SOAP Class
Properties Methods Events Config Settings Errors
The SOAP Class is a generic SOAP client supporting SOAP 1.1 that is used to communicate with SOAP servers.
Syntax
ipworks.soap()
Remarks
The SOAP Class supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL-related settings are also supported through the Config method.
The SOAP Class implements a standard SOAP client as specified in the SOAP 1.1 specification.
The class uses HTTP to communicate with SOAP servers and uses an internal XML parser to process the results. The SOAP requests are specified by first setting the SOAP Method and MethodURI, as well as optional parameters in the Params properties. Then set the target URL and call the SendRequest method.
The results will be provided through the ReturnValue property and the Params properties (for output parameters). Additionally, properties such as XPath, XElement, and XText allow for more granular traversal of the SOAP response.
If the server returns an error, the FaultCode, FaultString, and FaultActor properties will provide information about the error condition.
The class may also be used in offline mode. This is supported by methods such as BuildPacket and EvalPacket. The corresponding SOAP packet will be stored in the SOAPPacket property. Offline mode is important in cases in which the underlying SOAP transport is not HTTP but another mechanism (e.g., SMTP and POP for email).
By providing direct access to the SOAP packet in offline mode, the class allows for possible extension and full control over the SOAPPacket. The SendPacket method may then be used to send the custom-created SOAPPacket to the destination URL.
Property List
The following is the full list of the properties of the class with short descriptions. Click on the links for further details.
Accept | This property includes a list of acceptable MIME types for the request. |
ActionURI | This property includes the value of the SOAP-action header. |
Authorization | This property includes the Authorization string to be sent to the server. |
AuthScheme | This property specifies the authentication scheme to use when server authentication is required. |
Connected | This property shows whether the class is connected. |
ContentType | This property includes the content type for SOAP request data. |
Cookies | This property includes a collection of cookies. |
FaultActor | This property includes the actor of any faults returned by the SOAP server. |
FaultCode | This property includes the code of any faults returned by the SOAP server. |
FaultString | This property includes the textual description of any faults returned by the SOAP server. |
Firewall | A set of properties related to firewall access. |
FollowRedirects | This property determines what happens when the server issues a redirect. |
Idle | This property specifies the current status of the class. |
IfModifiedSince | This property includes a date determining the maximum age of the desired document. |
LocalFile | This property includes the path to a local file for downloading. If the file exists, it is overwritten. |
LocalHost | This property includes the name of the local host or user-assigned IP interface through which connections are initiated or accepted. |
Method | This property includes the remote Method . |
MethodURI | This property includes the URI corresponding to the SOAP Method . |
Namespaces | This property includes a collection of namespaces in the current stack. |
OtherHeaders | This property includes other headers as determined by the user (optional). |
Params | This property includes a collection of parameters for the SOAP Method . |
ParsedHeaders | This property includes a collection of headers returned from the last request. |
Password | This property includes a password if authentication is to be used. |
Pragma | This property includes a browser- or server-specific header line (optional). |
Proxy | A set of properties related to proxy access. |
Referer | This property includes the referer URL/document (optional). |
ReturnValue | This property includes the value returned by the SOAP Method . |
SOAPEncoding | This property includes the type of SOAP encoding used for SOAP requests. |
SOAPHeader | This property includes the contents of the optional SOAP header sent to the server. |
SOAPPacket | This property includes the full contents of the SOAP packet. |
SSLAcceptServerCert | This property instructs the class to unconditionally accept the server certificate that matches the supplied certificate. |
SSLCert | This property includes the certificate to be used during Secure Sockets Layer (SSL) negotiation. |
SSLProvider | This property specifies the Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use. |
SSLServerCert | This property includes the server certificate for the last established connection. |
StatusLine | This property is the first line of the last server response. |
Timeout | This property includes the timeout for the class. |
TransferredData | This property includes the contents of the last response from the server. |
TransferredDataLimit | This property specifies the maximum amount of data to be transferred. |
TransferredHeaders | This property includes the full set of headers as received from the server. |
URL | This property specifies the URL to retrieve. |
User | This property includes a user name if authentication is to be used. |
ValueFormat | This property includes the format of data returned or set. |
XAttributes | This property includes a collection of attributes of the current element. |
XChildren | This property includes the collection of child elements for the current element. |
XElement | This property includes the name of the element pointed to by XPath . |
XNamespace | This property includes the namespace of the element pointed to by XPath . |
XParent | This property includes the parent of the element pointed to by XPath . |
XPath | This property includes a path into the SOAPPacket received by the server. |
XPrefix | This property includes the prefix of the element pointed to by XPath . |
XText | This property includes the text of the element pointed to by XPath . |
Method List
The following is the full list of the methods of the class with short descriptions. Click on the links for further details.
AddCookie | This method adds a cookie and the corresponding value to the outgoing request headers. |
AddNamespace | This method adds a namespace to the Namespaces properties. |
AddParam | This method adds a parameter-value pair. |
Attr | This method returns the value of the specified attribute. |
BuildPacket | This method builds the request packet. |
Config | Sets or retrieves a configuration setting. |
DoEvents | This method processes events from the internal message queue. |
EvalPacket | This method evaluates the packet in SOAPPacket . |
HasXPath | This method determines whether a specific element exists in the document. |
Interrupt | This method interrupts the current method. |
Reset | This method resets the class. |
SendPacket | This method sends the packet. |
SendRequest | This method sends the request. |
TryXPath | This method navigates to the specified XPath if it exists. |
Value | This method returns the value of a parameter. |
Event List
The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.
Connected | This event is fired immediately after a connection completes (or fails). |
ConnectionStatus | This event is fired to indicate changes in the connection state. |
Disconnected | This event is fired when a connection is closed. |
EndTransfer | This event is fired when a document finishes transferring. |
Error | Fired when information is available about errors during data delivery. |
Header | This event is fired every time a header line comes in. |
Log | This event fires once for each log message. |
Redirect | This event is fired when a redirection is received from the server. |
SetCookie | This event is fired for every cookie set by the server. |
SSLServerAuthentication | Fired after the server presents its certificate to the client. |
SSLStatus | Fired when secure connection progress messages are available. |
StartTransfer | This event is fired when a document starts transferring (after the headers). |
Status | This event is fired when the HTTP status line is received from the server. |
Transfer | This event is fired while the response transfers. |
Config Settings
The following is a list of config settings for the class with short descriptions. Click on the links for further details.
EncodingStyleNamespacePrefix | The prefix to be used for the Encoding namespace. |
MethodAttributes | The attributes to include in the method element. |
MethodNamespacePrefix | The prefix to be used for the Method namespace. |
RequestPacket | The SOAP packet that was sent to the server during the last request. |
XSubTree | A snapshot of the current element in the document. |
AcceptEncoding | Used to tell the server which types of content encodings the client supports. |
AllowHTTPCompression | This property enables HTTP compression for receiving data. |
AllowHTTPFallback | Whether HTTP/2 connections are permitted to fallback to HTTP/1.1. |
Append | Whether to append data to LocalFile. |
Authorization | The Authorization string to be sent to the server. |
BytesTransferred | Contains the number of bytes transferred in the response data. |
ChunkSize | Specifies the chunk size in bytes when using chunked encoding. |
CompressHTTPRequest | Set to true to compress the body of a PUT or POST request. |
EncodeURL | If set to True the URL will be encoded by the class. |
FollowRedirects | Determines what happens when the server issues a redirect. |
GetOn302Redirect | If set to True the class will perform a GET on the new location. |
HTTP2HeadersWithoutIndexing | HTTP2 headers that should not update the dynamic header table with incremental indexing. |
HTTPVersion | The version of HTTP used by the class. |
IfModifiedSince | A date determining the maximum age of the desired document. |
KeepAlive | Determines whether the HTTP connection is closed after completion of the request. |
KerberosSPN | The Service Principal Name for the Kerberos Domain Controller. |
LogLevel | The level of detail that is logged. |
MaxRedirectAttempts | Limits the number of redirects that are followed in a request. |
NegotiatedHTTPVersion | The negotiated HTTP version. |
OtherHeaders | Other headers as determined by the user (optional). |
ProxyAuthorization | The authorization string to be sent to the proxy server. |
ProxyAuthScheme | The authorization scheme to be used for the proxy. |
ProxyPassword | A password if authentication is to be used for the proxy. |
ProxyPort | Port for the proxy server (default 80). |
ProxyServer | Name or IP address of a proxy server (optional). |
ProxyUser | A user name if authentication is to be used for the proxy. |
SentHeaders | The full set of headers as sent by the client. |
StatusCode | The status code of the last response from the server. |
StatusLine | The first line of the last response from the server. |
TransferredData | The contents of the last response from the server. |
TransferredDataLimit | The maximum number of incoming bytes to be stored by the class. |
TransferredHeaders | The full set of headers as received from the server. |
TransferredRequest | The full request as sent by the client. |
UseChunkedEncoding | Enables or Disables HTTP chunked encoding for transfers. |
UseIDNs | Whether to encode hostnames to internationalized domain names. |
UseProxyAutoConfigURL | Whether to use a Proxy auto-config file when attempting a connection. |
UserAgent | Information about the user agent (browser). |
ConnectionTimeout | Sets a separate timeout value for establishing a connection. |
FirewallAutoDetect | Tells the class whether or not to automatically detect and use firewall system settings, if available. |
FirewallHost | Name or IP address of firewall (optional). |
FirewallPassword | Password to be used if authentication is to be used when connecting through the firewall. |
FirewallPort | The TCP port for the FirewallHost;. |
FirewallType | Determines the type of firewall to connect through. |
FirewallUser | A user name if authentication is to be used connecting through a firewall. |
KeepAliveInterval | The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received. |
KeepAliveTime | The inactivity time in milliseconds before a TCP keep-alive packet is sent. |
Linger | When set to True, connections are terminated gracefully. |
LingerTime | Time in seconds to have the connection linger. |
LocalHost | The name of the local host through which connections are initiated or accepted. |
LocalPort | The port in the local host where the class binds. |
MaxLineLength | The maximum amount of data to accumulate when no EOL is found. |
MaxTransferRate | The transfer rate limit in bytes per second. |
ProxyExceptionsList | A semicolon separated list of hosts and IPs to bypass when using a proxy. |
TCPKeepAlive | Determines whether or not the keep alive socket option is enabled. |
TcpNoDelay | Whether or not to delay when sending packets. |
UseIPv6 | Whether to use IPv6. |
LogSSLPackets | Controls whether SSL packets are logged when using the internal security API. |
OpenSSLCADir | The path to a directory containing CA certificates. |
OpenSSLCAFile | Name of the file containing the list of CA's trusted by your application. |
OpenSSLCipherList | A string that controls the ciphers to be used by SSL. |
OpenSSLPrngSeedData | The data to seed the pseudo random number generator (PRNG). |
ReuseSSLSession | Determines if the SSL session is reused. |
SSLAcceptAnyServerCert | Whether to trust any certificate presented by the server. |
SSLCACerts | A newline separated list of CA certificate to be included when performing an SSL handshake. |
SSLCipherStrength | The minimum cipher strength used for bulk encryption. |
SSLClientCACerts | A newline separated list of CA certificates to use during SSL client certificate validation. |
SSLEnabledCipherSuites | The cipher suite to be used in an SSL negotiation. |
SSLEnabledProtocols | Used to enable/disable the supported security protocols. |
SSLEnableRenegotiation | Whether the renegotiation_info SSL extension is supported. |
SSLIncludeCertChain | Whether the entire certificate chain is included in the SSLServerAuthentication event. |
SSLKeyLogFile | The location of a file where per-session secrets are written for debugging purposes. |
SSLNegotiatedCipher | Returns the negotiated cipher suite. |
SSLNegotiatedCipherStrength | Returns the negotiated cipher suite strength. |
SSLNegotiatedCipherSuite | Returns the negotiated cipher suite. |
SSLNegotiatedKeyExchange | Returns the negotiated key exchange algorithm. |
SSLNegotiatedKeyExchangeStrength | Returns the negotiated key exchange algorithm strength. |
SSLNegotiatedVersion | Returns the negotiated protocol version. |
SSLSecurityFlags | Flags that control certificate verification. |
SSLServerCACerts | A newline separated list of CA certificates to use during SSL server certificate validation. |
TLS12SignatureAlgorithms | Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal. |
TLS12SupportedGroups | The supported groups for ECC. |
TLS13KeyShareGroups | The groups for which to pregenerate key shares. |
TLS13SignatureAlgorithms | The allowed certificate signature algorithms. |
TLS13SupportedGroups | The supported groups for (EC)DHE key exchange. |
AbsoluteTimeout | Determines whether timeouts are inactivity timeouts or absolute timeouts. |
FirewallData | Used to send extra data to the firewall. |
InBufferSize | The size in bytes of the incoming queue of the socket. |
OutBufferSize | The size in bytes of the outgoing queue of the socket. |
CacheContent | If true, the original XML is saved in a buffer. |
Charset | Specifies the charset used when encoding data. |
EOL | The characters to use for separating lines. |
ErrorOnEmptyAttr | If true, passing an invalid attribute to the Attr method will throw an exception. |
ExtraNameChars | Extra characters for the parser to consider as name characters. |
ExtraSpaceChars | Extra characters for the parser to consider as white space. |
FlushOnEOL | If set, the parser flushes its text buffer after every line of text. |
IgnoreBadAttributePrefixes | If true, bad (unknown) attribute prefixes are ignored. |
IgnoreBadElementPrefixes | If true, bad (unknown) element prefixes are ignored. |
IncludeElementPrefix | Whether to include the prefix in the element name. |
IncludeXMLDeclaration | Whether to include the XML declaration when writing XML. |
Indent | The characters to use for each indentation level. |
Offset | Current offset of the document being parsed. |
PreserveWhitespace | If true, leading and trailing whitespace in element text is preserved. |
QuoteChar | Quote character to use for attribute values. |
StringProcessingOptions | Defines options to use when processing string values. |
BuildInfo | Information about the product's build. |
CodePage | The system code page used for Unicode to Multibyte translations. |
LicenseInfo | Information about the current license. |
MaskSensitiveData | Whether sensitive data is masked in log messages. |
UseInternalSecurityAPI | Whether or not to use the system security libraries or an internal implementation. |
SOAP.Accept Property
This property includes a list of acceptable MIME types for the request.
Syntax
getAccept(): string; setAccept(accept: string): void;
Default Value
""
Remarks
If this property contains a nonempty string, an HTTP Accept header is added to the request.
The Accept header is used for content negotiation. It provides the server with a comma-separated list of MIME types that are acceptable for its response.
SOAP.ActionURI Property
This property includes the value of the SOAP-action header.
Syntax
getActionURI(): string; setActionURI(actionURI: string): void;
Default Value
""
Remarks
When the MethodURI or Method properties are set, the ActionURI property is automatically updated to MethodURI#Method.
SOAP.Authorization Property
This property includes the Authorization string to be sent to the server.
Syntax
getAuthorization(): string; setAuthorization(authorization: string): void;
Default Value
""
Remarks
If the Authorization property contains a nonempty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.
A common use for this property is to specify OAuth authorization string.
This property is provided so that the HTTP class can be extended with other security schemes in addition to the authorization schemes already implemented by the class.
The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".
SOAP.AuthScheme Property
This property specifies the authentication scheme to use when server authentication is required.
Syntax
getAuthScheme(): SOAPAuthSchemes; setAuthScheme(authScheme: SOAPAuthSchemes): void;
enum SOAPAuthSchemes { authBasic, authDigest, authProprietary, authNone, authNtlm, authNegotiate, authOAuth }
Default Value
0
Remarks
This property will tell the class which type of authorization to perform when the User and Password properties are set.
This property should be set to authNone (3) when no authentication is to be performed.
By default, this property is authBasic (0), and if the User and Password properties are set, the class will attempt HTTP Basic Authentication. If AuthScheme is set to authDigest (1), authNtlm (4), or authNegotiate (5), then Digest, NTLM, or Windows Negotiate (Kerberos) authentication will be attempted instead.
If AuthScheme is set to authProprietary (2), then the authorization token must be supplied through the Authorization property.
If AuthScheme is set to authOAuth (6), then the authorization string must be supplied through the Authorization property.
Note: If you set the Authorization property and AuthScheme is not authProprietary or authOAuth, then the AuthScheme will be set automatically to authProprietary (2) by the class.
For security, changing the value of this property will cause the class to clear the values of User, Password, and Authorization.
SOAP.Connected Property
This property shows whether the class is connected.
Syntax
isConnected(): boolean;
Default Value
FALSE
Remarks
This property is used to determine whether or not the class is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.
This property is read-only and not available at design time.
SOAP.ContentType Property
This property includes the content type for SOAP request data.
Syntax
getContentType(): string; setContentType(contentType: string): void;
Default Value
"text/xml"
Remarks
The default value for ContentType is "text/xml".
This property is not available at design time.
SOAP.Cookies Property
This property includes a collection of cookies.
Syntax
getCookies(): HTTPCookieList; setCookies(cookies: HTTPCookieList): void;
Default Value
Remarks
This property contains a collection of cookies. To add cookies to outgoing HTTP requests, add cookies (of type HTTPCookie) to this collection.
To see cookies that are set by the server, use the SetCookie event, which displays the cookies and their properties as set by the server. Those cookies also are added to Cookies.
MaxHTTPCookies can be used to control the maximum number of cookies saved.
This property is not available at design time.
Please refer to the HTTPCookie type for a complete list of fields.SOAP.FaultActor Property
This property includes the actor of any faults returned by the SOAP server.
Syntax
getFaultActor(): string;
Default Value
""
Remarks
FaultCode and FaultString provide the corresponding fault code and description.
This property is read-only.
SOAP.FaultCode Property
This property includes the code of any faults returned by the SOAP server.
Syntax
getFaultCode(): string;
Default Value
""
Remarks
FaultString and FaultActor provide the corresponding fault description and actor.
This property is read-only.
SOAP.FaultString Property
This property includes the textual description of any faults returned by the SOAP server.
Syntax
getFaultString(): string;
Default Value
""
Remarks
FaultCode and FaultActor provide the corresponding fault code and actor.
This property is read-only.
SOAP.Firewall Property
A set of properties related to firewall access.
Syntax
getFirewall(): Firewall; setFirewall(firewall: Firewall): void;
Default Value
Remarks
This is a Firewall-type property, which contains fields describing the firewall through which the class will attempt to connect.
Please refer to the Firewall type for a complete list of fields.SOAP.FollowRedirects Property
This property determines what happens when the server issues a redirect.
Syntax
getFollowRedirects(): SOAPFollowRedirects; setFollowRedirects(followRedirects: SOAPFollowRedirects): void;
enum SOAPFollowRedirects { frNever, frAlways, frSameScheme }
Default Value
0
Remarks
This property determines what happens when the server issues a redirect. Normally, the class returns an error if the server responds with an "Object Moved" message. If this property is set to frAlways (1), the new URL for the object is retrieved automatically every time.
If this property is set to frSameScheme (2), the new URL is retrieved automatically only if the URLScheme is the same; otherwise, the class .
Note: Following the HTTP specification, unless this property is set to frAlways (1), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.
Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty. If, however, this property is set to frAlways (1), the same credentials are used to connect to the new server.
A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).
The default value is frNever (0). In this case, redirects are never followed, and the class instead.
SOAP.Idle Property
This property specifies the current status of the class.
Syntax
isIdle(): boolean;
Default Value
TRUE
Remarks
Idle will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.
This property is read-only.
SOAP.IfModifiedSince Property
This property includes a date determining the maximum age of the desired document.
Syntax
getIfModifiedSince(): string; setIfModifiedSince(ifModifiedSince: string): void;
Default Value
""
Remarks
If this property contains a nonempty string, an If-Modified-Since HTTP header is added to the request. The value of this header is used to make the HTTP request conditional: If the requested documented has not been modified since the time specified in the field, a copy of the document will not be returned from the server; instead, a 304 (not modified) response will be returned by the server and the class
The format of the date value for IfModifiedSince is detailed in the HTTP specs. An example is Sat, 29 Oct 1994 19:43:31 GMT.
This property is not available at design time.
SOAP.LocalFile Property
This property includes the path to a local file for downloading. If the file exists, it is overwritten.
Syntax
getLocalFile(): string; setLocalFile(localFile: string): void;
Default Value
""
Remarks
This property is used when getting a document.
If this property is empty, then the received data are provided through TransferredData and the Transfer event.
SOAP.LocalHost Property
This property includes the name of the local host or user-assigned IP interface through which connections are initiated or accepted.
Syntax
getLocalHost(): string; setLocalHost(localHost: string): void;
Default Value
""
Remarks
The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.
In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.
If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).
Note: LocalHost is not persistent. You must always set it in code, and never in the property window.
SOAP.Method Property
This property includes the remote Method .
Syntax
getMethod(): string; setMethod(method: string): void;
Default Value
""
Remarks
When the MethodURI or Method properties are set, the ActionURI property is automatically updated to MethodURI#Method.
SOAP.MethodURI Property
This property includes the URI corresponding to the SOAP Method .
Syntax
getMethodURI(): string; setMethodURI(methodURI: string): void;
Default Value
""
Remarks
When the MethodURI or Method properties are set, the ActionURI property is automatically updated to MethodURI#Method.
SOAP.Namespaces Property
This property includes a collection of namespaces in the current stack.
Syntax
getNamespaces(): XMLNamespaceList; setNamespaces(namespaces: XMLNamespaceList): void;
Default Value
Remarks
This property contains a collection of XML namespaces, which are standards for providing uniquely named elements and attributes in an XML instance.
If the SOAP envelope URI is not found in the namespaces collection, it will be added with the prefix SOAP-ENV when generating a SOAP request. The SOAP envelope URI is 'http://schemas.xmlsoap.org/soap/envelope/'.
This property is not available at design time.
Please refer to the XMLNamespace type for a complete list of fields.SOAP.OtherHeaders Property
This property includes other headers as determined by the user (optional).
Syntax
getOtherHeaders(): string; setOtherHeaders(otherHeaders: string): void;
Default Value
""
Remarks
This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like ContentType and From.
The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by .
Use this property with caution. If this property contains invalid headers, HTTP requests may fail.
This property is useful for extending the functionality of the class beyond what is provided.
This property is not available at design time.
SOAP.Params Property
This property includes a collection of parameters for the SOAP Method .
Syntax
getParams(): SOAPParamList; setParams(params: SOAPParamList): void;
Default Value
0
Remarks
When using SendRequest, this property can be populated with the parameters to include in the request to the SOAP Method.
When receiving SOAP responses from the server, the component parses the response envelope parameters into the collection.
This property is not available at design time.
Please refer to the SOAPParam type for a complete list of fields.SOAP.ParsedHeaders Property
This property includes a collection of headers returned from the last request.
Syntax
getParsedHeaders(): HeaderList;
Default Value
Remarks
This property contains a collection of headers returned from the last request. Whenever headers are returned from the server, the headers are parsed into a collection of headers. Each Header in this collection contains information describing that header.
MaxHeaders can be used to control the maximum number of headers saved.
This property is read-only and not available at design time.
Please refer to the Header type for a complete list of fields.SOAP.Password Property
This property includes a password if authentication is to be used.
Syntax
getPassword(): string; setPassword(password: string): void;
Default Value
""
Remarks
This property contains a password if authentication is to be used. If AuthScheme is set to HTTP Basic Authentication, the User and Password are Base64 encoded and the result is put in the Authorization configuration setting in the form "Basic [encoded-user-password]".
If AuthScheme is set to HTTP Digest Authentication, the User and Password properties are used to respond to the HTTP Digest Authentication challenge from the server.
If AuthScheme is set to NTLM, NTLM authentication will be attempted. If AuthScheme is set to NTLM and User and Password are empty, the class will attempt to authenticate using the current user's credentials.
SOAP.Pragma Property
This property includes a browser- or server-specific header line (optional).
Syntax
getPragma(): string; setPragma(pragma: string): void;
Default Value
""
Remarks
If this property contains a nonempty string, a Pragma HTTP request header is added to the request. The meaning of the header depends on the implementation. It can be used to send or receive proprietary information to or from the server.
This property is not available at design time.
SOAP.Proxy Property
A set of properties related to proxy access.
Syntax
getProxy(): Proxy; setProxy(proxy: Proxy): void;
Default Value
Remarks
This property contains fields describing the proxy through which the class will attempt to connect.
Please refer to the Proxy type for a complete list of fields.SOAP.Referer Property
This property includes the referer URL/document (optional).
Syntax
getReferer(): string; setReferer(referer: string): void;
Default Value
""
Remarks
If this property contains a nonempty string, a Referer HTTP request header is added to the request. The purpose of the header is to show the document referring the requested URL.
This property is not available at design time.
SOAP.ReturnValue Property
This property includes the value returned by the SOAP Method .
Syntax
getReturnValue(): string;
Default Value
""
Remarks
ReturnValue corresponds to the first item in the Params properties.
This property is read-only.
SOAP.SOAPEncoding Property
This property includes the type of SOAP encoding used for SOAP requests.
Syntax
getSOAPEncoding(): string; setSOAPEncoding(SOAPEncoding: string): void;
Default Value
"http://schemas.xmlsoap.org/soap/encoding/"
Remarks
This is the value of the encodingStyle attribute of the SOAP envelope.
SOAP.SOAPHeader Property
This property includes the contents of the optional SOAP header sent to the server.
Syntax
getSOAPHeader(): string; setSOAPHeader(SOAPHeader: string): void;
Default Value
""
Remarks
This property is used only when building SOAP requests.
This property is not available at design time.
SOAP.SOAPPacket Property
This property includes the full contents of the SOAP packet.
Syntax
getSOAPPacket(): string; setSOAPPacket(SOAPPacket: string): void;
Default Value
""
Remarks
The SOAPPacket property contains the contents of the SOAP packet created by the component before submitting a request as well as the full, unmodified contents of the SOAP response as received from the server after the request.
This property is not available at design time.
SOAP.SSLAcceptServerCert Property
This property instructs the class to unconditionally accept the server certificate that matches the supplied certificate.
Syntax
getSSLAcceptServerCert(): Certificate; setSSLAcceptServerCert(SSLAcceptServerCert: Certificate): void;
Default Value
Remarks
If it finds any issues with the certificate presented by the server, the class will normally terminate the connection with an error.
You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.
Note: This functionality is provided only for cases in which you otherwise know that you are communicating with the right server. If used improperly, this property may create a security breach. Use it at your own risk.
Please refer to the Certificate type for a complete list of fields.SOAP.SSLCert Property
This property includes the certificate to be used during Secure Sockets Layer (SSL) negotiation.
Syntax
getSSLCert(): Certificate; setSSLCert(SSLCert: Certificate): void;
Default Value
Remarks
This property includes the digital certificate that the class will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the field to the encoded certificate. To select a certificate, use the store and subject fields.
Please refer to the Certificate type for a complete list of fields.SOAP.SSLProvider Property
This property specifies the Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.
Syntax
getSSLProvider(): SOAPSSLProviders; setSSLProvider(SSLProvider: SOAPSSLProviders): void;
enum SOAPSSLProviders { sslpAutomatic, sslpPlatform, sslpInternal }
Default Value
0
Remarks
This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.
Possible values are as follows:
0 (sslpAutomatic - default) | Automatically selects the appropriate implementation. |
1 (sslpPlatform) | Uses the platform/system implementation. |
2 (sslpInternal) | Uses the internal implementation. |
In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.
When Automatic is selected, the platform implementation will be used by default in all cases in the JavaScript edition.
Note: The internal provider is not support at this time.
SOAP.SSLServerCert Property
This property includes the server certificate for the last established connection.
Syntax
getSSLServerCert(): Certificate;
Default Value
Remarks
SSLServerCert contains the server certificate for the last established connection.
SSLServerCert is reset every time a new connection is attempted.
This property is read-only.
Please refer to the Certificate type for a complete list of fields.SOAP.StatusLine Property
This property is the first line of the last server response.
Syntax
getStatusLine(): string;
Default Value
""
Remarks
This property contains the first line of the last server response. This value can be used for diagnostic purposes. If an HTTP error is returned when calling a method of the class, the error string is the same as the StatusLine property.
The HTTP protocol specifies the structure of the StatusLine as follows: [HTTP version] [Result Code] [Description].
This property is read-only and not available at design time.
SOAP.Timeout Property
This property includes the timeout for the class.
Syntax
getTimeout(): number; setTimeout(timeout: number): void;
Default Value
60
Remarks
If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.
If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.
The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.
If Timeout expires, and the operation is not yet complete, the class .
Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.
The default value for the Timeout property is 60 seconds.
SOAP.TransferredData Property
This property includes the contents of the last response from the server.
Syntax
getTransferredData(): Uint8Array;
Default Value
""
Remarks
This property contains the contents of the last response from the server. If the LocalFile is empty, the data are accumulated in TransferredData and also can be received in the Transfer event. Otherwise, this property returns an empty string.
TransferredDataLimit controls the maximum amount of data accumulated in TransferredData (by default there is no limit).
This property is read-only and not available at design time.
SOAP.TransferredDataLimit Property
This property specifies the maximum amount of data to be transferred.
Syntax
getTransferredDataLimit(): number; setTransferredDataLimit(transferredDataLimit: number): void;
Default Value
0
Remarks
This property contains the maximum amount of data to be transferred. The default value is 0, which will not impose any limits on the amount of data accumulated in the TransferredData property.
SOAP.TransferredHeaders Property
This property includes the full set of headers as received from the server.
Syntax
getTransferredHeaders(): string;
Default Value
""
Remarks
This property returns the complete set of raw headers as received from the server.
The Header event shows the individual headers as parsed by the class.
This property is read-only and not available at design time.
SOAP.URL Property
This property specifies the URL to retrieve.
Syntax
getURL(): string; setURL(URL: string): void;
Default Value
""
Remarks
This property contains the URL of the document. This value is parsed, and the results are put in the URLScheme, URLServer, URLPort, and URLPath properties.
SOAP.User Property
This property includes a user name if authentication is to be used.
Syntax
getUser(): string; setUser(user: string): void;
Default Value
""
Remarks
This property contains a user name if authentication is to be used. If AuthScheme is set to HTTP Basic Authentication, The User and Password are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".
If AuthScheme is set to HTTP Digest Authentication, the User and Password properties are used to respond to the HTTP Digest Authentication challenge from the server.
If AuthScheme is set to NTLM, NTLM authentication will be attempted. If AuthScheme is set to NTLM, and User and Password are empty, the class will attempt to authenticate using the current user's credentials.
SOAP.ValueFormat Property
This property includes the format of data returned or set.
Syntax
getValueFormat(): SOAPValueFormats; setValueFormat(valueFormat: SOAPValueFormats): void;
enum SOAPValueFormats { vfText, vfXML, vfFullXML }
Default Value
1
Remarks
The ValueFormat property specifies the format of the data set or received into/from value properties, such as XText, ReturnValue, and the Params properties.
The following are the possible values:
vfText (0) | Textual data. Any '<', '>', and '&' characters are escaped to '<', '>', and '&'. |
vfXML (1) | XML data, not including the enclosing element tags. No escaping is performed for the XML data, but element data (such as element attributes) will be escaped. |
vfFullXML (2) | Same as vfXML, but including the enclosing element. No escaping is performed for the XML data or for the XML element. |
SOAP.XAttributes Property
This property includes a collection of attributes of the current element.
Syntax
getXAttributes(): XMLAttributeList;
Default Value
Remarks
This collection consists of all attributes of the current XML element. The component parses each attribute into a collection of XMLAttribute types.
This property is read-only and not available at design time.
Please refer to the XMLAttribute type for a complete list of fields.SOAP.XChildren Property
This property includes the collection of child elements for the current element.
Syntax
getXChildren(): XMLElementList;
Default Value
Remarks
These elements are provided in the collection in the same order they are found in the document.
This property is read-only and not available at design time.
Please refer to the XMLElement type for a complete list of fields.SOAP.XElement Property
This property includes the name of the element pointed to by XPath .
Syntax
getXElement(): string;
Default Value
""
Remarks
The corresponding prefix is provided by XPrefix.
This property is read-only.
SOAP.XNamespace Property
This property includes the namespace of the element pointed to by XPath .
Syntax
getXNamespace(): string;
Default Value
""
Remarks
The corresponding namespace prefix is provided by XPrefix.
This property is read-only.
SOAP.XParent Property
This property includes the parent of the element pointed to by XPath .
Syntax
getXParent(): string;
Default Value
""
Remarks
If XPath points to the top element, XParent is an empty string.
This property is read-only.
SOAP.XPath Property
This property includes a path into the SOAPPacket received by the server.
Syntax
getXPath(): string; setXPath(XPath: string): void;
Default Value
""
Remarks
The syntax is a subset of the XPath language.
Use this property to look at details of the SOAPPacket received by the server.
SOAP.XPrefix Property
This property includes the prefix of the element pointed to by XPath .
Syntax
getXPrefix(): string;
Default Value
""
Remarks
The corresponding element name is provided by XElement.
This property is read-only.
SOAP.XText Property
This property includes the text of the element pointed to by XPath .
Syntax
getXText(): string;
Default Value
""
Remarks
The ValueFormat property controls the format in which the value is returned.
This property is read-only.
SOAP.addCookie Method
This method adds a cookie and the corresponding value to the outgoing request headers.
Syntax
async soap.addCookie(cookieName : string, cookieValue : string): Promise<void>
Remarks
This property adds a cookie and the corresponding value to the outgoing request headers. Please refer to the Cookies property for more information on cookies and how they are managed.
SOAP.addNamespace Method
This method adds a namespace to the Namespaces properties.
Syntax
async soap.addNamespace(prefix : string, namespaceURI : string): Promise<void>
Remarks
Prefix specifies the namespace prefix, and NamespaceURI specifies the namespace.
SOAP.addParam Method
This method adds a parameter-value pair.
Syntax
async soap.addParam(paramName : string, paramValue : string): Promise<void>
Remarks
Please refer to the parameter name and value provided in the Params properties for more information on SOAP parameters and how they are managed.
Example 1. Send SOAP Request:
SOAPControl.Reset()
SOAPControl.AddParam("paramname", "paramvalue")
SOAPControl.AddParam("paramname", "paramvalue")
SOAPControl.MethodURI = "methoduri"
SOAPControl.Method = "methodname"
SOAPControl.URL = "endpointURL"
SOAPControl.SendRequest()
Example 3. Send SOAP Request Using Param Arrays:
SOAPControl.Reset()
SOAPControl.ParamCount = 2
SOAPControl.ParamName(0) = "paramname"
SOAPControl.ParamValue(0) = "paramvalue"
SOAPControl.ParamName(1) = "paramname2"
SOAPControl.ParamValue(1) = "paramvalue2"
SOAPControl.ParamAttrs(1) = "customattr=value"
SOAPControl.MethodURI = "methoduri"
SOAPControl.Method = "methodname"
SOAPControl.URL = "endpointURL"
SOAPControl.SendRequest()
SOAP.attr Method
This method returns the value of the specified attribute.
Syntax
async soap.attr(attrName : string): Promise<string>
Remarks
If the attribute does not exist, an empty string is returned if ErrorOnEmptyAttr is set to False; otherwise, an exception is thrown.
Please refer to the XAttributes properties for more information.
SOAP.buildPacket Method
This method builds the request packet.
Syntax
async soap.buildPacket(): Promise<void>
Remarks
The resulting packet is placed in SOAPPacket.
SOAP.config Method
Sets or retrieves a configuration setting.
Syntax
async soap.config(configurationString : string): Promise<string>
Remarks
Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
SOAP.doEvents Method
This method processes events from the internal message queue.
Syntax
async soap.doEvents(): Promise<void>
Remarks
When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.
SOAP.evalPacket Method
This method evaluates the packet in SOAPPacket .
Syntax
async soap.evalPacket(): Promise<void>
Remarks
Use this method to evaluate SOAP packets received through other means (i.e., not directly through the class).
SOAP.hasXPath Method
This method determines whether a specific element exists in the document.
Syntax
async soap.hasXPath(XPath : string): Promise<boolean>
Remarks
This method determines whether a particular XPath exists within the document. This may be used to check if a path exists before setting it through XPath.
This method returns True if the xpath exists, and False if not.
See XPath for details on the XPath syntax.
SOAP.interrupt Method
This method interrupts the current method.
Syntax
async soap.interrupt(): Promise<void>
Remarks
If there is no method in progress, Interrupt simply returns, doing nothing.
SOAP.reset Method
This method resets the class.
Syntax
async soap.reset(): Promise<void>
Remarks
Calling this method also resets all HTTP headers to their default values.
SOAP.sendPacket Method
This method sends the packet.
Syntax
async soap.sendPacket(): Promise<void>
Remarks
This method may also be used to send a packet placed in SOAPPacket.
Example. Send SOAP Request:
SOAPControl.Reset()
SOAPControl.AddParam("paramname", "paramvalue")
SOAPControl.AddParam("paramname", "paramvalue")
SOAPControl.MethodURI = "methoduri"
SOAPControl.Method = "methodname"
SOAPControl.URL = "endpointURL"
SOAPControl.BuildPacket()
SOAPControl.SendPacket()
SOAPControl.EvalPacket()
SOAP.sendRequest Method
This method sends the request.
Syntax
async soap.sendRequest(): Promise<void>
Remarks
Calling this method is equivalent to calling BuildPacket, SendPacket, and EvalPacket in succession.
Example. Send SOAP Request:
SOAPControl.Reset()
SOAPControl.AddParam("paramname", "paramvalue")
SOAPControl.AddParam("paramname", "paramvalue")
SOAPControl.MethodURI = "methoduri"
SOAPControl.Method = "methodname"
SOAPControl.URL = "endpointURL"
SOAPControl.SendRequest()
SOAP.tryXPath Method
This method navigates to the specified XPath if it exists.
Syntax
async soap.tryXPath(xpath : string): Promise<boolean>
Remarks
This method will attempt to navigate to the specified XPath parameter if it exists within the document.
If the XPath exists, the XPath property will be updated and this method returns True.
If the XPath does not exist, the XPath property is not updated and this method returns False.
SOAP.value Method
This method returns the value of a parameter.
Syntax
async soap.value(paramName : string): Promise<string>
Remarks
The class will search through the Params properties for the parameter identified by ParamName and will return the value associated with it provided in the properties.
SOAP.Connected Event
This event is fired immediately after a connection completes (or fails).
Syntax
soap.on('Connected', listener: (e: {readonly statusCode: number, readonly description: string}) => void )
Remarks
If the connection is made normally, StatusCode is 0 and Description is "OK".
If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.
Please refer to the Error Codes section for more information.
SOAP.ConnectionStatus Event
This event is fired to indicate changes in the connection state.
Syntax
soap.on('ConnectionStatus', listener: (e: {readonly connectionEvent: string, readonly statusCode: number, readonly description: string}) => void )
Remarks
The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.
The ConnectionEvent parameter indicates the type of connection event. Values may include the following:
Firewall connection complete. | |
Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable). | |
Remote host connection complete. | |
Remote host disconnected. | |
SSL or S/Shell connection broken. | |
Firewall host disconnected. |
SOAP.Disconnected Event
This event is fired when a connection is closed.
Syntax
soap.on('Disconnected', listener: (e: {readonly statusCode: number, readonly description: string}) => void )
Remarks
If the connection is broken normally, StatusCode is 0 and Description is "OK".
If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.
Please refer to the Error Codes section for more information.
SOAP.EndTransfer Event
This event is fired when a document finishes transferring.
Syntax
soap.on('EndTransfer', listener: (e: {readonly direction: number}) => void )
Remarks
The EndTransfer event is fired when the document text finishes transferring from the server to the local host.
The Direction parameter shows whether the client (0) or the server (1) is sending the data.
SOAP.Error Event
Fired when information is available about errors during data delivery.
Syntax
soap.on('Error', listener: (e: {readonly errorCode: number, readonly description: string}) => void )
Remarks
The Error event is fired in case of exceptional conditions during message processing. Normally the class .
The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.
SOAP.Header Event
This event is fired every time a header line comes in.
Syntax
soap.on('Header', listener: (e: {readonly field: string, readonly value: string}) => void )
Remarks
The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.
If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).
SOAP.Log Event
This event fires once for each log message.
Syntax
soap.on('Log', listener: (e: {readonly logLevel: number, readonly message: string, readonly logType: string}) => void )
Remarks
This event fires once for each log message generated by the class. The verbosity is controlled by the LogLevel setting.
LogLevel indicates the level of message. Possible values are as follows:
0 (None) | No events are logged. |
1 (Info - default) | Informational events are logged. |
2 (Verbose) | Detailed data are logged. |
3 (Debug) | Debug data are logged. |
The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.
The value 2 (Verbose) logs additional information about the request and response.
The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).
Message is the log entry.
LogType identifies the type of log entry. Possible values are as follows:
- "Info"
- "RequestHeaders"
- "ResponseHeaders"
- "RequestBody"
- "ResponseBody"
- "ProxyRequest"
- "ProxyResponse"
- "FirewallRequest"
- "FirewallResponse"
SOAP.Redirect Event
This event is fired when a redirection is received from the server.
Syntax
soap.on('Redirect', listener: (e: {readonly location: string, accept: boolean}) => void )
Remarks
This event is fired in cases in which the client can decide whether or not to continue with the redirection process. The Accept parameter is always True by default, but if you do not want to follow the redirection, Accept may be set to False, in which case the class . Location is the location to which the client is being redirected. Further control over redirection is provided in the FollowRedirects property.
SOAP.SetCookie Event
This event is fired for every cookie set by the server.
Syntax
soap.on('SetCookie', listener: (e: {readonly name: string, readonly value: string, readonly expires: string, readonly domain: string, readonly path: string, readonly secure: boolean}) => void )
Remarks
The SetCookie event is fired for every Set-Cookie: header received from the HTTP server.
The Name parameter contains the name of the cookie, with the corresponding value supplied in the Value parameter.
The Expires parameter contains an expiration time for the cookie (if provided by the server). The time format used is "Weekday, DD-Mon-YY HH:MM:SS GMT". If the server does not provide an expiration time, the Expires parameter will be an empty string. In this case, the convention is to drop the cookie at the end of the session.
The Domain parameter contains a domain name to limit the cookie to (if provided by the server). If the server does not provide a domain name, the Domain parameter will be an empty string. The convention in this case is to use the server specified in the URL (URLServer) as the cookie domain.
The Path parameter contains a path name to limit the cookie to (if provided by the server). If the server does not provide a cookie path, the Path parameter will be an empty string. The convention in this case is to use the path specified in the URL (URLPath) as the cookie path.
The Secure parameter specifies whether the cookie is secure. If the value of this parameter is True, the cookie value must be submitted only through a secure (HTTPS) connection.
SOAP.SSLServerAuthentication Event
Fired after the server presents its certificate to the client.
Syntax
soap.on('SSLServerAuthentication', listener: (e: {readonly certEncoded: string, readonly certEncodedB: Uint8Array, readonly certSubject: string, readonly certIssuer: string, readonly status: string, accept: boolean}) => void )
Remarks
This event fires with information about the server certificate. The Status property shows why verification failed (otherwise, Status contains the string OK). To manually accept an untrusted certificate, the SSLAcceptAnyServerCert setting must be set to True before initiating the connection.
SOAP.SSLStatus Event
Fired when secure connection progress messages are available.
Syntax
soap.on('SSLStatus', listener: (e: {readonly message: string}) => void )
Remarks
The event is fired for informational and logging purposes only. This event tracks the progress of the connection.
SOAP.StartTransfer Event
This event is fired when a document starts transferring (after the headers).
Syntax
soap.on('StartTransfer', listener: (e: {readonly direction: number}) => void )
Remarks
The StartTransfer event is fired when the document text starts transferring from the server to the local host.
The Direction parameter shows whether the client (0) or the server (1) is sending the data.
SOAP.Status Event
This event is fired when the HTTP status line is received from the server.
Syntax
soap.on('Status', listener: (e: {readonly HTTPVersion: string, readonly statusCode: number, readonly description: string}) => void )
Remarks
HTTPVersion is a string containing the HTTP version string as returned from the server (e.g., "1.1").
StatusCode contains the HTTP status code (e.g., 200), and Description the associated message returned by the server (e.g., "OK").
SOAP.Transfer Event
This event is fired while the response transfers.
Syntax
soap.on('Transfer', listener: (e: {readonly direction: number, readonly bytesTransferred: number, readonly percentDone: number}) => void )
Remarks
The BytesTransferred parameter contains the number of bytes transferred since the beginning of the response (excluding HTTP response headers).
The Direction parameter shows whether the client (0) or the server (1) is sending the data.
The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.
Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.
Certificate Type
This is the digital certificate being used.
Remarks
This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.
Fields
EffectiveDate
string (read-only)
Default Value: ""
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
ExpirationDate
string (read-only)
Default Value: ""
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
ExtendedKeyUsage
string (read-only)
Default Value: ""
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
Fingerprint
string (read-only)
Default Value: ""
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
FingerprintSHA1
string (read-only)
Default Value: ""
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
FingerprintSHA256
string (read-only)
Default Value: ""
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
Issuer
string (read-only)
Default Value: ""
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
KeyPassword
string
Default Value: ""
This is the password for the certificate's private key (if any).
Some certificate stores may individually protect certificates' private keys, separate from the standard protection offered by the . . This field can be used to read such password-protected private keys.
Note: this property defaults to the value of . To clear it, you must set the property to the empty string (""). It can be set at any time, but when the private key's password is different from the store's password, then it must be set before calling .
PrivateKey
string (read-only)
Default Value: ""
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The may be available but not exportable. In this case, returns an empty string.
PrivateKeyAvailable
boolean (read-only)
Default Value: False
This property shows whether a is available for the selected certificate. If is True, the certificate may be used for authentication purposes (e.g., server authentication).
PrivateKeyContainer
string (read-only)
Default Value: ""
This is the name of the container for the certificate (if available). This functionality is available only on Windows platforms.
PublicKey
string (read-only)
Default Value: ""
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
PublicKeyAlgorithm
string (read-only)
Default Value: ""
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
PublicKeyLength
number (read-only)
Default Value: 0
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
SerialNumber
string (read-only)
Default Value: ""
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
SignatureAlgorithm
string (read-only)
Default Value: ""
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
Store
string
Default Value: "MY"
This is the name of the certificate store for the client certificate.
The property denotes the type of the certificate store specified by . If the store is password protected, specify the password in .
is used in conjunction with the property to specify client certificates. If has a value, and or is set, a search for a certificate is initiated. Please see the property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
StoreB
Uint8Array
Default Value: "MY"
This is the name of the certificate store for the client certificate.
The property denotes the type of the certificate store specified by . If the store is password protected, specify the password in .
is used in conjunction with the property to specify client certificates. If has a value, and or is set, a search for a certificate is initiated. Please see the property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
StorePassword
string
Default Value: ""
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
StoreType
CertStoreTypes
Default Value: 0
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the and set to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
SubjectAltNames
string (read-only)
Default Value: ""
This property contains comma-separated lists of alternative subject names for the certificate.
ThumbprintMD5
string (read-only)
Default Value: ""
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
ThumbprintSHA1
string (read-only)
Default Value: ""
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
ThumbprintSHA256
string (read-only)
Default Value: ""
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
Usage
string (read-only)
Default Value: ""
This property contains the text description of .
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
UsageFlags
number (read-only)
Default Value: 0
This property contains the flags that show intended use for the certificate. The value of is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the property for a text representation of .
This functionality currently is not available when the provider is OpenSSL.
Version
string (read-only)
Default Value: ""
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
Subject
string
Default Value: ""
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
Encoded
string
Default Value: ""
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The and properties also may be used to specify a certificate.
When is set, a search is initiated in the current for the private key of the certificate. If the key is found, is updated to reflect the full subject of the selected certificate; otherwise, is set to an empty string.
EncodedB
Uint8Array
Default Value: ""
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The and properties also may be used to specify a certificate.
When is set, a search is initiated in the current for the private key of the certificate. If the key is found, is updated to reflect the full subject of the selected certificate; otherwise, is set to an empty string.
Constructors
public Certificate();
Creates a Certificate instance whose properties can be set. This is useful for use with CERTMGR when generating new certificates.
public Certificate(String certificateFile);
Opens CertificateFile and reads out the contents as an X.509 public key.
public Certificate(byte[] encoded);
Parses Encoded as an X.509 public key.
public Certificate(int storeType, String store, String storePassword, String subject);
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.
public Certificate(int storeType, String store, String storePassword, String subject, String configurationString);
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. ConfigurationString is a newline separated list of name-value pairs that may be used to modify the default behavior. Possible values include "PersistPFXKey", which shows whether or not the PFX key is persisted after performing operations with the private key. This correlates to the PKCS12_NO_PERSIST_KEY CryptoAPI option. The default value is True (the key is persisted). "Thumbprint" - an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load. When specified, this value is used to select the certificate in the store. This is applicable to cstUser, cstMachine, cstPublicKeyFile, and cstPFXFile store types. "UseInternalSecurityAPI" shows whether the platform (default) or the internal security API is used when performing certificate-related operations. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.
public Certificate(int storeType, String store, String storePassword, byte[] encoded);
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.
public Certificate(int storeType, byte[] store, String storePassword, String subject);
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or Base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.
public Certificate(int storeType, byte[] store, String storePassword, String subject, String configurationString);
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or Base64-encoded) containing the certificate data. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X.509 certificate's subject Distinguished Name (DN). The Subject parameter can also take an MD5, SHA-1, or SHA-256 thumbprint of the certificate to load in a "Thumbprint=value" format.
public Certificate(int storeType, byte[] store, String storePassword, byte[] encoded);
CertStoreType identifies the type of certificate store to use. See StoreType for descriptions of the different certificate stores. Store is a string (binary- or Base64-encoded) containing the certificate store. StorePassword is the password used to protect the store. After the store has been successfully opened, the class will load Encoded as an X.509 certificate and search the opened store for a corresponding private key.
Firewall Type
The firewall the class will connect through.
Remarks
When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall and the .
Fields
AutoDetect
boolean
Default Value: False
This property tells the class whether or not to automatically detect and use firewall system settings, if available.
FirewallType
FirewallTypes
Default Value: 0
This property determines the type of firewall to connect through. The applicable values are as follows:
Host
string
Default Value: ""
This property contains the name or IP address of the firewall (optional). If a is given, the requested connections will be authenticated through the specified firewall when connecting.
If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class .
Password
string
Default Value: ""
This property contains a password if authentication is to be used when connecting through the firewall. If is specified, the and properties are used to connect and authenticate to the given firewall. If the authentication fails, the class .
Port
number
Default Value: 0
This property contains the Transmission Control Protocol (TCP) port for the firewall . See the description of the property for details.
Note: This property is set automatically when is set to a valid value. See the description of the property for details.
User
string
Default Value: ""
This property contains a username if authentication is to be used when connecting through a firewall. If is specified, this property and the property are used to connect and authenticate to the given Firewall. If the authentication fails, the class .
Constructors
public Firewall();
Header Type
This is an HTTP header as it is received from the server.
Remarks
When a header is received through a Header event, it is parsed into a Header type. This type contains a , and its corresponding .
Fields
Field
string
Default Value: ""
This property contains the name of the HTTP Header (this is the same case as it is delivered).
Value
string
Default Value: ""
This property contains the Header contents.
Constructors
public Header();
public Header(String field, String value);
HTTPCookie Type
An HTTP cookie can be either sent to or received from the server.
Remarks
An HTTP cookie can store the cookies that are to be sent to the server. It also may store the cookies sent by the server.
Cookies that are to be sent to the server must have the and fields supplied before submitting the URL. When the SetCookie event is fired, however, all of the fields of an HTTPCookie are filled out accordingly.
Fields
Domain
string (read-only)
Default Value: ""
This is the domain of a received cookie. This property contains a domain name to limit the cookie to (if provided by the server). If the server does not provide a domain name, this property will contain an empty string. The convention in this case is to use the server name specified by URLServer as the cookie domain.
Expiration
string (read-only)
Default Value: ""
This property contains an expiration time for the cookie (if provided by the server). The time format used is "Weekday, DD-Mon-YY HH:MM:SS GMT". If the server does not provide an expiration time, this property will contain an empty string. The convention is to drop the cookie at the end of the session.
Name
string
Default Value: ""
This property, contains the name of the cookie.
This property, along with , stores the cookie that is to be sent to the server. The SetCookie event displays the cookies sent by the server and their properties.
Path
string (read-only)
Default Value: ""
This property contains a path name to limit the cookie to (if provided by the server). If the server does not provide a cookie path, the path property will be an empty string. The convention in this case is to use the path specified by URLPath as the cookie path.
Secure
boolean (read-only)
Default Value: False
This property contains the security flag of the received cookie. This property specifies whether the cookie is secure. If the value of this property is True, the cookie value must be submitted only through a secure (HTTPS) connection.
Value
string
Default Value: ""
This property contains the value of the cookie. A corresponding value is associated with the cookie specified by . This property holds that value.
The SetCookie event provides the cookies set by the server.
Constructors
public HTTPCookie();
public HTTPCookie(String name, String value);
Proxy Type
The proxy the class will connect to.
Remarks
When connecting through a proxy, this type is used to specify different properties of the proxy, such as the and the .
Fields
AuthScheme
ProxyAuthSchemes
Default Value: 0
This property is used to tell the class which type of authorization to perform when connecting to the proxy. This is used only when the and properties are set.
should be set to authNone (3) when no authentication is expected.
By default, is authBasic (0), and if the and properties are set, the component will attempt basic authentication.
If is set to authDigest (1), digest authentication will be attempted instead.
If is set to authProprietary (2), then the authorization token will not be generated by the class. Look at the configuration file for the class being used to find more information about manually setting this token.
If is set to authNtlm (4), NTLM authentication will be used.
For security reasons, setting this property will clear the values of and .
AutoDetect
boolean
Default Value: False
This property tells the class whether or not to automatically detect and use proxy system settings, if available. The default value is false.
Password
string
Default Value: ""
This property contains a password if authentication is to be used for the proxy.
If is set to Basic Authentication, the and properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].
If is set to Digest Authentication, the and properties are used to respond to the Digest Authentication challenge from the server.
If is set to NTLM Authentication, the and properties are used to authenticate through NTLM negotiation.
Port
number
Default Value: 80
This property contains the Transmission Control Protocol (TCP) port for the proxy (default 80). See the description of the property for details.
Server
string
Default Value: ""
If a proxy is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.
If the property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the property is set to the corresponding address. If the search is not successful, an error is returned.
SSL
ProxySSLTypes
Default Value: 0
This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:
psAutomatic (0) | Default setting. If the URL is an https URL, the class will use the psTunnel option. If the URL is an http URL, the class will use the psNever option. |
psAlways (1) | The connection is always SSL-enabled. |
psNever (2) | The connection is not SSL-enabled. |
psTunnel (3) | The connection is made through a tunneling (HTTP) proxy. |
User
string
Default Value: ""
This property contains a username if authentication is to be used for the proxy.
If is set to Basic Authentication, the and properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].
If is set to Digest Authentication, the and properties are used to respond to the Digest Authentication challenge from the server.
If is set to NTLM Authentication, the and properties are used to authenticate through NTLM negotiation.
Constructors
public Proxy();
public Proxy(String server, int port);
public Proxy(String server, int port, String user, String password);
SOAPParam Type
This type describes a parameter for the SOAP Method .
Remarks
This type describes a parameter of the SOAP Method. SOAPParam has fields to describe the name, value, and any attributes of the parameter being described.
Fields
Attrs
string
Default Value: ""
This property contains the extra attributes for the parameter.
Name
string
Default Value: ""
This property contains the name of the Method parameter.
Value
string
Default Value: ""
This property contains the value of the Method parameter.
Constructors
public SOAPParam();
public SOAPParam(String name, String value);
XMLAttribute Type
This type describes an XML attribute from the current XML element.
Remarks
This type describes an XML attribute from the current element. It includes fields to denote information about the attribute being defined.
Fields
Name
string (read-only)
Default Value: ""
The provides the local name (without prefix) of the attribute.
Namespace
string (read-only)
Default Value: ""
This property contains the attribute namespace.
Prefix
string (read-only)
Default Value: ""
This property contains the attribute prefix (if any). If the attribute does not have a prefix, this property is empty.
Value
string (read-only)
Default Value: ""
This property contains the attribute value.
Constructors
public XMLAttribute();
XMLElement Type
This type describes an element contained within the XML document.
Remarks
This type describes an XML element. The fields for this type describe the element , , and of the given element.
The elements are inserted into the array in the same order they are found in the document.
Fields
Name
string (read-only)
Default Value: ""
The property provides the local name (without a prefix) of the element.
Namespace
string (read-only)
Default Value: ""
This property contains the namespace of the element.
Prefix
string (read-only)
Default Value: ""
This property contains the prefix of the element (if any). If the element does not have a prefix, this property is empty.
XText
string (read-only)
Default Value: ""
This property contains the inner text of the element.
Constructors
public XMLElement();
XMLNamespace Type
This type describes an XML namespace from the current namespace stack.
Remarks
This type describes an XML namespace from the current stack. It includes fields to denote the and the of the namespace being defined.
The default namespace exists at index 0. The field at index 0 is xmlns, and the field contains the default namespace.
Fields
Prefix
string
Default Value: ""
URI
string
Default Value: ""
This property contains the namespace URI associated with the corresponding . This URL is usually pointing to the XML schema for the namespace.
Constructors
public XMLNamespace();
public XMLNamespace(String URI, String prefix);
Config Settings (class ipworks.soap)
The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.SOAP Config Settings
SOAP1.Config("MethodAttributes=\"<your value>\"");
HTTP Config Settings
When True, the class adds an Accept-Encoding header to the outgoing request. The value for this header can be controlled by the AcceptEncoding configuration setting. The default value for this header is "gzip, deflate".
The default value is True.
If set to True (default), the class will automatically use HTTP/1.1 if the server does not support HTTP/2. If set to False, the class if the server does not support HTTP/2.
The default value is True.
This property is provided so that the HTTP class can be extended with other security schemes in addition to the authorization schemes already implemented by the class.
The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".
The default value is False.
If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same; otherwise, the class .
Note: Following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.
Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.
A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).
The default value is 0 (Never). In this case, redirects are never followed, and the class instead.
Following are the valid options:
- 0 - Never
- 1 - Always
- 2 - Same Scheme
- "1.0"
- "1.1" (default)
- "2.0"
- "3.0"
When using HTTP/2 ("2.0"), additional restrictions apply. Please see the following notes for details.
HTTP/2 Notes
When using HTTP/2, a secure Secure Sockets Layer/Transport Layer Security (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/2 will result in an error.
If the server does not support HTTP/2, the class will automatically use HTTP/1.1 instead. This is done to provide compatibility without the need for any additional settings. To see which version was used, check NegotiatedHTTPVersion after calling a method. The AllowHTTPFallback setting controls whether this behavior is allowed (default) or disallowed.
HTTP/3 Notes
HTTP/3 is supported only in .NET and Java.
When using HTTP/3, a secure (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/3 will result in an error.
The format of the date value for IfModifiedSince is detailed in the HTTP specs. For example:
Sat, 29 Oct 2017 19:43:31 GMT.
The default value for KeepAlive is false.
0 (None) | No events are logged. |
1 (Info - default) | Informational events are logged. |
2 (Verbose) | Detailed data are logged. |
3 (Debug) | Debug data are logged. |
The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.
The value 2 (Verbose) logs additional information about the request and response.
The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).
The headers must follow the format "header: value" as described in the HTTP specifications. Header lines should be separated by .
Use this configuration setting with caution. If this configuration setting contains invalid headers, HTTP requests may fail.
This configuration setting is useful for extending the functionality of the class beyond what is provided.
.NET
Http http = new Http();
http.Config("TransferredRequest=on");
http.PostData = "body";
http.Post("http://someserver.com");
Console.WriteLine(http.Config("TransferredRequest"));
C++
HTTP http;
http.Config("TransferredRequest=on");
http.SetPostData("body", 5);
http.Post("http://someserver.com");
printf("%s\r\n", http.Config("TransferredRequest"));
Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding.
The default value is False and the hostname will always be used exactly as specified. Note: The CodePage setting must be set to a value capable of interpreting the specified host name. For instance, to specify UTF-8, set CodePage to 65001.
When True (default), the class will check for the existence of a Proxy auto-config URL, and if found, will determine the appropriate proxy to use.
Override the default with the name and version of your software.
TCPClient Config Settings
If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties.
0 | No firewall (default setting). |
1 | Connect through a tunneling proxy. FirewallPort is set to 80. |
2 | Connect through a SOCKS4 Proxy. FirewallPort is set to 1080. |
3 | Connect through a SOCKS5 Proxy. FirewallPort is set to 1080. |
10 | Connect through a SOCKS4A Proxy. FirewallPort is set to 1080. |
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This value is not applicable in macOS.
In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.
In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.
The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).
Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.
In multihomed hosts (machines with more than one IP interface), setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.
If the class is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).
Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.
LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.
This configuration setting is useful when trying to connect to services that require a trusted port on the client side. An example is the remote shell (rsh) service in UNIX systems.
If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.
If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.
The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.
www.google.com;www.nsoftware.com
Note: This value is not applicable in Java.
By default, this configuration setting is set to False.
0 | IPv4 only |
1 | IPv6 only |
2 | IPv6 with IPv4 fallback |
SSL Config Settings
When enabled, SSL packet logs are output using the SSLStatus event, which will fire each time an SSL packet is sent or received.
Enabling this configuration setting has no effect if SSLProvider is set to Platform.
The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g., 9d66eef0.0, 9d66eef0.1). OpenSSL recommends the use of the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.
The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by the following sequences:
-----BEGIN CERTIFICATE-----
... (CA certificate in base64 encoding) ...
-----END CERTIFICATE-----
Before, between, and after the certificate text is allowed, which can be used, for example, for descriptions of the certificates. Refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.
The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".
By default, OpenSSL uses the device file "/dev/urandom" to seed the PRNG, and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.
If set to True, the class will reuse the context if and only if the following criteria are met:
- The target host name is the same.
- The system cache entry has not expired (default timeout is 10 hours).
- The application process that calls the function is the same.
- The logon session is the same.
- The instance of the class is the same.
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermedaite Cert ... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert ... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE-----
Note: This configuration setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the SSLStatus event.
Use this configuration setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.
When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList configuration setting.
The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermediate Cert ... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert ... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE-----
By default, the enabled cipher suites will include all available ciphers ("*").
The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.
Multiple cipher suites are separated by semicolons.
Example values when SSLProvider is set to Platform include the following:
obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=CALG_AES_256");
obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES");
Possible values when SSLProvider is set to Platform include the following:
- CALG_3DES
- CALG_3DES_112
- CALG_AES
- CALG_AES_128
- CALG_AES_192
- CALG_AES_256
- CALG_AGREEDKEY_ANY
- CALG_CYLINK_MEK
- CALG_DES
- CALG_DESX
- CALG_DH_EPHEM
- CALG_DH_SF
- CALG_DSS_SIGN
- CALG_ECDH
- CALG_ECDH_EPHEM
- CALG_ECDSA
- CALG_ECMQV
- CALG_HASH_REPLACE_OWF
- CALG_HUGHES_MD5
- CALG_HMAC
- CALG_KEA_KEYX
- CALG_MAC
- CALG_MD2
- CALG_MD4
- CALG_MD5
- CALG_NO_SIGN
- CALG_OID_INFO_CNG_ONLY
- CALG_OID_INFO_PARAMETERS
- CALG_PCT1_MASTER
- CALG_RC2
- CALG_RC4
- CALG_RC5
- CALG_RSA_KEYX
- CALG_RSA_SIGN
- CALG_SCHANNEL_ENC_KEY
- CALG_SCHANNEL_MAC_KEY
- CALG_SCHANNEL_MASTER_HASH
- CALG_SEAL
- CALG_SHA
- CALG_SHA1
- CALG_SHA_256
- CALG_SHA_384
- CALG_SHA_512
- CALG_SKIPJACK
- CALG_SSL2_MASTER
- CALG_SSL3_MASTER
- CALG_SSL3_SHAMD5
- CALG_TEK
- CALG_TLS1_MASTER
- CALG_TLS1PRF
obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_ECDH_RSA_WITH_AES_128_CBC_SHA");
Possible values when SSLProvider is set to Internal include the following:
- TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
- TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
- TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
- TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
- TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
- TLS_RSA_WITH_AES_256_GCM_SHA384
- TLS_RSA_WITH_AES_128_GCM_SHA256
- TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
- TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
- TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
- TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
- TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
- TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
- TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
- TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
- TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
- TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
- TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
- TLS_RSA_WITH_AES_256_CBC_SHA256
- TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
- TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
- TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
- TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
- TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
- TLS_RSA_WITH_AES_128_CBC_SHA256
- TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
- TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
- TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
- TLS_RSA_WITH_AES_256_CBC_SHA
- TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
- TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
- TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
- TLS_DHE_RSA_WITH_AES_256_CBC_SHA
- TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
- TLS_DHE_DSS_WITH_AES_256_CBC_SHA
- TLS_RSA_WITH_AES_128_CBC_SHA
- TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
- TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
- TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
- TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
- TLS_DHE_RSA_WITH_AES_128_CBC_SHA
- TLS_DHE_DSS_WITH_AES_128_CBC_SHA
- TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
- TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
- TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
- TLS_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_RSA_WITH_DES_CBC_SHA
- TLS_DHE_RSA_WITH_DES_CBC_SHA
- TLS_DHE_DSS_WITH_DES_CBC_SHA
- TLS_RSA_WITH_RC4_128_MD5
- TLS_RSA_WITH_RC4_128_SHA
When TLS 1.3 is negotiated (see SSLEnabledProtocols), only the following cipher suites are supported:
- TLS_AES_256_GCM_SHA384
- TLS_CHACHA20_POLY1305_SHA256
- TLS_AES_128_GCM_SHA256
SSLEnabledCipherSuites is used together with SSLCipherStrength.
Not all supported protocols are enabled by default. The default value is 4032 for client components, and 3072 for server components. To specify a combination of enabled protocol versions set this config to the binary OR of one or more of the following values:
TLS1.3 | 12288 (Hex 3000) |
TLS1.2 | 3072 (Hex C00) (Default - Client and Server) |
TLS1.1 | 768 (Hex 300) (Default - Client) |
TLS1 | 192 (Hex C0) (Default - Client) |
SSL3 | 48 (Hex 30) |
SSL2 | 12 (Hex 0C) |
Note that only TLS 1.2 is enabled for server components that accept incoming connections. This adheres to industry standards to ensure a secure connection. Client components enable TLS 1.0, TLS 1.1, and TLS 1.2 by default and will negotiate the highest mutually supported version when connecting to a server, which should be TLS 1.2 in most cases.
SSLEnabledProtocols: Transport Layer Security (TLS) 1.3 Notes:
In the JavaScript edition, the platform implementation is used when TLS 1.3 is enabled and SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
SSLEnabledProtocols: SSL2 and SSL3 Notes:
SSL 2.0 and 3.0 are not supported by the class when the SSLProvider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and SSLProvider needs to be set to platform.
This configuration setting is applicable only when SSLProvider is set to Internal.
If set to True, all certificates returned by the server will be present in the Encoded parameter of the SSLServerAuthentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.
When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools, such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffic for debugging purposes. When writing to this file, the class will only append, it will not overwrite previous values.
Note: This configuration setting is applicable only when SSLProvider is set to Internal.
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedCipher[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedCipherStrength[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedCipherSuite[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedKeyExchange[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedKeyExchangeStrength[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedVersion[connId]");
0x00000001 | Ignore time validity status of certificate. |
0x00000002 | Ignore time validity status of CTL. |
0x00000004 | Ignore non-nested certificate times. |
0x00000010 | Allow unknown certificate authority. |
0x00000020 | Ignore wrong certificate usage. |
0x00000100 | Ignore unknown certificate revocation status. |
0x00000200 | Ignore unknown CTL signer revocation status. |
0x00000400 | Ignore unknown certificate authority revocation status. |
0x00000800 | Ignore unknown root revocation status. |
0x00008000 | Allow test root certificate. |
0x00004000 | Trust test root certificate. |
0x80000000 | Ignore non-matching CN (certificate CN non-matching server name). |
This functionality is currently not available when the provider is OpenSSL.
The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermediate Cert... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE-----
When specified the class will verify that the server certificate signature algorithm is among the values specified in this configuration setting. If the server certificate signature algorithm is unsupported, the class .
The format of this value is a comma-separated list of hash-signature combinations. For instance:
component.SSLProvider = TCPClientSSLProviders.sslpInternal;
component.Config("SSLEnabledProtocols=3072"); //TLS 1.2
component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa");
The default value for this configuration setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.
To not restrict the server's certificate signature algorithm, specify an empty string as the value for this configuration setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.
The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.
When using TLS 1.2 and SSLProvider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:
- "ecdhe_secp256r1" (default)
- "ecdhe_secp384r1" (default)
- "ecdhe_secp521r1" (default)
The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result, only some groups are included by default in this configuration setting.
Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used that is not present in this list, it will incur an additional roundtrip and time to generate the key share for that group.
In most cases, this configuration setting does not need to be modified. This should be modified only if there is a specific reason to do so.
The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072
The values are ordered from most preferred to least preferred. The following values are supported:
- "ecdhe_x25519" (default)
- "ecdhe_x448"
- "ecdhe_secp256r1" (default)
- "ecdhe_secp384r1" (default)
- "ecdhe_secp521r1"
- "ffdhe_2048" (default)
- "ffdhe_3072" (default)
- "ffdhe_4096"
- "ffdhe_6144"
- "ffdhe_8192"
- "ed25519" (default)
- "ed448" (default)
- "ecdsa_secp256r1_sha256" (default)
- "ecdsa_secp384r1_sha384" (default)
- "ecdsa_secp521r1_sha512" (default)
- "rsa_pkcs1_sha256" (default)
- "rsa_pkcs1_sha384" (default)
- "rsa_pkcs1_sha512" (default)
- "rsa_pss_sha256" (default)
- "rsa_pss_sha384" (default)
- "rsa_pss_sha512" (default)
The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192
The values are ordered from most preferred to least preferred. The following values are supported:
- "ecdhe_x25519" (default)
- "ecdhe_x448" (default)
- "ecdhe_secp256r1" (default)
- "ecdhe_secp384r1" (default)
- "ecdhe_secp521r1" (default)
- "ffdhe_2048" (default)
- "ffdhe_3072" (default)
- "ffdhe_4096" (default)
- "ffdhe_6144" (default)
- "ffdhe_8192" (default)
Socket Config Settings
Note: This option is not valid for User Datagram Protocol (UDP) ports.
Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.
Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.
XML Config Settings
This option should be combined with Indent for full effect.
If you would like any other characters to be considered as name characters, you may set them as a string into this property.
If you would like any other characters to be considered as white space, you may set them as a string into this property.
If False (default) and Validate is set to False, the prefix is included in the Element parameter (e.g., ds:DigestMethod).
If True and Validate is set to False, the prefix is not included in the Element parameter (e.g., DigestMethod).
This setting is applicable only when Validate is False.
<?xml version="1.0" encoding="utf-8" standalone="yes" ?> ...
This option should be combined with EOL for full effect.
Offset values start at 1.
Note: This applies only when BuildDOM is False.
By default, no additional processing is performed and the string is returned as is from the document. Strings may also be XML unescaped. Possible values are as follows:
0 (none - default) | No additional processing is performed. |
1 | Strings are XML unescaped. |
For instance, when set to 0, the following text may be fired through the Characters event:
&"<>
When set to 1, the following text would be fired through the Characters event:
&"<>
Base Config Settings
The following is a list of valid code page identifiers:
Identifier | Name |
037 | IBM EBCDIC - U.S./Canada |
437 | OEM - United States |
500 | IBM EBCDIC - International |
708 | Arabic - ASMO 708 |
709 | Arabic - ASMO 449+, BCON V4 |
710 | Arabic - Transparent Arabic |
720 | Arabic - Transparent ASMO |
737 | OEM - Greek (formerly 437G) |
775 | OEM - Baltic |
850 | OEM - Multilingual Latin I |
852 | OEM - Latin II |
855 | OEM - Cyrillic (primarily Russian) |
857 | OEM - Turkish |
858 | OEM - Multilingual Latin I + Euro symbol |
860 | OEM - Portuguese |
861 | OEM - Icelandic |
862 | OEM - Hebrew |
863 | OEM - Canadian-French |
864 | OEM - Arabic |
865 | OEM - Nordic |
866 | OEM - Russian |
869 | OEM - Modern Greek |
870 | IBM EBCDIC - Multilingual/ROECE (Latin-2) |
874 | ANSI/OEM - Thai (same as 28605, ISO 8859-15) |
875 | IBM EBCDIC - Modern Greek |
932 | ANSI/OEM - Japanese, Shift-JIS |
936 | ANSI/OEM - Simplified Chinese (PRC, Singapore) |
949 | ANSI/OEM - Korean (Unified Hangul Code) |
950 | ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) |
1026 | IBM EBCDIC - Turkish (Latin-5) |
1047 | IBM EBCDIC - Latin 1/Open System |
1140 | IBM EBCDIC - U.S./Canada (037 + Euro symbol) |
1141 | IBM EBCDIC - Germany (20273 + Euro symbol) |
1142 | IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) |
1143 | IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) |
1144 | IBM EBCDIC - Italy (20280 + Euro symbol) |
1145 | IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) |
1146 | IBM EBCDIC - United Kingdom (20285 + Euro symbol) |
1147 | IBM EBCDIC - France (20297 + Euro symbol) |
1148 | IBM EBCDIC - International (500 + Euro symbol) |
1149 | IBM EBCDIC - Icelandic (20871 + Euro symbol) |
1200 | Unicode UCS-2 Little-Endian (BMP of ISO 10646) |
1201 | Unicode UCS-2 Big-Endian |
1250 | ANSI - Central European |
1251 | ANSI - Cyrillic |
1252 | ANSI - Latin I |
1253 | ANSI - Greek |
1254 | ANSI - Turkish |
1255 | ANSI - Hebrew |
1256 | ANSI - Arabic |
1257 | ANSI - Baltic |
1258 | ANSI/OEM - Vietnamese |
1361 | Korean (Johab) |
10000 | MAC - Roman |
10001 | MAC - Japanese |
10002 | MAC - Traditional Chinese (Big5) |
10003 | MAC - Korean |
10004 | MAC - Arabic |
10005 | MAC - Hebrew |
10006 | MAC - Greek I |
10007 | MAC - Cyrillic |
10008 | MAC - Simplified Chinese (GB 2312) |
10010 | MAC - Romania |
10017 | MAC - Ukraine |
10021 | MAC - Thai |
10029 | MAC - Latin II |
10079 | MAC - Icelandic |
10081 | MAC - Turkish |
10082 | MAC - Croatia |
12000 | Unicode UCS-4 Little-Endian |
12001 | Unicode UCS-4 Big-Endian |
20000 | CNS - Taiwan |
20001 | TCA - Taiwan |
20002 | Eten - Taiwan |
20003 | IBM5550 - Taiwan |
20004 | TeleText - Taiwan |
20005 | Wang - Taiwan |
20105 | IA5 IRV International Alphabet No. 5 (7-bit) |
20106 | IA5 German (7-bit) |
20107 | IA5 Swedish (7-bit) |
20108 | IA5 Norwegian (7-bit) |
20127 | US-ASCII (7-bit) |
20261 | T.61 |
20269 | ISO 6937 Non-Spacing Accent |
20273 | IBM EBCDIC - Germany |
20277 | IBM EBCDIC - Denmark/Norway |
20278 | IBM EBCDIC - Finland/Sweden |
20280 | IBM EBCDIC - Italy |
20284 | IBM EBCDIC - Latin America/Spain |
20285 | IBM EBCDIC - United Kingdom |
20290 | IBM EBCDIC - Japanese Katakana Extended |
20297 | IBM EBCDIC - France |
20420 | IBM EBCDIC - Arabic |
20423 | IBM EBCDIC - Greek |
20424 | IBM EBCDIC - Hebrew |
20833 | IBM EBCDIC - Korean Extended |
20838 | IBM EBCDIC - Thai |
20866 | Russian - KOI8-R |
20871 | IBM EBCDIC - Icelandic |
20880 | IBM EBCDIC - Cyrillic (Russian) |
20905 | IBM EBCDIC - Turkish |
20924 | IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) |
20932 | JIS X 0208-1990 & 0121-1990 |
20936 | Simplified Chinese (GB2312) |
21025 | IBM EBCDIC - Cyrillic (Serbian, Bulgarian) |
21027 | Extended Alpha Lowercase |
21866 | Ukrainian (KOI8-U) |
28591 | ISO 8859-1 Latin I |
28592 | ISO 8859-2 Central Europe |
28593 | ISO 8859-3 Latin 3 |
28594 | ISO 8859-4 Baltic |
28595 | ISO 8859-5 Cyrillic |
28596 | ISO 8859-6 Arabic |
28597 | ISO 8859-7 Greek |
28598 | ISO 8859-8 Hebrew |
28599 | ISO 8859-9 Latin 5 |
28605 | ISO 8859-15 Latin 9 |
29001 | Europa 3 |
38598 | ISO 8859-8 Hebrew |
50220 | ISO 2022 Japanese with no halfwidth Katakana |
50221 | ISO 2022 Japanese with halfwidth Katakana |
50222 | ISO 2022 Japanese JIS X 0201-1989 |
50225 | ISO 2022 Korean |
50227 | ISO 2022 Simplified Chinese |
50229 | ISO 2022 Traditional Chinese |
50930 | Japanese (Katakana) Extended |
50931 | US/Canada and Japanese |
50933 | Korean Extended and Korean |
50935 | Simplified Chinese Extended and Simplified Chinese |
50936 | Simplified Chinese |
50937 | US/Canada and Traditional Chinese |
50939 | Japanese (Latin) Extended and Japanese |
51932 | EUC - Japanese |
51936 | EUC - Simplified Chinese |
51949 | EUC - Korean |
51950 | EUC - Traditional Chinese |
52936 | HZ-GB2312 Simplified Chinese |
54936 | Windows XP: GB18030 Simplified Chinese (4 Byte) |
57002 | ISCII Devanagari |
57003 | ISCII Bengali |
57004 | ISCII Tamil |
57005 | ISCII Telugu |
57006 | ISCII Assamese |
57007 | ISCII Oriya |
57008 | ISCII Kannada |
57009 | ISCII Malayalam |
57010 | ISCII Gujarati |
57011 | ISCII Punjabi |
65000 | Unicode UTF-7 |
65001 | Unicode UTF-8 |
Identifier | Name |
1 | ASCII |
2 | NEXTSTEP |
3 | JapaneseEUC |
4 | UTF8 |
5 | ISOLatin1 |
6 | Symbol |
7 | NonLossyASCII |
8 | ShiftJIS |
9 | ISOLatin2 |
10 | Unicode |
11 | WindowsCP1251 |
12 | WindowsCP1252 |
13 | WindowsCP1253 |
14 | WindowsCP1254 |
15 | WindowsCP1250 |
21 | ISO2022JP |
30 | MacOSRoman |
10 | UTF16String |
0x90000100 | UTF16BigEndian |
0x94000100 | UTF16LittleEndian |
0x8c000100 | UTF32String |
0x98000100 | UTF32BigEndian |
0x9c000100 | UTF32LittleEndian |
65536 | Proprietary |
- Product: The product the license is for.
- Product Key: The key the license was generated from.
- License Source: Where the license was found (e.g., RuntimeLicense, License File).
- License Type: The type of license installed (e.g., Royalty Free, Single Server).
- Last Valid Build: The last valid build number for which the license will work.
This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.
Setting this configuration setting to true tells the class to use the internal implementation instead of using the system security libraries.
This setting is set to false by default on all platforms.
Trappable Errors (class ipworks.soap)
SOAP Errors
169 | Invalid param index (out of range). |
170 | Invalid namespace index (out of range). |
171 | Method not found. Please specify a valid Method. |
172 | No method URI. Please specify a valid MethodURI. |
173 | SOAP Fault. See FaultCode and/or FaultString for details. |
HTTP Errors
118 | Firewall Error. Error description contains detailed message. |
143 | Busy executing current method. |
151 | HTTP protocol error. The error message has the server response. |
152 | No server specified in URL |
153 | Specified URLScheme is invalid. |
155 | Range operation is not supported by server. |
156 | Invalid cookie index (out of range). |
301 | Interrupted. |
302 | Can't open AttachedFile. |
TCPClient Errors
100 | You cannot change the RemotePort at this time. A connection is in progress. |
101 | You cannot change the RemoteHost (Server) at this time. A connection is in progress. |
102 | The RemoteHost address is invalid (0.0.0.0). |
104 | Already connected. If you want to reconnect, close the current connection first. |
106 | You cannot change the LocalPort at this time. A connection is in progress. |
107 | You cannot change the LocalHost at this time. A connection is in progress. |
112 | You cannot change MaxLineLength at this time. A connection is in progress. |
116 | RemotePort cannot be zero. Please specify a valid service port number. |
117 | You cannot change the UseConnection option while the class is active. |
135 | Operation would block. |
201 | Timeout. |
211 | Action impossible in control's present state. |
212 | Action impossible while not connected. |
213 | Action impossible while listening. |
301 | Timeout. |
302 | Could not open file. |
434 | Unable to convert string to selected CodePage. |
1105 | Already connecting. If you want to reconnect, close the current connection first. |
1117 | You need to connect first. |
1119 | You cannot change the LocalHost at this time. A connection is in progress. |
1120 | Connection dropped by remote host. |
SSL Errors
270 | Cannot load specified security library. |
271 | Cannot open certificate store. |
272 | Cannot find specified certificate. |
273 | Cannot acquire security credentials. |
274 | Cannot find certificate chain. |
275 | Cannot verify certificate chain. |
276 | Error during handshake. |
280 | Error verifying certificate. |
281 | Could not find client certificate. |
282 | Could not find server certificate. |
283 | Error encrypting data. |
284 | Error decrypting data. |
TCP/IP Errors
10004 | [10004] Interrupted system call. |
10009 | [10009] Bad file number. |
10013 | [10013] Access denied. |
10014 | [10014] Bad address. |
10022 | [10022] Invalid argument. |
10024 | [10024] Too many open files. |
10035 | [10035] Operation would block. |
10036 | [10036] Operation now in progress. |
10037 | [10037] Operation already in progress. |
10038 | [10038] Socket operation on nonsocket. |
10039 | [10039] Destination address required. |
10040 | [10040] Message is too long. |
10041 | [10041] Protocol wrong type for socket. |
10042 | [10042] Bad protocol option. |
10043 | [10043] Protocol is not supported. |
10044 | [10044] Socket type is not supported. |
10045 | [10045] Operation is not supported on socket. |
10046 | [10046] Protocol family is not supported. |
10047 | [10047] Address family is not supported by protocol family. |
10048 | [10048] Address already in use. |
10049 | [10049] Cannot assign requested address. |
10050 | [10050] Network is down. |
10051 | [10051] Network is unreachable. |
10052 | [10052] Net dropped connection or reset. |
10053 | [10053] Software caused connection abort. |
10054 | [10054] Connection reset by peer. |
10055 | [10055] No buffer space available. |
10056 | [10056] Socket is already connected. |
10057 | [10057] Socket is not connected. |
10058 | [10058] Cannot send after socket shutdown. |
10059 | [10059] Too many references, cannot splice. |
10060 | [10060] Connection timed out. |
10061 | [10061] Connection refused. |
10062 | [10062] Too many levels of symbolic links. |
10063 | [10063] File name is too long. |
10064 | [10064] Host is down. |
10065 | [10065] No route to host. |
10066 | [10066] Directory is not empty |
10067 | [10067] Too many processes. |
10068 | [10068] Too many users. |
10069 | [10069] Disc Quota Exceeded. |
10070 | [10070] Stale NFS file handle. |
10071 | [10071] Too many levels of remote in path. |
10091 | [10091] Network subsystem is unavailable. |
10092 | [10092] WINSOCK DLL Version out of range. |
10093 | [10093] Winsock is not loaded yet. |
11001 | [11001] Host not found. |
11002 | [11002] Nonauthoritative 'Host not found' (try again or check DNS setup). |
11003 | [11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP. |
11004 | [11004] Valid name, no data record (check DNS setup). |
XML Errors
101 | Invalid attribute index. |
102 | No attributes available. |
103 | Invalid namespace index. |
104 | No namespaces available. |
105 | Invalid element index. |
106 | No elements available. |
107 | Attribute does not exist. |
201 | Unbalanced element tag. |
202 | Unknown element prefix (cannot find namespace). |
203 | Unknown attribute prefix (cannot find namespace). |
204 | Invalid XML markup. |
205 | Invalid end state for parser. |
206 | Document contains unbalanced elements. |
207 | Invalid XPath. |
208 | No such child. |
209 | Top element does not match start of path. |
210 | DOM tree unavailable (set BuildDOM to True and reparse). |
302 | Cannot open file. |
401 | Invalid XML would be generated. |
402 | An invalid XML name has been specified. |