PPOP Control

Properties   Methods   Events   Config Settings   Errors  

The PPOP control is used retrieve and process OpenPGP encrypted and/or signed messages from Internet Post Office servers (POP).

Syntax

PPOP

Remarks

The PPOP control implements a standard internet post office (POP3) client, as specified in RFC 1725, and supports decrypting and verifying signatures of encrypted and signed emails using OpenPGP. You can send an OpenPGP signed and encrypted message using the PSMTP control by calling the Encrypt, Sign, and SignAndEncrypt methods.

Connect to the Server

To connect to a MailServer, first set the appropriate User and Password and then connect by calling the Connect method. Upon successful connection to the MailServer, the number of waiting messages is shown by the MessageCount property. A message is selected by setting the MessageNumber property to a number between 1 and MessageCount (inclusive). Then, the message text and/or headers are received by calling the Retrieve method.

Receive Messages

The message text is received through the Transfer event, whereas the message headers are received through the Header event. Additionally, up to MaxLines from the message body are provided in the MessageText property. The StartTransfer and EndTransfer events are fired at the beginning and end of message transmission. The PITrail event provides a trace of the interaction between the client and server (excluding message transfers).

Verify

To verify the signature of a message specify the public key to be used for signature verification by setting the SignerKey* properties. For instance: PPOP1.SignerKeyCount = 1 PPOP1.SignerKeyKeyring(0) = "c:\my_keyring_dir" PPOP1.SignerKeyUserId(0) = "sender@nsoftware.com" The specified public key will be used to verify the signature when calling VerifySignature.

Decrypt

To process an encrypted or signed message first retrieve the message text and headers by calling Retrieve. To decrypt a message specify the private key to be used for decryption by setting the Key* properties. For instance: PPOP1.KeyCount = 1 PPOP1.KeyKeyring(0) = "c:\my_keyring_dir" PPOP1.KeyUserId(0) = "recipient@nsoftware.com" PPOP1.KeyPassphrase(0) = "password" The specified private key will be used to decrypt the message when calling Decrypt.

Decrypt and Verify

To decrypt and verify in one step, you can call DecryptAndVerifySignature. Set the public key of the sender in the and the private key to be used for decryption in the Key* properties .

Property List

The following is the full list of the properties of the control with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the control with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the control with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the control with short descriptions. Click on the links for further details.

AuthMechanism Property (PPOP Control)

This property includes the authentication mechanism to be used when connecting to the mail server.

Syntax

ppopcontrol.AuthMechanism[=integer]

Possible Values

amUserPassword(0), 
amCRAMMD5(1), 
amNTLM(2), 
amAPOP(3), 
amSASLPlain(4), 
amSASLDigestMD5(5), 
amKerberos(6), 
amXOAUTH2(7)

Default Value

0

Remarks

This property is used as the authentication mechanism when connecting to the mail server. By default, this property is amUserPassword (0), and default plaintext authentication is used to log in to the server. Other, more secure, options include amCRAMMD5 (1) for CRAM-MD5, amNTLM (2) for NTLM authentication, amAPOP (3) for APOP authentication, and amSASLDigestMD5 (5) for SASL DIGEST-MD5 authentication.

amSASLPlain (4) is also available, but most servers require a Secure Sockets Layer (SSL) connection when utilizing this authentication mechanism.

amKerberos (6) is for Kerberos authentication. Note: This functionality is available only in Windows.

Data Type

Integer

Connected Property (PPOP Control)

Whether the control is connected.

Syntax

ppopcontrol.Connected

Default Value

False

Remarks

This property is used to determine whether or not the control is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.

This property is read-only and not available at design time.

Data Type

Boolean

FirewallAutoDetect Property (PPOP Control)

Whether to automatically detect and use firewall system settings, if available.

Syntax

ppopcontrol.FirewallAutoDetect[=boolean]

Default Value

False

Remarks

Whether to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (PPOP Control)

The type of firewall to connect through.

Syntax

ppopcontrol.FirewallType[=integer]

Possible Values

fwNone(0), 
fwTunnel(1), 
fwSOCKS4(2), 
fwSOCKS5(3), 
fwSOCKS4A(10)

Default Value

0

Remarks

The type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (PPOP Control)

The name or IP address of the firewall (optional).

Syntax

ppopcontrol.FirewallHost[=string]

Default Value

""

Remarks

The name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the control fails with an error.

Data Type

String

FirewallPassword Property (PPOP Control)

A password if authentication is to be used when connecting through the firewall.

Syntax

ppopcontrol.FirewallPassword[=string]

Default Value

""

Remarks

A password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the control fails with an error.

Data Type

String

FirewallPort Property (PPOP Control)

The Transmission Control Protocol (TCP) port for the firewall Host .

Syntax

ppopcontrol.FirewallPort[=integer]

Default Value

0

Remarks

The Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (PPOP Control)

A username if authentication is to be used when connecting through a firewall.

Syntax

ppopcontrol.FirewallUser[=string]

Default Value

""

Remarks

A username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the control fails with an error.

Data Type

String

Idle Property (PPOP Control)

The current status of the control.

Syntax

ppopcontrol.Idle

Default Value

True

Remarks

This property will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.

This property is read-only.

Data Type

Boolean

IncludeHeaders Property (PPOP Control)

This property instructs the control to include the headers in the MessageText and LocalFile.

Syntax

ppopcontrol.IncludeHeaders[=boolean]

Default Value

False

Remarks

This property instructs the component to include the headers in the MessageText and LocalFile. If set to True, the headers for the message being retrieved will be placed before the message body in the MessageText property;. If LocalFile is set, then the headers will be written to that file before the message body. In this manner, the whole content of a MIME-encoded message can be passed to the MIME control for further message processing.

Data Type

Boolean

KeyCount Property (PPOP Control)

The number of records in the Key arrays.

Syntax

ppopcontrol.KeyCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• KeyEncoded
• KeyKeyring
• KeyPassphrase
• KeyUserId

The array indices start at 0 and end at KeyCount - 1.

This property is not available at design time.

Data Type

Integer

KeyEncoded Property (PPOP Control)

The key.

Syntax

ppopcontrol.KeyEncoded(KeyIndex)[=string]

Default Value

""

Remarks

The key. This property can be used to assign a specific key. The KeyFingerprint, KeyId, and KeyUserId properties may also be used to specify a key.

The KeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyCount property.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .KeyEncodedB.

This property is not available at design time.

Data Type

Binary String

KeyKeyring Property (PPOP Control)

The location of the keyring.

Syntax

ppopcontrol.KeyKeyring(KeyIndex)[=string]

Default Value

""

Remarks

The location of the keyring.

If the keyring is stored in a directory, set this property to the directory. The directory must contain the files "secring.gpg" and "pubring.gpg". A keyring may also be stored in a single file. If the keyring is a file this property should be set to the path of the file.

When This property is set the control will read the keyring and populate the Key property with the first key found in the keyring. Set KeyUserId to select a different key in the current keyring.

The KeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyCount property.

This property is not available at design time.

Data Type

String

KeyPassphrase Property (PPOP Control)

The passphrase for the key's secret key (if any).

Syntax

ppopcontrol.KeyPassphrase(KeyIndex)[=string]

Default Value

""

Remarks

The passphrase for the key's secret key (if any). This must be specified before operations requiring the secret key are attempted. The passphrase may be supplied in this property or through the KeyPassphrase event, which will fire when a passphrase is required.

The passphrase is required when using the following methods in KeyMgr:

• AddUserId
• SignUserId
• ChangeExpirationDate
• ChangePassphrase

When using the OpenPGP control, or an email-based control, the following methods require a passphrase for the key:

• Decrypt
• Sign
• SignAndEncrypt

The KeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyCount property.

This property is not available at design time.

Data Type

String

KeyUserId Property (PPOP Control)

The user Id of the key.

Syntax

ppopcontrol.KeyUserId(KeyIndex)[=string]

Default Value

""

Remarks

The user Id of the key. When a key is loaded this property is populated with the user Id associated with the key. This property may be set to load a key from the Keyring. When this property is set the control will search the Keyring for a key associated with the UserId specified.

When loading a key with multiple user Ids, this property will be populated with the UserId that was most recently added to the key. To discover all of the UserIds associated with a key query this property and KeyOtherUserIds after loading the key.

The UserId format is:

FirstName LastName (Comment) <Email>

Note that for OpenPGP v6, a key may be created with or without a UserId, as the field is optional. If a key was created without a UserId, the key's Fingerprint can be used as it's identifier instead.

When using this property to select a key you may also specify the key's Id, or any of its subkeys' Ids, instead of a user Id. The control will then search for a key with a matching Id. This is helpful in situations where you do not have the UserId but still need to load the key, such as within the OpenPGP control's RecipientInfo event.

The KeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyCount property.

This property is not available at design time.

Data Type

String

LastReply Property (PPOP Control)

This property indicates the last reply received from the server.

Syntax

ppopcontrol.LastReply

Default Value

""

Remarks

This property indicates the last reply received from the server. It can be used for informational purposes. The same information and more also can be retrieved through the PITrail event.

This property is read-only.

Data Type

String

LocalHost Property (PPOP Control)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

ppopcontrol.LocalHost[=string]

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the control initiate connections (or accept in the case of server controls) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the control is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

MailPort Property (PPOP Control)

This property includes the server port for POP (default 110).

Syntax

ppopcontrol.MailPort[=integer]

Default Value

110

Remarks

This property contains the server port for POP (default 110). A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

For implicit Secure Sockets Layer (SSL), use port 995 (please refer to the SSLStartMode property for more information).

This property is not available at design time.

Data Type

Integer

MailServer Property (PPOP Control)

This property includes the name or address of a mail server (internet post office server).

Syntax

ppopcontrol.MailServer[=string]

Default Value

""

Remarks

This property specifies the IP address (IP number in dotted internet format) or the domain name of the mail server. It is set before a connection is attempted and cannot be changed once a connection is in progress.

If this property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the control fails with an error.

If the control is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

Data Type

String

MaxLines Property (PPOP Control)

This property includes the maximum number of message lines other than headers to retrieve.

Syntax

ppopcontrol.MaxLines[=integer]

Default Value

0

Remarks

This property is used to limit the number of text lines other than headers retrieved for messages. It can be used to preview message headers and a portion of their contents, without incurring the overhead of downloading the entire message.

The default value of the property is 0. In this case, the entire message will be retrieved, without interruptions. Note: If you are not retrieving the entire message (MaxLines is nonzero), no data will be written to LocalFile.

Data Type

Integer

Message Property (PPOP Control)

This property provides the raw message content.

Syntax

ppopcontrol.Message

Default Value

""

Remarks

This property is populated after calling Retrieve and holds the raw message content. This can be used to access the data before any processing is done by the control.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .MessageB.

This property is read-only and not available at design time.

Data Type

Binary String

MessageCc Property (PPOP Control)

This property includes the value of the CC header of the last retrieved message.

Syntax

ppopcontrol.MessageCc

Default Value

""

Remarks

This property contains the value of the CC header of the last retrieved message. The same information also may be retrieved through the Header event.

This property is read-only.

Data Type

String

MessageCount Property (PPOP Control)

This property includes the number of messages in the mailbox.

Syntax

ppopcontrol.MessageCount

Default Value

0

Remarks

This property contains the number of messages in the mailbox. When the control is not connected to the server, the value of this property is 0. When connected, it contains the number of messages in the mailbox as reported by the POP server.

This property is read-only.

Data Type

Integer

MessageDate Property (PPOP Control)

This property includes the value of the date header of the last retrieved message.

Syntax

ppopcontrol.MessageDate

Default Value

""

Remarks

This property contains the value of the date header of the last retrieved message. The same information also may be retrieved through the Header event.

This property is read-only.

Data Type

String

MessageFrom Property (PPOP Control)

This property includes the value of the from header of the last retrieved message.

Syntax

ppopcontrol.MessageFrom

Default Value

""

Remarks

This property contains the value of the from header of the last retrieved message. The same information also may be retrieved through the Header event.

This property is read-only.

Data Type

String

MessageHeaderCount Property (PPOP Control)

The number of records in the MessageHeader arrays.

Syntax

ppopcontrol.MessageHeaderCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• MessageHeaderField
• MessageHeaderValue

The array indices start at 0 and end at MessageHeaderCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

MessageHeaderField Property (PPOP Control)

This property contains the name of the HTTP header (this is the same case as it is delivered).

Syntax

ppopcontrol.MessageHeaderField(MessageHeaderIndex)

Default Value

""

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The MessageHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

MessageHeaderValue Property (PPOP Control)

This property contains the header contents.

Syntax

ppopcontrol.MessageHeaderValue(MessageHeaderIndex)

Default Value

""

Remarks

This property contains the Header contents.

The MessageHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

MessageHeadersString Property (PPOP Control)

This property includes a string representation of the full headers of the message as retrieved from the server.

Syntax

ppopcontrol.MessageHeadersString

Default Value

""

Remarks

This property contains a string representation of the full headers of the message as retrieved from the server. If the control is not connected, or MessageNumber does not contain a valid message number, the value of this property is an empty string. Otherwise, it contains the full headers of the mail message as reported by the server.

The MailServer is asked about the headers of the message only if the MessageNumber property has changed. If MessageNumber has not changed, the control returns a cached value.

Example. Connect and Retrieve Messages:

POPControl.MailServer = "MyPOPServer" POPControl.User = "username" POPControl.Password = "password" POPControl.Connect() POPControl.MessageNumber = 1 MessageText = POPControl.MessageText MessageHeadersString = POPControl.MessageHeadersString

This property is read-only.

Data Type

String

MessageNumber Property (PPOP Control)

This property includes the current (selected) message.

Syntax

ppopcontrol.MessageNumber[=integer]

Default Value

1

Remarks

This property indicates the current (selected) message. This property specifies a message number in between 1 and MessageCount. The various control methods related to single messages use this property as a message pointer (see method descriptions and the QueryMessageSize method).

Data Type

Integer

MessageRecipientCount Property (PPOP Control)

The number of records in the MessageRecipient arrays.

Syntax

ppopcontrol.MessageRecipientCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• MessageRecipientAddress
• MessageRecipientName
• MessageRecipientOptions
• MessageRecipientType

The array indices start at 0 and end at MessageRecipientCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

MessageRecipientAddress Property (PPOP Control)

This property contains the email address of the recipient.

Syntax

ppopcontrol.MessageRecipientAddress(RecipientIndex)

Default Value

""

Remarks

This property contains the email address of the recipient.

The RecipientIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageRecipientCount property.

This property is read-only and not available at design time.

Data Type

String

MessageRecipientName Property (PPOP Control)

This property contains the name of the recipient.

Syntax

ppopcontrol.MessageRecipientName(RecipientIndex)

Default Value

""

Remarks

This property contains the name of the recipient.

The RecipientIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageRecipientCount property.

This property is read-only and not available at design time.

Data Type

String

MessageRecipientOptions Property (PPOP Control)

This property contains the recipient sending options (used only by SMTP).

Syntax

ppopcontrol.MessageRecipientOptions(RecipientIndex)

Default Value

""

Remarks

This property contains the recipient sending options (used only by SMTP). This must be a string of RFC-compliant recipient options (used by SMTP).

One type of option is a delivery status notification sent per recipient, which is specified by RFC 1891.

component.MessageRecipientOptions(0) = "NOTIFY SUCCESS,FAILURE,DELAY";

The RecipientIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageRecipientCount property.

This property is read-only and not available at design time.

Data Type

String

MessageRecipientType Property (PPOP Control)

This property contains the recipient type: To, Cc, or Bcc.

Syntax

ppopcontrol.MessageRecipientType(RecipientIndex)

Possible Values

rtTo(0), 
rtCc(1), 
rtBCc(2)

Default Value

0

Remarks

This property contains the recipient type: To, Cc, or Bcc.

The RecipientIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageRecipientCount property.

This property is read-only and not available at design time.

Data Type

Integer

MessageReplyTo Property (PPOP Control)

This property includes the value of the Reply-To header of the last retrieved message.

Syntax

ppopcontrol.MessageReplyTo

Default Value

""

Remarks

This property contains the value of the Reply-To header of the last retrieved message. The same information also may be retrieved through the Header event.

This property is read-only.

Data Type

String

MessageSubject Property (PPOP Control)

This property includes the value of the Subject header of the last retrieved message.

Syntax

ppopcontrol.MessageSubject

Default Value

""

Remarks

This property contains the value of the Subject header of the last retrieved message. The same information also may be retrieved through the Header event.

This property is read-only.

Data Type

String

MessageText Property (PPOP Control)

This property includes the full text of the message as retrieved from the server.

Syntax

ppopcontrol.MessageText

Default Value

""

Remarks

This property contains the full text of the message as retrieved from the server. If the control is not connected, or MessageNumber does not contain a valid message number, the value of this property is an empty string. Otherwise, it contains the text of the mail message as reported by the server (a maximum of MaxLines).

The MailServer is asked about the text of the message only if the MessageNumber property has changed. If MessageNumber has not changed, the control returns a cached value.

Example. Connect and Retrieve Messages:

POPControl.MailServer = "MyPOPServer" POPControl.User = "username" POPControl.Password = "password" POPControl.Connect() POPControl.MessageNumber = 1 MessageText = POPControl.MessageText MessageHeaders = POPControl.MessageHeaders

This property is read-only.

Data Type

String

MessageTo Property (PPOP Control)

This property includes the value of the To header of the last retrieved message.

Syntax

ppopcontrol.MessageTo

Default Value

""

Remarks

This property contains the value of the To header of the last retrieved message. The same information also may be retrieved through the Header event.

This property is read-only.

Data Type

String

Password Property (PPOP Control)

This property includes the password for the mailbox user.

Syntax

ppopcontrol.Password[=string]

Default Value

""

Remarks

This property contains the password for the mailbox user. This property must be set before the control connects to the MailServer.

Data Type

String

SignerKeyCount Property (PPOP Control)

The number of records in the SignerKey arrays.

Syntax

ppopcontrol.SignerKeyCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• SignerKeyEncoded
• SignerKeyKeyring
• SignerKeyUserId

The array indices start at 0 and end at SignerKeyCount - 1.

This property is not available at design time.

Data Type

Integer

SignerKeyEncoded Property (PPOP Control)

The key.

Syntax

ppopcontrol.SignerKeyEncoded(SignerKeyIndex)[=string]

Default Value

""

Remarks

The key. This property can be used to assign a specific key. The SignerKeyFingerprint, SignerKeyId, and SignerKeyUserId properties may also be used to specify a key.

The SignerKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerKeyCount property.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SignerKeyEncodedB.

This property is not available at design time.

Data Type

Binary String

SignerKeyKeyring Property (PPOP Control)

The location of the keyring.

Syntax

ppopcontrol.SignerKeyKeyring(SignerKeyIndex)[=string]

Default Value

""

Remarks

The location of the keyring.

If the keyring is stored in a directory, set this property to the directory. The directory must contain the files "secring.gpg" and "pubring.gpg". A keyring may also be stored in a single file. If the keyring is a file this property should be set to the path of the file.

When This property is set the control will read the keyring and populate the Key property with the first key found in the keyring. Set KeyUserId to select a different key in the current keyring.

The SignerKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerKeyCount property.

This property is not available at design time.

Data Type

String

SignerKeyUserId Property (PPOP Control)

The user Id of the key.

Syntax

ppopcontrol.SignerKeyUserId(SignerKeyIndex)[=string]

Default Value

""

Remarks

The user Id of the key. When a key is loaded this property is populated with the user Id associated with the key. This property may be set to load a key from the Keyring. When this property is set the control will search the Keyring for a key associated with the UserId specified.

When loading a key with multiple user Ids, this property will be populated with the UserId that was most recently added to the key. To discover all of the UserIds associated with a key query this property and KeyOtherUserIds after loading the key.

The UserId format is:

FirstName LastName (Comment) <Email>

Note that for OpenPGP v6, a key may be created with or without a UserId, as the field is optional. If a key was created without a UserId, the key's Fingerprint can be used as it's identifier instead.

When using this property to select a key you may also specify the key's Id, or any of its subkeys' Ids, instead of a user Id. The control will then search for a key with a matching Id. This is helpful in situations where you do not have the UserId but still need to load the key, such as within the OpenPGP control's RecipientInfo event.

The SignerKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerKeyCount property.

This property is not available at design time.

Data Type

String

SSLAcceptServerCertEffectiveDate Property (PPOP Control)

The date on which this certificate becomes valid.

Syntax

ppopcontrol.SSLAcceptServerCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExpirationDate Property (PPOP Control)

The date on which the certificate expires.

Syntax

ppopcontrol.SSLAcceptServerCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExtendedKeyUsage Property (PPOP Control)

A comma-delimited list of extended key usage identifiers.

Syntax

ppopcontrol.SSLAcceptServerCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprint Property (PPOP Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

ppopcontrol.SSLAcceptServerCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA1 Property (PPOP Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

ppopcontrol.SSLAcceptServerCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA256 Property (PPOP Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

ppopcontrol.SSLAcceptServerCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLAcceptServerCertIssuer Property (PPOP Control)

The issuer of the certificate.

Syntax

ppopcontrol.SSLAcceptServerCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKey Property (PPOP Control)

The private key of the certificate (if available).

Syntax

ppopcontrol.SSLAcceptServerCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKeyAvailable Property (PPOP Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

ppopcontrol.SSLAcceptServerCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLAcceptServerCertPrivateKeyContainer Property (PPOP Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

ppopcontrol.SSLAcceptServerCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKey Property (PPOP Control)

The public key of the certificate.

Syntax

ppopcontrol.SSLAcceptServerCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyAlgorithm Property (PPOP Control)

The textual description of the certificate's public key algorithm.

Syntax

ppopcontrol.SSLAcceptServerCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyLength Property (PPOP Control)

The length of the certificate's public key (in bits).

Syntax

ppopcontrol.SSLAcceptServerCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertSerialNumber Property (PPOP Control)

The serial number of the certificate encoded as a string.

Syntax

ppopcontrol.SSLAcceptServerCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLAcceptServerCertSignatureAlgorithm Property (PPOP Control)

The text description of the certificate's signature algorithm.

Syntax

ppopcontrol.SSLAcceptServerCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertStore Property (PPOP Control)

The name of the certificate store for the client certificate.

Syntax

ppopcontrol.SSLAcceptServerCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password-protected, specify the password in SSLAcceptServerCertStorePassword.

SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertStoreB.

Data Type

Binary String

SSLAcceptServerCertStorePassword Property (PPOP Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

ppopcontrol.SSLAcceptServerCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLAcceptServerCertStoreType Property (PPOP Control)

The type of certificate store for this certificate.

Syntax

ppopcontrol.SSLAcceptServerCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLAcceptServerCertSubjectAltNames Property (PPOP Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

ppopcontrol.SSLAcceptServerCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintMD5 Property (PPOP Control)

The MD5 hash of the certificate.

Syntax

ppopcontrol.SSLAcceptServerCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA1 Property (PPOP Control)

The SHA-1 hash of the certificate.

Syntax

ppopcontrol.SSLAcceptServerCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA256 Property (PPOP Control)

The SHA-256 hash of the certificate.

Syntax

ppopcontrol.SSLAcceptServerCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsage Property (PPOP Control)

The text description of UsageFlags .

Syntax

ppopcontrol.SSLAcceptServerCertUsage

Default Value

""

Remarks

The text description of SSLAcceptServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsageFlags Property (PPOP Control)

The flags that show intended use for the certificate.

Syntax

ppopcontrol.SSLAcceptServerCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:

Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertVersion Property (PPOP Control)

The certificate's version number.

Syntax

ppopcontrol.SSLAcceptServerCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLAcceptServerCertSubject Property (PPOP Control)

The subject of the certificate used for client authentication.

Syntax

ppopcontrol.SSLAcceptServerCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLAcceptServerCertEncoded Property (PPOP Control)

The certificate (PEM/Base64 encoded).

Syntax

ppopcontrol.SSLAcceptServerCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLCertEffectiveDate Property (PPOP Control)

The date on which this certificate becomes valid.

Syntax

ppopcontrol.SSLCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLCertExpirationDate Property (PPOP Control)

The date on which the certificate expires.

Syntax

ppopcontrol.SSLCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLCertExtendedKeyUsage Property (PPOP Control)

A comma-delimited list of extended key usage identifiers.

Syntax

ppopcontrol.SSLCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLCertFingerprint Property (PPOP Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

ppopcontrol.SSLCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLCertFingerprintSHA1 Property (PPOP Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

ppopcontrol.SSLCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLCertFingerprintSHA256 Property (PPOP Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

ppopcontrol.SSLCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLCertIssuer Property (PPOP Control)

The issuer of the certificate.

Syntax

ppopcontrol.SSLCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLCertPrivateKey Property (PPOP Control)

The private key of the certificate (if available).

Syntax

ppopcontrol.SSLCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLCertPrivateKeyAvailable Property (PPOP Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

ppopcontrol.SSLCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLCertPrivateKeyContainer Property (PPOP Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

ppopcontrol.SSLCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLCertPublicKey Property (PPOP Control)

The public key of the certificate.

Syntax

ppopcontrol.SSLCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLCertPublicKeyAlgorithm Property (PPOP Control)

The textual description of the certificate's public key algorithm.

Syntax

ppopcontrol.SSLCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertPublicKeyLength Property (PPOP Control)

The length of the certificate's public key (in bits).

Syntax

ppopcontrol.SSLCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLCertSerialNumber Property (PPOP Control)

The serial number of the certificate encoded as a string.

Syntax

ppopcontrol.SSLCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLCertSignatureAlgorithm Property (PPOP Control)

The text description of the certificate's signature algorithm.

Syntax

ppopcontrol.SSLCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertStore Property (PPOP Control)

The name of the certificate store for the client certificate.

Syntax

ppopcontrol.SSLCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password-protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertStoreB.

Data Type

Binary String

SSLCertStorePassword Property (PPOP Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

ppopcontrol.SSLCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (PPOP Control)

The type of certificate store for this certificate.

Syntax

ppopcontrol.SSLCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubjectAltNames Property (PPOP Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

ppopcontrol.SSLCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLCertThumbprintMD5 Property (PPOP Control)

The MD5 hash of the certificate.

Syntax

ppopcontrol.SSLCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA1 Property (PPOP Control)

The SHA-1 hash of the certificate.

Syntax

ppopcontrol.SSLCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA256 Property (PPOP Control)

The SHA-256 hash of the certificate.

Syntax

ppopcontrol.SSLCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertUsage Property (PPOP Control)

The text description of UsageFlags .

Syntax

ppopcontrol.SSLCertUsage

Default Value

""

Remarks

The text description of SSLCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLCertUsageFlags Property (PPOP Control)

The flags that show intended use for the certificate.

Syntax

ppopcontrol.SSLCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:

Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLCertVersion Property (PPOP Control)

The certificate's version number.

Syntax

ppopcontrol.SSLCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLCertSubject Property (PPOP Control)

The subject of the certificate used for client authentication.

Syntax

ppopcontrol.SSLCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLCertEncoded Property (PPOP Control)

The certificate (PEM/Base64 encoded).

Syntax

ppopcontrol.SSLCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLEnabled Property (PPOP Control)

This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.

Syntax

ppopcontrol.SSLEnabled[=boolean]

Default Value

False

Remarks

This property specifies whether TLS/SSL is enabled in the control. When False (default), the control operates in plaintext mode. When True, TLS/SSL is enabled.

TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.

This property is not available at design time.

Data Type

Boolean

SSLProvider Property (PPOP Control)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

ppopcontrol.SSLProvider[=integer]

Possible Values

sslpAutomatic(0), 
sslpPlatform(1), 
sslpInternal(2)

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the control will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The control will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

Data Type

Integer

SSLServerCertEffectiveDate Property (PPOP Control)

The date on which this certificate becomes valid.

Syntax

ppopcontrol.SSLServerCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExpirationDate Property (PPOP Control)

The date on which the certificate expires.

Syntax

ppopcontrol.SSLServerCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExtendedKeyUsage Property (PPOP Control)

A comma-delimited list of extended key usage identifiers.

Syntax

ppopcontrol.SSLServerCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLServerCertFingerprint Property (PPOP Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

ppopcontrol.SSLServerCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA1 Property (PPOP Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

ppopcontrol.SSLServerCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA256 Property (PPOP Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

ppopcontrol.SSLServerCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLServerCertIssuer Property (PPOP Control)

The issuer of the certificate.

Syntax

ppopcontrol.SSLServerCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLServerCertPrivateKey Property (PPOP Control)

The private key of the certificate (if available).

Syntax

ppopcontrol.SSLServerCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLServerCertPrivateKeyAvailable Property (PPOP Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

ppopcontrol.SSLServerCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLServerCertPrivateKeyContainer Property (PPOP Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

ppopcontrol.SSLServerCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLServerCertPublicKey Property (PPOP Control)

The public key of the certificate.

Syntax

ppopcontrol.SSLServerCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyAlgorithm Property (PPOP Control)

The textual description of the certificate's public key algorithm.

Syntax

ppopcontrol.SSLServerCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyLength Property (PPOP Control)

The length of the certificate's public key (in bits).

Syntax

ppopcontrol.SSLServerCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLServerCertSerialNumber Property (PPOP Control)

The serial number of the certificate encoded as a string.

Syntax

ppopcontrol.SSLServerCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLServerCertSignatureAlgorithm Property (PPOP Control)

The text description of the certificate's signature algorithm.

Syntax

ppopcontrol.SSLServerCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertStore Property (PPOP Control)

The name of the certificate store for the client certificate.

Syntax

ppopcontrol.SSLServerCertStore

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password-protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertStoreB.

This property is read-only.

Data Type

Binary String

SSLServerCertStorePassword Property (PPOP Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

ppopcontrol.SSLServerCertStorePassword

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

SSLServerCertStoreType Property (PPOP Control)

The type of certificate store for this certificate.

Syntax

ppopcontrol.SSLServerCertStoreType

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

Integer

SSLServerCertSubjectAltNames Property (PPOP Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

ppopcontrol.SSLServerCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLServerCertThumbprintMD5 Property (PPOP Control)

The MD5 hash of the certificate.

Syntax

ppopcontrol.SSLServerCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA1 Property (PPOP Control)

The SHA-1 hash of the certificate.

Syntax

ppopcontrol.SSLServerCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA256 Property (PPOP Control)

The SHA-256 hash of the certificate.

Syntax

ppopcontrol.SSLServerCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertUsage Property (PPOP Control)

The text description of UsageFlags .

Syntax

ppopcontrol.SSLServerCertUsage

Default Value

""

Remarks

The text description of SSLServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLServerCertUsageFlags Property (PPOP Control)

The flags that show intended use for the certificate.

Syntax

ppopcontrol.SSLServerCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:

Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLServerCertVersion Property (PPOP Control)

The certificate's version number.

Syntax

ppopcontrol.SSLServerCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLServerCertSubject Property (PPOP Control)

The subject of the certificate used for client authentication.

Syntax

ppopcontrol.SSLServerCertSubject

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

SSLServerCertEncoded Property (PPOP Control)

The certificate (PEM/Base64 encoded).

Syntax

ppopcontrol.SSLServerCertEncoded

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertEncodedB.

This property is read-only and not available at design time.

Data Type

Binary String

SSLStartMode Property (PPOP Control)

This property determines how the control starts the Secure Sockets Layer (SSL) negotiation.

Syntax

ppopcontrol.SSLStartMode[=integer]

Possible Values

sslAutomatic(0), 
sslImplicit(1), 
sslExplicit(2), 
sslNone(3)

Default Value

3

Remarks

The SSLStartMode property may have one of the following values:

Data Type

Integer

Timeout Property (PPOP Control)

The timeout for the control.

Syntax

ppopcontrol.Timeout[=integer]

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the control will wait for the operation to complete before returning control.

The control will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the control fails with an error.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

User Property (PPOP Control)

This property includes the user identifier for the mailbox.

Syntax

ppopcontrol.User[=string]

Default Value

""

Remarks

This property contains the user identifier for the mailbox. This property must be set before the control connects to the MailServer.

Data Type

String

Config Method (PPOP Control)

Sets or retrieves a configuration setting.

Syntax

ppopcontrol.Config ConfigurationString

Remarks

Config is a generic method available in every control. It is used to set and retrieve configuration settings for the control.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (PPOP Control)

This method connects to the mail server and attempts to log in.

Syntax

ppopcontrol.Connect 

Remarks

This method connects to the mail server and attempts to log in using the current User and Password. Then it retrieves the initial statistics about the mailbox contents (MessageCount and QueryTotalSize).

Example. Connect to POP Mailbox:

POPControl.MailServer = "MyPOPServer" POPControl.User = "username" POPControl.Password = "password" POPControl.Connect() POPControl.MessageNumber = 1 POPControl.Retrieve() MessageText = POPControl.MessageText MessageHeaders = POPControl.MessageHeaders

Decrypt Method (PPOP Control)

Decrypts the message.

Syntax

ppopcontrol.Decrypt 

Remarks

This method decrypts the specified message.

The message will be decrypted using the keys specified in Keys. Before decryption begins the control will fire the RecipientInfo event with information about the encrypted message, including the key used to encrypt the message. Within this event you may use the available information to load the correct key into Keys.

DecryptAndVerifySignature Method (PPOP Control)

Decrypts and verifies the signature of the message.

Syntax

ppopcontrol.DecryptAndVerifySignature 

Remarks

This method attempts to both decrypt and verify the signature of the message. All of the properties affected by calling the Decrypt and VerifySignature methods are affected in the same manner.

This method may be used when the data is signed, encrypted, or signed and encrypted. For instance, if the data is encrypted but not signed you may still use this method and the control will perform the decryption without error.

The message will be decrypted using the keys specified in Keys. Before decryption begins the control will fire the RecipientInfo event with information about the encrypted message, including the key used to encrypt the message. Within this event you may use the available information to load the correct key into Keys.

The message will be verified using the keys specified in SignerKeys. Before verification begins the control will fire the SignatureInfo event with information about the signature including the key used to sign the message. Within this event you may use the information available to load the correct key into SignerKeys.

By default, if the signature is not valid the control fails with an error. The configuration setting RequireValidSignature may be set to False to disable this requirement. When RequireValidSignature is set to False, the Status parameter of the VerificationStatus event should be checked to determine the result of the operation.

NOTE: This method does not attempt to check the validity of the signing key itself.

Delete Method (PPOP Control)

This method deletes a message specified by MessageNumber on the server.

Syntax

ppopcontrol.Delete 

Remarks

This method asks the MailServer to delete the message specified by MessageNumber. The message will not actually be deleted from the server until the connection is closed. To cancel a previous Delete, use the Reset method.

Disconnect Method (PPOP Control)

This method disconnects from the mail server.

Syntax

ppopcontrol.Disconnect 

Remarks

This method makes the control disconnect from the MailServer by sending the QUIT command. If successful, all changes to the mailbox are committed by the server. Otherwise, changes are rolled back to the initial state that the server was in before the connection.

DoEvents Method (PPOP Control)

This method processes events from the internal message queue.

Syntax

ppopcontrol.DoEvents 

Remarks

When DoEvents is called, the control processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Interrupt Method (PPOP Control)

This method interrupts the current method.

Syntax

ppopcontrol.Interrupt 

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ListMessageSizes Method (PPOP Control)

This method retrieves a list of all message sizes from the server.

Syntax

ppopcontrol.ListMessageSizes 

Remarks

This message retrieves a list of all message sizes from the server. For each message listed, a MessageList event will fire containing the number and size of the message.

ListMessageUIDs Method (PPOP Control)

This method retrieves a list of all message UIDs from the server.

Syntax

ppopcontrol.ListMessageUIDs 

Remarks

This method retrieves a list of all message UIDs from the server. For each message listed, a MessageList event will fire containing the number and UID of the message.

LocalizeDate Method (PPOP Control)

This method converts a valid RFC 822 message date to a local date and time.

Syntax

ppopcontrol.LocalizeDate DateTime

Remarks

This method can be used to convert an RFC 822 date and time string to the corresponding local date and time.

Note: Dates will be returned in the format: "MM/dd/yyyy hh:mm:ss".

QueryMessageUID Method (PPOP Control)

This method returns the unique identifier (UID) of the message as specified by the server.

Syntax

ppopcontrol.QueryMessageUID 

Remarks

This method returns the unique identifier (UID) of the message specified by MessageNumber. If the control is not connected, or MessageNumber does not contain a valid message number, the return value of this method is an empty string. Otherwise, it returns the UID of the mail message as reported by the server.

The MailServer is asked about the UID of the message only if the MessageNumber property has changed. If MessageNumber has not changed, the control returns a cached value.

Reset Method (PPOP Control)

This method resets all changes and revert back to the state when the user first connected.

Syntax

ppopcontrol.Reset 

Remarks

This method is used to reset all changes and revert back to the state when the user first connected. Asks the MailServer to reset all changes and revert back to the state it was when connected.

Retrieve Method (PPOP Control)

This method retrieves a message specified by MessageNumber from the server.

Syntax

ppopcontrol.Retrieve 

Remarks

This method is used to retrieve a message specified by MessageNumber from the server. It asks the MailServer to retrieve the message specified by MessageNumber. The message headers will arrive in the Header event, and the message text will arrive in the Transfer event.

The MaxLines property defines the number of lines retrieved.

Example. Connect and Retrieve Messages:

POPControl.MailServer = "MyPOPServer" POPControl.User = "username" POPControl.Password = "password" POPControl.Connect() POPControl.MessageNumber = 1 POPControl.Retrieve()

RetrieveHeaders Method (PPOP Control)

This method retrieves headers for a message specified by MessageNumber .

Syntax

ppopcontrol.RetrieveHeaders 

Remarks

Calling this method will retrieve the headers for the message specified by the MessageNumber property. The message headers will be provided by the Header event and also stored in the MessageHeaders property.

Example. Connect and Retrieve Message Headers:

POPControl.MailServer = "MyPOPServer" POPControl.User = "username" POPControl.Password = "password" POPControl.Connect() POPControl.MessageNumber = 1 POPControl.RetrieveHeaders()

SendCommand Method (PPOP Control)

This method sends the exact command directly to the server.

Syntax

ppopcontrol.SendCommand Command

Remarks

This method sends the command specified by Command to the server exactly as it is provided. Use this method to send additional or custom commands directly to the server.

After calling this method, check the LastReply property or monitor the PITrail event to obtain the server's response.

VerifySignature Method (PPOP Control)

Verifies the signature of the current message.

Syntax

ppopcontrol.VerifySignature 

Remarks

This method verifies the signature of the message.

The message will be verified using the keys specified in SignerKeys. Before verification begins the control will fire the SignatureInfo event with information about the signature including the key used to sign the message. Within this event you may use the information available to load the correct key into SignerKeys.

By default, if the signature is not valid the control fails with an error. The configuration setting RequireValidSignature may be set to False to disable this requirement. When RequireValidSignature is set to False, the Status parameter of the VerificationStatus event should be checked to determine the result of the operation.

ConnectionStatus Event (PPOP Control)

Fired to indicate changes in the connection state.

Syntax

Sub ppopcontrol_ConnectionStatus(ConnectionEvent As String, StatusCode As Integer, Description As String)

Remarks

This event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

EndTransfer Event (PPOP Control)

This event is fired when the message completes transferring.

Syntax

Sub ppopcontrol_EndTransfer(Direction As Integer)

Remarks

The EndTransfer event is fired when the message body completes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (PPOP Control)

Fired when information is available about errors during data delivery.

Syntax

Sub ppopcontrol_Error(ErrorCode As Integer, Description As String)

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the control fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Header Event (PPOP Control)

This event is fired for every message header being retrieved.

Syntax

Sub ppopcontrol_Header(Field As String, Value As String)

Remarks

The Field parameter contains the name of the header (in the same case as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

KeyPassphrase Event (PPOP Control)

Fired if the passphrase of current key is incorrect or empty.

Syntax

Sub ppopcontrol_KeyPassphrase(UserId As String, KeyId As String, Fingerprint As String, Passphrase As String)

Remarks

This event fires when the passphrase for the key is required. The passphrase must be specified before operations requiring the secret key are attempted. The passphrase may be supplied by setting the Passphrase parameter in this event, or by specifying the KeyPassphrase property before attempting the operation.

The passphrase is required when using the following methods in KeyMgr:

• AddUserId
• SignUserId
• ChangeExpirationDate
• ChangePassphrase

When using the OpenPGP control, or an email-based control, the following methods require a passphrase for the key:

• Decrypt
• Sign
• SignAndEncrypt

UserId holds the user Id of the key the passphrase is required for.

The UserId format is:

FirstName LastName (Comment) <Email>

Note that for OpenPGP v6, a key may be created with or without a UserId, as the field is optional. If a key was created without a UserId, the key's Fingerprint can be used as it's identifier instead.

KeyId is the hex-encoded, 4-byte or 8-byte Id of the key the passphrase is required for. For OpenPGP v4 keys and earlier, the key Id corresponds to the last 4 or 8 bytes of the key's Fingerprint. For OpenPGP v6 keys, the key Id corresponds to the first 8 bytes of the key's Fingerprint instead. For instance:

5E70662EA810E768

Fingerprint holds the hex-encoded, 20-byte fingerprint of the key the passphrase is required for. This is in the form:

5E70662EA810E768391A2FE8F7B7D49C89C9D7B1

MessageList Event (PPOP Control)

This event is fired for every message listed by ListMessageSizes and/or ListMessageUIDs .

Syntax

Sub ppopcontrol_MessageList(MessageNumber As Integer, MessageUID As String, MessageSize As Integer)

Remarks

When ListMessageSizes is called, MessageSize is valid, and MessageUID is always an empty string.

When ListMessageUIDs is called, MessageUID is valid, and MessageSize is 0.

PITrail Event (PPOP Control)

This event traces the commands sent to the mail server, and the respective replies.

Syntax

Sub ppopcontrol_PITrail(Direction As Integer, Message As String)

Remarks

The PITrail event is useful for debugging purposes. It shows all of the interaction between the client and the server, line by line, except for message header and body transfers.

The Message parameter contains the full text of the message. The Direction parameter shows the originator of the message:

Progress Event (PPOP Control)

Fired as progress is made.

Syntax

Sub ppopcontrol_Progress(BytesProcessed As Long64, PercentProcessed As Integer)

Remarks

This event is fired automatically as data is processed by the control.

The PercentProcessed parameter indicates the current status of the operation.

The BytesProcessed parameter holds the total number of bytes processed so far.

RecipientInfo Event (PPOP Control)

Fired for each recipient key of the encrypted message.

Syntax

Sub ppopcontrol_RecipientInfo(KeyId As String, Fingerprint As String, PublicKeyAlgorithm As String)

Remarks

This event fires when the Decrypt or DecryptAndVerifySignature method is called.

KeyId is the hex-encoded 4- or 8-byte Id of the key used to encrypt the message. If a subkey was used to encrypt the message this will be the Id of that subkey. For OpenPGP v4 keys and earlier, the key Id corresponds to the last 4 or 8 bytes of the key's Fingerprint. For OpenPGP v6 keys, the key Id corresponds to the first 8 bytes of the key's Fingerprint instead. For instance:

5E70662EA810E768

Fingerprint holds the hex-encoded, 20-byte fingerprint of the key. This is in the form:

5E70662EA810E768391A2FE8F7B7D49C89C9D7B1

The KeyId and Fingerprint parameters can be used to identify the correct key to specify in the Key* properties. The Key* properties can be set from within this event as this event fires directly before the decryption process begins.

It is recommended to use the Fingerprint to identify the correct key, as it is possible for different keys to have the same KeyId.

PublicKeyAlgorithm is the algorithm of the public key used to encrypt the message. Possible values are:

• RSA
• DSA
• ECDSA
• EdDSA
• Ed25519
• Ed448
• RSA-Legacy
• ECDH (Subkeys only)
• X25519 (Subkeys only)
• X448 (Subkeys only)

SignatureInfo Event (PPOP Control)

Fired during verification of the signed message.

Syntax

Sub ppopcontrol_SignatureInfo(KeyId As String, Fingerprint As String, SigningAlgorithm As String, PublicKeyAlgorithm As String)

Remarks

This event fires when the VerifySignature or DecryptAndVerifySignature method is called. It provides information about the signature of the message.

KeyId is the hex-encoded 4- or 8-byte Id of the key used to sign the message. If a subkey was used to sign the message this will be the Id of that subkey. For OpenPGP v4 keys and earlier, the key Id corresponds to the last 4 or 8 bytes of the key's Fingerprint. For OpenPGP v6 keys, the key Id corresponds to the first 8 bytes of the key's Fingerprint instead. For instance:

5E70662EA810E768

Fingerprint holds the hex-encoded, 20-byte fingerprint of the key. This is in the form:

5E70662EA810E768391A2FE8F7B7D49C89C9D7B1

The KeyId and Fingerprint parameters can be used to identify the correct key to specify in the SignerKey* properties. The SignerKey* properties can be set from within this event as this event fires directly before the verification process begins.

It is recommended to use the Fingerprint to identify the correct key, as it is possible for different keys to have the same KeyId.

SigningAlgorithm describes the hash algorithm used when the message was originally signed. This value is applicable only to the message signature, not the key used to sign the message. Possible values are:

• SHA1
• MD5
• SHA256
• SHA384
• SHA512
• SHA224
• RIPEMD160
• SHA3-256
• SHA3-512

PublicKeyAlgorithm is the algorithm of the public key used to sign the message. Possible values are:

• RSA
• DSA
• ECDSA
• EdDSA
• Ed25519
• Ed448
• RSA-Legacy
• ECDH (Subkeys only)
• X25519 (Subkeys only)
• X448 (Subkeys only)

SSLServerAuthentication Event (PPOP Control)

Fired after the server presents its certificate to the client.

Syntax

Sub ppopcontrol_SSLServerAuthentication(CertEncoded As String, CertSubject As String, CertIssuer As String, Status As String, Accept As Boolean)

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (PPOP Control)

Fired when secure connection progress messages are available.

Syntax

Sub ppopcontrol_SSLStatus(Message As String)

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (PPOP Control)

This event is fired when the message starts transferring.

Syntax

Sub ppopcontrol_StartTransfer(Direction As Integer)

Remarks

The StartTransfer event is fired when the message body starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Status Event (PPOP Control)

Shows the progress of the operation.

Syntax

Sub ppopcontrol_Status(Message As String)

Remarks

The event is fired for informational and logging purposes only. It may be used to track the progress of an operation.

The level of detail is controlled by the LogLevel setting.

Transfer Event (PPOP Control)

This event is fired when the message is transferred from MailServer .

Syntax

Sub ppopcontrol_Transfer(Direction As Integer, BytesTransferred As Long64, PercentDone As Integer, Text As String, EOL As Boolean)

Remarks

The Text parameter contains the portion of the message data to be retrieved.

The BytesTransferred parameter contains the number of bytes transferred since the beginning of the message, including header bytes. At the end of transmission (i.e., when the last Transfer event is fired), BytesTransferred equals the value of the QueryMessageSize method.

The Transfer event is fired for every line of the message. For complete lines, there is no terminating newline at the end of the Text parameter, and EOL is True. The EOL parameter is False when a line is broken (usually for being too long).

A faster way to retrieve a message is to assign a value to the LocalFile property and use the Transfer event to check the progress rather than to get the actual data.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Note: For the PercentDone parameter value to be correct, the GetMessageSize configuration setting must be set to True.

VerificationStatus Event (PPOP Control)

Fired after verification of the signed message.

Syntax

Sub ppopcontrol_VerificationStatus(KeyId As String, Fingerprint As String, Status As Integer)

Remarks

This event fires when VerifySignature or DecryptAndVerifySignature is called. It provides information about the result.

KeyId is the hex-encoded 4- or 8-byte Id of the key used to sign the message. For OpenPGP v4 keys and earlier, the key Id corresponds to the last 4 or 8 bytes of the key's Fingerprint. For OpenPGP v6 keys, the key Id corresponds to the first 8 bytes of the key's Fingerprint instead. For instance:

5E70662EA810E768

Fingerprint holds the hex-encoded, 20-byte fingerprint of the key. This is in the form:

5E70662EA810E768391A2FE8F7B7D49C89C9D7B1

Status holds the result of the operation. Possible values are:

Config Settings (PPOP Control)

PPOP Config Settings

POP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

Trappable Errors (PPOP Control)

POP Errors

The control may also return one of the following error codes, which are inherited from other controls.

TCPClient Errors

SSL Errors

TCP/IP Errors

OpenPGP Errors