XMPP Component

Properties   Methods   Events   Config Settings   Errors  

The XMPP Component is used to create a lightweight messaging client using the XMPP (Jabber) protocol.

Syntax

TiotXMPP

Remarks

The XMPP component supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections. When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL-related settings are also supported through the Config method.

A call to the ConnectTo method will perform the entire logon process after which a Connected event will fire to indicate the connection status. For simplicity, the entire interface is synchronous; the component will not return until a call is completed.

After a successful connection, the component will automatically begin the process of receiving the user's buddy list. The component will parse the XML as it comes in from the server and will set the appropriate properties. Once the entire buddy list has been retrieved, a Sync event will fire.

Sending a message is as simple as calling a single method. One call to the SendMessage method will cause the component to connect if it has not already done so, send the specified message to a specified user, and return to the original connection state.

The XMPP Component interface supports messaging, list, and presence management. Other features of the XMPP protocol are supported through the SendCommand method and PITrail event.

Example 1. Connecting and Sending a Message:

IMControl.ConnectTo("myusername", "mypassword") IMControl.MessageText = "My Message" IMControl.SendMessage("ToUser") Example 2. Sending a Single Message:

IMControl.User = "myusername" IMControl.Password = "mypassword" IMControl.MessageText = "My Message" IMControl.SendMessage("ToUser")

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AuthDomain Property (XMPP Component)

This property includes the domain under which the user will be authenticated.

Syntax

__property String AuthDomain = { read=FAuthDomain, write=FSetAuthDomain };

Default Value

""

Remarks

Set this value if the user must authenticate through a third-party authentication service that requires a different domain than the XMPP user's registered domain.

Data Type

String

AuthMethods Property (XMPP Component)

This property controls how the component authenticates itself with the XMPP server.

Syntax

__property String AuthMethods = { read=FAuthMethods, write=FSetAuthMethods };

Default Value

"*"

Remarks

AuthMethods is a comma-separated list of authentication methods to be enabled on the component, listed in order of preference. When authenticating, the component will pick the first method in the list that is supported by the server.

The special value * (default) may be supplied to cause the component to enable all supported authentication methods in order of presumed security. The XMPP component currently supports the following values for AuthMethods, listed in order of most secure to least secure:

• SASL/DIGEST-MD5
• AuthIQ/Digest
• SASL/CRAM-MD5
• SASL/PLAIN
• AuthIQ/Plaintext
• SASL/NTLM

Data Type

String

BuddyCount Property (XMPP Component)

The number of records in the Buddy arrays.

Syntax

__property int BuddyCount = { read=FBuddyCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• BuddyGroup
• BuddyId
• BuddyNickName
• BuddyRealName
• BuddySubscription

The array indices start at 0 and end at BuddyCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

BuddyGroup Property (XMPP Component)

This property holds a comma-separated list of the buddy's associated groups.

Syntax

__property String BuddyGroup[int BuddyIndex] = { read=FBuddyGroup };

Default Value

""

Remarks

This property holds a comma-separated list of the buddy's associated groups.

After the Sync event has fired, this property will contain a comma-separated list of groups for the associated BuddyId. Call the UpdateBuddyGroup method to update the buddy's group associations.

The BuddyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BuddyCount property.

This property is read-only and not available at design time.

Data Type

String

BuddyId Property (XMPP Component)

This property is the jabber Id of the buddy.

Syntax

__property String BuddyId[int BuddyIndex] = { read=FBuddyId };

Default Value

""

Remarks

This property is the jabber Id of the buddy.

After a Sync event is fired, this property will contain the user Id associated with the corresponding entry in the buddy list. If a buddy has multiple entries (e.g., if the buddy is listed in several groups), more than one entry will be the same.

The BuddyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BuddyCount property.

This property is read-only and not available at design time.

Data Type

String

BuddyNickName Property (XMPP Component)

This property includes the nickname of the buddy, if one exists.

Syntax

__property String BuddyNickName[int BuddyIndex] = { read=FBuddyNickName, write=FSetBuddyNickName };

Default Value

""

Remarks

This property includes the nickname of the buddy, if one exists.

The BuddyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BuddyCount property.

This property is not available at design time.

Data Type

String

BuddyRealName Property (XMPP Component)

This property includes the real name of the buddy.

Syntax

__property String BuddyRealName[int BuddyIndex] = { read=FBuddyRealName };

Default Value

""

Remarks

This property includes the real name of the buddy.

The BuddyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BuddyCount property.

This property is read-only and not available at design time.

Data Type

String

BuddySubscription Property (XMPP Component)

This property includes a list of the buddy's subscription status types.

Syntax

__property TiotXMPPBuddySubscriptions BuddySubscription[int BuddyIndex] = { read=FBuddySubscription };

enum TiotXMPPBuddySubscriptions {
  stNone=0,
  stTo=1,
  stFrom=2,
  stBoth=3,
  stRemove=4
};

Default Value

stNone

Remarks

This property includes a list of the buddy's subscription status types.

After a Sync event is fired, this property will contain all of the types of subscriptions for the buddy. They are defined as follows:

The BuddyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BuddyCount property.

This property is read-only and not available at design time.

Data Type

Integer

Connected Property (XMPP Component)

This property indicates whether the component is connected and logged in.

Syntax

__property bool Connected = { read=FConnected };

Default Value

False

Remarks

This property indicates whether the component is connected and logged in to the remote host. Use the Connect and Disconnect methods to manage the connection.

This property is read-only and not available at design time.

Data Type

Boolean

FirewallAutoDetect Property (XMPP Component)

Whether to automatically detect and use firewall system settings, if available.

Syntax

__property bool FirewallAutoDetect = { read=FFirewallAutoDetect, write=FSetFirewallAutoDetect };

Default Value

False

Remarks

Whether to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (XMPP Component)

The type of firewall to connect through.

Syntax

__property TiotXMPPFirewallTypes FirewallType = { read=FFirewallType, write=FSetFirewallType };

enum TiotXMPPFirewallTypes {
  fwNone=0,
  fwTunnel=1,
  fwSOCKS4=2,
  fwSOCKS5=3,
  fwSOCKS4A=10
};

Default Value

fwNone

Remarks

The type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (XMPP Component)

The name or IP address of the firewall (optional).

Syntax

__property String FirewallHost = { read=FFirewallHost, write=FSetFirewallHost };

Default Value

""

Remarks

The name or IP address of the firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the component raises an exception.

Data Type

String

FirewallPassword Property (XMPP Component)

A password if authentication is to be used when connecting through the firewall.

Syntax

__property String FirewallPassword = { read=FFirewallPassword, write=FSetFirewallPassword };

Default Value

""

Remarks

A password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Data Type

String

FirewallPort Property (XMPP Component)

The Transmission Control Protocol (TCP) port for the firewall Host .

Syntax

__property int FirewallPort = { read=FFirewallPort, write=FSetFirewallPort };

Default Value

0

Remarks

The Transmission Control Protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (XMPP Component)

A username if authentication is to be used when connecting through a firewall.

Syntax

__property String FirewallUser = { read=FFirewallUser, write=FSetFirewallUser };

Default Value

""

Remarks

A username if authentication is to be used when connecting through a firewall. If FirewallHost is specified, this property and the FirewallPassword property are used to connect and authenticate to the given Firewall. If the authentication fails, the component raises an exception.

Data Type

String

IMPort Property (XMPP Component)

This property includes the server port for XMPP (default 5222).

Syntax

__property int IMPort = { read=FIMPort, write=FSetIMPort };

Default Value

5222

Remarks

For an implicit Secure Sockets Layer (SSL), use port 5223. For more information, please refer to the SSLStartMode property.

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.

Data Type

Integer

IMServer Property (XMPP Component)

This property is the instant messaging server.

Syntax

__property String IMServer = { read=FIMServer, write=FSetIMServer };

Default Value

""

Remarks

This is the instant messaging server to which the component will connect when the Connect method is called. The IMServer property must contain a valid XMPP (Jabber) server, or any subsequent calls to the Connect method will fail.

Data Type

String

LocalDirectory Property (XMPP Component)

This property includes the directory to which received files are saved.

Syntax

__property String LocalDirectory = { read=FLocalDirectory, write=FSetLocalDirectory };

Default Value

""

Remarks

This property specifies the directory on disk to which received files will be saved. If this property is not set and a file is received, the file data will be available through the Transfer event parameters. This property may also be set when the StartTransfer event fires.

Data Type

String

LocalFile Property (XMPP Component)

This property includes the path to the file that will be sent.

Syntax

__property String LocalFile = { read=FLocalFile, write=FSetLocalFile };

Default Value

""

Remarks

This property specifies the local file that will be sent when calling SendFile. This property must be set before calling SendFile.

Data Type

String

LocalHost Property (XMPP Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

__property String LocalHost = { read=FLocalHost, write=FSetLocalHost };

Default Value

""

Remarks

This property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the component initiate connections (or accept in the case of server components) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

Note: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

MessageHTML Property (XMPP Component)

This property includes the HTML version of the current message.

Syntax

__property String MessageHTML = { read=FMessageHTML, write=FSetMessageHTML };

Default Value

""

Remarks

If the user wishes to send any HTML as a part of the message, it must be set in the MessageHTML property. The HTML must be an entire HTML document, including the <html> and <body> tags. If the HTML has unbalanced tags, the XMPP component will fail with an error.

This property is not available at design time.

Data Type

String

MessageOtherData Property (XMPP Component)

This property contains extra data elements for the current message.

Syntax

__property String MessageOtherData = { read=FMessageOtherData, write=FSetMessageOtherData };

Default Value

""

Remarks

MessageOtherData will contain zero or more complete XML elements that are associated with the message but that are not defined in the Jabber specification.

Data Type

String

MessageSubject Property (XMPP Component)

This property is the subject of the current message.

Syntax

__property String MessageSubject = { read=FMessageSubject, write=FSetMessageSubject };

Default Value

""

Remarks

MessageSubject will contain any subject associated with the message. Most Jabber clients will ignore the subject unless the message is of type "headline".

This property is not available at design time.

Data Type

String

MessageText Property (XMPP Component)

This property is the plaintext version of the current message.

Syntax

__property String MessageText = { read=FMessageText, write=FSetMessageText };

Default Value

""

Remarks

MessageText is the plaintext version of the current message, taken from the message's "body" child element. The text in this property is automatically escaped to ensure valid XML parsing on the other end.

This property is not available at design time.

Data Type

String

MessageThread Property (XMPP Component)

This property is the thread name of the current message.

Syntax

__property String MessageThread = { read=FMessageThread, write=FSetMessageThread };

Default Value

""

Remarks

MessageThread will contain the name of the thread associated with the message. Threads are useful for tracking messages of type "chat" or "groupchat".

This property is not available at design time.

Data Type

String

MessageType Property (XMPP Component)

This property is the type of the current message.

Syntax

__property TiotXMPPMessageTypes MessageType = { read=FMessageType, write=FSetMessageType };

enum TiotXMPPMessageTypes {
  jmtNormal=0,
  jmtChat=1,
  jmtGroupChat=2,
  jmtHeadline=3,
  jmtError=4
};

Default Value

jmtNormal

Remarks

MessageType is the type of the message as specified in the XMPP RFC. The possible values are defined in the protocol specification as follows:

This property is not available at design time.

Data Type

Integer

Password Property (XMPP Component)

This property is the user's password.

Syntax

__property String Password = { read=FPassword, write=FSetPassword };

Default Value

""

Remarks

This property must be set before a connection is attempted. If a call to the Connect method is made specifying a password, then the Password property will contain that password.

Data Type

String

Presence Property (XMPP Component)

This property indicates the availability of the entity.

Syntax

__property TiotXMPPPresences Presence = { read=FPresence };

enum TiotXMPPPresences {
  pcOffline=0,
  pcChat=1,
  pcAway=2,
  pcXA=3,
  pcDND=4
};

Default Value

pcChat

Remarks

When the component completes the initial login, it will send information telling other entities subscribed to this entity's presence that it is online.

The Presence property has one of four values representing general information about the user's status as defined in the Jabber protocol specification:

By default, the component sets the client presence to pcChat, meaning that the user is available.

Note: Offline is not officially supported by the XMPP specification; however, some XMPP server implementations may recognize the value. Setting the client's presence state to this value may cause the server to respond with an Error.

The Status property is a pure-text string representing the user's presence information. Its value maybe be any random string, including the empty string, "".

If the application or user wishes to associate a specific status message with a new presence value, it should use the ChangePresence method. ChangePresence will update both the Presence and Status properties, and then send that information to the server.

This property is read-only and not available at design time.

Data Type

Integer

Resource Property (XMPP Component)

This property is the resource for the current session.

Syntax

__property String Resource = { read=FResource, write=FSetResource };

Default Value

"IPWorks XMPP Agent"

Remarks

Whenever an entity logs in to an XMPP (Jabber) server, it must provide account information as well as a resource. Resources allow multiple clients to log in using the same account. The server will forward all messages and PI data aimed at a specific resource to that resource. If a command or message is to be sent to a Jabber Id with no specified resource, the server will push that command or message out to all connected resources.

Data Type

String

ServerDomain Property (XMPP Component)

This property includes the XMPP server's domain.

Syntax

__property String ServerDomain = { read=FServerDomain, write=FSetServerDomain };

Default Value

""

Remarks

The domain of the XMPP server itself. Set this value if the domain of the server is different from the DNS name of the IMServer.

Data Type

String

SSLAcceptServerCertEffectiveDate Property (XMPP Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLAcceptServerCertEffectiveDate = { read=FSSLAcceptServerCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExpirationDate Property (XMPP Component)

The date on which the certificate expires.

Syntax

__property String SSLAcceptServerCertExpirationDate = { read=FSSLAcceptServerCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLAcceptServerCertExtendedKeyUsage Property (XMPP Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLAcceptServerCertExtendedKeyUsage = { read=FSSLAcceptServerCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprint Property (XMPP Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprint = { read=FSSLAcceptServerCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA1 Property (XMPP Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprintSHA1 = { read=FSSLAcceptServerCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLAcceptServerCertFingerprintSHA256 Property (XMPP Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLAcceptServerCertFingerprintSHA256 = { read=FSSLAcceptServerCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLAcceptServerCertIssuer Property (XMPP Component)

The issuer of the certificate.

Syntax

__property String SSLAcceptServerCertIssuer = { read=FSSLAcceptServerCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKey Property (XMPP Component)

The private key of the certificate (if available).

Syntax

__property String SSLAcceptServerCertPrivateKey = { read=FSSLAcceptServerCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLAcceptServerCertPrivateKey may be available but not exportable. In this case, SSLAcceptServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLAcceptServerCertPrivateKeyAvailable Property (XMPP Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLAcceptServerCertPrivateKeyAvailable = { read=FSSLAcceptServerCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLAcceptServerCertPrivateKey is available for the selected certificate. If SSLAcceptServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLAcceptServerCertPrivateKeyContainer Property (XMPP Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLAcceptServerCertPrivateKeyContainer = { read=FSSLAcceptServerCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLAcceptServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKey Property (XMPP Component)

The public key of the certificate.

Syntax

__property String SSLAcceptServerCertPublicKey = { read=FSSLAcceptServerCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyAlgorithm Property (XMPP Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLAcceptServerCertPublicKeyAlgorithm = { read=FSSLAcceptServerCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertPublicKeyLength Property (XMPP Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLAcceptServerCertPublicKeyLength = { read=FSSLAcceptServerCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertSerialNumber Property (XMPP Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLAcceptServerCertSerialNumber = { read=FSSLAcceptServerCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLAcceptServerCertSignatureAlgorithm Property (XMPP Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLAcceptServerCertSignatureAlgorithm = { read=FSSLAcceptServerCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLAcceptServerCertStore Property (XMPP Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLAcceptServerCertStore = { read=FSSLAcceptServerCertStore, write=FSetSSLAcceptServerCertStore };
__property DynamicArray<Byte> SSLAcceptServerCertStoreB = { read=FSSLAcceptServerCertStoreB, write=FSetSSLAcceptServerCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLAcceptServerCertStoreType property denotes the type of the certificate store specified by SSLAcceptServerCertStore. If the store is password-protected, specify the password in SSLAcceptServerCertStorePassword.

SSLAcceptServerCertStore is used in conjunction with the SSLAcceptServerCertSubject property to specify client certificates. If SSLAcceptServerCertStore has a value, and SSLAcceptServerCertSubject or SSLAcceptServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLAcceptServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SSLAcceptServerCertStorePassword Property (XMPP Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLAcceptServerCertStorePassword = { read=FSSLAcceptServerCertStorePassword, write=FSetSSLAcceptServerCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLAcceptServerCertStoreType Property (XMPP Component)

The type of certificate store for this certificate.

Syntax

__property TiotXMPPSSLAcceptServerCertStoreTypes SSLAcceptServerCertStoreType = { read=FSSLAcceptServerCertStoreType, write=FSetSSLAcceptServerCertStoreType };

enum TiotXMPPSSLAcceptServerCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLAcceptServerCertSubjectAltNames Property (XMPP Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLAcceptServerCertSubjectAltNames = { read=FSSLAcceptServerCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintMD5 Property (XMPP Component)

The MD5 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintMD5 = { read=FSSLAcceptServerCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA1 Property (XMPP Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintSHA1 = { read=FSSLAcceptServerCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertThumbprintSHA256 Property (XMPP Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLAcceptServerCertThumbprintSHA256 = { read=FSSLAcceptServerCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsage Property (XMPP Component)

The text description of UsageFlags .

Syntax

__property String SSLAcceptServerCertUsage = { read=FSSLAcceptServerCertUsage };

Default Value

""

Remarks

The text description of SSLAcceptServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLAcceptServerCertUsageFlags Property (XMPP Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLAcceptServerCertUsageFlags = { read=FSSLAcceptServerCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLAcceptServerCertUsageFlags is a combination of the following flags:

Please see the SSLAcceptServerCertUsage property for a text representation of SSLAcceptServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLAcceptServerCertVersion Property (XMPP Component)

The certificate's version number.

Syntax

__property String SSLAcceptServerCertVersion = { read=FSSLAcceptServerCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLAcceptServerCertSubject Property (XMPP Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLAcceptServerCertSubject = { read=FSSLAcceptServerCertSubject, write=FSetSSLAcceptServerCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLAcceptServerCertEncoded Property (XMPP Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLAcceptServerCertEncoded = { read=FSSLAcceptServerCertEncoded, write=FSetSSLAcceptServerCertEncoded };
__property DynamicArray<Byte> SSLAcceptServerCertEncodedB = { read=FSSLAcceptServerCertEncodedB, write=FSetSSLAcceptServerCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertEffectiveDate Property (XMPP Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLCertEffectiveDate = { read=FSSLCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLCertExpirationDate Property (XMPP Component)

The date on which the certificate expires.

Syntax

__property String SSLCertExpirationDate = { read=FSSLCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLCertExtendedKeyUsage Property (XMPP Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLCertExtendedKeyUsage = { read=FSSLCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLCertFingerprint Property (XMPP Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprint = { read=FSSLCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLCertFingerprintSHA1 Property (XMPP Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprintSHA1 = { read=FSSLCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLCertFingerprintSHA256 Property (XMPP Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLCertFingerprintSHA256 = { read=FSSLCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLCertIssuer Property (XMPP Component)

The issuer of the certificate.

Syntax

__property String SSLCertIssuer = { read=FSSLCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLCertPrivateKey Property (XMPP Component)

The private key of the certificate (if available).

Syntax

__property String SSLCertPrivateKey = { read=FSSLCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLCertPrivateKey may be available but not exportable. In this case, SSLCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLCertPrivateKeyAvailable Property (XMPP Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLCertPrivateKeyAvailable = { read=FSSLCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLCertPrivateKey is available for the selected certificate. If SSLCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLCertPrivateKeyContainer Property (XMPP Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLCertPrivateKeyContainer = { read=FSSLCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLCertPublicKey Property (XMPP Component)

The public key of the certificate.

Syntax

__property String SSLCertPublicKey = { read=FSSLCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLCertPublicKeyAlgorithm Property (XMPP Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLCertPublicKeyAlgorithm = { read=FSSLCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertPublicKeyLength Property (XMPP Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLCertPublicKeyLength = { read=FSSLCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLCertSerialNumber Property (XMPP Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLCertSerialNumber = { read=FSSLCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLCertSignatureAlgorithm Property (XMPP Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLCertSignatureAlgorithm = { read=FSSLCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLCertStore Property (XMPP Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore };
__property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password-protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

Data Type

Byte Array

SSLCertStorePassword Property (XMPP Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (XMPP Component)

The type of certificate store for this certificate.

Syntax

__property TiotXMPPSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };

enum TiotXMPPSSLCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubjectAltNames Property (XMPP Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLCertSubjectAltNames = { read=FSSLCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLCertThumbprintMD5 Property (XMPP Component)

The MD5 hash of the certificate.

Syntax

__property String SSLCertThumbprintMD5 = { read=FSSLCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA1 Property (XMPP Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLCertThumbprintSHA1 = { read=FSSLCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertThumbprintSHA256 Property (XMPP Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLCertThumbprintSHA256 = { read=FSSLCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLCertUsage Property (XMPP Component)

The text description of UsageFlags .

Syntax

__property String SSLCertUsage = { read=FSSLCertUsage };

Default Value

""

Remarks

The text description of SSLCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLCertUsageFlags Property (XMPP Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLCertUsageFlags = { read=FSSLCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLCertUsageFlags is a combination of the following flags:

Please see the SSLCertUsage property for a text representation of SSLCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLCertVersion Property (XMPP Component)

The certificate's version number.

Syntax

__property String SSLCertVersion = { read=FSSLCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLCertSubject Property (XMPP Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

Data Type

String

SSLCertEncoded Property (XMPP Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded };
__property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLEnabled Property (XMPP Component)

This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.

Syntax

__property bool SSLEnabled = { read=FSSLEnabled, write=FSetSSLEnabled };

Default Value

False

Remarks

This property specifies whether TLS/SSL is enabled in the component. When False (default), the component operates in plaintext mode. When True, TLS/SSL is enabled.

TLS/SSL may also be enabled by setting SSLStartMode. Setting SSLStartMode will automatically update this property value.

This property is not available at design time.

Data Type

Boolean

SSLProvider Property (XMPP Component)

The Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.

Syntax

__property TiotXMPPSSLProviders SSLProvider = { read=FSSLProvider, write=FSetSSLProvider };

enum TiotXMPPSSLProviders {
  sslpAutomatic=0,
  sslpPlatform=1,
  sslpInternal=2
};

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are as follows:

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected, the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used.

Data Type

Integer

SSLServerCertEffectiveDate Property (XMPP Component)

The date on which this certificate becomes valid.

Syntax

__property String SSLServerCertEffectiveDate = { read=FSSLServerCertEffectiveDate };

Default Value

""

Remarks

The date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2000 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExpirationDate Property (XMPP Component)

The date on which the certificate expires.

Syntax

__property String SSLServerCertExpirationDate = { read=FSSLServerCertExpirationDate };

Default Value

""

Remarks

The date on which the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:

23-Jan-2001 15:00:00.

This property is read-only.

Data Type

String

SSLServerCertExtendedKeyUsage Property (XMPP Component)

A comma-delimited list of extended key usage identifiers.

Syntax

__property String SSLServerCertExtendedKeyUsage = { read=FSSLServerCertExtendedKeyUsage };

Default Value

""

Remarks

A comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).

This property is read-only.

Data Type

String

SSLServerCertFingerprint Property (XMPP Component)

The hex-encoded, 16-byte MD5 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprint = { read=FSSLServerCertFingerprint };

Default Value

""

Remarks

The hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA1 Property (XMPP Component)

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprintSHA1 = { read=FSSLServerCertFingerprintSHA1 };

Default Value

""

Remarks

The hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84

This property is read-only.

Data Type

String

SSLServerCertFingerprintSHA256 Property (XMPP Component)

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate.

Syntax

__property String SSLServerCertFingerprintSHA256 = { read=FSSLServerCertFingerprintSHA256 };

Default Value

""

Remarks

The hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.

The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53

This property is read-only.

Data Type

String

SSLServerCertIssuer Property (XMPP Component)

The issuer of the certificate.

Syntax

__property String SSLServerCertIssuer = { read=FSSLServerCertIssuer };

Default Value

""

Remarks

The issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.

This property is read-only.

Data Type

String

SSLServerCertPrivateKey Property (XMPP Component)

The private key of the certificate (if available).

Syntax

__property String SSLServerCertPrivateKey = { read=FSSLServerCertPrivateKey };

Default Value

""

Remarks

The private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.

Note: The SSLServerCertPrivateKey may be available but not exportable. In this case, SSLServerCertPrivateKey returns an empty string.

This property is read-only.

Data Type

String

SSLServerCertPrivateKeyAvailable Property (XMPP Component)

Whether a PrivateKey is available for the selected certificate.

Syntax

__property bool SSLServerCertPrivateKeyAvailable = { read=FSSLServerCertPrivateKeyAvailable };

Default Value

false

Remarks

Whether a SSLServerCertPrivateKey is available for the selected certificate. If SSLServerCertPrivateKeyAvailable is True, the certificate may be used for authentication purposes (e.g., server authentication).

This property is read-only.

Data Type

Boolean

SSLServerCertPrivateKeyContainer Property (XMPP Component)

The name of the PrivateKey container for the certificate (if available).

Syntax

__property String SSLServerCertPrivateKeyContainer = { read=FSSLServerCertPrivateKeyContainer };

Default Value

""

Remarks

The name of the SSLServerCertPrivateKey container for the certificate (if available). This functionality is available only on Windows platforms.

This property is read-only.

Data Type

String

SSLServerCertPublicKey Property (XMPP Component)

The public key of the certificate.

Syntax

__property String SSLServerCertPublicKey = { read=FSSLServerCertPublicKey };

Default Value

""

Remarks

The public key of the certificate. The key is provided as PEM/Base64-encoded data.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyAlgorithm Property (XMPP Component)

The textual description of the certificate's public key algorithm.

Syntax

__property String SSLServerCertPublicKeyAlgorithm = { read=FSSLServerCertPublicKeyAlgorithm };

Default Value

""

Remarks

The textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertPublicKeyLength Property (XMPP Component)

The length of the certificate's public key (in bits).

Syntax

__property int SSLServerCertPublicKeyLength = { read=FSSLServerCertPublicKeyLength };

Default Value

0

Remarks

The length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.

This property is read-only.

Data Type

Integer

SSLServerCertSerialNumber Property (XMPP Component)

The serial number of the certificate encoded as a string.

Syntax

__property String SSLServerCertSerialNumber = { read=FSSLServerCertSerialNumber };

Default Value

""

Remarks

The serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.

This property is read-only.

Data Type

String

SSLServerCertSignatureAlgorithm Property (XMPP Component)

The text description of the certificate's signature algorithm.

Syntax

__property String SSLServerCertSignatureAlgorithm = { read=FSSLServerCertSignatureAlgorithm };

Default Value

""

Remarks

The text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.

This property is read-only.

Data Type

String

SSLServerCertStore Property (XMPP Component)

The name of the certificate store for the client certificate.

Syntax

__property String SSLServerCertStore = { read=FSSLServerCertStore };
__property DynamicArray<Byte> SSLServerCertStoreB = { read=FSSLServerCertStoreB };

Default Value

"MY"

Remarks

The name of the certificate store for the client certificate.

The SSLServerCertStoreType property denotes the type of the certificate store specified by SSLServerCertStore. If the store is password-protected, specify the password in SSLServerCertStorePassword.

SSLServerCertStore is used in conjunction with the SSLServerCertSubject property to specify client certificates. If SSLServerCertStore has a value, and SSLServerCertSubject or SSLServerCertEncoded is set, a search for a certificate is initiated. Please see the SSLServerCertSubject property for details.

Designations of certificate stores are platform dependent.

The following designations are the most common User and Machine certificate stores in Windows:

When the certificate store type is cstPFXFile, this property must be set to the name of the file. When the type is cstPFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).

This property is read-only.

Data Type

Byte Array

SSLServerCertStorePassword Property (XMPP Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLServerCertStorePassword = { read=FSSLServerCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

This property is read-only.

Data Type

String

SSLServerCertStoreType Property (XMPP Component)

The type of certificate store for this certificate.

Syntax

__property TiotXMPPSSLServerCertStoreTypes SSLServerCertStoreType = { read=FSSLServerCertStoreType };

enum TiotXMPPSSLServerCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

The type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used, the component will automatically determine the type. This property can take one of the following values:

This property is read-only.

Data Type

Integer

SSLServerCertSubjectAltNames Property (XMPP Component)

Comma-separated lists of alternative subject names for the certificate.

Syntax

__property String SSLServerCertSubjectAltNames = { read=FSSLServerCertSubjectAltNames };

Default Value

""

Remarks

Comma-separated lists of alternative subject names for the certificate.

This property is read-only.

Data Type

String

SSLServerCertThumbprintMD5 Property (XMPP Component)

The MD5 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintMD5 = { read=FSSLServerCertThumbprintMD5 };

Default Value

""

Remarks

The MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA1 Property (XMPP Component)

The SHA-1 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintSHA1 = { read=FSSLServerCertThumbprintSHA1 };

Default Value

""

Remarks

The SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertThumbprintSHA256 Property (XMPP Component)

The SHA-256 hash of the certificate.

Syntax

__property String SSLServerCertThumbprintSHA256 = { read=FSSLServerCertThumbprintSHA256 };

Default Value

""

Remarks

The SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.

This property is read-only.

Data Type

String

SSLServerCertUsage Property (XMPP Component)

The text description of UsageFlags .

Syntax

__property String SSLServerCertUsage = { read=FSSLServerCertUsage };

Default Value

""

Remarks

The text description of SSLServerCertUsageFlags.

This value will be one or more of the following strings and will be separated by commas:

• Digital Signature
• Non-Repudiation
• Key Encipherment
• Data Encipherment
• Key Agreement
• Certificate Signing
• CRL Signing
• Encipher Only

If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.

This property is read-only.

Data Type

String

SSLServerCertUsageFlags Property (XMPP Component)

The flags that show intended use for the certificate.

Syntax

__property int SSLServerCertUsageFlags = { read=FSSLServerCertUsageFlags };

Default Value

0

Remarks

The flags that show intended use for the certificate. The value of SSLServerCertUsageFlags is a combination of the following flags:

Please see the SSLServerCertUsage property for a text representation of SSLServerCertUsageFlags.

This functionality currently is not available when the provider is OpenSSL.

This property is read-only.

Data Type

Integer

SSLServerCertVersion Property (XMPP Component)

The certificate's version number.

Syntax

__property String SSLServerCertVersion = { read=FSSLServerCertVersion };

Default Value

""

Remarks

The certificate's version number. The possible values are the strings "V1", "V2", and "V3".

This property is read-only.

Data Type

String

SSLServerCertSubject Property (XMPP Component)

The subject of the certificate used for client authentication.

Syntax

__property String SSLServerCertSubject = { read=FSSLServerCertSubject };

Default Value

""

Remarks

The subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:

If a field value contains a comma, it must be quoted.

This property is read-only.

Data Type

String

SSLServerCertEncoded Property (XMPP Component)

The certificate (PEM/Base64 encoded).

Syntax

__property String SSLServerCertEncoded = { read=FSSLServerCertEncoded };
__property DynamicArray<Byte> SSLServerCertEncodedB = { read=FSSLServerCertEncodedB };

Default Value

""

Remarks

The certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Byte Array

SSLStartMode Property (XMPP Component)

This property determines how the component starts the Secure Sockets Layer (SSL) negotiation.

Syntax

__property TiotXMPPSSLStartModes SSLStartMode = { read=FSSLStartMode, write=FSetSSLStartMode };

enum TiotXMPPSSLStartModes {
  sslAutomatic=0,
  sslImplicit=1,
  sslExplicit=2,
  sslNone=3
};

Default Value

sslNone

Remarks

The SSLStartMode property may have one of the following values:

Data Type

Integer

Status Property (XMPP Component)

This property holds the description of the availability of this entity.

Syntax

__property String Status = { read=FStatus };

Default Value

"Available for Chat."

Remarks

When the component completes the initial login, it will send information telling other entities subscribed to this entity's presence that it is online.

The Presence property has one of four values representing general information about the user's status as defined in the Jabber protocol specification:

By default, the component sets the client presence to pcChat, meaning that the user is available.

Note: Offline is not officially supported by the XMPP specification; however, some XMPP server implementations may recognize the value. Setting the client's presence state to this value may cause the server to respond with an Error.

The Status property is a pure-text string representing the user's presence information. Its value maybe be any random string, including the empty string, "".

If the application or user wishes to associate a specific status message with a new presence value, it should use the ChangePresence method. ChangePresence will update both the Presence and Status properties, and then send that information to the server.

This property is read-only and not available at design time.

Data Type

String

Timeout Property (XMPP Component)

The timeout for the component.

Syntax

__property int Timeout = { read=FTimeout, write=FSetTimeout };

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the component will wait for the operation to complete before returning control.

The component will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.

If Timeout expires, and the operation is not yet complete, the component raises an exception.

Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

User Property (XMPP Component)

This property includes the user portion of this entity's Jabber Id.

Syntax

__property String User = { read=FUser, write=FSetUser };

Default Value

""

Remarks

The User property is a unique username associated with this entity and is set at the time of registration under the field "user".

Data Type

String

UserDomain Property (XMPP Component)

This property gets or sets the domain value used for Jabber Ids.

Syntax

__property String UserDomain = { read=FUserDomain, write=FSetUserDomain };

Default Value

""

Remarks

A Jabber Id (JID) is a unique identifier of the format "User@Domain/Resource". user@domain denotes the account by username and domain. The Resource is given during the login process to distinguish individual connections under the same account. If the IMServer contains multiple domains, this property setting allows the user to specify the domain under which to log in.

If Domain is empty, the value in IMServer is used by default when creating the client's JID.

Data Type

String

UserInfoCount Property (XMPP Component)

The number of records in the UserInfo arrays.

Syntax

__property int UserInfoCount = { read=FUserInfoCount, write=FSetUserInfoCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• UserInfoField
• UserInfoValue

The array indices start at 0 and end at UserInfoCount - 1.

This property is not available at design time.

Data Type

Integer

UserInfoField Property (XMPP Component)

This property includes the name of the current property necessary for registration.

Syntax

__property String UserInfoField[int FieldIndex] = { read=FUserInfoField, write=FSetUserInfoField };

Default Value

""

Remarks

This property includes the name of the current property necessary for registration.

Before a registration can be attempted, the application should use the QueryRegister method to poll the host to which the user wishes to register. This will gather all of the necessary fields that the user must send to the server and will populate the UserInfo properties accordingly. After a successful query, all entries in UserInfo values will be empty strings.

The possible registration fields are defined in the Jabber protocol specification, as follows:

After the user has set all of the values in UserInfo, and added any extra fields they may wish to include in their registration, the application should make a call to Register.

If the component is not already connected when this method is called, it will connect, poll the registration fields, and then disconnect.

The FieldIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UserInfoCount property.

This property is not available at design time.

Data Type

String

UserInfoValue Property (XMPP Component)

This property includes the value of the current registration property.

Syntax

__property String UserInfoValue[int FieldIndex] = { read=FUserInfoValue, write=FSetUserInfoValue };

Default Value

""

Remarks

This property includes the value of the current registration field. It should be set after calling QueryRegister and before calling Register.

Before a registration can be attempted, the application should use the QueryRegister method to poll the host to which the user wishes to register. This will gather all of the necessary fields that the user must send to the server and will populate the UserInfo properties accordingly. After a successful query, all entries in UserInfo values will be empty strings.

The possible registration fields are defined in the Jabber protocol specification, as follows:

After the user has set all of the values in UserInfo, and added any extra fields they may wish to include in their registration, the application should make a call to Register.

If the component is not already connected when this method is called, it will connect, poll the registration fields, and then disconnect.

The FieldIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UserInfoCount property.

This property is not available at design time.

Data Type

String

Add Method (XMPP Component)

This method will add an entity to this entity's roster.

Syntax

void __fastcall Add(String JabberId, String Name, String Groups);

Remarks

JabberId is the Jabber Id of the entity to be added. It should be of form "user@host". If no hostname is specified, the component will assume the user's account is with the server in IMServer, and will append that hostname to JabberId before sending the request.

Name will contain the name that is to be associated with JabberId in this entity's roster. It may be the empty string, "".

Groups is either the empty string ("") or a comma- separated list of groups to which the JabberId is to be added. If JabberId already exists in the buddy list, it will be updated to exist only in the specified groups. A buddy's group list can also be modified by the Buddies property.

The Add method will make a subscription request to the presence of the specified JabberId. Upon receiving this request, the server will add an entry into this user's buddy list with a subscription of type subscriptionNone (0) if there was no previous entry (if this user has already allowed JabberId to subscribe to this user's presence, there will already be an entry of type subscriptionFrom (2)). If the contact chooses to allow the subscription, the server will update the entry and a BuddyUpdate event will fire with the new subscription value (subscriptionTo (1) if this is a new contact, or subscriptionBoth (3) if the contact is now mutual).

The XMPP protocol permits XMPP (Jabber) clients to communicate with foreign IM networks, such as AIM, MSN, SMS, and others, through the use of gateway servers that translate between the foreign protocol and XMPP. When sending or receiving presence information, messages, or subscription requests, Domain will be a gateway for the foreign network on which the contact resides and with which this user has registered an account for that foreign network. The Register method can be used to register with a foreign network gateway.

Cancel Method (XMPP Component)

This method will cancel another entity's subscription to this entity's presence.

Syntax

void __fastcall Cancel(String JabberId);

Remarks

If for any reason the user should want to undo a previously granted subscription, this can be achieved through the Cancel method. The method will unsubscribe the target from this user's presence, thus preventing the target from seeing this user in the future.

ChangePassword Method (XMPP Component)

This method will change the current user's password.

Syntax

void __fastcall ChangePassword(String Password);

Remarks

This method changes the current user's password to the password that is specified. The component must be connected to the server when this method is called.

ChangePresence Method (XMPP Component)

This method will set the availability and status of this entity.

Syntax

void __fastcall ChangePresence(int PresenceCode, String Status);

Remarks

PresenceCode should correspond to the possible values of the Presence property:

By default, the component sets the client presence to pcChat, meaning that the user is available.

Note: Offline is not officially supported by the XMPP specification; however, some XMPP server implementations may recognize the value. Setting the client's presence state to this value may cause the server to respond with an Error.

Status can be any random string, including the empty string "".

Config Method (XMPP Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (XMPP Component)

This method will connect the component to the server.

Syntax

void __fastcall Connect();

Remarks

The Connect method performs the entire connection routine. This includes connection to the IMServer, authenticating with the specified User and Password, and session initialization.

The Connected event will fire once for the initial Transmission Control Protocol (TCP) connection and again when the XMPP Logon is complete.

ConnectTo Method (XMPP Component)

This method will connect the component to the server.

Syntax

void __fastcall ConnectTo(String User, String Password);

Remarks

The ConnectTo method performs the entire connection routine. This includes connection to the IMServer, user logon and authentication, and session initialization.

The Connected event will fire once for the initial Transmission Control Protocol (TCP) connection and again when the XMPP Logon is complete.

Because ConnectTo is called with a user and password specified, the User and Password properties will updated accordingly.

Disconnect Method (XMPP Component)

This method disconnects the component from the server.

Syntax

void __fastcall Disconnect();

Remarks

The Disconnect method will send the disconnect command to the notification server. Upon disconnection, a Disconnected event will be fired.

DoEvents Method (XMPP Component)

This method processes events from the internal message queue.

Syntax

void __fastcall DoEvents();

Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time and then returns.

Interrupt Method (XMPP Component)

This method interrupts the current method.

Syntax

void __fastcall Interrupt();

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

ProbePresence Method (XMPP Component)

Use this method to probe for another entity's presence.

Syntax

void __fastcall ProbePresence(String JabberId);

Remarks

In the case that the user needs to update a particular entity's presence, this method can be used to retrieve it. After a successful call, the server will either respond with the last known presence for Jabber or will send a presence element of type "error". In either case, the respond will be returned by a Presence event.

QueryRegister Method (XMPP Component)

This method queries a server for the necessary registration fields.

Syntax

void __fastcall QueryRegister(String XMPPServer);

Remarks

Before a registration can be attempted, the application should use the QueryRegister method to poll the host to which the user wishes to register. This will gather all of the necessary fields that the user must send to the server and will populate the UserInfo properties accordingly. After a successful query, all entries in UserInfo values will be empty strings.

The possible registration fields are defined in the Jabber protocol specification, as follows:

After the user has set all of the values in UserInfo, and added any extra fields they may wish to include in their registration, the application should make a call to Register.

If the component is not already connected when this method is called, it will connect, poll the registration fields, and then disconnect.

Register Method (XMPP Component)

This method registers an account with a server.

Syntax

void __fastcall Register(String XMPPServer);

Remarks

Before a registration can be attempted, the application should use the QueryRegister method to poll the host to which the user wishes to register. This will gather all of the necessary fields that the user must send to the server and will populate the UserInfo properties accordingly. After a successful query, all entries in UserInfo values will be empty strings.

The possible registration fields are defined in the Jabber protocol specification, as follows:

After the user has set all of the values in UserInfo, and added any extra fields they may wish to include in their registration, the application should make a call to Register.

If the component is not already connected when this method is called, it will connect, poll the registration fields, and then disconnect.

A new account can be registered at any time, including while the component is logged into the host under an existing account.

Remove Method (XMPP Component)

This method will remove an entity from this entity's roster.

Syntax

void __fastcall Remove(String JabberId, String Name, String Group);

Remarks

JabberId is the Jabber Id of the entity to be removed. It should be in the form of "user@host". If no hostname is specified, the component will assume the user's account is with the server in IMServer, and it will append that hostname to JabberId before sending the request.

Name should contain the name that is to be associated with JabberId in this entity's roster. It may be the empty string, "".

Groups may be either the empty string ("") or a comma- separated list of groups from which JabberId is to be removed. If no group is specified, the buddy will be completely removed from the buddy list.

After calling the Remove method, the server will remove the entry from the server-side roster and will push the result out to all connected resources. A BuddyUpdate event will fire with a subscription of type subscriptionRemove, and the entry will be removed from the Jabber component's internally stored list.

Reset Method (XMPP Component)

This method will reset the component.

Syntax

void __fastcall Reset();

Remarks

This method will reset the component's properties to their default values.

RetrieveRoster Method (XMPP Component)

This method will retrieve this entity's roster from the server.

Syntax

void __fastcall RetrieveRoster();

Remarks

After the component connects, it will automatically send a request to the server to retrieve the roster. If, however, the user or application wish to update the entire roster, this method may be used to do so.

After a successful call to the RetrieveRoster method, the server will respond with this entity's roster. The component will parse the roster and fire the Sync event once per item. This event may also fire for each entity added to or removed from the roster.

SendCommand Method (XMPP Component)

This method sends a command to the server.

Syntax

void __fastcall SendCommand(String Command);

Remarks

The SendCommand method will send the Command parameter to the server. The command must be in valid XML format and must be recognizable to the IMServer.

The SendCommand method should be used only by programmers or users who are connecting to nonstandard servers whose command list is not covered by the component. Any responses that are defined in the protocol specification will be returned by the appropriate event. Any nonstandard IQ message will be returned by the IQ event. All other responses will be returned by the PITrail event.

SendFile Method (XMPP Component)

This method sends a file to the specified user.

Syntax

void __fastcall SendFile(String JabberId);

Remarks

This method sends the file specified by LocalFile to the user specified by the JabberId parameter.

JabberId is the intended recipient of the message. It is of the form user@domain/resource. If a resource is not supplied, all logged-in instances of the user's account will receive the message.

The component supports sending files using In-Band Bystestreams as defined in XEP-0047 and XEP-0096.

SendMsg Method (XMPP Component)

This method will send a message to the specified user.

Syntax

String __fastcall SendMsg(String JabberId);

Remarks

SetUserInfoField Method (XMPP Component)

This method will add a user information field for registration.

Syntax

void __fastcall SetUserInfoField(String Field, String Value);

Remarks

This method will search through UserInfo for the field name in Field and set the corresponding value to Value. If the field was not previously contained in UserInfo, it will automatically be added.

Before a registration can be attempted, the application should use the QueryRegister method to poll the host to which the user wishes to register. This will gather all of the necessary fields that the user must send to the server and will populate the UserInfo properties accordingly. After a successful query, all entries in UserInfo values will be empty strings.

The possible registration fields are defined in the Jabber protocol specification, as follows:

After the user has set all of the values in UserInfo, and added any extra fields they may wish to include in their registration, the application should make a call to Register.

If the component is not already connected when this method is called, it will connect, poll the registration fields, and then disconnect.

SubscribeTo Method (XMPP Component)

Use this method to subscribe to another entity's presence.

Syntax

void __fastcall SubscribeTo(String JabberId);

Remarks

This method will send a request for a subscription to JabberId's presence. If the entity allows the subscription, a new item will be stored in the buddy list with the appropriate subscription type. Otherwise, no change will take place.

Unregister Method (XMPP Component)

This method cancels an account with the host.

Syntax

void __fastcall Unregister();

Remarks

If the user or application wishes to terminate an account with the IMServer it should make a call to this method. After a successful call, the account will be canceled and the component will be logged off the server, but not disconnected.

UnsubscribeTo Method (XMPP Component)

This method will cancel a subscription to another entity's presence.

Syntax

void __fastcall UnsubscribeTo(String JabberId);

Remarks

This method will inform the server of the cancellation of a subscription to JabberId's presence. After a successful call, the subscription type of the associated buddy list item will be updated.

UpdateBuddyGroup Method (XMPP Component)

This method updates the buddy's associated groups.

Syntax

void __fastcall UpdateBuddyGroup(int BuddyIndex, String Group);

Remarks

This method updates the associated groups for the buddy specified by BuddyIndex.

After the Sync event has fired, the BuddyGroup property is populated with a comma-separated list of groups for each buddy. To update the groups for a buddy, call this method with the buddy's index and the comma-separated list of groups the buddy should be associated with. Setting Group to an empty string ("") will cause the buddy to be completely disassociated from all groups.

BuddyUpdate Event (XMPP Component)

This event is fired whenever a roster entry is updated.

Syntax

typedef struct {
  int BuddyIdx;
} TiotXMPPBuddyUpdateEventParams;
typedef void __fastcall (__closure *TiotXMPPBuddyUpdateEvent)(System::TObject* Sender, TiotXMPPBuddyUpdateEventParams *e);
__property TiotXMPPBuddyUpdateEvent OnBuddyUpdate = { read=FOnBuddyUpdate, write=FOnBuddyUpdate };

Remarks

The BuddyUpdate event will fire whenever a new buddy list entry is added or an old entry is updated. The updated information can be retrieved through the Buddies properties property. The BuddyIdx parameter of this event will be the index of that XMPPBuddy in the properties.

Connected Event (XMPP Component)

This event is fired when a connection to the IM server is completed.

Syntax

typedef struct {
  int StatusCode;
  String Description;
} TiotXMPPConnectedEventParams;
typedef void __fastcall (__closure *TiotXMPPConnectedEvent)(System::TObject* Sender, TiotXMPPConnectedEventParams *e);
__property TiotXMPPConnectedEvent OnConnected = { read=FOnConnected, write=FOnConnected };

Remarks

If the connection is made normally, StatusCode is 0, and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

ConnectionStatus Event (XMPP Component)

Fired to indicate changes in the connection state.

Syntax

typedef struct {
  String ConnectionEvent;
  int StatusCode;
  String Description;
} TiotXMPPConnectionStatusEventParams;
typedef void __fastcall (__closure *TiotXMPPConnectionStatusEvent)(System::TObject* Sender, TiotXMPPConnectionStatusEventParams *e);
__property TiotXMPPConnectionStatusEvent OnConnectionStatus = { read=FOnConnectionStatus, write=FOnConnectionStatus };

Remarks

This event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

Disconnected Event (XMPP Component)

This event is fired when the chat service connection is lost.

Syntax

typedef struct {
  int StatusCode;
  String Description;
} TiotXMPPDisconnectedEventParams;
typedef void __fastcall (__closure *TiotXMPPDisconnectedEvent)(System::TObject* Sender, TiotXMPPDisconnectedEventParams *e);
__property TiotXMPPDisconnectedEvent OnDisconnected = { read=FOnDisconnected, write=FOnDisconnected };

Remarks

If the connection is broken normally, StatusCode is 0, and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.

Please refer to the Error Codes section for more information.

EndTransfer Event (XMPP Component)

This event is fired when a file transfer completes.

Syntax

typedef struct {
  int Direction;
  String FileId;
  String FileName;
  bool Success;
} TiotXMPPEndTransferEventParams;
typedef void __fastcall (__closure *TiotXMPPEndTransferEvent)(System::TObject* Sender, TiotXMPPEndTransferEventParams *e);
__property TiotXMPPEndTransferEvent OnEndTransfer = { read=FOnEndTransfer, write=FOnEndTransfer };

Remarks

When a file transfer completes, this event will fire.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (XMPP Component)

This event is fired when the server sends a protocol error message.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TiotXMPPErrorEventParams;
typedef void __fastcall (__closure *TiotXMPPErrorEvent)(System::TObject* Sender, TiotXMPPErrorEventParams *e);
__property TiotXMPPErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

This event is fired whenever there is a protocol error. ErrorCode will contain the error code string sent by the server. Description will contain the Xmpp component's interpretation of the code.

IQ Event (XMPP Component)

This event is fired for IQ messages not normally supported by the component.

Syntax

typedef struct {
  String Iq;
  String Id;
  String From;
  String IqType;
  bool Ignore;
} TiotXMPPIQEventParams;
typedef void __fastcall (__closure *TiotXMPPIQEvent)(System::TObject* Sender, TiotXMPPIQEventParams *e);
__property TiotXMPPIQEvent OnIQ = { read=FOnIQ, write=FOnIQ };

Remarks

Some servers may wish to gather some data from the client in ways not specified by the XMPP RFC. This event will contain any IQ message that is not a part of the Jabber specification. The Iq parameter will contain an entire XML entity, and thus it will require both knowledge of XML and knowledge of the possible contents of the IQ message to parse. Id will contain the transaction Id of the IQ message. From will contain the sender's Jabber Id. IqType will have one of the following values:

Note: To respond to these IQs, you may use the SendCommand method.

MessageIn Event (XMPP Component)

This event is fired upon receipt of a message.

Syntax

typedef struct {
  String MessageId;
  String From;
  String Domain;
  String Resource;
  int MessageType;
  String Subject;
  String MessageThread;
  String MessageText;
  String MessageHTML;
  String Other;
} TiotXMPPMessageInEventParams;
typedef void __fastcall (__closure *TiotXMPPMessageInEvent)(System::TObject* Sender, TiotXMPPMessageInEventParams *e);
__property TiotXMPPMessageInEvent OnMessageIn = { read=FOnMessageIn, write=FOnMessageIn };

Remarks

When a message is received, the XMPP component will parse the sender's Jabber Id into the From, Domain, and Resource fields. These parameters can be used to track the exact instance of a user's account that originated the message.

MessageId can be used with Jabber extension protocols. The MessageText parameter is the plaintext portion of the message body. MessageHTML will contain any HTML from the message.

Type is the type of message received. See MessageType for a list of possible values. For a message of type "headline", Subject will reflect the subject of the message. For a message of type "chat", Thread will report the conversation thread for which the current message is a follow-up.

Other will contain any extra data associated with the message but not defined by the XMPP-IM protocol.

PITrail Event (XMPP Component)

This event is fired for all protocol messages.

Syntax

typedef struct {
  int Direction;
  String Pi;
} TiotXMPPPITrailEventParams;
typedef void __fastcall (__closure *TiotXMPPPITrailEvent)(System::TObject* Sender, TiotXMPPPITrailEventParams *e);
__property TiotXMPPPITrailEvent OnPITrail = { read=FOnPITrail, write=FOnPITrail };

Remarks

The PITrail event is useful for debugging purposes. It shows all the interactions between the client and the server, line by line.

SessionId will hold the session number that originated the PI. A value of 0 is reserved for all PI dealing with the IMServer.

The direction parameter shows the originator of the message:

The Pi parameter contains the PI message.

Presence Event (XMPP Component)

This event is fired when the presence of a subscribed entity changes.

Syntax

typedef struct {
  String User;
  String Domain;
  String Resource;
  int Availability;
  String Status;
} TiotXMPPPresenceEventParams;
typedef void __fastcall (__closure *TiotXMPPPresenceEvent)(System::TObject* Sender, TiotXMPPPresenceEventParams *e);
__property TiotXMPPPresenceEvent OnPresence = { read=FOnPresence, write=FOnPresence };

Remarks

This event contains the availability and status information of a particular Jabber entity to whom this entity has a subscription.

Because a user can log in multiple times using the same account, the XMPP component will parse the user's Jabber Id into the User, Domain, and Resource parameters so that the client can easily track which instance of the account sent the presence.

The XMPP protocol permits XMPP (Jabber) clients to communicate with foreign IM networks, such as AIM, MSN, SMS, and others, through the use of gateway servers that translate between the foreign protocol and XMPP. When sending or receiving presence information, messages, or subscription requests, Domain will be a gateway for the foreign network on which the contact resides and with which this user has registered an account for that foreign network. The Register method can be used to register with a foreign network gateway.

Availability corresponds to the Presence property of the component, with the same possible values:

By default, the component sets the client presence to pcChat, meaning that the user is available.

Note: Offline is not officially supported by the XMPP specification; however, some XMPP server implementations may recognize the value. Setting the client's presence state to this value may cause the server to respond with an Error.

Status corresponds to the Status property. This value may be any random string, including the empty string, "".

ReadyToSend Event (XMPP Component)

This event is fired when the component is ready to send data.

Syntax

typedef struct {
} TiotXMPPReadyToSendEventParams;
typedef void __fastcall (__closure *TiotXMPPReadyToSendEvent)(System::TObject* Sender, TiotXMPPReadyToSendEventParams *e);
__property TiotXMPPReadyToSendEvent OnReadyToSend = { read=FOnReadyToSend, write=FOnReadyToSend };

Remarks

The ReadyToSend event indicates that the underlying Transmission Control Protocol (TCP)/IP subsystem is ready to accept data after a failed SendBytes. This event also is fired immediately after a connection to the remote host is established.

SSLServerAuthentication Event (XMPP Component)

Fired after the server presents its certificate to the client.

Syntax

typedef struct {
  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;
  String CertSubject;
  String CertIssuer;
  String Status;
  bool Accept;
} TiotXMPPSSLServerAuthenticationEventParams;
typedef void __fastcall (__closure *TiotXMPPSSLServerAuthenticationEvent)(System::TObject* Sender, TiotXMPPSSLServerAuthenticationEventParams *e);
__property TiotXMPPSSLServerAuthenticationEvent OnSSLServerAuthentication = { read=FOnSSLServerAuthentication, write=FOnSSLServerAuthentication };

Remarks

During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (XMPP Component)

Fired when secure connection progress messages are available.

Syntax

typedef struct {
  String Message;
} TiotXMPPSSLStatusEventParams;
typedef void __fastcall (__closure *TiotXMPPSSLStatusEvent)(System::TObject* Sender, TiotXMPPSSLStatusEventParams *e);
__property TiotXMPPSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };

Remarks

The event is fired for informational and logging purposes only. This event tracks the progress of the connection.

StartTransfer Event (XMPP Component)

This event is fired when a file transfer begins.

Syntax

typedef struct {
  int Direction;
  String FileId;
  String User;
  String Domain;
  String Resource;
  String FileName;
  String Datetime;
  __int64 Size;
  bool Accept;
} TiotXMPPStartTransferEventParams;
typedef void __fastcall (__closure *TiotXMPPStartTransferEvent)(System::TObject* Sender, TiotXMPPStartTransferEventParams *e);
__property TiotXMPPStartTransferEvent OnStartTransfer = { read=FOnStartTransfer, write=FOnStartTransfer };

Remarks

When a file is received, the XMPP component will parse the sender's Jabber Id into the User, Domain, and Resource fields. The FileId and FileName parameters identify the current transfer. Within this event, you may override the FileName by setting the FileName parameter. At this time, you may also set LocalDirectory if it is not already set.

When sending a file, the XMPP component will parse the receiver's Jabber Id into the User, Domain, and Resource fields.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

SubscriptionRequest Event (XMPP Component)

This event fires when a subscription request is received.

Syntax

typedef struct {
  String From;
  String Domain;
  bool Accept;
} TiotXMPPSubscriptionRequestEventParams;
typedef void __fastcall (__closure *TiotXMPPSubscriptionRequestEvent)(System::TObject* Sender, TiotXMPPSubscriptionRequestEventParams *e);
__property TiotXMPPSubscriptionRequestEvent OnSubscriptionRequest = { read=FOnSubscriptionRequest, write=FOnSubscriptionRequest };

Remarks

This event fires whenever another XMPP entity requests a subscription to this entity's presence. The XMPP component will parse the requesting entity's Jabber Id into the From and Domain parameters. It is not necessary to know which resource sent the request, because all instances of the requesting entity's account have access to the same roster.

Accept will initially be False, but setting it to True will cause the XMPP component to allow the remote subscription. Otherwise, the XMPP component will actively deny the subscription request.

Sync Event (XMPP Component)

This event fires upon a complete information synchronization with the server.

Syntax

typedef struct {
} TiotXMPPSyncEventParams;
typedef void __fastcall (__closure *TiotXMPPSyncEvent)(System::TObject* Sender, TiotXMPPSyncEventParams *e);
__property TiotXMPPSyncEvent OnSync = { read=FOnSync, write=FOnSync };

Remarks

The Sync event will fire after each successful call to the RetrieveRoster method. When the event fires, the buddy list, or roster, will be completely retrieved and the Buddies properties will be filled out accordingly:

Note: Please refer to Buddies properties property for more information.

Transfer Event (XMPP Component)

This event is fired during file transfer.

Syntax

typedef struct {
  int Direction;
  String FileId;
  String FileName;
  __int64 BytesTransferred;
  int PercentDone;
  String Text;
  DynamicArray<Byte> TextB;
  bool Cancel;
} TiotXMPPTransferEventParams;
typedef void __fastcall (__closure *TiotXMPPTransferEvent)(System::TObject* Sender, TiotXMPPTransferEventParams *e);
__property TiotXMPPTransferEvent OnTransfer = { read=FOnTransfer, write=FOnTransfer };

Remarks

This event will fire when sending or receiving. One or more Transfer events are fired during file transfer.

The BytesTransferred parameter shows the number of bytes transferred since the beginning of the transfer.

Text contains the portion of the file data being delivered.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone cannot be calculated, the value will be -1.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Config Settings (XMPP Component)

XMPP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert ...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert ...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
... Intermediate Cert...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
... Root Cert...
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

Trappable Errors (XMPP Component)

XMPP Errors

The component may also return one of the following error codes, which are inherited from other components.

TCPClient Errors

SSL Errors

TCP/IP Errors