SFTP Class

Properties   Methods   Events   Config Settings   Errors  

The SFTP class can be used to transfer files to and from SFTP servers using the SFTP Protocol.

Syntax

ipworksssh.Sftp

Remarks

The SFTP class is the SSH-enabled equivalent of the IPWorks FTP class. The SSHHost and SSHPort properties specify the SSH server to use. The SSHUser and SSHPassword properties allow the client to authenticate itself with the server. The SSHServerAuthentication event and/or SSHAcceptServerHostKey property allow you to check the server identity. Finally, the SSHStatus event provides information about the SSH handshake.

The SFTP class implements a standard SSH File Transfer client.

The first step in using the class is specifying the SSHHost, SSHUser and SSHPassword. The file to upload to or download from is given by the RemoteFile property. The file to download to or upload from is specified by LocalFile. The current path in the server is specified by the RemotePath property.

If LocalFile is set to something other than an empty string, then files are received in LocalFile, otherwise the data is received through the Transfer event. StartTransfer and EndTransfer are fired at the beginning and end of transmission.

Directory listings are received through the DirList event.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

Connected Property (SFTP Class)

This shows whether the class is connected.

Syntax

public boolean isConnected();


public void setConnected(boolean connected);

Default Value

False

Remarks

This property is used to determine whether or not the class is connected to the remote host.

Note: It is recommended to use the Connect or Disconnect method instead of setting this property.

This property is not available at design time.

DirList Property (SFTP Class)

Collection of entries resulting in the last directory listing.

Syntax

public DirEntryList getDirList();

Remarks

This collection is returned after a response is received from the server after a call to ListDirectory. The collection is made up of entries for each listing in the current directory, specified by the RemotePath property.

MaxDirEntries can be used to control the number of directory listings saved.

This collection is indexed from 0 to size -1.

This property is read-only and not available at design time.

FileAttributes Property (SFTP Class)

The attributes of the RemoteFile .

Syntax

public SFTPFileAttributes getFileAttributes();


public void setFileAttributes(SFTPFileAttributes fileAttributes);

Remarks

This property holds the attributes for the file specified by RemoteFile. Before querying this property first call QueryFileAttributes to retrieve the attributes from the server.

To modify the attributes of the file, you may set FileAttributes then call UpdateFileAttributes.

This property is not available at design time.

FileExists Property (SFTP Class)

Returns true if the file specified by RemoteFile exists on the remote server.

Syntax

public boolean isFileExists();

Default Value

False

Remarks

This property returns True if the file exists on the remote server. It returns false if the file does not exist. You must specify the file you wish to check by setting the RemoteFile prior to calling this method.

If there is no session in place, the value of this property will always be false.

This property is read-only and not available at design time.

Firewall Property (SFTP Class)

A set of properties related to firewall access.

Syntax

public Firewall getFirewall();


public void setFirewall(Firewall firewall);

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the class will attempt to connect.

Idle Property (SFTP Class)

The current status of the class.

Syntax

public boolean isIdle();

Default Value

True

Remarks

Idle will be False if the component is currently busy (communicating and/or waiting for an answer), and True at all other times.

This property is read-only.

LocalFile Property (SFTP Class)

The path to a local file for upload/download.

Syntax

public String getLocalFile();


public void setLocalFile(String localFile);

Default Value

""

Remarks

The LocalFile property is used by the Upload and Download methods. The file will only be overwritten if the Overwrite property is set to True.

Example (Setting LocalFile)

SFTPControl.Localfile = "C:\localfile.txt" SFTPControl.RemoteFile = "remotefile.txt" SFTPControl.Download() SFTPControl.Localfile = "C:\localfile2.txt" SFTPControl.RemoteFile = "folder/remotefile2.txt" SFTPControl.Download()

LocalHost Property (SFTP Class)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

public String getLocalHost();


public void setLocalHost(String localHost);

Default Value

""

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

LocalPort Property (SFTP Class)

The TCP port in the local host where the class binds.

Syntax

public int getLocalPort();


public void setLocalPort(int localPort);

Default Value

0

Remarks

This property must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.

Setting this property to 0 (default) enables the system to choose an open port at random. The chosen port will be returned by the LocalPort property after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this property when a connection is active will generate an error.

This property is useful when trying to connect to services that require a trusted port in the client side.

Overwrite Property (SFTP Class)

Whether or not the class should overwrite files during transfer.

Syntax

public boolean isOverwrite();


public void setOverwrite(boolean overwrite);

Default Value

False

Remarks

This property is a value indicating whether or not the class should overwrite LocalFile when downloading, and RemoteFile when uploading. If Overwrite is false, an error will be thrown whenever LocalFile exists before a download operation.

RemoteFile Property (SFTP Class)

The name of the remote file for uploading, downloading, etc.

Syntax

public String getRemoteFile();


public void setRemoteFile(String remoteFile);

Default Value

""

Remarks

The RemoteFile is either an absolute file path, or a relative path based on RemotePath.

A number of methods use RemoteFile as an argument.

Example (Setting RemoteFile)

SFTPControl.Localfile = "C:\localfile.txt" SFTPControl.RemoteFile = "remotefile.txt" SFTPControl.Download() SFTPControl.Localfile = "C:\localfile2.txt" SFTPControl.RemoteFile = "folder/remotefile2.txt" SFTPControl.Download()

Note: This property will also act as a file mask when performing ListDirectory.

Example (Using RemoteFile as a file mask): SFTPControl.RemoteFile = "*.txt" SFTPControl.ListDirectory()

The following special characters are supported for pattern matching:

If these characters need to be used as a literal in a pattern, then they must be escaped by surrounding them with brackets []. Note: "]" and "-" do not need to be escaped. See below for the escape sequences:

For example, to match the value [Something].txt, specify the pattern [[]Something].txt.

RemotePath Property (SFTP Class)

The current path in the SFTP server.

Syntax

public String getRemotePath();


public void setRemotePath(String remotePath);

Default Value

""

Remarks

The RemotePath shows the current working directory on the SFTP server. It can also be used to change the working directory by setting it to an absolute directory path, or a relative path with respect to the existing value of RemotePath.

If the first two bytes of the new path are "..", then a change to one level above in the directory tree is performed.

Setting RemotePath causes the class to send the appropriate command to the remote server only if connected.

Example (Changing Directory)

sftp1.SSHLogon("sftp.server.net", 22); sftp1.ChangeRemotePath("/home/user");

Note:It is recommended to use the ChangeRemotePath method instead of setting this property.

SSHAcceptServerHostKey Property (SFTP Class)

Instructs the class to accept the server host key that matches the supplied key.

Syntax

public Certificate getSSHAcceptServerHostKey();


public void setSSHAcceptServerHostKey(Certificate SSHAcceptServerHostKey);

Remarks

If the host key that will be used by the server is known in advance, this property may be set to accept the expected key. Otherwise the SSHServerAuthentication event should be trapped, and the key should be accepted or refused in the event.

If this property is not set and the SSHServerAuthentication event is not trapped, the server will not be authenticated and the connection will be terminated by the client.

SSHAuthMode Property (SFTP Class)

The authentication method to be used the class when calling SSHLogon .

Syntax

public int getSSHAuthMode();


public void setSSHAuthMode(int SSHAuthMode);


Enumerated values:
  public final static int amNone = 0;
  public final static int amMultiFactor = 1;
  public final static int amPassword = 2;
  public final static int amPublicKey = 3;
  public final static int amKeyboardInteractive = 4;
  public final static int amGSSAPIWithMic = 5;
  public final static int amCustom = 6;
  public final static int amGSSAPIKeyex = 7;

Default Value

2

Remarks

The SSH Authentication specification (RFC 4252) specifies multiple methods by which a user can be authenticated by an SSH server. When a call is made to SSHLogon, the class will connect to the SSH server and establish the security layer. After the connection has been secured, the client will send an authentication request to the SSHHost containing the SSHUser. The server will respond containing a list of methods by which that user may be authenticated.

The class will attempt to authenticate the user by one of those methods based on the value of SSHAuthMode and other property values supplied by the user. Currently, the class supports the following authentication methods:

Example (User/Password Auth): Control.SSHAuthMode = SftpSSHAuthModes.amPassword Control.SSHUser = "username" Control.SSHPassword = "password" Control.SSHLogon("server", 22) Example (Public Key Auth): Control.SSHAuthMode = SftpSSHAuthModes.amPublicKey Control.SSHUser = "username" Control.SSHCert = New Certificate(CertStoreTypes.cstPFXFile, "cert.pfx", "certpassword", "*") Control.SSHLogon("server", 22)

SSHCert Property (SFTP Class)

A certificate to be used for authenticating the SSHUser .

Syntax

public Certificate getSSHCert();


public void setSSHCert(Certificate SSHCert);

Remarks

In order to use public key authentication, SSHCert must contain a Certificate with a valid private key. The certificate's public key value is sent to the server along with a signature produced using the private key. The server will first check to see if the public key values match what is known for the user, and then will attempt to use those values to verify the signature.

Example (User/Password Auth): Control.SSHAuthMode = SftpSSHAuthModes.amPassword Control.SSHUser = "username" Control.SSHPassword = "password" Control.SSHLogon("server", 22) Example (Public Key Auth): Control.SSHAuthMode = SftpSSHAuthModes.amPublicKey Control.SSHUser = "username" Control.SSHCert = New Certificate(CertStoreTypes.cstPFXFile, "cert.pfx", "certpassword", "*") Control.SSHLogon("server", 22)

SSHCompressionAlgorithms Property (SFTP Class)

A comma-separated list containing all allowable compression algorithms.

Syntax

public String getSSHCompressionAlgorithms();


public void setSSHCompressionAlgorithms(String SSHCompressionAlgorithms);

Default Value

"none,zlib"

Remarks

During the SSH handshake, this list will be used to negotiate the compression algorithm to be used between the client and server. This list is used for both directions: client to server and server to client. When negotiating algorithms, each side sends a list of all algorithms it supports or allows. The algorithm chosen for each direction is the first algorithm to appear in the sender's list that the receiver supports, so it is important to list multiple algorithms in preferential order. If no algorithm can be agreed upon, the class will raise an error and the connection will be aborted.

At least one supported algorithm must appear in this list. The following compression algorithms are supported by the class:

• zlib
• zlib@openssh.com
• none

SSHEncryptionAlgorithms Property (SFTP Class)

A comma-separated list containing all allowable encryption algorithms.

Syntax

public String getSSHEncryptionAlgorithms();


public void setSSHEncryptionAlgorithms(String SSHEncryptionAlgorithms);

Default Value

"aes256-ctr,aes192-ctr,aes128-ctr,aes256-cbc,aes192-cbc,aes128-cbc,3des-ctr,3des-cbc,blowfish-cbc,arcfour256,arcfour128,arcfour,cast128-cbc,aes256-gcm@openssh.com,aes128-gcm@openssh.com,chacha20-poly1305@openssh.com"

Remarks

During the SSH handshake, this list will be used to negotiate the encryption algorithm to be used between the client and server. This list is used for both directions: client to server and server to client. When negotiating algorithms, each side sends a list of all algorithms it supports or allows. The algorithm chosen for each direction is the first algorithm to appear in the sender's list that the receiver supports, so it is important to list multiple algorithms in preferential order. If no algorithm can be agreed upon, the class will raise an error and the connection will be aborted.

At least one supported algorithm must appear in this list. The following encryption algorithms are supported by the class:

SSHHost Property (SFTP Class)

The address of the SSH host.

Syntax

public String getSSHHost();


public void setSSHHost(String SSHHost);

Default Value

""

Remarks

The SSHHost property specifies the IP address (IP number in dotted internet format) or Domain Name of the remote host. It is set before a connection is attempted and cannot be changed once a connection is established.

If the SSHHost property is set to a Domain Name, a DNS request is initiated, and upon successful termination of the request, the SSHHost property is set to the corresponding address. If the search is not successful, an error is returned.

The SSHHost must be the same host that will be assumed for SSH as for the remote service being connected to.

SSHPassword Property (SFTP Class)

The password for SSH password-based authentication.

Syntax

public String getSSHPassword();


public void setSSHPassword(String SSHPassword);

Default Value

""

Remarks

SSHPassword specifies the password which is used to authenticate the client to the SSH server.

SSHPort Property (SFTP Class)

The port on the SSH server where the SSH service is running; by default, 22.

Syntax

public int getSSHPort();


public void setSSHPort(int SSHPort);

Default Value

22

Remarks

The SSHPort specifies a service port on the SSH host to connect to.

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

SSHUser Property (SFTP Class)

The username for SSH authentication.

Syntax

public String getSSHUser();


public void setSSHUser(String SSHUser);

Default Value

""

Remarks

SSHUser specifies the username which is used to authenticate the client to the SSH server. This property is required.

Example (User/Password Auth): Control.SSHAuthMode = SftpSSHAuthModes.amPassword Control.SSHUser = "username" Control.SSHPassword = "password" Control.SSHLogon("server", 22) Example (Public Key Auth): Control.SSHAuthMode = SftpSSHAuthModes.amPublicKey Control.SSHUser = "username" Control.SSHCert = New Certificate(CertStoreTypes.cstPFXFile, "cert.pfx", "certpassword", "*") Control.SSHLogon("server", 22)

StartByte Property (SFTP Class)

The offset in bytes at which to begin the Upload or Download.

Syntax

public long getStartByte();


public void setStartByte(long startByte);

Default Value

0

Remarks

The StartByte property is used by the Upload and Download methods to determine at what offset to begin the transfer. This allows for resuming both uploads and downloads. The value of this property is reset to 0 after a successful transfer. StartByte is not valid for use with Append.

When downloading, this property can be used in conjunction with the TransferredDataLimit configuration setting in order to only download a specific range of data from the current RemoteFile.

Timeout Property (SFTP Class)

A timeout for the class.

Syntax

public int getTimeout();


public void setTimeout(int timeout);

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the class throws an exception.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Append Method (Sftp Class)

Append data from LocalFile to a remote file RemoteFile on an SFTP server.

Syntax

public void append();

Remarks

Similar to the Upload method but the local file specified by LocalFile is appended to RemoteFile on the server as opposed to replacing it as done by the Upload method. RemoteFile is either an absolute path on the server, or a path relative to RemotePath. The server will create a file with that name if it doesn't already exist (similar to Upload).

If there is no SSH session in place, one is automatically created by the component first.

ChangeRemotePath Method (Sftp Class)

Changes the current path on the server.

Syntax

public void changeRemotePath(String remotePath);

Remarks

This method changes the current path on the server to the specified RemotePath. When called, the class will issue a command to the server to change the directory. The RemotePath parameter may hold an absolute or relative path.

Absolute Paths

If the path begins with a / it is considered and absolute path and must specify the entire path from the root of the server. For instance:

component.ChangeRemotePath("/home/testuser/myfolder");

Relative Paths

If the path does not begin with a / it is considered a relative path and is resolved in relation to the current directory. For instance a value of myfolder will indicate a sub-folder of the current directory. The special value .. refers to the parent directory of the current path. For instance:

//Change to the 'myfolder' sub-directory component.ChangeRemotePath("myfolder"); //Navigate up two levels and then into the 'another/folder' path. component.ChangeRemotePath("../../another/folder");

CheckFileExists Method (Sftp Class)

Returns if the file specified by RemoteFile exists on the remote server.

Syntax

public boolean checkFileExists();

Remarks

This property returns true if the file exists on the remote server. It returns false if the file does not exist. You must specify the file you wish to check by setting the RemoteFile prior to calling this method.

If there is no session in place, the value of this property will always be false.

Config Method (Sftp Class)

Sets or retrieves a configuration setting.

Syntax

public String config(String configurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (Sftp Class)

Connects to the SSH host without logging in.

Syntax

public void connect();

Remarks

This method establishes a connection with the SSHHost but does not log in. In most cases it is recommended to use the SSHLogon method which will both establish a connection and log in to the server.

This method may be useful in cases where it is desirable to separate the connection and logon operations, for instance confirming a host is available by first creating the connection.

CreateFile Method (Sftp Class)

Creates a file on the SFTP server.

Syntax

public void createFile(String fileName);

Remarks

This method creates an empty file on the server with the name specified by the FileName parameter.

To upload a file with content use Upload instead.

DecodePacket Method (Sftp Class)

Decodes a hex-encoded SSH packet.

Syntax

public byte[] decodePacket(String encodedPacket);

Remarks

This method is used to decode an SSH packet created by EncodePacket.

Note: This method is only applicable for reading and creating SSH packets for use within the SSHCustomAuth event.

DeleteFile Method (Sftp Class)

Remove a file specified by FileName from an SFTP server.

Syntax

public void deleteFile(String fileName);

Remarks

The remote file or directory specified by FileName is deleted. FileName is either an absolute path on the server, or a path relative to RemotePath.

If there is no SSH session in place, one is automatically created by the component first.

Disconnect Method (Sftp Class)

This method disconnects from the server without first logging off.

Syntax

public void disconnect();

Remarks

This method immediately disconnects from the server without first logging off.

In most cases the SSHLogoff method should be used to logoff and disconnect from the server. Call the Disconnect method in cases where it is desirable to immediately disconnect without first logging off.

DoEvents Method (Sftp Class)

Processes events from the internal message queue.

Syntax

public void doEvents();

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Download Method (Sftp Class)

Download a RemoteFile from an SFTP server.

Syntax

public void download();

Remarks

The remote file specified by RemoteFile is downloaded to the local file specified by LocalFile, or it is retrieved through the Transfer event, if the LocalFile property is "" (empty string). RemoteFile is either an absolute path on the server, or a path relative to RemotePath.

If there is no SSH session in place, one is automatically created by the component first.

Example (Download a File)

SFTPControl.Localfile = "C:\localfile.txt" SFTPControl.RemoteFile = "remotefile.txt" SFTPControl.Download() SFTPControl.Localfile = "C:\localfile2.txt" SFTPControl.RemoteFile = "folder/remotefile2.txt" SFTPControl.Download()

EncodePacket Method (Sftp Class)

Hex encodes an SSH packet.

Syntax

public String encodePacket(byte[] packet);

Remarks

This method is used to encode a raw SSH packet created by SetSSHParam.

Note: This method is only applicable for reading and creating SSH packets for use within the SSHCustomAuth event.

GetSSHParam Method (Sftp Class)

Used to read a field from an SSH packet's payload.

Syntax

public String getSSHParam(byte[] payload, String field);

Remarks

This method is used to read the value of a particular field from an SSH packet's payload. Payload should contain the full payload of a packet received by an event such as SSHChannelRequest. Field is the name of a field to be read out of the packet.

The following is a list of the names of well-known channel request field names and their encodings:

The remaining fields that are available in the payload are dependent upon the value of RequestType.

pty-req

Pty-req is a request to open a pseudo terminal on the specified channel. The following fields are available:

x11-req

X11-req is a request to forward x11 sessions over a channel. The following fields are available:

env

Env is a request to set an environment variable to be passed into a shell that may be started later. The following fields are available:

exec

Exec is a request to execute a command on the channel using the authenticated user's shell. The following field is available:

subsystem

Subsystem is a request to start a subsystem on the specified channel. The following field is available:

xon-xoff

Instructs the server to allow or disallow control-S/control-Q style flow control. The following field is available:

signal

Sends a signal to the remote process/service. The following field is available:

If the packet type is not well known, Field should start with the special character "%" and contain a comma-separated list of field types as defined in SetSSHParam. For example, reading out the X11AuthProtocol of an x11-req payload, you can use "%s,f".

Note: the return value is a string encoded the same way as the FieldValue param in SetSSHParam.

Note: This method is only applicable for reading and creating SSH packets for use within the SSHCustomAuth event.

GetSSHParamBytes Method (Sftp Class)

Used to read a field from an SSH packet's payload.

Syntax

public byte[] getSSHParamBytes(byte[] payload, String field);

Remarks

This method is the same as calling GetSSHParam, but returns raw bytes instead of strings.

Note: This method is only applicable for reading and creating SSH packets for use within the SSHCustomAuth event.

Interrupt Method (Sftp Class)

Interrupt the current method.

Syntax

public void interrupt();

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ListDirectory Method (Sftp Class)

List the current directory specified by RemotePath on an SFTP server.

Syntax

public void listDirectory();

Remarks

A listing is requested for the directory (or file mask) specified in RemoteFile. RemoteFile is either an absolute path on the server, or a path relative to RemotePath. The file listing is received through the DirList event.

If there is no SSH session in place, one is automatically created by the component first.

MakeDirectory Method (Sftp Class)

Create a directory on an SFTP server.

Syntax

public void makeDirectory(String newDir);

Remarks

A directory with path specified by NewDir is created on the SFTP server. NewDir is either an absolute path on the server, or a path relative to RemotePath.

If there is no SSH session in place, one is automatically created by the component first.

QueryFileAttributes Method (Sftp Class)

Queries the server for the attributes of RemoteFile .

Syntax

public void queryFileAttributes();

Remarks

This method queries the server for attributes of RemoteFile. After calling this method FileAttributes will be populated with the values returned by the server.

To update attributes modify the desired values in FileAttributes and call UpdateFileAttributes.

QueueFile Method (Sftp Class)

Adds a file to the transfer queue.

Syntax

public void queueFile(String localFile, String remoteFile);

Remarks

This method adds a file to the queue of files that will be transferred.

It is not required to use this method, however this extends the ability of the class to allow for multiple simultaneous file transfers.

To simply transfer a file without using this method you need only set LocalFile, RemoteFile, and call Upload or Download as appropriate. This method allows you to instead queue multiple files before beginning a transfer.

When a file is queued it will not be transferred until the Upload or Download method is called. If multiple files are queued the files will be transferred simultaneously. The SimultaneousTransferLimit setting controls the maximum number of simultaneous transfers.

The Upload or Download method will not return until the Queue has been completely processed. This method may be called from within events in order to add additional files to the Queue before processing is complete.

To clear the queue call ResetQueue. This will not affect current transfers.

To cancel and individual file transfer set the Cancel parameter of the Transfer event to true. The rest of the queue will continue to process as normal.

The Interrupt method may be called to immediately stop all current transfers.

In the event of a file specific error the Error event will fire and the LocalFile and RemoteFile event parameters can be used to identify the file to which the error applies.

RemoveDirectory Method (Sftp Class)

Remove a directory specified by DirName from an SFTP server.

Syntax

public void removeDirectory(String dirName);

Remarks

A directory with path specified by DirName is deleted on the SFTP server. DirName is either an absolute path on the server, or a path relative to RemotePath.

If there is no SSH session in place, one is automatically created by the component first.

RenameFile Method (Sftp Class)

Change the name of RemoteFile to NewName .

Syntax

public void renameFile(String newName);

Remarks

The name of remote file or folder specified by RemoteFile is changed to NewName. RemoteFile and NewName are either absolute paths on the server, or a path relative to RemotePath.

If there is no SSH session in place, one is automatically created by the component first.

Reset Method (Sftp Class)

Reset the class.

Syntax

public void reset();

Remarks

This method will reset the class's properties to their default values.

ResetQueue Method (Sftp Class)

Resets the queue of files to be transferred.

Syntax

public void resetQueue();

Remarks

This method will remove all files from the transfer queue.

Calling this method will clear all files that were queued by QueueFile. Calling this method will not affect current transfers.

SetDownloadStream Method (Sftp Class)

Sets the stream to which the downloaded data from the server will be written.

Syntax

public void setDownloadStream(java.io.OutputStream downloadStream);

Remarks

If a download stream is set before the Download method is called, the downloaded data will be written to the stream. The stream should be open and normally set to position 0.

The class will automatically close this stream if CloseStreamAfterTransfer is true (default). If the stream is closed, you will need to call SetDownloadStream again before calling Download again.

The downloaded content will be written starting at the current position in the stream.

Note: SetDownloadStream and LocalFile will reset the other.

SetSSHParam Method (Sftp Class)

Used to write a field to the end of a payload.

Syntax

public byte[] setSSHParam(byte[] payload, String fieldType, String fieldValue);

Remarks

This method is used to build the payload portion of an SSH packet to be sent later by a call to SendSSHPacket. Payload should contain the result of a previous call to SetSSHParam. FieldType is a string defining the type of field to be written to the packet. FieldValue should be the string representation of the field to be written.

The following is a list of supported field types and a description of how FieldValue should be encoded:

Note: integer values may be encoded in hexadecimal by prefixing "0x" to the beginning of the string, otherwise the value is assumed to be base-10.

Note: This method is only applicable for reading and creating SSH packets for use within the SSHCustomAuth event.

SetUploadStream Method (Sftp Class)

Sets the stream from which the class will read data to upload to the server.

Syntax

public void setUploadStream(java.io.InputStream uploadStream);

Remarks

If an upload stream is set before the Upload method is called, the content of the stream will be read by the class and uploaded to the server. The stream should be open and normally set to position 0. The class will automatically close this stream if CloseStreamAfterTransfer is true (default). If the stream is closed, you will need to call SetUploadStream again before calling Upload again. The content of the stream will be read from the current position all the way to the end and no bytes will be skipped.

Note: SetUploadStream and LocalFile will reset the other.

SSHLogoff Method (Sftp Class)

Logoff from the SSH server.

Syntax

public void SSHLogoff();

Remarks

Logoff from the SSH server. If that fails, the connection is terminated by the local host.

SSHLogon Method (Sftp Class)

Logon to the SSHHost using the current SSHUser and SSHPassword .

Syntax

public void SSHLogon(String SSHHost, int SSHPort);

Remarks

Logon to the SSH server using the current SSHUser and SSHPassword. This will perform the SSH handshake and authentication.

Example (Logging On)

SSHClient.SSHUser = "username" SSHClient.SSHPassword = "password" SSHClient.SSHLogon("sshHost", sshPort)

UpdateFileAttributes Method (Sftp Class)

Instructs the class to send the FileAttributes to the server.

Syntax

public void updateFileAttributes();

Remarks

When UpdateFileAttributes is called, the class will send the value of FileAttributes to the server.

Upload Method (Sftp Class)

Upload a file specified by LocalFile to an SFTP server.

Syntax

public void upload();

Remarks

The local file specified by LocalFile is uploaded to the remote file specified by RemoteFile. RemoteFile is either an absolute path on the server, or a path relative to RemotePath.

If there is no SSH session in place, one is automatically created by the component first.

If you want to append to a server file, please refer to the Append method.

Example (Upload a File)

FTPControl.LocalFile = "C:\\localfile.txt" FTPControl.RemoteFile = "remotefile.txt" FTPControl.Upload() FTPControl.LocalFile = "C:\\localfile2.txt" FTPControl.RemoteFile = "folder/remotefile2.txt" FTPControl.Upload()

Connected Event (Sftp Class)

This event is fired immediately after a connection completes (or fails).

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void connected(SftpConnectedEvent e) {}
  ...
}

public class SftpConnectedEvent {
  public int statusCode;
  public String description;
}

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

ConnectionStatus Event (Sftp Class)

This event is fired to indicate changes in the connection state.

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void connectionStatus(SftpConnectionStatusEvent e) {}
  ...
}

public class SftpConnectionStatusEvent {
  public String connectionEvent;
  public int statusCode;
  public String description;
}

Remarks

The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

DirList Event (Sftp Class)

Fired when a directory entry is received.

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void dirList(SftpDirListEvent e) {}
  ...
}

public class SftpDirListEvent {
  public String dirEntry;
  public String fileName;
  public boolean isDir;
  public long fileSize;
  public String fileTime;
  public boolean isSymlink;
}

Remarks

The DirList events are fired when a directory listing is received as a response to a ListDirectory.

The StartTransfer and EndTransfer events mark the beginning and end of the event stream.

The DirEntry parameter contains the filename when ListDirectory is called.

The class tries to fill out the FileName, IsDir, FileSize, and FileTime parameters when calling the ListDirectory method.

The format of the FileTime parameter returned by the class can be controlled through the FileTimeFormat configuration setting. If no format is specified, the class will format the date dependent on the year. If the filetime is in the same year, it will be formatted as "MMM dd HH:mm", otherwise it will be formatted as "MMM dd yyyy".

IsSymlink indicates whether the entry is a symbolic link. When the entry is a symbolic link the value of IsDir will always be False since this information is not returned in the directory listing. To inspect a symlink to determine if it is a link to a file or folder set RemoteFile and query the IsDir field.

Disconnected Event (Sftp Class)

This event is fired when a connection is closed.

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void disconnected(SftpDisconnectedEvent e) {}
  ...
}

public class SftpDisconnectedEvent {
  public int statusCode;
  public String description;
}

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.

Please refer to the Error Codes section for more information.

EndTransfer Event (Sftp Class)

Fired when a file completes downloading/uploading.

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void endTransfer(SftpEndTransferEvent e) {}
  ...
}

public class SftpEndTransferEvent {
  public int direction;
  public String localFile;
  public String remoteFile;
}

Remarks

The EndTransfer event fires when either an upload or a download operation completes. This is when the file finishes transferring and/or a directory listing is finished.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

LocalFile identifies the local file. RemoteFile is the remote file.

Error Event (Sftp Class)

Information about errors during data delivery.

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void error(SftpErrorEvent e) {}
  ...
}

public class SftpErrorEvent {
  public int errorCode;
  public String description;
  public String localFile;
  public String remoteFile;
}

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class throws an exception.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

LocalFile identifies the local file. RemoteFile is the remote file.

Log Event (Sftp Class)

Fires once for each log message.

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void log(SftpLogEvent e) {}
  ...
}

public class SftpLogEvent {
  public int logLevel;
  public String message;
  public String logType;
}

Remarks

This event fires once for each log messages generated by the class. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the detail level of the message. Possible values are:

Message is the log message.

LogType is reserved for future use.

SSHCustomAuth Event (Sftp Class)

Fired when the class is doing custom authentication.

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void SSHCustomAuth(SftpSSHCustomAuthEvent e) {}
  ...
}

public class SftpSSHCustomAuthEvent {
  public String packet;
}

Remarks

SSHCustomAuth is fired during the user authentication stage of the SSH logon process if SSHAuthMode is set to amCustom. Packet contains the raw last SSH packet sent by the server, in HEX-encoded format.

The client should create a new raw SSH packet to send to the server and set Packet to the HEX-encoded representation of the packet to send.

In all cases, Packet will start with the message type field.

To read the incoming packet call DecodePacket and then use the GetSSHParam and GetSSHParamBytes methods. To create a packet use the SetSSHParam method and then call EncodePacket to obtain a HEX-encoded value and assign this to the Packet parameter.

SSHKeyboardInteractive Event (Sftp Class)

Fired when the class receives a request for user input from the server.

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void SSHKeyboardInteractive(SftpSSHKeyboardInteractiveEvent e) {}
  ...
}

public class SftpSSHKeyboardInteractiveEvent {
  public String name;
  public String instructions;
  public String prompt;
  public String response;
  public boolean echoResponse;
}

Remarks

SSHKeyboardInteractive is fired during the user authentication stage of the SSH logon process. During authentication, the class will request a list of available authentication methods for the SSHUser. For example, if the SSHHost responds with "keyboard-interactive", the class will fire this event to allow the client application to set the password.

During authentication, the SSH server may respond with a request for the user's authentication information. Name is a server-provided value associated with the authentication method such as "CRYPTOCard Authentication". Instructions will contain specific instructions, also supplied by the server, for how the user should respond.

Along with these values, the server will also send at least one input Prompt to be displayed to and filled out by the user. Response should be set to the user's input, and will be sent back in the user authentication information response. EchoResponse is a server recommendation for whether or not the user's response should be echoed back during input.

Note: the server may send several prompts in a single packet. The class will fire the SSHKeyboardInteractive event once for each prompt.

SSHServerAuthentication Event (Sftp Class)

Fired after the server presents its public key to the client.

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void SSHServerAuthentication(SftpSSHServerAuthenticationEvent e) {}
  ...
}

public class SftpSSHServerAuthenticationEvent {
  public byte[] hostKey;
  public String fingerprint;
  public String keyAlgorithm;
  public String certSubject;
  public String certIssuer;
  public String status;
  public boolean accept;
}

Remarks

This event is where the client can decide whether to continue with the connection process or not. If the public key is known to be a valid key for the SSH server, Accept should be set to True within the event. Otherwise, the server will not be authenticated and the connection will be broken.

Accept will be True only if either HostKey or Fingerprint is identical to the value of SSHAcceptServerHostKey.

Accept may be set to True manually to accept the server host key.

Note that SSH's security inherently relies on client verification of the host key. Ignoring the host key and always setting Accept to true is strongly discouraged, and could cause potentially serious security vulnerabilities in your application. It is recommended that clients maintain a list of known keys for each server and check HostKey against this list each time a connection is attempted.

Host Key contains the full binary text of the key, in the same format used internally by SSH.

Fingerprint holds the SHA-256 hash of HostKey in the hex-encoded form: 0a:1b:2c:3d. To configure the hash algorithm used to calculate this value see SSHFingerprintHashAlgorithm.

KeyAlgorithm identifies the host key algorithm. Supported values are:

• ssh-rsa
• ssh-dss
• rsa-sha2-256
• rsa-sha2-512
• x509v3-sign-rsa
• x509v3-sign-dss
• ecdsa-sha2-nistp256
• ecdsa-sha2-nistp384
• ecdsa-sha2-nistp521

CertSubject is the subject of the certificate. This is only applicable when KeyAlgorithm is "x509v3-sign-rsa" or "x509v3-sign-dss".

CertIssuer is the issuer of the certificate. This is only applicable when KeyAlgorithm is "x509v3-sign-rsa" or "x509v3-sign-dss".

Status is reserved for future use.

SSHStatus Event (Sftp Class)

Shows the progress of the secure connection.

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void SSHStatus(SftpSSHStatusEvent e) {}
  ...
}

public class SftpSSHStatusEvent {
  public String message;
}

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

StartTransfer Event (Sftp Class)

Fired when a file starts downloading/uploading.

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void startTransfer(SftpStartTransferEvent e) {}
  ...
}

public class SftpStartTransferEvent {
  public int direction;
  public String localFile;
  public String remoteFile;
}

Remarks

The StartTransfer event fires when a Data Interface connection is created. This is when the file starts transferring and/or a directory listing is started.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

LocalFile identifies the local file. RemoteFile is the remote file.

Transfer Event (Sftp Class)

Fired during file download/upload.

Syntax

public class DefaultSftpEventListener implements SftpEventListener {
  ...
  public void transfer(SftpTransferEvent e) {}
  ...
}

public class SftpTransferEvent {
  public int direction;
  public String localFile;
  public String remoteFile;
  public long bytesTransferred;
  public int percentDone;
  public byte[] text;
  public boolean cancel;
}

Remarks

One or more Transfer events are fired during file transfer. The BytesTransferred parameter shows the number of bytes transferred since the beginning of the transfer.

Text contains the portion of the file data being delivered.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

LocalFile identifies the local file. RemoteFile is the remote file.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

To cancel the current transfer set Cancel to true.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

Constructors

public Certificate();

Creates a Certificate instance whose properties can be set. This is useful for use with CERTMGR when generating new certificates.

public Certificate( certificateFile);

Opens CertificateFile and reads out the contents as an X.509 public key.

public Certificate( certificateData);

Parses CertificateData as an X.509 public key.

public Certificate( certStoreType,  store,  storePassword,  subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  store,  storePassword,  subject,  configurationString);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. ConfigurationString is a newline separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CryptoAPI option. The default value is True (the key is persisted). "Thumbprint" - an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to cstUser, cstMachine, cstPublicKeyFile, and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  store,  storePassword,  encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

public Certificate( certStoreType,  storeBlob,  storePassword,  subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. StoreBlob is a string (binary- or Base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  storeBlob,  storePassword,  subject,  configurationString);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. StoreBlob is a string (binary- or Base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN).

public Certificate( certStoreType,  storeBlob,  storePassword,  encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or Base64-encoded) containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

DirEntry Type

This is a listing in a directory returned from the server.

Remarks

The DirEntry listings are filled out by the class when a directory listing is received as a response to a ListDirectory or ListDirectoryLong call. The server returns a listing for each directory and file at the current path that exists. This listing is parsed into a directory entry.

If ListDirectoryLong is called, all of the fields listed below are supplied by the server. When the ListDirectory method is called, however, the FileSize, FileTime, and IsDir fields all are left empty by the server. In this case, the only field it returns is the FileName.

The full line for the directory entry is provided by the Entry field.

Fields

Constructors

public DirEntry();

Firewall Type

The firewall the class will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall Host and the FirewallType.

Fields

Constructors

public Firewall();

SFTPFileAttributes Type

A set of attributes for a file existing on an SFTP server..

Remarks

This type describes a file residing on an SFTP server.

Fields

Config Settings (Sftp Class)

SFTP Config Settings

SSHClient Config Settings

*SSH-1.99-*,*SSH-2.0-*,*SSH-2.99-*

TCPClient Config Settings

Socket Config Settings

Base Config Settings

Trappable Errors (Sftp Class)

SFTP Errors

SSHClient Errors

TCPClient Errors

TCP/IP Errors