AMQPClassic Component

Properties   Methods   Events   Config Settings   Errors  

An easy-to-use AMQP 0.9.1 client implementation, with support for RabbitMQ extensions.

Syntax

TiotAMQPClassic

Remarks

The AMQPClassic component provides an easy-to-use AMQP 0.9.1 client implementation, and it also supports certain RabbitMQ extensions to the AMQP 0.9.1 specification. The component supports both plaintext and TLS-enabled connections over TCP.

Connecting

The AMQP 0.9.1 transport protocol has two layers: an overall connection between the client and server, and one or more channels running over that connection.

The component implements both layers, so the first step is to initiate the overall connection. Set the AuthScheme, User, Password, SSLEnabled, and VirtualHost properties if necessary, then call the ConnectTo method, passing it the server's hostname and port number. (If the server in question is not running RabbitMQ, disabling the RabbitMQCompatible configuration setting before connecting is also recommended.)

The next step is to create at least one channel, which can be accomplished by using the CreateChannel method. The component allows creating any number of channels, up to the limit specified by the MaxChannelCount configuration setting.

Connecting and Creating a Channel // The examples in this documentation use a RabbitMQ server, which requires SASL Plain auth. amqpc1.AuthScheme = AmqpclassicAuthSchemes.smSASLPlain; amqpc1.User = "guest"; amqpc1.Password = "guest"; amqpc1.SSLEnabled = true; amqpc1.ConnectTo("amqpclassic.test-server.com", 5671); amqpc1.CreateChannel("channel");

Once the component has connected to the server, and one or more channels have been opened, the component can begin manipulating exchanges and queues, publishing messages, and creating consumers.

Note that most AMQP 0.9.1 operations can themselves vary in their complexity. The examples below are intentionally simple for the sake of clarity and brevity, but links are provided for many other parts of the component's API where more detail can be found.

Declaring Exchanges

The DeclareExchange method is used to declare (i.e., create, or verify the existence of) exchanges on the server. While all AMQP servers provide a default, direct-type exchange that all queues are bound to automatically (using their name as the routing key), more complex use-cases will often require creating additional exchanges of varying types.

Declaring an Exchange // Declare a direct-type exchange. amqpc1.DeclareExchange("channel", "MyExchange", "direct", false, false, false, false);

Exchanges can also be deleted using the DeleteExchange method.

Declaring Queues

The DeclareQueue method is used to declare (i.e., create, or verify the existence of) queues on the server. Unlike with exchanges, the server does not provide any queues by default, so declaring a queue is always necessary (unless one has already been created by another client, or configured ahead-of-time on the server itself).

Declaring a Queue // Declare a queue. amqpc1.DeclareQueue("channel", "MyQueue", false, false, false, false, false);

Queues may also be deleted or purged using the DeleteQueue and PurgeQueue methods.

Binding Queues to Exchanges

The BindQueue method is used to bind a queue to an exchange. Exchanges use the information held by their queue bindings to determine which messages to forward to which queues.

Note that all AMQP 0.9.1 servers automatically bind all queues to their default exchange (which is always a direct exchange with no name) using each queue's name as the binding's routing key. This makes it easy to send a message to a specific queue without having to declare bindings; just call PublishMessage, pass empty string for ExchangeName, and the name of the desired queue for RoutingKey.

Binding a Queue to an Exchange // Bind a queue to an exchange. Messages will only be delivered to the queue if their routing key is "MyRoutingKey". amqpc1.BindQueue("channel", "MyQueue", "MyExchange", "MyRoutingKey", false);

Queues can also be unbound from exchanges using the UnbindQueue method.

Publishing Messages

To publish a message, populate the Message property's properties, and then call the PublishMessage method.

Publishing a Message amqpc1.Message.Body = "Hello, world!"; // Publish a message to the server's default (no-name) exchange, using the name of a specific queue as the routing key. amqpc1.PublishMessage("channel", "", "MyQueue", false, false); // Publish a message to the "MyExchange" exchange, using the routing key "MyRoutingKey". amqpc1.PublishMessage("channel", "MyExchange", "MyRoutingKey", false, false);

Note that outgoing messages may be handled differently by the server if the channel they are sent over is in transaction or (for RabbitMQ only) "publish confirmations" mode. Refer to the EnableTransactionMode and EnablePublishConfirms methods for more information.

Receiving Messages

There are two possible ways for the component to receive a message:

• Messages can be asynchronously pushed to the component from the server. At any point in time, the server may push a message to the component from a queue that the Consume method has been used to attach a consumer to.
• Messages can be synchronously pulled from the server by the component. The RetrieveMessage method is used to attempt to pull (or "retrieve") messages from a specific queue.

Regardless of how they are received, all incoming messages cause the ReceivedMessage property's properties to be populated and the MessageIn event to fire.

Receiving a Message // MessageIn event handler. amqpc1.OnMessageIn += (s, e) => { if (e.MessageCount == -1) { // The server pushed a message to us asynchronously due to a consumer we created. Console.WriteLine("The server pushed this message to us via consumer '" + e.ConsumerTag + "':"); Console.WriteLine(amqpc1.ReceivedMessage.Body); } else if (e.DeliveryTag > 0) { // We pulled a message from a queue with the RetrieveMessage() method. Console.WriteLine("Message successfully pulled:"); Console.WriteLine(amqpc1.ReceivedMessage.Body); Console.WriteLine(e.MessageCount + " messages are still available to pull."); } else { // We tried to pull a message, but there were none available to pull. Console.WriteLine("No messages available to pull."); } }; // Attach a consumer to "MyQueue". amqpc1.Consume("channel", "MyQueue", "consumerTag", false, true, false, false); // Or, try to retrieve a message from "MyQueue". amqpc1.RetrieveMessage("channel", "MyQueue", true);

Note that the MessageIn event always fires if RetrieveMessage is called successfully, even if there were no messages available to retrieve; refer to MessageIn for more information.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

ArgumentCount Property (AMQPClassic Component)

The number of records in the Argument arrays.

Syntax

__property int ArgumentCount = { read=FArgumentCount, write=FSetArgumentCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• ArgumentName
• ArgumentValue
• ArgumentValueType

The array indices start at 0 and end at ArgumentCount - 1.

This property is not available at design time.

Data Type

Integer

ArgumentName Property (AMQPClassic Component)

The table property's name.

Syntax

__property String ArgumentName[int ArgumentIndex] = { read=FArgumentName, write=FSetArgumentName };

Default Value

""

Remarks

The table field's name.

This property specifies the table field's name. The name must be an ASCII string that:

• Starts with an ASCII letter, $, or $ character.
• Only contains ASCII letters, digits, underscores, $, and $ characters.
• Is unique among all sibling table field ArgumentNames.
• Is no longer than 128 characters.

The ArgumentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ArgumentCount property.

This property is not available at design time.

Data Type

String

ArgumentValue Property (AMQPClassic Component)

The table property's value.

Syntax

__property String ArgumentValue[int ArgumentIndex] = { read=FArgumentValue, write=FSetArgumentValue };

Default Value

""

Remarks

The table field's value.

This property specifies the table field's value.

The ArgumentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ArgumentCount property.

This property is not available at design time.

Data Type

String

ArgumentValueType Property (AMQPClassic Component)

The table property's value type.

Syntax

__property TiotAMQPClassicArgumentValueTypes ArgumentValueType[int ArgumentIndex] = { read=FArgumentValueType, write=FSetArgumentValueType };

enum TiotAMQPClassicArgumentValueTypes {
  fvtBoolean=0,
  fvtByte=1,
  fvtUbyte=2,
  fvtShort=3,
  fvtUshort=4,
  fvtInt=5,
  fvtUint=6,
  fvtLong=7,
  fvtUlong=8,
  fvtFloat=9,
  fvtDouble=10,
  fvtDecimal=11,
  fvtSstring=12,
  fvtString=13,
  fvtArray=14,
  fvtTimestamp=15,
  fvtTable=16,
  fvtNull=17
};

Default Value

fvtNull

Remarks

The table field's value type.

This property specifies the table field's value type (and thus, the format of the data in the ArgumentValue property). Acceptable value types are:

Note: The fvtUlong (8) and fvtSstring (12) value types are not supported when the RabbitMQCompatible configuration setting is enabled.

For the fvtArray (14) value type, the ArgumentValue should be specified as a JSON array of type-value pairs; for example:

[
  { "type": "int", "value": 23 },
  { "type": "int", "value": -52 },
  { "type": "int", "value": 153325 }
]

For the fvtTable (16) value type, the ArgumentValue should be specified as a JSON object containing name-type-value tuples; for example:

{
  { "name": "Test1", "type": "long", "value": 12345678901234 },
  { "name": "Test2", "type": "boolean", "value": "false" },
  { "name": "Test3", "type": "string", "value": "This is a test." }
}

Notes regarding fvtArray (14) and fvtTable (16) type ArgumentValues:

• All "type" fields in the JSON content must be set to one of the value types in the table above.
• For fvtTable (16) type ArgumentValues, all "name" fields must adhere to the rules described by the ArgumentKey documentation.
• Nesting and mixing multiple levels of arrays and tables in the JSON is allowed.

The ArgumentIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ArgumentCount property.

This property is not available at design time.

Data Type

Integer

AuthScheme Property (AMQPClassic Component)

The authentication scheme to use when connecting.

Syntax

__property TiotAMQPClassicAuthSchemes AuthScheme = { read=FAuthScheme, write=FSetAuthScheme };

enum TiotAMQPClassicAuthSchemes {
  smNone=0,
  smSASLAnonymous=1,
  smSASLPlain=2,
  smSASLExternal=3
};

Default Value

smSASLPlain

Remarks

This property controls what authentication scheme the component should use when connecting to the remote host.

Valid values are:

• smNone (0)
• smSASLAnonymous (1)
• smSASLPlain (2) - Default
• smSASLExternal (3)

This property is not available at design time.

Data Type

Integer

ChannelCount Property (AMQPClassic Component)

The number of records in the Channel arrays.

Syntax

__property int ChannelCount = { read=FChannelCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• ChannelAccept
• ChannelMode
• ChannelName
• ChannelReadyToSend

The array indices start at 0 and end at ChannelCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ChannelAccept Property (AMQPClassic Component)

Whether the channel is currently accepting new messages from the server.

Syntax

__property bool ChannelAccept[int ChannelIndex] = { read=FChannelAccept };

Default Value

true

Remarks

Whether the channel is currently accepting new messages from the server.

This property reflects whether the channel is currently accepting new messages from the server. When the channel is created, this property is True by default.

The SetChannelAccept method can be used to disable and re-enable message acceptance at any time; refer to that method for more information.

The ChannelIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChannelCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ChannelMode Property (AMQPClassic Component)

What mode the channel is operating in.

Syntax

__property TiotAMQPClassicChannelModes ChannelMode[int ChannelIndex] = { read=FChannelMode };

enum TiotAMQPClassicChannelModes {
  cmtNormal=0,
  cmtTransactional=1,
  cmtPublishConfirms=2
};

Default Value

cmtNormal

Remarks

What mode the channel is operating in.

This property reflects what mode the channel is operating in. Possible values are:

• cmtNormal (0 - default): Normal mode.
• cmtTransactional (1): Transaction mode.
• cmtPublishConfirms (2): Publish confirmations mode.

All channels are in normal mode when they are created; there's nothing special about a channel in normal mode.

Channels can be put in transaction mode using the EnableTransactionMode method. While a channel is in transaction mode, all messages published and acknowledgements sent over it will be part of a transaction, and the server will wait to process them until the transaction is either committed or rolled back.

Channels can be put in publish confirmations mode using the EnablePublishConfirms method. While a channel is in publish confirmations mode, the server will acknowledge each message published by the component. The component will wait to fire the MessageOut event until it receives this acknowledgment. (Note that this mode is only available when the RabbitMQCompatible configuration setting is enabled.)

Note: Switching a channel to transaction or publish confirmations mode is a permanent action; the channel will then remain in that mode for the remainder of its lifetime.

The ChannelIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChannelCount property.

This property is read-only and not available at design time.

Data Type

Integer

ChannelName Property (AMQPClassic Component)

The name of the channel.

Syntax

__property String ChannelName[int ChannelIndex] = { read=FChannelName };

Default Value

""

Remarks

The name of the channel.

This property reflects the name of the channel.

The ChannelIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChannelCount property.

This property is read-only and not available at design time.

Data Type

String

ChannelReadyToSend Property (AMQPClassic Component)

Whether the channel is ready to send a message.

Syntax

__property bool ChannelReadyToSend[int ChannelIndex] = { read=FChannelReadyToSend };

Default Value

true

Remarks

Whether the channel is ready to send a message.

This property reflects whether the channel is currently ready to send a message or not.

The ChannelIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ChannelCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ClientPropertyCount Property (AMQPClassic Component)

The number of records in the ClientProperty arrays.

Syntax

__property int ClientPropertyCount = { read=FClientPropertyCount, write=FSetClientPropertyCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• ClientPropertyName
• ClientPropertyValue
• ClientPropertyValueType

The array indices start at 0 and end at ClientPropertyCount - 1.

This property is not available at design time.

Data Type

Integer

ClientPropertyName Property (AMQPClassic Component)

The table property's name.

Syntax

__property String ClientPropertyName[int ClientPropertyIndex] = { read=FClientPropertyName, write=FSetClientPropertyName };

Default Value

""

Remarks

The table field's name.

This property specifies the table field's name. The name must be an ASCII string that:

• Starts with an ASCII letter, $, or $ character.
• Only contains ASCII letters, digits, underscores, $, and $ characters.
• Is unique among all sibling table field ClientPropertyNames.
• Is no longer than 128 characters.

The ClientPropertyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClientPropertyCount property.

This property is not available at design time.

Data Type

String

ClientPropertyValue Property (AMQPClassic Component)

The table property's value.

Syntax

__property String ClientPropertyValue[int ClientPropertyIndex] = { read=FClientPropertyValue, write=FSetClientPropertyValue };

Default Value

""

Remarks

The table field's value.

This property specifies the table field's value.

The ClientPropertyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClientPropertyCount property.

This property is not available at design time.

Data Type

String

ClientPropertyValueType Property (AMQPClassic Component)

The table property's value type.

Syntax

__property TiotAMQPClassicClientPropertyValueTypes ClientPropertyValueType[int ClientPropertyIndex] = { read=FClientPropertyValueType, write=FSetClientPropertyValueType };

enum TiotAMQPClassicClientPropertyValueTypes {
  fvtBoolean=0,
  fvtByte=1,
  fvtUbyte=2,
  fvtShort=3,
  fvtUshort=4,
  fvtInt=5,
  fvtUint=6,
  fvtLong=7,
  fvtUlong=8,
  fvtFloat=9,
  fvtDouble=10,
  fvtDecimal=11,
  fvtSstring=12,
  fvtString=13,
  fvtArray=14,
  fvtTimestamp=15,
  fvtTable=16,
  fvtNull=17
};

Default Value

fvtNull

Remarks

The table field's value type.

This property specifies the table field's value type (and thus, the format of the data in the ClientPropertyValue property). Acceptable value types are:

Note: The fvtUlong (8) and fvtSstring (12) value types are not supported when the RabbitMQCompatible configuration setting is enabled.

For the fvtArray (14) value type, the ClientPropertyValue should be specified as a JSON array of type-value pairs; for example:

[
  { "type": "int", "value": 23 },
  { "type": "int", "value": -52 },
  { "type": "int", "value": 153325 }
]

For the fvtTable (16) value type, the ClientPropertyValue should be specified as a JSON object containing name-type-value tuples; for example:

{
  { "name": "Test1", "type": "long", "value": 12345678901234 },
  { "name": "Test2", "type": "boolean", "value": "false" },
  { "name": "Test3", "type": "string", "value": "This is a test." }
}

Notes regarding fvtArray (14) and fvtTable (16) type ClientPropertyValues:

• All "type" fields in the JSON content must be set to one of the value types in the table above.
• For fvtTable (16) type ClientPropertyValues, all "name" fields must adhere to the rules described by the ClientPropertyKey documentation.
• Nesting and mixing multiple levels of arrays and tables in the JSON is allowed.

The ClientPropertyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClientPropertyCount property.

This property is not available at design time.

Data Type

Integer

Connected Property (AMQPClassic Component)

This property indicates whether the component is connected.

Syntax

__property bool Connected = { read=FConnected };

Default Value

False

Remarks

This property indicates whether the component is connected to the remote host. Use the Connect and Disconnect methods to manage the connection.

This property is read-only and not available at design time.

Data Type

Boolean

FirewallAutoDetect Property (AMQPClassic Component)

Whether to automatically detect and use firewall system settings, if available.

Syntax

__property bool FirewallAutoDetect = { read=FFirewallAutoDetect, write=FSetFirewallAutoDetect };

Default Value

False

Remarks

Whether to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (AMQPClassic Component)

The type of firewall to connect through.

Syntax

__property TiotAMQPClassicFirewallTypes FirewallType = { read=FFirewallType, write=FSetFirewallType };

enum TiotAMQPClassicFirewallTypes {
  fwNone=0,
  fwTunnel=1,
  fwSOCKS4=2,
  fwSOCKS5=3,
  fwSOCKS4A=10
};

Default Value

fwNone

Remarks

The type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (AMQPClassic Component)

The name or IP address of the firewall (optional).

Syntax

__property String FirewallHost = { read=FFirewallHost, write=FSetFirewallHost };

Default Value

""

Remarks

The name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the component raises an exception.

Data Type

String

FirewallPassword Property (AMQPClassic Component)

A password if authentication is to be used when connecting through the firewall.

Syntax

__property String FirewallPassword = { read=FFirewallPassword, write=FSetFirewallPassword };

Default Value

""

Remarks

A password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Data Type

String

FirewallPort Property (AMQPClassic Component)

The Transmission Control Protocol (TCP) port for the firewall Host .

Syntax

__property int FirewallPort = { read=FFirewallPort, write=FSetFirewallPort };

Default Value

0

Remarks

The Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (AMQPClassic Component)

A username if authentication is to be used when connecting through a firewall.

Syntax

__property String FirewallUser = { read=FFirewallUser, write=FSetFirewallUser };

Default Value

""

Remarks

A username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the component raises an exception.

Data Type

String

Heartbeat Property (AMQPClassic Component)

The heartbeat timeout value.

Syntax

__property int Heartbeat = { read=FHeartbeat, write=FSetHeartbeat };

Default Value

0

Remarks

This property specifies the heartbeat timeout value, in seconds. Heartbeats are disabled if set to 0 (default).

Before connecting, this property can be set to indicate the desired heartbeat timeout value. During the connection process, the component and the server will compare their desired heartbeat values and choose the lower one.

Once connected, this property will reflect the agreed-upon heartbeat value. While the connection is idle, heartbeats are sent by both the component and the server approximately once every (Heartbeat / 2) seconds. If either side has not received a heartbeat (or other transmission) for ~Heartbeat seconds, it will consider the other side unreachable and close the connection.

This setting cannot be changed while connected.

This property is not available at design time.

Data Type

Integer

IncomingMessageCount Property (AMQPClassic Component)

The number of records in the IncomingMessage arrays.

Syntax

__property int IncomingMessageCount = { read=FIncomingMessageCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• IncomingMessageAppId
• IncomingMessageBody
• IncomingMessageChannelName
• IncomingMessageContentEncoding
• IncomingMessageContentType
• IncomingMessageCorrelationId
• IncomingMessageDeliveryMode
• IncomingMessageExpiration
• IncomingMessageHeaders
• IncomingMessageId
• IncomingMessagePriority
• IncomingMessageReplyTo
• IncomingMessageTimestamp
• IncomingMessageType
• IncomingMessageUserId

The array indices start at 0 and end at IncomingMessageCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

IncomingMessageAppId Property (AMQPClassic Component)

The Id of the application that created the message.

Syntax

__property String IncomingMessageAppId[int IncomingMessageIndex] = { read=FIncomingMessageAppId };

Default Value

""

Remarks

The Id of the application that created the message.

This property holds the Id of the application that created the message. It may be empty if the message does not have an application Id set.

This value must be specified as a string no longer than 255 characters.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageBody Property (AMQPClassic Component)

The message body.

Syntax

__property String IncomingMessageBody[int IncomingMessageIndex] = { read=FIncomingMessageBody };
__property DynamicArray<Byte> IncomingMessageBodyB[int IncomingMessageIndex] = { read=FIncomingMessageBodyB };

Default Value

""

Remarks

The message body.

This property holds the body of the message. It may be empty.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

IncomingMessageChannelName Property (AMQPClassic Component)

The name of the channel the message is associated with.

Syntax

__property String IncomingMessageChannelName[int IncomingMessageIndex] = { read=FIncomingMessageChannelName };

Default Value

""

Remarks

The name of the channel the message is associated with.

This property reflects the name of the channel which the message is associated with; it is populated automatically by the component.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageContentEncoding Property (AMQPClassic Component)

The content encoding of the message's body.

Syntax

__property String IncomingMessageContentEncoding[int IncomingMessageIndex] = { read=FIncomingMessageContentEncoding };

Default Value

""

Remarks

The content encoding of the message's body.

This property holds the content encoding of the message's body. It may be empty if the message does not have a content encoding set.

This value must be specified as a string no longer than 255 characters.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageContentType Property (AMQPClassic Component)

The content type (MIME type) of the message's body.

Syntax

__property String IncomingMessageContentType[int IncomingMessageIndex] = { read=FIncomingMessageContentType };

Default Value

""

Remarks

The content type (MIME type) of the message's body.

This property holds the content type (MIME type) of the message's body. It may be empty if the message does not have a content type set.

This value must be specified as a string no longer than 255 characters.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageCorrelationId Property (AMQPClassic Component)

The correlation Id of the message.

Syntax

__property String IncomingMessageCorrelationId[int IncomingMessageIndex] = { read=FIncomingMessageCorrelationId };

Default Value

""

Remarks

The correlation Id of the message.

This property holds the correlation Id of the message. It may be empty if the message does not have a correlation Id set.

This value must be specified as a string no longer than 255 characters.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageDeliveryMode Property (AMQPClassic Component)

The delivery mode of the message.

Syntax

__property int IncomingMessageDeliveryMode[int IncomingMessageIndex] = { read=FIncomingMessageDeliveryMode };

Default Value

0

Remarks

The delivery mode of the message.

This property holds the delivery mode of the message; possible values are:

• 0: Unspecified.
• 1: Non-persistent; the message may be lost if the server encounters an error.
• 2: Persistent; the message will not be lost, even in case of server errors.

The default is 0, which indicates that the message does not have an explicit delivery mode set.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Integer

IncomingMessageExpiration Property (AMQPClassic Component)

The time-to-live value for this message.

Syntax

__property String IncomingMessageExpiration[int IncomingMessageIndex] = { read=FIncomingMessageExpiration };

Default Value

""

Remarks

The time-to-live value for this message.

This property specifies the time-to-live (TTL) value, in milliseconds, for this message. It may be -1 if this message does not have a TTL.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageHeaders Property (AMQPClassic Component)

Headers associated with the message.

Syntax

__property String IncomingMessageHeaders[int IncomingMessageIndex] = { read=FIncomingMessageHeaders };

Default Value

""

Remarks

Headers associated with the message.

This property holds additional Headers associated with the message. It may be empty if the message does not have any headers set.

This property must be specified as a JSON object containing name-type-value tuples; for example:

[
  { "name": "Header1", "type": "long", "value": 12345678901234 },
  { "name": "Header2", "type": "boolean", "value": "false" },
  { "name": "Header3", "type": "string", "value": "This is a test." }
]

All "name" values must be ASCII strings that:

• Start with an ASCII letter, $, or $ character.
• Only contain ASCII letters, digits, underscores, $, and $ characters.
• Are unique among their siblings.
• Are no longer than 128 characters.

The following table describes all valid "type" values, and how to format the "value" field for each:

Note: The ulong and sstring value types are not supported when the RabbitMQCompatible configuration setting is enabled.

Headers of the table type should be specified in the same manner as shown above, while headers of the array type should be specified as a JSON array of type-value pairs; for example:

[
  { "type": "int", "value": 23 },
  { "type": "int", "value": -52 },
  { "type": "int", "value": 153325 }
]

Nesting and mixing multiple levels of arrays and tables is allowed.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageId Property (AMQPClassic Component)

The unique Id of the message.

Syntax

__property String IncomingMessageId[int IncomingMessageIndex] = { read=FIncomingMessageId };

Default Value

""

Remarks

The unique Id of the message.

This property holds the unique Id of the message. It may be empty if the message does not have a unique Id.

This value must be specified as a string no longer than 255 characters.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessagePriority Property (AMQPClassic Component)

The priority of the message.

Syntax

__property int IncomingMessagePriority[int IncomingMessageIndex] = { read=FIncomingMessagePriority };

Default Value

0

Remarks

The priority of the message.

This property holds the priority of the message. Valid priority values are 0-9; any other value causes the message to have unspecified priority when sent.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Integer

IncomingMessageReplyTo Property (AMQPClassic Component)

The address to send replies to for the message.

Syntax

__property String IncomingMessageReplyTo[int IncomingMessageIndex] = { read=FIncomingMessageReplyTo };

Default Value

""

Remarks

The address to send replies to for the message.

This property specifies the address to send replies to for the message. It may be empty if the message does not have a specific reply-to address set.

This value must be specified as a string no longer than 255 characters.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageTimestamp Property (AMQPClassic Component)

The message's timestamp.

Syntax

__property __int64 IncomingMessageTimestamp[int IncomingMessageIndex] = { read=FIncomingMessageTimestamp };

Default Value

0

Remarks

The message's timestamp.

This property holds the timestamp of the message, specified as milliseconds since the Unix epoch (January 1, 1970 00:00:00 UTC). It may be less than or equal to 0 (default) if the message does not have a timestamp set.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

Long64

IncomingMessageType Property (AMQPClassic Component)

The message's type.

Syntax

__property String IncomingMessageType[int IncomingMessageIndex] = { read=FIncomingMessageType };

Default Value

""

Remarks

The message's type.

This property holds the type of the message. It may be empty if the message does not have a type set.

This value must be specified as a string no longer than 255 characters.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

IncomingMessageUserId Property (AMQPClassic Component)

The identity of the user responsible for producing the message.

Syntax

__property String IncomingMessageUserId[int IncomingMessageIndex] = { read=FIncomingMessageUserId };

Default Value

""

Remarks

The identity of the user responsible for producing the message.

This property specifies the identity of the user responsible for producing the message. It may be empty if no specific user was responsible for creating the message.

A message's user Id may be used for verification or authentication by the server and/or the final consumer.

This value must be specified as a string no longer than 255 characters.

The IncomingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the IncomingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

LocalHost Property (AMQPClassic Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

__property String LocalHost = { read=FLocalHost, write=FSetLocalHost };

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the component initiate connections (or accept in the case of server components) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

LocalPort Property (AMQPClassic Component)

The TCP port in the local host where the component binds.

Syntax

__property int LocalPort = { read=FLocalPort, write=FSetLocalPort };

Default Value

0

Remarks

This property must be set before a connection is attempted. It instructs the component to bind to a specific port (or communication endpoint) in the local machine.

Setting this property to 0 (default) enables the system to choose an open port at random. The chosen port will be returned by the LocalPort property after the connection is established.

LocalPort cannot be changed once a connection is made. Any attempt to set this property when a connection is active will generate an error.

This property is useful when trying to connect to services that require a trusted port on the client side.

Data Type

Integer

MessageAppId Property (AMQPClassic Component)

The Id of the application that created the message.

Syntax

__property String MessageAppId = { read=FMessageAppId, write=FSetMessageAppId };

Default Value

""

Remarks

The Id of the application that created the message.

This property holds the Id of the application that created the message. It may be empty if the message does not have an application Id set.

This value must be specified as a string no longer than 255 characters.

This property is not available at design time.

Data Type

String

MessageBody Property (AMQPClassic Component)

The message body.

Syntax

__property String MessageBody = { read=FMessageBody, write=FSetMessageBody };
__property DynamicArray<Byte> MessageBodyB = { read=FMessageBodyB, write=FSetMessageBodyB };

Default Value

""

Remarks

The message body.

This property holds the body of the message. It may be empty.

This property is not available at design time.

Data Type

Byte Array

MessageChannelName Property (AMQPClassic Component)

The name of the channel the message is associated with.

Syntax

__property String MessageChannelName = { read=FMessageChannelName };

Default Value

""

Remarks

The name of the channel the message is associated with.

This property reflects the name of the channel which the message is associated with; it is populated automatically by the component.

This property is read-only and not available at design time.

Data Type

String

MessageContentEncoding Property (AMQPClassic Component)

The content encoding of the message's body.

Syntax

__property String MessageContentEncoding = { read=FMessageContentEncoding, write=FSetMessageContentEncoding };

Default Value

""

Remarks

The content encoding of the message's body.

This property holds the content encoding of the message's body. It may be empty if the message does not have a content encoding set.

This value must be specified as a string no longer than 255 characters.

This property is not available at design time.

Data Type

String

MessageContentType Property (AMQPClassic Component)

The content type (MIME type) of the message's body.

Syntax

__property String MessageContentType = { read=FMessageContentType, write=FSetMessageContentType };

Default Value

""

Remarks

The content type (MIME type) of the message's body.

This property holds the content type (MIME type) of the message's body. It may be empty if the message does not have a content type set.

This value must be specified as a string no longer than 255 characters.

This property is not available at design time.

Data Type

String

MessageCorrelationId Property (AMQPClassic Component)

The correlation Id of the message.

Syntax

__property String MessageCorrelationId = { read=FMessageCorrelationId, write=FSetMessageCorrelationId };

Default Value

""

Remarks

The correlation Id of the message.

This property holds the correlation Id of the message. It may be empty if the message does not have a correlation Id set.

This value must be specified as a string no longer than 255 characters.

This property is not available at design time.

Data Type

String

MessageDeliveryMode Property (AMQPClassic Component)

The delivery mode of the message.

Syntax

__property int MessageDeliveryMode = { read=FMessageDeliveryMode, write=FSetMessageDeliveryMode };

Default Value

0

Remarks

The delivery mode of the message.

This property holds the delivery mode of the message; possible values are:

• 0: Unspecified.
• 1: Non-persistent; the message may be lost if the server encounters an error.
• 2: Persistent; the message will not be lost, even in case of server errors.

The default is 0, which indicates that the message does not have an explicit delivery mode set.

This property is not available at design time.

Data Type

Integer

MessageExpiration Property (AMQPClassic Component)

The time-to-live value for this message.

Syntax

__property String MessageExpiration = { read=FMessageExpiration, write=FSetMessageExpiration };

Default Value

""

Remarks

The time-to-live value for this message.

This property specifies the time-to-live (TTL) value, in milliseconds, for this message. It may be -1 if this message does not have a TTL.

This property is not available at design time.

Data Type

String

MessageHeaders Property (AMQPClassic Component)

Headers associated with the message.

Syntax

__property String MessageHeaders = { read=FMessageHeaders, write=FSetMessageHeaders };

Default Value

""

Remarks

Headers associated with the message.

This property holds additional Headers associated with the message. It may be empty if the message does not have any headers set.

This property must be specified as a JSON object containing name-type-value tuples; for example:

[
  { "name": "Header1", "type": "long", "value": 12345678901234 },
  { "name": "Header2", "type": "boolean", "value": "false" },
  { "name": "Header3", "type": "string", "value": "This is a test." }
]

All "name" values must be ASCII strings that:

• Start with an ASCII letter, $, or $ character.
• Only contain ASCII letters, digits, underscores, $, and $ characters.
• Are unique among their siblings.
• Are no longer than 128 characters.

The following table describes all valid "type" values, and how to format the "value" field for each:

Note: The ulong and sstring value types are not supported when the RabbitMQCompatible configuration setting is enabled.

Headers of the table type should be specified in the same manner as shown above, while headers of the array type should be specified as a JSON array of type-value pairs; for example:

[
  { "type": "int", "value": 23 },
  { "type": "int", "value": -52 },
  { "type": "int", "value": 153325 }
]

Nesting and mixing multiple levels of arrays and tables is allowed.

This property is not available at design time.

Data Type

String

MessageId Property (AMQPClassic Component)

The unique Id of the message.

Syntax

__property String MessageId = { read=FMessageId, write=FSetMessageId };

Default Value

""

Remarks

The unique Id of the message.

This property holds the unique Id of the message. It may be empty if the message does not have a unique Id.

This value must be specified as a string no longer than 255 characters.

This property is not available at design time.

Data Type

String

MessagePriority Property (AMQPClassic Component)

The priority of the message.

Syntax

__property int MessagePriority = { read=FMessagePriority, write=FSetMessagePriority };

Default Value

0

Remarks

The priority of the message.

This property holds the priority of the message. Valid priority values are 0-9; any other value causes the message to have unspecified priority when sent.

This property is not available at design time.

Data Type

Integer

MessageReplyTo Property (AMQPClassic Component)

The address to send replies to for the message.

Syntax

__property String MessageReplyTo = { read=FMessageReplyTo, write=FSetMessageReplyTo };

Default Value

""

Remarks

The address to send replies to for the message.

This property specifies the address to send replies to for the message. It may be empty if the message does not have a specific reply-to address set.

This value must be specified as a string no longer than 255 characters.

This property is not available at design time.

Data Type

String

MessageTimestamp Property (AMQPClassic Component)

The message's timestamp.

Syntax

__property __int64 MessageTimestamp = { read=FMessageTimestamp, write=FSetMessageTimestamp };

Default Value

0

Remarks

The message's timestamp.

This property holds the timestamp of the message, specified as milliseconds since the Unix epoch (January 1, 1970 00:00:00 UTC). It may be less than or equal to 0 (default) if the message does not have a timestamp set.

This property is not available at design time.

Data Type

Long64

MessageType Property (AMQPClassic Component)

The message's type.

Syntax

__property String MessageType = { read=FMessageType, write=FSetMessageType };

Default Value

""

Remarks

The message's type.

This property holds the type of the message. It may be empty if the message does not have a type set.

This value must be specified as a string no longer than 255 characters.

This property is not available at design time.

Data Type

String

MessageUserId Property (AMQPClassic Component)

The identity of the user responsible for producing the message.

Syntax

__property String MessageUserId = { read=FMessageUserId, write=FSetMessageUserId };

Default Value

""

Remarks

The identity of the user responsible for producing the message.

This property specifies the identity of the user responsible for producing the message. It may be empty if no specific user was responsible for creating the message.

A message's user Id may be used for verification or authentication by the server and/or the final consumer.

This value must be specified as a string no longer than 255 characters.

This property is not available at design time.

Data Type

String

OutgoingMessageCount Property (AMQPClassic Component)

The number of records in the OutgoingMessage arrays.

Syntax

__property int OutgoingMessageCount = { read=FOutgoingMessageCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• OutgoingMessageAppId
• OutgoingMessageBody
• OutgoingMessageChannelName
• OutgoingMessageContentEncoding
• OutgoingMessageContentType
• OutgoingMessageCorrelationId
• OutgoingMessageDeliveryMode
• OutgoingMessageExpiration
• OutgoingMessageHeaders
• OutgoingMessageId
• OutgoingMessagePriority
• OutgoingMessageReplyTo
• OutgoingMessageTimestamp
• OutgoingMessageType
• OutgoingMessageUserId

The array indices start at 0 and end at OutgoingMessageCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

OutgoingMessageAppId Property (AMQPClassic Component)

The Id of the application that created the message.

Syntax

__property String OutgoingMessageAppId[int OutgoingMessageIndex] = { read=FOutgoingMessageAppId };

Default Value

""

Remarks

The Id of the application that created the message.

This property holds the Id of the application that created the message. It may be empty if the message does not have an application Id set.

This value must be specified as a string no longer than 255 characters.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageBody Property (AMQPClassic Component)

The message body.

Syntax

__property String OutgoingMessageBody[int OutgoingMessageIndex] = { read=FOutgoingMessageBody };
__property DynamicArray<Byte> OutgoingMessageBodyB[int OutgoingMessageIndex] = { read=FOutgoingMessageBodyB };

Default Value

""

Remarks

The message body.

This property holds the body of the message. It may be empty.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

OutgoingMessageChannelName Property (AMQPClassic Component)

The name of the channel the message is associated with.

Syntax

__property String OutgoingMessageChannelName[int OutgoingMessageIndex] = { read=FOutgoingMessageChannelName };

Default Value

""

Remarks

The name of the channel the message is associated with.

This property reflects the name of the channel which the message is associated with; it is populated automatically by the component.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageContentEncoding Property (AMQPClassic Component)

The content encoding of the message's body.

Syntax

__property String OutgoingMessageContentEncoding[int OutgoingMessageIndex] = { read=FOutgoingMessageContentEncoding };

Default Value

""

Remarks

The content encoding of the message's body.

This property holds the content encoding of the message's body. It may be empty if the message does not have a content encoding set.

This value must be specified as a string no longer than 255 characters.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageContentType Property (AMQPClassic Component)

The content type (MIME type) of the message's body.

Syntax

__property String OutgoingMessageContentType[int OutgoingMessageIndex] = { read=FOutgoingMessageContentType };

Default Value

""

Remarks

The content type (MIME type) of the message's body.

This property holds the content type (MIME type) of the message's body. It may be empty if the message does not have a content type set.

This value must be specified as a string no longer than 255 characters.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageCorrelationId Property (AMQPClassic Component)

The correlation Id of the message.

Syntax

__property String OutgoingMessageCorrelationId[int OutgoingMessageIndex] = { read=FOutgoingMessageCorrelationId };

Default Value

""

Remarks

The correlation Id of the message.

This property holds the correlation Id of the message. It may be empty if the message does not have a correlation Id set.

This value must be specified as a string no longer than 255 characters.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageDeliveryMode Property (AMQPClassic Component)

The delivery mode of the message.

Syntax

__property int OutgoingMessageDeliveryMode[int OutgoingMessageIndex] = { read=FOutgoingMessageDeliveryMode };

Default Value

0

Remarks

The delivery mode of the message.

This property holds the delivery mode of the message; possible values are:

• 0: Unspecified.
• 1: Non-persistent; the message may be lost if the server encounters an error.
• 2: Persistent; the message will not be lost, even in case of server errors.

The default is 0, which indicates that the message does not have an explicit delivery mode set.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Integer

OutgoingMessageExpiration Property (AMQPClassic Component)

The time-to-live value for this message.

Syntax

__property String OutgoingMessageExpiration[int OutgoingMessageIndex] = { read=FOutgoingMessageExpiration };

Default Value

""

Remarks

The time-to-live value for this message.

This property specifies the time-to-live (TTL) value, in milliseconds, for this message. It may be -1 if this message does not have a TTL.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageHeaders Property (AMQPClassic Component)

Headers associated with the message.

Syntax

__property String OutgoingMessageHeaders[int OutgoingMessageIndex] = { read=FOutgoingMessageHeaders };

Default Value

""

Remarks

Headers associated with the message.

This property holds additional Headers associated with the message. It may be empty if the message does not have any headers set.

This property must be specified as a JSON object containing name-type-value tuples; for example:

[
  { "name": "Header1", "type": "long", "value": 12345678901234 },
  { "name": "Header2", "type": "boolean", "value": "false" },
  { "name": "Header3", "type": "string", "value": "This is a test." }
]

All "name" values must be ASCII strings that:

• Start with an ASCII letter, $, or $ character.
• Only contain ASCII letters, digits, underscores, $, and $ characters.
• Are unique among their siblings.
• Are no longer than 128 characters.

The following table describes all valid "type" values, and how to format the "value" field for each:

Note: The ulong and sstring value types are not supported when the RabbitMQCompatible configuration setting is enabled.

Headers of the table type should be specified in the same manner as shown above, while headers of the array type should be specified as a JSON array of type-value pairs; for example:

[
  { "type": "int", "value": 23 },
  { "type": "int", "value": -52 },
  { "type": "int", "value": 153325 }
]

Nesting and mixing multiple levels of arrays and tables is allowed.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageId Property (AMQPClassic Component)

The unique Id of the message.

Syntax

__property String OutgoingMessageId[int OutgoingMessageIndex] = { read=FOutgoingMessageId };

Default Value

""

Remarks

The unique Id of the message.

This property holds the unique Id of the message. It may be empty if the message does not have a unique Id.

This value must be specified as a string no longer than 255 characters.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessagePriority Property (AMQPClassic Component)

The priority of the message.

Syntax

__property int OutgoingMessagePriority[int OutgoingMessageIndex] = { read=FOutgoingMessagePriority };

Default Value

0

Remarks

The priority of the message.

This property holds the priority of the message. Valid priority values are 0-9; any other value causes the message to have unspecified priority when sent.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Integer

OutgoingMessageReplyTo Property (AMQPClassic Component)

The address to send replies to for the message.

Syntax

__property String OutgoingMessageReplyTo[int OutgoingMessageIndex] = { read=FOutgoingMessageReplyTo };

Default Value

""

Remarks

The address to send replies to for the message.

This property specifies the address to send replies to for the message. It may be empty if the message does not have a specific reply-to address set.

This value must be specified as a string no longer than 255 characters.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageTimestamp Property (AMQPClassic Component)

The message's timestamp.

Syntax

__property __int64 OutgoingMessageTimestamp[int OutgoingMessageIndex] = { read=FOutgoingMessageTimestamp };

Default Value

0

Remarks

The message's timestamp.

This property holds the timestamp of the message, specified as milliseconds since the Unix epoch (January 1, 1970 00:00:00 UTC). It may be less than or equal to 0 (default) if the message does not have a timestamp set.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

Long64

OutgoingMessageType Property (AMQPClassic Component)

The message's type.

Syntax

__property String OutgoingMessageType[int OutgoingMessageIndex] = { read=FOutgoingMessageType };

Default Value

""

Remarks

The message's type.

This property holds the type of the message. It may be empty if the message does not have a type set.

This value must be specified as a string no longer than 255 characters.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

OutgoingMessageUserId Property (AMQPClassic Component)

The identity of the user responsible for producing the message.

Syntax

__property String OutgoingMessageUserId[int OutgoingMessageIndex] = { read=FOutgoingMessageUserId };

Default Value

""

Remarks

The identity of the user responsible for producing the message.

This property specifies the identity of the user responsible for producing the message. It may be empty if no specific user was responsible for creating the message.

A message's user Id may be used for verification or authentication by the server and/or the final consumer.

This value must be specified as a string no longer than 255 characters.

The OutgoingMessageIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OutgoingMessageCount property.

This property is read-only and not available at design time.

Data Type

String

Password Property (AMQPClassic Component)

A password to use for SASL authentication.

Syntax

__property String Password = { read=FPassword, write=FSetPassword };

Default Value

""

Remarks

This property contains a password to use for SASL authentication.

This property is not available at design time.

Data Type

String

QueueMessageCount Property (AMQPClassic Component)

The message count returned by various queue operations.

Syntax

__property int QueueMessageCount = { read=FQueueMessageCount };

Default Value

0

Remarks

This property is populated with a message count after calling certain queue-related methods.

This property is read-only and not available at design time.

Data Type

Integer

ReceivedMessageAppId Property (AMQPClassic Component)

The Id of the application that created the message.

Syntax

__property String ReceivedMessageAppId = { read=FReceivedMessageAppId };

Default Value

""

Remarks

The Id of the application that created the message.

This property holds the Id of the application that created the message. It may be empty if the message does not have an application Id set.

This value must be specified as a string no longer than 255 characters.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageBody Property (AMQPClassic Component)

The message body.

Syntax

__property String ReceivedMessageBody = { read=FReceivedMessageBody };
__property DynamicArray<Byte> ReceivedMessageBodyB = { read=FReceivedMessageBodyB };

Default Value

""

Remarks

The message body.

This property holds the body of the message. It may be empty.

This property is read-only and not available at design time.

Data Type

Byte Array

ReceivedMessageChannelName Property (AMQPClassic Component)

The name of the channel the message is associated with.

Syntax

__property String ReceivedMessageChannelName = { read=FReceivedMessageChannelName };

Default Value

""

Remarks

The name of the channel the message is associated with.

This property reflects the name of the channel which the message is associated with; it is populated automatically by the component.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageContentEncoding Property (AMQPClassic Component)

The content encoding of the message's body.

Syntax

__property String ReceivedMessageContentEncoding = { read=FReceivedMessageContentEncoding };

Default Value

""

Remarks

The content encoding of the message's body.

This property holds the content encoding of the message's body. It may be empty if the message does not have a content encoding set.

This value must be specified as a string no longer than 255 characters.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageContentType Property (AMQPClassic Component)

The content type (MIME type) of the message's body.

Syntax

__property String ReceivedMessageContentType = { read=FReceivedMessageContentType };

Default Value

""

Remarks

The content type (MIME type) of the message's body.

This property holds the content type (MIME type) of the message's body. It may be empty if the message does not have a content type set.

This value must be specified as a string no longer than 255 characters.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageCorrelationId Property (AMQPClassic Component)

The correlation Id of the message.

Syntax

__property String ReceivedMessageCorrelationId = { read=FReceivedMessageCorrelationId };

Default Value

""

Remarks

The correlation Id of the message.

This property holds the correlation Id of the message. It may be empty if the message does not have a correlation Id set.

This value must be specified as a string no longer than 255 characters.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageDeliveryMode Property (AMQPClassic Component)

The delivery mode of the message.

Syntax

__property int ReceivedMessageDeliveryMode = { read=FReceivedMessageDeliveryMode };

Default Value

0

Remarks

The delivery mode of the message.

This property holds the delivery mode of the message; possible values are:

• 0: Unspecified.
• 1: Non-persistent; the message may be lost if the server encounters an error.
• 2: Persistent; the message will not be lost, even in case of server errors.

The default is 0, which indicates that the message does not have an explicit delivery mode set.

This property is read-only and not available at design time.

Data Type

Integer

ReceivedMessageExpiration Property (AMQPClassic Component)

The time-to-live value for this message.

Syntax

__property String ReceivedMessageExpiration = { read=FReceivedMessageExpiration };

Default Value

""

Remarks

The time-to-live value for this message.

This property specifies the time-to-live (TTL) value, in milliseconds, for this message. It may be -1 if this message does not have a TTL.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageHeaders Property (AMQPClassic Component)

Headers associated with the message.

Syntax

__property String ReceivedMessageHeaders = { read=FReceivedMessageHeaders };

Default Value

""

Remarks

Headers associated with the message.

This property holds additional Headers associated with the message. It may be empty if the message does not have any headers set.

This property must be specified as a JSON object containing name-type-value tuples; for example:

[
  { "name": "Header1", "type": "long", "value": 12345678901234 },
  { "name": "Header2", "type": "boolean", "value": "false" },
  { "name": "Header3", "type": "string", "value": "This is a test." }
]

All "name" values must be ASCII strings that:

• Start with an ASCII letter, $, or $ character.
• Only contain ASCII letters, digits, underscores, $, and $ characters.
• Are unique among their siblings.
• Are no longer than 128 characters.

The following table describes all valid "type" values, and how to format the "value" field for each:

Note: The ulong and sstring value types are not supported when the RabbitMQCompatible configuration setting is enabled.

Headers of the table type should be specified in the same manner as shown above, while headers of the array type should be specified as a JSON array of type-value pairs; for example:

[
  { "type": "int", "value": 23 },
  { "type": "int", "value": -52 },
  { "type": "int", "value": 153325 }
]

Nesting and mixing multiple levels of arrays and tables is allowed.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageId Property (AMQPClassic Component)

The unique Id of the message.

Syntax

__property String ReceivedMessageId = { read=FReceivedMessageId };

Default Value

""

Remarks

The unique Id of the message.

This property holds the unique Id of the message. It may be empty if the message does not have a unique Id.

This value must be specified as a string no longer than 255 characters.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessagePriority Property (AMQPClassic Component)

The priority of the message.

Syntax

__property int ReceivedMessagePriority = { read=FReceivedMessagePriority };

Default Value

0

Remarks

The priority of the message.

This property holds the priority of the message. Valid priority values are 0-9; any other value causes the message to have unspecified priority when sent.

This property is read-only and not available at design time.

Data Type

Integer

ReceivedMessageReplyTo Property (AMQPClassic Component)

The address to send replies to for the message.

Syntax

__property String ReceivedMessageReplyTo = { read=FReceivedMessageReplyTo };

Default Value

""

Remarks

The address to send replies to for the message.

This property specifies the address to send replies to for the message. It may be empty if the message does not have a specific reply-to address set.

This value must be specified as a string no longer than 255 characters.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageTimestamp Property (AMQPClassic Component)

The message's timestamp.

Syntax

__property __int64 ReceivedMessageTimestamp = { read=FReceivedMessageTimestamp };

Default Value

0

Remarks

The message's timestamp.

This property holds the timestamp of the message, specified as milliseconds since the Unix epoch (January 1, 1970 00:00:00 UTC). It may be less than or equal to 0 (default) if the message does not have a timestamp set.

This property is read-only and not available at design time.

Data Type

Long64

ReceivedMessageType Property (AMQPClassic Component)

The message's type.

Syntax

__property String ReceivedMessageType = { read=FReceivedMessageType };

Default Value

""

Remarks

The message's type.

This property holds the type of the message. It may be empty if the message does not have a type set.

This value must be specified as a string no longer than 255 characters.

This property is read-only and not available at design time.

Data Type

String

ReceivedMessageUserId Property (AMQPClassic Component)

The identity of the user responsible for producing the message.

Syntax

__property String ReceivedMessageUserId = { read=FReceivedMessageUserId };

Default Value

""

Remarks

The identity of the user responsible for producing the message.

This property specifies the identity of the user responsible for producing the message. It may be empty if no specific user was responsible for creating the message.

A message's user Id may be used for verification or authentication by the server and/or the final consumer.

This value must be specified as a string no longer than 255 characters.

This property is read-only and not available at design time.

Data Type

String

RemoteHost Property (AMQPClassic Component)

This property includes the address of the remote host. Domain names are resolved to IP addresses.

Syntax

__property String RemoteHost = { read=FRemoteHost, write=FSetRemoteHost };

Default Value

""

Remarks

This property specifies the IP address (IP number in dotted internet format) or the domain name of the remote host. It is set before a connection is attempted and cannot be changed once a connection is established.

If this property is set to a domain name, a DNS request is initiated, and upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, an error is returned.

If the component is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.

Example. Connecting:

TCPClientControl.RemoteHost = "MyHostNameOrIP" TCPClientControl.RemotePort = 777 TCPClientControl.Connected = true

Data Type

String

RemotePort Property (AMQPClassic Component)

The port of the AQMP server (default is 5672). The default port for SSL is 5671.

Syntax

__property int RemotePort = { read=FRemotePort, write=FSetRemotePort };

Default Value

5672

Remarks

This property specifies a service port on the remote host to connect to.

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

This property is not available at design time.

Data Type

Integer

ServerPropertyCount Property (AMQPClassic Component)

The number of records in the ServerProperty arrays.

Syntax

__property int ServerPropertyCount = { read=FServerPropertyCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• ServerPropertyName
• ServerPropertyValue
• ServerPropertyValueType

The array indices start at 0 and end at ServerPropertyCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ServerPropertyName Property (AMQPClassic Component)

The table property's name.

Syntax

__property String ServerPropertyName[int ServerPropertyIndex] = { read=FServerPropertyName };

Default Value

""

Remarks

The table field's name.

This property specifies the table field's name. The name must be an ASCII string that:

• Starts with an ASCII letter, $, or $ character.
• Only contains ASCII letters, digits, underscores, $, and $ characters.
• Is unique among all sibling table field ServerPropertyNames.
• Is no longer than 128 characters.

The ServerPropertyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerPropertyCount property.

This property is read-only and not available at design time.

Data Type

String

ServerPropertyValue Property (AMQPClassic Component)

The table property's value.

Syntax

__property String ServerPropertyValue[int ServerPropertyIndex] = { read=FServerPropertyValue };

Default Value

""

Remarks

The table field's value.

This property specifies the table field's value.

The ServerPropertyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerPropertyCount property.

This property is read-only and not available at design time.

Data Type

String

ServerPropertyValueType Property (AMQPClassic Component)

The table property's value type.

Syntax

__property TiotAMQPClassicServerPropertyValueTypes ServerPropertyValueType[int ServerPropertyIndex] = { read=FServerPropertyValueType };

enum TiotAMQPClassicServerPropertyValueTypes {
  fvtBoolean=0,
  fvtByte=1,
  fvtUbyte=2,
  fvtShort=3,
  fvtUshort=4,
  fvtInt=5,
  fvtUint=6,
  fvtLong=7,
  fvtUlong=8,
  fvtFloat=9,
  fvtDouble=10,
  fvtDecimal=11,
  fvtSstring=12,
  fvtString=13,
  fvtArray=14,
  fvtTimestamp=15,
  fvtTable=16,
  fvtNull=17
};

Default Value

fvtNull

Remarks

The table field's value type.

This property specifies the table field's value type (and thus, the format of the data in the ServerPropertyValue property). Acceptable value types are:

Note: The fvtUlong (8) and fvtSstring (12) value types are not supported when the RabbitMQCompatible configuration setting is enabled.

For the fvtArray (14) value type, the ServerPropertyValue should be specified as a JSON array of type-value pairs; for example:

[
  { "type": "int", "value": 23 },
  { "type": "int", "value": -52 },
  { "type": "int", "value": 153325 }
]

For the fvtTable (16) value type, the ServerPropertyValue should be specified as a JSON object containing name-type-value tuples; for example:

{
  { "name": "Test1", "type": "long", "value": 12345678901234 },
  { "name": "Test2", "type": "boolean", "value": "false" },
  { "name": "Test3", "type": "string", "value": "This is a test." }
}

Notes regarding fvtArray (14) and fvtTable (16) type ServerPropertyValues:

• All "type" fields in the JSON content must be set to one of the value types in the table above.
• For fvtTable (16) type ServerPropertyValues, all "name" fields must adhere to the rules described by the ServerPropertyKey documentation.
• Nesting and mixing multiple levels of arrays and tables in the JSON is allowed.

The ServerPropertyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerPropertyCount property.

This property is read-only and not available at design time.

Data Type

Integer

SSLAcceptServerCertEffectiveDate Property (AMQPClassic Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLAcceptServerCertEffectiveDate = { read=FSSLAcceptServerCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExpirationDate Property (AMQPClassic Component)

The date on which the certificate expires.

Syntax

__property String SSLAcceptServerCertExpirationDate = { read=FSSLAcceptServerCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExtendedKeyUsage Property (AMQPClassic Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLAcceptServerCertExtendedKeyUsage = { read=FSSLAcceptServerCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprint Property (AMQPClassic Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprint = { read=FSSLAcceptServerCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA1 Property (AMQPClassic Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprintSHA1 = { read=FSSLAcceptServerCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA256 Property (AMQPClassic Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprintSHA256 = { read=FSSLAcceptServerCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLAcceptServerCertIssuer Property (AMQPClassic Component)

The issuer of the certificate.

Syntax

__property String SSLAcceptServerCertIssuer = { read=FSSLAcceptServerCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKey Property (AMQPClassic Component)

The private key of the certificate (if available).

Syntax

__property String SSLAcceptServerCertPrivateKey = { read=FSSLAcceptServerCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKeyAvailable Property (AMQPClassic Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLAcceptServerCertPrivateKeyAvailable = { read=FSSLAcceptServerCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLAcceptServerCertPrivateKeyContainer Property (AMQPClassic Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLAcceptServerCertPrivateKeyContainer = { read=FSSLAcceptServerCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKey Property (AMQPClassic Component)

The public key of the certificate.

Syntax

__property String SSLAcceptServerCertPublicKey = { read=FSSLAcceptServerCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyAlgorithm Property (AMQPClassic Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLAcceptServerCertPublicKeyAlgorithm = { read=FSSLAcceptServerCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyLength Property (AMQPClassic Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLAcceptServerCertPublicKeyLength = { read=FSSLAcceptServerCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertSerialNumber Property (AMQPClassic Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLAcceptServerCertSerialNumber = { read=FSSLAcceptServerCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLAcceptServerCertSignatureAlgorithm Property (AMQPClassic Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLAcceptServerCertSignatureAlgorithm = { read=FSSLAcceptServerCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertStore Property (AMQPClassic Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLAcceptServerCertStore = { read=FSSLAcceptServerCertStore, write=FSetSSLAcceptServerCertStore };
__property DynamicArray<Byte> SSLAcceptServerCertStoreB = { read=FSSLAcceptServerCertStoreB, write=FSetSSLAcceptServerCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password-protected, specify the password in SSLAcceptServerCertStorePassword.

SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SSLAcceptServerCertStorePassword Property (AMQPClassic Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLAcceptServerCertStorePassword = { read=FSSLAcceptServerCertStorePassword, write=FSetSSLAcceptServerCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLAcceptServerCertStoreType Property (AMQPClassic Component)

The type of certificate store for this certificate.

Syntax

__property TiotAMQPClassicSSLAcceptServerCertStoreTypes SSLAcceptServerCertStoreType = { read=FSSLAcceptServerCertStoreType, write=FSetSSLAcceptServerCertStoreType };

enum TiotAMQPClassicSSLAcceptServerCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLAcceptServerCertSubjectAltNames Property (AMQPClassic Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLAcceptServerCertSubjectAltNames = { read=FSSLAcceptServerCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintMD5 Property (AMQPClassic Component)

The MD5 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintMD5 = { read=FSSLAcceptServerCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA1 Property (AMQPClassic Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintSHA1 = { read=FSSLAcceptServerCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA256 Property (AMQPClassic Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintSHA256 = { read=FSSLAcceptServerCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsage Property (AMQPClassic Component)

The text description of UsageFlags .

Syntax

__property String SSLAcceptServerCertUsage = { read=FSSLAcceptServerCertUsage };

Default Value

""

Remarks

The text description of SSLAcceptServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsageFlags Property (AMQPClassic Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLAcceptServerCertUsageFlags = { read=FSSLAcceptServerCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:

Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertVersion Property (AMQPClassic Component)

The certificate's version number.

Syntax

__property String SSLAcceptServerCertVersion = { read=FSSLAcceptServerCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLAcceptServerCertSubject Property (AMQPClassic Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLAcceptServerCertSubject = { read=FSSLAcceptServerCertSubject, write=FSetSSLAcceptServerCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLAcceptServerCertEncoded Property (AMQPClassic Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLAcceptServerCertEncoded = { read=FSSLAcceptServerCertEncoded, write=FSetSSLAcceptServerCertEncoded };
__property DynamicArray<Byte> SSLAcceptServerCertEncodedB = { read=FSSLAcceptServerCertEncodedB, write=FSetSSLAcceptServerCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertEffectiveDate Property (AMQPClassic Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLCertEffectiveDate = { read=FSSLCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLCertExpirationDate Property (AMQPClassic Component)

The date on which the certificate expires.

Syntax

__property String SSLCertExpirationDate = { read=FSSLCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLCertExtendedKeyUsage Property (AMQPClassic Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLCertExtendedKeyUsage = { read=FSSLCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLCertFingerprint Property (AMQPClassic Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprint = { read=FSSLCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLCertFingerprintSHA1 Property (AMQPClassic Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprintSHA1 = { read=FSSLCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLCertFingerprintSHA256 Property (AMQPClassic Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprintSHA256 = { read=FSSLCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLCertIssuer Property (AMQPClassic Component)

The issuer of the certificate.

Syntax

__property String SSLCertIssuer = { read=FSSLCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLCertPrivateKey Property (AMQPClassic Component)

The private key of the certificate (if available).

Syntax

__property String SSLCertPrivateKey = { read=FSSLCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLCertPrivateKeyAvailable Property (AMQPClassic Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLCertPrivateKeyAvailable = { read=FSSLCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLCertPrivateKeyContainer Property (AMQPClassic Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLCertPrivateKeyContainer = { read=FSSLCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLCertPublicKey Property (AMQPClassic Component)

The public key of the certificate.

Syntax

__property String SSLCertPublicKey = { read=FSSLCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLCertPublicKeyAlgorithm Property (AMQPClassic Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLCertPublicKeyAlgorithm = { read=FSSLCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertPublicKeyLength Property (AMQPClassic Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLCertPublicKeyLength = { read=FSSLCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLCertSerialNumber Property (AMQPClassic Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLCertSerialNumber = { read=FSSLCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLCertSignatureAlgorithm Property (AMQPClassic Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLCertSignatureAlgorithm = { read=FSSLCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertStore Property (AMQPClassic Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore };
__property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password-protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SSLCertStorePassword Property (AMQPClassic Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (AMQPClassic Component)

The type of certificate store for this certificate.

Syntax

__property TiotAMQPClassicSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };

enum TiotAMQPClassicSSLCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubjectAltNames Property (AMQPClassic Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLCertSubjectAltNames = { read=FSSLCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLCertThumbprintMD5 Property (AMQPClassic Component)

The MD5 hash of the certificate.

Syntax

__property String SSLCertThumbprintMD5 = { read=FSSLCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA1 Property (AMQPClassic Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLCertThumbprintSHA1 = { read=FSSLCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA256 Property (AMQPClassic Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLCertThumbprintSHA256 = { read=FSSLCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertUsage Property (AMQPClassic Component)

The text description of UsageFlags .

Syntax

__property String SSLCertUsage = { read=FSSLCertUsage };

Default Value

""

Remarks

The text description of SSLCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLCertUsageFlags Property (AMQPClassic Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLCertUsageFlags = { read=FSSLCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:

Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLCertVersion Property (AMQPClassic Component)

The certificate's version number.

Syntax

__property String SSLCertVersion = { read=FSSLCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLCertSubject Property (AMQPClassic Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLCertEncoded Property (AMQPClassic Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded };
__property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLEnabled Property (AMQPClassic Component)

This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.

Syntax

__property bool SSLEnabled = { read=FSSLEnabled, write=FSetSSLEnabled };

Default Value

False

Remarks

This property specifies whether TLS/SSL is enabled in the component. When False (default), the component operates in plaintext mode. When True, TLS/SSL is enabled.

TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.

If the default port (5672) is selected when SSLEnabled is set to true, the port will automatically be changed to the default port for AMQP with SSL (5671). Likewise, if port 5671 is selected when SSLEnabled is set to false, the port will automatically be changed to the default port. If the port has been set to any value other than the default values, it will remain the same when the value of SSLEnabled changes.

This property is not available at design time.

Data Type

Boolean

SSLProvider Property (AMQPClassic Component)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

__property TiotAMQPClassicSSLProviders SSLProvider = { read=FSSLProvider, write=FSetSSLProvider };

enum TiotAMQPClassicSSLProviders {
  sslpAutomatic=0,
  sslpPlatform=1,
  sslpInternal=2
};

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

Data Type

Integer

SSLServerCertEffectiveDate Property (AMQPClassic Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLServerCertEffectiveDate = { read=FSSLServerCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExpirationDate Property (AMQPClassic Component)

The date on which the certificate expires.

Syntax

__property String SSLServerCertExpirationDate = { read=FSSLServerCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExtendedKeyUsage Property (AMQPClassic Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLServerCertExtendedKeyUsage = { read=FSSLServerCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLServerCertFingerprint Property (AMQPClassic Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprint = { read=FSSLServerCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA1 Property (AMQPClassic Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprintSHA1 = { read=FSSLServerCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA256 Property (AMQPClassic Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprintSHA256 = { read=FSSLServerCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLServerCertIssuer Property (AMQPClassic Component)

The issuer of the certificate.

Syntax

__property String SSLServerCertIssuer = { read=FSSLServerCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLServerCertPrivateKey Property (AMQPClassic Component)

The private key of the certificate (if available).

Syntax

__property String SSLServerCertPrivateKey = { read=FSSLServerCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLServerCertPrivateKeyAvailable Property (AMQPClassic Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLServerCertPrivateKeyAvailable = { read=FSSLServerCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLServerCertPrivateKeyContainer Property (AMQPClassic Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLServerCertPrivateKeyContainer = { read=FSSLServerCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLServerCertPublicKey Property (AMQPClassic Component)

The public key of the certificate.

Syntax

__property String SSLServerCertPublicKey = { read=FSSLServerCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyAlgorithm Property (AMQPClassic Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLServerCertPublicKeyAlgorithm = { read=FSSLServerCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyLength Property (AMQPClassic Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLServerCertPublicKeyLength = { read=FSSLServerCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLServerCertSerialNumber Property (AMQPClassic Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLServerCertSerialNumber = { read=FSSLServerCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLServerCertSignatureAlgorithm Property (AMQPClassic Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLServerCertSignatureAlgorithm = { read=FSSLServerCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertStore Property (AMQPClassic Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLServerCertStore = { read=FSSLServerCertStore };
__property DynamicArray<Byte> SSLServerCertStoreB = { read=FSSLServerCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password-protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

This property is read-only.

Data Type

Byte Array

SSLServerCertStorePassword Property (AMQPClassic Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLServerCertStorePassword = { read=FSSLServerCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

SSLServerCertStoreType Property (AMQPClassic Component)

The type of certificate store for this certificate.

Syntax

__property TiotAMQPClassicSSLServerCertStoreTypes SSLServerCertStoreType = { read=FSSLServerCertStoreType };

enum TiotAMQPClassicSSLServerCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

Integer

SSLServerCertSubjectAltNames Property (AMQPClassic Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLServerCertSubjectAltNames = { read=FSSLServerCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLServerCertThumbprintMD5 Property (AMQPClassic Component)

The MD5 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintMD5 = { read=FSSLServerCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA1 Property (AMQPClassic Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintSHA1 = { read=FSSLServerCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA256 Property (AMQPClassic Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintSHA256 = { read=FSSLServerCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertUsage Property (AMQPClassic Component)

The text description of UsageFlags .

Syntax

__property String SSLServerCertUsage = { read=FSSLServerCertUsage };

Default Value

""

Remarks

The text description of SSLServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLServerCertUsageFlags Property (AMQPClassic Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLServerCertUsageFlags = { read=FSSLServerCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:

Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLServerCertVersion Property (AMQPClassic Component)

The certificate's version number.

Syntax

__property String SSLServerCertVersion = { read=FSSLServerCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLServerCertSubject Property (AMQPClassic Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLServerCertSubject = { read=FSSLServerCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

SSLServerCertEncoded Property (AMQPClassic Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLServerCertEncoded = { read=FSSLServerCertEncoded };
__property DynamicArray<Byte> SSLServerCertEncodedB = { read=FSSLServerCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Byte Array

Timeout Property (AMQPClassic Component)

This property includes the timeout for the component.

Syntax

__property int Timeout = { read=FTimeout, write=FSetTimeout };

Default Value

60

Remarks

If the Timeout property is set to 0, all operations return immediately, potentially failing with a WOULDBLOCK error if data cannot be sent immediately.

If Timeout is set to a positive value, data is sent in a blocking manner and the component will wait for the operation to complete before returning control. The component will handle any potential WOULDBLOCK errors internally and automatically retry the operation for a maximum of Timeout seconds.

The component will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the component raises an exception.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

User Property (AMQPClassic Component)

A username to use for SASL authentication.

Syntax

__property String User = { read=FUser, write=FSetUser };

Default Value

""

Remarks

This property contains a username to use for SASL authentication.

This property is not available at design time.

Data Type

String

VirtualHost Property (AMQPClassic Component)

The virtual host to connect to.

Syntax

__property String VirtualHost = { read=FVirtualHost, write=FSetVirtualHost };

Default Value

"/"

Remarks

This property specifies the virtual host to connect to on the server, and is set to / by default.

Note that the configuration of the server defines what virtual hosts are available.

This setting cannot be changed while connected.

This property is not available at design time.

Data Type

String

BindQueue Method (AMQPClassic Component)

Binds a queue to an exchange.

Syntax

void __fastcall BindQueue(String ChannelName, String QueueName, String ExchangeName, String RoutingKey, bool NoWait);

Remarks

This method is used to bind the queue named QueueName to the exchange named ExchangeName. Exchanges use bindings to determine which queues to route messages to.

Multiple bindings between the same queue and exchange with different RoutingKeys and/or arguments are allowed; requests that would create a duplicate binding are ignored. No queue will ever receive duplicate copies of any message, regardless of what bindings are present on the server.

Note that all AMQP 0.9.1 servers automatically bind all queues to their default exchange (which is always a direct exchange with no name) using each queue's name as the binding's routing key. This makes it easy to send a message to a specific queue without having to declare bindings; just call PublishMessage, pass empty string for ExchangeName, and the name of the desired queue for RoutingKey.

ChannelName controls what channel the component will send the request over. While any channel can technically be used, keep in mind that the server will close it if a channel error occurs. For this reason, it is good practice to make requests such as this one using a channel that is not involved in message publishing or consumption.

QueueName must be a non-empty string consisting only of letters, digits, hyphens, underscores, periods, and colons. It must be no longer than 255 characters.

The server's default exchange may be specified by passing empty string for ExchangeName. Otherwise, ExchangeName must be a non-empty string consisting only of letters, digits, hyphens, underscores, periods, and colons. It must be no longer than 255 characters.

The RoutingKey parameter specifies the binding's routing key. Exchanges that use routing-key-based logic make some sort of comparison between the routing keys of incoming messages and this value to decide which messages should be forwarded to the specified queue. Examples of exchange types which use routing keys include:

• direct exchanges, which compare (for equality) the routing keys of incoming messages to the routing keys of each queue bound to them.
• topic exchanges, which match the routing keys of incoming messages against the routing pattern of each queue bound to them.

Not all exchange types make use of routing keys, in which case empty string can be passed for the RoutingKey parameter. Examples of exchange types which don't use routing keys include:

• fanout exchanges simply forward incoming messages to all queues bound to them, unconditionally.
• header exchanges only forward messages that include certain headers. When binding a queue to a header exchange, add items to the Arguments collection to describe the headers that eligible messages must have, and whether they must have any or all of those headers.

Note that the format of the RoutingKey parameter and/or the content of the Arguments collection may differ slightly between server implementations. Refer to your server's documentation to determine what it expects to receive for each exchange type that it supports.

The NoWait parameter, if True, will cause the server to execute the request asynchronously. For asynchronous request handling, the server only sends back a response in case of an error.

An exception is thrown if no channel with the given ChannelName exists, or if the server returns an error because:

• No queue with the given QueueName exists.
• No exchange with the given ExchangeName exists.

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

Binding a Queue to an Exchange // Bind a queue to an exchange. Messages will only be delivered to the queue if their routing key is "MyRoutingKey". amqpc1.BindQueue("channel", "MyQueue", "MyExchange", "MyRoutingKey", false);

CancelConsume Method (AMQPClassic Component)

Cancels an existing consumer.

Syntax

void __fastcall CancelConsume(String ChannelName, String ConsumerTag, bool NoWait);

Remarks

This method requests that the server cancel the consumer identified by the given ConsumerTag on the channel specified by ChannelName.

The NoWait parameter, if True, will cause the server to execute the request asynchronously. For asynchronous request handling, the server only sends back a response in case of an error.

An exception is thrown if no channel with the given ChannelName exists, or if the server returns an error because no consumer with the given ConsumerTag exists.

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

CloseChannel Method (AMQPClassic Component)

Closes a channel.

Syntax

void __fastcall CloseChannel(String ChannelName);

Remarks

This method closes the channel named ChannelName and removes it from the Channels properties.

If no channel with the given ChannelName exists, an exception will be thrown.

CommitTransaction Method (AMQPClassic Component)

Commits the current transaction for a channel.

Syntax

void __fastcall CommitTransaction(String ChannelName);

Remarks

This method commits the current transaction for the channel with the given ChannelName. A new transaction is started immediately after the current one is committed.

Refer to EnableTransactionMode for more information about transactions.

An exception is thrown if a channel with the given ChannelName doesn't exist, or if the server returns an error because the channel does not have transaction mode enabled.

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

Config Method (AMQPClassic Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (AMQPClassic Component)

This method connects to a remote host.

Syntax

void __fastcall Connect();

Remarks

This method connects to the remote host specified by RemoteHost and RemotePort. For instance: component.RemoteHost = "MyHostNameOrIP"; component.RemotePort = 7777; component.Connect();

ConnectTo Method (AMQPClassic Component)

This method connects to a remote host.

Syntax

void __fastcall ConnectTo(String Host, int Port);

Remarks

This method connects to the remote host specified by the Host and Port parameters. For instance: component.ConnectTo("MyHostNameOrIP", 777)

Consume Method (AMQPClassic Component)

Starts a new consumer for a given queue.

Syntax

void __fastcall Consume(String ChannelName, String QueueName, String ConsumerTag, bool NoLocal, bool NoAck, bool Exclusive, bool NoWait);

Remarks

This method instructs the server to start a new consumer on the queue named QueueName; once the consumer is created, it will cause messages enqueued to the specified queue to be delivered to the component over the channel specified by ChannelName.

Consumers last as long as the channel they were created on, or until they are cancelled using the CancelConsume method. Each time a message is delivered to the component, it is immediately added to the IncomingMessages collection, the ReceivedMessage property is populated, and the MessageIn event fires.

ConsumerTag is a string which uniquely identifies the new consumer on the specified channel. If empty string is passed for ConsumerTag, the server will generate a consumer tag automatically when it creates the . this auto-generated consumer tag can then be retrieved by querying the ConsumerTag configuration setting after this method returns.

The NoLocal parameter, if True, ensures that the consumer never consumes messages published on the same channel. (Note that this functionality is not available on RabbitMQ servers, which ignore the NoLocal parameter).

The NoAck parameter controls whether the server will expect the component to acknowledge the each message delivered. Refer to MessageIn for more information about acknowledging messages.

The Exclusive parameter, if True, will cause the component to request that the server create an exclusive consumer. Attaching an exclusive consumer to a queue prevents any other consumers from consuming messages from that queue.

The NoWait parameter, if True, will cause the server to execute the request asynchronously. For asynchronous request handling, the server only sends back a response in case of an error.

Additional arguments may be sent with this request by adding them to the Arguments collection. Arguments are server-dependent; refer to your server's documentation to determine if any additional arguments apply for this request.

An exception is thrown if no channel with the given ChannelName exists, or if the server returns an error because:

• No queue with the given QueueName exists.
• The given ConsumerTag is already in use on the specified channel.
• An exclusive consumer was requested for a queue which already has consumers attached to it.

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

Receiving a Message // MessageIn event handler. amqpc1.OnMessageIn += (s, e) => { if (e.MessageCount == -1) { // The server pushed a message to us asynchronously due to a consumer we created. Console.WriteLine("The server pushed this message to us via consumer '" + e.ConsumerTag + "':"); Console.WriteLine(amqpc1.ReceivedMessage.Body); } else if (e.DeliveryTag > 0) { // We pulled a message from a queue with the RetrieveMessage() method. Console.WriteLine("Message successfully pulled:"); Console.WriteLine(amqpc1.ReceivedMessage.Body); Console.WriteLine(e.MessageCount + " messages are still available to pull."); } else { // We tried to pull a message, but there were none available to pull. Console.WriteLine("No messages available to pull."); } }; // Attach a consumer to "MyQueue". amqpc1.Consume("channel", "MyQueue", "consumerTag", false, true, false, false); // Or, try to retrieve a message from "MyQueue". amqpc1.RetrieveMessage("channel", "MyQueue", true);

CreateChannel Method (AMQPClassic Component)

Creates a new channel.

Syntax

void __fastcall CreateChannel(String ChannelName);

Remarks

This method creates a new channel with the name ChannelName and adds it to the Channels properties. If a channel with the given ChannelName already exists, an error will be thrown.

Connecting and Creating a Channel // The examples in this documentation use a RabbitMQ server, which requires SASL Plain auth. amqpc1.AuthScheme = AmqpclassicAuthSchemes.smSASLPlain; amqpc1.User = "guest"; amqpc1.Password = "guest"; amqpc1.SSLEnabled = true; amqpc1.ConnectTo("amqpclassic.test-server.com", 5671); amqpc1.CreateChannel("channel");

DeclareExchange Method (AMQPClassic Component)

Verifies that an exchange exists, potentially creating it if necessary.

Syntax

void __fastcall DeclareExchange(String ChannelName, String ExchangeName, String ExchangeType, bool Passive, bool Durable, bool AutoDelete, bool NoWait);

Remarks

This method is used to verify that an exchange named ExchangeName exists; and potentially creates it if no such exchange exists.

ChannelName controls what channel the component will send the request over. While any channel can technically be used, keep in mind that the server will close it if a channel error occurs. For this reason, it is good practice to make requests such as this one using a channel that is not involved in message publishing or consumption.

ExchangeName must be a non-empty string consisting only of letters, digits, hyphens, underscores, periods, and colons. It must be no longer than 255 characters, and must not begin with amq. unless the Passive parameter is True.

ExchangeType specifies the exchange type. All servers support the direct and fanout exchange types, and most should also support the topic and header exchange types. Some servers may support additional, custom exchange types as well. Refer to your server's documentation for more information about each exchange type, and to determine what exchange types it supports other than direct and fanout.

If Passive is True, the server will only verify that an exchange with the given ExchangeName actually exists (regardless of how it is configured).

If Passive is False, and no exchange named ExchangeName currently exists, the server will create one.

If Passive is False, and there is a preexisting exchange named ExchangeName, the server will verify that its current configuration matches the given parameters and arguments.

Durable specifies what happens to the exchange in the event of a server restart. Durable exchanges will be recreated, while non-durable (transient) exchanges will not.

AutoDelete specifies whether the server should automatically delete the exchange when all queues have been unbound from it. Note that this parameter is only sent if the RabbitMQCompatible configuration setting is enabled; it is ignored otherwise.

The NoWait parameter, if True, will cause the server to execute the request asynchronously. For asynchronous request handling, the server only sends back a response in case of an error.

Additional arguments may be sent with this request by adding them to the Arguments collection. Arguments are server-dependent; refer to your server's documentation to determine if any additional arguments apply for this request.

An exception is thrown if no channel with the given ChannelName exists, or if the server returns an error because:

• One of the parameter constraints described above was violated.
• One of the verification cases described above fails.
• The value passed for ExchangeType did not correspond to an exchange type supported by the server.

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

Declaring an Exchange // Declare a direct-type exchange. amqpc1.DeclareExchange("channel", "MyExchange", "direct", false, false, false, false);

DeclareQueue Method (AMQPClassic Component)

Verifies that a queue exists, potentially creating it if necessary.

Syntax

void __fastcall DeclareQueue(String ChannelName, String QueueName, bool Passive, bool Durable, bool Exclusive, bool AutoDelete, bool NoWait);

Remarks

This method is used to verify that a queue named QueueName exists; and potentially creates it if no such queue exists.

After each successful call to this method, the component populates the QueueMessageCount property, as well as the QueueConsumerCount and QueueName configuration settings. Refer to each one for more information.

ChannelName controls what channel the component will send the request over. While any channel can technically be used, keep in mind that the server will close it if a channel error occurs. For this reason, it is good practice to make requests such as this one using a channel that is not involved in message publishing or consumption.

If creating a new queue, empty string can be passed for QueueName to have the server automatically generate a name for the new queue (which can then be retrieved using the QueueName configuration setting). In all other cases, QueueName must be a non-empty string consisting only of letters, digits, hyphens, underscores, periods, and colons. It must be no longer than 255 characters, and must not begin with amq. unless the Passive parameter is True.

If Passive is True, the server will only verify that a queue with the given QueueName actually exists (regardless of how it is configured).

If Passive is False, and no queue named QueueName currently exists, the server will create one.

If Passive is False, and there is a preexisting queue named QueueName, the server will verify that its current configuration matches the given parameters and arguments.

Durable specifies what happens to the queue in the event of a server restart. Durable queue will be recreated, while non-durable (transient) queue will not. (Note that the messages in durable queues will still be lost unless they are marked as persistent.)

Exclusive, if True, indicates that the queue may only be accessed by the current connection. Exclusive queues are deleted when the current connection closes.

AutoDelete specifies whether the server should automatically delete the queue when all consumers have finished using it. (Note that auto-delete queues aren't eligible for deletion until after a consumer attaches to them for the first time.)

The NoWait parameter, if True, will cause the server to execute the request asynchronously. For asynchronous request handling, the server only sends back a response in case of an error.

Additional arguments may be sent with this request by adding them to the Arguments collection. Arguments are server-dependent; refer to your server's documentation to determine if any additional arguments apply for this request.

An exception is thrown if no channel with the given ChannelName exists, if QueueName empty string and NoWait is True, or if the server returns an error because:

• One of the parameter constraints described above was violated.
• One of the verification cases described above fails.
• An attempt was made to verify (i.e., the Passive parameter was True) another connection's exclusive queue.

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

Declaring a Queue // Declare a queue. amqpc1.DeclareQueue("channel", "MyQueue", false, false, false, false, false);

DeleteExchange Method (AMQPClassic Component)

Deletes an exchange.

Syntax

void __fastcall DeleteExchange(String ChannelName, String ExchangeName, bool IfUnused, bool NoWait);

Remarks

This method is used to delete an exchange.

ChannelName controls what channel the component will send the request over. While any channel can technically be used, keep in mind that the server will close it if a channel error occurs. For this reason, it is good practice to make requests such as this one using a channel that is not involved in message publishing or consumption.

ExchangeName must be a non-empty string consisting only of letters, digits, hyphens, underscores, periods, and colons. It must be no longer than 255 characters, and must not begin with amq..

When IfUnused is True, the server will only delete the exchange if no queues are bound to it.

The NoWait parameter, if True, will cause the server to execute the request asynchronously. For asynchronous request handling, the server only sends back a response in case of an error.

An exception is thrown if no channel with the given ChannelName exists, or if the server returns an error because:

• The value passed for ExchangeName fails one or more of the constraints described above.
• No exchange named ExchangeName exists. (This does not apply for RabbitMQ; attempting to delete a non-existent exchange will always succeed.)
• The IfUnused parameter was True, but the exchange still had one or more queues bound to it.

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

DeleteQueue Method (AMQPClassic Component)

Deletes a queue.

Syntax

void __fastcall DeleteQueue(String ChannelName, String QueueName, bool IfUnused, bool IfEmpty, bool NoWait);

Remarks

This method is used to delete the queue named QueueName.

After each successful call to this method, the component populates the QueueMessageCount property with the number of messages deleted along with the queue. (Note that this does not occur if the NoWait parameter is set to True.)

ChannelName controls what channel the component will send the request over. While any channel can technically be used, keep in mind that the server will close it if a channel error occurs. For this reason, it is good practice to make requests such as this one using a channel that is not involved in message publishing or consumption.

QueueName must be a non-empty string consisting only of letters, digits, hyphens, underscores, periods, and colons. It must be no longer than 255 characters, and must not begin with amq..

When IfUnused is True, the server will only delete the queue if no consumers are attached to it.

When IfEmpty is True, the server will only delete the queue if it has no messages in it. (When IfEmpty is False, servers will typically move any remaining messages to a dead-letter queue, if one is available.)

The NoWait parameter, if True, will cause the server to execute the request asynchronously. For asynchronous request handling, the server only sends back a response in case of an error.

An exception is thrown if no channel with the given ChannelName exists, or if the server returns an error because:

• The value passed for QueueName fails one or more of the constraints described above.
• No queue named QueueName exists. (This does not apply for RabbitMQ; attempting to delete a non-existent queue will always succeed.)
• The IfUnused parameter was True, but the queue still had one or more consumers attached to it.
• The IfEmpty parameter was True, but the queue still had one or more messages in it.

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

Disconnect Method (AMQPClassic Component)

This method disconnects from the remote host.

Syntax

void __fastcall Disconnect();

Remarks

This method disconnects from the remote host. Calling this method is equivalent to setting the Connected property to False.

DoEvents Method (AMQPClassic Component)

This method processes events from the internal message queue.

Syntax

void __fastcall DoEvents();

Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns.

EnablePublishConfirms Method (AMQPClassic Component)

Enables publish confirmations mode for a channel.

Syntax

void __fastcall EnablePublishConfirms(String ChannelName, bool NoWait);

Remarks

This method enables publish confirmations mode for the channel with the given ChannelName.

While a channel is in publish confirmations mode, the server will acknowledge each message published by the component. The component will wait to fire the MessageOut event until it receives this acknowledgment. (Note that this mode is only available when the RabbitMQCompatible configuration setting is enabled.)

Note that a channel will stay in publish confirmations mode, once enabled, until it is deleted.

The NoWait parameter, if True, will cause the server to execute the request asynchronously. For asynchronous request handling, the server only sends back a response in case of an error.

An exception is thrown if the RabbitMQCompatible configuration setting is currently False, if no channel with the given ChannelName exists, or if EnableTransactionMode has been called for the specified channel previously.

EnableTransactionMode Method (AMQPClassic Component)

Enables transaction mode for a channel.

Syntax

void __fastcall EnableTransactionMode(String ChannelName);

Remarks

This method enables transaction mode for the channel with the given ChannelName.

While a channel is in transaction mode, all messages published and acknowledgements sent over it will be part of a transaction, and the server will wait to process them until the transaction is either committed or rolled back.

To commit the current transaction on a channel, call CommitTransaction; and to roll it back (and discard the messages and acknowledgements that were part of it), call RollbackTransaction.

Keep in mind that, according to the AMQP 0.9.1 specification:

• A new transaction is always started immediately after committing or rolling back the current one, which means that...
• ...a channel will stay in transaction mode, once enabled, until it is deleted.
• Transactions are only guaranteed to be atomic if all messages published and acknowledgements sent affect a single queue.
• Any messages published on a channel in transaction mode that have the Mandatory or Immediate flags set are not guaranteed to be included in the transaction.

An exception is thrown if no channel with the given ChannelName exists, or if EnablePublishConfirms has been called for the specified channel previously.

Interrupt Method (AMQPClassic Component)

Interrupt the current action and disconnects from the remote host.

Syntax

void __fastcall Interrupt();

Remarks

This method will interrupt the current method (if applicable) and cause the component to disconnect from the remote host.

PublishMessage Method (AMQPClassic Component)

Publishes a message.

Syntax

void __fastcall PublishMessage(String ChannelName, String ExchangeName, String RoutingKey, bool Mandatory, bool Immediate);

Remarks

This method is used to publish the message specified by the Message property to the exchange named ExchangeName over the channel specified by ChannelName.

When this method is called, the message to publish is immediately added to the OutgoingMessages collection, and the MessageOut event fires once it has been sent (or, if the specified channel is in "publish confirmations" mode, after the server has acknowledged it).

Note that all AMQP 0.9.1 servers automatically bind all queues to their default exchange (which is always a direct exchange with no name) using each queue's name as the binding's routing key. This makes it easy to send a message to a specific queue without having to declare bindings; just call PublishMessage, pass empty string for ExchangeName, and the name of the desired queue for RoutingKey.

Note that messages published over channels which are in either transaction or "publish confirmations" mode may be handled differently than they would be on a channel in normal mode. Refer to the EnableTransactionMode and EnablePublishConfirms methods for more information about what each mode entails.

The server's default exchange may be specified by passing empty string for ExchangeName. Otherwise, ExchangeName must be a non-empty string consisting only of letters, digits, hyphens, underscores, periods, and colons. It must be no longer than 255 characters.

The RoutingKey parameter specifies the message's routing key. Whether this parameter needs to be non-empty, and what format it should have if so, depends on the type of exchange it is being sent to. Some exchange types may use information included with the message, such as its MessageHeaders. Refer to BindQueue for more information about how routing keys are used, and to your server's documentation for information on what it expects.

The Mandatory parameter controls what the server should do if the message can't be routed to any queue (either because it isn't eligible for any of the queues bound to the specified exchange because of how their bindings are configured, or because no queues are bound to the exchange in the first place). If True, the server will return the message, at which point the MessageReturned event will be fired. If False, the server will drop the message.

The Immediate parameter controls what the server should do if the message can't be immediately delivered to any consumer (either because it cannot be routed to a queue, or because the queues it can be routed to have no active consumers attached to them). If True, the server will return the message, at which point the MessageReturned event will be fired. If False, the server will queue the message if possible, or drop it if not.

An exception is thrown if no channel with the given ChannelName exists, or if the server returns an error because:

• The value passed for ExchangeName fails one or more of the constraints described above.
• No exchange named ExchangeName exists.
• The message is rejected for some reason.

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

Publishing a Message amqpc1.Message.Body = "Hello, world!"; // Publish a message to the server's default (no-name) exchange, using the name of a specific queue as the routing key. amqpc1.PublishMessage("channel", "", "MyQueue", false, false); // Publish a message to the "MyExchange" exchange, using the routing key "MyRoutingKey". amqpc1.PublishMessage("channel", "MyExchange", "MyRoutingKey", false, false);

PurgeQueue Method (AMQPClassic Component)

Purges all messages from a queue.

Syntax

void __fastcall PurgeQueue(String ChannelName, String QueueName, bool NoWait);

Remarks

This method purges all messages from the queue named QueueName. Messages which have been sent but are awaiting acknowledgment are not affected.

After each successful call to this method, the component populates the QueueMessageCount property with the number of messages purged from the queue. (Note that this does not occur if the NoWait parameter is set to True.)

ChannelName controls what channel the component will send the request over. While any channel can technically be used, keep in mind that the server will close it if a channel error occurs. For this reason, it is good practice to make requests such as this one using a channel that is not involved in message publishing or consumption.

QueueName must be a non-empty string consisting only of letters, digits, hyphens, underscores, periods, and colons. It must be no longer than 255 characters.

The NoWait parameter, if True, will cause the server to execute the request asynchronously. For asynchronous request handling, the server only sends back a response in case of an error.

An exception is thrown if no channel with the given ChannelName exists, or if the server returns an error because no queue named QueueName exists.

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

Recover Method (AMQPClassic Component)

Request that the server redeliver all messages on a given channel that have not been acknowledged.

Syntax

void __fastcall Recover(String ChannelName, bool Requeue);

Remarks

This method is used to request that the server redeliver all messages that it previously sent to the component on the channel specified by ChannelName which are still awaiting acknowledgment.

A call to this method may cause the server to redeliver zero or more messages over the channel specified by ChannelName. Those messages will cause the MessageIn event to fire with its Redelivered event parameter set to True.

The Requeue parameter controls how the server should attempt to redeliver the messages awaiting acknowledgment. If set to True, the server will simple put the messages back on their original queues, and they will be delivered like any other queued messages (potentially to other consumers). If set to False, the server will redeliver the messages to the component directly.

An exception is thrown if no channel with the given ChannelName exists, or (for RabbitMQ only) if the server returns an error because Requeue was False. (RabbitMQ only supports setting Requeue to True.)

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

Reset Method (AMQPClassic Component)

This method will reset the component.

Syntax

void __fastcall Reset();

Remarks

This method will reset the component's properties to their default values.

ResetMessage Method (AMQPClassic Component)

Resets the Message properties.

Syntax

void __fastcall ResetMessage();

Remarks

This method resets the Message property.

RetrieveMessage Method (AMQPClassic Component)

Attempts to retrieve a message from a given queue.

Syntax

void __fastcall RetrieveMessage(String ChannelName, String QueueName, bool NoAck);

Remarks

This method attempts to retrieve a message from the queue named QueueName over the channel named ChannelName.

If a message is retrieved as a result of this method being called, it is immediately added to the IncomingMessages collection, the ReceivedMessage property is populated, and the MessageIn event fires.

Even if no message gets retrieved, the MessageIn event will still fire as long as the request was successful. The server returns the number of available messages in the specified queue in response to all successful retrieve requests, and that count is exposed by MessageIn event's MessageCount parameter. Refer to the MessageIn event for more information.

QueueName must be a non-empty string consisting only of letters, digits, hyphens, underscores, periods, and colons. It must be no longer than 255 characters.

The NoAck parameter controls whether the server will expect the component to acknowledge the retrieved message. Refer to MessageIn for more information about acknowledging messages.

An exception is thrown if no channel with the given ChannelName exists, or if the server returns an error because:

• No queue with the given QueueName exists.
• The specified queue exists, but is locked or otherwise unavailable to consume from (e.g., an exclusive consumer might be attached to it).

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

Receiving a Message // MessageIn event handler. amqpc1.OnMessageIn += (s, e) => { if (e.MessageCount == -1) { // The server pushed a message to us asynchronously due to a consumer we created. Console.WriteLine("The server pushed this message to us via consumer '" + e.ConsumerTag + "':"); Console.WriteLine(amqpc1.ReceivedMessage.Body); } else if (e.DeliveryTag > 0) { // We pulled a message from a queue with the RetrieveMessage() method. Console.WriteLine("Message successfully pulled:"); Console.WriteLine(amqpc1.ReceivedMessage.Body); Console.WriteLine(e.MessageCount + " messages are still available to pull."); } else { // We tried to pull a message, but there were none available to pull. Console.WriteLine("No messages available to pull."); } }; // Attach a consumer to "MyQueue". amqpc1.Consume("channel", "MyQueue", "consumerTag", false, true, false, false); // Or, try to retrieve a message from "MyQueue". amqpc1.RetrieveMessage("channel", "MyQueue", true);

RollbackTransaction Method (AMQPClassic Component)

Rolls back the current transaction for a channel.

Syntax

void __fastcall RollbackTransaction(String ChannelName);

Remarks

This method rolls back the current transaction for the channel with the given ChannelName. A new transaction is started immediately after the current one is rolled back.

Refer to EnableTransactionMode for more information about transactions.

An exception is thrown if a channel with the given ChannelName doesn't exist, or if the server returns an error because the channel does not have transaction mode enabled.

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

SetChannelAccept Method (AMQPClassic Component)

Disables or enables message acceptance for a given channel.

Syntax

void __fastcall SetChannelAccept(String ChannelName, bool Accept);

Remarks

This method is used to disable and enable message acceptance for the channel specified by ChannelName.

A channel is always configured to accept messages when first created, allowing the server to freely deliver messages to the component for any consumers that have been created on that channel using the Consume method.

Disabling message acceptance for a channel prevents the server from automatically delivering messages to the component over it; however, it is still possible to use the RetrieveMessage method to synchronously attempt to retrieve a message on a channel with message acceptance disabled.

An exception is thrown if no channel with the given ChannelName exists, or (for RabbitMQ only) if the server returns an error because Accept was False. (RabbitMQ does not support disabling message acceptance.)

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

SetQoS Method (AMQPClassic Component)

Requests a specific quality of service (QoS).

Syntax

void __fastcall SetQoS(String ChannelName, int PrefetchSize, int PrefetchCount, bool Global);

Remarks

This method is used to request a specific quality of service for a certain scope. When the PrefetchSize and/or PrefetchCount are set for a certain scope, the server will limit how many messages it sends to the component before stopping to wait for one or more of them to be acknowledged.

ChannelName is the name of the channel which is used to send the request. Depending on the server and what Global is set to, it may also be significant to the request itself (refer to the Global parameter's description, below, for more information).

PrefetchSize specifies a window size in bytes; i.e., the server will stop sending messages if the total size of all of the currently unacknowledged messages already sent, plus the size of the next message that could be sent, exceeds PrefetchSize bytes. A PrefetchSize of 0 indicates no limit. (Note that RabbitMQ does not support prefetch size limits.)

PrefetchCount specifies the number of unacknowledged messages the server will limit itself to sending. A PrefetchCount of 0 indicates no limit.

Global specifies the scope which the QoS request should apply to. It is interpreted differently based on whether the server is RabbitMQ or not. Refer to this table:

Keep the following things in mind when using QoS:

• The limits specified by a QoS request only affect messages that require acknowledgment.
• How the server chooses to handle interactions between QoS settings at different scopes is server-dependent.

An exception is thrown if no channel with the given ChannelName exists, or if the server returns an error for any reason.

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

UnbindQueue Method (AMQPClassic Component)

Removes a previously-created queue binding.

Syntax

void __fastcall UnbindQueue(String ChannelName, String QueueName, String ExchangeName, String RoutingKey);

Remarks

This method removes a previously-created queue binding.

ChannelName controls what channel the component will send the request over. While any channel can technically be used, keep in mind that the server will close it if a channel error occurs. For this reason, it is good practice to make requests such as this one using a channel that is not involved in message publishing or consumption.

QueueName must be a non-empty string consisting only of letters, digits, hyphens, underscores, periods, and colons. It must be no longer than 255 characters.

The server's default exchange may be specified by passing empty string for ExchangeName. Otherwise, ExchangeName must be a non-empty string consisting only of letters, digits, hyphens, underscores, periods, and colons. It must be no longer than 255 characters.

RoutingKey should be the same routing key used when originally creating the binding that is to be removed. For bindings created using arguments instead of a routing key, the Arguments collection must contain the same items used originally instead.

An exception is thrown if no channel with the given ChannelName exists, or if the server returns an error because:

• No queue with the given QueueName exists. (Does not apply to RabbitMQ.)
• No exchange with the given ExchangeName exists. (Does not apply to RabbitMQ.)

Note that in AMQP, server errors are grouped into "connection errors" and "channel errors", and both are fatal. That is, if the server returns a channel error, it will then close the channel which caused the error; and if it returns a connection error, it will then close the connection. The AMQPClassic component's Error Codes page includes AMQP's various connection and channel errors.

ChannelReadyToSend Event (AMQPClassic Component)

Fires when a channel is ready to send messages.

Syntax

typedef struct {
  String ChannelName;
} TiotAMQPClassicChannelReadyToSendEventParams;
typedef void __fastcall (__closure *TiotAMQPClassicChannelReadyToSendEvent)(System::TObject* Sender, TiotAMQPClassicChannelReadyToSendEventParams *e);
__property TiotAMQPClassicChannelReadyToSendEvent OnChannelReadyToSend = { read=FOnChannelReadyToSend, write=FOnChannelReadyToSend };

Remarks

This event fires when a channel is ready to send messages.

ChannelName is the name of the channel.

Connected Event (AMQPClassic Component)

Fired immediately after a connection completes (or fails).

Syntax

typedef struct {
  int StatusCode;
  String Description;
} TiotAMQPClassicConnectedEventParams;
typedef void __fastcall (__closure *TiotAMQPClassicConnectedEvent)(System::TObject* Sender, TiotAMQPClassicConnectedEventParams *e);
__property TiotAMQPClassicConnectedEvent OnConnected = { read=FOnConnected, write=FOnConnected };

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

ConnectionStatus Event (AMQPClassic Component)

Fired to indicate changes in the connection state.

Syntax

typedef struct {
  String ConnectionEvent;
  int StatusCode;
  String Description;
} TiotAMQPClassicConnectionStatusEventParams;
typedef void __fastcall (__closure *TiotAMQPClassicConnectionStatusEvent)(System::TObject* Sender, TiotAMQPClassicConnectionStatusEventParams *e);
__property TiotAMQPClassicConnectionStatusEvent OnConnectionStatus = { read=FOnConnectionStatus, write=FOnConnectionStatus };

Remarks

This event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

Disconnected Event (AMQPClassic Component)

Fired when a connection is closed.

Syntax

typedef struct {
  int StatusCode;
  String Description;
} TiotAMQPClassicDisconnectedEventParams;
typedef void __fastcall (__closure *TiotAMQPClassicDisconnectedEvent)(System::TObject* Sender, TiotAMQPClassicDisconnectedEventParams *e);
__property TiotAMQPClassicDisconnectedEvent OnDisconnected = { read=FOnDisconnected, write=FOnDisconnected };

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.

Please refer to the Error Codes section for more information.

Error Event (AMQPClassic Component)

Fired when information is available about errors during data delivery.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TiotAMQPClassicErrorEventParams;
typedef void __fastcall (__closure *TiotAMQPClassicErrorEvent)(System::TObject* Sender, TiotAMQPClassicErrorEventParams *e);
__property TiotAMQPClassicErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

Log Event (AMQPClassic Component)

Fires once for each log message.

Syntax

typedef struct {
  int LogLevel;
  String Message;
  String LogType;
} TiotAMQPClassicLogEventParams;
typedef void __fastcall (__closure *TiotAMQPClassicLogEvent)(System::TObject* Sender, TiotAMQPClassicLogEventParams *e);
__property TiotAMQPClassicLogEvent OnLog = { read=FOnLog, write=FOnLog };

Remarks

This event fires once for each log message generated by the component. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of the Message. Possible values are:

LogType identifies the type of log entry. Possible values are:

• Info: General information about the component.
• Frame: Frame status messages.

MessageIn Event (AMQPClassic Component)

Fires when a message is received; as well as when an attempt is made to fetch a message from a currently empty queue.

Syntax

typedef struct {
  String ChannelName;
  String ConsumerTag;
  __int64 DeliveryTag;
  bool Redelivered;
  String ExchangeName;
  String RoutingKey;
  int MessageCount;
  int Accept;
} TiotAMQPClassicMessageInEventParams;
typedef void __fastcall (__closure *TiotAMQPClassicMessageInEvent)(System::TObject* Sender, TiotAMQPClassicMessageInEventParams *e);
__property TiotAMQPClassicMessageInEvent OnMessageIn = { read=FOnMessageIn, write=FOnMessageIn };

Remarks

This event fires anytime a message is received. There are two possible ways for the component to receive a message:

• Messages can be asynchronously pushed to the component from the server. At any point in time, the server may push a message to the component from a queue that the Consume method has been used to attach a consumer to.
• Messages can be synchronously pulled from the server by the component. The RetrieveMessage method is used to attempt to pull (or "retrieve") messages from a specific queue.

This event also fires anytime RetrieveMessage is called against a queue that currently has no messages available to pull. This is a special case, and results in only the ChannelName and MessageCount event parameters being populated.

Other than that special case, and any exceptions noted below, this event's parameters are populated the same way regardless of the manner in which messages are received.

ChannelName always reflects the name of the associated channel.

ConsumerTag reflects the consumer tag associated with the consumer that caused the server to push the message to the component. (ConsumerTag is always empty for messages pulled from the server by RetrieveMessage since no consumers are involved.)

DeliveryTag reflects the server-assigned, channel-specific delivery tag number for the incoming message.

Redelivered reflects whether the server is redelivering a message that is has delivered previously.

ExchangeName reflects the name of the exchange to which the incoming message was originally published. (If the message was originally published to the server's default exchange, whose name is always the empty string, ExchangeName will also be empty.)

RoutingKey reflects the routing key that the message was originally published with.

MessageCount is always -1 when this event fires due to a message being pushed to the component by the server. When this event fires as a result of RetrieveMessage being called, MessageCount reflects the number of messages still available in the queue the component tried to pull a message from (even if there were no messages available to pull).

The Accept parameter can be set to control how the component responds to the incoming message, if it needs to be acknowledged (if the message doesn't need to be acknowledged, the value set to the Accept parameter is ignored). Valid values are:

• 0 - default: Accept the message; send a positive acknowledgment.
• 1: Silently accept the message; don't send any acknowledgment.
• 2: Accept the message; send a cumulative positive acknowledgment coving this, and all previously unacknowledged, messages.
• 3: Reject the message; send a negative acknowledgment for it, and instruct the server not to return it to the queue.
• 4: Reject the message; send a negative acknowledgment for it, and instruct the server to return it to the queue.

If the value provided for the Accept parameter isn't one of those described above, the default (0) will be used instead.

Receiving a Message // MessageIn event handler. amqpc1.OnMessageIn += (s, e) => { if (e.MessageCount == -1) { // The server pushed a message to us asynchronously due to a consumer we created. Console.WriteLine("The server pushed this message to us via consumer '" + e.ConsumerTag + "':"); Console.WriteLine(amqpc1.ReceivedMessage.Body); } else if (e.DeliveryTag > 0) { // We pulled a message from a queue with the RetrieveMessage() method. Console.WriteLine("Message successfully pulled:"); Console.WriteLine(amqpc1.ReceivedMessage.Body); Console.WriteLine(e.MessageCount + " messages are still available to pull."); } else { // We tried to pull a message, but there were none available to pull. Console.WriteLine("No messages available to pull."); } }; // Attach a consumer to "MyQueue". amqpc1.Consume("channel", "MyQueue", "consumerTag", false, true, false, false); // Or, try to retrieve a message from "MyQueue". amqpc1.RetrieveMessage("channel", "MyQueue", true);

MessageOut Event (AMQPClassic Component)

Fires when a message is published.

Syntax

typedef struct {
  String ChannelName;
  String ExchangeName;
  String RoutingKey;
  String MessageId;
  __int64 DeliveryTag;
  bool Accepted;
} TiotAMQPClassicMessageOutEventParams;
typedef void __fastcall (__closure *TiotAMQPClassicMessageOutEvent)(System::TObject* Sender, TiotAMQPClassicMessageOutEventParams *e);
__property TiotAMQPClassicMessageOutEvent OnMessageOut = { read=FOnMessageOut, write=FOnMessageOut };

Remarks

This event fires anytime a message is published; or after an outgoing message has been acknowledged by the server, if the channel it was published on is in "publish confirmations" mode.

ChannelName reflects the name of the channel the message was published on.

ExchangeName reflects the name of the exchange the message was published to. (If the message was published to the server's default exchange, whose name is always the empty string, ExchangeName will also be empty.)

RoutingKey reflects the routing key that the message was published with.

MessageId reflects the message's unique Id, if one was set.

DeliveryTag reflects the channel-specific delivery tag number for the message. (Note that this is only populated for messages published on a channel in "publish confirmations" mode; otherwise it will be set to -1.)

Accepted indicates whether the server published back a positive True or negative False acknowledgment for the outgoing message. Note that this is only valid for messages published on a channel in "publish confirmations" mode; Accepted will always be True messages published on a channel in normal or transaction mode.

Refer to EnablePublishConfirms for more information about channels in "publish confirmations" mode.

MessageReturned Event (AMQPClassic Component)

Fires if a previously published message is returned by the server due to it being undeliverable.

Syntax

typedef struct {
  String ChannelName;
  int ReplyCode;
  String ReplyText;
  String ExchangeName;
  String RoutingKey;
} TiotAMQPClassicMessageReturnedEventParams;
typedef void __fastcall (__closure *TiotAMQPClassicMessageReturnedEvent)(System::TObject* Sender, TiotAMQPClassicMessageReturnedEventParams *e);
__property TiotAMQPClassicMessageReturnedEvent OnMessageReturned = { read=FOnMessageReturned, write=FOnMessageReturned };

Remarks

This event fires if the server returns a previously published message because it could not deliver it. Typically, messages are only undeliverable in one of the following situations:

• The message was originally published with the Mandatory option enabled, but there were no queues it could be routed to.
• The message was originally published with the Immediate option enabled, but there were no consumers it could be delivered to immediately on any queue it was routed to (or there were no queues it could be routed to).

The ReceivedMessage property will be populated with the returned message.

ChannelName reflects the name of the channel the message was originally published on.

ReplyCode will be an AMQP error code that indicates the reason why the message was returned. (Tip: The AMQPClassic component's Error Codes page includes the various AMQP error codes.)

ReplyText will be a message with further details about why the message was returned.

ExchangeName reflects the name of the exchange to which the message was originally published. (If the message was originally published to the server's default exchange, whose name is always the empty string, ExchangeName will also be empty.)

RoutingKey reflects the routing key that the message was originally published with.

SSLServerAuthentication Event (AMQPClassic Component)

Fired after the server presents its certificate to the client.

Syntax

typedef struct {
  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;
  String CertSubject;
  String CertIssuer;
  String Status;
  bool Accept;
} TiotAMQPClassicSSLServerAuthenticationEventParams;
typedef void __fastcall (__closure *TiotAMQPClassicSSLServerAuthenticationEvent)(System::TObject* Sender, TiotAMQPClassicSSLServerAuthenticationEventParams *e);
__property TiotAMQPClassicSSLServerAuthenticationEvent OnSSLServerAuthentication = { read=FOnSSLServerAuthentication, write=FOnSSLServerAuthentication };

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (AMQPClassic Component)

Fired when secure connection progress messages are available.

Syntax

typedef struct {
  String Message;
} TiotAMQPClassicSSLStatusEventParams;
typedef void __fastcall (__closure *TiotAMQPClassicSSLStatusEvent)(System::TObject* Sender, TiotAMQPClassicSSLStatusEventParams *e);
__property TiotAMQPClassicSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

Config Settings (AMQPClassic Component)

AMQPClassic Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----