XMLVerifier Class
Properties Methods Events Configuration Settings Errors
The XMLVerifier class verifies signed XML files.
Syntax
XMLVerifier
Remarks
Use this control to validate XML-SIG signatures. Note that this component only validates the signatures, but not the signing chains. To validate the signing chains, use XAdESVerifier.
Property List
The following is the full list of the properties of the class with short descriptions. Click on the links for further details.
AllSignaturesValid | The cumulative validity of all signatures. |
CanonicalizationMethod | The XML canonicalization method that was used for signing. |
DataFile | A file containing the external data covered by a detached signature. |
Encoding | Specifies XML encoding. |
FIPSMode | Reserved. |
HashAlgorithm | The hash algorithm used for signing. |
InputBytes | Use this property to pass the input to class in the byte array form. |
InputFile | A signed XML file. |
KnownCertCount | The number of records in the KnownCert arrays. |
KnownCertBytes | Returns raw certificate data in DER format. |
KnownCertHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
ReferenceCount | The number of records in the Reference arrays. |
ReferenceAutoGenerateElementId | Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing. |
ReferenceCanonicalizationMethod | Use this property to specify the canonicalization method for the transform of the reference. |
ReferenceCustomElementId | Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing. |
ReferenceDigestValue | Use this property to get or set the value of the digest calculated over the referenced data. |
ReferenceHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
ReferenceHashAlgorithm | Specifies the hash algorithm to be used. |
ReferenceHasURI | Specifies whether the URI is set (even when it is empty). |
ReferenceID | A user-defined identifier (ID) attribute of this Reference element. |
ReferenceInclusiveNamespacesPrefixList | Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference. |
ReferenceReferenceType | The Reference's type attribute as defined in XMLDSIG specification. |
ReferenceTargetData | Contains the referenced external data when the digest value is not explicitly specified. |
ReferenceTargetXMLElement | This property specifies the referenced XML element. |
ReferenceURI | Use this property to get or set the URL which references the data. |
ReferenceUseBase64Transform | Specifies whether Base64 transform is included in transform chain. |
ReferenceUseEnvelopedSignatureTransform | Specifies whether enveloped signature transform is included in transform chain. |
ReferenceUseXPathFilter2Transform | Specifies whether XPath Filter 2. |
ReferenceUseXPathTransform | Specifies whether XPath transform is included in transform chain. |
ReferenceXPathExpression | Use this property to specify XPath expression for XPath transform of the reference. |
ReferenceXPathFilter2Expressions | Use this property to specify XPointer expression(s) for XPath Filter 2. |
ReferenceXPathFilter2Filters | Use this property to specify XPointer filter(s) for XPath Filter 2. |
ReferenceXPathFilter2PrefixList | Use this property to specify a prefix list for XPath Filter 2. |
ReferenceXPathPrefixList | Use this property to specify a prefix list for XPath transform of the reference. |
SignatureBytes | TBD. |
SignatureValidationResult | Contains the signature validation result. |
SigningCertBytes | Returns raw certificate data in DER format. |
SigningCertCA | Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension). |
SigningCertCAKeyID | A unique identifier (fingerprint) of the CA certificate's private key. |
SigningCertCRLDistributionPoints | Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity. |
SigningCertCurve | Specifies the elliptic curve of the EC public key. |
SigningCertFingerprint | Contains the fingerprint (a hash imprint) of this certificate. |
SigningCertFriendlyName | Contains an associated alias (friendly name) of the certificate. |
SigningCertHandle | Allows to get or set a 'handle', a unique identifier of the underlying property object. |
SigningCertHashAlgorithm | Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN . |
SigningCertIssuer | The common name of the certificate issuer (CA), typically a company name. |
SigningCertIssuerRDN | A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer. |
SigningCertKeyAlgorithm | Specifies the public key algorithm of this certificate. |
SigningCertKeyBits | Returns the length of the public key. |
SigningCertKeyFingerprint | Returns a fingerprint of the public key contained in the certificate. |
SigningCertKeyUsage | Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set. |
SigningCertKeyValid | Returns True if the certificate's key is cryptographically valid, and False otherwise. |
SigningCertOCSPLocations | Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA. |
SigningCertPolicyIDs | Contains identifiers (OIDs) of the applicable certificate policies. |
SigningCertPublicKeyBytes | Contains the certificate's public key in DER format. |
SigningCertSelfSigned | Indicates whether the certificate is self-signed (root) or signed by an external CA. |
SigningCertSerialNumber | Returns the certificate's serial number. |
SigningCertSigAlgorithm | Indicates the algorithm that was used by the CA to sign this certificate. |
SigningCertSubject | The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. |
SigningCertSubjectKeyID | Contains a unique identifier (fingerprint) of the certificate's private key. |
SigningCertSubjectRDN | A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject). |
SigningCertValidFrom | The time point at which the certificate becomes valid, in UTC. |
SigningCertValidTo | The time point at which the certificate expires, in UTC. |
XMLElement | Specifies the XML element containing the signature. |
NamespaceCount | The number of records in the Namespace arrays. |
NamespacePrefix | A user-defined prefix value of a namespace. |
NamespaceURI | A user-defined URI value of a namespace. |
Method List
The following is the full list of the methods of the class with short descriptions. Click on the links for further details.
Config | Sets or retrieves a configuration setting. |
DoAction | Performs an additional action. |
Verify | Verifies a signed XML document. |
VerifyDetached | Verifies a detached signature over external XML data. |
Event List
The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.
Error | Information about errors during signature verification. |
Notification | This event notifies the application about an underlying control flow event. |
ReferenceValidated | Marks the end of a reference validation. |
ResolveReference | Asks the application to resolve a reference. |
SignatureFound | Signifies the start of signature validation. |
SignatureValidated | Reports the signature validation result. |
Configuration Settings
The following is a list of configuration settings for the class with short descriptions. Click on the links for further details.
DataType | Specifies the external data type. |
DetachedResourceURI | Specifies a detached resource URI. |
HMACKey | The key value for HMAC. |
HMACSigningUsed | Whether HMAC signing was used. |
IDAttributeName | Specifies the custom name of ID attribute. |
IDAttributeNamespaceURI | Specifies the custom namespace URI of ID attribute. |
InclusiveNamespacesPrefixList | Specifies the InclusiveNamespaces PrefixList. |
KeyName | Identifies the key. |
ManifestCount | The number of the manifest elements. |
ManifestID[Index] | The ID of the manifest element. |
ManifestObjectIndex[Index] | The object element index to which the manifest element belongs. |
ManifestXML[Index] | The XML content of the manifest element. |
ObjectCount | The number of the object elements. |
ObjectEncoding[Index] | The Encoding of the object element. |
ObjectID[Index] | The ID of the object element. |
ObjectMimeType[Index] | The MIME type of the object element. |
ObjectXML[Index] | The XML content of the object element. |
PSSUsed | Whether RSASSA-PSS mode was used. |
SignatureCompliance | SIgnature compliance with XMLDSig/EBICS. |
SignatureID | Contains the ID for Signature element. |
SignaturePropertiesCount | The number of the signature properties elements. |
SignaturePropertiesID[Index] | The ID of the signature properties element. |
SignaturePropertiesObjectIndex[Index] | The object element index to which the signature properties element belongs. |
SignaturePropertiesXML[Index] | The XML content of the signature properties element. |
SignaturePropertyCount | The number of the signature property elements. |
SignaturePropertyID[Index] | The ID of the signature properties element. |
SignaturePropertyPropertiesIndex[Index] | The signature properties element index to which the signature property element belongs. |
SignaturePropertyTarget[Index] | The Target of the signature properties element. |
SignaturePropertyXML[Index] | The XML content of the signature property element. |
TempPath | Location where the temporary files are stored. |
CheckKeyIntegrityBeforeUse | Enables or disable private key integrity check before use. |
CookieCaching | Specifies whether a cookie cache should be used for HTTP(S) transports. |
Cookies | Gets or sets local cookies for the class (supported for HTTPClient, RESTClient and SOAPClient only). |
DefDeriveKeyIterations | Specifies the default key derivation algorithm iteration count. |
EnableClientSideSSLFFDHE | Enables or disables finite field DHE key exchange support in TLS clients. |
GlobalCookies | Gets or sets global cookies for all the HTTP transports. |
HttpUserAgent | Specifies the user agent name to be used by all HTTP clients. |
LogDestination | Specifies the debug log destination. |
LogDetails | Specifies the debug log details to dump. |
LogFile | Specifies the debug log filename. |
LogFilters | Specifies the debug log filters. |
LogFlushMode | Specifies the log flush mode. |
LogLevel | Specifies the debug log level. |
LogMaxEventCount | Specifies the maximum number of events to cache before further action is taken. |
LogRotationMode | Specifies the log rotation mode. |
MaxASN1BufferLength | Specifies the maximal allowed length for ASN.1 primitive tag data. |
MaxASN1TreeDepth | Specifies the maximal depth for processed ASN.1 trees. |
OCSPHashAlgorithm | Specifies the hash algorithm to be used to identify certificates in OCSP requests. |
Tag | Allows to store any custom data. |
UseSharedSystemStorages | Specifies whether the validation engine should use a global per-process copy of the system certificate stores. |
UseSystemOAEPAndPSS | Enforces or disables the use of system-driven RSA OAEP and PSS computations. |
UseSystemRandom | Enables or disables the use of the OS PRNG. |
AllSignaturesValid Property (XMLVerifier Class)
The cumulative validity of all signatures.
Syntax
bool GetAllSignaturesValid();
Default Value
false
Remarks
Use this property to check if all the signatures found in the message or document are valid.
This property is read-only and not available at design time.
Data Type
Boolean
CanonicalizationMethod Property (XMLVerifier Class)
The XML canonicalization method that was used for signing.
Syntax
int GetCanonicalizationMethod();
Possible Values
CXCM_NONE(0),
CXCM_CANON(1),
CXCM_CANON_COMMENT(2),
CXCM_EXCL_CANON(3),
CXCM_EXCL_CANON_COMMENT(4),
CXCM_MIN_CANON(5),
CXCM_CANON_V_1_1(6),
CXCM_CANON_COMMENT_V_1_1(7)
Default Value
0
Remarks
Use this property to get the XML canonicalization method used for SignedInfo element. See XML-Signature Syntax and Processing specification for details.
Supported canonicalization methods:
cxcmNone | 0 | |
cxcmCanon | 1 | |
cxcmCanonComment | 2 | |
cxcmExclCanon | 3 | |
cxcmExclCanonComment | 4 | |
cxcmMinCanon | 5 | |
cxcmCanon_v1_1 | 6 | |
cxcmCanonComment_v1_1 | 7 |
This property is read-only and not available at design time.
Data Type
Integer
DataFile Property (XMLVerifier Class)
A file containing the external data covered by a detached signature.
Syntax
QString GetDataFile();
int SetDataFile(QString qsDataFile);
Default Value
""
Remarks
In the case of a detached signature, use this property to provide the external data to the class from a file. Alternatively, provide the data via DataStream.
Data Type
String
Encoding Property (XMLVerifier Class)
Specifies XML encoding.
Syntax
QString GetEncoding();
int SetEncoding(QString qsEncoding);
Default Value
""
Remarks
Use this property to specify the encoding to apply to the XML documents.
Data Type
String
FIPSMode Property (XMLVerifier Class)
Reserved.
Syntax
bool GetFIPSMode();
int SetFIPSMode(bool bFIPSMode);
Default Value
false
Remarks
This property is reserved for future use.
Data Type
Boolean
HashAlgorithm Property (XMLVerifier Class)
The hash algorithm used for signing.
Syntax
QString GetHashAlgorithm();
Default Value
"Unknown"
Remarks
Use this property to check which hash algorithm was used.
Supported values:
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 |
This property is read-only and not available at design time.
Data Type
String
InputBytes Property (XMLVerifier Class)
Use this property to pass the input to class in the byte array form.
Syntax
QByteArray GetInputBytes();
int SetInputBytes(QByteArray qbaInputBytes);
Remarks
Assign a byte array containing the data to be processed to this property.
This property is not available at design time.
Data Type
Byte Array
InputFile Property (XMLVerifier Class)
A signed XML file.
Syntax
QString GetInputFile();
int SetInputFile(QString qsInputFile);
Default Value
""
Remarks
Provide a path to the signed XML document in this property.
Data Type
String
KnownCertCount Property (XMLVerifier Class)
The number of records in the KnownCert arrays.
Syntax
int GetKnownCertCount();
int SetKnownCertCount(int iKnownCertCount);
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at KnownCertCount - 1.This property is not available at design time.
Data Type
Integer
KnownCertBytes Property (XMLVerifier Class)
Returns raw certificate data in DER format.
Syntax
QByteArray GetKnownCertBytes(int iKnownCertIndex);
Remarks
Returns raw certificate data in DER format.
The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
KnownCertHandle Property (XMLVerifier Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetKnownCertHandle(int iKnownCertIndex);
int SetKnownCertHandle(int iKnownCertIndex, qint64 lKnownCertHandle);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.
This property is not available at design time.
Data Type
Long64
ReferenceCount Property (XMLVerifier Class)
The number of records in the Reference arrays.
Syntax
int GetReferenceCount();
Default Value
0
Remarks
This property controls the size of the following arrays:
- ReferenceAutoGenerateElementId
- ReferenceCanonicalizationMethod
- ReferenceCustomElementId
- ReferenceDigestValue
- ReferenceHandle
- ReferenceHashAlgorithm
- ReferenceHasURI
- ReferenceID
- ReferenceInclusiveNamespacesPrefixList
- ReferenceReferenceType
- ReferenceTargetData
- ReferenceTargetXMLElement
- ReferenceURI
- ReferenceUseBase64Transform
- ReferenceUseEnvelopedSignatureTransform
- ReferenceUseXPathFilter2Transform
- ReferenceUseXPathTransform
- ReferenceXPathExpression
- ReferenceXPathFilter2Expressions
- ReferenceXPathFilter2Filters
- ReferenceXPathFilter2PrefixList
- ReferenceXPathPrefixList
This property is read-only and not available at design time.
Data Type
Integer
ReferenceAutoGenerateElementId Property (XMLVerifier Class)
Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing.
Syntax
bool GetReferenceAutoGenerateElementId(int iReferenceIndex);
Default Value
false
Remarks
Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing. Used when the referenced element doesn't have an ID and CustomElementId and URI properties are empty.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
Boolean
ReferenceCanonicalizationMethod Property (XMLVerifier Class)
Use this property to specify the canonicalization method for the transform of the reference.
Syntax
int GetReferenceCanonicalizationMethod(int iReferenceIndex);
Possible Values
CXCM_NONE(0),
CXCM_CANON(1),
CXCM_CANON_COMMENT(2),
CXCM_EXCL_CANON(3),
CXCM_EXCL_CANON_COMMENT(4),
CXCM_MIN_CANON(5),
CXCM_CANON_V_1_1(6),
CXCM_CANON_COMMENT_V_1_1(7)
Default Value
0
Remarks
Use this property to specify the canonicalization method for the transform of the reference. Use cxcmNone value to not to include canonicalization transform in transform chain. See XML-Signature Syntax and Processing specification for details.
cxcmNone | 0 | |
cxcmCanon | 1 | |
cxcmCanonComment | 2 | |
cxcmExclCanon | 3 | |
cxcmExclCanonComment | 4 | |
cxcmMinCanon | 5 | |
cxcmCanon_v1_1 | 6 | |
cxcmCanonComment_v1_1 | 7 |
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
Integer
ReferenceCustomElementId Property (XMLVerifier Class)
Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing.
Syntax
QString GetReferenceCustomElementId(int iReferenceIndex);
Default Value
""
Remarks
Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing. Used when the referenced element doesn't have an ID and URI property is empty.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
String
ReferenceDigestValue Property (XMLVerifier Class)
Use this property to get or set the value of the digest calculated over the referenced data.
Syntax
QByteArray GetReferenceDigestValue(int iReferenceIndex);
Remarks
Use this property to get or set the value of the digest calculated over the referenced data.
This property is optional and should be set only if you don't provide the actual data via TargetData or URI. If the data is set, then you don't need to set DigestValue since it will be calculated automatically.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
ReferenceHandle Property (XMLVerifier Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetReferenceHandle(int iReferenceIndex);
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
Long64
ReferenceHashAlgorithm Property (XMLVerifier Class)
Specifies the hash algorithm to be used.
Syntax
QString GetReferenceHashAlgorithm(int iReferenceIndex);
Default Value
"SHA256"
Remarks
Specifies the hash algorithm to be used.
Supported values:
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 |
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
String
ReferenceHasURI Property (XMLVerifier Class)
Specifies whether the URI is set (even when it is empty).
Syntax
bool GetReferenceHasURI(int iReferenceIndex);
Default Value
true
Remarks
Specifies whether the URI is set (even when it is empty).
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
Boolean
ReferenceID Property (XMLVerifier Class)
A user-defined identifier (ID) attribute of this Reference element.
Syntax
QString GetReferenceID(int iReferenceIndex);
Default Value
""
Remarks
A user-defined identifier (ID) attribute of this Reference element.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
String
ReferenceInclusiveNamespacesPrefixList Property (XMLVerifier Class)
Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference.
Syntax
QString GetReferenceInclusiveNamespacesPrefixList(int iReferenceIndex);
Default Value
""
Remarks
Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference. See XML-Signature Syntax and Processing specification for details.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
String
ReferenceReferenceType Property (XMLVerifier Class)
The Reference's type attribute as defined in XMLDSIG specification.
Syntax
QString GetReferenceReferenceType(int iReferenceIndex);
Default Value
""
Remarks
The Reference's type attribute as defined in XMLDSIG specification.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
String
ReferenceTargetData Property (XMLVerifier Class)
Contains the referenced external data when the digest value is not explicitly specified.
Syntax
QByteArray GetReferenceTargetData(int iReferenceIndex);
Remarks
Contains the referenced external data when the digest value is not explicitly specified.
This property is optional and should only be set if you reference the external data via URI, and you don't provide the digest value explicitly via DigestValue.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
Byte Array
ReferenceTargetXMLElement Property (XMLVerifier Class)
This property specifies the referenced XML element.
Syntax
QString GetReferenceTargetXMLElement(int iReferenceIndex);
Default Value
""
Remarks
This property specifies the referenced XML element. Used when the URI property is not set. In this case, the URI value is generated based on the ID of the referenced (target) XML element. If the URI property is set, this property is ignored until the ResolveReference event.
Supported values are:
"" | an empty string indicates the Document element. |
"#id" | indicates an XML element with specified Id. |
XPointer expression | indicates an XML element selected using XPointer expression. Use the XPathNamespaces property to specify Prefixes and NamespaceURIs
For example: "/root/data[1]" - indicates the second "data" element under the document element with a name "root" "//ns1:data" - indicates a data element. "ns1" prefix should be defined in XPathNamespaces property |
Node name | indicates an XML element selected using its NodeName.
For example: "data" - indicates an XML element with node name "data". |
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
String
ReferenceURI Property (XMLVerifier Class)
Use this property to get or set the URL which references the data.
Syntax
QString GetReferenceURI(int iReferenceIndex);
Default Value
""
Remarks
Use this property to get or set the URL which references the data. If the data is external, the application must set either TargetData or DigestValue. If TargetData is set, the digest is calculated automatically unless it is explicitly set by the application via DigestValue.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
String
ReferenceUseBase64Transform Property (XMLVerifier Class)
Specifies whether Base64 transform is included in transform chain.
Syntax
bool GetReferenceUseBase64Transform(int iReferenceIndex);
Default Value
false
Remarks
Specifies whether Base64 transform is included in transform chain.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
Boolean
ReferenceUseEnvelopedSignatureTransform Property (XMLVerifier Class)
Specifies whether enveloped signature transform is included in transform chain.
Syntax
bool GetReferenceUseEnvelopedSignatureTransform(int iReferenceIndex);
Default Value
false
Remarks
Specifies whether enveloped signature transform is included in transform chain.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
Boolean
ReferenceUseXPathFilter2Transform Property (XMLVerifier Class)
Specifies whether XPath Filter 2.
Syntax
bool GetReferenceUseXPathFilter2Transform(int iReferenceIndex);
Default Value
false
Remarks
Specifies whether XPath Filter 2.0 transform is included in transform chain.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
Boolean
ReferenceUseXPathTransform Property (XMLVerifier Class)
Specifies whether XPath transform is included in transform chain.
Syntax
bool GetReferenceUseXPathTransform(int iReferenceIndex);
Default Value
false
Remarks
Specifies whether XPath transform is included in transform chain.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
Boolean
ReferenceXPathExpression Property (XMLVerifier Class)
Use this property to specify XPath expression for XPath transform of the reference.
Syntax
QString GetReferenceXPathExpression(int iReferenceIndex);
Default Value
""
Remarks
Use this property to specify XPath expression for XPath transform of the reference.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
String
ReferenceXPathFilter2Expressions Property (XMLVerifier Class)
Use this property to specify XPointer expression(s) for XPath Filter 2.
Syntax
QString GetReferenceXPathFilter2Expressions(int iReferenceIndex);
Default Value
""
Remarks
Use this property to specify XPointer expression(s) for XPath Filter 2.0 transform of the reference.
TBD
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
String
ReferenceXPathFilter2Filters Property (XMLVerifier Class)
Use this property to specify XPointer filter(s) for XPath Filter 2.
Syntax
QString GetReferenceXPathFilter2Filters(int iReferenceIndex);
Default Value
""
Remarks
Use this property to specify XPointer filter(s) for XPath Filter 2.0 transform of the reference. The prefix list is comma-separated.
Supported values:
"intersect" | Intersect filter computes the intersection of the selected subtrees with the filter node-set. |
"subtract" | Subtract filter computes the subtraction of the selected subtrees with the filter node-set. |
"union" | Union filter computes the union of the selected subtrees with the filter node-set. |
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
String
ReferenceXPathFilter2PrefixList Property (XMLVerifier Class)
Use this property to specify a prefix list for XPath Filter 2.
Syntax
QString GetReferenceXPathFilter2PrefixList(int iReferenceIndex);
Default Value
""
Remarks
Use this property to specify a prefix list for XPath Filter 2.0 transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
String
ReferenceXPathPrefixList Property (XMLVerifier Class)
Use this property to specify a prefix list for XPath transform of the reference.
Syntax
QString GetReferenceXPathPrefixList(int iReferenceIndex);
Default Value
""
Remarks
Use this property to specify a prefix list for XPath transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.
The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.
This property is read-only and not available at design time.
Data Type
String
SignatureBytes Property (XMLVerifier Class)
TBD.
Syntax
QByteArray GetSignatureBytes();
Remarks
TBD.
This property is read-only and not available at design time.
Data Type
Byte Array
SignatureValidationResult Property (XMLVerifier Class)
Contains the signature validation result.
Syntax
int GetSignatureValidationResult();
Possible Values
XSV_VALID(0),
XSV_UNKNOWN(1),
XSV_CORRUPTED(2),
XSV_SIGNER_NOT_FOUND(3),
XSV_FAILURE(4),
XSV_REFERENCE_CORRUPTED(5)
Default Value
0
Remarks
Use this property to check the result of the most recent XML signature validation.
xsvValid | 0 | |
xsvUnknown | 1 | |
xsvCorrupted | 2 | |
xsvSignerNotFound | 3 | |
xsvFailure | 4 | |
xsvReferenceCorrupted | 5 |
This property is read-only and not available at design time.
Data Type
Integer
SigningCertBytes Property (XMLVerifier Class)
Returns raw certificate data in DER format.
Syntax
QByteArray GetSigningCertBytes();
Remarks
Returns raw certificate data in DER format.
This property is read-only and not available at design time.
Data Type
Byte Array
SigningCertCA Property (XMLVerifier Class)
Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).
Syntax
bool GetSigningCertCA();
Default Value
false
Remarks
Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).
This property is read-only and not available at design time.
Data Type
Boolean
SigningCertCAKeyID Property (XMLVerifier Class)
A unique identifier (fingerprint) of the CA certificate's private key.
Syntax
QByteArray GetSigningCertCAKeyID();
Remarks
A unique identifier (fingerprint) of the CA certificate's private key.
Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.
This property is read-only and not available at design time.
Data Type
Byte Array
SigningCertCRLDistributionPoints Property (XMLVerifier Class)
Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.
Syntax
QString GetSigningCertCRLDistributionPoints();
Default Value
""
Remarks
Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.
This property is read-only and not available at design time.
Data Type
String
SigningCertCurve Property (XMLVerifier Class)
Specifies the elliptic curve of the EC public key.
Syntax
QString GetSigningCertCurve();
Default Value
""
Remarks
Specifies the elliptic curve of the EC public key.
SB_EC_SECP112R1 | SECP112R1 | |
SB_EC_SECP112R2 | SECP112R2 | |
SB_EC_SECP128R1 | SECP128R1 | |
SB_EC_SECP128R2 | SECP128R2 | |
SB_EC_SECP160K1 | SECP160K1 | |
SB_EC_SECP160R1 | SECP160R1 | |
SB_EC_SECP160R2 | SECP160R2 | |
SB_EC_SECP192K1 | SECP192K1 | |
SB_EC_SECP192R1 | SECP192R1 | |
SB_EC_SECP224K1 | SECP224K1 | |
SB_EC_SECP224R1 | SECP224R1 | |
SB_EC_SECP256K1 | SECP256K1 | |
SB_EC_SECP256R1 | SECP256R1 | |
SB_EC_SECP384R1 | SECP384R1 | |
SB_EC_SECP521R1 | SECP521R1 | |
SB_EC_SECT113R1 | SECT113R1 | |
SB_EC_SECT113R2 | SECT113R2 | |
SB_EC_SECT131R1 | SECT131R1 | |
SB_EC_SECT131R2 | SECT131R2 | |
SB_EC_SECT163K1 | SECT163K1 | |
SB_EC_SECT163R1 | SECT163R1 | |
SB_EC_SECT163R2 | SECT163R2 | |
SB_EC_SECT193R1 | SECT193R1 | |
SB_EC_SECT193R2 | SECT193R2 | |
SB_EC_SECT233K1 | SECT233K1 | |
SB_EC_SECT233R1 | SECT233R1 | |
SB_EC_SECT239K1 | SECT239K1 | |
SB_EC_SECT283K1 | SECT283K1 | |
SB_EC_SECT283R1 | SECT283R1 | |
SB_EC_SECT409K1 | SECT409K1 | |
SB_EC_SECT409R1 | SECT409R1 | |
SB_EC_SECT571K1 | SECT571K1 | |
SB_EC_SECT571R1 | SECT571R1 | |
SB_EC_PRIME192V1 | PRIME192V1 | |
SB_EC_PRIME192V2 | PRIME192V2 | |
SB_EC_PRIME192V3 | PRIME192V3 | |
SB_EC_PRIME239V1 | PRIME239V1 | |
SB_EC_PRIME239V2 | PRIME239V2 | |
SB_EC_PRIME239V3 | PRIME239V3 | |
SB_EC_PRIME256V1 | PRIME256V1 | |
SB_EC_C2PNB163V1 | C2PNB163V1 | |
SB_EC_C2PNB163V2 | C2PNB163V2 | |
SB_EC_C2PNB163V3 | C2PNB163V3 | |
SB_EC_C2PNB176W1 | C2PNB176W1 | |
SB_EC_C2TNB191V1 | C2TNB191V1 | |
SB_EC_C2TNB191V2 | C2TNB191V2 | |
SB_EC_C2TNB191V3 | C2TNB191V3 | |
SB_EC_C2ONB191V4 | C2ONB191V4 | |
SB_EC_C2ONB191V5 | C2ONB191V5 | |
SB_EC_C2PNB208W1 | C2PNB208W1 | |
SB_EC_C2TNB239V1 | C2TNB239V1 | |
SB_EC_C2TNB239V2 | C2TNB239V2 | |
SB_EC_C2TNB239V3 | C2TNB239V3 | |
SB_EC_C2ONB239V4 | C2ONB239V4 | |
SB_EC_C2ONB239V5 | C2ONB239V5 | |
SB_EC_C2PNB272W1 | C2PNB272W1 | |
SB_EC_C2PNB304W1 | C2PNB304W1 | |
SB_EC_C2TNB359V1 | C2TNB359V1 | |
SB_EC_C2PNB368W1 | C2PNB368W1 | |
SB_EC_C2TNB431R1 | C2TNB431R1 | |
SB_EC_NISTP192 | NISTP192 | |
SB_EC_NISTP224 | NISTP224 | |
SB_EC_NISTP256 | NISTP256 | |
SB_EC_NISTP384 | NISTP384 | |
SB_EC_NISTP521 | NISTP521 | |
SB_EC_NISTB163 | NISTB163 | |
SB_EC_NISTB233 | NISTB233 | |
SB_EC_NISTB283 | NISTB283 | |
SB_EC_NISTB409 | NISTB409 | |
SB_EC_NISTB571 | NISTB571 | |
SB_EC_NISTK163 | NISTK163 | |
SB_EC_NISTK233 | NISTK233 | |
SB_EC_NISTK283 | NISTK283 | |
SB_EC_NISTK409 | NISTK409 | |
SB_EC_NISTK571 | NISTK571 | |
SB_EC_GOSTCPTEST | GOSTCPTEST | |
SB_EC_GOSTCPA | GOSTCPA | |
SB_EC_GOSTCPB | GOSTCPB | |
SB_EC_GOSTCPC | GOSTCPC | |
SB_EC_GOSTCPXCHA | GOSTCPXCHA | |
SB_EC_GOSTCPXCHB | GOSTCPXCHB | |
SB_EC_BRAINPOOLP160R1 | BRAINPOOLP160R1 | |
SB_EC_BRAINPOOLP160T1 | BRAINPOOLP160T1 | |
SB_EC_BRAINPOOLP192R1 | BRAINPOOLP192R1 | |
SB_EC_BRAINPOOLP192T1 | BRAINPOOLP192T1 | |
SB_EC_BRAINPOOLP224R1 | BRAINPOOLP224R1 | |
SB_EC_BRAINPOOLP224T1 | BRAINPOOLP224T1 | |
SB_EC_BRAINPOOLP256R1 | BRAINPOOLP256R1 | |
SB_EC_BRAINPOOLP256T1 | BRAINPOOLP256T1 | |
SB_EC_BRAINPOOLP320R1 | BRAINPOOLP320R1 | |
SB_EC_BRAINPOOLP320T1 | BRAINPOOLP320T1 | |
SB_EC_BRAINPOOLP384R1 | BRAINPOOLP384R1 | |
SB_EC_BRAINPOOLP384T1 | BRAINPOOLP384T1 | |
SB_EC_BRAINPOOLP512R1 | BRAINPOOLP512R1 | |
SB_EC_BRAINPOOLP512T1 | BRAINPOOLP512T1 | |
SB_EC_CURVE25519 | CURVE25519 | |
SB_EC_CURVE448 | CURVE448 |
This property is read-only and not available at design time.
Data Type
String
SigningCertFingerprint Property (XMLVerifier Class)
Contains the fingerprint (a hash imprint) of this certificate.
Syntax
QByteArray GetSigningCertFingerprint();
Remarks
Contains the fingerprint (a hash imprint) of this certificate.
This property is read-only and not available at design time.
Data Type
Byte Array
SigningCertFriendlyName Property (XMLVerifier Class)
Contains an associated alias (friendly name) of the certificate.
Syntax
QString GetSigningCertFriendlyName();
Default Value
""
Remarks
Contains an associated alias (friendly name) of the certificate.
This property is read-only and not available at design time.
Data Type
String
SigningCertHandle Property (XMLVerifier Class)
Allows to get or set a 'handle', a unique identifier of the underlying property object.
Syntax
qint64 GetSigningCertHandle();
Default Value
0
Remarks
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
This property is read-only and not available at design time.
Data Type
Long64
SigningCertHashAlgorithm Property (XMLVerifier Class)
Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .
Syntax
QString GetSigningCertHashAlgorithm();
Default Value
""
Remarks
Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_MD2 | MD2 | |
SB_HASH_ALGORITHM_MD4 | MD4 | |
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_CRC32 | CRC32 | |
SB_HASH_ALGORITHM_SSL3 | SSL3 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_POLY1305 | POLY1305 | |
SB_HASH_ALGORITHM_SHA3_224 | SHA3_224 | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | |
SB_HASH_ALGORITHM_BLAKE2S_128 | BLAKE2S_128 | |
SB_HASH_ALGORITHM_BLAKE2S_160 | BLAKE2S_160 | |
SB_HASH_ALGORITHM_BLAKE2S_224 | BLAKE2S_224 | |
SB_HASH_ALGORITHM_BLAKE2S_256 | BLAKE2S_256 | |
SB_HASH_ALGORITHM_BLAKE2B_160 | BLAKE2B_160 | |
SB_HASH_ALGORITHM_BLAKE2B_256 | BLAKE2B_256 | |
SB_HASH_ALGORITHM_BLAKE2B_384 | BLAKE2B_384 | |
SB_HASH_ALGORITHM_BLAKE2B_512 | BLAKE2B_512 | |
SB_HASH_ALGORITHM_SHAKE_128 | SHAKE_128 | |
SB_HASH_ALGORITHM_SHAKE_256 | SHAKE_256 | |
SB_HASH_ALGORITHM_SHAKE_128_LEN | SHAKE_128_LEN | |
SB_HASH_ALGORITHM_SHAKE_256_LEN | SHAKE_256_LEN |
This property is read-only and not available at design time.
Data Type
String
SigningCertIssuer Property (XMLVerifier Class)
The common name of the certificate issuer (CA), typically a company name.
Syntax
QString GetSigningCertIssuer();
Default Value
""
Remarks
The common name of the certificate issuer (CA), typically a company name.
This property is read-only and not available at design time.
Data Type
String
SigningCertIssuerRDN Property (XMLVerifier Class)
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
Syntax
QString GetSigningCertIssuerRDN();
Default Value
""
Remarks
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
This property is read-only and not available at design time.
Data Type
String
SigningCertKeyAlgorithm Property (XMLVerifier Class)
Specifies the public key algorithm of this certificate.
Syntax
QString GetSigningCertKeyAlgorithm();
Default Value
"0"
Remarks
Specifies the public key algorithm of this certificate.
SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION | rsaEncryption | |
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION | md2withRSAEncryption | |
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION | md5withRSAEncryption | |
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION | sha1withRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA | id-dsa | |
SB_CERT_ALGORITHM_ID_DSA_SHA1 | id-dsa-with-sha1 | |
SB_CERT_ALGORITHM_DH_PUBLIC | dhpublicnumber | |
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION | sha224WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION | sha256WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION | sha384WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION | sha512WithRSAEncryption | |
SB_CERT_ALGORITHM_ID_RSAPSS | id-RSASSA-PSS | |
SB_CERT_ALGORITHM_ID_RSAOAEP | id-RSAES-OAEP | |
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160 | ripemd160withRSA | |
SB_CERT_ALGORITHM_ID_ELGAMAL | elGamal | |
SB_CERT_ALGORITHM_SHA1_ECDSA | ecdsa-with-SHA1 | |
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA | ecdsa-recommended | |
SB_CERT_ALGORITHM_SHA224_ECDSA | ecdsa-with-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA | ecdsa-with-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA | ecdsa-with-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA | ecdsa-with-SHA512 | |
SB_CERT_ALGORITHM_EC | id-ecPublicKey | |
SB_CERT_ALGORITHM_SPECIFIED_ECDSA | ecdsa-specified | |
SB_CERT_ALGORITHM_GOST_R3410_1994 | id-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3410_2001 | id-GostR3410-2001 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994 | id-GostR3411-94-with-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001 | id-GostR3411-94-with-GostR3410-2001 | |
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN | ecdsa-plain-SHA1 | |
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN | ecdsa-plain-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN | ecdsa-plain-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN | ecdsa-plain-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN | ecdsa-plain-SHA512 | |
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN | ecdsa-plain-RIPEMD160 | |
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION | whirlpoolWithRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA_SHA224 | id-dsa-with-sha224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA256 | id-dsa-with-sha256 | |
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA | id-ecdsa-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA | id-ecdsa-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA | id-ecdsa-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA | id-ecdsa-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-512 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_224 | id-dsa-with-sha3-224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_256 | id-dsa-with-sha3-256 | |
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA | id-ecdsa-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA | id-ecdsa-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA | id-ecdsa-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA | id-ecdsa-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA | id-ecdsa-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA | id-ecdsa-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA | id-ecdsa-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA | id-ecdsa-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b512 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224 | id-dsa-with-blake2s224 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256 | id-dsa-with-blake2s256 | |
SB_CERT_ALGORITHM_EDDSA_ED25519 | id-Ed25519 | |
SB_CERT_ALGORITHM_EDDSA_ED448 | id-Ed448 | |
SB_CERT_ALGORITHM_EDDSA_ED25519_PH | id-Ed25519ph | |
SB_CERT_ALGORITHM_EDDSA_ED448_PH | id-Ed448ph | |
SB_CERT_ALGORITHM_EDDSA | id-EdDSA | |
SB_CERT_ALGORITHM_EDDSA_SIGNATURE | id-EdDSA-sig |
This property is read-only and not available at design time.
Data Type
String
SigningCertKeyBits Property (XMLVerifier Class)
Returns the length of the public key.
Syntax
int GetSigningCertKeyBits();
Default Value
0
Remarks
Returns the length of the public key.
This property is read-only and not available at design time.
Data Type
Integer
SigningCertKeyFingerprint Property (XMLVerifier Class)
Returns a fingerprint of the public key contained in the certificate.
Syntax
QByteArray GetSigningCertKeyFingerprint();
Remarks
Returns a fingerprint of the public key contained in the certificate.
This property is read-only and not available at design time.
Data Type
Byte Array
SigningCertKeyUsage Property (XMLVerifier Class)
Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
Syntax
int GetSigningCertKeyUsage();
Default Value
0
Remarks
Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
This value is a bit mask of the following values:
ckuUnknown | 0x00000 | Unknown key usage |
ckuDigitalSignature | 0x00001 | Digital signature |
ckuNonRepudiation | 0x00002 | Non-repudiation |
ckuKeyEncipherment | 0x00004 | Key encipherment |
ckuDataEncipherment | 0x00008 | Data encipherment |
ckuKeyAgreement | 0x00010 | Key agreement |
ckuKeyCertSign | 0x00020 | Certificate signing |
ckuCRLSign | 0x00040 | Revocation signing |
ckuEncipherOnly | 0x00080 | Encipher only |
ckuDecipherOnly | 0x00100 | Decipher only |
ckuServerAuthentication | 0x00200 | Server authentication |
ckuClientAuthentication | 0x00400 | Client authentication |
ckuCodeSigning | 0x00800 | Code signing |
ckuEmailProtection | 0x01000 | Email protection |
ckuTimeStamping | 0x02000 | Timestamping |
ckuOCSPSigning | 0x04000 | OCSP signing |
ckuSmartCardLogon | 0x08000 | Smartcard logon |
ckuKeyPurposeClientAuth | 0x10000 | Kerberos - client authentication |
ckuKeyPurposeKDC | 0x20000 | Kerberos - KDC |
This property is read-only and not available at design time.
Data Type
Integer
SigningCertKeyValid Property (XMLVerifier Class)
Returns True if the certificate's key is cryptographically valid, and False otherwise.
Syntax
bool GetSigningCertKeyValid();
Default Value
false
Remarks
Returns True if the certificate's key is cryptographically valid, and False otherwise.
This property is read-only and not available at design time.
Data Type
Boolean
SigningCertOCSPLocations Property (XMLVerifier Class)
Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.
Syntax
QString GetSigningCertOCSPLocations();
Default Value
""
Remarks
Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.
This property is read-only and not available at design time.
Data Type
String
SigningCertPolicyIDs Property (XMLVerifier Class)
Contains identifiers (OIDs) of the applicable certificate policies.
Syntax
QString GetSigningCertPolicyIDs();
Default Value
""
Remarks
Contains identifiers (OIDs) of the applicable certificate policies.
The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.
This property is read-only and not available at design time.
Data Type
String
SigningCertPublicKeyBytes Property (XMLVerifier Class)
Contains the certificate's public key in DER format.
Syntax
QByteArray GetSigningCertPublicKeyBytes();
Remarks
Contains the certificate's public key in DER format.
This property is read-only and not available at design time.
Data Type
Byte Array
SigningCertSelfSigned Property (XMLVerifier Class)
Indicates whether the certificate is self-signed (root) or signed by an external CA.
Syntax
bool GetSigningCertSelfSigned();
Default Value
false
Remarks
Indicates whether the certificate is self-signed (root) or signed by an external CA.
This property is read-only and not available at design time.
Data Type
Boolean
SigningCertSerialNumber Property (XMLVerifier Class)
Returns the certificate's serial number.
Syntax
QByteArray GetSigningCertSerialNumber();
Remarks
Returns the certificate's serial number.
This property is read-only and not available at design time.
Data Type
Byte Array
SigningCertSigAlgorithm Property (XMLVerifier Class)
Indicates the algorithm that was used by the CA to sign this certificate.
Syntax
QString GetSigningCertSigAlgorithm();
Default Value
""
Remarks
Indicates the algorithm that was used by the CA to sign this certificate.
This property is read-only and not available at design time.
Data Type
String
SigningCertSubject Property (XMLVerifier Class)
The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
Syntax
QString GetSigningCertSubject();
Default Value
""
Remarks
The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
This property is read-only and not available at design time.
Data Type
String
SigningCertSubjectKeyID Property (XMLVerifier Class)
Contains a unique identifier (fingerprint) of the certificate's private key.
Syntax
QByteArray GetSigningCertSubjectKeyID();
Remarks
Contains a unique identifier (fingerprint) of the certificate's private key.
Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.
This property is read-only and not available at design time.
Data Type
Byte Array
SigningCertSubjectRDN Property (XMLVerifier Class)
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
Syntax
QString GetSigningCertSubjectRDN();
Default Value
""
Remarks
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
This property is read-only and not available at design time.
Data Type
String
SigningCertValidFrom Property (XMLVerifier Class)
The time point at which the certificate becomes valid, in UTC.
Syntax
QString GetSigningCertValidFrom();
Default Value
""
Remarks
The time point at which the certificate becomes valid, in UTC.
This property is read-only and not available at design time.
Data Type
String
SigningCertValidTo Property (XMLVerifier Class)
The time point at which the certificate expires, in UTC.
Syntax
QString GetSigningCertValidTo();
Default Value
""
Remarks
The time point at which the certificate expires, in UTC.
This property is read-only and not available at design time.
Data Type
String
XMLElement Property (XMLVerifier Class)
Specifies the XML element containing the signature.
Syntax
QString GetXMLElement();
int SetXMLElement(QString qsXMLElement);
Default Value
""
Remarks
Specifies the XML element that contains the signature to be validated.
Supported values are:
"" | an empty string indicates that all signatures will be verified. |
"#id" | indicates an XML element with specified Id. |
XPointer expression | indicates an XML element selected using XPointer expression. Use XPathNamespaces property to specify Prefixes and NamespaceURIs
For example: "/root/data[1]" - indicates the second "data" element under the document element with a name "root" "//ns1:data" - indicates a data element. "ns1" prefix should be defined in XPathNamespaces property |
Node name | indicates an XML element selected using its NodeName.
For example: "data" - indicates an XML element with node name "data". |
Data Type
String
NamespaceCount Property (XMLVerifier Class)
The number of records in the Namespace arrays.
Syntax
int GetNamespaceCount();
int SetNamespaceCount(int iNamespaceCount);
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at NamespaceCount - 1.This property is not available at design time.
Data Type
Integer
NamespacePrefix Property (XMLVerifier Class)
A user-defined prefix value of a namespace.
Syntax
QString GetNamespacePrefix(int iNamespaceIndex);
int SetNamespacePrefix(int iNamespaceIndex, QString qsNamespacePrefix);
Default Value
""
Remarks
A user-defined prefix value of a namespace.
The NamespaceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the NamespaceCount property.
This property is not available at design time.
Data Type
String
NamespaceURI Property (XMLVerifier Class)
A user-defined URI value of a namespace.
Syntax
QString GetNamespaceURI(int iNamespaceIndex);
int SetNamespaceURI(int iNamespaceIndex, QString qsNamespaceURI);
Default Value
""
Remarks
A user-defined URI value of a namespace.
The NamespaceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the NamespaceCount property.
This property is not available at design time.
Data Type
String
Config Method (XMLVerifier Class)
Sets or retrieves a configuration setting.
Syntax
QString Config(const QString& qsConfigurationString);
Remarks
Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
Error Handling
This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.
DoAction Method (XMLVerifier Class)
Performs an additional action.
Syntax
QString DoAction(const QString& qsActionID, const QString& qsActionParams);
Remarks
DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.
The unique identifier of the action is provided in ActionID parameter. ActionParams contains a list of parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....
Error Handling
This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.
Verify Method (XMLVerifier Class)
Verifies a signed XML document.
Syntax
int Verify();
Remarks
Call this method to verify the signature embedded in the document. Pass the document via InputStream or InputFile property. Use VerifyDetached to verify the external data in case of a detached signature.
Error Handling
This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)
VerifyDetached Method (XMLVerifier Class)
Verifies a detached signature over external XML data.
Syntax
int VerifyDetached();
Remarks
Call this method to verify a signature over external (detached) data provided via DataStream or DataFile.
Error Handling
This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)
Error Event (XMLVerifier Class)
Information about errors during signature verification.
Syntax
class XMLVerifierErrorEventParams { public: int ErrorCode(); const QString &Description(); int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void Error(XMLVerifierErrorEventParams *e);
// Or, subclass XMLVerifier and override this emitter function. virtual int FireError(XMLVerifierErrorEventParams *e) {...}
Remarks
The event is fired in case of exceptional conditions during verification.
ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to XML.
Notification Event (XMLVerifier Class)
This event notifies the application about an underlying control flow event.
Syntax
class XMLVerifierNotificationEventParams { public: const QString &EventID(); const QString &EventParam(); int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void Notification(XMLVerifierNotificationEventParams *e);
// Or, subclass XMLVerifier and override this emitter function. virtual int FireNotification(XMLVerifierNotificationEventParams *e) {...}
Remarks
The class fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.
The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.
ReferenceValidated Event (XMLVerifier Class)
Marks the end of a reference validation.
Syntax
class XMLVerifierReferenceValidatedEventParams { public: const QString &ID(); const QString &URI(); const QString &RefType(); int ReferenceIndex(); bool DigestValid(); int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void ReferenceValidated(XMLVerifierReferenceValidatedEventParams *e);
// Or, subclass XMLVerifier and override this emitter function. virtual int FireReferenceValidated(XMLVerifierReferenceValidatedEventParams *e) {...}
Remarks
The class fires this event to report completion of a reference validation. A reference is a building block of a signature as it binds signature coverage to a particular piece of the document.
ResolveReference Event (XMLVerifier Class)
Asks the application to resolve a reference.
Syntax
class XMLVerifierResolveReferenceEventParams { public: const QString &URI(); int ReferenceIndex(); int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void ResolveReference(XMLVerifierResolveReferenceEventParams *e);
// Or, subclass XMLVerifier and override this emitter function. virtual int FireResolveReference(XMLVerifierResolveReferenceEventParams *e) {...}
Remarks
This event is fired when the control could not automatically resolve a reference and requires custom treatment.
URI contains a reference to the data.
ReferenceIndex specifies the index of the reference to process.
Based on the reference's URI the event handler should set either TargetXMLElement or TargetData property of the reference.
SignatureFound Event (XMLVerifier Class)
Signifies the start of signature validation.
Syntax
class XMLVerifierSignatureFoundEventParams { public: const QString &IssuerRDN(); const QByteArray &SerialNumber(); const QByteArray &SubjectKeyID(); bool CertFound(); bool ValidateSignature(); void SetValidateSignature(bool bValidateSignature); bool ValidateChain(); void SetValidateChain(bool bValidateChain); int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void SignatureFound(XMLVerifierSignatureFoundEventParams *e);
// Or, subclass XMLVerifier and override this emitter function. virtual int FireSignatureFound(XMLVerifierSignatureFoundEventParams *e) {...}
Remarks
This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.
The CertFound is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via KnownCertificates property.
Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with SignatureValidationResult and ChainValidationResult properties respectively.
Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.
SignatureValidated Event (XMLVerifier Class)
Reports the signature validation result.
Syntax
class XMLVerifierSignatureValidatedEventParams { public: const QString &IssuerRDN(); const QByteArray &SerialNumber(); const QByteArray &SubjectKeyID(); int ValidationResult(); int EventRetVal(); void SetEventRetVal(int iRetVal); };
// To handle, connect one or more slots to this signal. void SignatureValidated(XMLVerifierSignatureValidatedEventParams *e);
// Or, subclass XMLVerifier and override this emitter function. virtual int FireSignatureValidated(XMLVerifierSignatureValidatedEventParams *e) {...}
Remarks
This event is fired when the complete XML signature validation process is finished. IssuerRDN returns the name of the signature issuer, SerialNumber identifies the signing certificate, SubjectKeyID contains the key identifier (SecureBlackbox uses SHA-1 hash algorithm output as key identifiers). Finally, ValidationResult specifies whether signature is valid or not:
xsvValid | 0 | |
xsvUnknown | 1 | |
xsvCorrupted | 2 | |
xsvSignerNotFound | 3 | |
xsvFailure | 4 | |
xsvReferenceCorrupted | 5 |
Configuration Settings (XMLVerifier Class)
The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.XMLVerifier Configuration Settings | ||||||||||||||||||||||||||||||
DataType:
Specifies the external data type.Use this property to specify the type of the external data (either DataFile, DataStream or DataBytes properties) for class.
The following data types are supported:
|
||||||||||||||||||||||||||||||
DetachedResourceURI: Specifies a detached resource URI.Specifies a URI of the provided data, usually the data filename if stored along with a detached signature. | ||||||||||||||||||||||||||||||
HMACKey:
The key value for HMAC.TBD
The component uses base16 (hex) encoding for this configuration value. |
||||||||||||||||||||||||||||||
HMACSigningUsed: Whether HMAC signing was used.TBD | ||||||||||||||||||||||||||||||
IDAttributeName: Specifies the custom name of ID attribute.This property contains the custom name of identifier (ID) attribute. Used to identify the target XML element when reference URI has "#id_name" value or when ID attribute should be auto-generated for a target XML element. | ||||||||||||||||||||||||||||||
IDAttributeNamespaceURI: Specifies the custom namespace URI of ID attribute.This property contains the custom namespace URI of identifier (ID) attribute. Used to identify the target XML element when reference URI has "#id_name" value or when ID attribute should be auto-generated for a target XML element. | ||||||||||||||||||||||||||||||
InclusiveNamespacesPrefixList: Specifies the InclusiveNamespaces PrefixList.Use this property to read InclusiveNamespaces PrefixList used for exclusive canonicalization transform of SignedInfo element. See XML-Signature Syntax and Processing specification for details. | ||||||||||||||||||||||||||||||
KeyName: Identifies the key.Contains a string value (with significant spaces) which may be used by the signer to communicate a key identifier to the recipient. Typically, KeyName contains an identifier related to the key pair used to sign the message, but it may contain other protocol-related information that indirectly identifies a key pair. Common uses of KeyName include simple string names for keys, a key index, a distinguished name (DN), an email address, etc. | ||||||||||||||||||||||||||||||
ManifestCount: The number of the manifest elements.Returns the number of the ds:Manifest elements available. | ||||||||||||||||||||||||||||||
ManifestID[Index]: The ID of the manifest element.This property contains the identifier (ID) attribute of the ds:Manifest element. Index value could be omitted for the first manifest. | ||||||||||||||||||||||||||||||
ManifestObjectIndex[Index]: The object element index to which the manifest element belongs.This property contains the ds:Object element index to which the ds:Manifest element belongs. Index value could be omitted for the first signature properties. | ||||||||||||||||||||||||||||||
ManifestXML[Index]: The XML content of the manifest element.This property contains the XML content of the ds:Manifest element. Index value could be omitted for the first manifest. | ||||||||||||||||||||||||||||||
ObjectCount: The number of the object elements.Returns the number of the additional ds:Object elements available. | ||||||||||||||||||||||||||||||
ObjectEncoding[Index]: The Encoding of the object element.This property contains the Encoding attribute of the ds:Object element. Index value could be omitted for the first object. | ||||||||||||||||||||||||||||||
ObjectID[Index]: The ID of the object element.This property contains the identifier (ID) attribute of the ds:Object element. Index value could be omitted for the first object. | ||||||||||||||||||||||||||||||
ObjectMimeType[Index]: The MIME type of the object element.This property contains the MIME type attribute of the ds:Object element. Index value could be omitted for the first object. | ||||||||||||||||||||||||||||||
ObjectXML[Index]: The XML content of the object element.This property contains the XML content of the ds:Object element. Index value could be omitted for the first object. | ||||||||||||||||||||||||||||||
PSSUsed: Whether RSASSA-PSS mode was used.Although the RSASSA-PSS algorithm provides better security than a classic RSA scheme (PKCS#1-1.5), please take into account that RSASSA-PSS is a relatively new algorithm which may not be understood by older implementations. | ||||||||||||||||||||||||||||||
SignatureCompliance:
SIgnature compliance with XMLDSig/EBICS.Specifies whether the signature is compliant with
W3C's XMLDSig, or with EBICS (Electronic Banking Internet Communication Standard).
Supported values are:
|
||||||||||||||||||||||||||||||
SignatureID: Contains the ID for Signature element.This property contains the identifier (ID) attribute of the ds:Signature element. | ||||||||||||||||||||||||||||||
SignaturePropertiesCount: The number of the signature properties elements.Returns the number of the ds:SignatureProperties elements available. | ||||||||||||||||||||||||||||||
SignaturePropertiesID[Index]: The ID of the signature properties element.This property contains the identifier (ID) attribute of the ds:SignatureProperties element. Index value could be omitted for the first signature properties. | ||||||||||||||||||||||||||||||
SignaturePropertiesObjectIndex[Index]: The object element index to which the signature properties element belongs.This property contains the ds:Object element index to which the ds:SignatureProperties element belongs. Index value could be omitted for the first signature properties. | ||||||||||||||||||||||||||||||
SignaturePropertiesXML[Index]: The XML content of the signature properties element.This property contains the XML content of the ds:SignatureProperties element. Index value could be omitted for the first signature properties. | ||||||||||||||||||||||||||||||
SignaturePropertyCount: The number of the signature property elements.Returns the number of the ds:SignatureProperty elements available. | ||||||||||||||||||||||||||||||
SignaturePropertyID[Index]: The ID of the signature properties element.This property contains the identifier (ID) attribute of the ds:SignatureProperty element. Index value could be omitted for the first signature property. | ||||||||||||||||||||||||||||||
SignaturePropertyPropertiesIndex[Index]: The signature properties element index to which the signature property element belongs.This property contains the ds:SignatureProperties element index to which the ds:SignatureProperty element belongs. Index value could be omitted for the first signature property. | ||||||||||||||||||||||||||||||
SignaturePropertyTarget[Index]: The Target of the signature properties element.This property contains the Target attribute of the ds:SignatureProperty element. Index value could be omitted for the first signature property. | ||||||||||||||||||||||||||||||
SignaturePropertyXML[Index]: The XML content of the signature property element.This property contains the XML content of the ds:SignatureProperty element. Index value could be omitted for the first signature property. | ||||||||||||||||||||||||||||||
TempPath: Location where the temporary files are stored.This setting specifies an absolute path to the location on disk where temporary files are stored. | ||||||||||||||||||||||||||||||
Base Configuration Settings | ||||||||||||||||||||||||||||||
CheckKeyIntegrityBeforeUse:
Enables or disable private key integrity check before use.This global property enables or disables private key material check before each signing operation. This slows down performance a bit,
but prevents a selection of attacks on RSA keys where keys with unknown origins are used.
You can switch this property off to improve performance if your project only uses known, good private keys. |
||||||||||||||||||||||||||||||
CookieCaching:
Specifies whether a cookie cache should be used for HTTP(S) transports.Set this property to enable or disable cookies caching for the class.
Supported values are:
|
||||||||||||||||||||||||||||||
Cookies: Gets or sets local cookies for the class (supported for HTTPClient, RESTClient and SOAPClient only).Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions. | ||||||||||||||||||||||||||||||
DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided. | ||||||||||||||||||||||||||||||
EnableClientSideSSLFFDHE:
Enables or disables finite field DHE key exchange support in TLS clients.This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower
algorithm if compared to EC DHE; enabling it may result in slower connections.
This setting only applies to sessions negotiated with TLS version 1.3. |
||||||||||||||||||||||||||||||
GlobalCookies: Gets or sets global cookies for all the HTTP transports.Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global". | ||||||||||||||||||||||||||||||
HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes. | ||||||||||||||||||||||||||||||
LogDestination:
Specifies the debug log destination.Contains a comma-separated list of values that specifies where debug log should be dumped.
Supported values are:
|
||||||||||||||||||||||||||||||
LogDetails:
Specifies the debug log details to dump.Contains a comma-separated list of values that specifies which debug log details to dump.
Supported values are:
|
||||||||||||||||||||||||||||||
LogFile: Specifies the debug log filename.Use this property to provide a path to the log file. | ||||||||||||||||||||||||||||||
LogFilters:
Specifies the debug log filters.Contains a comma-separated list of value pairs ("name:value") that describe filters.
Supported filter names are:
|
||||||||||||||||||||||||||||||
LogFlushMode:
Specifies the log flush mode.Use this property to set the log flush mode. The following values are defined:
|
||||||||||||||||||||||||||||||
LogLevel:
Specifies the debug log level.Use this property to provide the desired debug log level.
Supported values are:
|
||||||||||||||||||||||||||||||
LogMaxEventCount:
Specifies the maximum number of events to cache before further action is taken.Use this property to specify the log event number threshold. This threshold may have different effects,
depending on the rotation setting and/or the flush mode.
The default value of this setting is 100. |
||||||||||||||||||||||||||||||
LogRotationMode:
Specifies the log rotation mode.Use this property to set the log rotation mode. The following values are defined:
|
||||||||||||||||||||||||||||||
MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks. | ||||||||||||||||||||||||||||||
MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks. | ||||||||||||||||||||||||||||||
OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful. | ||||||||||||||||||||||||||||||
Tag: Allows to store any custom data.Use this config property to store any custom data. | ||||||||||||||||||||||||||||||
UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.Set this global property to false to make each validation run use its own copy of system certificate stores. | ||||||||||||||||||||||||||||||
UseSystemOAEPAndPSS:
Enforces or disables the use of system-driven RSA OAEP and PSS computations.This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable.
If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations
using its own OAEP/PSS implementation.
This setting only applies to certificates originating from a Windows system store. |
||||||||||||||||||||||||||||||
UseSystemRandom: Enables or disables the use of the OS PRNG.Use this global property to enable or disable the use of operating system-driven pseudorandom number generation. |
Trappable Errors (XMLVerifier Class)
XMLVerifier Errors
1048577 Invalid parameter value (SB_ERROR_INVALID_PARAMETER) | |
1048578 Class is configured incorrectly (SB_ERROR_INVALID_SETUP) | |
1048579 Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE) | |
1048580 Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE) | |
1048581 Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY) | |
1048581 Cancelled by the user (SB_ERROR_CANCELLED_BY_USER) | |
39845889 Input file does not exist (SB_ERROR_XML_INPUTFILE_NOT_EXISTS) | |
39845890 Data file does not exist (SB_ERROR_XML_DATAFILE_NOT_EXISTS) | |
39845891 Unsupported signature method type (SB_ERROR_XML_UNSUPPORTED_SIGNATURE_METHOD_TYPE) | |
39845892 Unsupported has algorithm (SB_ERROR_XML_UNSUPPORTED_HASH_ALGORITHM) | |
39845893 Unsupported key type (SB_ERROR_XML_UNSUPPORTED_KEY_TYPE) | |
39845894 Invalid key type (SB_ERROR_XML_INVALID_KEY_TYPE) | |
39845895 Invalid encryption method (SB_ERROR_XML_INVALID_ENCRYPTION_METHOD) | |
39845896 Not found (SB_ERROR_XML_NOT_FOUND) | |
39845897 No element ID (SB_ERROR_XML_NO_ELEMENT_ID) |