Docs

IPWorks SSH 2022 Qt Edition

Version 22.0 [Build 8172]

SSHDaemon Class

Properties   Methods   Events   Configuration Settings   Errors  

The SSHDaemon class is used to create Secure Shell (SSH) servers. The class handles multiple simultaneous connections on the same TCP/IP port (service port). It is designed to balance the load between connections for a fast, powerful server.

Syntax

SSHDaemon

Remarks

The SSHDaemon class is the SSH-enabled equivalent of the IPWorks IPDaemon class, extended by a set of new properties and events that deal with SSH security. The SSHCompressionAlgorithms and SSHEncryptionAlgorithms properties determine which protocols are enabled for the SSH handshake. The SSHCert* properties are used to select a certificate for the server (please note that a valid certificate MUST be selected before the server can function). The SSHUserAuthRequest event will allow you to use authenticate clients using digital certificates or passwords. Finally, the SSHStatus event provides information about the SSH handshake and underlying protocol notifications.

By default, each instance of SSHDaemon can handle up to 1000 simultaneous incoming connections (this number may be increased up to 100,000, or decreased to a lower value by using the MaxConnections configuration setting).

SSH connections are identified by a ConnectionId. Events relating to these connections as a whole will use the ConnectionId to identify the specific connection. Connections may also contained one or more multiplexed channels, which are identified by a ChannelId. Channel-level events will specify the ChannelId to which they relate.

SSHDaemon can start to listen on a port by setting the Listening property to True. When a remote host asks for a connection, the ConnectionRequest event is fired. At that point, the connection can either be accepted or rejected. If the connection is accepted, a ConnectionId is assigned, and communication can start. From this point on, the operation is very similar to SSHClient. Data can be sent to an individual SSHChannel using SendChannelData. The address and port of the incoming connection can be found by querying the ClientRemoteHost and ClientRemotePort properties.

Note: Server components are designed to process events as they occur. To ensure events are processed in a timely manner DoEvents should be called in a loop after the server is started.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

SSHChannelCountThe number of records in the arrays.
BytesSentThe number of bytes actually sent after a sending channel data.
ChannelIdAn id generated by the class to identify the current SSH channel.
DataToSendA string of data to be sent to the remote host.
ReadyToSendThis property is True when data can be sent over the SSH Channel.
RecordLengthThe length of received data records.
ServiceThis property holds the channel type that was requested when opening the channel.
ConnectionBacklogThe maximum number of pending connections maintained by the TCP/IP subsystem.
SSHConnectionCountThe number of records in the SSHConnection arrays.
SSHConnectionConnectedUsed to disconnect individual connections and/or show their status.
SSHConnectionLocalAddressThis property shows the IP address of the interface through which the connection is passing.
SSHConnectionRemoteHostThe RemoteHost shows the IP address of the remote host through which the connection is coming.
SSHConnectionRemotePortThe RemotePort shows the TCP port on the remote host through which the connection is coming.
SSHConnectionTimeoutA timeout for the class.
DefaultAuthMethodsSpecifies the supported authentication methods.
DefaultTimeoutAn initial timeout value to be used by incoming connections.
KeyboardInteractiveMessageThe instructions to send to the client during keyboard-interactive authentication.
KeyboardInteractivePromptCountThe number of records in the KeyboardInteractivePrompt arrays.
KeyboardInteractivePromptEchoSpecifies if the client should echo the value entered by the user or not.
KeyboardInteractivePromptPromptThe prompt label/text the client should present to the user.
ListeningIf True, the class accepts incoming connections on LocalPort.
LocalHostThe name of the local host or user-assigned IP interface through which connections are initiated or accepted.
LocalPortThe TCP port in the local host where the class listens.
SSHCertEncodedThis is the certificate (PEM/base64 encoded).
SSHCertStoreThis is the name of the certificate store for the client certificate.
SSHCertStorePasswordIf the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SSHCertStoreTypeThis is the type of certificate store for this certificate.
SSHCertSubjectThis is the subject of the certificate used for client authentication.
SSHCompressionAlgorithmsA comma-separated list containing all allowable compression algorithms.
SSHEncryptionAlgorithmsA comma-separated list containing all allowable encryption algorithms.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

ChangeRecordLengthChanges the length of received data records.
CloseChannelCloses a existing SSHChannel .
ConfigSets or retrieves a configuration setting.
DisconnectDisconnect the specified client.
DoEventsProcesses events from the internal message queue.
ExchangeKeysCauses the class to exchange a new set of session keys on the specified connection.
GetSSHParamUsed to read a field from an SSH packet's payload.
GetSSHParamBytesUsed to read a field from an SSH packet's payload.
OpenChannelOpens a new SSHChannel .
ResetReset the class.
SendBytesSends binary data to the specified channel.
SendChannelDataUsed to send data over an SSH channel.
SendSSHPacketUsed to send an encoded SSH packet to the server.
SendTextSends text to the specified channel.
SetSSHParamUsed to write a field to the end of a payload.
ShutdownShuts down the server.
StartListeningStarts listening for incoming connections.
StopListeningStops listening for new connections.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

ConnectedFired immediately after a connection completes (or fails).
ConnectionRequestFired when a request for connection comes from a remote host.
DisconnectedFired when a connection is closed.
ErrorInformation about errors during data delivery.
LogFires once for each log message.
SSHChannelClosedFired when a channel is closed.
SSHChannelDataInFired when data is received on an SSH channel.
SSHChannelEOFFired when the remote peer signals the end of the data stream for the channel.
SSHChannelOpenedFired when a channel is successfully opened.
SSHChannelOpenRequestFired when a client attempts to open a new channel.
SSHChannelReadyToSendFired when the class is ready to send data.
SSHChannelRequestFired when the SSHHost sends a channel request to the client.
SSHChannelRequestedFired if the SSHChannelRequest was successful, any further processing for the channel request should be done here.
SSHServiceRequestFired when a client requests a service to be started.
SSHStatusShows the progress of the secure connection.
SSHUserAuthRequestFires when a client attempts to authenticate a connection.

Configuration Settings


The following is a list of configuration settings for the class with short descriptions. Click on the links for further details.

AltSSHCertCountThe number of records in the AltSSHCert configuration settings.
AltSSHCertStore[i]The name of the certificate store.
AltSSHCertStorePassword[i]The password used to open the certificate store.
AltSSHCertStoreType[i]The type of certificate store.
AltSSHCertSubject[i]The alternative certificate subject.
DefaultIdleTimeoutSpecifies the default idle timeout for inactive clients.
KeyboardInteractivePrompts[ConnectionId]Specifies custom keyboard-interactive prompts for particular connections.
KeyRenegotiationThresholdSets the threshold for the SSH Key Renegotiation.
LogLevelSpecifies the level of detail that is logged.
MaxAuthAttemptsThe maximum authentication attempts allowed before forcing a disconnect.
ServerSSHVersionStringThe SSH version string sent to connecting clients.
SSHKeepAliveCountMaxThe maximum number of keep alive packets to send without a response.
SSHKeepAliveIntervalThe interval between keep alive packets.
SSHKeyExchangeAlgorithmsSpecifies the supported key exchange algorithms.
SSHMacAlgorithmsSpecifies the supported Mac algorithms.
SSHPublicKeyAlgorithmsSpecifies the supported public key algorithms.
SSHVersionPatternThe pattern used to match the remote host's version string.
UserAuthBanner[ConnectionId]A custom user authentication banner.
AllowedClientsA comma-separated list of host names or IP addresses that can access the class.
BindExclusivelyWhether or not the class considers a local port reserved for exclusive use.
DefaultConnectionTimeoutThe inactivity timeout applied to the SSL handshake.
InBufferSizeThe size in bytes of the incoming queue of the socket.
KeepAliveIntervalThe retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTimeThe inactivity time in milliseconds before a TCP keep-alive packet is sent.
MaxConnectionsThe maximum number of connections available.
OutBufferSizeThe size in bytes of the outgoing queue of the socket.
TcpNoDelayWhether or not to delay when sending packets.
UseIPv6Whether to use IPv6.
BuildInfoInformation about the product's build.
CodePageThe system code page used for Unicode to Multibyte translations.
LicenseInfoInformation about the current license.
UseInternalSecurityAPITells the class whether or not to use the system security libraries or an internal implementation.

SSHChannelCount Property (SSHDaemon Class)

The number of records in the arrays.

Syntax

int GetSSHChannelCount();

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at SSHChannelCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

BytesSent Property (SSHDaemon Class)

The number of bytes actually sent after a sending channel data.

Syntax

int GetBytesSent(int iSSHChannelId);

Default Value

0

Remarks

The number of bytes actually sent after a sending channel data.

The SSHChannelId parameter specifies the index of the item in the array. The size of the array is controlled by the SSHChannelCount property.

This property is read-only and not available at design time.

Data Type

Integer

ChannelId Property (SSHDaemon Class)

An id generated by the class to identify the current SSH channel.

Syntax

QString GetChannelId(int iSSHChannelId);

Default Value

""

Remarks

An id generated by the class to identify the current SSH channel. This id is unique to this channel.

The SSHChannelId parameter specifies the index of the item in the array. The size of the array is controlled by the SSHChannelCount property.

This property is read-only and not available at design time.

Data Type

String

DataToSend Property (SSHDaemon Class)

A string of data to be sent to the remote host.

Syntax

int SetDataToSend(int iSSHChannelId, QByteArray qbaDataToSend);

Default Value

""

Remarks

A string of data to be sent to the remote host. Write-only property.

Assigning a string to the DataToSend makes the class send the string to the remote host.

Note:It is recommended to use the SendText or SendBytes method instead of setting this property.

The SSHChannelId parameter specifies the index of the item in the array. The size of the array is controlled by the SSHChannelCount property.

This property is write-only and not available at design time.

Data Type

Byte Array

ReadyToSend Property (SSHDaemon Class)

This property is True when data can be sent over the SSH Channel.

Syntax

bool GetReadyToSend(int iSSHChannelId);

Default Value

false

Remarks

This property is True when data can be sent over the SSH Channel.

When Timeout is set to 0 (asynchronous) sending data may result in an error if the channel or underlying socket cannot accept more data to send. Monitor SSHChannelReadyToSend or ReadyToSend to determine when data can be sent again.

When Timeout is set to a positive value the class will block when sending data until the data can be successfully sent and SSHChannelReadyToSend and ReadyToSend do not need to be monitored.

The SSHChannelId parameter specifies the index of the item in the array. The size of the array is controlled by the SSHChannelCount property.

This property is read-only and not available at design time.

Data Type

Boolean

RecordLength Property (SSHDaemon Class)

The length of received data records.

Syntax

int GetRecordLength(int iSSHChannelId);
int SetRecordLength(int iSSHChannelId, int iRecordLength);

Default Value

0

Remarks

The length of received data records. If set to a positive value, this setting defines the length of data records to be received. The class will accumulate data until RecordLength is reached and only then fire the SSHChannelDataIn event with data of length RecordLength. This allows data to be received as records of known length. This value can be changed at any time, including within the SSHChannelDataIn event.

The default value is 0, meaning this setting is not used.

Note:It is recommended to use the ChangeRecordLength method instead of setting this property.

The SSHChannelId parameter specifies the index of the item in the array. The size of the array is controlled by the SSHChannelCount property.

This property is not available at design time.

Data Type

Integer

Service Property (SSHDaemon Class)

This property holds the channel type that was requested when opening the channel.

Syntax

QString GetService(int iSSHChannelId);

Default Value

""

Remarks

This property holds the channel type that was requested when opening the channel. For instance "session" or "forwarded-tcpip".

The SSHChannelId parameter specifies the index of the item in the array. The size of the array is controlled by the SSHChannelCount property.

This property is read-only and not available at design time.

Data Type

String

ConnectionBacklog Property (SSHDaemon Class)

The maximum number of pending connections maintained by the TCP/IP subsystem.

Syntax

int GetConnectionBacklog();
int SetConnectionBacklog(int iConnectionBacklog);

Default Value

5

Remarks

This property contains the maximum number of pending connections maintained by the TCP/IP subsystem. This value reflects the SOMAXCON option for the main listening socket. The default value for most systems is 5. You may set this property to a larger value if the server is expected to receive a large number of connections, and queuing them is desirable.

This property is not available at design time.

Data Type

Integer

SSHConnectionCount Property (SSHDaemon Class)

The number of records in the SSHConnection arrays.

Syntax

int GetSSHConnectionCount();

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at SSHConnectionCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SSHConnectionConnected Property (SSHDaemon Class)

Used to disconnect individual connections and/or show their status.

Syntax

bool GetSSHConnectionConnected(int iConnectionId);
int SetSSHConnectionConnected(int iConnectionId, bool bSSHConnectionConnected);

Default Value

false

Remarks

Used to disconnect individual connections and/or show their status.

The SSHConnectionConnected is used to close connections.

SSHConnectionConnected also shows the status of a particular connection (connected/disconnected).

How and when the connection is closed is controlled by the Linger property. Please refer to its description for more information.

Note:It is recommended to use the Disconnect method instead of setting this property.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the SSHConnectionCount property.

This property is not available at design time.

Data Type

Boolean

SSHConnectionLocalAddress Property (SSHDaemon Class)

This property shows the IP address of the interface through which the connection is passing.

Syntax

QString GetSSHConnectionLocalAddress(int iConnectionId);

Default Value

""

Remarks

This property shows the IP address of the interface through which the connection is passing.

SSHConnectionLocalAddress is important for multihomed hosts where it can be used to find which particular network interface an individual connection is going through.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the SSHConnectionCount property.

This property is read-only and not available at design time.

Data Type

String

SSHConnectionRemoteHost Property (SSHDaemon Class)

The RemoteHost shows the IP address of the remote host through which the connection is coming.

Syntax

QString GetSSHConnectionRemoteHost(int iConnectionId);

Default Value

""

Remarks

The SSHConnectionRemoteHost shows the IP address of the remote host through which the connection is coming.

The connection must be valid or an error will be fired.

If the class is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the SSHConnectionCount property.

This property is read-only and not available at design time.

Data Type

String

SSHConnectionRemotePort Property (SSHDaemon Class)

The RemotePort shows the TCP port on the remote host through which the connection is coming.

Syntax

int GetSSHConnectionRemotePort(int iConnectionId);

Default Value

0

Remarks

The SSHConnectionRemotePort shows the TCP port on the remote host through which the connection is coming.

The connection must be valid or an error will be fired.

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the SSHConnectionCount property.

This property is read-only and not available at design time.

Data Type

Integer

SSHConnectionTimeout Property (SSHDaemon Class)

A timeout for the class.

Syntax

int GetSSHConnectionTimeout(int iConnectionId);
int SetSSHConnectionTimeout(int iConnectionId, int iSSHConnectionTimeout);

Default Value

0

Remarks

A timeout for the class.

If the Timeout property is set to 0, all operations return immediately, potentially failing with an 'WOULDBLOCK' error if data can't be sent or received immediately.

If Timeout is set to a positive value, the class will automatically retry each operation that would otherwise result in a 'WOULDBLOCK' error for a maximum of Timeout seconds.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the class fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 0 (asynchronous operation).

The ConnectionId parameter specifies the index of the item in the array. The size of the array is controlled by the SSHConnectionCount property.

This property is not available at design time.

Data Type

Integer

DefaultAuthMethods Property (SSHDaemon Class)

Specifies the supported authentication methods.

Syntax

QString GetDefaultAuthMethods();
int SetDefaultAuthMethods(QString qsDefaultAuthMethods);

Default Value

"password,publickey"

Remarks

This property specifies the supported authentication methods. The client will choose one of the supported mechanisms when authenticating to the class.

This must be a comma separated list of values. For more information on authenticating clients see the SSHUserAuthRequest event.

The following is a list of methods implemented by the class:

noneThis authentication method is used by most SSH clients to obtain the list of authentication methods available for the user's account. In most cases you should not accept a request using this authentication method.
passwordAuthParam will contain the user-supplied password. If the password is correct, set Accept to true.
publickeyAuthParam will contain an SSH2 public key blob. If the user's public key is acceptable, set Accept to true. The class will then handle verifying the digital signature and will respond to the client accordingly.
keyboard-interactiveSSHUserAuthRequest will fire multiple times for keyboard-interactive authentication: It will fire once for each response sent by the client in the SSH_MSG_USERAUTH_INFO_RESPONSE packet (one for each prompt specified by the daemon). The index of each response will be specified as a suffix in AuthMethod, with AuthParam containing the response to the corresponding prompt (e.g keyboard-interactive-1, keyboard-interactive-2 and so on). Finally, SSHUserAuthRequest will fire one last time with AuthMethod set to "keyboard-interactive" and AuthParam set to an empty string. The daemon must set Accept to true every time to allow the authentication process to succeed.

Data Type

String

DefaultTimeout Property (SSHDaemon Class)

An initial timeout value to be used by incoming connections.

Syntax

int GetDefaultTimeout();
int SetDefaultTimeout(int iDefaultTimeout);

Default Value

60

Remarks

This property is used by the class to set the operational timeout value of all inbound connections once they are established. If the timeout is set to 0, all inbound connections will behave asynchronously. The default value is 60, meaning the class will behave synchronously.

Data Type

Integer

KeyboardInteractiveMessage Property (SSHDaemon Class)

The instructions to send to the client during keyboard-interactive authentication.

Syntax

QString GetKeyboardInteractiveMessage();
int SetKeyboardInteractiveMessage(QString qsKeyboardInteractiveMessage);

Default Value

""

Remarks

This property should be set to the main instructions to send to the client during keyboard-interactive authentication.

Data Type

String

KeyboardInteractivePromptCount Property (SSHDaemon Class)

The number of records in the KeyboardInteractivePrompt arrays.

Syntax

int GetKeyboardInteractivePromptCount();
int SetKeyboardInteractivePromptCount(int iKeyboardInteractivePromptCount);

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KeyboardInteractivePromptCount - 1.

This property is not available at design time.

Data Type

Integer

KeyboardInteractivePromptEcho Property (SSHDaemon Class)

Specifies if the client should echo the value entered by the user or not.

Syntax

bool GetKeyboardInteractivePromptEcho(int iPromptIndex);
int SetKeyboardInteractivePromptEcho(int iPromptIndex, bool bKeyboardInteractivePromptEcho);

Default Value

false

Remarks

Specifies if the client should echo the value entered by the user or not.

The PromptIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyboardInteractivePromptCount property.

This property is not available at design time.

Data Type

Boolean

KeyboardInteractivePromptPrompt Property (SSHDaemon Class)

The prompt label/text the client should present to the user.

Syntax

QString GetKeyboardInteractivePromptPrompt(int iPromptIndex);
int SetKeyboardInteractivePromptPrompt(int iPromptIndex, QString qsKeyboardInteractivePromptPrompt);

Default Value

""

Remarks

The prompt label/text the client should present to the user.

The PromptIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KeyboardInteractivePromptCount property.

This property is not available at design time.

Data Type

String

Listening Property (SSHDaemon Class)

If True, the class accepts incoming connections on LocalPort.

Syntax

bool GetListening();
int SetListening(bool bListening);

Default Value

false

Remarks

Use this property to make the class 'listen' (accept connections) on the port specified by the LocalPort property. Setting this property to False will make the class stop listening (please note that this does not close any existing connections).

Note: It is recommended to use the StartListening or StopListening method instead of setting this property.

This property is not available at design time.

Data Type

Boolean

LocalHost Property (SSHDaemon Class)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

QString GetLocalHost();
int SetLocalHost(QString qsLocalHost);

Default Value

""

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

LocalPort Property (SSHDaemon Class)

The TCP port in the local host where the class listens.

Syntax

int GetLocalPort();
int SetLocalPort(int iLocalPort);

Default Value

22

Remarks

The LocalPort property must be set before IPDaemon starts listening. If its value is 0, then the TCP/IP subsystem picks a port number at random. The port number can be found by checking the value of the LocalPort property after IPDaemon is in listening mode (after successfully assigning True to the Listening property).

The service port is not shared among servers (i.e. there can be only one IPDaemon 'listening' on a particular port at one time).

Data Type

Integer

SSHCertEncoded Property (SSHDaemon Class)

This is the certificate (PEM/base64 encoded).

Syntax

QByteArray GetSSHCertEncoded();
int SetSSHCertEncoded(QByteArray qbaSSHCertEncoded);

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSHCertStore and SSHCertSubject properties also may be used to specify a certificate.

When SSHCertEncoded is set, a search is initiated in the current SSHCertStore for the private key of the certificate. If the key is found, SSHCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSHCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSHCertStore Property (SSHDaemon Class)

This is the name of the certificate store for the client certificate.

Syntax

QByteArray GetSSHCertStore();
int SetSSHCertStore(QByteArray qbaSSHCertStore);

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSHCertStoreType property denotes the type of the certificate store specified by SSHCertStore. If the store is password protected, specify the password in SSHCertStorePassword.

SSHCertStore is used in conjunction with the SSHCertSubject property to specify client certificates. If SSHCertStore has a value, and SSHCertSubject or SSHCertEncoded is set, a search for a certificate is initiated. Please see the SSHCertSubject property for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

Data Type

Byte Array

SSHCertStorePassword Property (SSHDaemon Class)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

QString GetSSHCertStorePassword();
int SetSSHCertStorePassword(QString qsSSHCertStorePassword);

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSHCertStoreType Property (SSHDaemon Class)

This is the type of certificate store for this certificate.

Syntax

int GetSSHCertStoreType();
int SetSSHCertStoreType(int iSSHCertStoreType);

Possible Values

CST_USER(0), 
CST_MACHINE(1),
CST_PFXFILE(2),
CST_PFXBLOB(3),
CST_JKSFILE(4),
CST_JKSBLOB(5),
CST_PEMKEY_FILE(6),
CST_PEMKEY_BLOB(7),
CST_PUBLIC_KEY_FILE(8),
CST_PUBLIC_KEY_BLOB(9),
CST_SSHPUBLIC_KEY_BLOB(10),
CST_P7BFILE(11),
CST_P7BBLOB(12),
CST_SSHPUBLIC_KEY_FILE(13),
CST_PPKFILE(14),
CST_PPKBLOB(15),
CST_XMLFILE(16),
CST_XMLBLOB(17),
CST_JWKFILE(18),
CST_JWKBLOB(19),
CST_SECURITY_KEY(20),
CST_BCFKSFILE(21),
CST_BCFKSBLOB(22),
CST_AUTO(99)

Default Value

0

Remarks

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used the class will automatically determine the type. This property can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: this store type is not available in Java.
1 (cstMachine)For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
2 (cstPFXFile)The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in PFX (PKCS12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: this store type is only available in Java.
5 (cstJKSBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
20 (cstSecurityKey)The certificate is present on a physical security key accessible via a PKCS11 interface.

To use a security key the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstSecurityKey, CertStorePassword to the PIN, and CertStore to the full path of the PKCS11 dll. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the SSHCertStore and set SSHCertStorePassword to the PIN.

Code Example: SSH Authentication with Security Key certmgr.CertStoreType = CertStoreTypes.cstSecurityKey; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstSecurityKey, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: this store type is only available in Java and .NET.
22 (cstBCFKSBlob)The certificate store is a string (binary or base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: this store type is only available in Java and .NET.
99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Data Type

Integer

SSHCertSubject Property (SSHDaemon Class)

This is the subject of the certificate used for client authentication.

Syntax

QString GetSSHCertSubject();
int SetSSHCertSubject(QString qsSSHCertSubject);

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properites are set. When this property is set, a search is performed in the current certificate store certificate with matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.

FieldMeaning
CNCommon Name. This is commonly a host name like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma it must be quoted.

Data Type

String

SSHCompressionAlgorithms Property (SSHDaemon Class)

A comma-separated list containing all allowable compression algorithms.

Syntax

QString GetSSHCompressionAlgorithms();
int SetSSHCompressionAlgorithms(QString qsSSHCompressionAlgorithms);

Default Value

"none,zlib"

Remarks

During the SSH handshake, this list will be used to negotiate the compression algorithm to be used between the client and server. This list is used for both directions: client to server and server to client. When negotiating algorithms, each side sends a list of all algorithms it supports or allows. The algorithm chosen for each direction is the first algorithm to appear in the sender's list that the receiver supports, so it is important to list multiple algorithms in preferential order. If no algorithm can be agreed upon, the class will raise an error and the connection will be aborted.

At least one supported algorithm must appear in this list. The following compression algorithms are supported by the class:

  • zlib
  • zlib@openssh.com
  • none

Data Type

String

SSHEncryptionAlgorithms Property (SSHDaemon Class)

A comma-separated list containing all allowable encryption algorithms.

Syntax

QString GetSSHEncryptionAlgorithms();
int SetSSHEncryptionAlgorithms(QString qsSSHEncryptionAlgorithms);

Default Value

"aes256-ctr,aes192-ctr,aes128-ctr,aes256-cbc,aes192-cbc,aes128-cbc,3des-ctr,3des-cbc,blowfish-cbc,arcfour256,arcfour128,arcfour,cast128-cbc,aes256-gcm@openssh.com,aes128-gcm@openssh.com,chacha20-poly1305@openssh.com"

Remarks

During the SSH handshake, this list will be used to negotiate the encryption algorithm to be used between the client and server. This list is used for both directions: client to server and server to client. When negotiating algorithms, each side sends a list of all algorithms it supports or allows. The algorithm chosen for each direction is the first algorithm to appear in the sender's list that the receiver supports, so it is important to list multiple algorithms in preferential order. If no algorithm can be agreed upon, the class will raise an error and the connection will be aborted.

At least one supported algorithm must appear in this list. The following encryption algorithms are supported by the class:

aes256-ctr256-bit AES encryption in CTR mode
aes256-cbc256-bit AES encryption in CBC mode
aes192-ctr192-bit AES encryption in CTR mode
aes192-cbc192-bit AES encryption in CBC mode
aes128-ctr128-bit AES encryption in CTR mode
aes128-cbc128-bit AES encryption in CBC mode
3des-ctr192-bit (3-key) triple DES encryption in CTR mode
3des-cbc192-bit (3-key) triple DES encryption in CBC mode
cast128-cbcCAST-128 encryption
blowfish-cbcBlowfish encryption
arcfourARC4 encryption
arcfour128128-bit ARC4 encryption
arcfour256256-bit ARC4 encryption
aes256-gcm@openssh.com256-bit AES encryption in GCM mode.
aes128-gcm@openssh.com128-bit AES encryption in GCM mode.
chacha20-poly1305@openssh.comChaCha20 with Poly1305-AES encryption.

Data Type

String

ChangeRecordLength Method (SSHDaemon Class)

Changes the length of received data records.

Syntax

int ChangeRecordLength(int iChannelId, int iRecordLength);

Remarks

This method defines the length of data records to be received (in bytes) for the specified ChannelId.

If RecordLength is set to a positive value, the class will accumulate data until RecordLength bytes of data is received and only then fire the SSHChannelDataIn event with data of length RecordLength. This allows data to be received as records of known length. This method can be called at any time to change the record length, including within the DataIn event.

A value of 0 (default) means this functionality is not used.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

CloseChannel Method (SSHDaemon Class)

Closes a existing SSHChannel .

Syntax

int CloseChannel(int iChannelId);

Remarks

ChannelId is the identifier for the SSH channel to be closed.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Config Method (SSHDaemon Class)

Sets or retrieves a configuration setting.

Syntax

QString Config(const QString& qsConfigurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Error Handling

This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

Disconnect Method (SSHDaemon Class)

Disconnect the specified client.

Syntax

int Disconnect(int iConnectionId);

Remarks

Calling this method will disconnect the client specified by the ConnectionId parameter.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

DoEvents Method (SSHDaemon Class)

Processes events from the internal message queue.

Syntax

int DoEvents();

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

ExchangeKeys Method (SSHDaemon Class)

Causes the class to exchange a new set of session keys on the specified connection.

Syntax

int ExchangeKeys(int iConnectionId);

Remarks

SSH key renegotiation can be initiated by either end of an established SSH connection. ExchangeKeys allows the server to start such a renegotiation with the client. During this process, SSHStatus events will fire containing updates regarding the key negotiation process.

The SSH 2.0 specification recommends that key renegotiation be done once for 2 gigabytes (GB) of data processed by the connection, or once every day. This makes it more difficult to break the security of data-intensive or long-lived connections.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

GetSSHParam Method (SSHDaemon Class)

Used to read a field from an SSH packet's payload.

Syntax

QString GetSSHParam(const QByteArray& qbaPayload, const QString& qsField);

Remarks

This method is used to read the value of a particular field from an SSH packet's payload. Payload should contain the full payload of a packet received by an event such as SSHChannelRequest. Field is the name of a field to be read out of the packet.

The following is a list of the names of well-known channel request field names and their encodings:

ChannelId (int32)The id of the channel that received the packet.
RequestType (string)The type of channel request.
WantsReply (boolean)Whether or not the client wants a reply to the request.

The remaining fields that are available in the payload are dependent upon the value of RequestType.

pty-req

Pty-req is a request to open a pseudo terminal on the specified channel. The following fields are available:

TerminalType (string)The type of terminal being requested (eg: "vt100").
TerminalWidthCharacters (int32)The width, in characters, of the terminal to be opened.
TerminalHeightRows (int32)The height, in rows, of the terminal to be opened.
TerminalWidthPixels (int32)The width, in pixels, of the terminal to be opened.
TerminalHeightPixels (int32)The height, in pixels, of the terminal to be opened.
TerminalModes (string)A list of op-val (int32-byte) encoded modes to be used by the terminal.

x11-req

X11-req is a request to forward x11 sessions over a channel. The following fields are available:

SingleConnection (boolean)Disallows more than one connection to be forwarded by the channel.
X11AuthProtocol (string)The authentication protocol to be used (eg: "MIT-MAGIC-COOKIE-1").
X11AuthCookie (string)A hexadecimal-encoded cookie to be used for authentication.
X11ScreenNumber (int32)The x11 screen number to be used.

env

Env is a request to set an environment variable to be passed into a shell that may be started later. The following fields are available:

VariableName (string)The name of the variable to be set.
VariableValue (string)The value of the variable to be set.

exec

Exec is a request to execute a command on the channel using the authenticated user's shell. The following field is available:

Command (string)The command to be executed.

subsystem

Subsystem is a request to start a subsystem on the specified channel. The following field is available:

Subsystem (string)The name of the subsystem to be started (eg: "sftp").

xon-xoff

Instructs the server to allow or disallow control-S/control-Q style flow control. The following field is available:

ClientCanDo (boolean)Whether or not the server should enable flow control.

signal

Sends a signal to the remote process/service. The following field is available:

SignalName (string)The name of the signal to be sent.

If the packet type is not well known, Field should start with the special character "%" and contain a comma-separated list of field types as defined in SetSSHParam. For example, reading out the X11AuthProtocol of an x11-req payload, you can use "%s,f".

Note: the return value is a string encoded the same way as the FieldValue param in SetSSHParam.

Error Handling

This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

GetSSHParamBytes Method (SSHDaemon Class)

Used to read a field from an SSH packet's payload.

Syntax

QByteArray GetSSHParamBytes(const QByteArray& qbaPayload, const QString& qsField);

Remarks

This method is the same as calling GetSSHParam, but returns raw bytes instead of strings.

Error Handling

This method returns a Binary String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

OpenChannel Method (SSHDaemon Class)

Opens a new SSHChannel .

Syntax

QString OpenChannel(int iConnectionId, const QString& qsChannelType);

Remarks

The SSH 2.0 specification allows for multiple channels to be opened over a single TCP/IP connection. The Channels property represents the channels that are currently open. A new SSHChannel can be opened with OpenChannel.

ChannelType represents the type of SSH channel to be opened. The most common type of channel is "session".

If the call to OpenChannel succeeds, an SSHChannel will be created and added to the Channels collection.

Error Handling

This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

Reset Method (SSHDaemon Class)

Reset the class.

Syntax

int Reset();

Remarks

This method will reset the class's properties to their default values.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

SendBytes Method (SSHDaemon Class)

Sends binary data to the specified channel.

Syntax

int SendBytes(int iChannelId, const QByteArray& qbaData);

Remarks

This method sends binary data to the channel identified by ChannelId. To send text use the SendText method instead.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

SendChannelData Method (SSHDaemon Class)

Used to send data over an SSH channel.

Syntax

int SendChannelData(int iChannelId, const QByteArray& qbaData);

Remarks

This method can be used to send arbitrary data to the channel with the specified ChannelId.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

SendSSHPacket Method (SSHDaemon Class)

Used to send an encoded SSH packet to the server.

Syntax

int SendSSHPacket(int iChannelId, int iPacketType, const QByteArray& qbaPayload);

Remarks

This method can be used to send a previously built SSH payload to the server. ChannelId identifies the channel that will receive the packet.

PacketType identifies what kind of packet is to be sent. Payload should contain the payload of the packet, which can be built by successive calls to SetSSHParam.

When SendSSHPacket is called, the class will finish building the packet, encrypt it for transport, and send it to the server.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

SendText Method (SSHDaemon Class)

Sends text to the specified channel.

Syntax

int SendText(int iChannelId, const QString& qsText);

Remarks

This method sends text to the client identified by ChannelId. To send binary data use the SendBytes method instead.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

SetSSHParam Method (SSHDaemon Class)

Used to write a field to the end of a payload.

Syntax

QByteArray SetSSHParam(const QByteArray& qbaPayload, const QString& qsFieldType, const QString& qsFieldValue);

Remarks

This method is used to build the payload portion of an SSH packet to be sent later by a call to SendSSHPacket. Payload should contain the result of a previous call to SetSSHParam. FieldType is a string defining the type of field to be written to the packet. FieldValue should be the string representation of the field to be written.

The following is a list of supported field types and a description of how FieldValue should be encoded:

sA plaintext string containing the default system encoding of the data.
sbA string containing the hex encoded data. (eg: "A1B23C")
mA variable-length large integer, encoded as a textual representation of the value ("1234").
iA 32-bit integer, encoded as a textual representation of the value (eg: "1234").
lA 64-bit integer, encoded as a textual representation of the value (eg: "1234").
bA single byte, encoded as a textual representation of the value (eg: "123").
fA boolean flag, encoded as a textual representation of the value (eg: 'true' or 'false')

Note: integer values may be encoded in hexadecimal by prefixing "0x" to the beginning of the string, otherwise the value is assumed to be base-10.

Error Handling

This method returns a Binary String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

Shutdown Method (SSHDaemon Class)

Shuts down the server.

Syntax

int Shutdown();

Remarks

This method shuts down the server. Calling this method is equivalent to calling StopListening and then breaking every client connection by calling Disconnect.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

StartListening Method (SSHDaemon Class)

Starts listening for incoming connections.

Syntax

int StartListening();

Remarks

This method begins listening for incoming connections on the port specified by LocalPort. Once listening events will fire as new clients connect and data is transferred.

To stop listening for new connections call StopListening. To stop listening for new connections and disconnect all existing clients call Shutdown.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

StopListening Method (SSHDaemon Class)

Stops listening for new connections.

Syntax

int StopListening();

Remarks

This method stops listening for new connections. After being called any new connection attempts will be rejected. Calling this method does not disconnect existing connections.

To stop listening and disconnect all existing clients call Shutdown instead.

Error Handling

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

Connected Event (SSHDaemon Class)

Fired immediately after a connection completes (or fails).

Syntax

class SSHDaemonConnectedEventParams {
public:
  int ConnectionId();

  int StatusCode();

  const QString &Description();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void Connected(SSHDaemonConnectedEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireConnected(SSHDaemonConnectedEventParams *e) {...}

Remarks

If the connection is made normally, StatusCode is 0, and Description is "OK".

If the connection fails, StatusCode has the error code returned by the system. Description contains a description of this code. The value of StatusCode is equal to the value of the system error.

Please refer to the Error Codes section for more information.

ConnectionRequest Event (SSHDaemon Class)

Fired when a request for connection comes from a remote host.

Syntax

class SSHDaemonConnectionRequestEventParams {
public:
  const QString &Address();

  int Port();

  bool Accept();
  void SetAccept(bool bAccept);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void ConnectionRequest(SSHDaemonConnectionRequestEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireConnectionRequest(SSHDaemonConnectionRequestEventParams *e) {...}

Remarks

This event indicates an incoming connection. The connection is accepted by default. Address and Port will contain information about remote host requesting the inbound connection. If you want to refuse it, you can set the Accept parameter to False.

Disconnected Event (SSHDaemon Class)

Fired when a connection is closed.

Syntax

class SSHDaemonDisconnectedEventParams {
public:
  int ConnectionId();

  int StatusCode();

  const QString &Description();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void Disconnected(SSHDaemonDisconnectedEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireDisconnected(SSHDaemonDisconnectedEventParams *e) {...}

Remarks

If the connection is broken normally, StatusCode is 0, and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the system. Description contains a description of this code. The value of StatusCode is equal to the value of the system error.

Please refer to the Error Codes section for more information.

Error Event (SSHDaemon Class)

Information about errors during data delivery.

Syntax

class SSHDaemonErrorEventParams {
public:
  int ConnectionId();

  int ErrorCode();

  const QString &Description();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void Error(SSHDaemonErrorEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireError(SSHDaemonErrorEventParams *e) {...}

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class fails with an error.

ConnectionId contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Log Event (SSHDaemon Class)

Fires once for each log message.

Syntax

class SSHDaemonLogEventParams {
public:
  int ConnectionId();

  int LogLevel();

  const QString &Message();

  const QString &LogType();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void Log(SSHDaemonLogEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireLog(SSHDaemonLogEventParams *e) {...}

Remarks

This event fires once for each log messages generated by the class. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the detail level of the message. Possible values are:

0 (None) No messages are logged.
1 (Info - Default) Informational events such as SSH handshake messages are logged.
2 (Verbose) Detailed data such as individual packet information is logged.
3 (Debug) Debug data including all relevant sent and received bytes are logged.

Message is the log message.

LogType is reserved for future use.

ConnectionId specifies the connection to which the log message is applicable.

SSHChannelClosed Event (SSHDaemon Class)

Fired when a channel is closed.

Syntax

class SSHDaemonSSHChannelClosedEventParams {
public:
  int ConnectionId();

  int ChannelId();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void SSHChannelClosed(SSHDaemonSSHChannelClosedEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireSSHChannelClosed(SSHDaemonSSHChannelClosedEventParams *e) {...}

Remarks

The SSHChannelClosed event is fired when a channel is closed on an SSH connection.

ConnectionId identifies the connection. ChannelId identifies the channel.

Note: Processing long-running requests, including sending channel data, inside this event may cause the underlying transport to stop processing SSH data until the event returns. In order to prevent this from happening, all requests should be processed asynchronously in a separate thread outside of this event.

SSHChannelDataIn Event (SSHDaemon Class)

Fired when data is received on an SSH channel.

Syntax

class SSHDaemonSSHChannelDataInEventParams {
public:
  int ConnectionId();

  int ChannelId();

  const QByteArray &Data();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void SSHChannelDataIn(SSHDaemonSSHChannelDataInEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireSSHChannelDataIn(SSHDaemonSSHChannelDataInEventParams *e) {...}

Remarks

Whenever a client sends data to an SSH channel, the SSHChannelDataIn event will fire. ChannelId will identify the channel receiving data. Data will contain the raw data being received.

ConnectionId identifies the connection. ChannelId identifies the channel.

Note: Processing long-running requests, including sending channel data, inside this event may cause the underlying transport to stop processing SSH data until the event returns. In order to prevent this from happening, all requests should be processed asynchronously in a separate thread outside of this event.

SSHChannelEOF Event (SSHDaemon Class)

Fired when the remote peer signals the end of the data stream for the channel.

Syntax

class SSHDaemonSSHChannelEOFEventParams {
public:
  int ConnectionId();

  int ChannelId();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void SSHChannelEOF(SSHDaemonSSHChannelEOFEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireSSHChannelEOF(SSHDaemonSSHChannelEOFEventParams *e) {...}

Remarks

The SSHChannelEOF event is fired when the end of the data stream for a channel on an SSH connection is reached.

ConnectionId identifies the connection. ChannelId identifies the channel.

Note: Processing long-running requests, including sending channel data, inside this event may cause the underlying transport to stop processing SSH data until the event returns. In order to prevent this from happening, all requests should be processed asynchronously in a separate thread outside of this event.

SSHChannelOpened Event (SSHDaemon Class)

Fired when a channel is successfully opened.

Syntax

class SSHDaemonSSHChannelOpenedEventParams {
public:
  int ConnectionId();

  int ChannelId();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void SSHChannelOpened(SSHDaemonSSHChannelOpenedEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireSSHChannelOpened(SSHDaemonSSHChannelOpenedEventParams *e) {...}

Remarks

The SSHChannelOpened event is fired when a channel is successfully opened on an SSH connection.

ConnectionId identifies the connection. ChannelId identifies the channel.

Note: Processing long-running requests, including sending channel data, inside this event may cause the underlying transport to stop processing SSH data until the event returns. In order to prevent this from happening, all requests should be processed asynchronously in a separate thread outside of this event.

SSHChannelOpenRequest Event (SSHDaemon Class)

Fired when a client attempts to open a new channel.

Syntax

class SSHDaemonSSHChannelOpenRequestEventParams {
public:
  int ConnectionId();

  int ChannelId();

  const QString &Service();

  const QByteArray &Parameters();

  bool Accept();
  void SetAccept(bool bAccept);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void SSHChannelOpenRequest(SSHDaemonSSHChannelOpenRequestEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireSSHChannelOpenRequest(SSHDaemonSSHChannelOpenRequestEventParams *e) {...}

Remarks

This event is fired whenever a client attempts to open a new channel for a given connection. ChannelId will contain the id of the channel to be created. Service will identify the type of channel that is being requested (e.g.: "session"). Set Accept to true to accept the channel open request.

ConnectionId identifies the connection. ChannelId identifies the channel.

If the channel open request contains extra information, it will be contained in Parameters; you can extract data from it using GetSSHParam and GetSSHParamBytes. The most common example of a request with parameters would be a request with Service set to "direct-tcpip" (for SSH tunneling); in that case Parameters will contain the host to connect (string), the port to connect (int), the originator IP address (string) and the originator TCP port (int).

Note: Processing long-running requests, including sending channel data, inside this event may cause the underlying transport to stop processing SSH data until the event returns. In order to prevent this from happening, all requests should be processed asynchronously in a separate thread outside of this event.

SSHChannelReadyToSend Event (SSHDaemon Class)

Fired when the class is ready to send data.

Syntax

class SSHDaemonSSHChannelReadyToSendEventParams {
public:
  int ConnectionId();

  int ChannelId();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void SSHChannelReadyToSend(SSHDaemonSSHChannelReadyToSendEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireSSHChannelReadyToSend(SSHDaemonSSHChannelReadyToSendEventParams *e) {...}

Remarks

This event fires when data can be sent over the SSH Channel specified by ChannelId for the connection specified by ConnectionId.

When a channel is opened this event will fire once the channel is ready and data can be sent.

When Timeout is set to 0 (asynchronous) sending data may result in an error if the channel or underlying socket cannot accept more data to send. Monitor SSHChannelReadyToSend or ReadyToSend to determine when data can be sent again.

When Timeout is set to a positive value the class will block when sending data until the data can be successfully sent and SSHChannelReadyToSend and ReadyToSend do not need to be monitored.

SSHChannelRequest Event (SSHDaemon Class)

Fired when the SSHHost sends a channel request to the client.

Syntax

class SSHDaemonSSHChannelRequestEventParams {
public:
  int ConnectionId();

  int ChannelId();

  const QString &RequestType();

  const QByteArray &Packet();

  bool Success();
  void SetSuccess(bool bSuccess);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void SSHChannelRequest(SSHDaemonSSHChannelRequestEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireSSHChannelRequest(SSHDaemonSSHChannelRequestEventParams *e) {...}

Remarks

The SSHHost may send requests that affect the status of a particular SSHChannel. Some requests will be automatically handled by the class. However, others may need the attention of the user to be dealt with properly within the scope of the application.

ConnectionId identifies the connection.

ChannelId identifies the channel receiving the request.

Type will contain the type of the request. These types are dependent upon the type of the channel. For example, a "session" channel executing a command on the remote shell may receive an "exit-status" request containing the return code of that command.

RequestData contains the remainder of the original SSH packet. If the request type has specific parameters, they can be parsed out of this data.

Success should be used to instruct the class to respond to the request with either a success or failure notification. If the request is successful, SSHChannelRequested will fire with the same information in case the request requires further processing.

Note: Processing long-running requests, including sending channel data, inside this event may cause the underlying transport to stop processing SSH data until the event returns. In order to prevent this from happening, all requests should be processed asynchronously in a separate thread outside of this event.

SSHChannelRequested Event (SSHDaemon Class)

Fired if the SSHChannelRequest was successful, any further processing for the channel request should be done here.

Syntax

class SSHDaemonSSHChannelRequestedEventParams {
public:
  int ConnectionId();

  int ChannelId();

  const QString &RequestType();

  const QByteArray &Packet();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void SSHChannelRequested(SSHDaemonSSHChannelRequestedEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireSSHChannelRequested(SSHDaemonSSHChannelRequestedEventParams *e) {...}

Remarks

The SSHHost may send requests that affect the status of a particular SSHChannel. Some requests will be automatically handled by the class. However, others may need the attention of the user to be dealt with properly within the scope of the application.

ConnectionId identifies the connection.

ChannelId identifies the channel receiving the request.

Type will contain the type of the request. These types are dependent upon the type of the channel. For example, a "session" channel executing a command on the remote shell may receive an "exit-status" request containing the return code of that command.

RequestData contains the remainder of the original SSH packet. If the request type has specific parameters, they can be parsed out of this data.

Note: Processing long-running requests, including sending channel data, inside this event may cause the underlying transport to stop processing SSH data until the event returns. In order to prevent this from happening, all requests should be processed asynchronously in a separate thread outside of this event.

SSHServiceRequest Event (SSHDaemon Class)

Fired when a client requests a service to be started.

Syntax

class SSHDaemonSSHServiceRequestEventParams {
public:
  int ConnectionId();

  const QString &Service();

  bool Accept();
  void SetAccept(bool bAccept);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void SSHServiceRequest(SSHDaemonSSHServiceRequestEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireSSHServiceRequest(SSHDaemonSSHServiceRequestEventParams *e) {...}

Remarks

The SSHServiceRequest event is fired when a client requests that a service be started for a particular connection, identified by ConnectionId. Service will be the name of the service the client wishes to start. If the connection is authenticated and the user has access to the service, set Accept to true to allow the SSHDaemon to accept the request.

Note: Processing long-running requests, including sending channel data, inside this event may cause the underlying transport to stop processing SSH data until the event returns. In order to prevent this from happening, all requests should be processed asynchronously in a separate thread outside of this event.

SSHStatus Event (SSHDaemon Class)

Shows the progress of the secure connection.

Syntax

class SSHDaemonSSHStatusEventParams {
public:
  int ConnectionId();

  const QString &Message();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void SSHStatus(SSHDaemonSSHStatusEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireSSHStatus(SSHDaemonSSHStatusEventParams *e) {...}

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

SSHUserAuthRequest Event (SSHDaemon Class)

Fires when a client attempts to authenticate a connection.

Syntax

class SSHDaemonSSHUserAuthRequestEventParams {
public:
  int ConnectionId();

  const QString &User();

  const QString &Service();

  const QString &AuthMethod();

  const QString &AuthParam();

  bool Accept();
  void SetAccept(bool bAccept);

  bool PartialSuccess();
  void SetPartialSuccess(bool bPartialSuccess);

  const QString &AvailableMethods();
  void SetAvailableMethods(const QString &qsAvailableMethods);

  const QString &KeyAlgorithm();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};
// To handle, connect one or more slots to this signal. void SSHUserAuthRequest(SSHDaemonSSHUserAuthRequestEventParams *e);
// Or, subclass SSHDaemon and override this emitter function. virtual int FireSSHUserAuthRequest(SSHDaemonSSHUserAuthRequestEventParams *e) {...}

Remarks

The SSHUserAuthRequest event fires when an SSH client attempts to authenticate itself on a particular connection. ConnectionId will identify the connection being authenticated. User will be the name of the account requesting authentication, and Service will contain the name of the service the client is wishing to access.

AuthMethod will denote which method the client is attempting to use to authenticate itself. AuthParam will contain the value of the authentication token used by the client. If the token is acceptable, you may set Accept to true to allow the class to authenticate the client. If it is not, set Accept to false.

Connecting clients will initially attempt authentication with an AuthMethod of "none". This is done with the expectation that the request will fail and the server will send a list of supported methods back to the client. In your implementation check the AuthMethod parameter, if it is "none" you should set AvailableMethods and reject the request. The client will select one of the available methods and re-authenticate.

You may set AvailableMethods to a comma-delimited string of authentication methods that are available for the user. This list will be sent back to the client so that it may perform further authentication attempts.

The following is a list of methods implemented by the class:

noneThis authentication method is used by most SSH clients to obtain the list of authentication methods available for the user's account. In most cases you should not accept a request using this authentication method.
passwordAuthParam will contain the user-supplied password. If the password is correct, set Accept to true.
publickeyAuthParam will contain an SSH2 public key blob. If the user's public key is acceptable, set Accept to true. The class will then handle verifying the digital signature and will respond to the client accordingly.
keyboard-interactiveSSHUserAuthRequest will fire multiple times for keyboard-interactive authentication: It will fire once for each response sent by the client in the SSH_MSG_USERAUTH_INFO_RESPONSE packet (one for each prompt specified by the daemon). The index of each response will be specified as a suffix in AuthMethod, with AuthParam containing the response to the corresponding prompt (e.g keyboard-interactive-1, keyboard-interactive-2 and so on). Finally, SSHUserAuthRequest will fire one last time with AuthMethod set to "keyboard-interactive" and AuthParam set to an empty string. The daemon must set Accept to true every time to allow the authentication process to succeed.

The PartialSuccess parameter is only used when multi-factor authentication is needed. To implement multi-factor authentication when this event fires first verify the AuthParam for the given AuthMethod. If accepted, set PartialSuccess to true and Accept to false. The client should then send the authentication request for a different form of authentication specified in AvailableMethods. You may continue to set PartialSuccess to true until all authentication requirements are satisfied. Once all requirements are satisfied set Accept to true.

KeyAlgorithm hold the signing algorithm used when the client attempts public key authentication. Possible values are:

  • ssh-rsa
  • rsa-sha2-256
  • rsa-sha2-512
  • ssh-dss
  • ecdsa-sha2-nistp256
  • ecdsa-sha2-nistp384
  • ecdsa-sha2-nistp521
  • x509v3-sign-rsa
  • x509v3-sign-dss

Note: Processing long-running requests, including sending channel data, inside this event may cause the underlying transport to stop processing SSH data until the event returns. In order to prevent this from happening, all requests should be processed asynchronously in a separate thread outside of this event.

Configuration Settings (SSHDaemon Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

SSHDaemon Configuration Settings

AltSSHCertCount:   The number of records in the AltSSHCert configuration settings.

This configuration setting controls the size of the following arrays:

The array indices start at 0 and end at AltSSHCertCount - 1.

The AltSSHCert configuration settings are used to specify alternative digital certificates to the one set using the SSHCert. The server will determine the certificate to use during SSH negotiation based on the public key algorithm requested by the connecting client. A certificate with a private key is required for session authentication and encryption.

These are the server's certificates, and must be set prior to setting Listening to True.

AltSSHCertStore[i]:   The name of the certificate store.

The name of the certificate store. This is used when specifying an alternative SSHCert.

The AltSSHCertStoreType specifies the type of the certificate store specified by AltSSHCertStore. IF the store is password protected, specify the password in the AltSSHCertStorePassword.

AltSSHCertStore is used in conjunction with the AltSSHCertSubject field in order to specify the certificate.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

AltSSHCertStorePassword[i]:   The password used to open the certificate store.

If the certificate store is of a type that requires a password, this setting can be used to specify that password. This is used when specifying an alternative SSHCert

AltSSHCertStoreType[i]:   The type of certificate store.

This specifies the type of certificate store. This is used when specifying an alternate SSHCert. Possible values are:

0 User - default For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: this store type is not available in Java.
1 Machine - For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java.
2 PFXFile - The certificate store is the name of a PFX (PKCS12) file containing certificates.
3 PFXBlob - The certificate store is a string (binary or base64-encoded) representing a certificate store in PFX (PKCS12) format.
4 JKSFile - The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: this store type is only available in Java.
5 JKSBlob - The certificate store is a string (binary or base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 PEMKeyFile - The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 PEMKeyBlob - The certificate store is a string (binary or base64-encoded) that contains a private key and an optional certificate.
14 PPKFile - The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 PPKBlob - The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 XMLFile - The certificate store is the name of a file that contains a certificate in XML format.
17 XMLBlob - The certificate store is a string that contains a certificate in XML format.

AltSSHCertSubject[i]:   The alternative certificate subject.

The subject of the certificate. This is used when specifying an alternative SSHCert.

DefaultIdleTimeout:   Specifies the default idle timeout for inactive clients.

This property specifies the idle timeout (in seconds) for clients. When set to a positive value the class will disconnect idle clients after the specified timeout.

If set to 0 (default) no idle timeout is applied.

KeyboardInteractivePrompts[ConnectionId]:   Specifies custom keyboard-interactive prompts for particular connections.

By default, setting the KeyboardInteractivePrompts property will cause those prompts to be used for every user attempting to connect. This setting can be used to override the KeyboardInteractivePrompts property and provide unique prompts for certain connections.

This setting takes a list of prompts to display to the client, and each prompt includes an 'echo' parameter to specify whether or not to echo the client's response to the prompt. The prompt itself and the echo parameter should be separated by a comma (","), and each prompt should be separated by a semi-colon (";"). For example:

"KeyboardInteractivePrompts[connId]=First prompt,echo=false;Second prompt,echo=true"

This config can be set anywhere in code, but it is necessary to know the ConnectionId for the specific connection beforehand; as such, it is generally recommended to set this config inside the SSHUserAuthRequest event. Since connecting clients initially attempt to connect with and AuthMethod of 'none' (with the understanding that this attempt will fail, and the SSH server will advertise which authentication methods it supports), It is recommended to check the AuthMethod, User, and ConnectionId parameters of the SSHUserAuthRequest event and set this config accordingly.

When SSHDaemon displays keyboard-interactive prompts, it will first check to see if this config is populated for the current ConnectionId. If it is, the prompts set here will be used instead of those set in the KeyboardInteractivePrompts property. Otherwise, the KeyboardInteractivePrompts property will function as normal.

KeyRenegotiationThreshold:   Sets the threshold for the SSH Key Renegotiation.

This property allows you to specify the threshold, in the number of bytes, for the SSH Key Renegotiation. The default value for this property is set to 1 GB.

Example (for setting the threshold to 500 MB): SSHComponent.Config("KeyRenegotiationThreshold=524288000")

LogLevel:   Specifies the level of detail that is logged.

This setting controls the level of detail that is logged through the Log event. Possible values are:

0 (None) No messages are logged.
1 (Info - Default) Informational events such as SSH handshake messages are logged.
2 (Verbose) Detailed data such as individual packet information is logged.
3 (Debug) Debug data including all relevant sent and received bytes are logged.

MaxAuthAttempts:   The maximum authentication attempts allowed before forcing a disconnect.

This setting specifies the maximum amount of authentication attempts that will be allowed before forcibly disconnecting the client.

ServerSSHVersionString:   The SSH version string sent to connecting clients.

This setting specifies the version string value that is sent to all connecting clients. This may be set to specify server specific information. The default value is "SSH-2.0-IPWorks SSH Daemon 2016". When setting your own value it must begin with "SSH-2.0-" as this is a standard format that specifies the supported SSH version.

SSHKeepAliveCountMax:   The maximum number of keep alive packets to send without a response.

This setting specifies the maximum number of keep alive packets to send when no response is received. Normally a response to a keep alive packet is received right away. If no response is received the class will continue to send keep alive packets until SSHKeepAliveCountMax is reached. If this is reached the class will assume the connection is broken and disconnect. The default value is 5.

SSHKeepAliveInterval:   The interval between keep alive packets.

This setting specifies the number of seconds between keep alive packets. If set to a positive value the class will send a SSH keep alive packet after KeepAliveInterval seconds of inactivity. This setting only takes effect when there is no activity, if any data is sent or received over the connection it will reset the timer.

The default value is 0 meaning no keep alives will be sent.

Note: The SSHReverseTunnel class uses a default value of 30.

SSHKeyExchangeAlgorithms:   Specifies the supported key exchange algorithms.

This may be used to specify the list of supported Key Exchange algorithms used during SSH negotiation. The value should contain a comma separated list of algorithms. Supported algorithms are:

  • curve25519-sha256
  • curve25519-sha256@libssh.org
  • diffie-hellman-group1-sha1
  • diffie-hellman-group14-sha1
  • diffie-hellman-group14-sha256
  • diffie-hellman-group16-sha512
  • diffie-hellman-group18-sha512
  • diffie-hellman-group-exchange-sha256
  • diffie-hellman-group-exchange-sha1
  • ecdh-sha2-nistp256
  • ecdh-sha2-nistp384
  • ecdh-sha2-nistp521
The default value is: curve25519-sha256,curve25519-sha256@libssh.org,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1,diffie-hellman-group14-sha256,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,ecdh-sha2-nistp256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,ecdh-sha2-nistp384,ecdh-sha2-nistp521.
SSHMacAlgorithms:   Specifies the supported Mac algorithms.

This may be used to specify an alternate list of supported Mac algorithms used during SSH negotiation. This also specifies the order in which the Mac algorithms are preferred. The value should contain a comma separated list of algorithms. Supported algorithms are:

  • hmac-sha1
  • hmac-md5
  • hmac-sha1-96
  • hmac-md5-96
  • hmac-sha2-256
  • hmac-sha2-256-96
  • hmac-sha2-512
  • hmac-sha2-512-96
  • hmac-ripemd160
  • hmac-ripemd160-96
  • hmac-sha2-256-etm@openssh.com
  • hmac-sha2-512-etm@openssh.com
The default value is hmac-sha2-256,hmac-sha2-512,hmac-sha1,hmac-md5,hmac-ripemd160,hmac-sha1-96,hmac-md5-96,hmac-sha2-256-96,hmac-sha2-512-96,hmac-ripemd160-96,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com.
SSHPublicKeyAlgorithms:   Specifies the supported public key algorithms.

This setting specifies the allowed public key algorithms. This list controls only the public key algorithm used when authenticating to the server. This list has no bearing on the public key algorithms that can be used to authenticate the client. The default value is ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,rsa-sha2-256,rsa-sha2-512,ssh-rsa,ssh-dss,x509v3-sign-rsa,x509v3-sign-dss.

SSHVersionPattern:   The pattern used to match the remote host's version string.

This configuration setting specifies the pattern used to accept or deny the remote host's SSH version string. It takes a comma-delimited list of patterns to match. The default value is "*SSH-1.99-*,*SSH-2.0-*" and will accept connections from SSH 1.99 and 2.0 hosts. As an example, the below value would accept connections for SSH 1.99, 2.0, and 2.99 hosts.

*SSH-1.99-*,*SSH-2.0-*,*SSH-2.99-*
UserAuthBanner[ConnectionId]:   A custom user authentication banner.

This setting specifies a custom user authentication banner, which may be sent to give the client more information regarding an authentication attempt. "connectionId" specifies the particular connection to send the message to. This configuration option is only effective when set within the SSHUserAuthRequest event.

IPDaemon Configuration Settings

AllowedClients:   A comma-separated list of host names or IP addresses that can access the class.

This setting defines a comma-separated list of host names or IPv4 addresses that may access the class. The wildcard character "*" is supported. The default value is "*" and all connections are accepted.

When a client connects, the client's address is checked against the list defined here. If there is no match, the ConnectionRequest event fires with an Accept value set to False. If no action is taken within the ConnectionRequest event, the client will be disconnected.

BindExclusively:   Whether or not the component considers a local port reserved for exclusive use.

If this is true (default), the component will bind to the local port with the ExclusiveAddressUse option set, meaning that nothing else can bind to the same port. Also the component will not be able to bind to local ports that are already in use by some other instance and attempts to do so will result in failure.

DefaultConnectionTimeout:   The inactivity timeout applied to the SSL handshake.

This setting specifies the inactivity (in seconds) to apply to incoming SSL connections. When set to a positive value if the other end is unresponsive for the specified number of seconds the connection will timeout. This is not applicable to the entire handshake, only the inactivity of the connecting client during the handshake if a response is expected and none is received within the timeout window. The default value is 0 and no connection specific timeout is applied.

Note: This is only applicable to incoming SSL connections. This should only be set if there is a specific reason to do so.

InBufferSize:   The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

InBufferSize is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

KeepAliveInterval:   The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgement is received from the remote host the keep-alive packet will be re-sent. This setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second. This setting is applicable to all connections.

Note: This value is not applicable in macOS.

KeepAliveTime:   The inactivity time in milliseconds before a TCP keep-alive packet is sent.

By default the operating system will determine the time a connection is idle before a TCP keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases a shorter interval is more useful. Set this value to the desired interval in milliseconds. This setting is applicable to all connections.

MaxConnections:   The maximum number of connections available.

The maximum number of connections available. This property must be set before Listening is set to True, and once set, it can no longer be changed for the current instance of the class. The maximum value for this setting is 100,000 connections. Use this setting with caution. Extremely large values may impact performance. The default value is 1000.

Note: Unix/Linux operating systems limit the number of simultaneous connections to 1024.

OutBufferSize:   The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize is shared among incoming connections. When the property is set, the corresponding value is set for incoming connections as they are accepted. Existing connections are not modified.

TcpNoDelay:   Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseIPv6:   Whether to use IPv6.

When set to 0 (default), the class will use IPv4 exclusively. When set to 1, the class will use IPv6 exclusively. When set to 2, the class will listen for both IPv4 and IPv6 connections. If IPv6 is not available on the system, only IPv4 will be used. The default value is 0. Possible values are:

0 IPv4 Only
1 IPv6 Only
2 IPv6 and IPv4

Base Configuration Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage:   The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

IdentifierName
037IBM EBCDIC - U.S./Canada
437OEM - United States
500IBM EBCDIC - International
708Arabic - ASMO 708
709Arabic - ASMO 449+, BCON V4
710Arabic - Transparent Arabic
720Arabic - Transparent ASMO
737OEM - Greek (formerly 437G)
775OEM - Baltic
850OEM - Multilingual Latin I
852OEM - Latin II
855OEM - Cyrillic (primarily Russian)
857OEM - Turkish
858OEM - Multilingual Latin I + Euro symbol
860OEM - Portuguese
861OEM - Icelandic
862OEM - Hebrew
863OEM - Canadian-French
864OEM - Arabic
865OEM - Nordic
866OEM - Russian
869OEM - Modern Greek
870IBM EBCDIC - Multilingual/ROECE (Latin-2)
874ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875IBM EBCDIC - Modern Greek
932ANSI/OEM - Japanese, Shift-JIS
936ANSI/OEM - Simplified Chinese (PRC, Singapore)
949ANSI/OEM - Korean (Unified Hangul Code)
950ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026IBM EBCDIC - Turkish (Latin-5)
1047IBM EBCDIC - Latin 1/Open System
1140IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141IBM EBCDIC - Germany (20273 + Euro symbol)
1142IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144IBM EBCDIC - Italy (20280 + Euro symbol)
1145IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147IBM EBCDIC - France (20297 + Euro symbol)
1148IBM EBCDIC - International (500 + Euro symbol)
1149IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201Unicode UCS-2 Big-Endian
1250ANSI - Central European
1251ANSI - Cyrillic
1252ANSI - Latin I
1253ANSI - Greek
1254ANSI - Turkish
1255ANSI - Hebrew
1256ANSI - Arabic
1257ANSI - Baltic
1258ANSI/OEM - Vietnamese
1361Korean (Johab)
10000MAC - Roman
10001MAC - Japanese
10002MAC - Traditional Chinese (Big5)
10003MAC - Korean
10004MAC - Arabic
10005MAC - Hebrew
10006MAC - Greek I
10007MAC - Cyrillic
10008MAC - Simplified Chinese (GB 2312)
10010MAC - Romania
10017MAC - Ukraine
10021MAC - Thai
10029MAC - Latin II
10079MAC - Icelandic
10081MAC - Turkish
10082MAC - Croatia
12000Unicode UCS-4 Little-Endian
12001Unicode UCS-4 Big-Endian
20000CNS - Taiwan
20001TCA - Taiwan
20002Eten - Taiwan
20003IBM5550 - Taiwan
20004TeleText - Taiwan
20005Wang - Taiwan
20105IA5 IRV International Alphabet No. 5 (7-bit)
20106IA5 German (7-bit)
20107IA5 Swedish (7-bit)
20108IA5 Norwegian (7-bit)
20127US-ASCII (7-bit)
20261T.61
20269ISO 6937 Non-Spacing Accent
20273IBM EBCDIC - Germany
20277IBM EBCDIC - Denmark/Norway
20278IBM EBCDIC - Finland/Sweden
20280IBM EBCDIC - Italy
20284IBM EBCDIC - Latin America/Spain
20285IBM EBCDIC - United Kingdom
20290IBM EBCDIC - Japanese Katakana Extended
20297IBM EBCDIC - France
20420IBM EBCDIC - Arabic
20423IBM EBCDIC - Greek
20424IBM EBCDIC - Hebrew
20833IBM EBCDIC - Korean Extended
20838IBM EBCDIC - Thai
20866Russian - KOI8-R
20871IBM EBCDIC - Icelandic
20880IBM EBCDIC - Cyrillic (Russian)
20905IBM EBCDIC - Turkish
20924IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932JIS X 0208-1990 & 0121-1990
20936Simplified Chinese (GB2312)
21025IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027Extended Alpha Lowercase
21866Ukrainian (KOI8-U)
28591ISO 8859-1 Latin I
28592ISO 8859-2 Central Europe
28593ISO 8859-3 Latin 3
28594ISO 8859-4 Baltic
28595ISO 8859-5 Cyrillic
28596ISO 8859-6 Arabic
28597ISO 8859-7 Greek
28598ISO 8859-8 Hebrew
28599ISO 8859-9 Latin 5
28605ISO 8859-15 Latin 9
29001Europa 3
38598ISO 8859-8 Hebrew
50220ISO 2022 Japanese with no halfwidth Katakana
50221ISO 2022 Japanese with halfwidth Katakana
50222ISO 2022 Japanese JIS X 0201-1989
50225ISO 2022 Korean
50227ISO 2022 Simplified Chinese
50229ISO 2022 Traditional Chinese
50930Japanese (Katakana) Extended
50931US/Canada and Japanese
50933Korean Extended and Korean
50935Simplified Chinese Extended and Simplified Chinese
50936Simplified Chinese
50937US/Canada and Traditional Chinese
50939Japanese (Latin) Extended and Japanese
51932EUC - Japanese
51936EUC - Simplified Chinese
51949EUC - Korean
51950EUC - Traditional Chinese
52936HZ-GB2312 Simplified Chinese
54936Windows XP: GB18030 Simplified Chinese (4 Byte)
57002ISCII Devanagari
57003ISCII Bengali
57004ISCII Tamil
57005ISCII Telugu
57006ISCII Assamese
57007ISCII Oriya
57008ISCII Kannada
57009ISCII Malayalam
57010ISCII Gujarati
57011ISCII Punjabi
65000Unicode UTF-7
65001Unicode UTF-8

The following is a list of valid code page identifiers for Mac OS only:

IdentifierName
1ASCII
2NEXTSTEP
3JapaneseEUC
4UTF8
5ISOLatin1
6Symbol
7NonLossyASCII
8ShiftJIS
9ISOLatin2
10Unicode
11WindowsCP1251
12WindowsCP1252
13WindowsCP1253
14WindowsCP1254
15WindowsCP1250
21ISO2022JP
30MacOSRoman
10UTF16String
0x90000100UTF16BigEndian
0x94000100UTF16LittleEndian
0x8c000100UTF32String
0x98000100UTF32BigEndian
0x9c000100UTF32LittleEndian
65536Proprietary

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
UseInternalSecurityAPI:   Tells the class whether or not to use the system security libraries or an internal implementation.

By default the class will use the system security libraries to perform cryptographic functions. Setting this to True tells the class to use the internal implementation instead of using the system's security API.

Trappable Errors (SSHDaemon Class)

SSHDaemon Errors

1201   Could not forward connection. A detailed message follows.
1202   Could not forward connection/channel data. A detailed message follows.
1300   Could not authenticate client.
1301   No server certificate was specified or no private key found.

IPDaemon Errors

100   You cannot change the RemotePort at this time. A connection is in progress.
101   You cannot change the RemoteHost at this time. A connection is in progress.
102   The RemoteHost address is invalid (0.0.0.0).
104   IPDaemon is already listening.
106   Cannot change LocalPort when IPDaemon is Listening.
107   Cannot change LocalHost when IPDaemon is Listening.
108   Cannot change MaxConnections when IPDaemon is Listening.
112   You cannot change MaxLineLength at this time. A connection is in progress.
116   RemotePort cannot be zero. Please specify a valid service port number.
126   Invalid ConnectionId.
135   Operation would block.

TCP/IP Errors

10004   [10004] Interrupted system call.
10009   [10009] Bad file number.
10013   [10013] Access denied.
10014   [10014] Bad address.
10022   [10022] Invalid argument.
10024   [10024] Too many open files.
10035   [10035] Operation would block.
10036   [10036] Operation now in progress.
10037   [10037] Operation already in progress.
10038   [10038] Socket operation on non-socket.
10039   [10039] Destination address required.
10040   [10040] Message too long.
10041   [10041] Protocol wrong type for socket.
10042   [10042] Bad protocol option.
10043   [10043] Protocol not supported.
10044   [10044] Socket type not supported.
10045   [10045] Operation not supported on socket.
10046   [10046] Protocol family not supported.
10047   [10047] Address family not supported by protocol family.
10048   [10048] Address already in use.
10049   [10049] Can't assign requested address.
10050   [10050] Network is down.
10051   [10051] Network is unreachable.
10052   [10052] Net dropped connection or reset.
10053   [10053] Software caused connection abort.
10054   [10054] Connection reset by peer.
10055   [10055] No buffer space available.
10056   [10056] Socket is already connected.
10057   [10057] Socket is not connected.
10058   [10058] Can't send after socket shutdown.
10059   [10059] Too many references, can't splice.
10060   [10060] Connection timed out.
10061   [10061] Connection refused.
10062   [10062] Too many levels of symbolic links.
10063   [10063] File name too long.
10064   [10064] Host is down.
10065   [10065] No route to host.
10066   [10066] Directory not empty
10067   [10067] Too many processes.
10068   [10068] Too many users.
10069   [10069] Disc Quota Exceeded.
10070   [10070] Stale NFS file handle.
10071   [10071] Too many levels of remote in path.
10091   [10091] Network subsystem is unavailable.
10092   [10092] WINSOCK DLL Version out of range.
10093   [10093] Winsock not loaded yet.
11001   [11001] Host not found.
11002   [11002] Non-authoritative 'Host not found' (try again or check DNS setup).
11003   [11003] Non-recoverable errors: FORMERR, REFUSED, NOTIMP.
11004   [11004] Valid name, no data record (check DNS setup).

Copyright (c) 2022 /n software inc. - All rights reserved.
IPWorks SSH 2022 Qt Edition - Version 22.0 [Build 8172]