SMIMEEmail Task

Properties   Config Settings  

The SMIMEEmail Component adds S/MIME-protected email capability to the SSIS Package.

Remarks

The SMIMEEmail Task adds support for sending and receiving S/MIME-protected emails to BizTalk Server. The task allows you to encrypt and sign emails before sending and decrypt and verify signatures on received emails.

SMIMEEmail Receiver Task

The SMIMEEmail Receiver task is the S/MIME enabled equivalent of the Email Receive task. In addition to standard IMAP and POP3 functions, the SMIMEEmail Receiver task can decrypt and/or verify message signatures. In order to use the SMIMEEmail Receiver task, you must first select a ServerType. You must also enter a MailServer and User. For servers that require authentication, you will also have to enter a Password. To activate SSL, you must also set the SSLAcceptServerCert and SSLStartMode. The adapter will attempt to determine the correct port to connect to based on the server type and SSL settings. However, you may override the default by directly setting the MailPort in the property pages.

Once you have your port set up, the task will connect to the server once every PollingInterval and download messages. To control how the messages are downloaded, or to prevent duplicate messages from being fetched from the mail server, you may set the DeleteMode to an appropriate value. For IMAP connections, you may also set a Filter.

The task will populate the MessageList property with the information retrieved from the downloaded emails.

When it receives an email, the SMIMEEmail Reciever task will detect if the message is encrypted and attempt to decrypt it using the certificate in the Certificate property. If the message is signed, it will also attempt to verify the signature using the certificate in the SignerCert property.

SMIMEEmail Sender Task

The SMIMEEmail Sender Task is a complete SMTP client that can also encrypt and sign emails. To send emails from the task you must set at a minimum your SMTPServer, as well as your From and SendTo email addresses. Should you need to guarantee a secure transmission, you may set the SSLCert and SSLStartMode properties, as well as a specific SSLAcceptServerCert.

You may also add carbon copy and blind carbon copy recipients via the Cc and BCc properties. If you wish to receive delivery or read notifications, you can set the DeliveryReceipt and ReadReceipt properties. You may set the Subject of your message. The contents of the outbound message will be sent as the body of the email.

If you want to encrypt an email you are sending, set the RecipientCert property to the receiver's certificate, set the EncryptData property to true, and set EncryptingAlgorithm to the encryption algorithm you want to use. To sign an email, set the Certificate property to your certificate, set the SignData property to true, and set the SigningAlgorithm property to the hash algorithm you want to use for signing.

Receiver Property List


The following is the full list of the properties of the receiver task with short descriptions. Click on the links for further details.

AttachmentDirectorySpecifies the directory to which attachments are saved.
AuthModeThe authentication mode to be used when connecting to the MailServer .
CertificateThe Certificate used to sign (Encoder) and decrypt (Decoder) messages.
DeleteControls if the email is deleted after download.
FilterA filter to be applied to the inbox when selecting messages.
FirewallA set of properties related to firewall access.
IncludeHeadersInstructs the component to include or ignore message headers.
LogFileThe file to write logging information to at runtime.
LogModeWhat information gets logged during component execution.
MailFolderName of the mailbox selected on the server.
MailPortThe port of the mail server (IMAP or POP3).
MailServerThe name or address of the mail server (IMAP or POP3).
MessageListString denoting the name of the variable which contains the last message listing entries.
OAuthAuthorizationOAuth Authorization Information.
OperationThe operation which will be executed by the Email task.
OtherDefines a set of configuration settings to be used by the component.
PasswordA password for login.
PersistentConnectionInstructs the component whether to keep the connection to the server open.
RequireEncryptionWhether an error should be thrown if a received message is not encrypted.
RequireOAEPWhether an error should be thrown if OAEP was not used to encrypt the incoming message.
RequirePSSWhether an error should be thrown if RSA-PSS was not used to encrypt the incoming message.
RequireSignatureWhether an error should be thrown if a received message is not signed.
RolloverCertificateThe rollover decryption certificate.
RuntimeLicenseSpecifies the component runtime license key.
ServerTypeThe type of server for your email account.
SignerCertContains the certificate of the message signer.
SSLAcceptServerCertInstructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLAcceptServerCertAcceptAnyTells the component to accept any server certificate.
SSLCertThe certificate to use for client authentication during the SSL handshake.
SSLStartModeDetermines how the component starts the SSL negotiation.
TempPathThe path to which temporary files are written at runtime.
TimeoutA timeout for the component.
UserA user id for login.

Sender Property List


The following is the full list of the properties of the sender task with short descriptions. Click on the links for further details.

AttachmentsSpecifies which files the component should include as attachments in the outgoing message.
AuthModeThe authentication mode to be used when connecting to the MailServer .
BCcA comma separated list of addresses for blind carbon copies (optional).
CcA comma separated list of addresses for carbon copies (optional).
CertificateThe Certificate used to sign (Encoder) and decrypt (Decoder) messages.
DeliveryReceiptWhether or not a delivery receipt should be returned to the sender.
EncryptDataWhether to encrypt the MIME data.
EncryptingAlgorithmThe algorithm to use for encryption.
FirewallA set of properties related to firewall access.
FromThe email address of the sender (required).
IncludeCertificateSpecifies whether to include the signer's certificate with the signed message.
IncludeChainSpecifies whether to include the signer's certificate chain with the signed message.
LogFileThe file to write logging information to at runtime.
LogModeWhat information gets logged during component execution.
MessageHeadersMessage headers associated with the current email message.
MessageHTMLThe HTML text of the message.
MessageTextThe text of the mail message (optional).
OAuthAuthorizationOAuth Authorization Information.
OtherDefines a set of configuration settings to be used by the component.
PasswordA password for login.
PersistentConnectionInstructs the component whether to keep the connection to the server open.
ReadReceiptWhether or not a receipt should be sent when the email has been read.
RecipientCertThe certificate used to encrypt the MIME data.
ReplyToA mail address to reply to (optional).
RuntimeLicenseSpecifies the component runtime license key.
SendToA comma separated list of addresses for destinations (required).
SignDataWhether to sign the MIME data.
SigningAlgorithmTextual description of the signature hash algorithm.
SMTPMessageIdThe id of the mail message (optional).
SMTPPortThe server port for SMTP (default 25).
SMTPServerThe name or address of a mail server (mail relay).
SSLAcceptServerCertInstructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLAcceptServerCertAcceptAnyTells the component to accept any server certificate.
SSLCertThe certificate to use for client authentication during the SSL handshake.
SSLStartModeDetermines how the component starts the SSL negotiation.
SubjectThe subject of the mail message (optional).
TempPathThe path to which temporary files are written at runtime.
TimeoutA timeout for the component.
UseOAEPWhether to use OAEP when encrypting the MIME data.
UsePSSWhether to use RSA-PSS when signing.
UserA user id for login.

Config Settings


The following is a list of config settings for the task with short descriptions. Click on the links for further details.

AutoNormalizeLFWhether to automatically determine how to normalize the MIC when verifying a signature.
ContinueOnSMIMEErrorSpecifies whether further emails are processed after encountering an error.
SMIMECapabilitiesSpecifies the algorithms to include in the sMIMECapabilities object in the signature.
AddAttachmentsAsMessagePartsIncludes attachments as additional parts on the message.
AttachmentEncoding[index]Content-Transfer-Encoding for attached file (at index).
AttachmentName[index]Filename for the attached file (at index).
AttachmentNameSourceSpecifies the source location in the MIME entity from which the filename is retrieved.
AutoDecodeHeadersWhether to decode headers.
AutoDecodeMessageTextWhether to decode non-MIME message text.
DuplicateAttachmentActionSpecifies what action to take when a duplicate filename is encountered.
FoldHeadersWhether incoming message headers should be folded.
LogoffWhether or not to logoff from the server after execution.
MaskSensitiveWhether sensitive properties should be masked when logging.
MaxPartsThe maximum number of parts to be parsed from a mime message.
MessageHTMLFileSpecifies a file that will be included as the email's HTML content.
MoveToSpecifies the IMAP folder on the server to which messages will be moved.
ReturnOnlyPlainTextPartSpecifies if the component should return the first plain text part or the entire message.
ReturnPathSets the Return-Path to be used for sending email.
UIDModeIf True, permanent message identifiers will be used instead of temporary identifiers.
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLSecurityFlagsFlags that control certificate verification.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
LocalHostThe name of the local host or user-assigned IP interface through which connections are initiated or accepted.
TcpNoDelayWhether or not to delay when sending packets.
UseInternalSecurityAPIWhether or not to use the system security libraries or an internal implementation.

AttachmentDirectory Property (SMIMEEmail Task)

Specifies the directory to which attachments are saved.

Data Type

String

Default Value

""


Remarks

When retrieving messages from a mail server, this setting may be set to a full path to which attachments should be saved. For example "C:\download\attachments". This setting is valid only when receiving messages, and is supported when using both the IMAP and POP protocols. The DuplicateAttachmentAction will determine what happens if a file with the same name already exists.

This property is not available in the Sender.

Attachments Property (SMIMEEmail Task)

Specifies which files the component should include as attachments in the outgoing message.

Data Type

String

Default Value

""


Remarks

Attachments may be used when sending an email to specify which files will be included as attachments to the outgoing message.

The value should be a pipe ("|") -delimited sequence of one or more filenames. The filenames should be specified with paths if necessary, so that the files may be found on the local file system.

If this property is set to an empty string, no attachments will be included in the outgoing message.

This property is not available in the Receiver.

AuthMode Property (SMIMEEmail Task)

The authentication mode to be used when connecting to the MailServer .

Data Type

Enumeration

Possible Values

Login (0)
CRAMMD5 (1)
NTLM (2)
APOP (3)
SASLPlain (4)
XOAUTH2 (5)


Default Value

0


Remarks

The following authentication modes are supported by the Email task:

LoginThe User and Password are sent in a basic authentication command.
CRAMMD5The User and Password are digested using MD5 and sent to the server in a secure authentication command.
NTLMWindows NTLM authentication. If User and Password are not supplied, the credentials for the current Windows account are used.
APOPPOP authentication. This value is only valid for the Email receiver task when ServerType is set to POP3.
SASL PlainThe User and Password are concatenated into a plaintext SASL authentication command. This value is only valid for the Email receiver task when ServerType is set to IMAP.
XOAUTH2OAuth authentication. Use OAuthAuthorization to acquire and set an access token.

The default AuthMode is Login.

BCc Property (SMIMEEmail Task)

A comma separated list of addresses for blind carbon copies (optional).

Data Type

String

Default Value

""


Remarks

The BCc property specifies a comma separated list of destinations for blind carbon copies of the mail message. A copy of the message is sent to each destination, but no BCc SMTP header is created containing the destination addresses, so individual recipients never see the list of the other recipients.

The task will stop processing the message and log an error if the SMTPServer returns an error code about any email address specified in SendTo or Cc, but it will only log warnings if the same happens with an email address specified in BCc.

This property is not available in the Receiver.

Cc Property (SMIMEEmail Task)

A comma separated list of addresses for carbon copies (optional).

Data Type

String

Default Value

""


Remarks

The Cc property specifies a comma separated list of destinations for carbon copies of the mail message. A copy of the message is sent to each destination, and a Cc SMTP header is created containing the destination addresses. This header is sent to every recipient of the message. If you don't want to copy this information to every recipient, then use blind carbon copies instead (see the description of the BCc).

The task will stop processing the message and log an error if the SMTPServer returns an error code about any email address specified in SendTo or Cc, but it will only log warnings if the same happens with an email address specified in BCc.

This property is not available in the Receiver.

Certificate Property (SMIMEEmail Task)

The Certificate used to sign (Encoder) and decrypt (Decoder) messages.

Data Type

Certificate

Remarks

The task uses this certificate to sign MIME data when S/MIME encoding. This property is also used to decrypt S/MIME entities in the Decoder, and it should be set to the certificate that holds the private key that is paired with the public key that was used to encrypt the data.

Delete Property (SMIMEEmail Task)

Controls if the email is deleted after download.

Data Type

Boolean

Default Value

false


Remarks

If this property is set to True, each email is deleted from the server after download.

This property is not available in the Sender.

DeliveryReceipt Property (SMIMEEmail Task)

Whether or not a delivery receipt should be returned to the sender.

Data Type

Boolean

Default Value

false


Remarks

When set to True, a Return-Receipt-To header is added to the message. If the email recipient so chooses, a delivery receipt will be sent to the email address in the From property.

This property is not available in the Receiver.

EncryptData Property (SMIMEEmail Task)

Whether to encrypt the MIME data.

Data Type

Boolean

Default Value

true


Remarks

If false, the data will be encoded but not encrypted. The default is true.

This property is not available in the Receiver.

EncryptingAlgorithm Property (SMIMEEmail Task)

The algorithm to use for encryption.

Data Type

String

Default Value

"3DES"


Remarks

This property contains either the name of the algorithm (such as "RC2", "3DES", "DES", or "AES"), or an object identifier (OID) string representing the algorithm.

In the case of "RC2" ("RC2CBC") the key bit length is specified after the name. The following algorithm names are supported for RC2: "RC2CBC40", "RC2CBC64", and "RC2CBC128", with the default being 128 bit ("RC2CBC128").

In the case of "AES" ("AESCBC") the key bit length is specified after the name. The following algorithm names are supported for AES: "AESCBC128", "AESCBC192", and "AESCBC256", with the default being 128 bit ("AESCBC128").

When read, the value of the property always contains the OID of the algorithm, or an empty string if the algorithm is unknown.

This property is not available in the Receiver.

Filter Property (SMIMEEmail Task)

A filter to be applied to the inbox when selecting messages.

Data Type

String

Default Value

""


Remarks

If this value is set, the task will use it to filter out which messages to download from the server. The task will apply the filter as a search string, and then download all messages in the message set returned by the server.

Note: this property is only valid for the stIMAP ServerType.

The exact format of the filter criteria is specified by the IMAP RFCs. The string consists of one or more search keys and their corresponding values (if any) separated by spaces, for example: "SINCE 1-Feb-1994 NOT FROM Smith".

Possible search keys include:

<message set>Messages with message sequence numbers corresponding to the specified message sequence number set
ALLAll messages in the mailbox - this is the default initial key for AND-ing.
ANSWEREDMessages with the \Answered flag set.
BCC <string>Messages that contain the specified string in the envelope structure's BCC field.
BEFORE <date>Messages whose internal date is earlier than the specified date.
BODY <string> Messages that contain the specified string in the body of the message.
CC <string> Messages that contain the specified string in the envelope structure's CC field.
DELETED Messages with the \Deleted flag set.
DRAFT Messages with the \Draft flag set.
FLAGGED Messages with the \Flagged flag set.
FROM <string> Messages that contain the specified string in the envelope structure's FROM field.
HEADER <field-name> <string> Messages that have a header with the specified field-name (as defined in [RFC-822]) and that contains the specified string in the [RFC-822] field-body.
KEYWORD <flag> Messages with the specified keyword set.
LARGER <n> Messages with an RFC822.SIZE larger than the specified number of octets.
NEW Messages that have the \Recent flag set but not the \Seen flag. This is functionally equivalent to "(RECENT UNSEEN)".
NOT <search-key> Messages that do not match the specified search key.
OLD Messages that do not have the \Recent flag set. This is functionally equivalent to "NOT RECENT" (as opposed to "NOT NEW").
ON <date> Messages whose internal date is within the specified date.
OR <search-key1> <search-key2> Messages that match either search key.
RECENT Messages that have the \Recent flag set.
SEEN Messages that have the \Seen flag set.
SENTBEFORE <date> Messages whose [RFC-822] Date: header is earlier than the specified date.
SENTON <date> Messages whose [RFC-822] Date: header is within the specified date.
SENTSINCE <date> Messages whose [RFC-822] Date: header is within or later than the specified date.
SINCE <date> Messages whose internal date is within or later than the specified date.
SMALLER <n> Messages with an RFC822.SIZE smaller than the specified number of octets.
SUBJECT <string> Messages that contain the specified string in the envelope structure's SUBJECT field.
TEXT <string> Messages that contain the specified string in the header or body of the message.
TO <string> Messages that contain the specified string in the envelope structure's TO field.
UID <message set> Messages with unique identifiers corresponding to the specified unique identifier set.
UNANSWERED Messages that do not have the \Answered flag set.
UNDELETED Messages that do not have the \Deleted flag set.
UNDRAFT Messages that do not have the \Draft flag set.
UNFLAGGED Messages that do not have the \Flagged flag set.
UNKEYWORD <flag> Messages that do not have the specified keyword set.
UNSEEN Messages that do not have the \Seen flag set.

This property is not available in the Sender.

Firewall Property (SMIMEEmail Task)

A set of properties related to firewall access.

Data Type

Firewall

Remarks

This is a Firewall type property which contains fields describing the firewall through which the task will attempt to connect.

From Property (SMIMEEmail Task)

The email address of the sender (required).

Data Type

String

Default Value

""


Remarks

The From property is used to create a From SMTP header. This header identifies the sender of the message. A valid email address is required. Examples of valid addresses are: "Friendly Name" <address@company.com> or address@company.com

This property is not available in the Receiver.

IncludeCertificate Property (SMIMEEmail Task)

Specifies whether to include the signer's certificate with the signed message.

Data Type

Boolean

Default Value

true


Remarks

If true, the certificate used to sign the message will be encoded and included in the message signature.

Including a certificate is the preferred method of building signed messages. If you do not include a certificate, the message recipient may not be able to verify the sender's signature.

This property is not available in the Receiver.

IncludeChain Property (SMIMEEmail Task)

Specifies whether to include the signer's certificate chain with the signed message.

Data Type

Boolean

Default Value

false


Remarks

If this property is set to True, the entire certificate's chain that was used to sign the message will be encoded and included in the message signature.

NOTE: To include the chain, the IncludeCertificate property must also be set to true.

This property is not available in the Receiver.

IncludeHeaders Property (SMIMEEmail Task)

Instructs the component to include or ignore message headers.

Data Type

Boolean

Default Value

false


Remarks

If IncludeHeaders is set to True, the task will include any headers retrieved from the server in the message. This is useful for PassThrough configurations and for orchestrations that use MIME decoding message pipelines.

Note: regardless of the value of this property, there will be a "MessageHeaders" field of MessageList that contains a string with the full RFC-822 encoded original headers as retrieved from the server. This is useful for situations where it is necessary to find specific mail headers.

This property is not available in the Sender.

LogFile Property (SMIMEEmail Task)

The file to write logging information to at runtime.

Data Type

String

Default Value

""


Remarks

To write logging information to a file instead of using the task's logging API, set this property to a valid file on disk.

When set, any logging information is appended to the specified file and not written to the task's logging API.

LogMode Property (SMIMEEmail Task)

What information gets logged during component execution.

Data Type

Enumeration

Possible Values

Verbose (0)
Info (1)
Warning (2)
Error (3)
Fatal (4)


Default Value

3


Remarks

This property controls what information the task logs. The possible values have the following affect on the task's behavior:

VerboseThe task will report all information regarding the transport.
InfoThe task will report all major operations, as well as all warnings and errors.
WarningThe task will report any conditions that could result in unpredictable behavior as well as errors.
ErrorThe task will report all errors that prevent normal operations from completing.
FatalThe task will report only serious errors that cause the task to completely stop functioning.

MailFolder Property (SMIMEEmail Task)

Name of the mailbox selected on the server.

Data Type

String

Default Value

"Inbox"


Remarks

This property tells the task which mailbox folder to check for messages when logging into an IMAP email account.

Note: this property is only valid when ServerType is set to IMAP.

This property is not available in the Sender.

MailPort Property (SMIMEEmail Task)

The port of the mail server (IMAP or POP3).

Data Type

Integer

Default Value

0


Remarks

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is established by the task

For IMAP, the default ports are 143 for a plaintext connection and 993 for an implicit SSL connection. For POP3, the default ports are 110 and 995 respectively.

This property is not available in the Sender.

MailServer Property (SMIMEEmail Task)

The name or address of the mail server (IMAP or POP3).

Data Type

String

Default Value

""


Remarks

The MailServer property specifies the IP address (IP number in dotted internet format) or Domain Name of the mail server.

This property is not available in the Sender.

MessageHeaders Property (SMIMEEmail Task)

Message headers associated with the current email message.

Data Type

String

Default Value

""


Remarks

In the Send Task, this property applies to outgoing messages. Normally, the Email task will generate a set of headers to be transferred to the server along with the current mail message. However, this set of headers can be modified at runtime by setting this property. Several headers may be supplied as one string, with each header value terminated by a carriage return and new line ("\r\n", or VBCrLf) in accordance with RFC 822 format, but need not be folded.

Note: If any headers are supplied that would normally be generated by the task, the task will use the values specified.

In the Receive Task, this property will contain the headers of the message that was retrieved from the server.

This property is not available in the Receiver.

MessageHTML Property (SMIMEEmail Task)

The HTML text of the message.

Data Type

String

Default Value

""


Remarks

The MessageHTML property contains the HTML version of the message. When this property is set, the task will send the email as an HTML encoded message.

This property is not available in the Receiver.

MessageList Property (SMIMEEmail Task)

String denoting the name of the variable which contains the last message listing entries.

Data Type

String

Default Value

"<none>"


Remarks

The MessageList property contains the name of a variable which stores messages that are received from the server.

The variable is in the form of a datatable. The table's rows represent a message, and the columns represent a different property of the message. The columns of the datatable are listed below:

(0) MessageTextThe body of the retrieved message.
(1) MessageSubjectThe subject of the message.
(2) MessageHeadersRFC822-encoded headers of the message.
(3) MessageDateThe date/time stamp when the message was sent.
(4) MessageSizeThe size of the message.
(5) MessageFromThe address of the author of the message.
(6) MessageToComma separated list of direct recipients of the message.
(7) MessageCcA comma separated list of addresses for carbon copies of the message.
(8) MessageIdThe Id of the message.

This property is not available in the Sender.

MessageText Property (SMIMEEmail Task)

The text of the mail message (optional).

Data Type

String

Default Value

""


Remarks

The string in MessageText is sent as the text of the message.

This property is not available in the Receiver.

OAuthAuthorization Property (SMIMEEmail Task)

OAuth Authorization Information.

Data Type

OAuthAuthorizationParam

Remarks

This property holds details about the OAuth authorization. This includes the following fields:

Operation Property (SMIMEEmail Task)

The operation which will be executed by the Email task.

Data Type

Enumeration

Possible Values

Receive Messages (0)
List Messages (1)


Default Value

0


Remarks

There are two different operations that the Email Receive task may perform. It may download messages, or ask the server to return a listing of messages without downloading the entire message.

The default for this property is to receive messages.

This property is not available in the Sender.

Other Property (SMIMEEmail Task)

Defines a set of configuration settings to be used by the component.

Data Type

String

Default Value

""


Remarks

The task accepts one or more configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the task, access to these internal properties is provided through the Other property.

The Other property may be set to one or more configuration settings (name/value pairs). Set one setting per line. For example: configname1=value1 configname2=value2

Password Property (SMIMEEmail Task)

A password for login.

Data Type

Password

Default Value

""


Remarks

If the Password property is set to a non-empty string, then when connecting to the mail server an AUTH or CRAM-MD5 (depending on the value of AuthMode) command is sent in order to provide authentication information for the user.

PersistentConnection Property (SMIMEEmail Task)

Instructs the component whether to keep the connection to the server open.

Data Type

Boolean

Default Value

false


Remarks

If set to true, the task will first attempt to use an existing connection. If no such connection exists, it will create a new connection. When the task completes, it will persist the connection so that the task will reuse it during the next polling interval. Setting this property to true can improve performance if you are polling very frequently.

Set the Logoff configuration to tell the task to logoff from the persisted connection after completion.

ReadReceipt Property (SMIMEEmail Task)

Whether or not a receipt should be sent when the email has been read.

Data Type

Boolean

Default Value

false


Remarks

When set, a Disposition-Notification-To header is added to the message. If the email recipient so chooses, a receipt will be sent to the email address in the From property.

This property is not available in the Receiver.

RecipientCert Property (SMIMEEmail Task)

The certificate used to encrypt the MIME data.

Data Type

Certificate

Remarks

The task uses the recipient's certificate to encrypt the MIME data so that it can be decrypted once it reaches the recipient. This property should be set to the appropriate certificate for encryption.

This property is not available in the Receiver.

ReplyTo Property (SMIMEEmail Task)

A mail address to reply to (optional).

Data Type

String

Default Value

""


Remarks

If the ReplyTo property contains a non-empty string, a Reply-To SMTP header is created for the message. This header shows the address to use for replies (useful if this address is different from the one in From).

This property is not available in the Receiver.

RequireEncryption Property (SMIMEEmail Task)

Whether an error should be thrown if a received message is not encrypted.

Data Type

Boolean

Default Value

false


Remarks

By default, if the adapter receives a message that is not encrypted it will skip the decryption step and continue processing the message. If RequireEncryption is set to true, an error will be thrown if a received message is not encrypted.

This property is not available in the Sender.

RequireOAEP Property (SMIMEEmail Task)

Whether an error should be thrown if OAEP was not used to encrypt the incoming message.

Data Type

Boolean

Default Value

false


Remarks

By default, the task will silently support decrypting messages regardless of whether they were encrypted with Optimal Asymmetric Encryption Padding (OAEP). If OAEP should be required, and thus an error should be thrown if OAEP is not detected, set this property to true.

This property is not available in the Sender.

RequirePSS Property (SMIMEEmail Task)

Whether an error should be thrown if RSA-PSS was not used to encrypt the incoming message.

Data Type

Boolean

Default Value

false


Remarks

By default, the task will silently support decrypting and verifying messages regardless of whether they were signed with RSA Probabilistic Signature Scheme (RSA-PSS). If RSA-PSS should be required, and thus an error should be thrown if RSA-PSS is not detected, set this property to true.

This property is not available in the Sender.

RequireSignature Property (SMIMEEmail Task)

Whether an error should be thrown if a received message is not signed.

Data Type

Boolean

Default Value

false


Remarks

By default, if the adapter receives an unsigned message it will skip the signature verification step and continue processing the message. If RequireSignature is set to true, an error will be thrown if the received message is not signed.

This property is not available in the Sender.

RolloverCertificate Property (SMIMEEmail Task)

The rollover decryption certificate.

Data Type

Certificate

Remarks

The rollover digital certificate that the task will use to decrypt incoming messages. This may be used to specify an additional decryption certificate during a period of transition between private certificates. When specified, the task will be able to decrypt messages that were encrypted with the corresponding public certificate of either Certificate or RolloverCertificate.

RolloverCertificate must be set to a private key certificate.

This property is not available in the Sender.

RuntimeLicense Property (SMIMEEmail Task)

Specifies the component runtime license key.

Data Type

String

Default Value

""


Remarks

You can use the RuntimeLicense property to set the runtime key for the task license.

SendTo Property (SMIMEEmail Task)

A comma separated list of addresses for destinations (required).

Data Type

String

Default Value

""


Remarks

The SendTo property specifies a comma separated list of destinations for the mail message. A copy of the message is sent to each of them, and a To SMTP header is created containing the destination addresses.

Examples of valid addresses are: "Friendly Name" <address@company.com> or address@company.com

The task will stop processing the message and log an error if the SMTPServer returns an error code about any email address specified in SendTo or Cc, but it will only log warnings if the same happens with an email address specified in BCc.

This property is not available in the Receiver.

ServerType Property (SMIMEEmail Task)

The type of server for your email account.

Data Type

Enumeration

Possible Values

IMAP (0)
POP3 (1)


Default Value

0


Remarks

This represents the type of server from which the task will download emails.

This property is not available in the Sender.

SignData Property (SMIMEEmail Task)

Whether to sign the MIME data.

Data Type

Boolean

Default Value

false


Remarks

If true, the certificate held in the Certificate property will be used to sign the message.

This property is not available in the Receiver.

SignerCert Property (SMIMEEmail Task)

Contains the certificate of the message signer.

Data Type

Certificate

Remarks

This certificate is used to verify the signature on the incoming message. Setting this property is only necessary if the message does not have the signer's certificate attached to it.

This property is not available in the Sender.

SigningAlgorithm Property (SMIMEEmail Task)

Textual description of the signature hash algorithm.

Data Type

String

Default Value

"SHA256"


Remarks

This property specifies the hash algorithm used to prepare the message digest for signature.

This property must contain either the name of the algorithm (such as "MD5" or "SHA1"), or an object id (OID) string representing the hash algorithm. Possible values are:

  • sha1
  • md5
  • sha-256 (default)
  • sha-384
  • sha-512
  • sha-224

When read, the value of the property always contains the OID of the algorithm, or an empty string if the algorithm is unknown.

This property is not available in the Receiver.

SMTPMessageId Property (SMIMEEmail Task)

The id of the mail message (optional).

Data Type

String

Default Value

""


Remarks

This property is used to specify the value of the SMTP MessageId header in the outgoing message. When this property is not set, the task will automatically calculate the MessageId. It is recommended that this property be left blank to allow the task to automatically create the MessageId value unless there is a specific need to define this value.

This property is not available in the Receiver.

SMTPPort Property (SMIMEEmail Task)

The server port for SMTP (default 25).

Data Type

Integer

Default Value

25


Remarks

A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is established by the task

For implicit SSL, use port 465 (please refer to the SSLStartMode property for more information).

This property is not available in the Receiver.

SMTPServer Property (SMIMEEmail Task)

The name or address of a mail server (mail relay).

Data Type

String

Default Value

""


Remarks

The SMTPServer property specifies the IP address (IP number in dotted internet format) or Domain Name for a mail relay through which messages will be routed.

The current version of the task does not provide a default value for the mail relay. You must provide a host name yourself. Generally, any internet host with an SMTP server will suffice (a UNIX host for example), but it is preferable to select an SMTPServer that is close to the machine sending mail.

This property is not available in the Receiver.

SSLAcceptServerCert Property (SMIMEEmail Task)

Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.

Data Type

Certificate

Remarks

If it finds any issues with the certificate presented by the server, the task will normally terminate the connection with an error. You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

This property is used to set a Public Key Certificate.

Ordinarily, the system will attempt to locate the public key in trusted certificate stores in the system registry. If a match is found, the certificate is trusted, and the process proceeds without error. If the certificate is not trusted, the task will report an error.

You may explicitly set a public key, either to accept a key that is not installed on the system, or to ensure that a specific key is presented. Public key certificates may be loaded from the machine registry or from file. If you click on the ellipses, a certificate selection dialog will open. To select a public key from the system registry, select the System Store tab or the User Store tab, and highlight the appropriate registry store. The list of available certificates will be shown below.

Alternatively, you may specify a public key on file. Select the PEM or Certificate File tabs to load a public key from file. You can use the browse button to examine the file system for the certificate that you wish to use. Public keys typically are stored in .CER, .DER, or .PEM files, but other formats may be used. You can click on the Open button to examine the contents of the certificate. Or, if you have a certificate stored in memory, you can write the contents of the certificate into the text box provided. Note that if you are loading a certificate from memory, the certificate must be Base-64 encoded, or the string representation of the certificate may become corrupted and uninterpretable.

Regardless of how you selected the certificate, once you hit the OK button, the task will attempt to verify that certificate selection. If successful, the subject of the certificate will be displayed in the property field. If the task was not able to verify the selection, a dialog box will appear instead detailing the verification error.

Note: You may also set SSLAcceptServerCertAcceptAny to True without opening the certificate selection dialog to force the task to unilaterally authenticate any server during the security handshake. It is strongly recommended that you use this only for testing purposes.

SSLAcceptServerCertAcceptAny Property (SMIMEEmail Task)

Tells the component to accept any server certificate.

Data Type

Boolean

Default Value

false


Remarks

When set to true, the task will unilaterally authenticate any server during the security handshake. It is strongly recommended that you use this only for testing purposes.

SSLCert Property (SMIMEEmail Task)

The certificate to use for client authentication during the SSL handshake.

Data Type

Certificate

Remarks

This property is used to assign a specific certificate for SSL client authentication.

This field is used to set a Private Key Certificate.

Private key certificates may be loaded from the registry, from files in PKCS#12 format, or from a PEM file format. If you click on the ellipses, a certificate selection dialog will open. To select a private key from the system registry, select the System Store tab or the User Store tab, and highlight the appropriate registry store. The list of certificates which have private keys will be shown below.

To select a private key certificate from a file in PKCS#12 format, select the PFX Store tab. The browse button can be used to examine the file system for PKCS#12 (.pfx or .p12) certificates. If you wish to examine the certificate, provide the password in the field provided and click on the Open button to examine the file store for certificates present. To load a certificate from PEM files, select the PEM tab. Like the PFX file selection, you can specify the password and click the Open button to examine the certificates in the PEM store, or you may paste any PEM data stored in memory.

Regardless of how you selected the certificate, once you hit the OK button, the task will attempt to verify that certificate selection. If successful, the subject of the certificate will be displayed in the property field. If the task was not able to verify the selection, a dialog box will appear instead detailing the verification error.

SSLStartMode Property (SMIMEEmail Task)

Determines how the component starts the SSL negotiation.

Data Type

Enumeration

Possible Values

Automatic (0)
Implicit (1)
Explicit (2)
None (3)


Default Value

0


Remarks

The SSLStartMode property may have one of the following values:

AutomaticIf the remote port is set to the standard plaintext port of the protocol (where applicable), the task will behave the same as if SSLStartMode is set to Explicit. In all other cases, SSL negotiation will be implicit (Implicit).
ImplicitThe SSL negotiation will start immediately after the connection is established.
ExplicitThe task will first connect in plaintext, and then explicitly start SSL negotiation through a protocol command such as STARTTLS.
NoneNo SSL negotiation, no SSL security. All communication will be in plaintext mode.

Subject Property (SMIMEEmail Task)

The subject of the mail message (optional).

Data Type

String

Default Value

""


Remarks

The string in Subject is sent with a Subject SMTP header to the mail recipient.

This property is not available in the Receiver.

TempPath Property (SMIMEEmail Task)

The path to which temporary files are written at runtime.

Data Type

String

Default Value

""


Remarks

If you are planning on working with binary files or large files, it is recommended that you set a valid path for this property. When set to a valid path this property tells the task to use temp files when performing operations. If this is not set, all operations are done in memory and require that all input and output is in ASCII.

This property accepts the "%TEMP%" macro, which will be replaced with the default system temporary directory at runtime.

Timeout Property (SMIMEEmail Task)

A timeout for the component.

Data Type

Integer

Default Value

60


Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion, or an error condition is encountered.

If Timeout is set to a positive value, the task will wait for the operation to complete before returning control.

If Timeout expires, and the operation is not yet complete, the task fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when data is successfully sent or received.

Optionally, the behavior of the task may be changed to absolute timeouts, i.e. the task will wait for a maximum of Timeout seconds since the beginning of the operation, without extending the timeout period during communications.

This behavior is controlled by the AbsoluteTimeout configuration setting.

The default value for the Timeout property is 60 (seconds).

UseOAEP Property (SMIMEEmail Task)

Whether to use OAEP when encrypting the MIME data.

Data Type

Boolean

Default Value

false


Remarks

By default, the task will use PKCS1 when encrypting the message. To use Optimal Asymmetric Encryption Padding (OAEP) instead, set this property to true.

This property is not available in the Receiver.

UsePSS Property (SMIMEEmail Task)

Whether to use RSA-PSS when signing.

Data Type

Boolean

Default Value

false


Remarks

To use RSA Probabilistic Signature Scheme (RSA-PSS) when signing, set this property to true. Note that the certificate used to sign does not itself need to be signed with RSA-PSS; any valid RSA certificate may be used with this setting.

This property is not available in the Receiver.

User Property (SMIMEEmail Task)

A user id for login.

Data Type

String

Default Value

""


Remarks

If the User property is set to a non-empty string, then when connecting to the mail server an AUTH or CRAM-MD5 (depending on the value of AuthMode) command is sent in order to provide authentication information for the user.

NOTE: POP3 and IMAP servers typically require User to be set.

Certificate Type

The digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

Store
String

The name of the certificate store for the client certificate.

The StoreType field specifies the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field in order to specify client certificates. If Store has a value, and Subject is set, a search for a certificate is initiated. Please refer to the Subject field for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.
SPCSoftware publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

If the provider is OpenSSL, the certificate store is a file containing a certificate and a private key. This property must be set to the name of the file.

StoreType
CertStoreTypes

The type of certificate store for this certificate.

The task supports both public and private keys in a variety of formats. When the cstAuto value is used, the task will automatically determine the type. This field can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user.

Note: This store type is not available in Java.

1 (cstMachine)For Windows, this specifies that the certificate store is a machine store.

Note: This store type is not available in Java.

2 (cstPFXFile)The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates.

Note: This store type is only available in Java.

5 (cstJKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.

Note: this store type is only available in Java.

6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).

Note: This store type is only available in Java and .NET.

22 (cstBCFKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.

Note: This store type is only available in Java and .NET.

23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS#11 interface.

To use a security key, the necessary data must first be collected using the CERTMGR task. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN.

Code Example. SSH Authentication with Security Key: certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Firewall Type

The firewall the component will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall such as the firewall Host and the FirewallType.

Fields

Host
String

Name or IP address of firewall (optional). If a Host is given, requested connections will be authenticated through the specified firewall when connecting.

If the Host field is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the Host field is set to the corresponding address. If the search is not successful, an error is returned.

Password
String

A password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password fields are used to connect and authenticate to the given firewall. If the authentication fails, a trappable error is fired.

Port
Integer

The TCP port for the firewall Host. See the description of the Host field for details.

Note that the Port is set automatically when FirewallType is set to a valid value. See the description of the FirewallType field for details.

User
String

A user name if authentication is to be used connecting through a firewall. If the Host is specified, the User and Password fields are used to connect and authenticate to the given Firewall. If the authentication fails, a trappable error is fired.

OAuthAuthorizationParam Type

This type holds details of the OAuth authorization.

Remarks

This type holds details of the OAuth authorization.

Fields

TimeStamp
String

The timestamp of the OAuth authorization string.

This field holds the timestamp of when the AuthorizationString was retrieved. This is used in conjunction with ExpiresIn to calculate if refreshing the token is required. For more details see ExpiresIn.

This value should not be set manually.

Config Settings (SMIMEEmail Task)

The task accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the task, access to these internal properties is provided through the Other property.

SMIMEEMail Config Settings

AutoNormalizeLF:   Whether to automatically determine how to normalize the MIC when verifying a signature.

If set to False (default), the task will use "\n" as the line ending when normalizing the MIC to verify a signature. When set to true, if verification fails using "\n" the component will automatically try again using "\r\n".

This is only applicable when receiving.

ContinueOnSMIMEError:   Specifies whether further emails are processed after encountering an error.

If set, the task will throw a warning and skip any email it cannot process. This is False by default.

SMIMECapabilities:   Specifies the algorithms to include in the sMIMECapabilities object in the signature.

If set, the task will include the listed algorithms in the sMIMECapabilities object in the signature. By default this value is empty, and no sMIMECapabilities object will be included. This setting takes a string containing the object Ids of the algorithms to include, separated by a comma. Any parameters should be separated by a dash, like "1.2.840.113549.3.2,1.2.840.113549.3.4-64".

This is only applicable when sending.

Email Config Settings

AddAttachmentsAsMessageParts:   Includes attachments as additional parts on the message.

When retrieving messages from a mail server, this setting may be set to True to include incoming attachments as additional message parts. This setting is valid only when receiving messages, and is supported when using both the IMAP and POP protocols. If DuplicateAttachmentAction is set to "overwrite", an error will be thrown if there are duplicate attachments on the same email.

AttachmentEncoding[index]:   Content-Transfer-Encoding for attached file (at index).

This configuration setting allows you to set the Content-Transfer-Encoding for each attached file in the Attachments array property. Valid array indices are from 0 to AttachmentCount - 1. When set to one of the below integer values, the attachment will be encoded using the specified encoding. The following encodings are supported:

07-bit
1Quoted-Printable
2Base64
38-bit
AttachmentName[index]:   Filename for the attached file (at index).

This configuration setting allows you to set the filename for each attached file when IncludeAttachments is used. Valid array indices are from 0 to AttachmentCount - 1. An index of -1 can be used to set the filename to the same value for all potential attachments. To set the filename for the attachment at index 2, you would set the string "AttachmentName[2]=%SourceFileNameNoExt%.txt".

AttachmentNameSource:   Specifies the source location in the MIME entity from which the filename is retrieved.

When set to 0 (default), the task will use the usual header attributes to determine the filename of the attachment that is saved to disk. If these values are not present, the name attribute from the Content-Type header may be used by setting this configuration setting to 1. Note that use of the name attribute for Content-Type is deprecated, but this configuration setting is present to allow for backward compatibility. Possible value are:

0Auto (default)
1Auto including legacy attributes
AutoDecodeHeaders:   Whether to decode headers.

When retrieving messages from the server, this setting specifies whether headers are automatically decoded by the task. When IncludeHeaders is set to True this setting may also be set to False to ensure that the original header values are included without any processing applied. This is helpful in scenarios when further processing of the message is done outside of the task. The default value is True.

AutoDecodeMessageText:   Whether to decode non-MIME message text.

When retrieving non-MIME encoded messages from the server, this setting specifies whether encoded messages (e.g., Base64 encoded message) are automatically decoded by the task. This configuration option is only valid for messages that are not MIME encoded. The default value is False.

DuplicateAttachmentAction:   Specifies what action to take when a duplicate filename is encountered.

This setting determines what happens when AttachmentDirectory is set and a duplicate filename is encountered. Possible values are:

0Overwrite. The file is overwritten in the AttachmentDirectory.
1 (default)Rename. The file is renamed so both files are kept.
The default value is 1 (Rename). With that setting the filename will include text indicating it is a duplicate. For instance "test.txt" would be renamed to "test-duplicate-1.txt" in the event of a filename conflict. If set to 0 (Overwrite) the previous file will be overwritten.
FoldHeaders:   Whether incoming message headers should be folded.

By default, when IncludeHeaders is true, the task will unfold headers so that each header is on a single line. To instruct the task to fold the headers, set this configuration setting to True. Folding the headers may resolve line-length issues if the header value is long.

This is only applicable when receiving. The default value is False.

Logoff:   Whether or not to logoff from the server after execution.

This configuration is only used when PersistentConnection has been set to true. Set this to true to tell the task to logoff from the persisted connection once execution completes.

The default for this configuration setting is false.

MaskSensitive:   Whether sensitive properties should be masked when logging.

By default, Verbose logging will include the raw commands sent to the mail server in plain text. To mask sensitive values such as passwords and prevent them from appearing in the log, set this option to True. The default value is true.

MaxParts:   The maximum number of parts to be parsed from a mime message.

This config should be set to limit the amount of parts that will be parsed from an email. By default, this value is 100. Therefore up to 100 parts (the body and 99 attachments) will be parsed from an email by default.

MessageHTMLFile:   Specifies a file that will be included as the email's HTML content.

This configuration setting can be used to specify a file that will be included in the HTML content of the email. If the MessageHTML property is also specified, the contents of the file will be included after the value in the MessageHTML property.

MoveTo:   Specifies the IMAP folder on the server to which messages will be moved.

If set, the task will move the downloaded messages to the folder specified. This is only applicable when ServerType is set to IMAP. Only successfully downloaded messages will be moved.

This is only applicable when receiving.

ReturnOnlyPlainTextPart:   Specifies if the task should return the first plain text part or the entire message.

If set to true the task will return only the first plain text part of a message. This is false by default. This is only applicable when receiving messages.

ReturnPath:   Sets the Return-Path to be used for sending email.

Setting this property sets the Return-Path to be used for sending email. If this is not set, the value in From is used.

This is only applicable when sending emails.

UIDMode:   If True, permanent message identifiers will be used instead of temporary identifiers.

When False, the IMAP server uses temporary message identifiers that are valid only during the current session. If this configuration setting is True (default), permanent message identifiers will be used instead.

The IMAP protocol operations where UID mode is used are the following: COPY, FETCH, STORE, SEARCH.

Note: This configuration setting only applies when ServerType is set to IMAP;

SSL Config Settings

ReuseSSLSession:   Determines if the SSL session is reused.

If set to true, the task will reuse the context if and only if the following criteria are met:

  • The target host name is the same.
  • The system cache entry has not expired (default timeout is 10 hours).
  • The application process that calls the function is the same.
  • The logon session is the same.
  • The instance of the task is the same.

SSLCipherStrength:   The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

SSLEnabledCipherSuites:   The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the task will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when UseInternalSecurityAPI is False (default): // The "Other" property could contain ONE of the following lines: SSLEnabledCipherSuites=* SSLEnabledCipherSuites=CALG_AES_256 SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES Possible values when UseInternalSecurityAPI is False (default) include:

  • CALG_3DES
  • CALG_3DES_112
  • CALG_AES
  • CALG_AES_128
  • CALG_AES_192
  • CALG_AES_256
  • CALG_AGREEDKEY_ANY
  • CALG_CYLINK_MEK
  • CALG_DES
  • CALG_DESX
  • CALG_DH_EPHEM
  • CALG_DH_SF
  • CALG_DSS_SIGN
  • CALG_ECDH
  • CALG_ECDH_EPHEM
  • CALG_ECDSA
  • CALG_ECMQV
  • CALG_HASH_REPLACE_OWF
  • CALG_HUGHES_MD5
  • CALG_HMAC
  • CALG_KEA_KEYX
  • CALG_MAC
  • CALG_MD2
  • CALG_MD4
  • CALG_MD5
  • CALG_NO_SIGN
  • CALG_OID_INFO_CNG_ONLY
  • CALG_OID_INFO_PARAMETERS
  • CALG_PCT1_MASTER
  • CALG_RC2
  • CALG_RC4
  • CALG_RC5
  • CALG_RSA_KEYX
  • CALG_RSA_SIGN
  • CALG_SCHANNEL_ENC_KEY
  • CALG_SCHANNEL_MAC_KEY
  • CALG_SCHANNEL_MASTER_HASH
  • CALG_SEAL
  • CALG_SHA
  • CALG_SHA1
  • CALG_SHA_256
  • CALG_SHA_384
  • CALG_SHA_512
  • CALG_SKIPJACK
  • CALG_SSL2_MASTER
  • CALG_SSL3_MASTER
  • CALG_SSL3_SHAMD5
  • CALG_TEK
  • CALG_TLS1_MASTER
  • CALG_TLS1PRF
Example values when UseInternalSecurityAPI is True: // The "Other" property could contain ONE of the following lines: SSLEnabledCipherSuites=* SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA Possible values when UseInternalSecurityAPI is True include:
  • TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
  • TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
  • TLS_DHE_DSS_WITH_DES_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
  • TLS_DHE_RSA_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_128_GCM_SHA256
  • TLS_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA
  • TLS_RSA_WITH_AES_256_CBC_SHA256
  • TLS_RSA_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_RC4_128_MD5
  • TLS_RSA_WITH_RC4_128_SHA

If SSLEnabledProtocols is configured to use TLS 1.3 the following values are supported:

  • TLS_AES_128_GCM_SHA256
  • TLS_AES_256_GCM_SHA384

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols:   Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

TLS1.312288 (Hex 3000) (Experimental)
TLS1.23072 (Hex C00) (Default)
TLS1.1768 (Hex 300) (Default)
TLS1 192 (Hex C0) (Default)
SSL3 48 (Hex 30)
SSL2 12 (Hex 0C)

Note: TLS 1.1 and TLS1.2 support are only available starting with Windows 7.

Note: Enabling TLS 1.3 will automatically set UseInternalSecurityAPI to True.

SSLIncludeCertChain:   Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the transport log contains the full certificate chain. By default this value is False and only the leaf certificate will be present.

If set to True all certificates returned by the server will be present in the transport log. This includes the leaf certificate, any intermediate certificate, and the root certificate.

Note: When UseInternalSecurityAPI is set to True this value is automatically set to True. This is needed for proper validation when using the internal provider.

SSLSecurityFlags:   Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

0x00000001Ignore time validity status of certificate.
0x00000002Ignore time validity status of CTL.
0x00000004Ignore non-nested certificate times.
0x00000010Allow unknown Certificate Authority.
0x00000020Ignore wrong certificate usage.
0x00000100Ignore unknown certificate revocation status.
0x00000200Ignore unknown CTL signer revocation status.
0x00000400Ignore unknown Certificate Authority revocation status.
0x00000800Ignore unknown Root revocation status.
0x00008000Allow test Root certificate.
0x00004000Trust test Root certificate.
0x80000000Ignore non-matching CN (certificate CN not-matching server name).

TLS12SignatureAlgorithms:   Defines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.

This setting specifies the allowed server certificate signature algorithms when UseInternalSecurityAPI is True and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the task will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the task will fail with an error.

The format of this value is a comma separated list of hash-signature combinations. For instance: // The "Other" could contain ALL of these lines: UseInternalSecurityAPI=true SSLEnabledProtocols=3072 TLS12SignatureAlgorithms=sha1-rsa,sha1-dsa,sha256-rsa,sha256-dsa The default value for this setting is "sha1-rsa,sha1-dsa,sha224-rsa,sha224-dsa,sha256-rsa,sha256-dsa,sha384-rsa,sha384-dsa,sha512-rsa,sha512-dsa".

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups:   The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and UseInternalSecurityAPI is set to True, the values refer to the supported groups for ECC. The following values are supported:

  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)

TLS13KeyShareGroups:   The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448"
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1"
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096"
  • "ffdhe_6144"
  • "ffdhe_8192"

TLS13SignatureAlgorithms:   The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

  • "rsa_pkcs1_sha256" (default)
  • "rsa_pkcs1_sha384" (default)
  • "rsa_pkcs1_sha512" (default)
The default value is rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.
TLS13SupportedGroups:   The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448" (default)
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096" (default)
  • "ffdhe_6144" (default)
  • "ffdhe_8192" (default)

General Config Settings

AbsoluteTimeout:   Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

LocalHost:   The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

The LocalHost configuration contains the name of the local host as obtained by the Gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the task initiate connections (or accept in the case of server tasks) only through that interface.

If the task is connected, the LocalHost configuration shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

TcpNoDelay:   Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseInternalSecurityAPI:   Whether or not to use the system security libraries or an internal implementation.

When set to False, the task will use the system security libraries by default to perform cryptographic functions where applicable. In this case, calls to unmanaged code will be made. In certain environments, this is not desirable. To use a completely managed security implementation, set this setting to True.

Setting this configuration setting to True tells the task to use the internal implementation instead of using the system security libraries.

On Windows, this setting is set to False by default. On Linux/macOS, this setting is set to True by default.

If using the .NET Standard Library, this setting will be True on all platforms. The .NET Standard library does not support using the system security libraries.

Note: This setting is static. The value set is applicable to all tasks used in the application.

When this value is set, the product's system dynamic link library (DLL) is no longer required as a reference, as all unmanaged code is stored in that file.