ECC Component
Properties Methods Events Config Settings Errors
The ECC (Elliptic Curve Cryptography) component implements ECDSA, EdDSA, ECDH, and ECIES operations.
Syntax
TipcECC
Remarks
The ECC (Elliptic Curve Cryptography) component implements ECDSA (Elliptic Curve Digital Signature Algorithm), EdDSA (Edwards-curve Digital Signature Algorithm), and ECDH (Elliptic Curve Diffie Hellman), and ECIES (Elliptic Curve Integrated Encryption Scheme) operations. The component supports the following common operations:
- CreateKey allows key creation using algorithms such as secp256r1, secp384r1, secp521r1, X25519, X448, Ed25519, Ed448, and more.
- ComputeSecret computes a shared secret between two parties using a public and private key (ECDH).
- Sign and VerifySignature provides a way to digitally sign data and verify signatures (ECDSA and EdDSA).
- Encrypt and Decrypt encrypt and decrypt data using a public and private key (ECIES).
The component is very flexible and offers many properties and configuration settings to configure the component. The sections below detail the use of the component for each of the major operations listed above.
Key Creation and Management
CreateKey creates a new public and private key.
When this method is called Key is populated with the generated key. The PublicKey and PrivateKey property hold the PEM formatted public and private key for ease of use. This is helpful for storing or transporting keys more easily.
The KeyAlgorithm parameter specifies the algorithm for which the key is intended to be used. Possible values are:
NIST, Koblitz, and Brainpool Curve Notes
Keys for use with NIST curves (secp256r1, secp384r1, secp521r1), Koblitz curves (secp160k1, secp192k1, secp224k1, secp256k1), and Brainpool curves are made up of a number of individual parameters.
The public key consists of the following parameters:
The private key consists of one value:
Curve25519 and Curve448 Notes
Keys for use with Curve25519 or Curve448 are made up of a private key and public key field.
XPk holds the public key.
XSk holds the private key.
Create Key Example (secp256r1 - PEM)
//Create a key using secp256r1
Ecc ecc = new Ecc();
ecc.CreateKey("secp256r1");
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaSecp256r1"
string privKey = ecc.Key.PrivateKey; //PEM formatted key
string pubKey = ecc.Key.PublicKey; //PEM formatted key
//Load the saved key
ecc.Reset();
ecc.Key.PublicKey = pubKey;
ecc.Key.PrivateKey = privKey;
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaSecp256r1"
Create Key Example (secp256r1 - Raw Key Params)
//Create a key using secp256r1 and store/load the key using the individual params
Ecc ecc = new Ecc();
ecc.CreateKey("secp256r1");
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaSecp256r1"
byte[] K = ecc.Key.KB; //Private key param
byte[] Rx = ecc.Key.RxB; //Public key param
byte[] Ry = ecc.Key.RyB; //Public key param
//Load the saved key
ecc.Reset();
ecc.Key.Algorithm = ECAlgorithms.eaSecp256r1; //This MUST be set manually when using key params directly
ecc.Key.KB = K;
ecc.Key.RxB = Rx;
ecc.Key.RyB = Ry;
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaSecp256r1"
Create Key Example (Ed25519 - PEM)
//Create a key using Ed25519
Ecc ecc = new Ecc();
ecc.CreateKey("Ed25519");
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaEd25519"
string privKey = ecc.Key.PrivateKey; //PEM formatted key
string pubKey = ecc.Key.PublicKey; //PEM formatted key
//Load the saved key
ecc.Reset();
ecc.Key.PublicKey = pubKey;
ecc.Key.PrivateKey = privKey;
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaEd25519"
Create Key Example (Ed25519 - Raw Key Params)
//Create a key using Ed25519 and store/load the key using the individual params
Ecc ecc = new Ecc();
ecc.CreateKey("Ed25519");
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaEd25519"
byte[] XPk = ecc.Key.XPkB; //Public key data
byte[] XSk = ecc.Key.XSkB; //Secret key data
//Load the saved key
ecc.Reset();
ecc.Key.Algorithm = ECAlgorithms.eaEd25519; //This MUST be set manually when using key params directly
ecc.Key.XPkB = XPk;
ecc.Key.XSkB = XSk;
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaEd25519"
Compute Secret (ECDH)
This method computes a shared secret using Elliptic Curve Diffie Hellman (ECDH).
When this method is called the component will use the public key specified by PublicKey and the private key specified by Key to compute a shared secret, or secret agreement. The ComputeSecretKDF property specifies the Hash or HMAC algorithm that is applied to the raw secret. The resulting value is held by SharedSecret. The following properties are applicable when calling this method:
- Key (required)
- PublicKey (required)
- ComputeSecretKDF (optional)
See ComputeSecretKDF for details on advanced settings that may be applicable for the chosen algorithm.
Keys created with the Ed25519 and Ed448 algorithms are not supported when calling this method.
Compute Secret Example
//Create a key for Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("X25519");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Create a key for Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("X25519");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Note: the public keys must be exchanged between parties by some mechanism
//Create the shared secret on Party 1
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv; //Private key of this party
ecc1.RecipientKey.PublicKey = ecc2_pub; //Public key of other party
ecc1.UseHex = true; //Hex encodes the shared secret bytes for easier display/storage
ecc1.ComputeSecret();
Console.WriteLine(ecc1.SharedSecret);
//Create the shared secret on Party 2
ecc2.Reset();
ecc2.Key.PrivateKey = ecc2_priv; //Private key of this party
ecc2.RecipientKey.PublicKey = ecc1_pub; //Public key of other party
ecc2.UseHex = true; //Hex encodes the shared secret bytes for easier display/storage
ecc2.ComputeSecret();
Console.WriteLine(ecc2.SharedSecret); //This will match the shared secret created by ecc1.
Signing (ECDSA and EdDSA)
Sign will create a hash signature using ECDSA or EdDSA. The component will use the key specified by Key to has the input data and sign the resulting hash.
Key must contain a private key created with a valid ECDSA or EdDSA algorithm. Algorithm is used to determine the eligibility of the key for this operation. Supported algorithms for signing are:
- NIST Curves (secp256r1, secp384r1, secp521r1)
- Koblitz Curves (secp160k1, secp192k1, secp224k1, secp256k1)
- Brainpool Curves
- Ed25519 and Ed448
See CreateKey for details about key creation and algorithms.
When this method is called data will be read from the InputFile or InputMessage.
The hash to be signed will be computed using the specified HashAlgorithm. The computed hash is stored in the HashValue property. The signed hash is stored in the HashSignature property.
To sign as hash without first computing it set HashValue to a previously computed hash for the input data. Note: HashValue is not applicable when signing with a PureEdDSA algorithm such as "Ed25519" or "Ed448".
The Progress event will fire with updates for the hash computation progress only. The hash signature creation process is quick and does not require progress updates.
After calling Sign the public key must be sent to the recipient along with HashSignature and original input data so the other party may perform signature verification.
The following properties are applicable when calling this method:
- Key (required)
- HashAlgorithm (applicable to ECDSA only)
- HashEdDSA (applicable to EdDSA only)
- HashValue (not applicable to PureEdDSA)
- UseHex
The following properties are populated after calling this method:
EdDSA Notes
When the Algorithm is Ed25519 or Ed448 the following additional parameters are applicable:
EdDSA keys can be used with a PureEdDSA algorithm (Ed25519/Ed448) or as HashEdDSA (Ed25519ph, Ed448ph) algorithm. This is controlled by the HashEdDSA property. By default the component uses the PureEdDSA algorithm.
The PureEdDSA algorithm requires two passes over the input data but provides collision resilience. The collision resilience of PureEdDSA means even if it is feasible to compute collisions for the hash function, the algorithm is still secure. When using PureEdDSA HashValue is not applicable.
When using a HashEdDSA algorithm the input is pre-hashed and supports a single pass over the data during the signing operation. To enable HashEdDSA set HashEdDSA to True.
To specify context data when using Ed25519 or Ed448 set EdDSAContext.
Sign And Verify Example (ECDSA)
//Create an ECDSA key on Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("secp256r1");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Sign the data on Party 1
string originalData = "hello ecc";
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv;
ecc1.InputMessage = originalData;
ecc1.UseHex = true; //Hex encode the hash signature for ease of use.
ecc1.Sign();
string hashSignature = ecc1.HashSignature;
//Transmit the hash signature, public key, and original data to part 2
//Verify the data on Party 2
Ecc ecc2 = new Ecc();
ecc2.SignerKey.PublicKey = ecc1_pub;
ecc2.InputMessage = originalData;
ecc2.HashSignature = hashSignature;
ecc2.UseHex = true; //Decode the hex encoded hash signature
bool isVerified = ecc2.VerifySignature();
Sign And Verify Example (EdDSA - PureEdDSA)
//Create an EdDSA key on Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("ed25519");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Sign the data on Party 1
string originalData = "hello ecc";
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv;
ecc1.InputMessage = originalData;
ecc1.UseHex = true; //Hex encode the hash signature for ease of use.
ecc1.Sign();
string hashSignature = ecc1.HashSignature;
//Transmit the hash signature, public key, and original data to part 2
//Verify the data on Party 2
Ecc ecc2 = new Ecc();
ecc2.SignerKey.PublicKey = ecc1_pub;
ecc2.InputMessage = originalData;
ecc2.HashSignature = hashSignature;
ecc2.UseHex = true; //Decode the hex encoded hash signature
bool isVerified = ecc2.VerifySignature();
Sign And Verify Example (EdDSA - HashEdDSA)
//Create an EdDSA key on Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("ed25519");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Sign the data on Party 1
string originalData = "hello ecc";
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv;
ecc1.InputMessage = originalData;
ecc1.UseHex = true; //Hex encode the hash signature for ease of use.
ecc1.HashEdDSA = true; //Use "ed25519ph"
ecc1.Sign();
string hashSignature = ecc1.HashSignature;
//Transmit the hash signature, public key, and original data to part 2
//Verify the data on Party 2
Ecc ecc2 = new Ecc();
ecc2.SignerKey.PublicKey = ecc1_pub;
ecc2.InputMessage = originalData;
ecc2.HashSignature = hashSignature;
ecc2.HashEdDSA = true;
ecc2.UseHex = true; //Decode the hex encoded hash signature
bool isVerified = ecc2.VerifySignature();
Verifying (ECDSA and EdDSA)
VerifySignature will verify a hash signature and return True if successful or False otherwise.
Before calling this method specify the input file by setting InputFile or InputMessage.
A public key and the hash signature are required to perform the signature verification. Specify the public key in SignerKey. Specify the hash signature in HashSignature.
When this method is called the component will compute the hash for the specified file and populate HashValue. It will verify the signature using the specified SignerKey and HashSignature.
To verify the hash signature without first computing the hash simply specify HashValue before calling this method. Note: HashValue is not applicable when the message was signed with a PureEdDSA algorithm such as Ed25519 or Ed448.
The Progress event will fire with updates for the hash computation progress only. The hash signature verification process is quick and does not require progress updates.
The following properties are applicable when calling this method:
- HashSignature (required)
- SignerKey (required)
- EdDSAContext (applicable to EdDSA only)
- HashAlgorithm (applicable to ECDSA only)
- HashEdDSA (applicable to EdDSA only)
- HashValue (not applicable to PureEdDSA)
- UseHex
Sign And Verify Example (ECDSA)
//Create an ECDSA key on Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("secp256r1");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Sign the data on Party 1
string originalData = "hello ecc";
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv;
ecc1.InputMessage = originalData;
ecc1.UseHex = true; //Hex encode the hash signature for ease of use.
ecc1.Sign();
string hashSignature = ecc1.HashSignature;
//Transmit the hash signature, public key, and original data to part 2
//Verify the data on Party 2
Ecc ecc2 = new Ecc();
ecc2.SignerKey.PublicKey = ecc1_pub;
ecc2.InputMessage = originalData;
ecc2.HashSignature = hashSignature;
ecc2.UseHex = true; //Decode the hex encoded hash signature
bool isVerified = ecc2.VerifySignature();
Sign And Verify Example (EdDSA - PureEdDSA)
//Create an EdDSA key on Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("ed25519");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Sign the data on Party 1
string originalData = "hello ecc";
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv;
ecc1.InputMessage = originalData;
ecc1.UseHex = true; //Hex encode the hash signature for ease of use.
ecc1.Sign();
string hashSignature = ecc1.HashSignature;
//Transmit the hash signature, public key, and original data to part 2
//Verify the data on Party 2
Ecc ecc2 = new Ecc();
ecc2.SignerKey.PublicKey = ecc1_pub;
ecc2.InputMessage = originalData;
ecc2.HashSignature = hashSignature;
ecc2.UseHex = true; //Decode the hex encoded hash signature
bool isVerified = ecc2.VerifySignature();
Sign And Verify Example (EdDSA - HashEdDSA)
//Create an EdDSA key on Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("ed25519");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Sign the data on Party 1
string originalData = "hello ecc";
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv;
ecc1.InputMessage = originalData;
ecc1.UseHex = true; //Hex encode the hash signature for ease of use.
ecc1.HashEdDSA = true; //Use "ed25519ph"
ecc1.Sign();
string hashSignature = ecc1.HashSignature;
//Transmit the hash signature, public key, and original data to part 2
//Verify the data on Party 2
Ecc ecc2 = new Ecc();
ecc2.SignerKey.PublicKey = ecc1_pub;
ecc2.InputMessage = originalData;
ecc2.HashSignature = hashSignature;
ecc2.HashEdDSA = true;
ecc2.UseHex = true; //Decode the hex encoded hash signature
bool isVerified = ecc2.VerifySignature();
Encrypting (ECIES)
Encrypt encrypts the specified data with the ECDSA public key specified in RecipientKey.
Encryption is performed using ECIES which requires an ECDSA key. RecipientKey must contain an ECDSA key. Algorithm is used to determine the eligibility of the key for this operation. Supported algorithms for encryption are:
- NIST Curves (secp256r1, secp384r1, secp521r1)
- Koblitz Curves (secp160k1, secp192k1, secp224k1, secp256k1)
- Brainpool Curves
See CreateKey for details about key creation and algorithms.
When this method is called the component will encrypt the specified data using ECIES and the encrypted data will be output. To hex encode the output set UseHex to True.
The following properties are applicable when calling this method:
- EncryptionAlgorithm
- HMACAlgorithm
- HMACOptionalInfo
- HMACKeySize
- IV
- KDF
- KDFHashAlgorithm
- KDFOptionalInfo
- UseHex
Input and Output Properties
The component will determine the source and destination of the input and output based on which properties are set.
The order in which the input properties are checked is as follows:
When a valid source is found the search stops. The order in which the output properties are checked is as follows:
- SetOutputStream
- OutputFile
- OutputMessage: The output data is written to this property if no other destination is specified.
When using streams you may need to additionally set CloseInputStreamAfterProcessing or CloseOutputStreamAfterProcessing.
Encrypt and Decrypt Example
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message to Party 2
//Decrypt the message using the private key for Party 2
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt and Decrypt Example (AES with IV)
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
//Use an IV (16 bytes for AES) - In a real environment this should be random
byte[] IV = new byte[] { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F };
ecc1.EncryptionAlgorithm = EccEncryptionAlgorithms.iesAES;
ecc1.IVB = IV;
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message and the IV to Party 2
//Decrypt the message using the private key for Party 2 and the IV
ecc2.EncryptionAlgorithm = EccEncryptionAlgorithms.iesAES;
ecc2.IVB = IV;
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt and Decrypt Example (XOR Encryption Algorithm)
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
ecc1.EncryptionAlgorithm = EccEncryptionAlgorithms.iesXOR;
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message to Party 2
//Decrypt the message using the private key for Party 2
ecc2.EncryptionAlgorithm = EccEncryptionAlgorithms.iesXOR;
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt and Decrypt Example (KDF Options)
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
ecc1.KDF = "KDF1"; //Use KDF1
ecc1.KDFHashAlgorithm = EccKDFHashAlgorithms.iesSHA1;
ecc1.Config("KDFOptionalInfo=202122232425262728292a2b2c2d2e2f"); //Hex encoded string
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message to Party 2
//Decrypt the message using the private key for Party 2
ecc2.KDF = "KDF1";
ecc2.KDFHashAlgorithm = EccKDFHashAlgorithms.iesSHA1;
ecc2.Config("KDFOptionalInfo=202122232425262728292a2b2c2d2e2f");
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Decrypting (ECIES)
Decrypt decrypts the specified data with the ECDSA private key specified in Key.
Decryption is performed using ECIES which requires an ECDSA key. Key must contain an ECDSA key. Algorithm is used to determine the eligibility of the key for this operation. Supported algorithms for encryption are:
- NIST Curves (secp256r1, secp384r1, secp521r1)
- Koblitz Curves (secp160k1, secp192k1, secp224k1, secp256k1)
- Brainpool Curves
See CreateKey for details about key creation and algorithms.
When this method is called the component will decrypt the specified data using ECIES and the decrypted data will be output. If the input data was originally hex encoded, set UseHex to True.
The following properties are applicable when calling this method:
- EncryptionAlgorithm
- HMACAlgorithm
- HMACOptionalInfo
- HMACKeySize
- IV
- KDF
- KDFHashAlgorithm
- KDFOptionalInfo
- UseHex
Input and Output Properties
The component will determine the source and destination of the input and output based on which properties are set.
The order in which the input properties are checked is as follows:
When a valid source is found the search stops. The order in which the output properties are checked is as follows:
- SetOutputStream
- OutputFile
- OutputMessage: The output data is written to this property if no other destination is specified.
When using streams you may need to additionally set CloseInputStreamAfterProcessing or CloseOutputStreamAfterProcessing.
Encrypt and Decrypt Example
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message to Party 2
//Decrypt the message using the private key for Party 2
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt and Decrypt Example (AES with IV)
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
//Use an IV (16 bytes for AES) - In a real environment this should be random
byte[] IV = new byte[] { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F };
ecc1.EncryptionAlgorithm = EccEncryptionAlgorithms.iesAES;
ecc1.IVB = IV;
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message and the IV to Party 2
//Decrypt the message using the private key for Party 2 and the IV
ecc2.EncryptionAlgorithm = EccEncryptionAlgorithms.iesAES;
ecc2.IVB = IV;
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt and Decrypt Example (XOR Encryption Algorithm)
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
ecc1.EncryptionAlgorithm = EccEncryptionAlgorithms.iesXOR;
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message to Party 2
//Decrypt the message using the private key for Party 2
ecc2.EncryptionAlgorithm = EccEncryptionAlgorithms.iesXOR;
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt and Decrypt Example (KDF Options)
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
ecc1.KDF = "KDF1"; //Use KDF1
ecc1.KDFHashAlgorithm = EccKDFHashAlgorithms.iesSHA1;
ecc1.Config("KDFOptionalInfo=202122232425262728292a2b2c2d2e2f"); //Hex encoded string
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message to Party 2
//Decrypt the message using the private key for Party 2
ecc2.KDF = "KDF1";
ecc2.KDFHashAlgorithm = EccKDFHashAlgorithms.iesSHA1;
ecc2.Config("KDFOptionalInfo=202122232425262728292a2b2c2d2e2f");
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Property List
The following is the full list of the properties of the component with short descriptions. Click on the links for further details.
ComputeSecretKDF | The key derivation function. |
EncryptionAlgorithm | The encryption algorithm to use. |
HashAlgorithm | The hash algorithm used for hash computation. |
HashEdDSA | Whether to use HashEdDSA when signing with an Ed25519 or Ed448 key. |
HashSignature | The hash signature. |
HashValue | The hash value of the data. |
HMACAlgorithm | The HMAC algorithm to use during encryption. |
InputFile | The file to process. |
InputMessage | The message to process. |
IV | The initialization vector (IV) used when encrypting. |
KDF | The key derivation function used during encryption and decryption. |
KDFHashAlgorithm | The KDF hash algorithm to use when encrypting and decrypting. |
Key | The ECC key. |
OutputFile | The output file when encrypting or decrypting. |
OutputMessage | The output message when encrypting or decrypting. |
Overwrite | Indicates whether or not the component should overwrite files. |
RecipientKey | The public key used to compute the shared secret. |
SharedSecret | The computed shared secret. |
SignerKey | The public key used to verify the signature. |
UseHex | Whether binary values are hex encoded. |
Method List
The following is the full list of the methods of the component with short descriptions. Click on the links for further details.
ComputeSecret | Computes a shared secret. |
Config | Sets or retrieves a configuration setting. |
CreateKey | Creates a new key. |
Decrypt | Decrypted the specified data. |
Encrypt | Encrypts the specified data. |
Reset | Resets the component. |
SetInputStream | Sets the stream from which the component will read data to encrypt or decrypt. |
SetOutputStream | Sets the stream to which the component will write encrypted or decrypted data. |
Sign | Creates a hash signature using ECDSA or EdDSA. |
VerifySignature | Verifies the signature for the specified data. |
Event List
The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.
Error | Fired when information is available about errors during data delivery. |
Progress | Fired as progress is made. |
Config Settings
The following is a list of config settings for the component with short descriptions. Click on the links for further details.
AppendSecret | An optional string to append to the secret agreement. |
CNGECDHKey | The CNG ECDH key. |
CNGECDSAKey | The CNG ECDSA key. |
ConcatAlgorithmId | Specifies the AlgorithmId subfield of the OtherInfo field. |
ConcatHashAlgorithm | The hash algorithm to use when ComputeSecretKDF is Concat. |
ConcatPartyUInfo | Specifies the PartyUInfo subfield of the OtherInfo field. |
ConcatPartyVInfo | Specifies the PartyVInfo subfield of the OtherInfo field. |
ConcatSuppPrivInfo | Specifies the SuppPrivInfo subfield of the OtherInfo field. |
ConcatSuppPubInfo | Specifies the SuppPubInfo subfield of the OtherInfo field. |
ECDSASignatureFormat | The format of the HashSignature when using ECDSA keys. |
EdDSAContext | A hex encoded string holding the bytes of the context when signing or verifying with Ed25519ctx. |
EncryptionKeySize | The encryption key size. |
HMACKey | A key to use when generating a Hash-based Message Authentication Code (HMAC). |
HMACKeySize | Specifies the HMAC key size to be used during encryption. |
HMACOptionalInfo | Optional data to be used during encryption and decryption during the HMAC step. |
KDFOptionalInfo | Optional data to be used during encryption and decryption during the key derivation step. |
PrependSecret | An optional string to prepend to the secret agreement. |
StrictKeyValidation | Whether to validate provided public keys based on private keys. |
TLSLabel | The TLS PRF label. |
TLSSeed | The TLS PRF Seed. |
BuildInfo | Information about the product's build. |
CodePage | The system code page used for Unicode to Multibyte translations. |
LicenseInfo | Information about the current license. |
MaskSensitive | Whether sensitive data is masked in log messages. |
UseInternalSecurityAPI | Whether or not to use the system security libraries or an internal implementation. |
ComputeSecretKDF Property (ECC Component)
The key derivation function.
Syntax
property ComputeSecretKDF: TipcECCComputeSecretKDFs read get_ComputeSecretKDF write set_ComputeSecretKDF;
TipcECCComputeSecretKDFs = ( ekdSHA1, ekdSHA256, ekdSHA384, ekdSHA512, ekdMD2, ekdMD4, ekdMD5, ekdHMACSHA1, ekdHMACSHA256, ekdHMACSHA384, ekdHMACSHA512, ekdHMACMD5, ekdTLS, ekdConcat );
Default Value
ekdSHA256
Remarks
This property specifies the key derivation function (KDF) and algorithm to use when calling ComputeSecret.
Possible values are:
0 (ekdSHA1) | SHA-1 |
1 (ekdSHA256 - default) | SHA-256 |
2 (ekdSHA384) | SHA-384 |
3 (ekdSHA512) | SHA-512 |
4 (ekdMD2) | MD2 |
5 (ekdMD4) | MD4 |
6 (ekdMD5) | MD5 |
7 (ekdHMACSHA1) | HMAC-SHA1 |
8 (ekdHMACSHA256) | HMAC-SHA256 |
9 (ekdHMACSHA384) | HMAC-SHA384 |
10 (ekdHMACSHA512) | HMAC-SHA512 |
11 (ekdHMACMD5) | HMAC-MD5 |
12 (ekdTLS) | TLS |
13 (ekdConcat) | Concat |
HMAC Notes
If an HMAC algorithm is selected HMACKey may optionally be set to specify the key.
TLS Notes
When set to TLS, TLSSeed and TLSLabel are required. In addition PrependSecret and AppendSecret are not applicable.
Concat Notes
If Concat is selected the following configuration settings are applicable:
- ConcatAlgorithmId (required)
- ConcatPartyUInfo (required)
- ConcatPartyVInfo (required)
- ConcatSuppPubInfo
- ConcatSuppPrivInfo
- ConcatHashAlgorithm
EncryptionAlgorithm Property (ECC Component)
The encryption algorithm to use.
Syntax
property EncryptionAlgorithm: TipcECCEncryptionAlgorithms read get_EncryptionAlgorithm write set_EncryptionAlgorithm;
TipcECCEncryptionAlgorithms = ( iesAES, iesTripleDES, iesXOR );
Default Value
iesAES
Remarks
This setting specifies the encryption algorithm to use when Encrypt is called. This must also be set before calling Decrypt to match the algorithm used during the initial encryption.
Possible values are:
- 0 (iesAES - default)
- 1 (iesTripleDES)
- 2 (iesXOR)
AES Notes
When EncryptionAlgorithm is set to iesAES AES CBC with a default key size of 256 bits is used. To specify a different key size set EncryptionKeySize.HashAlgorithm Property (ECC Component)
The hash algorithm used for hash computation.
Syntax
property HashAlgorithm: TipcECCHashAlgorithms read get_HashAlgorithm write set_HashAlgorithm;
TipcECCHashAlgorithms = ( ehaSHA1, ehaSHA224, ehaSHA256, ehaSHA384, ehaSHA512, ehaMD2, ehaMD4, ehaMD5, ehaMD5SHA1, ehaRIPEMD160 );
Default Value
ehaSHA256
Remarks
This property specifies the hash algorithm used for hash computation. This is only applicable when calling Sign or VerifySignature and Algorithm specifies a ECDSA key (NIST, Koblitz, or Brainpool curve). Possible values are:
0 (ehaSHA1) | SHA-1 |
1 (ehaSHA224) | SHA-224 |
2 (ehaSHA256 - default) | SHA-256 |
3 (ehaSHA384) | SHA-384 |
4 (ehaSHA512) | SHA-512 |
5 (ehaMD2) | MD2 |
6 (ehaMD4) | MD4 |
7 (ehaMD5) | MD5 |
8 (ehaMD5SHA1) | MD5SHA-1 |
9 (ehaRIPEMD160) | RIPEMD-160 |
When Algorithm specified an EdDSA key this setting is not applicable, as the hash algorithm is defined by the specification as SHA-512 for Ed25519 and SHAKE-256 for Ed448.
HashEdDSA Property (ECC Component)
Whether to use HashEdDSA when signing with an Ed25519 or Ed448 key.
Syntax
property HashEdDSA: Boolean read get_HashEdDSA write set_HashEdDSA;
Default Value
false
Remarks
This setting specifies whether to use the HashEdDSA algorithm when signing and verifying with Ed25519 or Ed448 keys.
If set to True the component will use the HashEdDSA algorithm (Ed25519ph or Ed448ph) when signing and verifying. When using a HashEdDSA algorithm the input is pre-hashed and supports a single pass over the data during the signing operation.
If set to False (Default) the component will use the PureEdDSA algorithm (Ed25519 or Ed448) when signing. The PureEdDSA requires two passes over the input data but provides collision resilience. The collision resilience of PureEdDSA means even if it is feasible to compute collisions for the hash function, the algorithm is still secure.
This property is only applicable when calling Sign and Algorithm is set to Ed25519 or Ed448.
If this property is set before calling Sign it must be set before calling VerifySignature.
HashSignature Property (ECC Component)
The hash signature.
Syntax
property HashSignature: String read get_HashSignature write set_HashSignature; property HashSignatureB: TBytes read get_HashSignatureB write set_HashSignatureB;
Default Value
''
Remarks
This property holds the computed hash signature. This is populated after calling Sign. This must be set before calling VerifySignature.
HashValue Property (ECC Component)
The hash value of the data.
Syntax
property HashValue: String read get_HashValue write set_HashValue; property HashValueB: TBytes read get_HashValueB write set_HashValueB;
Default Value
''
Remarks
This property holds the computed hash value for the specified data. This is populated when calling Sign or VerifySignature when an input file is specified by setting InputFile or InputMessage.
Pre-existing hash values may be set to this property before calling Sign or VerifySignature. If you know the hash value prior to using the component you may specify the pre-computed hash value here.
This setting is not applicable to PureEdDSA algorithms. If Algorithm is Ed25519 or Ed448 and HashEdDSA is False (default), the PureEdDSA algorithm is use and HashValue is not applicable.
Hash Notes
The component will determine whether or not to recompute the hash based on the properties that are set. If a file is specified by InputFile or InputMessage the hash will be recomputed when calling Sign or VerifySignature. If the HashValue property is set the component will only sign the hash or verify the hash signature. Setting InputFile or InputMessage clears the HashValue property. Setting the HashValue property clears the input file selection.
HMACAlgorithm Property (ECC Component)
The HMAC algorithm to use during encryption.
Syntax
property HMACAlgorithm: TipcECCHMACAlgorithms read get_HMACAlgorithm write set_HMACAlgorithm;
TipcECCHMACAlgorithms = ( iesHMACSHA1, iesHMACSHA224, iesHMACSHA256, iesHMACSHA384, iesHMACSHA512, iesHMACRIPEMD160 );
Default Value
iesHMACSHA256
Remarks
This property specifies the HMAC algorithm to use when encrypting. The HMAC algorithm is used when Encrypt and Decrypt are called to protect and verify data. Possible values are:
- 0 (iesHMACSHA1)
- 1 (iesHMACSHA224)
- 2 (iesHMACSHA256 - Default)
- 3 (iesHMACSHA384)
- 4 (iesHMACSHA512)
- 5 (iesHMACRIPEMD160)
This property is only applicable when calling Encrypt or Decrypt.
InputFile Property (ECC Component)
The file to process.
Syntax
property InputFile: String read get_InputFile write set_InputFile;
Default Value
''
Remarks
This property specifies the file to be processed. Set this property to the full or relative path to the file which will be processed.
Input and Output Properties
The component will determine the source and destination of the input and output based on which properties are set.
The order in which the input properties are checked is as follows:
- SetInputStream
- InputFile
- InputMessage
When a valid source is found the search stops. The order in which the output properties are checked is as follows:
- SetOutputStream
- OutputFile
- OutputMessage: The output data is written to this property if no other destination is specified.
When using streams you may need to additionally set CloseInputStreamAfterProcessing or CloseOutputStreamAfterProcessing.
InputMessage Property (ECC Component)
The message to process.
Syntax
property InputMessage: String read get_InputMessage write set_InputMessage; property InputMessageB: TBytes read get_InputMessageB write set_InputMessageB;
Default Value
''
Remarks
This property specifies the message to be processed.
Input and Output Properties
The component will determine the source and destination of the input and output based on which properties are set.
The order in which the input properties are checked is as follows:
- SetInputStream
- InputFile
- InputMessage
When a valid source is found the search stops. The order in which the output properties are checked is as follows:
- SetOutputStream
- OutputFile
- OutputMessage: The output data is written to this property if no other destination is specified.
When using streams you may need to additionally set CloseInputStreamAfterProcessing or CloseOutputStreamAfterProcessing.
IV Property (ECC Component)
The initialization vector (IV) used when encrypting.
Syntax
property IV: String read get_IV write set_IV; property IVB: TBytes read get_IVB write set_IVB;
Default Value
''
Remarks
This property optionally specifies an IV to be used when calling Encrypt or Decrypt. If specified the IV is used by EncryptionAlgorithm during encryption.
If not specified the component will create an IV filled with null bytes (zeros). Since the encryption key is only used once the use of null bytes in the IV is considered acceptable and is a standard practice.
The length of the IV should be as follows:
EncryptionAlgorithm | IV Length (in bytes) |
AES | 16 |
3DES | 8 |
This setting is not applicable when EncryptionAlgorithm is set to XOR.
KDF Property (ECC Component)
The key derivation function used during encryption and decryption.
Syntax
property KDF: String read get_KDF write set_KDF;
Default Value
'KDF2'
Remarks
This property specifies the key derivation function (KDF) to use when encrypting and decrypting. Possible values are:
- "KDF1"
- "KDF2" (Default)
This property is only applicable when calling Encrypt or Decrypt.
KDFHashAlgorithm Property (ECC Component)
The KDF hash algorithm to use when encrypting and decrypting.
Syntax
property KDFHashAlgorithm: TipcECCKDFHashAlgorithms read get_KDFHashAlgorithm write set_KDFHashAlgorithm;
TipcECCKDFHashAlgorithms = ( iesSHA1, iesSHA224, iesSHA256, iesSHA384, iesSHA512 );
Default Value
iesSHA256
Remarks
This property specifies the hash algorithm to use in when deriving a key using the specified KDF. Possible values are:
- 0 (iesSHA1)
- 1 (iesSHA224)
- 2 (iesSHA256)
- 3 (iesSHA384)
- 4 (iesSHA512)
This property is only applicable when calling Encrypt or Decrypt.
Key Property (ECC Component)
The ECC key.
Syntax
property Key: TipcECCKey read get_Key write set_Key;
Remarks
This property specifies the ECC private key. This property must be set before calling Sign or ComputeSecret.
NIST, Koblitz, and Brainpool Curve Notes
Keys for use with NIST curves (secp256r1, secp384r1, secp521r1), Koblitz curves (secp160k1, secp192k1, secp224k1, secp256k1), and Brainpool curves are made up of a number of individual parameters.
The public key consists of the following parameters:
The private key consists of one value:
Curve25519 and Curve448 Notes
Keys for use with Curve25519 or Curve448 are made up of a private key and public key field.
XPk holds the public key.
XSk holds the private key.
Please refer to the ECCKey type for a complete list of fields.OutputFile Property (ECC Component)
The output file when encrypting or decrypting.
Syntax
property OutputFile: String read get_OutputFile write set_OutputFile;
Default Value
''
Remarks
This property specifies the file to which the output will be written when Encrypt or Decrypt is called. This may be set to an absolute or relative path.
This property is only applicable to Encrypt and Decrypt.
Input and Output Properties
The component will determine the source and destination of the input and output based on which properties are set.
The order in which the input properties are checked is as follows:
When a valid source is found the search stops. The order in which the output properties are checked is as follows:
- SetOutputStream
- OutputFile
- OutputMessage: The output data is written to this property if no other destination is specified.
When using streams you may need to additionally set CloseInputStreamAfterProcessing or CloseOutputStreamAfterProcessing.
OutputMessage Property (ECC Component)
The output message when encrypting or decrypting.
Syntax
property OutputMessage: String read get_OutputMessage; property OutputMessageB: TBytes read get_OutputMessageB;
Default Value
''
Remarks
This property will be populated with the output after calling Encrypt or Decrypt if OutputFile is not set.
This property is only applicable to Encrypt and Decrypt.
Input and Output Properties
The component will determine the source and destination of the input and output based on which properties are set.
The order in which the input properties are checked is as follows:
When a valid source is found the search stops. The order in which the output properties are checked is as follows:
- SetOutputStream
- OutputFile
- OutputMessage: The output data is written to this property if no other destination is specified.
When using streams you may need to additionally set CloseInputStreamAfterProcessing or CloseOutputStreamAfterProcessing.
This property is read-only and not available at design time.
Overwrite Property (ECC Component)
Indicates whether or not the component should overwrite files.
Syntax
property Overwrite: Boolean read get_Overwrite write set_Overwrite;
Default Value
false
Remarks
This property indicates whether or not the component will overwrite OutputFile. If Overwrite is False, an error will be thrown whenever OutputFile exists before an operation. The default value is False.
RecipientKey Property (ECC Component)
The public key used to compute the shared secret.
Syntax
property RecipientKey: TipcECCKey read get_RecipientKey write set_RecipientKey;
Remarks
This property specifies the public key used to compute the shared secret. This must be set before calling ComputeSecret.
Please refer to the ECCKey type for a complete list of fields.SharedSecret Property (ECC Component)
The computed shared secret.
Syntax
property SharedSecret: String read get_SharedSecret; property SharedSecretB: TBytes read get_SharedSecretB;
Default Value
''
Remarks
This property holds the shared secret computed by ComputeSecret.
This property is read-only.
SignerKey Property (ECC Component)
The public key used to verify the signature.
Syntax
property SignerKey: TipcECCKey read get_SignerKey write set_SignerKey;
Remarks
This property specifies the public key used to verify the signature. This public key corresponds to the private key used when creating the signature. This must be set before calling VerifySignature.
Please refer to the ECCKey type for a complete list of fields.UseHex Property (ECC Component)
Whether binary values are hex encoded.
Syntax
property UseHex: Boolean read get_UseHex write set_UseHex;
Default Value
false
Remarks
This setting specifies whether various calculated values are hex encoded. If set to False (Default) all data is provided as-is with no encoding.
If set to True certain properties are hex encoded when populated for ease of display, transport, and storage.
Compute Secret Notes
This property specifies whether SharedSecret is hex encoded when ComputeSecret is called.
Sign and Verify Notes
This property specifies whether HashValue and HashSignature are hex encoded.
If set to True, when Sign is called the component will compute the hash for the specified file and populate HashValue with the hex encoded hash value. It will then create the hash signature and populate HashSignature with the hex encoded hash signature value. If HashValue is specified directly it must be a hex encoded value.
If set to True, when VerifySignature is called the component will compute the hash value for the specified file and populate HashValue with the hex encoded hash value. It will then hex decode HashSignature and verify the signature. HashSignature must hold a hex encoded value. If HashValue is specified directly it must be a hex encoded value.
Encrypt and Decrypt Notes
If set to True, when Encrypt is called the component will perform the encryption as normal and then hex encode the output. OutputMessage or OutputFile will hold hex encoded data.
If set to True, when Decrypt is called the component will expect InputMessage or InputFile to hold hex encoded data. The component will then hex decode the data and perform decryption as normal.
ComputeSecret Method (ECC Component)
Computes a shared secret.
Syntax
procedure ComputeSecret();
Remarks
This method computes a shared secret using Elliptic Curve Diffie Hellman (ECDH).
When this method is called the component will use the public key specified by PublicKey and the private key specified by Key to compute a shared secret, or secret agreement. The ComputeSecretKDF property specifies the Hash or HMAC algorithm that is applied to the raw secret. The resulting value is held by SharedSecret. The following properties are applicable when calling this method:
- Key (required)
- PublicKey (required)
- ComputeSecretKDF (optional)
See ComputeSecretKDF for details on advanced settings that may be applicable for the chosen algorithm.
Keys created with the Ed25519 and Ed448 algorithms are not supported when calling this method.
Compute Secret Example
//Create a key for Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("X25519");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Create a key for Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("X25519");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Note: the public keys must be exchanged between parties by some mechanism
//Create the shared secret on Party 1
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv; //Private key of this party
ecc1.RecipientKey.PublicKey = ecc2_pub; //Public key of other party
ecc1.UseHex = true; //Hex encodes the shared secret bytes for easier display/storage
ecc1.ComputeSecret();
Console.WriteLine(ecc1.SharedSecret);
//Create the shared secret on Party 2
ecc2.Reset();
ecc2.Key.PrivateKey = ecc2_priv; //Private key of this party
ecc2.RecipientKey.PublicKey = ecc1_pub; //Public key of other party
ecc2.UseHex = true; //Hex encodes the shared secret bytes for easier display/storage
ecc2.ComputeSecret();
Console.WriteLine(ecc2.SharedSecret); //This will match the shared secret created by ecc1.
Config Method (ECC Component)
Sets or retrieves a configuration setting.
Syntax
function Config(ConfigurationString: String): String;
Remarks
Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
CreateKey Method (ECC Component)
Creates a new key.
Syntax
procedure CreateKey(KeyAlgorithm: String);
Remarks
CreateKey creates a new public and private key.
When this method is called Key is populated with the generated key. The PublicKey and PrivateKey property hold the PEM formatted public and private key for ease of use. This is helpful for storing or transporting keys more easily.
The KeyAlgorithm parameter specifies the algorithm for which the key is intended to be used. Possible values are:
NIST, Koblitz, and Brainpool Curve Notes
Keys for use with NIST curves (secp256r1, secp384r1, secp521r1), Koblitz curves (secp160k1, secp192k1, secp224k1, secp256k1), and Brainpool curves are made up of a number of individual parameters.
The public key consists of the following parameters:
The private key consists of one value:
Curve25519 and Curve448 Notes
Keys for use with Curve25519 or Curve448 are made up of a private key and public key field.
XPk holds the public key.
XSk holds the private key.
Create Key Example (secp256r1 - PEM)
//Create a key using secp256r1
Ecc ecc = new Ecc();
ecc.CreateKey("secp256r1");
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaSecp256r1"
string privKey = ecc.Key.PrivateKey; //PEM formatted key
string pubKey = ecc.Key.PublicKey; //PEM formatted key
//Load the saved key
ecc.Reset();
ecc.Key.PublicKey = pubKey;
ecc.Key.PrivateKey = privKey;
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaSecp256r1"
Create Key Example (secp256r1 - Raw Key Params)
//Create a key using secp256r1 and store/load the key using the individual params
Ecc ecc = new Ecc();
ecc.CreateKey("secp256r1");
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaSecp256r1"
byte[] K = ecc.Key.KB; //Private key param
byte[] Rx = ecc.Key.RxB; //Public key param
byte[] Ry = ecc.Key.RyB; //Public key param
//Load the saved key
ecc.Reset();
ecc.Key.Algorithm = ECAlgorithms.eaSecp256r1; //This MUST be set manually when using key params directly
ecc.Key.KB = K;
ecc.Key.RxB = Rx;
ecc.Key.RyB = Ry;
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaSecp256r1"
Create Key Example (Ed25519 - PEM)
//Create a key using Ed25519
Ecc ecc = new Ecc();
ecc.CreateKey("Ed25519");
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaEd25519"
string privKey = ecc.Key.PrivateKey; //PEM formatted key
string pubKey = ecc.Key.PublicKey; //PEM formatted key
//Load the saved key
ecc.Reset();
ecc.Key.PublicKey = pubKey;
ecc.Key.PrivateKey = privKey;
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaEd25519"
Create Key Example (Ed25519 - Raw Key Params)
//Create a key using Ed25519 and store/load the key using the individual params
Ecc ecc = new Ecc();
ecc.CreateKey("Ed25519");
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaEd25519"
byte[] XPk = ecc.Key.XPkB; //Public key data
byte[] XSk = ecc.Key.XSkB; //Secret key data
//Load the saved key
ecc.Reset();
ecc.Key.Algorithm = ECAlgorithms.eaEd25519; //This MUST be set manually when using key params directly
ecc.Key.XPkB = XPk;
ecc.Key.XSkB = XSk;
Console.WriteLine(ecc.Key.Algorithm); //outputs enum value "eaEd25519"
Decrypt Method (ECC Component)
Decrypted the specified data.
Syntax
procedure Decrypt();
Remarks
Decrypt decrypts the specified data with the ECDSA private key specified in Key.
Decryption is performed using ECIES which requires an ECDSA key. Key must contain an ECDSA key. Algorithm is used to determine the eligibility of the key for this operation. Supported algorithms for encryption are:
- NIST Curves (secp256r1, secp384r1, secp521r1)
- Koblitz Curves (secp160k1, secp192k1, secp224k1, secp256k1)
- Brainpool Curves
See CreateKey for details about key creation and algorithms.
When this method is called the component will decrypt the specified data using ECIES and the decrypted data will be output. If the input data was originally hex encoded, set UseHex to True.
The following properties are applicable when calling this method:
- EncryptionAlgorithm
- HMACAlgorithm
- HMACOptionalInfo
- HMACKeySize
- IV
- KDF
- KDFHashAlgorithm
- KDFOptionalInfo
- UseHex
Input and Output Properties
The component will determine the source and destination of the input and output based on which properties are set.
The order in which the input properties are checked is as follows:
When a valid source is found the search stops. The order in which the output properties are checked is as follows:
- SetOutputStream
- OutputFile
- OutputMessage: The output data is written to this property if no other destination is specified.
When using streams you may need to additionally set CloseInputStreamAfterProcessing or CloseOutputStreamAfterProcessing.
Encrypt and Decrypt Example
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message to Party 2
//Decrypt the message using the private key for Party 2
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt and Decrypt Example (AES with IV)
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
//Use an IV (16 bytes for AES) - In a real environment this should be random
byte[] IV = new byte[] { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F };
ecc1.EncryptionAlgorithm = EccEncryptionAlgorithms.iesAES;
ecc1.IVB = IV;
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message and the IV to Party 2
//Decrypt the message using the private key for Party 2 and the IV
ecc2.EncryptionAlgorithm = EccEncryptionAlgorithms.iesAES;
ecc2.IVB = IV;
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt and Decrypt Example (XOR Encryption Algorithm)
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
ecc1.EncryptionAlgorithm = EccEncryptionAlgorithms.iesXOR;
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message to Party 2
//Decrypt the message using the private key for Party 2
ecc2.EncryptionAlgorithm = EccEncryptionAlgorithms.iesXOR;
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt and Decrypt Example (KDF Options)
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
ecc1.KDF = "KDF1"; //Use KDF1
ecc1.KDFHashAlgorithm = EccKDFHashAlgorithms.iesSHA1;
ecc1.Config("KDFOptionalInfo=202122232425262728292a2b2c2d2e2f"); //Hex encoded string
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message to Party 2
//Decrypt the message using the private key for Party 2
ecc2.KDF = "KDF1";
ecc2.KDFHashAlgorithm = EccKDFHashAlgorithms.iesSHA1;
ecc2.Config("KDFOptionalInfo=202122232425262728292a2b2c2d2e2f");
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt Method (ECC Component)
Encrypts the specified data.
Syntax
procedure Encrypt();
Remarks
Encrypt encrypts the specified data with the ECDSA public key specified in RecipientKey.
Encryption is performed using ECIES which requires an ECDSA key. RecipientKey must contain an ECDSA key. Algorithm is used to determine the eligibility of the key for this operation. Supported algorithms for encryption are:
- NIST Curves (secp256r1, secp384r1, secp521r1)
- Koblitz Curves (secp160k1, secp192k1, secp224k1, secp256k1)
- Brainpool Curves
See CreateKey for details about key creation and algorithms.
When this method is called the component will encrypt the specified data using ECIES and the encrypted data will be output. To hex encode the output set UseHex to True.
The following properties are applicable when calling this method:
- EncryptionAlgorithm
- HMACAlgorithm
- HMACOptionalInfo
- HMACKeySize
- IV
- KDF
- KDFHashAlgorithm
- KDFOptionalInfo
- UseHex
Input and Output Properties
The component will determine the source and destination of the input and output based on which properties are set.
The order in which the input properties are checked is as follows:
When a valid source is found the search stops. The order in which the output properties are checked is as follows:
- SetOutputStream
- OutputFile
- OutputMessage: The output data is written to this property if no other destination is specified.
When using streams you may need to additionally set CloseInputStreamAfterProcessing or CloseOutputStreamAfterProcessing.
Encrypt and Decrypt Example
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message to Party 2
//Decrypt the message using the private key for Party 2
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt and Decrypt Example (AES with IV)
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
//Use an IV (16 bytes for AES) - In a real environment this should be random
byte[] IV = new byte[] { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F };
ecc1.EncryptionAlgorithm = EccEncryptionAlgorithms.iesAES;
ecc1.IVB = IV;
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message and the IV to Party 2
//Decrypt the message using the private key for Party 2 and the IV
ecc2.EncryptionAlgorithm = EccEncryptionAlgorithms.iesAES;
ecc2.IVB = IV;
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt and Decrypt Example (XOR Encryption Algorithm)
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
ecc1.EncryptionAlgorithm = EccEncryptionAlgorithms.iesXOR;
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message to Party 2
//Decrypt the message using the private key for Party 2
ecc2.EncryptionAlgorithm = EccEncryptionAlgorithms.iesXOR;
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Encrypt and Decrypt Example (KDF Options)
//Create an ECDSA key on Party 2
Ecc ecc2 = new Ecc();
ecc2.CreateKey("secp256r1");
string ecc2_priv = ecc2.Key.PrivateKey;
string ecc2_pub = ecc2.Key.PublicKey;
//Transmit public key to Party 1
//Encrypt the message on Party 1 using public key from Party 2
Ecc ecc1 = new Ecc();
ecc1.KDF = "KDF1"; //Use KDF1
ecc1.KDFHashAlgorithm = EccKDFHashAlgorithms.iesSHA1;
ecc1.Config("KDFOptionalInfo=202122232425262728292a2b2c2d2e2f"); //Hex encoded string
ecc1.InputMessage = "hello ecc";
ecc1.RecipientKey.PublicKey = ecc2_pub;
ecc1.UseHex = true;
ecc1.Encrypt();
string encryptedMessage = ecc1.OutputMessage;
//Transmit the encrypted message to Party 2
//Decrypt the message using the private key for Party 2
ecc2.KDF = "KDF1";
ecc2.KDFHashAlgorithm = EccKDFHashAlgorithms.iesSHA1;
ecc2.Config("KDFOptionalInfo=202122232425262728292a2b2c2d2e2f");
ecc2.Key.PrivateKey = ecc2_priv;
ecc2.InputMessage = encryptedMessage;
ecc2.UseHex = true;
ecc2.Decrypt();
Console.WriteLine(ecc2.OutputMessage);
Reset Method (ECC Component)
Resets the component.
Syntax
procedure Reset();
Remarks
When called, the component will reset all of its properties to their default values.
SetInputStream Method (ECC Component)
Sets the stream from which the component will read data to encrypt or decrypt.
Syntax
procedure SetInputStream(InputStream: TStream);
Remarks
This method sets the stream from which the component will read data to encrypt or decrypt.
Input and Output Properties
The component will determine the source and destination of the input and output based on which properties are set.
The order in which the input properties are checked is as follows:
- SetInputStream
- InputFile
- InputMessage
When a valid source is found the search stops. The order in which the output properties are checked is as follows:
- SetOutputStream
- OutputFile
- OutputMessage: The output data is written to this property if no other destination is specified.
When using streams you may need to additionally set CloseInputStreamAfterProcessing or CloseOutputStreamAfterProcessing.
SetOutputStream Method (ECC Component)
Sets the stream to which the component will write encrypted or decrypted data.
Syntax
procedure SetOutputStream(OutputStream: TStream);
Remarks
This method sets the stream to which the component will write encrypted or decrypted data.
Input and Output Properties
The component will determine the source and destination of the input and output based on which properties are set.
The order in which the input properties are checked is as follows:
When a valid source is found the search stops. The order in which the output properties are checked is as follows:
- SetOutputStream
- OutputFile
- OutputMessage: The output data is written to this property if no other destination is specified.
When using streams you may need to additionally set CloseInputStreamAfterProcessing or CloseOutputStreamAfterProcessing.
Sign Method (ECC Component)
Creates a hash signature using ECDSA or EdDSA.
Syntax
procedure Sign();
Remarks
Sign will create a hash signature using ECDSA or EdDSA. The component will use the key specified by Key to has the input data and sign the resulting hash.
Key must contain a private key created with a valid ECDSA or EdDSA algorithm. Algorithm is used to determine the eligibility of the key for this operation. Supported algorithms for signing are:
- NIST Curves (secp256r1, secp384r1, secp521r1)
- Koblitz Curves (secp160k1, secp192k1, secp224k1, secp256k1)
- Brainpool Curves
- Ed25519 and Ed448
See CreateKey for details about key creation and algorithms.
When this method is called data will be read from the InputFile or InputMessage.
The hash to be signed will be computed using the specified HashAlgorithm. The computed hash is stored in the HashValue property. The signed hash is stored in the HashSignature property.
To sign as hash without first computing it set HashValue to a previously computed hash for the input data. Note: HashValue is not applicable when signing with a PureEdDSA algorithm such as "Ed25519" or "Ed448".
The Progress event will fire with updates for the hash computation progress only. The hash signature creation process is quick and does not require progress updates.
After calling Sign the public key must be sent to the recipient along with HashSignature and original input data so the other party may perform signature verification.
The following properties are applicable when calling this method:
- Key (required)
- HashAlgorithm (applicable to ECDSA only)
- HashEdDSA (applicable to EdDSA only)
- HashValue (not applicable to PureEdDSA)
- UseHex
The following properties are populated after calling this method:
EdDSA Notes
When the Algorithm is Ed25519 or Ed448 the following additional parameters are applicable:
EdDSA keys can be used with a PureEdDSA algorithm (Ed25519/Ed448) or as HashEdDSA (Ed25519ph, Ed448ph) algorithm. This is controlled by the HashEdDSA property. By default the component uses the PureEdDSA algorithm.
The PureEdDSA algorithm requires two passes over the input data but provides collision resilience. The collision resilience of PureEdDSA means even if it is feasible to compute collisions for the hash function, the algorithm is still secure. When using PureEdDSA HashValue is not applicable.
When using a HashEdDSA algorithm the input is pre-hashed and supports a single pass over the data during the signing operation. To enable HashEdDSA set HashEdDSA to True.
To specify context data when using Ed25519 or Ed448 set EdDSAContext.
Sign And Verify Example (ECDSA)
//Create an ECDSA key on Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("secp256r1");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Sign the data on Party 1
string originalData = "hello ecc";
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv;
ecc1.InputMessage = originalData;
ecc1.UseHex = true; //Hex encode the hash signature for ease of use.
ecc1.Sign();
string hashSignature = ecc1.HashSignature;
//Transmit the hash signature, public key, and original data to part 2
//Verify the data on Party 2
Ecc ecc2 = new Ecc();
ecc2.SignerKey.PublicKey = ecc1_pub;
ecc2.InputMessage = originalData;
ecc2.HashSignature = hashSignature;
ecc2.UseHex = true; //Decode the hex encoded hash signature
bool isVerified = ecc2.VerifySignature();
Sign And Verify Example (EdDSA - PureEdDSA)
//Create an EdDSA key on Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("ed25519");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Sign the data on Party 1
string originalData = "hello ecc";
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv;
ecc1.InputMessage = originalData;
ecc1.UseHex = true; //Hex encode the hash signature for ease of use.
ecc1.Sign();
string hashSignature = ecc1.HashSignature;
//Transmit the hash signature, public key, and original data to part 2
//Verify the data on Party 2
Ecc ecc2 = new Ecc();
ecc2.SignerKey.PublicKey = ecc1_pub;
ecc2.InputMessage = originalData;
ecc2.HashSignature = hashSignature;
ecc2.UseHex = true; //Decode the hex encoded hash signature
bool isVerified = ecc2.VerifySignature();
Sign And Verify Example (EdDSA - HashEdDSA)
//Create an EdDSA key on Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("ed25519");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Sign the data on Party 1
string originalData = "hello ecc";
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv;
ecc1.InputMessage = originalData;
ecc1.UseHex = true; //Hex encode the hash signature for ease of use.
ecc1.HashEdDSA = true; //Use "ed25519ph"
ecc1.Sign();
string hashSignature = ecc1.HashSignature;
//Transmit the hash signature, public key, and original data to part 2
//Verify the data on Party 2
Ecc ecc2 = new Ecc();
ecc2.SignerKey.PublicKey = ecc1_pub;
ecc2.InputMessage = originalData;
ecc2.HashSignature = hashSignature;
ecc2.HashEdDSA = true;
ecc2.UseHex = true; //Decode the hex encoded hash signature
bool isVerified = ecc2.VerifySignature();
VerifySignature Method (ECC Component)
Verifies the signature for the specified data.
Syntax
function VerifySignature(): Boolean;
Remarks
VerifySignature will verify a hash signature and return True if successful or False otherwise.
Before calling this method specify the input file by setting InputFile or InputMessage.
A public key and the hash signature are required to perform the signature verification. Specify the public key in SignerKey. Specify the hash signature in HashSignature.
When this method is called the component will compute the hash for the specified file and populate HashValue. It will verify the signature using the specified SignerKey and HashSignature.
To verify the hash signature without first computing the hash simply specify HashValue before calling this method. Note: HashValue is not applicable when the message was signed with a PureEdDSA algorithm such as Ed25519 or Ed448.
The Progress event will fire with updates for the hash computation progress only. The hash signature verification process is quick and does not require progress updates.
The following properties are applicable when calling this method:
- HashSignature (required)
- SignerKey (required)
- EdDSAContext (applicable to EdDSA only)
- HashAlgorithm (applicable to ECDSA only)
- HashEdDSA (applicable to EdDSA only)
- HashValue (not applicable to PureEdDSA)
- UseHex
Sign And Verify Example (ECDSA)
//Create an ECDSA key on Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("secp256r1");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Sign the data on Party 1
string originalData = "hello ecc";
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv;
ecc1.InputMessage = originalData;
ecc1.UseHex = true; //Hex encode the hash signature for ease of use.
ecc1.Sign();
string hashSignature = ecc1.HashSignature;
//Transmit the hash signature, public key, and original data to part 2
//Verify the data on Party 2
Ecc ecc2 = new Ecc();
ecc2.SignerKey.PublicKey = ecc1_pub;
ecc2.InputMessage = originalData;
ecc2.HashSignature = hashSignature;
ecc2.UseHex = true; //Decode the hex encoded hash signature
bool isVerified = ecc2.VerifySignature();
Sign And Verify Example (EdDSA - PureEdDSA)
//Create an EdDSA key on Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("ed25519");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Sign the data on Party 1
string originalData = "hello ecc";
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv;
ecc1.InputMessage = originalData;
ecc1.UseHex = true; //Hex encode the hash signature for ease of use.
ecc1.Sign();
string hashSignature = ecc1.HashSignature;
//Transmit the hash signature, public key, and original data to part 2
//Verify the data on Party 2
Ecc ecc2 = new Ecc();
ecc2.SignerKey.PublicKey = ecc1_pub;
ecc2.InputMessage = originalData;
ecc2.HashSignature = hashSignature;
ecc2.UseHex = true; //Decode the hex encoded hash signature
bool isVerified = ecc2.VerifySignature();
Sign And Verify Example (EdDSA - HashEdDSA)
//Create an EdDSA key on Party 1
Ecc ecc1 = new Ecc();
ecc1.CreateKey("ed25519");
string ecc1_priv = ecc1.Key.PrivateKey;
string ecc1_pub = ecc1.Key.PublicKey;
//Sign the data on Party 1
string originalData = "hello ecc";
ecc1.Reset();
ecc1.Key.PrivateKey = ecc1_priv;
ecc1.InputMessage = originalData;
ecc1.UseHex = true; //Hex encode the hash signature for ease of use.
ecc1.HashEdDSA = true; //Use "ed25519ph"
ecc1.Sign();
string hashSignature = ecc1.HashSignature;
//Transmit the hash signature, public key, and original data to part 2
//Verify the data on Party 2
Ecc ecc2 = new Ecc();
ecc2.SignerKey.PublicKey = ecc1_pub;
ecc2.InputMessage = originalData;
ecc2.HashSignature = hashSignature;
ecc2.HashEdDSA = true;
ecc2.UseHex = true; //Decode the hex encoded hash signature
bool isVerified = ecc2.VerifySignature();
Error Event (ECC Component)
Fired when information is available about errors during data delivery.
Syntax
type TErrorEvent = procedure ( Sender: TObject; ErrorCode: Integer; const Description: String ) of Object;
property OnError: TErrorEvent read FOnError write FOnError;
Remarks
The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.
The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.
Progress Event (ECC Component)
Fired as progress is made.
Syntax
type TProgressEvent = procedure ( Sender: TObject; BytesProcessed: Int64; PercentProcessed: Integer ) of Object;
property OnProgress: TProgressEvent read FOnProgress write FOnProgress;
Remarks
This event is fired automatically as data is processed by the component.
The PercentProcessed parameter indicates the current status of the operation.
The BytesProcessed parameter holds the total number of bytes processed so far.
ECCKey Type
Contains the parameters for the ECC algorithm.
Remarks
This type is made up of fields that represent the private and public key parameters used by the ECC operations. The PrivateKey and PublicKey parameters hold a PEM formatted value for easy transport and storage of keys.
NIST, Koblitz, and Brainpool Curve Notes
Keys for use with NIST curves (secp256r1, secp384r1, secp521r1), Koblitz curves (secp160k1, secp192k1, secp224k1, secp256k1), and Brainpool curves are made up of a number of individual parameters.
The public key consists of the following parameters:
The private key consists of one value:
Curve25519 and Curve448 Notes
Keys for use with Curve25519 or Curve448 are made up of a private key and public key field.
XPk holds the public key.
XSk holds the private key.
Fields
Algorithm
TipcECAlgorithms
Default Value: 0
This property holds the algorithm associated with the key. Possible values are:
- 0 (eaSecp256r1)
- 1 (eaSecp384r1)
- 2 (eaSecp521r1)
- 3 (eaEd25519)
- 4 (eaEd448)
- 5 (eaX25519)
- 6 (eaX448)
- 7 (eaSecp160k1)
- 8 (eaSecp192k1)
- 9 (eaSecp224k1)
- 10 (eaSecp256k1)
- 11 (eaBrainpoolP160r1)
- 12 (eaBrainpoolP192r1)
- 13 (eaBrainpoolP224r1)
- 14 (eaBrainpoolP256r1)
- 15 (eaBrainpoolP320r1)
- 16 (eaBrainpoolP384r1)
- 17 (eaBrainpoolP512r1)
- 18 (eaBrainpoolP160t1)
- 19 (eaBrainpoolP192t1)
- 20 (eaBrainpoolP224t1)
- 21 (eaBrainpoolP256t1)
- 22 (eaBrainpoolP320t1)
- 23 (eaBrainpoolP384t1)
- 24 (eaBrainpoolP512t1)
When assigning a key using the PEM formatted PrivateKey and PublicKey the Algorithm property will be automatically updated with the key algorithm.
When assigning a key using the raw key parameters (K, Rx, and Ry for NIST or XPk, and XSk for Curve25519/Curve448) the Algorithm property must be set manually to the key algorithm.
The following table summarizes the supported operations for keys created with each algorithm:
KeyAlgorithm | Supported Operations |
secp256r1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
secp384r1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
secp521r1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
X25519 | ECDH (ComputeSecret) |
X448 | ECDH (ComputeSecret) |
Ed25519 | EdDSA (Sign and VerifySignature) |
Ed448 | EdDSA (Sign and VerifySignature) |
secp160k1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
secp192k1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
secp224k1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
secp256k1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP160r1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP192r1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP224r1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP256r1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP320r1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP384r1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP512r1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP160t1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP192t1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP224t1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP256t1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP320t1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP384t1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
brainpoolP512t1 | ECDH/ECIES/ECDSA (ComputeSecret, Encrypt, Decrypt, Sign, and VerifySignature) |
K
String
Default Value: ""
Represent the private key (K) parameter.
Note: This value is only applicable when using an NIST, Koblitz, or Brainpool curve.
KB
TBytes
Default Value: ""
Represent the private key (K) parameter.
Note: This value is only applicable when using an NIST, Koblitz, or Brainpool curve.
PrivateKey
String
Default Value: ""
This property is a PEM formatted private key. The purpose of this property is to allow easier management of the private key parameters by using only a single value.
PublicKey
String
Default Value: ""
This property is a PEM formatted public key. The purpose of this property is to allow easier management of the public key parameters by using only a single value.
Rx
String
Default Value: ""
Represents the public key's Rx parameter.
Note: This value is only applicable when using an NIST, Koblitz, or Brainpool curve.
RxB
TBytes
Default Value: ""
Represents the public key's Rx parameter.
Note: This value is only applicable when using an NIST, Koblitz, or Brainpool curve.
Ry
String
Default Value: ""
Represents the public key's Ry parameter.
Note: This value is only applicable when using an NIST, Koblitz, or Brainpool curve.
RyB
TBytes
Default Value: ""
Represents the public key's Ry parameter.
Note: This value is only applicable when using an NIST, Koblitz, or Brainpool curve.
XPk
String
Default Value: ""
Holds the public key data.
Note: This value is only applicable when using Curve25519 or Curve448.
XPkB
TBytes
Default Value: ""
Holds the public key data.
Note: This value is only applicable when using Curve25519 or Curve448.
XSk
String
Default Value: ""
Holds the private key data.
Note: This value is only applicable when using Curve25519 or Curve448.
XSkB
TBytes
Default Value: ""
Holds the private key data.
Note: This value is only applicable when using Curve25519 or Curve448.
Constructors
>
constructor Create();
The default constructor creates a new ECCKey instance but does not assign a public or private key.
Config Settings (ECC Component)
The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.ECC Config Settings
Note: This is not applicable when ComputeSecretKDF is set to 12 (ekdTLS).
This setting is required when ComputeSecretKDF is set to ekdConcat. This setting is only applicable when calling ComputeSecret.
- SHA1
- SHA224
- SHA256 (default)
- SHA384
- SHA512
- RIPEMD160
This setting is required when ComputeSecretKDF is set to ekdConcat. This setting is only applicable when calling ComputeSecret.
This setting is required when ComputeSecretKDF is set to ekdConcat. This setting is only applicable when calling ComputeSecret.
This setting is optional when ComputeSecretKDF is set to ekdConcat. This setting is only applicable when calling ComputeSecret.
This setting is optional when ComputeSecretKDF is set to ekdConcat. This setting is only applicable when calling ComputeSecret.
- 0 (Concatenated - default)
- 1 (ASN)
Note: This setting is only applicable when Algorithm is set to an NIST, Koblitz, or Brainpool curve.
This setting is only applicable when Algorithm is set to Ed25519 or Ed448. When this setting is specified and the Algorithm is Ed25519 and HashEdDSA is False the component will automatically use Ed25519ctx.
If this value is specified before calling Sign, it must also be set prior to calling VerifySignature.
- 128
- 192
- 256 (default)
This is only applicable when calling ComputeSecret.
This setting is only applicable when calling Encrypt or Decrypt.
The value specified in this setting must a hex string.
If specified this must be set before calling both Encrypt and Decrypt.
The value specified in this setting must a hex string.
If specified this must be set before calling both Encrypt and Decrypt.
Note: This is not applicable when ComputeSecretKDF is set to 12 (ekdTLS).
When using keys with the algorithm Ed25519, Ed448, X25519, or X448 the component will calculate the public key based on the provided private key and compare it to the provided public key to ensure they match.
When using keys with an NIST, Koblitz, or Brainpool curve, the component will perform calculations to verify the public key is a point on the curve. The component will also calculate the public key based on the provided private key and compare it to the provided public key to ensure they match.
The default value is False and the component will use the public and private keys as provided without any additional checks.
Base Config Settings
The following is a list of valid code page identifiers:
Identifier | Name |
037 | IBM EBCDIC - U.S./Canada |
437 | OEM - United States |
500 | IBM EBCDIC - International |
708 | Arabic - ASMO 708 |
709 | Arabic - ASMO 449+, BCON V4 |
710 | Arabic - Transparent Arabic |
720 | Arabic - Transparent ASMO |
737 | OEM - Greek (formerly 437G) |
775 | OEM - Baltic |
850 | OEM - Multilingual Latin I |
852 | OEM - Latin II |
855 | OEM - Cyrillic (primarily Russian) |
857 | OEM - Turkish |
858 | OEM - Multilingual Latin I + Euro symbol |
860 | OEM - Portuguese |
861 | OEM - Icelandic |
862 | OEM - Hebrew |
863 | OEM - Canadian-French |
864 | OEM - Arabic |
865 | OEM - Nordic |
866 | OEM - Russian |
869 | OEM - Modern Greek |
870 | IBM EBCDIC - Multilingual/ROECE (Latin-2) |
874 | ANSI/OEM - Thai (same as 28605, ISO 8859-15) |
875 | IBM EBCDIC - Modern Greek |
932 | ANSI/OEM - Japanese, Shift-JIS |
936 | ANSI/OEM - Simplified Chinese (PRC, Singapore) |
949 | ANSI/OEM - Korean (Unified Hangul Code) |
950 | ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) |
1026 | IBM EBCDIC - Turkish (Latin-5) |
1047 | IBM EBCDIC - Latin 1/Open System |
1140 | IBM EBCDIC - U.S./Canada (037 + Euro symbol) |
1141 | IBM EBCDIC - Germany (20273 + Euro symbol) |
1142 | IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) |
1143 | IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) |
1144 | IBM EBCDIC - Italy (20280 + Euro symbol) |
1145 | IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) |
1146 | IBM EBCDIC - United Kingdom (20285 + Euro symbol) |
1147 | IBM EBCDIC - France (20297 + Euro symbol) |
1148 | IBM EBCDIC - International (500 + Euro symbol) |
1149 | IBM EBCDIC - Icelandic (20871 + Euro symbol) |
1200 | Unicode UCS-2 Little-Endian (BMP of ISO 10646) |
1201 | Unicode UCS-2 Big-Endian |
1250 | ANSI - Central European |
1251 | ANSI - Cyrillic |
1252 | ANSI - Latin I |
1253 | ANSI - Greek |
1254 | ANSI - Turkish |
1255 | ANSI - Hebrew |
1256 | ANSI - Arabic |
1257 | ANSI - Baltic |
1258 | ANSI/OEM - Vietnamese |
1361 | Korean (Johab) |
10000 | MAC - Roman |
10001 | MAC - Japanese |
10002 | MAC - Traditional Chinese (Big5) |
10003 | MAC - Korean |
10004 | MAC - Arabic |
10005 | MAC - Hebrew |
10006 | MAC - Greek I |
10007 | MAC - Cyrillic |
10008 | MAC - Simplified Chinese (GB 2312) |
10010 | MAC - Romania |
10017 | MAC - Ukraine |
10021 | MAC - Thai |
10029 | MAC - Latin II |
10079 | MAC - Icelandic |
10081 | MAC - Turkish |
10082 | MAC - Croatia |
12000 | Unicode UCS-4 Little-Endian |
12001 | Unicode UCS-4 Big-Endian |
20000 | CNS - Taiwan |
20001 | TCA - Taiwan |
20002 | Eten - Taiwan |
20003 | IBM5550 - Taiwan |
20004 | TeleText - Taiwan |
20005 | Wang - Taiwan |
20105 | IA5 IRV International Alphabet No. 5 (7-bit) |
20106 | IA5 German (7-bit) |
20107 | IA5 Swedish (7-bit) |
20108 | IA5 Norwegian (7-bit) |
20127 | US-ASCII (7-bit) |
20261 | T.61 |
20269 | ISO 6937 Non-Spacing Accent |
20273 | IBM EBCDIC - Germany |
20277 | IBM EBCDIC - Denmark/Norway |
20278 | IBM EBCDIC - Finland/Sweden |
20280 | IBM EBCDIC - Italy |
20284 | IBM EBCDIC - Latin America/Spain |
20285 | IBM EBCDIC - United Kingdom |
20290 | IBM EBCDIC - Japanese Katakana Extended |
20297 | IBM EBCDIC - France |
20420 | IBM EBCDIC - Arabic |
20423 | IBM EBCDIC - Greek |
20424 | IBM EBCDIC - Hebrew |
20833 | IBM EBCDIC - Korean Extended |
20838 | IBM EBCDIC - Thai |
20866 | Russian - KOI8-R |
20871 | IBM EBCDIC - Icelandic |
20880 | IBM EBCDIC - Cyrillic (Russian) |
20905 | IBM EBCDIC - Turkish |
20924 | IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) |
20932 | JIS X 0208-1990 & 0121-1990 |
20936 | Simplified Chinese (GB2312) |
21025 | IBM EBCDIC - Cyrillic (Serbian, Bulgarian) |
21027 | Extended Alpha Lowercase |
21866 | Ukrainian (KOI8-U) |
28591 | ISO 8859-1 Latin I |
28592 | ISO 8859-2 Central Europe |
28593 | ISO 8859-3 Latin 3 |
28594 | ISO 8859-4 Baltic |
28595 | ISO 8859-5 Cyrillic |
28596 | ISO 8859-6 Arabic |
28597 | ISO 8859-7 Greek |
28598 | ISO 8859-8 Hebrew |
28599 | ISO 8859-9 Latin 5 |
28605 | ISO 8859-15 Latin 9 |
29001 | Europa 3 |
38598 | ISO 8859-8 Hebrew |
50220 | ISO 2022 Japanese with no halfwidth Katakana |
50221 | ISO 2022 Japanese with halfwidth Katakana |
50222 | ISO 2022 Japanese JIS X 0201-1989 |
50225 | ISO 2022 Korean |
50227 | ISO 2022 Simplified Chinese |
50229 | ISO 2022 Traditional Chinese |
50930 | Japanese (Katakana) Extended |
50931 | US/Canada and Japanese |
50933 | Korean Extended and Korean |
50935 | Simplified Chinese Extended and Simplified Chinese |
50936 | Simplified Chinese |
50937 | US/Canada and Traditional Chinese |
50939 | Japanese (Latin) Extended and Japanese |
51932 | EUC - Japanese |
51936 | EUC - Simplified Chinese |
51949 | EUC - Korean |
51950 | EUC - Traditional Chinese |
52936 | HZ-GB2312 Simplified Chinese |
54936 | Windows XP: GB18030 Simplified Chinese (4 Byte) |
57002 | ISCII Devanagari |
57003 | ISCII Bengali |
57004 | ISCII Tamil |
57005 | ISCII Telugu |
57006 | ISCII Assamese |
57007 | ISCII Oriya |
57008 | ISCII Kannada |
57009 | ISCII Malayalam |
57010 | ISCII Gujarati |
57011 | ISCII Punjabi |
65000 | Unicode UTF-7 |
65001 | Unicode UTF-8 |
Identifier | Name |
1 | ASCII |
2 | NEXTSTEP |
3 | JapaneseEUC |
4 | UTF8 |
5 | ISOLatin1 |
6 | Symbol |
7 | NonLossyASCII |
8 | ShiftJIS |
9 | ISOLatin2 |
10 | Unicode |
11 | WindowsCP1251 |
12 | WindowsCP1252 |
13 | WindowsCP1253 |
14 | WindowsCP1254 |
15 | WindowsCP1250 |
21 | ISO2022JP |
30 | MacOSRoman |
10 | UTF16String |
0x90000100 | UTF16BigEndian |
0x94000100 | UTF16LittleEndian |
0x8c000100 | UTF32String |
0x98000100 | UTF32BigEndian |
0x9c000100 | UTF32LittleEndian |
65536 | Proprietary |
- Product: The product the license is for.
- Product Key: The key the license was generated from.
- License Source: Where the license was found (e.g., RuntimeLicense, License File).
- License Type: The type of license installed (e.g., Royalty Free, Single Server).
- Last Valid Build: The last valid build number for which the license will work.
This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.
Setting this configuration setting to True tells the component to use the internal implementation instead of using the system security libraries.
This setting is set to False by default on all platforms.
Trappable Errors (ECC Component)
ECC Errors
102 No Key specified. | |
104 Cannot read or write file. | |
111 OutputFile already exists and Overwrite is False. | |
120 Invalid curve. | |
124 HashSignature must be specified. | |
304 Cannot write file. | |
305 Cannot read file. | |
306 Cannot create file. | |
1401 Specified ECC parameters are invalid. | |
1402 Missing hash value. | |
1403 Public key must be specified. | |
1404 Key must be specified. | |
1405 HashSignature must be specified. | |
1406 Invalid key size. | |
1407 Invalid TLS seed. TLSSeed must be 64 bytes long. | |
1408 Invalid TLS label. | |
1409 Unsupported key format. | |
1410 Unsupported curve. |