LDAP Class

Properties   Methods   Events   Config Settings   Errors  

The Lightweight Directory Access Protocol (LDAP) Class is used to search, manage, and maintain internet directory servers.

Syntax

ipworks.LDAP

Remarks

The LDAP Class supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL-related settings are also supported through the Config method.

The LDAP Class implements a standard LDAP client as specified in RFC 1777, 2251, and other LDAP RFCs. Support for both LDAP v2 and v3 is provided.

The first step in using the class is specifying the ServerName, a DN (distinguished name) to bind as, and optionally a Password. Then you can call one or more of the class methods to act upon the server. Server responses normally are received through the Result event. The only exceptions are search requests that result in one or more SearchResult events, followed by a final SearchComplete event.

Attributes are set and returned through the Attributes collection. Other command arguments are specified through other properties. These are specified in detail in each method.

Search filters are to be specified as string arguments to the Search method. The format must be a standard LDAP search string as specified in RFC 1558. Other search attributes are set in properties, such as SearchScope, SearchTimeLimit, SearchSizeLimit, SearchReturnValues, and SearchDerefAliases.

The class operates synchronously by default (waits for a response before returning control to the caller); however, the class also may operate asynchronously (return control immediately), by setting Timeout to 0. Please refer to the Timeout property for more information.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

AcceptDataThis property indicates whether data reception is currently enabled.
AttributesThis property includes the attributes for the current entry.
AuthMechanismThis property is the authentication mechanism to be used when connecting to the Lightweight Directory Access Protocol (LDAP) server.
ConnectedThis property shows whether the class is connected.
DeleteOldRDNThis property controls whether the old RDN (Relative Distinguished Name) should be deleted.
DNThis property includes the distinguished name used as the base for Lightweight Directory Access Protocol (LDAP) operations.
FirewallA set of properties related to firewall access.
IdleThis property specifies the current status of the class.
LDAPVersionThe version of the Lightweight Directory Access Protocol (LDAP) used.
LocalHostThis property includes the name of the local host or user-assigned IP interface through which connections are initiated or accepted.
MessageIdThis property includes the message identifier for the next Lightweight Directory Access Protocol (LDAP) request.
PageSizeThis property includes the maximum number of results per page for the Search method.
PasswordThis property includes the password used to authenticate to the Lightweight Directory Access Protocol (LDAP) server.
ReferencesThis property includes a collection of references returned from the server.
ResultCodeThis property includes the result code returned in the last server response.
ResultDescriptionThis property includes the descriptive text returned in the last server response (if any).
ResultDNThis property includes the distinguished name returned in the last server response (if any).
SearchDerefAliasesThis property controls alias dereferencing during searching.
SearchReturnValuesThis property controls whether the search operation returns values of attributes or only types.
SearchScopeThis property controls the scope of Lightweight Directory Access Protocol (LDAP) search operations.
SearchSizeLimitThis property includes the maximum number of entries that can be returned by the next search operation.
SearchTimeLimitThis property includes a time limit for the next search operation (in seconds).
ServerNameThis property includes the name or address of the Lightweight Directory Access Protocol (LDAP) server.
ServerPortThis property includes the server port for the Lightweight Directory Access Protocol (LDAP) connection (the default is 389).
SortAttributesThis property includes a string of attribute names to sort on with optional relative matching rules.
SSLAcceptServerCertThis property instructs the class to unconditionally accept the server certificate that matches the supplied certificate.
SSLCertThis property includes the certificate to be used during Secure Sockets Layer (SSL) negotiation.
SSLEnabledThis property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.
SSLProviderThis property specifies the Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.
SSLServerCertThis property includes the server certificate for the last established connection.
SSLStartModeThis property determines how the class starts the Secure Sockets Layer (SSL) negotiation.
TimeoutThis property includes the timeout for the class.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

AbandonThis method asks the server to abandon a request.
AddThis method adds an entry specified by DN to the directory server using the type and value attributes defined in the Attributes properties.
AttrThis method returns the value of the specified Lightweight Directory Access Protocol (LDAP) attribute.
BindThis method connects and binds to the directory server.
ChangePasswordThis method changes the password for the specified user.
CompareThis method compares attributes and values with those of the entry specified by DN .
ConfigSets or retrieves a configuration setting.
ConnectThis method connects to the remote host without performing any action.
DeleteDeletes an entry specified by DN from the directory server.
DoEventsThis method processes events from the internal message queue.
ExtendedRequestThis method performs a Lightweight Directory Access Protocol (LDAP) V3 extended operation.
InterruptThis method interrupts the current method.
ListComputersThis method lists all computers in the directory.
ListGroupMembersThis method lists all members of a group.
ListGroupsThis method list all groups in the directory.
ListUserGroupsThis method lists all groups a user is a part of.
ModifyThis method performs a Lightweight Directory Access Protocol (LDAP) modify operation on the entry specified by DN .
ModifyRDNThis method performs a Lightweight Directory Access Protocol (LDAP) modify RDN operation on an entry specified by DN .
MoveToDNThis method performs a Lightweight Directory Access Protocol (LDAP) modify operation on the entry specified by DN by changing its superior.
PauseDataThis method pauses data reception.
ProcessDataThis method re-enables data reception after a call to PauseData .
ResetThis method will reset the class.
SearchThis method searches the directory server using the base object specified in DN and the search filter SearchFilter .
UnbindThis method unbinds from the directory server.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

ComputerListThis event is fired for each computer entry returned.
ConnectedThis event is fired immediately after a connection completes (or fails).
ConnectionStatusThis event is fired to indicate changes in the connection state.
DisconnectedThis event is fired when a connection is closed.
ErrorFired when information is available about errors during data delivery.
ExtendedResponseThis event is fired for Lightweight Directory Access Protocol (LDAP) V3 extended responses.
GroupListThis event is fired for each group entry returned.
PITrailThis event provides detailed information about the interaction with the server.
ResultThis event is fired for every server response, except for search responses.
SearchCompleteThis event is fired upon completion of a search operation.
SearchPageThis event is fired for every page returned from a search operation.
SearchResultThis event is fired for every entry returned from a search operation.
SearchResultReferenceThis event is fired for every result reference returned from a search operation.
SSLServerAuthenticationFired after the server presents its certificate to the client.
SSLStatusFired when secure connection progress messages are available.
UserListThis event is fired once for each user entry returned.

Config Settings


The following is a list of config settings for the class with short descriptions. Click on the links for further details.

DomainControllerReturns the name of the domain controller.
FriendlyGUIDWhether to return GUID attribute values in a human readable format.
FriendlySIDWhether to return SID attribute values in a human readable format.
MaxAttributesInstructs class to save the amount of attributes specified that are returned by the server.
RequestControlsControls to include in the request.
ResponseControlsControls present in the response.
UseDefaultDCWhether to connect to the default Domain Controller when calling Bind.
CloseStreamAfterTransferIf true, the class will close the upload or download stream after the transfer.
ConnectionTimeoutSets a separate timeout value for establishing a connection.
FirewallAutoDetectTells the class whether or not to automatically detect and use firewall system settings, if available.
FirewallHostName or IP address of firewall (optional).
FirewallListenerIf true, the class binds to a SOCKS firewall as a server (TCPClient only).
FirewallPasswordPassword to be used if authentication is to be used when connecting through the firewall.
FirewallPortThe TCP port for the FirewallHost;.
FirewallTypeDetermines the type of firewall to connect through.
FirewallUserA user name if authentication is to be used connecting through a firewall.
KeepAliveIntervalThe retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.
KeepAliveTimeThe inactivity time in milliseconds before a TCP keep-alive packet is sent.
LingerWhen set to True, connections are terminated gracefully.
LingerTimeTime in seconds to have the connection linger.
LocalHostThe name of the local host through which connections are initiated or accepted.
LocalPortThe port in the local host where the class binds.
MaxLineLengthThe maximum amount of data to accumulate when no EOL is found.
MaxTransferRateThe transfer rate limit in bytes per second.
ProxyExceptionsListA semicolon separated list of hosts and IPs to bypass when using a proxy.
TCPKeepAliveDetermines whether or not the keep alive socket option is enabled.
TcpNoDelayWhether or not to delay when sending packets.
UseIPv6Whether to use IPv6.
UseNTLMv2Whether to use NTLM V2.
LogSSLPacketsControls whether SSL packets are logged when using the internal security API.
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCACertsA newline separated list of CA certificate to be included when performing an SSL handshake.
SSLCheckCRLWhether to check the Certificate Revocation List for the server certificate.
SSLCheckOCSPWhether to use OCSP to check the status of the server certificate.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLClientCACertsA newline separated list of CA certificates to use during SSL client certificate validation.
SSLContextProtocolThe protocol used when getting an SSLContext instance.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLEnableRenegotiationWhether the renegotiation_info SSL extension is supported.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLKeyLogFileThe location of a file where per-session secrets are written for debugging purposes.
SSLNegotiatedCipherReturns the negotiated cipher suite.
SSLNegotiatedCipherStrengthReturns the negotiated cipher suite strength.
SSLNegotiatedCipherSuiteReturns the negotiated cipher suite.
SSLNegotiatedKeyExchangeReturns the negotiated key exchange algorithm.
SSLNegotiatedKeyExchangeStrengthReturns the negotiated key exchange algorithm strength.
SSLNegotiatedVersionReturns the negotiated protocol version.
SSLServerCACertsA newline separated list of CA certificates to use during SSL server certificate validation.
SSLTrustManagerFactoryAlgorithmThe algorithm to be used to create a TrustManager through TrustManagerFactory.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
FirewallDataUsed to send extra data to the firewall.
InBufferSizeThe size in bytes of the incoming queue of the socket.
OutBufferSizeThe size in bytes of the outgoing queue of the socket.
BuildInfoInformation about the product's build.
GUIAvailableWhether or not a message loop is available for processing events.
LicenseInfoInformation about the current license.
MaskSensitiveDataWhether sensitive data is masked in log messages.
UseDaemonThreadsWhether threads created by the class are daemon threads.
UseInternalSecurityAPIWhether or not to use the system security libraries or an internal implementation.

AcceptData Property (LDAP Class)

This property indicates whether data reception is currently enabled.

Syntax


public boolean isAcceptData();


Default Value

True

Remarks

This property indicates whether data reception is currently enabled. When false, data reception is disabled. Use the PauseData and ProcessData methods to pause and resume data reception.

This property is read-only and not available at design time.

Attributes Property (LDAP Class)

This property includes the attributes for the current entry.

Syntax


public LDAPAttributeList getAttributes();


public void setAttributes(LDAPAttributeList attributes);

Remarks

This property contains a collection of all of the attributes for the current entry. Each attribute's details are found in the fields of the LDAPAttribute type.

After a Search, this property will be populated with the attributes of each search result and can be read within the SearchResult event (one event for each resulting DN).

During a Lightweight Directory Access Protocol (LDAP) Modify operation, this property describes the modifications that are to be made to the attributes. You may specify the attribute, the new value, and the operation to be executed by the server in this property.

This collection is indexed from 0 to size -1.

This property is not available at design time.

Please refer to the LDAPAttribute type for a complete list of fields.

AuthMechanism Property (LDAP Class)

This property is the authentication mechanism to be used when connecting to the Lightweight Directory Access Protocol (LDAP) server.

Syntax


public int getAuthMechanism();


public void setAuthMechanism(int authMechanism);


Enumerated values:
  public final static int lamSimple = 0;
  public final static int lamDigestMD5 = 1;
  public final static int lamNegotiate = 2;
  public final static int lamKerberos = 6;
  public final static int lamSASLExternal = 7;

Default Value

0

Remarks

This property specifies the authentication mechanism used. Possible values are as follows:

0 (lamSimple - default) Plaintext authentication
1 (lamDigestMD5) DIGEST-MD5 authentication
2 (lamNegotiate) NTLM/Negotiate authentication
6 (lamKerberos) Kerberos authentication
7 (lamSASLExternal) SASL EXTERNAL authentication

Connected Property (LDAP Class)

This property shows whether the class is connected.

Syntax


public boolean isConnected();


Default Value

False

Remarks

This property is used to determine whether or not the class is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.

This property is read-only and not available at design time.

DeleteOldRDN Property (LDAP Class)

This property controls whether the old RDN (Relative Distinguished Name) should be deleted.

Syntax


public boolean isDeleteOldRDN();


public void setDeleteOldRDN(boolean deleteOldRDN);

Default Value

True

Remarks

This property controls whether the old RDN should be deleted. It is used when ModifyRDN is called. The default value is True, which instructs the server to delete the old RDN.

This property is not available at design time.

DN Property (LDAP Class)

This property includes the distinguished name used as the base for Lightweight Directory Access Protocol (LDAP) operations.

Syntax


public String getDN();


public void setDN(String DN);

Default Value

""

Remarks

This also includes the base object during LDAP searches.

The distinguished name is provided in string format, as specified by RFC 1779. Example. Setting DN:

LDAPControl.DN = "uid=TThompson,ou=Employees,dc=server" LDAPControl.DN = "Domain\Username"

Firewall Property (LDAP Class)

A set of properties related to firewall access.

Syntax


public Firewall getFirewall();


public void setFirewall(Firewall firewall);

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the class will attempt to connect.

Please refer to the Firewall type for a complete list of fields.

Idle Property (LDAP Class)

This property specifies the current status of the class.

Syntax


public boolean isIdle();


Default Value

True

Remarks

Idle will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.

This property is read-only.

LDAPVersion Property (LDAP Class)

The version of the Lightweight Directory Access Protocol (LDAP) used.

Syntax


public int getLDAPVersion();


public void setLDAPVersion(int LDAPVersion);

Default Value

3

Remarks

This property contains the version of LDAP used. The default value is 3 (for LDAPv3).

This property is not available at design time.

LocalHost Property (LDAP Class)

This property includes the name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax


public String getLocalHost();


public void setLocalHost(String localHost);

Default Value

""

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

MessageId Property (LDAP Class)

This property includes the message identifier for the next Lightweight Directory Access Protocol (LDAP) request.

Syntax


public int getMessageId();


public void setMessageId(int messageId);

Default Value

1

Remarks

This property contains the message identifier for the next LDAP request. If a custom value is needed, this property must be set before calling any other methods. The class increments this property automatically after each request.

This property is not available at design time.

PageSize Property (LDAP Class)

This property includes the maximum number of results per page for the Search method.

Syntax


public int getPageSize();


public void setPageSize(int pageSize);

Default Value

0

Remarks

This property contains the maximum number of results per page for the Search method. The default value is 0 (no paging). If set to a value greater than zero, results will be paged, that is, returned in blocks of maximum PageSize results.

For each page sent by the server, a SearchPage event will fire. You may decide to cancel or continue displaying results from within this event.

Note: Lightweight Directory Access Protocol (LDAP) paging functionality is described by LDAP extension RFCs and may or may not be implemented by the LDAP server being accessed.

Password Property (LDAP Class)

This property includes the password used to authenticate to the Lightweight Directory Access Protocol (LDAP) server.

Syntax


public String getPassword();


public void setPassword(String password);

Default Value

""

Remarks

This property contains the password used to authenticate to the LDAP server. Leave this value empty if no password is required.

This property is not available at design time.

References Property (LDAP Class)

This property includes a collection of references returned from the server.

Syntax


public LDAPReferenceList getReferences();


Remarks

This property contains a collection of references returned from the server. References will be SearchResult references if inside a SearchResult or SearchResultReference event. In this case, they represent URLs to contact to continue the search. References will be regular result references if inside the Result event or SearchComplete event. In this case, they represent the URLs to contact to complete the requested operation.

This collection is indexed from 0 to size -1.

This property is read-only and not available at design time.

Please refer to the LDAPReference type for a complete list of fields.

ResultCode Property (LDAP Class)

This property includes the result code returned in the last server response.

Syntax


public int getResultCode();


Default Value

0

Remarks

This property contains the result code returned in the last server response. This is identical to the corresponding parameter provided by the last Result, SearchResult, or SearchComplete event.

Possible result codes are as follows:

0 success
1 operationsError
2 protocolError
3 timeLimitExceeded
4 sizeLimitExceeded
5 compareFalse
6 compareTrue
7 authMethodNotSupported
8 strongAuthRequired
9 reserved
10 referral
11 adminLimitExceeded
12 unavailableCriticalExtension
13 confidentialityRequired
14 saslBindInProgress
16 noSuchAttribute
17 undefinedAttributeType
18 inappropriateMatching
19 constraintViolation
20 attributeOrValueExists
21 invalidAttributeSyntax
32 noSuchObject
33 aliasProblem
34 invalidDNSyntax
35 reserved for undefined isLeaf
36 aliasDereferencingProblem
48 inappropriateAuthentication
49 invalidCredentials
50 insufficientAccessRights
51 busy
52 unavailable
53 unwillingToPerform
54 loopDetect
64 namingViolation
65 objectClassViolation
66 notAllowedOnNonLeaf
67 notAllowedOnRDN
68 entryAlreadyExists
69 objectClassModsProhibited
70 reserved for CLDAP
71 affectsMultipleDSAs

All the result codes with the exception of success, compareFalse and compareTrue are to be treated as meaning the operation could not be completed in its entirety. Result codes from 16 to 21 indicate an AttributeProblem; codes 32, 33, 34, and 36 indicate a NameProblem; codes 48, 49, and 50 indicate a SecurityProblem; codes 51 to 54 indicate a ServiceProblem; and codes 64 to 69 and 71 indicate an UpdateProblem.

This property is read-only.

ResultDescription Property (LDAP Class)

This property includes the descriptive text returned in the last server response (if any).

Syntax


public String getResultDescription();


Default Value

""

Remarks

This property contains the descriptive text returned in the last server response (if any). This is identical to the corresponding parameter provided by the last Result, SearchResult, or SearchComplete event.

This property is read-only.

ResultDN Property (LDAP Class)

This property includes the distinguished name returned in the last server response (if any).

Syntax


public String getResultDN();


Default Value

""

Remarks

This property contains the distinguished name returned in the last server response (if any). This is identical to the corresponding parameter provided by the last Result or SearchComplete event.

This property is read-only.

SearchDerefAliases Property (LDAP Class)

This property controls alias dereferencing during searching.

Syntax


public int getSearchDerefAliases();


public void setSearchDerefAliases(int searchDerefAliases);


Enumerated values:
  public final static int sdaNever = 0;
  public final static int sdaInSearching = 1;
  public final static int sdaFindingBaseObject = 2;
  public final static int sdaAlways = 3;

Default Value

0

Remarks

This property controls the alias dereferencing during searching. The possible values are as follows:

sdaNever (0) Do not dereference aliases in searching or in locating the base object of the search.
sdaInSearching (1) Dereference aliases in subordinates of the base object in searching, but not in locating the base object of the search.
sdaFindingBaseObject (2) Dereference aliases in locating the base object of the search, but not when searching subordinates of the base object.
sdaAlways (3) Dereference aliases both in searching and in locating the base object of the search.

The default is to never dereference aliases.

SearchReturnValues Property (LDAP Class)

This property controls whether the search operation returns values of attributes or only types.

Syntax


public boolean isSearchReturnValues();


public void setSearchReturnValues(boolean searchReturnValues);

Default Value

True

Remarks

This property controls whether the search operation returns values of attributes or only types. If only attributes are needed, disabling the property to return values will enhance performance.

SearchScope Property (LDAP Class)

This property controls the scope of Lightweight Directory Access Protocol (LDAP) search operations.

Syntax


public int getSearchScope();


public void setSearchScope(int searchScope);


Enumerated values:
  public final static int ssBaseObject = 0;
  public final static int ssSingleLevel = 1;
  public final static int ssWholeSubtree = 2;

Default Value

2

Remarks

This property controls the scope of LDAP search operations. Possible values are as follows:

ssBaseObject (0) Search only the base object.
ssSingleLevel (1) Search only one level, including objects directly below the base object, but not the base object.
ssWholeSubtree (2) Search the whole subtree, including the base object.

The default is to search the whole subtree.

SearchSizeLimit Property (LDAP Class)

This property includes the maximum number of entries that can be returned by the next search operation.

Syntax


public int getSearchSizeLimit();


public void setSearchSizeLimit(int searchSizeLimit);

Default Value

0

Remarks

This property contains the maximum number of entries that can be returned by the next search operation. This limit is provided as a hint to the directory server. A value of 0 means that no size limits are in effect for the search.

SearchTimeLimit Property (LDAP Class)

This property includes a time limit for the next search operation (in seconds).

Syntax


public int getSearchTimeLimit();


public void setSearchTimeLimit(int searchTimeLimit);

Default Value

0

Remarks

This property contains a time limit for the next search operation (in seconds). This limit is provided as a hint to the directory server. A value of 0 means that no time limits are in effect for the search.

ServerName Property (LDAP Class)

This property includes the name or address of the Lightweight Directory Access Protocol (LDAP) server.

Syntax


public String getServerName();


public void setServerName(String serverName);

Default Value

""

Remarks

This property specifies the IP address (IP number in dotted internet format) or the domain name of the directory server. It is set before a connection is attempted and cannot be changed once a connection is in progress.

If this property is set to a domain name, a DNS request is initiated, and upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, an error is returned.

ServerPort Property (LDAP Class)

This property includes the server port for the Lightweight Directory Access Protocol (LDAP) connection (the default is 389).

Syntax


public int getServerPort();


public void setServerPort(int serverPort);

Default Value

389

Remarks

This property contains the server port for the LDAP connection (the default is 389).

For the implicit Secure Sockets Layer (SSL), use port 636 (please refer to the SSLStartMode property for more information).

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

This property is not available at design time.

SortAttributes Property (LDAP Class)

This property includes a string of attribute names to sort on with optional relative matching rules.

Syntax


public String getSortAttributes();


public void setSortAttributes(String sortAttributes);

Default Value

""

Remarks

This property contains a string of attribute names to sort on with optional relative matching rules. When set before a Search, entries returned by the server will be sorted according to SortAttributes. The format consists of one or more attribute names separated by spaces. Each attribute may be followed by an optional matching rule.

If matching rules are defined, they should be separated from the attribute names with a "/".

Normally, the values are returned in ascending order. If descending (reverse) order of sorting is desired, the attribute type must be preceded with a "-".

Following are examples:

LDAPControl.SortAttributes = "loginTime" LDAPControl.SortAttributes = "name/caseIgnoreSubstringsMatch age/numericStringSubstringsMatch" LDAPControl.SortAttributes = "cn age/1.3.6.1.4.1.1466.115.121.1.27" LDAPControl.SortAttributes = "-cn age/1.3.6.1.4.1.1466.115.121.1.27" Example 1. Matching Rules for Equality Filters:

1.3.6.1.4.1.1466.115.121.1.38objectIdentifierMatch
1.3.6.1.4.1.1466.115.121.1.12distinguishedNameMatch
1.3.6.1.4.1.1466.115.121.1.15caseIgnoreMatch
1.3.6.1.4.1.1466.115.121.1.36numericStringMatch
1.3.6.1.4.1.1466.115.121.1.41caseIgnoreListMatch
1.3.6.1.4.1.1466.115.121.1.27integerMatch
1.3.6.1.4.1.1466.115.121.1.6bitStringMatch
1.3.6.1.4.1.1466.115.121.1.50telephoneNumberMatch
1.3.6.1.4.1.1466.115.121.1.43presentationAddressMatch
1.3.6.1.4.1.1466.115.121.1.34uniqueMemberMatch
1.3.6.1.4.1.1466.115.121.1.42protocolInformationMatch
1.3.6.1.4.1.1466.115.121.1.24generalizedTimeMatch
1.3.6.1.4.1.1466.115.121.1.26caseExactIA5Match
1.3.6.1.4.1.1466.115.121.1.26caseIgnoreIA5Match
Example 2. Matching Rules for Inequality Filters:
1.3.6.1.4.1.1466.115.121.1.24 generalizedTimeOrderingMatch
1.3.6.1.4.1.1466.115.121.1.15 caseIgnoreOrderingMatch
Example 3. Matching Rules for Substring Filters:
1.3.6.1.4.1.1466.115.121.1.58 caseIgnoreSubstringsMatch
1.3.6.1.4.1.1466.115.121.1.58 telephoneNumberSubstringsMatch
1.3.6.1.4.1.1466.115.121.1.58 numericStringSubstringsMatch
Example 4. Matching Rules for Subschema Attributes:
1.3.6.1.4.1.1466.115.121.1.27integerFirstComponentMatch
1.3.6.1.4.1.1466.115.121.1.38objectIdentifierFirstComponentMatch

SSLAcceptServerCert Property (LDAP Class)

This property instructs the class to unconditionally accept the server certificate that matches the supplied certificate.

Syntax


public Certificate getSSLAcceptServerCert();


public void setSSLAcceptServerCert(Certificate SSLAcceptServerCert);

Remarks

If it finds any issues with the certificate presented by the server, the class will normally terminate the connection with an error.

You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

Note: This functionality is provided only for cases in which you otherwise know that you are communicating with the right server. If used improperly, this property may create a security breach. Use it at your own risk.

Please refer to the Certificate type for a complete list of fields.

SSLCert Property (LDAP Class)

This property includes the certificate to be used during Secure Sockets Layer (SSL) negotiation.

Syntax


public Certificate getSSLCert();


public void setSSLCert(Certificate SSLCert);

Remarks

This property includes the digital certificate that the class will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the Encoded field to the encoded certificate. To select a certificate, use the store and subject fields.

Please refer to the Certificate type for a complete list of fields.

SSLEnabled Property (LDAP Class)

This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.

Syntax


public boolean isSSLEnabled();


public void setSSLEnabled(boolean SSLEnabled);

Default Value

False

Remarks

This property specifies whether TLS/SSL is enabled in the class. When False (default), the class operates in plaintext mode. When True, TLS/SSL is enabled.

TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.

This property is not available at design time.

SSLProvider Property (LDAP Class)

This property specifies the Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax


public int getSSLProvider();


public void setSSLProvider(int SSLProvider);


Enumerated values:
  public final static int sslpAutomatic = 0;
  public final static int sslpPlatform = 1;
  public final static int sslpInternal = 2;

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

0 (sslpAutomatic - default)Automatically selects the appropriate implementation.
1 (sslpPlatform) Uses the platform/system implementation.
2 (sslpInternal) Uses the internal implementation.
Additional Notes

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

SSLServerCert Property (LDAP Class)

This property includes the server certificate for the last established connection.

Syntax


public Certificate getSSLServerCert();


Remarks

SSLServerCert contains the server certificate for the last established connection.

SSLServerCert is reset every time a new connection is attempted.

This property is read-only.

Please refer to the Certificate type for a complete list of fields.

SSLStartMode Property (LDAP Class)

This property determines how the class starts the Secure Sockets Layer (SSL) negotiation.

Syntax


public int getSSLStartMode();


public void setSSLStartMode(int SSLStartMode);


Enumerated values:
  public final static int sslAutomatic = 0;
  public final static int sslImplicit = 1;
  public final static int sslExplicit = 2;
  public final static int sslNone = 3;

Default Value

3

Remarks

The SSLStartMode property may have one of the following values:

0 (sslAutomatic)If the remote port is set to the standard plaintext port of the protocol (where applicable), the class will behave the same as if SSLStartMode is set to sslExplicit. In all other cases, SSL negotiation will be implicit (sslImplicit).
1 (sslImplicit)The SSL negotiation will start immediately after the connection is established.
2 (sslExplicit)The class will first connect in plaintext, and then will explicitly start SSL negotiation through a protocol command such as STARTTLS.
3 (sslNone - default)No SSL negotiation; no SSL security. All communication will be in plaintext mode.

Timeout Property (LDAP Class)

This property includes the timeout for the class.

Syntax


public int getTimeout();


public void setTimeout(int timeout);

Default Value

60

Remarks

If the Timeout property is set to 0, all operations return immediately, potentially failing with a WOULDBLOCK error if data cannot be sent immediately.

If Timeout is set to a positive value, data is sent in a blocking manner and the class will wait for the operation to complete before returning control. The class will handle any potential WOULDBLOCK errors internally and automatically retry the operation for a maximum of Timeout seconds.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the class throws an exception.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Abandon Method (LDAP Class)

This method asks the server to abandon a request.

Syntax

public void abandon(int messageId);

Remarks

This method asks the server to abandon the request specified by MessageId. The result of the operation is returned through the Result event.

Add Method (LDAP Class)

This method adds an entry specified by DN to the directory server using the type and value attributes defined in the Attributes properties.

Syntax

public void add();

Remarks

This method adds the entry specified by DN to the directory. All entries are required to have an objectClass attribute.

To add a new entry, first Bind with credentials that will allow you to perform the new addition. To add attributes instead of entries, use the Modify method instead. When specifying multivalued attributes, specify the attribute type only in the first occurrence of that attribute type in the Attributes collection. Additional instances of the same attribute type should specify an attribute type of an empty string.

The result of the operation is returned through the Result event.

Example. Add a New Entry (including the multivalued objectClass attribute):

LDAPControl.DN = "uid=NewUser,ou=Employees,dc=server" LDAPControl.Attributes.Add(new LDAPAttribute("objectClass", "top")) LDAPControl.Attributes.Add(new LDAPAttribute("", "person")) LDAPControl.Attributes.Add(new LDAPAttribute("", "organizationalPerson")) LDAPControl.Attributes.Add(new LDAPAttribute("", "inetorgperson")) LDAPControl.Attributes.Add(new LDAPAttribute("sn", "UserName")) LDAPControl.Attributes.Add(new LDAPAttribute("cn", "New S. UserName")) LDAPControl.Attributes.Add(new LDAPAttribute("uid", "NewUser")) LDAPControl.Add()

Attr Method (LDAP Class)

This method returns the value of the specified Lightweight Directory Access Protocol (LDAP) attribute.

Syntax

public String attr(String attrType);

Remarks

This method returns the value of the specified LDAP attribute. If the attribute does not exist, an empty string is returned.

Please refer to the Attributes collection for more information.

Bind Method (LDAP Class)

This method connects and binds to the directory server.

Syntax

public void bind();

Remarks

This method connects and binds to the directory server. If the Password property has a value, it is used for authentication. If not, the bind is performed anonymously. Binding is often required on some directory servers, like Active Directory. The result of the operation is returned through the Result event.

Example. Binding:

LDAPControl.DN = "uid=TThompson,ou=Employees,dc=server" LDAPControl.Password = "mypassword" LDAPControl.Bind() LDAPControl.DN = "Domain/Username" LDAPControl.Password = "mypassword" LDAPControl.Bind()

ChangePassword Method (LDAP Class)

This method changes the password for the specified user.

Syntax

public void changePassword(String user, String oldPassword, String newPassword);

Remarks

This method changes the password for the specified user.

The User parameter is the name of the user for which the password will be changed. OldPassword specifies the current password and NewPassword specifies the new password.

Note: This operation can be performed only over the Secure Sockets Layer (SSL) port. Set ServerPort to the SSL port of the server (typically 636) before calling this method.

Note: If the user is an administrator, the old password is not required.

Compare Method (LDAP Class)

This method compares attributes and values with those of the entry specified by DN .

Syntax

public void compare();

Remarks

This method compares attribute types and values specified via the Attributes collection, with the values in the directory for the entry specified by DN. The result of the operation is returned through the Result event.

Config Method (LDAP Class)

Sets or retrieves a configuration setting.

Syntax

public String config(String configurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (LDAP Class)

This method connects to the remote host without performing any action.

Syntax

public void connect();

Remarks

This method establishes a connection with the remote host specified by URL, but it does not send a request. In most cases, it is recommended to use the appropriate method, such as Get or Post, which will both establish a connection and send a request.

This method may be useful in cases in which it is desirable to establish a connection without performing any operation (e.g., when testing connectivity).

Delete Method (LDAP Class)

Deletes an entry specified by DN from the directory server.

Syntax

public void delete();

Remarks

This method deletes the entry specified by DN from the directory. The result of the operation is returned through the Result event.

DoEvents Method (LDAP Class)

This method processes events from the internal message queue.

Syntax

public void doEvents();

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

ExtendedRequest Method (LDAP Class)

This method performs a Lightweight Directory Access Protocol (LDAP) V3 extended operation.

Syntax

public void extendedRequest(String requestName, byte[] requestValue);

Remarks

This method performs an LDAP V3 extended operation. RequestName must contain the object identifier of the operation, and RequestValue may contain an optional value.

Interrupt Method (LDAP Class)

This method interrupts the current method.

Syntax

public void interrupt();

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ListComputers Method (LDAP Class)

This method lists all computers in the directory.

Syntax

public void listComputers();

Remarks

This method lists all computers in the directory. The ComputerList event will be fired once for each computer returned.

ListGroupMembers Method (LDAP Class)

This method lists all members of a group.

Syntax

public void listGroupMembers(String group);

Remarks

This method lists all members of the specified group. The UserList event will be fired once for each member returned.

ListGroups Method (LDAP Class)

This method list all groups in the directory.

Syntax

public void listGroups();

Remarks

This method lists all groups in the directory. The GroupList event will be fired once for each group returned.

ListUserGroups Method (LDAP Class)

This method lists all groups a user is a part of.

Syntax

public void listUserGroups(String user);

Remarks

This method lists all groups that the user specified by user is a part of. The GroupList event will fire once for each group the user is a part of.

Modify Method (LDAP Class)

This method performs a Lightweight Directory Access Protocol (LDAP) modify operation on the entry specified by DN .

Syntax

public void modify();

Remarks

This method performs an LDAP modify operation on the entry specified by DN. The attributes to modify should be set via the Attributes collection. When specifying multivalued attributes, specify the attribute type only in the first occurrence of that attribute type in the Attributes collection. Additional instances of the same attribute type should specify an attribute type of an empty string.

The modification can be a replacement, an addition, or a deletion, depending on the ModOp field of the attribute;. The result of the operation is returned through the Result event.

Example. Modify an Entry (Replace an Attribute Value):

LDAPControl.DN = "uid=TThompson,ou=Employees,dc=server" LDAPControl.Attributes.Add(New LDAPAttribute("url", "www.url1.net", LDAPAttributeModOps.amoReplace)) LDAPControl.Attributes.Add(New LDAPAttribute("", "www.url2.net", LDAPAttributeModOps.amoReplace)) LDAPControl.Modify()

ModifyRDN Method (LDAP Class)

This method performs a Lightweight Directory Access Protocol (LDAP) modify RDN operation on an entry specified by DN .

Syntax

public void modifyRDN(String newRDN);

Remarks

This method performs an LDAP modify RDN operation on the entry specified by DN.

NewRDN is the new RDN for the entry specified by DN

The result of the operation is returned through the Result event.

MoveToDN Method (LDAP Class)

This method performs a Lightweight Directory Access Protocol (LDAP) modify operation on the entry specified by DN by changing its superior.

Syntax

public void moveToDN(String newSuperior);

Remarks

This method performs an LDAP modify operation on the entry specified by DN by changing its superior.

Note: None of the entry's attributes will change. DeleteOldRDN property will be set to True to delete the old entry. The result of the operation is returned through the Result event.

PauseData Method (LDAP Class)

This method pauses data reception.

Syntax

public void pauseData();

Remarks

This method pauses data reception when called. While data reception is paused, incoming data will not be processed and events will not fire. Call ProcessData to re-enable data reception.

ProcessData Method (LDAP Class)

This method re-enables data reception after a call to PauseData .

Syntax

public void processData();

Remarks

This method re-enables data reception after a previous call to PauseData. Call this method to re-enable data reception and allow IPPacket to fire.

Note: This method is used only after previously calling PauseData. It does not need to be called to process data by default.

Reset Method (LDAP Class)

This method will reset the class.

Syntax

public void reset();

Remarks

This method will reset the class's properties to their default values.

Search Method (LDAP Class)

This method searches the directory server using the base object specified in DN and the search filter SearchFilter .

Syntax

public void search(String searchFilter);

Remarks

This method searches the directory server using the base object specified in the DN and the search filter specified in the SearchFilter parameter. Additional search parameters are specified through the SearchScope, SearchDerefAliases, SearchSizeLimit, SearchTimeLimit, and SearchReturnValues properties.

If Attributes are specified before starting a search, the server will return only those results that contain a value for the specified attributes.

Results are returned through zero or more SearchResult events, after which a SearchComplete event is fired.

Example 1. Searching for a User:

LDAPControl.DN = "ou=Employees,dc=server" LDAPControl.Search("uid=TThompson")

A Directory-Specific Entries (DSE) search will search for the attributes of the server. Example 2. DSE Search:

LDAPControl.DN = "" LDAPControl.SearchScope = 0 LDAPControl.Search("objectClass=*")

SearchFilter is a string representation of the Lightweight Directory Access Protocol (LDAP) search filter used for the search.

The format of the search filter is specified by RFC 1558 and is identical to the format used by most LDAP applications.

The following are examples of search filters, as provided in the RFC:

Example 3. Search Filters:

     (cn=Babs Jensen)
     (!(cn=Tim Howes))
     (&(objectClass=Person)(|(sn=Jensen)(cn=Babs J*)))
     (o=univ*of*mich*)

The complete specification is given by the following BNF:

     <filter> ::= "(" <filtercomp> ")"
     <filtercomp> ::= <and> | <or> | <not> | <item>
     <and> ::= "&" <filterlist>
     <or> ::= "|" <filterlist>
     <not> ::= "!" <filter>
     <filterlist> ::= <filter> | <filter> <filterlist>
     <item> ::= <simple> | <present> | <substring>
     <simple> ::= <attr> <filtertype> <value>
     <filtertype> ::= <equal> | <approx> | <greater> | <less>
     <equal> ::= "="
     <approx> ::= "~="
     <greater> ::= ">="
     <less> ::= "<="
     <present> ::= <attr> "=*"
     <substring> ::= <attr> "=" <initial> <any> <final>
     <initial> ::= NULL | <value>
     <any> ::= "*" <starval>
     <starval> ::= NULL | <value> "*" <starval>
     <final> ::= NULL | <value>

<attr> is a string representing an attribute type as defined in RFC 1777. <value> is a string representing an attribute value, or part of one, and has the form defined in RFC 1779. If a <value> must contain one of the characters '*' or '(' or ')', these should be escaped by preceding them with the backslash '\' character.

Unbind Method (LDAP Class)

This method unbinds from the directory server.

Syntax

public void unbind();

Remarks

This method unbinds from the directory server and breaks the connection.

ComputerList Event (LDAP Class)

This event is fired for each computer entry returned.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void computerList(LDAPComputerListEvent e) {}
  ...
}

public class LDAPComputerListEvent {
  public String name;
  public String operatingSystem;
  public String lastLogon;
  public int logonCount;
  public String dn;
}

Remarks

This event is fired once for each computer returned when the ListComputers method is called.

Connected Event (LDAP Class)

This event is fired immediately after a connection completes (or fails).

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void connected(LDAPConnectedEvent e) {}
  ...
}

public class LDAPConnectedEvent {
  public int statusCode;
  public String description;
}

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

ConnectionStatus Event (LDAP Class)

This event is fired to indicate changes in the connection state.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void connectionStatus(LDAPConnectionStatusEvent e) {}
  ...
}

public class LDAPConnectionStatusEvent {
  public String connectionEvent;
  public int statusCode;
  public String description;
}

Remarks

The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

Firewall connection complete.
Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable).
Remote host connection complete.
Remote host disconnected.
SSL or S/Shell connection broken.
Firewall host disconnected.
StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Disconnected Event (LDAP Class)

This event is fired when a connection is closed.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void disconnected(LDAPDisconnectedEvent e) {}
  ...
}

public class LDAPDisconnectedEvent {
  public int statusCode;
  public String description;
}

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.

Please refer to the Error Codes section for more information.

Error Event (LDAP Class)

Fired when information is available about errors during data delivery.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void error(LDAPErrorEvent e) {}
  ...
}

public class LDAPErrorEvent {
  public int errorCode;
  public String description;
}

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class throws an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

ExtendedResponse Event (LDAP Class)

This event is fired for Lightweight Directory Access Protocol (LDAP) V3 extended responses.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void extendedResponse(LDAPExtendedResponseEvent e) {}
  ...
}

public class LDAPExtendedResponseEvent {
  public int messageId;
  public String DN;
  public int resultCode;
  public String resultDescription;
  public String responseName;
  public byte[] responseValue;
}

Remarks

The first four parameters are the same as the parameters of the Result event. ResponseName and ResponseValue are related to the corresponding parameters of the call to ExtendedRequest.

GroupList Event (LDAP Class)

This event is fired for each group entry returned.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void groupList(LDAPGroupListEvent e) {}
  ...
}

public class LDAPGroupListEvent {
  public String name;
  public String description;
  public String dn;
}

Remarks

This event is fired once for each group entry returned when either of the ListGroups or ListUserGroups methods are called.

PITrail Event (LDAP Class)

This event provides detailed information about the interaction with the server.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void PITrail(LDAPPITrailEvent e) {}
  ...
}

public class LDAPPITrailEvent {
  public int direction;
  public String description;
  public String message;
}

Remarks

The PITrail event provides detailed information about all communication with the server. This is useful for debugging purposes.

Direction specifies the origin of the data. Possible values are as follows:

  • 0 - Client
  • 1 - Server

Description is a short description of the current packet. This is human readable and useful for informational logging.

Message contains a hex-encoded version of the raw message. This represents the exact value sent over the wire.

Result Event (LDAP Class)

This event is fired for every server response, except for search responses.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void result(LDAPResultEvent e) {}
  ...
}

public class LDAPResultEvent {
  public int messageId;
  public String DN;
  public int resultCode;
  public String resultDescription;
}

Remarks

The MessageId parameter identifies the corresponding request. ResultCode and ResultDescription show whether or not the operation was successful (on a successful operation, the ResultCode is 0). For a full list of possible result codes, see the ResultCode property.

SearchComplete Event (LDAP Class)

This event is fired upon completion of a search operation.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void searchComplete(LDAPSearchCompleteEvent e) {}
  ...
}

public class LDAPSearchCompleteEvent {
  public int messageId;
  public String DN;
  public int resultCode;
  public String resultDescription;
}

Remarks

The MessageId parameter identifies the corresponding request. ResultCode and ResultDescription show whether the operation was successful (on a successful operation, the ResultCode is 0).

SearchPage Event (LDAP Class)

This event is fired for every page returned from a search operation.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void searchPage(LDAPSearchPageEvent e) {}
  ...
}

public class LDAPSearchPageEvent {
  public int messageId;
  public String DN;
  public int resultCode;
  public String resultDescription;
  public boolean cancelSearch; //read-write
}

Remarks

This event is fired so the client can decide whether or not to continue with the Search operation. The signature is very similar to the SearchComplete event, with the addition of a CancelSearch parameter. If the search should be canceled (no more pages), the CancelSearch parameter should be set to True.

SearchResult Event (LDAP Class)

This event is fired for every entry returned from a search operation.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void searchResult(LDAPSearchResultEvent e) {}
  ...
}

public class LDAPSearchResultEvent {
  public int messageId;
  public String DN;
}

Remarks

MessageId identifies the corresponding search request. DN contains the distinguished name of the entry. The attribute type and value provided in the Attributes collection show the list of retrieved attributes for the entry.

Every search operation results in a sequence of 0 or more SearchResult events and a sequence of 0 or more SearchResultReference events, which are followed by a SearchComplete event.

SearchResultReference Event (LDAP Class)

This event is fired for every result reference returned from a search operation.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void searchResultReference(LDAPSearchResultReferenceEvent e) {}
  ...
}

public class LDAPSearchResultReferenceEvent {
  public int messageId;
  public String ldapUrl;
}

Remarks

MessageId identifies the corresponding search request. LdapUrl contains a URL reference to a server that can be used for continuing the search operation.

Every search operation results in a sequence of 0 or more SearchResult events and a sequence of 0 or more SearchResultReference events, which are followed by a SearchComplete event.

SSLServerAuthentication Event (LDAP Class)

Fired after the server presents its certificate to the client.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void SSLServerAuthentication(LDAPSSLServerAuthenticationEvent e) {}
  ...
}

public class LDAPSSLServerAuthenticationEvent {
  public byte[] certEncoded;
  public String certSubject;
  public String certIssuer;
  public String status;
  public boolean accept; //read-write
}

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (LDAP Class)

Fired when secure connection progress messages are available.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void SSLStatus(LDAPSSLStatusEvent e) {}
  ...
}

public class LDAPSSLStatusEvent {
  public String message;
}

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

UserList Event (LDAP Class)

This event is fired once for each user entry returned.

Syntax

public class DefaultLDAPEventListener implements LDAPEventListener {
  ...
  public void userList(LDAPUserListEvent e) {}
  ...
}

public class LDAPUserListEvent {
  public String name;
  public String description;
  public String lastLogon;
  public String memberOf;
  public String dn;
}

Remarks

This event is fired once for each user entry returned when the ListGroupMembers method is called.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

EffectiveDate
String (read-only)

Default Value: ""

This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

ExpirationDate
String (read-only)

Default Value: ""

This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

ExtendedKeyUsage
String (read-only)

Default Value: ""

This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

Fingerprint
String (read-only)

Default Value: ""

This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

FingerprintSHA1
String (read-only)

Default Value: ""

This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

FingerprintSHA256
String (read-only)

Default Value: ""

This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

Issuer
String (read-only)

Default Value: ""

This is the issuer of the certificate. This field contains a string representation of the name of the issuing authority for the certificate.

KeyPassword
String

Default Value: ""

This is the password for the certificate's private key (if any).

Some certificate stores may individually protect certificates' private keys, separate from the standard protection offered by the StorePassword. KeyPassword. This field can be used to read such password-protected private keys.

Note: this property defaults to the value of StorePassword. To clear it, you must set the property to the empty string (""). It can be set at any time, but when the private key's password is different from the store's password, then it must be set before calling PrivateKey.

PrivateKey
String (read-only)

Default Value: ""

This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The PrivateKey may be available but not exportable. In this case, PrivateKey returns an empty string.

PrivateKeyAvailable
boolean (read-only)

Default Value: False

This field shows whether a PrivateKey is available for the selected certificate. If PrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

PrivateKeyContainer
String (read-only)

Default Value: ""

This is the name of the PrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

PublicKey
String (read-only)

Default Value: ""

This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.

PublicKeyAlgorithm
String (read-only)

Default Value: ""

This field contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

PublicKeyLength
int (read-only)

Default Value: 0

This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

SerialNumber
String (read-only)

Default Value: ""

This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

SignatureAlgorithm
String (read-only)

Default Value: ""

The field contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

Store
String

Default Value: "MY"

This is the name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StoreB
byte[]

Default Value: "MY"

This is the name of the certificate store for the client certificate.

The StoreType field denotes the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field to specify client certificates. If Store has a value, and Subject or Encoded is set, a search for a certificate is initiated. Please see the Subject field for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

StorePassword
String

Default Value: ""

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

StoreType
int

Default Value: 0

This is the type of certificate store for this certificate.

The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This field can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user.

Note: This store type is not available in Java.

1 (cstMachine)For Windows, this specifies that the certificate store is a machine store.

Note: This store type is not available in Java.

2 (cstPFXFile)The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates.

Note: This store type is only available in Java.

5 (cstJKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.

Note: this store type is only available in Java.

6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).

Note: This store type is only available in Java and .NET.

22 (cstBCFKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.

Note: This store type is only available in Java and .NET.

23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS#11 interface.

To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN.

Code Example. SSH Authentication with Security Key: certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

SubjectAltNames
String (read-only)

Default Value: ""

This field contains comma-separated lists of alternative subject names for the certificate.

ThumbprintMD5
String (read-only)

Default Value: ""

This field contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA1
String (read-only)

Default Value: ""

This field contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

ThumbprintSHA256
String (read-only)

Default Value: ""

This field contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

Usage
String (read-only)

Default Value: ""

This field contains the text description of UsageFlags.

This value will be of one or more of the following strings and will be separated by commas:

  • Digital Signature
  • Non-Repudiation
  • Key Encipherment
  • Data Encipherment
  • Key Agreement
  • Certificate Signing
  • CRL Signing
  • Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

UsageFlags
int (read-only)

Default Value: 0

This field contains the flags that show intended use for the certificate. The value of UsageFlags is a combination of the following flags:

0x80Digital Signature
0x40Non-Repudiation
0x20Key Encipherment
0x10Data Encipherment
0x08Key Agreement
0x04Certificate Signing
0x02CRL Signing
0x01Encipher Only

Please see the Usage field for a text representation of UsageFlags.

This functionality currently is not available when the provider is OpenSSL.

Version
String (read-only)

Default Value: ""

This field contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".

Subject
String

Default Value: ""

This is the subject of the certificate used for client authentication.

This field will be populated with the full subject of the loaded certificate. When loading a certificate, the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

FieldMeaning
CNCommon Name. This is commonly a hostname like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma, it must be quoted.

Encoded
String

Default Value: ""

This is the certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

EncodedB
byte[]

Default Value: ""

This is the certificate (PEM/Base64 encoded). This field is used to assign a specific certificate. The Store and Subject fields also may be used to specify a certificate.

When Encoded is set, a search is initiated in the current Store for the private key of the certificate. If the key is found, Subject is updated to reflect the full subject of the selected certificate; otherwise, Subject is set to an empty string.

Constructors

public Certificate();

Creates a Certificate instance whose properties can be set. This is useful for use with CERTMGR when generating new certificates.

public Certificate( certificateFile);

Opens CertificateFile and reads out the contents as an X.509 public key.

public Certificate( encoded);

Parses Encoded as an X.509 public key.

public Certificate( storeType,  store,  storePassword,  subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

public Certificate( storeType,  store,  storePassword,  subject,  configurationString);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. ConfigurationString is a newline separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CryptoAPI option. The default value is True (the key is persisted). "Thumbprint" - an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to cstUser, cstMachine, cstPublicKeyFile, and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

public Certificate( storeType,  store,  storePassword,  encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

public Certificate( storeType,  store,  storePassword,  subject);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or Base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

public Certificate( storeType,  store,  storePassword,  subject,  configurationString);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or Base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.

public Certificate( storeType,  store,  storePassword,  encoded);

CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or Base64-encoded) containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.

Firewall Type

The firewall the class will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall Host and the FirewallType.

Fields

AutoDetect
boolean

Default Value: False

This field tells the class whether or not to automatically detect and use firewall system settings, if available.

Connection information will first be obtained from Java system properties, such as http.proxyHost and https.proxyHost. Java properties may be set in a variety of ways; please consult the Java documentation for information about how firewall and proxy values can be specified.

If no Java system properties define connection information, the class will inspect the Windows registry for connection information that may be present on the system (applicable only on Windows systems).

FirewallType
int

Default Value: 0

This field determines the type of firewall to connect through. The applicable values are as follows:

fwNone (0)No firewall (default setting).
fwTunnel (1)Connect through a tunneling proxy. Port is set to 80.
fwSOCKS4 (2)Connect through a SOCKS4 Proxy. Port is set to 1080.
fwSOCKS5 (3)Connect through a SOCKS5 Proxy. Port is set to 1080.
fwSOCKS4A (10)Connect through a SOCKS4A Proxy. Port is set to 1080.

Host
String

Default Value: ""

This field contains the name or IP address of the firewall (optional). If a Host is given, the requested connections will be authenticated through the specified firewall when connecting.

If this field is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this field is set to the corresponding address. If the search is not successful, the class throws an exception.

Password
String

Default Value: ""

This field contains a password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password fields are used to connect and authenticate to the given firewall. If the authentication fails, the class throws an exception.

Port
int

Default Value: 0

This field contains the Transmission Control Protocol (TCP) port for the firewall Host. See the description of the Host field for details.

Note: This field is set automatically when FirewallType is set to a valid value. See the description of the FirewallType field for details.

User
String

Default Value: ""

This field contains a username if authentication is to be used when connecting through a firewall. If Host is specified, this field and the Password field are used to connect and authenticate to the given Firewall. If the authentication fails, the class throws an exception.

Constructors

public Firewall();



LDAPAttribute Type

This types describes an attribute for the current entry.

Remarks

This type describes an attribute for the current Lightweight Directory Access Protocol (LDAP) entry. The ModOp field is used only in Modify operations.

Fields

AttributeType
String

Default Value: ""

This field contains the attribute type for the current entry.

If the value of AttributeType is an empty string, then the Value that contains the corresponding value is part of a set of values, and the attribute type for the set is specified in the previous attribute of the collection with a nonempty AttributeType.

ModOp
int

Default Value: 0

This field contains an operation to apply to attributes during a Lightweight Directory Access Protocol (LDAP) modify operation.

Possible values include the following:

amoAdd (0)amoAdd will add the specified value to the given attribute, creating the attribute if it does not already exist.
amoDelete (1)amoDelete will delete the specified value from the given attribute. If all or none of the values are specified for the value, the entire attribute will be deleted; otherwise, only the specific value(s) listed will be removed.
amoReplace (2)amoReplace will replace all existing values of the given attribute with the new values specified.

Value
String

Default Value: ""

This field contains the attribute value for the current entry.

If the value is part of a set of values, the AttributeType that contains the corresponding attribute type is an empty string, and the attribute type for the set is specified in the previous attribute of the collection with a nonempty AttributeType.

ValueB
byte[]

Default Value: ""

This field contains the attribute value for the current entry.

If the value is part of a set of values, the AttributeType that contains the corresponding attribute type is an empty string, and the attribute type for the set is specified in the previous attribute of the collection with a nonempty AttributeType.

Constructors

public LDAPAttribute();



public LDAPAttribute( attributeType);



public LDAPAttribute( attributeType,  value);



public LDAPAttribute( attributeType,  value,  modOp);



LDAPReference Type

This type includes a reference returned from the server.

Remarks

This type describes a Lightweight Directory Access Protocol (LDAP) reference, which may be queried inside the SearchResult, SearchResultReference, Result, or SearchComplete events.

When inside a SearchResult or SearchResultReference event, references will be a search result reference (that is, a continuation reference), in which case they represent the URLs to contact to continue the search.

When inside a Result or SearchComplete event, a reference will be a regular referral, in which case it represents the URL to contact to complete the requested operation.

Fields

URL
String (read-only)

Default Value: ""

The url of the LDAP reference. If inside a SearchResult or SearchResultReference event, it represents a URL to contact to continue the search. If inside the Result event or SearchComplete event it represents the URL to contact in order to complete the requested operation.

Constructors

public LDAPReference();



Config Settings (LDAP Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

LDAP Config Settings

DomainController:   Returns the name of the domain controller.

This configuration setting may be queried to return the name of the default domain controller in Active Directory domains.

Note: This functionality is available only in Windows.

Note: This functionality is not available in Java.

FriendlyGUID:   Whether to return GUID attribute values in a human readable format.

When inspecting object attributes, this configuration setting determines whether GUID attributes, such as "objectGUID" are returned as binary objects or converted into a human readable string, such as "708d9374-d64a-49b2-97ea-489ddc717703". When set to True, a friendly string value is returned. When set to False (default), a binary object is returned.

FriendlySID:   Whether to return SID attribute values in a human readable format.

When inspecting object attributes, this configuration setting determines whether SID attributes, such as "objectSid" are returned as binary objects or converted into a human readable string, such as "S-1-5-21-4272240814-246508344-1325542772-12464". When set to True, a friendly string value is returned. When set to False (default), a binary object is returned.

MaxAttributes:   Instructs class to save the amount of attributes specified that are returned by the server.

This configuration setting should be set when populating the Attributes collection as a result of a Lightweight Directory Access Protocol (LDAP) search. This value represents the number of LDAP attributes that are to be saved in the collection.

To save all items to the collection, set this configuration setting to -1. If no items are wanted, set this to 0, which will not save any items to the collection. The default for this configuration setting is -1, so all items will be included in the collection.

You may still add to the Attributes collection when this configuration is set. This configuration specifies only a maximum for returned attributes.

RequestControls:   Controls to include in the request.

This configuration setting may be used to specify LDAP controls in the request. The expected format is a space-separated sequence of OIDs and hex-encoded values. For instance, a single control with a value of 04 may be sent as follows: ldap.Config("RequestControls=1.2.826.0.1.3344810.2.3 04"); To send a control without a value, specify only the OID. For instance: ldap.Config("RequestControls=1.3.6.1.4.1.42.2.27.8.5.1");

ResponseControls:   Controls present in the response.

This configuration setting holds the LDAP controls returned in the response (if any). The format is a space-separated sequence of OIDs and hex-encoded values. For instance: Log(ldap.Config("ResponseControls")); The output may look something like this: 1.2.826.0.1.3344810.2.3 04

UseDefaultDC:   Whether to connect to the default Domain Controller when calling Bind.

If this configuration setting is set to True, ServerName does not need to be set before calling Bind in Active Directory domains. When True, the class will query the system for the default domain controller and attempt to establish a connection with that server.

Note: This functionality is available only in Windows.

Note: This functionality is not available in Java.

TCPClient Config Settings

CloseStreamAfterTransfer:   If true, the component will close the upload or download stream after the transfer.

This configuration setting determines whether the input or output stream is closed after the transfer completes. When set to True (default), all streams will be closed after a transfer is completed. To keep streams open after the transfer of data, set this to False. The default value is True.

ConnectionTimeout:   Sets a separate timeout value for establishing a connection.

When set, this configuration setting allows you to specify a different timeout value for establishing a connection. Otherwise, the class will use Timeout for establishing a connection and transmitting/receiving data.

FirewallAutoDetect:   Tells the class whether or not to automatically detect and use firewall system settings, if available.

This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallHost:   Name or IP address of firewall (optional).

If a FirewallHost is given, requested connections will be authenticated through the specified firewall when connecting.

If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallListener:   If true, the component binds to a SOCKS firewall as a server (TCPClient only).

This entry is for TCPClient only and does not work for other components that descend from TCPClient.

If this entry is set, the class acts as a server. RemoteHost and RemotePort are used to tell the SOCKS firewall in which address and port to listen to. The firewall rules may ignore RemoteHost, and it is recommended that RemoteHost be set to empty string in this case.

RemotePort is the port in which the firewall will listen to. If set to 0, the firewall will select a random port. The binding (address and port) is provided through the ConnectionStatus event.

The connection to the firewall is made by calling the Connect method.

FirewallPassword:   Password to be used if authentication is to be used when connecting through the firewall.

If FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the given firewall. If the authentication fails, the class throws an exception.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallPort:   The TCP port for the FirewallHost;.

The FirewallPort is set automatically when FirewallType is set to a valid value.

Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties.

FirewallType:   Determines the type of firewall to connect through.

The appropriate values are as follows:

0No firewall (default setting).
1Connect through a tunneling proxy. FirewallPort is set to 80.
2Connect through a SOCKS4 Proxy. FirewallPort is set to 1080.
3Connect through a SOCKS5 Proxy. FirewallPort is set to 1080.
10Connect through a SOCKS4A Proxy. FirewallPort is set to 1080.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

FirewallUser:   A user name if authentication is to be used connecting through a firewall.

If the FirewallHost is specified, the FirewallUser and FirewallPassword settings are used to connect and authenticate to the Firewall. If the authentication fails, the class throws an exception.

Note: This setting is provided for use by classs that do not directly expose Firewall properties.

KeepAliveInterval:   The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received.

When set, TCPKeepAlive will automatically be set to True. A TCP keep-alive packet will be sent after a period of inactivity as defined by KeepAliveTime. If no acknowledgment is received from the remote host, the keep-alive packet will be sent again. This configuration setting specifies the interval at which the successive keep-alive packets are sent in milliseconds. This system default if this value is not specified here is 1 second.

Note: This value is not applicable in macOS.

KeepAliveTime:   The inactivity time in milliseconds before a TCP keep-alive packet is sent.

When set, TCPKeepAlive will automatically be set to True. By default, the operating system will determine the time a connection is idle before a Transmission Control Protocol (TCP) keep-alive packet is sent. This system default if this value is not specified here is 2 hours. In many cases, a shorter interval is more useful. Set this value to the desired interval in milliseconds.

Linger:   When set to True, connections are terminated gracefully.

This property controls how a connection is closed. The default is True.

In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.

In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.

The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).

Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.

LingerTime:   Time in seconds to have the connection linger.

LingerTime is the time, in seconds, the socket connection will linger. This value is 0 by default, which means it will use the default IP timeout.

LocalHost:   The name of the local host through which connections are initiated or accepted.

The LocalHost setting contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface), setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.

If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

LocalPort:   The port in the local host where the class binds.

This configuration setting must be set before a connection is attempted. It instructs the class to bind to a specific port (or communication endpoint) in the local machine.

Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.

This configuration setting is useful when trying to connect to services that require a trusted port on the client side. An example is the remote shell (rsh) service in UNIX systems.

MaxLineLength:   The maximum amount of data to accumulate when no EOL is found.

MaxLineLength is the size of an internal buffer, which holds received data while waiting for an EOL string.

If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.

If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.

The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.

MaxTransferRate:   The transfer rate limit in bytes per second.

This configuration setting can be used to throttle outbound TCP traffic. Set this to the number of bytes to be sent per second. By default, this is not set and there is no limit.

ProxyExceptionsList:   A semicolon separated list of hosts and IPs to bypass when using a proxy.

This configuration setting optionally specifies a semicolon-separated list of hostnames or IP addresses to bypass when a proxy is in use. When requests are made to hosts specified in this property, the proxy will not be used. For instance:

www.google.com;www.nsoftware.com

TCPKeepAlive:   Determines whether or not the keep alive socket option is enabled.

If set to True, the socket's keep-alive option is enabled and keep-alive packets will be sent periodically to maintain the connection. Set KeepAliveTime and KeepAliveInterval to configure the timing of the keep-alive packets.

Note: This value is not applicable in Java.

TcpNoDelay:   Whether or not to delay when sending packets.

When set to True, the socket will send all data that are ready to send at once. When set to False, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this configuration setting is set to False.

UseIPv6:   Whether to use IPv6.

When set to 0 (default), the class will use IPv4 exclusively. When set to 1, the class will use IPv6 exclusively. To instruct the class to prefer IPv6 addresses, but use IPv4 if IPv6 is not supported on the system, this setting should be set to 2. The default value is 0. Possible values are as follows:

0 IPv4 only
1 IPv6 only
2 IPv6 with IPv4 fallback
UseNTLMv2:   Whether to use NTLM V2.

When authenticating with NTLM, this setting specifies whether NTLM V2 is used. By default this value is False and NTLM V1 will be used. Set this to True to use NTLM V2.

SSL Config Settings

LogSSLPackets:   Controls whether SSL packets are logged when using the internal security API.

When SSLProvider is set to Internal, this configuration setting controls whether Secure Sockets Layer (SSL) packets should be logged. By default, this configuration setting is False, as it is useful only for debugging purposes.

When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.

Enabling this configuration setting has no effect if SSLProvider is set to Platform.

ReuseSSLSession:   Determines if the SSL session is reused.

If set to True, the class will reuse the context if and only if the following criteria are met:

  • The target host name is the same.
  • The system cache entry has not expired (default timeout is 10 hours).
  • The application process that calls the function is the same.
  • The logon session is the same.
  • The instance of the class is the same.

SSLCACerts:   A newline separated list of CA certificate to be included when performing an SSL handshake.

When SSLProvider is set to Internal, this configuration setting specifies one or more CA certificates to be included with the SSLCert property. Some servers or clients require the entire chain, including CA certificates, to be presented when performing SSL authentication. The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermedaite Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLCheckCRL:   Whether to check the Certificate Revocation List for the server certificate.

This configuration setting specifies whether the class will check the Certificate Revocation List (CRL) specified by the server certificate. If set to 1 or 2, the class will first obtain the list of CRL URLs from the server certificate's CRL distribution points extension. The class will then make HTTP requests to each CRL endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation the class throws an exception.

When set to 0 (default), the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but it will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.

This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.

SSLCheckOCSP:   Whether to use OCSP to check the status of the server certificate.

This configuration setting specifies whether the class will use OCSP to check the validity of the server certificate. If set to 1 or 2, the class will first obtain the Online Certificate Status Protocol (OCSP) URL from the server certificate's OCSP extension. The class will then locate the issuing certificate and make an HTTP request to the OCSP endpoint to check the validity of the server's certificate. If the certificate has been revoked or any other issues are found during validation, the class throws an exception.

When set to 0 (default), the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but it will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.

This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.

SSLCipherStrength:   The minimum cipher strength used for bulk encryption.

This minimum cipher strength is largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Note: This configuration setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.

Use this configuration setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList configuration setting.

SSLClientCACerts:   A newline separated list of CA certificates to use during SSL client certificate validation.

This configuration setting is only applicable to server components (e.g., TCPServer) see SSLServerCACerts for client components (e.g., TCPClient). This setting can be used to optionally specify one or more CA certificates to be used when verifying the client certificate that is presented by the client during the SSL handshake when SSLAuthenticateClients is enabled. When verifying the client's certificate, the certificates trusted by the system will be used as part of the verification process. If the client's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the client's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLContextProtocol:   The protocol used when getting an SSLContext instance.

Possible values are SSL, SSLv2, SSLv3, TLS, and TLSv1. Use this configuration setting only in case your security provider does not support TLS. This is the parameter "protocol" inside the SSLContext.getInstance(protocol) call.

SSLEnabledCipherSuites:   The cipher suite to be used in an SSL negotiation.

This configuration setting enables the cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Note: This value must be set after SSLProvider is set.

Example values: obj.config("SSLEnabledCipherSuites=*"); obj.config("SSLEnabledCipherSuites=SSL_RSA_WITH_RC4_128_SHA"); obj.config("SSLEnabledCipherSuites=SSL_RSA_WITH_RC4_128_SHA; SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA"); Possible values when SSLProvider is set to Platform include the following:

  • SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA
  • SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • SSL_RSA_WITH_RC4_128_SHA
  • SSL_RSA_WITH_DES_CBC_SHA
  • SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
  • SSL_DH_anon_WITH_DES_CBC_SHA
  • SSL_RSA_EXPORT_WITH_RC4_40_MD5
  • SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA
  • SSL_DH_anon_EXPORT_WITH_RC4_40_MD5
  • SSL_DHE_DSS_WITH_DES_CBC_SHA
  • SSL_RSA_WITH_NULL_MD5
  • SSL_DH_anon_WITH_3DES_EDE_CBC_SHA
  • SSL_DHE_RSA_WITH_DES_CBC_SHA
  • SSL_DH_anon_EXPORT_WITH_DES40_CBC_SHA
  • SSL_RSA_WITH_NULL_SHA
  • SSL_DH_anon_WITH_RC4_128_MD5
  • SSL_RSA_WITH_RC4_128_MD5
  • SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • SSL_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_NULL_SHA
  • TLS_DH_anon_WITH_AES_128_CBC_SHA256 (Not Recommended)
  • TLS_ECDH_anon_WITH_RC4_128_SHA
  • TLS_DH_anon_WITH_AES_128_CBC_SHA (Not Recommended)
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_KRB5_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_KRB5_EXPORT_WITH_RC4_40_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_RC4_128_SHA
  • TLS_ECDH_ECDSA_WITH_RC4_128_SHA
  • TLS_ECDH_anon_WITH_NULL_SHA
  • TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_RSA_WITH_NULL_SHA256
  • TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA
  • TLS_KRB5_WITH_RC4_128_MD5
  • TLS_ECDHE_ECDSA_WITH_NULL_SHA
  • TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_RC4_128_SHA
  • TLS_EMPTY_RENEGOTIATION_INFO_SCSV
  • TLS_KRB5_WITH_3DES_EDE_CBC_MD5
  • TLS_KRB5_WITH_RC4_128_SHA
  • TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_NULL_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
  • TLS_KRB5_WITH_DES_CBC_MD5
  • TLS_KRB5_EXPORT_WITH_RC4_40_MD5
  • TLS_KRB5_EXPORT_WITH_DES_CBC_40_MD5
  • TLS_ECDH_anon_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_KRB5_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_KRB5_EXPORT_WITH_DES_CBC_40_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_NULL_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA

Possible values when SSLProvider is set to Internal include the following:

  • TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_128_GCM_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
  • TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
  • TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
  • TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA
  • TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
  • TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_RSA_WITH_DES_CBC_SHA
  • TLS_DHE_DSS_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_RC4_128_MD5
  • TLS_RSA_WITH_RC4_128_SHA

When TLS 1.3 is negotiated (see SSLEnabledProtocols), only the following cipher suites are supported:

  • TLS_AES_256_GCM_SHA384
  • TLS_CHACHA20_POLY1305_SHA256
  • TLS_AES_128_GCM_SHA256

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols:   Used to enable/disable the supported security protocols.

This configuration setting is used to enable or disable the supported security protocols.

Not all supported protocols are enabled by default. The default value is 4032 for client components, and 3072 for server components. To specify a combination of enabled protocol versions set this config to the binary OR of one or more of the following values:

TLS1.312288 (Hex 3000)
TLS1.23072 (Hex C00) (Default - Client and Server)
TLS1.1768 (Hex 300) (Default - Client)
TLS1 192 (Hex C0) (Default - Client)
SSL3 48 (Hex 30)
SSL2 12 (Hex 0C)

Note that only TLS 1.2 is enabled for server components that accept incoming connections. This adheres to industry standards to ensure a secure connection. Client components enable TLS 1.0, TLS 1.1, and TLS 1.2 by default and will negotiate the highest mutually supported version when connecting to a server, which should be TLS 1.2 in most cases.

SSLEnabledProtocols: Transport Layer Security (TLS) 1.3 Notes:

By default when TLS 1.3 is enabled, the class will use the internal TLS implementation when the SSLProvider is set to Automatic for all editions.

In editions that are designed to run on Windows, SSLProvider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is supported only on Windows 11/Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.

If set to 1 (Platform provider), please be aware of the following notes:

  • The platform provider is available only on Windows 11/Windows Server 2022 and up.
  • SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
  • If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2, these restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.

SSLEnabledProtocols: SSL2 and SSL3 Notes:

SSL 2.0 and 3.0 are not supported by the class when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.

SSLEnableRenegotiation:   Whether the renegotiation_info SSL extension is supported.

This configuration setting specifies whether the renegotiation_info SSL extension will be used in the request when using the internal security API. This configuration setting is false by default, but it can be set to true to enable the extension.

This configuration setting is applicable only when SSLProvider is set to Internal.

SSLIncludeCertChain:   Whether the entire certificate chain is included in the SSLServerAuthentication event.

This configuration setting specifies whether the Encoded parameter of the SSLServerAuthentication event contains the full certificate chain. By default this value is False and only the leaf certificate will be present in the Encoded parameter of the SSLServerAuthentication event.

If set to True, all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.

Note: When SSLProvider is set to Internal this value is automatically set to true. This is needed for proper validation when using the internal provider.

SSLKeyLogFile:   The location of a file where per-session secrets are written for debugging purposes.

This configuration setting optionally specifies the full path to a file on disk where per-session secrets are stored for debugging purposes.

When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools, such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffic for debugging purposes. When writing to this file, the class will only append, it will not overwrite previous values.

Note: This configuration setting is applicable only when SSLProvider is set to Internal.

SSLNegotiatedCipher:   Returns the negotiated cipher suite.

This configuration setting returns the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipher[connId]");

SSLNegotiatedCipherStrength:   Returns the negotiated cipher suite strength.

This configuration setting returns the strength of the cipher suite negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherStrength[connId]");

SSLNegotiatedCipherSuite:   Returns the negotiated cipher suite.

This configuration setting returns the cipher suite negotiated during the SSL handshake represented as a single string.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedCipherSuite[connId]");

SSLNegotiatedKeyExchange:   Returns the negotiated key exchange algorithm.

This configuration setting returns the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchange[connId]");

SSLNegotiatedKeyExchangeStrength:   Returns the negotiated key exchange algorithm strength.

This configuration setting returns the strength of the key exchange algorithm negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedKeyExchangeStrength[connId]");

SSLNegotiatedVersion:   Returns the negotiated protocol version.

This configuration setting returns the protocol version negotiated during the SSL handshake.

Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example: server.Config("SSLNegotiatedVersion[connId]");

SSLServerCACerts:   A newline separated list of CA certificates to use during SSL server certificate validation.

This configuration setting is only used by client components (e.g., TCPClient) see SSLClientCACerts for server components (e.g., TCPServer). This configuration setting can be used to optionally specify one or more CA certificates to be used when connecting to the server and verifying the server certificate. When verifying the server's certificate, the certificates trusted by the system will be used as part of the verification process. If the server's CA certificates are not installed to the trusted system store, they may be specified here so they are included when performing the verification process. This configuration setting should be set only if the server's CA certificates are not already trusted on the system and cannot be installed to the trusted system store.

The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

SSLTrustManagerFactoryAlgorithm:   The algorithm to be used to create a TrustManager through TrustManagerFactory.

Possible values include SunX509. This is the parameter "algorithm" inside the TrustManagerFactory.getInstance(algorithm) call.

TLS12SignatureAlgorithms:   Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal.

This configuration setting specifies the allowed server certificate signature algorithms when SSLProvider is set to Internal and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the class will verify that the server certificate signature algorithm is among the values specified in this configuration setting. If the server certificate signature algorithm is unsupported, the class throws an exception.

The format of this value is a comma-separated list of hash-signature combinations. For instance: component.SSLProvider = TCPClientSSLProviders.sslpInternal; component.Config("SSLEnabledProtocols=3072"); //TLS 1.2 component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa"); The default value for this configuration setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.

To not restrict the server's certificate signature algorithm, specify an empty string as the value for this configuration setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups:   The supported groups for ECC.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:

  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)

TLS13KeyShareGroups:   The groups for which to pregenerate key shares.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional roundtrip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result, only some groups are included by default in this configuration setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used that is not present in this list, it will incur an additional roundtrip and time to generate the key share for that group.

In most cases, this configuration setting does not need to be modified. This should be modified only if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448"
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1"
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096"
  • "ffdhe_6144"
  • "ffdhe_8192"

TLS13SignatureAlgorithms:   The allowed certificate signature algorithms.

This configuration setting holds a comma-separated list of allowed signature algorithms. Possible values include the following:

  • "ed25519" (default)
  • "ed448" (default)
  • "ecdsa_secp256r1_sha256" (default)
  • "ecdsa_secp384r1_sha384" (default)
  • "ecdsa_secp521r1_sha512" (default)
  • "rsa_pkcs1_sha256" (default)
  • "rsa_pkcs1_sha384" (default)
  • "rsa_pkcs1_sha512" (default)
  • "rsa_pss_sha256" (default)
  • "rsa_pss_sha384" (default)
  • "rsa_pss_sha512" (default)
The default value is rsa_pss_sha256,rsa_pss_sha384,rsa_pss_sha512,rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512,ecdsa_secp256r1_sha256,ecdsa_secp384r1_sha384,ecdsa_secp521r1_sha512,ed25519,ed448. This configuration setting is applicable only when SSLEnabledProtocols includes TLS 1.3.
TLS13SupportedGroups:   The supported groups for (EC)DHE key exchange.

This configuration setting specifies a comma-separated list of named groups used in TLS 1.3 for key exchange. This configuration setting should be modified only if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448" (default)
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096" (default)
  • "ffdhe_6144" (default)
  • "ffdhe_8192" (default)

Socket Config Settings

AbsoluteTimeout:   Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method that does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

Note: This option is not valid for User Datagram Protocol (UDP) ports.

FirewallData:   Used to send extra data to the firewall.

When the firewall is a tunneling proxy, use this property to send custom (additional) headers to the firewall (e.g., headers for custom authentication schemes).

InBufferSize:   The size in bytes of the incoming queue of the socket.

This is the size of an internal queue in the Transmission Control Protocol (TCP)/IP stack. You can increase or decrease its size depending on the amount of data that you will be receiving. In some cases, increasing the value of the InBufferSize setting can provide significant improvements in performance.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

OutBufferSize:   The size in bytes of the outgoing queue of the socket.

This is the size of an internal queue in the TCP/IP stack. You can increase or decrease its size depending on the amount of data that you will be sending. In some cases, increasing the value of the OutBufferSize setting can provide significant improvements in performance.

Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.

Base Config Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

GUIAvailable:   Whether or not a message loop is available for processing events.

In a GUI-based application, long-running blocking operations may cause the application to stop responding to input until the operation returns. The class will attempt to discover whether or not the application has a message loop and, if one is discovered, it will process events in that message loop during any such blocking operation.

In some non-GUI applications, an invalid message loop may be discovered that will result in errant behavior. In these cases, setting GUIAvailable to false will ensure that the class does not attempt to process external events.

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a class is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
  • Last Valid Build: The last valid build number for which the license will work.
MaskSensitiveData:   Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseDaemonThreads:   Whether threads created by the class are daemon threads.

If set to True (default), when the class creates a thread, the thread's Daemon property will be explicitly set to True. When set to False, the class will not set the Daemon property on the created thread. The default value is True.

UseInternalSecurityAPI:   Whether or not to use the system security libraries or an internal implementation.

When set to false, the class will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to true tells the class to use the internal implementation instead of using the system security libraries.

This setting is set to false by default on all platforms.

Trappable Errors (LDAP Class)

LDAP Errors

118   Firewall error. Error message contains detailed description.
301   Index out of range.
331   Bad attribute index.
334   Busy executing current method.
335   Error in search filter.
336   Protocol error.

TCPClient Errors

100   You cannot change the RemotePort at this time. A connection is in progress.
101   You cannot change the RemoteHost (Server) at this time. A connection is in progress.
102   The RemoteHost address is invalid (0.0.0.0).
104   Already connected. If you want to reconnect, close the current connection first.
106   You cannot change the LocalPort at this time. A connection is in progress.
107   You cannot change the LocalHost at this time. A connection is in progress.
112   You cannot change MaxLineLength at this time. A connection is in progress.
116   RemotePort cannot be zero. Please specify a valid service port number.
117   You cannot change the UseConnection option while the class is active.
135   Operation would block.
201   Timeout.
211   Action impossible in control's present state.
212   Action impossible while not connected.
213   Action impossible while listening.
301   Timeout.
303   Could not open file.
434   Unable to convert string to selected CodePage.
1105   Already connecting. If you want to reconnect, close the current connection first.
1117   You need to connect first.
1119   You cannot change the LocalHost at this time. A connection is in progress.
1120   Connection dropped by remote host.

SSL Errors

270   Cannot load specified security library.
271   Cannot open certificate store.
272   Cannot find specified certificate.
273   Cannot acquire security credentials.
274   Cannot find certificate chain.
275   Cannot verify certificate chain.
276   Error during handshake.
280   Error verifying certificate.
281   Could not find client certificate.
282   Could not find server certificate.
283   Error encrypting data.
284   Error decrypting data.

TCP/IP Errors

10004   [10004] Interrupted system call.
10009   [10009] Bad file number.
10013   [10013] Access denied.
10014   [10014] Bad address.
10022   [10022] Invalid argument.
10024   [10024] Too many open files.
10035   [10035] Operation would block.
10036   [10036] Operation now in progress.
10037   [10037] Operation already in progress.
10038   [10038] Socket operation on nonsocket.
10039   [10039] Destination address required.
10040   [10040] Message is too long.
10041   [10041] Protocol wrong type for socket.
10042   [10042] Bad protocol option.
10043   [10043] Protocol is not supported.
10044   [10044] Socket type is not supported.
10045   [10045] Operation is not supported on socket.
10046   [10046] Protocol family is not supported.
10047   [10047] Address family is not supported by protocol family.
10048   [10048] Address already in use.
10049   [10049] Cannot assign requested address.
10050   [10050] Network is down.
10051   [10051] Network is unreachable.
10052   [10052] Net dropped connection or reset.
10053   [10053] Software caused connection abort.
10054   [10054] Connection reset by peer.
10055   [10055] No buffer space available.
10056   [10056] Socket is already connected.
10057   [10057] Socket is not connected.
10058   [10058] Cannot send after socket shutdown.
10059   [10059] Too many references, cannot splice.
10060   [10060] Connection timed out.
10061   [10061] Connection refused.
10062   [10062] Too many levels of symbolic links.
10063   [10063] File name is too long.
10064   [10064] Host is down.
10065   [10065] No route to host.
10066   [10066] Directory is not empty
10067   [10067] Too many processes.
10068   [10068] Too many users.
10069   [10069] Disc Quota Exceeded.
10070   [10070] Stale NFS file handle.
10071   [10071] Too many levels of remote in path.
10091   [10091] Network subsystem is unavailable.
10092   [10092] WINSOCK DLL Version out of range.
10093   [10093] Winsock is not loaded yet.
11001   [11001] Host not found.
11002   [11002] Nonauthoritative 'Host not found' (try again or check DNS setup).
11003   [11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP.
11004   [11004] Valid name, no data record (check DNS setup).