OpenPGP Component

Properties   Methods   Events   Config Settings   Errors  

The OpenPGP component is used to encrypt/decrypt and sign/verify PGP messages.

Syntax

TipcOpenPGP

Remarks

The OpenPGP component supports encrypting/decrypting and signing/verifying OpenPGP messages in the format specified by RFC 4880.

The Encrypt, Sign, and SignAndEncrypt methods are used to create a message to be sent to your partner. You can additionally create messages bound for multiple recipients with different keys, simultaneously encrypt and compress with the most popular compression algorithms, and control other aspects such as the encrypting algorithm to use.

When a message is received, the Decrypt, VerifySignature, and DecryptAndVerifySignature methods are used to process the incoming message.

The Key* properties specify the key (with private key) used to sign and decrypt.

The SignerKey* properties specify the key used to verify a signature.

The RecipientKey* properties specify the key used to encrypt.

Input and Output Properties

The component will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

When a valid source is found the search stops. The order in which the output properties are checked is as follows:

Property List


The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

ASCIIArmorSpecifies whether to use ASCII armor to encode the output message.
AutoSelectAlgorithmsWhether to automatically select algorithms when encrypting or signing.
ClearSignatureSpecifies whether or not to create a cleartext signature.
CompressionMethodThe compression algorithm used.
DetachedSignatureSpecifies whether or not to generate a detached signature when signing a message.
EncryptingAlgorithmThe encryption algorithm used when encrypting.
InputFileThe file to process.
InputMessageThe message to process.
KeyCountThe number of records in the Key arrays.
KeyEncodedThe key.
KeyKeyringThe location of the keyring.
KeyPassphraseThe passphrase for the key's secret key (if any).
KeyUserIdThe user Id of the key.
MessageHeaderCountThe number of records in the MessageHeader arrays.
MessageHeaderFieldThis property contains the name of the HTTP header (this is the same case as it is delivered).
MessageHeaderValueThis property contains the header contents.
OutputFileThe output file.
OutputMessageThe output message after processing.
OverwriteIndicates whether or not the component should overwrite files.
RecipientKeyCountThe number of records in the RecipientKey arrays.
RecipientKeyEncodedThe key.
RecipientKeyKeyringThe location of the keyring.
RecipientKeyUserIdThe user Id of the key.
SignerKeyCountThe number of records in the SignerKey arrays.
SignerKeyEncodedThe key.
SignerKeyKeyringThe location of the keyring.
SignerKeyUserIdThe user Id of the key.
SigningAlgorithmThe signature hash algorithm used when signing.

Method List


The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting.
DecryptDecrypts the message.
DecryptAndVerifySignatureDecrypts and verifies the signature of the message.
EncryptEncrypts the message.
GetRecipientInfoGets recipient information for an encrypted message.
ResetResets the component properties.
SignSigns the message.
SignAndEncryptSigns and encrypts the current message.
VerifySignatureVerifies the signature of the current message.

Event List


The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

ErrorInformation about errors during data delivery.
KeyPassphraseFired if the passphrase of current key is incorrect or empty.
ProgressFired as progress is made.
RecipientInfoFired for each recipient key of the encrypted message.
SignatureInfoFired during verification of the signed message.
StatusShows the progress of the operation.
VerificationStatusFired after verification of the signed message.

Config Settings


The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AllowEmptyInputWhether to allow empty files for input.
AllowOldPacketTypeWhether to allow the older encrypted packet type.
CloseInputStreamAfterProcessingDetermines whether or not the input stream is closed after processing.
CloseOutputStreamAfterProcessingDetermines whether or not the output stream is closed after processing.
CompressionLevelThe level of compression used.
DeleteOutputFileOnErrorWhether to delete the output file on an error.
DetachedSignatureDataThe detached signature.
EnsureValidDSASignatureHashAlgorithmWhether or not to select a suitable signature hash algorithm automatically.
FileNameThe original name of the encrypted file.
KeyIdLengthThe length of the KeyId available.
KeySelectionMethodThe method used to select a key for encryption or signing.
LogLevelSpecifies the level of detail that is logged.
PGPZipDirThe directory used when creating or extracting a PGP zip file.
ProgressEventThresholdThe amount of data in bytes to process before firing the progress event.
PublicKeyringFileThe file name of the public keyring file.
ReadFromProgressEventWhether to read input data from inside the progress event.
RecursiveDecryptModeWhether the encrypted data should be decrypted recursively.
RequireEncryptionWhether to throw an error when decrypting and encryption is not detected.
RequireIntegrityProtectedPacketWhether an MDC packet is required for decryption.
RequireSignatureWhether to throw an error when verifying a signature and no signature is found.
RequireValidSignatureSpecifies if an invalid signature is considered an error condition.
SecretKeyringFileThe file name of the secret keyring file.
SplitHeadersControls whether ASCII Armor headers are split or not.
SymmetricPassphraseThe password used for symmetric encryption or decryption.
UseFipsCompliantAlgorithmsRestricts the usage to FIPS compliant algorithms only.
VersionHeaderThe Version header value in the ASCII armored OpenPGP message.
WriteToProgressEventWhether to write output data so it is accessible from inside the progress event.
BuildInfoInformation about the product's build.
CodePageThe system code page used for Unicode to Multibyte translations.
LicenseInfoInformation about the current license.
MaskSensitiveWhether sensitive data is masked in log messages.
UseInternalSecurityAPITells the component whether or not to use the system security libraries or an internal implementation.

ASCIIArmor Property (OpenPGP Component)

Specifies whether to use ASCII armor to encode the output message.

Syntax

__property bool ASCIIArmor = { read=FASCIIArmor, write=FSetASCIIArmor };

Default Value

false

Remarks

This property controls whether or not ASCII armoring is used on the output message. The default value is False.

Data Type

Boolean

AutoSelectAlgorithms Property (OpenPGP Component)

Whether to automatically select algorithms when encrypting or signing.

Syntax

__property int AutoSelectAlgorithms = { read=FAutoSelectAlgorithms, write=FSetAutoSelectAlgorithms };

Default Value

0

Remarks

This property is set to the binary 'OR' of one or more options indicating which algorithms to automatically select.

When enabled automatic selection is performed by examining the perferred algorithms specified by the key.

When Encrypt is called the component will read the preferred encryption algorithm and compression method from the key specified in the RecipientKey* properties.

If multiple keys are specified the preferred encryption algorithm and compression method from the last key is used. The EncryptingAlgorithm and CompressionMethod properties are ignored.

When Sign is called the component will read the preferred MAC algorithm and compression method from the private key specified in the Key* properties. If multiple keys are specified the preferred MAC algorithm and compression method from the last key is used. The SigningAlgorithm and CompressionMethod properties are ignored.

The list below defines available options.

Compression Algorithm 1 (Hex 0x01)
Cipher Algorithm 2 (Hex 0x02)
MAC Algorithm 4 (Hex 0x04)

The default value is 0 which means algorithms are not automatically selected.

Data Type

Integer

ClearSignature Property (OpenPGP Component)

Specifies whether or not to create a cleartext signature.

Syntax

__property bool ClearSignature = { read=FClearSignature, write=FSetClearSignature };

Default Value

false

Remarks

This property controls whether or not a cleartext signature is created during signing. The default value is False. When set to true a clear text signature will be created when Sign is called.

Data Type

Boolean

CompressionMethod Property (OpenPGP Component)

The compression algorithm used.

Syntax

__property String CompressionMethod = { read=FCompressionMethod, write=FSetCompressionMethod };

Default Value

"zip"

Remarks

This property specifies which compression method is used when generating output. Possible values are:

  • zip (default)
  • zlib
  • bzip2
  • none or uncompressed
Note: The level of compression is controlled by the CompressionLevel setting.

Data Type

String

DetachedSignature Property (OpenPGP Component)

Specifies whether or not to generate a detached signature when signing a message.

Syntax

__property bool DetachedSignature = { read=FDetachedSignature, write=FSetDetachedSignature };

Default Value

false

Remarks

This property specifies whether or not a detached signature is created when signing a message. The default value is False.

If set to true the output will only be the signature. The data being signed will not be included in the output. If set to true ClearSignature will be ignored.

When this property is false (default) the signature is not detached. The output will contain both the signed data and the signature.

Data Type

Boolean

EncryptingAlgorithm Property (OpenPGP Component)

The encryption algorithm used when encrypting.

Syntax

__property String EncryptingAlgorithm = { read=FEncryptingAlgorithm, write=FSetEncryptingAlgorithm };

Default Value

"AES128"

Remarks

This property specifies the encryption algorithm used when encrypting. Possible values are:

  • CAST5
  • 3DES or TripleDES
  • AES256
  • AES192
  • AES128 (default)
  • BLOWFISH
  • TWOFISH
  • IDEA

Data Type

String

InputFile Property (OpenPGP Component)

The file to process.

Syntax

__property String InputFile = { read=FInputFile, write=FSetInputFile };

Default Value

""

Remarks

This property specifies the file to be processed. Set this property to the full or relative path to the file which will be processed.

Input and Output Properties

The component will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

When a valid source is found the search stops. The order in which the output properties are checked is as follows:

Data Type

String

InputMessage Property (OpenPGP Component)

The message to process.

Syntax

__property String InputMessage = { read=FInputMessage, write=FSetInputMessage };
__property DynamicArray<Byte> InputMessageB = { read=FInputMessageB, write=FSetInputMessageB };

Default Value

""

Remarks

This property specifies the message to be processed. Set this property to the OpenPGP message content.

Input and Output Properties

The component will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

When a valid source is found the search stops. The order in which the output properties are checked is as follows:

Data Type

Byte Array

KeyCount Property (OpenPGP Component)

The number of records in the Key arrays.

Syntax

__property int KeyCount = { read=FKeyCount, write=FSetKeyCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KeyCount - 1.

This property is not available at design time.

Data Type

Integer

KeyEncoded Property (OpenPGP Component)

The key.

Syntax

__property String KeyEncoded[int KeyIndex] = { read=FKeyEncoded, write=FSetKeyEncoded };
__property DynamicArray<Byte> KeyEncodedB[int KeyIndex] = { read=FKeyEncodedB, write=FSetKeyEncodedB };

Default Value

""

Remarks

The key. This property is used to assign a specific key. The KeyUserId properties may also be used to specify a key.

The KeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyCount property.

This property is not available at design time.

Data Type

Byte Array

KeyKeyring Property (OpenPGP Component)

The location of the keyring.

Syntax

__property String KeyKeyring[int KeyIndex] = { read=FKeyKeyring, write=FSetKeyKeyring };

Default Value

""

Remarks

The location of the keyring.

If the keyring is stored in a directory, set this property to the directory. The directory must contain the files "secring.gpg" and "pubring.gpg". A keyring may also be stored in a single file. If the keyring is a file this property should be set to the path of the file.

When This property is set the component will read the keyring and populate the Key* properties with the first key found in the keyring. Set KeyUserId to select a different key in the current keyring.

The KeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyCount property.

This property is not available at design time.

Data Type

String

KeyPassphrase Property (OpenPGP Component)

The passphrase for the key's secret key (if any).

Syntax

__property String KeyPassphrase[int KeyIndex] = { read=FKeyPassphrase, write=FSetKeyPassphrase };

Default Value

""

Remarks

The passphrase for the key's secret key (if any). This must be specified before operations requiring the secret key are attempted. The passphrase may be supplied in this property or through the KeyPassphrase event, which will fire when a passphrase is required.

The passphrase is required when using the following methods in KeyMgr:

  • AddUserId
  • SignUserId
  • ChangeExpirationDate
  • ChangePassphrase

When using the OpenPGP component, or an email-based component, the following methods require a passphrase for the key:

  • Decrypt
  • Sign
  • SignAndEncrypt

The KeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyCount property.

This property is not available at design time.

Data Type

String

KeyUserId Property (OpenPGP Component)

The user Id of the key.

Syntax

__property String KeyUserId[int KeyIndex] = { read=FKeyUserId, write=FSetKeyUserId };

Default Value

""

Remarks

The user Id of the key. When a key is loaded this property is populated with the user Id associated with the key. This property may be set to load a key from the Keyring. When this property is set the component will search the Keyring for a key associated with the UserId specified.

When loading a key with multiple user Ids, this property will be populated with the UserId that was most recently added to the key. To discover all of the UserIds associated with a key query this property and KeyOtherUserIds after loading the key.

The UserId format is:

FirstName LastName (Comment) <Email>
Not all values are required when selecting or generating a key, but at least FirstName or Email are required.

When using this property to select a key you may also specify the key's Id, or any of its subkeys' Ids, instead of a user Id. The component will then search for a key with a matching Id. This is helpful in situations where you do not have the UserId but still need to load the key, such as within the OpenPGP component's RecipientInfo event.

The KeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyCount property.

This property is not available at design time.

Data Type

String

MessageHeaderCount Property (OpenPGP Component)

The number of records in the MessageHeader arrays.

Syntax

__property int MessageHeaderCount = { read=FMessageHeaderCount, write=FSetMessageHeaderCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at MessageHeaderCount - 1.

This property is not available at design time.

Data Type

Integer

MessageHeaderField Property (OpenPGP Component)

This property contains the name of the HTTP header (this is the same case as it is delivered).

Syntax

__property String MessageHeaderField[int MessageHeaderIndex] = { read=FMessageHeaderField, write=FSetMessageHeaderField };

Default Value

""

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The MessageHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageHeaderCount property.

This property is not available at design time.

Data Type

String

MessageHeaderValue Property (OpenPGP Component)

This property contains the header contents.

Syntax

__property String MessageHeaderValue[int MessageHeaderIndex] = { read=FMessageHeaderValue, write=FSetMessageHeaderValue };

Default Value

""

Remarks

This property contains the Header contents.

The MessageHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageHeaderCount property.

This property is not available at design time.

Data Type

String

OutputFile Property (OpenPGP Component)

The output file.

Syntax

__property String OutputFile = { read=FOutputFile, write=FSetOutputFile };

Default Value

""

Remarks

This property specifies the file to which the output will be written. This may be set to an absolute or relative path.

Input and Output Properties

The component will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

When a valid source is found the search stops. The order in which the output properties are checked is as follows:

  • OutputFile
  • OutputMessage: The output data is written to this property if no other destination is specified.

Data Type

String

OutputMessage Property (OpenPGP Component)

The output message after processing.

Syntax

__property String OutputMessage = { read=FOutputMessage, write=FSetOutputMessage };
__property DynamicArray<Byte> OutputMessageB = { read=FOutputMessageB, write=FSetOutputMessageB };

Default Value

""

Remarks

This property will be populated with the output from the operation if OutputFile is not set.

Input and Output Properties

The component will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

When a valid source is found the search stops. The order in which the output properties are checked is as follows:

  • OutputFile
  • OutputMessage: The output data is written to this property if no other destination is specified.

Data Type

Byte Array

Overwrite Property (OpenPGP Component)

Indicates whether or not the component should overwrite files.

Syntax

__property bool Overwrite = { read=FOverwrite, write=FSetOverwrite };

Default Value

false

Remarks

This property indicates whether or not the component will overwrite OutputFile. If Overwrite is False, an error will be thrown whenever OutputFile exists before an operation. The default value is False.

Data Type

Boolean

RecipientKeyCount Property (OpenPGP Component)

The number of records in the RecipientKey arrays.

Syntax

__property int RecipientKeyCount = { read=FRecipientKeyCount, write=FSetRecipientKeyCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at RecipientKeyCount - 1.

This property is not available at design time.

Data Type

Integer

RecipientKeyEncoded Property (OpenPGP Component)

The key.

Syntax

__property String RecipientKeyEncoded[int RecipientKeyIndex] = { read=FRecipientKeyEncoded, write=FSetRecipientKeyEncoded };
__property DynamicArray<Byte> RecipientKeyEncodedB[int RecipientKeyIndex] = { read=FRecipientKeyEncodedB, write=FSetRecipientKeyEncodedB };

Default Value

""

Remarks

The key. This property is used to assign a specific key. The RecipientKeyUserId properties may also be used to specify a key.

The RecipientKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientKeyCount property.

This property is not available at design time.

Data Type

Byte Array

RecipientKeyKeyring Property (OpenPGP Component)

The location of the keyring.

Syntax

__property String RecipientKeyKeyring[int RecipientKeyIndex] = { read=FRecipientKeyKeyring, write=FSetRecipientKeyKeyring };

Default Value

""

Remarks

The location of the keyring.

If the keyring is stored in a directory, set this property to the directory. The directory must contain the files "secring.gpg" and "pubring.gpg". A keyring may also be stored in a single file. If the keyring is a file this property should be set to the path of the file.

When This property is set the component will read the keyring and populate the Key* properties with the first key found in the keyring. Set KeyUserId to select a different key in the current keyring.

The RecipientKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientKeyCount property.

This property is not available at design time.

Data Type

String

RecipientKeyUserId Property (OpenPGP Component)

The user Id of the key.

Syntax

__property String RecipientKeyUserId[int RecipientKeyIndex] = { read=FRecipientKeyUserId, write=FSetRecipientKeyUserId };

Default Value

""

Remarks

The user Id of the key. When a key is loaded this property is populated with the user Id associated with the key. This property may be set to load a key from the Keyring. When this property is set the component will search the Keyring for a key associated with the UserId specified.

When loading a key with multiple user Ids, this property will be populated with the UserId that was most recently added to the key. To discover all of the UserIds associated with a key query this property and KeyOtherUserIds after loading the key.

The UserId format is:

FirstName LastName (Comment) <Email>
Not all values are required when selecting or generating a key, but at least FirstName or Email are required.

When using this property to select a key you may also specify the key's Id, or any of its subkeys' Ids, instead of a user Id. The component will then search for a key with a matching Id. This is helpful in situations where you do not have the UserId but still need to load the key, such as within the OpenPGP component's RecipientInfo event.

The RecipientKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientKeyCount property.

This property is not available at design time.

Data Type

String

SignerKeyCount Property (OpenPGP Component)

The number of records in the SignerKey arrays.

Syntax

__property int SignerKeyCount = { read=FSignerKeyCount, write=FSetSignerKeyCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at SignerKeyCount - 1.

This property is not available at design time.

Data Type

Integer

SignerKeyEncoded Property (OpenPGP Component)

The key.

Syntax

__property String SignerKeyEncoded[int SignerKeyIndex] = { read=FSignerKeyEncoded, write=FSetSignerKeyEncoded };
__property DynamicArray<Byte> SignerKeyEncodedB[int SignerKeyIndex] = { read=FSignerKeyEncodedB, write=FSetSignerKeyEncodedB };

Default Value

""

Remarks

The key. This property is used to assign a specific key. The SignerKeyUserId properties may also be used to specify a key.

The SignerKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerKeyCount property.

This property is not available at design time.

Data Type

Byte Array

SignerKeyKeyring Property (OpenPGP Component)

The location of the keyring.

Syntax

__property String SignerKeyKeyring[int SignerKeyIndex] = { read=FSignerKeyKeyring, write=FSetSignerKeyKeyring };

Default Value

""

Remarks

The location of the keyring.

If the keyring is stored in a directory, set this property to the directory. The directory must contain the files "secring.gpg" and "pubring.gpg". A keyring may also be stored in a single file. If the keyring is a file this property should be set to the path of the file.

When This property is set the component will read the keyring and populate the Key* properties with the first key found in the keyring. Set KeyUserId to select a different key in the current keyring.

The SignerKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerKeyCount property.

This property is not available at design time.

Data Type

String

SignerKeyUserId Property (OpenPGP Component)

The user Id of the key.

Syntax

__property String SignerKeyUserId[int SignerKeyIndex] = { read=FSignerKeyUserId, write=FSetSignerKeyUserId };

Default Value

""

Remarks

The user Id of the key. When a key is loaded this property is populated with the user Id associated with the key. This property may be set to load a key from the Keyring. When this property is set the component will search the Keyring for a key associated with the UserId specified.

When loading a key with multiple user Ids, this property will be populated with the UserId that was most recently added to the key. To discover all of the UserIds associated with a key query this property and KeyOtherUserIds after loading the key.

The UserId format is:

FirstName LastName (Comment) <Email>
Not all values are required when selecting or generating a key, but at least FirstName or Email are required.

When using this property to select a key you may also specify the key's Id, or any of its subkeys' Ids, instead of a user Id. The component will then search for a key with a matching Id. This is helpful in situations where you do not have the UserId but still need to load the key, such as within the OpenPGP component's RecipientInfo event.

The SignerKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerKeyCount property.

This property is not available at design time.

Data Type

String

SigningAlgorithm Property (OpenPGP Component)

The signature hash algorithm used when signing.

Syntax

__property String SigningAlgorithm = { read=FSigningAlgorithm, write=FSetSigningAlgorithm };

Default Value

"SHA256"

Remarks

This property specifies the signature hash algorithm used when signing. Possible values are:

  • SHA1
  • MD5
  • SHA256 (default)
  • SHA384
  • SHA512
  • SHA224
  • RIPEMD160

Data Type

String

Config Method (OpenPGP Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Decrypt Method (OpenPGP Component)

Decrypts the message.

Syntax

void __fastcall Decrypt();

Remarks

This method decrypts the specified message.

The message will be decrypted using the keys specified in the Key* properties. Before decryption begins the component will fire the RecipientInfo event with information about the encrypted message, including the key used to encrypt the message. Within this event you may use the available information to load the correct key into Keys.

DecryptAndVerifySignature Method (OpenPGP Component)

Decrypts and verifies the signature of the message.

Syntax

void __fastcall DecryptAndVerifySignature();

Remarks

This method attempts to both decrypt and verify the signature of the message. All of the properties affected by calling the Decrypt and VerifySignature methods are affected in the same manner.

This method may be used when the data is signed, encrypted, or signed and encrypted. For instance, if the data is encrypted but not signed you may still use this method and the component will perform the decryption without error.

The message will be decrypted using the keys specified in the Key* properties. Before decryption begins the component will fire the RecipientInfo event with information about the encrypted message, including the key used to encrypt the message. Within this event you may use the available information to load the correct key into Keys.

The message will be verified using the keys specified in the SignerKey* properties. Before verification begins the component will fire the SignatureInfo event with information about the signature including the key used to sign the message. Within this event you may use the information available to load the correct key into the SignerKey* properties.

By default, if the signature is not valid the component raises an exception. The configuration setting RequireValidSignature may be set to False to disable this requirement. When RequireValidSignature is set to False, the Status parameter of the VerificationStatus event should be checked to determine the result of the operation.

NOTE: This method does not attempt to check the validity of the signing key itself.

Encrypt Method (OpenPGP Component)

Encrypts the message.

Syntax

void __fastcall Encrypt();

Remarks

This method encrypts the specified message.

The message is encrypted with the public keys specified in the RecipientKey* properties.

When encrypting, the following properties may be used to further configure the component:

GetRecipientInfo Method (OpenPGP Component)

Gets recipient information for an encrypted message.

Syntax

void __fastcall GetRecipientInfo();

Remarks

This method will fire a RecipientInfo event for every recipient key for which the message has been encrypted. The event will provide the KeyId, which can be used to identify the correct key to be used for decryption.

Reset Method (OpenPGP Component)

Resets the component properties.

Syntax

void __fastcall Reset();

Remarks

This method resets all message and key properties to their default values.

Sign Method (OpenPGP Component)

Signs the message.

Syntax

void __fastcall Sign();

Remarks

This method signs the specified message.

The message is signed with the private key specified in the Key* properties.

When signing, the following properties may be used to further configure the component:

SignAndEncrypt Method (OpenPGP Component)

Signs and encrypts the current message.

Syntax

void __fastcall SignAndEncrypt();

Remarks

This method signs and encrypts the specified message.

The message is encrypted with the public keys specified in the RecipientKey* properties and signed with the private key specified in the Key* properties .

When encrypting, the following properties may be used to further configure the component:

When signing, the following properties may be used to further configure the component:

VerifySignature Method (OpenPGP Component)

Verifies the signature of the current message.

Syntax

void __fastcall VerifySignature();

Remarks

This method verifies the signature of the message.

The message will be verified using the keys specified in the SignerKey* properties. Before verification begins the component will fire the SignatureInfo event with information about the signature including the key used to sign the message. Within this event you may use the information available to load the correct key into the SignerKey* properties.

By default, if the signature is not valid the component raises an exception. The configuration setting RequireValidSignature may be set to False to disable this requirement. When RequireValidSignature is set to False, the Status parameter of the VerificationStatus event should be checked to determine the result of the operation.

Error Event (OpenPGP Component)

Information about errors during data delivery.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TipcOpenPGPErrorEventParams;
typedef void __fastcall (__closure *TipcOpenPGPErrorEvent)(System::TObject* Sender, TipcOpenPGPErrorEventParams *e);
__property TipcOpenPGPErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

KeyPassphrase Event (OpenPGP Component)

Fired if the passphrase of current key is incorrect or empty.

Syntax

typedef struct {
  String UserId;
  String KeyId;
  String Passphrase;
} TipcOpenPGPKeyPassphraseEventParams;
typedef void __fastcall (__closure *TipcOpenPGPKeyPassphraseEvent)(System::TObject* Sender, TipcOpenPGPKeyPassphraseEventParams *e);
__property TipcOpenPGPKeyPassphraseEvent OnKeyPassphrase = { read=FOnKeyPassphrase, write=FOnKeyPassphrase };

Remarks

This event fires when the passphrase for the key is required. The passphrase must be specified before operations requiring the secret key are attempted. The passphrase may be supplied by setting the Passphrase parameter in this event, or by specifying the KeyPassphrase property before attempting the operation.

The passphrase is required when using the following methods in KeyMgr:

  • AddUserId
  • SignUserId
  • ChangeExpirationDate
  • ChangePassphrase

When using the OpenPGP component, or an email-based component, the following methods require a passphrase for the key:

Progress Event (OpenPGP Component)

Fired as progress is made.

Syntax

typedef struct {
  __int64 BytesProcessed;
  int PercentProcessed;
  int Operation;
  bool IsEOF;
} TipcOpenPGPProgressEventParams;
typedef void __fastcall (__closure *TipcOpenPGPProgressEvent)(System::TObject* Sender, TipcOpenPGPProgressEventParams *e);
__property TipcOpenPGPProgressEvent OnProgress = { read=FOnProgress, write=FOnProgress };

Remarks

This event is fired automatically as data is processed by the component.

The PercentProcessed parameter indicates the current status of the operation.

The BytesProcessed parameter holds the total number of bytes processed so far.

The Operation parameter is only applicable when either ReadFromProgressEvent or WriteToProgressEvent is set to True. This parameter defines whether a Read or Write operation is required. If the configuration settings are not set this parameter will always return 0. Possible values are:

0None
1Read
2Write

The IsEOF parameter is only applicable when either ReadFromProgressEvent or WriteToProgressEvent is set to True. This parameter defines whether the Read or Write operation is complete. When the Operation is Read (1) this parameter must be set to indicate that all data has been supplied to the component. When the Operation is Write (2) this value may be queried to determine when all data has been processed.

RecipientInfo Event (OpenPGP Component)

Fired for each recipient key of the encrypted message.

Syntax

typedef struct {
  String KeyId;
  String PublicKeyAlgorithm;
} TipcOpenPGPRecipientInfoEventParams;
typedef void __fastcall (__closure *TipcOpenPGPRecipientInfoEvent)(System::TObject* Sender, TipcOpenPGPRecipientInfoEventParams *e);
__property TipcOpenPGPRecipientInfoEvent OnRecipientInfo = { read=FOnRecipientInfo, write=FOnRecipientInfo };

Remarks

This event fires when the Decrypt or DecryptAndVerifySignature method is called.

KeyId is the Id of the key used to encrypt the message. If a subkey was used to encrypt the message this will be the Id of that subkey. It is the hex-encoded, 4- or 8-byte Id of the key. It is the same as the last 4 or 8 bytes of the fingerprint. For instance:

BF52A0AB
This can be used to identify the correct key to specify in Keys. Keys can be set from within this event as this event fires directly before the decryption process begins.

SignatureInfo Event (OpenPGP Component)

Fired during verification of the signed message.

Syntax

typedef struct {
  String KeyId;
  String SigningAlgorithm;
  String PublicKeyAlgorithm;
} TipcOpenPGPSignatureInfoEventParams;
typedef void __fastcall (__closure *TipcOpenPGPSignatureInfoEvent)(System::TObject* Sender, TipcOpenPGPSignatureInfoEventParams *e);
__property TipcOpenPGPSignatureInfoEvent OnSignatureInfo = { read=FOnSignatureInfo, write=FOnSignatureInfo };

Remarks

This event fires when the VerifySignature or DecryptAndVerifySignature method is called. It provides information about the signature of the message.

KeyId is the Id of the key used to sign the message. If a subkey was used to sign the message this will be the Id of that subkey. It is the hex-encoded, 4- or 8-byte Id of the key. It is the same as the last 4 or 8 bytes of the Fingerprint. For instance:

BF52A0AB
This can be used to identify the correct key to specify in the SignerKey* properties. This property can be set from within this event as this event fires directly before the verification process begins.

SigningAlgorithm describes the hash algorithm used when the message was originally signed. This value is applicable only to the message signature, not the key used to sign the message. Possible values are:

  • SHA1
  • SHA256
  • SHA384
  • SHA512
  • SHA224
  • MD5

PublicKeyAlgorithm is the algorithm of the public key used to sign the message. Possible values are:

  • RSA
  • DSA
  • ECDSA
  • EdDSA

Status Event (OpenPGP Component)

Shows the progress of the operation.

Syntax

typedef struct {
  String Message;
} TipcOpenPGPStatusEventParams;
typedef void __fastcall (__closure *TipcOpenPGPStatusEvent)(System::TObject* Sender, TipcOpenPGPStatusEventParams *e);
__property TipcOpenPGPStatusEvent OnStatus = { read=FOnStatus, write=FOnStatus };

Remarks

The event is fired for informational and logging purposes only. It may be used to track the progress of an operation.

The level of detail is controlled by the LogLevel setting.

VerificationStatus Event (OpenPGP Component)

Fired after verification of the signed message.

Syntax

typedef struct {
  String KeyId;
  int Status;
} TipcOpenPGPVerificationStatusEventParams;
typedef void __fastcall (__closure *TipcOpenPGPVerificationStatusEvent)(System::TObject* Sender, TipcOpenPGPVerificationStatusEventParams *e);
__property TipcOpenPGPVerificationStatusEvent OnVerificationStatus = { read=FOnVerificationStatus, write=FOnVerificationStatus };

Remarks

This event fires when VerifySignature or DecryptAndVerifySignature is called. It provides information about the result.

KeyId is the Id of the key used to sign the message. It is the hex-encoded, 4-or 8-byte Id of the key. It is the same as the last 4 or 8 bytes of the Fingerprint. For instance:

BF52A0AB

Status holds the result of the operation. Possible values are:

0Verification succeeded
1Verification failed
2The required key could not be found
3Verification succeeded but the key is expired.

Config Settings (OpenPGP Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

OpenPGP Config Settings

AllowEmptyInput:   Whether to allow empty files for input.

This setting controls whether the component allows empty input when processing. When True, the component will process 0 byte files specified by InputFile, or 0 byte messages specified by InputMessage. The default value is False.

AllowOldPacketType:   Whether to allow the older encrypted packet type.

By default the component will only encrypt data using the newer and more secure integrity protected data packet type. Old implementations such as PGP 6.5.8 may require the older less secure data packet type.

When set to True the component will read the features from the recipient key to determine if the older packet type is required. If the key does require the old packet type, then the older packet type will be used. If the key does not require the old packet type, then the new integrity protected packet type will still be used.

By default this value is False. This means under no conditions is the older less secure packet type used. The newer integrity protected packet type is always used.

Only enable this setting if you have a requirement to do so.

CloseInputStreamAfterProcessing:   Determines whether or not the input stream is closed after processing.

Determines whether or not the input stream set by SetInputStream is closed after processing is complete. The default value is True.

CloseOutputStreamAfterProcessing:   Determines whether or not the output stream is closed after processing.

Determines whether or not the output stream set by SetOutputStream is closed after processing is complete. The default value is True.

CompressionLevel:   The level of compression used.

This setting specifies the level of compression used: possible values depend on the value of CompressionMethod and are detailed below.

zlib 1-6
zip 1-6
bzip21-9
Higher values will cause the component to compress better; lower values will cause the component to compress faster. The default value for all methods is 4.
DeleteOutputFileOnError:   Whether to delete the output file on an error.

Set this to true to automatically delete any partially written OutputFile if an error occurs. The default is false

DetachedSignatureData:   The detached signature.

This setting is used to specify the detached signature before calling VerifySignature. The message data should be specified normally and this setting should be set to the detached signature data. Both hex-string and OpenPGP ASCII-armored message formats are allowed. Hex-encoded data should be provided as a string like so:

89011C04000102000605025100459B000A0910E2...
EnsureValidDSASignatureHashAlgorithm:   Whether or not to select a suitable signature hash algorithm automatically.

This setting specifies whether the component ensures a valid hash algorithm is selected for use with the loaded DSA or ECDSA key. The default value is True.

DSA Notes

DSA requires that the hash be 160 bits or larger, which means MD5 is not a suitable algorithm. When DSA Signature Hash Algorithm selection is enabled (default) the component will use the preferred algorithm from the key if it meets the requirements for DSA. If the preferred algorithm is MD5 and does not meed the requirements for DSA the component will automatically use a suitable algorithm based on the Q element of the DSA key (may be SHA1, SHA224, or SHA256).

ECDSA Notes

The ECDSA Signature Hash Algorithm requirements are directly related to the KeyCurve used by the key. When this setting is enabled (default) the component will use the preferred algorithm from the key if it meets the requirements for ECDSA. If the preferred algorithm does not meet the requirements the component will automatically select a valid hash algorithm based on the curve as follows:

CurveHash Algorithm
secp256r1 SHA256
secp384r1 SHA384
secp521r1 SHA512
secp256k1 SHA256

FileName:   The original name of the encrypted file.

When encrypting, this configuration setting can be used to specify the original name of the encrypted data. When specifying an InputFile to encrypt from, this is included automatically in the encrypted packet. After decrypting, this will contain the file name of the original encrypted file.

KeyIdLength:   The length of the KeyId available.

This controls the length of KeyId available when RecipientInfo fires. Possible values are 4 (default) or 8.

KeySelectionMethod:   The method used to select a key for encryption or signing.

When more than one key is present this component can be configured to automatically select a key based on certain criteria (described below) or allow for manual selection.

0 Automatic selection, first suitable subkey. Expired keys accepted.
1 Automatic selection, first suitable subkey. Expired keys not accepted.
2 Automatic selection, newest suitable subkey. Expired keys not accepted (Default).
99 Manual Selection.
A key's suitability is determined by its usage flags.

Manual Selection

To manually select a key for any operation pass the key's Id in the constructor. Openpgp pgp = new Openpgp(); pgp.Config("KeySelectionMethod=99"); pgp.RecipientKeys.Add(new Key(@"C:\path\to\key.asc", "7CA1376C39768977")); // Key with Id 7CA1376C39768977 will be used for encryption.

LogLevel:   Specifies the level of detail that is logged.

This setting controls the level of detail that is logged through the Status event. Possible values are:

0 (None)No events are logged.
1 (Info - default)Informational events are logged.
2 (Verbose)Detailed data is logged.
3 (Debug)Debug data is logged.
PGPZipDir:   The directory used when creating or extracting a PGP zip file.

A PGP zip file is a Tar archive that is encrypted. It is commonly used by utilities to protect multiple files in one OpenPGP message. The component supports creating and extracting these types of files.

  • To create a PGP zip file set this value to a location on disk including a filemask and call Encrypt. For instance: OpenPGP1.Config("PGPZipDir=C:\MyFiles\*.txt"); OpenPGP1.OutputFile = "C:\PGPZip.pgp"; OpenPGP1.Encrypt(); The created file returned in the OutputFile property is the PGP zip. If InputFile is specified it is used to temporarily hold the Tar archive while creating the PGP zip file. The temporary file is not automatically deleted. If InputFile is not specified the Tar archive is held in memory while creating the PGP zip file.
  • To extract a PGP zip file set this value to a location on disk and call Decrypt. For instance: OpenPGP1.Config("PGPZipDir=C:\MyFiles"); OpenPGP1.InputFile = "C:\PGPZip.pgp"; OpenPGP1.Decrypt(); The extracted files will be present in the specified directory. If OutputFile is specified it is used to temporarily hold the Tar archive. The temporary file is not automatically deleted. If OutputFile is not specified the Tar archive is held in memory while extracting the PGP zip file. Note that if the OpenPGP message supplied is not a PGP zip file the decryption will occur as normal without error.

ProgressEventThreshold:   The amount of data in bytes to process before firing the progress event.

When encrypting or decrypting, the Progress event is fired as data is processed by the component. When this setting is specified, the event will only fire after processing at least the specified number of bytes. The default value is 0.

PublicKeyringFile:   The file name of the public keyring file.

This specifies the name of the public keyring file. The default value is "pubring.gpg". This may be set to a file name only, or a full path including the file name.

ReadFromProgressEvent:   Whether to read input data from inside the progress event.

When set to True this setting allows input data to be specified from within the Progress event. The component will repeatedly fire the Progress event to ask for data. Inside the event set InputMessage when the Operation parameter of the event is 1 (Read). When all data has been provided set the IsEOF parameter of the event to True. This allows input data to be chunked and provided piece by piece. The default value is False.

RecursiveDecryptMode:   Whether the encrypted data should be decrypted recursively.

In some instances data will be encrypted multiple times. This configuration option determines how the component will handle this situation. Options are:

0Automatic - If the PGP message contains the special header version "PGP Command Line" then recursive decryption will be attempted. (Default)
1Always attempt recursive decryption.
2Never attempt recursive decryption.
RequireEncryption:   Whether to throw an error when decrypting and encryption is not detected.

By default, the component's decryption methods will succeed if the message is not encrypted. To cause an error to be thrown in this case, set this option to true.

The default value is false.

RequireIntegrityProtectedPacket:   Whether an MDC packet is required for decryption.

When set to true, the component will throw an exception if the message being decrypted does not contain a Message Detection Code (MDC) packet. The default value is false.

RequireSignature:   Whether to throw an error when verifying a signature and no signature is found.

By default, the component's signature verification methods will succeed if the message is not signed. To cause an error to be thrown in this case, set this option to true.

The default value is false.

RequireValidSignature:   Specifies if an invalid signature is considered an error condition.

By default, if the signature is not valid the component raises an exception. This setting may be set to False to disable this requirement. When False, the Status parameter of the VerificationStatus event should be checked to determine the result of the operation. The default value is True.

SecretKeyringFile:   The file name of the secret keyring file.

This specifies the name of the secret keyring file. The default value is "secring.gpg". This may be set to a file name only, or a full path including the file name.

SplitHeaders:   Controls whether ASCII Armor headers are split or not.

By default, when headers are specified via MessageHeaders, the component will split headers over a certain length onto multiple lines. This is done to avoid potential errors during transport of the message. If false, the headers will be on one line regardless of length. The default value is True.

SymmetricPassphrase:   The password used for symmetric encryption or decryption.

This setting specifies the passphrase when using symmetric encryption. If a value is provided, symmetric encryption/decryption will be attempted. In this case no keys are used for either encryption or decryption. Only Encrypt and Decrypt are valid operations when a value is set. Sign, SignAndEncrypt, VerifySignature, and DecryptAndVerifySignature are not valid operations when using this option.

UseFipsCompliantAlgorithms:   Restricts the usage to FIPS compliant algorithms only.

When enabled the component will only support FIPS compliant algorithms. If a non-FIPS compliant algorithm is used an exception is thrown. The following algorithms are supported when this setting is True:

  • 3DES
  • AES128
  • AES192
  • AES256
  • RSA
  • DSA
  • SHA1
  • SHA256
  • SHA384
  • SHA512
  • SHA224
The default value is False.
VersionHeader:   The Version header value in the ASCII armored OpenPGP message.

This setting specifies the Version header value included in the ASCII armored OpenPGP message. This may be set before calling Encrypt, Sign, or SignAndEncrypt. The default value is "IPWorks! OpenPGP 2022".

This setting will be populated after calling Decrypt, VerifySignature, or DecryptAndVerifySignature.

WriteToProgressEvent:   Whether to write output data so it is accessible from inside the progress event.

When set to True this setting allows output data to be obtained from within the Progress event. The component will repeatedly fire the Progress event to provide output data. Inside the event check OutputMessage when the Operation parameter of the event is 2 (Write). The IsEOF parameter should be checked inside the event to determine when all output data has been provided. This allows output data to be chunked and obtained piece by piece. The default value is False.

Base Config Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage:   The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

IdentifierName
037IBM EBCDIC - U.S./Canada
437OEM - United States
500IBM EBCDIC - International
708Arabic - ASMO 708
709Arabic - ASMO 449+, BCON V4
710Arabic - Transparent Arabic
720Arabic - Transparent ASMO
737OEM - Greek (formerly 437G)
775OEM - Baltic
850OEM - Multilingual Latin I
852OEM - Latin II
855OEM - Cyrillic (primarily Russian)
857OEM - Turkish
858OEM - Multilingual Latin I + Euro symbol
860OEM - Portuguese
861OEM - Icelandic
862OEM - Hebrew
863OEM - Canadian-French
864OEM - Arabic
865OEM - Nordic
866OEM - Russian
869OEM - Modern Greek
870IBM EBCDIC - Multilingual/ROECE (Latin-2)
874ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875IBM EBCDIC - Modern Greek
932ANSI/OEM - Japanese, Shift-JIS
936ANSI/OEM - Simplified Chinese (PRC, Singapore)
949ANSI/OEM - Korean (Unified Hangul Code)
950ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026IBM EBCDIC - Turkish (Latin-5)
1047IBM EBCDIC - Latin 1/Open System
1140IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141IBM EBCDIC - Germany (20273 + Euro symbol)
1142IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144IBM EBCDIC - Italy (20280 + Euro symbol)
1145IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147IBM EBCDIC - France (20297 + Euro symbol)
1148IBM EBCDIC - International (500 + Euro symbol)
1149IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201Unicode UCS-2 Big-Endian
1250ANSI - Central European
1251ANSI - Cyrillic
1252ANSI - Latin I
1253ANSI - Greek
1254ANSI - Turkish
1255ANSI - Hebrew
1256ANSI - Arabic
1257ANSI - Baltic
1258ANSI/OEM - Vietnamese
1361Korean (Johab)
10000MAC - Roman
10001MAC - Japanese
10002MAC - Traditional Chinese (Big5)
10003MAC - Korean
10004MAC - Arabic
10005MAC - Hebrew
10006MAC - Greek I
10007MAC - Cyrillic
10008MAC - Simplified Chinese (GB 2312)
10010MAC - Romania
10017MAC - Ukraine
10021MAC - Thai
10029MAC - Latin II
10079MAC - Icelandic
10081MAC - Turkish
10082MAC - Croatia
12000Unicode UCS-4 Little-Endian
12001Unicode UCS-4 Big-Endian
20000CNS - Taiwan
20001TCA - Taiwan
20002Eten - Taiwan
20003IBM5550 - Taiwan
20004TeleText - Taiwan
20005Wang - Taiwan
20105IA5 IRV International Alphabet No. 5 (7-bit)
20106IA5 German (7-bit)
20107IA5 Swedish (7-bit)
20108IA5 Norwegian (7-bit)
20127US-ASCII (7-bit)
20261T.61
20269ISO 6937 Non-Spacing Accent
20273IBM EBCDIC - Germany
20277IBM EBCDIC - Denmark/Norway
20278IBM EBCDIC - Finland/Sweden
20280IBM EBCDIC - Italy
20284IBM EBCDIC - Latin America/Spain
20285IBM EBCDIC - United Kingdom
20290IBM EBCDIC - Japanese Katakana Extended
20297IBM EBCDIC - France
20420IBM EBCDIC - Arabic
20423IBM EBCDIC - Greek
20424IBM EBCDIC - Hebrew
20833IBM EBCDIC - Korean Extended
20838IBM EBCDIC - Thai
20866Russian - KOI8-R
20871IBM EBCDIC - Icelandic
20880IBM EBCDIC - Cyrillic (Russian)
20905IBM EBCDIC - Turkish
20924IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932JIS X 0208-1990 & 0121-1990
20936Simplified Chinese (GB2312)
21025IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027Extended Alpha Lowercase
21866Ukrainian (KOI8-U)
28591ISO 8859-1 Latin I
28592ISO 8859-2 Central Europe
28593ISO 8859-3 Latin 3
28594ISO 8859-4 Baltic
28595ISO 8859-5 Cyrillic
28596ISO 8859-6 Arabic
28597ISO 8859-7 Greek
28598ISO 8859-8 Hebrew
28599ISO 8859-9 Latin 5
28605ISO 8859-15 Latin 9
29001Europa 3
38598ISO 8859-8 Hebrew
50220ISO 2022 Japanese with no halfwidth Katakana
50221ISO 2022 Japanese with halfwidth Katakana
50222ISO 2022 Japanese JIS X 0201-1989
50225ISO 2022 Korean
50227ISO 2022 Simplified Chinese
50229ISO 2022 Traditional Chinese
50930Japanese (Katakana) Extended
50931US/Canada and Japanese
50933Korean Extended and Korean
50935Simplified Chinese Extended and Simplified Chinese
50936Simplified Chinese
50937US/Canada and Traditional Chinese
50939Japanese (Latin) Extended and Japanese
51932EUC - Japanese
51936EUC - Simplified Chinese
51949EUC - Korean
51950EUC - Traditional Chinese
52936HZ-GB2312 Simplified Chinese
54936Windows XP: GB18030 Simplified Chinese (4 Byte)
57002ISCII Devanagari
57003ISCII Bengali
57004ISCII Tamil
57005ISCII Telugu
57006ISCII Assamese
57007ISCII Oriya
57008ISCII Kannada
57009ISCII Malayalam
57010ISCII Gujarati
57011ISCII Punjabi
65000Unicode UTF-7
65001Unicode UTF-8
The following is a list of valid code page identifiers for Mac OS only:
IdentifierName
1ASCII
2NEXTSTEP
3JapaneseEUC
4UTF8
5ISOLatin1
6Symbol
7NonLossyASCII
8ShiftJIS
9ISOLatin2
10Unicode
11WindowsCP1251
12WindowsCP1252
13WindowsCP1253
14WindowsCP1254
15WindowsCP1250
21ISO2022JP
30MacOSRoman
10UTF16String
0x90000100UTF16BigEndian
0x94000100UTF16LittleEndian
0x8c000100UTF32String
0x98000100UTF32BigEndian
0x9c000100UTF32LittleEndian
65536Proprietary

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
  • Last Valid Build: The last valid build number for which the license will work.
MaskSensitive:   Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseInternalSecurityAPI:   Tells the component whether or not to use the system security libraries or an internal implementation.

When set to false, the component will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this setting to true tells the component to use the internal implementation instead of using the system security libraries.

This setting is set to false by default on all platforms.

Trappable Errors (OpenPGP Component)

OpenPGP Errors

101   Cannot decode ASCII Armor data.
102   Unknown ASCII Armor data type.
103   Checksum failed.
104   Unknown ASCII Armor header.
105   Cannot decode PGP packet.
106   Cannot encode PGP packet.
107   Unknown PGP packet tag.
108   Unsupported version.
109   Unsupported algorithm.
110   Unknown subpacket.
111   Internal error.
112   Feature not supported.
113   Secret data was not encrypted.
114   Cannot find the key.
115   Error reading file.
116   Error writing file.
117   Error reading key.
118   Error writing key.
119   Cannot verify signature.
120   Cannot create signature.
121   Invalid UserId.
122   Invalid passphrase.
123   Data encryption failed.
124   Error creating key.
125   Unsupported symmetric algorithm.
126   Unsupported hash.
127   Unsupported compression algorithm.
128   Invalid key usage.
129   Component is busy.
130   Error decrypting data.
131   Data is not compressed.
132   Error decompressing data.
133   Error compressing data.
134   Unsupported signature.
135   Failed to overwrite file.
141   No input.
142   Signing was required, but the message was not signed.
143   Encryption was required, but the message was not encrypted.
146   No data integrity packet was found (MDC), but one was required.
200   Out of memory.