A collection of claims. |
FederationSTS | The URL of the federation Security Token Service (STS). |
FederationURN | The federation Uniform Resource Name (URN). |
LocalSTS | The local Security Token Service (STS). |
Password | The user's password. |
Proxy | A set of properties related to proxy access. |
SecurityTokenXML | The security token XML. |
SignerCertEncoded | This is the certificate (PEM/Base64 encoded). |
SignerCertStore | This is the name of the certificate store for the client certificate. |
SignerCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SignerCertStoreType | This is the type of certificate store for this certificate. |
SignerCertSubject | This is the subject of the certificate used for client authentication. |
SSLAcceptServerCertEncoded | This is the certificate (PEM/Base64 encoded). |
SSLCertEncoded | This is the certificate (PEM/Base64 encoded). |
SSLCertStore | This is the name of the certificate store for the client certificate. |
SSLCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SSLCertStoreType | This is the type of certificate store for this certificate. |
SSLCertSubject | This is the subject of the certificate used for client authentication. |
SSLProvider | This specifies the SSL/TLS implementation to use. |
SSLServerCertEncoded | This is the certificate (PEM/Base64 encoded). |
User | The username. |
XAttributes | A collection of attributes of the current element. |
XChildren | Collection of child elements of the currently selected XML element. |
XElement | The name of the current element. |
XNamespace | The namespace of the current element. |
XParent | The parent of the current element. |
XPath | Provides a way to point to a specific element in the document. |
XPrefix | The prefix of the current element. |
XSubTree | A snapshot of the current element in the document. |
XText | The text of the current element. |
Method List
The following is the full list of the methods of the module with short descriptions. Click on the links for further details.
Config | Sets or retrieves a configuration setting. |
GetAssertion | Gets the assertion. |
GetSecurityToken | Gets the security token. |
ParseAssertion | Parses the specified assertion. |
Event List
The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.
Characters | Fired for plain text segments of the input stream. |
Comment | Fired when a comment section is encountered. |
EndElement | Fired when an end-element tag is encountered. |
Error | Fired when information is available about errors during data delivery. |
PI | Fired when a processing instruction section is encountered. |
SSLServerAuthentication | Fired after the server presents its certificate to the client. |
SSLStatus | Fired when secure connection progress messages are available. |
StartElement | Fired when a begin-element tag is encountered in the document. |
Config Settings
The following is a list of config settings for the module with short descriptions. Click on the links for further details.
AssertionAudienceCount | Specifies the number of Audience elements found in the assertion. |
AssertionAudienceValue[i] | Contains the audience value at the specified index. |
AssertionXPath | The XPath to the assertion. |
AssertionXPath | The XPath to the assertion. |
DecryptAssertion | Whether to decrypt the assertion. |
EncryptedAssertionXPath | The XPath to the encrypted assertion. |
RawRequest | Returns the raw HTTP request. |
RawResponse | Returns the raw HTTP response. |
UserRealm | The URL of a web service to determine the LocalSTS (if any). |
BuildInfo | Information about the product's build. |
CodePage | The system code page used for Unicode to Multibyte translations. |
LicenseInfo | Information about the current license. |
MaskSensitive | Whether sensitive data is masked in log messages. |
UseInternalSecurityAPI | Whether or not to use the system security libraries or an internal implementation. |
ApplicationURN Property (SAML Module)
The application's Uniform Resource Name (URN).
Syntax
public var applicationURN: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=applicationURN,setter=setApplicationURN:) NSString* applicationURN; - (NSString*)applicationURN; - (void)setApplicationURN :(NSString*)newApplicationURN;
Default Value
""
Remarks
This property specifies the application's Uniform Resource Name (URN). This must be set before calling GetAssertion or GetSecurityToken.
When AuthMode is set to amDynamicsCRM the value specified here depends on the location of the account. Valid values are:
Dynamics CRM Location | URN |
North America | urn:crmna:dynamics.com |
EMEA | urn:crmemea:dynamics.com |
APAC | urn:crmapac:dynamics.com |
When AuthMode is set to camSharePointOnline this value is typically the URL to your site. For instance: "https://mycrm.sharepoint.com".
AssertionId Property (SAML Module)
The assertion id.
Syntax
public var assertionId: String { get {...} }
@property (nonatomic,readonly,assign,getter=assertionId) NSString* assertionId; - (NSString*)assertionId;
Default Value
""
Remarks
This property hold the id of the assertion.
This property is read-only.
AssertionIssueInstant Property (SAML Module)
The time in UTC that the assertion was issued.
Syntax
public var assertionIssueInstant: String { get {...} }
@property (nonatomic,readonly,assign,getter=assertionIssueInstant) NSString* assertionIssueInstant; - (NSString*)assertionIssueInstant;
Default Value
""
Remarks
This property holds the time that the assertion was issued.
This is in the standard xsd:dateTime format "YYYY-MM-DDThh:mm:ss". The date is specified in UTC.
This property is read-only.
AssertionIssuer Property (SAML Module)
The assertion issuer.
Syntax
public var assertionIssuer: String { get {...} }
@property (nonatomic,readonly,assign,getter=assertionIssuer) NSString* assertionIssuer; - (NSString*)assertionIssuer;
Default Value
""
Remarks
This property holds the issuer of the assertion.
This property is read-only.
AssertionNotBefore Property (SAML Module)
The date on which the assertion becomes valid.
Syntax
public var assertionNotBefore: String { get {...} }
@property (nonatomic,readonly,assign,getter=assertionNotBefore) NSString* assertionNotBefore; - (NSString*)assertionNotBefore;
Default Value
""
Remarks
This property specifies the earliest time instant at which the assertion is valid.
This is in the standard xsd:dateTime format "YYYY-MM-DDThh:mm:ss". The date is specified in UTC.
This property is read-only.
AssertionNotOnOrAfter Property (SAML Module)
The time at which the assertion expires.
Syntax
public var assertionNotOnOrAfter: String { get {...} }
@property (nonatomic,readonly,assign,getter=assertionNotOnOrAfter) NSString* assertionNotOnOrAfter; - (NSString*)assertionNotOnOrAfter;
Default Value
""
Remarks
This property specifies the time instant at which the assertion has expired.
This is in the standard xsd:dateTime format "YYYY-MM-DDThh:mm:ss". The date is specified in UTC.
This property is read-only.
AssertionSubject Property (SAML Module)
The subject of the assertion.
Syntax
public var assertionSubject: String { get {...} }
@property (nonatomic,readonly,assign,getter=assertionSubject) NSString* assertionSubject; - (NSString*)assertionSubject;
Default Value
""
Remarks
This property holds the subject of the assertion.
This property is read-only.
AssertionVersion Property (SAML Module)
The version of the assertion.
Syntax
public var assertionVersion: SamlAssertionVersions { get {...} set {...} }
public enum SamlAssertionVersions: Int32 { case svSAMLv11 = 0 case svSAMLv20 = 1 }
@property (nonatomic,readwrite,assign,getter=assertionVersion,setter=setAssertionVersion:) int assertionVersion; - (int)assertionVersion; - (void)setAssertionVersion :(int)newAssertionVersion;
Default Value
0
Remarks
This property specifies the version of the assertion. This may be set before calling GetAssertion. This will be populated after calling ParseAssertion. Possible values are:
0 (svSAMLv11 - default) | SAML version 1.1 |
1 (svSAMLv20) | SAML version 2.0 |
AssertionXML Property (SAML Module)
The assertion XML.
Syntax
public var assertionXML: String { get {...} }
@property (nonatomic,readonly,assign,getter=assertionXML) NSString* assertionXML; - (NSString*)assertionXML;
Default Value
""
Remarks
This property holds the returned assertion. This is populated after calling GetAssertion.
This property is read-only.
AuthMode Property (SAML Module)
The authentication mode.
Syntax
public var authMode: SamlAuthModes { get {...} set {...} }
public enum SamlAuthModes: Int32 { case camSharePointOnline = 0 case camDynamicsCRM = 1 case camADFS = 2 case camCustom = 3 }
@property (nonatomic,readwrite,assign,getter=authMode,setter=setAuthMode:) int authMode; - (int)authMode; - (void)setAuthMode :(int)newAuthMode;
Default Value
0
Remarks
This property specifies the authentication mode. Possible values are:
0 (camSharePointOnline - default) | Microsoft SharePoint Online |
1 (camDynamicsCRM) | Microsoft Dynamics CRM |
2 (camADFS) | Active Directory Federation Services |
3 (camCustom) | Custom |
When this property is set the component is initialized based on common settings for the selected mode.
Setting this property to 2 (camADFS) or 3 (camCustom) will clear the values in FederationURN, and FederationSTS. There is no functional difference between 2 (camADFS) and 3 (camCustom), they operate identically.
Setting this property to 0 (camSharePointOnline) or 1 (camDynamicsCRM) will populate FederationURN, and FederationSTS with known valid values for FederationURN, and FederationSTS.
The table below shows which properties are set depending on the value of this property.
AuthMode | FederationURN | FederationSTS | UserRealm |
camSharePointOnline | urn:federation:MicrosoftOnline | "https://login.microsoftonline.com/RST2.srf" | "https://login.microsoftonline.com/GetUserRealm.srf" |
camDynamicsCRM | urn:federation:MicrosoftOnline | "https://login.microsoftonline.com/RST2.srf" | "https://login.microsoftonline.com/GetUserRealm.srf" |
camADFS | "" | "" | "" |
camCustom | "" | "" | "" |
The value 3 (camCustom) may be used with any STS as long as WS-TRUST is supported.
CertEncoded Property (SAML Module)
This is the certificate (PEM/Base64 encoded).
Syntax
public var certEncoded: String { get {...} set {...} }
public var certEncodedB: Data { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=certEncoded,setter=setCertEncoded:) NSString* certEncoded; - (NSString*)certEncoded; - (void)setCertEncoded :(NSString*)newCertEncoded; @property (nonatomic,readwrite,assign,getter=certEncodedB,setter=setCertEncodedB:) NSData* certEncodedB; - (NSData*)certEncodedB; - (void)setCertEncodedB :(NSData*)newCertEncoded;
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The CertStore and CertSubject properties also may be used to specify a certificate.
When CertEncoded is set, a search is initiated in the current CertStore for the private key of the certificate. If the key is found, CertSubject is updated to reflect the full subject of the selected certificate; otherwise, CertSubject is set to an empty string.
If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:
public func setCertEncodedB(certEncoded: Data) throws public func setCertEncoded(certEncoded: String) throws
CertStore Property (SAML Module)
This is the name of the certificate store for the client certificate.
Syntax
public var certStore: String { get {...} set {...} }
public var certStoreB: Data { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=certStore,setter=setCertStore:) NSString* certStore; - (NSString*)certStore; - (void)setCertStore :(NSString*)newCertStore; @property (nonatomic,readwrite,assign,getter=certStoreB,setter=setCertStoreB:) NSData* certStoreB; - (NSData*)certStoreB; - (void)setCertStoreB :(NSData*)newCertStore;
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The CertStoreType property denotes the type of the certificate store specified by CertStore. If the store is password protected, specify the password in CertStorePassword.
CertStore is used in conjunction with the CertSubject property to specify client certificates. If CertStore has a value, and CertSubject or CertEncoded is set, a search for a certificate is initiated. Please see the CertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
CertStorePassword Property (SAML Module)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
public var certStorePassword: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=certStorePassword,setter=setCertStorePassword:) NSString* certStorePassword; - (NSString*)certStorePassword; - (void)setCertStorePassword :(NSString*)newCertStorePassword;
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
CertStoreType Property (SAML Module)
This is the type of certificate store for this certificate.
Syntax
public var certStoreType: SamlCertStoreTypes { get {...} set {...} }
public enum SamlCertStoreTypes: Int32 { case cstUser = 0 case cstMachine = 1 case cstPFXFile = 2 case cstPFXBlob = 3 case cstJKSFile = 4 case cstJKSBlob = 5 case cstPEMKeyFile = 6 case cstPEMKeyBlob = 7 case cstPublicKeyFile = 8 case cstPublicKeyBlob = 9 case cstSSHPublicKeyBlob = 10 case cstP7BFile = 11 case cstP7BBlob = 12 case cstSSHPublicKeyFile = 13 case cstPPKFile = 14 case cstPPKBlob = 15 case cstXMLFile = 16 case cstXMLBlob = 17 case cstJWKFile = 18 case cstJWKBlob = 19 case cstSecurityKey = 20 case cstBCFKSFile = 21 case cstBCFKSBlob = 22 case cstPKCS11 = 23 case cstAuto = 99 }
@property (nonatomic,readwrite,assign,getter=certStoreType,setter=setCertStoreType:) int certStoreType; - (int)certStoreType; - (void)setCertStoreType :(int)newCertStoreType;
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the CertStore and set CertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
CertSubject Property (SAML Module)
This is the subject of the certificate used for client authentication.
Syntax
public var certSubject: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=certSubject,setter=setCertSubject:) NSString* certSubject; - (NSString*)certSubject; - (void)setCertSubject :(NSString*)newCertSubject;
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:
public func setCertSubject(certSubject: String) throws
Claims Property (SAML Module)
A collection of claims.
Syntax
public var claims: Array<Claim> { get {...} }
@property (nonatomic,readonly,assign,getter=claimCount) int claimCount; - (int)claimCount; - (NSString*)claimIssuerName:(int)claimIndex; - (NSString*)claimOriginalIssuer:(int)claimIndex; - (int)claimPropertyCount:(int)claimIndex; - (int)claimPropertyIndex:(int)claimIndex; - (void)setClaimPropertyIndex:(int)claimIndex :(int)newClaimPropertyIndex; - (NSString*)claimPropertyName:(int)claimIndex; - (NSString*)claimPropertyValue:(int)claimIndex; - (NSString*)claimTypeName:(int)claimIndex; - (NSString*)claimValue:(int)claimIndex; - (NSString*)claimValueType:(int)claimIndex;
Default Value
""
Remarks
This property is a collection of claims parsed from the assertion. This is populated after calling GetAssertion or ParseAssertion.
FederationSTS Property (SAML Module)
The URL of the federation Security Token Service (STS).
Syntax
public var federationSTS: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=federationSTS,setter=setFederationSTS:) NSString* federationSTS; - (NSString*)federationSTS; - (void)setFederationSTS :(NSString*)newFederationSTS;
Default Value
""
Remarks
This property specifies the URL of the federation Security Token Service (STS). When AuthMode is set to 0 (camSharePointOnline) or 1 (camDynamicsCRM) this property is automatically populated.
FederationURN Property (SAML Module)
The federation Uniform Resource Name (URN).
Syntax
public var federationURN: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=federationURN,setter=setFederationURN:) NSString* federationURN; - (NSString*)federationURN; - (void)setFederationURN :(NSString*)newFederationURN;
Default Value
""
Remarks
This property specifies the federation Uniform Resource Name (URN). This property is automatically populated when AuthMode is set to 0 (camSharePointOnline) or 1 (camDynamicsCRM).
LocalSTS Property (SAML Module)
The local Security Token Service (STS).
Syntax
public var localSTS: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=localSTS,setter=setLocalSTS:) NSString* localSTS; - (NSString*)localSTS; - (void)setLocalSTS :(NSString*)newLocalSTS;
Default Value
""
Remarks
This property specifies the URL of the local Security Token Service(STS).
When AuthMode is set to 0 (camSharePointOnline) or 1 (camDynamicsCRM) if this is not specified, then the class will attempt to determine this value automatically by querying the UserRealm.
When AuthMode is set to 2 (camADFS) or 3 (camCustom) this property is required.
Password Property (SAML Module)
The user's password.
Syntax
public var password: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=password,setter=setPassword:) NSString* password; - (NSString*)password; - (void)setPassword :(NSString*)newPassword;
Default Value
""
Remarks
This property specifies the user's password. This must be set before calling GetAssertion or GetSecurityToken.
Proxy Property (SAML Module)
A set of properties related to proxy access.
Syntax
public var proxy: Proxy { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=proxyAuthScheme,setter=setProxyAuthScheme:) int proxyAuthScheme; - (int)proxyAuthScheme; - (void)setProxyAuthScheme :(int)newProxyAuthScheme; @property (nonatomic,readwrite,assign,getter=proxyAutoDetect,setter=setProxyAutoDetect:) BOOL proxyAutoDetect; - (BOOL)proxyAutoDetect; - (void)setProxyAutoDetect :(BOOL)newProxyAutoDetect; @property (nonatomic,readwrite,assign,getter=proxyPassword,setter=setProxyPassword:) NSString* proxyPassword; - (NSString*)proxyPassword; - (void)setProxyPassword :(NSString*)newProxyPassword; @property (nonatomic,readwrite,assign,getter=proxyPort,setter=setProxyPort:) int proxyPort; - (int)proxyPort; - (void)setProxyPort :(int)newProxyPort; @property (nonatomic,readwrite,assign,getter=proxyServer,setter=setProxyServer:) NSString* proxyServer; - (NSString*)proxyServer; - (void)setProxyServer :(NSString*)newProxyServer; @property (nonatomic,readwrite,assign,getter=proxySSL,setter=setProxySSL:) int proxySSL; - (int)proxySSL; - (void)setProxySSL :(int)newProxySSL; @property (nonatomic,readwrite,assign,getter=proxyUser,setter=setProxyUser:) NSString* proxyUser; - (NSString*)proxyUser; - (void)setProxyUser :(NSString*)newProxyUser;
Default Value
""
Remarks
This property contains fields describing the proxy through which the class will attempt to connect.
SecurityTokenXML Property (SAML Module)
The security token XML.
Syntax
public var securityTokenXML: String { get {...} }
@property (nonatomic,readonly,assign,getter=securityTokenXML) NSString* securityTokenXML; - (NSString*)securityTokenXML;
Default Value
""
Remarks
This property holds the security token. This is populated after calling GetSecurityToken.
This property is read-only.
SignerCertEncoded Property (SAML Module)
This is the certificate (PEM/Base64 encoded).
Syntax
public var signerCertEncoded: String { get {...} set {...} }
public var signerCertEncodedB: Data { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=signerCertEncoded,setter=setSignerCertEncoded:) NSString* signerCertEncoded; - (NSString*)signerCertEncoded; - (void)setSignerCertEncoded :(NSString*)newSignerCertEncoded; @property (nonatomic,readwrite,assign,getter=signerCertEncodedB,setter=setSignerCertEncodedB:) NSData* signerCertEncodedB; - (NSData*)signerCertEncodedB; - (void)setSignerCertEncodedB :(NSData*)newSignerCertEncoded;
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SignerCertStore and SignerCertSubject properties also may be used to specify a certificate.
When SignerCertEncoded is set, a search is initiated in the current SignerCertStore for the private key of the certificate. If the key is found, SignerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SignerCertSubject is set to an empty string.
If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:
public func setSignerCertEncodedB(signerCertEncoded: Data) throws public func setSignerCertEncoded(signerCertEncoded: String) throws
SignerCertStore Property (SAML Module)
This is the name of the certificate store for the client certificate.
Syntax
public var signerCertStore: String { get {...} set {...} }
public var signerCertStoreB: Data { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=signerCertStore,setter=setSignerCertStore:) NSString* signerCertStore; - (NSString*)signerCertStore; - (void)setSignerCertStore :(NSString*)newSignerCertStore; @property (nonatomic,readwrite,assign,getter=signerCertStoreB,setter=setSignerCertStoreB:) NSData* signerCertStoreB; - (NSData*)signerCertStoreB; - (void)setSignerCertStoreB :(NSData*)newSignerCertStore;
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The SignerCertStoreType property denotes the type of the certificate store specified by SignerCertStore. If the store is password protected, specify the password in SignerCertStorePassword.
SignerCertStore is used in conjunction with the SignerCertSubject property to specify client certificates. If SignerCertStore has a value, and SignerCertSubject or SignerCertEncoded is set, a search for a certificate is initiated. Please see the SignerCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
SignerCertStorePassword Property (SAML Module)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
public var signerCertStorePassword: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=signerCertStorePassword,setter=setSignerCertStorePassword:) NSString* signerCertStorePassword; - (NSString*)signerCertStorePassword; - (void)setSignerCertStorePassword :(NSString*)newSignerCertStorePassword;
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SignerCertStoreType Property (SAML Module)
This is the type of certificate store for this certificate.
Syntax
public var signerCertStoreType: SamlSignerCertStoreTypes { get {...} set {...} }
public enum SamlSignerCertStoreTypes: Int32 { case cstUser = 0 case cstMachine = 1 case cstPFXFile = 2 case cstPFXBlob = 3 case cstJKSFile = 4 case cstJKSBlob = 5 case cstPEMKeyFile = 6 case cstPEMKeyBlob = 7 case cstPublicKeyFile = 8 case cstPublicKeyBlob = 9 case cstSSHPublicKeyBlob = 10 case cstP7BFile = 11 case cstP7BBlob = 12 case cstSSHPublicKeyFile = 13 case cstPPKFile = 14 case cstPPKBlob = 15 case cstXMLFile = 16 case cstXMLBlob = 17 case cstJWKFile = 18 case cstJWKBlob = 19 case cstSecurityKey = 20 case cstBCFKSFile = 21 case cstBCFKSBlob = 22 case cstPKCS11 = 23 case cstAuto = 99 }
@property (nonatomic,readwrite,assign,getter=signerCertStoreType,setter=setSignerCertStoreType:) int signerCertStoreType; - (int)signerCertStoreType; - (void)setSignerCertStoreType :(int)newSignerCertStoreType;
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SignerCertStore and set SignerCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
SignerCertSubject Property (SAML Module)
This is the subject of the certificate used for client authentication.
Syntax
public var signerCertSubject: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=signerCertSubject,setter=setSignerCertSubject:) NSString* signerCertSubject; - (NSString*)signerCertSubject; - (void)setSignerCertSubject :(NSString*)newSignerCertSubject;
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:
public func setSignerCertSubject(signerCertSubject: String) throws
SSLAcceptServerCertEncoded Property (SAML Module)
This is the certificate (PEM/Base64 encoded).
Syntax
public var sslAcceptServerCertEncoded: String { get {...} set {...} }
public var sslAcceptServerCertEncodedB: Data { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=SSLAcceptServerCertEncoded,setter=setSSLAcceptServerCertEncoded:) NSString* SSLAcceptServerCertEncoded; - (NSString*)SSLAcceptServerCertEncoded; - (void)setSSLAcceptServerCertEncoded :(NSString*)newSSLAcceptServerCertEncoded; @property (nonatomic,readwrite,assign,getter=SSLAcceptServerCertEncodedB,setter=setSSLAcceptServerCertEncodedB:) NSData* SSLAcceptServerCertEncodedB; - (NSData*)SSLAcceptServerCertEncodedB; - (void)setSSLAcceptServerCertEncodedB :(NSData*)newSSLAcceptServerCertEncoded;
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.
When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.
If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:
public func setSSLAcceptServerCertEncodedB(sslAcceptServerCertEncoded: Data) throws public func setSSLAcceptServerCertEncoded(sslAcceptServerCertEncoded: String) throws
SSLCertEncoded Property (SAML Module)
This is the certificate (PEM/Base64 encoded).
Syntax
public var sslCertEncoded: String { get {...} set {...} }
public var sslCertEncodedB: Data { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=SSLCertEncoded,setter=setSSLCertEncoded:) NSString* SSLCertEncoded; - (NSString*)SSLCertEncoded; - (void)setSSLCertEncoded :(NSString*)newSSLCertEncoded; @property (nonatomic,readwrite,assign,getter=SSLCertEncodedB,setter=setSSLCertEncodedB:) NSData* SSLCertEncodedB; - (NSData*)SSLCertEncodedB; - (void)setSSLCertEncodedB :(NSData*)newSSLCertEncoded;
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.
When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.
If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:
public func setSSLCertEncodedB(sslCertEncoded: Data) throws public func setSSLCertEncoded(sslCertEncoded: String) throws
SSLCertStore Property (SAML Module)
This is the name of the certificate store for the client certificate.
Syntax
public var sslCertStore: String { get {...} set {...} }
public var sslCertStoreB: Data { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=SSLCertStore,setter=setSSLCertStore:) NSString* SSLCertStore; - (NSString*)SSLCertStore; - (void)setSSLCertStore :(NSString*)newSSLCertStore; @property (nonatomic,readwrite,assign,getter=SSLCertStoreB,setter=setSSLCertStoreB:) NSData* SSLCertStoreB; - (NSData*)SSLCertStoreB; - (void)setSSLCertStoreB :(NSData*)newSSLCertStore;
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.
SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
SSLCertStorePassword Property (SAML Module)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
public var sslCertStorePassword: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=SSLCertStorePassword,setter=setSSLCertStorePassword:) NSString* SSLCertStorePassword; - (NSString*)SSLCertStorePassword; - (void)setSSLCertStorePassword :(NSString*)newSSLCertStorePassword;
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSLCertStoreType Property (SAML Module)
This is the type of certificate store for this certificate.
Syntax
public var sslCertStoreType: SamlSSLCertStoreTypes { get {...} set {...} }
public enum SamlSSLCertStoreTypes: Int32 { case cstUser = 0 case cstMachine = 1 case cstPFXFile = 2 case cstPFXBlob = 3 case cstJKSFile = 4 case cstJKSBlob = 5 case cstPEMKeyFile = 6 case cstPEMKeyBlob = 7 case cstPublicKeyFile = 8 case cstPublicKeyBlob = 9 case cstSSHPublicKeyBlob = 10 case cstP7BFile = 11 case cstP7BBlob = 12 case cstSSHPublicKeyFile = 13 case cstPPKFile = 14 case cstPPKBlob = 15 case cstXMLFile = 16 case cstXMLBlob = 17 case cstJWKFile = 18 case cstJWKBlob = 19 case cstSecurityKey = 20 case cstBCFKSFile = 21 case cstBCFKSBlob = 22 case cstPKCS11 = 23 case cstAuto = 99 }
@property (nonatomic,readwrite,assign,getter=SSLCertStoreType,setter=setSSLCertStoreType:) int SSLCertStoreType; - (int)SSLCertStoreType; - (void)setSSLCertStoreType :(int)newSSLCertStoreType;
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLCertStore and set SSLCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
SSLCertSubject Property (SAML Module)
This is the subject of the certificate used for client authentication.
Syntax
public var sslCertSubject: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=SSLCertSubject,setter=setSSLCertSubject:) NSString* SSLCertSubject; - (NSString*)SSLCertSubject; - (void)setSSLCertSubject :(NSString*)newSSLCertSubject;
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:
public func setSSLCertSubject(sslCertSubject: String) throws
SSLProvider Property (SAML Module)
This specifies the SSL/TLS implementation to use.
Syntax
public var sslProvider: SamlSSLProviders { get {...} set {...} }
public enum SamlSSLProviders: Int32 { case sslpAutomatic = 0 case sslpPlatform = 1 case sslpInternal = 2 }
@property (nonatomic,readwrite,assign,getter=SSLProvider,setter=setSSLProvider:) int SSLProvider; - (int)SSLProvider; - (void)setSSLProvider :(int)newSSLProvider;
Default Value
0
Remarks
This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.
Possible values are:
0 (sslpAutomatic - default) | Automatically selects the appropriate implementation. |
1 (sslpPlatform) | Uses the platform/system implementation. |
2 (sslpInternal) | Uses the internal implementation. |
In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.
When Automatic is selected the platform implementation will be used by default in all cases in the macOS edition.
SSLServerCertEncoded Property (SAML Module)
This is the certificate (PEM/Base64 encoded).
Syntax
public var sslServerCertEncoded: String { get {...} }
public var sslServerCertEncodedB: Data { get {...} }
@property (nonatomic,readonly,assign,getter=SSLServerCertEncoded) NSString* SSLServerCertEncoded; - (NSString*)SSLServerCertEncoded; @property (nonatomic,readonly,assign,getter=SSLServerCertEncodedB) NSData* SSLServerCertEncodedB; - (NSData*)SSLServerCertEncodedB;
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.
When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.
This property is read-only.
If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:
public func setSSLServerCertEncodedB(sslServerCertEncoded: Data) throws public func setSSLServerCertEncoded(sslServerCertEncoded: String) throws
User Property (SAML Module)
The username.
Syntax
public var user: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=user,setter=setUser:) NSString* user; - (NSString*)user; - (void)setUser :(NSString*)newUser;
Default Value
""
Remarks
This property specifies the username. This must be set before calling GetAssertion or GetSecurityToken.
XAttributes Property (SAML Module)
A collection of attributes of the current element.
Syntax
public var xAttributes: Array<XMLAttribute> { get {...} }
@property (nonatomic,readwrite,assign,getter=attrCount,setter=setAttrCount:) int attrCount; - (int)attrCount; - (void)setAttrCount :(int)newAttrCount; - (NSString*)attrName:(int)attrIndex; - (NSString*)attrNamespace:(int)attrIndex; - (NSString*)attrPrefix:(int)attrIndex; - (NSString*)attrValue:(int)attrIndex;
Default Value
""
Remarks
This collection consists of all attributes of the current XML element. The component parses each attribute into a collection of XMLAttribute types.
XChildren Property (SAML Module)
Collection of child elements of the currently selected XML element.
Syntax
public var xChildren: Array<XMLElement> { get {...} }
@property (nonatomic,readwrite,assign,getter=XChildCount,setter=setXChildCount:) int XChildCount; - (int)XChildCount; - (void)setXChildCount :(int)newXChildCount; - (NSString*)XChildName:(int)xChildIndex; - (NSString*)XChildNamespace:(int)xChildIndex; - (NSString*)XChildPrefix:(int)xChildIndex; - (NSString*)XChildXText:(int)xChildIndex;
Default Value
""
Remarks
This property contains a collection of child elements of the currently selected XML element. The elements are provided in the collection in the same order they are found in the XML document.
XElement Property (SAML Module)
The name of the current element.
Syntax
public var xElement: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=XElement,setter=setXElement:) NSString* XElement; - (NSString*)XElement; - (void)setXElement :(NSString*)newXElement;
Default Value
""
Remarks
The current element is specified via the XPath property.
XNamespace Property (SAML Module)
The namespace of the current element.
Syntax
public var xNamespace: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=XNamespace,setter=setXNamespace:) NSString* XNamespace; - (NSString*)XNamespace; - (void)setXNamespace :(NSString*)newXNamespace;
Default Value
""
Remarks
The current element is specified via the XPath property.
XParent Property (SAML Module)
The parent of the current element.
Syntax
public var xParent: String { get {...} }
@property (nonatomic,readonly,assign,getter=XParent) NSString* XParent; - (NSString*)XParent;
Default Value
""
Remarks
The current element is specified via the XPath property.
This property is read-only.
XPath Property (SAML Module)
Provides a way to point to a specific element in the document.
Syntax
public var xPath: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=XPath,setter=setXPath:) NSString* XPath; - (NSString*)XPath; - (void)setXPath :(NSString*)newXPath;
Default Value
""
Remarks
XPath implements a subset of the XML XPath specification, allowing you to point to specific elements in the XML documents.
The path is a series of one or more element accessors separated by '/'. The path can be absolute (starting with '/') or relative to the current XPath location.
The following are possible values for an element accessor:
'name' | A particular element name |
name[i] | The i-th subelement of the current element with the given name |
[i] | The i-th subelement of the current element |
[last()] | The last subelement of the current element |
[last()-i] | The subelement located at the last location minus i in the current element |
name[@attrname="attrvalue"] | The subelement containing a particular value for a given attribute (supports single AND double quotes) |
.. | The parent of the current element |
BuildDOM must be set to True prior to parsing the document for the XPath functionality to be available.
Example (Setting XPath):
Document root | XML.XPath = "/" |
Specific Element | XML.XPath = "/root/SubElement1/SubElement2/" |
i-th Child | XML.XPath = "/root/SubElement1[i]" |
If an error occurs when setting this property an error will not be thrown. This property has a related method which will throw an error:
public func setXPath(xPath: String) throws
XPrefix Property (SAML Module)
The prefix of the current element.
Syntax
public var xPrefix: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=XPrefix,setter=setXPrefix:) NSString* XPrefix; - (NSString*)XPrefix; - (void)setXPrefix :(NSString*)newXPrefix;
Default Value
""
Remarks
The current element is specified via the XPath property.
XSubTree Property (SAML Module)
A snapshot of the current element in the document.
Syntax
public var xSubTree: String { get {...} }
@property (nonatomic,readonly,assign,getter=XSubTree) NSString* XSubTree; - (NSString*)XSubTree;
Default Value
""
Remarks
The current element is specified via the XPath property. In order for this property to work you must have the CacheContent set to true.
This property is read-only.
XText Property (SAML Module)
The text of the current element.
Syntax
public var xText: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=XText,setter=setXText:) NSString* XText; - (NSString*)XText; - (void)setXText :(NSString*)newXText;
Default Value
""
Remarks
The current element is specified via the XPath property.
Config Method (SAML Module)
Sets or retrieves a configuration setting.
Syntax
- (NSString*)config:(NSString*)configurationString;
Remarks
Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
GetAssertion Method (SAML Module)
Gets the assertion.
Syntax
public func getAssertion() throws -> Void
- (void)getAssertion;
Remarks
This method communicates with LocalSTS as to obtain an assertion.
When AuthMode is set to 0 (camSharePointOnline) or 1 (camDynamicsCRM) the class will automatically populate various properties to known values to reduce the number of required settings. Typically only the following properties are required:
When AuthMode is set to 2 (camADFS) or 3 (camCustom) the following properties are required:
If the assertion is signed the class will use the certificate specified in SignerCert to verify the signature. If SignerCert is not set the class will attempt to parse the certificate present in the assertion to perform verification.
After the assertion is parsed and the signature is verified (if present) the following properties will be populated:
- AssertionId
- AssertionIssueInstant
- AssertionIssuer
- AssertionNotBefore
- AssertionNotOnOrAfter
- AssertionSubject
- AssertionVersion
- AssertionXML
- Claim* properties
GetSecurityToken Method (SAML Module)
Gets the security token.
Syntax
public func getSecurityToken() throws -> Void
- (void)getSecurityToken;
Remarks
This method communicates with FederationSTS and LocalSTS as applicable to obtain a security token. The SecurityTokenXML property will be populated with the retrieved token.
When AuthMode is set to 0 (camSharePointOnline) or 1 (camDynamicsCRM) the class will automatically populate various properties to known values to reduce the number of required settings. Typically only the following properties are required:
When AuthMode is set to 2 (camADFS) or 3 (camCustom) the following properties are required:
ParseAssertion Method (SAML Module)
Parses the specified assertion.
Syntax
- (void)parseAssertion:(NSString*)assertion;
Remarks
This method parses the assertion specified by the assertion parameter. If the assertion is signed the class will use the certificate specified in SignerCert to verify the signature. If SignerCert is not set the class will attempt to parse the certificate present in the assertion to perform verification.
After the assertion is parsed and the signature is verified (if present) the following properties will be populated:
- AssertionId
- AssertionIssueInstant
- AssertionIssuer
- AssertionNotBefore
- AssertionNotOnOrAfter
- AssertionSubject
- AssertionVersion
- AssertionXML
- Claim* properties
Characters Event (SAML Module)
Fired for plain text segments of the input stream.
Syntax
func onCharacters(text: String)
- (void)onCharacters:(NSString*)text;
Remarks
The Characters event provides the plain text content of the XML document (i.e. the text inside the tags). The text is provided through the Text parameter.
The text includes white space as well as end of line characters, except for ignorable whitespace which is fired through the IgnorableWhitespace event.
Comment Event (SAML Module)
Fired when a comment section is encountered.
Syntax
func onComment(text: String)
- (void)onComment:(NSString*)text;
Remarks
The Comment event is fired whenever a comment section (<!-- ..text... -->) is found in the document.
The full text of the comment is provided by the Text parameter.
EndElement Event (SAML Module)
Fired when an end-element tag is encountered.
Syntax
- (void)onEndElement:(NSString*)namespace :(NSString*)element :(NSString*)QName :(BOOL)isEmpty;
Remarks
The EndElement event is fired when an end-element tag is found in the document.
The element name is provided by the Element parameter.
The IsEmpty parameter is true when the event corresponds with an empty element declaration.
Error Event (SAML Module)
Fired when information is available about errors during data delivery.
Syntax
- (void)onError:(int)errorCode :(NSString*)description;
Remarks
The Error event is fired in case of exceptional conditions during message processing. Normally the class .
The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.
PI Event (SAML Module)
Fired when a processing instruction section is encountered.
Syntax
func onPI(text: String)
- (void)onPI:(NSString*)text;
Remarks
The PI event is fired whenever a processing instruction section (<? ..text... ?>) is found in the document.
The full text of the processing instruction is provided by the Text parameter.
SSLServerAuthentication Event (SAML Module)
Fired after the server presents its certificate to the client.
Syntax
func onSSLServerAuthentication(certEncoded: Data, certSubject: String, certIssuer: String, status: String, accept: inout Bool)
- (void)onSSLServerAuthentication:(NSData*)certEncoded :(NSString*)certSubject :(NSString*)certIssuer :(NSString*)status :(int*)accept;
Remarks
During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.
When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.
SSLStatus Event (SAML Module)
Fired when secure connection progress messages are available.
Syntax
func onSSLStatus(message: String)
- (void)onSSLStatus:(NSString*)message;
Remarks
The event is fired for informational and logging purposes only. This event tracks the progress of the connection.
StartElement Event (SAML Module)
Fired when a begin-element tag is encountered in the document.
Syntax
- (void)onStartElement:(NSString*)namespace :(NSString*)element :(NSString*)QName :(BOOL)isEmpty;
Remarks
The StartElement event is fired when a begin-element tag is found in the document.
The element name is provided through the Element parameter. The attribute names and values (if any) are provided through the XAttributesName, XAttributesNamespace, XAttributesPrefix, and XAttributesValue properties.
The IsEmpty parameter is true when the event corresponds with an empty element declaration.
Claim Type
The claim.
Remarks
This type describes the claim.
Fields
issuerName
String (read-only)
Default Value: ""
The name of the issuer. This may be a URL like "http://adfs.contoso.com/adfs/services/trust".
originalIssuer
String (read-only)
Default Value: ""
The name of the original issuer. This may be a URL like "http://adfs.contoso.com/adfs/services/trust".
propertyCount
Int32 (read-only)
Default Value: 0
The number of properties in the claim.
propertyIndex
Int32
Default Value: 0
Selects a property. This is valid from 0 to .
To inspect a property, first set this property and then inspect and .
For instance:
for(int i=0;i<component.Claims[0].PropertyCount;i++)
{
component.Claims[0].PropertyIndex = i;
Console.WriteLine(component.Claims[0].PropertyName + ": " + component.Claims[0].PropertyValue);
}
propertyName
String (read-only)
Default Value: ""
The name of the property.
propertyValue
String (read-only)
Default Value: ""
The value of the property.
typeName
String (read-only)
Default Value: ""
The type name of the claim. This may be a value like "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier".
value
String (read-only)
Default Value: ""
The value of the claim.
valueType
String (read-only)
Default Value: ""
The type of value. This may be a value like "http://www.w3.org/2001/XMLSchema#string".
Constructors
public init()
public init(typeName: , value: , valueType: , issuerName: , originalIssuer: )
Proxy Type
The proxy the component will connect to.
Remarks
When connecting through a proxy, this type is used to specify different properties of the proxy, such as the and the .
Fields
authScheme
ProxyAuthSchemes
Default Value: 0
This property is used to tell the class which type of authorization to perform when connecting to the proxy. This is used only when the and properties are set.
should be set to authNone (3) when no authentication is expected.
By default, is authBasic (0), and if the and properties are set, the component will attempt basic authentication.
If is set to authDigest (1), digest authentication will be attempted instead.
If is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token.
If is set to authNtlm (4), NTLM authentication will be used.
For security reasons, setting this property will clear the values of and .
autoDetect
Bool
Default Value: False
This property tells the class whether or not to automatically detect and use proxy system settings, if available. The default value is .
password
String
Default Value: ""
This property contains a password if authentication is to be used for the proxy.
If is set to Basic Authentication, the and are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].
If is set to Digest Authentication, the and properties are used to respond to the Digest Authentication challenge from the server.
If is set to NTLM Authentication, the and properties are used to authenticate through NTLM negotiation.
port
Int32
Default Value: 80
This property contains the Transmission Control Protocol (TCP) port for the proxy (default 80). See the description of the property for details.
server
String
Default Value: ""
If a proxy is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.
If the property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the property is set to the corresponding address. If the search is not successful, an error is returned.
ssl
ProxySSLTypes
Default Value: 0
This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:
psAutomatic (0) | Default setting. If the URL is an https URL, the class will use the psTunnel option. If the URL is an http URL, the class will use the psNever option. |
psAlways (1) | The connection is always SSL enabled. |
psNever (2) | The connection is not SSL enabled. |
psTunnel (3) | The connection is made through a tunneling (HTTP) proxy. |
user
String
Default Value: ""
This property contains a username if authentication is to be used for the proxy.
If is set to Basic Authentication, the and properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].
If is set to Digest Authentication, the and properties are used to respond to the Digest Authentication challenge from the server.
If is set to NTLM Authentication, the and properties are used to authenticate through NTLM negotiation.
Constructors
public init()
public init(server: , port: )
public init(server: , port: , user: , password: )
XMLAttribute Type
An XML attribute from the current XML element.
Remarks
This type describes an XML attribute from the current element. It includes fields to denote information about the attribute being defined.
Fields
name
String (read-only)
Default Value: ""
The provides the local name (without prefix) of the attribute.
namespace
String (read-only)
Default Value: ""
Attribute namespace.
prefix
String (read-only)
Default Value: ""
Attribute prefix (if any). If the attribute does not have a prefix, this property is empty.
value
String (read-only)
Default Value: ""
Attribute value.
Constructors
public init()
XMLElement Type
An element contained within the XML document.
Remarks
This type describes an XML element. The fields for this type describe the element , , and of the given element.
The elements are inserted into the array in the same order they are found in the document.
Fields
name
String (read-only)
Default Value: ""
The property provides the local name (without prefix) of the element.
namespace
String (read-only)
Default Value: ""
Namespace of the element.
prefix
String (read-only)
Default Value: ""
Prefix of the element (if any). If the element does not have a prefix, this property is empty.
xText
String (read-only)
Default Value: ""
The inner text of the element.
Constructors
public init()
Config Settings (SAML Module)
The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.SAML Config Settings
int audCount = int.Parse(component.Config("AssertionAudienceCount"));
for(int i = 0; i < audCount; i++){
string curAudience = component.Config("AssertionAudienceValue[" + i + "]");
//...
}
saml.Config("AssertionXPath=/Response/Assertion");
saml.ParseAssertion(Assertion);
saml.Config("AssertionXPath=/Response/Assertion");
saml.ParseAssertion(Assertion);
saml.Config("EncryptedAssertionXPath=/Response/EncryptedAssertion"");
saml.ParseAssertion(Assertion);
component.GetAssertion();
MyString = component.Config("RawRequest");
component.GetAssertion();
MyString = component.Config("RawResponse");
Base Config Settings
The following is a list of valid code page identifiers:
Identifier | Name |
037 | IBM EBCDIC - U.S./Canada |
437 | OEM - United States |
500 | IBM EBCDIC - International |
708 | Arabic - ASMO 708 |
709 | Arabic - ASMO 449+, BCON V4 |
710 | Arabic - Transparent Arabic |
720 | Arabic - Transparent ASMO |
737 | OEM - Greek (formerly 437G) |
775 | OEM - Baltic |
850 | OEM - Multilingual Latin I |
852 | OEM - Latin II |
855 | OEM - Cyrillic (primarily Russian) |
857 | OEM - Turkish |
858 | OEM - Multilingual Latin I + Euro symbol |
860 | OEM - Portuguese |
861 | OEM - Icelandic |
862 | OEM - Hebrew |
863 | OEM - Canadian-French |
864 | OEM - Arabic |
865 | OEM - Nordic |
866 | OEM - Russian |
869 | OEM - Modern Greek |
870 | IBM EBCDIC - Multilingual/ROECE (Latin-2) |
874 | ANSI/OEM - Thai (same as 28605, ISO 8859-15) |
875 | IBM EBCDIC - Modern Greek |
932 | ANSI/OEM - Japanese, Shift-JIS |
936 | ANSI/OEM - Simplified Chinese (PRC, Singapore) |
949 | ANSI/OEM - Korean (Unified Hangul Code) |
950 | ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) |
1026 | IBM EBCDIC - Turkish (Latin-5) |
1047 | IBM EBCDIC - Latin 1/Open System |
1140 | IBM EBCDIC - U.S./Canada (037 + Euro symbol) |
1141 | IBM EBCDIC - Germany (20273 + Euro symbol) |
1142 | IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) |
1143 | IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) |
1144 | IBM EBCDIC - Italy (20280 + Euro symbol) |
1145 | IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) |
1146 | IBM EBCDIC - United Kingdom (20285 + Euro symbol) |
1147 | IBM EBCDIC - France (20297 + Euro symbol) |
1148 | IBM EBCDIC - International (500 + Euro symbol) |
1149 | IBM EBCDIC - Icelandic (20871 + Euro symbol) |
1200 | Unicode UCS-2 Little-Endian (BMP of ISO 10646) |
1201 | Unicode UCS-2 Big-Endian |
1250 | ANSI - Central European |
1251 | ANSI - Cyrillic |
1252 | ANSI - Latin I |
1253 | ANSI - Greek |
1254 | ANSI - Turkish |
1255 | ANSI - Hebrew |
1256 | ANSI - Arabic |
1257 | ANSI - Baltic |
1258 | ANSI/OEM - Vietnamese |
1361 | Korean (Johab) |
10000 | MAC - Roman |
10001 | MAC - Japanese |
10002 | MAC - Traditional Chinese (Big5) |
10003 | MAC - Korean |
10004 | MAC - Arabic |
10005 | MAC - Hebrew |
10006 | MAC - Greek I |
10007 | MAC - Cyrillic |
10008 | MAC - Simplified Chinese (GB 2312) |
10010 | MAC - Romania |
10017 | MAC - Ukraine |
10021 | MAC - Thai |
10029 | MAC - Latin II |
10079 | MAC - Icelandic |
10081 | MAC - Turkish |
10082 | MAC - Croatia |
12000 | Unicode UCS-4 Little-Endian |
12001 | Unicode UCS-4 Big-Endian |
20000 | CNS - Taiwan |
20001 | TCA - Taiwan |
20002 | Eten - Taiwan |
20003 | IBM5550 - Taiwan |
20004 | TeleText - Taiwan |
20005 | Wang - Taiwan |
20105 | IA5 IRV International Alphabet No. 5 (7-bit) |
20106 | IA5 German (7-bit) |
20107 | IA5 Swedish (7-bit) |
20108 | IA5 Norwegian (7-bit) |
20127 | US-ASCII (7-bit) |
20261 | T.61 |
20269 | ISO 6937 Non-Spacing Accent |
20273 | IBM EBCDIC - Germany |
20277 | IBM EBCDIC - Denmark/Norway |
20278 | IBM EBCDIC - Finland/Sweden |
20280 | IBM EBCDIC - Italy |
20284 | IBM EBCDIC - Latin America/Spain |
20285 | IBM EBCDIC - United Kingdom |
20290 | IBM EBCDIC - Japanese Katakana Extended |
20297 | IBM EBCDIC - France |
20420 | IBM EBCDIC - Arabic |
20423 | IBM EBCDIC - Greek |
20424 | IBM EBCDIC - Hebrew |
20833 | IBM EBCDIC - Korean Extended |
20838 | IBM EBCDIC - Thai |
20866 | Russian - KOI8-R |
20871 | IBM EBCDIC - Icelandic |
20880 | IBM EBCDIC - Cyrillic (Russian) |
20905 | IBM EBCDIC - Turkish |
20924 | IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) |
20932 | JIS X 0208-1990 & 0121-1990 |
20936 | Simplified Chinese (GB2312) |
21025 | IBM EBCDIC - Cyrillic (Serbian, Bulgarian) |
21027 | Extended Alpha Lowercase |
21866 | Ukrainian (KOI8-U) |
28591 | ISO 8859-1 Latin I |
28592 | ISO 8859-2 Central Europe |
28593 | ISO 8859-3 Latin 3 |
28594 | ISO 8859-4 Baltic |
28595 | ISO 8859-5 Cyrillic |
28596 | ISO 8859-6 Arabic |
28597 | ISO 8859-7 Greek |
28598 | ISO 8859-8 Hebrew |
28599 | ISO 8859-9 Latin 5 |
28605 | ISO 8859-15 Latin 9 |
29001 | Europa 3 |
38598 | ISO 8859-8 Hebrew |
50220 | ISO 2022 Japanese with no halfwidth Katakana |
50221 | ISO 2022 Japanese with halfwidth Katakana |
50222 | ISO 2022 Japanese JIS X 0201-1989 |
50225 | ISO 2022 Korean |
50227 | ISO 2022 Simplified Chinese |
50229 | ISO 2022 Traditional Chinese |
50930 | Japanese (Katakana) Extended |
50931 | US/Canada and Japanese |
50933 | Korean Extended and Korean |
50935 | Simplified Chinese Extended and Simplified Chinese |
50936 | Simplified Chinese |
50937 | US/Canada and Traditional Chinese |
50939 | Japanese (Latin) Extended and Japanese |
51932 | EUC - Japanese |
51936 | EUC - Simplified Chinese |
51949 | EUC - Korean |
51950 | EUC - Traditional Chinese |
52936 | HZ-GB2312 Simplified Chinese |
54936 | Windows XP: GB18030 Simplified Chinese (4 Byte) |
57002 | ISCII Devanagari |
57003 | ISCII Bengali |
57004 | ISCII Tamil |
57005 | ISCII Telugu |
57006 | ISCII Assamese |
57007 | ISCII Oriya |
57008 | ISCII Kannada |
57009 | ISCII Malayalam |
57010 | ISCII Gujarati |
57011 | ISCII Punjabi |
65000 | Unicode UTF-7 |
65001 | Unicode UTF-8 |
Identifier | Name |
1 | ASCII |
2 | NEXTSTEP |
3 | JapaneseEUC |
4 | UTF8 |
5 | ISOLatin1 |
6 | Symbol |
7 | NonLossyASCII |
8 | ShiftJIS |
9 | ISOLatin2 |
10 | Unicode |
11 | WindowsCP1251 |
12 | WindowsCP1252 |
13 | WindowsCP1253 |
14 | WindowsCP1254 |
15 | WindowsCP1250 |
21 | ISO2022JP |
30 | MacOSRoman |
10 | UTF16String |
0x90000100 | UTF16BigEndian |
0x94000100 | UTF16LittleEndian |
0x8c000100 | UTF32String |
0x98000100 | UTF32BigEndian |
0x9c000100 | UTF32LittleEndian |
65536 | Proprietary |
- Product: The product the license is for.
- Product Key: The key the license was generated from.
- License Source: Where the license was found (e.g., RuntimeLicense, License File).
- License Type: The type of license installed (e.g., Royalty Free, Single Server).
- Last Valid Build: The last valid build number for which the license will work.
This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.
Setting this configuration setting to tells the class to use the internal implementation instead of using the system security libraries.
This setting is set to by default on all platforms.
Trappable Errors (SAML Module)
SAML Errors
603 Cannot obtain assertion. LocalSTS must be set. |
HTTP Errors
118 Firewall Error. Error description contains detailed message. | |
143 Busy executing current method. | |
151 HTTP protocol error. The error message has the server response. | |
152 No server specified in URL | |
153 Specified URLScheme is invalid. | |
155 Range operation is not supported by server. | |
156 Invalid cookie index (out of range). | |
301 Interrupted. | |
302 Can't open AttachedFile. |
TCPClient Errors
100 You cannot change the RemotePort at this time. A connection is in progress. | |
101 You cannot change the RemoteHost (Server) at this time. A connection is in progress. | |
102 The RemoteHost address is invalid (0.0.0.0). | |
104 Already connected. If you want to reconnect, close the current connection first. | |
106 You cannot change the LocalPort at this time. A connection is in progress. | |
107 You cannot change the LocalHost at this time. A connection is in progress. | |
112 You cannot change MaxLineLength at this time. A connection is in progress. | |
116 RemotePort cannot be zero. Please specify a valid service port number. | |
117 You cannot change the UseConnection option while the class is active. | |
135 Operation would block. | |
201 Timeout. | |
211 Action impossible in control's present state. | |
212 Action impossible while not connected. | |
213 Action impossible while listening. | |
301 Timeout. | |
302 Could not open file. | |
434 Unable to convert string to selected CodePage. | |
1105 Already connecting. If you want to reconnect, close the current connection first. | |
1117 You need to connect first. | |
1119 You cannot change the LocalHost at this time. A connection is in progress. | |
1120 Connection dropped by remote host. |
TCP/IP Errors
10004 [10004] Interrupted system call. | |
10009 [10009] Bad file number. | |
10013 [10013] Access denied. | |
10014 [10014] Bad address. | |
10022 [10022] Invalid argument. | |
10024 [10024] Too many open files. | |
10035 [10035] Operation would block. | |
10036 [10036] Operation now in progress. | |
10037 [10037] Operation already in progress. | |
10038 [10038] Socket operation on non-socket. | |
10039 [10039] Destination address required. | |
10040 [10040] Message too long. | |
10041 [10041] Protocol wrong type for socket. | |
10042 [10042] Bad protocol option. | |
10043 [10043] Protocol not supported. | |
10044 [10044] Socket type not supported. | |
10045 [10045] Operation not supported on socket. | |
10046 [10046] Protocol family not supported. | |
10047 [10047] Address family not supported by protocol family. | |
10048 [10048] Address already in use. | |
10049 [10049] Can't assign requested address. | |
10050 [10050] Network is down. | |
10051 [10051] Network is unreachable. | |
10052 [10052] Net dropped connection or reset. | |
10053 [10053] Software caused connection abort. | |
10054 [10054] Connection reset by peer. | |
10055 [10055] No buffer space available. | |
10056 [10056] Socket is already connected. | |
10057 [10057] Socket is not connected. | |
10058 [10058] Can't send after socket shutdown. | |
10059 [10059] Too many references, can't splice. | |
10060 [10060] Connection timed out. | |
10061 [10061] Connection refused. | |
10062 [10062] Too many levels of symbolic links. | |
10063 [10063] File name too long. | |
10064 [10064] Host is down. | |
10065 [10065] No route to host. | |
10066 [10066] Directory not empty | |
10067 [10067] Too many processes. | |
10068 [10068] Too many users. | |
10069 [10069] Disc Quota Exceeded. | |
10070 [10070] Stale NFS file handle. | |
10071 [10071] Too many levels of remote in path. | |
10091 [10091] Network subsystem is unavailable. | |
10092 [10092] WINSOCK DLL Version out of range. | |
10093 [10093] Winsock not loaded yet. | |
11001 [11001] Host not found. | |
11002 [11002] Non-authoritative 'Host not found' (try again or check DNS setup). | |
11003 [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP. | |
11004 [11004] Valid name, no data record (check DNS setup). |