RADIUS Component

Properties   Methods   Events   Config Settings   Errors  

The RADIUS component provides an easy way to authenticate users.

Syntax

TipaRADIUS

Remarks

The RADIUS component implements support for Remote Authentication Dial In User Service (RADIUS). Communication can be performed over UDP or DTLS, which is controlled by the value of the SSLEnabled property.

Authentication

The component can be used to authenticate users with a RADIUS server. To begin set the following properties:

• RemoteHost
• RemotePort (optional)
• User
• Password
• SharedSecret

The AuthMechanism property may be set to specify the authentication mechanism used.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AttrCount Property (RADIUS Component)

The number of records in the Attr arrays.

Syntax

__property int AttrCount = { read=FAttrCount, write=FSetAttrCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• AttrName
• AttrType
• AttrValue

The array indices start at 0 and end at AttrCount - 1.

This property is not available at design time.

Data Type

Integer

AttrType Property (RADIUS Component)

The type of the attribute.

Syntax

__property int AttrType[int AttrIndex] = { read=FAttrType, write=FSetAttrType };

Default Value

0

Remarks

The type of the attribute.

This property identifies the type of the attribute. Common values are:

The AttrIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttrCount property.

This property is not available at design time.

Data Type

Integer

AttrName Property (RADIUS Component)

A text description of the attribute type.

Syntax

__property String AttrName[int AttrIndex] = { read=FAttrName };

Default Value

""

Remarks

A text description of the attribute type.

This property holds a text description of the AttributeType.

The AttrIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttrCount property.

This property is read-only and not available at design time.

Data Type

String

AttrValue Property (RADIUS Component)

The attribute value.

Syntax

__property String AttrValue[int AttrIndex] = { read=FAttrValue, write=FSetAttrValue };
__property DynamicArray<Byte> AttrValueB[int AttrIndex] = { read=FAttrValueB, write=FSetAttrValueB };

Default Value

""

Remarks

The attribute value.

The AttrIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AttrCount property.

This property is not available at design time.

Data Type

Byte Array

AuthMechanism Property (RADIUS Component)

The authentication mechanism to be used when connecting to the RADIUS server.

Syntax

__property TipaRADIUSAuthMechanisms AuthMechanism = { read=FAuthMechanism, write=FSetAuthMechanism };

enum TipaRADIUSAuthMechanisms {
  ramMSCHAPv2=0,
  ramPAP=1,
  ramPEAPv0=2,
  ramEAPTLS=3
};

Default Value

ramMSCHAPv2

Remarks

This property defines the authentication mechanism used when connecting to the RADIUS server. Possible values are:

Data Type

Integer

EAPAnonymousIdentity Property (RADIUS Component)

The identity to use when using PEAP or EAP-TLS.

Syntax

__property String EAPAnonymousIdentity = { read=FEAPAnonymousIdentity, write=FSetEAPAnonymousIdentity };

Default Value

"anonymous"

Remarks

This property specifies the initial identity to use when establishing a secure connection using PEAP. When AuthMechanism is set to amPEAPv0 or emEAPTLS the connection begins in plaintext. This property specifies the user name (if any) that is sent in the initial plaintext request. This allows the true identity of the user to be hidden.

If set, the value will be sent in the plaintext connection request. If not set (empty string) the User will be sent. Authentication servers may make use of a value that includes the domain to which the user will authenticate, such as anonymous@example.com. In that case the user's identity is still hidden, however the authentication server will have knowledge of the domain for the user which it may make use of.

Once a secure connection is established the user's true identity is sent to the authentication server over the TLS encrypted connection. This property specifies only the identity sent in the initial plaintext request.

The default value is anonymous.

This setting is only applicable when AuthMechanism is set to amPEAPv0 or amEAPTLS.

Data Type

String

LocalHost Property (RADIUS Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

__property String LocalHost = { read=FLocalHost, write=FSetLocalHost };

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the component initiate connections (or accept in the case of server components) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

LocalPort Property (RADIUS Component)

This property includes the User Datagram Protocol (UDP) port in the local host where UDP binds.

Syntax

__property int LocalPort = { read=FLocalPort, write=FSetLocalPort };

Default Value

0

Remarks

The LocalPort property must be set before UDP is activated (Active is set to True). This instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting it to 0 (default) enables the Transmission Control Protocol (TCP)/IP stack to choose a port at random. The chosen port will be shown by the LocalPort property after the connection is established.

LocalPort cannot be changed once the component is Active. Any attempt to set the LocalPort property when the component is Active will generate an error.

The LocalPort property is useful when trying to connect to services that require a trusted port on the client side.

Data Type

Integer

Password Property (RADIUS Component)

The user's password.

Syntax

__property String Password = { read=FPassword, write=FSetPassword };

Default Value

""

Remarks

This property specifies the password for the User. This must be set before calling Authenticate.

Data Type

String

RemoteHost Property (RADIUS Component)

This property includes the address of the remote host. Domain names are resolved to IP addresses.

Syntax

__property String RemoteHost = { read=FRemoteHost, write=FSetRemoteHost };

Default Value

""

Remarks

The RemoteHost property specifies the IP address (IP number in dotted internet format) or domain name of the remote host.

If RemoteHost is set to 255.255.255.255, the component broadcasts data on the local subnet.

If the RemoteHost property is set to a domain name, a DNS request is initiated, and upon successful termination of the request, the RemoteHost property is set to the corresponding address. If the search is not successful, an error is returned.

If UseConnection is set to True, the RemoteHost must be set before the component is activated (Active is set to True).

Data Type

String

RemotePort Property (RADIUS Component)

The port for the RADIUS server (default is 1812).

Syntax

__property int RemotePort = { read=FRemotePort, write=FSetRemotePort };

Default Value

1812

Remarks

The RemotePort is the UDP port to which requests will be made. The default value is 1812. Port 1645 is also commonly used.

Data Type

Integer

SharedSecret Property (RADIUS Component)

The RADIUS shared secret.

Syntax

__property String SharedSecret = { read=FSharedSecret, write=FSetSharedSecret };
__property DynamicArray<Byte> SharedSecretB = { read=FSharedSecretB, write=FSetSharedSecretB };

Default Value

""

Remarks

This property holds the shared secret to use when communicating with the RADIUS server.

Data Type

Byte Array

SSLAcceptServerCertEffectiveDate Property (RADIUS Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLAcceptServerCertEffectiveDate = { read=FSSLAcceptServerCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExpirationDate Property (RADIUS Component)

The date on which the certificate expires.

Syntax

__property String SSLAcceptServerCertExpirationDate = { read=FSSLAcceptServerCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExtendedKeyUsage Property (RADIUS Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLAcceptServerCertExtendedKeyUsage = { read=FSSLAcceptServerCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprint Property (RADIUS Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprint = { read=FSSLAcceptServerCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA1 Property (RADIUS Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprintSHA1 = { read=FSSLAcceptServerCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA256 Property (RADIUS Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprintSHA256 = { read=FSSLAcceptServerCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLAcceptServerCertIssuer Property (RADIUS Component)

The issuer of the certificate.

Syntax

__property String SSLAcceptServerCertIssuer = { read=FSSLAcceptServerCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKey Property (RADIUS Component)

The private key of the certificate (if available).

Syntax

__property String SSLAcceptServerCertPrivateKey = { read=FSSLAcceptServerCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKeyAvailable Property (RADIUS Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLAcceptServerCertPrivateKeyAvailable = { read=FSSLAcceptServerCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLAcceptServerCertPrivateKeyContainer Property (RADIUS Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLAcceptServerCertPrivateKeyContainer = { read=FSSLAcceptServerCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKey Property (RADIUS Component)

The public key of the certificate.

Syntax

__property String SSLAcceptServerCertPublicKey = { read=FSSLAcceptServerCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyAlgorithm Property (RADIUS Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLAcceptServerCertPublicKeyAlgorithm = { read=FSSLAcceptServerCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyLength Property (RADIUS Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLAcceptServerCertPublicKeyLength = { read=FSSLAcceptServerCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertSerialNumber Property (RADIUS Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLAcceptServerCertSerialNumber = { read=FSSLAcceptServerCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLAcceptServerCertSignatureAlgorithm Property (RADIUS Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLAcceptServerCertSignatureAlgorithm = { read=FSSLAcceptServerCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertStore Property (RADIUS Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLAcceptServerCertStore = { read=FSSLAcceptServerCertStore, write=FSetSSLAcceptServerCertStore };
__property DynamicArray<Byte> SSLAcceptServerCertStoreB = { read=FSSLAcceptServerCertStoreB, write=FSetSSLAcceptServerCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password-protected, specify the password in SSLAcceptServerCertStorePassword.

SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SSLAcceptServerCertStorePassword Property (RADIUS Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLAcceptServerCertStorePassword = { read=FSSLAcceptServerCertStorePassword, write=FSetSSLAcceptServerCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLAcceptServerCertStoreType Property (RADIUS Component)

The type of certificate store for this certificate.

Syntax

__property TipaRADIUSSSLAcceptServerCertStoreTypes SSLAcceptServerCertStoreType = { read=FSSLAcceptServerCertStoreType, write=FSetSSLAcceptServerCertStoreType };

enum TipaRADIUSSSLAcceptServerCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLAcceptServerCertSubjectAltNames Property (RADIUS Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLAcceptServerCertSubjectAltNames = { read=FSSLAcceptServerCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintMD5 Property (RADIUS Component)

The MD5 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintMD5 = { read=FSSLAcceptServerCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA1 Property (RADIUS Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintSHA1 = { read=FSSLAcceptServerCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA256 Property (RADIUS Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintSHA256 = { read=FSSLAcceptServerCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsage Property (RADIUS Component)

The text description of UsageFlags .

Syntax

__property String SSLAcceptServerCertUsage = { read=FSSLAcceptServerCertUsage };

Default Value

""

Remarks

The text description of SSLAcceptServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsageFlags Property (RADIUS Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLAcceptServerCertUsageFlags = { read=FSSLAcceptServerCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:

Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertVersion Property (RADIUS Component)

The certificate's version number.

Syntax

__property String SSLAcceptServerCertVersion = { read=FSSLAcceptServerCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLAcceptServerCertSubject Property (RADIUS Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLAcceptServerCertSubject = { read=FSSLAcceptServerCertSubject, write=FSetSSLAcceptServerCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLAcceptServerCertEncoded Property (RADIUS Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLAcceptServerCertEncoded = { read=FSSLAcceptServerCertEncoded, write=FSetSSLAcceptServerCertEncoded };
__property DynamicArray<Byte> SSLAcceptServerCertEncodedB = { read=FSSLAcceptServerCertEncodedB, write=FSetSSLAcceptServerCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertEffectiveDate Property (RADIUS Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLCertEffectiveDate = { read=FSSLCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLCertExpirationDate Property (RADIUS Component)

The date on which the certificate expires.

Syntax

__property String SSLCertExpirationDate = { read=FSSLCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLCertExtendedKeyUsage Property (RADIUS Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLCertExtendedKeyUsage = { read=FSSLCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLCertFingerprint Property (RADIUS Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprint = { read=FSSLCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLCertFingerprintSHA1 Property (RADIUS Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprintSHA1 = { read=FSSLCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLCertFingerprintSHA256 Property (RADIUS Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprintSHA256 = { read=FSSLCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLCertIssuer Property (RADIUS Component)

The issuer of the certificate.

Syntax

__property String SSLCertIssuer = { read=FSSLCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLCertPrivateKey Property (RADIUS Component)

The private key of the certificate (if available).

Syntax

__property String SSLCertPrivateKey = { read=FSSLCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLCertPrivateKeyAvailable Property (RADIUS Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLCertPrivateKeyAvailable = { read=FSSLCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLCertPrivateKeyContainer Property (RADIUS Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLCertPrivateKeyContainer = { read=FSSLCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLCertPublicKey Property (RADIUS Component)

The public key of the certificate.

Syntax

__property String SSLCertPublicKey = { read=FSSLCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLCertPublicKeyAlgorithm Property (RADIUS Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLCertPublicKeyAlgorithm = { read=FSSLCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertPublicKeyLength Property (RADIUS Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLCertPublicKeyLength = { read=FSSLCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLCertSerialNumber Property (RADIUS Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLCertSerialNumber = { read=FSSLCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLCertSignatureAlgorithm Property (RADIUS Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLCertSignatureAlgorithm = { read=FSSLCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertStore Property (RADIUS Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore };
__property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password-protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SSLCertStorePassword Property (RADIUS Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (RADIUS Component)

The type of certificate store for this certificate.

Syntax

__property TipaRADIUSSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };

enum TipaRADIUSSSLCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubjectAltNames Property (RADIUS Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLCertSubjectAltNames = { read=FSSLCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLCertThumbprintMD5 Property (RADIUS Component)

The MD5 hash of the certificate.

Syntax

__property String SSLCertThumbprintMD5 = { read=FSSLCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA1 Property (RADIUS Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLCertThumbprintSHA1 = { read=FSSLCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA256 Property (RADIUS Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLCertThumbprintSHA256 = { read=FSSLCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertUsage Property (RADIUS Component)

The text description of UsageFlags .

Syntax

__property String SSLCertUsage = { read=FSSLCertUsage };

Default Value

""

Remarks

The text description of SSLCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLCertUsageFlags Property (RADIUS Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLCertUsageFlags = { read=FSSLCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:

Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLCertVersion Property (RADIUS Component)

The certificate's version number.

Syntax

__property String SSLCertVersion = { read=FSSLCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLCertSubject Property (RADIUS Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLCertEncoded Property (RADIUS Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded };
__property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLEnabled Property (RADIUS Component)

This property indicates whether Datagram Transport Layer Security (DTLS) is enabled.

Syntax

__property bool SSLEnabled = { read=FSSLEnabled, write=FSetSSLEnabled };

Default Value

False

Remarks

This property specifies whether DTLS is enabled in the component. When false (default), the component operates in plaintext mode over UDP. When true, DTLS is enabled.

This property is not available at design time.

Data Type

Boolean

SSLServerCertEffectiveDate Property (RADIUS Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLServerCertEffectiveDate = { read=FSSLServerCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExpirationDate Property (RADIUS Component)

The date on which the certificate expires.

Syntax

__property String SSLServerCertExpirationDate = { read=FSSLServerCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExtendedKeyUsage Property (RADIUS Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLServerCertExtendedKeyUsage = { read=FSSLServerCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLServerCertFingerprint Property (RADIUS Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprint = { read=FSSLServerCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA1 Property (RADIUS Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprintSHA1 = { read=FSSLServerCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA256 Property (RADIUS Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprintSHA256 = { read=FSSLServerCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLServerCertIssuer Property (RADIUS Component)

The issuer of the certificate.

Syntax

__property String SSLServerCertIssuer = { read=FSSLServerCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLServerCertPrivateKey Property (RADIUS Component)

The private key of the certificate (if available).

Syntax

__property String SSLServerCertPrivateKey = { read=FSSLServerCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLServerCertPrivateKeyAvailable Property (RADIUS Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLServerCertPrivateKeyAvailable = { read=FSSLServerCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLServerCertPrivateKeyContainer Property (RADIUS Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLServerCertPrivateKeyContainer = { read=FSSLServerCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLServerCertPublicKey Property (RADIUS Component)

The public key of the certificate.

Syntax

__property String SSLServerCertPublicKey = { read=FSSLServerCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyAlgorithm Property (RADIUS Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLServerCertPublicKeyAlgorithm = { read=FSSLServerCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyLength Property (RADIUS Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLServerCertPublicKeyLength = { read=FSSLServerCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLServerCertSerialNumber Property (RADIUS Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLServerCertSerialNumber = { read=FSSLServerCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLServerCertSignatureAlgorithm Property (RADIUS Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLServerCertSignatureAlgorithm = { read=FSSLServerCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertStore Property (RADIUS Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLServerCertStore = { read=FSSLServerCertStore };
__property DynamicArray<Byte> SSLServerCertStoreB = { read=FSSLServerCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password-protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

This property is read-only.

Data Type

Byte Array

SSLServerCertStorePassword Property (RADIUS Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLServerCertStorePassword = { read=FSSLServerCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

SSLServerCertStoreType Property (RADIUS Component)

The type of certificate store for this certificate.

Syntax

__property TipaRADIUSSSLServerCertStoreTypes SSLServerCertStoreType = { read=FSSLServerCertStoreType };

enum TipaRADIUSSSLServerCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

Integer

SSLServerCertSubjectAltNames Property (RADIUS Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLServerCertSubjectAltNames = { read=FSSLServerCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLServerCertThumbprintMD5 Property (RADIUS Component)

The MD5 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintMD5 = { read=FSSLServerCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA1 Property (RADIUS Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintSHA1 = { read=FSSLServerCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA256 Property (RADIUS Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintSHA256 = { read=FSSLServerCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertUsage Property (RADIUS Component)

The text description of UsageFlags .

Syntax

__property String SSLServerCertUsage = { read=FSSLServerCertUsage };

Default Value

""

Remarks

The text description of SSLServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLServerCertUsageFlags Property (RADIUS Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLServerCertUsageFlags = { read=FSSLServerCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:

Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLServerCertVersion Property (RADIUS Component)

The certificate's version number.

Syntax

__property String SSLServerCertVersion = { read=FSSLServerCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLServerCertSubject Property (RADIUS Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLServerCertSubject = { read=FSSLServerCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

SSLServerCertEncoded Property (RADIUS Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLServerCertEncoded = { read=FSSLServerCertEncoded };
__property DynamicArray<Byte> SSLServerCertEncodedB = { read=FSSLServerCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Byte Array

Timeout Property (RADIUS Component)

The timeout for the component.

Syntax

__property int Timeout = { read=FTimeout, write=FSetTimeout };

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the component will wait for the operation to complete before returning control.

The component will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the component raises an exception.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

User Property (RADIUS Component)

The name of the user to authenticate.

Syntax

__property String User = { read=FUser, write=FSetUser };

Default Value

""

Remarks

This property holds the name of the user to authenticate.

Data Type

String

Authenticate Method (RADIUS Component)

Authenticates the user.

Syntax

void __fastcall Authenticate();

Remarks

This method authenticates the user with the RADIUS server.

If authentication is successful this method returns without error. If authentication fails this method will throw an exception.

This following properties are applicable when calling this method:

• User (required)
• Password (required)
• SharedSecret (required)
• RemoteHost (required)
• RemotePort
• Timeout

Config Method (RADIUS Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoEvents Method (RADIUS Component)

This method processes events from the internal message queue.

Syntax

void __fastcall DoEvents();

Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns.

Interrupt Method (RADIUS Component)

This method interrupts the current method.

Syntax

void __fastcall Interrupt();

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

Reset Method (RADIUS Component)

Resets the component properties to their default values.

Syntax

void __fastcall Reset();

Remarks

This method resets the properties to their default values.

Attribute Event (RADIUS Component)

Fires for each attribute that is received.

Syntax

typedef struct {
  int AttributeType;
  String Name;
  String Value;
  DynamicArray<Byte> ValueB;
} TipaRADIUSAttributeEventParams;
typedef void __fastcall (__closure *TipaRADIUSAttributeEvent)(System::TObject* Sender, TipaRADIUSAttributeEventParams *e);
__property TipaRADIUSAttributeEvent OnAttribute = { read=FOnAttribute, write=FOnAttribute };

Remarks

This event fires once for each attribute that is received. This will fire when calling Authenticate.

AttributeType is the attribute type. Common values are:

Name is the text description of the attribute.

Value is the value of the attribute.

Error Event (RADIUS Component)

Fired when information is available about errors during data delivery.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TipaRADIUSErrorEventParams;
typedef void __fastcall (__closure *TipaRADIUSErrorEvent)(System::TObject* Sender, TipaRADIUSErrorEventParams *e);
__property TipaRADIUSErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Log Event (RADIUS Component)

Fires with log information during processing.

Syntax

typedef struct {
  int LogLevel;
  String Message;
  String LogType;
} TipaRADIUSLogEventParams;
typedef void __fastcall (__closure *TipaRADIUSLogEvent)(System::TObject* Sender, TipaRADIUSLogEventParams *e);
__property TipaRADIUSLogEvent OnLog = { read=FOnLog, write=FOnLog };

Remarks

This event fires during processing with log information. The level of detail that is logged is controlled via the LogLevel.

LogLevel indicates the level of message. Possible values are:

LogMessage is the log entry.

LogType indicates the type of log. Possible values are:

• "REQUEST"
• "RESPONSE"

SSLServerAuthentication Event (RADIUS Component)

Fired after the server presents its certificate to the client.

Syntax

typedef struct {
  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;
  String CertSubject;
  String CertIssuer;
  String Status;
  bool Accept;
} TipaRADIUSSSLServerAuthenticationEventParams;
typedef void __fastcall (__closure *TipaRADIUSSSLServerAuthenticationEvent)(System::TObject* Sender, TipaRADIUSSSLServerAuthenticationEventParams *e);
__property TipaRADIUSSSLServerAuthenticationEvent OnSSLServerAuthentication = { read=FOnSSLServerAuthentication, write=FOnSSLServerAuthentication };

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (RADIUS Component)

Fired when secure connection progress messages are available.

Syntax

typedef struct {
  String Message;
} TipaRADIUSSSLStatusEventParams;
typedef void __fastcall (__closure *TipaRADIUSSSLStatusEvent)(System::TObject* Sender, TipaRADIUSSSLStatusEventParams *e);
__property TipaRADIUSSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

Config Settings (RADIUS Component)

RADIUS Config Settings

UDP Config Settings

Socket Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Base Config Settings

Trappable Errors (RADIUS Component)

RADIUS Errors

UDP Errors

TCP/IP Errors