PSMTP Control

Properties   Methods   Events   Config Settings   Errors  

The PSMTP control is used to send encrypted and/or signed emails with or without attachments using OpenPGP.

Syntax

PSMTP

Remarks

You can send an OpenPGP signed and encrypted message using the PSMTP control by calling the Encrypt, Sign, and SignAndEncrypt methods. Additionally, it enables you to create messages bound for multiple recipients with different keys, simultaneously encrypt and compress with the most popular compression algorithms, and control other aspects such as the encrypting algorithm to use.

Construct the Message

To begin specify common email properties such as SendTo, Cc, BCc, Subject, and MessageText. Connection information is specified by setting MailServer, and MailPort.

Sign

To sign a message specify a recipient key using the Key* properties. For instance: PSMTP1.KeyCount = 1 PSMTP1.KeyKeyring(0) = "c:\my_keyring_dir" PSMTP1.KeyUserId(0) = "sender@nsoftware.com" PSMTP1.KeyPassphrase(0) = "password" The specified private key will be used to sign the message when Sign is called.

Encrypt

To both sign and encrypt a message call SignAndEncrypt.

To encrypt a message specify a recipient key using the RecipientKey* properties. For instance: PSMTP1.RecipientKeyCount = 1 PSMTP1.RecipientKeyKeyring(0) = "c:\my_keyring_dir" PSMTP1.RecipientKeyUserId(0) = "recipient@nsoftware.com" The specified public key will be used to encrypt the message when Encrypt is called.

Sign and Encrypt

You can call the SignAndEncrypt method to sign and encrypt messages in one step. Set the public key of the recipient to be used for encryption in the and the private key to be used to sign the message in the Key* properties .

Send

Once all the appropriate properties have been set, call the Send method and the message will be sent to its intended recipient(s).

Property List

The following is the full list of the properties of the control with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the control with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the control with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the control with short descriptions. Click on the links for further details.

AllowExtensions Property (PSMTP Control)

This property is a switch allowing the control to use ESMTP features (Extended SMTP).

Syntax

psmtpcontrol.AllowExtensions[=boolean]

Default Value

True

Remarks

This property is a switch allowing the control to use ESMTP features (Extended SMTP). If this property is True, the control will first send the EHLO greeting (Extended Hello) to the server and, if that fails, the standard HELO command will be sent.

This property is True by default but may be disabled if it is known in advance that the MailServer does not support SMTP extensions.

This property is not available at design time.

Data Type

Boolean

AuthMechanism Property (PSMTP Control)

This property is used when connecting to the mail server.

Syntax

psmtpcontrol.AuthMechanism[=integer]

Possible Values

amUserPassword(0), 
amCRAMMD5(1), 
amNTLM(2), 
amAPOP(3), 
amSASLPlain(4), 
amSASLDigestMD5(5), 
amKerberos(6), 
amXOAUTH2(7)

Default Value

0

Remarks

This is the authentication mechanism property to be used when connecting to the mail server.

By default, this property is amUserPassword (0), and if the User and Password properties are set, the AUTH command is sent to the server for authentication. If this property is set to amCRAMMD5 (1), CRAM-MD5 authentication is used instead.

If this property is set to amNTLM (2), NTLM authentication will be used.

If this property is set to amKerberos (6), Kerberos authentication will be used.

Note: This functionality is available only in Windows.

When set to amXOAUTH2 (7), set User to the username and AuthorizationIdentity to the OAuth token. See AuthorizationIdentity for details.

Data Type

Integer

BCc Property (PSMTP Control)

This property includes a comma-separated list of addresses for blind carbon copies (optional).

Syntax

psmtpcontrol.BCc[=string]

Default Value

""

Remarks

This property specifies a comma-separated list of destinations for blind carbon copies of the mail message. A copy of the message is sent to each destination. Because no BCc SMTP header is created containing the destination addresses, individual recipients never see the list of the other recipients.

The control will return an error if the MailServer returns an error code about any email address specified in SendTo or Cc but it will fire an Error event only if the same thing happens with an email address specified in this property.

If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.

Note: You must clear the MessageRecipients properties before setting this property to remove previous recipients.

Data Type

String

Cc Property (PSMTP Control)

This property includes a comma-separated list of addresses for carbon copies (optional).

Syntax

psmtpcontrol.Cc[=string]

Default Value

""

Remarks

This property specifies a comma-separated list of destinations for carbon copies of the mail message. A copy of the message is sent to each destination, and a Cc SMTP header is created containing the destination addresses. This header is sent to every recipient of the message. If you don't want to copy this information to every recipient, then use blind carbon copies instead (see the description of the BCc).

The control will return an error if the MailServer returns an error code about any email address specified in SendTo or Cc but it will fire an Error event only if the same thing happens with an email address specified in BCc.

If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.

Note: You must clear the MessageRecipients properties before setting this property to remove previous recipients.

Data Type

String

CompressionMethod Property (PSMTP Control)

The compression algorithm used.

Syntax

psmtpcontrol.CompressionMethod[=string]

Default Value

"zip"

Remarks

This property specifies which compression method is used when generating output. Possible values are:

• zip (default)
• zlib
• bzip2
• none or uncompressed

Data Type

String

Connected Property (PSMTP Control)

Whether the control is connected.

Syntax

psmtpcontrol.Connected

Default Value

False

Remarks

This property is used to determine whether or not the control is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.

This property is read-only and not available at design time.

Data Type

Boolean

DeliveryNotificationTo Property (PSMTP Control)

This property includes the email address to which to send a delivery notification.

Syntax

psmtpcontrol.DeliveryNotificationTo[=string]

Default Value

""

Remarks

This property contains the email address to send to which to send a delivery notification. When set, a Return-Receipt-To header is added to the message. This property should be set to an email address that can receive the delivery notification.

Data Type

String

EncryptingAlgorithm Property (PSMTP Control)

The encryption algorithm used when encrypting.

Syntax

psmtpcontrol.EncryptingAlgorithm[=string]

Default Value

"AES128"

Remarks

This property specifies the encryption algorithm used when encrypting. Possible values are:

• CAST5
• 3DES or TripleDES
• AES256
• AES192
• AES128 (default)
• BLOWFISH
• TWOFISH
• IDEA
• AES256-OCB (AEAD)
• AES192-OCB (AEAD)
• AES128-OCB (AEAD)
• AES256-GCM (AEAD)
• AES192-GCM (AEAD)
• AES128-GCM (AEAD)

Note that if UseArgon2 is enabled, and SymmetricPassphrase is specified, an AEAD encryption algorithm (AES*-OCB and AES*-GCM) must be specified for symmetric encryption. If UseArgon2 is disabled, and an AEAD encryption algorithm is specified, the AEAD mode (OCB or GCM) will be ignored when performing symmetric encryption.

An AEAD encryption algorithm may optionally be utilized when encrypting messages (when calling Encrypt). In this case, the AEADChunkSizeExp configuration will specify the chunk size for splitting plaintext for encryption. Please see AEADChunkSizeExp for additional details.

Data Type

String

FirewallAutoDetect Property (PSMTP Control)

Whether to automatically detect and use firewall system settings, if available.

Syntax

psmtpcontrol.FirewallAutoDetect[=boolean]

Default Value

False

Remarks

Whether to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (PSMTP Control)

The type of firewall to connect through.

Syntax

psmtpcontrol.FirewallType[=integer]

Possible Values

fwNone(0), 
fwTunnel(1), 
fwSOCKS4(2), 
fwSOCKS5(3), 
fwSOCKS4A(10)

Default Value

0

Remarks

The type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (PSMTP Control)

The name or IP address of the firewall (optional).

Syntax

psmtpcontrol.FirewallHost[=string]

Default Value

""

Remarks

The name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the control fails with an error.

Data Type

String

FirewallPassword Property (PSMTP Control)

A password if authentication is to be used when connecting through the firewall.

Syntax

psmtpcontrol.FirewallPassword[=string]

Default Value

""

Remarks

A password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the control fails with an error.

Data Type

String

FirewallPort Property (PSMTP Control)

The Transmission Control Protocol (TCP) port for the firewall Host .

Syntax

psmtpcontrol.FirewallPort[=integer]

Default Value

0

Remarks

The Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (PSMTP Control)

A username if authentication is to be used when connecting through a firewall.

Syntax

psmtpcontrol.FirewallUser[=string]

Default Value

""

Remarks

A username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the control fails with an error.

Data Type

String

From Property (PSMTP Control)

This property includes the email address of the sender (required).

Syntax

psmtpcontrol.From[=string]

Default Value

""

Remarks

This property is used to create a From SMTP header. This header identifies the sender of the message. A valid email address is required. Examples of valid addresses are as follows: "Friendly Name" <address@company.com> or address@company.com

If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.

Data Type

String

Idle Property (PSMTP Control)

The current status of the control.

Syntax

psmtpcontrol.Idle

Default Value

True

Remarks

This property will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.

This property is read-only.

Data Type

Boolean

Importance Property (PSMTP Control)

This property indicates the importance of the mail message (optional).

Syntax

psmtpcontrol.Importance[=integer]

Possible Values

miUnspecified(0), 
miHigh(1), 
miNormal(2), 
miLow(3)

Default Value

0

Remarks

This property indicates the importance of the mail message (optional). When set, an Importance header will be added to the message.

Importance is an indication to the recipient(s) about the level of importance of the message. The possible values are Unspecified (0), High (1), Normal (2), and Low (3).

Data Type

Integer

KeyCount Property (PSMTP Control)

The number of records in the Key arrays.

Syntax

psmtpcontrol.KeyCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• KeyEncoded
• KeyKeyring
• KeyPassphrase
• KeyUserId

The array indices start at 0 and end at KeyCount - 1.

This property is not available at design time.

Data Type

Integer

KeyEncoded Property (PSMTP Control)

The key.

Syntax

psmtpcontrol.KeyEncoded(KeyIndex)[=string]

Default Value

""

Remarks

The key. This property can be used to assign a specific key. The KeyFingerprint, KeyId, and KeyUserId properties may also be used to specify a key.

The KeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyCount property.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .KeyEncodedB.

This property is not available at design time.

Data Type

Binary String

KeyKeyring Property (PSMTP Control)

The location of the keyring.

Syntax

psmtpcontrol.KeyKeyring(KeyIndex)[=string]

Default Value

""

Remarks

The location of the keyring.

If the keyring is stored in a directory, set this property to the directory. The directory must contain the files "secring.gpg" and "pubring.gpg". A keyring may also be stored in a single file. If the keyring is a file this property should be set to the path of the file.

When This property is set the control will read the keyring and populate the Key property with the first key found in the keyring. Set KeyUserId to select a different key in the current keyring.

The KeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyCount property.

This property is not available at design time.

Data Type

String

KeyPassphrase Property (PSMTP Control)

The passphrase for the key's secret key (if any).

Syntax

psmtpcontrol.KeyPassphrase(KeyIndex)[=string]

Default Value

""

Remarks

The passphrase for the key's secret key (if any). This must be specified before operations requiring the secret key are attempted. The passphrase may be supplied in this property or through the KeyPassphrase event, which will fire when a passphrase is required.

The passphrase is required when using the following methods in KeyMgr:

• AddUserId
• SignUserId
• ChangeExpirationDate
• ChangePassphrase

When using the OpenPGP control, or an email-based control, the following methods require a passphrase for the key:

• Decrypt
• Sign
• SignAndEncrypt

The KeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyCount property.

This property is not available at design time.

Data Type

String

KeyUserId Property (PSMTP Control)

The user Id of the key.

Syntax

psmtpcontrol.KeyUserId(KeyIndex)[=string]

Default Value

""

Remarks

The user Id of the key. When a key is loaded this property is populated with the user Id associated with the key. This property may be set to load a key from the Keyring. When this property is set the control will search the Keyring for a key associated with the UserId specified.

When loading a key with multiple user Ids, this property will be populated with the UserId that was most recently added to the key. To discover all of the UserIds associated with a key query this property and KeyOtherUserIds after loading the key.

The UserId format is:

FirstName LastName (Comment) <Email>

Note that for OpenPGP v6, a key may be created with or without a UserId, as the field is optional. If a key was created without a UserId, the key's Fingerprint can be used as it's identifier instead.

When using this property to select a key you may also specify the key's Id, or any of its subkeys' Ids, instead of a user Id. The control will then search for a key with a matching Id. This is helpful in situations where you do not have the UserId but still need to load the key, such as within the OpenPGP control's RecipientInfo event.

The KeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyCount property.

This property is not available at design time.

Data Type

String

LastReply Property (PSMTP Control)

This property indicates the last reply received from the server.

Syntax

psmtpcontrol.LastReply

Default Value

""

Remarks

This property indicates the last reply received from the server. It can be used for informational purposes. The same information and more also can be retrieved through the PITrail event.

This property is read-only.

Data Type

String

LocalHost Property (PSMTP Control)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

psmtpcontrol.LocalHost[=string]

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the control initiate connections (or accept in the case of server controls) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the control is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

MailPort Property (PSMTP Control)

This property includes the server port for SMTP (default 25).

Syntax

psmtpcontrol.MailPort[=integer]

Default Value

25

Remarks

This property contains the server port for SMTP (default 25). A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

For an implicit Secure Sockets Layer (SSL), use port 465 (please refer to the SSLStartMode property for more information).

This property is not available at design time.

Data Type

Integer

MailServer Property (PSMTP Control)

This property includes the name or address of a mail server (mail relay).

Syntax

psmtpcontrol.MailServer[=string]

Default Value

""

Remarks

This property specifies the IP address (IP number in dotted internet format) or domain name for a mail relay through which messages will be routed. It is set before a connection is attempted and cannot be changed once a connection is in progress.

The current version of the control does not provide a default value for the mail relay. You must provide a host name yourself. Generally, any internet host with an SMTP server will suffice (e.g., a UNIX host), but it is preferable to select a MailServer that is close to the machine sending mail.

If this property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, an error is returned.

If the control is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

Data Type

String

Message Property (PSMTP Control)

This property provides a way to set the raw message content.

Syntax

psmtpcontrol.Message[=string]

Default Value

""

Remarks

This property may be set instead of MessageText. This value will not be modified in any way by the control and will be sent as is. Use caution when setting this value as all encoding must be done before supplying the value to the component.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .MessageB.

This property is not available at design time.

Data Type

Binary String

MessageDate Property (PSMTP Control)

This property includes the date of the mail message (optional).

Syntax

psmtpcontrol.MessageDate[=string]

Default Value

"*"

Remarks

If this property contains a nonempty string, then a Date SMTP header is created and attached to the message. If it is an empty string, then the date information is added by the mail relay(s) the message goes through.

Special case: If this property is set to the special value "*", a Date SMTP header reflecting the current date and time is generated when MessageHeaders is computed and the message is sent. This is the default behavior of the control

RFC 822 contains detailed date format specifications. An example of a valid date is "Fri, 1 Mar 96 21:24:52 EST".

This property is not available at design time.

Data Type

String

MessageHeaderCount Property (PSMTP Control)

The number of records in the MessageHeader arrays.

Syntax

psmtpcontrol.MessageHeaderCount

Default Value

0

Remarks

This property controls the size of the following arrays:

• MessageHeaderField
• MessageHeaderValue

The array indices start at 0 and end at MessageHeaderCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

MessageHeaderField Property (PSMTP Control)

This property contains the name of the HTTP header (this is the same case as it is delivered).

Syntax

psmtpcontrol.MessageHeaderField(MessageHeaderIndex)

Default Value

""

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The MessageHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

MessageHeaderValue Property (PSMTP Control)

This property contains the header contents.

Syntax

psmtpcontrol.MessageHeaderValue(MessageHeaderIndex)

Default Value

""

Remarks

This property contains the Header contents.

The MessageHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

MessageHeadersString Property (PSMTP Control)

This property includes the string representation of RFC 822-encoded headers of the message.

Syntax

psmtpcontrol.MessageHeadersString

Default Value

""

Remarks

This property holds the full headers of the message in RFC 822 format.

This property is read-only.

Data Type

String

MessageId Property (PSMTP Control)

This property includes the message identifier for the message.

Syntax

psmtpcontrol.MessageId[=string]

Default Value

"*"

Remarks

This property contains the message identifier for the message. When set, the value of MessageId is used as the Message-Id header value of the message. A special value of "*" will automatically generate a random unique identifier for the message.

This property is not available at design time.

Data Type

String

MessageRecipientCount Property (PSMTP Control)

The number of records in the MessageRecipient arrays.

Syntax

psmtpcontrol.MessageRecipientCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• MessageRecipientAddress
• MessageRecipientName
• MessageRecipientOptions
• MessageRecipientType

The array indices start at 0 and end at MessageRecipientCount - 1.

This property is not available at design time.

Data Type

Integer

MessageRecipientAddress Property (PSMTP Control)

This property contains the email address of the recipient.

Syntax

psmtpcontrol.MessageRecipientAddress(RecipientIndex)[=string]

Default Value

""

Remarks

This property contains the email address of the recipient.

The RecipientIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageRecipientCount property.

This property is not available at design time.

Data Type

String

MessageRecipientName Property (PSMTP Control)

This property contains the name of the recipient.

Syntax

psmtpcontrol.MessageRecipientName(RecipientIndex)[=string]

Default Value

""

Remarks

This property contains the name of the recipient.

The RecipientIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageRecipientCount property.

This property is not available at design time.

Data Type

String

MessageRecipientOptions Property (PSMTP Control)

This property contains the recipient sending options (used only by SMTP).

Syntax

psmtpcontrol.MessageRecipientOptions(RecipientIndex)[=string]

Default Value

""

Remarks

This property contains the recipient sending options (used only by SMTP). This must be a string of RFC-compliant recipient options (used by SMTP).

One type of option is a delivery status notification sent per recipient, which is specified by RFC 1891.

component.MessageRecipientOptions(0) = "NOTIFY SUCCESS,FAILURE,DELAY";

The RecipientIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageRecipientCount property.

This property is not available at design time.

Data Type

String

MessageRecipientType Property (PSMTP Control)

This property contains the recipient type: To, Cc, or Bcc.

Syntax

psmtpcontrol.MessageRecipientType(RecipientIndex)[=integer]

Possible Values

rtTo(0), 
rtCc(1), 
rtBCc(2)

Default Value

0

Remarks

This property contains the recipient type: To, Cc, or Bcc.

The RecipientIndex parameter specifies the index of the item in the array. The size of the array is controlled by the MessageRecipientCount property.

This property is not available at design time.

Data Type

Integer

MessageText Property (PSMTP Control)

This property includes the full text of the message to send (without headers).

Syntax

psmtpcontrol.MessageText[=string]

Default Value

""

Remarks

This property contains the full text of the message.

The text contained in this property should be a collection of lines with lengths less than or equal to 80 bytes separated by CRLF (Chr$(13) & Chr$(10)) . The text in the message lines must contain 7-bit characters so that the message can successfully pass through the multitude of mail systems on the Internet.

The control automatically escapes lines that start with a "." by adding another as specified in RFC 821. The message text is unescaped by the receiving agent, so the process is fully transparent.

Data Type

String

OtherHeaders Property (PSMTP Control)

This property includes an RFC 822-compliant string consisting of extra headers.

Syntax

psmtpcontrol.OtherHeaders[=string]

Default Value

""

Remarks

This property contains a string of headers to be appended to the message headers created from other properties like SendTo, Subject, and so on.

The headers must be of the format "header: value" as specified in RFC 822. Header lines should be separated by CRLF (Chr$(13) & Chr$(10)) .

Use this property with caution. If this property contains invalid headers, message delivery might not be successful.

This property is useful for extending the functionality of the control. A good example is delivery of MIME-encoded messages.

Special case: If this property starts with an empty line (CRLF), then the value of this property is used instead of the normally computed message headers.

Example. Sending an Email with an Additional Header:

component.MailServer = "MyServer"; component.From = "me@server.com"; component.SendTo = "recipient@server.com"; component.Subject = "My Subject"; component.MessageText = "This is the message body."; component.OtherHeaders = "HeaderName: HeaderValue"; component.Send();

This property is not available at design time.

Data Type

String

Password Property (PSMTP Control)

This property includes a password for logon to the MailServer .

Syntax

psmtpcontrol.Password[=string]

Default Value

""

Remarks

If this property is set to a nonempty string, then when connecting to the MailServer an AUTH or CRAM-MD5 (depending on the value of AuthMechanism) command is sent to provide authentication information for the user.

This property is not available at design time.

Data Type

String

Priority Property (PSMTP Control)

This property includes the priority of the mail message (optional).

Syntax

psmtpcontrol.Priority[=integer]

Possible Values

epUnspecified(0), 
epNormal(1), 
epUrgent(2), 
epNonUrgent(3)

Default Value

0

Remarks

When this property is set, a priority header will be added to the message. Priority is an indication about the delivery priority of the message. The possible values are epNormal, epUrgent, and epNonUrgent.

Data Type

Integer

ReadReceiptTo Property (PSMTP Control)

This property includes the email address to send a read-receipt to.

Syntax

psmtpcontrol.ReadReceiptTo[=string]

Default Value

""

Remarks

When this property is set, a Disposition-Notification-To header is added to the message. This property should be set to an email address that should receive the read-receipt.

Data Type

String

RecipientKeyCount Property (PSMTP Control)

The number of records in the RecipientKey arrays.

Syntax

psmtpcontrol.RecipientKeyCount[=integer]

Default Value

0

Remarks

This property controls the size of the following arrays:

• RecipientKeyEncoded
• RecipientKeyKeyring
• RecipientKeyUserId

The array indices start at 0 and end at RecipientKeyCount - 1.

This property is not available at design time.

Data Type

Integer

RecipientKeyEncoded Property (PSMTP Control)

The key.

Syntax

psmtpcontrol.RecipientKeyEncoded(RecipientKeyIndex)[=string]

Default Value

""

Remarks

The key. This property can be used to assign a specific key. The RecipientKeyFingerprint, RecipientKeyId, and RecipientKeyUserId properties may also be used to specify a key.

The RecipientKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientKeyCount property.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .RecipientKeyEncodedB.

This property is not available at design time.

Data Type

Binary String

RecipientKeyKeyring Property (PSMTP Control)

The location of the keyring.

Syntax

psmtpcontrol.RecipientKeyKeyring(RecipientKeyIndex)[=string]

Default Value

""

Remarks

The location of the keyring.

If the keyring is stored in a directory, set this property to the directory. The directory must contain the files "secring.gpg" and "pubring.gpg". A keyring may also be stored in a single file. If the keyring is a file this property should be set to the path of the file.

When This property is set the control will read the keyring and populate the Key property with the first key found in the keyring. Set KeyUserId to select a different key in the current keyring.

The RecipientKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientKeyCount property.

This property is not available at design time.

Data Type

String

RecipientKeyUserId Property (PSMTP Control)

The user Id of the key.

Syntax

psmtpcontrol.RecipientKeyUserId(RecipientKeyIndex)[=string]

Default Value

""

Remarks

The user Id of the key. When a key is loaded this property is populated with the user Id associated with the key. This property may be set to load a key from the Keyring. When this property is set the control will search the Keyring for a key associated with the UserId specified.

When loading a key with multiple user Ids, this property will be populated with the UserId that was most recently added to the key. To discover all of the UserIds associated with a key query this property and KeyOtherUserIds after loading the key.

The UserId format is:

FirstName LastName (Comment) <Email>

Note that for OpenPGP v6, a key may be created with or without a UserId, as the field is optional. If a key was created without a UserId, the key's Fingerprint can be used as it's identifier instead.

When using this property to select a key you may also specify the key's Id, or any of its subkeys' Ids, instead of a user Id. The control will then search for a key with a matching Id. This is helpful in situations where you do not have the UserId but still need to load the key, such as within the OpenPGP control's RecipientInfo event.

The RecipientKeyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientKeyCount property.

This property is not available at design time.

Data Type

String

ReplyTo Property (PSMTP Control)

This property includes a mail address to which to reply (optional).

Syntax

psmtpcontrol.ReplyTo[=string]

Default Value

""

Remarks

If this property contains a nonempty string, a Reply-To SMTP header is created for the message. This header shows the address to use for replies, which is useful if this address is different from the one in From.

If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.

Data Type

String

ReturnPath Property (PSMTP Control)

This property sets the Return-Path to be used for sending email.

Syntax

psmtpcontrol.ReturnPath[=string]

Default Value

""

Remarks

Setting this property sets the Return-Path to be used for sending email. If this is not set, the value in the From property is used.

Data Type

String

SendTo Property (PSMTP Control)

This property includes a comma-separated list of addresses for destinations (required).

Syntax

psmtpcontrol.SendTo[=string]

Default Value

""

Remarks

This property specifies a comma-separated list of destinations for the mail message. A copy of the message is sent to each of them, and a To SMTP header is created containing the destination addresses.

Examples of valid addresses are as follows: "Friendly Name" <address@company.com> or address@company.com

The control will fail if the MailServer returns an error code about any email address specified in SendTo or Cc but it will silently ignore the error if the same thing happens with an email address specified in BCc.

If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.

Note: You must clear the MessageRecipients properties before setting this property to remove previous recipients.

Data Type

String

Sensitivity Property (PSMTP Control)

This property indicates the sensitivity of the mail message (optional).

Syntax

psmtpcontrol.Sensitivity[=integer]

Possible Values

esUnspecified(0), 
esPersonal(1), 
esPrivate(2), 
esCompanyConfidential(3)

Default Value

0

Remarks

This property provides an indication of how sensitive it is to disclose the message to people other than the recipients of the message. When set, a Sensitivity header will added to the message. Possible values are as follows: esPersonal (1), esPrivate (2), and esCompanyConfidential (3).

Data Type

Integer

SigningAlgorithm Property (PSMTP Control)

The signature hash algorithm used when signing.

Syntax

psmtpcontrol.SigningAlgorithm[=string]

Default Value

"SHA256"

Remarks

This property specifies the signature hash algorithm used when signing. Possible values are:

• SHA1
• MD5
• SHA256 (default)
• SHA384
• SHA512
• SHA224
• RIPEMD160
• SHA3-256
• SHA3-512

Data Type

String

SSLAcceptServerCertEffectiveDate Property (PSMTP Control)

The date on which this certificate becomes valid.

Syntax

psmtpcontrol.SSLAcceptServerCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExpirationDate Property (PSMTP Control)

The date on which the certificate expires.

Syntax

psmtpcontrol.SSLAcceptServerCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExtendedKeyUsage Property (PSMTP Control)

A comma-delimited list of extended key usage identifiers.

Syntax

psmtpcontrol.SSLAcceptServerCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprint Property (PSMTP Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA1 Property (PSMTP Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA256 Property (PSMTP Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLAcceptServerCertIssuer Property (PSMTP Control)

The issuer of the certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKey Property (PSMTP Control)

The private key of the certificate (if available).

Syntax

psmtpcontrol.SSLAcceptServerCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKeyAvailable Property (PSMTP Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLAcceptServerCertPrivateKeyContainer Property (PSMTP Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

psmtpcontrol.SSLAcceptServerCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKey Property (PSMTP Control)

The public key of the certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyAlgorithm Property (PSMTP Control)

The textual description of the certificate's public key algorithm.

Syntax

psmtpcontrol.SSLAcceptServerCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyLength Property (PSMTP Control)

The length of the certificate's public key (in bits).

Syntax

psmtpcontrol.SSLAcceptServerCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertSerialNumber Property (PSMTP Control)

The serial number of the certificate encoded as a string.

Syntax

psmtpcontrol.SSLAcceptServerCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLAcceptServerCertSignatureAlgorithm Property (PSMTP Control)

The text description of the certificate's signature algorithm.

Syntax

psmtpcontrol.SSLAcceptServerCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertStore Property (PSMTP Control)

The name of the certificate store for the client certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password-protected, specify the password in SSLAcceptServerCertStorePassword.

SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertStoreB.

Data Type

Binary String

SSLAcceptServerCertStorePassword Property (PSMTP Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

psmtpcontrol.SSLAcceptServerCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLAcceptServerCertStoreType Property (PSMTP Control)

The type of certificate store for this certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLAcceptServerCertSubjectAltNames Property (PSMTP Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintMD5 Property (PSMTP Control)

The MD5 hash of the certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA1 Property (PSMTP Control)

The SHA-1 hash of the certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA256 Property (PSMTP Control)

The SHA-256 hash of the certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsage Property (PSMTP Control)

The text description of UsageFlags .

Syntax

psmtpcontrol.SSLAcceptServerCertUsage

Default Value

""

Remarks

The text description of SSLAcceptServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsageFlags Property (PSMTP Control)

The flags that show intended use for the certificate.

Syntax

psmtpcontrol.SSLAcceptServerCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:

Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertVersion Property (PSMTP Control)

The certificate's version number.

Syntax

psmtpcontrol.SSLAcceptServerCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLAcceptServerCertSubject Property (PSMTP Control)

The subject of the certificate used for client authentication.

Syntax

psmtpcontrol.SSLAcceptServerCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLAcceptServerCertEncoded Property (PSMTP Control)

The certificate (PEM/Base64 encoded).

Syntax

psmtpcontrol.SSLAcceptServerCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLCertEffectiveDate Property (PSMTP Control)

The date on which this certificate becomes valid.

Syntax

psmtpcontrol.SSLCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLCertExpirationDate Property (PSMTP Control)

The date on which the certificate expires.

Syntax

psmtpcontrol.SSLCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLCertExtendedKeyUsage Property (PSMTP Control)

A comma-delimited list of extended key usage identifiers.

Syntax

psmtpcontrol.SSLCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLCertFingerprint Property (PSMTP Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

psmtpcontrol.SSLCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLCertFingerprintSHA1 Property (PSMTP Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

psmtpcontrol.SSLCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLCertFingerprintSHA256 Property (PSMTP Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

psmtpcontrol.SSLCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLCertIssuer Property (PSMTP Control)

The issuer of the certificate.

Syntax

psmtpcontrol.SSLCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLCertPrivateKey Property (PSMTP Control)

The private key of the certificate (if available).

Syntax

psmtpcontrol.SSLCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLCertPrivateKeyAvailable Property (PSMTP Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

psmtpcontrol.SSLCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLCertPrivateKeyContainer Property (PSMTP Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

psmtpcontrol.SSLCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLCertPublicKey Property (PSMTP Control)

The public key of the certificate.

Syntax

psmtpcontrol.SSLCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLCertPublicKeyAlgorithm Property (PSMTP Control)

The textual description of the certificate's public key algorithm.

Syntax

psmtpcontrol.SSLCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertPublicKeyLength Property (PSMTP Control)

The length of the certificate's public key (in bits).

Syntax

psmtpcontrol.SSLCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLCertSerialNumber Property (PSMTP Control)

The serial number of the certificate encoded as a string.

Syntax

psmtpcontrol.SSLCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLCertSignatureAlgorithm Property (PSMTP Control)

The text description of the certificate's signature algorithm.

Syntax

psmtpcontrol.SSLCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertStore Property (PSMTP Control)

The name of the certificate store for the client certificate.

Syntax

psmtpcontrol.SSLCertStore[=string]

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password-protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertStoreB.

Data Type

Binary String

SSLCertStorePassword Property (PSMTP Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

psmtpcontrol.SSLCertStorePassword[=string]

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (PSMTP Control)

The type of certificate store for this certificate.

Syntax

psmtpcontrol.SSLCertStoreType[=integer]

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubjectAltNames Property (PSMTP Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

psmtpcontrol.SSLCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLCertThumbprintMD5 Property (PSMTP Control)

The MD5 hash of the certificate.

Syntax

psmtpcontrol.SSLCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA1 Property (PSMTP Control)

The SHA-1 hash of the certificate.

Syntax

psmtpcontrol.SSLCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA256 Property (PSMTP Control)

The SHA-256 hash of the certificate.

Syntax

psmtpcontrol.SSLCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertUsage Property (PSMTP Control)

The text description of UsageFlags .

Syntax

psmtpcontrol.SSLCertUsage

Default Value

""

Remarks

The text description of SSLCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLCertUsageFlags Property (PSMTP Control)

The flags that show intended use for the certificate.

Syntax

psmtpcontrol.SSLCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:

Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLCertVersion Property (PSMTP Control)

The certificate's version number.

Syntax

psmtpcontrol.SSLCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLCertSubject Property (PSMTP Control)

The subject of the certificate used for client authentication.

Syntax

psmtpcontrol.SSLCertSubject[=string]

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLCertEncoded Property (PSMTP Control)

The certificate (PEM/Base64 encoded).

Syntax

psmtpcontrol.SSLCertEncoded[=string]

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertEncodedB.

This property is not available at design time.

Data Type

Binary String

SSLEnabled Property (PSMTP Control)

This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.

Syntax

psmtpcontrol.SSLEnabled[=boolean]

Default Value

False

Remarks

This property specifies whether TLS/SSL is enabled in the control. When False (default), the control operates in plaintext mode. When True, TLS/SSL is enabled.

TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.

This property is not available at design time.

Data Type

Boolean

SSLProvider Property (PSMTP Control)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

psmtpcontrol.SSLProvider[=integer]

Possible Values

sslpAutomatic(0), 
sslpPlatform(1), 
sslpInternal(2)

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the control will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The control will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

Data Type

Integer

SSLServerCertEffectiveDate Property (PSMTP Control)

The date on which this certificate becomes valid.

Syntax

psmtpcontrol.SSLServerCertEffectiveDate

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExpirationDate Property (PSMTP Control)

The date on which the certificate expires.

Syntax

psmtpcontrol.SSLServerCertExpirationDate

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExtendedKeyUsage Property (PSMTP Control)

A comma-delimited list of extended key usage identifiers.

Syntax

psmtpcontrol.SSLServerCertExtendedKeyUsage

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLServerCertFingerprint Property (PSMTP Control)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

psmtpcontrol.SSLServerCertFingerprint

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA1 Property (PSMTP Control)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

psmtpcontrol.SSLServerCertFingerprintSHA1

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA256 Property (PSMTP Control)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

psmtpcontrol.SSLServerCertFingerprintSHA256

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLServerCertIssuer Property (PSMTP Control)

The issuer of the certificate.

Syntax

psmtpcontrol.SSLServerCertIssuer

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLServerCertPrivateKey Property (PSMTP Control)

The private key of the certificate (if available).

Syntax

psmtpcontrol.SSLServerCertPrivateKey

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLServerCertPrivateKeyAvailable Property (PSMTP Control)

Whether a PrivateKey is available for the selected certificate.

Syntax

psmtpcontrol.SSLServerCertPrivateKeyAvailable

Default Value

False

Remarks

Whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLServerCertPrivateKeyContainer Property (PSMTP Control)

The name of the PrivateKey container for the certificate (if available).

Syntax

psmtpcontrol.SSLServerCertPrivateKeyContainer

Default Value

""

Remarks

The name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLServerCertPublicKey Property (PSMTP Control)

The public key of the certificate.

Syntax

psmtpcontrol.SSLServerCertPublicKey

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyAlgorithm Property (PSMTP Control)

The textual description of the certificate's public key algorithm.

Syntax

psmtpcontrol.SSLServerCertPublicKeyAlgorithm

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyLength Property (PSMTP Control)

The length of the certificate's public key (in bits).

Syntax

psmtpcontrol.SSLServerCertPublicKeyLength

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLServerCertSerialNumber Property (PSMTP Control)

The serial number of the certificate encoded as a string.

Syntax

psmtpcontrol.SSLServerCertSerialNumber

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLServerCertSignatureAlgorithm Property (PSMTP Control)

The text description of the certificate's signature algorithm.

Syntax

psmtpcontrol.SSLServerCertSignatureAlgorithm

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertStore Property (PSMTP Control)

The name of the certificate store for the client certificate.

Syntax

psmtpcontrol.SSLServerCertStore

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password-protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertStoreB.

This property is read-only.

Data Type

Binary String

SSLServerCertStorePassword Property (PSMTP Control)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

psmtpcontrol.SSLServerCertStorePassword

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

SSLServerCertStoreType Property (PSMTP Control)

The type of certificate store for this certificate.

Syntax

psmtpcontrol.SSLServerCertStoreType

Possible Values

cstUser(0), 
cstMachine(1), 
cstPFXFile(2), 
cstPFXBlob(3), 
cstJKSFile(4), 
cstJKSBlob(5), 
cstPEMKeyFile(6), 
cstPEMKeyBlob(7), 
cstPublicKeyFile(8), 
cstPublicKeyBlob(9), 
cstSSHPublicKeyBlob(10), 
cstP7BFile(11), 
cstP7BBlob(12), 
cstSSHPublicKeyFile(13), 
cstPPKFile(14), 
cstPPKBlob(15), 
cstXMLFile(16), 
cstXMLBlob(17), 
cstJWKFile(18), 
cstJWKBlob(19), 
cstSecurityKey(20), 
cstBCFKSFile(21), 
cstBCFKSBlob(22), 
cstPKCS11(23), 
cstAuto(99)

Default Value

0

Remarks

The type of certificate store for this certificate.

The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

Integer

SSLServerCertSubjectAltNames Property (PSMTP Control)

Comma-separated lists of alternative subject names for the certificate.

Syntax

psmtpcontrol.SSLServerCertSubjectAltNames

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLServerCertThumbprintMD5 Property (PSMTP Control)

The MD5 hash of the certificate.

Syntax

psmtpcontrol.SSLServerCertThumbprintMD5

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA1 Property (PSMTP Control)

The SHA-1 hash of the certificate.

Syntax

psmtpcontrol.SSLServerCertThumbprintSHA1

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA256 Property (PSMTP Control)

The SHA-256 hash of the certificate.

Syntax

psmtpcontrol.SSLServerCertThumbprintSHA256

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertUsage Property (PSMTP Control)

The text description of UsageFlags .

Syntax

psmtpcontrol.SSLServerCertUsage

Default Value

""

Remarks

The text description of SSLServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLServerCertUsageFlags Property (PSMTP Control)

The flags that show intended use for the certificate.

Syntax

psmtpcontrol.SSLServerCertUsageFlags

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:

Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLServerCertVersion Property (PSMTP Control)

The certificate's version number.

Syntax

psmtpcontrol.SSLServerCertVersion

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLServerCertSubject Property (PSMTP Control)

The subject of the certificate used for client authentication.

Syntax

psmtpcontrol.SSLServerCertSubject

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

SSLServerCertEncoded Property (PSMTP Control)

The certificate (PEM/Base64 encoded).

Syntax

psmtpcontrol.SSLServerCertEncoded

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertEncodedB.

This property is read-only and not available at design time.

Data Type

Binary String

SSLStartMode Property (PSMTP Control)

This property determines how the control starts the Secure Sockets Layer (SSL) negotiation.

Syntax

psmtpcontrol.SSLStartMode[=integer]

Possible Values

sslAutomatic(0), 
sslImplicit(1), 
sslExplicit(2), 
sslNone(3)

Default Value

3

Remarks

The SSLStartMode property may have one of the following values:

Data Type

Integer

Subject Property (PSMTP Control)

This property includes the subject of the mail message (optional).

Syntax

psmtpcontrol.Subject[=string]

Default Value

""

Remarks

The string in this property is sent with a Subject SMTP header to the mail recipient.

If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.

Data Type

String

Timeout Property (PSMTP Control)

The timeout for the control.

Syntax

psmtpcontrol.Timeout[=integer]

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the control will wait for the operation to complete before returning control.

The control will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the control fails with an error.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

User Property (PSMTP Control)

This property includes the user identifier needed to log in as in the MailServer .

Syntax

psmtpcontrol.User[=string]

Default Value

""

Remarks

If this property is set to a nonempty string, then when connecting to the MailServer an AUTH or CRAM-MD5 (depending on the value of AuthMechanism) command is sent to provide authentication information for the user.

This property is not available at design time.

Data Type

String

Config Method (PSMTP Control)

Sets or retrieves a configuration setting.

Syntax

psmtpcontrol.Config ConfigurationString

Remarks

Config is a generic method available in every control. It is used to set and retrieve configuration settings for the control.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (PSMTP Control)

This method connects to the mail relay and sends the SMTP HELO command.

Syntax

psmtpcontrol.Connect 

Remarks

This method connects to the mail relay and sends the SMTP HELO command, thus preparing to send messages. Any number of messages can later be sent using the Send method.

Example. Connecting and Sending an Email:

control.MailServer = "MyServer" control.From = "me@server.com" control.SendTo = "recipient@server.com" control.Subject = "My Subject" control.MessageText = "This is the message body" control.Connect() control.Send() control.Disconnect()

Disconnect Method (PSMTP Control)

This method disconnects from the SMTP server.

Syntax

psmtpcontrol.Disconnect 

Remarks

This method disconnects from the mail relay.

DoEvents Method (PSMTP Control)

This method processes events from the internal message queue.

Syntax

psmtpcontrol.DoEvents 

Remarks

When DoEvents is called, the control processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Encrypt Method (PSMTP Control)

Encrypts the message.

Syntax

psmtpcontrol.Encrypt 

Remarks

This method encrypts the specified message.

The message is encrypted with the public keys specified in RecipientKeys.

When encrypting, the following properties may be used to further configure the control:

• CompressionMethod
• EncryptingAlgorithm

Expand Method (PSMTP Control)

This method asks the MailServer to expand a name or mailing list.

Syntax

psmtpcontrol.Expand EmailAddress

Remarks

This method asks the MailServer to expand a name or mailing list. The resulting response is provided in one or more Expand events (one for each address). The control will try to connect to the mail relay if it is not already connected.

Interrupt Method (PSMTP Control)

This method interrupts the current method.

Syntax

psmtpcontrol.Interrupt 

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ProcessQueue Method (PSMTP Control)

This method sends the messages that previously have been queued into QueueDir .

Syntax

psmtpcontrol.ProcessQueue QueueDir

Remarks

This method sends the messages that previously have been queued into QueueDir. The PITrail event shows the interaction with the server as messages are processed.

This method looks in the directory for files with the extension ".queued" and starts processing them.

When processing starts, the file extension is changed to ".sending". If an error happens at this stage, the sending process is aborted, and the file extension is changed to ".failed".

If the file is successfully sent, the file is normally deleted, unless the KeepQueue configuration setting is set to True, in which case the file extension is instead changed to ".sent" and the queue file is not deleted.

Queue Method (PSMTP Control)

This method queues the message into QueueDir .

Syntax

psmtpcontrol.Queue QueueDir

Remarks

This method queues the message into QueueDir. The message is queued into a unique file into the directory QueueDir for future processing.

QueueDir must already exist, or an error will be generated. Alternatively, QueueDir may be set to "*" to return the result as a string instead of writing it to a file.

This method returns the name of the unique queue file created in QueueDir. The file extension is ".queued".

Please refer to the ProcessQueue method for more information on email queue processing.

ResetHeaders Method (PSMTP Control)

This method resets all the message headers to empty.

Syntax

psmtpcontrol.ResetHeaders 

Remarks

This method resets all the message headers to "" (empty string). Use this method before creating a new message, so that headers from the previous message are not carried over to the next one.

Send Method (PSMTP Control)

This method sends the current message.

Syntax

psmtpcontrol.Send 

Remarks

This method sends the current message. If the control is not connected to the mail relay, a connection is created, the message is sent, and then the connection is closed unless an error occurs.

If the control is already connected (by use of the Connect method), the connection will remain open after the message is sent. To disconnect, call the Disconnect method.

Example. Send an Email:

SMTPControl.MailServer = "MyServer" SMTPControl.From = "me@server.com" SMTPControl.SendTo = "recipient@server.com" SMTPControl.Subject = "My Subject" SMTPControl.MessageText = "This is the message body" SMTPControl.Send()

SendCommand Method (PSMTP Control)

This method sends the exact command directly to the server.

Syntax

psmtpcontrol.SendCommand Command

Remarks

This method sends the command specified by Command to the server exactly as it is provided. Use this method to send additional or custom commands directly to the server.

After calling this method, check the LastReply property or monitor the PITrail event to obtain the server's response.

SendToTerminalAndEmail Method (PSMTP Control)

This method sends to terminal and email.

Syntax

psmtpcontrol.SendToTerminalAndEmail 

Remarks

This method is similar to Send but requests also that the message is sent to the terminal of the users as well, if they are logged on and accept terminal messages. This method requires that AllowExtensions is set to True and is not supported by all mail relays.

SendToTerminalOnly Method (PSMTP Control)

This method sends to terminal only.

Syntax

psmtpcontrol.SendToTerminalOnly 

Remarks

This method is similar to Send but requests instead that the message is sent to the user's terminal. An error with the server's response happens if the user is not logged in or does not accept terminal messages. This method requires that AllowExtensions is set to True and is not supported by all mail relays.

SendToTerminalOrEmail Method (PSMTP Control)

This method sends to terminal or email.

Syntax

psmtpcontrol.SendToTerminalOrEmail 

Remarks

This method is similar to Send but requests instead that the message is first sent to the user's terminal. If the user is not logged in or does not accept terminal messages, the message is sent to his or her mailbox. This method requires that AllowExtensions is set to True and is not supported by all mail relays.

Sign Method (PSMTP Control)

Signs the message.

Syntax

psmtpcontrol.Sign 

Remarks

This method signs the specified message.

The message is signed with the private key specified in Keys.

When signing, the following properties may be used to further configure the control:

• ClearSignature
• SigningAlgorithm

SignAndEncrypt Method (PSMTP Control)

Signs and encrypts the current message.

Syntax

psmtpcontrol.SignAndEncrypt 

Remarks

This method signs and encrypts the specified message.

The message is encrypted with the public keys specified in RecipientKeys and signed with the private key specified in Keys.

When encrypting, the following properties may be used to further configure the control:

• CompressionMethod
• EncryptingAlgorithm

When signing, the following properties may be used to further configure the control:

• ClearSignature
• SigningAlgorithm

Verify Method (PSMTP Control)

This method sends a verification request to the SMTP server.

Syntax

psmtpcontrol.Verify EmailAddress

Remarks

This method asks the MailServer to verify the email address provided in the 'EmailAddress' parameter.

ConnectionStatus Event (PSMTP Control)

Fired to indicate changes in the connection state.

Syntax

Sub psmtpcontrol_ConnectionStatus(ConnectionEvent As String, StatusCode As Integer, Description As String)

Remarks

This event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

EndTransfer Event (PSMTP Control)

This event is fired when the message text completes transferring.

Syntax

Sub psmtpcontrol_EndTransfer(Direction As Integer)

Remarks

If MessageText is not empty, the EndTransfer event is fired when the MessageText finishes transferring from the local host to the MailServer. If MessageText is empty, the event is not fired.

If a file is attached to the MessageText via the AttachedFile property, then EndTransfer fires again when the file finishes transferring. For more information, go to the description of the AttachedFile property.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (PSMTP Control)

Fired when information is available about errors during data delivery.

Syntax

Sub psmtpcontrol_Error(ErrorCode As Integer, Description As String)

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the control fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Expand Event (PSMTP Control)

This event is fired for every email address returned by the server when the Expand method is called.

Syntax

Sub psmtpcontrol_Expand(Address As String)

Remarks

This event is fired for every email address as returned by the mail server when the Expand method is called.

The Address parameter may contain a name and an email address, or just an email address, suitable for any of the addressing properties.

KeyPassphrase Event (PSMTP Control)

Fired if the passphrase of current key is incorrect or empty.

Syntax

Sub psmtpcontrol_KeyPassphrase(UserId As String, KeyId As String, Fingerprint As String, Passphrase As String)

Remarks

This event fires when the passphrase for the key is required. The passphrase must be specified before operations requiring the secret key are attempted. The passphrase may be supplied by setting the Passphrase parameter in this event, or by specifying the KeyPassphrase property before attempting the operation.

The passphrase is required when using the following methods in KeyMgr:

• AddUserId
• SignUserId
• ChangeExpirationDate
• ChangePassphrase

When using the OpenPGP control, or an email-based control, the following methods require a passphrase for the key:

• Decrypt
• Sign
• SignAndEncrypt

UserId holds the user Id of the key the passphrase is required for.

The UserId format is:

FirstName LastName (Comment) <Email>

Note that for OpenPGP v6, a key may be created with or without a UserId, as the field is optional. If a key was created without a UserId, the key's Fingerprint can be used as it's identifier instead.

KeyId is the hex-encoded, 4-byte or 8-byte Id of the key the passphrase is required for. For OpenPGP v4 keys and earlier, the key Id corresponds to the last 4 or 8 bytes of the key's Fingerprint. For OpenPGP v6 keys, the key Id corresponds to the first 8 bytes of the key's Fingerprint instead. For instance:

5E70662EA810E768

Fingerprint holds the hex-encoded, 20-byte fingerprint of the key the passphrase is required for. This is in the form:

5E70662EA810E768391A2FE8F7B7D49C89C9D7B1

PITrail Event (PSMTP Control)

This event traces the commands sent to the mail server, and the respective replies.

Syntax

Sub psmtpcontrol_PITrail(Direction As Integer, Message As String)

Remarks

The PITrail event is useful for debugging purposes. It shows all of the interaction between the client and the server, line by line, except for message header and body transfers.

The Message parameter contains the full text of the message. The Direction parameter shows the originator of the message:

Progress Event (PSMTP Control)

Fired as progress is made.

Syntax

Sub psmtpcontrol_Progress(BytesProcessed As Long64, PercentProcessed As Integer)

Remarks

This event is fired automatically as data is processed by the control.

The PercentProcessed parameter indicates the current status of the operation.

The BytesProcessed parameter holds the total number of bytes processed so far.

SSLServerAuthentication Event (PSMTP Control)

Fired after the server presents its certificate to the client.

Syntax

Sub psmtpcontrol_SSLServerAuthentication(CertEncoded As String, CertSubject As String, CertIssuer As String, Status As String, Accept As Boolean)

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (PSMTP Control)

Fired when secure connection progress messages are available.

Syntax

Sub psmtpcontrol_SSLStatus(Message As String)

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (PSMTP Control)

This event is fired when the message text starts transferring.

Syntax

Sub psmtpcontrol_StartTransfer(Direction As Integer)

Remarks

If MessageText is not empty, the StartTransfer event is fired when the MessageText starts transferring from the local host to the MailServer. If MessageText is empty, the event is not fired.

If a file is attached to the MessageText via the AttachedFile property, then StartTransfer fires again when the file starts transferring. Please go to the description of the AttachedFile property for more information.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Status Event (PSMTP Control)

Shows the progress of the operation.

Syntax

Sub psmtpcontrol_Status(Message As String)

Remarks

The event is fired for informational and logging purposes only. It may be used to track the progress of an operation.

The level of detail is controlled by the LogLevel setting.

Transfer Event (PSMTP Control)

This event is fired when the message text is transferred to MailServer .

Syntax

Sub psmtpcontrol_Transfer(Direction As Integer, BytesTransferred As Long64, PercentDone As Integer, Text As String)

Remarks

One or more Transfer events are fired during message delivery. Messages consist of MessageText and an optional AttachedFile. The BytesTransferred parameter shows the number of bytes sent starting from the beginning of MessageText or AttachedFile.

Text contains the current portion of the message being sent.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Config Settings (PSMTP Control)

PSMTP Config Settings

SMTP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

Trappable Errors (PSMTP Control)

SMTP Errors

The control may also return one of the following error codes, which are inherited from other controls.

TCPClient Errors

SSL Errors

TCP/IP Errors

OpenPGP Errors