TCP Task

The TCP Component can be used to send data over TCP.

Remarks

The TCP Task can be used to send data over TCP.

TCP Send Adapter

The TCP Send Adapter provides a light-weight TCP client. To begin Server and Port must be specified.

Specify the data to be sent in DataToSend. Upon execution the task will connect to the server and send DataToSend. The adapter will then wait for the server to signal the end of the response by looking for ExpectedResponse in the returned value. When detected the execution will complete and the response will be available in the Response property.

Additional scripting properties BeforeSend and AfterSend provide additional flexibility allowing any number of commands and operations to be performed.

Sender Property List

The following is the full list of the properties of the sender task with short descriptions. Click on the links for further details.


AfterSend	A set of commands to be executed after DataToSend is sent.
BeforeSend	A set of Tcp commands to be executed before DataToSend is sent.
DataToSend	The data to be sent to the server.
ErrorOnTimeout	If enabled, reaching the timeout will not throw an error.
ExpectedResponse	The expected response.
ExpectedResponseExpression	A regular expression to match the response returned by the server.
Firewall	A set of properties related to firewall access.
LogFile	The file to write logging information to at runtime.
LogMode	What information gets logged during component execution.
Other	Defines a set of configuration settings to be used by the component.
Port	The remote port for the Server (default is 23).
Response	The response from server.
ResponseFile	A file to hold the response from server.
RuntimeLicense	Specifies the component runtime license key.
Server	The address of the Server.
SSLAcceptServerCert	Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLAcceptServerCertAcceptAny	Tells the component to accept any server certificate.
SSLCert	The certificate to use for client authentication during the SSL handshake.
SSLStartMode	Determines how the component starts the SSL negotiation.
Timeout	A timeout for the component.

Config Settings

The following is a list of config settings for the task with short descriptions. Click on the links for further details.


Logoff	Whether or not to logoff from the server after execution.
ReturnScriptResponse	Whether to include script output in response data.
UseMessageBody	Whether to use the BizTalk message body instead of the DataToSend property.
ReuseSSLSession	Determines if the SSL session is reused.
SSLCipherStrength	The minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuites	The cipher suite to be used in an SSL negotiation.
SSLEnabledProtocols	Used to enable/disable the supported security protocols.
SSLIncludeCertChain	Whether the entire certificate chain is included in the SSLServerAuthentication event.
SSLSecurityFlags	Flags that control certificate verification.
TLS12SignatureAlgorithms	Defines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.
TLS12SupportedGroups	The supported groups for ECC.
TLS13KeyShareGroups	The groups for which to pregenerate key shares.
TLS13SignatureAlgorithms	The allowed certificate signature algorithms.
TLS13SupportedGroups	The supported groups for (EC)DHE key exchange.
AbsoluteTimeout	Determines whether timeouts are inactivity timeouts or absolute timeouts.
LocalHost	The name of the local host or user-assigned IP interface through which connections are initiated or accepted.
TcpNoDelay	Whether or not to delay when sending packets.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

AfterSend Property (TCP Task)

A set of commands to be executed after DataToSend is sent.

Data Type

String

Default Value

Remarks

AfterSend is a script that is executed immediately following the execution of DataToSend.

Each line in the script is treated as a single command.

Valid additional scripting commands are listed below:


sendex Data [Response]	Sends Data to the server. If Response is not set, the task will wait for ExpectedResponse or ExpectedResponseExpression.
send Data	Sends Data to server and does not wait for a response.
wait ExpectedResponse	Waits for a server response that includes ExpectedResponse. If no matching response is received within Timeout seconds an error occurs.
sleep Time	Sleeps Time seconds.

Commands that include spaces should be surrounded with quotes. For instance: exec "echo hello" Quotes within a command do not need to be escaped. For instance: exec "echo hello "world"" Will send: echo hello "world"

The "\" character is the escape character. It is used with the special case of Cr and Lf characters. For instance: exec "pwd\r\n" Will send "pwd" followed by a CrLf sequence.

The "\" escape character is also used when specifying non-ASCII characters by passing Hex encoded values. For instance: exec "\7F" Will send the DEL control character.

BeforeSend Property (TCP Task)

A set of Tcp commands to be executed before DataToSend is sent.

Data Type

String

Default Value

Remarks

BeforeSend is a script that is executed immediately before executing DataToSend.

Each line in the script is treated as a single command.

Valid additional scripting commands are listed below:


sendex Data [Response]	Sends Data to the server. If Response is not set, the task will wait for ExpectedResponse or ExpectedResponseExpression.
send Data	Sends Data to server and does not wait for a response.
wait ExpectedResponse	Waits for a server response that includes ExpectedResponse. If no matching response is received within Timeout seconds an error occurs.
sleep Time	Sleeps Time seconds.

The "\" character is the escape character. It is used with the special case of Cr and Lf characters. For instance: exec "pwd\r\n" Will send "pwd" followed by a CrLf sequence.

The "\" escape character is also used when specifying non-ASCII characters by passing Hex encoded values. For instance: exec "\7F" Will send the DEL control character.

DataToSend Property (TCP Task)

The data to be sent to the server.

Data Type

String

Default Value

Remarks

This property specifies data which will be sent to the server. If the server requires the data to be terminated with any special character (like an end-of-line marker), it should be included in the value supplied here.

The "\" character is the escape character. It is used with the special case of Cr and Lf characters. For instance: exec "pwd\r\n" Will send "pwd" followed by a CrLf sequence.

The "\" escape character is also used when specifying non-ASCII characters by passing Hex encoded values. For instance: exec "\7F" Will send the DEL control character.

ErrorOnTimeout Property (TCP Task)

If enabled, reaching the timeout will not throw an error.

Data Type

Boolean

Default Value

true

Remarks

If ErrorOnTimeout is enabled, the task will not raise an error when the Timeout is reached and the ExpectedResponse or ExpectedResponseExpression specified has not been detected in the server output. Timeouts while opening the TCP connection itself will always cause an error even if ErrorOnTimeout is specified.

ExpectedResponse Property (TCP Task)

The expected response.

Data Type

String

Default Value

"\\r\\n"

Remarks

This property specifies the character sequence to wait for after sending DataToSend. The task will search the response for the value defined here to signal that the execution is complete. If the ExpectedResponse is not found within Timeout seconds an error occurs.

This value is case sensitive. The default value is "\r\n".

ExpectedResponseExpression Property (TCP Task)

A regular expression to match the response returned by the server.

Data Type

String

Default Value

Remarks

This property specifies a regular expression defining a pattern to wait for after sending DataToSend. The task will search the response for the a value matching the pattern defined here to signal that the execution is complete. If no matching response is found within Timeout seconds an error occurs.

Note: The value specified in ExpectedResponseExpression must be a properly formatted .NET regular expression.

Possible Values

Verbose (0)
Info (1)
Warning (2)
Error (3)
Fatal (4)

Default Value

Remarks

This property controls what information the task logs. The possible values have the following affect on the task's behavior:


Verbose	The task will report all information regarding the transport.
Info	The task will report all major operations, as well as all warnings and errors.
Warning	The task will report any conditions that could result in unpredictable behavior as well as errors.
Error	The task will report all errors that prevent normal operations from completing.
Fatal	The task will report only serious errors that cause the task to completely stop functioning.

Other Property (TCP Task)

Defines a set of configuration settings to be used by the component.

Data Type

String

Default Value

Remarks

The task accepts one or more configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the task, access to these internal properties is provided through the Other property.

The Other property may be set to one or more configuration settings (name/value pairs). Set one setting per line. For example: configname1=value1 configname2=value2

Port Property (TCP Task)

The remote port for the Server (default is 23).

Data Type

Integer

Default Value

Remarks

This property specifies the remote port of the TCP service to which the connection will be made.

If it finds any issues with the certificate presented by the server, the task will normally terminate the connection with an error. You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

This property is used to set a Public Key Certificate.

Ordinarily, the system will attempt to locate the public key in trusted certificate stores in the system registry. If a match is found, the certificate is trusted, and the process proceeds without error. If the certificate is not trusted, the task will report an error.

You may explicitly set a public key, either to accept a key that is not installed on the system, or to ensure that a specific key is presented. Public key certificates may be loaded from the machine registry or from file. If you click on the ellipses, a certificate selection dialog will open. To select a public key from the system registry, select the System Store tab or the User Store tab, and highlight the appropriate registry store. The list of available certificates will be shown below.

Alternatively, you may specify a public key on file. Select the PEM or Certificate File tabs to load a public key from file. You can use the browse button to examine the file system for the certificate that you wish to use. Public keys typically are stored in .CER, .DER, or .PEM files, but other formats may be used. You can click on the Open button to examine the contents of the certificate. Or, if you have a certificate stored in memory, you can write the contents of the certificate into the text box provided. Note that if you are loading a certificate from memory, the certificate must be Base-64 encoded, or the string representation of the certificate may become corrupted and uninterpretable.

Regardless of how you selected the certificate, once you hit the OK button, the task will attempt to verify that certificate selection. If successful, the subject of the certificate will be displayed in the property field. If the task was not able to verify the selection, a dialog box will appear instead detailing the verification error.

Note: You may also set SSLAcceptServerCertAcceptAny to True without opening the certificate selection dialog to force the task to unilaterally authenticate any server during the security handshake. It is strongly recommended that you use this only for testing purposes.

SSLAcceptServerCertAcceptAny Property (TCP Task)

Tells the component to accept any server certificate.

Data Type

Boolean

Default Value

false

Remarks

When set to true, the task will unilaterally authenticate any server during the security handshake. It is strongly recommended that you use this only for testing purposes.

SSLCert Property (TCP Task)

The certificate to use for client authentication during the SSL handshake.

Data Type

Certificate

Remarks

This property is used to assign a specific certificate for SSL client authentication.

This field is used to set a Private Key Certificate.

Private key certificates may be loaded from the registry, from files in PKCS#12 format, or from a PEM file format. If you click on the ellipses, a certificate selection dialog will open. To select a private key from the system registry, select the System Store tab or the User Store tab, and highlight the appropriate registry store. The list of certificates which have private keys will be shown below.

To select a private key certificate from a file in PKCS#12 format, select the PFX Store tab. The browse button can be used to examine the file system for PKCS#12 (.pfx or .p12) certificates. If you wish to examine the certificate, provide the password in the field provided and click on the Open button to examine the file store for certificates present. To load a certificate from PEM files, select the PEM tab. Like the PFX file selection, you can specify the password and click the Open button to examine the certificates in the PEM store, or you may paste any PEM data stored in memory.

SSLStartMode Property (TCP Task)

Determines how the component starts the SSL negotiation.

Data Type

Enumeration

Possible Values

Automatic (0)
Implicit (1)
Explicit (2)
None (3)

Default Value

Remarks

The SSLStartMode property may have one of the following values:


Automatic	If the remote port is set to the standard plaintext port of the protocol (where applicable), the task will behave the same as if SSLStartMode is set to Explicit. In all other cases, SSL negotiation will be implicit (Implicit).
Implicit	The SSL negotiation will start immediately after the connection is established.
Explicit	The task will first connect in plaintext, and then explicitly start SSL negotiation through a protocol command such as STARTTLS.
None (Default)	No SSL negotiation, no SSL security. All communication will be in plaintext mode.

The default value is None.

Timeout Property (TCP Task)

A timeout for the component.

Data Type

Integer

Default Value

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion, or an error condition is encountered.

If Timeout is set to a positive value, the task will wait for the operation to complete before returning control.

If Timeout expires, and the operation is not yet complete, the task fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when data is successfully sent or received.

Optionally, the behavior of the task may be changed to absolute timeouts, i.e. the task will wait for a maximum of Timeout seconds since the beginning of the operation, without extending the timeout period during communications.

This behavior is controlled by the AbsoluteTimeout configuration setting.

The default value for the Timeout property is 60 (seconds).

Certificate Type

The digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

Store
String

The name of the certificate store for the client certificate.

The StoreType field specifies the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field in order to specify client certificates. If Store has a value, and Subject is set, a search for a certificate is initiated. Please refer to the Subject field for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

If the provider is OpenSSL, the certificate store is a file containing a certificate and a private key. This property must be set to the name of the file.

StorePassword
String

If the certificate store is of a type that requires a password, this property is used to specify that password in order to open the certificate store.

StoreType
CertStoreTypes

The type of certificate store for this certificate.

The task supports both public and private keys in a variety of formats. When the cstAuto value is used, the task will automatically determine the type. This field can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: this store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CERTMGR task. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Subject
String

The subject of the certificate used for client authentication.

When this property is set, a search is performed in the current certificate store certificate with matching subject.

If an exact match is not found, the store is searched for subjects containing the value of the property.

When setting the property to a partial subject, CN= should be omitted. For example, the following code would find the certificate with subject CN=Test Certificate, OU=People, C=US

Example (Searching with partial subject)

Control.CertSubject = "Test"

If a match is not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

If a matching certificate is found, Subject is set to the full subject of the matching certificate.

Thumbprint
String (read-only)

The thumbprint of the certificate.

This field is used to specify the thumbprint of the certificate. When there are multiple certificates in the store that have the same subject, the thumbprint will be used to distinguish between them.

Firewall Type

The firewall the component will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall such as the firewall Host and the FirewallType.

Fields

AutoDetect
Boolean

Tells the task whether or not to automatically detect and use firewall system settings, if available.

FirewallType
FirewallTypes

Determines the type of firewall to connect through. The applicable values are the following:


fwNone (0)	No firewall (default setting).
fwTunnel (1)	Connect through a tunneling proxy. Port is set to 80.
fwSOCKS4 (2)	Connect through a SOCKS4 Proxy. Port is set to 1080.
fwSOCKS5 (3)	Connect through a SOCKS5 Proxy. Port is set to 1080.

Host
String

Name or IP address of firewall (optional). If a Host is given, requested connections will be authenticated through the specified firewall when connecting.

If the Host field is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the Host field is set to the corresponding address. If the search is not successful, an error is returned.

Password
String

A password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password fields are used to connect and authenticate to the given firewall. If the authentication fails, a trappable error is fired.

Port
Integer

The TCP port for the firewall Host. See the description of the Host field for details.

Note that the Port is set automatically when FirewallType is set to a valid value. See the description of the FirewallType field for details.

User
String

A user name if authentication is to be used connecting through a firewall. If the Host is specified, the User and Password fields are used to connect and authenticate to the given Firewall. If the authentication fails, a trappable error is fired.

Config Settings (TCP Task)

The task accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the task, access to these internal properties is provided through the Other property.

TCP Config Settings

Logoff: Whether or not to logoff from the server after execution.

This configuration is only used when PersistentConnection has been set to true. Set this to true to tell the task to logoff from the persisted connection once execution completes.

The default for this configuration setting is false.

ReturnScriptResponse: Whether to include script output in response data.

Whether to include the server responses from BeforeSend and AfterSend in the Response value. If set to True, any output returned by the server in response to commands in the scripting properties BeforeSend and AfterSend is included in Response. If set to False, any script output is ignored. The default value is False.

UseMessageBody: Whether to use the BizTalk message body instead of the DataToSend property.

When this configuration setting is enabled, the task will send the body of the BizTalk message instead of the value in the DataToSend property. Note that the message body will be sent as is with no encoding changes, so the message body must be formatted correctly before being passed to the TCP task.

SSL Config Settings

ReuseSSLSession: Determines if the SSL session is reused.

If set to true, the task will reuse the context if and only if the following criteria are met:

The target host name is the same.
The system cache entry has not expired (default timeout is 10 hours).
The application process that calls the function is the same.
The logon session is the same.
The instance of the task is the same.

SSLCipherStrength: The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

SSLEnabledCipherSuites: The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the task will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when UseInternalSecurityAPI is False (default): // The "Other" property could contain ONE of the following lines: SSLEnabledCipherSuites=* SSLEnabledCipherSuites=CALG_AES_256 SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES Possible values when UseInternalSecurityAPI is False (default) include:

CALG_3DES
CALG_3DES_112
CALG_AES
CALG_AES_128
CALG_AES_192
CALG_AES_256
CALG_AGREEDKEY_ANY
CALG_CYLINK_MEK
CALG_DES
CALG_DESX
CALG_DH_EPHEM
CALG_DH_SF
CALG_DSS_SIGN
CALG_ECDH
CALG_ECDH_EPHEM
CALG_ECDSA
CALG_ECMQV
CALG_HASH_REPLACE_OWF
CALG_HUGHES_MD5
CALG_HMAC
CALG_KEA_KEYX
CALG_MAC
CALG_MD2
CALG_MD4
CALG_MD5
CALG_NO_SIGN
CALG_OID_INFO_CNG_ONLY
CALG_OID_INFO_PARAMETERS
CALG_PCT1_MASTER
CALG_RC2
CALG_RC4
CALG_RC5
CALG_RSA_KEYX
CALG_RSA_SIGN
CALG_SCHANNEL_ENC_KEY
CALG_SCHANNEL_MAC_KEY
CALG_SCHANNEL_MASTER_HASH
CALG_SEAL
CALG_SHA
CALG_SHA1
CALG_SHA_256
CALG_SHA_384
CALG_SHA_512
CALG_SKIPJACK
CALG_SSL2_MASTER
CALG_SSL3_MASTER
CALG_SSL3_SHAMD5
CALG_TEK
CALG_TLS1_MASTER
CALG_TLS1PRF

Example values when UseInternalSecurityAPI is True:

// The "Other" property could contain ONE of the following lines:
SSLEnabledCipherSuites=*
SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA
SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA

Possible values when UseInternalSecurityAPI is True include:

TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
TLS_DHE_DSS_WITH_AES_256_CBC_SHA
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
TLS_DHE_DSS_WITH_DES_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
TLS_DHE_RSA_WITH_DES_CBC_SHA
TLS_RSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_128_GCM_SHA256
TLS_RSA_WITH_3DES_EDE_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_RSA_WITH_AES_128_CBC_SHA256
TLS_RSA_WITH_AES_256_CBC_SHA
TLS_RSA_WITH_AES_256_CBC_SHA256
TLS_RSA_WITH_DES_CBC_SHA
TLS_RSA_WITH_RC4_128_MD5
TLS_RSA_WITH_RC4_128_SHA

If SSLEnabledProtocols is configured to use TLS 1.3 the following values are supported:

TLS_AES_128_GCM_SHA256
TLS_AES_256_GCM_SHA384

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols: Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:


TLS1.3	12288 (Hex 3000) (Experimental)
TLS1.2	3072 (Hex C00) (Default)
TLS1.1	768 (Hex 300) (Default)
TLS1	192 (Hex C0) (Default)
SSL3	48 (Hex 30)
SSL2	12 (Hex 0C)

Note: TLS 1.1 and TLS1.2 support are only available starting with Windows 7.

Note: Enabling TLS 1.3 will automatically set UseInternalSecurityAPI to True.

SSLIncludeCertChain: Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the transport log contains the full certificate chain. By default this value is False and only the leaf certificate will be present.

If set to True all certificates returned by the server will be present in the transport log. This includes the leaf certificate, any intermediate certificate, and the root certificate.

Note: When UseInternalSecurityAPI is set to True this value is automatically set to True. This is needed for proper validation when using the internal provider.

SSLSecurityFlags: Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:


0x00000001	Ignore time validity status of certificate.
0x00000002	Ignore time validity status of CTL.
0x00000004	Ignore non-nested certificate times.
0x00000010	Allow unknown Certificate Authority.
0x00000020	Ignore wrong certificate usage.
0x00000100	Ignore unknown certificate revocation status.
0x00000200	Ignore unknown CTL signer revocation status.
0x00000400	Ignore unknown Certificate Authority revocation status.
0x00000800	Ignore unknown Root revocation status.
0x00008000	Allow test Root certificate.
0x00004000	Trust test Root certificate.
0x80000000	Ignore non-matching CN (certificate CN not-matching server name).

TLS12SignatureAlgorithms: Defines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.

This setting specifies the allowed server certificate signature algorithms when UseInternalSecurityAPI is True and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the task will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the task will fail with an error.

The format of this value is a comma separated list of hash-signature combinations. For instance: // The "Other" could contain ALL of these lines: UseInternalSecurityAPI=true SSLEnabledProtocols=3072 TLS12SignatureAlgorithms=sha1-rsa,sha1-dsa,sha256-rsa,sha256-dsa The default value for this setting is "sha1-rsa,sha1-dsa,sha224-rsa,sha224-dsa,sha256-rsa,sha256-dsa,sha384-rsa,sha384-dsa,sha512-rsa,sha512-dsa".

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups: The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and UseInternalSecurityAPI is set to True, the values refer to the supported groups for ECC. The following values are supported:

"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)

TLS13KeyShareGroups: The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448"
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1"
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096"
"ffdhe_6144"
"ffdhe_8192"

TLS13SignatureAlgorithms: The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

"rsa_pkcs1_sha256" (default)
"rsa_pkcs1_sha384" (default)
"rsa_pkcs1_sha512" (default)

The default value is rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.

TLS13SupportedGroups: The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

"ecdhe_x25519" (default)
"ecdhe_x448" (default)
"ecdhe_secp256r1" (default)
"ecdhe_secp384r1" (default)
"ecdhe_secp521r1" (default)
"ffdhe_2048" (default)
"ffdhe_3072" (default)
"ffdhe_4096" (default)
"ffdhe_6144" (default)
"ffdhe_8192" (default)

General Config Settings

AbsoluteTimeout: Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

LocalHost: The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

The LocalHost configuration contains the name of the local host as obtained by the Gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the task initiate connections (or accept in the case of server tasks) only through that interface.

If the task is connected, the LocalHost configuration shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

TcpNoDelay: Whether or not to delay when sending packets.

When true, the socket will send all data that is ready to send at once. When false, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this config is set to false.

UseInternalSecurityAPI: Whether or not to use the system security libraries or an internal implementation.

When set to False, the task will use the system security libraries by default to perform cryptographic functions where applicable. In this case, calls to unmanaged code will be made. In certain environments, this is not desirable. To use a completely managed security implementation, set this setting to True.

Setting this configuration setting to True tells the task to use the internal implementation instead of using the system security libraries.

On Windows, this setting is set to False by default. On Linux/macOS, this setting is set to True by default.

If using the .NET Standard Library, this setting will be True on all platforms. The .NET Standard library does not support using the system security libraries.

Note: This setting is static. The value set is applicable to all tasks used in the application.

When this value is set, the product's system dynamic link library (DLL) is no longer required as a reference, as all unmanaged code is stored in that file.