AmazonSecrets Component

Properties   Methods   Events   Config Settings   Errors  

The AmazonSecrets component provides an easy-to-use interface for Amazon's Secrets Manager service.

Syntax

TckAmazonSecrets

Remarks

The AmazonSecrets component makes it easy to work with the Amazon Secrets Manager service in a secure manner using TLS. Amazon Secrets Manager allows you to securely store secrets (e.g., passwords, symmetric keys, etc.) in the cloud so that the aren't persisted locally. This component helps you to create, manage, and access those secrets.

To begin, register for an AWS account and obtain an AccessKey and SecretKey to use for authentication.

Resource Terminology

A secret in Amazon Secrets Manager is a container for one or more secret versions, which is where secret data is actually stored. Each secret version can have between zero and 20 staging labels attached to it at any given time.

A staging label is a simple string that can be used instead of a version Id to refer to a particular secret version when retrieving secret data. A staging label can only be attached to one version of a secret at any given time. The server ensures that there is always exactly one version of a secret with the special staging label AWSCURRENT, but otherwise you are free to apply any staging labels to any secret versions you choose.

Secret versions that do not have any staging labels attached to them are considered deprecated, and the server may delete them at any time without warning. Deprecated secret versions are not shown in a secret's version list unless explicitly asked for.

Using the Component

The CreateSecret method will create a new secret with an initial secret version that holds the specified secret data. To change a secret's data, create a new version of it using the CreateVersion method.

To retrieve a secret's data, call the GetSecret method, and specify the specific version (either by Id or using a staging label) whose data should be retrieved. If no particular version is specified, the version with the AWSCURRENT staging label is used.

Secrets that will no longer be used can be deleted using the DeleteSecret method, either immediately or after a waiting period. If a secret is scheduled for deletion later, then during said waiting period the deletion can be canceled using CancelDeletion. // Creates a new secret with the textual data "Test123" named MySecret. // The initial secret version will have only the "AWSCURRENT" staging label. amazonsecrets.SecretString = "Test123"; amazonsecrets.CreateSecret("MySecret", "A description of my secret."); // Creates a new secret version with the textual data "Cats456" and // attaches the staging labels "AWSCURRENT" (which gets moved from the previous version) // and "best-version" to it. amazonsecrets.SecretString = "Cats456"; amazonsecrets.CreateVersion("MySecret", "AWSCURRENT,best-version"); // Downloads the latest secret version's data to a local file. amazonsecrets.LocalFile = "C:\temp\secret.txt"; amazonsecrets.GetSecret("MySecret", "", ""); // Schedules the secret, and all its versions, for deletion after 10 days. amazonsecrets.DeleteSecret("MySecret", 10); // Cancels the scheduled deletion. amazonsecrets.CancelDeletion("MySecret");

To list secrets, use the ListSecrets method. To list a secret's versions, use the ListVersions method. // If there are many secrets to list, there may be multiple pages of results. This will // cause all pages of results to be accumulated into the Secrets collection property. do { amazonsecrets.ListSecrets(); } while (!string.IsNullOrEmpty(amazonsecrets.SecretMarker)); // A similar thing applies to secret versions as well. do { amazonsecrets.ListVersions("MySecret"); } while (!string.IsNullOrEmpty(amazonsecrets.VersionMarker));

The component also supports other functionality, including:

• Adding, removing, and moving staging labels between secret versions using MoveStagingLabel.
• Retrieval of information for a single secret with GetSecretInfo.
• Random password generation using GenRandomPassword.
• And more!

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AccessKey Property (AmazonSecrets Component)

The access key to use for authentication.

Syntax

__property String AccessKey = { read=FAccessKey, write=FSetAccessKey };

Default Value

""

Remarks

This property specifies the access key that should be used for authentication. Both this property and SecretKey must be set before attempting any operations which connect to the server.

Data Type

String

FirewallAutoDetect Property (AmazonSecrets Component)

Whether to automatically detect and use firewall system settings, if available.

Syntax

__property bool FirewallAutoDetect = { read=FFirewallAutoDetect, write=FSetFirewallAutoDetect };

Default Value

False

Remarks

Whether to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (AmazonSecrets Component)

The type of firewall to connect through.

Syntax

__property TckAmazonSecretsFirewallTypes FirewallType = { read=FFirewallType, write=FSetFirewallType };

enum TckAmazonSecretsFirewallTypes {
  fwNone=0,
  fwTunnel=1,
  fwSOCKS4=2,
  fwSOCKS5=3,
  fwSOCKS4A=10
};

Default Value

fwNone

Remarks

The type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (AmazonSecrets Component)

The name or IP address of the firewall (optional).

Syntax

__property String FirewallHost = { read=FFirewallHost, write=FSetFirewallHost };

Default Value

""

Remarks

The name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the component raises an exception.

Data Type

String

FirewallPassword Property (AmazonSecrets Component)

A password if authentication is to be used when connecting through the firewall.

Syntax

__property String FirewallPassword = { read=FFirewallPassword, write=FSetFirewallPassword };

Default Value

""

Remarks

A password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Data Type

String

FirewallPort Property (AmazonSecrets Component)

The Transmission Control Protocol (TCP) port for the firewall Host .

Syntax

__property int FirewallPort = { read=FFirewallPort, write=FSetFirewallPort };

Default Value

0

Remarks

The Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (AmazonSecrets Component)

A username if authentication is to be used when connecting through a firewall.

Syntax

__property String FirewallUser = { read=FFirewallUser, write=FSetFirewallUser };

Default Value

""

Remarks

A username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the component raises an exception.

Data Type

String

Idle Property (AmazonSecrets Component)

The current status of the component.

Syntax

__property bool Idle = { read=FIdle };

Default Value

True

Remarks

This property will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.

This property is read-only.

Data Type

Boolean

LocalFile Property (AmazonSecrets Component)

The local file to write data to, or whose data should be sent.

Syntax

__property String LocalFile = { read=FLocalFile, write=FSetLocalFile };

Default Value

""

Remarks

This property specifies the location of a local file on disk. This is used as the source file when calling CreateSecret or CreateVersion, and as the destination file when calling GetSecret.

When creating a secret, the component assumes that data specified via a local file is binary in nature; the PreferBinary configuration setting can be used to control this behavior, refer to its documentation for more information.

Data Type

String

LocalHost Property (AmazonSecrets Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

__property String LocalHost = { read=FLocalHost, write=FSetLocalHost };

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the component initiate connections (or accept in the case of server components) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

OtherHeaders Property (AmazonSecrets Component)

Other headers as determined by the user (optional).

Syntax

__property String OtherHeaders = { read=FOtherHeaders, write=FSetOtherHeaders };

Default Value

""

Remarks

This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like ContentType and From.

The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") .

Use this property with caution. If this property contains invalid headers, HTTP requests may fail.

This property is useful for extending the functionality of the component beyond what is provided.

This property is not available at design time.

Data Type

String

Overwrite Property (AmazonSecrets Component)

Whether the local file should be overwritten if necessary.

Syntax

__property bool Overwrite = { read=FOverwrite, write=FSetOverwrite };

Default Value

false

Remarks

This property controls whether the specified LocalFile should be overwritten if it already exists.

This property is not available at design time.

Data Type

Boolean

ParsedHeaderCount Property (AmazonSecrets Component)

The number of records in the ParsedHeader arrays.

Syntax

__property int ParsedHeaderCount = { read=FParsedHeaderCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• ParsedHeaderField
• ParsedHeaderValue

The array indices start at 0 and end at ParsedHeaderCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ParsedHeaderField Property (AmazonSecrets Component)

This property contains the name of the HTTP header (this is the same case as it is delivered).

Syntax

__property String ParsedHeaderField[int ParsedHeaderIndex] = { read=FParsedHeaderField };

Default Value

""

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The ParsedHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ParsedHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

ParsedHeaderValue Property (AmazonSecrets Component)

This property contains the header contents.

Syntax

__property String ParsedHeaderValue[int ParsedHeaderIndex] = { read=FParsedHeaderValue };

Default Value

""

Remarks

This property contains the Header contents.

The ParsedHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ParsedHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

ProxyAuthScheme Property (AmazonSecrets Component)

The type of authorization to perform when connecting to the proxy.

Syntax

__property TckAmazonSecretsProxyAuthSchemes ProxyAuthScheme = { read=FProxyAuthScheme, write=FSetProxyAuthScheme };

enum TckAmazonSecretsProxyAuthSchemes {
  authBasic=0,
  authDigest=1,
  authProprietary=2,
  authNone=3,
  authNtlm=4,
  authNegotiate=5
};

Default Value

authBasic

Remarks

The type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the component will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the component. Look at the configuration file for the component being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (AmazonSecrets Component)

Whether to automatically detect and use proxy system settings, if available.

Syntax

__property bool ProxyAutoDetect = { read=FProxyAutoDetect, write=FSetProxyAutoDetect };

Default Value

False

Remarks

Whether to automatically detect and use proxy system settings, if available. The default value is false.

Data Type

Boolean

ProxyPassword Property (AmazonSecrets Component)

A password if authentication is to be used for the proxy.

Syntax

__property String ProxyPassword = { read=FProxyPassword, write=FSetProxyPassword };

Default Value

""

Remarks

A password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (AmazonSecrets Component)

The Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

__property int ProxyPort = { read=FProxyPort, write=FSetProxyPort };

Default Value

80

Remarks

The Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (AmazonSecrets Component)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

__property String ProxyServer = { read=FProxyServer, write=FSetProxyServer };

Default Value

""

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (AmazonSecrets Component)

When to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

__property TckAmazonSecretsProxySSLs ProxySSL = { read=FProxySSL, write=FSetProxySSL };

enum TckAmazonSecretsProxySSLs {
  psAutomatic=0,
  psAlways=1,
  psNever=2,
  psTunnel=3
};

Default Value

psAutomatic

Remarks

When to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

Data Type

Integer

ProxyUser Property (AmazonSecrets Component)

A username if authentication is to be used for the proxy.

Syntax

__property String ProxyUser = { read=FProxyUser, write=FSetProxyUser };

Default Value

""

Remarks

A username if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

QueryParamCount Property (AmazonSecrets Component)

The number of records in the QueryParam arrays.

Syntax

__property int QueryParamCount = { read=FQueryParamCount, write=FSetQueryParamCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• QueryParamName
• QueryParamValue

The array indices start at 0 and end at QueryParamCount - 1.

This property is not available at design time.

Data Type

Integer

QueryParamName Property (AmazonSecrets Component)

The name of the query parameter.

Syntax

__property String QueryParamName[int QueryParamIndex] = { read=FQueryParamName, write=FSetQueryParamName };

Default Value

""

Remarks

The name of the query parameter.

This property specifies the name of the query parameter.

The QueryParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the QueryParamCount property.

This property is not available at design time.

Data Type

String

QueryParamValue Property (AmazonSecrets Component)

The value of the query parameter.

Syntax

__property String QueryParamValue[int QueryParamIndex] = { read=FQueryParamValue, write=FSetQueryParamValue };

Default Value

""

Remarks

The value of the query parameter.

This property specifies the value of the query parameter. The component will automatically URL-encode this value when sending the request.

The QueryParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the QueryParamCount property.

This property is not available at design time.

Data Type

String

Region Property (AmazonSecrets Component)

The region that the component will make requests against.

Syntax

__property String Region = { read=FRegion, write=FSetRegion };

Default Value

"us-east-1"

Remarks

This property controls which region the component will make requests against. By default the component uses us-east-1, the US East (N. Virginia) region. This property should be changed in order to create or access resources in other regions, as secrets are region-specific resources.

Regions:

The component will always convert this property's value to lowercase. If this property is cleared, the component will reset it to the default value.

Data Type

String

SecretData Property (AmazonSecrets Component)

The binary secret data that was retrieved or that should be sent.

Syntax

__property DynamicArray SecretData = { read=FSecretData, write=FSetSecretData };

Remarks

Either this property or the SecretString property is populated with secret data after calling GetSecret, depending on whether the secret data is binary or textual, so long as LocalFile is not set.

This property (or the SecretString property) can also be set before calling CreateSecret or CreateVersion; its data will be sent if LocalFile is not set.

This property and SecretString are mutually exclusive; setting one will clear the other.

This property is not available at design time.

Data Type

Byte Array

SecretKey Property (AmazonSecrets Component)

The secret key to use for authentication.

Syntax

__property String SecretKey = { read=FSecretKey, write=FSetSecretKey };

Default Value

""

Remarks

This property specifies the secret key that should be used for authentication. Both this property and AccessKey must be set before attempting any operations which connect to the server.

Data Type

String

SecretMarker Property (AmazonSecrets Component)

A marker indicating what page of secrets to return next.

Syntax

__property String SecretMarker = { read=FSecretMarker, write=FSetSecretMarker };

Default Value

""

Remarks

This property will be populated when ListSecrets is called if the results are paged and there are more pages. To list all secrets, continue to call ListSecrets until this property returns empty string.

Refer to ListSecrets for more information.

This property is not available at design time.

Data Type

String

SecretCount Property (AmazonSecrets Component)

The number of records in the Secret arrays.

Syntax

__property int SecretCount = { read=FSecretCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• SecretARN
• SecretCreationDate
• SecretDeletionDate
• SecretDescription
• SecretKMSKeyId
• SecretLastAccessDate
• SecretLastChangeDate
• SecretName
• SecretOwningService

The array indices start at 0 and end at SecretCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SecretARN Property (AmazonSecrets Component)

The Amazon resource name (ARN) of the secret.

Syntax

__property String SecretARN[int SecretIndex] = { read=FSecretARN };

Default Value

""

Remarks

The Amazon resource name (ARN) of the secret.

This property reflects the Amazon resource name (ARN) of the secret.

The SecretIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SecretCount property.

This property is read-only and not available at design time.

Data Type

String

SecretCreationDate Property (AmazonSecrets Component)

The creation date of the secret.

Syntax

__property String SecretCreationDate[int SecretIndex] = { read=FSecretCreationDate };

Default Value

""

Remarks

The creation date of the secret.

This property reflects the creation date of the secret, in seconds since the Unix epoch (including fractional seconds).

The SecretIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SecretCount property.

This property is read-only and not available at design time.

Data Type

String

SecretDeletionDate Property (AmazonSecrets Component)

The deletion date of the secret.

Syntax

__property String SecretDeletionDate[int SecretIndex] = { read=FSecretDeletionDate };

Default Value

""

Remarks

The deletion date of the secret.

This property reflects the deletion date of the secret, in seconds since the Unix epoch (including fractional seconds).

The SecretIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SecretCount property.

This property is read-only and not available at design time.

Data Type

String

SecretDescription Property (AmazonSecrets Component)

The secret's description.

Syntax

__property String SecretDescription[int SecretIndex] = { read=FSecretDescription };

Default Value

""

Remarks

The secret's description.

This property reflects the secret's description.

The SecretIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SecretCount property.

This property is read-only and not available at design time.

Data Type

String

SecretKMSKeyId Property (AmazonSecrets Component)

The ARN or alias of the Amazon KMS KMS key used to encrypt the secret.

Syntax

__property String SecretKMSKeyId[int SecretIndex] = { read=FSecretKMSKeyId };

Default Value

""

Remarks

The ARN or alias of the Amazon KMS KMS key used to encrypt the secret.

This property reflects the ARN or alias of the Amazon KMS key used to encrypt the secret.

The SecretIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SecretCount property.

This property is read-only and not available at design time.

Data Type

String

SecretLastAccessDate Property (AmazonSecrets Component)

The last access date of the secret.

Syntax

__property String SecretLastAccessDate[int SecretIndex] = { read=FSecretLastAccessDate };

Default Value

""

Remarks

The last access date of the secret.

This property reflects the last access date of the secret, in seconds since the Unix epoch.

Note that this property offers date-level resolution, time is not included.

The SecretIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SecretCount property.

This property is read-only and not available at design time.

Data Type

String

SecretLastChangeDate Property (AmazonSecrets Component)

The last change date of the secret.

Syntax

__property String SecretLastChangeDate[int SecretIndex] = { read=FSecretLastChangeDate };

Default Value

""

Remarks

The last change date of the secret.

This property reflects the last change date of the secret, in seconds since the Unix epoch (including fractional seconds).

The SecretIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SecretCount property.

This property is read-only and not available at design time.

Data Type

String

SecretName Property (AmazonSecrets Component)

The name of the secret.

Syntax

__property String SecretName[int SecretIndex] = { read=FSecretName };

Default Value

""

Remarks

The name of the secret.

This property reflects the name of the secret.

The SecretIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SecretCount property.

This property is read-only and not available at design time.

Data Type

String

SecretOwningService Property (AmazonSecrets Component)

The name of the service that created the secret.

Syntax

__property String SecretOwningService[int SecretIndex] = { read=FSecretOwningService };

Default Value

""

Remarks

The name of the service that created the secret.

This property reflects the name of the AWS service that created the secret.

The SecretIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SecretCount property.

This property is read-only and not available at design time.

Data Type

String

SecretString Property (AmazonSecrets Component)

The textual secret data that was retrieved or that should be sent.

Syntax

__property String SecretString = { read=FSecretString, write=FSetSecretString };

Default Value

""

Remarks

Either this property or the SecretData property is populated with secret data after calling GetSecret, depending on whether the secret data is binary or textual, so long as LocalFile is not set.

This property (or the SecretData property) can also be set before calling CreateSecret or CreateVersion; its data will be sent if LocalFile is not set.

This property and SecretData are mutually exclusive; setting one will clear the other.

This property is not available at design time.

Data Type

String

SSLAcceptServerCertEffectiveDate Property (AmazonSecrets Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLAcceptServerCertEffectiveDate = { read=FSSLAcceptServerCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExpirationDate Property (AmazonSecrets Component)

The date on which the certificate expires.

Syntax

__property String SSLAcceptServerCertExpirationDate = { read=FSSLAcceptServerCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExtendedKeyUsage Property (AmazonSecrets Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLAcceptServerCertExtendedKeyUsage = { read=FSSLAcceptServerCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprint Property (AmazonSecrets Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprint = { read=FSSLAcceptServerCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA1 Property (AmazonSecrets Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprintSHA1 = { read=FSSLAcceptServerCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA256 Property (AmazonSecrets Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprintSHA256 = { read=FSSLAcceptServerCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLAcceptServerCertIssuer Property (AmazonSecrets Component)

The issuer of the certificate.

Syntax

__property String SSLAcceptServerCertIssuer = { read=FSSLAcceptServerCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKey Property (AmazonSecrets Component)

The private key of the certificate (if available).

Syntax

__property String SSLAcceptServerCertPrivateKey = { read=FSSLAcceptServerCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKeyAvailable Property (AmazonSecrets Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLAcceptServerCertPrivateKeyAvailable = { read=FSSLAcceptServerCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLAcceptServerCertPrivateKeyContainer Property (AmazonSecrets Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLAcceptServerCertPrivateKeyContainer = { read=FSSLAcceptServerCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKey Property (AmazonSecrets Component)

The public key of the certificate.

Syntax

__property String SSLAcceptServerCertPublicKey = { read=FSSLAcceptServerCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyAlgorithm Property (AmazonSecrets Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLAcceptServerCertPublicKeyAlgorithm = { read=FSSLAcceptServerCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyLength Property (AmazonSecrets Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLAcceptServerCertPublicKeyLength = { read=FSSLAcceptServerCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertSerialNumber Property (AmazonSecrets Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLAcceptServerCertSerialNumber = { read=FSSLAcceptServerCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLAcceptServerCertSignatureAlgorithm Property (AmazonSecrets Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLAcceptServerCertSignatureAlgorithm = { read=FSSLAcceptServerCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertStore Property (AmazonSecrets Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLAcceptServerCertStore = { read=FSSLAcceptServerCertStore, write=FSetSSLAcceptServerCertStore };
__property DynamicArray<Byte> SSLAcceptServerCertStoreB = { read=FSSLAcceptServerCertStoreB, write=FSetSSLAcceptServerCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password-protected, specify the password in SSLAcceptServerCertStorePassword.

SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SSLAcceptServerCertStorePassword Property (AmazonSecrets Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLAcceptServerCertStorePassword = { read=FSSLAcceptServerCertStorePassword, write=FSetSSLAcceptServerCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLAcceptServerCertStoreType Property (AmazonSecrets Component)

The type of certificate store for this certificate.

Syntax

__property TckAmazonSecretsSSLAcceptServerCertStoreTypes SSLAcceptServerCertStoreType = { read=FSSLAcceptServerCertStoreType, write=FSetSSLAcceptServerCertStoreType };

enum TckAmazonSecretsSSLAcceptServerCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLAcceptServerCertSubjectAltNames Property (AmazonSecrets Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLAcceptServerCertSubjectAltNames = { read=FSSLAcceptServerCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintMD5 Property (AmazonSecrets Component)

The MD5 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintMD5 = { read=FSSLAcceptServerCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA1 Property (AmazonSecrets Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintSHA1 = { read=FSSLAcceptServerCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA256 Property (AmazonSecrets Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintSHA256 = { read=FSSLAcceptServerCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsage Property (AmazonSecrets Component)

The text description of UsageFlags .

Syntax

__property String SSLAcceptServerCertUsage = { read=FSSLAcceptServerCertUsage };

Default Value

""

Remarks

The text description of SSLAcceptServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsageFlags Property (AmazonSecrets Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLAcceptServerCertUsageFlags = { read=FSSLAcceptServerCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:

Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertVersion Property (AmazonSecrets Component)

The certificate's version number.

Syntax

__property String SSLAcceptServerCertVersion = { read=FSSLAcceptServerCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLAcceptServerCertSubject Property (AmazonSecrets Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLAcceptServerCertSubject = { read=FSSLAcceptServerCertSubject, write=FSetSSLAcceptServerCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLAcceptServerCertEncoded Property (AmazonSecrets Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLAcceptServerCertEncoded = { read=FSSLAcceptServerCertEncoded, write=FSetSSLAcceptServerCertEncoded };
__property DynamicArray<Byte> SSLAcceptServerCertEncodedB = { read=FSSLAcceptServerCertEncodedB, write=FSetSSLAcceptServerCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertEffectiveDate Property (AmazonSecrets Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLCertEffectiveDate = { read=FSSLCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLCertExpirationDate Property (AmazonSecrets Component)

The date on which the certificate expires.

Syntax

__property String SSLCertExpirationDate = { read=FSSLCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLCertExtendedKeyUsage Property (AmazonSecrets Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLCertExtendedKeyUsage = { read=FSSLCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLCertFingerprint Property (AmazonSecrets Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprint = { read=FSSLCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLCertFingerprintSHA1 Property (AmazonSecrets Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprintSHA1 = { read=FSSLCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLCertFingerprintSHA256 Property (AmazonSecrets Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprintSHA256 = { read=FSSLCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLCertIssuer Property (AmazonSecrets Component)

The issuer of the certificate.

Syntax

__property String SSLCertIssuer = { read=FSSLCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLCertPrivateKey Property (AmazonSecrets Component)

The private key of the certificate (if available).

Syntax

__property String SSLCertPrivateKey = { read=FSSLCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLCertPrivateKeyAvailable Property (AmazonSecrets Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLCertPrivateKeyAvailable = { read=FSSLCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLCertPrivateKeyContainer Property (AmazonSecrets Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLCertPrivateKeyContainer = { read=FSSLCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLCertPublicKey Property (AmazonSecrets Component)

The public key of the certificate.

Syntax

__property String SSLCertPublicKey = { read=FSSLCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLCertPublicKeyAlgorithm Property (AmazonSecrets Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLCertPublicKeyAlgorithm = { read=FSSLCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertPublicKeyLength Property (AmazonSecrets Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLCertPublicKeyLength = { read=FSSLCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLCertSerialNumber Property (AmazonSecrets Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLCertSerialNumber = { read=FSSLCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLCertSignatureAlgorithm Property (AmazonSecrets Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLCertSignatureAlgorithm = { read=FSSLCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertStore Property (AmazonSecrets Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore };
__property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password-protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SSLCertStorePassword Property (AmazonSecrets Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (AmazonSecrets Component)

The type of certificate store for this certificate.

Syntax

__property TckAmazonSecretsSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };

enum TckAmazonSecretsSSLCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubjectAltNames Property (AmazonSecrets Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLCertSubjectAltNames = { read=FSSLCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLCertThumbprintMD5 Property (AmazonSecrets Component)

The MD5 hash of the certificate.

Syntax

__property String SSLCertThumbprintMD5 = { read=FSSLCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA1 Property (AmazonSecrets Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLCertThumbprintSHA1 = { read=FSSLCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA256 Property (AmazonSecrets Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLCertThumbprintSHA256 = { read=FSSLCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertUsage Property (AmazonSecrets Component)

The text description of UsageFlags .

Syntax

__property String SSLCertUsage = { read=FSSLCertUsage };

Default Value

""

Remarks

The text description of SSLCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLCertUsageFlags Property (AmazonSecrets Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLCertUsageFlags = { read=FSSLCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:

Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLCertVersion Property (AmazonSecrets Component)

The certificate's version number.

Syntax

__property String SSLCertVersion = { read=FSSLCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLCertSubject Property (AmazonSecrets Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLCertEncoded Property (AmazonSecrets Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded };
__property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLProvider Property (AmazonSecrets Component)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

__property TckAmazonSecretsSSLProviders SSLProvider = { read=FSSLProvider, write=FSetSSLProvider };

enum TckAmazonSecretsSSLProviders {
  sslpAutomatic=0,
  sslpPlatform=1,
  sslpInternal=2
};

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

Data Type

Integer

SSLServerCertEffectiveDate Property (AmazonSecrets Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLServerCertEffectiveDate = { read=FSSLServerCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExpirationDate Property (AmazonSecrets Component)

The date on which the certificate expires.

Syntax

__property String SSLServerCertExpirationDate = { read=FSSLServerCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExtendedKeyUsage Property (AmazonSecrets Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLServerCertExtendedKeyUsage = { read=FSSLServerCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLServerCertFingerprint Property (AmazonSecrets Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprint = { read=FSSLServerCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA1 Property (AmazonSecrets Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprintSHA1 = { read=FSSLServerCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA256 Property (AmazonSecrets Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprintSHA256 = { read=FSSLServerCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLServerCertIssuer Property (AmazonSecrets Component)

The issuer of the certificate.

Syntax

__property String SSLServerCertIssuer = { read=FSSLServerCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLServerCertPrivateKey Property (AmazonSecrets Component)

The private key of the certificate (if available).

Syntax

__property String SSLServerCertPrivateKey = { read=FSSLServerCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLServerCertPrivateKeyAvailable Property (AmazonSecrets Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLServerCertPrivateKeyAvailable = { read=FSSLServerCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLServerCertPrivateKeyContainer Property (AmazonSecrets Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLServerCertPrivateKeyContainer = { read=FSSLServerCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLServerCertPublicKey Property (AmazonSecrets Component)

The public key of the certificate.

Syntax

__property String SSLServerCertPublicKey = { read=FSSLServerCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyAlgorithm Property (AmazonSecrets Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLServerCertPublicKeyAlgorithm = { read=FSSLServerCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyLength Property (AmazonSecrets Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLServerCertPublicKeyLength = { read=FSSLServerCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLServerCertSerialNumber Property (AmazonSecrets Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLServerCertSerialNumber = { read=FSSLServerCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLServerCertSignatureAlgorithm Property (AmazonSecrets Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLServerCertSignatureAlgorithm = { read=FSSLServerCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertStore Property (AmazonSecrets Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLServerCertStore = { read=FSSLServerCertStore };
__property DynamicArray<Byte> SSLServerCertStoreB = { read=FSSLServerCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password-protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

This property is read-only.

Data Type

Byte Array

SSLServerCertStorePassword Property (AmazonSecrets Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLServerCertStorePassword = { read=FSSLServerCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

SSLServerCertStoreType Property (AmazonSecrets Component)

The type of certificate store for this certificate.

Syntax

__property TckAmazonSecretsSSLServerCertStoreTypes SSLServerCertStoreType = { read=FSSLServerCertStoreType };

enum TckAmazonSecretsSSLServerCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

Integer

SSLServerCertSubjectAltNames Property (AmazonSecrets Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLServerCertSubjectAltNames = { read=FSSLServerCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLServerCertThumbprintMD5 Property (AmazonSecrets Component)

The MD5 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintMD5 = { read=FSSLServerCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA1 Property (AmazonSecrets Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintSHA1 = { read=FSSLServerCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA256 Property (AmazonSecrets Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintSHA256 = { read=FSSLServerCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertUsage Property (AmazonSecrets Component)

The text description of UsageFlags .

Syntax

__property String SSLServerCertUsage = { read=FSSLServerCertUsage };

Default Value

""

Remarks

The text description of SSLServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLServerCertUsageFlags Property (AmazonSecrets Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLServerCertUsageFlags = { read=FSSLServerCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:

Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLServerCertVersion Property (AmazonSecrets Component)

The certificate's version number.

Syntax

__property String SSLServerCertVersion = { read=FSSLServerCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLServerCertSubject Property (AmazonSecrets Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLServerCertSubject = { read=FSSLServerCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

SSLServerCertEncoded Property (AmazonSecrets Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLServerCertEncoded = { read=FSSLServerCertEncoded };
__property DynamicArray<Byte> SSLServerCertEncodedB = { read=FSSLServerCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Byte Array

Timeout Property (AmazonSecrets Component)

The timeout for the component.

Syntax

__property int Timeout = { read=FTimeout, write=FSetTimeout };

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the component will wait for the operation to complete before returning control.

The component will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the component raises an exception.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

VersionMarker Property (AmazonSecrets Component)

A marker indicating what page of secret versions to return next.

Syntax

__property String VersionMarker = { read=FVersionMarker, write=FSetVersionMarker };

Default Value

""

Remarks

This property will be populated when ListVersions is called if the results are paged and there are more pages. To list all secret versions, continue to call ListVersions until this property returns empty string.

Refer to ListVersions for more information.

This property is not available at design time.

Data Type

String

VersionCount Property (AmazonSecrets Component)

The number of records in the Version arrays.

Syntax

__property int VersionCount = { read=FVersionCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• VersionCreationDate
• VersionLastAccessDate
• VersionSecretARN
• VersionSecretName
• VersionStagingLabels
• VersionVersionId

The array indices start at 0 and end at VersionCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

VersionCreationDate Property (AmazonSecrets Component)

The creation date of the secret version.

Syntax

__property String VersionCreationDate[int VersionIndex] = { read=FVersionCreationDate };

Default Value

""

Remarks

The creation date of the secret version.

This property reflects the creation date of the secret version, in seconds since the Unix epoch (including fractional seconds).

The VersionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the VersionCount property.

This property is read-only and not available at design time.

Data Type

String

VersionLastAccessDate Property (AmazonSecrets Component)

The last access date of the secret version.

Syntax

__property String VersionLastAccessDate[int VersionIndex] = { read=FVersionLastAccessDate };

Default Value

""

Remarks

The last access date of the secret version.

This property reflects the last access date of the secret version, in seconds since the Unix epoch.

Note that this property offers date-level resolution, time is not included.

The VersionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the VersionCount property.

This property is read-only and not available at design time.

Data Type

String

VersionSecretARN Property (AmazonSecrets Component)

The Amazon resource name (ARN) of the secret this is a version of.

Syntax

__property String VersionSecretARN[int VersionIndex] = { read=FVersionSecretARN };

Default Value

""

Remarks

The Amazon resource name (ARN) of the secret this is a version of.

This property reflects the Amazon resource name (ARN) of the secret that this is a version of.

The VersionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the VersionCount property.

This property is read-only and not available at design time.

Data Type

String

VersionSecretName Property (AmazonSecrets Component)

The name of the secret that this is a version of.

Syntax

__property String VersionSecretName[int VersionIndex] = { read=FVersionSecretName };

Default Value

""

Remarks

The name of the secret that this is a version of.

This property reflects the name of the secret that this is a version of.

The VersionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the VersionCount property.

This property is read-only and not available at design time.

Data Type

String

VersionStagingLabels Property (AmazonSecrets Component)

The staging labels attached to the secret version.

Syntax

__property String VersionStagingLabels[int VersionIndex] = { read=FVersionStagingLabels };

Default Value

""

Remarks

The staging labels attached to the secret version.

This property reflects a comma-separated list of staging labels attached to the secret version.

Each secret version can have up to 20 staging labels attached to it at once, and a particular staging label can only be attached to one secret version at any given time.

The VersionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the VersionCount property.

This property is read-only and not available at design time.

Data Type

String

VersionVersionId Property (AmazonSecrets Component)

The Id of the secret version.

Syntax

__property String VersionVersionId[int VersionIndex] = { read=FVersionVersionId };

Default Value

""

Remarks

The Id of the secret version.

This property reflects the Id of the secret version.

The VersionIndex parameter specifies the index of the item in the array. The size of the array is controlled by the VersionCount property.

This property is read-only and not available at design time.

Data Type

String

AddQueryParam Method (AmazonSecrets Component)

Adds a query parameter to the QueryParams properties.

Syntax

void __fastcall AddQueryParam(String Name, String Value);

Remarks

This method is used to add a query parameter to the QueryParams properties. Name specifies the name of the parameter, and Value specifies the value of the parameter.

All specified Values will be URL encoded by the component automatically. Consult the service documentation for details on the available parameters.

CancelDeletion Method (AmazonSecrets Component)

Cancels the deletion of a secret.

Syntax

void __fastcall CancelDeletion(String SecretId);

Remarks

This method cancels the deletion of the secret specified by SecretId. Refer to the DeleteSecret method's documentation for more information.

The value passed for SecretId must the ARN or name of a secret in the current account and Region.

Config Method (AmazonSecrets Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateSecret Method (AmazonSecrets Component)

Creates a new secret.

Syntax

String __fastcall CreateSecret(String SecretName, String Description);

Remarks

This method creates a new secret with the given SecretName. The secret data is taken from the specified LocalFile or the SecretData or SecretString property; it may be up to 65536 bytes in length. The Id of the initial secret version is returned.

The value passed for SecretName may be up to 512 characters long, and must consist solely of ASCII letters, digits, and the following characters: /_+=.@-.

The Description parameter is optional; it can be any string up to 2048 characters long.

If desired, the KMSKeyId configuration setting can be set before calling this method to specify the Amazon KMS CMK (customer master key) to use to encrypt the secret (by default, an AWS-managed one is used).

CreateVersion Method (AmazonSecrets Component)

Creates a new secret version.

Syntax

String __fastcall CreateVersion(String SecretId, String StagingLabels);

Remarks

This method creates a new version of the secret specified by SecretId. The secret data is taken from the specified LocalFile or the SecretData or SecretString property; it may be up to 65536 bytes in length. The Id of the newly-created secret version is returned.

The value passed for SecretId must the ARN or name of a secret in the current account and Region.

The value passed for StagingLabels must be a comma-separated list of staging labels to attach to the new version; up to 20 staging labels can be attached to a secret version. If empty string is passed, AWSCURRENT is assumed. The server may do the following things depending on which staging labels are specified:

• If any of the specified staging labels are currently attached to other versions of this secret, they are moved from those versions to the new one.
• If the AWSCURRENT staging label is attached to the new version, the server will automatically move the AWSPREVIOUS staging label to the version that AWSCURRENT was previously attached to.

DeleteSecret Method (AmazonSecrets Component)

Deletes a secret and all of its versions.

Syntax

void __fastcall DeleteSecret(String SecretId, int DaysToWait);

Remarks

This method deletes the secret specified by SecretId, and all of its versions, either immediately or after a waiting period depending on the value passed for DaysToWait.

The value passed for SecretId must the ARN or name of a secret in the current account and Region.

If 0 is passed for DaysToWait, the secret is deleted immediately. Otherwise, DaysToWait must be a value in the range 7 to 30 (inclusive), which will cause the secret to be scheduled for deletion. During the waiting period:

• The secret's data cannot be retrieved from any secret version.
• The deletion can be canceled by calling the CancelDeletion method.

DoEvents Method (AmazonSecrets Component)

This method processes events from the internal message queue.

Syntax

void __fastcall DoEvents();

Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns.

GenRandomPassword Method (AmazonSecrets Component)

Returns a server-generated random password that complies with the given criteria.

Syntax

String __fastcall GenRandomPassword(int Length, bool Lowercase, bool Uppercase, bool Numbers, bool Punctuation, bool Spaces, String ExcludeChars, bool RequireEach);

Remarks

This method requests and returns a random password generated by the server based on a number of criteria.

The Length parameter specifies how long the password must be; it must be a value in the range 1 to 4096 (inclusive).

The Lowercase, Uppercase, Numbers, Punctuation, and Spaces parameters specify whether the server is allowed to include characters of each type. The Lowercase and Uppercase types cover ASCII characters only. For Punctuation, the applicable characters are: ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~

The ExcludeChars parameters specifies a list of characters that must not be included in the password. For example, passing &" - would exclude ampersands, double quotes, spaces, and hyphens.

The RequireEach parameter specifies whether the server must include at least one of each allowed character type in the password.

GetSecret Method (AmazonSecrets Component)

Retrieves a secret version's data.

Syntax

void __fastcall GetSecret(String SecretId, String VersionId, String StagingLabel);

Remarks

This method retrieves the secret data held by a version of the secret specified by SecretId. The exact version whose data should be retrieved is specified by either VersionId or StagingLabel (if both are specified, the latter is ignored). If neither are specified, the data from the secret version with the AWSCURRENT staging label is retrieved.

The value passed for SecretId must the ARN or name of a secret in the current account and Region.

The secret data is returned via the specified LocalFile or the SecretData or SecretString property.

GetSecretInfo Method (AmazonSecrets Component)

Gets information about a secret.

Syntax

void __fastcall GetSecretInfo(String SecretId);

Remarks

This method gets information about the secret specified by SecretId.

When the information is returned, the component clears the Secrets properties and repopulates it properties (however, not all properties are populated). The SecretList and VersionList events are also fired.

ListSecrets Method (AmazonSecrets Component)

Lists secrets in the current account and region.

Syntax

void __fastcall ListSecrets();

Remarks

This method lists the secrets in the current account and Region. Note that, by default, secrets that have been scheduled for deletion are not included in the results; the IncludeDeleted configuration setting can be used to control this behavior.

Calling this method will fire the SecretList event once for each secret, and will also populate the Secrets properties. If the AlwaysParseVersions configuration setting is enabled, each secret's basic version information will also be parsed and used to populate the Versions properties and fire the VersionList event.

If there are still more secrets available to list when this method returns, the SecretMarker property will be populated. Continue to call this method until SecretMarker is empty to accumulate all pages of results in the Secrets properties.

The MaxSecrets configuration setting can be used to control the maximum number of results to return at once.

ListVersions Method (AmazonSecrets Component)

List the secret versions for the specified secret.

Syntax

void __fastcall ListVersions(String SecretId);

Remarks

This method lists the secret versions for the secret specified by SecretId. Note that by default, only non-deprecated versions are returned (i.e., those with at least one staging label attached to them); the IncludeDeprecated configuration setting can be used to control this behavior.

Calling this method will fire the VersionList event once for each secret version, and will also populate the Versions properties.

If there are still more secret versions available to list when this method returns, the VersionMarker property will be populated. Continue to call this method until VersionMarker is empty to accumulate all pages of results in the Versions properties.

The MaxSecrets configuration setting can be used to control the maximum number of results to return at once.

MoveStagingLabel Method (AmazonSecrets Component)

Adds, removes, or moves a staging label.

Syntax

void __fastcall MoveStagingLabel(String SecretId, String StagingLabel, String FromVersionId, String ToVersionId);

Remarks

This method adds, removes, or moves a staging label between versions of the secret specified by SecretId.

The value passed for SecretId must the ARN or name of a secret in the current account and Region.

The StagingLabel parameter specifies the staging label that should be added, removed, or moved. If the staging label is AWSCURRENT, it cannot be removed, only moved, and the server will automatically move the AWSPREVIOUS staging label to the secret version specified by FromVersionId.

The FromVersionId and ToVersionId parameters specify which version(s) to operate against. When adding a new staging label to a secret version, only ToVersionId must be specified. When removing a staging label from a version, only FromVersionId must be specified. When moving an existing staging label from one version to another, both FromVersionId and ToVersionId must be specified.

Reset Method (AmazonSecrets Component)

Resets the component to its initial state.

Syntax

void __fastcall Reset();

Remarks

This method resets the component to its initial state.

SendCustomRequest Method (AmazonSecrets Component)

Sends a custom request to the server.

Syntax

void __fastcall SendCustomRequest(String Action, String Body);

Remarks

This method can be used to send arbitrary requests to the server. The value passed for the Action parameter must be one of the actions described in the Amazon Secrets Manager documentation.

When this method is called, the component does the following:

1. Builds a request URL, including query parameters, based on the following:
   • Region
   • QueryParams
2. Adds request headers from OtherHeaders.
3. Adds the specified request Body, if non-empty.
4. Signs the request.
5. Sends the request to the server.
6. Stores the response headers in the ParsedHeaders properties; and the response body in the specified LocalFile or SecretData.

If the response body is JSON data, the XPath, XText, and other X* configuration settings can then be used to navigate and extract information from it.

UpdateSecret Method (AmazonSecrets Component)

Updates a secret's information.

Syntax

void __fastcall UpdateSecret(String SecretId, String Description);

Remarks

This method updates the information of the secret specified by SecretId.

The value passed for SecretId must the ARN or name of a secret in the current account and Region.

The Description parameter specifies the secret's new description (which may be empty).

The KMSKeyId configuration setting can also be set before calling this method to change the AWS KMS key used to encrypt the secret. However, if the KMS key used to encrypt a secret is changed, it is important that the secret's data be updated at least once using CreateVersion. When a new version is created, the server decrypts the secret using the old KMS key and re-encrypts it using the new one. If the old KMS key is deleted or disabled before this occurs, the server will no longer be able to decrypt the secret, effectively causing its data to be lost.

EndTransfer Event (AmazonSecrets Component)

This event fires when a document finishes transferring.

Syntax

typedef struct {
  int Direction;
} TckAmazonSecretsEndTransferEventParams;
typedef void __fastcall (__closure *TckAmazonSecretsEndTransferEvent)(System::TObject* Sender, TckAmazonSecretsEndTransferEventParams *e);
__property TckAmazonSecretsEndTransferEvent OnEndTransfer = { read=FOnEndTransfer, write=FOnEndTransfer };

Remarks

The EndTransfer event is fired when the document text finishes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (AmazonSecrets Component)

Fired when information is available about errors during data delivery.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TckAmazonSecretsErrorEventParams;
typedef void __fastcall (__closure *TckAmazonSecretsErrorEvent)(System::TObject* Sender, TckAmazonSecretsErrorEventParams *e);
__property TckAmazonSecretsErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Header Event (AmazonSecrets Component)

Fired every time a header line comes in.

Syntax

typedef struct {
  String Field;
  String Value;
} TckAmazonSecretsHeaderEventParams;
typedef void __fastcall (__closure *TckAmazonSecretsHeaderEvent)(System::TObject* Sender, TckAmazonSecretsHeaderEventParams *e);
__property TckAmazonSecretsHeaderEvent OnHeader = { read=FOnHeader, write=FOnHeader };

Remarks

The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

Log Event (AmazonSecrets Component)

Fired once for each log message.

Syntax

typedef struct {
  int LogLevel;
  String Message;
  String LogType;
} TckAmazonSecretsLogEventParams;
typedef void __fastcall (__closure *TckAmazonSecretsLogEvent)(System::TObject* Sender, TckAmazonSecretsLogEventParams *e);
__property TckAmazonSecretsLogEvent OnLog = { read=FOnLog, write=FOnLog };

Remarks

This event is fired once for each log message generated by the component. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of message. Possible values are as follows:

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

Message is the log entry.

LogType identifies the type of log entry. Possible values are as follows:

• "Info"
• "RequestHeaders"
• "ResponseHeaders"
• "RequestBody"
• "ResponseBody"
• "ProxyRequest"
• "ProxyResponse"
• "FirewallRequest"
• "FirewallResponse"

SecretList Event (AmazonSecrets Component)

Fires once for each secret when listing secrets.

Syntax

typedef struct {
  String ARN;
  String Name;
  String Description;
  String CreationDate;
  String DeletionDate;
  String LastAccessDate;
  String LastChangeDate;
} TckAmazonSecretsSecretListEventParams;
typedef void __fastcall (__closure *TckAmazonSecretsSecretListEvent)(System::TObject* Sender, TckAmazonSecretsSecretListEventParams *e);
__property TckAmazonSecretsSecretListEvent OnSecretList = { read=FOnSecretList, write=FOnSecretList };

Remarks

This event fires once for each secret returned when ListSecrets or GetSecretInfo is called.

ARN reflects the Amazon resource name of the secret.

Name reflects the name of the secret.

Description reflects the secret's description.

CreationDate reflects the secret's creation date, in seconds since the Unix epoch (including fractional seconds).

DeletionDate reflects the secret's scheduled deletion date, if applicable, in seconds since the Unix epoch (including fractional seconds).

LastAccessDate reflects the secret's last access date, in seconds since the Unix epoch. It provides date-level resolution only, the time is not included.

LastChangeDate reflects the secret's last change date, in seconds since the Unix epoch (including fractional seconds).

SSLServerAuthentication Event (AmazonSecrets Component)

Fired after the server presents its certificate to the client.

Syntax

typedef struct {
  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;
  String CertSubject;
  String CertIssuer;
  String Status;
  bool Accept;
} TckAmazonSecretsSSLServerAuthenticationEventParams;
typedef void __fastcall (__closure *TckAmazonSecretsSSLServerAuthenticationEvent)(System::TObject* Sender, TckAmazonSecretsSSLServerAuthenticationEventParams *e);
__property TckAmazonSecretsSSLServerAuthenticationEvent OnSSLServerAuthentication = { read=FOnSSLServerAuthentication, write=FOnSSLServerAuthentication };

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (AmazonSecrets Component)

Fired when secure connection progress messages are available.

Syntax

typedef struct {
  String Message;
} TckAmazonSecretsSSLStatusEventParams;
typedef void __fastcall (__closure *TckAmazonSecretsSSLStatusEvent)(System::TObject* Sender, TckAmazonSecretsSSLStatusEventParams *e);
__property TckAmazonSecretsSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (AmazonSecrets Component)

This event fires when a document starts transferring (after the headers).

Syntax

typedef struct {
  int Direction;
} TckAmazonSecretsStartTransferEventParams;
typedef void __fastcall (__closure *TckAmazonSecretsStartTransferEvent)(System::TObject* Sender, TckAmazonSecretsStartTransferEventParams *e);
__property TckAmazonSecretsStartTransferEvent OnStartTransfer = { read=FOnStartTransfer, write=FOnStartTransfer };

Remarks

The StartTransfer event is fired when the document text starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Transfer Event (AmazonSecrets Component)

Fired while a document transfers (delivers document).

Syntax

typedef struct {
  int Direction;
  __int64 BytesTransferred;
  int PercentDone;
  String Text;
  DynamicArray<Byte> TextB;
} TckAmazonSecretsTransferEventParams;
typedef void __fastcall (__closure *TckAmazonSecretsTransferEvent)(System::TObject* Sender, TckAmazonSecretsTransferEventParams *e);
__property TckAmazonSecretsTransferEvent OnTransfer = { read=FOnTransfer, write=FOnTransfer };

Remarks

The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.

The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

VersionList Event (AmazonSecrets Component)

Fires once for each secret version when listing secret versions.

Syntax

typedef struct {
  String SecretARN;
  String SecretName;
  String VersionId;
  String StagingLabels;
  String CreationDate;
  String LastAccessDate;
} TckAmazonSecretsVersionListEventParams;
typedef void __fastcall (__closure *TckAmazonSecretsVersionListEvent)(System::TObject* Sender, TckAmazonSecretsVersionListEventParams *e);
__property TckAmazonSecretsVersionListEvent OnVersionList = { read=FOnVersionList, write=FOnVersionList };

Remarks

This event fires once for each secret version returned when ListVersions, GetSecretInfo, or (if the AlwaysParseVersions configuration setting is enabled) ListSecrets is called. Note that CreationDate and LastAccessDate are only populated when ListVersions is called.

SecretARN reflects the Amazon resource name of the secret this is a version of.

SecretName reflects the name of the secret this is a version of.

VersionId reflects the Id of the secret version.

StagingLabels reflects a comma-separated list of staging labels attached to the secret version.

CreationDate reflects the secret version's creation date, in seconds since the Unix epoch (including fractional seconds).

LastAccessDate reflects the secret version's last access date, in seconds since the Unix epoch. It provides date-level resolution only, the time is not included.

Config Settings (AmazonSecrets Component)

AmazonSecrets Config Settings

<firstlevel>
  <one>value</one>
  <two>
    <item>first</item>
    <item>second</item>
  </two>
  <three>value three</three>
</firstlevel>

{
  "firstlevel": {
    "one": "value",
    "two": ["first", "second"],
    "three": "value three"
  }
}

HTTP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

Trappable Errors (AmazonSecrets Component)

Common Errors

The component may also return one of the following error codes, which are inherited from other components.

HTTP Errors

The component may also return one of the following error codes, which are inherited from other components.

TCPClient Errors

SSL Errors

TCP/IP Errors