NTLM Component

Properties Methods Events Config Settings Errors

The NTLM component provides a simple API to create the required tokens for NTLM authentication.

Syntax

nsoftware.IPWorksAuth.NTLM

Remarks

This component provides a simple API to create the required tokens for NTLM authentication.

The NTLM authentication process is a challenge-response scheme which consists of three messages. These three messages are the negotiation, challenge, and authentication. This component implements only the client side of NTLM and will create the negotiation and authentication tokens. The component does not transmit any data, it simply prepares the tokens for use in other transport protocols such as HTTP. The following steps describe how the component is used.

Create the Negotiate Token

To begin first set User and Password. The user value may contain domain information in the format "DOMAIN\User" or "user@domain". Next call CreateNegotiateToken to populate NegotiateToken. This token may then be transmitted separately. For instance in HTTP this would be sent in a request within the Authorization header: HTTPHeader = "Authorization: NTLM " + NegotiateToken

Create the Auth Token

After sending the negotiate token over the chosen transport protocol, the server will respond with a challenge token. Set ChallengeToken to the token received from the server. For instance, in HTTP the server will respond with the challenge token in the WWW-Authenticate header:

WWW-Authenticate: NTLM <ChallengeToken>

After setting User, Password, and ChallengeToken call CreateAuthToken. This will populate AuthToken with the created token. This token may then be transmitted separately. For instance in HTTP this would be sent in the request within the Authorization header: HTTPHeader = "Authorization: NTLM " + AuthToken

Note: If the server requires EPA (Extended Protection for Authentication), then SSLServerCert must be set to the server's public certificate before calling CreateAuthToken.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.


AuthToken	The authentication token.
ChallengeToken	The challenge token.
NegotiateToken	The negotiate token.
NTLMVersion	The NTLM version.
Password	The user's password.
SSLServerCert	The server's public certificate.
User	The user.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.


Config	Sets or retrieves a configuration setting.
CreateAuthToken	Creates the authentication token.
CreateNegotiateToken	Creates the negotiate token.
Reset	Resets the component

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.


Error	Fired when information is available about errors during data delivery.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.


DecodeToken	Whether to Base64 encode the token.
EncodeToken	Whether to Base64 encode the token.
UsePlatformNTLMAPI	Whether to use the platform NTLM API.
Workstation	The workstation name.
BuildInfo	Information about the product's build.
GUIAvailable	Whether or not a message loop is available for processing events.
LicenseInfo	Information about the current license.
MaskSensitiveData	Whether sensitive data is masked in log messages.
UseFIPSCompliantAPI	Tells the component whether or not to use FIPS certified APIs.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

AuthToken Property (NTLM Component)

The authentication token.

public string AuthToken { get; }
public byte[] AuthTokenB { get; }

Public ReadOnly Property AuthToken As String
Public ReadOnly Property AuthTokenB As Byte()

Default Value

Remarks

This property holds the created authentication token. This property is populated after calling CreateAuthToken.

Note: By default this value is Base64 encoded. Set EncodeToken to False before calling CreateAuthToken to obtain the raw value.

This property is read-only.

ChallengeToken Property (NTLM Component)

The challenge token.

Syntax

C#
VB.NET

public string ChallengeToken { get; set; }
public byte[] ChallengeTokenB { get; set; }

Public Property ChallengeToken As String
Public Property ChallengeTokenB As Byte()

Default Value

Remarks

This property specifies the challenge token. This must be set to the challenge token received from the server before calling CreateAuthToken.

Note: By default the component expects the token to be Base64 encoded. To provide a raw value to this property first set DecodeToken to False.

NegotiateToken Property (NTLM Component)

The negotiate token.

Syntax

C#
VB.NET

public string NegotiateToken { get; }
public byte[] NegotiateTokenB { get; }

Public ReadOnly Property NegotiateToken As String
Public ReadOnly Property NegotiateTokenB As Byte()

Default Value

Remarks

This property is populated after calling CreateNegotiateToken. By default the value is Base64 encoded. To obtain the raw value set EncodeToken to False before calling CreateNegotiateToken.

This property is read-only.

NTLMVersion Property (NTLM Component)

The NTLM version.

Syntax

C#
VB.NET

public NTLMNTLMVersions NTLMVersion { get; set; }

enum NTLMNTLMVersions {
  ntNTLMv1,
  ntNTLMv2
}

Public Property NTLMVersion As NtlmNTLMVersions

Enum NTLMNTLMVersions
  ntNTLMv1
  ntNTLMv2
End Enum

Default Value

Remarks

This property specifies the NTLM version to use. Possible values are:

1 (ntNTLMv1 - default)
2 (ntNTLMv2)

Note: If the server requires EPA (Extended Protection for Authentication) this property must be set to 2 (ntNTLMv2).

Password Property (NTLM Component)

The user's password.

Syntax

C#
VB.NET

public string Password { get; set; }

Public Property Password As String

Default Value

Remarks

This property specifies the user's password.

SSLServerCert Property (NTLM Component)

The server's public certificate.

Syntax

C#
VB.NET

public Certificate SSLServerCert { get; set; }

Public Property SSLServerCert As Certificate

Remarks

This property specifies the server's public certificate. This must be set if the server requires EPA (Extended Protection for Authentication).

Please refer to the Certificate type for a complete list of fields.

User Property (NTLM Component)

The user.

Syntax

C#
VB.NET

public string User { get; set; }

Public Property User As String

Default Value

Remarks

This property specifies the name and realm/domain of the user. The value specified must be in one of the following formats:

user
domain/user

Config Method (NTLM Component)

Sets or retrieves a configuration setting.

Syntax

C#
VB.NET

public string Config(string configurationString);

Async Version
public async Task<string> Config(string configurationString);
public async Task<string> Config(string configurationString, CancellationToken cancellationToken);

Public Function Config(ByVal ConfigurationString As String) As String

Async Version
Public Function Config(ByVal ConfigurationString As String) As Task(Of String)
Public Function Config(ByVal ConfigurationString As String, cancellationToken As CancellationToken) As Task(Of String)

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateAuthToken Method (NTLM Component)

Creates the authentication token.

Syntax

C#
VB.NET

public void CreateAuthToken();

Async Version
public async Task CreateAuthToken();
public async Task CreateAuthToken(CancellationToken cancellationToken);

Public Sub CreateAuthToken()

Async Version
Public Sub CreateAuthToken() As Task
Public Sub CreateAuthToken(cancellationToken As CancellationToken) As Task

Remarks

This method creates the authentication token. After calling this method the AuthToken property will be populated. The following properties are applicable when calling this method:

User (required)
Password (required)
ChallengeToken (required)
SSLServerCert
NTLMVersion

Note: SSLServerCert must be set to the server's public certificate if the server requires EPA (Extended Protection for Authentication).

CreateNegotiateToken Method (NTLM Component)

Creates the negotiate token.

Syntax

C#
VB.NET

public void CreateNegotiateToken();

Async Version
public async Task CreateNegotiateToken();
public async Task CreateNegotiateToken(CancellationToken cancellationToken);

Public Sub CreateNegotiateToken()

Async Version
Public Sub CreateNegotiateToken() As Task
Public Sub CreateNegotiateToken(cancellationToken As CancellationToken) As Task

Remarks

This method creates the negotiate token. After calling this method the NegotiateToken property is populated. The following properties are applicable when calling this method:

User (required)
Password (required)
NTLMVersion

Reset Method (NTLM Component)

Resets the component

Syntax

C#
VB.NET

public void Reset();

Async Version
public async Task Reset();
public async Task Reset(CancellationToken cancellationToken);

Public Sub Reset()

Async Version
Public Sub Reset() As Task
Public Sub Reset(cancellationToken As CancellationToken) As Task

Remarks

When called, the component will reset all of its properties to their default values.

Error Event (NTLM Component)

Fired when information is available about errors during data delivery.

Syntax

C#
VB.NET

public event OnErrorHandler OnError;

public delegate void OnErrorHandler(object sender, NTLMErrorEventArgs e);

public class NTLMErrorEventArgs : EventArgs {
  public int ErrorCode { get; }
  public string Description { get; }
}

Public Event OnError As OnErrorHandler

Public Delegate Sub OnErrorHandler(sender As Object, e As NTLMErrorEventArgs)

Public Class NTLMErrorEventArgs Inherits EventArgs
  Public ReadOnly Property ErrorCode As Integer
  Public ReadOnly Property Description As String
End Class

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component throws an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

The following fields are available:

Fields

EffectiveDate
string (read-only)
Default: ""

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

ExpirationDate
string (read-only)
Default: ""

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

ExtendedKeyUsage
string (read-only)
Default: ""

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

Fingerprint
string (read-only)
Default: ""

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

FingerprintSHA1
string (read-only)
Default: ""

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

FingerprintSHA256
string (read-only)
Default: ""

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

Issuer
string (read-only)
Default: ""

The issuer of the certificate. This field contains a string representation of the name of the issuing authority for the certificate.

PrivateKey
string (read-only)
Default: ""

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The PrivateKey may be available but not exportable. In this case, PrivateKey returns an empty string.

PrivateKeyAvailable
bool (read-only)
Default: False

Whether a PrivateKey is available for the selected certificate. If PrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

PrivateKeyContainer
string (read-only)
Default: ""

The name of the PrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

PublicKey
string (read-only)
Default: ""

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

PublicKeyAlgorithm
string (read-only)
Default: ""

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

PublicKeyLength
int (read-only)
Default: 0

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

SerialNumber
string (read-only)
Default: ""

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

SignatureAlgorithm
string (read-only)
Default: ""

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

Store
string
Default: "MY"

The name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password-protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StoreB
byte []
Default: "MY"

The name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password-protected, specify the password in StorePassword.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

StorePassword
string
Default: ""

If the type of certificate store requires a password, this field is used to specify the password needed to open the certificate store.

StoreType
CertStoreTypes
Default: 0

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This field can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: This store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

SubjectAltNames
string (read-only)
Default: ""

Comma-separated lists of alternative subject names for the certificate.

ThumbprintMD5
string (read-only)
Default: ""

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA1
string (read-only)
Default: ""

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA256
string (read-only)
Default: ""

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

Usage
string (read-only)
Default: ""

The text description of UsageFlags.

This value will be one or more of the following strings and will be separated by commas:

Digital Signature
Non-Repudiation
Key Encipherment
Data Encipherment
Key Agreement
Certificate Signing
CRL Signing
Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

UsageFlags
int (read-only)
Default: 0

The flags that show intended use for the certificate. The value of UsageFlags is a combination of the following flags:


0x80	Digital Signature
0x40	Non-Repudiation
0x20	Key Encipherment
0x10	Data Encipherment
0x08	Key Agreement
0x04	Certificate Signing
0x02	CRL Signing
0x01	Encipher Only

Please see the Usage field for a text representation of UsageFlags.

This functionality currently is not available when the provider is OpenSSL.

Version
string (read-only)
Default: ""

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

Subject
string
Default: ""

The subject of the certificate used for client authentication.

This field will be populated with the full subject of the loaded certificate. When loading a certificate, the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

Encoded
string
Default: ""

The certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

EncodedB
byte []
Default: ""

The certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

Constructors

C#
VB.NET

public Certificate();

Public Certificate()

Creates a instance whose properties can be set. This is useful for use with when generating new certificates.

C#
VB.NET

public Certificate(string certificateFile);

Public Certificate(ByVal CertificateFile As String)

Opens CertificateFile and reads out the contents as an X.509 public key.

C#
VB.NET

public Certificate(byte[] encoded);

Public Certificate(ByVal Encoded As Byte())

Parses Encoded as an X.509 public key.

C#
VB.NET

public Certificate(CertStoreTypes storeType, string store, string storePassword, string subject);

Public Certificate(ByVal StoreType As CertStoreTypes, ByVal Store As String, ByVal StorePassword As String, ByVal Subject As String)

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

After the store has been successfully opened, the component will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

C#
VB.NET

public Certificate(CertStoreTypes storeType, string store, string storePassword, string subject, string configurationString);

Public Certificate(ByVal StoreType As CertStoreTypes, ByVal Store As String, ByVal StorePassword As String, ByVal Subject As String, ByVal ConfigurationString As String)

ConfigurationString is a newline-separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CryptoAPI option. The default value is True (the key is persisted). "Thumbprint" - an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to the cstUser , cstMachine , cstPublicKeyFile , and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations.

C#
VB.NET

public Certificate(CertStoreTypes storeType, string store, string storePassword, byte[] encoded);

Public Certificate(ByVal StoreType As CertStoreTypes, ByVal Store As String, ByVal StorePassword As String, ByVal Encoded As Byte())

After the store has been successfully opened, the component will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

C#
VB.NET

public Certificate(CertStoreTypes storeType, byte[] store, string storePassword, string subject);

Public Certificate(ByVal StoreType As CertStoreTypes, ByVal Store As Byte(), ByVal StorePassword As String, ByVal Subject As String)

StoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a byte array containing the certificate data. StorePassword is the password used to protect the store.

C#
VB.NET

public Certificate(CertStoreTypes storeType, byte[] store, string storePassword, string subject, string configurationString);

Public Certificate(ByVal StoreType As CertStoreTypes, ByVal Store As Byte(), ByVal StorePassword As String, ByVal Subject As String, ByVal ConfigurationString As String)

C#
VB.NET

public Certificate(CertStoreTypes storeType, byte[] store, string storePassword, byte[] encoded);

Public Certificate(ByVal StoreType As CertStoreTypes, ByVal Store As Byte(), ByVal StorePassword As String, ByVal Encoded As Byte())

After the store has been successfully opened, the component will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

Config Settings (NTLM Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

NTLM Config Settings

DecodeToken: Whether to Base64 encode the token.

This setting specifies whether to Base64 decode the ChallengeToken. The default value is True.

EncodeToken: Whether to Base64 encode the token.

This setting specifies whether AuthToken and rpChallengeToken are Base64 encoded after calling CreateAuthToken and rmCreateNegotiateToken;. The default value is True.

UsePlatformNTLMAPI: Whether to use the platform NTLM API.

This setting specifies whether to use the platform NTLM API. The default value is False.

Workstation: The workstation name.

This setting optionally specifies the workstation name of the client. By default this value is empty and the component will automatically determine the correct value.

Note: This setting is not applicable when UsePlatformNTLMAPI is True. The platform NTLM API will always use the current workstation's name.

Base Config Settings

BuildInfo: Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

GUIAvailable: Whether or not a message loop is available for processing events.

In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The component will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.

In some non-GUI applications, an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GUIAvailable to false will ensure that the component does not attempt to process external events.

LicenseInfo: Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

Product: The product the license is for.
Product Key: The key the license was generated from.
License Source: Where the license was found (e.g., RuntimeLicense, License File).
License Type: The type of license installed (e.g., Royalty Free, Single Server).
Last Valid Build: The last valid build number for which the license will work.

MaskSensitiveData: Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseFIPSCompliantAPI: Tells the component whether or not to use FIPS certified APIs.

When set to true, the component will utilize the underlying operating system's certified APIs. Java editions, regardless of OS, utilize Bouncy Castle Federal Information Processing Standards (FIPS), while all other Windows editions make use of Microsoft security libraries.

FIPS mode can be enabled by setting the UseFIPSCompliantAPI configuration setting to true. This is a static setting that applies to all instances of all components of the toolkit within the process. It is recommended to enable or disable this setting once before the component has been used to establish a connection. Enabling FIPS while an instance of the component is active and connected may result in unexpected behavior.

For more details, please see the FIPS 140-2 Compliance article.

Note: This setting is applicable only on Windows.

Note: Enabling FIPS compliance requires a special license; please contact sales@nsoftware.com for details.

UseInternalSecurityAPI: Whether or not to use the system security libraries or an internal implementation.

When set to false, the component will use the system security libraries by default to perform cryptographic functions where applicable. In this case, calls to unmanaged code will be made. In certain environments, this is not desirable. To use a completely managed security implementation, set this setting to true.

Setting this configuration setting to true tells the component to use the internal implementation instead of using the system security libraries.

On Windows, this setting is set to false by default. On Linux/macOS, this setting is set to true by default.

If using the .NET Standard Library, this setting will be true on all platforms. The .NET Standard library does not support using the system security libraries.

Note: This setting is static. The value set is applicable to all components used in the application.

When this value is set, the product's system dynamic link library (DLL) is no longer required as a reference, as all unmanaged code is stored in that file.

Trappable Errors (NTLM Component)

NTLM Errors

101	Component is busy.
102	Username and password must be specified.
103	ChallengeToken must be specified.