GoogleDrive Adapter

Properties   Config Settings  

The GoogleDrive Component allows easy uploading and downloading to and from the GoogleDrive service.

Remarks

The GoogleDrive Adapter provides a simple way to upload and download files from the GoogleDrive service.

To begin, the adapter must first be configured to allow access to the GoogleDrive using OAuth.

Open the OAuth Authorization dialog by clicking the ellipses (...) button of the OAuthAuthorization property at design time. This will open a dialog. Within the dialog specify the ClientId, ClientSecret, and CallbackURL values for the registered application.

After specifying the necessary values press the Authorize button to authorize the application. This will launch a browser and prompt the user to grant access. After access is granted the adapter will populate the following values:

• AuthorizationString
• RefreshToken
• ExpiresIn
• TimeStamp

All necessary values will be saved in the CacheLocation for use in subsequent requests by the adapter. The adapter will use the cached values and will automatically refresh the token if needed. In this way any user interaction is only required at design time, not at runtime.

GoogleDrive Receive Adapter

At runtime the adapter will connect to the GoogleDrive service every PollingInterval and list the directory specified by RemotePath. All files that match the FileMask will be downloaded and submitted to the BizTalk Message Engine as individual messages.

In order to guarantee that files are not downloaded multiple times, you may set the DeleteMode to remove files from the server that have been downloaded. Alternatively DownloadCacheFile may be used to keep a list of files which have already been downloaded.

GoogleDrive Send Adapter

The adapter will connect to the GoogleDrive service whenever it has a message to send. The adapter will attempt to upload to the specified RemotePath. If Overwrite is set to True, the adapter will delete or overwrite remote files as necessary to complete the operation.

Please refer to the section on adapter configuration for a description of how to configure receive locations and send ports for this adapter.

Receiver Property List

---

The following is the full list of the properties of the receiver Adapter with short descriptions. Click on the links for further details.

DeleteMode	Controls if and when the remote object is deleted after download.
EncryptionAlgorithm	The encryption algorithm.
EncryptionPassword	The encryption password.
ErrorThreshold	The maximum number of errors before the component shuts down.
FileMask	Indicates the type of files to download from the server.
Firewall	A set of properties related to firewall access.
HTTPProxy	A set of properties related to proxy access.
MaxBatchSize	The maximum size, in MB, of the current batch (0 indicates no limit).
MaxFileCount	The maximum number of files in the current batch (0 indicates no limit).
MaxFileSize	The maximum size, in MB, of a file in the current batch (0 indicates no limit).
MaxThreads	The maximum number of threads that the component may consume.
OAuthAuthorization	OAuth Authorization Information.
Other	Defines a set of configuration settings to be used by the component.
PollingInterval	The amount of time, in seconds, between download attempts.
ReceivedFileDate	The modified date of the remote file received by the component.
ReceivedFileName	The name of the remote file received by the component.
ReceivedFileSize	The size of the file in bytes.
RemotePath	The current path on the server.
RequeueEndpoints	Whether to requeue receive endpoints if the polling interval has not been reached.
RuntimeLicense	Specifies the component runtime license key.
SSLAcceptServerCert	Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLCert	The certificate to use for client authentication during the SSL handshake.
TempPath	A temporary local directory where data can be stored before the component processes it.
Timeout	A timeout for the component.
TransportLog	Tells the component where and how to report information about its operations.
URI	The Uniform Resource Identifier (URI) of the send port or receive location.

Sender Property List

---

The following is the full list of the properties of the sender Adapter with short descriptions. Click on the links for further details.

ConnectionLifetime	Instructs the component whether or not to leave the connection to the server open.
EncryptionAlgorithm	The encryption algorithm.
EncryptionPassword	The encryption password.
Firewall	A set of properties related to firewall access.
HTTPProxy	A set of properties related to proxy access.
MaxPersistentConnections	The maximum number of simultaneous persistent connections when sending.
MaxThreads	The maximum number of threads that the component may consume.
MaxTransmissionBatchSize	The maximum number of messages that can be sent in a single batch.
OAuthAuthorization	OAuth Authorization Information.
Other	Defines a set of configuration settings to be used by the component.
Overwrite	Whether or not the component should overwrite files during transfer.
RemoteFile	The name of the remote file.
RemotePath	The current path on the server.
RuntimeLicense	Specifies the component runtime license key.
SSLAcceptServerCert	Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLCert	The certificate to use for client authentication during the SSL handshake.
Timeout	A timeout for the component.
TransmitBatchMode	How the transmitter processes batches.
TransportLog	Tells the component where and how to report information about its operations.
URI	The Uniform Resource Identifier (URI) of the send port or receive location.

Config Settings

---

The following is a list of config settings for the Adapter with short descriptions. Click on the links for further details.

DateFormat	The date format of the file time.
DeleteOnSuspend	Specifies whether files may be deleted from server when message is suspended.
DeleteOnUploadError	Whether to delete the remote file when an error occurs after upload begins.
DocsExportFormat	The file format to export Google Docs files as when downloading.
DownloadCacheFile	When set, only new files will be downloaded from the server.
DownloadCacheFileDuration	The number of minutes that a file name will remain in the download cache.
DrawingsExportFormat	The file format to export Google Drawings files as when downloading.
EnableFileDetailsComparison	Whether the receive component should consider metadata differences when deciding whether to download a file again.
SheetsExportFormat	The file format to export Google Sheets files as when downloading.
SlidesExportFormat	The file format to export Google Slides files as when downloading.
ReuseSSLSession	Determines if the SSL session is reused.
SSLCipherStrength	The minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuites	The cipher suite to be used in an SSL negotiation.
SSLEnabledProtocols	Used to enable/disable the supported security protocols.
SSLIncludeCertChain	Whether the entire certificate chain is included in the SSLServerAuthentication event.
SSLSecurityFlags	Flags that control certificate verification.
TLS12SignatureAlgorithms	Defines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.
TLS12SupportedGroups	The supported groups for ECC.
TLS13KeyShareGroups	The groups for which to pregenerate key shares.
TLS13SignatureAlgorithms	The allowed certificate signature algorithms.
TLS13SupportedGroups	The supported groups for (EC)DHE key exchange.
AbsoluteTimeout	Determines whether timeouts are inactivity timeouts or absolute timeouts.
LocalHost	The name of the local host or user-assigned IP interface through which connections are initiated or accepted.
TcpNoDelay	Whether or not to delay when sending packets.
UseInternalSecurityAPI	Whether or not to use the system security libraries or an internal implementation.

GoogleDrive Receiver

How to Configure a GoogleDrive Receive Location with the BizTalk Server Administration Console

To configure the receive location by using the BizTalk Server Administration console, use the following procedure:

NOTE: Before completing the following procedure you must have already added a one-way receive port. For more information, see How to Create a Receive Port.

To configure receive location variables for a GoogleDrive receive location:

1. In the BizTalk Server Administration console, expand BizTalk Server Administration, expand BizTalk Group, expand Applications, and then expand the application you want to create a receive location in.
2. In the left pane, click the Receive Port node. Then in the right pane, right-click the receive port that is associated with an existing receive location or that you want to associate with a new receive location, and then click Properties.
3. In the left pane of the Receive Port Properties dialog box, select Receive Locations, and in the right pane double-click an existing receive location or click New to create a new receive location.
4. In the Receive Location Properties dialog box, in the Transport section next to Type, select nsoftware.GoogleDrive 2024 from the drop-down list, and then click Configure to configure the transport properties for the receive location.
5. In the nsoftware.GoogleDrive 2024 Transport Properties dialog box, you will find the following properties:

   DeleteMode	Controls if and when the remote object is deleted after download. Type: xs:int    Default Value: 0
   EncryptionAlgorithm	The encryption algorithm. Type: xs:int    Default Value: 0
   EncryptionPassword	The encryption password. Type: baf:Password    Default Value: ""
   ErrorThreshold	The maximum number of errors before the component shuts down. Type: xs:int    Default Value: 5
   FileMask	Indicates the type of files to download from the server. Type: xs:string    Default Value: "*.*"
   Firewall	A set of properties related to firewall access. Type: Firewall    Default Value: null
   HTTPProxy	A set of properties related to proxy access. Type: Proxy    Default Value: null
   MaxBatchSize	The maximum size, in MB, of the current batch (0 indicates no limit). Type: xs:int    Default Value: 0
   MaxFileCount	The maximum number of files in the current batch (0 indicates no limit). Type: xs:int    Default Value: 10
   MaxFileSize	The maximum size, in MB, of a file in the current batch (0 indicates no limit). Type: xs:int    Default Value: 0
   MaxThreads	The maximum number of threads that the component may consume. Type: xs:int    Default Value: 20
   OAuthAuthorization	OAuth Authorization Information. Type: OAuthAuthorizationParam    Default Value: null
   Other	Defines a set of configuration settings to be used by the component. Type: xs:string    Default Value: ""
   PollingInterval	The amount of time, in seconds, between download attempts. Type: xs:int    Default Value: 60
   ReceivedFileDate	The modified date of the remote file received by the component. Type: xs:string    Default Value: ""
   ReceivedFileName	The name of the remote file received by the component. Type: xs:string    Default Value: ""
   ReceivedFileSize	The size of the file in bytes. Type: xs:long    Default Value: 0
   RemotePath	The current path on the server. Type: xs:string    Default Value: ""
   RequeueEndpoints	Whether to requeue receive endpoints if the polling interval has not been reached. Type: bool    Default Value: false
   RuntimeLicense	Specifies the component runtime license key. Type: xs:string    Default Value: ""
   SSLAcceptServerCert	Instructs the component to unconditionally accept the server certificate that matches the supplied certificate. Type: Certificate    Default Value: null
   SSLCert	The certificate to use for client authentication during the SSL handshake. Type: Certificate    Default Value: null NOTE: The digital id must have a private key associated with it.
   TempPath	A temporary local directory where data can be stored before the component processes it. Type: xs:string    Default Value: ""
   Timeout	A timeout for the component. Type: xs:int    Default Value: 60
   TransportLog	Tells the component where and how to report information about its operations. Type: Log    Default Value: null
   URI	The Uniform Resource Identifier (URI) of the send port or receive location. Type: xs:string    Default Value: ""

6. Click OK.
7. Enter the appropriate values in the Receive Location Properties dialog box to complete the configuration of the receive location and click OK to save settings. For information about the Receive Locations Properties dialog box, see How to Create a Receive Location.

GoogleDrive Transmitter

Setting the GoogleDrive Adapter Configuration Properties for a Dynamic Send Port

A dynamic send port does not provide any transport configuration options in BizTalk Explorer because it is expected that these properties will be provided with the context properties associated with the message. These properties can be set in a custom pipeline or in an orchestration. To set message configuration properties in an orchestration you can do the following:

• Add a Construct Message shape to your orchestration.
• Configure the Construct Message shape to construct a new message. (for example Message_2)
• Add a Message Assignment shape to the Construct Message shape.
• Add code to the Message Assignment shape to initialize the message that you constructed and to set the appropriate configuration properties for the message.

Configuring the GoogleDrive Send Port with the BizTalk Server Administration Console

To configure the send port by using the BizTalk Server Administration console, use the following procedure:

To configure variables for a GoogleDrive send port:

1. In the BizTalk Server Administration console, create a new send port or double-click an existing send port to modify it. For more information, see How to Create a Send Port. Configure all of the send port options and specify nsoftware.GoogleDrive 2024 for the Type option in the Transport section of the General tab.
2. On the General tab, in the Transport section, click the Configure button next to Type.
3. In the nsoftware.GoogleDrive 2024 Transport Properties dialog box, use the following properties to:

   
   

   ConnectionLifetime	Instructs the component whether or not to leave the connection to the server open. Type: xs:int    Default Value: 0
   EncryptionAlgorithm	The encryption algorithm. Type: xs:int    Default Value: 0
   EncryptionPassword	The encryption password. Type: baf:Password    Default Value: ""
   Firewall	A set of properties related to firewall access. Type: Firewall    Default Value: null
   HTTPProxy	A set of properties related to proxy access. Type: Proxy    Default Value: null
   MaxPersistentConnections	The maximum number of simultaneous persistent connections when sending. Type: xs:int    Default Value: 1
   MaxThreads	The maximum number of threads that the component may consume. Type: xs:int    Default Value: 20
   MaxTransmissionBatchSize	The maximum number of messages that can be sent in a single batch. Type: xs:int    Default Value: 1
   OAuthAuthorization	OAuth Authorization Information. Type: OAuthAuthorizationParam    Default Value: null
   Other	Defines a set of configuration settings to be used by the component. Type: xs:string    Default Value: ""
   Overwrite	Whether or not the component should overwrite files during transfer. Type: bool    Default Value: true
   RemoteFile	The name of the remote file. Type: xs:string    Default Value: "%SourceFileName%" NOTE: This property must be specified.
   RemotePath	The current path on the server. Type: xs:string    Default Value: ""
   RuntimeLicense	Specifies the component runtime license key. Type: xs:string    Default Value: ""
   SSLAcceptServerCert	Instructs the component to unconditionally accept the server certificate that matches the supplied certificate. Type: Certificate    Default Value: null
   SSLCert	The certificate to use for client authentication during the SSL handshake. Type: Certificate    Default Value: null NOTE: The digital id must have a private key associated with it.
   Timeout	A timeout for the component. Type: xs:int    Default Value: 60
   TransmitBatchMode	How the transmitter processes batches. Type: xs:int    Default Value: 0
   TransportLog	Tells the component where and how to report information about its operations. Type: Log    Default Value: null
   URI	The Uniform Resource Identifier (URI) of the send port or receive location. Type: xs:string    Default Value: ""

4. Click OK and OK again to save settings.

ConnectionLifetime Property (GoogleDrive Adapter)

Instructs the component whether or not to leave the connection to the server open.

Data Type

Enumeration

Possible Values

Automatic (0)
Per Batch (1)
Persisted (2)

Default Value

0

Remarks

This property is used when uploading batches of messages to a server that use the same connection properties. In order to minimize connection-related protocol overhead, connections may be persisted with various lifetimes:

This property is not available in the Receiver.

DeleteMode Property (GoogleDrive Adapter)

Controls if and when the remote object is deleted after download.

Data Type

Enumeration

Possible Values

Never (0)
On Success (1)
On Failure (2)
Always (3)

Default Value

0

Remarks

This property informs the adapter as to whether or not it should delete a remote files from the server after a successful download. The possible values and their meanings are as follows:

Note: the default value is Never for data protection purposes. Unless modified this will result in the adapter continuously receiving the same data.

This property is not available in the Sender.

EncryptionAlgorithm Property (GoogleDrive Adapter)

The encryption algorithm.

Data Type

Enumeration

Possible Values

AES (0)
Blowfish (1)
CAST (2)
DES (3)
IDEA (4)
RC2 (5)
RC4 (6)
TEA (7)
Triple DES (8)
Twofish (9)
Rijndael (10)
Cha Cha (11)
XSalsa 20 (12)

Default Value

0

Remarks

This property specifies the encryption algorithm to be used. The maximum allowable key size is automatically used for the selected algorithm. Possible values are:

EncryptionPassword Property (GoogleDrive Adapter)

The encryption password.

Data Type

Password

Default Value

""

Remarks

When this property is specified the adapter will attempt to encrypt or decrypt the file when uploading or downloading.

The adapter uses the value specified here to generate the necessary encryption Key and IV values using the PKCS5 password digest algorithm. This provides a simpler alternative to creating and managed Key and IV values directly.

ErrorThreshold Property (GoogleDrive Adapter)

The maximum number of errors before the component shuts down.

Data Type

Integer

Default Value

5

Remarks

This property limits the number of errors that the adapter can incur before it shuts down and stops processing messages.

If set to 0 the adapter will never shutdown.

Note that if the operation completes successfully the current error count will be reset.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Sender.

FileMask Property (GoogleDrive Adapter)

Indicates the type of files to download from the server.

Data Type

String

Default Value

"*.*"

Remarks

This property will limit what kinds of files the adapter will download from the server. Only files matching the pattern specified in FileMask will be retrieved.

The following special characters are supported for pattern matching:

If these characters need to be used as a literal in a pattern, then they must be escaped by surrounding them with brackets []. Note: "]" and "-" do not need to be escaped. See below for the escape sequences:

For example, to match the value [Something].txt, specify the pattern [[]Something].txt.

This property is not available in the Sender.

Firewall Property (GoogleDrive Adapter)

A set of properties related to firewall access.

Data Type

Firewall

Remarks

This is a Firewall type property which contains fields describing the firewall through which the adapter will attempt to connect.

HTTPProxy Property (GoogleDrive Adapter)

A set of properties related to proxy access.

Data Type

Proxy

Remarks

This is a Proxy type property which contains fields describing the proxy through which the adapter will attempt to connect.

MaxBatchSize Property (GoogleDrive Adapter)

The maximum size, in MB, of the current batch (0 indicates no limit).

Data Type

Integer

Default Value

0

Remarks

This property limits the maximum amount of data the adapter can store before finalizing and processing the current batch to the number of bytes indicated.

Note: the default value, "0" indicates that there is no limit on the size of the batch. This value is not recommended for production environments as it may result in extremely large batches being held in memory before the adapter moves the data to the next stage of processing.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Sender.

MaxFileCount Property (GoogleDrive Adapter)

The maximum number of files in the current batch (0 indicates no limit).

Data Type

Integer

Default Value

10

Remarks

This property places a limit on the number of files that can be transmitted in a single batch.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Sender.

MaxFileSize Property (GoogleDrive Adapter)

The maximum size, in MB, of a file in the current batch (0 indicates no limit).

Data Type

Integer

Default Value

0

Remarks

This property limits the maximum size of any file in the current transmission batch to the number of bytes indicated.

Note: the default value, "0" indicates that there is no limit on the size of the batch. This value is not recommended for production environments as it may result in extremely large batches being held in memory before the adapter moves the data to the next stage of processing.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Sender.

MaxPersistentConnections Property (GoogleDrive Adapter)

The maximum number of simultaneous persistent connections when sending.

Data Type

Integer

Default Value

1

Remarks

This setting specifies the maximum number of simultaneous persistent connections when sending.

The default value is 1, which limits the adapter to using one persistent connection for the adapter at any one time. This means when ConnectionLifetime is set to Persisted the send adapter will first check to see if an existing connection is present before transmitting data. In the case where a connection exists but another instance of the send port is using the connection the adapter will wait for the connection to become free. A value of 1 effectively serializes all communication for the send port through one persistent connection.

By setting a value greater than 1 a pool of persistent connections can be created. This allows multiple simultaneous persistent connections to be used. When the send adapter is active it will check to see if there are any existing connections. In the case where a connection exists but is being used by another instance of the send port it will attempt to create a new persistent connection. If creating a new persistent connection would exceed the limit specified in this setting the adapter will instead wait for a connection to become free. Setting this to a value greater than 1 allows multiple simultaneous connections to be made while still taking advantage of persistent connections to reduce the overhead of re-connecting.

Note: This only applies to the send adapter.

The default value is 1.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Receiver.

MaxThreads Property (GoogleDrive Adapter)

The maximum number of threads that the component may consume.

Data Type

Integer

Default Value

20

Remarks

This property limits the number of concurrent threads that the adapter may consume while completing its work.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

MaxTransmissionBatchSize Property (GoogleDrive Adapter)

The maximum number of messages that can be sent in a single batch.

Data Type

Integer

Default Value

1

Remarks

This property controls the maximum size of an outbound message batch.

Note: be careful when modifying this property as it directly effects the efficiency of the transmit adapter. Setting MaxTransmissionBatchSize to a low value in an environment that requires transmission of large quantities of data will result in the adapter accumulating several small batches. If TransmitBatchMode is set to Parallel, this will result in the adapter transmitting many small batches at once and can put a heavy load on the processor.

Conversely, if TransmitBatchMode is set to Serial, setting MaxTransmissionBatchSize to a large value may result in long transmission delays as the adapter will wait on existing work to complete before accepting new messages from the BizTalk Message Engine. This is especially true when the adapter is transmitting large data.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Receiver.

OAuthAuthorization Property (GoogleDrive Adapter)

OAuth Authorization Information.

Data Type

OAuthAuthorizationParam

Remarks

This property holds details about the OAuth authorization. This includes the following fields:

• AuthorizationScopes
• AuthorizationString
• CacheLocation
• CallbackURL
• ClientId
• ClientSecret
• ExpiresIn
• RefreshToken
• ServerAuthURL
• ServerTokenURL
• ServiceProvider
• TimeStamp

Other Property (GoogleDrive Adapter)

Defines a set of configuration settings to be used by the component.

Data Type

String

Default Value

""

Remarks

The adapter accepts one or more configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the adapter, access to these internal properties is provided through the Other property.

The Other property may be set to one or more configuration settings (name/value pairs). Set one setting per line. For example: configname1=value1 configname2=value2

Overwrite Property (GoogleDrive Adapter)

Whether or not the component should overwrite files during transfer.

Data Type

Boolean

Default Value

true

Remarks

This property is a value indicating whether or not the adapter should overwrite files on the server if they already exist. If Overwrite is false, an error will be thrown whenever RemoteFile exists before an upload operation.

This property is not available in the Receiver.

PollingInterval Property (GoogleDrive Adapter)

The amount of time, in seconds, between download attempts.

Data Type

Integer

Default Value

60

Remarks

The adapter will wait for the number of seconds indicated before attempting another download.

This property is not available in the Sender.

ReceivedFileDate Property (GoogleDrive Adapter)

The modified date of the remote file received by the component.

Data Type

String

Default Value

""

Remarks

This value contains the modified date of the remote file received by the adapter. It can be read from the context of a message received by a adapter receive location.

By default the datetime format used is "yyyy-MM-dd'T'HH:mm:ss". To modify this format set DateFormat.

Note: Modified times are not applicable to directories for the following providers:

• cspAmazonS3 (0)
• cspDropbox (2)
• cspWasabi (7)
• cspDigitalOcean (8)
• cspGoogleStorage (9)
• cspBackblazeB2 (12)
• cspIBMStorage (13)
• cspLinode (14)

Additionally, the following providers do not return modified times at all:

• cspAzureFile (11)

This property is not available in the Sender.

ReceivedFileName Property (GoogleDrive Adapter)

The name of the remote file received by the component.

Data Type

String

Default Value

""

Remarks

This is the file name returned by the server.

This value is also placed in the File.ReceivedFileName and the [Adapter].ReceivedFileName context properties. This is to ensure compatibility with other adapters that poll those context properties when filling out macros such as %SourceFileName%.

This property is not available in the Sender.

ReceivedFileSize Property (GoogleDrive Adapter)

The size of the file in bytes.

Data Type

Integer

Default Value

0

Remarks

This property holds the size of the received file in bytes. It can be read from the context of a message being received by a adapter receive location.

This property is not available in the Sender.

RemoteFile Property (GoogleDrive Adapter)

The name of the remote file.

Data Type

String

Default Value

"%SourceFileName%"

Remarks

This property specifies the remote filename. This is either an absolute path, or a relative path based on RemotePath. For instance:

Filename only: file.txt

Relative Path: subfolder/file.txt

Absolute Path: /MyFolder/subfolder/file.txt

This property is not available in the Receiver.

RemotePath Property (GoogleDrive Adapter)

The current path on the server.

Data Type

String

Default Value

""

Remarks

This property specifies the path on the remote server. This may be set to an absolute or relative path.

If the path begins with a "/" it is considered an absolute path.

If the first two characters of the path are ".." this indicates a change to the parent directory.

RequeueEndpoints Property (GoogleDrive Adapter)

Whether to requeue receive endpoints if the polling interval has not been reached.

Data Type

Boolean

Default Value

false

Remarks

This setting controls whether receive endpoints are requeued for later processing if the polling interval has not yet been reached. When this setting is set to No (default) each thread will block until the polling interval for the corresponding receive location is reached. If there exist more active receive locations than MaxThreads it is possible for some threads to block the execution of others since they may be waiting for a polling interval.

When this setting is set to Yes if the polling interval has not been reached the thread will not block until the polling interval is reached, and instead the endpoint will be requeued to be processed later. This lets subsequent endpoints in the queue to be processed.

If MaxThreads is set to a low value and there are a larger number of receive locations setting this to Yes will help assure that polling intervals are respected and receive locations poll in a timely manner.

The default value is No.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Sender.

RuntimeLicense Property (GoogleDrive Adapter)

Specifies the component runtime license key.

Data Type

String

Default Value

""

Remarks

You can use the RuntimeLicense property to set the runtime key for the adapter license.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

SSLAcceptServerCert Property (GoogleDrive Adapter)

Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.

Data Type

Certificate

Remarks

If it finds any issues with the certificate presented by the server, the adapter will normally terminate the connection with an error. You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

This property is used to set a Public Key Certificate.

Ordinarily, the system will attempt to locate the public key in trusted certificate stores in the system registry. If a match is found, the certificate is trusted, and the process proceeds without error. If the certificate is not trusted, the adapter will report an error.

You may explicitly set a public key, either to accept a key that is not installed on the system, or to ensure that a specific key is presented. Public key certificates may be loaded from the machine registry or from file. If you click on the ellipses, a certificate selection dialog will open. To select a public key from the system registry, select the System Store tab or the User Store tab, and highlight the appropriate registry store. The list of available certificates will be shown below.

Alternatively, you may specify a public key on file. Select the PEM or Certificate File tabs to load a public key from file. You can use the browse button to examine the file system for the certificate that you wish to use. Public keys typically are stored in .CER, .DER, or .PEM files, but other formats may be used. You can click on the Open button to examine the contents of the certificate. Or, if you have a certificate stored in memory, you can write the contents of the certificate into the text box provided. Note that if you are loading a certificate from memory, the certificate must be Base-64 encoded, or the string representation of the certificate may become corrupted and uninterpretable.

Regardless of how you selected the certificate, once you hit the OK button, the adapter will attempt to verify that certificate selection. If successful, the subject of the certificate will be displayed in the property field. If the adapter was not able to verify the selection, a dialog box will appear instead detailing the verification error.

Note: You may also set the Accept Any field to Yes without opening the certificate selection dialog to force the adapter to unilaterally authenticate any server during the security handshake. It is strongly recommended that you use this only for testing purposes. Set the LogMode to Info to cause the adapter to report the server's credentials to Location.

SSLCert Property (GoogleDrive Adapter)

The certificate to use for client authentication during the SSL handshake.

Data Type

Certificate

Remarks

This property is used to assign a specific certificate for SSL client authentication.

This field is used to set a Private Key Certificate.

Private key certificates may be loaded from the registry, from files in PKCS#12 format, or from a PEM file format. If you click on the ellipses, a certificate selection dialog will open. To select a private key from the system registry, select the System Store tab or the User Store tab, and highlight the appropriate registry store. The list of certificates which have private keys will be shown below.

To select a private key certificate from a file in PKCS#12 format, select the PFX Store tab. The browse button can be used to examine the file system for PKCS#12 (.pfx or .p12) certificates. If you wish to examine the certificate, provide the password in the field provided and click on the Open button to examine the file store for certificates present. To load a certificate from PEM files, select the PEM tab. Like the PFX file selection, you can specify the password and click the Open button to examine the certificates in the PEM store, or you may paste any PEM data stored in memory.

Regardless of how you selected the certificate, once you hit the OK button, the adapter will attempt to verify that certificate selection. If successful, the subject of the certificate will be displayed in the property field. If the adapter was not able to verify the selection, a dialog box will appear instead detailing the verification error.

TempPath Property (GoogleDrive Adapter)

A temporary local directory where data can be stored before the component processes it.

Data Type

String

Default Value

""

Remarks

This property indicates a temporary directory where the adapter can store any data before the adapter processes it. If TempPath is empty, the adapter will receive all data to memory. If set, the adapter will generate and write all inbound data to a temporary file in the specified directory.

Once the file is submitted, the adapter will handle closing the file stream and deleting the temporary file. However, if the adapter is shut down during a transfer some temporary files may be left in the directory. To ensure optimal performance, server administrators should check the directory regularly and remove old or extraneous files.

This property accepts the "%TEMP%" macro, which will be replaced with the default system temporary directory at runtime. Note: by default, this property is empty and the adapter will use memory streams to store all inbound data before submitting it. It is recommended that you use a temporary directory when downloading large batches or batches containing large files to alleviate potential increased memory requirements.

This property is not available in the Sender.

Timeout Property (GoogleDrive Adapter)

A timeout for the component.

Data Type

Integer

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion, or an error condition is encountered.

If Timeout is set to a positive value, the adapter will wait for the operation to complete before returning control.

If Timeout expires, and the operation is not yet complete, the adapter fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when data is successfully sent or received.

Optionally, the behavior of the adapter may be changed to absolute timeouts, i.e. the adapter will wait for a maximum of Timeout seconds since the beginning of the operation, without extending the timeout period during communications.

This behavior is controlled by the AbsoluteTimeout configuration setting.

The default value for the Timeout property is 60 (seconds).

TransmitBatchMode Property (GoogleDrive Adapter)

How the transmitter processes batches.

Data Type

Enumeration

Possible Values

Parallel (0)
Serial (1)

Default Value

0

Remarks

This property controls how the transmitter processes message batches:

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Receiver.

TransportLog Property (GoogleDrive Adapter)

Tells the component where and how to report information about its operations.

Data Type

Log

Remarks

This is a Log type property which contains fields describing how and where the adapter will record information about its execution.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

URI Property (GoogleDrive Adapter)

The Uniform Resource Identifier (URI) of the send port or receive location.

Data Type

String

Default Value

""

Remarks

This property specifies a URI for the send port or receive location. Setting this property is optional.

By default the adapter will automatically generate a URI. You may choose to specify your own value here to be used in place of the generated URI.

If this value is specified it must begin with the correct prefix, as seen in the default value.

Certificate Type

The digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Certificate();

public Certificate(string certificateFile);

public Certificate(byte[] certificateData);

public Certificate(CertStoreTypes certStoreType, string store, string storePassword, string subject);

public Certificate(CertStoreTypes certStoreType, string store, string storePassword, byte[] encoded);

public Certificate(CertStoreTypes certStoreType, byte[] storeBlob, string storePassword, string subject);

public Certificate(CertStoreTypes certStoreType, byte[] storeBlob, string storePassword, byte[] encoded);

Firewall Type

The firewall the component will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall such as the firewall Host and the FirewallType.

Fields

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Firewall();

Log Type

A log where the component will record information about its operations.

Remarks

This describes how and where the adapter will record information describing its execution.

Fields

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Log();

public Log(LogTypes logType, string location, LogModes logMode);

OAuthAuthorizationParam Type

This type holds details of the OAuth authorization.

Remarks

This type holds details of the OAuth authorization.

Fields

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public OAuthAuthorizationParam();

Proxy Type

The proxy the component will connect to.

Remarks

When connecting through a proxy, this type is used to specify different properties of the proxy such as the Server and the AuthScheme.

Fields

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Proxy();

public Proxy(string server, int port);

public Proxy(string server, int port, string user, string password);

Config Settings (GoogleDrive Adapter)

The adapter accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the adapter, access to these internal properties is provided through the Other property.

GoogleDrive Config Settings

SSL Config Settings

General Config Settings

Supported Macros

The adapter also supports the following Macros. These values are not case sensitive and would be supplied to a property in the form %MacroName%.