Dns Configuration

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

DNS Configuration Settings

ConnectionMode:   Sets the connection mode for the DNS query.

This setting may be used to configure the connection mode (TCP or UDP) for the class.

The appropriate values are as follows:

0Auto connection mode. Try UDP first, retry with TCP automatically if needed.
1Always use UDP for queries (default setting).
2Always use TCP for queries. Note: the DNS server must support TCP queries or this will fail.

DNSProtocolLog:   Returns a 'nslookup' style log.

This setting may be used to obtain a 'nslookup' style log from the class. It must be enabled before calling Query and then queried after the operation completes. For instance:

DNS.Config("DNSProtocolLog=true");
DNS.Query("www.nsoftware.com");
string myLog = DNS.Config("DNSProtocolLog");
The default value is False and no log will be constructed.
DoHMethod:   Specifies the DNS over HTTPS method.

This setting may be used to configure the method used when performing DNS over HTTPS (DoH). Possible values are:

0 (default)HTTP POST (DNS Wireformat)
1HTTP GET (DNS Wireformat)
2HTTP GET (JSON)

This setting is only applicable when Protocol is set to ptHTTPS.

ResponseTruncated:   Whether the response is truncated.

This setting may be queried after calling Query to determine if the response from thet DNSServer is truncated. If the response is large and cannot be transferred over UDP the server may truncate the response. When this setting is True the response is truncated and the request should be attempted again over a different Protocol, such as ptTCP.

UseIDNs:   Whether to encode hostnames to internationalized domain names.

This setting specifies whether hostnames containing non-ASCII characters are encoded to internationalized domain names. When set to True if a hostname contains non-ASCII characters it is encoded using Punycode to an IDN.

The default value is False and the hostname will always be used exactly as specified.

UDPPort Configuration Settings

CaptureIPPacketInfo:   Used to capture the packet information.

If this is set to true, the component will capture the IP packet information.

The default value for this setting is False.

Note: This setting is only available in Windows.

DestinationAddress:   Used to get the destination address from the packet information.

If CaptureIPPacketInfo is set to true, then this will be populated with the packet's destination address when a packet is received. This information will be accessible in the DataIn event.

Note: This setting is only available in Windows.

DontFragment:   Used to set the Don't Fragment flag of outgoing packets.

When set to True, packets sent by the class will have the Don't Fragment flag set. The default value is False.

LocalHost:   The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

LocalPort:   The port in the local host where the class binds.

This must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This; setting is useful when trying to connect to services that require a trusted port in the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxPacketSize:   The maximum length of the packets that can be received.

This setting specifies the maximum size of the datagrams that the class will accept without truncation.

QOSDSCPValue:   Used to specify an arbitrary QOS/DSCP setting (optional).

UseConnection must be True to use this setting. This option allows you to specify an arbitrary DSCP value between 0 and 63. The default is 0. When set to the default value the component will not set a DSCP value.

Note: This setting uses the qWAVE API is only available on Windows 7, Windows Server 2008 R2, and later.

QOSTrafficType:   Used to specify QOS/DSCP settings (optional).

UseConnection must be True to use this setting. You may specify either the text or integer values: BestEffort (0), Background (1), ExcellentEffort (2), AudioVideo (3), Voice (4), and Control (5).

Note: This setting uses the qWAVE API which is only available on Windows Vista and Windows Server 2008 or above.

Note: QOSTrafficType must be set before setting Active to true.

ShareLocalPort:   If set to True, allows more than one instance of the class to be active on the same local port.

This option must be set before the class is activated through the Active property or it will have no effect.

The default value for this setting is False.

UseConnection:   Determines whether to use a connected socket.

UseConnection specifies whether the class should use a connected socket or not. The connection is defined as an association in between the local address/port and the remote address/port. As such, this is not a connection in the traditional TCP sense. What it means is only that the class will send and receive data only to and from the specified destination.

The default value for this setting is False.

UseIPv6:   Whether or not to use IPv6.

By default, the component expects an IPv4 address for local and remote host properties, and will create an IPv4 socket. To use IPv6 instead, set this to True.

Socket Configuration Settings

AbsoluteTimeout:   Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for UDP ports.

FirewallData:   Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g. headers for custom authentication schemes).

InBufferSize:   The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. Increasing the value of the InBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize:   The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. Increasing the value of the OutBufferSize setting can provide significant improvements in performance in some cases.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Configuration Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

GUIAvailable:   Tells the class whether or not a message loop is available for processing events.

In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The class will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.

In some non-GUI applications an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GUIAvailable to false will ensure that the class does not attempt to process external events.

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g. RuntimeLicense, License File).
  • License Type: The type of license installed (e.g. Royalty Free, Single Server).
UseDaemonThreads:   Whether threads created by the class are daemon threads.

If set to True (default), when the class creates a thread the thread's Daemon property will be explicitly set to True. When set to False the class will not set the Daemon property on the created thread. The default value is True.

UseInternalSecurityAPI:   Tells the class whether or not to use the system security libraries or an internal implementation.

By default the class will use the system security libraries to perform cryptographic functions. Setting this to True tells the class to use the internal implementation instead of using the system's security API.

Copyright (c) 2022 /n software inc. - All rights reserved.
IPWorks 2020 Java Edition - Version 20.0 [Build 8307]