AS1Receiver Component

Properties   Methods   Events   Config Settings   Errors  

The AS1Receiver component is used to process AS1 messages and generate receipts.

Syntax

TibeAS1Receiver

Remarks

The AS1Receiver component allows you to receive AS1 messages as specified in RFC 3335. The component can act as an email client, decrypt and verify incoming messages, generate receipts including Message Disposition Notifications (MDNs), and send them over SMTP/S.

Basic Operation

You should first log in to your mail server by setting MailServer, User, and Password, and invoking Connect. You may then navigate your mail inbox by setting MailMessageNumber, and inspecting properties such as MailMessageFrom, etc. When you find the desired file you may download it by invoking ReadRequest. Alternatively, you may acquire the AS1 data by other means and directly set Request and RequestHeaders.

ReadRequest (or ParseHeaders) will determine information such as From and SendTo, which will allow you to set the appropriate certificates. You may specify your certificate with the Certificate property, and your trading partner's (signing) certificate with the SignerCert property.

Then, invoke ProcessRequest to process the request and generate the MDN receipt as specified in RFC 3335. If the request was processed successfully, EDIData will contain the transmitted EDI data. If a problem occurred, EDIData will not be populated and an exception will be thrown. In either case MDNReceipt will contain the RFC-compliant receipt, which should be returned to the client.

The MDNReceipt may be returned over SMTP/S by invoking SendResponse. In case the server address for incoming mail is different than that for outgoing mail you should use Config to configure this.

To create log files, set LogDirectory prior to invoking ProcessRequest. This will log all incoming and outgoing data, and will also write the received EDI files to disk.

Example AS1Receiver1.User = "myusername" AS1Receiver1.Password = "mypassword" AS1Receiver1.MailServer = "1.2.3.4" AS1Receiver1.Connect() // You may need to search the server for received files at this point AS1Receiver1.MessageNumber = 1; // You may check properties such as MailMessageFrom, etc. AS1Receiver1.ReadRequest() AS1Receiver1.Certificate = new Certificate(CertStoreTypes.cstPFXFile, "\\my_server_directory\\my_pfx_file.pfx", "my password", "CN=Me"); AS1Receiver1.SignerCert = (base 64 encoded certificate); AS1Receiver1.LogDirectory = "c:\\my_server_directory\\my_log_directory"; AS1Receiver1.ProcessRequest(); AS1Receiver1.SendResponse(); AS1Receiver1.Disconnect(); Additional functionality allows the user to examine details of the client's request, to permit certain types of errors, or to customize the outgoing MDN. See the property and method list for details.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AttachmentCount Property (AS1Receiver Component)

The number of records in the Attachment arrays.

Syntax

__property int AttachmentCount = { read=FAttachmentCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• AttachmentContentType
• AttachmentData
• AttachmentFileName
• AttachmentHeaders
• AttachmentName

The array indices start at 0 and end at AttachmentCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

AttachmentContentType Property (AS1Receiver Component)

The MIME content-type of this ediattachment .

Syntax

__property String AttachmentContentType[int AttachmentIndex] = { read=FAttachmentContentType };

Default Value

""

Remarks

The MIME content-type of this EDIAttachment.

The AttachmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachmentCount property.

This property is read-only and not available at design time.

Data Type

String

AttachmentData Property (AS1Receiver Component)

This property contains the attachment data.

Syntax

__property String AttachmentData[int AttachmentIndex] = { read=FAttachmentData };
__property DynamicArray<Byte> AttachmentDataB[int AttachmentIndex] = { read=FAttachmentDataB };

Default Value

""

Remarks

This property contains the attachment data.

In a receiver, the component decodes the attachment to the AttachmentData property when AttachmentData's value is first queried. This property will contain the full decrypted text of the attachment.

The AttachmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachmentCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

AttachmentFileName Property (AS1Receiver Component)

The file name of the attachment.

Syntax

__property String AttachmentFileName[int AttachmentIndex] = { read=FAttachmentFileName };

Default Value

""

Remarks

The file name of the attachment. If IncomingDirectory has been specified, the attachment will be written to the specified directory and the name will be provided by this property. Otherwise, this will contain the name of the attachment as described in the AttachmentHeaders.

The AttachmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachmentCount property.

This property is read-only and not available at design time.

Data Type

String

AttachmentHeaders Property (AS1Receiver Component)

The component fills out Headers each time any of the other properties for that ediattachment are changed.

Syntax

__property String AttachmentHeaders[int AttachmentIndex] = { read=FAttachmentHeaders };

Default Value

""

Remarks

The component fills out AttachmentHeaders each time any of the other properties for that EDIAttachment are changed. If additional headers are needed they should be appended after all the other propertys for that EDIAttachment are set.

The AttachmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachmentCount property.

This property is read-only and not available at design time.

Data Type

String

AttachmentName Property (AS1Receiver Component)

Name is the final name to be associated with the contents of either the Data or FileName properties.

Syntax

__property String AttachmentName[int AttachmentIndex] = { read=FAttachmentName };

Default Value

""

Remarks

AttachmentName is the final name to be associated with the contents of either the AttachmentData or AttachmentFileName properties. This corresponds to the filename attribute of the Content-Disposition header for this attachment.

The AttachmentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachmentCount property.

This property is read-only and not available at design time.

Data Type

String

CertEffectiveDate Property (AS1Receiver Component)

The date on which this certificate becomes valid.

Syntax

__property String CertEffectiveDate = { read=FCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

CertExpirationDate Property (AS1Receiver Component)

The date on which the certificate expires.

Syntax

__property String CertExpirationDate = { read=FCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

CertExtendedKeyUsage Property (AS1Receiver Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String CertExtendedKeyUsage = { read=FCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

CertFingerprint Property (AS1Receiver Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String CertFingerprint = { read=FCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

CertFingerprintSHA1 Property (AS1Receiver Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String CertFingerprintSHA1 = { read=FCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

CertFingerprintSHA256 Property (AS1Receiver Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String CertFingerprintSHA256 = { read=FCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

CertIssuer Property (AS1Receiver Component)

The issuer of the certificate.

Syntax

__property String CertIssuer = { read=FCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

CertPrivateKey Property (AS1Receiver Component)

The private key of the certificate (if available).

Syntax

__property String CertPrivateKey = { read=FCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

NOTE: The CertPrivateKey may be available but not exportable. In this case, CertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

CertPrivateKeyAvailable Property (AS1Receiver Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool CertPrivateKeyAvailable = { read=FCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a CertPrivateKey is available for the selected certificate. If CertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

CertPrivateKeyContainer Property (AS1Receiver Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String CertPrivateKeyContainer = { read=FCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the CertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

CertPublicKey Property (AS1Receiver Component)

The public key of the certificate.

Syntax

__property String CertPublicKey = { read=FCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

CertPublicKeyAlgorithm Property (AS1Receiver Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String CertPublicKeyAlgorithm = { read=FCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

CertPublicKeyLength Property (AS1Receiver Component)

The length of the certificate's public key (in bits).

Syntax

__property int CertPublicKeyLength = { read=FCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

CertSerialNumber Property (AS1Receiver Component)

The serial number of the certificate encoded as a string.

Syntax

__property String CertSerialNumber = { read=FCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

CertSignatureAlgorithm Property (AS1Receiver Component)

The text description of the certificate's signature algorithm.

Syntax

__property String CertSignatureAlgorithm = { read=FCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

CertStore Property (AS1Receiver Component)

The name of the certificate store for the client certificate.

Syntax

__property String CertStore = { read=FCertStore, write=FSetCertStore };
__property DynamicArray<Byte> CertStoreB = { read=FCertStoreB, write=FSetCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The CertStoreType property denotes the type of the certificate store specified by CertStore. If the store is password-protected, specify the password in CertStorePassword.

CertStore is used in conjunction with the CertSubject property to specify client certificates. If CertStore has a value, and CertSubject or CertEncoded is set, a search for a certificate is initiated. Please see the CertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

CertStorePassword Property (AS1Receiver Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String CertStorePassword = { read=FCertStorePassword, write=FSetCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

CertStoreType Property (AS1Receiver Component)

The type of certificate store for this certificate.

Syntax

__property TibeAS1ReceiverCertStoreTypes CertStoreType = { read=FCertStoreType, write=FSetCertStoreType };

enum TibeAS1ReceiverCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

CertSubjectAltNames Property (AS1Receiver Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String CertSubjectAltNames = { read=FCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

CertThumbprintMD5 Property (AS1Receiver Component)

The MD5 hash of the certificate.

Syntax

__property String CertThumbprintMD5 = { read=FCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

CertThumbprintSHA1 Property (AS1Receiver Component)

The SHA-1 hash of the certificate.

Syntax

__property String CertThumbprintSHA1 = { read=FCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

CertThumbprintSHA256 Property (AS1Receiver Component)

The SHA-256 hash of the certificate.

Syntax

__property String CertThumbprintSHA256 = { read=FCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

CertUsage Property (AS1Receiver Component)

The text description of UsageFlags .

Syntax

__property String CertUsage = { read=FCertUsage };

Default Value

""

Remarks

The text description of CertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

CertUsageFlags Property (AS1Receiver Component)

The flags that show intended use for the certificate.

Syntax

__property int CertUsageFlags = { read=FCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of CertUsageFlags is a combination of the following flags:

Please see the CertUsage property for a text representation of CertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

CertVersion Property (AS1Receiver Component)

The certificate's version number.

Syntax

__property String CertVersion = { read=FCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

CertSubject Property (AS1Receiver Component)

The subject of the certificate used for client authentication.

Syntax

__property String CertSubject = { read=FCertSubject, write=FSetCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

CertEncoded Property (AS1Receiver Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String CertEncoded = { read=FCertEncoded, write=FSetCertEncoded };
__property DynamicArray<Byte> CertEncodedB = { read=FCertEncodedB, write=FSetCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The CertStore and CertSubject properties also may be used to specify a certificate.

When CertEncoded is set, a search is initiated in the current CertStore for the private key of the certificate. If the key is found, CertSubject is updated to reflect the full subject of the selected certificate; otherwise, CertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

CompressionFormat Property (AS1Receiver Component)

The compression format used on the incoming message.

Syntax

__property TibeAS1ReceiverCompressionFormats CompressionFormat = { read=FCompressionFormat };

enum TibeAS1ReceiverCompressionFormats {
  cfNone=0,
  cfZLIB=1
};

Default Value

cfNone

Remarks

The compression format used on the incoming message, if any. Compressed messages will automatically be decompressed by the component.

This property is read-only.

Data Type

Integer

Connected Property (AS1Receiver Component)

Whether the component is connected.

Syntax

__property bool Connected = { read=FConnected };

Default Value

False

Remarks

This property is used to determine whether or not the component is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.

This property is read-only and not available at design time.

Data Type

Boolean

EDIData Property (AS1Receiver Component)

This property contains the EDI payload of the transmission.

Syntax

__property String EDIData = { read=FEDIData };
__property DynamicArray<Byte> EDIDataB = { read=FEDIDataB };

Default Value

""

Remarks

This property contains the EDI payload of the transmission.

In a receiver, this property will only be populated if IncomingDirectory and EDIOutputStream have not been specified and ParseRequest finishes without an error, setting ScanResult to 0. If so, Data will contain the full decrypted text of the EDI message.

This property will only be populated if ParseRequest or ProcessRequest finishes without an error, setting ScanResult to 0. If so, EDIData will contain the processed EDI message.

This property is read-only.

Data Type

Byte Array

EDIType Property (AS1Receiver Component)

The Content-Type of the EDI message.

Syntax

__property String EDIType = { read=FEDIType };

Default Value

""

Remarks

The Content-Type of the EDI message. Sample values might be "application/edi-x12", "application/edifact" or "application/xml".

This property is read-only.

Data Type

String

EDIName Property (AS1Receiver Component)

Name is the final name to be associated with the contents of either the Data or FileName properties.

Syntax

__property String EDIName = { read=FEDIName };

Default Value

"rfc1767.edi"

Remarks

EDIName is the final name to be associated with the contents of either the EDIData or EDIFileName properties. This corresponds to the filename attribute of the Content-Disposition header for the EDI payload.

When constructing EDI data to be sent, EDIName will be set to the same value as EDIFileName, but can be overridden after setting EDIFileName to indicate that another name should be used in the outbound request's Content-Disposition MIME header.

When receiving EDI data, EDIName will be read out of the "filename" attribute of the inbound request's Content-Disposition MIME header.

This property is read-only.

Data Type

String

EDIFileName Property (AS1Receiver Component)

In a sender, if FileName is specified, the file specified will be used for the EDI payload of the transmission.

Syntax

__property String EDIFileName = { read=FEDIFileName };

Default Value

""

Remarks

In a sender, if EDIFileName is specified, the file specified will be used for the EDI payload of the transmission. EDIName will be populated with the name of the file.

In a receiver, when IncomingDirectory is set, this will be populated with the absolute path of the file which contains the processed message contents.

Note: When EDIOutputStream is set, the data will be written to the stream and this property will not be populated.

This property is read-only.

Data Type

String

FirewallAutoDetect Property (AS1Receiver Component)

Whether to automatically detect and use firewall system settings, if available.

Syntax

__property bool FirewallAutoDetect = { read=FFirewallAutoDetect, write=FSetFirewallAutoDetect };

Default Value

False

Remarks

Whether to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (AS1Receiver Component)

The type of firewall to connect through.

Syntax

__property TibeAS1ReceiverFirewallTypes FirewallType = { read=FFirewallType, write=FSetFirewallType };

enum TibeAS1ReceiverFirewallTypes {
  fwNone=0,
  fwTunnel=1,
  fwSOCKS4=2,
  fwSOCKS5=3,
  fwSOCKS4A=10
};

Default Value

fwNone

Remarks

The type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (AS1Receiver Component)

The name or IP address of the firewall (optional).

Syntax

__property String FirewallHost = { read=FFirewallHost, write=FSetFirewallHost };

Default Value

""

Remarks

The name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the component raises an exception.

Data Type

String

FirewallPassword Property (AS1Receiver Component)

A password if authentication is to be used when connecting through the firewall.

Syntax

__property String FirewallPassword = { read=FFirewallPassword, write=FSetFirewallPassword };

Default Value

""

Remarks

A password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Data Type

String

FirewallPort Property (AS1Receiver Component)

The Transmission Control Protocol (TCP) port for the firewall Host .

Syntax

__property int FirewallPort = { read=FFirewallPort, write=FSetFirewallPort };

Default Value

0

Remarks

The Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

NOTE: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (AS1Receiver Component)

A username if authentication is to be used when connecting through a firewall.

Syntax

__property String FirewallUser = { read=FFirewallUser, write=FSetFirewallUser };

Default Value

""

Remarks

A username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the component raises an exception.

Data Type

String

From Property (AS1Receiver Component)

The sender of the original message.

Syntax

__property String From = { read=FFrom, write=FSetFrom };

Default Value

""

Remarks

The sender of the original message. The recipient is given by SendTo.

Note that From and SendTo correspond to the sender and recipient of the original message. For MDNs the roles are reversed, so that From indicates the recipient, and SendTo indicates the sender of the MDN.

Data Type

String

LocalHost Property (AS1Receiver Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

__property String LocalHost = { read=FLocalHost, write=FSetLocalHost };

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the component initiate connections (or accept in the case of server components) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

LogDirectory Property (AS1Receiver Component)

The path to a directory for logging.

Syntax

__property String LogDirectory = { read=FLogDirectory, write=FSetLogDirectory };

Default Value

""

Remarks

Setting LogDirectory will instruct the component to log the details of each transmission to unique files in the specified directory. For each request processed, the component will log the original EDI data, the complete text of the outgoing request and the incoming response.

The component will write a file for each transmission, with extension ".log". In case of error an additional file will be written with extension ".err", and the error will be reported in both files. Raw AS1 messages created or downloaded by the component will be written with extension ".as1", and MDNs created or downloaded will be written with extension ".as1-mdn".

The filenames will be chosen automatically by the component. Each filename will be the system time, in the format YYYY-MM-DD-HH-MM-SS-MMMM, with extensions "-2", "-3", used in case files of those names already exist. After each transaction is processed LogFile will contain the name of the files just written, minus the extension ".log" or ".err".

If logs cannot be written an exception will be thrown.

Data Type

String

LogFile Property (AS1Receiver Component)

The log file written.

Syntax

__property String LogFile = { read=FLogFile };

Default Value

""

Remarks

In case LogDirectory is specified two log files will be written in the specified directory and LogFile will contain the path.

LogFile will in fact refer to several files with appropriate extensions. A diagnostic log will be written with filename LogFile + ".log", and any EDI data read will be written with filename LogFile + ".dat". Raw AS1 messages and MDNs will also be written with extensions ".as1" and ".as1-mdn".

This property is read-only.

Data Type

String

MailMessageCc Property (AS1Receiver Component)

The value of the Cc header of the mail message.

Syntax

__property String MailMessageCc = { read=FMailMessageCc };

Default Value

""

Remarks

After calling SelectMailMessage this property will be populated with the value of the Cc header of the mail message.

This property is read-only.

Data Type

String

MailMessageCount Property (AS1Receiver Component)

The number of messages waiting in the mailbox.

Syntax

__property int MailMessageCount = { read=FMailMessageCount };

Default Value

0

Remarks

When the component is not connected to the mail server, the value of the MailMessageCount property is 0. When connected, it contains the number of messages in the mailbox. You may set MailMessageNumber to any value between 1 and MailMessageCount to inspect a given message.

This property is read-only.

Data Type

Integer

MailMessageDate Property (AS1Receiver Component)

The message date for the currently selected message.

Syntax

__property String MailMessageDate = { read=FMailMessageDate };

Default Value

""

Remarks

The date will be formatted like the following example:

Wed, 29 Dec 2004 11:58:02 +0700

This property is read-only.

Data Type

String

MailMessageFrom Property (AS1Receiver Component)

The sender of the mail message.

Syntax

__property String MailMessageFrom = { read=FMailMessageFrom };

Default Value

""

Remarks

After calling SelectMailMessage this property will be populated. When processing AS1 transmissions, this will correspond to From. When processing MDNs, this will correspond to SendTo.

This property is read-only.

Data Type

String

MailMessageHeaders Property (AS1Receiver Component)

The message headers for the currently selected message.

Syntax

__property String MailMessageHeaders = { read=FMailMessageHeaders };

Default Value

""

Remarks

After calling SelectMailMessage this property will contain the full headers of the mail message as reported by the mail server.

This property is read-only.

Data Type

String

MailMessageNumber Property (AS1Receiver Component)

The message number on the incoming mail server.

Syntax

__property int MailMessageNumber = { read=FMailMessageNumber, write=FSetMailMessageNumber };

Default Value

0

Remarks

MailMessageNumber specifies a number between 1 and MailMessageCount, and serves as a message pointer to an incoming mail message.

Set this property before calling SelectMailMessage

This property is not available at design time.

Data Type

Integer

MailMessageReplyTo Property (AS1Receiver Component)

The value of the ReplyTo header of the mail message.

Syntax

__property String MailMessageReplyTo = { read=FMailMessageReplyTo };

Default Value

""

Remarks

After calling SelectMailMessage this property will be populated with the value of the ReplyTo header of the mail message.

This property is read-only.

Data Type

String

MailMessageSubject Property (AS1Receiver Component)

The subject of the mail message.

Syntax

__property String MailMessageSubject = { read=FMailMessageSubject };

Default Value

""

Remarks

After calling SelectMailMessage this property will be populated with the subject of the mail message.

This property is read-only.

Data Type

String

MailMessageText Property (AS1Receiver Component)

The text of the mail message.

Syntax

__property String MailMessageText = { read=FMailMessageText };

Default Value

""

Remarks

The text of the mail message identified by MailMessageNumber, if it has been downloaded from the server. To read the message, invoke ReadRequest (receiver) or ReadReceipt (sender). In case the message is not as AS1 message this will throw an exception, but you may catch it and then read the value of MailMessageText.

This property is read-only.

Data Type

String

MailMessageTo Property (AS1Receiver Component)

The recipient of the mail message.

Syntax

__property String MailMessageTo = { read=FMailMessageTo };

Default Value

""

Remarks

After calling SelectMailMessage this property will be populated with the recipient of the mail message.

This property is read-only.

Data Type

String

MailServer Property (AS1Receiver Component)

The address of your mail server.

Syntax

__property String MailServer = { read=FMailServer, write=FSetMailServer };

Default Value

""

Remarks

The address of your mail server. By default, the component will send outgoing mail via SMTP, and receive incoming mail via POP. Moreover, the component will assume that both servers are located at the address specified by MailServer.

In case you use different addresses for incoming and outgoing mail you should set the POPServer and SMTPServer configuration settings appropriately. You may also set POPPort and SMTPPort in case you use nonstandard ports.

To configure SSL you should set SSLStartMode. Note that if SSL is used for sending but not receiving, or vice versa, you should set SSLStartMode each time you send or receive a file.

Data Type

String

MDNReceiptContent Property (AS1Receiver Component)

This contains the entire content of the MDN Receipt.

Syntax

__property String MDNReceiptContent = { read=FMDNReceiptContent, write=FSetMDNReceiptContent };
__property DynamicArray<Byte> MDNReceiptContentB = { read=FMDNReceiptContentB, write=FSetMDNReceiptContentB };

Default Value

""

Remarks

This contains the entire content of the MDN Receipt. This is a multipart/report entity consisting of a machine readable MDNReceiptMDN (Message Disposition Notification) and a human readable MDNReceiptMessage, which itself may be embedded in a multipart/signed entity if requested by the AS2 sender.

Data Type

Byte Array

MDNReceiptHeaderCount Property (AS1Receiver Component)

The number of headers in the MDN.

Syntax

__property int MDNReceiptHeaderCount = { read=FMDNReceiptHeaderCount };

Default Value

0

Remarks

The number of headers in the MDN.

This property is read-only and not available at design time.

Data Type

Integer

MDNReceiptHeaderField Property (AS1Receiver Component)

The property name of the MDN header currently selected by HeaderIndex .

Syntax

__property String MDNReceiptHeaderField = { read=FMDNReceiptHeaderField };

Default Value

""

Remarks

The field name of the MDN header currently selected by MDNReceiptHeaderIndex.

This property is read-only and not available at design time.

Data Type

String

MDNReceiptHeaderIndex Property (AS1Receiver Component)

Which MDN header is currently selected to populate HeaderField and HeaderValue .

Syntax

__property int MDNReceiptHeaderIndex = { read=FMDNReceiptHeaderIndex, write=FSetMDNReceiptHeaderIndex };

Default Value

0

Remarks

Which MDN header is currently selected to populate MDNReceiptHeaderField and MDNReceiptHeaderValue.

Valid values are 0 to MDNReceiptHeaderCount - 1.

This property is not available at design time.

Data Type

Integer

MDNReceiptHeaders Property (AS1Receiver Component)

Headers contains all of the headers of the AS2 MDN Receipt as a single string.

Syntax

__property String MDNReceiptHeaders = { read=FMDNReceiptHeaders, write=FSetMDNReceiptHeaders };

Default Value

""

Remarks

Headers contains all of the headers of the AS2 MDN Receipt as a single string. This will include headers such as AS2-From, AS2-To, Date, Content-Type, etc. In an AS2Sender, these will also contain the transport headers of the MDN Receipt (HTTP or SMTP headers, depending on the delivery option).

You can also use MDNReceiptHeaderCount, MDNReceiptHeaderIndex, MDNReceiptHeaderField, and MDNReceiptHeaderValue to easily iterate through each individual header.

Data Type

String

MDNReceiptHeaderValue Property (AS1Receiver Component)

The value of the MDN header currently selected by HeaderIndex .

Syntax

__property String MDNReceiptHeaderValue = { read=FMDNReceiptHeaderValue };

Default Value

""

Remarks

The value of the MDN header currently selected by MDNReceiptHeaderIndex.

This property is read-only and not available at design time.

Data Type

String

MDNReceiptMDN Property (AS1Receiver Component)

MDN will contain the entire machine readable text of the Message Disposition Notification in the receipt.

Syntax

__property String MDNReceiptMDN = { read=FMDNReceiptMDN };

Default Value

""

Remarks

MDN will contain the entire machine readable text of the Message Disposition Notification in the receipt. It will report either success or failure depending on the processing status of the receiver. In either case, it will be RFC-compliant.

This property is read-only.

Data Type

String

MDNReceiptMessage Property (AS1Receiver Component)

The human-readable portion of the MDN receipt.

Syntax

__property String MDNReceiptMessage = { read=FMDNReceiptMessage };

Default Value

""

Remarks

The human-readable portion of the MDN receipt.

The human-readable portion of the MDN receipt that indicates the status of the message processing. This can be used to provide the user with a helpful message in the event that an error is encountered.

This property is read-only.

Data Type

String

MDNReceiptMICValue Property (AS1Receiver Component)

The Message Integrity Check(s) (one-way hash) of the original EDI message.

Syntax

__property String MDNReceiptMICValue = { read=FMDNReceiptMICValue };

Default Value

""

Remarks

The Message Integrity Check(s) (one-way hash) of the original EDI message.

An MDN Receipt contains a MIC calculated over the EDI message that the receipt is in response to, to be matched on the sender side against a saved value for the original request to ensure that the integrity of the data that the receiver reports is preserved. When a signed receipt is requested, the MIC is be calculated using the algorithm used on the incoming message's signature, or SHA-1 if the incoming message is not signed.

The MIC will be base64 encoded and reported with the algorithm name as specified in RFC 3335; e.g., "w7AguNJEmhF/qIjJw6LnnA==, md5".

This property is read-only.

Data Type

String

MDNReceiptSigningProtocol Property (AS1Receiver Component)

This property contains the MIME type of the signature used, if any (i.

Syntax

__property String MDNReceiptSigningProtocol = { read=FMDNReceiptSigningProtocol };

Default Value

""

Remarks

This property contains the MIME type of the signature used, if any (i.e., "application/pkcs7-signature"), to create this MDNReceipt. It will contain an empty string if the receipt is unsigned.

This property is read-only.

Data Type

String

MDNTo Property (AS1Receiver Component)

The recipient for the Message Disposition Notification (MDN).

Syntax

__property String MDNTo = { read=FMDNTo };

Default Value

""

Remarks

MDNTo corresponds to the Disposition-Notification-To header of RequestHeaders. If nonempty, the client has requested an MDN receipt (typically the actual value is irrelevant). This receipt will be generated in a call to ProcessRequest or CreateMDNReceipt, and may be sent by calling SendResponse.

The receipt will be contained in MDNReceipt. If ReceiptDeliveryOption is empty, the receipt should be synchronously delivered in the HTTP response; otherwise, it should be delivered asynchronously to the URL specified. In either case, SendResponse will send the response as appropriate.

According to RFC specifications, MDNReceipt must be sent if requested by the client. If MDNTo is empty the MDN may be sent or not at the option of the server.

This property is read-only.

Data Type

String

MessageId Property (AS1Receiver Component)

The message ID of the incoming message.

Syntax

__property String MessageId = { read=FMessageId };

Default Value

""

Remarks

MessageId corresponds to the Message-Id header of Request, and will be used as the Original-Message-Id header of MDNReceipt.

This property is read-only.

Data Type

String

Password Property (AS1Receiver Component)

The password for your incoming mail server.

Syntax

__property String Password = { read=FPassword, write=FSetPassword };

Default Value

""

Remarks

The password for your incoming mail server. Set this before invoking Connect.

Data Type

String

Request Property (AS1Receiver Component)

The AS1 request to be processed.

Syntax

__property String Request = { read=FRequest, write=FSetRequest };
__property DynamicArray<Byte> RequestB = { read=FRequestB, write=FSetRequestB };

Default Value

""

Remarks

You may specify the request manually, or you may load the request from the mail server by invoking ReadRequest.

The headers generally should be specified separately in RequestHeaders.

Data Type

Byte Array

RequestHeaderCount Property (AS1Receiver Component)

The number of records in the RequestHeader arrays.

Syntax

__property int RequestHeaderCount = { read=FRequestHeaderCount, write=FSetRequestHeaderCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• RequestHeaderField
• RequestHeaderValue

The array indices start at 0 and end at RequestHeaderCount - 1.

This property is not available at design time.

Data Type

Integer

RequestHeaderField Property (AS1Receiver Component)

This property contains the name of the HTTP header (this is the same case as it is delivered).

Syntax

__property String RequestHeaderField[int RequestHeaderIndex] = { read=FRequestHeaderField, write=FSetRequestHeaderField };

Default Value

""

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The RequestHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the RequestHeaderCount property.

This property is not available at design time.

Data Type

String

RequestHeaderValue Property (AS1Receiver Component)

This property contains the header contents.

Syntax

__property String RequestHeaderValue[int RequestHeaderIndex] = { read=FRequestHeaderValue, write=FSetRequestHeaderValue };

Default Value

""

Remarks

This property contains the Header contents.

The RequestHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the RequestHeaderCount property.

This property is not available at design time.

Data Type

String

RequestHeadersString Property (AS1Receiver Component)

The headers in the AS1 request.

Syntax

__property String RequestHeadersString = { read=FRequestHeadersString, write=FSetRequestHeadersString };

Default Value

""

Remarks

The headers will include any and all headers attached by the mail server(s).

Data Type

String

ScanResult Property (AS1Receiver Component)

The result of invoking ParseRequest .

Syntax

__property int ScanResult = { read=FScanResult };

Default Value

0

Remarks

ScanResult will contain information about any errors that occurred while invoking ParseRequest or ProcessRequest. ScanResult will contain 0 if no errors occurred, otherwise it will contain one or more of the following errors. If multiple errors are reported the results will be OR-ed together.

This property is read-only.

Data Type

Integer

SendTo Property (AS1Receiver Component)

The recipient of the original message.

Syntax

__property String SendTo = { read=FSendTo, write=FSetSendTo };

Default Value

""

Remarks

The recipient of the original message. The originator is given by From.

Note that From and SendTo correspond to the sender and recipient of the original message. For MDNs the roles are reversed, so that From indicates the recipient, and SendTo indicates the sender of the MDN.

Data Type

String

SignerCertEffectiveDate Property (AS1Receiver Component)

The date on which this certificate becomes valid.

Syntax

__property String SignerCertEffectiveDate = { read=FSignerCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only and not available at design time.

Data Type

String

SignerCertExpirationDate Property (AS1Receiver Component)

The date on which the certificate expires.

Syntax

__property String SignerCertExpirationDate = { read=FSignerCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only and not available at design time.

Data Type

String

SignerCertExtendedKeyUsage Property (AS1Receiver Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SignerCertExtendedKeyUsage = { read=FSignerCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only and not available at design time.

Data Type

String

SignerCertFingerprint Property (AS1Receiver Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SignerCertFingerprint = { read=FSignerCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only and not available at design time.

Data Type

String

SignerCertFingerprintSHA1 Property (AS1Receiver Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SignerCertFingerprintSHA1 = { read=FSignerCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only and not available at design time.

Data Type

String

SignerCertFingerprintSHA256 Property (AS1Receiver Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SignerCertFingerprintSHA256 = { read=FSignerCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only and not available at design time.

Data Type

String

SignerCertIssuer Property (AS1Receiver Component)

The issuer of the certificate.

Syntax

__property String SignerCertIssuer = { read=FSignerCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only and not available at design time.

Data Type

String

SignerCertPrivateKey Property (AS1Receiver Component)

The private key of the certificate (if available).

Syntax

__property String SignerCertPrivateKey = { read=FSignerCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

NOTE: The SignerCertPrivateKey may be available but not exportable. In this case, SignerCertPrivateKey returns an empty string.

This property is read-only and not available at design time.

Data Type

String

SignerCertPrivateKeyAvailable Property (AS1Receiver Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SignerCertPrivateKeyAvailable = { read=FSignerCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SignerCertPrivateKey is available for the selected certificate. If SignerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only and not available at design time.

Data Type

Boolean

SignerCertPrivateKeyContainer Property (AS1Receiver Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SignerCertPrivateKeyContainer = { read=FSignerCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SignerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only and not available at design time.

Data Type

String

SignerCertPublicKey Property (AS1Receiver Component)

The public key of the certificate.

Syntax

__property String SignerCertPublicKey = { read=FSignerCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only and not available at design time.

Data Type

String

SignerCertPublicKeyAlgorithm Property (AS1Receiver Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SignerCertPublicKeyAlgorithm = { read=FSignerCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only and not available at design time.

Data Type

String

SignerCertPublicKeyLength Property (AS1Receiver Component)

The length of the certificate's public key (in bits).

Syntax

__property int SignerCertPublicKeyLength = { read=FSignerCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only and not available at design time.

Data Type

Integer

SignerCertSerialNumber Property (AS1Receiver Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SignerCertSerialNumber = { read=FSignerCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only and not available at design time.

Data Type

String

SignerCertSignatureAlgorithm Property (AS1Receiver Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SignerCertSignatureAlgorithm = { read=FSignerCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only and not available at design time.

Data Type

String

SignerCertStore Property (AS1Receiver Component)

The name of the certificate store for the client certificate.

Syntax

__property String SignerCertStore = { read=FSignerCertStore, write=FSetSignerCertStore };
__property DynamicArray<Byte> SignerCertStoreB = { read=FSignerCertStoreB, write=FSetSignerCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SignerCertStoreType property denotes the type of the certificate store specified by SignerCertStore. If the store is password-protected, specify the password in SignerCertStorePassword.

SignerCertStore is used in conjunction with the SignerCertSubject property to specify client certificates. If SignerCertStore has a value, and SignerCertSubject or SignerCertEncoded is set, a search for a certificate is initiated. Please see the SignerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

This property is not available at design time.

Data Type

Byte Array

SignerCertStorePassword Property (AS1Receiver Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SignerCertStorePassword = { read=FSignerCertStorePassword, write=FSetSignerCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is not available at design time.

Data Type

String

SignerCertStoreType Property (AS1Receiver Component)

The type of certificate store for this certificate.

Syntax

__property TibeAS1ReceiverSignerCertStoreTypes SignerCertStoreType = { read=FSignerCertStoreType, write=FSetSignerCertStoreType };

enum TibeAS1ReceiverSignerCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

This property is not available at design time.

Data Type

Integer

SignerCertSubjectAltNames Property (AS1Receiver Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SignerCertSubjectAltNames = { read=FSignerCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only and not available at design time.

Data Type

String

SignerCertThumbprintMD5 Property (AS1Receiver Component)

The MD5 hash of the certificate.

Syntax

__property String SignerCertThumbprintMD5 = { read=FSignerCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only and not available at design time.

Data Type

String

SignerCertThumbprintSHA1 Property (AS1Receiver Component)

The SHA-1 hash of the certificate.

Syntax

__property String SignerCertThumbprintSHA1 = { read=FSignerCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only and not available at design time.

Data Type

String

SignerCertThumbprintSHA256 Property (AS1Receiver Component)

The SHA-256 hash of the certificate.

Syntax

__property String SignerCertThumbprintSHA256 = { read=FSignerCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only and not available at design time.

Data Type

String

SignerCertUsage Property (AS1Receiver Component)

The text description of UsageFlags .

Syntax

__property String SignerCertUsage = { read=FSignerCertUsage };

Default Value

""

Remarks

The text description of SignerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only and not available at design time.

Data Type

String

SignerCertUsageFlags Property (AS1Receiver Component)

The flags that show intended use for the certificate.

Syntax

__property int SignerCertUsageFlags = { read=FSignerCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SignerCertUsageFlags is a combination of the following flags:

Please see the SignerCertUsage property for a text representation of SignerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only and not available at design time.

Data Type

Integer

SignerCertVersion Property (AS1Receiver Component)

The certificate's version number.

Syntax

__property String SignerCertVersion = { read=FSignerCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only and not available at design time.

Data Type

String

SignerCertSubject Property (AS1Receiver Component)

The subject of the certificate used for client authentication.

Syntax

__property String SignerCertSubject = { read=FSignerCertSubject, write=FSetSignerCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is not available at design time.

Data Type

String

SignerCertEncoded Property (AS1Receiver Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SignerCertEncoded = { read=FSignerCertEncoded, write=FSetSignerCertEncoded };
__property DynamicArray<Byte> SignerCertEncodedB = { read=FSignerCertEncodedB, write=FSetSignerCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SignerCertStore and SignerCertSubject properties also may be used to specify a certificate.

When SignerCertEncoded is set, a search is initiated in the current SignerCertStore for the private key of the certificate. If the key is found, SignerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SignerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLAcceptServerCertEffectiveDate Property (AS1Receiver Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLAcceptServerCertEffectiveDate = { read=FSSLAcceptServerCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExpirationDate Property (AS1Receiver Component)

The date on which the certificate expires.

Syntax

__property String SSLAcceptServerCertExpirationDate = { read=FSSLAcceptServerCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExtendedKeyUsage Property (AS1Receiver Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLAcceptServerCertExtendedKeyUsage = { read=FSSLAcceptServerCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprint Property (AS1Receiver Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprint = { read=FSSLAcceptServerCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA1 Property (AS1Receiver Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprintSHA1 = { read=FSSLAcceptServerCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA256 Property (AS1Receiver Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprintSHA256 = { read=FSSLAcceptServerCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLAcceptServerCertIssuer Property (AS1Receiver Component)

The issuer of the certificate.

Syntax

__property String SSLAcceptServerCertIssuer = { read=FSSLAcceptServerCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKey Property (AS1Receiver Component)

The private key of the certificate (if available).

Syntax

__property String SSLAcceptServerCertPrivateKey = { read=FSSLAcceptServerCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

NOTE: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKeyAvailable Property (AS1Receiver Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLAcceptServerCertPrivateKeyAvailable = { read=FSSLAcceptServerCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLAcceptServerCertPrivateKeyContainer Property (AS1Receiver Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLAcceptServerCertPrivateKeyContainer = { read=FSSLAcceptServerCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKey Property (AS1Receiver Component)

The public key of the certificate.

Syntax

__property String SSLAcceptServerCertPublicKey = { read=FSSLAcceptServerCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyAlgorithm Property (AS1Receiver Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLAcceptServerCertPublicKeyAlgorithm = { read=FSSLAcceptServerCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyLength Property (AS1Receiver Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLAcceptServerCertPublicKeyLength = { read=FSSLAcceptServerCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertSerialNumber Property (AS1Receiver Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLAcceptServerCertSerialNumber = { read=FSSLAcceptServerCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLAcceptServerCertSignatureAlgorithm Property (AS1Receiver Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLAcceptServerCertSignatureAlgorithm = { read=FSSLAcceptServerCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertStore Property (AS1Receiver Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLAcceptServerCertStore = { read=FSSLAcceptServerCertStore, write=FSetSSLAcceptServerCertStore };
__property DynamicArray<Byte> SSLAcceptServerCertStoreB = { read=FSSLAcceptServerCertStoreB, write=FSetSSLAcceptServerCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password-protected, specify the password in SSLAcceptServerCertStorePassword.

SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SSLAcceptServerCertStorePassword Property (AS1Receiver Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLAcceptServerCertStorePassword = { read=FSSLAcceptServerCertStorePassword, write=FSetSSLAcceptServerCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLAcceptServerCertStoreType Property (AS1Receiver Component)

The type of certificate store for this certificate.

Syntax

__property TibeAS1ReceiverSSLAcceptServerCertStoreTypes SSLAcceptServerCertStoreType = { read=FSSLAcceptServerCertStoreType, write=FSetSSLAcceptServerCertStoreType };

enum TibeAS1ReceiverSSLAcceptServerCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLAcceptServerCertSubjectAltNames Property (AS1Receiver Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLAcceptServerCertSubjectAltNames = { read=FSSLAcceptServerCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintMD5 Property (AS1Receiver Component)

The MD5 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintMD5 = { read=FSSLAcceptServerCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA1 Property (AS1Receiver Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintSHA1 = { read=FSSLAcceptServerCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA256 Property (AS1Receiver Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintSHA256 = { read=FSSLAcceptServerCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsage Property (AS1Receiver Component)

The text description of UsageFlags .

Syntax

__property String SSLAcceptServerCertUsage = { read=FSSLAcceptServerCertUsage };

Default Value

""

Remarks

The text description of SSLAcceptServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsageFlags Property (AS1Receiver Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLAcceptServerCertUsageFlags = { read=FSSLAcceptServerCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:

Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertVersion Property (AS1Receiver Component)

The certificate's version number.

Syntax

__property String SSLAcceptServerCertVersion = { read=FSSLAcceptServerCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLAcceptServerCertSubject Property (AS1Receiver Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLAcceptServerCertSubject = { read=FSSLAcceptServerCertSubject, write=FSetSSLAcceptServerCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLAcceptServerCertEncoded Property (AS1Receiver Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLAcceptServerCertEncoded = { read=FSSLAcceptServerCertEncoded, write=FSetSSLAcceptServerCertEncoded };
__property DynamicArray<Byte> SSLAcceptServerCertEncodedB = { read=FSSLAcceptServerCertEncodedB, write=FSetSSLAcceptServerCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertEffectiveDate Property (AS1Receiver Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLCertEffectiveDate = { read=FSSLCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLCertExpirationDate Property (AS1Receiver Component)

The date on which the certificate expires.

Syntax

__property String SSLCertExpirationDate = { read=FSSLCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLCertExtendedKeyUsage Property (AS1Receiver Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLCertExtendedKeyUsage = { read=FSSLCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLCertFingerprint Property (AS1Receiver Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprint = { read=FSSLCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLCertFingerprintSHA1 Property (AS1Receiver Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprintSHA1 = { read=FSSLCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLCertFingerprintSHA256 Property (AS1Receiver Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprintSHA256 = { read=FSSLCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLCertIssuer Property (AS1Receiver Component)

The issuer of the certificate.

Syntax

__property String SSLCertIssuer = { read=FSSLCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLCertPrivateKey Property (AS1Receiver Component)

The private key of the certificate (if available).

Syntax

__property String SSLCertPrivateKey = { read=FSSLCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

NOTE: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLCertPrivateKeyAvailable Property (AS1Receiver Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLCertPrivateKeyAvailable = { read=FSSLCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLCertPrivateKeyContainer Property (AS1Receiver Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLCertPrivateKeyContainer = { read=FSSLCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLCertPublicKey Property (AS1Receiver Component)

The public key of the certificate.

Syntax

__property String SSLCertPublicKey = { read=FSSLCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLCertPublicKeyAlgorithm Property (AS1Receiver Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLCertPublicKeyAlgorithm = { read=FSSLCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertPublicKeyLength Property (AS1Receiver Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLCertPublicKeyLength = { read=FSSLCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLCertSerialNumber Property (AS1Receiver Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLCertSerialNumber = { read=FSSLCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLCertSignatureAlgorithm Property (AS1Receiver Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLCertSignatureAlgorithm = { read=FSSLCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertStore Property (AS1Receiver Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore };
__property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password-protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SSLCertStorePassword Property (AS1Receiver Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (AS1Receiver Component)

The type of certificate store for this certificate.

Syntax

__property TibeAS1ReceiverSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };

enum TibeAS1ReceiverSSLCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubjectAltNames Property (AS1Receiver Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLCertSubjectAltNames = { read=FSSLCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLCertThumbprintMD5 Property (AS1Receiver Component)

The MD5 hash of the certificate.

Syntax

__property String SSLCertThumbprintMD5 = { read=FSSLCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA1 Property (AS1Receiver Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLCertThumbprintSHA1 = { read=FSSLCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA256 Property (AS1Receiver Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLCertThumbprintSHA256 = { read=FSSLCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertUsage Property (AS1Receiver Component)

The text description of UsageFlags .

Syntax

__property String SSLCertUsage = { read=FSSLCertUsage };

Default Value

""

Remarks

The text description of SSLCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLCertUsageFlags Property (AS1Receiver Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLCertUsageFlags = { read=FSSLCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:

Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLCertVersion Property (AS1Receiver Component)

The certificate's version number.

Syntax

__property String SSLCertVersion = { read=FSSLCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLCertSubject Property (AS1Receiver Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLCertEncoded Property (AS1Receiver Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded };
__property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLProvider Property (AS1Receiver Component)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

__property TibeAS1ReceiverSSLProviders SSLProvider = { read=FSSLProvider, write=FSetSSLProvider };

enum TibeAS1ReceiverSSLProviders {
  sslpAutomatic=0,
  sslpPlatform=1,
  sslpInternal=2
};

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

Data Type

Integer

SSLServerCertEffectiveDate Property (AS1Receiver Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLServerCertEffectiveDate = { read=FSSLServerCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExpirationDate Property (AS1Receiver Component)

The date on which the certificate expires.

Syntax

__property String SSLServerCertExpirationDate = { read=FSSLServerCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExtendedKeyUsage Property (AS1Receiver Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLServerCertExtendedKeyUsage = { read=FSSLServerCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLServerCertFingerprint Property (AS1Receiver Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprint = { read=FSSLServerCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA1 Property (AS1Receiver Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprintSHA1 = { read=FSSLServerCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA256 Property (AS1Receiver Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprintSHA256 = { read=FSSLServerCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLServerCertIssuer Property (AS1Receiver Component)

The issuer of the certificate.

Syntax

__property String SSLServerCertIssuer = { read=FSSLServerCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLServerCertPrivateKey Property (AS1Receiver Component)

The private key of the certificate (if available).

Syntax

__property String SSLServerCertPrivateKey = { read=FSSLServerCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

NOTE: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLServerCertPrivateKeyAvailable Property (AS1Receiver Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLServerCertPrivateKeyAvailable = { read=FSSLServerCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLServerCertPrivateKeyContainer Property (AS1Receiver Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLServerCertPrivateKeyContainer = { read=FSSLServerCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLServerCertPublicKey Property (AS1Receiver Component)

The public key of the certificate.

Syntax

__property String SSLServerCertPublicKey = { read=FSSLServerCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyAlgorithm Property (AS1Receiver Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLServerCertPublicKeyAlgorithm = { read=FSSLServerCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyLength Property (AS1Receiver Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLServerCertPublicKeyLength = { read=FSSLServerCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLServerCertSerialNumber Property (AS1Receiver Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLServerCertSerialNumber = { read=FSSLServerCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLServerCertSignatureAlgorithm Property (AS1Receiver Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLServerCertSignatureAlgorithm = { read=FSSLServerCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertStore Property (AS1Receiver Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLServerCertStore = { read=FSSLServerCertStore };
__property DynamicArray<Byte> SSLServerCertStoreB = { read=FSSLServerCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password-protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

This property is read-only.

Data Type

Byte Array

SSLServerCertStorePassword Property (AS1Receiver Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLServerCertStorePassword = { read=FSSLServerCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

SSLServerCertStoreType Property (AS1Receiver Component)

The type of certificate store for this certificate.

Syntax

__property TibeAS1ReceiverSSLServerCertStoreTypes SSLServerCertStoreType = { read=FSSLServerCertStoreType };

enum TibeAS1ReceiverSSLServerCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

Integer

SSLServerCertSubjectAltNames Property (AS1Receiver Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLServerCertSubjectAltNames = { read=FSSLServerCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLServerCertThumbprintMD5 Property (AS1Receiver Component)

The MD5 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintMD5 = { read=FSSLServerCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA1 Property (AS1Receiver Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintSHA1 = { read=FSSLServerCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA256 Property (AS1Receiver Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintSHA256 = { read=FSSLServerCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertUsage Property (AS1Receiver Component)

The text description of UsageFlags .

Syntax

__property String SSLServerCertUsage = { read=FSSLServerCertUsage };

Default Value

""

Remarks

The text description of SSLServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLServerCertUsageFlags Property (AS1Receiver Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLServerCertUsageFlags = { read=FSSLServerCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:

Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLServerCertVersion Property (AS1Receiver Component)

The certificate's version number.

Syntax

__property String SSLServerCertVersion = { read=FSSLServerCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLServerCertSubject Property (AS1Receiver Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLServerCertSubject = { read=FSSLServerCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=example@email.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

SSLServerCertEncoded Property (AS1Receiver Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLServerCertEncoded = { read=FSSLServerCertEncoded };
__property DynamicArray<Byte> SSLServerCertEncodedB = { read=FSSLServerCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Byte Array

SSLStartMode Property (AS1Receiver Component)

Determines how the component starts the SSL negotiation. By default, SSL will not be used.

Syntax

__property TibeAS1ReceiverSSLStartModes SSLStartMode = { read=FSSLStartMode, write=FSetSSLStartMode };

enum TibeAS1ReceiverSSLStartModes {
  sslAutomatic=0,
  sslImplicit=1,
  sslExplicit=2,
  sslNone=3
};

Default Value

sslNone

Remarks

The SSLStartMode property may have one of the following values:

Data Type

Integer

User Property (AS1Receiver Component)

The username for your incoming mail server.

Syntax

__property String User = { read=FUser, write=FSetUser };

Default Value

""

Remarks

The username for your incoming mail server. Set this before invoking Connect.

Data Type

String

Config Method (AS1Receiver Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (AS1Receiver Component)

Connects to the incoming mail server.

Syntax

void __fastcall Connect();

Remarks

Connects to the incoming mail server specified by MailServer. You must set User and Password prior to calling Connect. The connection will be maintained until you call Disconnect.

If you wish to connect in SSL you should first set the SSLStartMode property. Note that it is not necessary to explicitly connect to an SMTP server for outgoing mail; a connection will be created and destroyed each time a mail is sent.

CreateMDNReceipt Method (AS1Receiver Component)

Creates MDNReceipt .

Syntax

void __fastcall CreateMDNReceipt(String Headers, String MDN, String Message);

Remarks

CreateMDNReceipt may be invoked after ParseRequest to create an MDN-based receipt. The receipt will report success or failure depending on ErrorReportingFlags and the success or failure of ParseRequest.

This method populates MDNReceipt with a new MDNReceipt. The Headers, MDN, and Message parameters can be used to further customize the receipt, or empty string ("") parameters may be set to use the component generated defaults. Headers will set additional transport headers to be sent with the receipt (in the HTTP or SMTP headers of the signed receipt). MDN can be used to append additional headers to the Message Disposition Notification portion of the MDN Receipt. If MDN is set to a value prefixed with an at sign ("@"), the at sign will be removed and the specified MDN will be used in the receipt in place of the component generated value. Message will set the human-readable portion of the receipt, and should describe any error conditions that may have occurred.

DeleteMessage Method (AS1Receiver Component)

Deletes the message specified by MailMessageNumber .

Syntax

void __fastcall DeleteMessage();

Remarks

Requests that the MailServer delete the message specified by MailMessageNumber. The message will not actually be deleted until the connection is closed.

Disconnect Method (AS1Receiver Component)

Disconnects from the incoming mail server.

Syntax

void __fastcall Disconnect();

Remarks

Disconnects from the incoming mail server specified by MailServer.

ParseRequest Method (AS1Receiver Component)

Parses the EDI message and determines the EDIData .

Syntax

void __fastcall ParseRequest();

Remarks

Processes the EDI message in the request (either from the HTTP context, or as given by Request and possibly RequestHeadersString). If the message is encrypted, it will be decrypted with the certificate specified in Certificate. If it is signed, the signature will be verified against the certificate specified in SignerCert.

If the message is scanned without difficulty, EDIData will be populated. If a problem occurs, an exception will be thrown. This might occur if the client used or requested unsupported algorithms or data formats. In this case, EDIData will not be determined.

The component may be configured to ignore certain errors by setting ErrorProcessingFlags. This will allow the message to be processed and EDIData to be determined. If any errors occur, an exception will be thrown and the ScanResult property will reflect the error condition.

Whether or not an exception is thrown, an MDNReceipt may be generated by invoking CreateMDNReceipt. In the case of a successful scan MDNReceipt will report the success, otherwise the receipt will provide information to the client about the error.

ProcessRequest may be used to scan and create the receipt in one step. ReadRequest may be used to scan the request headers only to obtain details that can be used to configure the correct settings for the partner.

ProcessQueue Method (AS1Receiver Component)

Send the messages queued for sending.

Syntax

void __fastcall ProcessQueue(String Directory);

Remarks

Invoking ProcessQueue sends the messages that have been queued by Queue.

ProcessRequest Method (AS1Receiver Component)

Processes the EDI data, and generates the receipt.

Syntax

void __fastcall ProcessRequest();

Remarks

Invoking ProcessRequest automates the entire AS2 server process. The method scans the request, determines the EDIData, and generates the MDNReceipt. In a server environment the receipt may be returned by invoking SendResponse.

The method's functionality is the same as the combined functionality of ParseRequest and CreateMDNReceipt. The method's operation is controlled by ErrorProcessingFlags and ErrorReportingFlags, and ScanResult will be populated as in ParseRequest.

The method will throw an exception, as ParseRequest does, if a problem is found while processing the request. However, if the problem does not prevent an MDN from being generated, MDNReceipt will still be generated before the exception is thrown. In all cases, the receipt will be suitable for returning to the client. If an exception is thrown, the MDNReceipt will provide more detail on the cause of the error.

The component will populate EDIData if no errors occurred scanning the request, or if ErrorProcessingFlags had been previously configured to allow the error.

QueryMessageSize Method (AS1Receiver Component)

Returns the size in bytes of the current message.

Syntax

int __fastcall QueryMessageSize();

Remarks

This method queries the server for the size in bytes of the message specified by MailMessageNumber. The method returns the size (in bytes) of the message.

QueryMessageUID Method (AS1Receiver Component)

Returns the unique identifier of the message as specified by the server.

Syntax

String __fastcall QueryMessageUID();

Remarks

This method returns the unique identifier of the message specified by MailMessageNumber.

Queue Method (AS1Receiver Component)

Prepares and queues the message to the specified directory.

Syntax

void __fastcall Queue(String Directory);

Remarks

Invoking Queue will prepare and queue the AS1 message. It will be signed if SigningCert is set, encrypted if RecipientCert is set, and compressed if CompressionFormat is set. A receipt will be requested if MDNTo is set. The queued message can then be sent by invoking ProcessQueue.

ReadRequest Method (AS1Receiver Component)

Reads the AS1 request from the mail server.

Syntax

void __fastcall ReadRequest();

Remarks

In the Java edition, ReadRequest will retrieve the file specified by MailMessageNumber from the mail server. The request will be stored in Request and the headers in RequestHeaders. The headers will also be parsed as in ParseHeaders, and the appropriate values of From, SendTo, etc., will be populated. After looking up and setting your trading partner information (such as certificates) you may then call ProcessRequest.

Reset Method (AS1Receiver Component)

Resets the state of the control.

Syntax

void __fastcall Reset();

Remarks

Reset resets the state of the component. All properties will be set to their default values.

SelectMailMessage Method (AS1Receiver Component)

Selects and obtains information about the specified message.

Syntax

void __fastcall SelectMailMessage();

Remarks

This method selects the message specified by MailMessageNumber and retrieves information about it.

After calling this method properties such as MailMessageHeaders, MailMessageDate, MailMessageFrom, etc., allow you to determine if this message is an AS1 message. Additional properties are exposed via the Config method.

If this message is an AS1 transmission, you may use ReadRequest to read it. The Request and RequestHeaders properties will contain the request and request headers, and From will be populated with the originator of the request. You may then set trading partner information and invoke ProcessRequest to process the request.

SendResponse Method (AS1Receiver Component)

Sends the MDN receipt.

Syntax

void __fastcall SendResponse();

Remarks

Sends the MDN receipt specified by MDNReceipt. The receipt will be created when invoking ProcessRequest or CreateMDNReceipt.

By default, the component will assume that the SMTP server is located at the same address as the incoming mail server. The SMTPServer and SMTPPort settings can be used to set a different address or to use a non default port.

A response will only be sent if requested by the client. The MDN will be directed to the From address that sent the request, regardless of the MDNTo value. If MDNTo is empty, this method will do nothing.

ConnectionStatus Event (AS1Receiver Component)

Fired to indicate changes in the connection state.

Syntax

typedef struct {
  String ConnectionEvent;
  int StatusCode;
  String Description;
} TibeAS1ReceiverConnectionStatusEventParams;
typedef void __fastcall (__closure *TibeAS1ReceiverConnectionStatusEvent)(System::TObject* Sender, TibeAS1ReceiverConnectionStatusEventParams *e);
__property TibeAS1ReceiverConnectionStatusEvent OnConnectionStatus = { read=FOnConnectionStatus, write=FOnConnectionStatus };

Remarks

This event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

EndTransfer Event (AS1Receiver Component)

Fired when the message text completes transferring.

Syntax

typedef struct {
} TibeAS1ReceiverEndTransferEventParams;
typedef void __fastcall (__closure *TibeAS1ReceiverEndTransferEvent)(System::TObject* Sender, TibeAS1ReceiverEndTransferEventParams *e);
__property TibeAS1ReceiverEndTransferEvent OnEndTransfer = { read=FOnEndTransfer, write=FOnEndTransfer };

Remarks

Fired when the message text completes transferring (on either a send or receive).

Error Event (AS1Receiver Component)

Fired when information is available about errors during data delivery.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TibeAS1ReceiverErrorEventParams;
typedef void __fastcall (__closure *TibeAS1ReceiverErrorEvent)(System::TObject* Sender, TibeAS1ReceiverErrorEventParams *e);
__property TibeAS1ReceiverErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Header Event (AS1Receiver Component)

This event is fired for every message header being retrieved.

Syntax

typedef struct {
  String Field;
  String Value;
} TibeAS1ReceiverHeaderEventParams;
typedef void __fastcall (__closure *TibeAS1ReceiverHeaderEvent)(System::TObject* Sender, TibeAS1ReceiverHeaderEventParams *e);
__property TibeAS1ReceiverHeaderEvent OnHeader = { read=FOnHeader, write=FOnHeader };

Remarks

The Field parameter contains the name of the header (in the same case as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

Log Event (AS1Receiver Component)

Fired with log information while processing a message.

Syntax

typedef struct {
  String LogType;
  String LogMessage;
  DynamicArray<Byte> LogMessageB;
} TibeAS1ReceiverLogEventParams;
typedef void __fastcall (__closure *TibeAS1ReceiverLogEvent)(System::TObject* Sender, TibeAS1ReceiverLogEventParams *e);
__property TibeAS1ReceiverLogEvent OnLog = { read=FOnLog, write=FOnLog };

Remarks

This event fires once for each log message generated by the component. The verbosity is controlled by the LogLevel setting.

Log messages available through this event correspond to log files written to LogDirectory. This event provides a way to obtain log messages without relying on files on disk. This event fires regardless of the value of LogDirectory (i.e. when LogDirectory is empty the event will still fire).

The LogMessage event parameter holds the raw log data.

The LogType event parameter indicates the type of log. Possible values are:

PITrail Event (AS1Receiver Component)

This event traces the commands sent to the mail server, and the respective replies.

Syntax

typedef struct {
  int Direction;
  String Message;
} TibeAS1ReceiverPITrailEventParams;
typedef void __fastcall (__closure *TibeAS1ReceiverPITrailEvent)(System::TObject* Sender, TibeAS1ReceiverPITrailEventParams *e);
__property TibeAS1ReceiverPITrailEvent OnPITrail = { read=FOnPITrail, write=FOnPITrail };

Remarks

The PITrail event is useful for debugging purposes. It shows all of the interaction between the client and the server, line by line, except for message header and body transfers.

The Message parameter contains the full text of the message. The Direction parameter shows the originator of the message:

SignerCertInfo Event (AS1Receiver Component)

This event is fired during verification of the signed message.

Syntax

typedef struct {
  String Issuer;
  String SerialNumber;
  String SubjectKeyIdentifier;
  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;
} TibeAS1ReceiverSignerCertInfoEventParams;
typedef void __fastcall (__closure *TibeAS1ReceiverSignerCertInfoEvent)(System::TObject* Sender, TibeAS1ReceiverSignerCertInfoEventParams *e);
__property TibeAS1ReceiverSignerCertInfoEvent OnSignerCertInfo = { read=FOnSignerCertInfo, write=FOnSignerCertInfo };

Remarks

During verification, this event will be raised while parsing the signer's certificate information. The parameters that are populated depend on the options used when the message was originally signed. This information may be used to select the correct certificate for SignerCert to verify the signature. The following parameters may be populated:

Issuer specifies the subject of the issuer of the certificate used to sign the message.

SerialNumber is the serial number of the certificate used to sign the message.

SubjectKeyIdentifier is the X.509 subjectKeyIdentifier extension value of the certificate used to sign the message encoded as a hex string.

CertEncoded is the PEM (Base64 encoded) public certificate needed to verify the signature.

NOTE: When this value is present, the component will automatically use this value to perform signature verification.

The SignerCert property may be set from within this event. In this manner, the decision of which signer certificate to load may be delayed until the parameters of this event are inspected and the correct certificate can be located and loaded.

SSLServerAuthentication Event (AS1Receiver Component)

Fired after the server presents its certificate to the client.

Syntax

typedef struct {
  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;
  String CertSubject;
  String CertIssuer;
  String Status;
  bool Accept;
} TibeAS1ReceiverSSLServerAuthenticationEventParams;
typedef void __fastcall (__closure *TibeAS1ReceiverSSLServerAuthenticationEvent)(System::TObject* Sender, TibeAS1ReceiverSSLServerAuthenticationEventParams *e);
__property TibeAS1ReceiverSSLServerAuthenticationEvent OnSSLServerAuthentication = { read=FOnSSLServerAuthentication, write=FOnSSLServerAuthentication };

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (AS1Receiver Component)

Fired when secure connection progress messages are available.

Syntax

typedef struct {
  String Message;
} TibeAS1ReceiverSSLStatusEventParams;
typedef void __fastcall (__closure *TibeAS1ReceiverSSLStatusEvent)(System::TObject* Sender, TibeAS1ReceiverSSLStatusEventParams *e);
__property TibeAS1ReceiverSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (AS1Receiver Component)

Fired when the message text starts transferring (on either a send or receive).

Syntax

typedef struct {
} TibeAS1ReceiverStartTransferEventParams;
typedef void __fastcall (__closure *TibeAS1ReceiverStartTransferEvent)(System::TObject* Sender, TibeAS1ReceiverStartTransferEventParams *e);
__property TibeAS1ReceiverStartTransferEvent OnStartTransfer = { read=FOnStartTransfer, write=FOnStartTransfer };

Remarks

Fired when the message text starts transferring (on either a send or receive).

Transfer Event (AS1Receiver Component)

Fired while the message text gets transferred to or from MailServer .

Syntax

typedef struct {
  __int64 BytesTransferred;
} TibeAS1ReceiverTransferEventParams;
typedef void __fastcall (__closure *TibeAS1ReceiverTransferEvent)(System::TObject* Sender, TibeAS1ReceiverTransferEventParams *e);
__property TibeAS1ReceiverTransferEvent OnTransfer = { read=FOnTransfer, write=FOnTransfer };

Remarks

Fired while the message text gets transferred to or from MailServer.

Config Settings (AS1Receiver Component)

AS1Receiver Config Settings

AS1 Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Base Config Settings

Trappable Errors (AS1Receiver Component)

AS1Receiver Errors

POP Errors

The component may also return one of the following error codes, which are inherited from other components.

TCPClient Errors

TCP/IP Errors

SMTP Errors

The component may also return one of the following error codes, which are inherited from other components.

TCPClient Errors

TCP/IP Errors

SMIME Errors