SCP Class

Properties Methods Events Config Settings Errors

The SCP class can be used to transfer files to and from SSH servers using the Secure Copy Protocol (SCP).

Syntax

ipworksssh.Scp

Remarks

The SCP class is the SSH-enabled equivalent of the IPWorks RCP class. The SSHHost and SSHPort properties specify the SSH server to use. The SSHUser and SSHPassword properties allow the client to authenticate itself with the server. The SSHServerAuthentication event and/or SSHAcceptServerHostKey property allow you to check the server identity. Finally, the SSHStatus event provides information about the SSH handshake.

The SCP class implements a standard SCP File Transfer client.

The first step in using the class is specifying the SSHHost, SSHUser and SSHPassword. The file to upload to or download from is given by the RemoteFile property. The file to download to or upload from is specified by LocalFile.

If LocalFile is set to something other than an empty string, then files are received in LocalFile, otherwise the data is received through the Transfer event. StartTransfer and EndTransfer are fired at the beginning and end of transmission.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.


Connected	This shows whether the class is connected.
FilePermissions	The file permissions for the RemoteFile .
Firewall	A set of properties related to firewall access.
LocalFile	The path to a local file for upload/download.
LocalHost	The name of the local host or user-assigned IP interface through which connections are initiated or accepted.
LocalPort	The TCP port in the local host where the class binds.
Overwrite	Whether or not the class should overwrite files during transfer.
RemoteFile	The name of the remote file for uploading, downloading, etc.
RemotePath	The remote path on the server.
SSHAcceptServerHostKey	Instructs the class to accept the server host key that matches the supplied key.
SSHAuthMode	The authentication method to be used the class when calling SSHLogon .
SSHCert	A certificate to be used for authenticating the SSHUser .
SSHCompressionAlgorithms	A comma-separated list containing all allowable compression algorithms.
SSHEncryptionAlgorithms	A comma-separated list containing all allowable encryption algorithms.
SSHHost	The address of the SSH host.
SSHPassword	The password for SSH password-based authentication.
SSHPort	The port on the SSH server where the SSH service is running; by default, 22.
SSHUser	The username for SSH authentication.
Timeout	A timeout for the class.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.


Config	Sets or retrieves a configuration setting.
DecodePacket	Decodes a hex-encoded SSH packet.
DoEvents	Processes events from the internal message queue.
Download	Download a RemoteFile from an SCP server.
EncodePacket	Hex encodes an SSH packet.
GetSSHParam	Used to read a field from an SSH packet's payload.
GetSSHParamBytes	Used to read a field from an SSH packet's payload.
Interrupt	Interrupt the current method.
Reset	Reset the class.
SetDownloadStream	Sets the stream to which the downloaded data from the server will be written.
SetSSHParam	Used to write a field to the end of a payload.
SetUploadStream	Sets the stream from which the class will read data to upload to the server.
SSHLogoff	Logoff from the SSH server.
SSHLogon	Logon to the SSHHost using the current SSHUser and SSHPassword .
Upload	Upload a file specified by LocalFile to an SCP server.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.


Connected	This event is fired immediately after a connection completes (or fails).
ConnectionStatus	This event is fired to indicate changes in the connection state.
Disconnected	This event is fired when a connection is closed.
EndTransfer	Fired when a file completes downloading/uploading.
Error	Information about errors during data delivery.
Log	Fires once for each log message.
SSHCustomAuth	Fired when the class is doing custom authentication.
SSHKeyboardInteractive	Fired when the class receives a request for user input from the server.
SSHServerAuthentication	Fired after the server presents its public key to the client.
SSHStatus	Shows the progress of the secure connection.
StartTransfer	Fired when a file starts downloading/uploading.
Transfer	Fired during file download/upload.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.


DirectoryPermissions	The permissions of folders created on the remote host.
LastAccessedTime	The last accessed time of the remote file.
LastModifiedTime	The last modified time of the remote file.
PreserveFileTime	Preserves the file's modified time during transfer.
RecursiveMode	If set to true the class will recursively upload or download files.
ServerResponseWindow	The time to wait for a server response in milliseconds.
ChannelDataEOL[ChannelId]	Used to break the incoming data stream into chunks.
ChannelDataEOLFound[ChannelId]	Determines if ChannelDataEOL was found.
ClientSSHVersionString	The SSH version string used by the class.
EnablePageantAuth	Whether to use a key stored in Pageant to perform client authentication.
KerberosDelegation	If true, asks for credentials with delegation enabled during authentication.
KerberosRealm	The fully qualified domain name of the Kerberos Realm to use for GSSAPI authentication.
KerberosSPN	The Kerberos Service Principal Name of the SSH host.
KeyRenegotiationThreshold	Sets the threshold for the SSH Key Renegotiation.
LogLevel	Specifies the level of detail that is logged.
MaxChannelDataLength[ChannelId]	The maximum amount of data to accumulate when no ChannelDataEOL is found.
MaxPacketSize	The maximum packet size of the channel, in bytes.
MaxWindowSize	The maximum window size allowed for the channel, in bytes.
NegotiatedStrictKex	Returns whether strict key exchange was negotiated to be used.
PasswordPrompt	The text of the password prompt used in keyboard-interactive authentication.
PreferredDHGroupBits	The size (in bits) of the preferred modulus (p) to request from the server.
RecordLength	The length of received data records.
ServerSSHVersionString	The remote host's SSH version string.
SignedSSHCert	The CA signed client public key used when authenticating.
SSHAcceptAnyServerHostKey	If set the class will accept any key presented by the server.
SSHAcceptServerCAKey	The CA public key that signed the server's host key.
SSHAcceptServerHostKeyFingerPrint	The fingerprint of the server key to accept.
SSHFingerprintHashAlgorithm	The algorithm used to calculate the fingerprint.
SSHFingerprintMD5	The server hostkey's MD5 fingerprint.
SSHFingerprintSHA1	The server hostkey's SHA1 fingerprint.
SSHFingerprintSHA256	The server hostkey's SHA256 fingerprint.
SSHKeepAliveCountMax	The maximum number of keep alive packets to send without a response.
SSHKeepAliveInterval	The interval between keep alive packets.
SSHKeyExchangeAlgorithms	Specifies the supported key exchange algorithms.
SSHKeyRenegotiate	Causes the class to renegotiate the SSH keys.
SSHMacAlgorithms	Specifies the supported Mac algorithms.
SSHPubKeyAuthSigAlgorithms	Specifies the enabled signature algorithms that may be used when attempting public key authentication.
SSHPublicKeyAlgorithms	Specifies the supported public key algorithms for the server's public key.
SSHVersionPattern	The pattern used to match the remote host's version string.
TryAllAvailableAuthMethods	If set to true, the class will try all available authentication methods.
UseStrictKeyExchange	Specifies how strict key exchange is supported.
WaitForChannelClose	Whether to wait for channels to be closed before disconnected.
WaitForServerDisconnect	Whether to wait for the server to close the connection.
CloseStreamAfterTransfer	If true, the class will close the upload or download stream after the transfer.
ConnectionTimeout	Sets a separate timeout value for establishing a connection.
FirewallAutoDetect	Tells the class whether or not to automatically detect and use firewall system settings, if available.
FirewallHost	Name or IP address of firewall (optional).
FirewallListener	If true, the class binds to a SOCKS firewall as a server (TCPClient only).
FirewallPassword	Password to be used if authentication is to be used when connecting through the firewall.
FirewallPort	The TCP port for the FirewallHost;.
FirewallType	Determines the type of firewall to connect through.
FirewallUser	A user name if authentication is to be used connecting through a firewall.
KeepAliveInterval	The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTime	The inactivity time in milliseconds before a TCP keep-alive packet is sent.
Linger	When set to True, connections are terminated gracefully.
LingerTime	Time in seconds to have the connection linger.
LocalHost	The name of the local host through which connections are initiated or accepted.
LocalPort	The port in the local host where the class binds.
MaxLineLength	The maximum amount of data to accumulate when no EOL is found.
MaxTransferRate	The transfer rate limit in bytes per second.
ProxyExceptionsList	A semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAlive	Determines whether or not the keep alive socket option is enabled.
TcpNoDelay	Whether or not to delay when sending packets.
UseIPv6	Whether to use IPv6.
UseNTLMv2	Whether to use NTLM V2.
AbsoluteTimeout	Determines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallData	Used to send extra data to the firewall.
InBufferSize	The size in bytes of the incoming queue of the socket.
OutBufferSize	The size in bytes of the outgoing queue of the socket.
BuildInfo	Information about the product's build.
GUIAvailable	Whether or not a message loop is available for processing events.
LicenseInfo	Information about the current license.
MaskSensitive	Whether sensitive data is masked in log messages.
UseDaemonThreads	Whether threads created by the class are daemon threads.
UseFIPSCompliantAPI	Tells the class whether or not to use FIPS certified APIs.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

Connected Property (SCP Class)

This shows whether the class is connected.

Syntax


public boolean isConnected();


public void setConnected(boolean connected);

Default Value

False

Remarks

This property is used to determine whether or not the class is connected to the remote host.

Note: It is recommended to use the Connect or Disconnect method instead of setting this property.

This property is not available at design time.

FilePermissions Property (SCP Class)

The file permissions for the RemoteFile .

Syntax


public String getFilePermissions();


public void setFilePermissions(String filePermissions);

Default Value

"0600"

Remarks

This property defines the permissions that will be assigned to the RemoteFile after an upload. The value is a four digit octal value. This is the same format that is used with the Unix chmod command. The default value of "0600" gives read/write permissions to the file's owner.

The last three octal digits are the most significant and represent, in order, the file access capabilities of the file's owner, the owner's group and other users. Each of these octal digits is, on its own, a 3-bit bitmask with the following possible values:


1 (`001`)	Execute
2 (`010`)	Write
4 (`100`)	Read

An octal permission digit of 7 would have all three values set and would mean that the file can be read, written and executed by that user class. For example, the octal permissions "100644" would have a value "6" for the owner, "4" for the group, and "4" for other users. This would be interpreted to mean that all users can read the file, no users can execute it and only the owner can write it. The permissions "40755" would mean that all users can read and execute the file, but only the owner can write it.

The previous octal digit is another bitmask with the following values:


1 (`001`)	Sticky Bit - retain the file in memory for performance
2 (`010`)	Set GID - sets the group ID of the process to the file's group ID upon execution (only for executable files)
4 (`100`)	Set UID - sets the user ID of the process to the file's user ID upon execution (only for executable files)

Note: Not all servers support setting permissions after an upload.

Firewall Property (SCP Class)

A set of properties related to firewall access.

Syntax


public Firewall getFirewall();


public void setFirewall(Firewall firewall);

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the class will attempt to connect.

Please refer to the Firewall type for a complete list of fields.

LocalFile Property (SCP Class)

The path to a local file for upload/download.

Syntax


public String getLocalFile();


public void setLocalFile(String localFile);

Default Value

Remarks

The LocalFile property is used by the Upload and Download methods. The file will only be overwritten if the Overwrite property is set to True.

Example (Setting LocalFile)

SCPControl.Localfile = "C:\localfile.txt" SCPControl.RemoteFile = "remotefile.txt" SCPControl.Download() SCPControl.Localfile = "C:\localfile2.txt" SCPControl.RemoteFile = "folder/remotefile2.txt" SCPControl.Upload()

Multiple file uploads and downloads are supported through the use of filemasks.

To upload files matching a filemask set LocalFile to a local path including a filemask. Set RemotePath to the directory on the server where the files will be uploaded. In this case RemoteFile is ignored. All matching files will be upload when Upload is called. The StartTransfer, Transfer, and EndTransfer events provide details about the individual file transfers.

To download files matching a filemask set RemoteFile to a filemask. The path may be specified as part of the value in RemoteFile or may be set separately in RemotePath. LocalFile should be set to a local directory where files will be downloaded. When Download is called all matching files are downloaded. The StartTransfer, Transfer, and EndTransfer events provide details about the individual file transfers. In the event an individual file fails to transfer the Error event will fire.

LocalHost Property (SCP Class)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax


public String getLocalHost();


public void setLocalHost(String localHost);

Default Value

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

LocalPort Property (SCP Class)

The TCP port in the local host where the class binds.

Syntax


public int getLocalPort();


public void setLocalPort(int localPort);

Default Value

Remarks

This property must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.

Setting this property to 0 (default) enables the system to choose an open port at random. The chosen port will be returned by the LocalPort property after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this property when a connection is active will generate an error.

This property is useful when trying to connect to services that require a trusted port in the client side.

Overwrite Property (SCP Class)

Whether or not the class should overwrite files during transfer.

Syntax


public boolean isOverwrite();


public void setOverwrite(boolean overwrite);

Default Value

False

Remarks

This property is a value indicating whether or not the class should overwrite LocalFile when downloading. If Overwrite is false, an error will be thrown whenever LocalFile exists before a download operation.

RemoteFile Property (SCP Class)

The name of the remote file for uploading, downloading, etc.

Syntax


public String getRemoteFile();


public void setRemoteFile(String remoteFile);

Default Value

Remarks

The RemoteFile is either an absolute file path, or a relative path based on the server current directory.

A number of methods use RemoteFile as an argument.

Example (Setting RemoteFile)

The remote path may be specified as part of value supplied here, or separately in RemotePath.

Multiple file uploads and downloads are supported through the use of filemasks.

RemotePath Property (SCP Class)

The remote path on the server.

Syntax


public String getRemotePath();


public void setRemotePath(String remotePath);

Default Value

Remarks

The RemotePath is either an absolute file path, or a relative path based on the server current directory.

This property specifies the remote path on the server when uploading or downloading.

This is required when using a filemask to upload multiple files.

In all other cases it is optional and path information may instead be specified in RemoteFile. If this is set, it is combined with RemoteFile to form a complete path to the file.

Multiple file uploads and downloads are supported through the use of filemasks.

SSHAcceptServerHostKey Property (SCP Class)

Instructs the class to accept the server host key that matches the supplied key.

Syntax


public Certificate getSSHAcceptServerHostKey();


public void setSSHAcceptServerHostKey(Certificate SSHAcceptServerHostKey);

Remarks

If the host key that will be used by the server is known in advance, this property may be set to accept the expected key. Otherwise the SSHServerAuthentication event should be trapped, and the key should be accepted or refused in the event.

If this property is not set and the SSHServerAuthentication event is not trapped, the server will not be authenticated and the connection will be terminated by the client.

Please refer to the Certificate type for a complete list of fields.

SSHAuthMode Property (SCP Class)

The authentication method to be used the class when calling SSHLogon .

Syntax


public int getSSHAuthMode();


public void setSSHAuthMode(int SSHAuthMode);


Enumerated values:
  public final static int amNone = 0;
  public final static int amMultiFactor = 1;
  public final static int amPassword = 2;
  public final static int amPublicKey = 3;
  public final static int amKeyboardInteractive = 4;
  public final static int amGSSAPIWithMic = 5;
  public final static int amCustom = 6;
  public final static int amGSSAPIKeyex = 7;

Default Value

Remarks

The SSH Authentication specification (RFC 4252) specifies multiple methods by which a user can be authenticated by an SSH server. When a call is made to SSHLogon, the class will connect to the SSH server and establish the security layer. After the connection has been secured, the client will send an authentication request to the SSHHost containing the SSHUser. The server will respond containing a list of methods by which that user may be authenticated.

The class will attempt to authenticate the user by one of those methods based on the value of SSHAuthMode and other property values supplied by the user. Currently, the class supports the following authentication methods:


`amNone` (0)	No authentication will be performed. The current SSHUser value is ignored, and the connection will be logged in as anonymous.
`amMultiFactor` (1)	This allows the class to attempt a multi-step authentication process. The class will send authentication data to the server based on the list of methods allowed for the current user and the authentication property values supplied. The class will continue to send authentication data until the server acknowledges authentication success. If the server rejects an authentication step, the class throws an exception.
`amPassword` (2)	The class will use the values of SSHUser and SSHPassword to authenticate the user.
`amPublicKey` (3)	The class will use the values of SSHUser and SSHCert to authenticate the user. SSHCert must have a private key available for this authentication method to succeed.
`amKeyboardInteractive` (4)	At the time of authentication, the class will fire the SSHKeyboardInteractive event containing instructions on how to complete the authentication step. (NOTE: `amKeyboardInteractive` is not supported in SSHTunnel).
`amGSSAPIWithMic` (5)	This allows the class to attempt Kerberos authentication using the GSSAPI-WITH-MIC scheme. The client will try Kerberos authentication using the value of SSHUser (single sign-on), or if SSHPassword is specified as well, it will try Kerberos authentication with alternate credentials. This is currently supported only on Windows, unless using the Java edition, which also provides support for Linux and macOS.
`amCustom` (6)	This allows the class caller to take over the authentication process completely. When amCustom is set, the class will fire the SSHCustomAuth event as necessary to complete the authentication process.
`amGSSAPIKeyex` (7)	This allows the class to attempt Kerberos authentication using the GSSAPIKeyex scheme. The client will try Kerberos authentication using the value of SSHUser (single sign-on), or if SSHPassword is specified as well, it will try Kerberos authentication with alternate credentials. This is currently supported only on Windows, unless using the Java edition, which also provides support for Linux and macOS.

Example (User/Password Auth): Control.SSHAuthMode = SftpSSHAuthModes.amPassword Control.SSHUser = "username" Control.SSHPassword = "password" Control.SSHLogon("server", 22) Example (Public Key Auth): Control.SSHAuthMode = SftpSSHAuthModes.amPublicKey Control.SSHUser = "username" Control.SSHCert = New Certificate(CertStoreTypes.cstPFXFile, "cert.pfx", "certpassword", "*") Control.SSHLogon("server", 22)

SSHCert Property (SCP Class)

A certificate to be used for authenticating the SSHUser .

Syntax


public Certificate getSSHCert();


public void setSSHCert(Certificate SSHCert);

Remarks

In order to use public key authentication, SSHCert must contain a Certificate with a valid private key. The certificate's public key value is sent to the server along with a signature produced using the private key. The server will first check to see if the public key values match what is known for the user, and then will attempt to use those values to verify the signature.

Please refer to the Certificate type for a complete list of fields.

SSHCompressionAlgorithms Property (SCP Class)

A comma-separated list containing all allowable compression algorithms.

Syntax


public String getSSHCompressionAlgorithms();


public void setSSHCompressionAlgorithms(String SSHCompressionAlgorithms);

Default Value

"none,zlib"

Remarks

During the SSH handshake, this list will be used to negotiate the compression algorithm to be used between the client and server. This list is used for both directions: client to server and server to client. When negotiating algorithms, each side sends a list of all algorithms it supports or allows. The algorithm chosen for each direction is the first algorithm to appear in the sender's list that the receiver supports, so it is important to list multiple algorithms in preferential order. If no algorithm can be agreed upon, the class will raise an error and the connection will be aborted.

At least one supported algorithm must appear in this list. The following compression algorithms are supported by the class:

zlib
zlib@openssh.com
none

SSHEncryptionAlgorithms Property (SCP Class)

A comma-separated list containing all allowable encryption algorithms.

Syntax


public String getSSHEncryptionAlgorithms();


public void setSSHEncryptionAlgorithms(String SSHEncryptionAlgorithms);

Default Value

"aes256-ctr,aes192-ctr,aes128-ctr,aes256-cbc,aes192-cbc,aes128-cbc,3des-ctr,3des-cbc,blowfish-cbc,arcfour256,arcfour128,arcfour,cast128-cbc,aes256-gcm@openssh.com,aes128-gcm@openssh.com,chacha20-poly1305@openssh.com"

Remarks

During the SSH handshake, this list will be used to negotiate the encryption algorithm to be used between the client and server. This list is used for both directions: client to server and server to client. When negotiating algorithms, each side sends a list of all algorithms it supports or allows. The algorithm chosen for each direction is the first algorithm to appear in the sender's list that the receiver supports, so it is important to list multiple algorithms in preferential order. If no algorithm can be agreed upon, the class will raise an error and the connection will be aborted.

At least one supported algorithm must appear in this list. The following encryption algorithms are supported by the class:


`aes256-ctr`	256-bit AES encryption in CTR mode
`aes256-cbc`	256-bit AES encryption in CBC mode
`aes192-ctr`	192-bit AES encryption in CTR mode
`aes192-cbc`	192-bit AES encryption in CBC mode
`aes128-ctr`	128-bit AES encryption in CTR mode
`aes128-cbc`	128-bit AES encryption in CBC mode
`3des-ctr`	192-bit (3-key) triple DES encryption in CTR mode
`3des-cbc`	192-bit (3-key) triple DES encryption in CBC mode
`cast128-cbc`	CAST-128 encryption
`blowfish-cbc`	Blowfish encryption
`arcfour`	ARC4 encryption
`arcfour128`	128-bit ARC4 encryption
`arcfour256`	256-bit ARC4 encryption
`aes256-gcm@openssh.com`	256-bit AES encryption in GCM mode.
`aes128-gcm@openssh.com`	128-bit AES encryption in GCM mode.
`chacha20-poly1305@openssh.com`	ChaCha20 with Poly1305-AES encryption.

SSHHost Property (SCP Class)

The address of the SSH host.

Syntax


public String getSSHHost();


public void setSSHHost(String SSHHost);

Default Value

Remarks

The SSHHost property specifies the IP address (IP number in dotted internet format) or Domain Name of the remote host. It is set before a connection is attempted and cannot be changed once a connection is established.

If the SSHHost property is set to a Domain Name, a DNS request is initiated, and upon successful termination of the request, the SSHHost property is set to the corresponding address. If the search is not successful, an error is returned.

The SSHHost must be the same host that will be assumed for SSH as for the remote service being connected to.

SSHPassword Property (SCP Class)

The password for SSH password-based authentication.

Syntax


public String getSSHPassword();


public void setSSHPassword(String SSHPassword);

Default Value

Remarks

SSHPassword specifies the password which is used to authenticate the client to the SSH server.

SSHPort Property (SCP Class)

The port on the SSH server where the SSH service is running; by default, 22.

Syntax


public int getSSHPort();


public void setSSHPort(int SSHPort);

Default Value

Remarks

The SSHPort specifies a service port on the SSH host to connect to.

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

SSHUser Property (SCP Class)

The username for SSH authentication.

Syntax


public String getSSHUser();


public void setSSHUser(String SSHUser);

Default Value

Remarks

SSHUser specifies the username which is used to authenticate the client to the SSH server. This property is required.

Timeout Property (SCP Class)

A timeout for the class.

Syntax


public int getTimeout();


public void setTimeout(int timeout);

Default Value

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the class throws an exception.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Config Method (Scp Class)

Sets or retrieves a configuration setting.

Syntax

public String config(String configurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DecodePacket Method (Scp Class)

Decodes a hex-encoded SSH packet.

Syntax

public byte[] decodePacket(String encodedPacket);

Remarks

This method is used to decode an SSH packet created by EncodePacket.

Note: This method is only applicable for reading and creating SSH packets for use within the SSHCustomAuth event.

DoEvents Method (Scp Class)

Processes events from the internal message queue.

Syntax

public void doEvents();

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Download Method (Scp Class)

Download a RemoteFile from an SCP server.

Syntax

public void download();

Remarks

The remote file specified by RemoteFile is downloaded to the local file specified by LocalFile, or it is retrieved through the Transfer event, if the LocalFile property is "" (empty string). RemoteFile is an absolute or relative path on the server.

If there is no SSH session in place, one is automatically created by the component first.

Example

Multiple file uploads and downloads are supported through the use of filemasks.

EncodePacket Method (Scp Class)

Hex encodes an SSH packet.

Syntax

public String encodePacket(byte[] packet);

Remarks

This method is used to encode a raw SSH packet created by SetSSHParam.

Note: This method is only applicable for reading and creating SSH packets for use within the SSHCustomAuth event.

GetSSHParam Method (Scp Class)

Used to read a field from an SSH packet's payload.

Syntax

public String getSSHParam(byte[] payload, String field);

Remarks

This method is used to read the value of a particular field from an SSH packet's payload. Payload should contain the full payload of a packet received by an event such as SSHChannelRequest. Field is the name of a field to be read out of the packet.

The following is a list of the names of well-known channel request field names and their encodings:


ChannelId (`int32`)	The id of the channel that received the packet.
RequestType (`string`)	The type of channel request.
WantsReply (`boolean`)	Whether or not the client wants a reply to the request.

The remaining fields that are available in the payload are dependent upon the value of RequestType.

pty-req

Pty-req is a request to open a pseudo terminal on the specified channel. The following fields are available:


TerminalType (`string`)	The type of terminal being requested (eg: "vt100").
TerminalWidthCharacters (`int32`)	The width, in characters, of the terminal to be opened.
TerminalHeightRows (`int32`)	The height, in rows, of the terminal to be opened.
TerminalWidthPixels (`int32`)	The width, in pixels, of the terminal to be opened.
TerminalHeightPixels (`int32`)	The height, in pixels, of the terminal to be opened.
TerminalModes (`string`)	A list of op-val (int32-byte) encoded modes to be used by the terminal.

x11-req

X11-req is a request to forward x11 sessions over a channel. The following fields are available:


SingleConnection (`boolean`)	Disallows more than one connection to be forwarded by the channel.
X11AuthProtocol (`string`)	The authentication protocol to be used (eg: "MIT-MAGIC-COOKIE-1").
X11AuthCookie (`string`)	A hexadecimal-encoded cookie to be used for authentication.
X11ScreenNumber (`int32`)	The x11 screen number to be used.

env

Env is a request to set an environment variable to be passed into a shell that may be started later. The following fields are available:


VariableName (`string`)	The name of the variable to be set.
VariableValue (`string`)	The value of the variable to be set.

exec

Exec is a request to execute a command on the channel using the authenticated user's shell. The following field is available:


Command (`string`)	The command to be executed.

subsystem

Subsystem is a request to start a subsystem on the specified channel. The following field is available:


Subsystem (`string`)	The name of the subsystem to be started (eg: "sftp").

xon-xoff

Instructs the server to allow or disallow control-S/control-Q style flow control. The following field is available:


ClientCanDo (`boolean`)	Whether or not the server should enable flow control.

signal

Sends a signal to the remote process/service. The following field is available:


SignalName (`string`)	The name of the signal to be sent.

If the packet type is not well known, Field should start with the special character "%" and contain a comma-separated list of field types as defined in SetSSHParam. For example, reading out the X11AuthProtocol of an x11-req payload, you can use "%s,f".

Note: the return value is a string encoded the same way as the FieldValue param in SetSSHParam.

Note: This method is only applicable for reading and creating SSH packets for use within the SSHCustomAuth event.

GetSSHParamBytes Method (Scp Class)

Used to read a field from an SSH packet's payload.

Syntax

public byte[] getSSHParamBytes(byte[] payload, String field);

Remarks

This method is the same as calling GetSSHParam, but returns raw bytes instead of strings.

Note: This method is only applicable for reading and creating SSH packets for use within the SSHCustomAuth event.

Interrupt Method (Scp Class)

Interrupt the current method.

Syntax

public void interrupt();

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

Reset Method (Scp Class)

Reset the class.

Syntax

public void reset();

Remarks

This method will reset the class's properties to their default values.

SetDownloadStream Method (Scp Class)

Sets the stream to which the downloaded data from the server will be written.

Syntax

public void setDownloadStream(java.io.OutputStream downloadStream);

Remarks

If a download stream is set before the Download method is called, the downloaded data will be written to the stream. The stream should be open and normally set to position 0.

The class will automatically close this stream if CloseStreamAfterTransfer is true (default). If the stream is closed, you will need to call SetDownloadStream again before calling Download again.

The downloaded content will be written starting at the current position in the stream.

Note: SetDownloadStream and LocalFile will reset the other.

SetSSHParam Method (Scp Class)

Used to write a field to the end of a payload.

Syntax

public byte[] setSSHParam(byte[] payload, String fieldType, String fieldValue);

Remarks

This method is used to build the payload portion of an SSH packet to be sent later by a call to SendSSHPacket. Payload should contain the result of a previous call to SetSSHParam. FieldType is a string defining the type of field to be written to the packet. FieldValue should be the string representation of the field to be written.

The following is a list of supported field types and a description of how FieldValue should be encoded:


s	A plaintext string containing the default system encoding of the data.
sb	A string containing the hex encoded data. (eg: "A1B23C")
m	A variable-length large integer, encoded as a textual representation of the value ("1234").
i	A 32-bit integer, encoded as a textual representation of the value (eg: "1234").
l	A 64-bit integer, encoded as a textual representation of the value (eg: "1234").
b	A single byte, encoded as a textual representation of the value (eg: "123").
f	A boolean flag, encoded as a textual representation of the value (eg: 'true' or 'false')

Note: integer values may be encoded in hexadecimal by prefixing "0x" to the beginning of the string, otherwise the value is assumed to be base-10.

Note: This method is only applicable for reading and creating SSH packets for use within the SSHCustomAuth event.

SetUploadStream Method (Scp Class)

Sets the stream from which the class will read data to upload to the server.

Syntax

public void setUploadStream(java.io.InputStream uploadStream);

Remarks

If an upload stream is set before the Upload method is called, the content of the stream will be read by the class and uploaded to the server. The stream should be open and normally set to position 0. The class will automatically close this stream if CloseStreamAfterTransfer is true (default). If the stream is closed, you will need to call SetUploadStream again before calling Upload again. The content of the stream will be read from the current position all the way to the end and no bytes will be skipped.

Note: SetUploadStream and LocalFile will reset the other.

SSHLogoff Method (Scp Class)

Logoff from the SSH server.

Syntax

public void SSHLogoff();

Remarks

Logoff from the SSH server. If that fails, the connection is terminated by the local host.

SSHLogon Method (Scp Class)

Logon to the SSHHost using the current SSHUser and SSHPassword .

Syntax

public void SSHLogon(String SSHHost, int SSHPort);

Remarks

Logon to the SSH server using the current SSHUser and SSHPassword. This will perform the SSH handshake and authentication.

Example (Logging On)

SSHClient.SSHUser = "username" SSHClient.SSHPassword = "password" SSHClient.SSHLogon("sshHost", sshPort)

Upload Method (Scp Class)

Upload a file specified by LocalFile to an SCP server.

Syntax

public void upload();

Remarks

The local file specified by LocalFile is uploaded to the remote file specified by RemoteFile. RemoteFile is either an absolute path on the server, or a path relative to the server current directory;

If there is no SSH session in place, one is automatically created by the component first.

Example

Connected Event (Scp Class)

This event is fired immediately after a connection completes (or fails).

Syntax

public class DefaultScpEventListener implements ScpEventListener {
  ...
  public void connected(ScpConnectedEvent e) {}
  ...
}

public class ScpConnectedEvent {
  public int statusCode;
  public String description;
}

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

ConnectionStatus Event (Scp Class)

This event is fired to indicate changes in the connection state.

Syntax

public class DefaultScpEventListener implements ScpEventListener {
  ...
  public void connectionStatus(ScpConnectionStatusEvent e) {}
  ...
}

public class ScpConnectionStatusEvent {
  public String connectionEvent;
  public int statusCode;
  public String description;
}

Remarks

The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:


	Firewall connection complete.
	Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable).
	Remote host connection complete.
	Remote host disconnected.
	SSL or S/Shell connection broken.
	Firewall host disconnected.

StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Disconnected Event (Scp Class)

This event is fired when a connection is closed.

Syntax

public class DefaultScpEventListener implements ScpEventListener {
  ...
  public void disconnected(ScpDisconnectedEvent e) {}
  ...
}

public class ScpDisconnectedEvent {
  public int statusCode;
  public String description;
}

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.

Please refer to the Error Codes section for more information.

EndTransfer Event (Scp Class)

Fired when a file completes downloading/uploading.

Syntax

public class DefaultScpEventListener implements ScpEventListener {
  ...
  public void endTransfer(ScpEndTransferEvent e) {}
  ...
}

public class ScpEndTransferEvent {
  public int direction;
  public String localFile;
  public String remoteFile;
  public String remotePath;
}

Remarks

The EndTransfer event fires when either an upload or a download operation completes. This is when the file finishes transferring and/or a directory listing is finished.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The LocalFile, RemoteFile, and RemotePath parameters provide information about the current transfer.

Error Event (Scp Class)

Information about errors during data delivery.

Syntax

public class DefaultScpEventListener implements ScpEventListener {
  ...
  public void error(ScpErrorEvent e) {}
  ...
}

public class ScpErrorEvent {
  public int errorCode;
  public String description;
  public String localFile;
  public String remoteFile;
  public String remotePath;
}

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class throws an exception.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

The LocalFile, RemoteFile, and RemotePath parameters provide information about the current transfer.

Log Event (Scp Class)

Fires once for each log message.

Syntax

public class DefaultScpEventListener implements ScpEventListener {
  ...
  public void log(ScpLogEvent e) {}
  ...
}

public class ScpLogEvent {
  public int logLevel;
  public String message;
  public String logType;
}

Remarks

This event fires once for each log messages generated by the class. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the detail level of the message. Possible values are:


0 (None)	No messages are logged.
1 (Info - Default)	Informational events such as SSH handshake messages are logged.
2 (Verbose)	Detailed data such as individual packet information is logged.
3 (Debug)	Debug data including all relevant sent and received bytes are logged.

Message is the log message.

LogType is reserved for future use.

SSHCustomAuth Event (Scp Class)

Fired when the class is doing custom authentication.

Syntax

public class DefaultScpEventListener implements ScpEventListener {
  ...
  public void SSHCustomAuth(ScpSSHCustomAuthEvent e) {}
  ...
}

public class ScpSSHCustomAuthEvent {
  public String packet;
}

Remarks

SSHCustomAuth is fired during the user authentication stage of the SSH logon process if SSHAuthMode is set to amCustom. Packet contains the raw last SSH packet sent by the server, in HEX-encoded format.

The client should create a new raw SSH packet to send to the server and set Packet to the HEX-encoded representation of the packet to send.

In all cases, Packet will start with the message type field.

To read the incoming packet call DecodePacket and then use the GetSSHParam and GetSSHParamBytes methods. To create a packet use the SetSSHParam method and then call EncodePacket to obtain a HEX-encoded value and assign this to the Packet parameter.

SSHKeyboardInteractive Event (Scp Class)

Fired when the class receives a request for user input from the server.

Syntax

public class DefaultScpEventListener implements ScpEventListener {
  ...
  public void SSHKeyboardInteractive(ScpSSHKeyboardInteractiveEvent e) {}
  ...
}

public class ScpSSHKeyboardInteractiveEvent {
  public String name;
  public String instructions;
  public String prompt;
  public String response;
  public boolean echoResponse;
}

Remarks

SSHKeyboardInteractive is fired during the user authentication stage of the SSH logon process. During authentication, the class will request a list of available authentication methods for the SSHUser. For example, if the SSHHost responds with "keyboard-interactive", the class will fire this event to allow the client application to set the password.

During authentication, the SSH server may respond with a request for the user's authentication information. Name is a server-provided value associated with the authentication method such as "CRYPTOCard Authentication". Instructions will contain specific instructions, also supplied by the server, for how the user should respond.

Along with these values, the server will also send at least one input Prompt to be displayed to and filled out by the user. Response should be set to the user's input, and will be sent back in the user authentication information response. EchoResponse is a server recommendation for whether or not the user's response should be echoed back during input.

Note: the server may send several prompts in a single packet. The class will fire the SSHKeyboardInteractive event once for each prompt.

SSHServerAuthentication Event (Scp Class)

Fired after the server presents its public key to the client.

Syntax

public class DefaultScpEventListener implements ScpEventListener {
  ...
  public void SSHServerAuthentication(ScpSSHServerAuthenticationEvent e) {}
  ...
}

public class ScpSSHServerAuthenticationEvent {
  public byte[] hostKey;
  public String fingerprint;
  public String keyAlgorithm;
  public String certSubject;
  public String certIssuer;
  public String status;
  public boolean accept;
}

Remarks

This event is where the client can decide whether to continue with the connection process or not. If the public key is known to be a valid key for the SSH server, Accept should be set to True within the event. Otherwise, the server will not be authenticated and the connection will be broken.

Accept will be True only if either HostKey or Fingerprint is identical to the value of SSHAcceptServerHostKey.

Accept may be set to True manually to accept the server host key.

Note that SSH's security inherently relies on client verification of the host key. Ignoring the host key and always setting Accept to true is strongly discouraged, and could cause potentially serious security vulnerabilities in your application. It is recommended that clients maintain a list of known keys for each server and check HostKey against this list each time a connection is attempted.

Host Key contains the full binary text of the key, in the same format used internally by SSH.

Fingerprint holds the SHA-256 hash of HostKey in the hex-encoded form: 0a:1b:2c:3d. To configure the hash algorithm used to calculate this value see SSHFingerprintHashAlgorithm.

KeyAlgorithm identifies the host key algorithm. Supported values are:

ssh-rsa
ssh-dss
rsa-sha2-256
rsa-sha2-512
x509v3-sign-rsa
x509v3-sign-dss
ecdsa-sha2-nistp256
ecdsa-sha2-nistp384
ecdsa-sha2-nistp521

To limit the accepted host key algorithms refer to SSHPublicKeyAlgorithms.

CertSubject is the subject of the certificate. This is only applicable when KeyAlgorithm is "x509v3-sign-rsa" or "x509v3-sign-dss".

CertIssuer is the issuer of the certificate. This is only applicable when KeyAlgorithm is "x509v3-sign-rsa" or "x509v3-sign-dss".

Status is reserved for future use.

SSHStatus Event (Scp Class)

Shows the progress of the secure connection.

Syntax

public class DefaultScpEventListener implements ScpEventListener {
  ...
  public void SSHStatus(ScpSSHStatusEvent e) {}
  ...
}

public class ScpSSHStatusEvent {
  public String message;
}

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

StartTransfer Event (Scp Class)

Fired when a file starts downloading/uploading.

Syntax

public class DefaultScpEventListener implements ScpEventListener {
  ...
  public void startTransfer(ScpStartTransferEvent e) {}
  ...
}

public class ScpStartTransferEvent {
  public int direction;
  public String localFile;
  public String remoteFile;
  public String remotePath;
  public String filePermissions;
}

Remarks

The StartTransfer event fires when the file starts transferring.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The LocalFile, RemoteFile, and RemotePath parameters provide information about the current transfer.

The FilePermissions parameter may be used to set the remote file permissions on file currently being uploaded. It will also be populated with the current permissions of the remote file when downloading. See FilePermissions for more details.

Transfer Event (Scp Class)

Fired during file download/upload.

Syntax

public class DefaultScpEventListener implements ScpEventListener {
  ...
  public void transfer(ScpTransferEvent e) {}
  ...
}

public class ScpTransferEvent {
  public int direction;
  public String localFile;
  public String remoteFile;
  public String remotePath;
  public long bytesTransferred;
  public int percentDone;
  public byte[] text;
}

Remarks

One or more Transfer events are fired during file transfer. The BytesTransferred parameter shows the number of bytes transferred since the beginning of the transfer.

Text contains the portion of the file data being delivered.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The LocalFile, RemoteFile, and RemotePath parameters provide information about the current transfer.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

EffectiveDate
String (read-only)
Default Value: ""

This is the date on which this certificate becomes valid. Before this date, it is not valid. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

Encoded
String
Default Value: ""

This is the certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

EncodedB
byte[]
Default Value: ""

This is the certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

ExpirationDate
String (read-only)
Default Value: ""

This is the date the certificate expires. After this date, the certificate will no longer be valid. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

ExtendedKeyUsage
String
Default Value: ""

This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

Fingerprint
String (read-only)
Default Value: ""

This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

FingerprintSHA1
String (read-only)
Default Value: ""

This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

FingerprintSHA256
String (read-only)
Default Value: ""

This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

Issuer
String (read-only)
Default Value: ""

This is the issuer of the certificate. This field contains a string representation of the name of the issuing authority for the certificate.

KeyPassword
String
Default Value: ""

This is the password for the certificate's private key (if any).

Some certificate stores may individually protect certificates' private keys, separate from the standard protection offered by the StorePassword. KeyPassword. This field can be used to read such password-protected private keys.

Note: this property defaults to the value of StorePassword. To clear it, you must set the property to the empty string (""). It can be set at any time, but when the private key's password is different from the store's password, then it must be set before calling PrivateKey.

PrivateKey
String (read-only)
Default Value: ""

This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The PrivateKey may be available but not exportable. In this case, PrivateKey returns an empty string.

PrivateKeyAvailable
boolean (read-only)
Default Value: False

This field shows whether a PrivateKey is available for the selected certificate. If PrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

PrivateKeyContainer
String (read-only)
Default Value: ""

This is the name of the PrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

PublicKey
String (read-only)
Default Value: ""

This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.

PublicKeyAlgorithm
String
Default Value: ""

This field contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

PublicKeyLength
int (read-only)
Default Value: 0

This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

SerialNumber
String (read-only)
Default Value: ""

This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

SignatureAlgorithm
String (read-only)
Default Value: ""

The field contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

Store
String
Default Value: "MY"

This is the name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StoreB
byte[]
Default Value: "MY"

This is the name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

StorePassword
String
Default Value: ""

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

StoreType
int
Default Value: 0

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This field can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Subject
String
Default Value: ""

This is the subject of the certificate used for client authentication.

This field will be populated with the full subject of the loaded certificate. When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:


Field	Meaning
CN	Common Name. This is commonly a hostname like www.server.com.
O	Organization
OU	Organizational Unit
L	Locality
S	State
C	Country
E	Email Address

If a field value contains a comma, it must be quoted.

SubjectAltNames
String (read-only)
Default Value: ""

This field contains comma-separated lists of alternative subject names for the certificate.

ThumbprintMD5
String (read-only)
Default Value: ""

This field contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA1
String (read-only)
Default Value: ""

This field contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA256
String (read-only)
Default Value: ""

This field contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

Usage
String
Default Value: ""

This field contains the text description of UsageFlags.

This value will be of one or more of the following strings and will be separated by commas:

Digital Signatures
Key Authentication
Key Encryption
Data Encryption
Key Agreement
Certificate Signing
Key Signing

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

UsageFlags
int
Default Value: 0

This field contains the flags that show intended use for the certificate. The value of UsageFlags is a combination of the following flags:


0x80	Digital Signatures
0x40	Key Authentication (Non-Repudiation)
0x20	Key Encryption
0x10	Data Encryption
0x08	Key Agreement
0x04	Certificate Signing
0x02	Key Signing

Please see the Usage field for a text representation of UsageFlags.

This functionality currently is not available when the provider is OpenSSL.

Version
String (read-only)
Default Value: ""

This field contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".

Constructors

public Certificate();

Creates a Certificate instance whose properties can be set. This is useful for use with CERTMGR when generating new certificates.

public Certificate( certificateFile);

Opens CertificateFile and reads out the contents as an X.509 public key.

public Certificate( certificateData);

Parses CertificateData as an X.509 public key.

public Certificate( certStoreType,  store,  storePassword,  subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  store,  storePassword,  subject,  configurationString);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. ConfigurationString is a newline separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CryptoAPI option. The default value is True (the key is persisted). "Thumbprint" - an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to cstUser, cstMachine, cstPublicKeyFile, and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  store,  storePassword,  encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

public Certificate( certStoreType,  storeBlob,  storePassword,  subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. StoreBlob is a string (binary- or Base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  storeBlob,  storePassword,  subject,  configurationString);

public Certificate( certStoreType,  storeBlob,  storePassword,  encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or Base64-encoded) containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

Firewall Type

The firewall the class will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall Host and the FirewallType.

Fields

AutoDetect
boolean
Default Value: False

This field tells the class whether or not to automatically detect and use firewall system settings, if available.

Connection information will first be obtained from Java system properties, such as http.proxyHost and https.proxyHost. Java properties may be set in a variety of ways; please consult the Java documentation for information about how firewall and proxy values can be specified.

If no Java system properties define connection information, the class will inspect the Windows registry for connection information that may be present on the system (applicable only on Windows systems).

FirewallType
int
Default Value: 0

This field determines the type of firewall to connect through. The applicable values are as follows:


fwNone (0)	No firewall (default setting).
fwTunnel (1)	Connect through a tunneling proxy. Port is set to 80.
fwSOCKS4 (2)	Connect through a SOCKS4 Proxy. Port is set to 1080.
fwSOCKS5 (3)	Connect through a SOCKS5 Proxy. Port is set to 1080.
fwSOCKS4A (10)	Connect through a SOCKS4A Proxy. Port is set to 1080.

Host
String
Default Value: ""

This field contains the name or IP address of firewall (optional). If a Host is given, the requested connections will be authenticated through the specified firewall when connecting.

If this field is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this field is set to the corresponding address. If the search is not successful, the class throws an exception.

Password
String
Default Value: ""

This field contains a password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password fields are used to connect and authenticate to the given firewall. If the authentication fails, the class throws an exception.

Port
int
Default Value: 0

This field contains the transmission control protocol (TCP) port for the firewall Host. See the description of the Host field for details.

Note: This field is set automatically when FirewallType is set to a valid value. See the description of the FirewallType field for details.

User
String
Default Value: ""

This field contains a user name if authentication is to be used connecting through a firewall. If the Host is specified, this field and Password fields are used to connect and authenticate to the given Firewall. If the authentication fails, the class throws an exception.

Constructors

public Firewall();

Config Settings (Scp Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

SCP Config Settings

DirectoryPermissions: The permissions of folders created on the remote host.

This is only applicable when RecursiveMode is set to true. If new folders are created on the remote host as a result of the Upload operation this setting specifies the permissions those new folders will be assigned. This is a four (4) digit octal value. See FilePermissions for more details on expected values. The default value is "0700".

LastAccessedTime: The last accessed time of the remote file.

This returns the last accessed time of the remote file. It is only applicable for download when PreserveFileTime is set to True. This may be queried within the StartTransfer event.

LastModifiedTime: The last modified time of the remote file.

This returns the last modified time of the remote file. It is only applicable for download when PreserveFileTime is set to True. This may be queried within the StartTransfer event.

PreserveFileTime: Preserves the file's modified time during transfer.

If set to True, the class will preserve the file's modified time during transfer. This is applicable to both uploads and downloads. The default value is True.

When enabled, the class will also populate LastModifiedTime and LastAccessedTime configuration settings. These are only applicable during download and may be used to check the times of the remote file from within the StartTransfer event. To cancel a transfer call the Interrupt method.

RecursiveMode: If set to true the class will recursively upload or download files.

When a filemask is specified in LocalFile or RemoteFile this setting specifies if sub-directories and files are transferred as well. By default this value is False and only files in the specified directory will be transferred. If set to true recursion will be used to transfer all child folders and files.

ServerResponseWindow: The time to wait for a server response in milliseconds.

After an operation is complete the server may still return an error. This setting controls the amount of time the class will wait for an error to be returned. This value is specified in milliseconds. The default value is "20".

SSHClient Config Settings

ChannelDataEOL[ChannelId]: Used to break the incoming data stream into chunks.

By default MaxChannelDataLength is 0 and ChannelDataEOL is an empty string. SSHChannelData fires whenever an SSH_MSG_CHANNEL_DATA packet is received.

If MaxChannelDataLength > 0 and ChannelDataEOL is a non-empty string the class will internally buffer data waiting to fire SSHChannelData until either MaxChannelDataLength is reached or ChannelDataEOL is found, whichever comes first. Query ChannelDataEOLFound to know which condition was met. The buffer is reset any time SSHChannelData fires.

ChannelDataEOL and MaxChannelDataLength MUST be set together or unexpected behavior could occur.

ChannelDataEOLFound[ChannelId]: Determines if ChannelDataEOL was found.

If true,then ChannelDataEOL was found. If false, then MaxChannelDataLength was reached.

This config is only valid when queried inside SSHChannelData, MaxChannelDataLength > 0, and ChannelDataEOL is non-empty.

ClientSSHVersionString: The SSH version string used by the class.

This configuration setting specifies the SSH version string used by the class. The default value is "SSH-2.0-IPWorks SSH Client 2022".

Most SSH servers expect the SSH version string to have the expected format "SSH-protocol version-software version". See above for an example.

EnablePageantAuth: Whether to use a key stored in Pageant to perform client authentication.

This setting controls whether Pageant authentication is disabled, enabled, or required. When enabled or required, the class attempts to communicate with PuTTY's ssh-agent, called "Pageant", over shared memory to perform public key authentication. Possible values and the corresponding behavior is described below:


Value	Description
0 (Disabled - default)	No communication with Pageant is attempted.
1 (Enabled)	Pageant authentication is used if available. If Pageant is not running, or does not contain the expected key no error is thrown.
2 (Required)	Only Pageant authentication is used. If Pageant is not running, or does not contain the expected key an error is thrown.

Example enabling Pageant: component.Config("EnablePageantAuth=1"); component.SSHUser = "sshuser"; component.SSHLogon("localhost", 22);

Note: This functionality is only available on Windows.

KerberosDelegation: If true, asks for credentials with delegation enabled during authentication.

The default value is "True". If set to "False", the client will not ask for credentials delegation support during authentication. Note that even if the client asks for delegation, the server/KDC might not grant it and authentication will still succeed.

KerberosRealm: The fully qualified domain name of the Kerberos Realm to use for GSSAPI authentication.

This property may be set to the fully qualified (DNS) name of the kerberos realm (or Windows Active Directory domain name) to use during GSSAPI authentication. This can be used to force authentication with a given realm if the client and server machines are not part of the same domain.

KerberosSPN: The Kerberos Service Principal Name of the SSH host.

This property can be set to specify the Service Principal Name (SPN) associated with the SSH service on the remote host. This will usually be in the form "host/fqdn.of.sshhost[@REALM]". If not specified, the class will assume the SPN is based on the value of the SSHHost property and the kerberos realm used for authentication.

KeyRenegotiationThreshold: Sets the threshold for the SSH Key Renegotiation.

This property allows you to specify the threshold, in the number of bytes, for the SSH Key Renegotiation. The default value for this property is set to 1 GB.

Example (for setting the threshold to 500 MB): SSHComponent.Config("KeyRenegotiationThreshold=524288000")

LogLevel: Specifies the level of detail that is logged.

This setting controls the level of detail that is logged through the Log event. Possible values are:


0 (None)	No messages are logged.
1 (Info - Default)	Informational events such as SSH handshake messages are logged.
2 (Verbose)	Detailed data such as individual packet information is logged.
3 (Debug)	Debug data including all relevant sent and received bytes are logged.

MaxChannelDataLength[ChannelId]: The maximum amount of data to accumulate when no ChannelDataEOL is found.

By default MaxChannelDataLength is 0 and ChannelDataEOL is an empty string. SSHChannelData fires whenever an SSH_MSG_CHANNEL_DATA packet is received.

ChannelDataEOL and MaxChannelDataLength MUST be set together or unexpected behavior could occur.

MaxPacketSize: The maximum packet size of the channel, in bytes.

This setting specifies the maximum size of an individual data packet, in bytes, that can be sent to the sender.

MaxWindowSize: The maximum window size allowed for the channel, in bytes.

This setting specifies how many bytes of channel data can be sent to the sender of this message without adjusting the window. Note that this value may be changed during the connection, but the window size can only be increased, not decreased.

NegotiatedStrictKex: Returns whether strict key exchange was negotiated to be used.

Returns whether strict key exchange (strict kex) was negotiated during the SSH handshake. If strict kex is being used, then this will return "True". If strict kex is not being used, then this will return "False".

component.Config("NegotiatedStrictKex")

PasswordPrompt: The text of the password prompt used in keyboard-interactive authentication.

This setting optionally specifies a pattern to be matched to the prompt received from the server during keyboard-interactive authentication. If a matching prompt is detected the class automatically responds to the prompt with the password specified by SSHPassword.

This provides an easy way to automatically reply to prompts with the password if one is presented by the server. The password will be auto-filled in the Response parameter of the SSHKeyboardInteractive event in the case of a match.

The following special characters are supported for pattern matching:


?	Any single character.
*	Any characters or no characters (e.g., C*t matches Cat, Cot, Coast, Ct).
[,-]	A range of characters (e.g., [a-z], [a], [0-9], [0-9,a-d,f,r-z]).
\	The slash is ignored and exact matching is performed on the next character.

If these characters need to be used as a literal in a pattern, then they must be escaped by surrounding them with brackets []. Note: "]" and "-" do not need to be escaped. See below for the escape sequences:


Character	Escape Sequence
?	[?]
*	[*]
[	[[]
\	[\]

For example, to match the value [Something].txt, specify the pattern [[]Something].txt.

PreferredDHGroupBits: The size (in bits) of the preferred modulus (p) to request from the server.

This may be when using the diffie-hellman-group-exchange-sha1 or diffie-hellman-group-exchange-sha256 key exchange algorithms to control the preferred size, in bits, of the modulus (p) prime number to request from the server. Acceptable values are between 1024 and 8192.

RecordLength: The length of received data records.

If set to a positive value, this setting defines the length of data records to be received. The class will accumulate data until RecordLength is reached and only then fire the DataIn event with data of length RecordLength. This allows data to be received as records of known length. This value can be changed at any time, including within the DataIn event.

The default value is 0, meaning this setting is not used.

ServerSSHVersionString: The remote host's SSH version string.

This will return the remote host's SSH version string, which can help when identifying problematic servers. This configuration setting is read-only.

SignedSSHCert: The CA signed client public key used when authenticating.

When authenticating via public key authentication this setting may be set to the CA signed client's public key. This is useful when the server has been configured to trust client keys signed by a particular CA. For instance: component.Config("SignedSSHCert=ssh-rsa-cert-v01@openssh.com AAAAB3NzaC1yc2EAAAADAQABAAAB..."); The algorithm such as ssh-rsa-cert-v01@openssh.com in the above string is used as part of the authentication process. To use a different algorithm simply change this value. For instance all of the following are acceptable with the same signed public key:

ssh-rsa-cert-v01@openssh.com AAAAB3NzaC1yc2EAAAADAQABAAAB...
rsa-sha2-256-cert-v01@openssh.com AAAAB3NzaC1yc2EAAAADAQABAAAB...
rsa-sha2-512-cert-v01@openssh.com AAAAB3NzaC1yc2EAAAADAQABAAAB...

SSHAcceptAnyServerHostKey: If set the class will accept any key presented by the server.

The default value is "False". Set this to "True" to accept any key presented by the server.

SSHAcceptServerCAKey: The CA public key that signed the server's host key.

If the server's host key was signed by a CA, this setting may be used to specify the CA's public key. If specified the class will trust any server's host key that was signed by the CA. For instance: component.Config("SSHAcceptServerCAKey=ssh-rsa AAAAB3NzaC1yc2EAAAADAQAB...");

SSHAcceptServerHostKeyFingerPrint: The fingerprint of the server key to accept.

This may be set to a comma-delimited collection of 16-byte MD5 fingerprints that should be accepted as the host's key. You may supply it by HEX encoding the values in the form "0a:1b:2c:3d". Example: SSHClient.Config("SSHAcceptServerHostKeyFingerprint=0a:1b:2c:3d"); If the server's fingerprint matches one of the values supplied, the class will accept the host key.

SSHFingerprintHashAlgorithm: The algorithm used to calculate the fingerprint.

This configuration setting controls which hash algorithm is used to calculate the hostkey's fingerprint, displayed when SSHServerAuthentication fires. Valid values are:

MD5
SHA1
SHA256 (default)

SSHFingerprintMD5: The server hostkey's MD5 fingerprint.

This setting may be queried in SSHServerAuthentication to get the server hostkey's MD5 fingerprint.

SSHFingerprintSHA1: The server hostkey's SHA1 fingerprint.

This setting may be queried in SSHServerAuthentication to get the server hostkey's SHA1 fingerprint.

SSHFingerprintSHA256: The server hostkey's SHA256 fingerprint.

This setting may be queried in SSHServerAuthentication to get the server hostkey's SHA256 fingerprint.

SSHKeepAliveCountMax: The maximum number of keep alive packets to send without a response.

This setting specifies the maximum number of keep alive packets to send when no response is received. Normally a response to a keep alive packet is received right away. If no response is received the class will continue to send keep alive packets until SSHKeepAliveCountMax is reached. If this is reached the class will assume the connection is broken and disconnect. The default value is 5.

SSHKeepAliveInterval: The interval between keep alive packets.

This setting specifies the number of seconds between keep alive packets. If set to a positive value the class will send a SSH keep alive packet after KeepAliveInterval seconds of inactivity. This setting only takes effect when there is no activity, if any data is sent or received over the connection it will reset the timer.

The default value is 0 meaning no keep alives will be sent.

Note: The SSHReverseTunnel class uses a default value of 30.

SSHKeyExchangeAlgorithms: Specifies the supported key exchange algorithms.

This may be used to specify the list of supported key exchange algorithms used during SSH negotiation. The value should contain a comma separated list of algorithms. Supported algorithms are:

curve25519-sha256
curve25519-sha256@libssh.org
diffie-hellman-group1-sha1
diffie-hellman-group14-sha1
diffie-hellman-group14-sha256
diffie-hellman-group16-sha512
diffie-hellman-group18-sha512
diffie-hellman-group-exchange-sha256
diffie-hellman-group-exchange-sha1
ecdh-sha2-nistp256
ecdh-sha2-nistp384
ecdh-sha2-nistp521
gss-group14-sha256-toWM5Slw5Ew8Mqkay+al2g==
gss-group16-sha512-toWM5Slw5Ew8Mqkay+al2g==
gss-nistp256-sha256-toWM5Slw5Ew8Mqkay+al2g==
gss-curve25519-sha256-toWM5Slw5Ew8Mqkay+al2g==
gss-group14-sha1-toWM5Slw5Ew8Mqkay+al2g==
gss-gex-sha1-toWM5Slw5Ew8Mqkay+al2g==

The default value is: curve25519-sha256,curve25519-sha256@libssh.org,diffie-hellman-group-exchange-sha256,diffie-hellman-group14-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1,gss-group14-sha256-toWM5Slw5Ew8Mqkay+al2g==,gss-group16-sha512-toWM5Slw5Ew8Mqkay+al2g==,gss-nistp256-sha256-toWM5Slw5Ew8Mqkay+al2g==,gss-curve25519-sha256-toWM5Slw5Ew8Mqkay+al2g==,gss-group14-sha1-toWM5Slw5Ew8Mqkay+al2g==,gss-gex-sha1-toWM5Slw5Ew8Mqkay+al2g==.

SSHKeyRenegotiate: Causes the component to renegotiate the SSH keys.

Once this setting is queried, the component will renegotiate the SSH keys with the remote host.

Example: SSHClient.Config("SSHKeyRenegotiate")

SSHMacAlgorithms: Specifies the supported Mac algorithms.

This may be used to specify an alternate list of supported Mac algorithms used during SSH negotiation. This also specifies the order in which the Mac algorithms are preferred. The value should contain a comma separated list of algorithms. Supported algorithms are:

hmac-sha1
hmac-md5
hmac-sha1-96
hmac-md5-96
hmac-sha2-256
hmac-sha2-256-96
hmac-sha2-512
hmac-sha2-512-96
hmac-ripemd160
hmac-ripemd160-96
hmac-sha2-256-etm@openssh.com
hmac-sha2-512-etm@openssh.com
umac-64@openssh.com
umac-64-etm@openssh.com
umac-128@openssh.com
umac-128-etm@openssh.com

The default value is hmac-sha2-256,hmac-sha2-512,hmac-sha1,hmac-md5,hmac-ripemd160,hmac-sha1-96,hmac-md5-96,hmac-sha2-256-96,hmac-sha2-512-96,hmac-ripemd160-96,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,umac-64@openssh.com,umac-64-etm@openssh.com,umac-128@openssh.com,umac-128-etm@openssh.com.

SSHPubKeyAuthSigAlgorithms: Specifies the enabled signature algorithms that may be used when attempting public key authentication.

This setting specifies a list of signature algorithms that may be used when authenticating to the server using public key authentication. This applies only when public key authentication is performed by the client.

The setting should be a comma separated list of algorithms. At runtime the class will evaluate the specified algorithms and if the algorithm is applicable to the certificate specified in SSHCert it will be used. If the algorithm is not applicable the class will evaluate the next algorithm. Possible values are:

ssh-rsa
rsa-sha2-256
rsa-sha2-512
ssh-dss
ecdsa-sha2-nistp256
ecdsa-sha2-nistp384
ecdsa-sha2-nistp521
ssh-ed25519
x509v3-sign-rsa
x509v3-sign-dss

The default value in Windows is ssh-rsa,rsa-sha2-256,rsa-sha2-512,ssh-dss,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519.

rsa-sha2-256 and rsa-sha2-512 notes

The class will query the server for supported algorithms when connecting. If the server indicates support for rsa-sha2-256 or rsa-sha2-512 and the algorithm is present in the list defined by this setting (as in the default value), that algorithm will be used instead of ssh-rsa even when ssh-rsa appears first in the list.

For the rsa-sha2-256 and rsa-sha2-512 algorithms to be automatically preferred the server must support the ext-info-c mechanism. In practice, older servers do not support this and in that case ssh-rsa will be used since it appears first in the list. Newer servers do support this mechanism and in that case rsa-sha2-256 or rsa-sha2-512 will be used even though it appears after ssh-rsa.

This behavior has been carefully designed to provide maximum compatibility while automatically using more secure algorithms when connecting to servers which support them.

SSHPublicKeyAlgorithms: Specifies the supported public key algorithms for the server's public key.

This setting specifies the allowed public key algorithms for the server's public key. This list controls only the public key algorithm used when authenticating the server's public key. This list has no bearing on the public key algorithms that can be used by the client when performing public key authentication to the server. The default value is ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,rsa-sha2-256,rsa-sha2-512,ssh-rsa,ssh-dss,x509v3-sign-rsa,x509v3-sign-dss.

SSHVersionPattern: The pattern used to match the remote host's version string.

This configuration setting specifies the pattern used to accept or deny the remote host's SSH version string. It takes a comma-delimited list of patterns to match. The default value is "*SSH-1.99-*,*SSH-2.0-*" and will accept connections from SSH 1.99 and 2.0 hosts. As an example, the below value would accept connections for SSH 1.99, 2.0, and 2.99 hosts.

*SSH-1.99-*,*SSH-2.0-*,*SSH-2.99-*

TryAllAvailableAuthMethods: If set to true, the class will try all available authentication methods.

The default value is false. When set to true, the class will try to authenticate using all methods that it has credentials for and the server supports.

UseStrictKeyExchange: Specifies how strict key exchange is supported.

This setting controls whether strict key exchange (strict kex) is enabled to mitigate the Terrapin attack. When enabled, the class will indicate support for strict key exchange by automatically including the pseudo-algorithm kex-strict-c-v00@openssh.com for client classes and kex-strict-s-v00@openssh.com for server classes in the list of supported key exchange algorithms.

Since both client and server must implement strict key exchange to effectively mitigate the Terrapin attack, the class provides options to further control the behavior in different scenarios. Possible values for this setting are:


`0`	Disabled. Strict key exchange is not supported in the class.
`1` (default)	Enabled, but not enforced. This setting enables strict key exchange, but if the remote host does not support strict key exchange the connection is still allowed to continue.
`2`	Enabled, but reject affected algorithms if the remote host does not support strict key exchange. If the remote host supports strict key exchange all algorithms may be used. If the remote host does not support strict key exchange the connection will only continue if the selected encryption and MAC algorithms are not affected by the Terrapin attack.
`3`	Required. If the remote host does not support strict key exchange the connection will fail.

WaitForChannelClose: Whether to wait for channels to be closed before disconnected.

This setting controls whether the class will wait for a server response to the SSH_MSG_CHANNEL_CLOSE when disconnecting. When the class disconnects it will first attempt to close all open channels by sending a SSH_MSG_CHANNEL_CLOSE for each channel. This setting controls whether the class will wait for a server response after sending the messages.

When True (default) the class will wait for a response to the channel close message until the responses have been received, the server closes the connection, or Timeout seconds is reached.

When False the class will still send the channel close messages but will not wait for a response and will proceed to close the connection.

WaitForServerDisconnect: Whether to wait for the server to close the connection.

This setting controls whether to wait for the server to close the connection when SSHLogoff is called.

When set to True the class will initiate the disconnection sequence by sending SSH_MSG_DISCONNECT but will not close the connection, and instead will wait for the server to close the connection. Setting this to True may be beneficial in circumstances where many connections are being established, to avoid port exhaustion when sockets are in a TIME_WAIT state. Allowing the server to close the connection avoids the TIME_WAIT state of socket on the client machine.

When set to False (default) the client will close the connection. It is recommended to use this value unless there is a specific need to change it.

TCPClient Config Settings

CloseStreamAfterTransfer: If true, the component will close the upload or download stream after the transfer.

This setting determines whether the input or output stream is closed after the transfer completes. When set to True (default), all streams will be closed after a transfer is completed. In order to keep streams open after the transfer of data, set this to False. the default value is True.

ConnectionTimeout: Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the class will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect: Tells the class whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallHost: Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallListener: If true, the component binds to a SOCKS firewall as a server (TCPClient only).

This entry is for TCPClient only and does not work for other components that descend from TCPClient.

If this entry is set, the class acts as a server. RemoteHost and RemotePort are used to tell the SOCKS firewall in which address and port to listen to. The firewall rules may ignore RemoteHost, and it is recommended that RemoteHost be set to empty string in this case.

RemotePort is the port in which the firewall will listen to. If set to 0, the firewall will select a random port. The binding (address and port) is provided through the ConnectionStatus event.

The connection to the firewall is made by calling the Connect method.

FirewallPassword: Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the class throws an exception.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallPort: The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallType: Determines the type of firewall to connect through.

The appropriate values are as follows:


0	No firewall (default setting).
1	Connect through a tunneling proxy. FirewallPort is set to 80.
2	Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3	Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10	Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallUser: A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the class throws an exception.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

KeepAliveInterval: The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime: The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger: When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime: Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost: The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

LocalPort: The port in the local host where the class binds.

This must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength: The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate: The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList: A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive: Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay: Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6: Whether to use IPv6.

When set to 0 (default), the class will use IPv4 exclusively. When set to 1, the class will use IPv6 exclusively. To instruct the class to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are:


0	IPv4 Only
1	IPv6 Only
2	IPv6 with IPv4 fallback

UseNTLMv2: Whether to use NTLM V2.

When authenticating with NTLM, this setting specifies whether NTLM V2 is used. By default this value is False and NTLM V1 will be used. Set this to True to use NTLM V2.

Socket Config Settings

AbsoluteTimeout: Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

FirewallData: Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

InBufferSize: The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize: The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo: Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

GUIAvailable: Whether or not a message loop is available for processing events.

In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The class will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.

In some non-GUI applications, an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GUIAvailable to false will ensure that the class does not attempt to process external events.

LicenseInfo: Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

Product: The product the license is for.
Product Key: The key the license was generated from.
License Source: Where the license was found (e.g., RuntimeLicense, License File).
License Type: The type of license installed (e.g., Royalty Free, Single Server).
Last Valid Build: The last valid build number for which the license will work.

MaskSensitive: Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseDaemonThreads: Whether threads created by the class are daemon threads.

If set to True (default), when the class creates a thread, the thread's Daemon property will be explicitly set to True. When set to False, the class will not set the Daemon property on the created thread. The default value is True.

UseFIPSCompliantAPI: Tells the class whether or not to use FIPS certified APIs.

When set to true, the class will utilize the underlying operating system's certified APIs. Java editions, regardless of OS, utilize Bouncy Castle FIPS, while all the other Windows editions make use of Microsoft security libraries.

The Java edition requires installation of the FIPS certified Bouncy Castle library regardless of the target operating system. This can be downloaded from https://www.bouncycastle.org/fips-java/. Only the "Provider" library is needed. The jar file should then be installed in a JRE search path.

In the application where the component will be used the following classes must be imported:

import java.security.Security; import org.bouncycastle.jcajce.provider.BouncyCastleFipsProvider;

The Bouncy Castle provider must be added as a valid provider and must also be configured to operate in FIPS mode:

System.setProperty("org.bouncycastle.fips.approved_only","true"); Security.addProvider(new BouncyCastleFipsProvider());

When UseFIPSCompliantAPI is true, SSL enabled classes can optionally be configured to use the TLS Bouncy Castle library. When SSLProvider is set to sslpAutomatic (default) or sslpInternal an internal TLS implementation is used, but all cryptographic operations are offloaded to the BCFIPS provider in order to achieve FIPS compliant operation. If SSLProvider is set to sslpPlatform the Bouncy Castle JSSE will be used in place of the internal TLS implementation.

To enable the use of the Bouncy Castle JSSE take the following steps in addition to the steps above. Both the Bouncy Castle FIPS provider and the Bouncy Castle JSSE must be configured to use the Bouncy Castle TLS library in FIPS mode. Obtain the Bouncy Castle TLS library from https://www.bouncycastle.org/fips-java/. The jar file should then be installed in a JRE search path.

In the application where the component will be used the following classes must be imported:

import java.security.Security; import org.bouncycastle.jcajce.provider.BouncyCastleFipsProvider; //required to use BCJSSE when SSLProvider is set to sslpPlatform import org.bouncycastle.jsse.provider.BouncyCastleJsseProvider;

The Bouncy Castle provider must be added as a valid provider and must also be configured to operate in FIPS mode:

System.setProperty("org.bouncycastle.fips.approved_only","true"); Security.addProvider(new BouncyCastleFipsProvider()); //required to use BCJSSE when SSLProvider is set to sslpPlatform Security.addProvider(new BouncyCastleJsseProvider("fips:BCFIPS")); //optional - configure logging level of BCJSSE Logger.getLogger("org.bouncycastle.jsse").setLevel(java.util.logging.Level.OFF); //configure the class to use BCJSSE component.setSSLProvider(1); //platform component.config("UseFIPSCompliantAPI=true"); Note: TLS 1.3 support requires the Bouncy Castle TLS library version 1.0.14 or later.

FIPS mode can be enabled by setting the UseFIPSCompliantAPI configuration setting to true. This is a static setting which applies to all instances of all classes of the toolkit within the process. It is recommended to enable or disable this setting once before the component has been used to establish a connection. Enabling FIPS while an instance of the component is active and connected may result in unexpected behavior.

For more details please see the FIPS 140-2 Compliance article.

Note: Enabling FIPS-compliance requires a special license; please contact sales@nsoftware.com for details.

UseInternalSecurityAPI: Whether or not to use the system security libraries or an internal implementation.

When set to false, the class will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to true tells the class to use the internal implementation instead of using the system security libraries.

This setting is set to false by default on all platforms.

Trappable Errors (Scp Class)

SCP Errors


	118 Firewall error. Error description contains detailed information.

SSHClient Errors


	1001 Server has disconnected.
	1002 Protocol version unsupported or other issue with version string.
	1003 Cannot negotiate algorithms.
	1005 Selected algorithm unsupported.
	1006 Cannot set keys.
	1010 Unexpected algorithm.
	1011 Cannot create exchange hash.
	1012 Cannot make key.
	1013 Cannot sign data.
	1014 Cannot encrypt packet.
	1015 Cannot decrypt packet.
	1016 Cannot decompress packet.
	1020 Failure to open channel.
	1021 Invalid channel ID.
	1022 Invalid channel data.
	1023 Invalid channel message.
	1024 SSH message unimplemented.
	1027 Server message unsupported.
	1030 Server's host key was rejected. The host key may be accepted within the SSHServerAuthentication event or using the SSHAcceptServerHostKey property.
	1031 Cannot verify server's host key.
	1032 Authentication failed. Check description for details.
	1033 Channel request failed.
	1034 Diffie-Hellman exchange failed.
	1036 SSH connection failed.
	1037 SSH reconnect limit reached.
	1038 Elliptic Curve Diffie-Hellman exchange failed.
	1039 SSH keep-alive limit reached.
	1098 Request failure.
	1130 Would block error.
	1133 Would block, reason: key reExchange.

TCPClient Errors


	100 You cannot change the RemotePort at this time. A connection is in progress.
	101 You cannot change the RemoteHost (Server) at this time. A connection is in progress.
	102 The RemoteHost address is invalid (0.0.0.0).
	104 Already connected. If you want to reconnect, close the current connection first.
	106 You cannot change the LocalPort at this time. A connection is in progress.
	107 You cannot change the LocalHost at this time. A connection is in progress.
	112 You cannot change MaxLineLength at this time. A connection is in progress.
	116 RemotePort cannot be zero. Please specify a valid service port number.
	117 You cannot change the UseConnection option while the class is active.
	135 Operation would block.
	201 Timeout.
	211 Action impossible in control's present state.
	212 Action impossible while not connected.
	213 Action impossible while listening.
	301 Timeout.
	303 Could not open file.
	434 Unable to convert string to selected CodePage.
	1105 Already connecting. If you want to reconnect, close the current connection first.
	1117 You need to connect first.
	1119 You cannot change the LocalHost at this time. A connection is in progress.
	1120 Connection dropped by remote host.

TCP/IP Errors


	10004 [10004] Interrupted system call.
	10009 [10009] Bad file number.
	10013 [10013] Access denied.
	10014 [10014] Bad address.
	10022 [10022] Invalid argument.
	10024 [10024] Too many open files.
	10035 [10035] Operation would block.
	10036 [10036] Operation now in progress.
	10037 [10037] Operation already in progress.
	10038 [10038] Socket operation on non-socket.
	10039 [10039] Destination address required.
	10040 [10040] Message too long.
	10041 [10041] Protocol wrong type for socket.
	10042 [10042] Bad protocol option.
	10043 [10043] Protocol not supported.
	10044 [10044] Socket type not supported.
	10045 [10045] Operation not supported on socket.
	10046 [10046] Protocol family not supported.
	10047 [10047] Address family not supported by protocol family.
	10048 [10048] Address already in use.
	10049 [10049] Can't assign requested address.
	10050 [10050] Network is down.
	10051 [10051] Network is unreachable.
	10052 [10052] Net dropped connection or reset.
	10053 [10053] Software caused connection abort.
	10054 [10054] Connection reset by peer.
	10055 [10055] No buffer space available.
	10056 [10056] Socket is already connected.
	10057 [10057] Socket is not connected.
	10058 [10058] Can't send after socket shutdown.
	10059 [10059] Too many references, can't splice.
	10060 [10060] Connection timed out.
	10061 [10061] Connection refused.
	10062 [10062] Too many levels of symbolic links.
	10063 [10063] File name too long.
	10064 [10064] Host is down.
	10065 [10065] No route to host.
	10066 [10066] Directory not empty
	10067 [10067] Too many processes.
	10068 [10068] Too many users.
	10069 [10069] Disc Quota Exceeded.
	10070 [10070] Stale NFS file handle.
	10071 [10071] Too many levels of remote in path.
	10091 [10091] Network subsystem is unavailable.
	10092 [10092] WINSOCK DLL Version out of range.
	10093 [10093] Winsock not loaded yet.
	11001 [11001] Host not found.
	11002 [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
	11003 [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
	11004 [11004] Valid name, no data record (check DNS setup).