IMAP Class

Properties   Methods   Events   Config Settings   Errors  

The IMAP Class is used to communicate with IMAP servers using the Internet Message Access Protocol (IMAP).

Syntax

ipworksssl.IMAP

Remarks

The IMAP Class supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections (RFC 2595). When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL-related settings are also supported through the Config method.

The IMAP Class implements a standard IMAP client as specified in RFC 1730 and RFC 2060.

The first step in using the class is specifying a MailServer, a User to connect as, and a Password to authenticate with. After that, one or more requests may be sent to the server via the class's methods. Results are retrieved through events and a number of key properties.

Normally, after connecting to the server, a Mailbox is selected (or examined) using the ExamineMailbox method. After the Mailbox is selected, MessageCount and RecentMessageCount show the number of messages in the mailbox, and MailboxFlags show the flags pertaining to the mailbox.

A number of operations may be performed by the server in response to commands sent using the class's methods. The primary arguments for most commands are the Mailbox property and the MessageSet property. The MessageSet property denotes either a single message, or a range of messages. Other arguments are specified through other properties, such as SortCriteria and MessageFlags.

Responses are received through events, such as MessageInfo and MailboxList, and also are reflected to properties, such as MessageText and MessageSubject.

The MessagePart event describes the MIME structure of the retrieved messages. One MessagePart event is fired for every message part, giving information about the particular part. Later on, message parts may be retrieved separately through the RetrieveMessagePart method. This speeds up processing by avoiding the need to retrieve full messages from the server.

The PITrail event traces the interaction between the client and the server. It includes all exchanges except for transfers of messages, message parts, and message headers.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

AuthMechanism Property (IMAP Class)

This property includes the authentication mechanism to be used when connecting to the mail server.

Syntax

public int getAuthMechanism();
public void setAuthMechanism(int authMechanism);

Enumerated values:
  public final static int amUserPassword = 0;
  public final static int amCRAMMD5 = 1;
  public final static int amNTLM = 2;
  public final static int amAPOP = 3;
  public final static int amSASLPlain = 4;
  public final static int amSASLDigestMD5 = 5;
  public final static int amKerberos = 6;
  public final static int amXOAUTH2 = 7;

Default Value

0

Remarks

AutoDecodeParts Property (IMAP Class)

This property determines whether or not to automatically decode message parts.

Syntax

public boolean isAutoDecodeParts();
public void setAutoDecodeParts(boolean autoDecodeParts);

Default Value

False

Remarks

This property determines whether or not to automatically decode message parts. Message parts, especially binary message parts, are normally sent by the server encoded (Base64 or other format). If this setting is True, the parts are automatically decoded while being received.

Connected Property (IMAP Class)

Whether the class is connected.

Syntax

public boolean isConnected();

Default Value

False

Remarks

This property is used to determine whether or not the class is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.

This property is read-only and not available at design time.

EndByte Property (IMAP Class)

This property includes the byte index of the position where the transfer should end.

Syntax

public long getEndByte();
public void setEndByte(long endByte);

Default Value

0

Remarks

StartByte and EndByte are used together with the RetrieveMessagePart method to specify the portion of the message to be retrieved from the server.

When StartByte or EndByte contain values other than the default (0), only the corresponding portion of the message is retrieved from the server.

Byte indexes start from 1. The default value for EndByte is 0, which corresponds to the end of the message.

This property is not available at design time.

Firewall Property (IMAP Class)

A set of properties related to firewall access.

Syntax

public Firewall getFirewall();
public void setFirewall(Firewall firewall);

Remarks

This is a Firewall-type property, which contains fields describing the firewall through which the class will attempt to connect.

Idle Property (IMAP Class)

The current status of the class.

Syntax

public boolean isIdle();

Default Value

True

Remarks

This property will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.

This property is read-only.

LastReply Property (IMAP Class)

This property indicates the last reply received from the server.

Syntax

public String getLastReply();

Default Value

""

Remarks

This property indicates the last reply received from the server. It can be used for informational purposes. The same information and more also can be retrieved through the PITrail event.

This property is read-only.

LocalFile Property (IMAP Class)

This property includes the path to a local file for downloading the message body.

Syntax

public String getLocalFile();
public void setLocalFile(String localFile);

Default Value

""

Remarks

This property is used when retrieving a message. If the file exists, and the Overwrite property is set to true, then the component will overwrite the file.

If this property is empty and the SetMessageStream method has not been used to set a stream, then the received data is provided through the MessageText property and the parameters for the Transfer event. The SetMessageStream method and the LocalFile property will reset each other when set.

LocalHost Property (IMAP Class)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

public String getLocalHost();
public void setLocalHost(String localHost);

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the class is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Mailbox Property (IMAP Class)

This property includes the name of the mailbox selected on the server.

Syntax

public String getMailbox();
public void setMailbox(String mailbox);

Default Value

"Inbox"

Remarks

This method contains the name of the mailbox selected on the server and also is used as argument to most methods. Please refer to the class methods for more information.

Example 1. Open a Mailbox in Read/Write Mode:

IMAPControl.Mailbox = "INBOX" IMAPControl.SelectMailbox

Example 2. Open a Mailbox in Read-Only Mode:

IMAPControl.Mailbox = "INBOX.Folder" IMAPControl.ExamineMailbox

MailboxFlags Property (IMAP Class)

This property defines flags in the selected mailbox.

Syntax

public String getMailboxFlags();

Default Value

""

Remarks

This property defines flags in the selected mailbox. The class fills out MessageCount, RecentMessageCount, and MailboxFlags after connecting to the MailServer and selecting or examining a Mailbox.

This property is read-only and not available at design time.

MailboxList Property (IMAP Class)

The property includes the collection of mailboxes listed by the server.

Syntax

public MailboxList getMailboxList();

Remarks

This collection contains a list of mailboxes returned by the server when ListMailboxes or ListSubscribedMailboxes is called.

MailboxLimit can be used to control the number of mailboxes saved.

This collection is indexed from 0 to size -1.

This property is read-only and not available at design time.

MailPort Property (IMAP Class)

This property includes the port of the IMAP server (default is 143).

Syntax

public int getMailPort();
public void setMailPort(int mailPort);

Default Value

143

Remarks

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

For the implicit Secure Sockets Layer (SSL), use port 993 (please refer to the SSLStartMode property for more information).

This property is not available at design time.

MailServer Property (IMAP Class)

This property includes the name or address of the mail server (IMAP server).

Syntax

public String getMailServer();
public void setMailServer(String mailServer);

Default Value

""

Remarks

This property specifies the IP address (IP number in dotted internet format) or domain name of the mail server. It must be set before a connection is attempted and cannot be changed once a connection is in progress.

If this property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the MailServer property is set to the corresponding address. If the search is not successful, an error is returned.

If the class is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

Message Property (IMAP Class)

This property provides the raw message content.

Syntax

public byte[] getMessage();
public void setMessage(byte[] message);

Default Value

""

Remarks

This property is populated after calling RetrieveMessagePart and holds the raw message content. This can be used to access the data before any processing is done by the class.

This property is not available at design time.

MessageContentEncoding Property (IMAP Class)

This property includes the ContentEncoding of the selected message.

Syntax

public String getMessageContentEncoding();

Default Value

""

Remarks

The property is automatically set by the class when message information is retrieved through the RetrieveMessageInfo method.

This property is read-only and not available at design time.

MessageContentType Property (IMAP Class)

This property includes the ContentType of the message.

Syntax

public String getMessageContentType();

Default Value

""

Remarks

This property denotes the type of content contained in the message, such as plain, multipart, or multipart/alternative. You also may need to check the MessageContentEncoding property or read the individual message parts.

This property is read-only and not available at design time.

MessageCount Property (IMAP Class)

This property includes the total number of messages on the Mailbox .

Syntax

public int getMessageCount();

Default Value

0

Remarks

This property contains the total number of messages on the Mailbox. The class fills out MessageCount, RecentMessageCount, and MailboxFlags after connecting to the MailServer and selecting or examining a Mailbox.

This property is read-only.

MessageDate Property (IMAP Class)

The property includes the time the message was created.

Syntax

public String getMessageDate();

Default Value

""

Remarks

This property contains the date and time when the message was created. This value is taken from the ENVELOPE structure of the message corresponding to the date.

RFC 822 contains detailed date format specifications. An example of a valid date is "Fri, 1 Mar 96 21:24:52 EST".

This property is read-only and not available at design time.

MessageDeliveryTime Property (IMAP Class)

This property includes the time the message was delivered to the mail server.

Syntax

public String getMessageDeliveryTime();

Default Value

""

Remarks

This property contains the time the message was delivered to the mail server. This value is taken from the INTERNALDATE property of the message. The time format is defined in RFC 821.

This property is read-only and not available at design time.

MessageFlags Property (IMAP Class)

This property contains the flags of the current message.

Syntax

public String getMessageFlags();
public void setMessageFlags(String messageFlags);

Default Value

""

Remarks

This property contains the flags of the current message. It also is used to specify flags when AppendToMailbox is called.

Examples of possible flag values are server dependent, but they can include the following:

IMAPControl.MessageSet = "1" IMAPControl.AddMessageFlags("\Deleted")

This property is not available at design time.

MessageFrom Property (IMAP Class)

This property includes the address of the author of the message.

Syntax

public String getMessageFrom();

Default Value

""

Remarks

This property normally has the same value as MessageSender.

In some cases, a message may have more than one From address. If this is the case, the addresses are provided in the MessageFrom property and are separated by commas.

This property is read-only and not available at design time.

MessageHeaders Property (IMAP Class)

This property includes the collection of RFC 822-encoded headers of the message.

Syntax

public HeaderList getMessageHeaders();
public void setMessageHeaders(HeaderList messageHeaders);

Remarks

This property contains the full headers of the message in RFC 822 format. The headers are retrieved by calling the RetrieveMessageHeaders or the RetrieveMessagePartHeaders method.

This property is not available at design time.

MessageHeadersString Property (IMAP Class)

This property includes the string version of the RFC 822-encoded headers in the message.

Syntax

public String getMessageHeadersString();
public void setMessageHeadersString(String messageHeadersString);

Default Value

""

Remarks

This property contains the full headers of the message in RFC 822 format. The headers are retrieved by calling the RetrieveMessageHeaders or the RetrieveMessagePartHeaders method.

This property is not available at design time.

MessageId Property (IMAP Class)

This property includes the message identifier of the current message.

Syntax

public String getMessageId();

Default Value

""

Remarks

The class fills out this property when message information is retrieved from the MailServer.

This Id is permanent if UIDMode is set, and otherwise is temporary.

This property is read-only and not available at design time.

MessageInfo Property (IMAP Class)

This property includes the collection of messages retrieved by RetrieveMessageInfo .

Syntax

public MessageInfoList getMessageInfo();

Remarks

This property is populated when messages are searched or listed or when message information is received from the server. The collection contains a list of each message's MessageInfo as returned by the server.

MessageInfoLimit can be used to control the number of MessageInfos saved.

This collection is indexed from 0 to size -1.

This property is read-only and not available at design time.

MessageInReplyTo Property (IMAP Class)

This property includes the unique message identifier of the message being replied to.

Syntax

public String getMessageInReplyTo();

Default Value

""

Remarks

The class fills out this property with the value of the In-Reply-To: message header.

This value can be useful when threading messages by referring to the message being replied to.

The unique message identifier of the message itself is given by the MessageNetId property.

This property is read-only and not available at design time.

MessageNetId Property (IMAP Class)

This property includes the globally unique identifier of the message.

Syntax

public String getMessageNetId();

Default Value

""

Remarks

This property contains the globally unique identifier of the message. The class fills the MessageNetId with the value of the Message-Id: header. This is a globally unique value normally created by the first mail server the message is sent to.

This property is read-only and not available at design time.

MessageParts Property (IMAP Class)

This property includes a collection of message parts collected by RetrieveMessageInfo .

Syntax

public MessagePartList getMessageParts();

Remarks

This property contains a collection of message parts that is populated when you call RetrieveMessageInfo. Once the message is received from the server, the class parses the different parts and their corresponding information into the MESSAGEPARTS collection. Each MessagePart contains a unique Id.

MessagePartLimit can be used to control the number of message parts saved.

This collection is indexed from 0 to size -1.

This property is read-only and not available at design time.

MessageRecipients Property (IMAP Class)

This property includes a collection of recipients for the current message.

Syntax

public MessageRecipientList getMessageRecipients();

Remarks

This property contains a collection of the people to whom the message was sent. Each MessageRecipient contains information describing that recipient, and what type of recipient it is. This collection is populated when the RetrieveMessageInfo method is called.

This collection is indexed from 0 to size -1.

This property is read-only and not available at design time.

MessageReplyTo Property (IMAP Class)

This property includes the email addresses to which replies to the message should be sent.

Syntax

public String getMessageReplyTo();

Default Value

""

Remarks

This property contains the email addresses to which replies to the message should be sent. In some cases, a message may have more than one Reply-To address. If this is the case, the addresses are provided in this property and are separated by commas.

This property is read-only and not available at design time.

MessageSender Property (IMAP Class)

This property includes the address of the sender of the message.

Syntax

public String getMessageSender();

Default Value

""

Remarks

This property contains the address of the sender of the message. This normally is the same value as MessageFrom.

In some cases, a message may have more than one sender. If this is the case, the addresses are provided in the MessageSender property and are separated by commas.

This property is read-only and not available at design time.

MessageSet Property (IMAP Class)

This property includes the set of messages to operate on.

Syntax

public String getMessageSet();
public void setMessageSet(String messageSet);

Default Value

""

Remarks

This property indicates the set of messages to operate on. This is used as an argument to most method calls.

It may consist of a single message number, a range of messages specified by two message numbers separated by ':' (e.g. "1:5"), and/or individual message numbers separated by ',' (e.g. "1:5,7,10").

Example 1. Setting MessageSet:

IMAPControl.MessageSet = "1" IMAPControl.RetrieveMessageInfo() IMAPControl.MessageSet = "1:5" IMAPControl.RetrieveMessageInfo() IMAPControl.MessageSet = "1,5,7" IMAPControl.RetrieveMessageInfo()

MessageSize Property (IMAP Class)

This property includes the size of the selected message.

Syntax

public long getMessageSize();

Default Value

0

Remarks

The class fills out this property with the size of the selected message when message information is retrieved from the MailServer.

This property is read-only and not available at design time.

MessageSubject Property (IMAP Class)

This property includes the subject of the message.

Syntax

public String getMessageSubject();

Default Value

""

Remarks

The class fills out this property with the subject of the message when message information is retrieved from the MailServer.

This property is read-only and not available at design time.

MessageText Property (IMAP Class)

This property includes the body of the retrieved message.

Syntax

public String getMessageText();
public void setMessageText(String messageText);

Default Value

""

Remarks

The class fills out this property with the contents of the message body (in RFC 822 format) when a call to RetrieveMessageText completes successfully and the LocalFile property is not set or the SetMessageStream method has not been used to set a stream.

This property is not available at design time.

Overwrite Property (IMAP Class)

This property indicates whether or not the class should overwrite files during transfer.

Syntax

public boolean isOverwrite();
public void setOverwrite(boolean overwrite);

Default Value

False

Remarks

This property is a value indicating whether or not the class should overwrite files when downloading the message text or a message part and LocalFile is set. If Overwrite is False, an error will be thrown whenever LocalFile exists.

Password Property (IMAP Class)

This property includes the password to be used to authenticate to the MailServer .

Syntax

public String getPassword();
public void setPassword(String password);

Default Value

""

Remarks

This property contains the password used to authenticate to the MailServer. Both the User and Password properties must be set before connecting to the MailServer.

PeekMode Property (IMAP Class)

When set to True, the message Seen flag is not changed during reading.

Syntax

public boolean isPeekMode();
public void setPeekMode(boolean peekMode);

Default Value

False

Remarks

This property contains a True or False to determine whether or not this message should be seen. When this property is set to True, a PEEK option is added to all IMAP FETCH commands sent to the server. In this case, an RFC-compliant IMAP server should not set the Seen flag on the message.

This property is not available at design time.

RecentMessageCount Property (IMAP Class)

This property includes the number of new messages in the Mailbox .

Syntax

public int getRecentMessageCount();

Default Value

0

Remarks

This property contains the number of new messages that are in the Mailbox. The class fills out MessageCount, RecentMessageCount, and MailboxFlags after connecting to the MailServer and selecting or examining a Mailbox.

This property is read-only.

SortCriteria Property (IMAP Class)

This property sorts criteria to use for message retrieval operations.

Syntax

public String getSortCriteria();
public void setSortCriteria(String sortCriteria);

Default Value

""

Remarks

This property sorts criteria to use for message retrieval operations. When set, the class will send the SORT command to the server before any retrieval. If the server supports the SORT command, the results from the retrieve operation will be sorted according to SortCriteria. The format of the SortCriteria property consists of a parenthesized list of one or more sort keys.

Example. Setting SortCriteria:

IMAPControl.SortCriteria = "DATE" IMAPControl.SortCriteria = "SUBJECT FROM" IMAPControl.SortCriteria = "REVERSE SUBJECT"

Possible sort keys include the following:

Note: IMAP SORT functionality is relatively new and not all servers may implement it.

SSLAcceptServerCert Property (IMAP Class)

Instructs the class to unconditionally accept the server certificate that matches the supplied certificate.

Syntax

public Certificate getSSLAcceptServerCert();
public void setSSLAcceptServerCert(Certificate SSLAcceptServerCert);

Remarks

If it finds any issues with the certificate presented by the server, the class will normally terminate the connection with an error.

You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

Note: This functionality is provided only for cases in which you otherwise know that you are communicating with the right server. If used improperly, this property may create a security breach. Use it at your own risk.

SSLCert Property (IMAP Class)

The certificate to be used during Secure Sockets Layer (SSL) negotiation.

Syntax

public Certificate getSSLCert();
public void setSSLCert(Certificate SSLCert);

Remarks

This property includes the digital certificate that the class will use during SSL negotiation. Set this property to a valid certificate before starting SSL negotiation. To set a certificate, you may set the Encoded field to the encoded certificate. To select a certificate, use the store and subject fields.

SSLProvider Property (IMAP Class)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

public int getSSLProvider();
public void setSSLProvider(int SSLProvider);

Enumerated values:
  public final static int sslpAutomatic = 0;
  public final static int sslpPlatform = 1;
  public final static int sslpInternal = 2;

Default Value

0

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

SSLServerCert Property (IMAP Class)

The server certificate for the last established connection.

Syntax

public Certificate getSSLServerCert();

Remarks

This property contains the server certificate for the last established connection.

SSLServerCert is reset every time a new connection is attempted.

This property is read-only.

SSLStartMode Property (IMAP Class)

This property determines how the class starts the Secure Sockets Layer (SSL) negotiation.

Syntax

public int getSSLStartMode();
public void setSSLStartMode(int SSLStartMode);

Enumerated values:
  public final static int sslAutomatic = 0;
  public final static int sslImplicit = 1;
  public final static int sslExplicit = 2;

Default Value

0

Remarks

The SSLStartMode property may have one of the following values:

StartByte Property (IMAP Class)

This property includes the byte index of the position where the transfer should start.

Syntax

public long getStartByte();
public void setStartByte(long startByte);

Default Value

0

Remarks

StartByte and EndByte are used together with the RetrieveMessagePart method to specify the portion of the message to be retrieved from the server.

When StartByte or EndByte contain values other than the default (0), only the corresponding portion of the message is retrieved from the server.

Byte indexes start from 1. The default value for EndByte is 0, which corresponds to the end of the message.

This property is not available at design time.

Timeout Property (IMAP Class)

The timeout for the class.

Syntax

public int getTimeout();
public void setTimeout(int timeout);

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the class will wait for the operation to complete before returning control.

The class will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the class throws an exception.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

UIDMode Property (IMAP Class)

If True, this property indicates whether permanent message identifiers are used instead of the default temporary identifiers.

Syntax

public boolean isUIDMode();
public void setUIDMode(boolean UIDMode);

Default Value

False

Remarks

This property indicates if a permanent identifier should be used. Normally, the IMAP server uses temporary message identifiers that are valid only during the current session. If UIDMode is True, permanent message identifiers are used instead.

The following IMAP protocol operations use the UID mode: COPY, FETCH, STORE, and SEARCH.

This property is not available at design time.

UIDValidity Property (IMAP Class)

This property includes the UIDValidity parameter sent from the server in response to SelectMailbox command.

Syntax

public String getUIDValidity();

Default Value

""

Remarks

Every time a mailbox is selected, a UIDValidity is returned from the server. Most of the time, this value will not change from call to call. If it does change, this means that all previously returned UIDs for messages inside this mailbox are now invalid.

This property is read-only and not available at design time.

User Property (IMAP Class)

This property includes the username used to authenticate to the MailServer .

Syntax

public String getUser();
public void setUser(String user);

Default Value

""

Remarks

This property contains the username used to authenticate to the MailServer. Both the User and Password properties must be set before connecting to the MailServer.

AddMessageFlags Method (IMAP Class)

This method adds the specified flags to the messages specified by MessageSet .

Syntax

public void addMessageFlags(String flags);

Remarks

This method adds the specified flags to the messages specified by the MessageSet property. The format of the flags is specified by the IMAP RFCs.

Examples of possible flag values are server dependent, but they can include the following:

IMAPControl.MessageSet = "1" IMAPControl.AddMessageFlags("\Deleted")

AppendToMailbox Method (IMAP Class)

This method appends the message in MessageText to the mailbox specified by Mailbox .

Syntax

public void appendToMailbox();

Remarks

This method appends the RFC 822-encoded message in MessageText to the mailbox specified by Mailbox. If the MessageFlags property is not an empty string, its contents are supplied with the APPEND command sent to the server.

Example. Append Message to Mailbox:

IMAPControl.MessageText = MessageHeaders + CRLF + CRLF + MessageBody + CRLF IMAPControl.Mailbox = "INBOX" IMAPControl.MessageFlags = "\Deleted" IMAPControl.AppendToMailbox()

CheckMailbox Method (IMAP Class)

This method sends a CHECK command to the server.

Syntax

public void checkMailbox();

Remarks

This method sends a CHECK command to the server, asking it to perform any necessary housekeeping operations on and to update the state of the currently selected mailbox.

CloseMailbox Method (IMAP Class)

This method removes all messages marked with a 'Deleted' flag from the currently selected mailbox and closes the unselected mailbox.

Syntax

public void closeMailbox();

Remarks

This method permanently removes all messages that have a 'Deleted' flag that have been set from the current (selected) mailbox. It then closes (deselected) the mailbox.

Config Method (IMAP Class)

Sets or retrieves a configuration setting.

Syntax

public String config(String configurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (IMAP Class)

This method connects to an IMAP server.

Syntax

public void connect();

Remarks

This method connects to the IMAP server specified by MailServer and authenticates it using the username and password supplied in the User and Password properties.

Example. Connect IMAP Server:

IMAPControl.MailServer = "myserver" IMAPControl.Mailbox = "INBOX" IMAPControl.User = "myusername" IMAPControl.Password = "mypassword" IMAPControl.Connect() IMAPControl.MailServer = "myserver" IMAPControl.Mailbox = "DOMAIN/USERNT/INBOX" IMAPControl.User = "myusername" IMAPControl.Password = "mypassword" IMAPControl.Connect()

CopyToMailbox Method (IMAP Class)

Copies the specified messages to another mailbox.

Syntax

public void copyToMailbox();

Remarks

This method copies the messages specified by the MessageSet property to the mailbox specified by the Mailbox property.

CreateMailbox Method (IMAP Class)

This method creates a new mailbox specified by Mailbox .

Syntax

public void createMailbox();

Remarks

This method creates a new mailbox. The mailbox name is specified by the Mailbox property.

DeleteFromMailbox Method (IMAP Class)

The method marks the messages specified by MessageSet as deleted.

Syntax

public void deleteFromMailbox();

Remarks

This method marks the messages specified by MessageSet as deleted. Calling this method is equivalent to calling AddMessageFlags with "\Deleted" as the Flags parameter.

DeleteMailbox Method (IMAP Class)

This method deletes a mailbox specified by Mailbox .

Syntax

public void deleteMailbox();

Remarks

This method deletes a mailbox. The mailbox name is specified by the Mailbox property.

DeleteMailboxACL Method (IMAP Class)

This method deletes mailbox access control rights for a specific user.

Syntax

public void deleteMailboxACL(String user);

Remarks

This message asks the server to remove all rights associated with User from the mailbox specified in the Mailbox property. Refer to SetMailboxACL and GetMailboxACL for more information on mailbox access rights.

Disconnect Method (IMAP Class)

This method disconnects from an IMAP server.

Syntax

public void disconnect();

Remarks

This method logs out and disconnects from the IMAP server.

DoEvents Method (IMAP Class)

This method processes events from the internal message queue.

Syntax

public void doEvents();

Remarks

When DoEvents is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.

ExamineMailbox Method (IMAP Class)

This method selects a mailbox in read-only mode.

Syntax

public void examineMailbox();

Remarks

This method asks the server to select the mailbox specified in the Mailbox property in read-only mode.

Example 1. Open a Mailbox in Read/Write Mode:

IMAPControl.Mailbox = "INBOX" IMAPControl.SelectMailbox

Example 2. Open a Mailbox in Read-Only Mode:

IMAPControl.Mailbox = "INBOX.Folder" IMAPControl.ExamineMailbox

ExpungeMailbox Method (IMAP Class)

This method removes all messages marked with a 'Deleted' flag from the currently selected mailbox.

Syntax

public void expungeMailbox();

Remarks

This method permanently removes all messages that have a 'Deleted' flag from the current (selected) mailbox. Example. Set "Deleted" Flag and Expunge:

IMAPControl.MessageSet = "1" IMAPControl.AddMessageFlags("\Deleted") IMAPControl.ExpungeMailbox()

GetMailboxACL Method (IMAP Class)

This method retrieves mailbox access control rights.

Syntax

public void getMailboxACL();

Remarks

This method retrieves the mailbox access control rights, which are provided through one or more MailboxACL events. Standard rights include the following:

Interrupt Method (IMAP Class)

This method interrupts the current method.

Syntax

public void interrupt();

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ListMailboxes Method (IMAP Class)

This method lists all of the mailboxes matching all criteria in the Mailbox property.

Syntax

public void listMailboxes();

Remarks

This method lists all of the mailboxes matching the criteria in the Mailbox property. Matching mailboxes are returned through the MailboxList event.

Example 1. List All Mailboxes:

IMAPControl.Mailbox = "*" IMAPControl.ListMailboxes()

Example 2. List All Mailboxes Inside INBOX:

IMAPControl.Mailbox = "INBOX.*" IMAPControl.ListMailboxes()

ListSubscribedMailboxes Method (IMAP Class)

This method lists all subscribed mailboxes matching all criteria in the Mailbox property.

Syntax

public void listSubscribedMailboxes();

Remarks

This method lists all subscribed mailboxes matching the criteria in the Mailbox property. Matching mailboxes are returned through MailboxList event.

Example 1. List All Subscribed Mailboxes:

IMAPControl.Mailbox = "*" IMAPControl.ListSubscribedMailboxes()

Example 2. List All Subscribed Mailboxes Inside INBOX:

IMAPControl.Mailbox = "INBOX.*" IMAPControl.ListSubscribedMailboxes()

LocalizeDate Method (IMAP Class)

This method converts a valid RFC 822 message date to a local date and time.

Syntax

public String localizeDate(String dateTime);

Remarks

This method can be used to convert an RFC 822 date and time string to the corresponding local date and time.

Note: Dates will be returned in the format: "MM/dd/yyyy hh:mm:ss".

MoveToMailbox Method (IMAP Class)

Copies the specified messages to another mailbox and marks the original messages as deleted.

Syntax

public void moveToMailbox();

Remarks

This method copies the messages specified by the MessageSet property to the mailbox specified by the Mailbox property. Additionally, the messages in the original mailbox are marked as deleted.

Calling this method is equivalent to calling the CopyToMailbox method immediately followed by the DeleteFromMailbox method.

Noop Method (IMAP Class)

This method sends a NOOP command to the server.

Syntax

public void noop();

Remarks

This method sends an IMAP NOOP command to the server. This is useful when the connection needs to be kept alive for long periods of time. (Normally, servers break the connection automatically after 30 minutes of inactivity.)

RenameMailbox Method (IMAP Class)

This method changes the name of Mailbox to NewName .

Syntax

public void renameMailbox(String newName);

Remarks

This method allows a mailbox to be renamed. The mailbox is specified by the Mailbox property, and the new name is specified by the NewName parameter.

Reset Method (IMAP Class)

This method will reset the class.

Syntax

public void reset();

Remarks

This method will reset the class's properties to their default values.

ResetMessageFlags Method (IMAP Class)

This method replaces the flags of the messages specified by MessageSet with the flags specified by MessageFlags .

Syntax

public void resetMessageFlags();

Remarks

This method replaces the flags of the messages specified by the MessageSet property with the flags specified by the MessageFlags property. The format of the flags is specified by the IMAP RFCs.

Examples of possible flag values are server dependent, but they can include the following:

RetrieveMessageHeaders Method (IMAP Class)

This method retrieves the message headers of the messages specified by the MessageSet property.

Syntax

public void retrieveMessageHeaders();

Remarks

This method retrieves RFC 822 headers of the messages specified by MessageSet and stores them in the MessageHeaders property.

RetrieveMessageInfo Method (IMAP Class)

This method retrieves information about messages specified by the MessageSet property.

Syntax

public void retrieveMessageInfo();

Remarks

This method retrieves information for the messages specified by the MessageSet property. This includes information about the message envelope as well as message structure. Every time a message envelope is retrieved, a MessageInfo event is fired, and message envelope information is stored in properties, such as the following: MessageSubject, MessageFrom, and MessageRecipients. If the message is a multipart message, one or more MessagePart events will be fired before the MessageInfo event (one for each message part).

RetrieveMessagePart Method (IMAP Class)

This method retrieves the message part specified by PartID.

Syntax

public void retrieveMessagePart(String partId);

Remarks

This method retrieves the contents of the message part specified by the PartId property of the messages specified by the MessageSet property. If the LocalFile property contains a file name, the message part is stored in LocalFile. If the SetMessageStream property has been used to set a stream, the message part will be stored in the specified stream. If the LocalFile property is set to an empty string and the SetMessageStream property has not been set to a stream, then the message part is stored in the MessageText property. Additionally, the Transfer will also provide the message part and denote the progress of the retrieval.

The part identifiers for each message part (if any) are provided through the corresponding MessagePart events. This method retrieves the RFC 822-encoded text of the messages specified by MessageSet.

RetrieveMessagePartHeaders Method (IMAP Class)

This method retrieves the headers of message part specified by PartID.

Syntax

public void retrieveMessagePartHeaders(String partId);

Remarks

This method retrieves RFC 822 headers of the message part specified by PartID and stores them in the MessageHeaders property.

RetrieveMessageText Method (IMAP Class)

This method retrieves the message text of the messages specified by the MessageSet property.

Syntax

public void retrieveMessageText();

Remarks

This method retrieves the RFC 822-encoded text of the messages specified by MessageSet. If the LocalFile property contains a file name, the text is stored in LocalFile. If the SetMessageStream property has been used to set a stream, the text will be stored in the specified stream. If the LocalFile property is set to an empty string and the SetMessageStream property has not been set to a stream, then the text is stored in the MessageText property. Additionally, the Transfer event will also provide the text and denote the progress of the retrieval.

SearchMailbox Method (IMAP Class)

This method searches the selected mailbox for specified text.

Syntax

public void searchMailbox(String searchCriteria);

Remarks

This method searches the selected mailbox using the criteria specified in the SearchCriteria parameter. For every message matching the criteria, the RetrieveMessageInfo method is called and a MessageInfo event is fired.

The exact format of the search criteria is specified by the IMAP RFCs. The string consists of one or more search keys and their corresponding values (if any) separated by spaces, for example: "SINCE 1-Feb-1994 NOT FROM Smith".

Possible search keys include the following:

SelectMailbox Method (IMAP Class)

This method selects a mailbox.

Syntax

public void selectMailbox();

Remarks

This method asks the server to select the mailbox specified in the Mailbox property. The mailbox is selected in read/write mode (if the server permits).

Example 1. Open a Mailbox in Read/Write Mode:

IMAPControl.Mailbox = "INBOX" IMAPControl.SelectMailbox

Example 2. Open a Mailbox in Read-Only Mode:

IMAPControl.Mailbox = "INBOX.Folder" IMAPControl.ExamineMailbox

SendCommand Method (IMAP Class)

This method sends the exact command directly to the server.

Syntax

public void sendCommand(String command);

Remarks

This method sends the command specified by Command to the server exactly as it is provided. Use this method to send additional or custom commands directly to the server.

After calling this method, check the LastReply property or monitor the PITrail event to obtain the server's response.

SetMailboxACL Method (IMAP Class)

This method sets mailbox access control rights for a specific user.

Syntax

public void setMailboxACL(String user, String rights);

Remarks

This method changes the access control list for the mailbox specified in the Mailbox property so that User is granted the permissions specified in Rights.

Rights is a string containing an optional plus ("+") or minus ("-") prefix, followed by zero or more rights characters. If the string starts with a plus, the rights are added to any existing rights for the identifier. If the string starts with a minus, the rights are removed from any existing rights for the identifier. If the string does not start with a plus or minus, the rights replace any existing rights for the identifier.

Standard rights include the following:

SetMessageStream Method (IMAP Class)

This method sets the stream to which the message (or message part) downloaded from the server will be written.

Syntax

public void setMessageStream(java.io.OutputStream messageStream);

Remarks

This method sets the stream to which the message (or message part) downloaded from the server will be written. If a download stream is set before the RetrieveMessageText or RetrieveMessagePart methods are called, the downloaded data will be written to the stream. The stream should be open and normally set to position 0. The class will automatically close this stream if CloseStreamAfterTransfer is True (default). If the stream is closed, you will need to call SetMessageStream again before calling RetrieveMessageText or RetrieveMessagePart. The downloaded content will be written starting at the current position in the stream.

Note: SetMessageStream and LocalFile will reset the other.

StartIdle Method (IMAP Class)

This method begins idling.

Syntax

public void startIdle();

Remarks

This method sends the IDLE command to the server and begins idling. As responses are received from the server the IdleInfo event fires. To stop idling, call StopIdle.

StopIdle Method (IMAP Class)

This method stops idling.

Syntax

public void stopIdle();

Remarks

This method stops idling if it was previously started via StartIdle. If the class is not idling, this method does nothing.

SubscribeMailbox Method (IMAP Class)

This method subscribes to the mailbox specified by Mailbox .

Syntax

public void subscribeMailbox();

Remarks

This method subscribes to the mailbox specified by the Mailbox property.

UnsetMessageFlags Method (IMAP Class)

This method removes the flags specified by MessageFlags from the messages specified by MessageSet .

Syntax

public void unsetMessageFlags();

Remarks

This method removes the flags specified by the MessageFlags property from the messages specified by the MessageSet property. The format of the flags is specified by the IMAP RFCs.

Examples of possible flag values are server dependent, but they can include the following:

UnsubscribeMailbox Method (IMAP Class)

This method unsubscribes from the mailbox specified by Mailbox .

Syntax

public void unsubscribeMailbox();

Remarks

This method unsubscribes from the mailbox specified by the Mailbox property.

ConnectionStatus Event (IMAP Class)

Fired to indicate changes in the connection state.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void connectionStatus(IMAPConnectionStatusEvent e) {}
  ...
}

public class IMAPConnectionStatusEvent {
  public String connectionEvent;
  public int statusCode;
  public String description;
}

Remarks

This event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

EndTransfer Event (IMAP Class)

This event is fired when the message or the part data finishes transferring.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void endTransfer(IMAPEndTransferEvent e) {}
  ...
}

public class IMAPEndTransferEvent {
  public int direction;
}

Remarks

The EndTransfer event is fired when the requested message body or part completes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (IMAP Class)

Fired when information is available about errors during data delivery.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void error(IMAPErrorEvent e) {}
  ...
}

public class IMAPErrorEvent {
  public int errorCode;
  public String description;
}

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the class throws an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Header Event (IMAP Class)

This event is fired every time a header line comes in.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void header(IMAPHeaderEvent e) {}
  ...
}

public class IMAPHeaderEvent {
  public String field;
  public String value;
}

Remarks

The Field parameter contains the name of the HTTP header (in the same case as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

IdleInfo Event (IMAP Class)

This event fires whenever responses from the server are received while idling.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void idleInfo(IMAPIdleInfoEvent e) {}
  ...
}

public class IMAPIdleInfoEvent {
  public String message;
  public boolean cancel; //read-write
}

Remarks

This event fires each time a response is received from the server after calling StartIdle. This will fire with information from the server intended to update the client. The type of data sent by the server may vary.

Message holds the response received from the server.

Cancel may be set to stop idling from within the event. This is equivalent to calling StopIdle.

The following are possible values returned by the server:

+ idling
* 43 EXISTS
* 1 RECENT

MailboxACL Event (IMAP Class)

This event fires for each set of access control rights returned by the server.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void mailboxACL(IMAPMailboxACLEvent e) {}
  ...
}

public class IMAPMailboxACLEvent {
  public String mailbox;
  public String user;
  public String rights;
}

Remarks

The event fires for each set of access control rights returned by the server after a call to GetMailboxACL. Standard rights include the following:

MailboxList Event (IMAP Class)

This event fires for each mailbox received through the ListMailboxes and ListSubscribedMailboxes methods.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void mailboxList(IMAPMailboxListEvent e) {}
  ...
}

public class IMAPMailboxListEvent {
  public String mailbox;
  public String separator;
  public String flags;
}

Remarks

This method is fired for each mailbox received through the ListMailboxes and ListSubscribedMailboxes methods. The Separator parameter contains the character that separates the different parts in the mailbox path hierarchy.

MessageInfo Event (IMAP Class)

This event is fired with information for the messages retrieved by the server.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void messageInfo(IMAPMessageInfoEvent e) {}
  ...
}

public class IMAPMessageInfoEvent {
  public String messageId;
  public String subject;
  public String messageDate;
  public String from;
  public String flags;
  public long size;
}

Remarks

The MessageInfo event is fired when messages are searched, listed, or message information is received.

Id is the Id of the message.

Subject is the message subject.

MessageDate is the date of the message.

From is the email address of the sender.

Flags is a list of flags associated with this message.

Size is the size of the message.

More information may be received from the respective properties, such as the following: MessageContentType, MessageContentEncoding, MessageRecipients, MessageDeliveryTime, MessageFlags, MessageHeaders, MessageInReplyTo, MessageNetId, MessageReplyTo, MessageSender, MessageSize, MessageSubject, MessageText, etc.

MessagePart Event (IMAP Class)

This event is fired for each message part when RetrieveMessageInfo is called.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void messagePart(IMAPMessagePartEvent e) {}
  ...
}

public class IMAPMessagePartEvent {
  public String partId;
  public long size;
  public String contentType;
  public String fileName;
  public String contentEncoding;
  public String parameters;
  public String multipartMode;
  public String contentId;
  public String contentDisposition;
}

Remarks

The PartId parameter denotes the PartId that may be identified in other parts or messages. The format of PartIds is specified by the IMAP RFCs.

The Size parameter gives the size of this part.

The ContentType parameter shows the type of data contained in the part.

The ContentEncoding parameter shows how data are encoded.

The FileName parameter shows the filename corresponding to the part (if the part was included in the message as an attached file).

The Parameters parameter contains the additional parameters passed to the ContentType header, such as the part charset.

The MultipartMode parameter shows the how this part relates to the message's whole multipart structure (e.g., 'mixed', 'alternative', etc.).

The ContentId parameter shows the value of the Content-Id header for the part.

The ContentDisposition parameter shows the value of the Content-Disposition header for the part.

PITrail Event (IMAP Class)

This event traces the commands sent to the mail server, and the respective replies.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void PITrail(IMAPPITrailEvent e) {}
  ...
}

public class IMAPPITrailEvent {
  public int direction;
  public String message;
}

Remarks

The PITrail event is useful for debugging and learning purposes. It shows all of the interactions between the client and the server, line by line, except for message header and body transfers.

The Message parameter contains the full text of the message. The Direction parameter shows the originator of the message:

SSLServerAuthentication Event (IMAP Class)

Fired after the server presents its certificate to the client.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void SSLServerAuthentication(IMAPSSLServerAuthenticationEvent e) {}
  ...
}

public class IMAPSSLServerAuthenticationEvent {
  public byte[] certEncoded;
  public String certSubject;
  public String certIssuer;
  public String status;
  public boolean accept; //read-write
}

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (IMAP Class)

Fired when secure connection progress messages are available.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void SSLStatus(IMAPSSLStatusEvent e) {}
  ...
}

public class IMAPSSLStatusEvent {
  public String message;
}

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (IMAP Class)

This event is fired when the message body or the part data start transferring.

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void startTransfer(IMAPStartTransferEvent e) {}
  ...
}

public class IMAPStartTransferEvent {
  public int direction;
}

Remarks

The StartTransfer event is fired when the message body or the part data start transferring from the server to the local host. Further progress information is provided by the Transfer and EndTransfer events.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Transfer Event (IMAP Class)

This event is fired while the message is transferred from the MailServer .

Syntax

public class DefaultIMAPEventListener implements IMAPEventListener {
  ...
  public void transfer(IMAPTransferEvent e) {}
  ...
}

public class IMAPTransferEvent {
  public int direction;
  public long bytesTransferred;
  public int percentDone;
  public String text;
}

Remarks

The Transfer event is fired for every incoming line when receiving a message or part data from the MailServer

The Text parameter contains the portion of the message or the part data being retrieved.

The BytesTransferred parameter contains the number of bytes transferred since the beginning of the message, including header bytes. At the end of transmission (i.e., when the last Transfer event is fired), BytesTransferred equals the value of the MessageSize property.

The Transfer event is fired for every line of the message. There is no terminating newline at the end of the Text parameter. A faster way to retrieve a message is to assign a value to the LocalFile property and use the Transfer event to check the progress only rather than to get the actual data.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Certificate Type

This is the digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

Constructors

public Certificate();

public Certificate( certificateFile);

public Certificate( encoded);

public Certificate( storeType,  store,  storePassword,  subject);

public Certificate( storeType,  store,  storePassword,  subject,  configurationString);

public Certificate( storeType,  store,  storePassword,  encoded);

public Certificate( storeType,  store,  storePassword,  subject);

public Certificate( storeType,  store,  storePassword,  subject,  configurationString);

public Certificate( storeType,  store,  storePassword,  encoded);

Firewall Type

The firewall the class will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall, such as the firewall Host and the FirewallType.

Fields

Constructors

public Firewall();

Header Type

This is an HTTP header as it is received from the server.

Remarks

When a header is received through a Header event, it is parsed into a Header type. This type contains a Field, and its corresponding Value.

Fields

Constructors

public Header();

public Header( field,  value);

Mailbox Type

This type includes mailboxes collected when calling ListMailboxes or ListSubscribedMailboxes .

Remarks

This type includes the information for each mailbox as it is returned by the server after either ListMailboxes or ListSubscribedMailboxes have been called.

Fields

Constructors

public Mailbox();

MessageInfo Type

This is a listing of information for a message returned by the server.

Remarks

The MessageInfo event is fired when messages are searched or listed or when message information is received. When a MessageInfo event is fired, this type is returned, which contains all of the information from the message.

Fields

Constructors

public MessageInfo();

MessagePart Type

A message part of a message listing.

Remarks

Messages are split into message parts. Each MessagePart is specified by a unique identifier, namely, the Id field. Each part contains data and other fields describing that part.

Fields

Constructors

public MessagePart();

MessageRecipient Type

This types describes the message recipient.

Remarks

This type describes who the message is sent to. It includes fields to denote the name and email address of the recipient of the message. The type of recipient must also be specified if the class is sending the message.

Fields

Constructors

public MessageRecipient();

public MessageRecipient( address);

public MessageRecipient( address,  recipientType);

Config Settings (IMAP Class)

IMAP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

Trappable Errors (IMAP Class)

IMAP Errors

SSLClient Errors

SSL Errors

TCP/IP Errors