SMIME Class

Properties   Methods   Events   Config Settings   Errors  

The S/MIME class implements the S/MIME standard for encryption and decryption with public key cryptography and X.509 digital certificates.

Class Name

IPWorksSMIME_SMIME

Procedural Interface

 ipworkssmime_smime_open();
 ipworkssmime_smime_close($res);
 ipworkssmime_smime_register_callback($res, $id, $function);
 ipworkssmime_smime_get_last_error($res);
 ipworkssmime_smime_get_last_error_code($res);
 ipworkssmime_smime_set($res, $id, $index, $value);
 ipworkssmime_smime_get($res, $id, $index);
 ipworkssmime_smime_do_addrecipientcert($res, $certencoded);
 ipworkssmime_smime_do_checkmessageencrypted($res);
 ipworkssmime_smime_do_checkmessagesigned($res);
 ipworkssmime_smime_do_config($res, $configurationstring);
 ipworkssmime_smime_do_decrypt($res);
 ipworkssmime_smime_do_decryptandverifysignature($res);
 ipworkssmime_smime_do_encrypt($res);
 ipworkssmime_smime_do_getrecipientinfo($res);
 ipworkssmime_smime_do_getsignercertinfo($res);
 ipworkssmime_smime_do_reset($res);
 ipworkssmime_smime_do_sign($res);
 ipworkssmime_smime_do_signandencrypt($res);
 ipworkssmime_smime_do_verifysignature($res);

Remarks

The S/MIME class implements the S/MIME V3 standard for encryption and decryption using Public Key Cryptography Standards (PKCS). In addition, the class can be used to both generate and verify RSA digital signatures. Using this class for decrypting or signing requires a valid digital certificate with a private key.

Before performing an operation the input and output values should be specified.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputMessage

When a valid source is found, the search stops. The order in which the output properties are checked is as follows:

• OutputFile
• OutputMessage: The output data is written to this property if no other destination is specified.

The headers of the input message (if any) will be read from InputMessageHeaders or InputMessageHeadersString.

The headers of the resulting message will be available in the OutputMessageHeaders and OutputMessageHeadersString properties.

Signing

To sign the current data included in the input message with a certificate, the Certificate property must be set to a valid Certificate object for the signing certificate. The IncludeCertificate and DetachedSignature properties allow you to specify additional details about the signing process. By setting IncludeCertificate to True, digital certificates can be encoded and included in message signature when signing the document. Including a certificate is the preferred method of building signed messages. In addition the S/MIME class can also generate PKCS #7 formatted detached digital signatures and envelopes by specifying DetachedSignature.

Encrypting

To encrypt a message with the class in a PKCS envelope, you must first specify the Certificate for each recipient in the RecipientCerts properties to encrypt the message with. You can easily add these with the AddRecipientCert method. Once you have done this you can call the Encrypt method to encrypt the message with the recipient certificates.

In addition, the class allows you to sign and encrypt simultaneously with the SignAndEncrypt method. You must set all of the properties needed for both Sign and Encrypt

The result of the encrypted or signed data will be replaced in the OutputMessage property and the OutputMessageHeaders property will be filled with the appropriate mime headers if applicable.

Decrypting

Decrypting PKCS envelopes is handled with the Decrypt method. When this method is called, the class will attempt to find an appropriate certificate in the Certificate property that matches the encrypting certificate. If it cannot find an appropriate certificate, an exception will be thrown and the message will not be decrypted.

Verifying Signatures

In addition, the S/MIME class can be used to verify signatures included in signed messages or documents. After specifying the input, VerifySignature can then be used to verify the signature. If the message does not have a certificate attached, more then likely an exception will be thrown and the class will not be able to verify the signature. If VerifySignature is successful, the SignerCert and SignerCertChain properties will be filled with the certificate information of the message signer. This information can be used to verify the signing certificates.

Similar to SignAndEncrypt, DecryptAndVerifySignature can be used to both decrypt and verify the message in Message.

Property List

---

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

CertEffectiveDate Property (IPWorksSMIME_SMIME Class)

The date on which this certificate becomes valid.

Object Oriented Interface

public function getCertEffectiveDate();

Procedural Interface

ipworkssmime_smime_get($res, 1 );

Default Value

''

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

CertExpirationDate Property (IPWorksSMIME_SMIME Class)

The date on which the certificate expires.

Object Oriented Interface

public function getCertExpirationDate();

Procedural Interface

ipworkssmime_smime_get($res, 2 );

Default Value

''

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

CertExtendedKeyUsage Property (IPWorksSMIME_SMIME Class)

A comma-delimited list of extended key usage identifiers.

Object Oriented Interface

public function getCertExtendedKeyUsage();

Procedural Interface

ipworkssmime_smime_get($res, 3 );

Default Value

''

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

CertFingerprint Property (IPWorksSMIME_SMIME Class)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Object Oriented Interface

public function getCertFingerprint();

Procedural Interface

ipworkssmime_smime_get($res, 4 );

Default Value

''

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

CertFingerprintSHA1 Property (IPWorksSMIME_SMIME Class)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Object Oriented Interface

public function getCertFingerprintSHA1();

Procedural Interface

ipworkssmime_smime_get($res, 5 );

Default Value

''

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

CertFingerprintSHA256 Property (IPWorksSMIME_SMIME Class)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Object Oriented Interface

public function getCertFingerprintSHA256();

Procedural Interface

ipworkssmime_smime_get($res, 6 );

Default Value

''

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

CertIssuer Property (IPWorksSMIME_SMIME Class)

The issuer of the certificate.

Object Oriented Interface

public function getCertIssuer();

Procedural Interface

ipworkssmime_smime_get($res, 7 );

Default Value

''

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

CertPrivateKey Property (IPWorksSMIME_SMIME Class)

The private key of the certificate (if available).

Object Oriented Interface

public function getCertPrivateKey();

Procedural Interface

ipworkssmime_smime_get($res, 8 );

Default Value

''

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The CertPrivateKey may be available but not exportable. In this case, CertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

CertPrivateKeyAvailable Property (IPWorksSMIME_SMIME Class)

Whether a PrivateKey is available for the selected certificate.

Object Oriented Interface

public function getCertPrivateKeyAvailable();

Procedural Interface

ipworkssmime_smime_get($res, 9 );

Default Value

false

Remarks

Whether a CertPrivateKey is available for the selected certificate. If CertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

CertPrivateKeyContainer Property (IPWorksSMIME_SMIME Class)

The name of the PrivateKey container for the certificate (if available).

Object Oriented Interface

public function getCertPrivateKeyContainer();

Procedural Interface

ipworkssmime_smime_get($res, 10 );

Default Value

''

Remarks

The name of the CertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

CertPublicKey Property (IPWorksSMIME_SMIME Class)

The public key of the certificate.

Object Oriented Interface

public function getCertPublicKey();

Procedural Interface

ipworkssmime_smime_get($res, 11 );

Default Value

''

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

CertPublicKeyAlgorithm Property (IPWorksSMIME_SMIME Class)

The textual description of the certificate's public key algorithm.

Object Oriented Interface

public function getCertPublicKeyAlgorithm();

Procedural Interface

ipworkssmime_smime_get($res, 12 );

Default Value

''

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

CertPublicKeyLength Property (IPWorksSMIME_SMIME Class)

The length of the certificate's public key (in bits).

Object Oriented Interface

public function getCertPublicKeyLength();

Procedural Interface

ipworkssmime_smime_get($res, 13 );

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

CertSerialNumber Property (IPWorksSMIME_SMIME Class)

The serial number of the certificate encoded as a string.

Object Oriented Interface

public function getCertSerialNumber();

Procedural Interface

ipworkssmime_smime_get($res, 14 );

Default Value

''

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

CertSignatureAlgorithm Property (IPWorksSMIME_SMIME Class)

The text description of the certificate's signature algorithm.

Object Oriented Interface

public function getCertSignatureAlgorithm();

Procedural Interface

ipworkssmime_smime_get($res, 15 );

Default Value

''

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

CertStore Property (IPWorksSMIME_SMIME Class)

The name of the certificate store for the client certificate.

Object Oriented Interface

public function getCertStore();
public function setCertStore($value);

Procedural Interface

ipworkssmime_smime_get($res, 16 );
ipworkssmime_smime_set($res, 16, $value );

Default Value

'MY'

Remarks

The name of the certificate store for the client certificate.

The CertStoreType property denotes the type of the certificate store specified by CertStore. If the store is password-protected, specify the password in CertStorePassword.

CertStore is used in conjunction with the CertSubject property to specify client certificates. If CertStore has a value, and CertSubject or CertEncoded is set, a search for a certificate is initiated. Please see the CertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Binary String

CertStorePassword Property (IPWorksSMIME_SMIME Class)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Object Oriented Interface

public function getCertStorePassword();
public function setCertStorePassword($value);

Procedural Interface

ipworkssmime_smime_get($res, 17 );
ipworkssmime_smime_set($res, 17, $value );

Default Value

''

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

CertStoreType Property (IPWorksSMIME_SMIME Class)

The type of certificate store for this certificate.

Object Oriented Interface

public function getCertStoreType();
public function setCertStoreType($value);

Procedural Interface

ipworkssmime_smime_get($res, 18 );
ipworkssmime_smime_set($res, 18, $value );

Default Value

0

Remarks

The type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

Data Type

Integer

CertSubjectAltNames Property (IPWorksSMIME_SMIME Class)

Comma-separated lists of alternative subject names for the certificate.

Object Oriented Interface

public function getCertSubjectAltNames();

Procedural Interface

ipworkssmime_smime_get($res, 19 );

Default Value

''

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

CertThumbprintMD5 Property (IPWorksSMIME_SMIME Class)

The MD5 hash of the certificate.

Object Oriented Interface

public function getCertThumbprintMD5();

Procedural Interface

ipworkssmime_smime_get($res, 20 );

Default Value

''

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

CertThumbprintSHA1 Property (IPWorksSMIME_SMIME Class)

The SHA-1 hash of the certificate.

Object Oriented Interface

public function getCertThumbprintSHA1();

Procedural Interface

ipworkssmime_smime_get($res, 21 );

Default Value

''

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

CertThumbprintSHA256 Property (IPWorksSMIME_SMIME Class)

The SHA-256 hash of the certificate.

Object Oriented Interface

public function getCertThumbprintSHA256();

Procedural Interface

ipworkssmime_smime_get($res, 22 );

Default Value

''

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

CertUsage Property (IPWorksSMIME_SMIME Class)

The text description of UsageFlags .

Object Oriented Interface

public function getCertUsage();

Procedural Interface

ipworkssmime_smime_get($res, 23 );

Default Value

''

Remarks

The text description of CertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

CertUsageFlags Property (IPWorksSMIME_SMIME Class)

The flags that show intended use for the certificate.

Object Oriented Interface

public function getCertUsageFlags();

Procedural Interface

ipworkssmime_smime_get($res, 24 );

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of CertUsageFlags is a combination of the following flags:

Please see the CertUsage property for a text representation of CertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

CertVersion Property (IPWorksSMIME_SMIME Class)

The certificate's version number.

Object Oriented Interface

public function getCertVersion();

Procedural Interface

ipworkssmime_smime_get($res, 25 );

Default Value

''

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

CertSubject Property (IPWorksSMIME_SMIME Class)

The subject of the certificate used for client authentication.

Object Oriented Interface

public function getCertSubject();
public function setCertSubject($value);

Procedural Interface

ipworkssmime_smime_get($res, 26 );
ipworkssmime_smime_set($res, 26, $value );

Default Value

''

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

CertEncoded Property (IPWorksSMIME_SMIME Class)

The certificate (PEM/Base64 encoded).

Object Oriented Interface

public function getCertEncoded();
public function setCertEncoded($value);

Procedural Interface

ipworkssmime_smime_get($res, 27 );
ipworkssmime_smime_set($res, 27, $value );

Default Value

''

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The CertStore and CertSubject properties also may be used to specify a certificate.

When CertEncoded is set, a search is initiated in the current CertStore for the private key of the certificate. If the key is found, CertSubject is updated to reflect the full subject of the selected certificate; otherwise, CertSubject is set to an empty string.

This property is not available at design time.

Data Type

Binary String

DetachedSignature Property (IPWorksSMIME_SMIME Class)

This property specifies whether to include a detached signature when signing a message.

Object Oriented Interface

public function getDetachedSignature();
public function setDetachedSignature($value);

Procedural Interface

ipworkssmime_smime_get($res, 28 );
ipworkssmime_smime_set($res, 28, $value );

Default Value

true

Remarks

This property specifies whether to include a detached signature when signing a message. If the value of this property is True, Message will be encoded as a multipart/signed MIME message with a detached signature when calling Sign. This will create a message with two MIME parts, one with the contents of Message, and another with the detached signature.

If this property is False, the current contents of Message will be PKCS encoded and included with the signature in Message. This will create a single-part message with no MIME boundaries.

Data Type

Boolean

EncryptingAlgorithm Property (IPWorksSMIME_SMIME Class)

The property includes textual description of the encrypting algorithm.

Object Oriented Interface

public function getEncryptingAlgorithm();
public function setEncryptingAlgorithm($value);

Procedural Interface

ipworkssmime_smime_get($res, 29 );
ipworkssmime_smime_set($res, 29, $value );

Default Value

'3DES'

Remarks

This property contains either the name of the algorithm (such as 3DES or AES), or an object identifier (OID) string representing the algorithm.

Possible values are as follows:

• "3DES"
• "DES"
• "RC2CBC40"
• "RC2CBC64"
• "RC2CBC128" or "RC2"
• "AESCBC128" or "AES"
• "AESCBC192"
• "AESCBC256"
• "AESGCM128" or "AESGCM"
• "AESGCM192"
• "AESGCM256"

Data Type

String

IncludeCertificate Property (IPWorksSMIME_SMIME Class)

This property specifies whether to include the signer's certificate with the signed message.

Object Oriented Interface

public function getIncludeCertificate();
public function setIncludeCertificate($value);

Procedural Interface

ipworkssmime_smime_get($res, 30 );
ipworkssmime_smime_set($res, 30, $value );

Default Value

true

Remarks

If this property is set to True, the certificate used to sign the message will be encoded and included in a message signature when calling Sign or SignAndEncrypt.

Including a certificate is the preferred method of building signed messages. If you do not include a certificate, the message recipient may not be able to verify the sender's signature.

Data Type

Boolean

IncludeChain Property (IPWorksSMIME_SMIME Class)

This property specifies whether to include the signer's certificate chain with the signed message.

Object Oriented Interface

public function getIncludeChain();
public function setIncludeChain($value);

Procedural Interface

ipworkssmime_smime_get($res, 31 );
ipworkssmime_smime_set($res, 31, $value );

Default Value

false

Remarks

If this property is set to True, the entire certificate's chain that was used to sign the message will be encoded and included in the message signature when calling Sign or SignAndEncrypt.

Note: To include the chain, the IncludeCertificate property must also be set to true.

Data Type

Boolean

IncludeHeaders Property (IPWorksSMIME_SMIME Class)

This property tells the class whether to include the headers when encoding the message.

Object Oriented Interface

public function getIncludeHeaders();
public function setIncludeHeaders($value);

Procedural Interface

ipworkssmime_smime_get($res, 32 );
ipworkssmime_smime_set($res, 32, $value );

Default Value

false

Remarks

If True, the class will include the headers when Sign, Encrypt, or SignAndEncrypt are called. If False, only the message will be encoded.

The default value for IncludeHeaders is False.

Data Type

Boolean

InputFile Property (IPWorksSMIME_SMIME Class)

This property includes the file to process.

Object Oriented Interface

public function getInputFile();
public function setInputFile($value);

Procedural Interface

ipworkssmime_smime_get($res, 33 );
ipworkssmime_smime_set($res, 33, $value );

Default Value

''

Remarks

This property specifies the file to be processed. Set this property to the full or relative path to the file that will be processed.

Encrypt and/or Sign

When encrypting or signing, this may be set to a file containing content that will be encrypted and/or signed.

Decrypt and/or Verify

When decrypting or verifying a signature, this may be set to a file containing the fully encoded S/MIME message.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputMessage

When a valid source is found, the search stops. The order in which the output properties are checked is as follows:

• OutputFile
• OutputMessage: The output data is written to this property if no other destination is specified.

The headers of the input message (if any) will be read from InputMessageHeaders or InputMessageHeadersString.

Data Type

String

InputMessage Property (IPWorksSMIME_SMIME Class)

This property includes the message to process.

Object Oriented Interface

public function getInputMessage();
public function setInputMessage($value);

Procedural Interface

ipworkssmime_smime_get($res, 34 );
ipworkssmime_smime_set($res, 34, $value );

Default Value

''

Remarks

This property specifies the message to be processed.

Encrypt and/or Sign

When encrypting or signing, this may be set to the content that will be encrypted and/or signed.

Decrypt and/or Verify

When decrypting or verifying a signature, this may be set to the fully encoded S/MIME message.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputMessage

When a valid source is found, the search stops. The order in which the output properties are checked is as follows:

• OutputFile
• OutputMessage: The output data is written to this property if no other destination is specified.

The headers of the input message (if any) will be read from InputMessageHeaders or InputMessageHeadersString.

Data Type

Binary String

InputMessageHeaderCount Property (IPWorksSMIME_SMIME Class)

The number of records in the InputMessageHeader arrays.

Object Oriented Interface

public function getInputMessageHeaderCount();
public function setInputMessageHeaderCount($value);

Procedural Interface

ipworkssmime_smime_get($res, 35 );
ipworkssmime_smime_set($res, 35, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

• InputMessageHeaderField
• InputMessageHeaderValue

The array indices start at 0 and end at InputMessageHeaderCount - 1.

This property is not available at design time.

Data Type

Integer

InputMessageHeaderField Property (IPWorksSMIME_SMIME Class)

This property contains the name of the HTTP header (this is the same case as it is delivered).

Object Oriented Interface

public function getInputMessageHeaderField($inputmessageheaderindex);
public function setInputMessageHeaderField($inputmessageheaderindex, $value);

Procedural Interface

ipworkssmime_smime_get($res, 36 , $inputmessageheaderindex);
ipworkssmime_smime_set($res, 36, $value , $inputmessageheaderindex);

Default Value

''

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The $inputmessageheaderindex parameter specifies the index of the item in the array. The size of the array is controlled by the InputMessageHeaderCount property.

This property is not available at design time.

Data Type

String

InputMessageHeaderValue Property (IPWorksSMIME_SMIME Class)

This property contains the header contents.

Object Oriented Interface

public function getInputMessageHeaderValue($inputmessageheaderindex);
public function setInputMessageHeaderValue($inputmessageheaderindex, $value);

Procedural Interface

ipworkssmime_smime_get($res, 37 , $inputmessageheaderindex);
ipworkssmime_smime_set($res, 37, $value , $inputmessageheaderindex);

Default Value

''

Remarks

This property contains the Header contents.

The $inputmessageheaderindex parameter specifies the index of the item in the array. The size of the array is controlled by the InputMessageHeaderCount property.

This property is not available at design time.

Data Type

String

InputMessageHeadersString Property (IPWorksSMIME_SMIME Class)

This property includes the string version of headers from the S/MIME message.

Object Oriented Interface

public function getInputMessageHeadersString();
public function setInputMessageHeadersString($value);

Procedural Interface

ipworkssmime_smime_get($res, 38 );
ipworkssmime_smime_set($res, 38, $value );

Default Value

''

Remarks

This property contains the string version of headers from the S/MIME message.

This property may be set to the headers of the message that will be decrypted/verified.

Data Type

String

InternalHeaders Property (IPWorksSMIME_SMIME Class)

This property includes the headers of the MIME entity inside the encrypted or signed message.

Object Oriented Interface

public function getInternalHeaders();
public function setInternalHeaders($value);

Procedural Interface

ipworkssmime_smime_get($res, 39 );
ipworkssmime_smime_set($res, 39, $value );

Default Value

''

Remarks

After an encryption, decryption, signing, or verification operation is completed, this property shows the headers of the encrypted or signed message part.

This property is not available at design time.

Data Type

String

OutputFile Property (IPWorksSMIME_SMIME Class)

This property specifies the output file.

Object Oriented Interface

public function getOutputFile();
public function setOutputFile($value);

Procedural Interface

ipworkssmime_smime_get($res, 40 );
ipworkssmime_smime_set($res, 40, $value );

Default Value

''

Remarks

This property specifies the file to which the output will be written. This may be set to an absolute or relative path.

Encrypt and/or Sign

When encrypting or signing, this specifies a file where the fully encoded S/MIME message will be written.

Decrypt and/or Verify

When decrypting or verifying a signature, this specifies a file where the decrypted/verified content will be written.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputMessage

When a valid source is found, the search stops. The order in which the output properties are checked is as follows:

• OutputFile
• OutputMessage: The output data is written to this property if no other destination is specified.

The headers of the resulting message will be available in the OutputMessageHeaders and OutputMessageHeadersString properties.

Data Type

String

OutputMessage Property (IPWorksSMIME_SMIME Class)

This property includes the output message after processing.

Object Oriented Interface

public function getOutputMessage();

Procedural Interface

ipworkssmime_smime_get($res, 41 );

Default Value

''

Remarks

This property will be populated with the output of the operation if OutputFile is not set.

Encrypt and/or Sign

When encrypting or signing, this will hold the fully encoded S/MIME message.

Decrypt and/or Verify

When decrypting or verifying a signature, this will hold the decrypted/verified content.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputMessage

When a valid source is found, the search stops. The order in which the output properties are checked is as follows:

• OutputFile
• OutputMessage: The output data is written to this property if no other destination is specified.

The headers of the resulting message will be available in the OutputMessageHeaders and OutputMessageHeadersString properties.

This property is read-only.

Data Type

Binary String

OutputMessageHeaderCount Property (IPWorksSMIME_SMIME Class)

The number of records in the OutputMessageHeader arrays.

Object Oriented Interface

public function getOutputMessageHeaderCount();

Procedural Interface

ipworkssmime_smime_get($res, 42 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• OutputMessageHeaderField
• OutputMessageHeaderValue

The array indices start at 0 and end at OutputMessageHeaderCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

OutputMessageHeaderField Property (IPWorksSMIME_SMIME Class)

This property contains the name of the HTTP header (this is the same case as it is delivered).

Object Oriented Interface

public function getOutputMessageHeaderField($outputmessageheaderindex);

Procedural Interface

ipworkssmime_smime_get($res, 43 , $outputmessageheaderindex);

Default Value

''

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The $outputmessageheaderindex parameter specifies the index of the item in the array. The size of the array is controlled by the OutputMessageHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

OutputMessageHeaderValue Property (IPWorksSMIME_SMIME Class)

This property contains the header contents.

Object Oriented Interface

public function getOutputMessageHeaderValue($outputmessageheaderindex);

Procedural Interface

ipworkssmime_smime_get($res, 44 , $outputmessageheaderindex);

Default Value

''

Remarks

This property contains the Header contents.

The $outputmessageheaderindex parameter specifies the index of the item in the array. The size of the array is controlled by the OutputMessageHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

OutputMessageHeadersString Property (IPWorksSMIME_SMIME Class)

This property includes a string version of headers from the S/MIME message.

Object Oriented Interface

public function getOutputMessageHeadersString();

Procedural Interface

ipworkssmime_smime_get($res, 45 );

Default Value

''

Remarks

This property contains the string version of headers from the S/MIME message. The class will populate this property after signing and/or encrypting.

The user should use these additional headers when emailing or sending the OutputMessage. This can be done by including these headers in the OtherHeaders property of the class that you wish to send the message with.

After the decryption or verification, this property contains the headers of the verified or decrypted message.

This property is read-only.

Data Type

String

Overwrite Property (IPWorksSMIME_SMIME Class)

This property indicates whether or not the class should overwrite files.

Object Oriented Interface

public function getOverwrite();
public function setOverwrite($value);

Procedural Interface

ipworkssmime_smime_get($res, 46 );
ipworkssmime_smime_set($res, 46, $value );

Default Value

true

Remarks

This property indicates whether or not the class will overwrite OutputFile. If Overwrite is False, an error will be thrown whenever OutputFile exists before an operation. The default value is False.

Data Type

Boolean

RecipientCertCount Property (IPWorksSMIME_SMIME Class)

The number of records in the RecipientCert arrays.

Object Oriented Interface

public function getRecipientCertCount();
public function setRecipientCertCount($value);

Procedural Interface

ipworkssmime_smime_get($res, 47 );
ipworkssmime_smime_set($res, 47, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

• RecipientCertEffectiveDate
• RecipientCertEncoded
• RecipientCertExpirationDate
• RecipientCertExtendedKeyUsage
• RecipientCertFingerprint
• RecipientCertFingerprintSHA1
• RecipientCertFingerprintSHA256
• RecipientCertIssuer
• RecipientCertPrivateKey
• RecipientCertPrivateKeyAvailable
• RecipientCertPrivateKeyContainer
• RecipientCertPublicKey
• RecipientCertPublicKeyAlgorithm
• RecipientCertPublicKeyLength
• RecipientCertSerialNumber
• RecipientCertSignatureAlgorithm
• RecipientCertStore
• RecipientCertStorePassword
• RecipientCertStoreType
• RecipientCertSubject
• RecipientCertSubjectAltNames
• RecipientCertThumbprintMD5
• RecipientCertThumbprintSHA1
• RecipientCertThumbprintSHA256
• RecipientCertUsage
• RecipientCertUsageFlags
• RecipientCertVersion

The array indices start at 0 and end at RecipientCertCount - 1.

This property is not available at design time.

Data Type

Integer

RecipientCertEffectiveDate Property (IPWorksSMIME_SMIME Class)

The date on which this certificate becomes valid.

Object Oriented Interface

public function getRecipientCertEffectiveDate($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 48 , $recipientcertindex);

Default Value

''

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertExpirationDate Property (IPWorksSMIME_SMIME Class)

The date on which the certificate expires.

Object Oriented Interface

public function getRecipientCertExpirationDate($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 49 , $recipientcertindex);

Default Value

''

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertExtendedKeyUsage Property (IPWorksSMIME_SMIME Class)

A comma-delimited list of extended key usage identifiers.

Object Oriented Interface

public function getRecipientCertExtendedKeyUsage($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 50 , $recipientcertindex);

Default Value

''

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertFingerprint Property (IPWorksSMIME_SMIME Class)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Object Oriented Interface

public function getRecipientCertFingerprint($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 51 , $recipientcertindex);

Default Value

''

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertFingerprintSHA1 Property (IPWorksSMIME_SMIME Class)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Object Oriented Interface

public function getRecipientCertFingerprintSHA1($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 52 , $recipientcertindex);

Default Value

''

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertFingerprintSHA256 Property (IPWorksSMIME_SMIME Class)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Object Oriented Interface

public function getRecipientCertFingerprintSHA256($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 53 , $recipientcertindex);

Default Value

''

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertIssuer Property (IPWorksSMIME_SMIME Class)

The issuer of the certificate.

Object Oriented Interface

public function getRecipientCertIssuer($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 54 , $recipientcertindex);

Default Value

''

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertPrivateKey Property (IPWorksSMIME_SMIME Class)

The private key of the certificate (if available).

Object Oriented Interface

public function getRecipientCertPrivateKey($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 55 , $recipientcertindex);

Default Value

''

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The RecipientCertPrivateKey may be available but not exportable. In this case, RecipientCertPrivateKey returns an empty string.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertPrivateKeyAvailable Property (IPWorksSMIME_SMIME Class)

Whether a PrivateKey is available for the selected certificate.

Object Oriented Interface

public function getRecipientCertPrivateKeyAvailable($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 56 , $recipientcertindex);

Default Value

false

Remarks

Whether a RecipientCertPrivateKey is available for the selected certificate. If RecipientCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

RecipientCertPrivateKeyContainer Property (IPWorksSMIME_SMIME Class)

The name of the PrivateKey container for the certificate (if available).

Object Oriented Interface

public function getRecipientCertPrivateKeyContainer($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 57 , $recipientcertindex);

Default Value

''

Remarks

The name of the RecipientCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertPublicKey Property (IPWorksSMIME_SMIME Class)

The public key of the certificate.

Object Oriented Interface

public function getRecipientCertPublicKey($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 58 , $recipientcertindex);

Default Value

''

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertPublicKeyAlgorithm Property (IPWorksSMIME_SMIME Class)

The textual description of the certificate's public key algorithm.

Object Oriented Interface

public function getRecipientCertPublicKeyAlgorithm($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 59 , $recipientcertindex);

Default Value

''

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertPublicKeyLength Property (IPWorksSMIME_SMIME Class)

The length of the certificate's public key (in bits).

Object Oriented Interface

public function getRecipientCertPublicKeyLength($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 60 , $recipientcertindex);

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

RecipientCertSerialNumber Property (IPWorksSMIME_SMIME Class)

The serial number of the certificate encoded as a string.

Object Oriented Interface

public function getRecipientCertSerialNumber($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 61 , $recipientcertindex);

Default Value

''

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertSignatureAlgorithm Property (IPWorksSMIME_SMIME Class)

The text description of the certificate's signature algorithm.

Object Oriented Interface

public function getRecipientCertSignatureAlgorithm($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 62 , $recipientcertindex);

Default Value

''

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertStore Property (IPWorksSMIME_SMIME Class)

The name of the certificate store for the client certificate.

Object Oriented Interface

public function getRecipientCertStore($recipientcertindex);
public function setRecipientCertStore($recipientcertindex, $value);

Procedural Interface

ipworkssmime_smime_get($res, 63 , $recipientcertindex);
ipworkssmime_smime_set($res, 63, $value , $recipientcertindex);

Default Value

'MY'

Remarks

The name of the certificate store for the client certificate.

The RecipientCertStoreType property denotes the type of the certificate store specified by RecipientCertStore. If the store is password-protected, specify the password in RecipientCertStorePassword.

RecipientCertStore is used in conjunction with the RecipientCertSubject property to specify client certificates. If RecipientCertStore has a value, and RecipientCertSubject or RecipientCertEncoded is set, a search for a certificate is initiated. Please see the RecipientCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is not available at design time.

Data Type

Binary String

RecipientCertStorePassword Property (IPWorksSMIME_SMIME Class)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Object Oriented Interface

public function getRecipientCertStorePassword($recipientcertindex);
public function setRecipientCertStorePassword($recipientcertindex, $value);

Procedural Interface

ipworkssmime_smime_get($res, 64 , $recipientcertindex);
ipworkssmime_smime_set($res, 64, $value , $recipientcertindex);

Default Value

''

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is not available at design time.

Data Type

String

RecipientCertStoreType Property (IPWorksSMIME_SMIME Class)

The type of certificate store for this certificate.

Object Oriented Interface

public function getRecipientCertStoreType($recipientcertindex);
public function setRecipientCertStoreType($recipientcertindex, $value);

Procedural Interface

ipworkssmime_smime_get($res, 65 , $recipientcertindex);
ipworkssmime_smime_set($res, 65, $value , $recipientcertindex);

Default Value

0

Remarks

The type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is not available at design time.

Data Type

Integer

RecipientCertSubjectAltNames Property (IPWorksSMIME_SMIME Class)

Comma-separated lists of alternative subject names for the certificate.

Object Oriented Interface

public function getRecipientCertSubjectAltNames($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 66 , $recipientcertindex);

Default Value

''

Remarks

Comma-separated lists of alternative subject names for the certificate.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertThumbprintMD5 Property (IPWorksSMIME_SMIME Class)

The MD5 hash of the certificate.

Object Oriented Interface

public function getRecipientCertThumbprintMD5($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 67 , $recipientcertindex);

Default Value

''

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertThumbprintSHA1 Property (IPWorksSMIME_SMIME Class)

The SHA-1 hash of the certificate.

Object Oriented Interface

public function getRecipientCertThumbprintSHA1($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 68 , $recipientcertindex);

Default Value

''

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertThumbprintSHA256 Property (IPWorksSMIME_SMIME Class)

The SHA-256 hash of the certificate.

Object Oriented Interface

public function getRecipientCertThumbprintSHA256($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 69 , $recipientcertindex);

Default Value

''

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertUsage Property (IPWorksSMIME_SMIME Class)

The text description of UsageFlags .

Object Oriented Interface

public function getRecipientCertUsage($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 70 , $recipientcertindex);

Default Value

''

Remarks

The text description of RecipientCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertUsageFlags Property (IPWorksSMIME_SMIME Class)

The flags that show intended use for the certificate.

Object Oriented Interface

public function getRecipientCertUsageFlags($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 71 , $recipientcertindex);

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of RecipientCertUsageFlags is a combination of the following flags:

Please see the RecipientCertUsage property for a text representation of RecipientCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

RecipientCertVersion Property (IPWorksSMIME_SMIME Class)

The certificate's version number.

Object Oriented Interface

public function getRecipientCertVersion($recipientcertindex);

Procedural Interface

ipworkssmime_smime_get($res, 72 , $recipientcertindex);

Default Value

''

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is read-only and not available at design time.

Data Type

String

RecipientCertSubject Property (IPWorksSMIME_SMIME Class)

The subject of the certificate used for client authentication.

Object Oriented Interface

public function getRecipientCertSubject($recipientcertindex);
public function setRecipientCertSubject($recipientcertindex, $value);

Procedural Interface

ipworkssmime_smime_get($res, 73 , $recipientcertindex);
ipworkssmime_smime_set($res, 73, $value , $recipientcertindex);

Default Value

''

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is not available at design time.

Data Type

String

RecipientCertEncoded Property (IPWorksSMIME_SMIME Class)

The certificate (PEM/Base64 encoded).

Object Oriented Interface

public function getRecipientCertEncoded($recipientcertindex);
public function setRecipientCertEncoded($recipientcertindex, $value);

Procedural Interface

ipworkssmime_smime_get($res, 74 , $recipientcertindex);
ipworkssmime_smime_set($res, 74, $value , $recipientcertindex);

Default Value

''

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The RecipientCertStore and RecipientCertSubject properties also may be used to specify a certificate.

When RecipientCertEncoded is set, a search is initiated in the current RecipientCertStore for the private key of the certificate. If the key is found, RecipientCertSubject is updated to reflect the full subject of the selected certificate; otherwise, RecipientCertSubject is set to an empty string.

The $recipientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the RecipientCertCount property.

This property is not available at design time.

Data Type

Binary String

SignerCertEffectiveDate Property (IPWorksSMIME_SMIME Class)

The date on which this certificate becomes valid.

Object Oriented Interface

public function getSignerCertEffectiveDate();

Procedural Interface

ipworkssmime_smime_get($res, 75 );

Default Value

''

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SignerCertExpirationDate Property (IPWorksSMIME_SMIME Class)

The date on which the certificate expires.

Object Oriented Interface

public function getSignerCertExpirationDate();

Procedural Interface

ipworkssmime_smime_get($res, 76 );

Default Value

''

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SignerCertExtendedKeyUsage Property (IPWorksSMIME_SMIME Class)

A comma-delimited list of extended key usage identifiers.

Object Oriented Interface

public function getSignerCertExtendedKeyUsage();

Procedural Interface

ipworkssmime_smime_get($res, 77 );

Default Value

''

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SignerCertFingerprint Property (IPWorksSMIME_SMIME Class)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Object Oriented Interface

public function getSignerCertFingerprint();

Procedural Interface

ipworkssmime_smime_get($res, 78 );

Default Value

''

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SignerCertFingerprintSHA1 Property (IPWorksSMIME_SMIME Class)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Object Oriented Interface

public function getSignerCertFingerprintSHA1();

Procedural Interface

ipworkssmime_smime_get($res, 79 );

Default Value

''

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SignerCertFingerprintSHA256 Property (IPWorksSMIME_SMIME Class)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Object Oriented Interface

public function getSignerCertFingerprintSHA256();

Procedural Interface

ipworkssmime_smime_get($res, 80 );

Default Value

''

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SignerCertIssuer Property (IPWorksSMIME_SMIME Class)

The issuer of the certificate.

Object Oriented Interface

public function getSignerCertIssuer();

Procedural Interface

ipworkssmime_smime_get($res, 81 );

Default Value

''

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SignerCertPrivateKey Property (IPWorksSMIME_SMIME Class)

The private key of the certificate (if available).

Object Oriented Interface

public function getSignerCertPrivateKey();

Procedural Interface

ipworkssmime_smime_get($res, 82 );

Default Value

''

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SignerCertPrivateKey may be available but not exportable. In this case, SignerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SignerCertPrivateKeyAvailable Property (IPWorksSMIME_SMIME Class)

Whether a PrivateKey is available for the selected certificate.

Object Oriented Interface

public function getSignerCertPrivateKeyAvailable();

Procedural Interface

ipworkssmime_smime_get($res, 83 );

Default Value

false

Remarks

Whether a SignerCertPrivateKey is available for the selected certificate. If SignerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SignerCertPrivateKeyContainer Property (IPWorksSMIME_SMIME Class)

The name of the PrivateKey container for the certificate (if available).

Object Oriented Interface

public function getSignerCertPrivateKeyContainer();

Procedural Interface

ipworkssmime_smime_get($res, 84 );

Default Value

''

Remarks

The name of the SignerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SignerCertPublicKey Property (IPWorksSMIME_SMIME Class)

The public key of the certificate.

Object Oriented Interface

public function getSignerCertPublicKey();

Procedural Interface

ipworkssmime_smime_get($res, 85 );

Default Value

''

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SignerCertPublicKeyAlgorithm Property (IPWorksSMIME_SMIME Class)

The textual description of the certificate's public key algorithm.

Object Oriented Interface

public function getSignerCertPublicKeyAlgorithm();

Procedural Interface

ipworkssmime_smime_get($res, 86 );

Default Value

''

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SignerCertPublicKeyLength Property (IPWorksSMIME_SMIME Class)

The length of the certificate's public key (in bits).

Object Oriented Interface

public function getSignerCertPublicKeyLength();

Procedural Interface

ipworkssmime_smime_get($res, 87 );

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SignerCertSerialNumber Property (IPWorksSMIME_SMIME Class)

The serial number of the certificate encoded as a string.

Object Oriented Interface

public function getSignerCertSerialNumber();

Procedural Interface

ipworkssmime_smime_get($res, 88 );

Default Value

''

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SignerCertSignatureAlgorithm Property (IPWorksSMIME_SMIME Class)

The text description of the certificate's signature algorithm.

Object Oriented Interface

public function getSignerCertSignatureAlgorithm();

Procedural Interface

ipworkssmime_smime_get($res, 89 );

Default Value

''

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SignerCertStore Property (IPWorksSMIME_SMIME Class)

The name of the certificate store for the client certificate.

Object Oriented Interface

public function getSignerCertStore();
public function setSignerCertStore($value);

Procedural Interface

ipworkssmime_smime_get($res, 90 );
ipworkssmime_smime_set($res, 90, $value );

Default Value

'MY'

Remarks

The name of the certificate store for the client certificate.

The SignerCertStoreType property denotes the type of the certificate store specified by SignerCertStore. If the store is password-protected, specify the password in SignerCertStorePassword.

SignerCertStore is used in conjunction with the SignerCertSubject property to specify client certificates. If SignerCertStore has a value, and SignerCertSubject or SignerCertEncoded is set, a search for a certificate is initiated. Please see the SignerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Binary String

SignerCertStorePassword Property (IPWorksSMIME_SMIME Class)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Object Oriented Interface

public function getSignerCertStorePassword();
public function setSignerCertStorePassword($value);

Procedural Interface

ipworkssmime_smime_get($res, 91 );
ipworkssmime_smime_set($res, 91, $value );

Default Value

''

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SignerCertStoreType Property (IPWorksSMIME_SMIME Class)

The type of certificate store for this certificate.

Object Oriented Interface

public function getSignerCertStoreType();
public function setSignerCertStoreType($value);

Procedural Interface

ipworkssmime_smime_get($res, 92 );
ipworkssmime_smime_set($res, 92, $value );

Default Value

0

Remarks

The type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SignerCertSubjectAltNames Property (IPWorksSMIME_SMIME Class)

Comma-separated lists of alternative subject names for the certificate.

Object Oriented Interface

public function getSignerCertSubjectAltNames();

Procedural Interface

ipworkssmime_smime_get($res, 93 );

Default Value

''

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SignerCertThumbprintMD5 Property (IPWorksSMIME_SMIME Class)

The MD5 hash of the certificate.

Object Oriented Interface

public function getSignerCertThumbprintMD5();

Procedural Interface

ipworkssmime_smime_get($res, 94 );

Default Value

''

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SignerCertThumbprintSHA1 Property (IPWorksSMIME_SMIME Class)

The SHA-1 hash of the certificate.

Object Oriented Interface

public function getSignerCertThumbprintSHA1();

Procedural Interface

ipworkssmime_smime_get($res, 95 );

Default Value

''

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SignerCertThumbprintSHA256 Property (IPWorksSMIME_SMIME Class)

The SHA-256 hash of the certificate.

Object Oriented Interface

public function getSignerCertThumbprintSHA256();

Procedural Interface

ipworkssmime_smime_get($res, 96 );

Default Value

''

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SignerCertUsage Property (IPWorksSMIME_SMIME Class)

The text description of UsageFlags .

Object Oriented Interface

public function getSignerCertUsage();

Procedural Interface

ipworkssmime_smime_get($res, 97 );

Default Value

''

Remarks

The text description of SignerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SignerCertUsageFlags Property (IPWorksSMIME_SMIME Class)

The flags that show intended use for the certificate.

Object Oriented Interface

public function getSignerCertUsageFlags();

Procedural Interface

ipworkssmime_smime_get($res, 98 );

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SignerCertUsageFlags is a combination of the following flags:

Please see the SignerCertUsage property for a text representation of SignerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SignerCertVersion Property (IPWorksSMIME_SMIME Class)

The certificate's version number.

Object Oriented Interface

public function getSignerCertVersion();

Procedural Interface

ipworkssmime_smime_get($res, 99 );

Default Value

''

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SignerCertSubject Property (IPWorksSMIME_SMIME Class)

The subject of the certificate used for client authentication.

Object Oriented Interface

public function getSignerCertSubject();
public function setSignerCertSubject($value);

Procedural Interface

ipworkssmime_smime_get($res, 100 );
ipworkssmime_smime_set($res, 100, $value );

Default Value

''

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SignerCertEncoded Property (IPWorksSMIME_SMIME Class)

The certificate (PEM/Base64 encoded).

Object Oriented Interface

public function getSignerCertEncoded();
public function setSignerCertEncoded($value);

Procedural Interface

ipworkssmime_smime_get($res, 101 );
ipworkssmime_smime_set($res, 101, $value );

Default Value

''

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SignerCertStore and SignerCertSubject properties also may be used to specify a certificate.

When SignerCertEncoded is set, a search is initiated in the current SignerCertStore for the private key of the certificate. If the key is found, SignerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SignerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Binary String

SignerCertChainCount Property (IPWorksSMIME_SMIME Class)

The number of records in the SignerCertChain arrays.

Object Oriented Interface

public function getSignerCertChainCount();

Procedural Interface

ipworkssmime_smime_get($res, 102 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• SignerCertChainEffectiveDate
• SignerCertChainEncoded
• SignerCertChainExpirationDate
• SignerCertChainExtendedKeyUsage
• SignerCertChainFingerprint
• SignerCertChainFingerprintSHA1
• SignerCertChainFingerprintSHA256
• SignerCertChainIssuer
• SignerCertChainPrivateKey
• SignerCertChainPrivateKeyAvailable
• SignerCertChainPrivateKeyContainer
• SignerCertChainPublicKey
• SignerCertChainPublicKeyAlgorithm
• SignerCertChainPublicKeyLength
• SignerCertChainSerialNumber
• SignerCertChainSignatureAlgorithm
• SignerCertChainStore
• SignerCertChainStorePassword
• SignerCertChainStoreType
• SignerCertChainSubject
• SignerCertChainSubjectAltNames
• SignerCertChainThumbprintMD5
• SignerCertChainThumbprintSHA1
• SignerCertChainThumbprintSHA256
• SignerCertChainUsage
• SignerCertChainUsageFlags
• SignerCertChainVersion

The array indices start at 0 and end at SignerCertChainCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SignerCertChainEffectiveDate Property (IPWorksSMIME_SMIME Class)

The date on which this certificate becomes valid.

Object Oriented Interface

public function getSignerCertChainEffectiveDate($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 103 , $signercertchainindex);

Default Value

''

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainExpirationDate Property (IPWorksSMIME_SMIME Class)

The date on which the certificate expires.

Object Oriented Interface

public function getSignerCertChainExpirationDate($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 104 , $signercertchainindex);

Default Value

''

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainExtendedKeyUsage Property (IPWorksSMIME_SMIME Class)

A comma-delimited list of extended key usage identifiers.

Object Oriented Interface

public function getSignerCertChainExtendedKeyUsage($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 105 , $signercertchainindex);

Default Value

''

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainFingerprint Property (IPWorksSMIME_SMIME Class)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Object Oriented Interface

public function getSignerCertChainFingerprint($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 106 , $signercertchainindex);

Default Value

''

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainFingerprintSHA1 Property (IPWorksSMIME_SMIME Class)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Object Oriented Interface

public function getSignerCertChainFingerprintSHA1($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 107 , $signercertchainindex);

Default Value

''

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainFingerprintSHA256 Property (IPWorksSMIME_SMIME Class)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Object Oriented Interface

public function getSignerCertChainFingerprintSHA256($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 108 , $signercertchainindex);

Default Value

''

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainIssuer Property (IPWorksSMIME_SMIME Class)

The issuer of the certificate.

Object Oriented Interface

public function getSignerCertChainIssuer($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 109 , $signercertchainindex);

Default Value

''

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainPrivateKey Property (IPWorksSMIME_SMIME Class)

The private key of the certificate (if available).

Object Oriented Interface

public function getSignerCertChainPrivateKey($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 110 , $signercertchainindex);

Default Value

''

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SignerCertChainPrivateKey may be available but not exportable. In this case, SignerCertChainPrivateKey returns an empty string.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainPrivateKeyAvailable Property (IPWorksSMIME_SMIME Class)

Whether a PrivateKey is available for the selected certificate.

Object Oriented Interface

public function getSignerCertChainPrivateKeyAvailable($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 111 , $signercertchainindex);

Default Value

false

Remarks

Whether a SignerCertChainPrivateKey is available for the selected certificate. If SignerCertChainPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignerCertChainPrivateKeyContainer Property (IPWorksSMIME_SMIME Class)

The name of the PrivateKey container for the certificate (if available).

Object Oriented Interface

public function getSignerCertChainPrivateKeyContainer($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 112 , $signercertchainindex);

Default Value

''

Remarks

The name of the SignerCertChainPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainPublicKey Property (IPWorksSMIME_SMIME Class)

The public key of the certificate.

Object Oriented Interface

public function getSignerCertChainPublicKey($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 113 , $signercertchainindex);

Default Value

''

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainPublicKeyAlgorithm Property (IPWorksSMIME_SMIME Class)

The textual description of the certificate's public key algorithm.

Object Oriented Interface

public function getSignerCertChainPublicKeyAlgorithm($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 114 , $signercertchainindex);

Default Value

''

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainPublicKeyLength Property (IPWorksSMIME_SMIME Class)

The length of the certificate's public key (in bits).

Object Oriented Interface

public function getSignerCertChainPublicKeyLength($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 115 , $signercertchainindex);

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignerCertChainSerialNumber Property (IPWorksSMIME_SMIME Class)

The serial number of the certificate encoded as a string.

Object Oriented Interface

public function getSignerCertChainSerialNumber($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 116 , $signercertchainindex);

Default Value

''

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainSignatureAlgorithm Property (IPWorksSMIME_SMIME Class)

The text description of the certificate's signature algorithm.

Object Oriented Interface

public function getSignerCertChainSignatureAlgorithm($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 117 , $signercertchainindex);

Default Value

''

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainStore Property (IPWorksSMIME_SMIME Class)

The name of the certificate store for the client certificate.

Object Oriented Interface

public function getSignerCertChainStore($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 118 , $signercertchainindex);

Default Value

'MY'

Remarks

The name of the certificate store for the client certificate.

The SignerCertChainStoreType property denotes the type of the certificate store specified by SignerCertChainStore. If the store is password-protected, specify the password in SignerCertChainStorePassword.

SignerCertChainStore is used in conjunction with the SignerCertChainSubject property to specify client certificates. If SignerCertChainStore has a value, and SignerCertChainSubject or SignerCertChainEncoded is set, a search for a certificate is initiated. Please see the SignerCertChainSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

Binary String

SignerCertChainStorePassword Property (IPWorksSMIME_SMIME Class)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Object Oriented Interface

public function getSignerCertChainStorePassword($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 119 , $signercertchainindex);

Default Value

''

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainStoreType Property (IPWorksSMIME_SMIME Class)

The type of certificate store for this certificate.

Object Oriented Interface

public function getSignerCertChainStoreType($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 120 , $signercertchainindex);

Default Value

0

Remarks

The type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignerCertChainSubjectAltNames Property (IPWorksSMIME_SMIME Class)

Comma-separated lists of alternative subject names for the certificate.

Object Oriented Interface

public function getSignerCertChainSubjectAltNames($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 121 , $signercertchainindex);

Default Value

''

Remarks

Comma-separated lists of alternative subject names for the certificate.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainThumbprintMD5 Property (IPWorksSMIME_SMIME Class)

The MD5 hash of the certificate.

Object Oriented Interface

public function getSignerCertChainThumbprintMD5($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 122 , $signercertchainindex);

Default Value

''

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainThumbprintSHA1 Property (IPWorksSMIME_SMIME Class)

The SHA-1 hash of the certificate.

Object Oriented Interface

public function getSignerCertChainThumbprintSHA1($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 123 , $signercertchainindex);

Default Value

''

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainThumbprintSHA256 Property (IPWorksSMIME_SMIME Class)

The SHA-256 hash of the certificate.

Object Oriented Interface

public function getSignerCertChainThumbprintSHA256($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 124 , $signercertchainindex);

Default Value

''

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainUsage Property (IPWorksSMIME_SMIME Class)

The text description of UsageFlags .

Object Oriented Interface

public function getSignerCertChainUsage($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 125 , $signercertchainindex);

Default Value

''

Remarks

The text description of SignerCertChainUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainUsageFlags Property (IPWorksSMIME_SMIME Class)

The flags that show intended use for the certificate.

Object Oriented Interface

public function getSignerCertChainUsageFlags($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 126 , $signercertchainindex);

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SignerCertChainUsageFlags is a combination of the following flags:

Please see the SignerCertChainUsage property for a text representation of SignerCertChainUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignerCertChainVersion Property (IPWorksSMIME_SMIME Class)

The certificate's version number.

Object Oriented Interface

public function getSignerCertChainVersion($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 127 , $signercertchainindex);

Default Value

''

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainSubject Property (IPWorksSMIME_SMIME Class)

The subject of the certificate used for client authentication.

Object Oriented Interface

public function getSignerCertChainSubject($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 128 , $signercertchainindex);

Default Value

''

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

String

SignerCertChainEncoded Property (IPWorksSMIME_SMIME Class)

The certificate (PEM/Base64 encoded).

Object Oriented Interface

public function getSignerCertChainEncoded($signercertchainindex);

Procedural Interface

ipworkssmime_smime_get($res, 129 , $signercertchainindex);

Default Value

''

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SignerCertChainStore and SignerCertChainSubject properties also may be used to specify a certificate.

When SignerCertChainEncoded is set, a search is initiated in the current SignerCertChainStore for the private key of the certificate. If the key is found, SignerCertChainSubject is updated to reflect the full subject of the selected certificate; otherwise, SignerCertChainSubject is set to an empty string.

The $signercertchainindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignerCertChainCount property.

This property is read-only and not available at design time.

Data Type

Binary String

SigningAlgorithm Property (IPWorksSMIME_SMIME Class)

This property includes a textual description of the signature hash algorithm.

Object Oriented Interface

public function getSigningAlgorithm();
public function setSigningAlgorithm($value);

Procedural Interface

ipworkssmime_smime_get($res, 130 );
ipworkssmime_smime_set($res, 130, $value );

Default Value

'SHA256'

Remarks

This property specifies the hash algorithm used to prepare the message digest for signature.

This property must contain either the name of the algorithm (such as MD5 or SHA1), or an object Id (OID) string representing the hash algorithm. Possible values are as follows:

• sha1
• md5
• sha-256 (default)
• sha-384
• sha-512
• sha-224

When read, the value of the property always contains the OID of the algorithm, or an empty string if the algorithm is unknown.

Data Type

String

UseOAEP Property (IPWorksSMIME_SMIME Class)

This property specifies whether or not to use Optimal Asymmetric Encryption Padding (OAEP).

Object Oriented Interface

public function getUseOAEP();
public function setUseOAEP($value);

Procedural Interface

ipworkssmime_smime_get($res, 131 );
ipworkssmime_smime_set($res, 131, $value );

Default Value

false

Remarks

This property specifies whether or not to use Optimal Asymmetric Encryption Padding (OAEP). By default, this value is False and the class will use PKCS1.

To specify nondefault OAEP options, please see OAEPRSAHashAlgorithm, OAEPMGF1HashAlgorithm, and OAEPParams

Data Type

Boolean

UsePSS Property (IPWorksSMIME_SMIME Class)

This property specifies whether or not RSA-PSS will be used during signing and verification.

Object Oriented Interface

public function getUsePSS();
public function setUsePSS($value);

Procedural Interface

ipworkssmime_smime_get($res, 132 );
ipworkssmime_smime_set($res, 132, $value );

Default Value

false

Remarks

This property specifies whether or not RSA-PSS will be used when signing and verifying messages. The default value is False.

Data Type

Boolean

AddRecipientCert Method (IPWorksSMIME_SMIME Class)

This method is used to add recipient certificates used to encrypt messages.

Object Oriented Interface

public function doAddRecipientCert($certencoded);

Procedural Interface

ipworkssmime_smime_do_addrecipientcert($res, $certencoded);

Remarks

This method is used to add recipient certificates to the internal MessageRecipients properties used to encrypt the Message. The recipient certificate must be a valid PKCS-encoded certificate. If the certificate provided is Base64 encoded, it will be decoded first by the object.

The CertMgr class may be used to retrieve the appropriate certificate from the system.

CheckMessageEncrypted Method (IPWorksSMIME_SMIME Class)

This method checks whether or not the current message is encrypted.

Object Oriented Interface

public function doCheckMessageEncrypted();

Procedural Interface

ipworkssmime_smime_do_checkmessageencrypted($res);

Remarks

This method is used to check whether or not the current message is encrypted. This method will return True, if the current message appears to be encrypted, according to the value of OutputMessageHeaders.

CheckMessageSigned Method (IPWorksSMIME_SMIME Class)

This method checks whether or not the current message is signed.

Object Oriented Interface

public function doCheckMessageSigned();

Procedural Interface

ipworkssmime_smime_do_checkmessagesigned($res);

Remarks

This method is used to check whether or not the current message is signed. This method will return True, if the current message appears to be signed, according to the value of OutputMessageHeaders.

Note: A message that is both signed and encrypted will not appear to be signed until after it is decrypted.

Config Method (IPWorksSMIME_SMIME Class)

Sets or retrieves a configuration setting.

Object Oriented Interface

public function doConfig($configurationstring);

Procedural Interface

ipworkssmime_smime_do_config($res, $configurationstring);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Decrypt Method (IPWorksSMIME_SMIME Class)

This method decrypts the current Message .

Object Oriented Interface

public function doDecrypt();

Procedural Interface

ipworkssmime_smime_do_decrypt($res);

Remarks

This method takes attempts to decrypt the encrypted message using the certificate in Certificate.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputMessage

When a valid source is found, the search stops. The order in which the output properties are checked is as follows:

• OutputFile
• OutputMessage: The output data is written to this property if no other destination is specified.

The headers of the input message (if any) will be read from InputMessageHeaders or InputMessageHeadersString.

The headers of the resulting message will be available in the OutputMessageHeaders and OutputMessageHeadersString properties.

DecryptAndVerifySignature Method (IPWorksSMIME_SMIME Class)

This method decrypts and verifies the signature of the current message.

Object Oriented Interface

public function doDecryptAndVerifySignature();

Procedural Interface

ipworkssmime_smime_do_decryptandverifysignature($res);

Remarks

This method attempts to both decrypt and verify the signature of the message. All of the properties affected by calling the Decrypt and VerifySignature methods are affected in the same manner.

Note: This function does not attempt to check the validity of the signing certificate.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputMessage

When a valid source is found, the search stops. The order in which the output properties are checked is as follows:

• OutputFile
• OutputMessage: The output data is written to this property if no other destination is specified.

The headers of the input message (if any) will be read from InputMessageHeaders or InputMessageHeadersString.

The headers of the resulting message will be available in the OutputMessageHeaders and OutputMessageHeadersString properties.

Encrypt Method (IPWorksSMIME_SMIME Class)

This method encrypts the message.

Object Oriented Interface

public function doEncrypt();

Procedural Interface

ipworkssmime_smime_do_encrypt($res);

Remarks

This method encrypts the data specified in InputFile or InputMessage in a PKCS-encoded envelope with all of the recipient certificates specified in the MessageRecipients properties.

The result of the encrypted data will be written to OutputFile, or OutputMessage. The OutputMessageHeaders property will be filled with the required S/MIME headers.

Note: The message headers, including the Sender, Recipient(s), and Subject, are not encrypted. If this is sensitive information, consider including these headers in the message body as a MIME entity and providing other headers for the S/MIME wrapper.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputMessage

When a valid source is found, the search stops. The order in which the output properties are checked is as follows:

• OutputFile
• OutputMessage: The output data is written to this property if no other destination is specified.

The headers of the input message (if any) will be read from InputMessageHeaders or InputMessageHeadersString.

The headers of the resulting message will be available in the OutputMessageHeaders and OutputMessageHeadersString properties.

GetRecipientInfo Method (IPWorksSMIME_SMIME Class)

This method gets the recipient information for an encrypted message.

Object Oriented Interface

public function doGetRecipientInfo();

Procedural Interface

ipworkssmime_smime_do_getrecipientinfo($res);

Remarks

This method will fire a RecipientInfo event for every recipient certificate for which the Message has been encrypted. The event will contain information about the Issuer and the SerialNumber for each recipient of the message.

GetSignerCertInfo Method (IPWorksSMIME_SMIME Class)

This method gets the signature information for an signed message.

Object Oriented Interface

public function doGetSignerCertInfo();

Procedural Interface

ipworkssmime_smime_do_getsignercertinfo($res);

Remarks

This method retrieves information about the certificate used to sign the message. This may be called before calling VerifySignature to determine which certificate should be loaded for verification.

When this method is called, the SignerCertInfo event fires once for each signer of the message. Use the parameters of the SignerCertInfo to determine which certificate to specify before calling VerifySignature.

Note: Use of this method is optional. If no certificate is specified before calling VerifySignature, the class will fire the SignerCertInfo and a certificate may be loaded from within the event at that time (if necessary).

Reset Method (IPWorksSMIME_SMIME Class)

This method resets the class properties.

Object Oriented Interface

public function doReset();

Procedural Interface

ipworkssmime_smime_do_reset($res);

Remarks

This method resets the values of all message and certificate properties. It is an easy way to reset the class properties before starting to populate with new values.

Sign Method (IPWorksSMIME_SMIME Class)

This method signs the current message.

Object Oriented Interface

public function doSign();

Procedural Interface

ipworkssmime_smime_do_sign($res);

Remarks

This method digitally signs the input data with the the certificate provided. Certificates are provided by specifying the Certificate property. The IncludeCertificate and DetachedSignature properties allow you to specify addition details about what to include when signing the message.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputMessage

When a valid source is found, the search stops. The order in which the output properties are checked is as follows:

• OutputFile
• OutputMessage: The output data is written to this property if no other destination is specified.

The headers of the input message (if any) will be read from InputMessageHeaders or InputMessageHeadersString.

The headers of the resulting message will be available in the OutputMessageHeaders and OutputMessageHeadersString properties.

SignAndEncrypt Method (IPWorksSMIME_SMIME Class)

This method signs and encrypts the current message.

Object Oriented Interface

public function doSignAndEncrypt();

Procedural Interface

ipworkssmime_smime_do_signandencrypt($res);

Remarks

This method both signs and encrypts the input message into a single PKCS-encoded envelope. The value in DetachedSignature is ignored: the class will always generate an attached signature when calling this method. All other properties used by calling the Sign and Encrypt methods are used in the same manner.

Note: The message headers, including the Sender, Recipient(s), and Subject, are not encrypted. If this is sensitive information, consider including these headers in the message body as a MIME entity and providing other headers for the S/MIME wrapper.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputMessage

When a valid source is found, the search stops. The order in which the output properties are checked is as follows:

• OutputFile
• OutputMessage: The output data is written to this property if no other destination is specified.

The headers of the input message (if any) will be read from InputMessageHeaders or InputMessageHeadersString.

The headers of the resulting message will be available in the OutputMessageHeaders and OutputMessageHeadersString properties.

VerifySignature Method (IPWorksSMIME_SMIME Class)

This method verifies the signature of the current message.

Object Oriented Interface

public function doVerifySignature();

Procedural Interface

ipworkssmime_smime_do_verifysignature($res);

Remarks

This method attempts to verify the signature of the input message. If the message does not have a certificate attached, the class will attempt to verify the signature using the certificate supplied in SignerCert (if any). If no certificate is found, the class fails with an error.

If this method is successful, the SignerCert property will contain the certificate information of the message signer.

Note: This function does not attempt to check the validity of the signing certificate.

Input and Output Properties

The class will determine the source and destination of the input and output based on which properties are set.

The order in which the input properties are checked is as follows:

• InputFile
• InputMessage

When a valid source is found, the search stops. The order in which the output properties are checked is as follows:

• OutputFile
• OutputMessage: The output data is written to this property if no other destination is specified.

The headers of the input message (if any) will be read from InputMessageHeaders or InputMessageHeadersString.

The headers of the resulting message will be available in the OutputMessageHeaders and OutputMessageHeadersString properties.

Error Event (IPWorksSMIME_SMIME Class)

Fired when information is available about errors during data delivery.

Object Oriented Interface

public function fireError($param);

Procedural Interface

ipworkssmime_smime_register_callback($res, 1, array($this, 'fireError'));

Parameter List

 'errorcode'
 'description'

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class fails with an error.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

RecipientInfo Event (IPWorksSMIME_SMIME Class)

This event is fired for each recipient certificate of the encrypted message.

Object Oriented Interface

public function fireRecipientInfo($param);

Procedural Interface

ipworkssmime_smime_register_callback($res, 2, array($this, 'fireRecipientInfo'));

Parameter List

 'issuer'
 'serialnumber'
 'subjectkeyidentifier'
 'encryptionalgorithm'

Remarks

When GetRecipientInfo is called on a valid encrypted message, this event will fire once for each recipient certificate that the message has been encrypted for. This may be used to identify the certificate to load.

Issuer is the subject of the issuer certificate.

SerialNumber is the serial number of the encryption certificate.

SubjectKeyIdentifier is the X.509 subjectKeyIdentifier extension value of the certificate used to sign the message encoded as a hex string.

EncryptionAlgorithm is the encryption algorithm used to encrypt the message. Possible values are as follows:

• "3DES"
• "DES"
• "RC2CBC40"
• "RC2CBC64"
• "RC2CBC128" or "RC2"
• "AESCBC128" or "AES"
• "AESCBC192"
• "AESCBC256"
• "AESGCM128" or "AESGCM"
• "AESGCM192"
• "AESGCM256"

SignerCertInfo Event (IPWorksSMIME_SMIME Class)

This event is fired during verification of the signed message.

Object Oriented Interface

public function fireSignerCertInfo($param);

Procedural Interface

ipworkssmime_smime_register_callback($res, 3, array($this, 'fireSignerCertInfo'));

Parameter List

 'issuer'
 'serialnumber'
 'subjectkeyidentifier'
 'certencoded'

Remarks

During verification, this event will be raised while parsing the signer's certificate information. The parameters that are populated depend on the options used when the message was originally signed. This information may be used to select the correct certificate for SignerCert to verify the signature. The following parameters may be populated:

Issuer specifies the subject of the issuer of the certificate used to sign the message.

SerialNumber is the serial number of the certificate used to sign the message.

SubjectKeyIdentifier is the X.509 subjectKeyIdentifier extension value of the certificate used to sign the message encoded as a hex string.

CertEncoded is the PEM (Base64 encoded) public certificate needed to verify the signature.

Note: When this value is present, the class will automatically use this value to perform signature verification.

The SignerCert property may be set from within this event. In this manner, the decision of which signer certificate to load may be delayed until the parameters of this event are inspected and the correct certificate can be located and loaded.

Config Settings (SMIME Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

SMIME Config Settings

Base Config Settings

Trappable Errors (SMIME Class)

SMIME Errors