JWT Component

Properties   Methods   Events   Config Settings   Errors  

Create, Sign, Encrypt, Verify and Decrypt JSON Web Tokens (JWTs).

Syntax

TipaJWT

Remarks

The JWT component supports signing, encrypting, decrypting and verifying JSON Web Tokens (JWTs).

Specify a set of claims via the Claim* properties or add your own claims with AddClaim. Call Sign to create a signed JWT using a variety of signing algorithms including HMAC, RSA, and ECDSA. Use Verify to verify the signature of any received JWT. See SigningAlgorithm for more details about supported algorithms.

Use Encrypt to create an encrypted JWT using a variety of algorithms including ECDH, RSA, and AES. Use Decrypt to decrypt the payload of any received JWT. See EncryptionAlgorithm for more details about supported algorithms.

Signing

The Sign method may be used to sign a payload with a variety of algorithms. Before calling the Sign method set SigningAlgorithm to the algorithm which will be used to sign the message. The result of signing is a compact serialized JWT string. For instance:

eyJhbGciOiJIUzI1NiJ9.eyJhdWQiOlsiYXVkaWVuY2UiXSwiaXNzIjoiaXNzdWVyIn0.mlFETSma4WUcUSjNSUWA1n9QBcQHCkHN-y4zeBsCVqI

The component will use the values present in the Claim* properties to build the encoded JWT. After calling this method the EncodedJWT property will hold the compact serialized JWT. The following properties are applicable when calling this method:

Notes for HMAC Algorithms (HS256, HS384, HS512)

When SigningAlgorithm is set to a HMAC algorithm Key must be set to a key of appropriate length for the algorithm. The Key should be the same number of bits as the algorithm being used. For instance a 256 bit key would be used for HS256.

The key must be known by both parties in order for signing and verification to take place. To use an existing HMAC key provide the bytes to the Key property. For instance:

//HMAC SHA-256 Key byte[] key = new byte[] { 170, 171, 221, 209, 7, 181, 48, 178, 48, 118, 242, 132, 36, 218, 74, 140, 216, 165, 161, 70, 11, 42, 246, 205, 235, 231, 19, 48, 87, 141, 122, 10 }; //Sign the payload using HS256 Jwt jwt = new Jwt(); jwt.SigningAlgorithm = JwtSigningAlgorithms.saHS256; jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.KeyB = key; jwt.Sign(); string signedData = jwt.EncodedJWT;

Notes for RSA Algorithms (RS256, RS384, RS512, PS256, PS384, PS512)

The RSA based algorithms use asymmetric encryption. Signing is done with a private key and verification is done with a public key. The private key may be in PFX or PEM format.

Jwt jwt = new Jwt(); jwt.SigningAlgorithm = JwtSigningAlgorithms.saRS256; jwt.Certificate = new Certificate(CertStoreTypes.cstPFXFile, "..\\jwt.pfx", "test", "*"); jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.Sign(); string signedMessage = jwt.EncodedJWT;

Notes for ECDSA Algorithms (ES256, ES384, ES512)

ECDSA algorithms require a valid ECC private key in order to sign data. The Certificate property should be set to a certificate with an ECC key. The CertMgr component can be used to create a certificate with an ECC key.

//Create an ECC key with SHA-256 Certmgr mgr = new Certmgr(); mgr.Config("CertPublicKeyAlgorithm=ECDSA_P256"); mgr.CertStoreType = CertStoreTypes.cstPEMKeyFile; mgr.CertStore = "C:\\temp\\ecdsa.pem"; mgr.CreateCertificate("CN=ecdsa", 123); //Sign the payload using ES256 Jwt jwt = new Jwt(); jwt.SigningAlgorithm = JwtSigningAlgorithms.saES256; jwt.Certificate = new Certificate(CertStoreTypes.cstPEMKeyFile, "C:\\temp\\ecdsa.pem", "", "*"); jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.Sign(); string signedMessage = jwt.EncodedJWT;

Notes for Unsecured (none)

To create a JWS token without any security set SigningAlgorithm to jwtNone.

Jwt jwt = new Jwt(); jwt.SigningAlgorithm = JwtSigningAlgorithms.saNone; jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.Sign(); string unsecuredMessage = jwt.EncodedJWT;

Signature Verification

The Verify method may be used to verify a received JWS message. Before calling the Verify method set EncodedJWT to a valid compact serialized JWT. For instance:

eyJhbGciOiJIUzI1NiJ9.eyJhdWQiOlsiYXVkaWVuY2UiXSwiaXNzIjoiaXNzdWVyIn0.mlFETSma4WUcUSjNSUWA1n9QBcQHCkHN-y4zeBsCVqI

The Key or SignerCert properties should be set to the HMAC key or public certificate respectively. If the correct Key or SignerCert is not known ahead of time the KeyId parameter of the SignerInfo event may be used to identify the correct key.

If this method returns without error verification was successful. If verification fails then this method raises an exception. After calling this method the claims will be parsed and the Claim* properties will be populated. The the HeaderParams property will contain the headers. Headers of the parsed message are also available through the HeaderParam event.

The following properties are applicable when calling this method:

After calling this method the following properties are populated:

Notes for HMAC Algorithms (HS256, HS384, HS512)

When verifying a message originally signed with a HMAC algorithm Key must be set to the same key used during signing. The key must be known by both parties in order for signing and verification to take place.

byte[] key = new byte[] { 170, 171, 221, 209, 7, 181, 48, 178, 48, 118, 242, 132, 36, 218, 74, 140, 216, 165, 161, 70, 11, 42, 246, 205, 235, 231, 19, 48, 87, 141, 122, 10 }; Jwt jwt = new Jwt(); jwt.KeyB = key; jwt.EncodedJWT = signedData; jwt.Verify(); string issuer = jwt.ClaimIssuer;

Notes for RSA Algorithms (RS256, RS384, RS512, PS256, PS384, PS512)

The RSA based algorithms use asymmetric encryption. Signing is done with a private key and verification is done with a public key. The public key is typically in PEM format.

Jwt jwt = new Jwt(); jwt.SignerCert = new Certificate("..\\jwt.cer"); jwt.EncodedJWT = signedData; jwt.Verify(); string issuer = jwt.ClaimIssuer;

Notes for ECDSA Algorithms (ES256, ES384, ES512)

ECDSA algorithms require a valid ECC public key to verify the message. The PEM encoded public key may be used directly with the Certificate property. An example PEM encoded public certificate created by the CertMgr component:

-----BEGIN CERTIFICATE-----
MIIBETCBtaADAgECAgF7MAwGCCqGSM49BAMCBQAwEDEOMAwGA1UEAxMFZWNkc2EwHhcNMjMw
NzAzMTcwMjU3WhcNMjQwNzAyMTcwMjU3WjAQMQ4wDAYDVQQDEwVlY2RzYTBZMBMGByqGSM49
AgEGCCqGSM49AwEHA0IABGJv251JI7ITcq+fac9Z2yYkhTLSRhWGzBw1wEJZbs/8AZbVmvcy
4BzKSZEaTfBsCHIt3FLNgRLdugI+B65eQDYwDAYIKoZIzj0EAwIFAANJADBGAiEAzmH5LKKn
r4iy9kJvIlCslpcBHM/8k0XQaj13Zwhm2ocCIQD/cSiC4EuqRkxT4IKET7ko3iI5YUS+J5W5
/0xnxxxIpQ==
-----END CERTIFICATE-----

Jwt jwt = new Jwt(); jwt.SignerCert = new Certificate(CertStoreTypes.cstPublicKeyBlob, pubKey, "", "*"); jwt.EncodedJWT = signedData; jwt.Verify(); string issuer = jwt.ClaimIssuer;

Notes for Unsecured (none)

To parse a JWS token without any security call the Sign method without setting the Key or Certificate properties.

Jwt jwt = new Jwt(); jwt.EncodedJWT = signedData; jwt.Verify(); string issuer = jwt.ClaimIssuer;

Encrypting

The Encrypt method may be used to encrypt a payload with a variety of algorithms. To create an encrypted JWT JSON Web Encryption (JWE) is performed by first generating a random key used to encrypt the content. The content encryption key is used to encrypt the content using the algorithm specified by ContentEncryptionAlgorithm. The content encryption key is then encrypted itself using the algorithm specified by EncryptionAlgorithm. The content encryption key is not directly exposed in the API as it is randomly generated.

After calling this method the compact serialized JWT is written to EncodedJWT. For instance:

eyJhbGciOiJBMjU2S1ciLCJlbmMiOiJBMTI4Q0JDLUhTMjU2In0.4tcAnZJ00u4GY2kLOanPOL4CtvcfraZ8SIi6bOZ27qYBI2rHITPc1Q.c_9rCTdPn-saLCti2ZEyWQ.eLwqqo5BGNa70RlsvT-vTh7Gk0hjpJYY_9Zc39Vim_qEtjyMcxZygBpkfx9brzQr9rUbuiAhoCMXKip2-lKT6w.NkuLDPmWxWL4BaTWHWicIQ

The component will use the values present in the Claim* properties to build the encoded JWT. After calling this method the EncodedJWT property will hold the compact serialized JWT. The following properties are applicable when calling this method:

Notes for AES Algorithms (A128KW, A192KW, A256KW, A128GCMKW, A192GCMKW, A256GCMKW)

When EncryptionAlgorithm is set to a AES algorithm Key must be set to a key of appropriate length for the algorithm. For instance a 256 bit key would be used for A256KW.

To use an existing AES key provide the bytes to the Key property. For instance:

byte[] key = new byte[] { 164, 60, 194, 0, 161, 189, 41, 38, 130, 89, 141, 164, 45, 170, 159, 209, 69, 137, 243, 216, 191, 131, 47, 250, 32, 107, 231, 117, 37, 158, 225, 234 }; //Encrypt the payload using A256KW Jwt jwt = new Jwt(); jwt.KeyB = key; jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaA256KW; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

Notes for RSA Algorithms (RSA1_5, RSA-OEAP, RSA-OAEP-256)

The RSA based algorithms use asymmetric encryption. Encrypting is done with a public key and decryption is done with a private key. The public certificate should be in PEM (base64) format. For instance:

Jwt jwt = new Jwt(); jwt.Certificate = new Certificate("..\\recipient.cer"); jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaRSA_OAEP; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

Notes for ECDH Algorithms (ECDH-ES, ECDH-ES+A128KW, ECDH-ES+A192KW, ECDH-ES+A256KW)

ECDH algorithms require a valid ECC public key to encrypt the message. If the key was originally created with the ECC component the PEM encoded PublicKey may be used directly with the Certificate property. An example PEM encoded public certificate created by the ECC component:

-----BEGIN PUBLIC KEY-----
MIIBMjCB7AYHKoZIzj0CATCB4AIBATAsBgcqhkjOPQEBAiEA/////wAAAAEAAAAAAAAAAAAA
AAD///////////////8wRAQg/////wAAAAEAAAAAAAAAAAAAAAD///////////////wEIFrG
NdiqOpPns+u9VXaYhrxlHQawzFOw9jvOPD4n0mBLBEEEaxfR8uEsQkf4vOblY6RA8ncDfYEt
6zOg9KE5RdiYwpZP40Li/hp/m47n60p8D54WK84zV2sxXs7LtkBoN79R9QIhAP////8AAAAA
//////////+85vqtpxeehPO5ysL8YyVRAgEBA0EEIC5rbLp11Mnz6cBXLLriaDIov3rm8RAY
x/OR0bOKiff0cQy+sLVaxjseqFk/+Xvl4ORSv5Z6HdHv5GyEpA0UoA==
-----END PUBLIC KEY-----

Jwt jwt = new Jwt(); jwt.Certificate = new Certificate(CertStoreTypes.cstPublicKeyFile, pubKeyFile, "", "*"); jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaECDH_ES_A256KW; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

To use an ECC public key created by other means the ECC component may be used to import the key parameters. Populate the Rx and Ry properties of the ECC component first to obtain the PEM formatted public key. For instance:

byte[] x_bytes = new byte[] { 171, 170, 196, 151, 94, 196, 231, 12, 128, 232, 17, 61, 45, 105, 41, 209, 192, 187, 112, 242, 110, 178, 95, 240, 36, 55, 83, 171, 190, 176, 78, 13 }; byte[] y_bytes = new byte[] { 197, 75, 134, 245, 245, 28, 199, 9, 7, 117, 1, 54, 49, 178, 135, 252, 62, 89, 35, 180, 117, 80, 231, 23, 110, 250, 28, 124, 219, 253, 224, 156 }; nsoftware.IPWorksEncrypt.Ecc ecc = new nsoftware.IPWorksEncrypt.Ecc(); ecc.Key.RxB = x_bytes; ecc.Key.RyB = y_bytes; string pubKey = ecc.Key.PublicKey; Jwt jwt = new Jwt(); jwt.Certificate = new Certificate(CertStoreTypes.cstPublicKeyFile, pubKey, "", "*"); jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaECDH_ES_A256KW; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

Notes for PBES Algorithms (PBES2-HS256+A128KW, PBES2-HS384+A192KW, PBES2-HS512+A256KW

PBES algorithms derive a content encryption key from the KeyPassword property. Set KeyPassword to a shared secret.

Jwt jwt = new Jwt(); jwt.KeyPassword = "secret"; jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaPBES2_HS512_A256KW; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

Notes for Direct Shared Keys

When EncryptionAlgorithm is set to Direct the Key property must be set to a valid symmetric key that will be used directly by the ContentEncryptionAlgorithm. In this case a content encryption key is not generated randomly, the Key is used instead. The length of the specified Key must be valid for the selected ContentEncryptionAlgorithm. For instance:

byte[] key = new byte[] { 164, 62, 191, 60, 161, 189, 41, 38, 130, 89, 141, 164, 45, 170, 159, 209, 69, 137, 243, 216, 191, 131, 47, 250, 32, 107, 231, 117, 37, 158, 225, 234 }; Jwt jwt = new Jwt(); jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaDir; jwt.ContentEncryptionAlgorithm = JwtContentEncryptionAlgorithms.ceaA256GCM; jwt.KeyB = key; jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

Decrypting

The Decrypt method may be used to decrypt a received JWE message. Before calling the Decrypt method set EncodedJWT to a valid compact serialized JWT string. For instance:

eyJhbGciOiJBMjU2S1ciLCJlbmMiOiJBMTI4Q0JDLUhTMjU2In0.4tcAnZJ00u4GY2kLOanPOL4CtvcfraZ8SIi6bOZ27qYBI2rHITPc1Q.c_9rCTdPn-saLCti2ZEyWQ.eLwqqo5BGNa70RlsvT-vTh7Gk0hjpJYY_9Zc39Vim_qEtjyMcxZygBpkfx9brzQr9rUbuiAhoCMXKip2-lKT6w.NkuLDPmWxWL4BaTWHWicIQ

The type and format of the private key depends on the algorithm used to encrypt the data. The following table summarizes the relationship:

AlgorithmPrivate Key Location
AESKey
RSA and ECDHCertificate
PBESKeyPassword
If the correct Key or Certificate is not known ahead of time the KeyId parameter of the RecipientInfo event may be used to identify the correct key.

If this method returns without error decryption was successful. If decryption fails then this method raises an exception. After calling this method the payload will be present in the Claim* properties and the HeaderParams property will contain the headers. Headers of the parsed message are also available through the HeaderParam event.

The following properties are applicable when calling this method:

After calling this method the following properties are populated:

Notes for AES Algorithms (A128KW, A192KW, A256KW, A128GCMKW, A192GCMKW, A256GCMKW)

To decrypt messages that use AES encryption Key must be set to a key of appropriate length for the algorithm. For instance a 256 bit key would be used for A256KW.

The key must be known by both parties in order for encryption and decryption to take place.

byte[] key = new byte[] { 164, 60, 194, 0, 161, 189, 41, 38, 130, 89, 141, 164, 45, 170, 159, 209, 69, 137, 243, 216, 191, 131, 47, 250, 32, 107, 231, 117, 37, 158, 225, 234 }; Jwt jwt = new Jwt(); jwt.KeyB = key; jwt.EncodedJWT = encryptedData; jwt.Decrypt(); string issuer = jwt.ClaimIssuer;

Notes for RSA Algorithms (RSA1_5, RSA-OEAP, RSA-OAEP-256)

The RSA based algorithms use asymmetric encryption. Encrypting is done with a public key and decryption is done with a private key. The certificate with private key must be specified. For instance:

Jwt jwt = new Jwt(); jwt.Certificate = new Certificate(CertStoreTypes.cstPFXFile, "..\\jwt.pfx", "password", "*"); jwt.EncodedJWT = encryptedData; jwt.Decrypt(); string issuer = jwt.ClaimIssuer;

Notes for ECDH Algorithms (ECDH-ES, ECDH-ES+A128KW, ECDH-ES+A192KW, ECDH-ES+A256KW)

ECDH algorithms require a valid ECC private key to decrypt the message. If the key was originally created with the ECC component the PEM encoded PrivateKey may be used directly with the Certificate property.

Jwt jwt = new Jwt(); jwt.Certificate = new Certificate(CertStoreTypes.cstPEMKeyFile, privKeyFile, "", "*"); jwt.EncodedJWT = encryptedData; jwt.Decrypt(); string issuer = jwt.ClaimIssuer;

To use an ECC private key created by other means the ECC component may be used to import the key parameters. Populate the Rx, Ry, and KB properties of the ECC component first to obtain the PEM formatted public key. For instance:

nsoftware.IPWorksEncrypt.Ecc ecc = new nsoftware.IPWorksEncrypt.Ecc(); byte[] x_bytes = new byte[] { 171, 170, 196, 151, 94, 196, 231, 12, 128, 232, 17, 61, 45, 105, 41, 209, 192, 187, 112, 242, 110, 178, 95, 240, 36, 55, 83, 171, 190, 176, 78, 13 }; byte[] y_bytes = new byte[] { 197, 75, 134, 245, 245, 28, 199, 9, 7, 117, 1, 54, 49, 178, 135, 252, 62, 89, 35, 180, 117, 80, 231, 23, 110, 250, 28, 124, 219, 253, 224, 156 }; byte[] k_bytes = new byte[] { 81, 65, 201, 24, 235, 249, 162, 148, 169, 150, 109, 181, 61, 238, 145, 122, 31, 30, 151, 94, 239, 90, 222, 217, 63, 103, 54, 2, 176, 232, 248, 168 }; ecc.Key.RxB = x_bytes; ecc.Key.RyB = y_bytes; ecc.Key.KB = k_bytes; string privKey = ecc.Key.PrivateKey; Jwt jwt = new Jwt(); jwt.Certificate = new Certificate(CertStoreTypes.cstPEMKeyBlob, privKey, "", "*"); jwt.EncodedJWT = encryptedData; jwt.Decrypt(); string issuer = jwt.ClaimIssuer;

Notes for PBES Algorithms (PBES2-HS256+A128KW, PBES2-HS384+A192KW, PBES2-HS512+A256KW

PBES algorithms derive a content encryption key from the KeyPassword property. Set KeyPassword to the shared secret.

Jwt jwt = new Jwt(); jwt.KeyPassword = "secret"; jwt.EncodedJWT = encryptedData; jwt.Decrypt(); string issuer = jwt.ClaimIssuer;

Notes for Direct Shared Keys

When Direct encryption is used the Key property must be set to a valid symmetric key that will be used directly by the ContentEncryptionAlgorithm. For instance:

byte[] key = new byte[] { 164, 60, 194, 0, 161, 189, 41, 38, 130, 89, 141, 164, 45, 170, 159, 209, 69, 137, 243, 216, 191, 131, 47, 250, 32, 107, 231, 117, 37, 158, 225, 234 }; Jwt jwt = new Jwt(); jwt.KeyB = key; jwt.EncodedJWT = encryptedData; jwt.Decrypt(); string issuer = jwt.ClaimIssuer;

Other Functionality

In addition to standard operations the component also supports a variety of other features including:

  • Adding custom header parameters with AddHeaderParam
  • Enforcing algorithm restrictions when verifying by setting StrictValidation
  • Inspect the JWT without verifying or decrypting by calling Parse

Property List


The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

CertEffectiveDateThe date on which this certificate becomes valid.
CertExpirationDateThe date on which the certificate expires.
CertExtendedKeyUsageA comma-delimited list of extended key usage identifiers.
CertFingerprintThe hex-encoded, 16-byte MD5 fingerprint of the certificate.
CertFingerprintSHA1The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
CertFingerprintSHA256The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
CertIssuerThe issuer of the certificate.
CertPrivateKeyThe private key of the certificate (if available).
CertPrivateKeyAvailableWhether a PrivateKey is available for the selected certificate.
CertPrivateKeyContainerThe name of the PrivateKey container for the certificate (if available).
CertPublicKeyThe public key of the certificate.
CertPublicKeyAlgorithmThe textual description of the certificate's public key algorithm.
CertPublicKeyLengthThe length of the certificate's public key (in bits).
CertSerialNumberThe serial number of the certificate encoded as a string.
CertSignatureAlgorithmThe text description of the certificate's signature algorithm.
CertStoreThe name of the certificate store for the client certificate.
CertStorePasswordIf the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
CertStoreTypeThe type of certificate store for this certificate.
CertSubjectAltNamesComma-separated lists of alternative subject names for the certificate.
CertThumbprintMD5The MD5 hash of the certificate.
CertThumbprintSHA1The SHA-1 hash of the certificate.
CertThumbprintSHA256The SHA-256 hash of the certificate.
CertUsageThe text description of UsageFlags .
CertUsageFlagsThe flags that show intended use for the certificate.
CertVersionThe certificate's version number.
CertSubjectThe subject of the certificate used for client authentication.
CertEncodedThe certificate (PEM/Base64 encoded).
ClaimAudienceThe audience claim.
ClaimExpThe expiration time claim.
ClaimIssuedAtThe claim indicating the time at which the JWT was issued.
ClaimIssuerThe issuer of the JWT.
ClaimJWTIdThe unique identifier for the JWT.
ClaimNotBeforeThe claim identifying the time before which the JWT is invalid.
JWTClaimCountThe number of records in the JWTClaim arrays.
JWTClaimDataTypeThe data type of the claim value.
JWTClaimNameThe claim name.
JWTClaimValueThe claim value.
ClaimSubjectThe subject identifies the principal of the JWT.
ContentEncryptionAlgorithmThe algorithm used to encrypt the content.
EncodedJWTThe encoded JWT.
EncryptionAlgorithmThe key encryption algorithm.
HeaderParamCountThe number of records in the HeaderParam arrays.
HeaderParamDataTypeThe data type of the header parameter.
HeaderParamNameThe header parameter name.
HeaderParamValueThe header parameter value.
KeyThe key used for HMAC and AES.
KeyIdThe Id of the key used to sign or encrypt the message.
KeyPasswordThe key password used in the PBES algorithm.
RecipientCertEffectiveDateThe date on which this certificate becomes valid.
RecipientCertExpirationDateThe date on which the certificate expires.
RecipientCertExtendedKeyUsageA comma-delimited list of extended key usage identifiers.
RecipientCertFingerprintThe hex-encoded, 16-byte MD5 fingerprint of the certificate.
RecipientCertFingerprintSHA1The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
RecipientCertFingerprintSHA256The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
RecipientCertIssuerThe issuer of the certificate.
RecipientCertPrivateKeyThe private key of the certificate (if available).
RecipientCertPrivateKeyAvailableWhether a PrivateKey is available for the selected certificate.
RecipientCertPrivateKeyContainerThe name of the PrivateKey container for the certificate (if available).
RecipientCertPublicKeyThe public key of the certificate.
RecipientCertPublicKeyAlgorithmThe textual description of the certificate's public key algorithm.
RecipientCertPublicKeyLengthThe length of the certificate's public key (in bits).
RecipientCertSerialNumberThe serial number of the certificate encoded as a string.
RecipientCertSignatureAlgorithmThe text description of the certificate's signature algorithm.
RecipientCertStoreThe name of the certificate store for the client certificate.
RecipientCertStorePasswordIf the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
RecipientCertStoreTypeThe type of certificate store for this certificate.
RecipientCertSubjectAltNamesComma-separated lists of alternative subject names for the certificate.
RecipientCertThumbprintMD5The MD5 hash of the certificate.
RecipientCertThumbprintSHA1The SHA-1 hash of the certificate.
RecipientCertThumbprintSHA256The SHA-256 hash of the certificate.
RecipientCertUsageThe text description of UsageFlags .
RecipientCertUsageFlagsThe flags that show intended use for the certificate.
RecipientCertVersionThe certificate's version number.
RecipientCertSubjectThe subject of the certificate used for client authentication.
RecipientCertEncodedThe certificate (PEM/Base64 encoded).
SignerCertEffectiveDateThe date on which this certificate becomes valid.
SignerCertExpirationDateThe date on which the certificate expires.
SignerCertExtendedKeyUsageA comma-delimited list of extended key usage identifiers.
SignerCertFingerprintThe hex-encoded, 16-byte MD5 fingerprint of the certificate.
SignerCertFingerprintSHA1The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
SignerCertFingerprintSHA256The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
SignerCertIssuerThe issuer of the certificate.
SignerCertPrivateKeyThe private key of the certificate (if available).
SignerCertPrivateKeyAvailableWhether a PrivateKey is available for the selected certificate.
SignerCertPrivateKeyContainerThe name of the PrivateKey container for the certificate (if available).
SignerCertPublicKeyThe public key of the certificate.
SignerCertPublicKeyAlgorithmThe textual description of the certificate's public key algorithm.
SignerCertPublicKeyLengthThe length of the certificate's public key (in bits).
SignerCertSerialNumberThe serial number of the certificate encoded as a string.
SignerCertSignatureAlgorithmThe text description of the certificate's signature algorithm.
SignerCertStoreThe name of the certificate store for the client certificate.
SignerCertStorePasswordIf the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
SignerCertStoreTypeThe type of certificate store for this certificate.
SignerCertSubjectAltNamesComma-separated lists of alternative subject names for the certificate.
SignerCertThumbprintMD5The MD5 hash of the certificate.
SignerCertThumbprintSHA1The SHA-1 hash of the certificate.
SignerCertThumbprintSHA256The SHA-256 hash of the certificate.
SignerCertUsageThe text description of UsageFlags .
SignerCertUsageFlagsThe flags that show intended use for the certificate.
SignerCertVersionThe certificate's version number.
SignerCertSubjectThe subject of the certificate used for client authentication.
SignerCertEncodedThe certificate (PEM/Base64 encoded).
SigningAlgorithmThe algorithm used when signing.

Method List


The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

AddClaimAdds an new claim.
AddHeaderParamAdds additional header parameters.
ConfigSets or retrieves a configuration setting.
DecryptDecrypts the encoded JWT.
EncryptEncrypts the claims with the specified algorithms.
ParseParses the encoded JWT.
ResetResets the component properties.
SignSigns the payload with the specified algorithm.
VerifyVerifies the signature of the encoded JWT.

Event List


The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

ClaimInfoFires once for each claim.
ErrorFired when information is available about errors during data delivery.
HeaderParamFires once for each JOSE header parameter.
RecipientInfoFired with information about the recipient key of the encrypted message.
SignerInfoFires with information about the signature.

Config Settings


The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AllowedSigningAlgorithmsAllowed signing algorithms when StrictValidation is set to True.
AudienceDelimiterDefines the character to separate audience values.
CompressionAlgorithmThe compression algorithm to use.
ExpectedAudienceThe expected audience claim.
ExpectedExpThe expected expiration time claim.
ExpectedIssuedAtThe expected time at which the JWT was issued.
ExpectedIssuerThe expected issuer of the JWT.
ExpectedJWTIdThe expected unique identifier for the JWT.
ExpectedNotBeforeThe expected claim identifying the time before which the JWT is invalid.
ExpectedSubjectThe expected subject identifying the principal of the JWT.
IncludeCertificateFormatThe certificate values to include in the signed message (if any).
InputMessageThe raw input to process.
IsEncryptedIndicates whether the EncodedJWT is encrypted.
IsSignedIndicates whether the EncodedJWT is signed.
IssuerCertsA collection of issuer certificates used with IncludeCertificateFormat.
KeyEncodingThe encoding of the Key value.
OutputMessageThe raw output of the operation.
PartyUInfoInformation about the producer of the message.
PartyVInfoInformation about the recipient of the message.
PBES2CountThe PBKDF2 iteration count.
PBES2SaltLengthThe salt input value length.
RawHeaderHolds the raw JOSE header.
StrictValidationRequires specific algorithms when processing.
BuildInfoInformation about the product's build.
CodePageThe system code page used for Unicode to Multibyte translations.
LicenseInfoInformation about the current license.
MaskSensitiveDataWhether sensitive data is masked in log messages.
UseFIPSCompliantAPITells the component whether or not to use FIPS certified APIs.
UseInternalSecurityAPIWhether or not to use the system security libraries or an internal implementation.

CertEffectiveDate Property (JWT Component)

The date on which this certificate becomes valid.

Syntax

__property String CertEffectiveDate = { read=FCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

CertExpirationDate Property (JWT Component)

The date on which the certificate expires.

Syntax

__property String CertExpirationDate = { read=FCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

CertExtendedKeyUsage Property (JWT Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String CertExtendedKeyUsage = { read=FCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

CertFingerprint Property (JWT Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String CertFingerprint = { read=FCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

CertFingerprintSHA1 Property (JWT Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String CertFingerprintSHA1 = { read=FCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

CertFingerprintSHA256 Property (JWT Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String CertFingerprintSHA256 = { read=FCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

CertIssuer Property (JWT Component)

The issuer of the certificate.

Syntax

__property String CertIssuer = { read=FCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

CertPrivateKey Property (JWT Component)

The private key of the certificate (if available).

Syntax

__property String CertPrivateKey = { read=FCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The CertPrivateKey may be available but not exportable. In this case, CertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

CertPrivateKeyAvailable Property (JWT Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool CertPrivateKeyAvailable = { read=FCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a CertPrivateKey is available for the selected certificate. If CertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

CertPrivateKeyContainer Property (JWT Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String CertPrivateKeyContainer = { read=FCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the CertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

CertPublicKey Property (JWT Component)

The public key of the certificate.

Syntax

__property String CertPublicKey = { read=FCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

CertPublicKeyAlgorithm Property (JWT Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String CertPublicKeyAlgorithm = { read=FCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

CertPublicKeyLength Property (JWT Component)

The length of the certificate's public key (in bits).

Syntax

__property int CertPublicKeyLength = { read=FCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

CertSerialNumber Property (JWT Component)

The serial number of the certificate encoded as a string.

Syntax

__property String CertSerialNumber = { read=FCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

CertSignatureAlgorithm Property (JWT Component)

The text description of the certificate's signature algorithm.

Syntax

__property String CertSignatureAlgorithm = { read=FCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

CertStore Property (JWT Component)

The name of the certificate store for the client certificate.

Syntax

__property String CertStore = { read=FCertStore, write=FSetCertStore };
__property DynamicArray<Byte> CertStoreB = { read=FCertStoreB, write=FSetCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The CertStoreType property denotes the type of the certificate store specified by CertStore. If the store is password-protected, specify the password in CertStorePassword.

CertStore is used in conjunction with the CertSubject property to specify client certificates. If CertStore has a value, and CertSubject or CertEncoded is set, a search for a certificate is initiated. Please see the CertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

CertStorePassword Property (JWT Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String CertStorePassword = { read=FCertStorePassword, write=FSetCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

CertStoreType Property (JWT Component)

The type of certificate store for this certificate.

Syntax

__property TipaJWTCertStoreTypes CertStoreType = { read=FCertStoreType, write=FSetCertStoreType };
enum TipaJWTCertStoreTypes { cstUser=0, cstMachine=1, cstPFXFile=2, cstPFXBlob=3, cstJKSFile=4, cstJKSBlob=5, cstPEMKeyFile=6, cstPEMKeyBlob=7, cstPublicKeyFile=8, cstPublicKeyBlob=9, cstSSHPublicKeyBlob=10, cstP7BFile=11, cstP7BBlob=12, cstSSHPublicKeyFile=13, cstPPKFile=14, cstPPKBlob=15, cstXMLFile=16, cstXMLBlob=17, cstJWKFile=18, cstJWKBlob=19, cstSecurityKey=20, cstBCFKSFile=21, cstBCFKSBlob=22, cstPKCS11=23, cstAuto=99 };

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user.

Note: This store type is not available in Java.

1 (cstMachine)For Windows, this specifies that the certificate store is a machine store.

Note: This store type is not available in Java.

2 (cstPFXFile)The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates.

Note: This store type is only available in Java.

5 (cstJKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.

Note: This store type is only available in Java.

6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).

Note: This store type is only available in Java and .NET.

22 (cstBCFKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.

Note: This store type is only available in Java and .NET.

23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS#11 interface.

To use a security key, the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the CertStore and set CertStorePassword to the PIN.

Code Example. SSH Authentication with Security Key: certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Data Type

Integer

CertSubjectAltNames Property (JWT Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String CertSubjectAltNames = { read=FCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

CertThumbprintMD5 Property (JWT Component)

The MD5 hash of the certificate.

Syntax

__property String CertThumbprintMD5 = { read=FCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

CertThumbprintSHA1 Property (JWT Component)

The SHA-1 hash of the certificate.

Syntax

__property String CertThumbprintSHA1 = { read=FCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

CertThumbprintSHA256 Property (JWT Component)

The SHA-256 hash of the certificate.

Syntax

__property String CertThumbprintSHA256 = { read=FCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

CertUsage Property (JWT Component)

The text description of UsageFlags .

Syntax

__property String CertUsage = { read=FCertUsage };

Default Value

""

Remarks

The text description of CertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

  • Digital Signature
  • Non-Repudiation
  • Key Encipherment
  • Data Encipherment
  • Key Agreement
  • Certificate Signing
  • CRL Signing
  • Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

CertUsageFlags Property (JWT Component)

The flags that show intended use for the certificate.

Syntax

__property int CertUsageFlags = { read=FCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of CertUsageFlags is a combination of the following flags:

0x80Digital Signature
0x40Non-Repudiation
0x20Key Encipherment
0x10Data Encipherment
0x08Key Agreement
0x04Certificate Signing
0x02CRL Signing
0x01Encipher Only

Please see the CertUsage property for a text representation of CertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

CertVersion Property (JWT Component)

The certificate's version number.

Syntax

__property String CertVersion = { read=FCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

CertSubject Property (JWT Component)

The subject of the certificate used for client authentication.

Syntax

__property String CertSubject = { read=FCertSubject, write=FSetCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

FieldMeaning
CNCommon Name. This is commonly a hostname like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma, it must be quoted.

Data Type

String

CertEncoded Property (JWT Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String CertEncoded = { read=FCertEncoded, write=FSetCertEncoded };
__property DynamicArray<Byte> CertEncodedB = { read=FCertEncodedB, write=FSetCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The CertStore and CertSubject properties also may be used to specify a certificate.

When CertEncoded is set, a search is initiated in the current CertStore for the private key of the certificate. If the key is found, CertSubject is updated to reflect the full subject of the selected certificate; otherwise, CertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

ClaimAudience Property (JWT Component)

The audience claim.

Syntax

__property String ClaimAudience = { read=FClaimAudience, write=FSetClaimAudience };

Default Value

""

Remarks

This property holds the audience claim. The audience claim identifies the recipients that the JWT is intended for. The values specified here are case sensitive.

Multiple audience values are supported and should be separated by a semicolon. See AudienceDelimiter for details.

This property corresponds to the aud JSON property.

Data Type

String

ClaimExp Property (JWT Component)

The expiration time claim.

Syntax

__property String ClaimExp = { read=FClaimExp, write=FSetClaimExp };

Default Value

""

Remarks

This property holds the expiration time claim. The expiration time claim identifies the expiration time on or after which the JWT must not be accepted. This value corresponds to the exp JSON property.

This value is represented as a numeric value containing the number of seconds since the epoch (January 1st 1970). For instance 1498599163.

Data Type

String

ClaimIssuedAt Property (JWT Component)

The claim indicating the time at which the JWT was issued.

Syntax

__property String ClaimIssuedAt = { read=FClaimIssuedAt, write=FSetClaimIssuedAt };

Default Value

""

Remarks

This property holds the time at which the JWT was issued. This value corresponds to the iat JSON property.

This value is represented as a numeric value containing the number of seconds since the epoch (January 1st 1970). For instance 1498599163.

Data Type

String

ClaimIssuer Property (JWT Component)

The issuer of the JWT.

Syntax

__property String ClaimIssuer = { read=FClaimIssuer, write=FSetClaimIssuer };

Default Value

""

Remarks

This property holds the issuer of the JWT. The value is a case-sensitive string.

This property corresponds to the iss JSON property.

Data Type

String

ClaimJWTId Property (JWT Component)

The unique identifier for the JWT.

Syntax

__property String ClaimJWTId = { read=FClaimJWTId, write=FSetClaimJWTId };

Default Value

""

Remarks

This property holds the unique identifier for the JWT. The value is a case-sensitive string.

This property corresponds to the jti JSON property.

Data Type

String

ClaimNotBefore Property (JWT Component)

The claim identifying the time before which the JWT is invalid.

Syntax

__property String ClaimNotBefore = { read=FClaimNotBefore, write=FSetClaimNotBefore };

Default Value

""

Remarks

This property identifies the time before which the JWT is invalid. This value corresponds to the nbf JSON property.

This value is represented as a numeric value containing the number of seconds since the epoch (January 1st 1970). For instance 1498599163.

Data Type

String

JWTClaimCount Property (JWT Component)

The number of records in the JWTClaim arrays.

Syntax

__property int JWTClaimCount = { read=FJWTClaimCount, write=FSetJWTClaimCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at JWTClaimCount - 1.

This property is not available at design time.

Data Type

Integer

JWTClaimDataType Property (JWT Component)

The data type of the claim value.

Syntax

__property TipaJWTJWTClaimDataTypes JWTClaimDataType[int JWTClaimIndex] = { read=FJWTClaimDataType, write=FSetJWTClaimDataType };
enum TipaJWTJWTClaimDataTypes { dtObject=0, dtArray=1, dtString=2, dtNumber=3, dtBool=4, dtNull=5 };

Default Value

dtString

Remarks

The data type of the claim value.

This property specifies the JSON type of the claim value. Possible values are:

  • 0 (Object)
  • 1 (Array)
  • 2 (String)
  • 3 (Number)
  • 4 (Bool)
  • 5 (Null)

The JWTClaimIndex parameter specifies the index of the item in the array. The size of the array is controlled by the JWTClaimCount property.

This property is not available at design time.

Data Type

Integer

JWTClaimName Property (JWT Component)

The claim name.

Syntax

__property String JWTClaimName[int JWTClaimIndex] = { read=FJWTClaimName, write=FSetJWTClaimName };

Default Value

""

Remarks

The claim name.

The JWTClaimIndex parameter specifies the index of the item in the array. The size of the array is controlled by the JWTClaimCount property.

This property is not available at design time.

Data Type

String

JWTClaimValue Property (JWT Component)

The claim value.

Syntax

__property String JWTClaimValue[int JWTClaimIndex] = { read=FJWTClaimValue, write=FSetJWTClaimValue };

Default Value

""

Remarks

The claim value.

The JWTClaimIndex parameter specifies the index of the item in the array. The size of the array is controlled by the JWTClaimCount property.

This property is not available at design time.

Data Type

String

ClaimSubject Property (JWT Component)

The subject identifies the principal of the JWT.

Syntax

__property String ClaimSubject = { read=FClaimSubject, write=FSetClaimSubject };

Default Value

""

Remarks

This property holds the subject which identifies the principal of the JWT. The value is a case-sensitive string.

This property corresponds to the sub JSON property.

Data Type

String

ContentEncryptionAlgorithm Property (JWT Component)

The algorithm used to encrypt the content.

Syntax

__property TipaJWTContentEncryptionAlgorithms ContentEncryptionAlgorithm = { read=FContentEncryptionAlgorithm, write=FSetContentEncryptionAlgorithm };
enum TipaJWTContentEncryptionAlgorithms { ceaA128CBC_HS256=0, ceaA192CBC_HS384=1, ceaA256CBC_HS512=2, ceaA128GCM=3, ceaA192GCM=4, ceaA256GCM=5 };

Default Value

ceaA128CBC_HS256

Remarks

This property specifies the algorithm used to encrypt the content.

The following values are supported.

AlgorithmDescription
0 (ceaA128CBC_HS256 - default) AES_128_CBC_HMAC_SHA_256 authenticated encryption algorithm
1 (ceaA192CBC_HS384) AES_192_CBC_HMAC_SHA_384 authenticated encryption algorithm
2 (ceaA256CBC_HS512) AES_256_CBC_HMAC_SHA_512 authenticated encryption algorithm
3 (ceaA128GCM) AES GCM using 128-bit key
4 (ceaA192GCM) AES GCM using 192-bit key
5 (ceaA256GCM) AES GCM using 256-bit key

Data Type

Integer

EncodedJWT Property (JWT Component)

The encoded JWT.

Syntax

__property String EncodedJWT = { read=FEncodedJWT, write=FSetEncodedJWT };

Default Value

""

Remarks

This property holds the encoded JWT. This is populated after calling Sign or Encrypt.

This must be set to a valid JWT before calling Verify, Decrypt or Parse.

Data Type

String

EncryptionAlgorithm Property (JWT Component)

The key encryption algorithm.

Syntax

__property TipaJWTEncryptionAlgorithms EncryptionAlgorithm = { read=FEncryptionAlgorithm, write=FSetEncryptionAlgorithm };
enum TipaJWTEncryptionAlgorithms { eaRSA1_5=0, eaRSA_OAEP=1, eaRSA_OAEP_256=2, eaA128KW=3, eaA192KW=4, eaA256KW=5, eaDir=6, eaECDH_ES=7, eaECDH_ES_A128KW=8, eaECDH_ES_A192KW=9, eaECDH_ES_A256KW=10, eaA128GCMKW=11, eaA192GCMKW=12, eaA256GCMKW=13, eaPBES2_HS256_A128KW=14, eaPBES2_HS384_A192KW=15, eaPBES2_HS512_A256KW=16 };

Default Value

eaRSA1_5

Remarks

This property specifies the algorithm used to encrypt the randomly generated content encryption key.

When using an AES algorithm the Key property must be specified. When using an RSA or ECDH algorithm the RecipientCert property must be specified. When using a PBES algorithm the KeyPassword property must be specified;. Possible values are:

AlgorithmDescriptionKey Location
0 (eaRSA1_5 - default) RSAES-PKCS1-v1_5 RecipientCert
1 (eaRSA_OAEP) RSAES OAEP using default parameters RecipientCert
2 (eaRSA_OAEP_256) RSAES OAEP using SHA-256 and MGF1 with SHA-256 RecipientCert
3 (eaA128KW) AES Key Wrap with default initial using 128-bit key Key
4 (eaA192KW) AES Key Wrap with default initial using 192-bit key Key
5 (eaA256KW) AES Key Wrap with default initial using 256-bit key Key
6 (eaDir) Direct use of a shared symmetric key as the CEK Key
7 (eaECDH_ES) Elliptic Curve Ephemeral Static key agreement using Concat KDF RecipientCert
8 (eaECDH_ES_A128KW) ECDH-ES using Concat KDF and CEK wrapped with A128KW RecipientCert
9 (eaECDH_ES_A192KW) ECDH-ES using Concat KDF and CEK wrapped with A192KW RecipientCert
10 (eaECDH_ES_A256KW) ECDH-ES using Concat KDF and CEK wrapped with A256KW RecipientCert
11 (eaA128GCMKW) Key wrapping with AES GCM using 128-bit key Key
12 (eaA192GCMKW) Key wrapping with AES GCM using 192-bit key Key
13 (eaA256GCMKW) Key wrapping with AES GCM using 256-bit key Key
14 (eaPBES2_HS256_A128KW) PBES2 with HMAC SHA-256 and A128KW KeyPassword
15 (eaPBES2_HS384_A192KW) PBES2 with HMAC SHA-384 and A192KW KeyPassword
16 (eaPBES2_HS512_A256KW) PBES2 with HMAC SHA-512 and A256KW KeyPassword

When set to an ECDH algorithm the following settings are also applicable:

When set to a PBES algorithm the following settings are also applicable:

Data Type

Integer

HeaderParamCount Property (JWT Component)

The number of records in the HeaderParam arrays.

Syntax

__property int HeaderParamCount = { read=FHeaderParamCount, write=FSetHeaderParamCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at HeaderParamCount - 1.

This property is not available at design time.

Data Type

Integer

HeaderParamDataType Property (JWT Component)

The data type of the header parameter.

Syntax

__property TipaJWTHeaderParamDataTypes HeaderParamDataType[int HeaderParamIndex] = { read=FHeaderParamDataType, write=FSetHeaderParamDataType };
enum TipaJWTHeaderParamDataTypes { dtObject=0, dtArray=1, dtString=2, dtNumber=3, dtBool=4, dtNull=5 };

Default Value

dtString

Remarks

The data type of the header parameter.

This property specifies the JSON type of the header parameter value. Possible values are:

  • 0 (Object)
  • 1 (Array)
  • 2 (String)
  • 3 (Number)
  • 4 (Bool)
  • 5 (Null)

The HeaderParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the HeaderParamCount property.

This property is not available at design time.

Data Type

Integer

HeaderParamName Property (JWT Component)

The header parameter name.

Syntax

__property String HeaderParamName[int HeaderParamIndex] = { read=FHeaderParamName, write=FSetHeaderParamName };

Default Value

""

Remarks

The header parameter name.

The HeaderParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the HeaderParamCount property.

This property is not available at design time.

Data Type

String

HeaderParamValue Property (JWT Component)

The header parameter value.

Syntax

__property String HeaderParamValue[int HeaderParamIndex] = { read=FHeaderParamValue, write=FSetHeaderParamValue };

Default Value

""

Remarks

The header parameter value.

The HeaderParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the HeaderParamCount property.

This property is not available at design time.

Data Type

String

Key Property (JWT Component)

The key used for HMAC and AES.

Syntax

__property String Key = { read=FKey, write=FSetKey };
__property DynamicArray<Byte> KeyB = { read=FKeyB, write=FSetKeyB };

Default Value

""

Remarks

This property specifies the key used when signing with an HMAC algorithm or encrypting with an AES algorithm.

Signing

This property is applicable when SigningAlgorithm is set to an HMAC algorithm.

It is recommended that the length of the key be equal to or larger than the hash size of the algorithm. Use of keys shorter than the hash size is discouraged.

Sizes (in bytes)

SHA1SHA224SHA256SHA384SHA512MD5RIPEMD160
Recommended Key Size20 28 32 48 64 16 20
Hash Size 20 28 32 48 64 16 20
Block Size 64 64 64 128 128 64 64

Key Length Details

As mentioned above it is recommended to use a key size equal to the hash size. Use of keys larger than the hash size does not typically significantly increase the function strength. Keys of any length are technically valid however see the below processing rules to understand how keys of varying lengths are treated:

  • If the key length is equal to the hash size (recommended) it is used without modification.
  • If the key length is less than the hash size it is used without modification.
  • If the key length is less than or equal to the block size it is used without modification.
  • If the key length is larger than the block size is it first hashed with the same algorithm.

Encrypting

When EncryptionAlgorithm is set to an AES algorithm this property must hold the symmetric key used for encryption and decryption. The size of the key must match the size of the algorithm. For instance when selecting the algorithm A256GCMKW (AES 256) the size of the key must also be 256 bits (32 bytes).

In the case where EncryptionAlgorithm is set to Direct this key is used directly with the algorithm specified by ContentEncryptionAlgorithm and must be an appropriate size for the selected ContentEncryptionAlgorithm.

Data Type

Byte Array

KeyId Property (JWT Component)

The Id of the key used to sign or encrypt the message.

Syntax

__property String KeyId = { read=FKeyId, write=FSetKeyId };

Default Value

""

Remarks

This property optionally specifies the Id of the key used to sign the message.

Any string value may be supplied here to help the other party identify the key used to sign or encrypt the message. This may be set before calling the Sign or Encrypt method.

Data Type

String

KeyPassword Property (JWT Component)

The key password used in the PBES algorithm.

Syntax

__property String KeyPassword = { read=FKeyPassword, write=FSetKeyPassword };

Default Value

""

Remarks

This property specifies the key password used to derive a key when using a PBES EncryptionAlgorithm.

This is only applicable to PBES algorithms and must be set before calling Encrypt or Decrypt.

This property does not apply when calling Sign or Verify.

Data Type

String

RecipientCertEffectiveDate Property (JWT Component)

The date on which this certificate becomes valid.

Syntax

__property String RecipientCertEffectiveDate = { read=FRecipientCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

RecipientCertExpirationDate Property (JWT Component)

The date on which the certificate expires.

Syntax

__property String RecipientCertExpirationDate = { read=FRecipientCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

RecipientCertExtendedKeyUsage Property (JWT Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String RecipientCertExtendedKeyUsage = { read=FRecipientCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

RecipientCertFingerprint Property (JWT Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String RecipientCertFingerprint = { read=FRecipientCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

RecipientCertFingerprintSHA1 Property (JWT Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String RecipientCertFingerprintSHA1 = { read=FRecipientCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

RecipientCertFingerprintSHA256 Property (JWT Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String RecipientCertFingerprintSHA256 = { read=FRecipientCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

RecipientCertIssuer Property (JWT Component)

The issuer of the certificate.

Syntax

__property String RecipientCertIssuer = { read=FRecipientCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

RecipientCertPrivateKey Property (JWT Component)

The private key of the certificate (if available).

Syntax

__property String RecipientCertPrivateKey = { read=FRecipientCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The RecipientCertPrivateKey may be available but not exportable. In this case, RecipientCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

RecipientCertPrivateKeyAvailable Property (JWT Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool RecipientCertPrivateKeyAvailable = { read=FRecipientCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a RecipientCertPrivateKey is available for the selected certificate. If RecipientCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

RecipientCertPrivateKeyContainer Property (JWT Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String RecipientCertPrivateKeyContainer = { read=FRecipientCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the RecipientCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

RecipientCertPublicKey Property (JWT Component)

The public key of the certificate.

Syntax

__property String RecipientCertPublicKey = { read=FRecipientCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

RecipientCertPublicKeyAlgorithm Property (JWT Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String RecipientCertPublicKeyAlgorithm = { read=FRecipientCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

RecipientCertPublicKeyLength Property (JWT Component)

The length of the certificate's public key (in bits).

Syntax

__property int RecipientCertPublicKeyLength = { read=FRecipientCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

RecipientCertSerialNumber Property (JWT Component)

The serial number of the certificate encoded as a string.

Syntax

__property String RecipientCertSerialNumber = { read=FRecipientCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

RecipientCertSignatureAlgorithm Property (JWT Component)

The text description of the certificate's signature algorithm.

Syntax

__property String RecipientCertSignatureAlgorithm = { read=FRecipientCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

RecipientCertStore Property (JWT Component)

The name of the certificate store for the client certificate.

Syntax

__property String RecipientCertStore = { read=FRecipientCertStore, write=FSetRecipientCertStore };
__property DynamicArray<Byte> RecipientCertStoreB = { read=FRecipientCertStoreB, write=FSetRecipientCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The RecipientCertStoreType property denotes the type of the certificate store specified by RecipientCertStore. If the store is password-protected, specify the password in RecipientCertStorePassword.

RecipientCertStore is used in conjunction with the RecipientCertSubject property to specify client certificates. If RecipientCertStore has a value, and RecipientCertSubject or RecipientCertEncoded is set, a search for a certificate is initiated. Please see the RecipientCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

RecipientCertStorePassword Property (JWT Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String RecipientCertStorePassword = { read=FRecipientCertStorePassword, write=FSetRecipientCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

RecipientCertStoreType Property (JWT Component)

The type of certificate store for this certificate.

Syntax

__property TipaJWTRecipientCertStoreTypes RecipientCertStoreType = { read=FRecipientCertStoreType, write=FSetRecipientCertStoreType };
enum TipaJWTRecipientCertStoreTypes { cstUser=0, cstMachine=1, cstPFXFile=2, cstPFXBlob=3, cstJKSFile=4, cstJKSBlob=5, cstPEMKeyFile=6, cstPEMKeyBlob=7, cstPublicKeyFile=8, cstPublicKeyBlob=9, cstSSHPublicKeyBlob=10, cstP7BFile=11, cstP7BBlob=12, cstSSHPublicKeyFile=13, cstPPKFile=14, cstPPKBlob=15, cstXMLFile=16, cstXMLBlob=17, cstJWKFile=18, cstJWKBlob=19, cstSecurityKey=20, cstBCFKSFile=21, cstBCFKSBlob=22, cstPKCS11=23, cstAuto=99 };

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user.

Note: This store type is not available in Java.

1 (cstMachine)For Windows, this specifies that the certificate store is a machine store.

Note: This store type is not available in Java.

2 (cstPFXFile)The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates.

Note: This store type is only available in Java.

5 (cstJKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.

Note: This store type is only available in Java.

6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).

Note: This store type is only available in Java and .NET.

22 (cstBCFKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.

Note: This store type is only available in Java and .NET.

23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS#11 interface.

To use a security key, the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the RecipientCertStore and set RecipientCertStorePassword to the PIN.

Code Example. SSH Authentication with Security Key: certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Data Type

Integer

RecipientCertSubjectAltNames Property (JWT Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String RecipientCertSubjectAltNames = { read=FRecipientCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

RecipientCertThumbprintMD5 Property (JWT Component)

The MD5 hash of the certificate.

Syntax

__property String RecipientCertThumbprintMD5 = { read=FRecipientCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

RecipientCertThumbprintSHA1 Property (JWT Component)

The SHA-1 hash of the certificate.

Syntax

__property String RecipientCertThumbprintSHA1 = { read=FRecipientCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

RecipientCertThumbprintSHA256 Property (JWT Component)

The SHA-256 hash of the certificate.

Syntax

__property String RecipientCertThumbprintSHA256 = { read=FRecipientCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

RecipientCertUsage Property (JWT Component)

The text description of UsageFlags .

Syntax

__property String RecipientCertUsage = { read=FRecipientCertUsage };

Default Value

""

Remarks

The text description of RecipientCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

  • Digital Signature
  • Non-Repudiation
  • Key Encipherment
  • Data Encipherment
  • Key Agreement
  • Certificate Signing
  • CRL Signing
  • Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

RecipientCertUsageFlags Property (JWT Component)

The flags that show intended use for the certificate.

Syntax

__property int RecipientCertUsageFlags = { read=FRecipientCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of RecipientCertUsageFlags is a combination of the following flags:

0x80Digital Signature
0x40Non-Repudiation
0x20Key Encipherment
0x10Data Encipherment
0x08Key Agreement
0x04Certificate Signing
0x02CRL Signing
0x01Encipher Only

Please see the RecipientCertUsage property for a text representation of RecipientCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

RecipientCertVersion Property (JWT Component)

The certificate's version number.

Syntax

__property String RecipientCertVersion = { read=FRecipientCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

RecipientCertSubject Property (JWT Component)

The subject of the certificate used for client authentication.

Syntax

__property String RecipientCertSubject = { read=FRecipientCertSubject, write=FSetRecipientCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

FieldMeaning
CNCommon Name. This is commonly a hostname like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma, it must be quoted.

Data Type

String

RecipientCertEncoded Property (JWT Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String RecipientCertEncoded = { read=FRecipientCertEncoded, write=FSetRecipientCertEncoded };
__property DynamicArray<Byte> RecipientCertEncodedB = { read=FRecipientCertEncodedB, write=FSetRecipientCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The RecipientCertStore and RecipientCertSubject properties also may be used to specify a certificate.

When RecipientCertEncoded is set, a search is initiated in the current RecipientCertStore for the private key of the certificate. If the key is found, RecipientCertSubject is updated to reflect the full subject of the selected certificate; otherwise, RecipientCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SignerCertEffectiveDate Property (JWT Component)

The date on which this certificate becomes valid.

Syntax

__property String SignerCertEffectiveDate = { read=FSignerCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SignerCertExpirationDate Property (JWT Component)

The date on which the certificate expires.

Syntax

__property String SignerCertExpirationDate = { read=FSignerCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SignerCertExtendedKeyUsage Property (JWT Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SignerCertExtendedKeyUsage = { read=FSignerCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SignerCertFingerprint Property (JWT Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SignerCertFingerprint = { read=FSignerCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SignerCertFingerprintSHA1 Property (JWT Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SignerCertFingerprintSHA1 = { read=FSignerCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SignerCertFingerprintSHA256 Property (JWT Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SignerCertFingerprintSHA256 = { read=FSignerCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SignerCertIssuer Property (JWT Component)

The issuer of the certificate.

Syntax

__property String SignerCertIssuer = { read=FSignerCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SignerCertPrivateKey Property (JWT Component)

The private key of the certificate (if available).

Syntax

__property String SignerCertPrivateKey = { read=FSignerCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SignerCertPrivateKey may be available but not exportable. In this case, SignerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SignerCertPrivateKeyAvailable Property (JWT Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SignerCertPrivateKeyAvailable = { read=FSignerCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SignerCertPrivateKey is available for the selected certificate. If SignerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SignerCertPrivateKeyContainer Property (JWT Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SignerCertPrivateKeyContainer = { read=FSignerCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SignerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SignerCertPublicKey Property (JWT Component)

The public key of the certificate.

Syntax

__property String SignerCertPublicKey = { read=FSignerCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SignerCertPublicKeyAlgorithm Property (JWT Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SignerCertPublicKeyAlgorithm = { read=FSignerCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SignerCertPublicKeyLength Property (JWT Component)

The length of the certificate's public key (in bits).

Syntax

__property int SignerCertPublicKeyLength = { read=FSignerCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SignerCertSerialNumber Property (JWT Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SignerCertSerialNumber = { read=FSignerCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SignerCertSignatureAlgorithm Property (JWT Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SignerCertSignatureAlgorithm = { read=FSignerCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SignerCertStore Property (JWT Component)

The name of the certificate store for the client certificate.

Syntax

__property String SignerCertStore = { read=FSignerCertStore, write=FSetSignerCertStore };
__property DynamicArray<Byte> SignerCertStoreB = { read=FSignerCertStoreB, write=FSetSignerCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SignerCertStoreType property denotes the type of the certificate store specified by SignerCertStore. If the store is password-protected, specify the password in SignerCertStorePassword.

SignerCertStore is used in conjunction with the SignerCertSubject property to specify client certificates. If SignerCertStore has a value, and SignerCertSubject or SignerCertEncoded is set, a search for a certificate is initiated. Please see the SignerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SignerCertStorePassword Property (JWT Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SignerCertStorePassword = { read=FSignerCertStorePassword, write=FSetSignerCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SignerCertStoreType Property (JWT Component)

The type of certificate store for this certificate.

Syntax

__property TipaJWTSignerCertStoreTypes SignerCertStoreType = { read=FSignerCertStoreType, write=FSetSignerCertStoreType };
enum TipaJWTSignerCertStoreTypes { cstUser=0, cstMachine=1, cstPFXFile=2, cstPFXBlob=3, cstJKSFile=4, cstJKSBlob=5, cstPEMKeyFile=6, cstPEMKeyBlob=7, cstPublicKeyFile=8, cstPublicKeyBlob=9, cstSSHPublicKeyBlob=10, cstP7BFile=11, cstP7BBlob=12, cstSSHPublicKeyFile=13, cstPPKFile=14, cstPPKBlob=15, cstXMLFile=16, cstXMLBlob=17, cstJWKFile=18, cstJWKBlob=19, cstSecurityKey=20, cstBCFKSFile=21, cstBCFKSBlob=22, cstPKCS11=23, cstAuto=99 };

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user.

Note: This store type is not available in Java.

1 (cstMachine)For Windows, this specifies that the certificate store is a machine store.

Note: This store type is not available in Java.

2 (cstPFXFile)The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates.

Note: This store type is only available in Java.

5 (cstJKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.

Note: This store type is only available in Java.

6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).

Note: This store type is only available in Java and .NET.

22 (cstBCFKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.

Note: This store type is only available in Java and .NET.

23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS#11 interface.

To use a security key, the necessary data must first be collected using the CertMgr component. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the SignerCertStore and set SignerCertStorePassword to the PIN.

Code Example. SSH Authentication with Security Key: certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Data Type

Integer

SignerCertSubjectAltNames Property (JWT Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SignerCertSubjectAltNames = { read=FSignerCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SignerCertThumbprintMD5 Property (JWT Component)

The MD5 hash of the certificate.

Syntax

__property String SignerCertThumbprintMD5 = { read=FSignerCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SignerCertThumbprintSHA1 Property (JWT Component)

The SHA-1 hash of the certificate.

Syntax

__property String SignerCertThumbprintSHA1 = { read=FSignerCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SignerCertThumbprintSHA256 Property (JWT Component)

The SHA-256 hash of the certificate.

Syntax

__property String SignerCertThumbprintSHA256 = { read=FSignerCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SignerCertUsage Property (JWT Component)

The text description of UsageFlags .

Syntax

__property String SignerCertUsage = { read=FSignerCertUsage };

Default Value

""

Remarks

The text description of SignerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

  • Digital Signature
  • Non-Repudiation
  • Key Encipherment
  • Data Encipherment
  • Key Agreement
  • Certificate Signing
  • CRL Signing
  • Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SignerCertUsageFlags Property (JWT Component)

The flags that show intended use for the certificate.

Syntax

__property int SignerCertUsageFlags = { read=FSignerCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SignerCertUsageFlags is a combination of the following flags:

0x80Digital Signature
0x40Non-Repudiation
0x20Key Encipherment
0x10Data Encipherment
0x08Key Agreement
0x04Certificate Signing
0x02CRL Signing
0x01Encipher Only

Please see the SignerCertUsage property for a text representation of SignerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SignerCertVersion Property (JWT Component)

The certificate's version number.

Syntax

__property String SignerCertVersion = { read=FSignerCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SignerCertSubject Property (JWT Component)

The subject of the certificate used for client authentication.

Syntax

__property String SignerCertSubject = { read=FSignerCertSubject, write=FSetSignerCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

FieldMeaning
CNCommon Name. This is commonly a hostname like www.server.com.
OOrganization
OUOrganizational Unit
LLocality
SState
CCountry
EEmail Address

If a field value contains a comma, it must be quoted.

Data Type

String

SignerCertEncoded Property (JWT Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SignerCertEncoded = { read=FSignerCertEncoded, write=FSetSignerCertEncoded };
__property DynamicArray<Byte> SignerCertEncodedB = { read=FSignerCertEncodedB, write=FSetSignerCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SignerCertStore and SignerCertSubject properties also may be used to specify a certificate.

When SignerCertEncoded is set, a search is initiated in the current SignerCertStore for the private key of the certificate. If the key is found, SignerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SignerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SigningAlgorithm Property (JWT Component)

The algorithm used when signing.

Syntax

__property TipaJWTSigningAlgorithms SigningAlgorithm = { read=FSigningAlgorithm, write=FSetSigningAlgorithm };
enum TipaJWTSigningAlgorithms { saHS256=0, saHS384=1, saHS512=2, saRS256=3, saRS384=4, saRS512=5, saES256=6, saES384=7, saES512=8, saPS256=9, saPS384=10, saPS512=11, saES256K=12, saNone=99 };

Default Value

saHS256

Remarks

This property specifies the algorithm to use when signing.

When signing with an HMAC algorithm Key must be specified. When an RSA or ECDSA algorithm is selected Certificate must be set before calling Sign and SignerCert must be set before calling Verify. The following values are supported:

AlgorithmDescriptionPrivate Key Location
0 (saHS256 - default) HMAC using SHA-256 Key
1 (saHS384) HMAC using SHA-384 Key
2 (saHS512) HMAC using SHA-512 Key
3 (saRS256) RSASSA-PKCS1-v1_5 using SHA-256 Certificate
4 (saRS384) RSASSA-PKCS1-v1_5 using SHA-384 Certificate
5 (saRS512) RSASSA-PKCS1-v1_5 using SHA-512 Certificate
6 (saPS256) RSASSA-PSS using SHA-256 and MGF1 with SHA-256 Certificate
7 (saPS384) RSASSA-PSS using SHA-384 and MGF1 with SHA-384 Certificate
8 (saPS512) RSASSA-PSS using SHA-512 and MGF1 with SHA-512 Certificate
9 (saES256) ECDSA using P-256 and SHA-256 Certificate
10 (saES384) ECDSA using P-384 and SHA-384 Certificate
11 (saES512) ECDSA using P-521 and SHA-512 Certificate
12 (saES256K) ECDSA using secp256k1 curve and SHA-256 Certificate
99 (saNone) None (unprotected) Not Applicable

Note: This setting is also applicable when StrictValidation is enabled before calling Verify.

Data Type

Integer

AddClaim Method (JWT Component)

Adds an new claim.

Syntax

void __fastcall AddClaim(String name, String value, int dataType);

Remarks

This method adds a claim to the existing claims. Use this method to add claims that are not already supported directly via properties.

The Name parameter defines the name of the claim. The Value parameter is the value, represented as a string. The JSON data type of the value is defined by the DataType parameter. Possible DataType values are:

  • 0 (Object)
  • 1 (Array)
  • 2 (String)
  • 3 (Number)
  • 4 (Bool)
  • 5 (Null)

AddHeaderParam Method (JWT Component)

Adds additional header parameters.

Syntax

void __fastcall AddHeaderParam(String name, String value, int dataType);

Remarks

This method is used to add additional header parameters before calling Encrypt or Sign.

The Name and Value parameters define the name and value of the parameter respectively. The DataType parameter specifies the JSON data type of the value. Possible values for DataType are:

  • 0 (Object)
  • 1 (Array)
  • 2 (String)
  • 3 (Number)
  • 4 (Bool)
  • 5 (Null)

Signing

To add additional parameters to the JOSE header use this method. For instance to create this header:

{
	"alg": "HS256",
	"crit": [
		"myheader"
	],
	"myheader": "testvalue"
}

The following code can be used:

byte[] key = new byte[] { 170, 171, 221, 209, 7, 181, 48, 178, 48, 118, 242, 132, 36, 218, 74, 140, 216, 165, 161, 70, 11, 42, 246, 205, 235, 231, 19, 48, 87, 141, 122, 10 }; //Sign the payload using HS256 Jwt jwt = new Jwt(); jwt.SigningAlgorithm = JwtSigningAlgorithms.saHS256; jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.AddHeaderParam("crit", "[\"myheader\"]", 1); jwt.AddHeaderParam("myheader", "testvalue", 2); jwt.KeyB = key; jwt.Sign(); string signedData = jwt.EncodedJWT;

Note: when calling Sign the component will automatically add some headers based on properties that are set.

Parameters Automatically Set:

Header ParamProperty
algAlgorithm
kidKeyId

Encrypting

To add additional parameters to the JOSE header use this method. For instance to create this header:

{
	"alg": "A256GCMKW",
	"enc": "A128CBC-HS256",
	"iv": "cPTXlBL7aMiv-Dnf",
	"tag": "r5tmS-tXmfFngrybpnnt5g",
	"crit": [
		"myheader"
	],
	"myheader": "testvalue"
}

The following code can be used:

byte[] key = new byte[] { 164, 60, 194, 0, 161, 189, 41, 38, 130, 89, 141, 164, 45, 170, 159, 209, 69, 137, 243, 216, 191, 131, 47, 250, 32, 107, 231, 117, 37, 158, 225, 234 }; Jwt jwt = new Jwt(); jwt.KeyB = key; jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.AddHeaderParam("crit", "[\"myheader\"]",1); jwt.AddHeaderParam("myheader", "testvalue",2); jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaA256GCMKW; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

Note: When calling Encrypt the component will automatically add headers based on the selected EncryptionAlgorithm and other properties that may be set.

Parameters Automatically Set:

Header ParamProperty
alg EncryptionAlgorithm
enc ContentEncryptionAlgorithm
kid KeyId
zip CompressionAlgorithm
p2c PBES2Count (PBES Algorithms Only)
apu PartyUInfo (ECDH Algorithms Only)
apv PartyVInfo (ECDH Algorithms Only)
iv N/A - Automatically Generated (AES Algorithms Only)
tag N/A - Automatically Generated (AES Algorithms Only)
p2s N/A - Automatically Generated (PBES Algorithms Only)
epk N/A - Automatically Generated (ECDH Algorithms Only)

Config Method (JWT Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Decrypt Method (JWT Component)

Decrypts the encoded JWT.

Syntax

void __fastcall Decrypt();

Remarks

This method decrypts the encoded JWT.

Before calling the Decrypt method set EncodedJWT to a valid compact serialized JWT string. For instance:

eyJhbGciOiJBMjU2S1ciLCJlbmMiOiJBMTI4Q0JDLUhTMjU2In0.4tcAnZJ00u4GY2kLOanPOL4CtvcfraZ8SIi6bOZ27qYBI2rHITPc1Q.c_9rCTdPn-saLCti2ZEyWQ.eLwqqo5BGNa70RlsvT-vTh7Gk0hjpJYY_9Zc39Vim_qEtjyMcxZygBpkfx9brzQr9rUbuiAhoCMXKip2-lKT6w.NkuLDPmWxWL4BaTWHWicIQ

The type and format of the private key depends on the algorithm used to encrypt the data. The following table summarizes the relationship:

AlgorithmPrivate Key Location
AESKey
RSA and ECDHCertificate
PBESKeyPassword
If the correct Key or Certificate is not known ahead of time the KeyId parameter of the RecipientInfo event may be used to identify the correct key.

If this method returns without error decryption was successful. If decryption fails then this method raises an exception. After calling this method the payload will be present in the Claim* properties and the HeaderParams property will contain the headers. Headers of the parsed message are also available through the HeaderParam event.

The following properties are applicable when calling this method:

After calling this method the following properties are populated:

Notes for AES Algorithms (A128KW, A192KW, A256KW, A128GCMKW, A192GCMKW, A256GCMKW)

To decrypt messages that use AES encryption Key must be set to a key of appropriate length for the algorithm. For instance a 256 bit key would be used for A256KW.

The key must be known by both parties in order for encryption and decryption to take place.

byte[] key = new byte[] { 164, 60, 194, 0, 161, 189, 41, 38, 130, 89, 141, 164, 45, 170, 159, 209, 69, 137, 243, 216, 191, 131, 47, 250, 32, 107, 231, 117, 37, 158, 225, 234 }; Jwt jwt = new Jwt(); jwt.KeyB = key; jwt.EncodedJWT = encryptedData; jwt.Decrypt(); string issuer = jwt.ClaimIssuer;

Notes for RSA Algorithms (RSA1_5, RSA-OEAP, RSA-OAEP-256)

The RSA based algorithms use asymmetric encryption. Encrypting is done with a public key and decryption is done with a private key. The certificate with private key must be specified. For instance:

Jwt jwt = new Jwt(); jwt.Certificate = new Certificate(CertStoreTypes.cstPFXFile, "..\\jwt.pfx", "password", "*"); jwt.EncodedJWT = encryptedData; jwt.Decrypt(); string issuer = jwt.ClaimIssuer;

Notes for ECDH Algorithms (ECDH-ES, ECDH-ES+A128KW, ECDH-ES+A192KW, ECDH-ES+A256KW)

ECDH algorithms require a valid ECC private key to decrypt the message. If the key was originally created with the ECC component the PEM encoded PrivateKey may be used directly with the Certificate property.

Jwt jwt = new Jwt(); jwt.Certificate = new Certificate(CertStoreTypes.cstPEMKeyFile, privKeyFile, "", "*"); jwt.EncodedJWT = encryptedData; jwt.Decrypt(); string issuer = jwt.ClaimIssuer;

To use an ECC private key created by other means the ECC component may be used to import the key parameters. Populate the Rx, Ry, and KB properties of the ECC component first to obtain the PEM formatted public key. For instance:

nsoftware.IPWorksEncrypt.Ecc ecc = new nsoftware.IPWorksEncrypt.Ecc(); byte[] x_bytes = new byte[] { 171, 170, 196, 151, 94, 196, 231, 12, 128, 232, 17, 61, 45, 105, 41, 209, 192, 187, 112, 242, 110, 178, 95, 240, 36, 55, 83, 171, 190, 176, 78, 13 }; byte[] y_bytes = new byte[] { 197, 75, 134, 245, 245, 28, 199, 9, 7, 117, 1, 54, 49, 178, 135, 252, 62, 89, 35, 180, 117, 80, 231, 23, 110, 250, 28, 124, 219, 253, 224, 156 }; byte[] k_bytes = new byte[] { 81, 65, 201, 24, 235, 249, 162, 148, 169, 150, 109, 181, 61, 238, 145, 122, 31, 30, 151, 94, 239, 90, 222, 217, 63, 103, 54, 2, 176, 232, 248, 168 }; ecc.Key.RxB = x_bytes; ecc.Key.RyB = y_bytes; ecc.Key.KB = k_bytes; string privKey = ecc.Key.PrivateKey; Jwt jwt = new Jwt(); jwt.Certificate = new Certificate(CertStoreTypes.cstPEMKeyBlob, privKey, "", "*"); jwt.EncodedJWT = encryptedData; jwt.Decrypt(); string issuer = jwt.ClaimIssuer;

Notes for PBES Algorithms (PBES2-HS256+A128KW, PBES2-HS384+A192KW, PBES2-HS512+A256KW

PBES algorithms derive a content encryption key from the KeyPassword property. Set KeyPassword to the shared secret.

Jwt jwt = new Jwt(); jwt.KeyPassword = "secret"; jwt.EncodedJWT = encryptedData; jwt.Decrypt(); string issuer = jwt.ClaimIssuer;

Notes for Direct Shared Keys

When Direct encryption is used the Key property must be set to a valid symmetric key that will be used directly by the ContentEncryptionAlgorithm. For instance:

byte[] key = new byte[] { 164, 60, 194, 0, 161, 189, 41, 38, 130, 89, 141, 164, 45, 170, 159, 209, 69, 137, 243, 216, 191, 131, 47, 250, 32, 107, 231, 117, 37, 158, 225, 234 }; Jwt jwt = new Jwt(); jwt.KeyB = key; jwt.EncodedJWT = encryptedData; jwt.Decrypt(); string issuer = jwt.ClaimIssuer;

Encrypt Method (JWT Component)

Encrypts the claims with the specified algorithms.

Syntax

void __fastcall Encrypt();

Remarks

This method encrypts the claims using the specified algorithms.

To create an encrypted JWT JSON Web Encryption (JWE) is performed by first generating a random key used to encrypt the content. The content encryption key is used to encrypt the content using the algorithm specified by ContentEncryptionAlgorithm. The content encryption key is then encrypted itself using the algorithm specified by EncryptionAlgorithm. The content encryption key is not directly exposed in the API as it is randomly generated.

After calling this method the compact serialized JWT is written to EncodedJWT. For instance:

eyJhbGciOiJBMjU2S1ciLCJlbmMiOiJBMTI4Q0JDLUhTMjU2In0.4tcAnZJ00u4GY2kLOanPOL4CtvcfraZ8SIi6bOZ27qYBI2rHITPc1Q.c_9rCTdPn-saLCti2ZEyWQ.eLwqqo5BGNa70RlsvT-vTh7Gk0hjpJYY_9Zc39Vim_qEtjyMcxZygBpkfx9brzQr9rUbuiAhoCMXKip2-lKT6w.NkuLDPmWxWL4BaTWHWicIQ

The component will use the values present in the Claim* properties to build the encoded JWT. After calling this method the EncodedJWT property will hold the compact serialized JWT. The following properties are applicable when calling this method:

Notes for AES Algorithms (A128KW, A192KW, A256KW, A128GCMKW, A192GCMKW, A256GCMKW)

When EncryptionAlgorithm is set to a AES algorithm Key must be set to a key of appropriate length for the algorithm. For instance a 256 bit key would be used for A256KW.

To use an existing AES key provide the bytes to the Key property. For instance:

byte[] key = new byte[] { 164, 60, 194, 0, 161, 189, 41, 38, 130, 89, 141, 164, 45, 170, 159, 209, 69, 137, 243, 216, 191, 131, 47, 250, 32, 107, 231, 117, 37, 158, 225, 234 }; //Encrypt the payload using A256KW Jwt jwt = new Jwt(); jwt.KeyB = key; jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaA256KW; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

Notes for RSA Algorithms (RSA1_5, RSA-OEAP, RSA-OAEP-256)

The RSA based algorithms use asymmetric encryption. Encrypting is done with a public key and decryption is done with a private key. The public certificate should be in PEM (base64) format. For instance:

Jwt jwt = new Jwt(); jwt.Certificate = new Certificate("..\\recipient.cer"); jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaRSA_OAEP; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

Notes for ECDH Algorithms (ECDH-ES, ECDH-ES+A128KW, ECDH-ES+A192KW, ECDH-ES+A256KW)

ECDH algorithms require a valid ECC public key to encrypt the message. If the key was originally created with the ECC component the PEM encoded PublicKey may be used directly with the Certificate property. An example PEM encoded public certificate created by the ECC component:

-----BEGIN PUBLIC KEY-----
MIIBMjCB7AYHKoZIzj0CATCB4AIBATAsBgcqhkjOPQEBAiEA/////wAAAAEAAAAAAAAAAAAA
AAD///////////////8wRAQg/////wAAAAEAAAAAAAAAAAAAAAD///////////////wEIFrG
NdiqOpPns+u9VXaYhrxlHQawzFOw9jvOPD4n0mBLBEEEaxfR8uEsQkf4vOblY6RA8ncDfYEt
6zOg9KE5RdiYwpZP40Li/hp/m47n60p8D54WK84zV2sxXs7LtkBoN79R9QIhAP////8AAAAA
//////////+85vqtpxeehPO5ysL8YyVRAgEBA0EEIC5rbLp11Mnz6cBXLLriaDIov3rm8RAY
x/OR0bOKiff0cQy+sLVaxjseqFk/+Xvl4ORSv5Z6HdHv5GyEpA0UoA==
-----END PUBLIC KEY-----

Jwt jwt = new Jwt(); jwt.Certificate = new Certificate(CertStoreTypes.cstPublicKeyFile, pubKeyFile, "", "*"); jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaECDH_ES_A256KW; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

To use an ECC public key created by other means the ECC component may be used to import the key parameters. Populate the Rx and Ry properties of the ECC component first to obtain the PEM formatted public key. For instance:

byte[] x_bytes = new byte[] { 171, 170, 196, 151, 94, 196, 231, 12, 128, 232, 17, 61, 45, 105, 41, 209, 192, 187, 112, 242, 110, 178, 95, 240, 36, 55, 83, 171, 190, 176, 78, 13 }; byte[] y_bytes = new byte[] { 197, 75, 134, 245, 245, 28, 199, 9, 7, 117, 1, 54, 49, 178, 135, 252, 62, 89, 35, 180, 117, 80, 231, 23, 110, 250, 28, 124, 219, 253, 224, 156 }; nsoftware.IPWorksEncrypt.Ecc ecc = new nsoftware.IPWorksEncrypt.Ecc(); ecc.Key.RxB = x_bytes; ecc.Key.RyB = y_bytes; string pubKey = ecc.Key.PublicKey; Jwt jwt = new Jwt(); jwt.Certificate = new Certificate(CertStoreTypes.cstPublicKeyFile, pubKey, "", "*"); jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaECDH_ES_A256KW; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

Notes for PBES Algorithms (PBES2-HS256+A128KW, PBES2-HS384+A192KW, PBES2-HS512+A256KW

PBES algorithms derive a content encryption key from the KeyPassword property. Set KeyPassword to a shared secret.

Jwt jwt = new Jwt(); jwt.KeyPassword = "secret"; jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaPBES2_HS512_A256KW; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

Notes for Direct Shared Keys

When EncryptionAlgorithm is set to Direct the Key property must be set to a valid symmetric key that will be used directly by the ContentEncryptionAlgorithm. In this case a content encryption key is not generated randomly, the Key is used instead. The length of the specified Key must be valid for the selected ContentEncryptionAlgorithm. For instance:

byte[] key = new byte[] { 164, 62, 191, 60, 161, 189, 41, 38, 130, 89, 141, 164, 45, 170, 159, 209, 69, 137, 243, 216, 191, 131, 47, 250, 32, 107, 231, 117, 37, 158, 225, 234 }; Jwt jwt = new Jwt(); jwt.EncryptionAlgorithm = JwtEncryptionAlgorithms.eaDir; jwt.ContentEncryptionAlgorithm = JwtContentEncryptionAlgorithms.ceaA256GCM; jwt.KeyB = key; jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.Encrypt(); string encryptedData = jwt.EncodedJWT;

Parse Method (JWT Component)

Parses the encoded JWT.

Syntax

void __fastcall Parse();

Remarks

This method parses, but does not verify the encoded JWT.

Take care when using this method as no verification or decryption is performed. This method may be helpful in cases where only header information is desired.

If verification or decryption is desired, use Verify or Decrypt instead. It is not necessary to call this method before calling Verify or Decrypt. Verify or Decrypt will both parse and decrypt the message.

When calling this method the headers are parsed. The HeaderParam and RecipientInfo events will fire and the HeaderParams property will be populated.

If the message is signed (not encrypted) the claims will also be parsed and the Claim* properties will be populated.

Reset Method (JWT Component)

Resets the component properties.

Syntax

void __fastcall Reset();

Remarks

This method resets all message and key properties to their default values.

Sign Method (JWT Component)

Signs the payload with the specified algorithm.

Syntax

void __fastcall Sign();

Remarks

This method signs the claims specified by the Claim* properties with the specified SigningAlgorithm.

Before calling the Sign method set SigningAlgorithm to the algorithm which will be used to sign the message. The result of signing is a compact serialized JWT string. For instance:

eyJhbGciOiJIUzI1NiJ9.eyJhdWQiOlsiYXVkaWVuY2UiXSwiaXNzIjoiaXNzdWVyIn0.mlFETSma4WUcUSjNSUWA1n9QBcQHCkHN-y4zeBsCVqI

The component will use the values present in the Claim* properties to build the encoded JWT. After calling this method the EncodedJWT property will hold the compact serialized JWT. The following properties are applicable when calling this method:

Notes for HMAC Algorithms (HS256, HS384, HS512)

When SigningAlgorithm is set to a HMAC algorithm Key must be set to a key of appropriate length for the algorithm. The Key should be the same number of bits as the algorithm being used. For instance a 256 bit key would be used for HS256.

The key must be known by both parties in order for signing and verification to take place. To use an existing HMAC key provide the bytes to the Key property. For instance:

//HMAC SHA-256 Key byte[] key = new byte[] { 170, 171, 221, 209, 7, 181, 48, 178, 48, 118, 242, 132, 36, 218, 74, 140, 216, 165, 161, 70, 11, 42, 246, 205, 235, 231, 19, 48, 87, 141, 122, 10 }; //Sign the payload using HS256 Jwt jwt = new Jwt(); jwt.SigningAlgorithm = JwtSigningAlgorithms.saHS256; jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.KeyB = key; jwt.Sign(); string signedData = jwt.EncodedJWT;

Notes for RSA Algorithms (RS256, RS384, RS512, PS256, PS384, PS512)

The RSA based algorithms use asymmetric encryption. Signing is done with a private key and verification is done with a public key. The private key may be in PFX or PEM format.

Jwt jwt = new Jwt(); jwt.SigningAlgorithm = JwtSigningAlgorithms.saRS256; jwt.Certificate = new Certificate(CertStoreTypes.cstPFXFile, "..\\jwt.pfx", "test", "*"); jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.Sign(); string signedMessage = jwt.EncodedJWT;

Notes for ECDSA Algorithms (ES256, ES384, ES512)

ECDSA algorithms require a valid ECC private key in order to sign data. The Certificate property should be set to a certificate with an ECC key. The CertMgr component can be used to create a certificate with an ECC key.

//Create an ECC key with SHA-256 Certmgr mgr = new Certmgr(); mgr.Config("CertPublicKeyAlgorithm=ECDSA_P256"); mgr.CertStoreType = CertStoreTypes.cstPEMKeyFile; mgr.CertStore = "C:\\temp\\ecdsa.pem"; mgr.CreateCertificate("CN=ecdsa", 123); //Sign the payload using ES256 Jwt jwt = new Jwt(); jwt.SigningAlgorithm = JwtSigningAlgorithms.saES256; jwt.Certificate = new Certificate(CertStoreTypes.cstPEMKeyFile, "C:\\temp\\ecdsa.pem", "", "*"); jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.Sign(); string signedMessage = jwt.EncodedJWT;

Notes for Unsecured (none)

To create a JWS token without any security set SigningAlgorithm to jwtNone.

Jwt jwt = new Jwt(); jwt.SigningAlgorithm = JwtSigningAlgorithms.saNone; jwt.ClaimAudience = "audience"; jwt.ClaimIssuer = "issuer"; jwt.ClaimExp = "1498508071"; jwt.Sign(); string unsecuredMessage = jwt.EncodedJWT;

Verify Method (JWT Component)

Verifies the signature of the encoded JWT.

Syntax

void __fastcall Verify();

Remarks

This method verifies the signature of the encoded JWT.

Before calling the Verify method set EncodedJWT to a valid compact serialized JWT. For instance:

eyJhbGciOiJIUzI1NiJ9.eyJhdWQiOlsiYXVkaWVuY2UiXSwiaXNzIjoiaXNzdWVyIn0.mlFETSma4WUcUSjNSUWA1n9QBcQHCkHN-y4zeBsCVqI

The Key or SignerCert properties should be set to the HMAC key or public certificate respectively. If the correct Key or SignerCert is not known ahead of time the KeyId parameter of the SignerInfo event may be used to identify the correct key.

If this method returns without error verification was successful. If verification fails then this method raises an exception. After calling this method the claims will be parsed and the Claim* properties will be populated. The the HeaderParams property will contain the headers. Headers of the parsed message are also available through the HeaderParam event.

The following properties are applicable when calling this method:

After calling this method the following properties are populated:

Notes for HMAC Algorithms (HS256, HS384, HS512)

When verifying a message originally signed with a HMAC algorithm Key must be set to the same key used during signing. The key must be known by both parties in order for signing and verification to take place.

byte[] key = new byte[] { 170, 171, 221, 209, 7, 181, 48, 178, 48, 118, 242, 132, 36, 218, 74, 140, 216, 165, 161, 70, 11, 42, 246, 205, 235, 231, 19, 48, 87, 141, 122, 10 }; Jwt jwt = new Jwt(); jwt.KeyB = key; jwt.EncodedJWT = signedData; jwt.Verify(); string issuer = jwt.ClaimIssuer;

Notes for RSA Algorithms (RS256, RS384, RS512, PS256, PS384, PS512)

The RSA based algorithms use asymmetric encryption. Signing is done with a private key and verification is done with a public key. The public key is typically in PEM format.

Jwt jwt = new Jwt(); jwt.SignerCert = new Certificate("..\\jwt.cer"); jwt.EncodedJWT = signedData; jwt.Verify(); string issuer = jwt.ClaimIssuer;

Notes for ECDSA Algorithms (ES256, ES384, ES512)

ECDSA algorithms require a valid ECC public key to verify the message. The PEM encoded public key may be used directly with the Certificate property. An example PEM encoded public certificate created by the CertMgr component:

-----BEGIN CERTIFICATE-----
MIIBETCBtaADAgECAgF7MAwGCCqGSM49BAMCBQAwEDEOMAwGA1UEAxMFZWNkc2EwHhcNMjMw
NzAzMTcwMjU3WhcNMjQwNzAyMTcwMjU3WjAQMQ4wDAYDVQQDEwVlY2RzYTBZMBMGByqGSM49
AgEGCCqGSM49AwEHA0IABGJv251JI7ITcq+fac9Z2yYkhTLSRhWGzBw1wEJZbs/8AZbVmvcy
4BzKSZEaTfBsCHIt3FLNgRLdugI+B65eQDYwDAYIKoZIzj0EAwIFAANJADBGAiEAzmH5LKKn
r4iy9kJvIlCslpcBHM/8k0XQaj13Zwhm2ocCIQD/cSiC4EuqRkxT4IKET7ko3iI5YUS+J5W5
/0xnxxxIpQ==
-----END CERTIFICATE-----

Jwt jwt = new Jwt(); jwt.SignerCert = new Certificate(CertStoreTypes.cstPublicKeyBlob, pubKey, "", "*"); jwt.EncodedJWT = signedData; jwt.Verify(); string issuer = jwt.ClaimIssuer;

Notes for Unsecured (none)

To parse a JWS token without any security call the Sign method without setting the Key or Certificate properties.

Jwt jwt = new Jwt(); jwt.EncodedJWT = signedData; jwt.Verify(); string issuer = jwt.ClaimIssuer;

ClaimInfo Event (JWT Component)

Fires once for each claim.

Syntax

typedef struct {
  String Name;
  String Value;
  int DataType;
} TipaJWTClaimInfoEventParams;
typedef void __fastcall (__closure *TipaJWTClaimInfoEvent)(System::TObject* Sender, TipaJWTClaimInfoEventParams *e);
__property TipaJWTClaimInfoEvent OnClaimInfo = { read=FOnClaimInfo, write=FOnClaimInfo };

Remarks

When Decrypt, Verify or Parse is called this event will fire once for each claim in the JWT.

Name is the name of the claim.

Value is the value of the claim.

DataType specifies the JSON data type of the value. Possible values are:

  • 0 (Object)
  • 1 (Array)
  • 2 (String)
  • 3 (Number)
  • 4 (Bool)
  • 5 (Null)

Error Event (JWT Component)

Fired when information is available about errors during data delivery.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TipaJWTErrorEventParams;
typedef void __fastcall (__closure *TipaJWTErrorEvent)(System::TObject* Sender, TipaJWTErrorEventParams *e);
__property TipaJWTErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

HeaderParam Event (JWT Component)

Fires once for each JOSE header parameter.

Syntax

typedef struct {
  String Name;
  String Value;
  int DataType;
} TipaJWTHeaderParamEventParams;
typedef void __fastcall (__closure *TipaJWTHeaderParamEvent)(System::TObject* Sender, TipaJWTHeaderParamEventParams *e);
__property TipaJWTHeaderParamEvent OnHeaderParam = { read=FOnHeaderParam, write=FOnHeaderParam };

Remarks

When Decrypt, Verify or Parse is called this event will fire once for each JOSE header parameter.

Name is the name of the parameter.

Value is the value of the parameter.

DataType specifies the JSON data type of the value. Possible values are:

  • 0 (Object)
  • 1 (Array)
  • 2 (String)
  • 3 (Number)
  • 4 (Bool)
  • 5 (Null)

RecipientInfo Event (JWT Component)

Fired with information about the recipient key of the encrypted message.

Syntax

typedef struct {
  String KeyId;
  String Algorithm;
} TipaJWTRecipientInfoEventParams;
typedef void __fastcall (__closure *TipaJWTRecipientInfoEvent)(System::TObject* Sender, TipaJWTRecipientInfoEventParams *e);
__property TipaJWTRecipientInfoEvent OnRecipientInfo = { read=FOnRecipientInfo, write=FOnRecipientInfo };

Remarks

This event fires with information about the key used to encrypt the data. This may be used to help identify the Key or Certificate properties to load in order to decrypt the message. This event fires when Decrypt or Parse is called.

KeyId is the Id of the key as supplied by the entity that created the message. This may be empty.

Algorithm is the encryption algorithm used to encrypt the data.

SignerInfo Event (JWT Component)

Fires with information about the signature.

Syntax

typedef struct {
  String KeyId;
  String Algorithm;
} TipaJWTSignerInfoEventParams;
typedef void __fastcall (__closure *TipaJWTSignerInfoEvent)(System::TObject* Sender, TipaJWTSignerInfoEventParams *e);
__property TipaJWTSignerInfoEvent OnSignerInfo = { read=FOnSignerInfo, write=FOnSignerInfo };

Remarks

This event fires with information about the signature. This may be used to help identify the Key or Certificate properties to load in order to verify the signature. This event fires when Verify or Parse is called.

KeyId is the Id of the key as supplied by the signer that created the message. This may be empty.

Algorithm is the signature algorithm used to sign the message.

Config Settings (JWT Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

JWT Config Settings

AllowedSigningAlgorithms:   Allowed signing algorithms when StrictValidation is set to True.

This setting specifics a comma separated list of algorithms that are allowed when StrictValidation is set to true. This allows multiple signing algorithms to be considered acceptable during validation. This setting is only applicable when StrictValidation is set to true. Possible values:

  • HS256
  • HS384
  • HS512
  • RS256
  • RS384
  • RS512
  • ES256
  • ES384
  • ES512
  • PS256
  • PS384
  • PS512

Example value: HS512,HS256.

AudienceDelimiter:   Defines the character to separate audience values.

This setting specifies the character to used to separate multiple audience values. ClaimAudience may contain multiple values. When multiple values are present they will be separated by this character. The default value is ;.

When setting ClaimAudience that contains multiple audiences specify multiple value separated by the character set here. For instance:

jwt.ClaimAudience = "aud1;aud2";

CompressionAlgorithm:   The compression algorithm to use.

This setting specifies the compression algorithm to use (if any). If set the content will be compressed using the specified algorithm. Possible values are:

  • 0 (none - default)
  • 1 (deflate)
ExpectedAudience:   The expected audience claim.

This setting specifies the expected audience claim. When set prior to calling the Verify method, the component will compare the audience claim from the EncodedJWT with this value.

ExpectedExp:   The expected expiration time claim.

This setting specifies the expected expiration time claim. When set prior to calling the Verify method, the component will compare the expiration time claim from the EncodedJWT with this value.

ExpectedIssuedAt:   The expected time at which the JWT was issued.

This setting specifies the expected issued at claim. When set prior to calling the Verify method, the component will compare the issued at claim from the EncodedJWT with this value.

ExpectedIssuer:   The expected issuer of the JWT.

This setting specifies the expected issuer of the JWT. When set prior to calling the Verify method, the component will compare the issuer of the EncodedJWT with this value.

ExpectedJWTId:   The expected unique identifier for the JWT.

This setting specifies the expected ID of the JWT. When set prior to calling the Verify method, the component will compare the JWT ID of the EncodedJWT with this value.

ExpectedNotBefore:   The expected claim identifying the time before which the JWT is invalid.

This setting specifies the expected not before claim of the JWT. When set prior to calling the Verify method, the component will compare the not before of claim of the EncodedJWT with this value.

ExpectedSubject:   The expected subject identifying the principal of the JWT.

This setting specifies the expected subject claim of the JWT. When set prior to calling the Verify method, the component will compare the subject claim of the EncodedJWT with this value.

IncludeCertificateFormat:   The certificate values to include in the signed message (if any).

This setting specifies whether information about the Certificate is included in the signed message. When specified, the value here determines the format of the included certificate information. The certificate information is included as a standard JWS header parameter.

Multiple formats may be included in the signed message. The value specified should be the binary 'OR' of one or more of the following values:

Value Description JWS Header Param
0 (0x00 - default) None
1 (0x01) X.509 Certificate Chain x5c
2 (0x02) X.509 Certificate SHA-1 Thumbprint (Base64-URL encoded) x5t
4 (0x04) X.509 Certificate SHA-256 Thumbprint (Base64-URL encoded) x5t#S256

Note: When including the certificate chain (0x01) the public certificate of Certificate property will automatically be included. IssuerCerts may also be set to the public issuer certificates that will be used when building the chain to include.

For instance, to include both the certificate chain and SHA-256 thumbprint of the Certificate set this to 5.

InputMessage:   The raw input to process.

This setting optionally specifies the pay payload to process. When calling Sign or Encrypt input is taken from this setting if specified. If a value is set here the Claim* properties are ignored.

IsEncrypted:   Indicates whether the EncodedJWT is encrypted.

This setting may be queried after calling Parse to determine if the EncodedJWT is encrypted.

IsSigned:   Indicates whether the EncodedJWT is signed.

This setting may be queried after calling Parse to determine if the EncodedJWT is signed.

IssuerCerts:   A collection of issuer certificates used with IncludeCertificateFormat.

This setting optionally specifies one or more issuer certificates that may be used by the component when IncludeCertificateFormat is specified. Note that the issuer certificates specified here are used as a store of potential issuer certificates. At runtime the component will inspect the Certificate value and add the relevant issuer certificates that are present in this property.

The format of the value must be one or more PEM encoded certificates with headers and footers. For instance to include 2 issuer certificates the value may be:

-----BEGIN CERTIFICATE-----
MIIBujCCASOgAwIBAgICA+kwDQYJKoZIhvcNAQELBQAwHTEbMBkGA1UEAxMSbnVuaXRDZXJ0
Q2hhaW5Sb290MCAXDTE4MTAxNTA5MDAxN1oYDzIxMTgwOTIxMDkwMDE3WjAmMSQwIgYDVQQD
...
Tr+wi0ouNo7ifWRcE83Z15PhfGn1nkfxMYj4rya5n+V0RVVcgFUdiolCI5o/sYq503a7kH16
JSF5Zw+TiMz/COM8R94=
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIBsTCCARqgAwIBAgICA+gwDQYJKoZIhvcNAQELBQAwHTEbMBkGA1UEAxMSbnVuaXRDZXJ0
Q2hhaW5Sb290MCAXDTE4MTAxNTA5MDAxN1oYDzIxMTgwOTIxMDkwMDE3WjAdMRswGQYDVQQD
...
5u2K9PuJ3ySgL7AvYsqbB/e0/gw8j253SOU+gNTpFahOJsLGEJ43CRtaowkLnWEzs+OPnRfw
iQmqruw=
-----END CERTIFICATE-----

KeyEncoding:   The encoding of the Key value.

This setting specifies the encoding that has been applied to the Key. value prior to providing it to the component. The Key is typically represented as an array of bytes, however in some cases the key value may have been encoded. As a matter of convenience the component will accept the key with an encoding already applied. The component will decode the key value according the to the value specified here before processing. Possible values are:

  • 0 (none - default)
  • 1 (Base64)
  • 2 (Hex)
  • 3 (Base64URL)

OutputMessage:   The raw output of the operation.

After calling Verify or Decrypt this holds the raw JSON payload. This may be useful for debugging or logging purposes when the JSON payload is desired.

PartyUInfo:   Information about the producer of the message.

This setting may optionally be set when EncryptionAlgorithm is set to an ECDH algorithm before calling Encrypt. When calling Decrypt this setting is populated and also accessible from within the RecipientInfo event. The value may be any string. To specify a base64url encoded value directly prefix the string with [b64]. For instance the following lines both set the same value:

jwe.Config("PartyUInfo=Alice"); jwe.Config("PartyUInfo=[b64]QWxpY2U="); //Equivalent to above line

PartyVInfo:   Information about the recipient of the message.

This setting may optionally be set when EncryptionAlgorithm is set to an ECDH algorithm before calling Encrypt. When calling Decrypt this setting is populated and also accessible from within the RecipientInfo event. The value may be any string. To specify a base64url encoded value directly prefix the string with [b64]. For instance the following lines both set the same value:

jwe.Config("PartyUInfo=Bob"); jwe.Config("PartyUInfo=[b64]Qm9i"); //Equivalent to above line

PBES2Count:   The PBKDF2 iteration count.

This setting specifies the PBDKF2 iteration count. A minimum value of 1000 is recommended. The default value is 1000.

This setting is only applicable when EncryptionAlgorithm is set to a PBES algorithm.

PBES2SaltLength:   The salt input value length.

This setting specifies the length in bytes of the salt input value, which is used as part of the PBKDF2 salt value. The default value is 16.

This setting is only applicable when EncryptionAlgorithm is set to a PBES algorithm.

RawHeader:   Holds the raw JOSE header.

This setting may be queried after calling Sign or Verify to obtain the raw JOSE header. This returns a JSON string like:

{"alg":"ES384","kid":"myKeyId"}

StrictValidation:   Requires specific algorithms when processing.

If set to True the component will validate that the algorithm used in the JWT matches the values specified in EncryptionAlgorithm, ContentEncryptionAlgorithm, and SigningAlgorithm. This is applicable when calling Decrypt and Verify.

By default this is False and the algorithms are read automatically from the encoded JWT.

Base Config Settings

BuildInfo:   Information about the product's build.

When queried, this setting will return a string containing information about the product's build.

CodePage:   The system code page used for Unicode to Multibyte translations.

The default code page is Unicode UTF-8 (65001).

The following is a list of valid code page identifiers:

IdentifierName
037IBM EBCDIC - U.S./Canada
437OEM - United States
500IBM EBCDIC - International
708Arabic - ASMO 708
709Arabic - ASMO 449+, BCON V4
710Arabic - Transparent Arabic
720Arabic - Transparent ASMO
737OEM - Greek (formerly 437G)
775OEM - Baltic
850OEM - Multilingual Latin I
852OEM - Latin II
855OEM - Cyrillic (primarily Russian)
857OEM - Turkish
858OEM - Multilingual Latin I + Euro symbol
860OEM - Portuguese
861OEM - Icelandic
862OEM - Hebrew
863OEM - Canadian-French
864OEM - Arabic
865OEM - Nordic
866OEM - Russian
869OEM - Modern Greek
870IBM EBCDIC - Multilingual/ROECE (Latin-2)
874ANSI/OEM - Thai (same as 28605, ISO 8859-15)
875IBM EBCDIC - Modern Greek
932ANSI/OEM - Japanese, Shift-JIS
936ANSI/OEM - Simplified Chinese (PRC, Singapore)
949ANSI/OEM - Korean (Unified Hangul Code)
950ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC)
1026IBM EBCDIC - Turkish (Latin-5)
1047IBM EBCDIC - Latin 1/Open System
1140IBM EBCDIC - U.S./Canada (037 + Euro symbol)
1141IBM EBCDIC - Germany (20273 + Euro symbol)
1142IBM EBCDIC - Denmark/Norway (20277 + Euro symbol)
1143IBM EBCDIC - Finland/Sweden (20278 + Euro symbol)
1144IBM EBCDIC - Italy (20280 + Euro symbol)
1145IBM EBCDIC - Latin America/Spain (20284 + Euro symbol)
1146IBM EBCDIC - United Kingdom (20285 + Euro symbol)
1147IBM EBCDIC - France (20297 + Euro symbol)
1148IBM EBCDIC - International (500 + Euro symbol)
1149IBM EBCDIC - Icelandic (20871 + Euro symbol)
1200Unicode UCS-2 Little-Endian (BMP of ISO 10646)
1201Unicode UCS-2 Big-Endian
1250ANSI - Central European
1251ANSI - Cyrillic
1252ANSI - Latin I
1253ANSI - Greek
1254ANSI - Turkish
1255ANSI - Hebrew
1256ANSI - Arabic
1257ANSI - Baltic
1258ANSI/OEM - Vietnamese
1361Korean (Johab)
10000MAC - Roman
10001MAC - Japanese
10002MAC - Traditional Chinese (Big5)
10003MAC - Korean
10004MAC - Arabic
10005MAC - Hebrew
10006MAC - Greek I
10007MAC - Cyrillic
10008MAC - Simplified Chinese (GB 2312)
10010MAC - Romania
10017MAC - Ukraine
10021MAC - Thai
10029MAC - Latin II
10079MAC - Icelandic
10081MAC - Turkish
10082MAC - Croatia
12000Unicode UCS-4 Little-Endian
12001Unicode UCS-4 Big-Endian
20000CNS - Taiwan
20001TCA - Taiwan
20002Eten - Taiwan
20003IBM5550 - Taiwan
20004TeleText - Taiwan
20005Wang - Taiwan
20105IA5 IRV International Alphabet No. 5 (7-bit)
20106IA5 German (7-bit)
20107IA5 Swedish (7-bit)
20108IA5 Norwegian (7-bit)
20127US-ASCII (7-bit)
20261T.61
20269ISO 6937 Non-Spacing Accent
20273IBM EBCDIC - Germany
20277IBM EBCDIC - Denmark/Norway
20278IBM EBCDIC - Finland/Sweden
20280IBM EBCDIC - Italy
20284IBM EBCDIC - Latin America/Spain
20285IBM EBCDIC - United Kingdom
20290IBM EBCDIC - Japanese Katakana Extended
20297IBM EBCDIC - France
20420IBM EBCDIC - Arabic
20423IBM EBCDIC - Greek
20424IBM EBCDIC - Hebrew
20833IBM EBCDIC - Korean Extended
20838IBM EBCDIC - Thai
20866Russian - KOI8-R
20871IBM EBCDIC - Icelandic
20880IBM EBCDIC - Cyrillic (Russian)
20905IBM EBCDIC - Turkish
20924IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol)
20932JIS X 0208-1990 & 0121-1990
20936Simplified Chinese (GB2312)
21025IBM EBCDIC - Cyrillic (Serbian, Bulgarian)
21027Extended Alpha Lowercase
21866Ukrainian (KOI8-U)
28591ISO 8859-1 Latin I
28592ISO 8859-2 Central Europe
28593ISO 8859-3 Latin 3
28594ISO 8859-4 Baltic
28595ISO 8859-5 Cyrillic
28596ISO 8859-6 Arabic
28597ISO 8859-7 Greek
28598ISO 8859-8 Hebrew
28599ISO 8859-9 Latin 5
28605ISO 8859-15 Latin 9
29001Europa 3
38598ISO 8859-8 Hebrew
50220ISO 2022 Japanese with no halfwidth Katakana
50221ISO 2022 Japanese with halfwidth Katakana
50222ISO 2022 Japanese JIS X 0201-1989
50225ISO 2022 Korean
50227ISO 2022 Simplified Chinese
50229ISO 2022 Traditional Chinese
50930Japanese (Katakana) Extended
50931US/Canada and Japanese
50933Korean Extended and Korean
50935Simplified Chinese Extended and Simplified Chinese
50936Simplified Chinese
50937US/Canada and Traditional Chinese
50939Japanese (Latin) Extended and Japanese
51932EUC - Japanese
51936EUC - Simplified Chinese
51949EUC - Korean
51950EUC - Traditional Chinese
52936HZ-GB2312 Simplified Chinese
54936Windows XP: GB18030 Simplified Chinese (4 Byte)
57002ISCII Devanagari
57003ISCII Bengali
57004ISCII Tamil
57005ISCII Telugu
57006ISCII Assamese
57007ISCII Oriya
57008ISCII Kannada
57009ISCII Malayalam
57010ISCII Gujarati
57011ISCII Punjabi
65000Unicode UTF-7
65001Unicode UTF-8
The following is a list of valid code page identifiers for Mac OS only:
IdentifierName
1ASCII
2NEXTSTEP
3JapaneseEUC
4UTF8
5ISOLatin1
6Symbol
7NonLossyASCII
8ShiftJIS
9ISOLatin2
10Unicode
11WindowsCP1251
12WindowsCP1252
13WindowsCP1253
14WindowsCP1254
15WindowsCP1250
21ISO2022JP
30MacOSRoman
10UTF16String
0x90000100UTF16BigEndian
0x94000100UTF16LittleEndian
0x8c000100UTF32String
0x98000100UTF32BigEndian
0x9c000100UTF32LittleEndian
65536Proprietary

LicenseInfo:   Information about the current license.

When queried, this setting will return a string containing information about the license this instance of a component is using. It will return the following information:

  • Product: The product the license is for.
  • Product Key: The key the license was generated from.
  • License Source: Where the license was found (e.g., RuntimeLicense, License File).
  • License Type: The type of license installed (e.g., Royalty Free, Single Server).
  • Last Valid Build: The last valid build number for which the license will work.
MaskSensitiveData:   Whether sensitive data is masked in log messages.

In certain circumstances it may be beneficial to mask sensitive data, like passwords, in log messages. Set this to true to mask sensitive data. The default is true.

This setting only works on these components: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.

UseFIPSCompliantAPI:   Tells the component whether or not to use FIPS certified APIs.

When set to true, the component will utilize the underlying operating system's certified APIs. Java editions, regardless of OS, utilize Bouncy Castle Federal Information Processing Standards (FIPS), while all other Windows editions make use of Microsoft security libraries.

FIPS mode can be enabled by setting the UseFIPSCompliantAPI configuration setting to true. This is a static setting that applies to all instances of all components of the toolkit within the process. It is recommended to enable or disable this setting once before the component has been used to establish a connection. Enabling FIPS while an instance of the component is active and connected may result in unexpected behavior.

For more details, please see the FIPS 140-2 Compliance article.

Note: This setting is applicable only on Windows.

Note: Enabling FIPS compliance requires a special license; please contact sales@nsoftware.com for details.

UseInternalSecurityAPI:   Whether or not to use the system security libraries or an internal implementation.

When set to false, the component will use the system security libraries by default to perform cryptographic functions where applicable.

Setting this configuration setting to true tells the component to use the internal implementation instead of using the system security libraries.

This setting is set to false by default on all platforms.

Trappable Errors (JWT Component)

JWT Errors

301   EncodedJWT is not set. The input is not valid.
302   Failed to parse claims. See error message for details.
303   Claim is not within its validity period.
304   Failed to verify an expected claim value. See error message for details.

JWS Errors

201   Invalid JWS value. Not recognized as a compact serialized JWS string.
202   Signature verification failed.
203   Key must be specified before attempting this operation.
204   The specified key is too short for the selected algorithm.
205   Certificate must be specified before attempting this operation.
206   Unsupported algorithm.
207   OutputFile already exists and Overwrite is False.
208   Error writing data. See error message for details.

JWE Errors

101   Invalid JWE message. See message for details.
102   Unsupported compression algorithm.
103   Unsupported content encryption algorithm.
104   Unsupported key encryption algorithm.
105   A required header for decryption was not found. See message for details.
106   The specified key is not a valid length for the algorithm.
107   OutputFile already exists and Overwrite is False.
108   KeyPassword must be set for the selected algorithm.
109   Key must be set for the selected algorithm.
110   Certificate must be set for the selected algorithm.
111   A header parameter defined to be critical is not present.
112   Error writing data.
113   Error reading data. Check message for details.
114   Error encrypting. Check message for details.
115   Error decrypting. Check message for details.