ZipSFX Module

Properties   Methods   Events   Config Settings   Errors  

The ZipSFX module implements a PKZip-compatible Zip compressor to create a self-extracting archive which will run natively on Windows platforms.

Syntax

IPWorksZip.ZipSFX

Remarks

The class uses the Deflate algorithm specified in RFC 1951 for compression, and then creates a self-extracting executable archive. This exe will bring up a dialog that will allow the user to select the target directory in which to decompress the files. There is also an optional splash screen that may be displayed before decompression. The text for this splash screen may be set with the BannerText property. You can also set the text that appears on the title bar of each dialog box using the CaptionText property.

Example (Creating a Self-Extracting Archive)

class.ArchiveFile = "c:\test.exe" class.RecurseSubdirectories = true class.SourceDirectory = "c:\foo\" class.CaptionText = "Testing ZipSFX" class.BannerText = "Press continue to decompress the archive." class.CreateSFX()

Note: When creating a self-extracting archive which exceeds 4 GB or more of uncompressed data or which contains more than 64K files, the class will create a 64-bit Zip archive.

The self-extracting archive that is created by the ZipSFX class is a Windows application. However, there are command line options available if you wish to batch multiple files. The options are:

For example, the following suppresses all questions and message boxes, and decompress to the current directory, use the following options: ZipExtractor /targetpath="." /overwrite=1 /displaymessage=0 /openfile=0 /password=pass

Note that if you run the self-extracting archive with any command line options, the pop up message box containing the BannerText will be suppressed.

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.

ArchiveFile Property (ZipSFX Module)

The name of the self-extracting zip archive to create.

Syntax

• Swift
• Objective-C

public var archiveFile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=archiveFile,setter=setArchiveFile:) NSString* archiveFile;

- (NSString*)archiveFile;
- (void)setArchiveFile :(NSString*)newArchiveFile;

Default Value

""

Remarks

This property specifies the name of the archive to be written when CreateSFX is called. Any pre-existing archive file will be overwritten.

The filename may be specified with or without a path. Paths may be relative or absolute, and should be specified in the format native to the host operating system. The filename should be specified with the appropriate ".exe" extension. An extension will not automatically be appended by the class.

If the file cannot be written a trappable error will be generated.

Example (Creating a Self-Extracting Archive)

class.ArchiveFile = "c:\test.exe" class.RecurseSubdirectories = true class.SourceDirectory = "c:\foo\" class.CaptionText = "Testing ZipSFX" class.BannerText = "Press continue to decompress the archive." class.CreateSFX()

Note: When creating a self-extracting archive which exceeds 4 GB or more of uncompressed data or which contains more than 64K files, the class will create a 64-bit Zip archive.

BannerText Property (ZipSFX Module)

Optional banner text to show before the self-extraction starts.

Syntax

• Swift
• Objective-C

public var bannerText: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=bannerText,setter=setBannerText:) NSString* bannerText;

- (NSString*)bannerText;
- (void)setBannerText :(NSString*)newBannerText;

Default Value

""

Remarks

If this property is set, a dialog box will pop up displaying the contents of this property as soon as the SFX executable is run. If this property is set to an empty string (default) no banner dialog will be displayed.

Example (Creating a Self-Extracting Archive)

class.ArchiveFile = "c:\test.exe" class.RecurseSubdirectories = true class.SourceDirectory = "c:\foo\" class.CaptionText = "Testing ZipSFX" class.BannerText = "Press continue to decompress the archive." class.CreateSFX()

CaptionText Property (ZipSFX Module)

Optional caption (title) text for the self-extractor dialogs.

Syntax

• Swift
• Objective-C

public var captionText: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=captionText,setter=setCaptionText:) NSString* captionText;

- (NSString*)captionText;
- (void)setCaptionText :(NSString*)newCaptionText;

Default Value

""

Remarks

This property contains the text which will appear on the title bar of the dialog boxes that appear when running the SFX executable file. If this property is not set, "IPWorks Zip Self Extractor - www.nsoftware.com" will appear in the title bar.

Example (Creating a Self-Extracting Archive)

class.ArchiveFile = "c:\test.exe" class.RecurseSubdirectories = true class.SourceDirectory = "c:\foo\" class.CaptionText = "Testing ZipSFX" class.BannerText = "Press continue to decompress the archive." class.CreateSFX()

CompressionLevel Property (ZipSFX Module)

The compression level to use.

Syntax

• Swift
• Objective-C

public var compressionLevel: Int32 {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=compressionLevel,setter=setCompressionLevel:) int compressionLevel;

- (int)compressionLevel;
- (void)setCompressionLevel :(int)newCompressionLevel;

Default Value

4

Remarks

This property specifies the level of compression to be used, between 0 and 6. Higher values will cause the class to compress better; lower values will cause the class to compress faster. A value of 0 will store the file without compression.

ExtractToPath Property (ZipSFX Module)

Optional target directory for the self-extractor.

Syntax

• Swift
• Objective-C

public var extractToPath: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=extractToPath,setter=setExtractToPath:) NSString* extractToPath;

- (NSString*)extractToPath;
- (void)setExtractToPath :(NSString*)newExtractToPath;

Default Value

""

Remarks

If set to empty string (default), the self-extractor will attempt to extract files into a subdirectory of the directory it is being executed from.

The name of the subdirectory is derived from the name of the self-extracting archive by removing its extension.

FileToExecute Property (ZipSFX Module)

Optional file to execute (open) after the archive is extracted.

Syntax

• Swift
• Objective-C

public var fileToExecute: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=fileToExecute,setter=setFileToExecute:) NSString* fileToExecute;

- (NSString*)fileToExecute;
- (void)setFileToExecute :(NSString*)newFileToExecute;

Default Value

"."

Remarks

This property specifies an executable file which will be run after the archive has completed decompressing. This must be a relative path to a file located within ExtractToPath. If this property is set to ".", the folder to which the archive has been decompressed will open in Windows Explorer. If this property is set to "" (empty string), the extractor will close and take no action.

Password Property (ZipSFX Module)

An optional password for the self-extracting archive.

Syntax

• Swift
• Objective-C

public var password: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=password,setter=setPassword:) NSString* password;

- (NSString*)password;
- (void)setPassword :(NSString*)newPassword;

Default Value

""

Remarks

This property specifies a case-sensitive password used to encrypt or decrypt the archive. If set to an empty string (default), no encryption is used.

The maximum supported length of the password is 128 characters.

Example (compressing an SFX archive):

class.ArchiveFile = "c:\test.exe" class.RecurseSubdirectories = true class.SourceDirectory = "c:\foo" class.Password = "nsoftware" class.CreateSFX()

RecurseSubdirectories Property (ZipSFX Module)

Whether or not to recurse into subdirectories during archive creation.

Syntax

• Swift
• Objective-C

public var recurseSubdirectories: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=recurseSubdirectories,setter=setRecurseSubdirectories:) BOOL recurseSubdirectories;

- (BOOL)recurseSubdirectories;
- (void)setRecurseSubdirectories :(BOOL)newRecurseSubdirectories;

Default Value

True

Remarks

If this property is set to true, when calling CreateSFX the class will recurse into all the subdirectories under SourceDirectory and include them in the self extracting archive. If this property is false, only the files in SourceDirectory will be included in the archive.

SourceDirectory Property (ZipSFX Module)

Directory to be compressed into a self-extracting archive.

Syntax

• Swift
• Objective-C

public var sourceDirectory: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=sourceDirectory,setter=setSourceDirectory:) NSString* sourceDirectory;

- (NSString*)sourceDirectory;
- (void)setSourceDirectory :(NSString*)newSourceDirectory;

Default Value

""

Remarks

This property specifies the name of the directory containing the files to be compressed. This may be a local or absolute path. If the RecurseSubdirectories property is true, all the subdirectories under SourceDirectory will be recursed into, and those files will also be compressed.

Example (Creating a Self-Extracting Archive)

class.ArchiveFile = "c:\test.exe" class.RecurseSubdirectories = true class.SourceDirectory = "c:\foo\" class.CaptionText = "Testing ZipSFX" class.BannerText = "Press continue to decompress the archive." class.CreateSFX()

Config Method (ZipSFX Module)

Sets or retrieves a configuration setting.

Syntax

• Swift
• Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateSFX Method (ZipSFX Module)

Compresses the files and creates a self-extracting archive.

Syntax

• Swift
• Objective-C

public func createSFX() throws -> Void

- (void)createSFX;

Remarks

Invoking CreateSFX creates the archive specified by ArchiveFile. When the method is called, all files specified by SourceDirectory will be compressed and written to ArchiveFile. If RecurseSubdirectories is true, all the subdirectories under SourceDirectory and the files they contain will also be compressed and written to ArchiveFile.

If ArchiveFile exists when you call CreateSFX it will be overwritten.

As the files in SourceDirectory are being compressed, the Progress event will fire periodically to indicate how many bytes have been processed and the percentage of compression that has been completed.

To include your own custom text on the title bar of all of the self-extractor dialog boxes, set the CaptionText before calling CreateSFX. Setting the optional BannerText property will cause a small dialog to pop up when the self-extractor is run. You can put in a description of the contents, instructions, or any text you like.

Example (Creating a Self-Extracting Archive)

class.ArchiveFile = "c:\test.exe" class.RecurseSubdirectories = true class.SourceDirectory = "c:\foo\" class.CaptionText = "Testing ZipSFX" class.BannerText = "Press continue to decompress the archive." class.CreateSFX()

Note: When creating a self-extracting archive which exceeds 4 GB or more of uncompressed data or which contains more than 64K files, the class will create a 64-bit Zip archive.

The self-extracting archive that is created by the ZipSFX class is a Windows application. However, there are command line options available if you wish to batch multiple files. The options are:

For example, the following suppresses all questions and message boxes, and decompress to the current directory, use the following options: ZipExtractor /targetpath="." /overwrite=1 /displaymessage=0 /openfile=0 /password=pass

Note that if you run the self-extracting archive with any command line options, the pop up message box containing the BannerText will be suppressed.

Reset Method (ZipSFX Module)

Resets the component.

Syntax

• Swift
• Objective-C

public func reset() throws -> Void

- (void)reset;

Remarks

Reset resets the state of the class. All properties will be set to their default values, and any files open will be closed.

Error Event (ZipSFX Module)

Information about non-fatal errors.

Syntax

• Swift
• Objective-C

func onError(description: String, errorCode: Int32, index: Int32, filename: String, ignore: inout Bool)

- (void)onError:(NSString*)description :(int)errorCode :(int)index :(NSString*)filename :(int*)ignore;

Remarks

The Error event is fired when non-fatal errors occur during compression or decompression. Note that if this event is fired during decompression this may indicate that the archive is corrupt.

By default these errors will cause the component to fail with an exception. The exception may be overridden by setting Ignore to true. This will cause the error to be ignored, the file will be skipped if necessary, and the class will continue operation.

ErrorCode will correspond to one of the following errors:

Description contains a textual description of the error. Index and Filename contain the array index (where appropriate) and filename of the file being processed at the time of the error.

Progress Event (ZipSFX Module)

Fired as progress is made.

Syntax

• Swift
• Objective-C

func onProgress(filename: String, bytesProcessed: Int64, percentProcessed: Int32)

- (void)onProgress:(NSString*)filename :(long long)bytesProcessed :(int)percentProcessed;

Remarks

The Progress event is automatically fired as compression is performed.

Filename contains the name of the file being written.

BytesProcessed contains the total number of uncompressed bytes processed.

PercentProcessed contains the percent of uncompressed bytes processed, corresponding roughly to the running time of the operation.

Config Settings (ZipSFX Module)

ZipSFX Config Settings

Base Config Settings

Trappable Errors (ZipSFX Module)

The following errors may be generated by the class. Note that frequently the error message will contain more specific information than what is listed here.

Note that some non-fatal errors may be trapped and explicitly ignored in the Error event. This will allow the class to continue operation even in case of error.

ZipSFX Errors