OAuth Control
Properties Methods Events Config Settings Errors
The OAuth control is used to authorize a client and provide an authorization string used in future requests.
Syntax
OAuth
Remarks
The OAuth control supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL-related settings are also supported through the Config method.
The OAuth control provides an easy way to obtain an authorization string for future requests to a service. The control implements an OAuth 2.0 client.
To begin using the control, first register your application with the service you want to use. During this process, obtain a ClientId and ClientSecret as well as the ServerAuthURL and ServerTokenURL for the authorization server. Then set ClientProfile to the client profile that best describes your situation and call GetAuthorization.
The following client profiles are currently supported by the control:
- Application (desktop application)
- Web (server-side application, such as a website)
- Device (an application without browser access, such as a game console)
- Mobile (phone or tablet application)
- JWT (server-to-server authentication using a JWT Bearer Token, such as Google service account authentication)
Application Profile
The Application profile is applicable to applications that are run directly by the user. For instance, a Windows form application would use the Application profile. To authorize your application (client) using the Application profile, use the following steps:
First, set ClientProfile to ocpApplication. This defines the profile the control will use. Set the ClientId, ClientSecret, ServerAuthURL, and ServerTokenURL to the values you obtained when registering your application.
Second, call GetAuthorization to begin the authorization process. When GetAuthorization is called, the control will build the URL to which the user will be directed and fire the LaunchBrowser event. The control will then launch the browser using the command and URL shown in the LaunchBrowser event and await the response. The duration for which the control will wait for a response is defined by BrowserResponseTimeout.
Third, the user will interact with the browser to authenticate and grant access to the connecting application. The user will then be redirected back to an embedded web server that was automatically started when GetAuthorization was called. At this time, the ReturnURL event will fire. This event provides an opportunity to provide a custom response to your user that they will see in their browser.
Fourth, the control will then automatically exchange the grant that was returned by the authorization server for the access token using the HTTP endpoint specified in ServerTokenURL.
The authorization is now complete and the GetAuthorization method will return the authorization string. The authorization string can then be used with any of our components by simply setting the returned value to the authorization property before making a request.
The following is a simple example:
component.ClientId = "CLIENT_ID";
component.ClientSecret = "CLIENT_ID";
component.ServerAuthURL = "https://accounts.google.com/o/oauth2/auth";
component.ServerTokenURL = "https://accounts.google.com/o/oauth2/token";
HTTP.Authorization = component.GetAuthorization();
HTTP.Get("https://www.googleapis.com/oauth2/v1/userinfo");
Web Profile
The Web profile is applicable to applications that are run on the server side when the user uses the application from a web browser. To authorize your application (client) using this profile, use the following steps:
First, set ClientProfile to ocpWeb. This defines the profile the component will use. Set the ClientId, ClientSecret, ServerAuthURL, and ServerTokenURL to the values you obtained when registering your application. Set ReturnURL to the page on your site that will be the endpoint the user is redirected back to after authentication.
Second, call GetAuthorizationURL. This will return a URL to which the user should be redirected. Redirect the user to this URL.
Third, after the user authenticates and is returned to the page on your site specified by ReturnURL, parse the "code" query string parameter from the incoming request to get the authorization code from the authorization server. Then, set AuthorizationCode property to the parsed value.
Fourth, after AuthorizationCode is set, call GetAuthorization to exchange the code specified in AuthorizationCode for a token from the server specified by ServerTokenURL. GetAuthorization will then return the authorization string. The authorization string can be used with any of our components by simply setting the returned value to the authorization property before making a request.
Device Profile
The Device profile is applicable to applications that are run on devices for which a web browser cannot be used. For example, a game console would use the Device profile. To authorize your application (client) using the device client profile use the following steps:
First, set ClientProfile to ocpDevice. This defines the profile the control will use. Set the ClientId, ClientSecret, ServerAuthURL, and ServerTokenURL to the values you obtained when registering your application. Do not set ReturnURL.
Second, call GetAuthorizationURL. The control will automatically make a request to ServerAuthURL to obtain a user code for the device. The GetAuthorizationURL method will return the URL your user must visit from another device or computer that has web browser support. The GetAuthorizationURL method will also populate DeviceUserCode. This device user code must be provided to the user. The user will enter the code at the URL returned by GetAuthorizationURL.
Third, at this time, call GetAuthorization. The control will begin polling the server specified in ServerTokenURL. The polling interval is specified (in seconds) by the PollingInterval setting.
Fourth, after the user has authenticated, the GetAuthorization method will return the authorization string. To use the authorization string with any of our components, simply pass this value to the authorization property before making the request.
Mobile Profile
The Mobile profile is applicable to applications that are run on devices for which a web browser can be used. For instance, a mobile phone or tablet would use the Mobile profile. The behavior when using this profile is very similar to the Application profile. The only difference between the Mobile and Application profiles is the way the browser is launched. When set to the Mobile profile, the LaunchBrowser event will fire but the control will not attempt to launch the browser automatically. The browser must be launched manually from code. This behavior is the only difference between the Mobile and Application profiles. Please read the steps for the Application profile for a more detailed look at the process.
JWT Bearer Token (Server-to-Server) Profile
The JWT (JSON Web Token) Bearer Token profile is available for server-to-server authentication. For instance this may be used by web applications to access a Google service. In this case, the application will access data on behalf of the service account, not the end user. End-user interaction is not required.
First, specify AuthorizationScope ServerTokenURL and JWTServiceProvider.
Second, specify JWT-specific values. The use of the JWT profile also requires additional configuration settings to be specified, including a certificate with private key used to sign the JWT. Either specify the JWTJSONKey configuration setting, which will parse the necessary information automatically, or manually specify the following configuration settings:
- JWTIssuer (required)
- JWTAudience (required)
- JWTCertStoreType (required)
- JWTCertStore (required)
- JWTCertStorePassword (required)
- JWTCertSubject (required)
- JWTSubject
- JWTValidityTime
- JWTSignatureAlgorithm
Example 1. Google:
oauth.AuthorizationScope = "https://www.googleapis.com/auth/analytics";
oauth.ServerTokenURL = "https://www.googleapis.com/oauth2/v3/token";
oauth.ClientProfile = OauthClientProfiles.ocpJWT;
oauth.Config("JWTServiceProvider=0");
oauth.Config("JWTIssuer=CLIENT_ID");
oauth.Config("JWTAudience=https://www.googleapis.com/oauth2/v3/token");
oauth.Config("JWTCertStoreType=2");
oauth.Config("JWTCertStore=C:\\MyCertificate.p12");
oauth.Config("JWTCertStorePassword=password");
oauth.Config("JWTCertSubject=*");
oauth.Config("JWTValidityTime=5400"); //in seconds
string authStr = oauth.GetAuthorization();
Example 2. Microsoft:
oauth.ClientId = "Client_Id";
oauth.ClientProfile = OauthClientProfiles.ocpJWT;
oauth.AuthorizationScope = "https://graph.microsoft.com/.default";
oauth.ServerTokenURL = "https://login.microsoftonline.com/" + tenant_id + "/oauth2/V2.0/token";
oauth.Config("JWTServiceProvider=1");
oauth.Config("JWTIssuer=" + CLIENT_ID);
oauth.Config("JWTSubject=" + CLIENT_ID);
oauth.Config("JWTCertStoreType=2");
oauth.Config("JWTCertStore=C:\\MyCertificate.p12");
oauth.Config("JWTCertStorePassword=password");
oauth.Config("JWTCertSubject=*");
oauth.Config("JWTValidityTime=3600");
oauth.Config("JWTAudience=https://login.microsoftonline.com/"+ tenant_id + "/oauth2/V2.0/token");
string authStr = oauth.GetAuthorization();
Custom Responses
When using a profile that makes use of the embedded web server, the response that is displayed to the user on success of failure may be customized to include a variety of product- and company-specific information. The following section is applicable only when the embedded web server is used, for instance, when ClientProfile is set to ocpApplication.
By default, the control will display a formatted result message indicating whether the authorization succeeded or failed. The following optional settings control the text of the message as well as product images, company logos, and links for help or licensing terms that can be displayed to the user.
Configuration Setting | Description |
ResponseSuccessHeading | Short header text indicating success. The default value is Authorization Successful |
ResponseSuccessMessage | A description for a successful authorization. The default value is Access to your account was successfully authorized. You may now close this window. |
ResponseFailureHeading | Short header text indicating failure. The default value is Authorization Failed |
ResponseFailureMessage | A description for a failed authorization. The default value is Access to your account could not be authorized. Please check your user and connection details and try again. |
ResponseHelpURL | A URL to a help page or other resource. If set, a Help link will be displayed and point to this URL. |
ResponseLicenseURL | A URL to licensing terms. If set, a License link will be displayed and point to this URL. |
ResponseProductURL | A URL to a product page or similar resource. This is used in conjunction with ResponseProductImage. |
ResponseProductImage | A URL or full path to a product image. If set, the image will be displayed and will be a hyperlink to ResponseProductURL. |
ResponseCompanyURL | A URL to the company website or similar resource. This is used in conjunction with ResponseCompanyImage. |
ResponseCompanyImage | A URL or full path to a company logo. If set, the image will be displayed and will be a hyperlink to ResponseCompanyURL. |
Alternatively, for complete control, set the WebServerResponse and WebServerFailedResponse settings to the full HTML to be displayed to the user.
Property List
The following is the full list of the properties of the control with short descriptions. Click on the links for further details.
AccessToken | The access token returned by the authorization server. |
AccessTokenExp | The lifetime of the access token. |
AuthorizationCode | The authorization code that is exchanged for an access token. |
AuthorizationScope | The scope request or response parameter used during authorization. |
ClientId | The Id of the client assigned when registering the application. |
ClientProfile | The type of client that is requesting authorization. |
ClientSecret | The secret value for the client assigned when registering the application. |
Connected | This property shows whether the control is connected. |
CookieCount | The number of records in the Cookie arrays. |
CookieDomain | This is the domain of a received cookie. |
CookieExpiration | This property contains an expiration time for the cookie (if provided by the server). |
CookieName | This property, contains the name of the cookie. |
CookiePath | This property contains a path name to limit the cookie to (if provided by the server). |
CookieSecure | This property contains the security flag of the received cookie. |
CookieValue | This property contains the value of the cookie. |
FirewallAutoDetect | This property tells the control whether or not to automatically detect and use firewall system settings, if available. |
FirewallType | This property determines the type of firewall to connect through. |
FirewallHost | This property contains the name or IP address of the firewall (optional). |
FirewallPassword | This property contains a password if authentication is to be used when connecting through the firewall. |
FirewallPort | This property contains the Transmission Control Protocol (TCP) port for the firewall Host . |
FirewallUser | This property contains a username if authentication is to be used when connecting through a firewall. |
FollowRedirects | This property determines what happens when the server issues a redirect. |
GrantType | The OAuth grant type used to acquire an OAuth access token. |
Idle | This property specifies the current status of the control. |
LocalHost | This property includes the name of the local host or user-assigned IP interface through which connections are initiated or accepted. |
OtherHeaders | This property includes other headers as determined by the user (optional). |
ParamCount | The number of records in the Param arrays. |
ParamName | This property contains the name of the parameter to be used in the request or returned in the response. |
ParamValue | This property contains the value of the parameter to be used in the request or returned in the response. |
ProxyAuthScheme | This property is used to tell the control which type of authorization to perform when connecting to the proxy. |
ProxyAutoDetect | This property tells the control whether or not to automatically detect and use proxy system settings, if available. |
ProxyPassword | This property contains a password if authentication is to be used for the proxy. |
ProxyPort | This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80). |
ProxyServer | If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified. |
ProxySSL | This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. |
ProxyUser | This property contains a username if authentication is to be used for the proxy. |
RefreshToken | The refresh token received from or sent to the authorization server. |
ReturnURL | The URL where the user (browser) returns after authenticating. |
ServerAuthURL | The URL of the authorization server. |
ServerTokenURL | The URL used to obtain the access token. |
SSLAcceptServerCertEffectiveDate | This is the date on which this certificate becomes valid. |
SSLAcceptServerCertExpirationDate | This is the date the certificate expires. |
SSLAcceptServerCertExtendedKeyUsage | This is a comma-delimited list of extended key usage identifiers. |
SSLAcceptServerCertFingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
SSLAcceptServerCertFingerprintSHA1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
SSLAcceptServerCertFingerprintSHA256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
SSLAcceptServerCertIssuer | This is the issuer of the certificate. |
SSLAcceptServerCertPrivateKey | This is the private key of the certificate (if available). |
SSLAcceptServerCertPrivateKeyAvailable | This property shows whether a PrivateKey is available for the selected certificate. |
SSLAcceptServerCertPrivateKeyContainer | This is the name of the PrivateKey container for the certificate (if available). |
SSLAcceptServerCertPublicKey | This is the public key of the certificate. |
SSLAcceptServerCertPublicKeyAlgorithm | This property contains the textual description of the certificate's public key algorithm. |
SSLAcceptServerCertPublicKeyLength | This is the length of the certificate's public key (in bits). |
SSLAcceptServerCertSerialNumber | This is the serial number of the certificate encoded as a string. |
SSLAcceptServerCertSignatureAlgorithm | The property contains the text description of the certificate's signature algorithm. |
SSLAcceptServerCertStore | This is the name of the certificate store for the client certificate. |
SSLAcceptServerCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SSLAcceptServerCertStoreType | This is the type of certificate store for this certificate. |
SSLAcceptServerCertSubjectAltNames | This property contains comma-separated lists of alternative subject names for the certificate. |
SSLAcceptServerCertThumbprintMD5 | This property contains the MD5 hash of the certificate. |
SSLAcceptServerCertThumbprintSHA1 | This property contains the SHA-1 hash of the certificate. |
SSLAcceptServerCertThumbprintSHA256 | This property contains the SHA-256 hash of the certificate. |
SSLAcceptServerCertUsage | This property contains the text description of UsageFlags . |
SSLAcceptServerCertUsageFlags | This property contains the flags that show intended use for the certificate. |
SSLAcceptServerCertVersion | This property contains the certificate's version number. |
SSLAcceptServerCertSubject | This is the subject of the certificate used for client authentication. |
SSLAcceptServerCertEncoded | This is the certificate (PEM/Base64 encoded). |
SSLCertEffectiveDate | This is the date on which this certificate becomes valid. |
SSLCertExpirationDate | This is the date the certificate expires. |
SSLCertExtendedKeyUsage | This is a comma-delimited list of extended key usage identifiers. |
SSLCertFingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
SSLCertFingerprintSHA1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
SSLCertFingerprintSHA256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
SSLCertIssuer | This is the issuer of the certificate. |
SSLCertPrivateKey | This is the private key of the certificate (if available). |
SSLCertPrivateKeyAvailable | This property shows whether a PrivateKey is available for the selected certificate. |
SSLCertPrivateKeyContainer | This is the name of the PrivateKey container for the certificate (if available). |
SSLCertPublicKey | This is the public key of the certificate. |
SSLCertPublicKeyAlgorithm | This property contains the textual description of the certificate's public key algorithm. |
SSLCertPublicKeyLength | This is the length of the certificate's public key (in bits). |
SSLCertSerialNumber | This is the serial number of the certificate encoded as a string. |
SSLCertSignatureAlgorithm | The property contains the text description of the certificate's signature algorithm. |
SSLCertStore | This is the name of the certificate store for the client certificate. |
SSLCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SSLCertStoreType | This is the type of certificate store for this certificate. |
SSLCertSubjectAltNames | This property contains comma-separated lists of alternative subject names for the certificate. |
SSLCertThumbprintMD5 | This property contains the MD5 hash of the certificate. |
SSLCertThumbprintSHA1 | This property contains the SHA-1 hash of the certificate. |
SSLCertThumbprintSHA256 | This property contains the SHA-256 hash of the certificate. |
SSLCertUsage | This property contains the text description of UsageFlags . |
SSLCertUsageFlags | This property contains the flags that show intended use for the certificate. |
SSLCertVersion | This property contains the certificate's version number. |
SSLCertSubject | This is the subject of the certificate used for client authentication. |
SSLCertEncoded | This is the certificate (PEM/Base64 encoded). |
SSLProvider | This property specifies the Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use. |
SSLServerCertEffectiveDate | This is the date on which this certificate becomes valid. |
SSLServerCertExpirationDate | This is the date the certificate expires. |
SSLServerCertExtendedKeyUsage | This is a comma-delimited list of extended key usage identifiers. |
SSLServerCertFingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
SSLServerCertFingerprintSHA1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
SSLServerCertFingerprintSHA256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
SSLServerCertIssuer | This is the issuer of the certificate. |
SSLServerCertPrivateKey | This is the private key of the certificate (if available). |
SSLServerCertPrivateKeyAvailable | This property shows whether a PrivateKey is available for the selected certificate. |
SSLServerCertPrivateKeyContainer | This is the name of the PrivateKey container for the certificate (if available). |
SSLServerCertPublicKey | This is the public key of the certificate. |
SSLServerCertPublicKeyAlgorithm | This property contains the textual description of the certificate's public key algorithm. |
SSLServerCertPublicKeyLength | This is the length of the certificate's public key (in bits). |
SSLServerCertSerialNumber | This is the serial number of the certificate encoded as a string. |
SSLServerCertSignatureAlgorithm | The property contains the text description of the certificate's signature algorithm. |
SSLServerCertStore | This is the name of the certificate store for the client certificate. |
SSLServerCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
SSLServerCertStoreType | This is the type of certificate store for this certificate. |
SSLServerCertSubjectAltNames | This property contains comma-separated lists of alternative subject names for the certificate. |
SSLServerCertThumbprintMD5 | This property contains the MD5 hash of the certificate. |
SSLServerCertThumbprintSHA1 | This property contains the SHA-1 hash of the certificate. |
SSLServerCertThumbprintSHA256 | This property contains the SHA-256 hash of the certificate. |
SSLServerCertUsage | This property contains the text description of UsageFlags . |
SSLServerCertUsageFlags | This property contains the flags that show intended use for the certificate. |
SSLServerCertVersion | This property contains the certificate's version number. |
SSLServerCertSubject | This is the subject of the certificate used for client authentication. |
SSLServerCertEncoded | This is the certificate (PEM/Base64 encoded). |
Timeout | This property includes the timeout for the control. |
TransferredData | The contents of the last response from the server. |
TransferredHeaders | This property includes the full set of headers as received from the server. |
UsePKCE | Whether Proof Key for Code Exchange (PKCE) should be used. |
WebServerPort | The local port on which the embedded web server listens. |
WebServerSSLCertEffectiveDate | This is the date on which this certificate becomes valid. |
WebServerSSLCertExpirationDate | This is the date the certificate expires. |
WebServerSSLCertExtendedKeyUsage | This is a comma-delimited list of extended key usage identifiers. |
WebServerSSLCertFingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
WebServerSSLCertFingerprintSHA1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
WebServerSSLCertFingerprintSHA256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
WebServerSSLCertIssuer | This is the issuer of the certificate. |
WebServerSSLCertPrivateKey | This is the private key of the certificate (if available). |
WebServerSSLCertPrivateKeyAvailable | This property shows whether a PrivateKey is available for the selected certificate. |
WebServerSSLCertPrivateKeyContainer | This is the name of the PrivateKey container for the certificate (if available). |
WebServerSSLCertPublicKey | This is the public key of the certificate. |
WebServerSSLCertPublicKeyAlgorithm | This property contains the textual description of the certificate's public key algorithm. |
WebServerSSLCertPublicKeyLength | This is the length of the certificate's public key (in bits). |
WebServerSSLCertSerialNumber | This is the serial number of the certificate encoded as a string. |
WebServerSSLCertSignatureAlgorithm | The property contains the text description of the certificate's signature algorithm. |
WebServerSSLCertStore | This is the name of the certificate store for the client certificate. |
WebServerSSLCertStorePassword | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
WebServerSSLCertStoreType | This is the type of certificate store for this certificate. |
WebServerSSLCertSubjectAltNames | This property contains comma-separated lists of alternative subject names for the certificate. |
WebServerSSLCertThumbprintMD5 | This property contains the MD5 hash of the certificate. |
WebServerSSLCertThumbprintSHA1 | This property contains the SHA-1 hash of the certificate. |
WebServerSSLCertThumbprintSHA256 | This property contains the SHA-256 hash of the certificate. |
WebServerSSLCertUsage | This property contains the text description of UsageFlags . |
WebServerSSLCertUsageFlags | This property contains the flags that show intended use for the certificate. |
WebServerSSLCertVersion | This property contains the certificate's version number. |
WebServerSSLCertSubject | This is the subject of the certificate used for client authentication. |
WebServerSSLCertEncoded | This is the certificate (PEM/Base64 encoded). |
WebServerSSLEnabled | Whether the web server requires Secure Sockets Layer (SSL) connections. |
Method List
The following is the full list of the methods of the control with short descriptions. Click on the links for further details.
AddCookie | This method adds a cookie and the corresponding value to the outgoing request headers. |
AddParam | Adds a name-value pair to the query string parameters of the outgoing request. |
Config | Sets or retrieves a configuration setting. |
DoEvents | This method processes events from the internal message queue. |
GetAuthorization | Gets the authorization string required to access the protected resource. |
GetAuthorizationURL | Builds and returns the URL to which the user should be redirected for authorization. |
GetParam | Gets a specific parameter from a query string. |
Interrupt | This method interrupts the current method. |
Reset | This method will reset the control. |
StartWebServer | Starts the embedded web server. |
StopWebServer | Stops the embedded web server. |
Event List
The following is the full list of the events fired by the control with short descriptions. Click on the links for further details.
Connected | This event is fired immediately after a connection completes (or fails). |
ConnectionStatus | This event is fired to indicate changes in the connection state. |
Disconnected | This event is fired when a connection is closed. |
EndTransfer | This event is fired when a document finishes transferring. |
Error | Fired when information is available about errors during data delivery. |
Header | This event is fired every time a header line comes in. |
LaunchBrowser | Fires before launching a browser with the authorization URL. |
Log | This event fires once for each log message. |
Redirect | This event is fired when a redirection is received from the server. |
ReturnURL | Fired when the user is redirected to the embedded web server. |
SetCookie | This event is fired for every cookie set by the server. |
SSLServerAuthentication | Fired after the server presents its certificate to the client. |
SSLStatus | Fired when secure connection progress messages are available. |
StartTransfer | This event is fired when a document starts transferring (after the headers). |
Status | This event is fired when the HTTP status line is received from the server. |
Transfer | This event is fired while a document transfers (delivers document). |
Config Settings
The following is a list of config settings for the control with short descriptions. Click on the links for further details.
AuthMethod | Specifies how the client credentials are sent to the token server. |
AuthorizationTokenType | The type of access token returned. |
BrowserResponseTimeout | Specifies the amount of time to wait for a response from the browser. |
DeviceGrantType | The grant type to be used when the ClientProfile is set to ocpDevice. |
DeviceUserCode | The device's user code when the ClientProfile is set to ocpDevice. |
FormVarCount | Specifies the number of additional form variables to include in the request. |
FormVarName[i] | Specifies the form variable name at the specified index. |
FormVarValue[i] | Specifies the form variable value at the specified index. |
IncludeClientCredsInBody | Whether to include the client credentials in the header or request body. |
IncludeEmptyRedirectURI | Whether an empty redirect_uri parameter is included in requests. |
JWTAudience | The JWT audience when the ClientProfile is set to ocpJWT. |
JWTCertStore | The name of the certificate store for the JWT signing certificate. |
JWTCertStorePassword | The JWT signing certificate password. |
JWTCertStoreType | The type of certificate store. |
JWTCertSubject | The JWT signing certificate subject. |
JWTIssuer | The JWT issuer when the ClientProfile is set to ocpJWT. |
JWTJSONKey | The data or file path of the JWT JSON Key. |
JWTPayload | The payload of the JWT access token, if present. |
JWTServiceProvider | The service provider to which authentication is being performed. |
JWTSignatureAlgorithm | The signature algorithm used to sign the JWT. |
JWTSubject | The subject field in the JWT. |
JWTValidityTime | The amount of time in seconds for which the assertion in the JWT is valid. |
JWTXChildCount | The number of child elements of the current element. |
JWTXChildName[i] | The name of the child element. |
JWTXChildXText[i] | The inner text of the child element. |
JWTXElement | The name of the current element. |
JWTXParent | The parent of the current element. |
JWTXPath | Points to a specific element in the returned payload of a JWT based access token. |
JWTXSubTree | A snapshot of the current element in the document. |
JWTXText | The text of the current element. |
Microsoft365AdminConsentError | The error message returned when the admin denies consent to the scopes. |
Microsoft365AdminConsentErrorDesc | The error description returned when the admin denies consent to the scopes. |
Microsoft365AdminConsentTenant | The tenant ID returned after the admin consents to the scopes. |
Office365ServiceAPIVersion | The API version of the Office 365 service being discovered. |
Office365ServiceCapability | The API capability of the Office 365 service being discovered. |
Office365ServiceEndpoint | The Office 365 endpoint for the service that matches the criteria specified. |
PasswordGrantUsername | The Username field when using the password grant type. |
PKCEChallengeEncoding | The PKCE code challenge method to use. |
PKCEVerifier | The PKCE verifier used to generate the challenge. |
PollingInterval | The interval in seconds between polling requests when the device client profile is used. |
ResponseCompanyImage | A URL or full path to a company logo. |
ResponseCompanyURL | A URL to the company website or similar resource. |
ResponseFailureHeading | Short header text indicating failure. |
ResponseFailureMessage | A description for a failed authorization. |
ResponseHelpURL | A URL to a help page or other resource. |
ResponseLicenseURL | A URL to licensing terms. |
ResponseProductImage | A URL or full path to a product image. |
ResponseProductURL | A URL to a product page or similar resource. |
ResponseSuccessHeading | Short header text indicating success. |
ResponseSuccessMessage | A description for a successful authorization. |
ReUseWebServer | Determines if the same server instance is used between requests. |
TokenInfoFieldCount | The number of fields in the tokeninfo service response. |
TokenInfoFieldName[i] | The name of the tokeninfo service response field. |
TokenInfoFieldValue[i] | The value of the tokeninfo service response field. |
TokenInfoURL | The URL of the tokeninfo service. |
ValidateToken | Validates the specified access token with a tokeninfo service. |
WebServerFailedResponse | The custom response that will be displayed to the user if authentication failed. |
WebServerHost | The hostname used by the embedded web server displayed in the ReturnURL. |
WebServerResponse | The custom response that is displayed to the user. |
AcceptEncoding | Used to tell the server which types of content encodings the client supports. |
AllowHTTPCompression | This property enables HTTP compression for receiving data. |
AllowHTTPFallback | Whether HTTP/2 connections are permitted to fallback to HTTP/1.1. |
Append | Whether to append data to LocalFile. |
Authorization | The Authorization string to be sent to the server. |
BytesTransferred | Contains the number of bytes transferred in the response data. |
ChunkSize | Specifies the chunk size in bytes when using chunked encoding. |
CompressHTTPRequest | Set to true to compress the body of a PUT or POST request. |
EncodeURL | If set to True the URL will be encoded by the control. |
FollowRedirects | Determines what happens when the server issues a redirect. |
GetOn302Redirect | If set to True the control will perform a GET on the new location. |
HTTP2HeadersWithoutIndexing | HTTP2 headers that should not update the dynamic header table with incremental indexing. |
HTTPVersion | The version of HTTP used by the control. |
IfModifiedSince | A date determining the maximum age of the desired document. |
KeepAlive | Determines whether the HTTP connection is closed after completion of the request. |
KerberosSPN | The Service Principal Name for the Kerberos Domain Controller. |
LogLevel | The level of detail that is logged. |
MaxRedirectAttempts | Limits the number of redirects that are followed in a request. |
NegotiatedHTTPVersion | The negotiated HTTP version. |
OtherHeaders | Other headers as determined by the user (optional). |
ProxyAuthorization | The authorization string to be sent to the proxy server. |
ProxyAuthScheme | The authorization scheme to be used for the proxy. |
ProxyPassword | A password if authentication is to be used for the proxy. |
ProxyPort | Port for the proxy server (default 80). |
ProxyServer | Name or IP address of a proxy server (optional). |
ProxyUser | A user name if authentication is to be used for the proxy. |
SentHeaders | The full set of headers as sent by the client. |
StatusCode | The status code of the last response from the server. |
StatusLine | The first line of the last response from the server. |
TransferredData | The contents of the last response from the server. |
TransferredDataLimit | The maximum number of incoming bytes to be stored by the control. |
TransferredHeaders | The full set of headers as received from the server. |
TransferredRequest | The full request as sent by the client. |
UseChunkedEncoding | Enables or Disables HTTP chunked encoding for transfers. |
UseIDNs | Whether to encode hostnames to internationalized domain names. |
UseProxyAutoConfigURL | Whether to use a Proxy auto-config file when attempting a connection. |
UserAgent | Information about the user agent (browser). |
ConnectionTimeout | Sets a separate timeout value for establishing a connection. |
FirewallAutoDetect | Tells the control whether or not to automatically detect and use firewall system settings, if available. |
FirewallHost | Name or IP address of firewall (optional). |
FirewallPassword | Password to be used if authentication is to be used when connecting through the firewall. |
FirewallPort | The TCP port for the FirewallHost;. |
FirewallType | Determines the type of firewall to connect through. |
FirewallUser | A user name if authentication is to be used connecting through a firewall. |
KeepAliveInterval | The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received. |
KeepAliveTime | The inactivity time in milliseconds before a TCP keep-alive packet is sent. |
Linger | When set to True, connections are terminated gracefully. |
LingerTime | Time in seconds to have the connection linger. |
LocalHost | The name of the local host through which connections are initiated or accepted. |
LocalPort | The port in the local host where the control binds. |
MaxLineLength | The maximum amount of data to accumulate when no EOL is found. |
MaxTransferRate | The transfer rate limit in bytes per second. |
ProxyExceptionsList | A semicolon separated list of hosts and IPs to bypass when using a proxy. |
TCPKeepAlive | Determines whether or not the keep alive socket option is enabled. |
TcpNoDelay | Whether or not to delay when sending packets. |
UseIPv6 | Whether to use IPv6. |
AbsoluteTimeout | Determines whether timeouts are inactivity timeouts or absolute timeouts. |
FirewallData | Used to send extra data to the firewall. |
InBufferSize | The size in bytes of the incoming queue of the socket. |
OutBufferSize | The size in bytes of the outgoing queue of the socket. |
CodePage | The system code page used for Unicode to Multibyte translations. |
MaskSensitiveData | Whether sensitive data is masked in log messages. |
UseInternalSecurityAPI | Whether or not to use the system security libraries or an internal implementation. |
AccessToken Property (OAuth Control)
The access token returned by the authorization server.
Syntax
oauthcontrol.AccessToken[=string]
Default Value
""
Remarks
This property will be populated with the access token returned by the authorization server after a call to GetAuthorization. This will be the raw access token, whereas the return value from the GetAuthorization method will also include the required data so that it can be passed directly to the Authorization property of other components or added as the value of the authorization header in another client implementation.
Data Type
String
AccessTokenExp Property (OAuth Control)
The lifetime of the access token.
Syntax
oauthcontrol.AccessTokenExp
Default Value
0
Remarks
This setting holds the lifetime of the access token in seconds. For instance the value 3600 indicates that the token will expire in one hour from the time it was generated.
This property is read-only.
Data Type
Integer
AuthorizationCode Property (OAuth Control)
The authorization code that is exchanged for an access token.
Syntax
oauthcontrol.AuthorizationCode[=string]
Default Value
""
Remarks
This property is used with the AuthorizationCode GrantType. When ClientProfile is set to ocpApplication (Application flow), this property will be informational only, as the GetAuthorization method will automatically exchange this code for a token with the authorization server specified in ServerTokenURL.
When ClientProfile is set to ocpWeb (Web flow), this property needs to be set to the authorization code returned from the authorization server. Typically, this value is parsed when the service redirects the user back to your website. See ClientProfile for more information.
If this property is set before calling GetAuthorization, the control will not make a request to the authorization sever and instead will attempt to exchange the code with the authorization server for an access token.
This property is not available at design time.
Data Type
String
AuthorizationScope Property (OAuth Control)
The scope request or response parameter used during authorization.
Syntax
oauthcontrol.AuthorizationScope[=string]
Default Value
""
Remarks
If the scope is not set, the authorization server will use the default access scope for your application as determined by the server. To request a specific access scope, set this property to a space-separated list of strings as defined by the authorization server.
After calling GetAuthorization, this property will be updated with the scope sent in the response from the server and will indicate the scope that was actually granted.
Data Type
String
ClientId Property (OAuth Control)
The Id of the client assigned when registering the application.
Syntax
oauthcontrol.ClientId[=string]
Default Value
""
Remarks
This property holds the Id of the client that was assigned when initially registering the application with the authorization server. This value must be specified before calling GetAuthorization or GetAuthorizationURL.
Data Type
String
ClientProfile Property (OAuth Control)
The type of client that is requesting authorization.
Syntax
oauthcontrol.ClientProfile[=integer]
Possible Values
ocpApplication(0), ocpWeb(1), ocpDevice(2), ocpMobile(3), ocpJWT(4)
Default Value
0
Remarks
This defines the type of client that will be requesting authorization. Set this before calling GetAuthorization to inform the control to act accordingly. Possible values are as follows:
0 (ocpApplication - default) | User application, such as a Windows form application |
1 (ocpWeb) | Server-side application, such as a website |
2 (ocpDevice) | Device application without a browser, such as a game console |
3 (ocpMobile) | Mobile application with browser support, such as a smart phone or tablet |
4 (ocpBrowser) | Client-side browser application, such as JavaScript |
5 (ocpJWT) | Server-to-Server authentication using a JWT Bearer Token |
Application Profile
The Application profile is applicable to applications that are run directly by the user. For instance, a Windows form application would use the Application profile. To authorize your application (client) using the Application profile, use the following steps:
First, set ClientProfile to ocpApplication. This defines the profile the control will use. Set the ClientId, ClientSecret, ServerAuthURL, and ServerTokenURL to the values you obtained when registering your application.
Second, call GetAuthorization to begin the authorization process. When GetAuthorization is called, the control will build the URL to which the user will be directed and fire the LaunchBrowser event. The control will then launch the browser using the command and URL shown in the LaunchBrowser event and await the response. The duration for which the control will wait for a response is defined by BrowserResponseTimeout.
Third, the user will interact with the browser to authenticate and grant access to the connecting application. The user will then be redirected back to an embedded web server that was automatically started when GetAuthorization was called. At this time, the ReturnURL event will fire. This event provides an opportunity to provide a custom response to your user that they will see in their browser.
Fourth, the control will then automatically exchange the grant that was returned by the authorization server for the access token using the HTTP endpoint specified in ServerTokenURL.
The authorization is now complete and the GetAuthorization method will return the authorization string. The authorization string can then be used with any of our components by simply setting the returned value to the authorization property before making a request.
The following is a simple example:
component.ClientId = "CLIENT_ID";
component.ClientSecret = "CLIENT_ID";
component.ServerAuthURL = "https://accounts.google.com/o/oauth2/auth";
component.ServerTokenURL = "https://accounts.google.com/o/oauth2/token";
HTTP.Authorization = component.GetAuthorization();
HTTP.Get("https://www.googleapis.com/oauth2/v1/userinfo");
Web Profile
The Web profile is applicable to applications that are run on the server side when the user uses the application from a web browser. To authorize your application (client) using this profile, use the following steps:
First, set ClientProfile to ocpWeb. This defines the profile the component will use. Set the ClientId, ClientSecret, ServerAuthURL, and ServerTokenURL to the values you obtained when registering your application. Set ReturnURL to the page on your site that will be the endpoint the user is redirected back to after authentication.
Second, call GetAuthorizationURL. This will return a URL to which the user should be redirected. Redirect the user to this URL.
Third, after the user authenticates and is returned to the page on your site specified by ReturnURL, parse the "code" query string parameter from the incoming request to get the authorization code from the authorization server. Then, set AuthorizationCode property to the parsed value.
Fourth, after AuthorizationCode is set, call GetAuthorization to exchange the code specified in AuthorizationCode for a token from the server specified by ServerTokenURL. GetAuthorization will then return the authorization string. The authorization string can be used with any of our components by simply setting the returned value to the authorization property before making a request.
Device Profile
The Device profile is applicable to applications that are run on devices for which a web browser cannot be used. For example, a game console would use the Device profile. To authorize your application (client) using the device client profile use the following steps:
First, set ClientProfile to ocpDevice. This defines the profile the control will use. Set the ClientId, ClientSecret, ServerAuthURL, and ServerTokenURL to the values you obtained when registering your application. Do not set ReturnURL.
Second, call GetAuthorizationURL. The control will automatically make a request to ServerAuthURL to obtain a user code for the device. The GetAuthorizationURL method will return the URL your user must visit from another device or computer that has web browser support. The GetAuthorizationURL method will also populate DeviceUserCode. This device user code must be provided to the user. The user will enter the code at the URL returned by GetAuthorizationURL.
Third, at this time, call GetAuthorization. The control will begin polling the server specified in ServerTokenURL. The polling interval is specified (in seconds) by the PollingInterval setting.
Fourth, after the user has authenticated, the GetAuthorization method will return the authorization string. To use the authorization string with any of our components, simply pass this value to the authorization property before making the request.
Mobile Profile
The Mobile profile is applicable to applications that are run on devices for which a web browser can be used. For instance, a mobile phone or tablet would use the Mobile profile. The behavior when using this profile is very similar to the Application profile. The only difference between the Mobile and Application profiles is the way the browser is launched. When set to the Mobile profile, the LaunchBrowser event will fire but the control will not attempt to launch the browser automatically. The browser must be launched manually from code. This behavior is the only difference between the Mobile and Application profiles. Please read the steps for the Application profile for a more detailed look at the process.
JWT Bearer Token (Server-to-Server) Profile
The JWT (JSON Web Token) Bearer Token profile is available for server-to-server authentication. For instance this may be used by web applications to access a Google service. In this case, the application will access data on behalf of the service account, not the end user. End-user interaction is not required.
First, specify AuthorizationScope ServerTokenURL and JWTServiceProvider.
Second, specify JWT-specific values. The use of the JWT profile also requires additional configuration settings to be specified, including a certificate with private key used to sign the JWT. Either specify the JWTJSONKey configuration setting, which will parse the necessary information automatically, or manually specify the following configuration settings:
- JWTIssuer (required)
- JWTAudience (required)
- JWTCertStoreType (required)
- JWTCertStore (required)
- JWTCertStorePassword (required)
- JWTCertSubject (required)
- JWTSubject
- JWTValidityTime
- JWTSignatureAlgorithm
Example 1. Google:
oauth.AuthorizationScope = "https://www.googleapis.com/auth/analytics";
oauth.ServerTokenURL = "https://www.googleapis.com/oauth2/v3/token";
oauth.ClientProfile = OauthClientProfiles.ocpJWT;
oauth.Config("JWTServiceProvider=0");
oauth.Config("JWTIssuer=CLIENT_ID");
oauth.Config("JWTAudience=https://www.googleapis.com/oauth2/v3/token");
oauth.Config("JWTCertStoreType=2");
oauth.Config("JWTCertStore=C:\\MyCertificate.p12");
oauth.Config("JWTCertStorePassword=password");
oauth.Config("JWTCertSubject=*");
oauth.Config("JWTValidityTime=5400"); //in seconds
string authStr = oauth.GetAuthorization();
Example 2. Microsoft:
oauth.ClientId = "Client_Id";
oauth.ClientProfile = OauthClientProfiles.ocpJWT;
oauth.AuthorizationScope = "https://graph.microsoft.com/.default";
oauth.ServerTokenURL = "https://login.microsoftonline.com/" + tenant_id + "/oauth2/V2.0/token";
oauth.Config("JWTServiceProvider=1");
oauth.Config("JWTIssuer=" + CLIENT_ID);
oauth.Config("JWTSubject=" + CLIENT_ID);
oauth.Config("JWTCertStoreType=2");
oauth.Config("JWTCertStore=C:\\MyCertificate.p12");
oauth.Config("JWTCertStorePassword=password");
oauth.Config("JWTCertSubject=*");
oauth.Config("JWTValidityTime=3600");
oauth.Config("JWTAudience=https://login.microsoftonline.com/"+ tenant_id + "/oauth2/V2.0/token");
string authStr = oauth.GetAuthorization();
Data Type
Integer
ClientSecret Property (OAuth Control)
The secret value for the client assigned when registering the application.
Syntax
oauthcontrol.ClientSecret[=string]
Default Value
""
Remarks
This property holds the secret of the client that was assigned when initially registering the application with the authorization server. This value must be specified before calling GetAuthorization or GetAuthorizationURL.
Data Type
String
Connected Property (OAuth Control)
This property shows whether the control is connected.
Syntax
oauthcontrol.Connected
Default Value
False
Remarks
This property is used to determine whether or not the control is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.
This property is read-only and not available at design time.
Data Type
Boolean
CookieCount Property (OAuth Control)
The number of records in the Cookie arrays.
Syntax
oauthcontrol.CookieCount[=integer]
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at CookieCount - 1.This property is not available at design time.
Data Type
Integer
CookieDomain Property (OAuth Control)
This is the domain of a received cookie.
Syntax
oauthcontrol.CookieDomain(CookieIndex)
Default Value
""
Remarks
This is the domain of a received cookie. This property contains a domain name to limit the cookie to (if provided by the server). If the server does not provide a domain name, this property will contain an empty string. The convention in this case is to use the server name specified by URLServer as the cookie domain.
The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.
This property is read-only and not available at design time.
Data Type
String
CookieExpiration Property (OAuth Control)
This property contains an expiration time for the cookie (if provided by the server).
Syntax
oauthcontrol.CookieExpiration(CookieIndex)
Default Value
""
Remarks
This property contains an expiration time for the cookie (if provided by the server). The time format used is "Weekday, DD-Mon-YY HH:MM:SS GMT". If the server does not provide an expiration time, this property will contain an empty string. The convention is to drop the cookie at the end of the session.
The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.
This property is read-only and not available at design time.
Data Type
String
CookieName Property (OAuth Control)
This property, contains the name of the cookie.
Syntax
oauthcontrol.CookieName(CookieIndex)[=string]
Default Value
""
Remarks
This property, contains the name of the cookie.
This property, along with CookieValue, stores the cookie that is to be sent to the server. The SetCookie event displays the cookies sent by the server and their properties.
The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.
This property is not available at design time.
Data Type
String
CookiePath Property (OAuth Control)
This property contains a path name to limit the cookie to (if provided by the server).
Syntax
oauthcontrol.CookiePath(CookieIndex)
Default Value
""
Remarks
This property contains a path name to limit the cookie to (if provided by the server). If the server does not provide a cookie path, the path property will be an empty string. The convention in this case is to use the path specified by URLPath as the cookie path.
The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.
This property is read-only and not available at design time.
Data Type
String
CookieSecure Property (OAuth Control)
This property contains the security flag of the received cookie.
Syntax
oauthcontrol.CookieSecure(CookieIndex)
Default Value
False
Remarks
This property contains the security flag of the received cookie. This property specifies whether the cookie is secure. If the value of this property is True, the cookie value must be submitted only through a secure (HTTPS) connection.
The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.
This property is read-only and not available at design time.
Data Type
Boolean
CookieValue Property (OAuth Control)
This property contains the value of the cookie.
Syntax
oauthcontrol.CookieValue(CookieIndex)[=string]
Default Value
""
Remarks
This property contains the value of the cookie. A corresponding value is associated with the cookie specified by CookieName. This property holds that value.
The SetCookie event provides the cookies set by the server.
The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.
This property is not available at design time.
Data Type
String
FirewallAutoDetect Property (OAuth Control)
This property tells the control whether or not to automatically detect and use firewall system settings, if available.
Syntax
oauthcontrol.FirewallAutoDetect[=boolean]
Default Value
False
Remarks
This property tells the control whether or not to automatically detect and use firewall system settings, if available.
Data Type
Boolean
FirewallType Property (OAuth Control)
This property determines the type of firewall to connect through.
Syntax
oauthcontrol.FirewallType[=integer]
Possible Values
fwNone(0), fwTunnel(1), fwSOCKS4(2), fwSOCKS5(3), fwSOCKS4A(10)
Default Value
0
Remarks
This property determines the type of firewall to connect through. The applicable values are as follows:
fwNone (0) | No firewall (default setting). |
fwTunnel (1) | Connect through a tunneling proxy. FirewallPort is set to 80. |
fwSOCKS4 (2) | Connect through a SOCKS4 Proxy. FirewallPort is set to 1080. |
fwSOCKS5 (3) | Connect through a SOCKS5 Proxy. FirewallPort is set to 1080. |
fwSOCKS4A (10) | Connect through a SOCKS4A Proxy. FirewallPort is set to 1080. |
Data Type
Integer
FirewallHost Property (OAuth Control)
This property contains the name or IP address of the firewall (optional).
Syntax
oauthcontrol.FirewallHost[=string]
Default Value
""
Remarks
This property contains the name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.
If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the control fails with an error.
Data Type
String
FirewallPassword Property (OAuth Control)
This property contains a password if authentication is to be used when connecting through the firewall.
Syntax
oauthcontrol.FirewallPassword[=string]
Default Value
""
Remarks
This property contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the control fails with an error.
Data Type
String
FirewallPort Property (OAuth Control)
This property contains the Transmission Control Protocol (TCP) port for the firewall Host .
Syntax
oauthcontrol.FirewallPort[=integer]
Default Value
0
Remarks
This property contains the Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.
Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.
Data Type
Integer
FirewallUser Property (OAuth Control)
This property contains a username if authentication is to be used when connecting through a firewall.
Syntax
oauthcontrol.FirewallUser[=string]
Default Value
""
Remarks
This property contains a username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the control fails with an error.
Data Type
String
FollowRedirects Property (OAuth Control)
This property determines what happens when the server issues a redirect.
Syntax
oauthcontrol.FollowRedirects[=integer]
Possible Values
frNever(0), frAlways(1), frSameScheme(2)
Default Value
0
Remarks
This property determines what happens when the server issues a redirect. Normally, the control returns an error if the server responds with an "Object Moved" message. If this property is set to frAlways (1), the new URL for the object is retrieved automatically every time.
If this property is set to frSameScheme (2), the new URL is retrieved automatically only if the URLScheme is the same; otherwise, the control fails with an error.
Note: Following the HTTP specification, unless this property is set to frAlways (1), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.
Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty. If, however, this property is set to frAlways (1), the same credentials are used to connect to the new server.
A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).
The default value is frNever (0). In this case, redirects are never followed, and the control fails with an error instead.
Data Type
Integer
GrantType Property (OAuth Control)
The OAuth grant type used to acquire an OAuth access token.
Syntax
oauthcontrol.GrantType[=integer]
Possible Values
ogtAuthorizationCode(0), ogtImplicit(1), ogtPassword(2), ogtClientCredentials(3), ogtAdminConsent(4)
Default Value
0
Remarks
This setting specifies the type of grant to obtain. In most cases the Authorization Code grant type (default) is used, so it is typically not necessary to change this. The supported values are:
0 (ogtAuthorizationCode - Default) | Authorization Code grant type |
1 (ogtImplicit) | Implicit grant type |
2 (ogtPassword) | Resource Owner Password Credentials grant type |
3 (ogtClientCredentials) | Client Credentials grant type |
4 (ogtAdminConsent) | Admin consent for Microsoft API application scopes |
For all grant types listed set ClientProfile to Application.
The Authorization Code grant is the most commonly used grant type. It follows the flow described for the Application Client Profile section in the OAuth introduction page.
Implicit grants are similar to Authorization Code, except that a Bearer token is returned directly from the authorization server without requiring a second step to exchange a code for a bearer token. To use this grant type set:
And call GetAuthorization.The Resource Owner Password Credentials grant type may be used to authenticate on behalf of a resource owner with the owner's credentials. Authentication is performed directly and the user is not prompted to authenticate the application. To use this grant type set:
- PasswordGrantUsername to the username of the resource owner
- ClientSecret to the password of the resource owner
- ClientId optional, set to the client id for the resource
- ServerTokenURL
The Client Credentials grant type is typically used for server-to-server authentication. The client authenticates directly to the authentication server and receives a token without any user interaction. To use this grant type set:
And call GetAuthorization.The AdminConsent grant type is used when setting up application permissions for apps that authenticate to Microsoft. To use this grant type set:
And call GetAuthorization. The control will then start the embedded web server, fire the LaunchBrowser event, and open the admin consent page URL.If the Admin consents to the scopes, the tenant ID can be accessed through the Microsoft365AdminConsentTenant configuration and is often needed for authenticating a client later (eg. Client Credentials Grant Flow). Once the Admin consents once, they typically will not need to go through the process again unless the scopes of the application change.
If the Admin does not consent to the scopes, the error message can be found in the Microsoft365AdminConsentError configuration setting and the error description can be found in the Microsoft365AdminConsentErrorDesc configuration setting.
Data Type
Integer
Idle Property (OAuth Control)
This property specifies the current status of the control.
Syntax
oauthcontrol.Idle
Default Value
True
Remarks
Idle will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.
This property is read-only.
Data Type
Boolean
LocalHost Property (OAuth Control)
This property includes the name of the local host or user-assigned IP interface through which connections are initiated or accepted.
Syntax
oauthcontrol.LocalHost[=string]
Default Value
""
Remarks
The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.
In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the control initiate connections (or accept in the case of server controls) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.
If the control is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).
Note: LocalHost is not persistent. You must always set it in code, and never in the property window.
Data Type
String
OtherHeaders Property (OAuth Control)
This property includes other headers as determined by the user (optional).
Syntax
oauthcontrol.OtherHeaders[=string]
Default Value
""
Remarks
This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like ContentType and From.
The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by CRLF (Chr$(13) & Chr$(10)) .
Use this property with caution. If this property contains invalid headers, HTTP requests may fail.
This property is useful for extending the functionality of the control beyond what is provided.
This property is not available at design time.
Data Type
String
ParamCount Property (OAuth Control)
The number of records in the Param arrays.
Syntax
oauthcontrol.ParamCount[=integer]
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at ParamCount - 1.This property is not available at design time.
Data Type
Integer
ParamName Property (OAuth Control)
This property contains the name of the parameter to be used in the request or returned in the response.
Syntax
oauthcontrol.ParamName(ParamIndex)[=string]
Default Value
""
Remarks
This property contains the name of the parameter to be used in the request or returned in the response.
The ParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ParamCount property.
This property is not available at design time.
Data Type
String
ParamValue Property (OAuth Control)
This property contains the value of the parameter to be used in the request or returned in the response.
Syntax
oauthcontrol.ParamValue(ParamIndex)[=string]
Default Value
""
Remarks
This property contains the value of the parameter to be used in the request or returned in the response. When issuing a request, the control will URL encode the value specified here. Returned values will be automatically URL decoded.
The ParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ParamCount property.
This property is not available at design time.
Data Type
String
ProxyAuthScheme Property (OAuth Control)
This property is used to tell the control which type of authorization to perform when connecting to the proxy.
Syntax
oauthcontrol.ProxyAuthScheme[=integer]
Possible Values
authBasic(0), authDigest(1), authProprietary(2), authNone(3), authNtlm(4), authNegotiate(5)
Default Value
0
Remarks
This property is used to tell the control which type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.
ProxyAuthScheme should be set to authNone (3) when no authentication is expected.
By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the component will attempt basic authentication.
If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.
If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the control. Look at the configuration file for the control being used to find more information about manually setting this token.
If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.
For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.
Data Type
Integer
ProxyAutoDetect Property (OAuth Control)
This property tells the control whether or not to automatically detect and use proxy system settings, if available.
Syntax
oauthcontrol.ProxyAutoDetect[=boolean]
Default Value
False
Remarks
This property tells the control whether or not to automatically detect and use proxy system settings, if available. The default value is .
Data Type
Boolean
ProxyPassword Property (OAuth Control)
This property contains a password if authentication is to be used for the proxy.
Syntax
oauthcontrol.ProxyPassword[=string]
Default Value
""
Remarks
This property contains a password if authentication is to be used for the proxy.
If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].
If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.
If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.
Data Type
String
ProxyPort Property (OAuth Control)
This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).
Syntax
oauthcontrol.ProxyPort[=integer]
Default Value
80
Remarks
This property contains the Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.
Data Type
Integer
ProxyServer Property (OAuth Control)
If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.
Syntax
oauthcontrol.ProxyServer[=string]
Default Value
""
Remarks
If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.
If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.
Data Type
String
ProxySSL Property (OAuth Control)
This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.
Syntax
oauthcontrol.ProxySSL[=integer]
Possible Values
psAutomatic(0), psAlways(1), psNever(2), psTunnel(3)
Default Value
0
Remarks
This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:
psAutomatic (0) | Default setting. If the URL is an https URL, the control will use the psTunnel option. If the URL is an http URL, the control will use the psNever option. |
psAlways (1) | The connection is always SSL-enabled. |
psNever (2) | The connection is not SSL-enabled. |
psTunnel (3) | The connection is made through a tunneling (HTTP) proxy. |
Data Type
Integer
ProxyUser Property (OAuth Control)
This property contains a username if authentication is to be used for the proxy.
Syntax
oauthcontrol.ProxyUser[=string]
Default Value
""
Remarks
This property contains a username if authentication is to be used for the proxy.
If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword properties are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].
If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.
If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.
Data Type
String
RefreshToken Property (OAuth Control)
The refresh token received from or sent to the authorization server.
Syntax
oauthcontrol.RefreshToken[=string]
Default Value
""
Remarks
When GetAuthorization is called, if the authorization server returns a refresh token along with the access token, this property will hold the refresh token. Save this value for later use.
When your access token expires, set this property to the corresponding refresh token. Then call GetAuthorization, and the control will use this token to retrieve a new access token. The new authorization string will be returned by the GetAuthorization method. No user interaction is required when refreshing an access token.
Data Type
String
ReturnURL Property (OAuth Control)
The URL where the user (browser) returns after authenticating.
Syntax
oauthcontrol.ReturnURL[=string]
Default Value
""
Remarks
When ClientProfile is set to ocpApplication, this will be automatically set to the address of the local embedded web server. In that case, this property can be inspected to determine the URL where the user will be redirected, but it does not need to be set.
When calling GetAuthorizationURL, which is common when ClientProfile is set to ocpWeb, set this property to the URL on your server where the user will be redirected after authenticating with the authorization server.
This property corresponds to the redirect_uri query string parameter.
Data Type
String
ServerAuthURL Property (OAuth Control)
The URL of the authorization server.
Syntax
oauthcontrol.ServerAuthURL[=string]
Default Value
""
Remarks
This property specifies the URL of the authorization server used when GetAuthorization is called. This value is used when constructing the URL to which the user will be redirected to authenticate and grant access.
This should be specified before calling GetAuthorization.
Data Type
String
ServerTokenURL Property (OAuth Control)
The URL used to obtain the access token.
Syntax
oauthcontrol.ServerTokenURL[=string]
Default Value
""
Remarks
The property specifies the URL where the grant will be exchanged for the access token. This is typically a separate HTTP endpoint on the authorization server.
This must be set before calling GetAuthorization.
Data Type
String
SSLAcceptServerCertEffectiveDate Property (OAuth Control)
This is the date on which this certificate becomes valid.
Syntax
oauthcontrol.SSLAcceptServerCertEffectiveDate
Default Value
""
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
Data Type
String
SSLAcceptServerCertExpirationDate Property (OAuth Control)
This is the date the certificate expires.
Syntax
oauthcontrol.SSLAcceptServerCertExpirationDate
Default Value
""
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
Data Type
String
SSLAcceptServerCertExtendedKeyUsage Property (OAuth Control)
This is a comma-delimited list of extended key usage identifiers.
Syntax
oauthcontrol.SSLAcceptServerCertExtendedKeyUsage
Default Value
""
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
Data Type
String
SSLAcceptServerCertFingerprint Property (OAuth Control)
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Syntax
oauthcontrol.SSLAcceptServerCertFingerprint
Default Value
""
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
Data Type
String
SSLAcceptServerCertFingerprintSHA1 Property (OAuth Control)
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Syntax
oauthcontrol.SSLAcceptServerCertFingerprintSHA1
Default Value
""
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
Data Type
String
SSLAcceptServerCertFingerprintSHA256 Property (OAuth Control)
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Syntax
oauthcontrol.SSLAcceptServerCertFingerprintSHA256
Default Value
""
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
Data Type
String
SSLAcceptServerCertIssuer Property (OAuth Control)
This is the issuer of the certificate.
Syntax
oauthcontrol.SSLAcceptServerCertIssuer
Default Value
""
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
Data Type
String
SSLAcceptServerCertPrivateKey Property (OAuth Control)
This is the private key of the certificate (if available).
Syntax
oauthcontrol.SSLAcceptServerCertPrivateKey
Default Value
""
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.
This property is read-only.
Data Type
String
SSLAcceptServerCertPrivateKeyAvailable Property (OAuth Control)
This property shows whether a PrivateKey is available for the selected certificate.
Syntax
oauthcontrol.SSLAcceptServerCertPrivateKeyAvailable
Default Value
False
Remarks
This property shows whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
Data Type
Boolean
SSLAcceptServerCertPrivateKeyContainer Property (OAuth Control)
This is the name of the PrivateKey container for the certificate (if available).
Syntax
oauthcontrol.SSLAcceptServerCertPrivateKeyContainer
Default Value
""
Remarks
This is the name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
Data Type
String
SSLAcceptServerCertPublicKey Property (OAuth Control)
This is the public key of the certificate.
Syntax
oauthcontrol.SSLAcceptServerCertPublicKey
Default Value
""
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
Data Type
String
SSLAcceptServerCertPublicKeyAlgorithm Property (OAuth Control)
This property contains the textual description of the certificate's public key algorithm.
Syntax
oauthcontrol.SSLAcceptServerCertPublicKeyAlgorithm
Default Value
""
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLAcceptServerCertPublicKeyLength Property (OAuth Control)
This is the length of the certificate's public key (in bits).
Syntax
oauthcontrol.SSLAcceptServerCertPublicKeyLength
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
Data Type
Integer
SSLAcceptServerCertSerialNumber Property (OAuth Control)
This is the serial number of the certificate encoded as a string.
Syntax
oauthcontrol.SSLAcceptServerCertSerialNumber
Default Value
""
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
Data Type
String
SSLAcceptServerCertSignatureAlgorithm Property (OAuth Control)
The property contains the text description of the certificate's signature algorithm.
Syntax
oauthcontrol.SSLAcceptServerCertSignatureAlgorithm
Default Value
""
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLAcceptServerCertStore Property (OAuth Control)
This is the name of the certificate store for the client certificate.
Syntax
oauthcontrol.SSLAcceptServerCertStore[=string]
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password protected, specify the password in SSLAcceptServerCertStorePassword.
SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertStoreB.
Data Type
Binary String
SSLAcceptServerCertStorePassword Property (OAuth Control)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
oauthcontrol.SSLAcceptServerCertStorePassword[=string]
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Data Type
String
SSLAcceptServerCertStoreType Property (OAuth Control)
This is the type of certificate store for this certificate.
Syntax
oauthcontrol.SSLAcceptServerCertStoreType[=integer]
Possible Values
cstUser(0), cstMachine(1), cstPFXFile(2), cstPFXBlob(3), cstJKSFile(4), cstJKSBlob(5), cstPEMKeyFile(6), cstPEMKeyBlob(7), cstPublicKeyFile(8), cstPublicKeyBlob(9), cstSSHPublicKeyBlob(10), cstP7BFile(11), cstP7BBlob(12), cstSSHPublicKeyFile(13), cstPPKFile(14), cstPPKBlob(15), cstXMLFile(16), cstXMLBlob(17), cstJWKFile(18), cstJWKBlob(19), cstSecurityKey(20), cstBCFKSFile(21), cstBCFKSBlob(22), cstPKCS11(23), cstAuto(99)
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: This store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr control. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLAcceptServerCertStore and set SSLAcceptServerCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
Data Type
Integer
SSLAcceptServerCertSubjectAltNames Property (OAuth Control)
This property contains comma-separated lists of alternative subject names for the certificate.
Syntax
oauthcontrol.SSLAcceptServerCertSubjectAltNames
Default Value
""
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
Data Type
String
SSLAcceptServerCertThumbprintMD5 Property (OAuth Control)
This property contains the MD5 hash of the certificate.
Syntax
oauthcontrol.SSLAcceptServerCertThumbprintMD5
Default Value
""
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLAcceptServerCertThumbprintSHA1 Property (OAuth Control)
This property contains the SHA-1 hash of the certificate.
Syntax
oauthcontrol.SSLAcceptServerCertThumbprintSHA1
Default Value
""
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLAcceptServerCertThumbprintSHA256 Property (OAuth Control)
This property contains the SHA-256 hash of the certificate.
Syntax
oauthcontrol.SSLAcceptServerCertThumbprintSHA256
Default Value
""
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLAcceptServerCertUsage Property (OAuth Control)
This property contains the text description of UsageFlags .
Syntax
oauthcontrol.SSLAcceptServerCertUsage
Default Value
""
Remarks
This property contains the text description of SSLAcceptServerCertUsageFlags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
Data Type
String
SSLAcceptServerCertUsageFlags Property (OAuth Control)
This property contains the flags that show intended use for the certificate.
Syntax
oauthcontrol.SSLAcceptServerCertUsageFlags
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
Data Type
Integer
SSLAcceptServerCertVersion Property (OAuth Control)
This property contains the certificate's version number.
Syntax
oauthcontrol.SSLAcceptServerCertVersion
Default Value
""
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
Data Type
String
SSLAcceptServerCertSubject Property (OAuth Control)
This is the subject of the certificate used for client authentication.
Syntax
oauthcontrol.SSLAcceptServerCertSubject[=string]
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
Data Type
String
SSLAcceptServerCertEncoded Property (OAuth Control)
This is the certificate (PEM/Base64 encoded).
Syntax
oauthcontrol.SSLAcceptServerCertEncoded[=string]
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.
When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.
To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLAcceptServerCertEncodedB.
This property is not available at design time.
Data Type
Binary String
SSLCertEffectiveDate Property (OAuth Control)
This is the date on which this certificate becomes valid.
Syntax
oauthcontrol.SSLCertEffectiveDate
Default Value
""
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
Data Type
String
SSLCertExpirationDate Property (OAuth Control)
This is the date the certificate expires.
Syntax
oauthcontrol.SSLCertExpirationDate
Default Value
""
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
Data Type
String
SSLCertExtendedKeyUsage Property (OAuth Control)
This is a comma-delimited list of extended key usage identifiers.
Syntax
oauthcontrol.SSLCertExtendedKeyUsage
Default Value
""
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
Data Type
String
SSLCertFingerprint Property (OAuth Control)
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Syntax
oauthcontrol.SSLCertFingerprint
Default Value
""
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
Data Type
String
SSLCertFingerprintSHA1 Property (OAuth Control)
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Syntax
oauthcontrol.SSLCertFingerprintSHA1
Default Value
""
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
Data Type
String
SSLCertFingerprintSHA256 Property (OAuth Control)
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Syntax
oauthcontrol.SSLCertFingerprintSHA256
Default Value
""
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
Data Type
String
SSLCertIssuer Property (OAuth Control)
This is the issuer of the certificate.
Syntax
oauthcontrol.SSLCertIssuer
Default Value
""
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
Data Type
String
SSLCertPrivateKey Property (OAuth Control)
This is the private key of the certificate (if available).
Syntax
oauthcontrol.SSLCertPrivateKey
Default Value
""
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.
This property is read-only.
Data Type
String
SSLCertPrivateKeyAvailable Property (OAuth Control)
This property shows whether a PrivateKey is available for the selected certificate.
Syntax
oauthcontrol.SSLCertPrivateKeyAvailable
Default Value
False
Remarks
This property shows whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
Data Type
Boolean
SSLCertPrivateKeyContainer Property (OAuth Control)
This is the name of the PrivateKey container for the certificate (if available).
Syntax
oauthcontrol.SSLCertPrivateKeyContainer
Default Value
""
Remarks
This is the name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
Data Type
String
SSLCertPublicKey Property (OAuth Control)
This is the public key of the certificate.
Syntax
oauthcontrol.SSLCertPublicKey
Default Value
""
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
Data Type
String
SSLCertPublicKeyAlgorithm Property (OAuth Control)
This property contains the textual description of the certificate's public key algorithm.
Syntax
oauthcontrol.SSLCertPublicKeyAlgorithm
Default Value
""
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLCertPublicKeyLength Property (OAuth Control)
This is the length of the certificate's public key (in bits).
Syntax
oauthcontrol.SSLCertPublicKeyLength
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
Data Type
Integer
SSLCertSerialNumber Property (OAuth Control)
This is the serial number of the certificate encoded as a string.
Syntax
oauthcontrol.SSLCertSerialNumber
Default Value
""
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
Data Type
String
SSLCertSignatureAlgorithm Property (OAuth Control)
The property contains the text description of the certificate's signature algorithm.
Syntax
oauthcontrol.SSLCertSignatureAlgorithm
Default Value
""
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLCertStore Property (OAuth Control)
This is the name of the certificate store for the client certificate.
Syntax
oauthcontrol.SSLCertStore[=string]
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.
SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertStoreB.
Data Type
Binary String
SSLCertStorePassword Property (OAuth Control)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
oauthcontrol.SSLCertStorePassword[=string]
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Data Type
String
SSLCertStoreType Property (OAuth Control)
This is the type of certificate store for this certificate.
Syntax
oauthcontrol.SSLCertStoreType[=integer]
Possible Values
cstUser(0), cstMachine(1), cstPFXFile(2), cstPFXBlob(3), cstJKSFile(4), cstJKSBlob(5), cstPEMKeyFile(6), cstPEMKeyBlob(7), cstPublicKeyFile(8), cstPublicKeyBlob(9), cstSSHPublicKeyBlob(10), cstP7BFile(11), cstP7BBlob(12), cstSSHPublicKeyFile(13), cstPPKFile(14), cstPPKBlob(15), cstXMLFile(16), cstXMLBlob(17), cstJWKFile(18), cstJWKBlob(19), cstSecurityKey(20), cstBCFKSFile(21), cstBCFKSBlob(22), cstPKCS11(23), cstAuto(99)
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: This store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr control. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLCertStore and set SSLCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
Data Type
Integer
SSLCertSubjectAltNames Property (OAuth Control)
This property contains comma-separated lists of alternative subject names for the certificate.
Syntax
oauthcontrol.SSLCertSubjectAltNames
Default Value
""
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
Data Type
String
SSLCertThumbprintMD5 Property (OAuth Control)
This property contains the MD5 hash of the certificate.
Syntax
oauthcontrol.SSLCertThumbprintMD5
Default Value
""
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLCertThumbprintSHA1 Property (OAuth Control)
This property contains the SHA-1 hash of the certificate.
Syntax
oauthcontrol.SSLCertThumbprintSHA1
Default Value
""
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLCertThumbprintSHA256 Property (OAuth Control)
This property contains the SHA-256 hash of the certificate.
Syntax
oauthcontrol.SSLCertThumbprintSHA256
Default Value
""
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLCertUsage Property (OAuth Control)
This property contains the text description of UsageFlags .
Syntax
oauthcontrol.SSLCertUsage
Default Value
""
Remarks
This property contains the text description of SSLCertUsageFlags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
Data Type
String
SSLCertUsageFlags Property (OAuth Control)
This property contains the flags that show intended use for the certificate.
Syntax
oauthcontrol.SSLCertUsageFlags
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
Data Type
Integer
SSLCertVersion Property (OAuth Control)
This property contains the certificate's version number.
Syntax
oauthcontrol.SSLCertVersion
Default Value
""
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
Data Type
String
SSLCertSubject Property (OAuth Control)
This is the subject of the certificate used for client authentication.
Syntax
oauthcontrol.SSLCertSubject[=string]
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
Data Type
String
SSLCertEncoded Property (OAuth Control)
This is the certificate (PEM/Base64 encoded).
Syntax
oauthcontrol.SSLCertEncoded[=string]
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.
When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.
To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLCertEncodedB.
This property is not available at design time.
Data Type
Binary String
SSLProvider Property (OAuth Control)
This property specifies the Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.
Syntax
oauthcontrol.SSLProvider[=integer]
Possible Values
sslpAutomatic(0), sslpPlatform(1), sslpInternal(2)
Default Value
0
Remarks
This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the control will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.
Possible values are as follows:
0 (sslpAutomatic - default) | Automatically selects the appropriate implementation. |
1 (sslpPlatform) | Uses the platform/system implementation. |
2 (sslpInternal) | Uses the internal implementation. |
In most cases using the default value (Automatic) is recommended. The control will select a provider depending on the current platform.
When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.
Data Type
Integer
SSLServerCertEffectiveDate Property (OAuth Control)
This is the date on which this certificate becomes valid.
Syntax
oauthcontrol.SSLServerCertEffectiveDate
Default Value
""
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
Data Type
String
SSLServerCertExpirationDate Property (OAuth Control)
This is the date the certificate expires.
Syntax
oauthcontrol.SSLServerCertExpirationDate
Default Value
""
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
Data Type
String
SSLServerCertExtendedKeyUsage Property (OAuth Control)
This is a comma-delimited list of extended key usage identifiers.
Syntax
oauthcontrol.SSLServerCertExtendedKeyUsage
Default Value
""
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
Data Type
String
SSLServerCertFingerprint Property (OAuth Control)
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Syntax
oauthcontrol.SSLServerCertFingerprint
Default Value
""
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
Data Type
String
SSLServerCertFingerprintSHA1 Property (OAuth Control)
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Syntax
oauthcontrol.SSLServerCertFingerprintSHA1
Default Value
""
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
Data Type
String
SSLServerCertFingerprintSHA256 Property (OAuth Control)
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Syntax
oauthcontrol.SSLServerCertFingerprintSHA256
Default Value
""
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
Data Type
String
SSLServerCertIssuer Property (OAuth Control)
This is the issuer of the certificate.
Syntax
oauthcontrol.SSLServerCertIssuer
Default Value
""
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
Data Type
String
SSLServerCertPrivateKey Property (OAuth Control)
This is the private key of the certificate (if available).
Syntax
oauthcontrol.SSLServerCertPrivateKey
Default Value
""
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.
This property is read-only.
Data Type
String
SSLServerCertPrivateKeyAvailable Property (OAuth Control)
This property shows whether a PrivateKey is available for the selected certificate.
Syntax
oauthcontrol.SSLServerCertPrivateKeyAvailable
Default Value
False
Remarks
This property shows whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
Data Type
Boolean
SSLServerCertPrivateKeyContainer Property (OAuth Control)
This is the name of the PrivateKey container for the certificate (if available).
Syntax
oauthcontrol.SSLServerCertPrivateKeyContainer
Default Value
""
Remarks
This is the name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
Data Type
String
SSLServerCertPublicKey Property (OAuth Control)
This is the public key of the certificate.
Syntax
oauthcontrol.SSLServerCertPublicKey
Default Value
""
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
Data Type
String
SSLServerCertPublicKeyAlgorithm Property (OAuth Control)
This property contains the textual description of the certificate's public key algorithm.
Syntax
oauthcontrol.SSLServerCertPublicKeyAlgorithm
Default Value
""
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLServerCertPublicKeyLength Property (OAuth Control)
This is the length of the certificate's public key (in bits).
Syntax
oauthcontrol.SSLServerCertPublicKeyLength
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
Data Type
Integer
SSLServerCertSerialNumber Property (OAuth Control)
This is the serial number of the certificate encoded as a string.
Syntax
oauthcontrol.SSLServerCertSerialNumber
Default Value
""
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
Data Type
String
SSLServerCertSignatureAlgorithm Property (OAuth Control)
The property contains the text description of the certificate's signature algorithm.
Syntax
oauthcontrol.SSLServerCertSignatureAlgorithm
Default Value
""
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
SSLServerCertStore Property (OAuth Control)
This is the name of the certificate store for the client certificate.
Syntax
oauthcontrol.SSLServerCertStore
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password protected, specify the password in SSLServerCertStorePassword.
SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertStoreB.
This property is read-only.
Data Type
Binary String
SSLServerCertStorePassword Property (OAuth Control)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
oauthcontrol.SSLServerCertStorePassword
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
This property is read-only.
Data Type
String
SSLServerCertStoreType Property (OAuth Control)
This is the type of certificate store for this certificate.
Syntax
oauthcontrol.SSLServerCertStoreType
Possible Values
cstUser(0), cstMachine(1), cstPFXFile(2), cstPFXBlob(3), cstJKSFile(4), cstJKSBlob(5), cstPEMKeyFile(6), cstPEMKeyBlob(7), cstPublicKeyFile(8), cstPublicKeyBlob(9), cstSSHPublicKeyBlob(10), cstP7BFile(11), cstP7BBlob(12), cstSSHPublicKeyFile(13), cstPPKFile(14), cstPPKBlob(15), cstXMLFile(16), cstXMLBlob(17), cstJWKFile(18), cstJWKBlob(19), cstSecurityKey(20), cstBCFKSFile(21), cstBCFKSBlob(22), cstPKCS11(23), cstAuto(99)
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: This store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr control. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the SSLServerCertStore and set SSLServerCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
This property is read-only.
Data Type
Integer
SSLServerCertSubjectAltNames Property (OAuth Control)
This property contains comma-separated lists of alternative subject names for the certificate.
Syntax
oauthcontrol.SSLServerCertSubjectAltNames
Default Value
""
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
Data Type
String
SSLServerCertThumbprintMD5 Property (OAuth Control)
This property contains the MD5 hash of the certificate.
Syntax
oauthcontrol.SSLServerCertThumbprintMD5
Default Value
""
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLServerCertThumbprintSHA1 Property (OAuth Control)
This property contains the SHA-1 hash of the certificate.
Syntax
oauthcontrol.SSLServerCertThumbprintSHA1
Default Value
""
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLServerCertThumbprintSHA256 Property (OAuth Control)
This property contains the SHA-256 hash of the certificate.
Syntax
oauthcontrol.SSLServerCertThumbprintSHA256
Default Value
""
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
SSLServerCertUsage Property (OAuth Control)
This property contains the text description of UsageFlags .
Syntax
oauthcontrol.SSLServerCertUsage
Default Value
""
Remarks
This property contains the text description of SSLServerCertUsageFlags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
Data Type
String
SSLServerCertUsageFlags Property (OAuth Control)
This property contains the flags that show intended use for the certificate.
Syntax
oauthcontrol.SSLServerCertUsageFlags
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
Data Type
Integer
SSLServerCertVersion Property (OAuth Control)
This property contains the certificate's version number.
Syntax
oauthcontrol.SSLServerCertVersion
Default Value
""
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
Data Type
String
SSLServerCertSubject Property (OAuth Control)
This is the subject of the certificate used for client authentication.
Syntax
oauthcontrol.SSLServerCertSubject
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
This property is read-only.
Data Type
String
SSLServerCertEncoded Property (OAuth Control)
This is the certificate (PEM/Base64 encoded).
Syntax
oauthcontrol.SSLServerCertEncoded
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.
When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.
To read or write binary data to the property, a Variant (Byte Array) version is provided in .SSLServerCertEncodedB.
This property is read-only and not available at design time.
Data Type
Binary String
Timeout Property (OAuth Control)
This property includes the timeout for the control.
Syntax
oauthcontrol.Timeout[=integer]
Default Value
60
Remarks
If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.
If Timeout is set to a positive value, the control will wait for the operation to complete before returning control.
The control will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.
If Timeout expires, and the operation is not yet complete, the control fails with an error.
Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.
The default value for the Timeout property is 60 seconds.
Data Type
Integer
TransferredData Property (OAuth Control)
The contents of the last response from the server.
Syntax
oauthcontrol.TransferredData
Default Value
""
Remarks
This property contains the contents of the last response from the server.
TransferredDataLimit controls the maximum amount of data accumulated in TransferredData (by default, there is no limit).
To read or write binary data to the property, a Variant (Byte Array) version is provided in .TransferredDataB.
This property is read-only and not available at design time.
Data Type
Binary String
TransferredHeaders Property (OAuth Control)
This property includes the full set of headers as received from the server.
Syntax
oauthcontrol.TransferredHeaders
Default Value
""
Remarks
This property returns the complete set of raw headers as received from the server.
The Header event shows the individual headers as parsed by the control.
This property is read-only and not available at design time.
Data Type
String
UsePKCE Property (OAuth Control)
Whether Proof Key for Code Exchange (PKCE) should be used.
Syntax
oauthcontrol.UsePKCE[=boolean]
Default Value
False
Remarks
If specified, Proof Key for Code Exchange (PKCE) defined by RFC 7636 will be used when GetAuthorization is called. This applies when using the Authorization Code GrantType. The PKCEChallengeEncoding configuration setting can be used to control the code challenge method that will be used. When using the ocpWeb ClientProfile, the PKCEVerifier configuration setting can be used to get/set the verifier that was used to generate the challenge. See the PKCEVerifier documentation for more information.
Data Type
Boolean
WebServerPort Property (OAuth Control)
The local port on which the embedded web server listens.
Syntax
oauthcontrol.WebServerPort[=integer]
Default Value
0
Remarks
This property specifies the port on which the embedded web server listens. Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be returned when this setting is queried after the server has started listening. This is applicable only when using the embedded web server.
Data Type
Integer
WebServerSSLCertEffectiveDate Property (OAuth Control)
This is the date on which this certificate becomes valid.
Syntax
oauthcontrol.WebServerSSLCertEffectiveDate
Default Value
""
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
Data Type
String
WebServerSSLCertExpirationDate Property (OAuth Control)
This is the date the certificate expires.
Syntax
oauthcontrol.WebServerSSLCertExpirationDate
Default Value
""
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
Data Type
String
WebServerSSLCertExtendedKeyUsage Property (OAuth Control)
This is a comma-delimited list of extended key usage identifiers.
Syntax
oauthcontrol.WebServerSSLCertExtendedKeyUsage
Default Value
""
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
Data Type
String
WebServerSSLCertFingerprint Property (OAuth Control)
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Syntax
oauthcontrol.WebServerSSLCertFingerprint
Default Value
""
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
Data Type
String
WebServerSSLCertFingerprintSHA1 Property (OAuth Control)
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Syntax
oauthcontrol.WebServerSSLCertFingerprintSHA1
Default Value
""
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
Data Type
String
WebServerSSLCertFingerprintSHA256 Property (OAuth Control)
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Syntax
oauthcontrol.WebServerSSLCertFingerprintSHA256
Default Value
""
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
Data Type
String
WebServerSSLCertIssuer Property (OAuth Control)
This is the issuer of the certificate.
Syntax
oauthcontrol.WebServerSSLCertIssuer
Default Value
""
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
Data Type
String
WebServerSSLCertPrivateKey Property (OAuth Control)
This is the private key of the certificate (if available).
Syntax
oauthcontrol.WebServerSSLCertPrivateKey
Default Value
""
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The WebServerSSLCertPrivateKey may be available but not exportable. In this case, WebServerSSLCertPrivateKey returns an empty string.
This property is read-only.
Data Type
String
WebServerSSLCertPrivateKeyAvailable Property (OAuth Control)
This property shows whether a PrivateKey is available for the selected certificate.
Syntax
oauthcontrol.WebServerSSLCertPrivateKeyAvailable
Default Value
False
Remarks
This property shows whether a WebServerSSLCertPrivateKey is available for the selected certificate. If WebServerSSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
Data Type
Boolean
WebServerSSLCertPrivateKeyContainer Property (OAuth Control)
This is the name of the PrivateKey container for the certificate (if available).
Syntax
oauthcontrol.WebServerSSLCertPrivateKeyContainer
Default Value
""
Remarks
This is the name of the WebServerSSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
Data Type
String
WebServerSSLCertPublicKey Property (OAuth Control)
This is the public key of the certificate.
Syntax
oauthcontrol.WebServerSSLCertPublicKey
Default Value
""
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
Data Type
String
WebServerSSLCertPublicKeyAlgorithm Property (OAuth Control)
This property contains the textual description of the certificate's public key algorithm.
Syntax
oauthcontrol.WebServerSSLCertPublicKeyAlgorithm
Default Value
""
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
WebServerSSLCertPublicKeyLength Property (OAuth Control)
This is the length of the certificate's public key (in bits).
Syntax
oauthcontrol.WebServerSSLCertPublicKeyLength
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
Data Type
Integer
WebServerSSLCertSerialNumber Property (OAuth Control)
This is the serial number of the certificate encoded as a string.
Syntax
oauthcontrol.WebServerSSLCertSerialNumber
Default Value
""
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
Data Type
String
WebServerSSLCertSignatureAlgorithm Property (OAuth Control)
The property contains the text description of the certificate's signature algorithm.
Syntax
oauthcontrol.WebServerSSLCertSignatureAlgorithm
Default Value
""
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
Data Type
String
WebServerSSLCertStore Property (OAuth Control)
This is the name of the certificate store for the client certificate.
Syntax
oauthcontrol.WebServerSSLCertStore[=string]
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The WebServerSSLCertStoreType property denotes the type of the certificate store specified by WebServerSSLCertStore. If the store is password protected, specify the password in WebServerSSLCertStorePassword.
WebServerSSLCertStore is used in conjunction with the WebServerSSLCertSubject property to specify client certificates. If WebServerSSLCertStore has a value, and WebServerSSLCertSubject or WebServerSSLCertEncoded is set, a search for a certificate is initiated. Please see the WebServerSSLCertSubject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
To read or write binary data to the property, a Variant (Byte Array) version is provided in .WebServerSSLCertStoreB.
Data Type
Binary String
WebServerSSLCertStorePassword Property (OAuth Control)
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
oauthcontrol.WebServerSSLCertStorePassword[=string]
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Data Type
String
WebServerSSLCertStoreType Property (OAuth Control)
This is the type of certificate store for this certificate.
Syntax
oauthcontrol.WebServerSSLCertStoreType[=integer]
Possible Values
cstUser(0), cstMachine(1), cstPFXFile(2), cstPFXBlob(3), cstJKSFile(4), cstJKSBlob(5), cstPEMKeyFile(6), cstPEMKeyBlob(7), cstPublicKeyFile(8), cstPublicKeyBlob(9), cstSSHPublicKeyBlob(10), cstP7BFile(11), cstP7BBlob(12), cstSSHPublicKeyFile(13), cstPPKFile(14), cstPPKBlob(15), cstXMLFile(16), cstXMLBlob(17), cstJWKFile(18), cstJWKBlob(19), cstSecurityKey(20), cstBCFKSFile(21), cstBCFKSBlob(22), cstPKCS11(23), cstAuto(99)
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The control supports both public and private keys in a variety of formats. When the cstAuto value is used, the control will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: This store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr control. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the WebServerSSLCertStore and set WebServerSSLCertStorePassword to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
Data Type
Integer
WebServerSSLCertSubjectAltNames Property (OAuth Control)
This property contains comma-separated lists of alternative subject names for the certificate.
Syntax
oauthcontrol.WebServerSSLCertSubjectAltNames
Default Value
""
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
Data Type
String
WebServerSSLCertThumbprintMD5 Property (OAuth Control)
This property contains the MD5 hash of the certificate.
Syntax
oauthcontrol.WebServerSSLCertThumbprintMD5
Default Value
""
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
WebServerSSLCertThumbprintSHA1 Property (OAuth Control)
This property contains the SHA-1 hash of the certificate.
Syntax
oauthcontrol.WebServerSSLCertThumbprintSHA1
Default Value
""
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
WebServerSSLCertThumbprintSHA256 Property (OAuth Control)
This property contains the SHA-256 hash of the certificate.
Syntax
oauthcontrol.WebServerSSLCertThumbprintSHA256
Default Value
""
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
Data Type
String
WebServerSSLCertUsage Property (OAuth Control)
This property contains the text description of UsageFlags .
Syntax
oauthcontrol.WebServerSSLCertUsage
Default Value
""
Remarks
This property contains the text description of WebServerSSLCertUsageFlags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
Data Type
String
WebServerSSLCertUsageFlags Property (OAuth Control)
This property contains the flags that show intended use for the certificate.
Syntax
oauthcontrol.WebServerSSLCertUsageFlags
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of WebServerSSLCertUsageFlags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the WebServerSSLCertUsage property for a text representation of WebServerSSLCertUsageFlags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
Data Type
Integer
WebServerSSLCertVersion Property (OAuth Control)
This property contains the certificate's version number.
Syntax
oauthcontrol.WebServerSSLCertVersion
Default Value
""
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
Data Type
String
WebServerSSLCertSubject Property (OAuth Control)
This is the subject of the certificate used for client authentication.
Syntax
oauthcontrol.WebServerSSLCertSubject[=string]
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
Data Type
String
WebServerSSLCertEncoded Property (OAuth Control)
This is the certificate (PEM/Base64 encoded).
Syntax
oauthcontrol.WebServerSSLCertEncoded[=string]
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The WebServerSSLCertStore and WebServerSSLCertSubject properties also may be used to specify a certificate.
When WebServerSSLCertEncoded is set, a search is initiated in the current WebServerSSLCertStore for the private key of the certificate. If the key is found, WebServerSSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, WebServerSSLCertSubject is set to an empty string.
To read or write binary data to the property, a Variant (Byte Array) version is provided in .WebServerSSLCertEncodedB.
This property is not available at design time.
Data Type
Binary String
WebServerSSLEnabled Property (OAuth Control)
Whether the web server requires Secure Sockets Layer (SSL) connections.
Syntax
oauthcontrol.WebServerSSLEnabled[=boolean]
Default Value
False
Remarks
This setting specifies whether the embedded web server uses a Secure Sockets Layer (SSL). If set to True, WebServerSSLCert is required and the server will accept only SSL connections. If set to False, only plaintext connects are supported.
Data Type
Boolean
AddCookie Method (OAuth Control)
This method adds a cookie and the corresponding value to the outgoing request headers.
Syntax
oauthcontrol.AddCookie CookieName, CookieValue
Remarks
This property adds a cookie and the corresponding value to the outgoing request headers. Please refer to the Cookies property for more information on cookies and how they are managed.
AddParam Method (OAuth Control)
Adds a name-value pair to the query string parameters of the outgoing request.
Syntax
oauthcontrol.AddParam ParamName, ParamValue
Remarks
This method can be used to add query string parameters to the outgoing request. One common use for this method would be to add the state parameter to the request, which can be used when the ClientProfile is ocpWeb to add user-defined data. The authorization server will include the state parameter in the response and will be available in the post back to your server, which will allow you to maintain state in your application.
Config Method (OAuth Control)
Sets or retrieves a configuration setting.
Syntax
oauthcontrol.Config ConfigurationString
Remarks
Config is a generic method available in every control. It is used to set and retrieve configuration settings for the control.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
DoEvents Method (OAuth Control)
This method processes events from the internal message queue.
Syntax
oauthcontrol.DoEvents
Remarks
When DoEvents is called, the control processes any available events. If no events are available, it waits for a preset period of time, and then returns.
GetAuthorization Method (OAuth Control)
Gets the authorization string required to access the protected resource.
Syntax
oauthcontrol.GetAuthorization
Remarks
This method performs several operations automatically depending on the value of ClientProfile. Please see the introduction section for the OAuth control for a detailed overview of the typical scenarios.
After authorization is completed, this method will return the authorization string, which can be passed directly to the authorization property of any other component. This can also be passed as the value of the HTTP authorization header to other implementations that access the protected resource as well.
The AccessToken property should be cleared before calling this method.
GetAuthorizationURL Method (OAuth Control)
Builds and returns the URL to which the user should be redirected for authorization.
Syntax
oauthcontrol.GetAuthorizationURL
Remarks
When this method is called, the control will return the URL used for authorization. The control will not make any connections, but instead it will return the URL to you so that you may redirect the user to this location. This is useful when ClientProfile is set to ocpWeb. Before calling this method, set the following:
GetParam Method (OAuth Control)
Gets a specific parameter from a query string.
Syntax
oauthcontrol.GetParam ParamName
Remarks
This method can be used to get a specific parameter from a query string.
For example, when using the ocpApplication profile, this method can be used in the ReturnURL event to query the parameters that are returned from the authorization server. Then, it can be called after GetAuthorization completes to query the parameters that the token server responded with.
string authorizationString = oauth.GetAuthorization();
string stateValue = oauth.GetParam("state");
Interrupt Method (OAuth Control)
This method interrupts the current method.
Syntax
oauthcontrol.Interrupt
Remarks
If there is no method in progress, Interrupt simply returns, doing nothing.
Reset Method (OAuth Control)
This method will reset the control.
Syntax
oauthcontrol.Reset
Remarks
This method will reset the control's properties to their default values.
StartWebServer Method (OAuth Control)
Starts the embedded web server.
Syntax
oauthcontrol.StartWebServer
Remarks
This method starts the embedded web server. This method can be used to manually start the embedded web server. Under normal circumstances, this is not needed as the component will automatically start and stop the web server when GetAuthorization is called. You may decide, however, to start the web server manually before calling GetAuthorization. When called, this method will also populate ReturnURL with the address of the embedded server.
StopWebServer Method (OAuth Control)
Stops the embedded web server.
Syntax
oauthcontrol.StopWebServer
Remarks
This method stops the embedded web server. Under normal circumstances, the web server will be stopped automatically during the authorization process when GetAuthorization is called. If ReUseWebServer is set to True, the server will not be automatically stopped, and this method must be called to stop the embedded web server.
Connected Event (OAuth Control)
This event is fired immediately after a connection completes (or fails).
Syntax
Sub oauthcontrol_Connected(StatusCode As Integer, Description As String)
Remarks
If the connection is made normally, StatusCode is 0 and Description is "OK".
If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error. The corresponding Visual Basic error code can be obtained by adding 15001 to this value.
Please refer to the Error Codes section for more information.
ConnectionStatus Event (OAuth Control)
This event is fired to indicate changes in the connection state.
Syntax
Sub oauthcontrol_ConnectionStatus(ConnectionEvent As String, StatusCode As Integer, Description As String)
Remarks
The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.
The ConnectionEvent parameter indicates the type of connection event. Values may include the following:
Firewall connection complete. | |
Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable). | |
Remote host connection complete. | |
Remote host disconnected. | |
SSL or S/Shell connection broken. | |
Firewall host disconnected. |
Disconnected Event (OAuth Control)
This event is fired when a connection is closed.
Syntax
Sub oauthcontrol_Disconnected(StatusCode As Integer, Description As String)
Remarks
If the connection is broken normally, StatusCode is 0 and Description is "OK".
If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error. The corresponding Visual Basic error code can be obtained by adding 15001 to this value.
Please refer to the Error Codes section for more information.
EndTransfer Event (OAuth Control)
This event is fired when a document finishes transferring.
Syntax
Sub oauthcontrol_EndTransfer(Direction As Integer)
Remarks
The EndTransfer event is fired first when the client finishes sending data to the server (in a POST or PUT request) and then when the document text finishes transferring from the server to the local host.
The Direction parameter shows whether the client (0) or the server (1) is sending the data.
Error Event (OAuth Control)
Fired when information is available about errors during data delivery.
Syntax
Sub oauthcontrol_Error(ErrorCode As Integer, Description As String)
Remarks
The Error event is fired in case of exceptional conditions during message processing. Normally the control fails with an error.
The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.
Header Event (OAuth Control)
This event is fired every time a header line comes in.
Syntax
Sub oauthcontrol_Header(Field As String, Value As String)
Remarks
The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.
If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).
LaunchBrowser Event (OAuth Control)
Fires before launching a browser with the authorization URL.
Syntax
Sub oauthcontrol_LaunchBrowser(URL As String, Command As String)
Remarks
When the ClientProfile property is set to ocpApplication and GetAuthorization is called, the control will fire this event with the Command, which will be executed by the control. The URL parameter will be the authorization URL that the user will be directed to authenticate.
Within this event, you may override the current value of either Command or URL and provide your own value. If Command is set to an empty string, the control will not attempt to launch the browser and instead you will be responsible for directing the user to the authorization URL specified by the URL parameter.
In Windows, ShellExecute is used to execute Command, which limits the verbs available for use in Command to:
- edit
- explore
- find
- open
Log Event (OAuth Control)
This event fires once for each log message.
Syntax
Sub oauthcontrol_Log(LogLevel As Integer, Message As String, LogType As String)
Remarks
This event fires once for each log message generated by the control. The verbosity is controlled by the LogLevel setting.
LogLevel indicates the level of message. Possible values are as follows:
0 (None) | No events are logged. |
1 (Info - default) | Informational events are logged. |
2 (Verbose) | Detailed data are logged. |
3 (Debug) | Debug data are logged. |
The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.
The value 2 (Verbose) logs additional information about the request and response.
The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).
Message is the log entry.
LogType identifies the type of log entry. Possible values are as follows:
- "Info"
- "RequestHeaders"
- "ResponseHeaders"
- "RequestBody"
- "ResponseBody"
- "ProxyRequest"
- "ProxyResponse"
- "FirewallRequest"
- "FirewallResponse"
Redirect Event (OAuth Control)
This event is fired when a redirection is received from the server.
Syntax
Sub oauthcontrol_Redirect(Location As String, Accept As Boolean)
Remarks
This event is fired in cases in which the client can decide whether or not to continue with the redirection process. The Accept parameter is always True by default, but if you do not want to follow the redirection, Accept may be set to False, in which case the control fails with an error. Location is the location to which the client is being redirected. Further control over redirection is provided in the FollowRedirects property.
ReturnURL Event (OAuth Control)
Fired when the user is redirected to the embedded web server.
Syntax
Sub oauthcontrol_ReturnURL(URLPath As String, QueryString As String, ResponseHeaders As String, ResponseBody As String)
Remarks
When ClientProfile is set to ocpApplication and the embedded web server is used (default), this event will fire when the user is redirected from the authorization server back to the local embedded web server. The event provides an opportunity to set the ResponseHeaders and ResponseBody and to provide a custom response that the user will see in their browser.
URLPath and QueryString are informational parameters that show the values sent by the authorization server.
Additionally, the Params properties will be populated. This allows the GetParam method to be used to get a specific parameter returned from the authorization server when used within this event.
SetCookie Event (OAuth Control)
This event is fired for every cookie set by the server.
Syntax
Sub oauthcontrol_SetCookie(Name As String, Value As String, Expires As String, Domain As String, Path As String, Secure As Boolean)
Remarks
The SetCookie event is fired for every Set-Cookie: header received from the HTTP server.
The Name parameter contains the name of the cookie, with the corresponding value supplied in the Value parameter.
The Expires parameter contains an expiration time for the cookie (if provided by the server). The time format used is "Weekday, DD-Mon-YY HH:MM:SS GMT". If the server does not provide an expiration time, the Expires parameter will be an empty string. In this case, the convention is to drop the cookie at the end of the session.
The Domain parameter contains a domain name to limit the cookie to (if provided by the server). If the server does not provide a domain name, the Domain parameter will be an empty string. The convention in this case is to use the server specified in the URL (URLServer) as the cookie domain.
The Path parameter contains a path name to limit the cookie to (if provided by the server). If the server does not provide a cookie path, the Path parameter will be an empty string. The convention in this case is to use the path specified in the URL (URLPath) as the cookie path.
The Secure parameter specifies whether the cookie is secure. If the value of this parameter is True, the cookie value must be submitted only through a secure (HTTPS) connection.
SSLServerAuthentication Event (OAuth Control)
Fired after the server presents its certificate to the client.
Syntax
Sub oauthcontrol_SSLServerAuthentication(CertEncoded As String, CertSubject As String, CertIssuer As String, Status As String, Accept As Boolean)
Remarks
During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.
When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.
SSLStatus Event (OAuth Control)
Fired when secure connection progress messages are available.
Syntax
Sub oauthcontrol_SSLStatus(Message As String)
Remarks
The event is fired for informational and logging purposes only. This event tracks the progress of the connection.
StartTransfer Event (OAuth Control)
This event is fired when a document starts transferring (after the headers).
Syntax
Sub oauthcontrol_StartTransfer(Direction As Integer)
Remarks
The StartTransfer event is fired first when the client starts sending data to the server (in a POST or PUT request) and then when the document text starts transferring from the server to the local host.
The Direction parameter shows whether the client (0) or the server (1) is sending the data.
Status Event (OAuth Control)
This event is fired when the HTTP status line is received from the server.
Syntax
Sub oauthcontrol_Status(HTTPVersion As String, StatusCode As Integer, Description As String)
Remarks
HTTPVersion is a string containing the HTTP version string as returned from the server (e.g., "1.1").
StatusCode contains the HTTP status code (e.g., 200), and Description the associated message returned by the server (e.g., "OK").
Transfer Event (OAuth Control)
This event is fired while a document transfers (delivers document).
Syntax
Sub oauthcontrol_Transfer(Direction As Integer, BytesTransferred As Long64, PercentDone As Integer, Text As String)
Remarks
The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.
The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).
The Direction parameter shows whether the client (0) or the server (1) is sending the data.
The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.
Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.
Config Settings (OAuth Control)
The control accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the control, access to these internal properties is provided through the Config method.OAuth Config Settings
Bearer (default) | When the access token returned by the server is a Bearer type, the authorization string returned by GetAuthorization will be in the format "Bearer access_token". This can be supplied as the value of the HTTP authorization header. |
component.Config("FormVarCount=2");
component.Config("FormVarName[0]=myvar");
component.Config("FormVarValue[0]=myvalue");
component.Config("FormVarName[1]=testname");
component.Config("FormVarValue[1]=testvalue");
The value will be URL encoded by the control
If set to True (default), the redirect_uri will be sent in all cases. If set to False, the redirect_uri will be sent only if it has a value.
The JWTCertStoreType field specifies the type of certificate store specified by JWTCertStore. If the store is password protected, specify the password in JWTCertStorePassword.
JWTCertStore is used in conjunction with the JWTCertSubject field to specify the JWT signing certificate.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
Note: This is required when ClientProfile is set to ocpJWT.
Note: This is applicable only when ClientProfile is set to ocpJWT.
0 | User - This is the default for Windows. This specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java. |
1 | Machine - For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java. |
2 | PFXFile - The certificate store is the name of a PFX (PKCS12) file containing certificates. |
3 | PFXBlob - The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS12) format. |
4 | JKSFile - The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is available only in Java. |
5 | JKSBlob - The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: This store type is available only in Java. |
6 | PEMKeyFile - The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 | PEMKeyBlob - The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
14 | PPKFile - The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 | PPKBlob - The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 | XMLFile - The certificate store is the name of a file that contains a certificate in XML format. |
17 | XMLBlob - The certificate store is a string that contains a certificate in XML format. |
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
Note: This is required when ClientProfile is set to ocpJWT.
To parse the payload for specific claims, see JWTXPath.
- 0 (Google - Default)
- 1 (Microsoft)
- RSA-SHA256
Note: This is applicable only when ClientProfile is set to ocpJWT.
The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.
The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.
The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.
The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.
The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.
XPath syntax is available for the payload of JWT based access tokens if available. An XPath is a series of one or more element accessors separated by the / character, for example: /A/B/C/D.
The following are possible values for an element accessor, which operates relative to the current location specified by the XPath accessors which proceed it in the overall XPath string:
Accessor | Description |
name | The first element with a particular name. Can be *. |
[i] | The i-th element. |
name[i] | The i-th element with a particular name. |
[last()] | The last element. |
[last()-i] | The element i before the last element. |
Description | JSON XPath |
Document root | /json |
Specific element | /json/element_one |
Username Claim (Microsoft Specific) | /json/preferred_username |
Registered Application Name Claim (Microsoft Specific) | /json/app_displayname |
This is not an exhaustive list by any means, but should provide a general idea of the possibilities. To get the text of the specified element, see JWTXText.
The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.
The current element is specified in the JWTXPath configuration setting. This configuration setting is read-only.
When GetAuthorization is called, if Office365ServiceAPIVersion and Office365ServiceCapability are specified, the control will attempt to discover the Office 365 services for which the user has access and find a service that matches the requirements specified in Office365ServiceAPIVersion and Office365ServiceCapability. If a service is found, the control will then obtain authorization to access that service. If authorization is successful, Office365ServiceEndpoint will hold the service endpoint URL to which requests should be made.
Example. OneDrive for Business:
oauth.Config("Office365ServiceCapability=MyFiles");
oauth.Config("Office365ServiceAPIVersion=v2.0");
string authString = oauth.GetAuthorization();
string endpointURL = oauth.Config("Office365ServiceEndpoint");
- 1 (Plain)
- 2 (S256/SHA256 - default)
The default value is "localhost".
HTTP Config Settings
When True, the control adds an Accept-Encoding header to the outgoing request. The value for this header can be controlled by the AcceptEncoding configuration setting. The default value for this header is "gzip, deflate".
The default value is True.
If set to True (default), the control will automatically use HTTP/1.1 if the server does not support HTTP/2. If set to False, the control fails with an error if the server does not support HTTP/2.
The default value is True.
This property is provided so that the HTTP control can be extended with other security schemes in addition to the authorization schemes already implemented by the control.
The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".
The default value is False.
If this property is set to 2 (Same Scheme), the new URL is retrieved automatically only if the URL Scheme is the same; otherwise, the control fails with an error.
Note: Following the HTTP specification, unless this option is set to 1 (Always), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.
Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty, unless this property is set to 1 (Always), in which case the same credentials are used to connect to the new server.
A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).
The default value is 0 (Never). In this case, redirects are never followed, and the control fails with an error instead.
Following are the valid options:
- 0 - Never
- 1 - Always
- 2 - Same Scheme
- "1.0"
- "1.1" (default)
- "2.0"
- "3.0"
When using HTTP/2 ("2.0"), additional restrictions apply. Please see the following notes for details.
HTTP/2 Notes
When using HTTP/2, a secure Secure Sockets Layer/Transport Layer Security (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/2 will result in an error.
If the server does not support HTTP/2, the control will automatically use HTTP/1.1 instead. This is done to provide compatibility without the need for any additional settings. To see which version was used, check NegotiatedHTTPVersion after calling a method. The AllowHTTPFallback setting controls whether this behavior is allowed (default) or disallowed.
HTTP/3 Notes
HTTP/3 is supported only in .NET and Java.
When using HTTP/3, a secure (TLS/SSL) connection is required. Attempting to use a plaintext URL with HTTP/3 will result in an error.
The format of the date value for IfModifiedSince is detailed in the HTTP specs. For example:
Sat, 29 Oct 2017 19:43:31 GMT.
The default value for KeepAlive is .
0 (None) | No events are logged. |
1 (Info - default) | Informational events are logged. |
2 (Verbose) | Detailed data are logged. |
3 (Debug) | Debug data are logged. |
The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.
The value 2 (Verbose) logs additional information about the request and response.
The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).
The headers must follow the format "header: value" as described in the HTTP specifications. Header lines should be separated by CRLF (Chr$(13) & Chr$(10)) .
Use this configuration setting with caution. If this configuration setting contains invalid headers, HTTP requests may fail.
This configuration setting is useful for extending the functionality of the control beyond what is provided.
.NET
Http http = new Http();
http.Config("TransferredRequest=on");
http.PostData = "body";
http.Post("http://someserver.com");
Console.WriteLine(http.Config("TransferredRequest"));
C++
HTTP http;
http.Config("TransferredRequest=on");
http.SetPostData("body", 5);
http.Post("http://someserver.com");
printf("%s\r\n", http.Config("TransferredRequest"));
Note: Some servers (such as the ASP.NET Development Server) may not support chunked encoding.
The default value is False and the hostname will always be used exactly as specified. Note: The CodePage setting must be set to a value capable of interpreting the specified host name. For instance, to specify UTF-8, set CodePage to 65001.
When True (default), the control will check for the existence of a Proxy auto-config URL, and if found, will determine the appropriate proxy to use.
Override the default with the name and version of your software.
TCPClient Config Settings
If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.
Note: This setting is provided for use by controls that do not directly expose Firewall properties.
Note: This setting is provided for use by controls that do not directly expose Firewall properties.
Note: This configuration setting is provided for use by controls that do not directly expose Firewall properties.
0 | No firewall (default setting). |
1 | Connect through a tunneling proxy. FirewallPort is set to 80. |
2 | Connect through a SOCKS4 Proxy. FirewallPort is set to 1080. |
3 | Connect through a SOCKS5 Proxy. FirewallPort is set to 1080. |
10 | Connect through a SOCKS4A Proxy. FirewallPort is set to 1080. |
Note: This setting is provided for use by controls that do not directly expose Firewall properties.
Note: This setting is provided for use by controls that do not directly expose Firewall properties.
Note: This value is not applicable in macOS.
In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.
In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.
The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the control returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).
Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.
In multihomed hosts (machines with more than one IP interface), setting LocalHost to the value of an interface will make the control initiate connections (or accept in the case of server controls) only through that interface.
If the control is connected, the LocalHost setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).
Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by LocalPort after the connection is established.
LocalPort cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.
This configuration setting is useful when trying to connect to services that require a trusted port on the client side. An example is the remote shell (rsh) service in UNIX systems.
If an EOL string is found in the input stream before MaxLineLength bytes are received, the DataIn event is fired with the EOL parameter set to True, and the buffer is reset.
If no EOL is found, and MaxLineLength bytes are accumulated in the buffer, the DataIn event is fired with the EOL parameter set to False, and the buffer is reset.
The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.
www.google.com;www.nsoftware.com
Note: This value is not applicable in Java.
By default, this configuration setting is set to False.
0 | IPv4 only |
1 | IPv6 only |
2 | IPv6 with IPv4 fallback |
Socket Config Settings
Note: This option is not valid for User Datagram Protocol (UDP) ports.
Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the control is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.
Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the control is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.
Base Config Settings
The following is a list of valid code page identifiers:
Identifier | Name |
037 | IBM EBCDIC - U.S./Canada |
437 | OEM - United States |
500 | IBM EBCDIC - International |
708 | Arabic - ASMO 708 |
709 | Arabic - ASMO 449+, BCON V4 |
710 | Arabic - Transparent Arabic |
720 | Arabic - Transparent ASMO |
737 | OEM - Greek (formerly 437G) |
775 | OEM - Baltic |
850 | OEM - Multilingual Latin I |
852 | OEM - Latin II |
855 | OEM - Cyrillic (primarily Russian) |
857 | OEM - Turkish |
858 | OEM - Multilingual Latin I + Euro symbol |
860 | OEM - Portuguese |
861 | OEM - Icelandic |
862 | OEM - Hebrew |
863 | OEM - Canadian-French |
864 | OEM - Arabic |
865 | OEM - Nordic |
866 | OEM - Russian |
869 | OEM - Modern Greek |
870 | IBM EBCDIC - Multilingual/ROECE (Latin-2) |
874 | ANSI/OEM - Thai (same as 28605, ISO 8859-15) |
875 | IBM EBCDIC - Modern Greek |
932 | ANSI/OEM - Japanese, Shift-JIS |
936 | ANSI/OEM - Simplified Chinese (PRC, Singapore) |
949 | ANSI/OEM - Korean (Unified Hangul Code) |
950 | ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) |
1026 | IBM EBCDIC - Turkish (Latin-5) |
1047 | IBM EBCDIC - Latin 1/Open System |
1140 | IBM EBCDIC - U.S./Canada (037 + Euro symbol) |
1141 | IBM EBCDIC - Germany (20273 + Euro symbol) |
1142 | IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) |
1143 | IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) |
1144 | IBM EBCDIC - Italy (20280 + Euro symbol) |
1145 | IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) |
1146 | IBM EBCDIC - United Kingdom (20285 + Euro symbol) |
1147 | IBM EBCDIC - France (20297 + Euro symbol) |
1148 | IBM EBCDIC - International (500 + Euro symbol) |
1149 | IBM EBCDIC - Icelandic (20871 + Euro symbol) |
1200 | Unicode UCS-2 Little-Endian (BMP of ISO 10646) |
1201 | Unicode UCS-2 Big-Endian |
1250 | ANSI - Central European |
1251 | ANSI - Cyrillic |
1252 | ANSI - Latin I |
1253 | ANSI - Greek |
1254 | ANSI - Turkish |
1255 | ANSI - Hebrew |
1256 | ANSI - Arabic |
1257 | ANSI - Baltic |
1258 | ANSI/OEM - Vietnamese |
1361 | Korean (Johab) |
10000 | MAC - Roman |
10001 | MAC - Japanese |
10002 | MAC - Traditional Chinese (Big5) |
10003 | MAC - Korean |
10004 | MAC - Arabic |
10005 | MAC - Hebrew |
10006 | MAC - Greek I |
10007 | MAC - Cyrillic |
10008 | MAC - Simplified Chinese (GB 2312) |
10010 | MAC - Romania |
10017 | MAC - Ukraine |
10021 | MAC - Thai |
10029 | MAC - Latin II |
10079 | MAC - Icelandic |
10081 | MAC - Turkish |
10082 | MAC - Croatia |
12000 | Unicode UCS-4 Little-Endian |
12001 | Unicode UCS-4 Big-Endian |
20000 | CNS - Taiwan |
20001 | TCA - Taiwan |
20002 | Eten - Taiwan |
20003 | IBM5550 - Taiwan |
20004 | TeleText - Taiwan |
20005 | Wang - Taiwan |
20105 | IA5 IRV International Alphabet No. 5 (7-bit) |
20106 | IA5 German (7-bit) |
20107 | IA5 Swedish (7-bit) |
20108 | IA5 Norwegian (7-bit) |
20127 | US-ASCII (7-bit) |
20261 | T.61 |
20269 | ISO 6937 Non-Spacing Accent |
20273 | IBM EBCDIC - Germany |
20277 | IBM EBCDIC - Denmark/Norway |
20278 | IBM EBCDIC - Finland/Sweden |
20280 | IBM EBCDIC - Italy |
20284 | IBM EBCDIC - Latin America/Spain |
20285 | IBM EBCDIC - United Kingdom |
20290 | IBM EBCDIC - Japanese Katakana Extended |
20297 | IBM EBCDIC - France |
20420 | IBM EBCDIC - Arabic |
20423 | IBM EBCDIC - Greek |
20424 | IBM EBCDIC - Hebrew |
20833 | IBM EBCDIC - Korean Extended |
20838 | IBM EBCDIC - Thai |
20866 | Russian - KOI8-R |
20871 | IBM EBCDIC - Icelandic |
20880 | IBM EBCDIC - Cyrillic (Russian) |
20905 | IBM EBCDIC - Turkish |
20924 | IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) |
20932 | JIS X 0208-1990 & 0121-1990 |
20936 | Simplified Chinese (GB2312) |
21025 | IBM EBCDIC - Cyrillic (Serbian, Bulgarian) |
21027 | Extended Alpha Lowercase |
21866 | Ukrainian (KOI8-U) |
28591 | ISO 8859-1 Latin I |
28592 | ISO 8859-2 Central Europe |
28593 | ISO 8859-3 Latin 3 |
28594 | ISO 8859-4 Baltic |
28595 | ISO 8859-5 Cyrillic |
28596 | ISO 8859-6 Arabic |
28597 | ISO 8859-7 Greek |
28598 | ISO 8859-8 Hebrew |
28599 | ISO 8859-9 Latin 5 |
28605 | ISO 8859-15 Latin 9 |
29001 | Europa 3 |
38598 | ISO 8859-8 Hebrew |
50220 | ISO 2022 Japanese with no halfwidth Katakana |
50221 | ISO 2022 Japanese with halfwidth Katakana |
50222 | ISO 2022 Japanese JIS X 0201-1989 |
50225 | ISO 2022 Korean |
50227 | ISO 2022 Simplified Chinese |
50229 | ISO 2022 Traditional Chinese |
50930 | Japanese (Katakana) Extended |
50931 | US/Canada and Japanese |
50933 | Korean Extended and Korean |
50935 | Simplified Chinese Extended and Simplified Chinese |
50936 | Simplified Chinese |
50937 | US/Canada and Traditional Chinese |
50939 | Japanese (Latin) Extended and Japanese |
51932 | EUC - Japanese |
51936 | EUC - Simplified Chinese |
51949 | EUC - Korean |
51950 | EUC - Traditional Chinese |
52936 | HZ-GB2312 Simplified Chinese |
54936 | Windows XP: GB18030 Simplified Chinese (4 Byte) |
57002 | ISCII Devanagari |
57003 | ISCII Bengali |
57004 | ISCII Tamil |
57005 | ISCII Telugu |
57006 | ISCII Assamese |
57007 | ISCII Oriya |
57008 | ISCII Kannada |
57009 | ISCII Malayalam |
57010 | ISCII Gujarati |
57011 | ISCII Punjabi |
65000 | Unicode UTF-7 |
65001 | Unicode UTF-8 |
Identifier | Name |
1 | ASCII |
2 | NEXTSTEP |
3 | JapaneseEUC |
4 | UTF8 |
5 | ISOLatin1 |
6 | Symbol |
7 | NonLossyASCII |
8 | ShiftJIS |
9 | ISOLatin2 |
10 | Unicode |
11 | WindowsCP1251 |
12 | WindowsCP1252 |
13 | WindowsCP1253 |
14 | WindowsCP1254 |
15 | WindowsCP1250 |
21 | ISO2022JP |
30 | MacOSRoman |
10 | UTF16String |
0x90000100 | UTF16BigEndian |
0x94000100 | UTF16LittleEndian |
0x8c000100 | UTF32String |
0x98000100 | UTF32BigEndian |
0x9c000100 | UTF32LittleEndian |
65536 | Proprietary |
This setting only works on these controls: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.
Setting this configuration setting to tells the control to use the internal implementation instead of using the system security libraries.
This setting is set to by default on all platforms.
Trappable Errors (OAuth Control)
OAuth Errors
20170 | Invalid parameter index (out of range). |
20802 | No token specified in Token property. |
20803 | No authorization URL specified. |
20804 | No client Id specified in ClientId property. |
20805 | No client secret specified in ClientSecret property. |
20806 | No request token URL specified. |
20807 | Unknown signature method. |
20808 | Invalid URL. |
20809 | Cryptographic error. |
20810 | No verifier specified. |
20811 | No access token URL specified. |
20812 | Protocol error. |
20813 | Invalid OAuth data. |
The control may also return one of the following error codes, which are inherited from other controls.
HTTP Errors
20119 | Firewall Error. Error description contains detailed message. |
20144 | Busy executing current method. |
20152 | HTTP protocol error. The error message has the server response. |
20153 | No server specified in URL |
20154 | Specified URLScheme is invalid. |
20156 | Range operation is not supported by server. |
20157 | Invalid cookie index (out of range). |
20302 | Interrupted. |
20303 | Can't open AttachedFile. |
The control may also return one of the following error codes, which are inherited from other controls.
TCPClient Errors
20101 | You cannot change the RemotePort at this time. A connection is in progress. |
20102 | You cannot change the RemoteHost (Server) at this time. A connection is in progress. |
20103 | The RemoteHost address is invalid (0.0.0.0). |
20105 | Already connected. If you want to reconnect, close the current connection first. |
20107 | You cannot change the LocalPort at this time. A connection is in progress. |
20108 | You cannot change the LocalHost at this time. A connection is in progress. |
20113 | You cannot change MaxLineLength at this time. A connection is in progress. |
20117 | RemotePort cannot be zero. Please specify a valid service port number. |
20118 | You cannot change the UseConnection option while the control is active. |
20136 | Operation would block. |
20202 | Timeout. |
20212 | Action impossible in control's present state. |
20213 | Action impossible while not connected. |
20214 | Action impossible while listening. |
20302 | Timeout. |
20303 | Could not open file. |
20435 | Unable to convert string to selected CodePage. |
21106 | Already connecting. If you want to reconnect, close the current connection first. |
21118 | You need to connect first. |
21120 | You cannot change the LocalHost at this time. A connection is in progress. |
21121 | Connection dropped by remote host. |
TCP/IP Errors
25005 | [10004] Interrupted system call. |
25010 | [10009] Bad file number. |
25014 | [10013] Access denied. |
25015 | [10014] Bad address. |
25023 | [10022] Invalid argument. |
25025 | [10024] Too many open files. |
25036 | [10035] Operation would block. |
25037 | [10036] Operation now in progress. |
25038 | [10037] Operation already in progress. |
25039 | [10038] Socket operation on nonsocket. |
25040 | [10039] Destination address required. |
25041 | [10040] Message is too long. |
25042 | [10041] Protocol wrong type for socket. |
25043 | [10042] Bad protocol option. |
25044 | [10043] Protocol is not supported. |
25045 | [10044] Socket type is not supported. |
25046 | [10045] Operation is not supported on socket. |
25047 | [10046] Protocol family is not supported. |
25048 | [10047] Address family is not supported by protocol family. |
25049 | [10048] Address already in use. |
25050 | [10049] Cannot assign requested address. |
25051 | [10050] Network is down. |
25052 | [10051] Network is unreachable. |
25053 | [10052] Net dropped connection or reset. |
25054 | [10053] Software caused connection abort. |
25055 | [10054] Connection reset by peer. |
25056 | [10055] No buffer space available. |
25057 | [10056] Socket is already connected. |
25058 | [10057] Socket is not connected. |
25059 | [10058] Cannot send after socket shutdown. |
25060 | [10059] Too many references, cannot splice. |
25061 | [10060] Connection timed out. |
25062 | [10061] Connection refused. |
25063 | [10062] Too many levels of symbolic links. |
25064 | [10063] File name is too long. |
25065 | [10064] Host is down. |
25066 | [10065] No route to host. |
25067 | [10066] Directory is not empty |
25068 | [10067] Too many processes. |
25069 | [10068] Too many users. |
25070 | [10069] Disc Quota Exceeded. |
25071 | [10070] Stale NFS file handle. |
25072 | [10071] Too many levels of remote in path. |
25092 | [10091] Network subsystem is unavailable. |
25093 | [10092] WINSOCK DLL Version out of range. |
25094 | [10093] Winsock is not loaded yet. |
26002 | [11001] Host not found. |
26003 | [11002] Nonauthoritative 'Host not found' (try again or check DNS setup). |
26004 | [11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP. |
26005 | [11004] Valid name, no data record (check DNS setup). |