Struct secureblackbox::ASiCVerifier

Properties Methods Events Config Settings Errors

The ASiCVerifier struct verifies associated signature containers.

Syntax

secureblackbox::ASiCVerifier

Remarks

ASiCVerifier provides the functionality of verifying signatures that are part of Associated Signature Containers. ASiC containers are ZIP-compatible files that bind together signed documents, and electronic signatures or timestamps made over them.

ASiC containers are widely used across Europe and many other countries, due to their high interoperability and seamless integration into existing CAdES and XAdES environments.

ASiCVerifier provides a simple and powerful mechanism to verify ASiC signatures in accordance with the respective ETSI standards (ETSI EN 319 162). It supports the following features of the standard (which cover the most of it):

ASiC-S (simple) and ASiC-E (extended) signature profiles.
CAdES- and XAdES-based signatures, as well as standalone RFC 3161 timestamps.
Matching the signature to all the current and older ETSI signature profiles (including B-B, B-T, B-LT, B-LTA).
Complete chain of trust validation process, using local, global, nation-specific (EUTL), or custom trust.
Removal of existing signatures.
Online and offline modes.

The component is being actively maintained and updated, following ongoing developments in AdES world. For more than 10 years, our engineers have been active participants of ETSI Plugtests events, to make sure that our e-Signature infrastructure is compliant and highly interoperable.

Just like our other signature components, ASiCVerifier supports several work modes that differ in complexity, allowing for both 'quick' and 'flexible' use. The simple mode assumes providing the input_file and the output_file, and calling the one-pass verify method. This approach is straightforward and would let you get ASiC verification on board quickly.

More complex tune-up may involve fine-grained adjustment of validation properties, such as providing your own validation material (certificates, OCSPs, CRLs) or fine-tuning conflict/error resolution options. You can also choose to work with the container step-by-step, by splitting the one-pass operation into a sequence of individual open, validate/revalidate, and close calls. ASiCVerifier verifier = new ASiCVerifier(); verifier.setInputFile("./SignedFile.scs"); // the path of the signed file verifier.setExtractionMode(ASiCVerifier.aemAll); // set the extraction method verifier.setOutputPath("./MyFiles"); // the path where the extracted files will be saved verifier.verify();

Object Lifetime

The new() method returns a mutable reference to a struct instance. The object itself is kept in the global list maintained by SecureBlackbox. Due to this, the ASiCVerifier struct cannot be disposed of automatically. Please, call the dispose(&mut self) method of ASiCVerifier when you have finished using the instance.

Property List

The following is the full list of the properties of the struct with short descriptions. Click on the links for further details.


all_signatures_valid	The cumulative validity of all signatures.
auto_validate_signatures	Specifies whether ASiCVerifier should validate any present signatures when the document is opened.
blocked_cert_count	The number of records in the BlockedCert arrays.
blocked_cert_bytes	Returns the raw certificate data in DER format.
blocked_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
cert_count	The number of records in the Cert arrays.
cert_bytes	Returns the raw certificate data in DER format.
cert_ca	Indicates whether the certificate has a CA capability.
cert_ca_key_id	A unique identifier (fingerprint) of the CA certificate's cryptographic key.
cert_type	Returns the type of the entity contained in the Certificate object.
cert_crl_distribution_points	Contains a list of locations of CRL distribution points used to check this certificate's validity.
cert_curve	Specifies the elliptic curve associated with the certificate's public key.
cert_fingerprint	Contains the fingerprint (a hash imprint) of this certificate.
cert_friendly_name	Contains an associated alias (friendly name) of the certificate.
cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
cert_hash_algorithm	Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing).
cert_issuer	The common name of the certificate issuer (CA), typically a company name.
cert_issuer_rdn	A list of Property=Value pairs that uniquely identify the certificate issuer.
cert_key_algorithm	Specifies the public key algorithm of this certificate.
cert_key_bits	Returns the length of the public key in bits.
cert_key_fingerprint	Returns a SHA1 fingerprint of the public key contained in the certificate.
cert_key_usage	Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
cert_key_valid	Returns True if the certificate's key is cryptographically valid, and False otherwise.
cert_ocsp_locations	Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.
cert_ocsp_no_check	Accessor to the value of the certificate's ocsp-no-check extension.
cert_origin	Returns the location that the certificate was taken or loaded from.
cert_policy_i_ds	Contains identifiers (OIDs) of the applicable certificate policies.
cert_private_key_bytes	Returns the certificate's private key in DER-encoded format.
cert_private_key_exists	Indicates whether the certificate has a usable private key associated with it.
cert_private_key_extractable	Indicates whether the private key is extractable (exportable).
cert_public_key_bytes	Contains the certificate's public key in DER format.
cert_qualified	Indicates whether the certificate is qualified.
cert_qualified_statements	Returns a simplified qualified status of the certificate.
cert_qualifiers	A list of qualifiers.
cert_self_signed	Indicates whether the certificate is self-signed (root) or signed by an external CA.
cert_serial_number	Returns the certificate's serial number.
cert_sig_algorithm	Indicates the algorithm that was used by the CA to sign this certificate.
cert_source	Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.
cert_subject	The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
cert_subject_alternative_name	Returns or sets the value of the Subject Alternative Name extension of the certificate.
cert_subject_key_id	Contains a unique identifier of the certificate's cryptographic key.
cert_subject_rdn	A list of Property=Value pairs that uniquely identify the certificate holder (subject).
cert_valid	Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.
cert_valid_from	The time point at which the certificate becomes valid, in UTC.
cert_valid_to	The time point at which the certificate expires, in UTC.
check_trusted_lists	Specifies whether the struct should attempt to validate chain trust via a known Trusted List.
crl_count	The number of records in the CRL arrays.
crl_bytes	Returns the raw CRL data in DER format.
crlca_key_id	A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.
crl_entry_count	Returns the number of certificate status entries in the CRL.
crl_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
crl_issuer	The common name of the CRL issuer (CA), typically a company name.
crl_issuer_rdn	A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.
crl_location	The URL that the CRL was downloaded from.
crl_next_update	The planned time and date of the next version of this CRL to be published.
crl_sig_algorithm	The public key algorithm that was used by the CA to sign this CRL.
crl_source	Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.
crltbs	The to-be-signed part of the CRL (the CRL without the signature part).
crl_this_update	The date and time at which this version of the CRL was published.
extraction_mode	Specifies which entries should be extracted from the container upon verification.
file_count	The number of records in the File arrays.
file_action	This property contains the action to apply to the file.
file_attributes	This property provides access to file attributes.
file_compressed_size	This property contains the size of the file after compression.
file_data_source	This property contains the type of data source for this entry.
file_directory	This property tells if the entry is a directory or a regular file.
file_encryption_algorithm	This property returns the symmetric algorithm that was used to encrypt the file.
file_encryption_key_length	This property returns the length, in bits, of the encryption key.
file_encryption_type	This property contains the type of encryption applied to the file.
file_name	This property specifies the original name of the compressed file or folder.
file_folder	This property includes the containing folder of the entry.
file_local_path	This property contains the local path associated with this entry.
file_m_time	This property contains the entry's last modification time.
file_new_file	This property indicates whether the entry corresponds to a file to be added to the archive.
file_path	This property contains the full internal path of the archived entry.
file_signature_count	This property includes the number of signatures covering the entry.
file_signed	This property indicates whether the entry is signed.
file_size	This property specifies the size of the file before compression.
fips_mode	Reserved.
ignore_chain_validation_errors	Makes the struct tolerant to chain validation errors.
input_bytes	Use this property to pass the input to struct in byte array form.
input_file	A path to the ASiC container to process.
known_cert_count	The number of records in the KnownCert arrays.
known_cert_bytes	Returns the raw certificate data in DER format.
known_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
known_crl_count	The number of records in the KnownCRL arrays.
known_crl_bytes	Returns the raw CRL data in DER format.
known_crl_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
known_ocsp_count	The number of records in the KnownOCSP arrays.
known_ocsp_bytes	A buffer containing the raw OCSP response data.
known_ocsp_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
ocsp_count	The number of records in the OCSP arrays.
ocsp_bytes	A buffer containing the raw OCSP response data.
ocsp_entry_count	The number of SingleResponse elements contained in this OCSP response.
ocsp_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
ocsp_issuer	Indicates the issuer of this response (a CA or its authorized representative).
ocsp_issuer_rdn	Indicates the RDN of the issuer of this response (a CA or its authorized representative).
ocsp_location	The location of the OCSP responder.
ocsp_produced_at	Specifies the time when the response was produced, in UTC.
ocsp_sig_algorithm	The public key algorithm that was used by the CA to sign this OCSP response.
ocsp_source	Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.
offline_mode	Switches the struct to offline mode.
output_bytes	Use this property to read the output the struct object has produced.
output_file	The file where the processed data will be saved.
output_path	A local path to extract the files to.
profile	Specifies a pre-defined profile to apply when creating the signature.
proxy_address	The IP address of the proxy server.
proxy_authentication	The authentication type used by the proxy server.
proxy_password	The password to authenticate to the proxy server.
proxy_port	The port on the proxy server to connect to.
proxy_type	The type of the proxy server.
proxy_request_headers	Contains HTTP request headers for WebTunnel and HTTP proxy.
proxy_response_body	Contains the HTTP or HTTPS (WebTunnel) proxy response body.
proxy_response_headers	Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.
proxy_use_ipv6	Specifies whether IPv6 should be used when connecting through the proxy.
proxy_username	Specifies the username credential for proxy authentication.
revocation_check	Specifies the kind(s) of revocation check to perform for all chain certificates.
signature_count	The number of records in the Signature arrays.
signature_chain_validation_details	The details of a certificate chain validation outcome.
signature_chain_validation_result	The outcome of a certificate chain validation routine.
signature_claimed_signing_time	Returns or sets signature's creation time.
signature_compatibility_errors	Returns compatibility errors encountered during validation.
signature_contains_long_term_info	Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).
signature_content_type	The signature content type.
signature_entity_label	Use this property to get the signature entity label.
signature_file_name	The name of the ASiC signature file.
signature_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
signature_hash_algorithm	Set or returns the hash algorithm used to generate the signature.
signature_issuer_rdn	The Relative Distinguished Name of the signing certificate's issuer.
signature_level	Specifies the level according to which the inner AdES signature is to be composed CAdES and XAdES standards define a number of signature levels.
signature_policy_hash	The signature policy hash value.
signature_policy_hash_algorithm	The algorithm that was used to calculate the signature policy hash Use this property to get or set the hash algorithm used to calculate the signature policy hash.
signature_policy_id	The policy ID that was included or to be included into the signature.
signature_policy_uri	The signature policy URI that was included in the signature.
signature_serial_number	The serial number of the signing certificate.
signature_bytes	Returns the binary representation of the ASiC signature.
signature_type	The type of the ASiC signature: CAdES, XAdES, timestamp, or unknown.
signature_validation_result	The outcome of the cryptographic signature validation.
signature_signed_files	Contains a comma-separated list of files that are covered by the signature.
signature_subject_key_id	Contains the subject key identifier of the signing certificate.
signature_subject_rdn	Contains the RDN of the owner of the signing certificate.
signature_timestamped	Use this property to establish whether the signature contains an embedded timestamp.
signature_validated_signing_time	Contains the certified signing time.
signature_validation_log	Contains the signing certificate's chain validation log.
socket_dns_mode	Selects the DNS resolver to use: the struct's (secure) built-in one, or the one provided by the system.
socket_dns_port	Specifies the port number to be used for sending queries to the DNS server.
socket_dns_query_timeout	The timeout (in milliseconds) for each DNS query.
socket_dns_servers	The addresses of DNS servers to use for address resolution, separated by commas or semicolons.
socket_dns_total_timeout	The timeout (in milliseconds) for the whole resolution process.
socket_incoming_speed_limit	The maximum number of bytes to read from the socket, per second.
socket_local_address	The local network interface to bind the socket to.
socket_local_port	The local port number to bind the socket to.
socket_outgoing_speed_limit	The maximum number of bytes to write to the socket, per second.
socket_timeout	The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
socket_use_ipv6	Enables or disables IP protocol version 6.
timestamp_count	The number of records in the Timestamp arrays.
timestamp_accuracy	This property indicates the accuracy of the included time mark, in microseconds.
timestamp_bytes	Returns the raw timestamp data in DER format.
timestamp_certificate_index	Returns the index of the TSA certificate in the Certificates collection.
timestamp_chain_validation_details	The details of a certificate chain validation outcome.
timestamp_chain_validation_result	The outcome of a certificate chain validation routine.
timestamp_contains_long_term_info	Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).
timestamp_entity_label	Use this property to get the timestamp entity label.
timestamp_hash_algorithm	Returns the timestamp's hash algorithm.
timestamp_parent_entity	Use this property to get the label of the timestamp's parent entity.
timestamp_serial_number	Returns the timestamp's serial number.
timestamp_time	The time point incorporated into the timestamp.
timestamp_type	Returns the type of the timestamp.
timestamp_tsa_name	This value uniquely identifies the Timestamp Authority (TSA).
timestamp_validation_log	Contains the TSA certificate chain validation log.
timestamp_validation_result	Contains the timestamp validation outcome.
tls_client_cert_count	The number of records in the TLSClientCert arrays.
tls_client_cert_bytes	Returns the raw certificate data in DER format.
tls_client_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
tls_server_cert_count	The number of records in the TLSServerCert arrays.
tls_server_cert_bytes	Returns the raw certificate data in DER format.
tls_server_cert_fingerprint	Contains the fingerprint (a hash imprint) of this certificate.
tls_server_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
tls_server_cert_issuer	The common name of the certificate issuer (CA), typically a company name.
tls_server_cert_issuer_rdn	A list of Property=Value pairs that uniquely identify the certificate issuer.
tls_server_cert_key_algorithm	Specifies the public key algorithm of this certificate.
tls_server_cert_key_bits	Returns the length of the public key in bits.
tls_server_cert_key_usage	Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
tls_server_cert_self_signed	Indicates whether the certificate is self-signed (root) or signed by an external CA.
tls_server_cert_serial_number	Returns the certificate's serial number.
tls_server_cert_sig_algorithm	Indicates the algorithm that was used by the CA to sign this certificate.
tls_server_cert_subject	The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
tls_server_cert_subject_rdn	A list of Property=Value pairs that uniquely identify the certificate holder (subject).
tls_server_cert_valid_from	The time point at which the certificate becomes valid, in UTC.
tls_server_cert_valid_to	The time point at which the certificate expires, in UTC.
tls_auto_validate_certificates	Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.
tls_base_configuration	Selects the base configuration for the TLS settings.
tls_ciphersuites	A list of ciphersuites separated with commas or semicolons.
tls_client_auth	Enables or disables certificate-based client authentication.
tls_extensions	Provides access to TLS extensions.
tls_force_resume_if_destination_changes	Whether to force TLS session resumption when the destination address changes.
tls_groups	Specifies a list of key exchange groups to attempt during the TLS key exchange.
tls_pre_shared_identity	Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
tls_pre_shared_key	Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
tls_pre_shared_key_ciphersuite	Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
tls_renegotiation_attack_prevention_mode	Selects the renegotiation attack prevention mechanism.
tls_revocation_check	Specifies the kind(s) of revocation check to perform.
tls_ssl_options	Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.
tls_mode	Specifies the TLS mode to use.
tls_use_extended_master_secret	Enables the Extended Master Secret Extension, as defined in RFC 7627.
tls_use_session_resumption	Enables or disables the TLS session resumption capability.
tls_versions	The SSL/TLS versions to enable by default.
trusted_cert_count	The number of records in the TrustedCert arrays.
trusted_cert_bytes	Returns the raw certificate data in DER format.
trusted_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
validation_moment	The time point at which signature validity is to be established.

Method List

The following is the full list of the methods of the struct with short descriptions. Click on the links for further details.


close	Closes an opened container.
config	Sets or retrieves a configuration setting.
do_action	Performs an additional action.
extract_file	Extracts a file to one of the output media (bytes, stream, or disk file).
extract_files	Extracts files covered by a signature to OutputPath .
open	Opens an existing container for signing or updating.
reset	Resets the struct settings.
revalidate	Revalidates a signature in accordance with current settings.
select_info	Select signature information for a specific entity.
unsign	Deletes a signature from the container.
verify	Verifies all signatures in the ASiC container.

Event List

The following is the full list of the events fired by the struct with short descriptions. Click on the links for further details.


on_chain_element_download	Fires when there is a need to download a chain element from an online source.
on_chain_element_needed	Fires when an element required to validate the chain was not located.
on_chain_element_store	This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.
on_chain_validated	Reports the completion of a certificate chain validation.
on_chain_validation_progress	This event is fired multiple times during chain validation to report various stages of the validation procedure.
on_container_loaded	This event is fired when the container has been loaded into memory.
on_error	Information about errors during ASiC signature verification.
on_file_extraction_start	Signifies the start of a file extraction process.
on_notification	This event notifies the application about an underlying control flow event.
on_signature_found	Signifies the start of signature validation.
on_signature_validated	Marks the completion of the signature validation routine.
on_timestamp_found	Signifies the start of a timestamp validation routine.
on_timestamp_validated	Reports the completion of the timestamp validation routine.
on_tls_cert_needed	Fires when a remote TLS party requests a client certificate.
on_tls_cert_validate	This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
on_tls_established	Fires when a TLS handshake with Host successfully completes.
on_tls_handshake	Fires when a new TLS handshake is initiated, before the handshake commences.
on_tls_shutdown	Reports the graceful closure of a TLS connection.

Config Settings

The following is a list of config settings for the struct with short descriptions. Click on the links for further details.


AddAllDataObjectsTimestamp	Whether to add all data objects timestamp during signing.
AsyncDocumentID	Specifies the document ID for SignAsyncEnd() call.
CachedCRLMaxAge	Specifies the maximum age of a cached CRL.
CachedCRLMaxAgeRatio	Specifies the maximum age of a cached CRL as a percentage of its remaining lifetime.
CachedCRLOverlapTime	Specifies the time period before a cached CRL's NextUpdate when it is considered stale and must be refreshed.
CachedOCSPResponseMaxAge	Specifies the maximum age of a cached OCSP response.
CachedOCSPResponseMaxAgeRatio	Specifies the maximum age of a cached OCSP response as a percentage of its remaining lifetime.
CachedOCSPResponseOverlapTime	Specifies the time period before a cached OCSP response's NextUpdate when it is considered stale and must be refreshed.
ChainCurrentCACert	Returns the current CA certificate.
ChainCurrentCert	Returns the certificate that is currently being validated.
ChainCurrentCRL	Returns the current CRL.
ChainCurrentCRLSize	Returns the size of the current CRL.
ChainCurrentOCSP	Returns the current OCSP response.
ChainCurrentOCSPSigner	Returns the signer of the current OCSP object.
ChainInterimDetails	Returns the current interim validation details.
ChainInterimResult	Returns the current interim validation result.
CheckValidityPeriodForTrusted	Whether to check validity period for trusted certificates.
ClaimedRolesXML	The XML content of the claimed roles.
ClaimedRoleText	The text of the claimed role.
CmsOptAnnexKArchiveTimestampV2Mode	Toggles use of Annex K method of calculating validation timestamp hashes.
CmsOptCheckATSHashIndexElements	Enables extra checks when processing ATSHashIndex attribute.
CmsOptCompareRDNAsStrings	Enforces comparison of RDN elements as text strings, rather than their byte encodings.
CmsOptDEREncodeContentForATSv2	Enables DER encoding for ATSv2 hashed content.
CmsOptDigitPADSSCompatibility	Enables Digit PADSS compatibility mode.
CmsOptForceSigningCertificateV2Usage	Enforces use of signing-certificate-v2 attribute.
CmsOptIgnoreDERReqInArchiveTimestamps	Switches off DER encoding requirement for archival timestamps.
CmsOptImzagerMIMCompatibility	Enables Imzager MIM compatibility mode.
CmsOptIncludeCertToAttributes	Regulates whether to include the signing certificate to the signature as the signing-certificate attribute.
CmsOptIncludeCertToMessage	Regulates whether to include the signing certificate and its chain to the CMS.
CmsOptInsertContentType	Regulates whether the content-type time attribute should be included in the signature structure.
CmsOptInsertMessageDigests	Regulates whether the message-digest signed attribute should be included in the signature structure.
CmsOptInsertSigningTime	Regulates whether the signing-time attribute should be included in the signature structure.
CmsOptSkipEnvContentInfoOnSigArchival	Excludes hashing of enveloped content when calculating an archival timestamp.
CmsOptUseATSHashIndexV1	Enables use of ATSHashIndexV1 attribute.
CmsOptUseATSHashIndexV3	Enables the use of the third version of archival timestamps.
CmsOptUseGeneralizedTimeFormat	Enables or disables encoding of the signing-time attribute using ASN.1 GENERALIZEDTIME type.
CmsOptUseGenericSigAlgorithmOIDs	Enables use of generic signature algorithm OIDs in the signature.
CmsOptUsePlainContentForTimestampHashes	Makes CAdESSigner ignore ASN.1 content formatting when calculating timestamp hashes.
CommitmentTypeIndicationAllSignedDataObjects[Index]	Specifies the CommitmentTypeIndication's AllSignedDataObjects.
CommitmentTypeIndicationCount	The number of the CommitmentTypeIndication elements.
CommitmentTypeIndicationIdentifier[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier.
CommitmentTypeIndicationIdentifierDescription[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's Description.
CommitmentTypeIndicationIdentifierDocumentationReferences[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences.
CommitmentTypeIndicationIdentifierQualifier[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier.
CommitmentTypeIndicationObjectReference[Index]	Specifies the CommitmentTypeIndication's ObjectReference.
CommitmentTypeIndicationQualifiersXML[Index]	The XML content of the CommitmentTypeIndication's Qualifiers.
CustomTrustedLists	Specifies the custom TrustedLists.
CustomTSLs	Specifies the custom TrustedLists.
DataObjectFormatCount	The number of the DataObjectFormat elements.
DataObjectFormatDescription[Index]	Specifies the DataObjectFormat's Description.
DataObjectFormatEncoding[Index]	Specifies the DataObjectFormat's Encoding.
DataObjectFormatMimeType[Index]	Specifies the DataObjectFormat's MimeType.
DataObjectFormatObjectIdentifier[Index]	Specifies the DataObjectFormat's ObjectIdentifier's Identifier.
DataObjectFormatObjectIdentifierDescription[Index]	Specifies the DataObjectFormat's ObjectIdentifier's Description.
DataObjectFormatObjectIdentifierDocumentationReferences[Index]	Specifies the DataObjectFormat's ObjectIdentifier's DocumentationReferences.
DataObjectFormatObjectIdentifierQualifier[Index]	Specifies the DataObjectFormat's ObjectIdentifier's IdentifierQualifier.
DataObjectFormatObjectReference[Index]	Specifies the DataObjectFormat's ObjectReference.
DeltaCRLPreference	Specifies whether complete or delta CRLs are preferred.
DislikeOpenEndedOCSPs	Tells the struct to discourage OCSP responses without an explicit NextUpdate parameter.
EvaluateSystemTrust	Enables or disables usage of the platform's built-in trust validation facilities.
EvaluateSystemTrustForSelfSignedCertificates	Enables or disables usage of the platform's built-in trust validation facilities for self-signed certificates.
EvaluateSystemTrustForSSL	Enables or disables usage of the platform's built-in trust validation facilities for SSL/TLS.
ExclusiveCanonicalizationPrefix	Specifies the exclusive canonicalization prefix.
ForceCompleteChainValidation	Whether to check the CA certificates when the signing certificate is invalid.
ForceCompleteChainValidationForTrusted	Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.
GracePeriod	Specifies a grace period to apply during revocation information checks.
HMACKey	The key value for HMAC.
HMACOutputLength	Sets the length of the HMAC output.
HMACSigningUsed	Whether to use HMAC signing.
IgnoreChainLoops	Whether chain loops should be ignored.
IgnoreChainValidationErrors	Whether to ignore any certificate chain validation issues.
IgnoreOCSPNoCheckExtension	Whether the OCSP NoCheck extension should be ignored.
IgnoreSystemTrust	Whether trusted Windows Certificate Stores should be treated as trusted.
IgnoreTimestampFailure	Whether to ignore time-stamping failure during signing.
ImplicitlyTrustSelfSignedCertificates	Whether to trust self-signed certificates.
IncludeKnownRevocationInfoToSignature	Whether to include custom revocation info to the signature.
InclusiveNamespacesPrefixList	Specifies the InclusiveNamespaces PrefixList.
KeyInfoID	Specifies the ID for KeyInfo element.
KeyName	Contains information about the key used for signing.
Overwrite	Forcefully overwrite OutputFile if it exists.
PolicyDescription	signature policy description.
PolicyExplicitText	The explicit text of the user notice.
PolicyUNNumbers	The noticeNumbers part of the NoticeReference CAdES attribute.
PolicyUNOrganization	The organization part of the NoticeReference qualifier.
ProductionPlace	Identifies the place of the signature production.
PromoteLongOCSPResponses	Whether long OCSP responses are requested.
PSSUsed	Whether to use RSASSA-PSS algorithm.
QualifyingPropertiesID	Specifies the ID for QualifyingProperties element.
QualifyingPropertiesObjectID	Specifies the ID for object with QualifyingProperties element.
QualifyingPropertiesReferenceCount	The number of the QualifyingPropertiesReference elements.
QualifyingPropertiesReferenceID[Index]	Specifies the QualifyingPropertiesReference's ID.
QualifyingPropertiesReferenceURI[Index]	Specifies the QualifyingPropertiesReference's URI.
RefsTimestampType	Specifies references timestamp type to include to the signature.
RevocationCacheAgePolicy	Specifies a preset policy for cached CRL and OCSP response freshness settings.
SchemeParams	The algorithm scheme parameters to employ.
SignatureID	Specifies the ID for Signature element.
SignaturePrefix	Specifies the signature prefix.
SignatureValueID	Specifies the ID for SignatureValue element.
SignedInfoID	Specifies the ID for SignedInfo element.
SignedPropertiesID	Specifies the ID for SignedProperties element.
SignedPropertiesReferenceCanonicalizationMethod	Specifies the canonicalization method used in SignedProperties reference.
SignedPropertiesReferenceHashAlgorithm	Specifies the hash algorithm used in SignedProperties reference.
SignedPropertiesReferenceID	Specifies the ID for Reference element that points to SignedProperties element.
SignedPropertiesReferenceInclusiveNamespacesPrefixList	Specifies the InclusiveNamespaces PrefixList used in SignedProperties reference.
SignedPropertiesReferenceIndex	Specifies the index of SignedProperties reference.
SignedSignaturePropertiesID	Specifies the ID for SignedSignatureProperties element.
SigningCertificatesChain	Specifies which certificates from SigningChain are included in the xades:SigningCertificate element.
SigningCertificatesHashAlgorithm	Specifies the hash algorithm used for SigningCertificates.
SigningTimeFormat	Specifies the date time format for the XAdES signing time.
SigningTimeIsUTC	Specifies whether the XAdES signing time is in UTC.
SigningTimeZoneOffset	Specifies the time zone offset for the XAdES signing time.
SigPolicyDescription	signature policy description.
SigPolicyExplicitText	The explicit text of the user notice.
SigPolicyHash	The EPES policy hash.
SigPolicyHashAlgorithm	The hash algorithm that was used to generate the EPES policy hash.
SigPolicyID	The EPES policy ID.
SigPolicyNoticeNumbers	The noticeNumbers part of the NoticeReference CAdES attribute.
SigPolicyNoticeOrganization	The organization part of the NoticeReference qualifier.
SigPolicyURI	The EPES policy URI.
TempPath	Path for storing temporary files.
TimestampCanonicalizationMethod	Specifies canonicalization method used in timestamp.
TimestampResponse	A base16-encoded timestamp response received from a TSA.
TimestampValidationDataDetails	Specifies timestamp validation data details to include to the signature.
TLSChainValidationDetails	Contains the advanced details of the TLS server certificate validation.
TLSChainValidationResult	Contains the result of the TLS server certificate validation.
TLSClientAuthRequested	Indicates whether the TLS server requests client authentication.
TLSValidationLog	Contains the log of the TLS server certificate validation.
TolerateMinorChainIssues	Whether to tolerate minor chain issues.
TspAttemptCount	Specifies the number of timestamping request attempts.
TspHashAlgorithm	Sets a specific hash algorithm for use with the timestamping service.
TspReqPolicy	Sets a request policy ID to include in the timestamping request.
UseDefaultTrustedLists	Enables or disables the use of the default TrustedLists.
UseDefaultTSLs	Enables or disables the use of the default TrustedLists.
UseEnvStorages	Enables or disables use of the environment storages.
UseHMACSigning	Whether to use HMAC signing.
UseMicrosoftCTL	Enables or disables the automatic use of the Microsoft online certificate trust list.
UsePSS	Whether to use RSASSA-PSS algorithm.
UseSystemCertificates	Enables or disables the use of the system certificates.
UseUTF8Filenames	Specifies whether to use UTF-8 filenames.
UseValidationCache	Enables or disable the use of the product-wide certificate chain validation cache.
UseValidatorSettingsForTLSValidation	Whether to employ the primary chain validator setup for auxiliary TLS chain validations.
ValidationDataRefsDetails	Specifies validation data references details to include to the signature.
ValidationDataRefsHashAlgorithm	Specifies the hash algorithm used in validation data references.
ValidationDataValuesDetails	Specifies validation data values details to include to the signature.
XAdESPrefix	Specifies the XAdES prefix.
XAdESv141Prefix	Specifies the XAdES v1.4.1 prefix.
ASN1UseGlobalTagCache	Controls whether ASN.1 module should use a global object cache.
AssignSystemSmartCardPins	Specifies whether CSP-level PINs should be assigned to CNG keys.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the struct.
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
DNSLocalSuffix	The suffix to assign for TLD names.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
EnableSSHMLKEM	Enables support for ML-KEM/hybrid key exchange algorithms in SSH client and server structs.
EnableTLSMLKEM	Enables support for ML-KEM and hybrid groups in TLS client and server structs.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HardwareCryptoUsePolicy	The hardware crypto usage policy.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
HttpVersion	The HTTP version to use in any inner HTTP client structs created.
IgnoreExpiredMSCTLSigningCert	Whether to tolerate the expired Windows Update signing certificate.
ListDelimiter	The delimiter character for multi-element lists.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
OldClientSideRSAFallback	Specifies whether the SSH client should use a SHA1 fallback.
PKICache	Specifies which PKI elements (certificates, CRLs, OCSP responses) should be cached.
PKICachePath	Specifies the file system path where cached PKI data is stored.
ProductVersion	Returns the version of the SecureBlackbox library.
ServerSSLDHKeyLength	Sets the size of the TLS DHE key exchange group.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseCRLObjectCaching	Specifies whether reuse of loaded CRL objects is enabled.
UseInternalRandom	Switches between SecureBlackbox-own and platform PRNGs.
UseLegacyAdESValidation	Enables legacy AdES validation mode.
UseOCSPResponseObjectCaching	Specifies whether reuse of loaded OCSP response objects is enabled.
UseOwnDNSResolver	Specifies whether the client structs should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemNativeSizeCalculation	An internal CryptoAPI access tweak.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.
XMLRDNDescriptorName[OID]	Defines an OID mapping to descriptor names for the certificate's IssuerRDN or SubjectRDN.
XMLRDNDescriptorPriority[OID]	Specifies the priority of descriptor names associated with a specific OID.
XMLRDNDescriptorReverseOrder	Specifies whether to reverse the order of descriptors in RDN.
XMLRDNDescriptorSeparator	Specifies the separator used between descriptors in RDN.

all_signatures_valid property (ASiCVerifier Struct)

The cumulative validity of all signatures.

Syntax

fn all_signatures_valid(&self ) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Use this property to check if all the signatures found in the message or document are valid.

This property is read-only.

Data Type

bool

auto_validate_signatures property (ASiCVerifier Struct)

Specifies whether ASiCVerifier should validate any present signatures when the document is opened.

Syntax

fn auto_validate_signatures(&self ) -> Result<bool, SecureBlackboxError> 
fn set_auto_validate_signatures(&self, value : bool) ->  Option<SecureBlackboxError>

Default Value

true

Remarks

This setting is switched on by default. You can choose to set this property to false in order to validate the signatures manually on a later stage using the revalidate method.

Data Type

bool

blocked_cert_count property (ASiCVerifier Struct)

The number of records in the BlockedCert arrays.

Syntax

fn blocked_cert_count(&self ) -> Result<i32, SecureBlackboxError> 
fn set_blocked_cert_count(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

blocked_cert_bytes
blocked_cert_handle

The array indices start at 0 and end at blocked_cert_count - 1.

Data Type

i32

blocked_cert_bytes property (ASiCVerifier Struct)

Returns the raw certificate data in DER format.

Syntax

fn blocked_cert_bytes(&self , BlockedCertIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the raw certificate data in DER format.

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is read-only.

Data Type

Vec

blocked_cert_handle property (ASiCVerifier Struct)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

fn blocked_cert_handle(&self , BlockedCertIndex : i32) -> Result<i64, SecureBlackboxError> 
fn set_blocked_cert_handle(&self, BlockedCertIndex : i32, value : i64) ->  Option<SecureBlackboxError>

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

Data Type

i64

cert_count property (ASiCVerifier Struct)

The number of records in the Cert arrays.

Syntax

fn cert_count(&self ) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

cert_bytes
cert_ca
cert_ca_key_id
cert_crl_distribution_points
cert_curve
cert_fingerprint
cert_friendly_name
cert_handle
cert_hash_algorithm
cert_issuer
cert_issuer_rdn
cert_key_algorithm
cert_key_bits
cert_key_fingerprint
cert_key_usage
cert_key_valid
cert_ocsp_locations
cert_ocsp_no_check
cert_origin
cert_policy_i_ds
cert_private_key_bytes
cert_private_key_exists
cert_private_key_extractable
cert_public_key_bytes
cert_qualified
cert_qualified_statements
cert_qualifiers
cert_self_signed
cert_serial_number
cert_sig_algorithm
cert_source
cert_subject
cert_subject_alternative_name
cert_subject_key_id
cert_subject_rdn
cert_type
cert_valid
cert_valid_from
cert_valid_to

The array indices start at 0 and end at cert_count - 1.

This property is read-only.

Data Type

i32

cert_bytes property (ASiCVerifier Struct)

Returns the raw certificate data in DER format.

Syntax

fn cert_bytes(&self , CertIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the raw certificate data in DER format.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

Vec

cert_ca property (ASiCVerifier Struct)

Indicates whether the certificate has a CA capability.

Syntax

fn cert_ca(&self , CertIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Indicates whether the certificate has a CA capability. For the certificate to be considered a CA, it must have its Basic Constraints extension set with the CA indicator enabled.

Set this property when generating a new certificate to have its Basic Constraints extension generated automatically.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

bool

cert_ca_key_id property (ASiCVerifier Struct)

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Syntax

fn cert_ca_key_id(&self , CertIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.

This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the cert_subject_key_id setting, and for lower-level certificates, from the parent certificate's subject key ID extension.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

Vec

cert_type property (ASiCVerifier Struct)

Returns the type of the entity contained in the Certificate object.

Syntax

fn cert_type(&self , CertIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // Unknown
1   // X509Certificate
2   // X509CertificateRequest

Default Value

Remarks

Returns the type of the entity contained in the Certificate object.

A Certificate object can contain two types of cryptographic objects: a ready-to-use X.509 certificate, or a certificate request ("an unsigned certificate"). Certificate requests can be upgraded to full certificates by signing them with a CA certificate.

Use the CertificateManager struct to load or create new certificate and certificate requests objects.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

i32

cert_crl_distribution_points property (ASiCVerifier Struct)

Contains a list of locations of CRL distribution points used to check this certificate's validity.

Syntax

fn cert_crl_distribution_points(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Contains a list of locations of CRL distribution points used to check this certificate's validity. The list is taken from the respective certificate extension.

Use this property when generating a certificate to provide a list of CRL endpoints that should be made part of the new certificate.

The endpoints are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_curve property (ASiCVerifier Struct)

Specifies the elliptic curve associated with the certificate's public key.

Syntax

fn cert_curve(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Specifies the elliptic curve associated with the certificate's public key. This setting only applies to certificates containing EC keys.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_fingerprint property (ASiCVerifier Struct)

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

fn cert_fingerprint(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_friendly_name property (ASiCVerifier Struct)

Contains an associated alias (friendly name) of the certificate.

Syntax

fn cert_friendly_name(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Contains an associated alias (friendly name) of the certificate. The friendly name is not a property of a certificate: it is maintained by the certificate media rather than being included in its DER representation. Windows certificate stores are one example of media that does support friendly names.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_handle property (ASiCVerifier Struct)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

fn cert_handle(&self , CertIndex : i32) -> Result<i64, SecureBlackboxError>

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

i64

cert_hash_algorithm property (ASiCVerifier Struct)

Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing).

Syntax

fn cert_hash_algorithm(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing). It is not a property of a certificate; use cert_sig_algorithm to find out the hash algorithm that is part of the certificate signature.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_issuer property (ASiCVerifier Struct)

The common name of the certificate issuer (CA), typically a company name.

Syntax

fn cert_issuer(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via cert_issuer_rdn.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_issuer_rdn property (ASiCVerifier Struct)

A list of Property=Value pairs that uniquely identify the certificate issuer.

Syntax

fn cert_issuer_rdn(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_key_algorithm property (ASiCVerifier Struct)

Specifies the public key algorithm of this certificate.

Syntax

fn cert_key_algorithm(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`
SB_CERT_ALGORITHM_MLDSA_44	`id-ml-dsa-44`
SB_CERT_ALGORITHM_MLDSA_65	`id-ml-dsa-65`
SB_CERT_ALGORITHM_MLDSA_87	`id-ml-dsa-87`
SB_CERT_ALGORITHM_HASH_MLDSA_44_SHA512	`id-hash-ml-dsa-44-with-sha512`
SB_CERT_ALGORITHM_HASH_MLDSA_65_SHA512	`id-hash-ml-dsa-65-with-sha512`
SB_CERT_ALGORITHM_HASH_MLDSA_87_SHA512	`id-hash-ml-dsa-87-with-sha512`
SB_CERT_ALGORITHM_MLKEM_512	`id-ml-kem-512`
SB_CERT_ALGORITHM_MLKEM_768	`id-ml-kem-768`
SB_CERT_ALGORITHM_MLKEM_1024	`id-ml-kem-1024`

Use the cert_key_bits, cert_curve, and cert_public_key_bytes properties to get more details about the key the certificate contains.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_key_bits property (ASiCVerifier Struct)

Returns the length of the public key in bits.

Syntax

fn cert_key_bits(&self , CertIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the cert_public_key_bytes or cert_private_key_bytes property would typically contain auxiliary values, and therefore be longer.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

i32

cert_key_fingerprint property (ASiCVerifier Struct)

Returns a SHA1 fingerprint of the public key contained in the certificate.

Syntax

fn cert_key_fingerprint(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Returns a SHA1 fingerprint of the public key contained in the certificate.

Note that the key fingerprint is different from the certificate fingerprint accessible via the cert_fingerprint property. The key fingerprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_key_usage property (ASiCVerifier Struct)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

fn cert_key_usage(&self , CertIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

Set this property before generating the certificate to propagate the key usage flags to the new certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

i32

cert_key_valid property (ASiCVerifier Struct)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Syntax

fn cert_key_valid(&self , CertIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

bool

cert_ocsp_locations property (ASiCVerifier Struct)

Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.

Syntax

fn cert_ocsp_locations(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.

Set this property before calling the certificate manager's generate method to propagate it to the new certificate.

The OCSP locations are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_ocsp_no_check property (ASiCVerifier Struct)

Accessor to the value of the certificate's ocsp-no-check extension.

Syntax

fn cert_ocsp_no_check(&self , CertIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Accessor to the value of the certificate's ocsp-no-check extension.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

bool

cert_origin property (ASiCVerifier Struct)

Returns the location that the certificate was taken or loaded from.

Syntax

fn cert_origin(&self , CertIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

Returns the location that the certificate was taken or loaded from.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

i32

cert_policy_i_ds property (ASiCVerifier Struct)

Contains identifiers (OIDs) of the applicable certificate policies.

Syntax

fn cert_policy_i_ds(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

Set this property when generating a certificate to propagate the policies information to the new certificate.

The policies are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the policy element separator.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_private_key_bytes property (ASiCVerifier Struct)

Returns the certificate's private key in DER-encoded format.

Syntax

fn cert_private_key_bytes(&self , CertIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the certificate's private key in DER-encoded format. It is normal for this property to be empty if the private key is non-exportable, which, for example, is typical for certificates originating from hardware security devices.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

Vec

cert_private_key_exists property (ASiCVerifier Struct)

Indicates whether the certificate has a usable private key associated with it.

Syntax

fn cert_private_key_exists(&self , CertIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Indicates whether the certificate has a usable private key associated with it. If it is set to True, the certificate can be used for private key operations, such as signing or decryption.

This property is independent from cert_private_key_bytes, and can be set to True even if the former is empty. This would imply that the private key is non-exportable, but still can be used for cryptographic operations.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

bool

cert_private_key_extractable property (ASiCVerifier Struct)

Indicates whether the private key is extractable (exportable).

Syntax

fn cert_private_key_extractable(&self , CertIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Indicates whether the private key is extractable (exportable).

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

bool

cert_public_key_bytes property (ASiCVerifier Struct)

Contains the certificate's public key in DER format.

Syntax

fn cert_public_key_bytes(&self , CertIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Contains the certificate's public key in DER format.

This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

Vec

cert_qualified property (ASiCVerifier Struct)

Indicates whether the certificate is qualified.

Syntax

fn cert_qualified(&self , CertIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Indicates whether the certificate is qualified.

This property is set to True if the certificate is confirmed by a Trusted List to be qualified.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

bool

cert_qualified_statements property (ASiCVerifier Struct)

Returns a simplified qualified status of the certificate.

Syntax

fn cert_qualified_statements(&self , CertIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // NonQualified
1   // QualifiedHardware
2   // QualifiedSoftware

Default Value

Remarks

Returns a simplified qualified status of the certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

i32

cert_qualifiers property (ASiCVerifier Struct)

A list of qualifiers.

Syntax

fn cert_qualifiers(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

A list of qualifiers.

Contains a comma-separated list of qualifier aliases for the certificate, for example QCP-n-qscd,QCWithSSCD.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_self_signed property (ASiCVerifier Struct)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

fn cert_self_signed(&self , CertIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

bool

cert_serial_number property (ASiCVerifier Struct)

Returns the certificate's serial number.

Syntax

fn cert_serial_number(&self , CertIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the certificate's serial number.

The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

Vec

cert_sig_algorithm property (ASiCVerifier Struct)

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

fn cert_sig_algorithm(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_source property (ASiCVerifier Struct)

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

Syntax

fn cert_source(&self , CertIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // Unknown
1   // Signature
2   // Document
3   // User
4   // Local
5   // Online

Default Value

Remarks

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

i32

cert_subject property (ASiCVerifier Struct)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

fn cert_subject(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via cert_subject_rdn.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_subject_alternative_name property (ASiCVerifier Struct)

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Syntax

fn cert_subject_alternative_name(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Subject alternative names are used to provide additional names that are impractical to store in the main cert_subject_rdn field. For example, it is often used to store all the domain names that a TLS certificate is authorized to protect.

The alternative names are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the element separator.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_subject_key_id property (ASiCVerifier Struct)

Contains a unique identifier of the certificate's cryptographic key.

Syntax

fn cert_subject_key_id(&self , CertIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Contains a unique identifier of the certificate's cryptographic key.

Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.

The cert_subject_key_id and cert_ca_key_id properties of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

Vec

cert_subject_rdn property (ASiCVerifier Struct)

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Syntax

fn cert_subject_rdn(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_valid property (ASiCVerifier Struct)

Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.

Syntax

fn cert_valid(&self , CertIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

bool

cert_valid_from property (ASiCVerifier Struct)

The time point at which the certificate becomes valid, in UTC.

Syntax

fn cert_valid_from(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The time point at which the certificate becomes valid, in UTC.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

cert_valid_to property (ASiCVerifier Struct)

The time point at which the certificate expires, in UTC.

Syntax

fn cert_valid_to(&self , CertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The time point at which the certificate expires, in UTC.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only.

Data Type

String

check_trusted_lists property (ASiCVerifier Struct)

Specifies whether the struct should attempt to validate chain trust via a known Trusted List.

Syntax

fn check_trusted_lists(&self ) -> Result<bool, SecureBlackboxError> 
fn set_check_trusted_lists(&self, value : bool) ->  Option<SecureBlackboxError>

Default Value

false

Remarks

Set this property to true to enable the component to validate chain trust against an internal list of known Trusted Lists (such as EUTL).

Data Type

bool

crl_count property (ASiCVerifier Struct)

The number of records in the CRL arrays.

Syntax

fn crl_count(&self ) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

crl_bytes
crlca_key_id
crl_entry_count
crl_handle
crl_issuer
crl_issuer_rdn
crl_location
crl_next_update
crl_sig_algorithm
crl_source
crltbs
crl_this_update

The array indices start at 0 and end at crl_count - 1.

This property is read-only.

Data Type

i32

crl_bytes property (ASiCVerifier Struct)

Returns the raw CRL data in DER format.

Syntax

fn crl_bytes(&self , CRLIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the raw CRL data in DER format.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only.

Data Type

Vec

crlca_key_id property (ASiCVerifier Struct)

A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.

Syntax

fn crlca_key_id(&self , CRLIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only.

Data Type

Vec

crl_entry_count property (ASiCVerifier Struct)

Returns the number of certificate status entries in the CRL.

Syntax

fn crl_entry_count(&self , CRLIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

Returns the number of certificate status entries in the CRL.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only.

Data Type

i32

crl_handle property (ASiCVerifier Struct)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

fn crl_handle(&self , CRLIndex : i32) -> Result<i64, SecureBlackboxError>

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only.

Data Type

i64

crl_issuer property (ASiCVerifier Struct)

The common name of the CRL issuer (CA), typically a company name.

Syntax

fn crl_issuer(&self , CRLIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The common name of the CRL issuer (CA), typically a company name.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only.

Data Type

String

crl_issuer_rdn property (ASiCVerifier Struct)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

Syntax

fn crl_issuer_rdn(&self , CRLIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only.

Data Type

String

crl_location property (ASiCVerifier Struct)

The URL that the CRL was downloaded from.

Syntax

fn crl_location(&self , CRLIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The URL that the CRL was downloaded from.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only.

Data Type

String

crl_next_update property (ASiCVerifier Struct)

The planned time and date of the next version of this CRL to be published.

Syntax

fn crl_next_update(&self , CRLIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The planned time and date of the next version of this CRL to be published.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only.

Data Type

String

crl_sig_algorithm property (ASiCVerifier Struct)

The public key algorithm that was used by the CA to sign this CRL.

Syntax

fn crl_sig_algorithm(&self , CRLIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

"0"

Remarks

The public key algorithm that was used by the CA to sign this CRL.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only.

Data Type

String

crl_source property (ASiCVerifier Struct)

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

Syntax

fn crl_source(&self , CRLIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // Unknown
1   // Signature
2   // Document
3   // User
4   // Local
5   // Online

Default Value

Remarks

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only.

Data Type

i32

crltbs property (ASiCVerifier Struct)

The to-be-signed part of the CRL (the CRL without the signature part).

Syntax

fn crltbs(&self , CRLIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

The to-be-signed part of the CRL (the CRL without the signature part).

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only.

Data Type

Vec

crl_this_update property (ASiCVerifier Struct)

The date and time at which this version of the CRL was published.

Syntax

fn crl_this_update(&self , CRLIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The date and time at which this version of the CRL was published.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only.

Data Type

String

extraction_mode property (ASiCVerifier Struct)

Specifies which entries should be extracted from the container upon verification.

Syntax

fn extraction_mode(&self ) -> Result<i32, SecureBlackboxError> 
fn set_extraction_mode(&self, value : i32) ->  Option<SecureBlackboxError>

Possible Values

0   // None
1   // All
2   // Signed
3   // SignedAndValid

Default Value

Remarks

Use this property to choose entries that should be extracted in the verify method. Choose between extracting all files, signed-only, signed and with verified signature, and none at all (verify-only mode).


aemNone	`0`
aemAll	`1`
aemSigned	`2`
aemSignedAndValid	`3`

Data Type

i32

file_count property (ASiCVerifier Struct)

The number of records in the File arrays.

Syntax

fn file_count(&self ) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

file_action
file_attributes
file_compressed_size
file_data_source
file_directory
file_encryption_algorithm
file_encryption_key_length
file_encryption_type
file_folder
file_local_path
file_m_time
file_name
file_new_file
file_path
file_signature_count
file_signed
file_size

The array indices start at 0 and end at file_count - 1.

This property is read-only.

Data Type

i32

file_action property (ASiCVerifier Struct)

This property contains the action to apply to the file.

Syntax

fn file_action(&self , FileIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // Add
1   // Keep
2   // Update
3   // Delete
4   // Extract
5   // Skip

Default Value

Remarks

This property contains the action to apply to the file.

Use this property to control the action that should be applied to the file during the compression or extraction. The following actions are supported:


atAdd (0)	Add the file to the archive.
atKeep (1)	Keep the existing file in the archive.
atUpdate (2)	Update the archived file with a fresher copy.
atDelete (3)	Delete the file from the archive.
atExtract (4)	Extract the file (extraction only).
atSkip (5)	Skip file extraction (extraction only).

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

i32

file_attributes property (ASiCVerifier Struct)

This property provides access to file attributes.

Syntax

fn file_attributes(&self , FileIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

This property provides access to file attributes.

ZIP archives support the provision of Windows (or DOS, as it is called historically) or Unix file attributes. Use this property to provide access to the attributes or to read them out of an existing archive.

Use "dos:" or "unix:" prefixes to indicate what kind of attributes you need to include, as follows:

Writer.Files[0].Attributes = "unix:-rwxr-xr-x"; Writer.Files[1].Attributes = "unix:-r--r--r--"; Writer.Files[2].Attributes = "dos:readonly"; Writer.Files[3].Attributes = "dos:readonly;hidden"; // supported values: readonly, hidden, system, volumeLabel, directory, archive

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

String

file_compressed_size property (ASiCVerifier Struct)

This property contains the size of the file after compression.

Syntax

fn file_compressed_size(&self , FileIndex : i32) -> Result<i64, SecureBlackboxError>

Default Value

Remarks

This property contains the size of the file after compression.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

i64

file_data_source property (ASiCVerifier Struct)

This property contains the type of data source for this entry.

Syntax

fn file_data_source(&self , FileIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // File
1   // Stream
2   // Buffer

Default Value

Remarks

This property contains the type of data source for this entry.

Use this property to control the data source for this entry.


fdsFile (0)	The data for this entry should be taken from the file provided by file_local_path.
fdsStream (1)	Data are going to be provided on-the-fly through the FileStream property.
fdsBuffer (2)	Data are going to be provided on-the-fly through the FileData property.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

i32

file_directory property (ASiCVerifier Struct)

This property tells if the entry is a directory or a regular file.

Syntax

fn file_directory(&self , FileIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

This property tells if the entry is a directory or a regular file.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

bool

file_encryption_algorithm property (ASiCVerifier Struct)

This property returns the symmetric algorithm that was used to encrypt the file.

Syntax

fn file_encryption_algorithm(&self , FileIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

This property returns the symmetric algorithm that was used to encrypt the file.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

String

file_encryption_key_length property (ASiCVerifier Struct)

This property returns the length, in bits, of the encryption key.

Syntax

fn file_encryption_key_length(&self , FileIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

This property returns the length, in bits, of the encryption key.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

i32

file_encryption_type property (ASiCVerifier Struct)

This property contains the type of encryption applied to the file.

Syntax

fn file_encryption_type(&self , FileIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // Default
1   // NoEncryption
2   // Generic
3   // WinZip
4   // Strong

Default Value

Remarks

This property contains the type of encryption applied to the file.

Use this property to find out what kind of encryption was applied to the file.


aetDefault (0)	Default encryption (not used for already encrypted files)
aetNoEncryption (1)	No encryption
aetGeneric (2)	Standard ZIP encryption
aetWinZip (3)	WinZIP-based encryption
aetStrong (4)	Strong encryption

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

i32

file_name property (ASiCVerifier Struct)

This property specifies the original name of the compressed file or folder.

Syntax

fn file_name(&self , FileIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

This property specifies the original name of the compressed file or folder.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

String

file_folder property (ASiCVerifier Struct)

This property includes the containing folder of the entry.

Syntax

fn file_folder(&self , FileIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

This property includes the containing folder of the entry.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

String

file_local_path property (ASiCVerifier Struct)

This property contains the local path associated with this entry.

Syntax

fn file_local_path(&self , FileIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

This property contains the local path associated with this entry.

It typically specifies the source path that the data should be taken from, or the destination it should be extracted to.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

String

file_m_time property (ASiCVerifier Struct)

This property contains the entry's last modification time.

Syntax

fn file_m_time(&self , FileIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

This property contains the entry's last modification time.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

String

file_new_file property (ASiCVerifier Struct)

This property indicates whether the entry corresponds to a file to be added to the archive.

Syntax

fn file_new_file(&self , FileIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

This property indicates whether the entry corresponds to a file to be added to the archive.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

bool

file_path property (ASiCVerifier Struct)

This property contains the full internal path of the archived entry.

Syntax

fn file_path(&self , FileIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

This property contains the full internal path of the archived entry.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

String

file_signature_count property (ASiCVerifier Struct)

This property includes the number of signatures covering the entry.

Syntax

fn file_signature_count(&self , FileIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

This property includes the number of signatures covering the entry.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

i32

file_signed property (ASiCVerifier Struct)

This property indicates whether the entry is signed.

Syntax

fn file_signed(&self , FileIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

This property indicates whether the entry is signed.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

bool

file_size property (ASiCVerifier Struct)

This property specifies the size of the file before compression.

Syntax

fn file_size(&self , FileIndex : i32) -> Result<i64, SecureBlackboxError>

Default Value

Remarks

This property specifies the size of the file before compression.

The FileIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FileCount property.

This property is read-only.

Data Type

i64

fips_mode property (ASiCVerifier Struct)

Reserved.

Syntax

fn fips_mode(&self ) -> Result<bool, SecureBlackboxError> 
fn set_fips_mode(&self, value : bool) ->  Option<SecureBlackboxError>

Default Value

false

Remarks

This property is reserved for future use.

Data Type

bool

ignore_chain_validation_errors property (ASiCVerifier Struct)

Makes the struct tolerant to chain validation errors.

Syntax

fn ignore_chain_validation_errors(&self ) -> Result<bool, SecureBlackboxError> 
fn set_ignore_chain_validation_errors(&self, value : bool) ->  Option<SecureBlackboxError>

Default Value

false

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

Data Type

bool

input_bytes property (ASiCVerifier Struct)

Use this property to pass the input to struct in byte array form.

Syntax

fn input_bytes(&self ) -> Result<Vec<u8>, SecureBlackboxError> 
fn set_input_bytes(&self, value : Vec<u8>) ->  Option<SecureBlackboxError> 
fn set_input_bytes_ref(&self, value : &[u8]) ->  Option<SecureBlackboxError>

Remarks

Assign a byte array containing the data to be processed to this property.

Data Type

Vec

input_file property (ASiCVerifier Struct)

A path to the ASiC container to process.

Syntax

fn input_file(&self ) -> Result<String, SecureBlackboxError> 
fn set_input_file(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_input_file_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Use this property to provide a path to the signature container. Use input_stream to provide the container from memory rather than a disk file.

Data Type

String

known_cert_count property (ASiCVerifier Struct)

The number of records in the KnownCert arrays.

Syntax

fn known_cert_count(&self ) -> Result<i32, SecureBlackboxError> 
fn set_known_cert_count(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

known_cert_bytes
known_cert_handle

The array indices start at 0 and end at known_cert_count - 1.

Data Type

i32

known_cert_bytes property (ASiCVerifier Struct)

Returns the raw certificate data in DER format.

Syntax

fn known_cert_bytes(&self , KnownCertIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the raw certificate data in DER format.

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is read-only.

Data Type

Vec

known_cert_handle property (ASiCVerifier Struct)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

fn known_cert_handle(&self , KnownCertIndex : i32) -> Result<i64, SecureBlackboxError> 
fn set_known_cert_handle(&self, KnownCertIndex : i32, value : i64) ->  Option<SecureBlackboxError>

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

Data Type

i64

known_crl_count property (ASiCVerifier Struct)

The number of records in the KnownCRL arrays.

Syntax

fn known_crl_count(&self ) -> Result<i32, SecureBlackboxError> 
fn set_known_crl_count(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

known_crl_bytes
known_crl_handle

The array indices start at 0 and end at known_crl_count - 1.

Data Type

i32

known_crl_bytes property (ASiCVerifier Struct)

Returns the raw CRL data in DER format.

Syntax

fn known_crl_bytes(&self , KnownCRLIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the raw CRL data in DER format.

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is read-only.

Data Type

Vec

known_crl_handle property (ASiCVerifier Struct)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

fn known_crl_handle(&self , KnownCRLIndex : i32) -> Result<i64, SecureBlackboxError> 
fn set_known_crl_handle(&self, KnownCRLIndex : i32, value : i64) ->  Option<SecureBlackboxError>

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

Data Type

i64

known_ocsp_count property (ASiCVerifier Struct)

The number of records in the KnownOCSP arrays.

Syntax

fn known_ocsp_count(&self ) -> Result<i32, SecureBlackboxError> 
fn set_known_ocsp_count(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

known_ocsp_bytes
known_ocsp_handle

The array indices start at 0 and end at known_ocsp_count - 1.

Data Type

i32

known_ocsp_bytes property (ASiCVerifier Struct)

A buffer containing the raw OCSP response data.

Syntax

fn known_ocsp_bytes(&self , KnownOCSPIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

A buffer containing the raw OCSP response data.

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is read-only.

Data Type

Vec

known_ocsp_handle property (ASiCVerifier Struct)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

fn known_ocsp_handle(&self , KnownOCSPIndex : i32) -> Result<i64, SecureBlackboxError> 
fn set_known_ocsp_handle(&self, KnownOCSPIndex : i32, value : i64) ->  Option<SecureBlackboxError>

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

Data Type

i64

ocsp_count property (ASiCVerifier Struct)

The number of records in the OCSP arrays.

Syntax

fn ocsp_count(&self ) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

ocsp_bytes
ocsp_entry_count
ocsp_handle
ocsp_issuer
ocsp_issuer_rdn
ocsp_location
ocsp_produced_at
ocsp_sig_algorithm
ocsp_source

The array indices start at 0 and end at ocsp_count - 1.

This property is read-only.

Data Type

i32

ocsp_bytes property (ASiCVerifier Struct)

A buffer containing the raw OCSP response data.

Syntax

fn ocsp_bytes(&self , OCSPIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

A buffer containing the raw OCSP response data.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only.

Data Type

Vec

ocsp_entry_count property (ASiCVerifier Struct)

The number of SingleResponse elements contained in this OCSP response.

Syntax

fn ocsp_entry_count(&self , OCSPIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only.

Data Type

i32

ocsp_handle property (ASiCVerifier Struct)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

fn ocsp_handle(&self , OCSPIndex : i32) -> Result<i64, SecureBlackboxError>

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only.

Data Type

i64

ocsp_issuer property (ASiCVerifier Struct)

Indicates the issuer of this response (a CA or its authorized representative).

Syntax

fn ocsp_issuer(&self , OCSPIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Indicates the issuer of this response (a CA or its authorized representative).

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only.

Data Type

String

ocsp_issuer_rdn property (ASiCVerifier Struct)

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

Syntax

fn ocsp_issuer_rdn(&self , OCSPIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only.

Data Type

String

ocsp_location property (ASiCVerifier Struct)

The location of the OCSP responder.

Syntax

fn ocsp_location(&self , OCSPIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The location of the OCSP responder.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only.

Data Type

String

ocsp_produced_at property (ASiCVerifier Struct)

Specifies the time when the response was produced, in UTC.

Syntax

fn ocsp_produced_at(&self , OCSPIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Specifies the time when the response was produced, in UTC.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only.

Data Type

String

ocsp_sig_algorithm property (ASiCVerifier Struct)

The public key algorithm that was used by the CA to sign this OCSP response.

Syntax

fn ocsp_sig_algorithm(&self , OCSPIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

"0"

Remarks

The public key algorithm that was used by the CA to sign this OCSP response.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only.

Data Type

String

ocsp_source property (ASiCVerifier Struct)

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

Syntax

fn ocsp_source(&self , OCSPIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // Unknown
1   // Signature
2   // Document
3   // User
4   // Local
5   // Online

Default Value

Remarks

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only.

Data Type

i32

offline_mode property (ASiCVerifier Struct)

Switches the struct to offline mode.

Syntax

fn offline_mode(&self ) -> Result<bool, SecureBlackboxError> 
fn set_offline_mode(&self, value : bool) ->  Option<SecureBlackboxError>

Default Value

false

Remarks

When working in offline mode, the struct restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via known_certificates, known_crls, and other related properties.

Data Type

bool

output_bytes property (ASiCVerifier Struct)

Use this property to read the output the struct object has produced.

Syntax

fn output_bytes(&self ) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the output_file and output_stream properties had not been assigned.

This property is read-only.

Data Type

Vec

output_file property (ASiCVerifier Struct)

The file where the processed data will be saved.

Syntax

fn output_file(&self ) -> Result<String, SecureBlackboxError> 
fn set_output_file(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_output_file_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Provides a path to the file where the struct should save the updated container.

Data Type

String

output_path property (ASiCVerifier Struct)

A local path to extract the files to.

Syntax

fn output_path(&self ) -> Result<String, SecureBlackboxError> 
fn set_output_path(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_output_path_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Assign this property with a path where the extracted files (selected according to extraction_mode criteria) are to be saved.

Data Type

String

profile property (ASiCVerifier Struct)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

fn profile(&self ) -> Result<String, SecureBlackboxError> 
fn set_profile(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_profile_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Data Type

String

proxy_address property (ASiCVerifier Struct)

The IP address of the proxy server.

Syntax

fn proxy_address(&self ) -> Result<String, SecureBlackboxError> 
fn set_proxy_address(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_proxy_address_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

The IP address of the proxy server.

Data Type

String

proxy_authentication property (ASiCVerifier Struct)

The authentication type used by the proxy server.

Syntax

fn proxy_authentication(&self ) -> Result<i32, SecureBlackboxError> 
fn set_proxy_authentication(&self, value : i32) ->  Option<SecureBlackboxError>

Possible Values

0   // NoAuthentication
1   // Basic
2   // Digest
3   // NTLM

Default Value

Remarks

The authentication type used by the proxy server.


patNoAuthentication	`0`
patBasic	`1`
patDigest	`2`
patNTLM	`3`

Data Type

i32

proxy_password property (ASiCVerifier Struct)

The password to authenticate to the proxy server.

Syntax

fn proxy_password(&self ) -> Result<String, SecureBlackboxError> 
fn set_proxy_password(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_proxy_password_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

The password to authenticate to the proxy server.

Data Type

String

proxy_port property (ASiCVerifier Struct)

The port on the proxy server to connect to.

Syntax

fn proxy_port(&self ) -> Result<i32, SecureBlackboxError> 
fn set_proxy_port(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

The port on the proxy server to connect to.

Data Type

i32

proxy_type property (ASiCVerifier Struct)

The type of the proxy server.

Syntax

fn proxy_type(&self ) -> Result<i32, SecureBlackboxError> 
fn set_proxy_type(&self, value : i32) ->  Option<SecureBlackboxError>

Possible Values

0   // None
1   // Socks4
2   // Socks5
3   // WebTunnel
4   // HTTP

Default Value

Remarks

The type of the proxy server.


cptNone	`0`
cptSocks4	`1`
cptSocks5	`2`
cptWebTunnel	`3`
cptHTTP	`4`

Data Type

i32

proxy_request_headers property (ASiCVerifier Struct)

Contains HTTP request headers for WebTunnel and HTTP proxy.

Syntax

fn proxy_request_headers(&self ) -> Result<String, SecureBlackboxError> 
fn set_proxy_request_headers(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_proxy_request_headers_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

Data Type

String

proxy_response_body property (ASiCVerifier Struct)

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Syntax

fn proxy_response_body(&self ) -> Result<String, SecureBlackboxError> 
fn set_proxy_response_body(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_proxy_response_body_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Data Type

String

proxy_response_headers property (ASiCVerifier Struct)

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Syntax

fn proxy_response_headers(&self ) -> Result<String, SecureBlackboxError> 
fn set_proxy_response_headers(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_proxy_response_headers_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Data Type

String

proxy_use_ipv6 property (ASiCVerifier Struct)

Specifies whether IPv6 should be used when connecting through the proxy.

Syntax

fn proxy_use_ipv6(&self ) -> Result<bool, SecureBlackboxError> 
fn set_proxy_use_ipv6(&self, value : bool) ->  Option<SecureBlackboxError>

Default Value

false

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

Data Type

bool

proxy_username property (ASiCVerifier Struct)

Specifies the username credential for proxy authentication.

Syntax

fn proxy_username(&self ) -> Result<String, SecureBlackboxError> 
fn set_proxy_username(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_proxy_username_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Specifies the username credential for proxy authentication.

Data Type

String

revocation_check property (ASiCVerifier Struct)

Specifies the kind(s) of revocation check to perform for all chain certificates.

Syntax

fn revocation_check(&self ) -> Result<i32, SecureBlackboxError> 
fn set_revocation_check(&self, value : i32) ->  Option<SecureBlackboxError>

Possible Values

0   // None
1   // Auto
2   // AllCRL
3   // AllOCSP
4   // AllCRLAndOCSP
5   // AnyCRL
6   // AnyOCSP
7   // AnyCRLOrOCSP
8   // AnyOCSPOrCRL

Default Value

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.


crcNone	`0`	No revocation checking.
crcAuto	`1`	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL	`2`	All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP	`3`	All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP	`4`	All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL	`5`	All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP	`6`	All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP	`7`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL	`8`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

NOTE: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

NOTE: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

Data Type

i32

signature_count property (ASiCVerifier Struct)

The number of records in the Signature arrays.

Syntax

fn signature_count(&self ) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

signature_bytes
signature_chain_validation_details
signature_chain_validation_result
signature_claimed_signing_time
signature_compatibility_errors
signature_contains_long_term_info
signature_content_type
signature_entity_label
signature_file_name
signature_handle
signature_hash_algorithm
signature_issuer_rdn
signature_level
signature_policy_hash
signature_policy_hash_algorithm
signature_policy_id
signature_policy_uri
signature_serial_number
signature_signed_files
signature_subject_key_id
signature_subject_rdn
signature_timestamped
signature_type
signature_validated_signing_time
signature_validation_log
signature_validation_result

The array indices start at 0 and end at signature_count - 1.

This property is read-only.

Data Type

i32

signature_chain_validation_details property (ASiCVerifier Struct)

The details of a certificate chain validation outcome.

Syntax

fn signature_chain_validation_details(&self , SignatureIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

i32

signature_chain_validation_result property (ASiCVerifier Struct)

The outcome of a certificate chain validation routine.

Syntax

fn signature_chain_validation_result(&self , SignatureIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // Valid
1   // ValidButUntrusted
2   // Invalid
3   // CantBeEstablished

Default Value

Remarks

The outcome of a certificate chain validation routine.

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

i32

signature_claimed_signing_time property (ASiCVerifier Struct)

Returns or sets signature's creation time.

Syntax

fn signature_claimed_signing_time(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Returns or sets signature's creation time.

Use this property to get or set the signature creation time from the signer's computer. The claimed time, unlike signature_validated_signing_time does not originate from a trusted TSA and may be forfeited or wrong.

The time is provided in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_compatibility_errors property (ASiCVerifier Struct)

Returns compatibility errors encountered during validation.

Syntax

fn signature_compatibility_errors(&self , SignatureIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

Returns compatibility errors encountered during validation.

Use this property to get specific compatibility errors encountered during validation. Unlike chain validation details, compatibility errors indicate violations by the signature of the assumed signature level/profile. For example, BES signatures are required to contain the signing time attribute. A prospective BES signature without such attribute will invoke a compatibility error.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

i32

signature_contains_long_term_info property (ASiCVerifier Struct)

Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).

Syntax

fn signature_contains_long_term_info(&self , SignatureIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

bool

signature_content_type property (ASiCVerifier Struct)

The signature content type.

Syntax

fn signature_content_type(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The signature content type.

Use this property to get or set the content type OID to be included with the signature.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_entity_label property (ASiCVerifier Struct)

Use this property to get the signature entity label.

Syntax

fn signature_entity_label(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Use this property to get the signature entity label.

This property returns a string label that uniquely identifies the signature. The label can be used to establish the signature target in the SignatureFound event or to select the signing chain via the SelectInfo method.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_file_name property (ASiCVerifier Struct)

The name of the ASiC signature file.

Syntax

fn signature_file_name(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The name of the ASiC signature file.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_handle property (ASiCVerifier Struct)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

fn signature_handle(&self , SignatureIndex : i32) -> Result<i64, SecureBlackboxError>

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

i64

signature_hash_algorithm property (ASiCVerifier Struct)

Set or returns the hash algorithm used to generate the signature.

Syntax

fn signature_hash_algorithm(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Set or returns the hash algorithm used to generate the signature.

Check this property after verifying the signature to get the hash algorithm which was used to calculate it. When creating a signed file, use this property to specify the hash algorithm to use.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_issuer_rdn property (ASiCVerifier Struct)

The Relative Distinguished Name of the signing certificate's issuer.

Syntax

fn signature_issuer_rdn(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The Relative Distinguished Name of the signing certificate's issuer.

A collection of information, in the form of [OID, Value] pairs, about the company that issued the signing certificate.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_level property (ASiCVerifier Struct)

Specifies the level according to which the inner AdES signature is to be composed CAdES and XAdES standards define a number of signature levels.

Syntax

fn signature_level(&self , SignatureIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // Unknown
1   // Generic
2   // BaselineB
3   // BaselineT
4   // BaselineLT
5   // BaselineLTA
6   // BES
7   // EPES
8   // T
9   // C
10   // X
11   // XType1
12   // XType2
13   // XL
14   // XLType1
15   // XLType2
16   // A
17   // ExtendedBES
18   // ExtendedEPES
19   // ExtendedT
20   // ExtendedC
21   // ExtendedX
22   // ExtendedXType1
23   // ExtendedXType2
24   // ExtendedXLong
25   // ExtendedXL
26   // ExtendedXLType1
27   // ExtendedXLType2
28   // ExtendedA
29   // BaselineExtendedB
30   // BaselineExtendedT
31   // BaselineExtendedLT
32   // BaselineExtendedLTA

Default Value

Remarks

Specifies the level according to which the inner AdES signature is to be composed

CAdES and XAdES standards define a number of signature levels. The main differences between levels are in the scope of validation information included to the signature. BES signatures only include the most necessary information (the signing chain), whereas XL and A signatures include the complete set.

The supported levels are:


aslUnknown	`0`	Unknown signature level
aslGeneric	`1`	Generic (this value applicable to XAdES signature only and corresponds to XML-DSIG signature)
aslBaselineB	`2`	Baseline B (B-B, basic) (for XAdES as defined in ETSI TS 103 171, for CAdES as defined in ETSI EN 319 122)
aslBaselineT	`3`	Baseline T (B-T, timestamped) (for XAdES as defined in ETSI TS 103 171, for CAdES as defined in ETSI EN 319 122)
aslBaselineLT	`4`	Baseline LT (B-LT, long-term) (for XAdES as defined in ETSI TS 103 171, for CAdES as defined in ETSI EN 319 122)
aslBaselineLTA	`5`	Baseline LTA (B-LTA, long-term with archived timestamp) (for XAdES as defined in ETSI TS 103 171, for CAdES as defined in ETSI EN 319 122)
aslBES	`6`	BES (Basic Electronic Signature)
aslEPES	`7`	EPES (Electronic Signature with an Explicit Policy)
aslT	`8`	T (Timestamped)
aslC	`9`	C (T with revocation references)
aslX	`10`	X (C with SigAndRefs timestamp or RefsOnly timestamp) (this value applicable to XAdES signature only)
aslXType1	`11`	X Type 1 (C with an ES-C timestamp) (this value applicable to CAdES signature only)
aslXType2	`12`	X Type 2 (C with a CertsAndCRLs timestamp) (this value applicable to CAdES signature only)
aslXL	`13`	X-L (X with revocation values) (this value applicable to XAdES signature only)
aslXLType1	`14`	X-L Type 1 (C with revocation values and an ES-C timestamp) (this value applicable to CAdES signature only)
aslXLType2	`15`	X-L Type 2 (C with revocation values and a CertsAndCRLs timestamp) (this value applicable to CAdES signature only)
aslA	`16`	A (archived)
aslExtendedBES	`17`	Extended BES
aslExtendedEPES	`18`	Extended EPES
aslExtendedT	`19`	Extended T
aslExtendedC	`20`	Extended C
aslExtendedX	`21`	Extended X (this value applicable to XAdES signature only)
aslExtendedXType1	`22`	Extended X (type 1) (this value applicable to CAdES signature only)
aslExtendedXType2	`23`	Extended X (type 2) (this value applicable to CAdES signature only)
aslExtendedXLong	`24`	Extended X-Long (this value applicable to XAdES signature only)
aslExtendedXL	`25`	Extended X-L (this value applicable to XAdES signature only)
aslExtendedXLType1	`26`	Extended XL (type 1) (this value applicable to CAdES signature only)
aslExtendedXLType2	`27`	Extended XL (type 2) (this value applicable to CAdES signature only)
aslExtendedA	`28`	Extended A
aslBaselineExtendedB	`29`	Baseline B (B-B, basic) according to ETSI EN 319 132 (this value applicable to XAdES signature only)
aslBaselineExtendedT	`30`	Baseline T (B-T, timestamped) according to ETSI EN 319 132 (this value applicable to XAdES signature only)
aslBaselineExtendedLT	`31`	Baseline LT (B-LT, long-term) according to ETSI EN 319 132 (this value applicable to XAdES signature only)
aslBaselineExtendedLTA	`32`	Baseline LTA (B-LTA, long-term with archived timestamp) as defined in ETSI EN 319 132 (this value applicable to XAdES signature only)

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

i32

signature_policy_hash property (ASiCVerifier Struct)

The signature policy hash value.

Syntax

fn signature_policy_hash(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The signature policy hash value.

Use this property to get the signature policy hash from EPES signatures

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_policy_hash_algorithm property (ASiCVerifier Struct)

The algorithm that was used to calculate the signature policy hash Use this property to get or set the hash algorithm used to calculate the signature policy hash.

Syntax

fn signature_policy_hash_algorithm(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The algorithm that was used to calculate the signature policy hash

Use this property to get or set the hash algorithm used to calculate the signature policy hash. Read the actual hash value from signature_policy_hash.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_policy_id property (ASiCVerifier Struct)

The policy ID that was included or to be included into the signature.

Syntax

fn signature_policy_id(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The policy ID that was included or to be included into the signature.

Use this property to retrieve the signature policy identifier from EPES signatures.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_policy_uri property (ASiCVerifier Struct)

The signature policy URI that was included in the signature.

Syntax

fn signature_policy_uri(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The signature policy URI that was included in the signature.

Use this property to set or retrieve the URI of the signature policy from EPES signatures.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_serial_number property (ASiCVerifier Struct)

The serial number of the signing certificate.

Syntax

fn signature_serial_number(&self , SignatureIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

The serial number of the signing certificate.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

Vec

signature_bytes property (ASiCVerifier Struct)

Returns the binary representation of the ASiC signature.

Syntax

fn signature_bytes(&self , SignatureIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the binary representation of the ASiC signature.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

Vec

signature_type property (ASiCVerifier Struct)

The type of the ASiC signature: CAdES, XAdES, timestamp, or unknown.

Syntax

fn signature_type(&self , SignatureIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // Unknown
1   // CAdES
2   // XAdES
3   // Timestamp

Default Value

Remarks

The type of the ASiC signature: CAdES, XAdES, timestamp, or unknown.


castUnknown	`0`
castCAdES	`1`
castXAdES	`2`
castTimestamp	`3`

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

i32

signature_validation_result property (ASiCVerifier Struct)

The outcome of the cryptographic signature validation.

Syntax

fn signature_validation_result(&self , SignatureIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // Valid
1   // Unknown
2   // Corrupted
3   // SignerNotFound
4   // Failure
5   // ReferenceCorrupted

Default Value

Remarks

The outcome of the cryptographic signature validation.

The following signature validity values are supported:


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure
svtReferenceCorrupted	`5`	Reference corrupted (XML-based signatures only)

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

i32

signature_signed_files property (ASiCVerifier Struct)

Contains a comma-separated list of files that are covered by the signature.

Syntax

fn signature_signed_files(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Contains a comma-separated list of files that are covered by the signature.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_subject_key_id property (ASiCVerifier Struct)

Contains the subject key identifier of the signing certificate.

Syntax

fn signature_subject_key_id(&self , SignatureIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Contains the subject key identifier of the signing certificate.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented by a SHA-1 hash of the bit string of the subject public key.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

Vec

signature_subject_rdn property (ASiCVerifier Struct)

Contains the RDN of the owner of the signing certificate.

Syntax

fn signature_subject_rdn(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Contains the RDN of the owner of the signing certificate.

RDN is a number of OID=Value pairs declared in the certificate and providing the owner's details.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_timestamped property (ASiCVerifier Struct)

Use this property to establish whether the signature contains an embedded timestamp.

Syntax

fn signature_timestamped(&self , SignatureIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Use this property to establish whether the signature contains an embedded timestamp.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

bool

signature_validated_signing_time property (ASiCVerifier Struct)

Contains the certified signing time.

Syntax

fn signature_validated_signing_time(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Contains the certified signing time.

Use this property to obtain the signing time as certified by a timestamp from a trusted timestamping authority. This property is only non-empty if there was a valid timestamp included in the signature.

signature_claimed_signing_time returns a non-trusted signing time from the signer's computer.

Both times are in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

signature_validation_log property (ASiCVerifier Struct)

Contains the signing certificate's chain validation log.

Syntax

fn signature_validation_log(&self , SignatureIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Contains the signing certificate's chain validation log. This information may be very useful in investigating chain validation failures.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only.

Data Type

String

socket_dns_mode property (ASiCVerifier Struct)

Selects the DNS resolver to use: the struct's (secure) built-in one, or the one provided by the system.

Syntax

fn socket_dns_mode(&self ) -> Result<i32, SecureBlackboxError> 
fn set_socket_dns_mode(&self, value : i32) ->  Option<SecureBlackboxError>

Possible Values

0   // Auto
1   // Platform
2   // Own
3   // OwnSecure

Default Value

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.


dmAuto	`0`
dmPlatform	`1`
dmOwn	`2`
dmOwnSecure	`3`

Data Type

i32

socket_dns_port property (ASiCVerifier Struct)

Specifies the port number to be used for sending queries to the DNS server.

Syntax

fn socket_dns_port(&self ) -> Result<i32, SecureBlackboxError> 
fn set_socket_dns_port(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

Specifies the port number to be used for sending queries to the DNS server.

Data Type

i32

socket_dns_query_timeout property (ASiCVerifier Struct)

The timeout (in milliseconds) for each DNS query.

Syntax

fn socket_dns_query_timeout(&self ) -> Result<i32, SecureBlackboxError> 
fn set_socket_dns_query_timeout(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

Data Type

i32

socket_dns_servers property (ASiCVerifier Struct)

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Syntax

fn socket_dns_servers(&self ) -> Result<String, SecureBlackboxError> 
fn set_socket_dns_servers(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_socket_dns_servers_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Data Type

String

socket_dns_total_timeout property (ASiCVerifier Struct)

The timeout (in milliseconds) for the whole resolution process.

Syntax

fn socket_dns_total_timeout(&self ) -> Result<i32, SecureBlackboxError> 
fn set_socket_dns_total_timeout(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

Data Type

i32

socket_incoming_speed_limit property (ASiCVerifier Struct)

The maximum number of bytes to read from the socket, per second.

Syntax

fn socket_incoming_speed_limit(&self ) -> Result<i32, SecureBlackboxError> 
fn set_socket_incoming_speed_limit(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

The maximum number of bytes to read from the socket, per second.

Data Type

i32

socket_local_address property (ASiCVerifier Struct)

The local network interface to bind the socket to.

Syntax

fn socket_local_address(&self ) -> Result<String, SecureBlackboxError> 
fn set_socket_local_address(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_socket_local_address_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

The local network interface to bind the socket to.

Data Type

String

socket_local_port property (ASiCVerifier Struct)

The local port number to bind the socket to.

Syntax

fn socket_local_port(&self ) -> Result<i32, SecureBlackboxError> 
fn set_socket_local_port(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

The local port number to bind the socket to.

Data Type

i32

socket_outgoing_speed_limit property (ASiCVerifier Struct)

The maximum number of bytes to write to the socket, per second.

Syntax

fn socket_outgoing_speed_limit(&self ) -> Result<i32, SecureBlackboxError> 
fn set_socket_outgoing_speed_limit(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

The maximum number of bytes to write to the socket, per second.

Data Type

i32

socket_timeout property (ASiCVerifier Struct)

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

fn socket_timeout(&self ) -> Result<i32, SecureBlackboxError> 
fn set_socket_timeout(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

Data Type

i32

socket_use_ipv6 property (ASiCVerifier Struct)

Enables or disables IP protocol version 6.

Syntax

fn socket_use_ipv6(&self ) -> Result<bool, SecureBlackboxError> 
fn set_socket_use_ipv6(&self, value : bool) ->  Option<SecureBlackboxError>

Default Value

false

Remarks

Enables or disables IP protocol version 6.

Data Type

bool

timestamp_count property (ASiCVerifier Struct)

The number of records in the Timestamp arrays.

Syntax

fn timestamp_count(&self ) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

timestamp_accuracy
timestamp_bytes
timestamp_certificate_index
timestamp_chain_validation_details
timestamp_chain_validation_result
timestamp_contains_long_term_info
timestamp_entity_label
timestamp_hash_algorithm
timestamp_parent_entity
timestamp_serial_number
timestamp_time
timestamp_tsa_name
timestamp_type
timestamp_validation_log
timestamp_validation_result

The array indices start at 0 and end at timestamp_count - 1.

This property is read-only.

Data Type

i32

timestamp_accuracy property (ASiCVerifier Struct)

This property indicates the accuracy of the included time mark, in microseconds.

Syntax

fn timestamp_accuracy(&self , TimestampIndex : i32) -> Result<i64, SecureBlackboxError>

Default Value

Remarks

This field indicates the accuracy of the included time mark, in microseconds.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

i64

timestamp_bytes property (ASiCVerifier Struct)

Returns the raw timestamp data in DER format.

Syntax

fn timestamp_bytes(&self , TimestampIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the raw timestamp data in DER format.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

Vec

timestamp_certificate_index property (ASiCVerifier Struct)

Returns the index of the TSA certificate in the Certificates collection.

Syntax

fn timestamp_certificate_index(&self , TimestampIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

-1

Remarks

Returns the index of the TSA certificate in the Certificates collection.

Use this property to look up the TSA certificate in the Certificates collection.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

i32

timestamp_chain_validation_details property (ASiCVerifier Struct)

The details of a certificate chain validation outcome.

Syntax

fn timestamp_chain_validation_details(&self , TimestampIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

i32

timestamp_chain_validation_result property (ASiCVerifier Struct)

The outcome of a certificate chain validation routine.

Syntax

fn timestamp_chain_validation_result(&self , TimestampIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // Valid
1   // ValidButUntrusted
2   // Invalid
3   // CantBeEstablished

Default Value

Remarks

The outcome of a certificate chain validation routine.

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

i32

timestamp_contains_long_term_info property (ASiCVerifier Struct)

Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).

Syntax

fn timestamp_contains_long_term_info(&self , TimestampIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

bool

timestamp_entity_label property (ASiCVerifier Struct)

Use this property to get the timestamp entity label.

Syntax

fn timestamp_entity_label(&self , TimestampIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Use this property to get the timestamp entity label.

This property returns a string label that uniquely identifies the timestamp. The label can be used to establish the signature target in the SignatureFound event or to select the signing chain via the SelectInfo method.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

String

timestamp_hash_algorithm property (ASiCVerifier Struct)

Returns the timestamp's hash algorithm.

Syntax

fn timestamp_hash_algorithm(&self , TimestampIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Returns the timestamp's hash algorithm.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

String

timestamp_parent_entity property (ASiCVerifier Struct)

Use this property to get the label of the timestamp's parent entity.

Syntax

fn timestamp_parent_entity(&self , TimestampIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Use this property to get the label of the timestamp's parent entity.

This property references the EntityLabel of the object that the timestamp covers, typically a signature.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

String

timestamp_serial_number property (ASiCVerifier Struct)

Returns the timestamp's serial number.

Syntax

fn timestamp_serial_number(&self , TimestampIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the timestamp's serial number.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

Vec

timestamp_time property (ASiCVerifier Struct)

The time point incorporated into the timestamp.

Syntax

fn timestamp_time(&self , TimestampIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The time point incorporated into the timestamp.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

String

timestamp_type property (ASiCVerifier Struct)

Returns the type of the timestamp.

Syntax

fn timestamp_type(&self , TimestampIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

Returns the type of the timestamp.

Available options:


tstUnknown	`0`
tstLegacy	`1`	Supported by: Authenticode components
tstTrusted	`2`	Supported by: Authenticode components
tstGeneric	`3`	Supported by: CAdES components
tstESC	`4`	Supported by: CAdES components
tstContent	`5`	Supported by: CAdES components
tstCertsAndCRLs	`6`	Supported by: CAdES components
tstArchive	`7`	Archive timestamp. Supported by: ASiC, CAdES, JAdES, Office, SOAP, XAdES components
tstArchive2	`8`	Archive v2 timestamp. Supported by: ASiC, CAdES components
tstArchive3	`9`	Archive v3 timestamp. Supported by: ASiC, CAdES components
tstIndividualDataObjects	`10`	Individual data objects timestamp. Supported by: ASiC, Office, SOAP, XAdES components
tstAllDataObjects	`11`	All data objects timestamp. Supported by: ASiC, Office, SOAP, XAdES components
tstSignature	`12`	Signature timestamp. Supported by: ASiC, JAdES, Office, SOAP, XAdES components
tstRefsOnly	`13`	RefsOnly timestamp. Supported by: ASiC, JAdES, Office, SOAP, XAdES components
tstSigAndRefs	`14`	SigAndRefs timestamp. Supported by: ASiC, JAdES, Office, SOAP, XAdES components
tstSignedData	`15`	SignedData timestamp. Supported by: JAdES components
tstArchive141	`16`	Archive timestamp v1.4.1. Supported by: ASiC, Office, SOAP, XAdES components

Not all of the above timestamp types can be supported by a specific signature technology used (CAdES, PDF, XAdES).

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

i32

timestamp_tsa_name property (ASiCVerifier Struct)

This value uniquely identifies the Timestamp Authority (TSA).

Syntax

fn timestamp_tsa_name(&self , TimestampIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

This value uniquely identifies the Timestamp Authority (TSA).

This property provides information about the entity that manages the TSA.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

String

timestamp_validation_log property (ASiCVerifier Struct)

Contains the TSA certificate chain validation log.

Syntax

fn timestamp_validation_log(&self , TimestampIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Contains the TSA certificate chain validation log. This information is extremely useful if the timestamp validation fails.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

String

timestamp_validation_result property (ASiCVerifier Struct)

Contains the timestamp validation outcome.

Syntax

fn timestamp_validation_result(&self , TimestampIndex : i32) -> Result<i32, SecureBlackboxError>

Possible Values

0   // Valid
1   // Unknown
2   // Corrupted
3   // SignerNotFound
4   // Failure
5   // ReferenceCorrupted

Default Value

Remarks

Contains the timestamp validation outcome.

Use this property to check the result of the most recent timestamp validation.


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure
svtReferenceCorrupted	`5`	Reference corrupted (XML-based signatures only)

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only.

Data Type

i32

tls_client_cert_count property (ASiCVerifier Struct)

The number of records in the TLSClientCert arrays.

Syntax

fn tls_client_cert_count(&self ) -> Result<i32, SecureBlackboxError> 
fn set_tls_client_cert_count(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

tls_client_cert_bytes
tls_client_cert_handle

The array indices start at 0 and end at tls_client_cert_count - 1.

Data Type

i32

tls_client_cert_bytes property (ASiCVerifier Struct)

Returns the raw certificate data in DER format.

Syntax

fn tls_client_cert_bytes(&self , TLSClientCertIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the raw certificate data in DER format.

The TLSClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is read-only.

Data Type

Vec

tls_client_cert_handle property (ASiCVerifier Struct)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

fn tls_client_cert_handle(&self , TLSClientCertIndex : i32) -> Result<i64, SecureBlackboxError> 
fn set_tls_client_cert_handle(&self, TLSClientCertIndex : i32, value : i64) ->  Option<SecureBlackboxError>

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The TLSClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

Data Type

i64

tls_server_cert_count property (ASiCVerifier Struct)

The number of records in the TLSServerCert arrays.

Syntax

fn tls_server_cert_count(&self ) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

tls_server_cert_bytes
tls_server_cert_fingerprint
tls_server_cert_handle
tls_server_cert_issuer
tls_server_cert_issuer_rdn
tls_server_cert_key_algorithm
tls_server_cert_key_bits
tls_server_cert_key_usage
tls_server_cert_self_signed
tls_server_cert_serial_number
tls_server_cert_sig_algorithm
tls_server_cert_subject
tls_server_cert_subject_rdn
tls_server_cert_valid_from
tls_server_cert_valid_to

The array indices start at 0 and end at tls_server_cert_count - 1.

This property is read-only.

Data Type

i32

tls_server_cert_bytes property (ASiCVerifier Struct)

Returns the raw certificate data in DER format.

Syntax

fn tls_server_cert_bytes(&self , TLSServerCertIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the raw certificate data in DER format.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

Vec

tls_server_cert_fingerprint property (ASiCVerifier Struct)

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

fn tls_server_cert_fingerprint(&self , TLSServerCertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

String

tls_server_cert_handle property (ASiCVerifier Struct)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

fn tls_server_cert_handle(&self , TLSServerCertIndex : i32) -> Result<i64, SecureBlackboxError>

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

i64

tls_server_cert_issuer property (ASiCVerifier Struct)

The common name of the certificate issuer (CA), typically a company name.

Syntax

fn tls_server_cert_issuer(&self , TLSServerCertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via tls_issuer_rdn.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

String

tls_server_cert_issuer_rdn property (ASiCVerifier Struct)

A list of Property=Value pairs that uniquely identify the certificate issuer.

Syntax

fn tls_server_cert_issuer_rdn(&self , TLSServerCertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

String

tls_server_cert_key_algorithm property (ASiCVerifier Struct)

Specifies the public key algorithm of this certificate.

Syntax

fn tls_server_cert_key_algorithm(&self , TLSServerCertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`
SB_CERT_ALGORITHM_MLDSA_44	`id-ml-dsa-44`
SB_CERT_ALGORITHM_MLDSA_65	`id-ml-dsa-65`
SB_CERT_ALGORITHM_MLDSA_87	`id-ml-dsa-87`
SB_CERT_ALGORITHM_HASH_MLDSA_44_SHA512	`id-hash-ml-dsa-44-with-sha512`
SB_CERT_ALGORITHM_HASH_MLDSA_65_SHA512	`id-hash-ml-dsa-65-with-sha512`
SB_CERT_ALGORITHM_HASH_MLDSA_87_SHA512	`id-hash-ml-dsa-87-with-sha512`
SB_CERT_ALGORITHM_MLKEM_512	`id-ml-kem-512`
SB_CERT_ALGORITHM_MLKEM_768	`id-ml-kem-768`
SB_CERT_ALGORITHM_MLKEM_1024	`id-ml-kem-1024`

Use the tls_key_bits, tls_curve, and tls_public_key_bytes properties to get more details about the key the certificate contains.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

String

tls_server_cert_key_bits property (ASiCVerifier Struct)

Returns the length of the public key in bits.

Syntax

fn tls_server_cert_key_bits(&self , TLSServerCertIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the tls_public_key_bytes or tls_private_key_bytes property would typically contain auxiliary values, and therefore be longer.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

i32

tls_server_cert_key_usage property (ASiCVerifier Struct)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

fn tls_server_cert_key_usage(&self , TLSServerCertIndex : i32) -> Result<i32, SecureBlackboxError>

Default Value

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

Set this property before generating the certificate to propagate the key usage flags to the new certificate.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

i32

tls_server_cert_self_signed property (ASiCVerifier Struct)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

fn tls_server_cert_self_signed(&self , TLSServerCertIndex : i32) -> Result<bool, SecureBlackboxError>

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

bool

tls_server_cert_serial_number property (ASiCVerifier Struct)

Returns the certificate's serial number.

Syntax

fn tls_server_cert_serial_number(&self , TLSServerCertIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the certificate's serial number.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

Vec

tls_server_cert_sig_algorithm property (ASiCVerifier Struct)

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

fn tls_server_cert_sig_algorithm(&self , TLSServerCertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

String

tls_server_cert_subject property (ASiCVerifier Struct)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

fn tls_server_cert_subject(&self , TLSServerCertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via tls_subject_rdn.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

String

tls_server_cert_subject_rdn property (ASiCVerifier Struct)

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Syntax

fn tls_server_cert_subject_rdn(&self , TLSServerCertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

String

tls_server_cert_valid_from property (ASiCVerifier Struct)

The time point at which the certificate becomes valid, in UTC.

Syntax

fn tls_server_cert_valid_from(&self , TLSServerCertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The time point at which the certificate becomes valid, in UTC.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

String

tls_server_cert_valid_to property (ASiCVerifier Struct)

The time point at which the certificate expires, in UTC.

Syntax

fn tls_server_cert_valid_to(&self , TLSServerCertIndex : i32) -> Result<String, SecureBlackboxError>

Default Value

Remarks

The time point at which the certificate expires, in UTC.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only.

Data Type

String

tls_auto_validate_certificates property (ASiCVerifier Struct)

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

fn tls_auto_validate_certificates(&self ) -> Result<bool, SecureBlackboxError> 
fn set_tls_auto_validate_certificates(&self, value : bool) ->  Option<SecureBlackboxError>

Default Value

true

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Data Type

bool

tls_base_configuration property (ASiCVerifier Struct)

Selects the base configuration for the TLS settings.

Syntax

fn tls_base_configuration(&self ) -> Result<i32, SecureBlackboxError> 
fn set_tls_base_configuration(&self, value : i32) ->  Option<SecureBlackboxError>

Possible Values

0   // Default
1   // Compatible
2   // ComprehensiveInsecure
3   // HighlySecure

Default Value

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.


stpcDefault	`0`
stpcCompatible	`1`
stpcComprehensiveInsecure	`2`
stpcHighlySecure	`3`

Data Type

i32

tls_ciphersuites property (ASiCVerifier Struct)

A list of ciphersuites separated with commas or semicolons.

Syntax

fn tls_ciphersuites(&self ) -> Result<String, SecureBlackboxError> 
fn set_tls_ciphersuites(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_tls_ciphersuites_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by tls_base_configuration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

NULL_NULL_NULL
RSA_NULL_MD5
RSA_NULL_SHA
RSA_RC4_MD5
RSA_RC4_SHA
RSA_RC2_MD5
RSA_IDEA_MD5
RSA_IDEA_SHA
RSA_DES_MD5
RSA_DES_SHA
RSA_3DES_MD5
RSA_3DES_SHA
RSA_AES128_SHA
RSA_AES256_SHA
DH_DSS_DES_SHA
DH_DSS_3DES_SHA
DH_DSS_AES128_SHA
DH_DSS_AES256_SHA
DH_RSA_DES_SHA
DH_RSA_3DES_SHA
DH_RSA_AES128_SHA
DH_RSA_AES256_SHA
DHE_DSS_DES_SHA
DHE_DSS_3DES_SHA
DHE_DSS_AES128_SHA
DHE_DSS_AES256_SHA
DHE_RSA_DES_SHA
DHE_RSA_3DES_SHA
DHE_RSA_AES128_SHA
DHE_RSA_AES256_SHA
DH_ANON_RC4_MD5
DH_ANON_DES_SHA
DH_ANON_3DES_SHA
DH_ANON_AES128_SHA
DH_ANON_AES256_SHA
RSA_RC2_MD5_EXPORT
RSA_RC4_MD5_EXPORT
RSA_DES_SHA_EXPORT
DH_DSS_DES_SHA_EXPORT
DH_RSA_DES_SHA_EXPORT
DHE_DSS_DES_SHA_EXPORT
DHE_RSA_DES_SHA_EXPORT
DH_ANON_RC4_MD5_EXPORT
DH_ANON_DES_SHA_EXPORT
RSA_CAMELLIA128_SHA
DH_DSS_CAMELLIA128_SHA
DH_RSA_CAMELLIA128_SHA
DHE_DSS_CAMELLIA128_SHA
DHE_RSA_CAMELLIA128_SHA
DH_ANON_CAMELLIA128_SHA
RSA_CAMELLIA256_SHA
DH_DSS_CAMELLIA256_SHA
DH_RSA_CAMELLIA256_SHA
DHE_DSS_CAMELLIA256_SHA
DHE_RSA_CAMELLIA256_SHA
DH_ANON_CAMELLIA256_SHA
PSK_RC4_SHA
PSK_3DES_SHA
PSK_AES128_SHA
PSK_AES256_SHA
DHE_PSK_RC4_SHA
DHE_PSK_3DES_SHA
DHE_PSK_AES128_SHA
DHE_PSK_AES256_SHA
RSA_PSK_RC4_SHA
RSA_PSK_3DES_SHA
RSA_PSK_AES128_SHA
RSA_PSK_AES256_SHA
RSA_SEED_SHA
DH_DSS_SEED_SHA
DH_RSA_SEED_SHA
DHE_DSS_SEED_SHA
DHE_RSA_SEED_SHA
DH_ANON_SEED_SHA
SRP_SHA_3DES_SHA
SRP_SHA_RSA_3DES_SHA
SRP_SHA_DSS_3DES_SHA
SRP_SHA_AES128_SHA
SRP_SHA_RSA_AES128_SHA
SRP_SHA_DSS_AES128_SHA
SRP_SHA_AES256_SHA
SRP_SHA_RSA_AES256_SHA
SRP_SHA_DSS_AES256_SHA
ECDH_ECDSA_NULL_SHA
ECDH_ECDSA_RC4_SHA
ECDH_ECDSA_3DES_SHA
ECDH_ECDSA_AES128_SHA
ECDH_ECDSA_AES256_SHA
ECDHE_ECDSA_NULL_SHA
ECDHE_ECDSA_RC4_SHA
ECDHE_ECDSA_3DES_SHA
ECDHE_ECDSA_AES128_SHA
ECDHE_ECDSA_AES256_SHA
ECDH_RSA_NULL_SHA
ECDH_RSA_RC4_SHA
ECDH_RSA_3DES_SHA
ECDH_RSA_AES128_SHA
ECDH_RSA_AES256_SHA
ECDHE_RSA_NULL_SHA
ECDHE_RSA_RC4_SHA
ECDHE_RSA_3DES_SHA
ECDHE_RSA_AES128_SHA
ECDHE_RSA_AES256_SHA
ECDH_ANON_NULL_SHA
ECDH_ANON_RC4_SHA
ECDH_ANON_3DES_SHA
ECDH_ANON_AES128_SHA
ECDH_ANON_AES256_SHA
RSA_NULL_SHA256
RSA_AES128_SHA256
RSA_AES256_SHA256
DH_DSS_AES128_SHA256
DH_RSA_AES128_SHA256
DHE_DSS_AES128_SHA256
DHE_RSA_AES128_SHA256
DH_DSS_AES256_SHA256
DH_RSA_AES256_SHA256
DHE_DSS_AES256_SHA256
DHE_RSA_AES256_SHA256
DH_ANON_AES128_SHA256
DH_ANON_AES256_SHA256
RSA_AES128_GCM_SHA256
RSA_AES256_GCM_SHA384
DHE_RSA_AES128_GCM_SHA256
DHE_RSA_AES256_GCM_SHA384
DH_RSA_AES128_GCM_SHA256
DH_RSA_AES256_GCM_SHA384
DHE_DSS_AES128_GCM_SHA256
DHE_DSS_AES256_GCM_SHA384
DH_DSS_AES128_GCM_SHA256
DH_DSS_AES256_GCM_SHA384
DH_ANON_AES128_GCM_SHA256
DH_ANON_AES256_GCM_SHA384
ECDHE_ECDSA_AES128_SHA256
ECDHE_ECDSA_AES256_SHA384
ECDH_ECDSA_AES128_SHA256
ECDH_ECDSA_AES256_SHA384
ECDHE_RSA_AES128_SHA256
ECDHE_RSA_AES256_SHA384
ECDH_RSA_AES128_SHA256
ECDH_RSA_AES256_SHA384
ECDHE_ECDSA_AES128_GCM_SHA256
ECDHE_ECDSA_AES256_GCM_SHA384
ECDH_ECDSA_AES128_GCM_SHA256
ECDH_ECDSA_AES256_GCM_SHA384
ECDHE_RSA_AES128_GCM_SHA256
ECDHE_RSA_AES256_GCM_SHA384
ECDH_RSA_AES128_GCM_SHA256
ECDH_RSA_AES256_GCM_SHA384
PSK_AES128_GCM_SHA256
PSK_AES256_GCM_SHA384
DHE_PSK_AES128_GCM_SHA256
DHE_PSK_AES256_GCM_SHA384
RSA_PSK_AES128_GCM_SHA256
RSA_PSK_AES256_GCM_SHA384
PSK_AES128_SHA256
PSK_AES256_SHA384
PSK_NULL_SHA256
PSK_NULL_SHA384
DHE_PSK_AES128_SHA256
DHE_PSK_AES256_SHA384
DHE_PSK_NULL_SHA256
DHE_PSK_NULL_SHA384
RSA_PSK_AES128_SHA256
RSA_PSK_AES256_SHA384
RSA_PSK_NULL_SHA256
RSA_PSK_NULL_SHA384
RSA_CAMELLIA128_SHA256
DH_DSS_CAMELLIA128_SHA256
DH_RSA_CAMELLIA128_SHA256
DHE_DSS_CAMELLIA128_SHA256
DHE_RSA_CAMELLIA128_SHA256
DH_ANON_CAMELLIA128_SHA256
RSA_CAMELLIA256_SHA256
DH_DSS_CAMELLIA256_SHA256
DH_RSA_CAMELLIA256_SHA256
DHE_DSS_CAMELLIA256_SHA256
DHE_RSA_CAMELLIA256_SHA256
DH_ANON_CAMELLIA256_SHA256
ECDHE_ECDSA_CAMELLIA128_SHA256
ECDHE_ECDSA_CAMELLIA256_SHA384
ECDH_ECDSA_CAMELLIA128_SHA256
ECDH_ECDSA_CAMELLIA256_SHA384
ECDHE_RSA_CAMELLIA128_SHA256
ECDHE_RSA_CAMELLIA256_SHA384
ECDH_RSA_CAMELLIA128_SHA256
ECDH_RSA_CAMELLIA256_SHA384
RSA_CAMELLIA128_GCM_SHA256
RSA_CAMELLIA256_GCM_SHA384
DHE_RSA_CAMELLIA128_GCM_SHA256
DHE_RSA_CAMELLIA256_GCM_SHA384
DH_RSA_CAMELLIA128_GCM_SHA256
DH_RSA_CAMELLIA256_GCM_SHA384
DHE_DSS_CAMELLIA128_GCM_SHA256
DHE_DSS_CAMELLIA256_GCM_SHA384
DH_DSS_CAMELLIA128_GCM_SHA256
DH_DSS_CAMELLIA256_GCM_SHA384
DH_anon_CAMELLIA128_GCM_SHA256
DH_anon_CAMELLIA256_GCM_SHA384
ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
ECDH_ECDSA_CAMELLIA128_GCM_SHA256
ECDH_ECDSA_CAMELLIA256_GCM_SHA384
ECDHE_RSA_CAMELLIA128_GCM_SHA256
ECDHE_RSA_CAMELLIA256_GCM_SHA384
ECDH_RSA_CAMELLIA128_GCM_SHA256
ECDH_RSA_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_GCM_SHA256
PSK_CAMELLIA256_GCM_SHA384
DHE_PSK_CAMELLIA128_GCM_SHA256
DHE_PSK_CAMELLIA256_GCM_SHA384
RSA_PSK_CAMELLIA128_GCM_SHA256
RSA_PSK_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_SHA256
PSK_CAMELLIA256_SHA384
DHE_PSK_CAMELLIA128_SHA256
DHE_PSK_CAMELLIA256_SHA384
RSA_PSK_CAMELLIA128_SHA256
RSA_PSK_CAMELLIA256_SHA384
ECDHE_PSK_CAMELLIA128_SHA256
ECDHE_PSK_CAMELLIA256_SHA384
ECDHE_PSK_RC4_SHA
ECDHE_PSK_3DES_SHA
ECDHE_PSK_AES128_SHA
ECDHE_PSK_AES256_SHA
ECDHE_PSK_AES128_SHA256
ECDHE_PSK_AES256_SHA384
ECDHE_PSK_NULL_SHA
ECDHE_PSK_NULL_SHA256
ECDHE_PSK_NULL_SHA384
ECDHE_RSA_CHACHA20_POLY1305_SHA256
ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
DHE_RSA_CHACHA20_POLY1305_SHA256
PSK_CHACHA20_POLY1305_SHA256
ECDHE_PSK_CHACHA20_POLY1305_SHA256
DHE_PSK_CHACHA20_POLY1305_SHA256
RSA_PSK_CHACHA20_POLY1305_SHA256
AES128_GCM_SHA256
AES256_GCM_SHA384
CHACHA20_POLY1305_SHA256
AES128_CCM_SHA256
AES128_CCM8_SHA256

Data Type

String

tls_client_auth property (ASiCVerifier Struct)

Enables or disables certificate-based client authentication.

Syntax

fn tls_client_auth(&self ) -> Result<i32, SecureBlackboxError> 
fn set_tls_client_auth(&self, value : i32) ->  Option<SecureBlackboxError>

Possible Values

0   // NoAuth
1   // RequestCert
2   // RequireCert

Default Value

Remarks

Enables or disables certificate-based client authentication.

Set this property to true to tune up the client authentication type:


ccatNoAuth	`0`
ccatRequestCert	`1`
ccatRequireCert	`2`

Data Type

i32

tls_extensions property (ASiCVerifier Struct)

Provides access to TLS extensions.

Syntax

fn tls_extensions(&self ) -> Result<String, SecureBlackboxError> 
fn set_tls_extensions(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_tls_extensions_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Provides access to TLS extensions.

Data Type

String

tls_force_resume_if_destination_changes property (ASiCVerifier Struct)

Whether to force TLS session resumption when the destination address changes.

Syntax

fn tls_force_resume_if_destination_changes(&self ) -> Result<bool, SecureBlackboxError> 
fn set_tls_force_resume_if_destination_changes(&self, value : bool) ->  Option<SecureBlackboxError>

Default Value

false

Remarks

Whether to force TLS session resumption when the destination address changes.

Data Type

bool

tls_groups property (ASiCVerifier Struct)

Specifies a list of key exchange groups to attempt during the TLS key exchange.

Syntax

fn tls_groups(&self ) -> Result<String, SecureBlackboxError> 
fn set_tls_groups(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_tls_groups_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Specifies a list of key exchange groups to attempt during the TLS key exchange.

Keep this setting at its default value (empty string) to stick with the default list of key exchange groups. You can tweak the list by using '+' and '-' modifiers that are immediately followed by a group name or the all placeholder:

// Ensure the two x25519-based groups are enabled and the finite field DHE2048 is disabled client.TLSSettings.Groups = "+x25519mlkem768;+x25519;-ffdhe2048"; // Only enable the hybrid X25519/ML-KEM768 group client.TLSSettings.Groups = "-all;+x25519mlkem768";

The list of groups supported by the component is provided below. All the names are case-insensitive:

Elliptic curve-based groups:

SECT163K1
SECT163R1
SECT163R2
SECT193R1
SECT193R2
SECT233K1
SECT233R1
SECT239K1
SECT283K1
SECT283R1
SECT409K1
SECT409R1
SECT571K1
SECT571R1
SECP160K1
SECP160R1
SECP160R2
SECP192K1
SECP192R1
SECP224K1
SECP224R1
SECP256K1
SECP256R1
SECP384R1
SECP521R1
BRAINPOOLP256R1
BRAINPOOLP384R1
BRAINPOOLP512R1
X25519
X448

Finite field-based groups:

FFDHE2048
FFDHE3072
FFDHE4096
FFDHE6144
FFDHE8192

Post-Quantum and Hybrid groups:

MLKEM512
MLKEM768
MLKEM1024
SECP256R1MLKEM768
X25519MLKEM768
SECP384R1MLKEM1024

Note: this property was called ECCurves in SecureBlackbox 2024 and older.

Data Type

String

tls_pre_shared_identity property (ASiCVerifier Struct)

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

fn tls_pre_shared_identity(&self ) -> Result<String, SecureBlackboxError> 
fn set_tls_pre_shared_identity(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_tls_pre_shared_identity_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Data Type

String

tls_pre_shared_key property (ASiCVerifier Struct)

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

fn tls_pre_shared_key(&self ) -> Result<String, SecureBlackboxError> 
fn set_tls_pre_shared_key(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_tls_pre_shared_key_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Data Type

String

tls_pre_shared_key_ciphersuite property (ASiCVerifier Struct)

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

fn tls_pre_shared_key_ciphersuite(&self ) -> Result<String, SecureBlackboxError> 
fn set_tls_pre_shared_key_ciphersuite(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_tls_pre_shared_key_ciphersuite_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Data Type

String

tls_renegotiation_attack_prevention_mode property (ASiCVerifier Struct)

Selects the renegotiation attack prevention mechanism.

Syntax

fn tls_renegotiation_attack_prevention_mode(&self ) -> Result<i32, SecureBlackboxError> 
fn set_tls_renegotiation_attack_prevention_mode(&self, value : i32) ->  Option<SecureBlackboxError>

Possible Values

0   // Compatible
1   // Strict
2   // Auto

Default Value

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:


crapmCompatible	`0`	TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict	`1`	Renegotiation attack prevention is enabled and enforced.
crapmAuto	`2`	Automatically choose whether to enable or disable renegotiation attack prevention.

Data Type

i32

tls_revocation_check property (ASiCVerifier Struct)

Specifies the kind(s) of revocation check to perform.

Syntax

fn tls_revocation_check(&self ) -> Result<i32, SecureBlackboxError> 
fn set_tls_revocation_check(&self, value : i32) ->  Option<SecureBlackboxError>

Possible Values

0   // None
1   // Auto
2   // AllCRL
3   // AllOCSP
4   // AllCRLAndOCSP
5   // AnyCRL
6   // AnyOCSP
7   // AnyCRLOrOCSP
8   // AnyOCSPOrCRL

Default Value

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.


crcNone	`0`	No revocation checking.
crcAuto	`1`	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL	`2`	All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP	`3`	All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP	`4`	All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL	`5`	All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP	`6`	All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP	`7`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL	`8`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

NOTE: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

Data Type

i32

tls_ssl_options property (ASiCVerifier Struct)

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

fn tls_ssl_options(&self ) -> Result<i32, SecureBlackboxError> 
fn set_tls_ssl_options(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

Various SSL (TLS) protocol options, set of


cssloExpectShutdownMessage	`0x001`	Wait for the close-notify message when shutting down the connection
cssloOpenSSLDTLSWorkaround	`0x002`	(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions
cssloDisableKexLengthAlignment	`0x004`	Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.
cssloForceUseOfClientCertHashAlg	`0x008`	Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it.
cssloAutoAddServerNameExtension	`0x010`	Automatically add the server name extension when known
cssloAcceptTrustedSRPPrimesOnly	`0x020`	Accept trusted SRP primes only
cssloDisableSignatureAlgorithmsExtension	`0x040`	Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it.
cssloIntolerateHigherProtocolVersions	`0x080`	(server option) Do not allow fallback from TLS versions higher than currently enabled
cssloStickToPrefCertHashAlg	`0x100`	Stick to preferred certificate hash algorithms
cssloNoImplicitTLS12Fallback	`0x200`	Disable implicit TLS 1.3 to 1.2 fallbacks
cssloUseHandshakeBatches	`0x400`	Send the handshake message as large batches rather than individually

Data Type

i32

tls_mode property (ASiCVerifier Struct)

Specifies the TLS mode to use.

Syntax

fn tls_mode(&self ) -> Result<i32, SecureBlackboxError> 
fn set_tls_mode(&self, value : i32) ->  Option<SecureBlackboxError>

Possible Values

0   // Default
1   // NoTLS
2   // ExplicitTLS
3   // ImplicitTLS
4   // MixedTLS

Default Value

Remarks

Specifies the TLS mode to use.


smDefault	`0`
smNoTLS	`1`	Do not use TLS
smExplicitTLS	`2`	Connect to the server without any encryption and then request an SSL session.
smImplicitTLS	`3`	Connect to the specified port, and establish the SSL session at once.
smMixedTLS	`4`	Connect to the specified port, and establish the SSL session at once, but allow plain data.

Data Type

i32

tls_use_extended_master_secret property (ASiCVerifier Struct)

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Syntax

fn tls_use_extended_master_secret(&self ) -> Result<bool, SecureBlackboxError> 
fn set_tls_use_extended_master_secret(&self, value : bool) ->  Option<SecureBlackboxError>

Default Value

true

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Data Type

bool

tls_use_session_resumption property (ASiCVerifier Struct)

Enables or disables the TLS session resumption capability.

Syntax

fn tls_use_session_resumption(&self ) -> Result<bool, SecureBlackboxError> 
fn set_tls_use_session_resumption(&self, value : bool) ->  Option<SecureBlackboxError>

Default Value

false

Remarks

Enables or disables the TLS session resumption capability.

Data Type

bool

tls_versions property (ASiCVerifier Struct)

The SSL/TLS versions to enable by default.

Syntax

fn tls_versions(&self ) -> Result<i32, SecureBlackboxError> 
fn set_tls_versions(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

The SSL/TLS versions to enable by default.


csbSSL2	`0x01`	SSL 2
csbSSL3	`0x02`	SSL 3
csbTLS1	`0x04`	TLS 1.0
csbTLS11	`0x08`	TLS 1.1
csbTLS12	`0x10`	TLS 1.2
csbTLS13	`0x20`	TLS 1.3

Data Type

i32

trusted_cert_count property (ASiCVerifier Struct)

The number of records in the TrustedCert arrays.

Syntax

fn trusted_cert_count(&self ) -> Result<i32, SecureBlackboxError> 
fn set_trusted_cert_count(&self, value : i32) ->  Option<SecureBlackboxError>

Default Value

Remarks

This property controls the size of the following arrays:

trusted_cert_bytes
trusted_cert_handle

The array indices start at 0 and end at trusted_cert_count - 1.

Data Type

i32

trusted_cert_bytes property (ASiCVerifier Struct)

Returns the raw certificate data in DER format.

Syntax

fn trusted_cert_bytes(&self , TrustedCertIndex : i32) -> Result<Vec<u8>, SecureBlackboxError>

Remarks

Returns the raw certificate data in DER format.

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is read-only.

Data Type

Vec

trusted_cert_handle property (ASiCVerifier Struct)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

fn trusted_cert_handle(&self , TrustedCertIndex : i32) -> Result<i64, SecureBlackboxError> 
fn set_trusted_cert_handle(&self, TrustedCertIndex : i32, value : i64) ->  Option<SecureBlackboxError>

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

Data Type

i64

validation_moment property (ASiCVerifier Struct)

The time point at which signature validity is to be established.

Syntax

fn validation_moment(&self ) -> Result<String, SecureBlackboxError> 
fn set_validation_moment(&self, value : &str) ->  Option<SecureBlackboxError> 
fn set_validation_moment_ref(&self, value : &String) ->  Option<SecureBlackboxError>

Default Value

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

Data Type

String

close method (ASiCVerifier Struct)

Closes an opened container.

Syntax

fn close(&self, save_changes : bool) -> Result<(), SecureBlackboxError>

Remarks

Use this method to close a previously opened container. Set SaveChanges to true to apply any changes made.

config method (ASiCVerifier Struct)

Sets or retrieves a configuration setting.

Syntax

fn config(&self, configuration_string : &str) ->  Result<String, SecureBlackboxError>

Remarks

config is a generic method available in every struct. It is used to set and retrieve configuration settings for the struct.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the struct, access to these internal properties is provided through the config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

do_action method (ASiCVerifier Struct)

Performs an additional action.

Syntax

fn do_action(&self, action_id : &str, action_params : &str) ->  Result<String, SecureBlackboxError>

Remarks

do_action is a generic method available in every struct. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Common ActionIDs:


Action	Parameters	Returned value	Description
ResetTrustedListCache	none	none	Clears the cached list of trusted lists.
ResetCertificateCache	none	none	Clears the cached certificates.
ResetCRLCache	none	none	Clears the cached CRLs.
ResetOCSPResponseCache	none	none	Clears the cached OCSP responses.

extract_file method (ASiCVerifier Struct)

Extracts a file to one of the output media (bytes, stream, or disk file).

Syntax

fn extract_file(&self, file_name : &str) -> Result<(), SecureBlackboxError>

Remarks

Use this method to extract a single archived

extract_files method (ASiCVerifier Struct)

Extracts files covered by a signature to OutputPath .

Syntax

fn extract_files(&self, sig_label : &str) -> Result<(), SecureBlackboxError>

Remarks

Use this method to extract all files covered by the signature SigLabel to output_path. Set SigLabel to "" to extract all the files included in the container.

open method (ASiCVerifier Struct)

Opens an existing container for signing or updating.

Syntax

fn open(&self) -> Result<(), SecureBlackboxError>

Remarks

Use this method to open a container for signing or updating. When finished, call close to complete or discard the operation.

reset method (ASiCVerifier Struct)

Resets the struct settings.

Syntax

fn reset(&self) -> Result<(), SecureBlackboxError>

Remarks

reset is a generic method available in every struct.

revalidate method (ASiCVerifier Struct)

Revalidates a signature in accordance with current settings.

Syntax

fn revalidate(&self, sig_label : &str) -> Result<(), SecureBlackboxError>

Remarks

Use this method to re-validate a signature in the opened ASiC document.

select_info method (ASiCVerifier Struct)

Select signature information for a specific entity.

Syntax

fn select_info(&self, entity_label : &str, info_type : i32, clear_selection : bool) -> Result<(), SecureBlackboxError>

Remarks

Use this method to select (or filter) signature-related information for a specific signature element.

Provide the unique label of the entity that you are interested in via the EntityLabel parameter. Use one of the following filters, or their combination, to specify what information you are interested in:


sitEntity	`1`	Select the current entity
sitParentEntity	`2`	Select the parent entity of the current entity
sitTimestamps	`4`	Select all timestamps covering the current entity
sitSignatures	`8`	Select all signatures covering the current entity
sitSigningChain	`16`	Select the signing chain of the current entity
sitEmbeddedCertificates	`256`	Select all certificates embedded in the current entity
sitEmbeddedCRLs	`512`	Select all CRLs embedded in the current entity
sitEmbeddedOCSPs	`1024`	Select all OCSP responses embedded in the current entity
sitEmbeddedRevInfo	`1792`	Select the whole pack of embedded revocation information (certificates, CRLs and OCSPs)
sitUsedCertificates	`4096`	Select all the certificates used to validate this entity's chain
sitUsedCRLs	`8192`	Select all the CRLs used to validate this entity's chain
sitUsedOCSPs	`16384`	Select all the OCSP responses used to validate this entity's chain
sitUsedRevInfo	`28672`	Select the whole pack of revocation information used to validate this entity's chain (certificates, CRLs, OCSP responses)
sitAttributes	`65536`	Select this entity's CMS attributes
sitReferences	`131072`	Select this entity's XML references
sitSignedParts	`262144`	Select this entity's signed parts

Following the call, the relevant pieces of information will be copied to the respective component properties (Certificates, CRLs, OCSPs). Note that you can accumulate information in the properties by making repeated calls to select_info and keeping ClearSelection set to false.

This method is useful if you would like to read/display detailed information about a particular signature or timestamp.

unsign method (ASiCVerifier Struct)

Deletes a signature from the container.

Syntax

fn unsign(&self, sig_label : &str) -> Result<(), SecureBlackboxError>

Remarks

Use this method to delete an existing signature from the container. Use SigLabel parameter to specify the signature to be removed.

verify method (ASiCVerifier Struct)

Verifies all signatures in the ASiC container.

Syntax

fn verify(&self) -> Result<(), SecureBlackboxError>

Remarks

Use this method to verify the signature and any associated signed files residing in the ASiC container.

When processing the container, the verifier walks through all the signatures contained in the message, one after another.

For each signature, the on_signature_found event is thrown. The benefits of this are that it:

Lets you know some basic details about the signature and its creator
Allows you to tell the component whether or not you want to validate it and/or its signing certificate's chain
Gives you a chance to provide any missing certificates (CertFound indicates whether you need to do that)

The control then validates the signature and the chain (if told to do so in on_signature_found), reporting the validity of each via on_signature_validated and on_chain_validated events, respectively. Before these events are fired, the properties of the signature are populated in the control's properties. Two properties that may be useful to read inside the event handlers are those reporting the signature's creation time, claimed_signing_time and validated_signing_time.

The control's properties remain assigned with the last processed signature's details, and are still available after the Verify() call returns, providing a handy way to work with single-signature containers.

Once the main signature's processing completes, the control proceeds to its subordinate elements (countersignatures and/or timestamps). Each timestamp is reported via on_timestamp_validated event.

Having reported all the countersignatures and timestamps, the control proceeds to the next main signature and any timestamps associated with it - and so on.

on_chain_element_download event (ASiCVerifier Struct)

Fires when there is a need to download a chain element from an online source.

Syntax

// ASiCVerifierChainElementDownloadEventArgs carries the ASiCVerifier ChainElementDownload event's parameters.
pub struct ASiCVerifierChainElementDownloadEventArgs {
  fn kind(&self) -> i32
  fn cert_rdn(&self) -> &String
  fn ca_cert_rdn(&self) -> &String
  fn location(&self) -> &String
  fn action(&self) -> i32
  fn set_action(&self, value : i32)
}

// ASiCVerifierChainElementDownloadEvent defines the signature of the ASiCVerifier ChainElementDownload event's handler function.
pub trait ASiCVerifierChainElementDownloadEvent {
  fn on_chain_element_download(&self, sender : ASiCVerifier, e : &mut ASiCVerifierChainElementDownloadEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_chain_element_download(&self) -> &'a dyn ASiCVerifierChainElementDownloadEvent;
  pub fn set_on_chain_element_download(&mut self, value : &'a dyn ASiCVerifierChainElementDownloadEvent);
  ...
}

Remarks

Subscribe to this event to be notified about validation element retrievals. Use the Action parameter to suppress the download if required.


veaAuto	`0`	Handle the action automatically (the default behaviour)
veaContinue	`1`	Accept the request implied by the event (accept the certificate, allow the object retrieval)
veaReject	`2`	Reject the request implied by the event (reject the certificate, disallow the object retrieval)
veaAcceptNow	`3`	Accept the validated certificate immediately
veaAbortNow	`4`	Abort the validation, reject the certificate


cekUnknown	`0`	Unknown or unsupported element type
cekCertificate	`1`	An X.509 certificate
cekCRL	`2`	A CRL
cekOCSP	`3`	An OCSP response

on_chain_element_needed event (ASiCVerifier Struct)

Fires when an element required to validate the chain was not located.

Syntax

// ASiCVerifierChainElementNeededEventArgs carries the ASiCVerifier ChainElementNeeded event's parameters.
pub struct ASiCVerifierChainElementNeededEventArgs {
  fn kind(&self) -> i32
  fn cert_rdn(&self) -> &String
  fn ca_cert_rdn(&self) -> &String
}

// ASiCVerifierChainElementNeededEvent defines the signature of the ASiCVerifier ChainElementNeeded event's handler function.
pub trait ASiCVerifierChainElementNeededEvent {
  fn on_chain_element_needed(&self, sender : ASiCVerifier, e : &mut ASiCVerifierChainElementNeededEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_chain_element_needed(&self) -> &'a dyn ASiCVerifierChainElementNeededEvent;
  pub fn set_on_chain_element_needed(&mut self, value : &'a dyn ASiCVerifierChainElementNeededEvent);
  ...
}

Remarks

Subscribe to this event to be notified about missing validation elements. Use the known_crls, known_certificates, and known_ocsps properties in the event handler to provide the missing piece.


cekUnknown	`0`	Unknown or unsupported element type
cekCertificate	`1`	An X.509 certificate
cekCRL	`2`	A CRL
cekOCSP	`3`	An OCSP response

on_chain_element_store event (ASiCVerifier Struct)

This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.

Syntax

// ASiCVerifierChainElementStoreEventArgs carries the ASiCVerifier ChainElementStore event's parameters.
pub struct ASiCVerifierChainElementStoreEventArgs {
  fn kind(&self) -> i32
  fn body(&self) -> &[u8]
  fn uri(&self) -> &String
  fn set_uri(&self, value : &str)
  fn set_uri_ref(&self, value : &String)
}

// ASiCVerifierChainElementStoreEvent defines the signature of the ASiCVerifier ChainElementStore event's handler function.
pub trait ASiCVerifierChainElementStoreEvent {
  fn on_chain_element_store(&self, sender : ASiCVerifier, e : &mut ASiCVerifierChainElementStoreEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_chain_element_store(&self) -> &'a dyn ASiCVerifierChainElementStoreEvent;
  pub fn set_on_chain_element_store(&mut self, value : &'a dyn ASiCVerifierChainElementStoreEvent);
  ...
}

Remarks

This event could occur if you are verifying XAdES-C form or higher. The Body parameter contains the element in binary form that should be stored along with a signature. Use the URI parameter to provide an URI of the stored element.


cekUnknown	`0`	Unknown or unsupported element type
cekCertificate	`1`	An X.509 certificate
cekCRL	`2`	A CRL
cekOCSP	`3`	An OCSP response

on_chain_validated event (ASiCVerifier Struct)

Reports the completion of a certificate chain validation.

Syntax

// ASiCVerifierChainValidatedEventArgs carries the ASiCVerifier ChainValidated event's parameters.
pub struct ASiCVerifierChainValidatedEventArgs {
  fn index(&self) -> i32
  fn entity_label(&self) -> &String
  fn subject_rdn(&self) -> &String
  fn validation_result(&self) -> i32
  fn validation_details(&self) -> i32
  fn cancel(&self) -> bool
  fn set_cancel(&self, value : bool)
}

// ASiCVerifierChainValidatedEvent defines the signature of the ASiCVerifier ChainValidated event's handler function.
pub trait ASiCVerifierChainValidatedEvent {
  fn on_chain_validated(&self, sender : ASiCVerifier, e : &mut ASiCVerifierChainValidatedEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_chain_validated(&self) -> &'a dyn ASiCVerifierChainValidatedEvent;
  pub fn set_on_chain_validated(&mut self, value : &'a dyn ASiCVerifierChainValidatedEvent);
  ...
}

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Any other value reports a failure, and ValidationDetails provides more details on its reasons.


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

on_chain_validation_progress event (ASiCVerifier Struct)

This event is fired multiple times during chain validation to report various stages of the validation procedure.

Syntax

// ASiCVerifierChainValidationProgressEventArgs carries the ASiCVerifier ChainValidationProgress event's parameters.
pub struct ASiCVerifierChainValidationProgressEventArgs {
  fn event_kind(&self) -> &String
  fn cert_rdn(&self) -> &String
  fn ca_cert_rdn(&self) -> &String
  fn action(&self) -> i32
  fn set_action(&self, value : i32)
}

// ASiCVerifierChainValidationProgressEvent defines the signature of the ASiCVerifier ChainValidationProgress event's handler function.
pub trait ASiCVerifierChainValidationProgressEvent {
  fn on_chain_validation_progress(&self, sender : ASiCVerifier, e : &mut ASiCVerifierChainValidationProgressEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_chain_validation_progress(&self) -> &'a dyn ASiCVerifierChainValidationProgressEvent;
  pub fn set_on_chain_validation_progress(&mut self, value : &'a dyn ASiCVerifierChainValidationProgressEvent);
  ...
}

Remarks

Subscribe to this event to be notified about chain validation progress. Use the Action parameter to alter the validation flow.

The EventKind parameter reports the nature of the event being reported. The CertRDN and CACertRDN parameters report the distinguished names of the certificates that are relevant for the event invocation (one or both can be empty, depending on EventKind). Use the Action parameter to adjust the validation flow.


veaAuto	`0`	Handle the action automatically (the default behaviour)
veaContinue	`1`	Accept the request implied by the event (accept the certificate, allow the object retrieval)
veaReject	`2`	Reject the request implied by the event (reject the certificate, disallow the object retrieval)
veaAcceptNow	`3`	Accept the validated certificate immediately
veaAbortNow	`4`	Abort the validation, reject the certificate

on_container_loaded event (ASiCVerifier Struct)

This event is fired when the container has been loaded into memory.

Syntax

// ASiCVerifierContainerLoadedEventArgs carries the ASiCVerifier ContainerLoaded event's parameters.
pub struct ASiCVerifierContainerLoadedEventArgs {
  fn cancel(&self) -> bool
  fn set_cancel(&self, value : bool)
}

// ASiCVerifierContainerLoadedEvent defines the signature of the ASiCVerifier ContainerLoaded event's handler function.
pub trait ASiCVerifierContainerLoadedEvent {
  fn on_container_loaded(&self, sender : ASiCVerifier, e : &mut ASiCVerifierContainerLoadedEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_container_loaded(&self) -> &'a dyn ASiCVerifierContainerLoadedEvent;
  pub fn set_on_container_loaded(&mut self, value : &'a dyn ASiCVerifierContainerLoadedEvent);
  ...
}

Remarks

The handler for this event is a good place to check for any existing signatures and validate them if required.

Set Cancel to true to terminate document processing on this stage.

on_error event (ASiCVerifier Struct)

Information about errors during ASiC signature verification.

Syntax

// ASiCVerifierErrorEventArgs carries the ASiCVerifier Error event's parameters.
pub struct ASiCVerifierErrorEventArgs {
  fn error_code(&self) -> i32
  fn description(&self) -> &String
}

// ASiCVerifierErrorEvent defines the signature of the ASiCVerifier Error event's handler function.
pub trait ASiCVerifierErrorEvent {
  fn on_error(&self, sender : ASiCVerifier, e : &mut ASiCVerifierErrorEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_error(&self) -> &'a dyn ASiCVerifierErrorEvent;
  pub fn set_on_error(&mut self, value : &'a dyn ASiCVerifierErrorEvent);
  ...
}

Remarks

The event is fired in case of exceptional conditions during ASiC signature verification.

ErrorCode contains an error code and Description contains a textual description of the error.

on_file_extraction_start event (ASiCVerifier Struct)

Signifies the start of a file extraction process.

Syntax

// ASiCVerifierFileExtractionStartEventArgs carries the ASiCVerifier FileExtractionStart event's parameters.
pub struct ASiCVerifierFileExtractionStartEventArgs {
  fn file_name(&self) -> &String
  fn file_size(&self) -> i64
  fn mod_date(&self) -> &String
  fn extract(&self) -> bool
  fn set_extract(&self, value : bool)
  fn dest_file(&self) -> &String
  fn set_dest_file(&self, value : &str)
  fn set_dest_file_ref(&self, value : &String)
}

// ASiCVerifierFileExtractionStartEvent defines the signature of the ASiCVerifier FileExtractionStart event's handler function.
pub trait ASiCVerifierFileExtractionStartEvent {
  fn on_file_extraction_start(&self, sender : ASiCVerifier, e : &mut ASiCVerifierFileExtractionStartEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_file_extraction_start(&self) -> &'a dyn ASiCVerifierFileExtractionStartEvent;
  pub fn set_on_file_extraction_start(&mut self, value : &'a dyn ASiCVerifierFileExtractionStartEvent);
  ...
}

Remarks

This event fires for every file located in the archive and matching the extraction_mode setting before it is to be extracted.

DestFile indicates the path where the file will be saved to. You can alter the destination path here, by providing an alternative extraction path.

Set DestFile to an empty string and provide a stream object via the output_stream property if you prefer to save the data to a stream instead of file.

If DestFile is set to an empty string and output_stream is unassigned, the file will not be extracted.

Alternatively, you can request the extracted content to be saved into a byte array. To do this, leave DestFile and output_stream empty, and keep the Extract parameter enabled.

Please take care when extracting large files into byte arrays, as those may consume large amounts of memory.

Note: if DestFile already exists, the struct will overwrite it. To prevent overwriting of existing files, subscribe to this event, and change DestFile when needed.

on_notification event (ASiCVerifier Struct)

This event notifies the application about an underlying control flow event.

Syntax

// ASiCVerifierNotificationEventArgs carries the ASiCVerifier Notification event's parameters.
pub struct ASiCVerifierNotificationEventArgs {
  fn event_id(&self) -> &String
  fn event_param(&self) -> &String
}

// ASiCVerifierNotificationEvent defines the signature of the ASiCVerifier Notification event's handler function.
pub trait ASiCVerifierNotificationEvent {
  fn on_notification(&self, sender : ASiCVerifier, e : &mut ASiCVerifierNotificationEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_notification(&self) -> &'a dyn ASiCVerifierNotificationEvent;
  pub fn set_on_notification(&mut self, value : &'a dyn ASiCVerifierNotificationEvent);
  ...
}

Remarks

The struct fires this event to let the application know about some event, occurrence, or milestone in the struct. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the struct, the exact action it is performing, or the document being processed, one or both may be omitted.

This struct can fire this event with the following EventID values:


ContainerLoaded	Notifies the application that the ASiC container has been loaded. This is a backward-compatibility-only notification: use OnContainerLoaded event instead.
RetrieveQualifyingProperties	TBD
BeforeTimestamp	This event is fired before a timestamp is requested from the timestamping authority. Use the event handler to modify TSA and HTTP settings.
TimestampError	This event is only fired if the struct failed to obtain a timestamp from the timestamping authority. The EventParam parameter contains extended error info.
TimestampRequest	A timestamp is requested from the custom timestamping authority. This event is only fired if timestamp_server was set to a virtual:// URI. The EventParam parameter contains the TSP request (or the plain hash, depending on the value provided to timestamp_server), in base16, that needs to be sent to the TSA. Use the event handler to send the request to the TSA. Upon receiving the response, assign it, in base16, to the TimestampResponse configuration property.

on_signature_found event (ASiCVerifier Struct)

Signifies the start of signature validation.

Syntax

// ASiCVerifierSignatureFoundEventArgs carries the ASiCVerifier SignatureFound event's parameters.
pub struct ASiCVerifierSignatureFoundEventArgs {
  fn index(&self) -> i32
  fn entity_label(&self) -> &String
  fn issuer_rdn(&self) -> &String
  fn serial_number(&self) -> &[u8]
  fn subject_key_id(&self) -> &[u8]
  fn cert_found(&self) -> bool
  fn validate_signature(&self) -> bool
  fn set_validate_signature(&self, value : bool)
  fn validate_chain(&self) -> bool
  fn set_validate_chain(&self, value : bool)
}

// ASiCVerifierSignatureFoundEvent defines the signature of the ASiCVerifier SignatureFound event's handler function.
pub trait ASiCVerifierSignatureFoundEvent {
  fn on_signature_found(&self, sender : ASiCVerifier, e : &mut ASiCVerifierSignatureFoundEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_signature_found(&self) -> &'a dyn ASiCVerifierSignatureFoundEvent;
  pub fn set_on_signature_found(&mut self, value : &'a dyn ASiCVerifierSignatureFoundEvent);
  ...
}

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound parameter is set to True if the struct has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the known_certificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

on_signature_validated event (ASiCVerifier Struct)

Marks the completion of the signature validation routine.

Syntax

// ASiCVerifierSignatureValidatedEventArgs carries the ASiCVerifier SignatureValidated event's parameters.
pub struct ASiCVerifierSignatureValidatedEventArgs {
  fn index(&self) -> i32
  fn entity_label(&self) -> &String
  fn issuer_rdn(&self) -> &String
  fn serial_number(&self) -> &[u8]
  fn subject_key_id(&self) -> &[u8]
  fn validation_result(&self) -> i32
  fn cancel(&self) -> bool
  fn set_cancel(&self, value : bool)
}

// ASiCVerifierSignatureValidatedEvent defines the signature of the ASiCVerifier SignatureValidated event's handler function.
pub trait ASiCVerifierSignatureValidatedEvent {
  fn on_signature_validated(&self, sender : ASiCVerifier, e : &mut ASiCVerifierSignatureValidatedEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_signature_validated(&self) -> &'a dyn ASiCVerifierSignatureValidatedEvent;
  pub fn set_on_signature_validated(&mut self, value : &'a dyn ASiCVerifierSignatureValidatedEvent);
  ...
}

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure
svtReferenceCorrupted	`5`	Reference corrupted (XML-based signatures only)

on_timestamp_found event (ASiCVerifier Struct)

Signifies the start of a timestamp validation routine.

Syntax

// ASiCVerifierTimestampFoundEventArgs carries the ASiCVerifier TimestampFound event's parameters.
pub struct ASiCVerifierTimestampFoundEventArgs {
  fn index(&self) -> i32
  fn entity_label(&self) -> &String
  fn issuer_rdn(&self) -> &String
  fn serial_number(&self) -> &[u8]
  fn subject_key_id(&self) -> &[u8]
  fn cert_found(&self) -> bool
  fn validate_timestamp(&self) -> bool
  fn set_validate_timestamp(&self, value : bool)
  fn validate_chain(&self) -> bool
  fn set_validate_chain(&self, value : bool)
}

// ASiCVerifierTimestampFoundEvent defines the signature of the ASiCVerifier TimestampFound event's handler function.
pub trait ASiCVerifierTimestampFoundEvent {
  fn on_timestamp_found(&self, sender : ASiCVerifier, e : &mut ASiCVerifierTimestampFoundEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_timestamp_found(&self) -> &'a dyn ASiCVerifierTimestampFoundEvent;
  pub fn set_on_timestamp_found(&mut self, value : &'a dyn ASiCVerifierTimestampFoundEvent);
  ...
}

Remarks

This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.

Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

on_timestamp_validated event (ASiCVerifier Struct)

Reports the completion of the timestamp validation routine.

Syntax

// ASiCVerifierTimestampValidatedEventArgs carries the ASiCVerifier TimestampValidated event's parameters.
pub struct ASiCVerifierTimestampValidatedEventArgs {
  fn index(&self) -> i32
  fn entity_label(&self) -> &String
  fn issuer_rdn(&self) -> &String
  fn serial_number(&self) -> &[u8]
  fn subject_key_id(&self) -> &[u8]
  fn time(&self) -> &String
  fn validation_result(&self) -> i32
  fn chain_validation_result(&self) -> i32
  fn chain_validation_details(&self) -> i32
  fn cancel(&self) -> bool
  fn set_cancel(&self, value : bool)
}

// ASiCVerifierTimestampValidatedEvent defines the signature of the ASiCVerifier TimestampValidated event's handler function.
pub trait ASiCVerifierTimestampValidatedEvent {
  fn on_timestamp_validated(&self, sender : ASiCVerifier, e : &mut ASiCVerifierTimestampValidatedEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_timestamp_validated(&self) -> &'a dyn ASiCVerifierTimestampValidatedEvent;
  pub fn set_on_timestamp_validated(&mut self, value : &'a dyn ASiCVerifierTimestampValidatedEvent);
  ...
}

Remarks

This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure
svtReferenceCorrupted	`5`	Reference corrupted (XML-based signatures only)

on_tls_cert_needed event (ASiCVerifier Struct)

Fires when a remote TLS party requests a client certificate.

Syntax

// ASiCVerifierTLSCertNeededEventArgs carries the ASiCVerifier TLSCertNeeded event's parameters.
pub struct ASiCVerifierTLSCertNeededEventArgs {
  fn host(&self) -> &String
  fn ca_names(&self) -> &String
}

// ASiCVerifierTLSCertNeededEvent defines the signature of the ASiCVerifier TLSCertNeeded event's handler function.
pub trait ASiCVerifierTLSCertNeededEvent {
  fn on_tls_cert_needed(&self, sender : ASiCVerifier, e : &mut ASiCVerifierTLSCertNeededEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_tls_cert_needed(&self) -> &'a dyn ASiCVerifierTLSCertNeededEvent;
  pub fn set_on_tls_cert_needed(&mut self, value : &'a dyn ASiCVerifierTLSCertNeededEvent);
  ...
}

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the tls_client_chain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the on_tls_handshake event for the given host and, if the certificate was accepted, succeeded by the on_tls_established event.

on_tls_cert_validate event (ASiCVerifier Struct)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

// ASiCVerifierTLSCertValidateEventArgs carries the ASiCVerifier TLSCertValidate event's parameters.
pub struct ASiCVerifierTLSCertValidateEventArgs {
  fn server_host(&self) -> &String
  fn server_ip(&self) -> &String
  fn accept(&self) -> bool
  fn set_accept(&self, value : bool)
}

// ASiCVerifierTLSCertValidateEvent defines the signature of the ASiCVerifier TLSCertValidate event's handler function.
pub trait ASiCVerifierTLSCertValidateEvent {
  fn on_tls_cert_validate(&self, sender : ASiCVerifier, e : &mut ASiCVerifierTLSCertValidateEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_tls_cert_validate(&self) -> &'a dyn ASiCVerifierTLSCertValidateEvent;
  pub fn set_on_tls_cert_validate(&mut self, value : &'a dyn ASiCVerifierTLSCertValidateEvent);
  ...
}

Remarks

This event is fired during a TLS handshake. Use the tls_server_chain property to access the certificate chain. In general, structs may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the struct, and can be adjusted if needed.

on_tls_established event (ASiCVerifier Struct)

Fires when a TLS handshake with Host successfully completes.

Syntax

// ASiCVerifierTLSEstablishedEventArgs carries the ASiCVerifier TLSEstablished event's parameters.
pub struct ASiCVerifierTLSEstablishedEventArgs {
  fn host(&self) -> &String
  fn version(&self) -> &String
  fn ciphersuite(&self) -> &String
  fn connection_id(&self) -> &[u8]
  fn abort(&self) -> bool
  fn set_abort(&self, value : bool)
}

// ASiCVerifierTLSEstablishedEvent defines the signature of the ASiCVerifier TLSEstablished event's handler function.
pub trait ASiCVerifierTLSEstablishedEvent {
  fn on_tls_established(&self, sender : ASiCVerifier, e : &mut ASiCVerifierTLSEstablishedEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_tls_established(&self) -> &'a dyn ASiCVerifierTLSEstablishedEvent;
  pub fn set_on_tls_established(&mut self, value : &'a dyn ASiCVerifierTLSEstablishedEvent);
  ...
}

Remarks

The struct uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

on_tls_handshake event (ASiCVerifier Struct)

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

// ASiCVerifierTLSHandshakeEventArgs carries the ASiCVerifier TLSHandshake event's parameters.
pub struct ASiCVerifierTLSHandshakeEventArgs {
  fn host(&self) -> &String
  fn abort(&self) -> bool
  fn set_abort(&self, value : bool)
}

// ASiCVerifierTLSHandshakeEvent defines the signature of the ASiCVerifier TLSHandshake event's handler function.
pub trait ASiCVerifierTLSHandshakeEvent {
  fn on_tls_handshake(&self, sender : ASiCVerifier, e : &mut ASiCVerifierTLSHandshakeEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_tls_handshake(&self) -> &'a dyn ASiCVerifierTLSHandshakeEvent;
  pub fn set_on_tls_handshake(&mut self, value : &'a dyn ASiCVerifierTLSHandshakeEvent);
  ...
}

Remarks

The struct uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the on_tls_established event. If the server chooses to request a client certificate, the on_tls_cert_needed event will also be fired.

on_tls_shutdown event (ASiCVerifier Struct)

Reports the graceful closure of a TLS connection.

Syntax

// ASiCVerifierTLSShutdownEventArgs carries the ASiCVerifier TLSShutdown event's parameters.
pub struct ASiCVerifierTLSShutdownEventArgs {
  fn host(&self) -> &String
}

// ASiCVerifierTLSShutdownEvent defines the signature of the ASiCVerifier TLSShutdown event's handler function.
pub trait ASiCVerifierTLSShutdownEvent {
  fn on_tls_shutdown(&self, sender : ASiCVerifier, e : &mut ASiCVerifierTLSShutdownEventArgs);
}

impl <'a> ASiCVerifier<'a> {
  pub fn on_tls_shutdown(&self) -> &'a dyn ASiCVerifierTLSShutdownEvent;
  pub fn set_on_tls_shutdown(&mut self, value : &'a dyn ASiCVerifierTLSShutdownEvent);
  ...
}

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Config Settings (ASiCVerifier Struct)

The struct accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the struct, access to these internal properties is provided through the config method.

ASiCVerifier Config Settings

AddAllDataObjectsTimestamp: Whether to add all data objects timestamp during signing.

If this property is set to True, the all data objects timestamp (xades:AllDataObjectsTimeStamp element) will be added.

AsyncDocumentID: Specifies the document ID for SignAsyncEnd() call.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. This value helps ASiCSigner identify the correct signature in the returned batch of responses. If using batched requests, make sure to set this property to the same value on both pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

CachedCRLMaxAge: Specifies the maximum age of a cached CRL.

Use this setting to specify the maximum number of seconds that may pass since a CRL was added to the global cache. When the cached CRL is older than this value, it is disregarded and a new CRL should be fetched.

The default value is 1 day (86400 seconds). A value of 0 disables the absolute CRL age check. See RevocationCacheAgePolicy for configuring this setting together with the related cached revocation freshness settings.

CachedCRLMaxAgeRatio: Specifies the maximum age of a cached CRL as a percentage of its remaining lifetime.

Use this setting to specify the percentage of the CRL's remaining lifetime, measured from the time the CRL was added to the global cache to the CRL's NextUpdate. When this portion of the remaining lifetime has passed, the cached CRL is disregarded and a new CRL should be fetched.

The default value is 50 percent. Values are interpreted in the 0..100 range. A value of 0 disables the CRL ratio check. See RevocationCacheAgePolicy for configuring this setting together with the related cached revocation freshness settings.

CachedCRLOverlapTime: Specifies the time period before a cached CRL's NextUpdate when it is considered stale and must be refreshed.

Use this setting to specify the number of seconds before the NextUpdate time at which the cached CRL should be disregarded, and a new CRL should be fetched.

The default value is 10 minutes (600 seconds). A value of 0 disables the CRL overlap check. See RevocationCacheAgePolicy for configuring this setting together with the related cached revocation freshness settings.

This setting is evaluated independently from CachedCRLMaxAge and CachedCRLMaxAgeRatio. If several cached CRL freshness settings are enabled, the cached CRL is used only if it satisfies all of them.

CachedOCSPResponseMaxAge: Specifies the maximum age of a cached OCSP response.

Use this setting to specify the maximum number of seconds that may pass since an OCSP response was added to the global cache. When the cached OCSP response is older than this value, it is disregarded and a new OCSP response should be fetched.

The default value is 1 hour (3600 seconds). A value of 0 disables the absolute OCSP response age check. This setting is also used to limit open-ended OCSP responses that do not have NextUpdate. See RevocationCacheAgePolicy for configuring this setting together with the related cached revocation freshness settings.

CachedOCSPResponseMaxAgeRatio: Specifies the maximum age of a cached OCSP response as a percentage of its remaining lifetime.

Use this setting to specify the percentage of the OCSP response's remaining lifetime, measured from the time the OCSP response was added to the global cache to the response's NextUpdate. When this portion of the remaining lifetime has passed, the cached OCSP response is disregarded and a new OCSP response should be fetched.

The default value is 50 percent. Values are interpreted in the 0..100 range. Open-ended OCSP responses without NextUpdate ignore this setting; use CachedOCSPResponseMaxAge to limit their age. A value of 0 disables the OCSP response ratio check. See RevocationCacheAgePolicy for configuring this setting together with the related cached revocation freshness settings.

CachedOCSPResponseOverlapTime: Specifies the time period before a cached OCSP response's NextUpdate when it is considered stale and must be refreshed.

Use this setting to specify the number of seconds before the NextUpdate time at which the cached OCSP response should be disregarded, and a new OCSP response should be fetched.

The default value is 10 minutes (600 seconds). A value of 0 disables the OCSP response overlap check. See RevocationCacheAgePolicy for configuring this setting together with the related cached revocation freshness settings.

This setting is evaluated independently from CachedOCSPResponseMaxAge and CachedOCSPResponseMaxAgeRatio. If several cached OCSP response freshness settings are enabled, the cached OCSP response is used only if it satisfies all of them.

ChainCurrentCACert: Returns the current CA certificate.

This property returns the CA certificate that is used on the current step.

ChainCurrentCert: Returns the certificate that is currently being validated.

Use this property to obtain the body of the certificate that is currently being validated.

ChainCurrentCRL: Returns the current CRL.

Returns the CRL object that is currently being processed.

ChainCurrentCRLSize: Returns the size of the current CRL.

This property returns the size of the CRL object that is currently being processed.

ChainCurrentOCSP: Returns the current OCSP response.

Returns the OCSP object that is currently being processed.

ChainCurrentOCSPSigner: Returns the signer of the current OCSP object.

Returns the signer/CA that has issued the OCSP response that is currently being processed.

ChainInterimDetails: Returns the current interim validation details.

This property returns the interim chain validation details.

ChainInterimResult: Returns the current interim validation result.

Use this setting to obtain the current (mid-chain) validation result. This property applies to the current validation step and may change as the chain walk proceeds. The final result will be published in the ChainValidationResult property once the validation process completes.

CheckValidityPeriodForTrusted: Whether to check validity period for trusted certificates.

Whether to check validity period for trusted certificates.

ClaimedRolesXML: The XML content of the claimed roles.

Use this property to get/specify the XML content of the claimed roles element.

ClaimedRoleText: The text of the claimed role.

Use this property to get/specify the text of the first claimed role.

CmsOptAnnexKArchiveTimestampV2Mode: Toggles use of Annex K method of calculating validation timestamp hashes.

This CMS message option toggles the use of Annex K method of calculating validation timestamp hashes. Switch this option off to stick to RFC5126 p6.3.5 method.

CmsOptCheckATSHashIndexElements: Enables extra checks when processing ATSHashIndex attribute.

This CMS message option enables an extra check to make sure every hash in ATSHashIndex has an associated CMS element.

CmsOptCompareRDNAsStrings: Enforces comparison of RDN elements as text strings, rather than their byte encodings.

This CMS message option enforces comparison of string RDN elements as text strings rather than their original byte encodings.

CmsOptDEREncodeContentForATSv2: Enables DER encoding for ATSv2 hashed content.

This is an outdated setting, which reflects a complicated (at times) story of AdES infrastructure development. You are unlikely to need it.

CmsOptDigitPADSSCompatibility: Enables Digit PADSS compatibility mode.

This CMS message option enables compatibility mode with Digit PADSS software.

CmsOptForceSigningCertificateV2Usage: Enforces use of signing-certificate-v2 attribute.

This CMS message option enforces the use of signing-certificate-v2 attribute in favour of older signing-certificate-v1. Current regulations require that signing-certificate-v2 is used at all times.

CmsOptIgnoreDERReqInArchiveTimestamps: Switches off DER encoding requirement for archival timestamps.

This CMS message option switches off DER encoding requirement for archival timestamps (normally meaning no attribute reordering). This setting is a workaround for certain buggy CAdES products.

CmsOptImzagerMIMCompatibility: Enables Imzager MIM compatibility mode.

This CMS message option enables compatibility mode with Imzager MIM software.

CmsOptIncludeCertToAttributes: Regulates whether to include the signing certificate to the signature as the signing-certificate attribute.

This CMS message option controls inclusion of the signing certificate as the signing-certificate attribute. Current regulations require that this attribute is present.

CmsOptIncludeCertToMessage: Regulates whether to include the signing certificate and its chain to the CMS.

This CMS message option controls inclusion of the signing certificate to the CMS structure. It is recommended that the certificate is included. Note that this option has no effect if the signature level used (e.g. XL) enforces inclusion of the certificate to the message.

CmsOptInsertContentType: Regulates whether the content-type time attribute should be included in the signature structure.

This CMS message option specifies whether the content-type attribute should be included in the signature structure.

CmsOptInsertMessageDigests: Regulates whether the message-digest signed attribute should be included in the signature structure.

This CMS message option controls inclusion of the message-digest attribute in the signature structure. Current regulations require that this attribute is present at all times.

CmsOptInsertSigningTime: Regulates whether the signing-time attribute should be included in the signature structure.

This CMS message option specifies whether the signing-time attribute should be included in the signature structure. Switch it off to suppress inclusion of the signing-time attribute.

CmsOptSkipEnvContentInfoOnSigArchival: Excludes hashing of enveloped content when calculating an archival timestamp.

This CMS message option excludes hashing of enveloped content when calculating an archival timestamp. This setting is a workaround for certain buggy CAdES products.

CmsOptUseATSHashIndexV1: Enables use of ATSHashIndexV1 attribute.

This CMS message option enables use of deprecated ATSHashIndexV1 attribute when calculating archival timestamp V3 hashes.

CmsOptUseATSHashIndexV3: Enables the use of the third version of archival timestamps.

Enables the use of archival timestamp v3 objects when creating long-term and archival signatures. This is the default setting. Setting it to false tells the components to stick with archival timestamps version 2.

CmsOptUseGeneralizedTimeFormat: Enables or disables encoding of the signing-time attribute using ASN.1 GENERALIZEDTIME type.

This CMS message option controls whether the signing-time attribute should be encoded as GENERALIZEDTIME or UTCTIME. Current regulations require that the GENERALIZEDTIME type is used at all times.

CmsOptUseGenericSigAlgorithmOIDs: Enables use of generic signature algorithm OIDs in the signature.

This CMS message option enforces the use of generic public key algorithm OIDs (e.g. rsaEncryption) instead of hash algorithm-specific variants (e.g. sha256withRsaEncryption). This setting is a workaround for certain buggy CAdES products.

CmsOptUsePlainContentForTimestampHashes: Makes CAdESSigner ignore ASN.1 content formatting when calculating timestamp hashes.

This CMS message option causes CAdESSigner to ignore ASN.1 formatting when feeding content to timestamp hashes (might make a difference with split OCTETSTRINGs for extra long contents). This option is only applicable to content timestamps and ArchivalTimestampV1's. This setting is a workaround for certain buggy CAdES products.

CommitmentTypeIndicationAllSignedDataObjects[Index]: Specifies the CommitmentTypeIndication's AllSignedDataObjects.

This property contains if the CommitmentTypeIndication's AllSignedDataObjects element is present that indicates that all the signed data objects share the same commitment. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationCount: The number of the CommitmentTypeIndication elements.

Returns the number of the xades:CommitmentTypeIndication elements available.

CommitmentTypeIndicationIdentifier[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier.

This property contains an identifier indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's Identifier element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierDescription[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's Description.

This property contains an identifier's description indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's Description element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierDocumentationReferences[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences.

This property contains an identifier's documentation references indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierQualifier[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier.

This property contains an identifier qualifier indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationObjectReference[Index]: Specifies the CommitmentTypeIndication's ObjectReference.

This property contains the CommitmentTypeIndication's ObjectReference elements that refer to one or several ds:Reference elements of the ds:SignedInfo corresponding with one data object qualified by this property. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationQualifiersXML[Index]: The XML content of the CommitmentTypeIndication's Qualifiers.

This property contains the CommitmentTypeIndication's Qualifiers elements XML content. Index value could be omitted for the first CommitmentTypeIndication element.

CustomTrustedLists: Specifies the custom TrustedLists.

Use this property to specify the custom TSLs (Trust Service status Lists) to the validator. The URLs list is comma-separated.

CustomTSLs: Specifies the custom TrustedLists.

Use this property to specify the custom TSLs (Trust Service status Lists) to the validator. The URLs list is comma-separated.

DataObjectFormatCount: The number of the DataObjectFormat elements.

Returns the number of the xades:DataObjectFormat elements available.

DataObjectFormatDescription[Index]: Specifies the DataObjectFormat's Description.

This property contains textual information related to the signed data object in the DataObjectFormat's Description element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatEncoding[Index]: Specifies the DataObjectFormat's Encoding.

This property contains an indication of the encoding format of the signed data object in the DataObjectFormat's Encoding element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatMimeType[Index]: Specifies the DataObjectFormat's MimeType.

This property contains an indication of the MIME type of the signed data object in the DataObjectFormat's MimeType element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifier[Index]: Specifies the DataObjectFormat's ObjectIdentifier's Identifier.

This property contains an identifier indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's Identifier element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifierDescription[Index]: Specifies the DataObjectFormat's ObjectIdentifier's Description.

This property contains an identifier's description indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's Description element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifierDocumentationReferences[Index]: Specifies the DataObjectFormat's ObjectIdentifier's DocumentationReferences.

This property contains an identifier's documentation references indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's DocumentationReferences element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifierQualifier[Index]: Specifies the DataObjectFormat's ObjectIdentifier's IdentifierQualifier.

This property contains an identifier qualifier indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's IdentifierQualifier element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectReference[Index]: Specifies the DataObjectFormat's ObjectReference.

This property contains the DataObjectFormat's ObjectReference element that reference the ds:Reference element of the ds:Signature corresponding with the data object qualified by this property.

For example, if the corresponding ds:Reference element has an Id "reference-id-1", then you should set this property to "#reference-id-1" value.

Index value could be omitted for the first DataObjectFormat element.

DeltaCRLPreference: Specifies whether complete or delta CRLs are preferred.

Use this setting to specify which CRL type should be preferred during revocation checks performed by the AdES component.

The default value is dcrlpPreferComplete (1).

Supported values:

dcrlpPreferDelta (0): retrieve and use delta CRLs when available, falling back to complete CRLs when needed.
dcrlpPreferComplete (1): try complete CRLs first, and use delta CRLs only if complete CRLs cannot be retrieved.

DislikeOpenEndedOCSPs: Tells the struct to discourage OCSP responses without an explicit NextUpdate parameter.

When this property is set to True, the validation engine treats OCSP response without a NextUpdate field as 'substandard' and tries to obtain some further revocation material for the certificate in question (a different OCSP or a CRL, even if the struct is configured to prefer the OCSP route). This is to work around Adobe Reader's intolerance to such OCSPs when classifying signed documents as LTV (as of August 2022).

EvaluateSystemTrust: Enables or disables usage of the platform's built-in trust validation facilities.

When enabled, the component delegates the certificate chain validation to the operating system's native trust evaluation mechanism (e.g. SecTrustEvaluate on Apple platforms). This functionality is currently available on macOS and iOS systems only. This property is disabled by default, because enabling it may prevent the AdES components from collecting full revocation information required for long-term validation (LTV) signatures.

EvaluateSystemTrustForSelfSignedCertificates: Enables or disables usage of the platform's built-in trust validation facilities for self-signed certificates.

When enabled, the component delegates the certificate chain validation to the operating system's native trust evaluation mechanism (e.g. SecTrustEvaluate on Apple platforms) for self-signed certificates. This functionality is currently available on macOS and iOS systems only. This property is enabled by default.

EvaluateSystemTrustForSSL: Enables or disables usage of the platform's built-in trust validation facilities for SSL/TLS.

When enabled, the component delegates the certificate chain validation to the operating system's native trust evaluation mechanism (e.g. SecTrustEvaluate on Apple platforms) specifically for SSL/TLS certificates. This functionality is currently available on macOS and iOS systems only. This property is enabled by default.

ExclusiveCanonicalizationPrefix: Specifies the exclusive canonicalization prefix.

Specifies the prefix for the ec:InclusiveNamespaces element for the exclusive canonicalization.

Default value is "ec". In this case "ec:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

ForceCompleteChainValidation: Whether to check the CA certificates when the signing certificate is invalid.

Set this property to True to check issuer (CA) certificates if the signing or an intermediate chain certificate is invalid.

ForceCompleteChainValidationForTrusted: Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.

Set this property to True to enable full chain validation for explicitly trusted intermediary or end-entity certificates. This may be useful when creating signatures to enforce completeness of the collected revocation information. It often makes sense to set this property to false when validating signatures to reduce validation time and avoid issues with badly configured environments.

GracePeriod: Specifies a grace period to apply during revocation information checks.

Use this property to specify a grace period (in seconds). Grace period applies to certain subprotocols, such as OCSP, and caters to the inaccuracy and/or missynchronization of clocks on different participating systems. Any time deviations within the grace period will be tolerated.

HMACKey: The key value for HMAC.

Use this property to set the HMAC key. The component uses base16 (hex) encoding for this configuration value.

HMACOutputLength: Sets the length of the HMAC output.

Use this property to configure the length of the HMAC output, in bytes.

HMACSigningUsed: Whether to use HMAC signing.

Set this property to true to make the component perform signing using HMAC method, rather than asymmetric cryptography. TBD

IgnoreChainLoops: Whether chain loops should be ignored.

Set this property to True to make the validation engine ignore chain loops. This may be an option when you need to process chains from buggy CAs that happen to include subchains that sign themselves.

IgnoreChainValidationErrors: Whether to ignore any certificate chain validation issues.

Enable this property to ignore any chain validation errors when creating a signature. This may be useful if the signature is created in an environment which uses different trust settings to the validation environment.

IgnoreOCSPNoCheckExtension: Whether the OCSP NoCheck extension should be ignored.

Set this property to True to make the validation engine ignore the OCSP no-check extension. You would normally need to set this property when validating severely non-compliant chains that misuse the extension, causing chain loops or other validation issues.

IgnoreSystemTrust: Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the struct should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the struct should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as the trusted_certificates property) are considered trusted.

IgnoreTimestampFailure: Whether to ignore time-stamping failure during signing.

If this property is set to True, any failure during time-stamping process will be ignored.

ImplicitlyTrustSelfSignedCertificates: Whether to trust self-signed certificates.

Set this property to True to implicitly trust all self-signed certificates. Use it with care as trusting just about every self-signed certificate is unwise. One exceptional reason where this property may be handy is where a chain is validated in an environment that is not supposed to trust it (for example, a signing, rather than verifying environment, or a QA server). Trusting all self-signing certificates (which are normally trusted) allows emulating the verifying environment without actually changing its security settings.

IncludeKnownRevocationInfoToSignature: Whether to include custom revocation info to the signature.

This property specifies whether revocation pieces provided via KnownCertificates, KnownCRLs, and KnownOCSPs properties should be included into the signature. This property lets you include custom validation elements to the signature in addition to the ones comprising the signing chain.

InclusiveNamespacesPrefixList: Specifies the InclusiveNamespaces PrefixList.

Use this property to read/specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of SignedInfo element. See XML-Signature Syntax and Processing specification for details.

KeyInfoID: Specifies the ID for KeyInfo element.

This property contains the identifier (ID) attribute of the ds:KeyInfo element.

KeyName: Contains information about the key used for signing.

The KeyName element contains a string value (with significant whitespaces) which may be used by the signer to communicate a key identifier to the recipient. Typically, the KeyName element contains an identifier related to the key pair used to sign the message, but it may contain other protocol-related information that indirectly identifies a key pair. Common uses of the KeyName include simple string names for keys, a key index, a distinguished name (DN), an email address, etc.

Overwrite: Forcefully overwrite OutputFile if it exists.

Enable this setting to make the component overwrite the specified output file if it already exists on disk. This setting only applies to the ASiC output (the OutputFile property) and not to extracted archived files. Use the OnFileExtractionStart event to control overwriting behaviour for extracted files.

PolicyDescription: signature policy description.

This property specifies the Description of the signature policy.

PolicyExplicitText: The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified.

PolicyUNNumbers: The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES.

PolicyUNOrganization: The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES.

ProductionPlace: Identifies the place of the signature production.

The signature production place in JSON format that was included or to be included into the signature.

Sample value: '{"addressCountry": "UK", "addressLocality": "London", "postalCode": "N1 7GU", "streetAddress": "20-22 Wenlock Road"}'

PromoteLongOCSPResponses: Whether long OCSP responses are requested.

Set this property to True to force the struct to publish the 'long' form of OCSP responses. Otherwise, only BasicOCSPResponse blobs are promoted.

PSSUsed: Whether to use RSASSA-PSS algorithm.

Although the RSASSA-PSS algorithm provides better security than a classic RSA scheme (PKCS#1-1.5), please take into account that RSASSA-PSS is a relatively new algorithm which may not be understood by older implementations. This is an alias for UsePSS.

QualifyingPropertiesID: Specifies the ID for QualifyingProperties element.

This property contains the identifier (ID) attribute of the xades:QualifyingProperties element.

QualifyingPropertiesObjectID: Specifies the ID for object with QualifyingProperties element.

This property contains the identifier (ID) attribute of the ds:Object element that contains xades:QualifyingProperties element.

QualifyingPropertiesReferenceCount: The number of the QualifyingPropertiesReference elements.

Returns the number of the xades:QualifyingPropertiesReference elements available.

QualifyingPropertiesReferenceID[Index]: Specifies the QualifyingPropertiesReference's ID.

This property contains an identifier (ID) attribute of the xades:QualifyingPropertiesReference element. Index value could be omitted for the first QualifyingPropertiesReference element.

QualifyingPropertiesReferenceURI[Index]: Specifies the QualifyingPropertiesReference's URI.

This property contains an URI attribute of the xades:QualifyingPropertiesReference element. Index value could be omitted for the first QualifyingPropertiesReference element.

RefsTimestampType: Specifies references timestamp type to include to the signature.

Contains a comma-separated list of values that specifies which references timestamp type to include to the signature when signature upgraded to XAdES-X or XAdES-E-X form.

Supported values are:


SigAndRefs		SigAndRefs timestamp
RefsOnly		RefsOnly timestamp

RevocationCacheAgePolicy: Specifies a preset policy for cached CRL and OCSP response freshness settings.

Use this setting to configure all cached revocation freshness settings at once. The default value is Default.

Supported values are case-insensitive:


Default	Applies the AdES default freshness settings: crl:86400;50;600,ocsp:3600;50;600. This means: CRL maximum age 1 day, CRL age ratio 50%, CRL overlap 10 minutes; OCSP response maximum age 1 hour, OCSP response age ratio 50%, OCSP response overlap 10 minutes. This value is the default.
Disabled	Sets CachedCRLOverlapTime, CachedOCSPResponseOverlapTime, CachedCRLMaxAge, CachedOCSPResponseMaxAge, CachedCRLMaxAgeRatio, and CachedOCSPResponseMaxAgeRatio to 0. It only disables the cache-age freshness policy; it does not disable revocation checking or use of the revocation cache.
Short	Uses crl:43200;50;300,ocsp:1800;50;300. This means: CRL maximum age 12 hours, CRL age ratio 50%, CRL overlap 5 minutes; OCSP response maximum age 30 minutes, OCSP response age ratio 50%, OCSP response overlap 5 minutes.
Long	Uses crl:518400;50;3600,ocsp:21600;50;3600. This means: CRL maximum age 6 days, CRL age ratio 50%, CRL overlap 1 hour; OCSP response maximum age 6 hours, OCSP response age ratio 50%, OCSP response overlap 1 hour.
N	Interprets N as an integer number of seconds. The overlap settings are set to N seconds, CRL maximum age is set to N * 144, OCSP response maximum age is set to N * 6, and both ratio settings are set to 50.
crl:<maxAge>;<ratio>;<overlap>,ocsp:<maxAge>;<ratio>;<overlap>	Sets the CRL and OCSP response freshness values explicitly.

Ratios must be in the 0..100 range. Maximum age and overlap values must be non-negative. Short and Long are time-scale profiles: Long allows older cached revocation information by increasing maximum ages, but also uses a larger pre-expiry safety margin by increasing overlap times. For individual CachedCRLOverlapTime, CachedOCSPResponseOverlapTime, CachedCRLMaxAge, CachedOCSPResponseMaxAge, CachedCRLMaxAgeRatio, and CachedOCSPResponseMaxAgeRatio settings, a value of 0 disables the corresponding freshness check. The individual settings remain available for advanced configuration and can be used after this setting to override specific values.

SchemeParams: The algorithm scheme parameters to employ.

Use this property to specify the parameters of the algorithm scheme if needed.

This setting is used to provide parameters for some cryptographic schemes. Use the Name1=Value1;Name2=Value2;... syntax to encode the parameters. For example: Scheme=PSS;SaltSize=32;TrailerField=1.

SignatureID: Specifies the ID for Signature element.

This property contains the identifier (ID) attribute of the ds:Signature element.

SignaturePrefix: Specifies the signature prefix.

Specifies the prefix for the Signature elements.

Default value is "ds". In this case "ds:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

SignatureValueID: Specifies the ID for SignatureValue element.

This property contains the identifier (ID) attribute of the ds:SignatureValue element.

SignedInfoID: Specifies the ID for SignedInfo element.

This property contains the identifier (ID) attribute of the ds:SignedInfo element.

SignedPropertiesID: Specifies the ID for SignedProperties element.

This property contains the identifier (ID) attribute of the xades:SignedProperties element.

SignedPropertiesReferenceCanonicalizationMethod: Specifies the canonicalization method used in SignedProperties reference.

Use this property to specify the canonicalization method for the canonicalization transform of the ds:Reference element that points to xades:SignedProperties element. Use cxcmNone value to not to include canonicalization transform in transform chain.


cxcmNone	`0`
cxcmCanon	`1`
cxcmCanonComment	`2`
cxcmExclCanon	`3`
cxcmExclCanonComment	`4`
cxcmMinCanon	`5`
cxcmCanon_v1_1	`6`
cxcmCanonComment_v1_1	`7`

SignedPropertiesReferenceHashAlgorithm: Specifies the hash algorithm used in SignedProperties reference.

Use this property to specify the hash algorithm to be used for the ds:Reference element that points to xades:SignedProperties element.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

The default value is empty string, in this case, the hash algorithm specified in hash_algorithm property is used.

SignedPropertiesReferenceID: Specifies the ID for Reference element that points to SignedProperties element.

This property contains the identifier (ID) attribute of the ds:Reference element that points to xades:SignedProperties element.

SignedPropertiesReferenceInclusiveNamespacesPrefixList: Specifies the InclusiveNamespaces PrefixList used in SignedProperties reference.

Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the ds:Reference element that points to xades:SignedProperties element.

SignedPropertiesReferenceIndex: Specifies the index of SignedProperties reference.

Use this property to specify the reference's index for the ds:Reference element that points to xades:SignedProperties element.

SignedSignaturePropertiesID: Specifies the ID for SignedSignatureProperties element.

This property contains the identifier (ID) attribute of the xades:SignedSignatureProperties element.

SigningCertificatesChain: Specifies which certificates from SigningChain are included in the xades:SigningCertificate element.

Use this property to get or set the list of indices (relative to the signing_chain property) of the certificates to include in the xades:SigningCertificate element. The value may also be the keywords none (include none) or all (include the entire chain). The default is all.

SigningCertificatesHashAlgorithm: Specifies the hash algorithm used for SigningCertificates.

Use this property to specify the hash algorithm to be used for xades:SigningCertificates element.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

The default value is empty string, in this case, the hash algorithm specified in hash_algorithm property is used.

SigningTimeFormat: Specifies the date time format for the XAdES signing time.

This property contains the date time format for the XAdES signing time (xades:SigningTime element under xades:SignedSignatureProperties).

Supported values:


YYYY		Year (e.g. 1997)
YYYY-MM		Year and month (e.g. 1997-07)
YYYY-MM-DD		Complete date (e.g. 1997-07-16)
YYYY-MM-DDThh:mmTZD		Complete date plus hours and minutes (e.g. 1997-07-16T19:20+01:00)
YYYY-MM-DDThh:mm:ssTZD		Complete date plus hours, minutes and seconds (e.g. 1997-07-16T20:20:30Z)
YYYY-MM-DDThh:mm:ss.sTZD		Complete date plus hours, minutes, seconds and a decimal fraction of a second (e.g. 1997-07-16T20:20:30.4Z)
YYYY-MM-DDThh:mm:ss.sssTZD		Default. Complete date plus hours, minutes, seconds and a fraction of a second (e.g. 1997-07-16T20:20:30.451Z)

SigningTimeIsUTC: Specifies whether the XAdES signing time is in UTC.

This property controls how the value provided by new_sig_claimed_signing_time is interpreted and serialized into the XAdES signing time (xades:SigningTime element under xades:SignedSignatureProperties).

Behavior:


"true"		Default. The provided time is interpreted as UTC. If SigningTimeZoneOffset is non-zero, the time is converted to the corresponding local time (UTC plus the offset) and serialized with that offset; otherwise it is serialized as UTC.
"false"		The provided time is interpreted as local time. No clock-time adjustment is performed. The value is serialized as local time; if SigningTimeZoneOffset is non-zero, the specified offset is included.

SigningTimeZoneOffset: Specifies the time zone offset for the XAdES signing time.

This property contains the time zone offset in minutes for the XAdES signing time (xades:SigningTime element under xades:SignedSignatureProperties).

SigPolicyDescription: signature policy description.

This property specifies the Description of the signature policy (an alias for PolicyDescription).

SigPolicyExplicitText: The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified (an alias for PolicyExplicitText);

SigPolicyHash: The EPES policy hash.

Use this configuration setting to provide the EPES policy hash.

SigPolicyHashAlgorithm: The hash algorithm that was used to generate the EPES policy hash.

Use this setting to provide the hash algorithm that was used to generate the policy hash.

SigPolicyID: The EPES policy ID.

The EPES signature policy identifier, in dotted OID format (1.2.3.4.5).

SigPolicyNoticeNumbers: The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNNumbers).

SigPolicyNoticeOrganization: The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNOrganization).

SigPolicyURI: The EPES policy URI.

Assign the EPES policy URI to this setting.

TempPath: Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored. This setting is supported only in the Java edition for all applicable signing components except PDFSigner, where this limitation does not apply.

TimestampCanonicalizationMethod: Specifies canonicalization method used in timestamp.

Use this property to specify the canonicalization method used in timestamp.


cxcmNone	`0`
cxcmCanon	`1`
cxcmCanonComment	`2`
cxcmExclCanon	`3`
cxcmExclCanonComment	`4`
cxcmMinCanon	`5`
cxcmCanon_v1_1	`6`
cxcmCanonComment_v1_1	`7`

TimestampResponse: A base16-encoded timestamp response received from a TSA.

When using virtual:// timestamp endpoints, assign this property in your on_notification event handler with the TSP response that you receive from the TSA. Remember to encode the response in hex (base16).

TimestampValidationDataDetails: Specifies timestamp validation data details to include to the signature.

Contains a comma-separated list of values that specifies which validation data values details to include to the signature when xades:TimeStampValidationData element added.

Supported values are:


certificate		Base64-encoded [X509v3] certificates
crl		Base64-encoded certificate revocation lists (CRL)
ocsp		OCSP responses

TLSChainValidationDetails: Contains the advanced details of the TLS server certificate validation.

Check this property in the TLSCertValidate event handler to access the TLS certificate validation details.

TLSChainValidationResult: Contains the result of the TLS server certificate validation.

Check this property in the TLSCertValidate event handler to obtain the TLS certificate validation result.

TLSClientAuthRequested: Indicates whether the TLS server requests client authentication.

Check this property in the TLSCertValidate event handler to find out whether the TLS server requests the client to provide the authentication certificate. If this property is set to true, provide your certificate via the TLSClientChain property. Note that the struct may fire this event more than once during each operation, as more than one TLS-enabled server may need to be contacted.

TLSValidationLog: Contains the log of the TLS server certificate validation.

Check this property in the TLSCertValidate event handler to retrieve the validation log of the TLS server.

TolerateMinorChainIssues: Whether to tolerate minor chain issues.

This parameter controls whether the chain validator should tolerate minor technical issues when validating the chain. Those are:

CA, revocation source, TLS key usage requirements are not mandated
Violation of OCSP issuer requirements are ignored
The AuthorityKeyID extension in CRL- and certificate-issuing CAs are ignored (helps with incorrectly renewed certificates)
Basic constraints and name constraints of CA certificates are ignored
Some weaker algorithms are tolerated

TspAttemptCount: Specifies the number of timestamping request attempts.

Use this property to specify a number of timestamping request attempts.

In case of a timestamping failure, provide new TSA and HTTP settings inside the on_notification event handler ('BeforeTimestamp' and 'TimestampError' event IDs).

TspHashAlgorithm: Sets a specific hash algorithm for use with the timestamping service.

In default configuration struct uses the 'SHA256' hash algorithm. Use this property to specify a different hash algorithm for the timestamp.

Note: Unlike other structs, PDFSigner struct uses the same hash algorithm for the main signature and any associated timestamps during signing. Use this property to specify a different hash algorithm for the timestamp.

TspReqPolicy: Sets a request policy ID to include in the timestamping request.

Use this property to provide a specific request policy OID to include in the timestamping request. Use the standard human-readable OID notation (1.2.3.4.5).

UseDefaultTrustedLists: Enables or disables the use of the default TrustedLists.

Use this property to tell the validator to use (or not to use) the default TSLs (Trust Service status Lists).

The following default TSLs are used: EU (European Union) LOTL (list of trusted lists).

UseDefaultTSLs: Enables or disables the use of the default TrustedLists.

Use this property to tell the validator to use (or not to use) the default TSLs (Trust Service status Lists).

The following default TSLs are used: EU (European Union) LOTL (list of trusted lists).

UseEnvStorages: Enables or disables use of the environment storages.

Enable this property to make the chain validation module automatically look up missing CA and intermediate certificates in the environment storages.

UseHMACSigning: Whether to use HMAC signing.

Set this property to true to make the component perform signing using HMAC method, rather than asymmetric cryptography.

UseMicrosoftCTL: Enables or disables the automatic use of the Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UsePSS: Whether to use RSASSA-PSS algorithm.

UseSystemCertificates: Enables or disables the use of the system certificates.

Use this property to tell the chain validation module to automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

UseUTF8Filenames: Specifies whether to use UTF-8 filenames.

Set this property to False to use system encoding for filenames inside container.

UseValidationCache: Enables or disable the use of the product-wide certificate chain validation cache.

Use this property to enable or disable the use of the global chain validation cache. If enabled, the struct will consult the product-wide validation cache when validating the signing chains. Also, the outcomes of any new chain validations performed by the struct, both interim and final, will be saved in the cache and available for re-use by any future validations. Disable this property to ignore the cache and always perform the validation from a fresh start.

UseValidatorSettingsForTLSValidation: Whether to employ the primary chain validator setup for auxiliary TLS chain validations.

Use this property to specify whether you would like to use the primary (AdES) chain validator component to validate TLS chains for any connections involved (OCSP, CRL).

ValidationDataRefsDetails: Specifies validation data references details to include to the signature.

Contains a comma-separated list of values that specifies which validation data references details to include to the signature when signature upgraded to XAdES-C or XAdES-E-C form.

Supported values are:


certificate		References to X.509 certificates
crl		References to certificate revocation lists (CRL)
ocsp		References to OCSP responses

ValidationDataRefsHashAlgorithm: Specifies the hash algorithm used in validation data references.

Use this property to specify the hash algorithm used to compute hashes for validation data references.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

The default value is empty string, in this case, the hash algorithm specified in hash_algorithm property is used.

ValidationDataValuesDetails: Specifies validation data values details to include to the signature.

Contains a comma-separated list of values that specifies which validation data values details to include to the signature when signature upgraded to XAdES-X-L or XAdES-E-X-L form.

Supported values are:


certificate		Base64-encoded [X509v3] certificates
crl		Base64-encoded certificate revocation lists (CRL)
ocsp		OCSP responses

XAdESPrefix: Specifies the XAdES prefix.

Specifies the prefix for the XAdES elements.

Default value is "xades". In this case "xades:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

XAdESv141Prefix: Specifies the XAdES v1.4.1 prefix.

Specifies the prefix for the XAdES v1.4.1 elements.

Default value is "xadesv141". In this case "xadesv141:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

Base Config Settings

ASN1UseGlobalTagCache: Controls whether ASN.1 module should use a global object cache.

This is a performance setting. It is unlikely that you will ever need to adjust it.

AssignSystemSmartCardPins: Specifies whether CSP-level PINs should be assigned to CNG keys.

This is a low-level tweak for certain cryptographic providers. It is unlikely that you will ever need to adjust it.

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the struct.

Supported values are:


off		No caching (default)
local		Local caching
global		Global caching

Cookies: Gets or sets local cookies for the struct.

Use this property to get cookies from the internal cookie storage of the struct and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

DNSLocalSuffix: The suffix to assign for TLD names.

Use this global setting to adjust the default suffix to assign to top-level domain names. The default is .local.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

EnableSSHMLKEM: Enables support for ML-KEM/hybrid key exchange algorithms in SSH client and server components.

Use this setting to enable hybrid key exchange algorithms in client and server SSH and SFTP components. This is a global setting that enables ML-KEM blanketly in all SSH-dependent components.

EnableTLSMLKEM: Enables support for ML-KEM and hybrid groups in TLS client and server components.

Use this setting to enable ML-KEM and hybrid key exchange groups in client and server TLS components. This is a global setting that enables ML-KEM blanketly in all TLS-dependent components.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the structs that have its CookieCaching property set to "global".

HardwareCryptoUsePolicy: The hardware crypto usage policy.

This global setting controls the hardware cryptography usage policy.

Supported Values:


auto	Use hardware cryptography if available; otherwise, fall back to software-based cryptography (default).
enable	Always attempt to use hardware cryptography. If unavailable, exception will be thrown.
disable	Do not use hardware cryptography.

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other structs.

HttpVersion: The HTTP version to use in any inner HTTP client components created.

Set this property to 1.0 or 1.1 to indicate the HTTP version that any internal HTTP clients should use.

IgnoreExpiredMSCTLSigningCert: Whether to tolerate the expired Windows Update signing certificate.

It is not uncommon for Microsoft Windows Update Certificate Trust List to be signed with an expired Microsoft certificate. Setting this global property to true makes SBB ignore the expired factor and take the Trust List into account.

ListDelimiter: The delimiter character for multi-element lists.

Allows to set the delimiter for any multi-entry values returned by the component as a string object, such as file lists. For most of the components, this property is set to a newline sequence.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

OldClientSideRSAFallback: Specifies whether the SSH client should use a SHA1 fallback.

Tells the SSH client to use a legacy ssh-rsa authentication even if the server indicates support for newer algorithms, such as rsa-sha-256. This is a backward-compatibility tweak.

PKICache: Specifies which PKI elements (certificates, CRLs, OCSP responses) should be cached.

The PKICache setting specifies which Public Key Infrastructure (PKI) elements should be cached to optimize performance and reduce retrieval times. It supports comma-separated values to indicate the specific types of PKI data that should be cached.

Supported Values:


certificate	Enables caching of certificates.
crl	Enables caching of Certificate Revocation Lists (CRLs).
ocsp	Enables caching of OCSP (Online Certificate Status Protocol) responses.

Example (default value): PKICache=certificate,crl,ocsp In this example, the component caches certificates, CRLs, and OCSP responses.

PKICachePath: Specifies the file system path where cached PKI data is stored.

The PKICachePath setting defines the file system path where cached PKI data (e.g., certificates, CRLs, OCSP responses and Trusted Lists) will be stored. This allows the system to persistently save and retrieve PKI cache data, even across application restarts.

The default value is an empty string - no cached PKI data is stored on disk.

Example: PKICachePath=C:\Temp\cache In this example, the cached PKI data is stored in the C:\Temp\cache directory.

ProductVersion: Returns the version of the SecureBlackbox library.

This property returns the long version string of the SecureBlackbox library being used (major.minor.build.revision).

ServerSSLDHKeyLength: Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the struct. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the struct) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are divided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the struct is set to "local", the property returns/restores the rules from/to the internal storage of the struct. If StaticDNS of the struct is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of cached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the structs.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseCRLObjectCaching: Specifies whether reuse of loaded CRL objects is enabled.

This setting enables or disables the caching of CRL objects. When set to true (the default value), the system checks if a CRL object is already loaded in memory before attempting to load a new instance. If the object is found, the existing instance is reused, and its reference count is incremented to track its usage. When the reference count reaches zero, indicating that no references to the object remain, the system will free the object from memory. This setting enhances performance by minimizing unnecessary object instantiation and promotes efficient memory management, particularly in scenarios where CRL objects are frequently used.

UseInternalRandom: Switches between SecureBlackbox-own and platform PRNGs.

Allows to switch between internal/native PRNG implementation and the one provided by the platform.

UseLegacyAdESValidation: Enables legacy AdES validation mode.

Use this setting to switch the AdES component to the validation approach that was used in SBB 2020/SBB 2022 (less attention to temporal details).

UseOCSPResponseObjectCaching: Specifies whether reuse of loaded OCSP response objects is enabled.

This setting enables or disables the caching of OCSP response objects. When set to true (the default value), the system checks if a OCSP response object is already loaded in memory before attempting to load a new instance. If the object is found, the existing instance is reused, and its reference count is incremented to track its usage. When the reference count reaches zero, indicating that no references to the object remain, the system will free the object from memory. This setting enhances performance by minimizing unnecessary object instantiation and promotes efficient memory management, particularly in scenarios where OCSP response objects are frequently used.

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemNativeSizeCalculation: An internal CryptoAPI access tweak.

This is an internal setting. Please do not use it unless instructed by the support team.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

XMLRDNDescriptorName[OID]: Defines an OID mapping to descriptor names for the certificate's IssuerRDN or SubjectRDN.

This property defines custom mappings between Object Identifiers (OIDs) and descriptor names. This mapping specifies how the certificate's issuer and subject information (ds:IssuerRDN and ds:SubjectRDN elements respectively) are represented in XML signatures.

The property accepts comma-separated values where the first descriptor name is used when the OID is mapped, and subsequent values act as aliases for parsing.

Syntax: Config("XMLRDNDescriptorName[OID]=PrimaryName,Alias1,Alias2");

Where:

OID: The Object Identifier from the certificate's IssuerRDN or SubjectRDN that you want to map.

PrimaryName: The main descriptor name used in the XML signature when the OID is encountered.

Alias1, Alias2, ...: Optional alternative names recognized during parsing.

Usage Examples:

Map OID 2.5.4.5 to SERIALNUMBER: Config("XMLRDNDescriptorName[2.5.4.5]=SERIALNUMBER");

Map OID 1.2.840.113549.1.9.1 to E, with aliases EMAIL and EMAILADDRESS: Config("XMLRDNDescriptorName[1.2.840.113549.1.9.1]=E,EMAIL,EMAILADDRESS");

XMLRDNDescriptorPriority[OID]: Specifies the priority of descriptor names associated with a specific OID.

This property specifies the priority of descriptor names associated with a specific OID that allows to reorder descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during signing.

XMLRDNDescriptorReverseOrder: Specifies whether to reverse the order of descriptors in RDN.

Specifies whether to reverse the order of descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during XML signing. By default, this property is set to true (as specified in RFC 2253, 2.1).

XMLRDNDescriptorSeparator: Specifies the separator used between descriptors in RDN.

Specifies the separator used between descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during XML signing. By default, this property is set to ", " value.

Trappable Errors (ASiCVerifier Struct)

ASiCVerifier Errors

1048577	Invalid parameter (`SB_ERROR_INVALID_PARAMETER`)
1048578	Invalid configuration (`SB_ERROR_INVALID_SETUP`)
1048579	Invalid state (`SB_ERROR_INVALID_STATE`)
1048580	Invalid value (`SB_ERROR_INVALID_VALUE`)
1048581	Private key not found (`SB_ERROR_NO_PRIVATE_KEY`)
1048582	Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
1048583	The file was not found (`SB_ERROR_NO_SUCH_FILE`)
1048584	Unsupported feature or operation (`SB_ERROR_UNSUPPORTED_FEATURE`)
1048585	General error (`SB_ERROR_GENERAL_ERROR`)
16777217	Unsupported level (`SB_ERROR_ASIC_UNSUPPORTED_LEVEL`)
16777219	Unsupported signature type (`SB_ERROR_ASIC_UNSUPPORTED_SIGNATURE_TYPE`)
16777220	Unsupported extraction mode (`SB_ERROR_ASIC_UNSUPPORTED_EXTRACTION_MODE`)
16777221	The input file does not exist (`SB_ERROR_ASIC_INPUTFILE_NOT_EXISTS`)
16777222	The output file with this name already exists (`SB_ERROR_ASIC_OUTPUTFILE_ALREADY_EXISTS`)
16777223	The document has already been signed once during this session (`SB_ERROR_ASIC_CONTAINER_SIGNED`)
16777224	The document is not signed (`SB_ERROR_ASIC_CONTAINER_NOT_SIGNED`)