Telnet Adapter

Properties   Config Settings  

The Telnet Component enables remote execution of commands over Telnet.

Remarks

The Telnet Adapter enables remote execution of commands over Telnet.

Telnet Send Adapter

The Telnet Send Adapter provides a light-weight remote command execution client for BizTalk Server. To begin Server must be specified. By default Authenticate is True and User and Password must also be set.

Specify the command to be executed in Command. Upon execution the adapter will connect to the Telnet server and execute the Command. The response will be provide through the CommandResponse property.

Additional scripting properties BeforeExecute and AfterExecute provide additional flexibility allowing any number of commands and operations to be performed.

Please refer to the section on adapter configuration for a description of how to configure receive locations and send ports for this adapter.

Sender Property List


The following is the full list of the properties of the sender Adapter with short descriptions. Click on the links for further details.

AfterExecuteA set of commands to be executed after Command execution.
AuthenticateWhether to authenticate when connecting.
BeforeExecuteA set of Telnet commands to be executed before Command execution.
CommandThe command to be sent to the server.
CommandResponseThe response to the command.
ConnectionLifetimeInstructs the component whether or not to leave the connection to the server open.
FirewallA set of properties related to firewall access.
LoginPromptThe format of the prompt for the user's login.
MaxPersistentConnectionsThe maximum number of simultaneous persistent connections when sending.
MaxThreadsThe maximum number of threads that the component may consume.
MaxTransmissionBatchSizeThe maximum number of messages that can be sent in a single batch.
OtherDefines a set of configuration settings to be used by the component.
PasswordThe password to use for authentication.
PasswordPromptThe format of the prompt for the user's password.
PortThe remote port for the Telnet service (default is 23).
RuntimeLicenseSpecifies the component runtime license key.
ServerThe address of the Server.
ShellPromptThe shell prompt of the telnet session.
ShellPromptExpressionA regular expression to match the shell prompt returned by the server.
SSLAcceptServerCertInstructs the component to unconditionally accept the server certificate that matches the supplied certificate.
SSLCertThe certificate to use for client authentication during the SSL handshake.
SSLStartModeDetermines how the component starts the SSL negotiation.
SSOAffiliateSpecifies the name of the SSO Affiliate Application.
TimeoutA timeout for the component.
TransmitBatchModeHow the transmitter processes batches.
TransportLogTells the component where and how to report information about its operations.
URIThe Uniform Resource Identifier (URI) of the send port or receive location.
UserThe username to use for authentication.

Config Settings


The following is a list of config settings for the Adapter with short descriptions. Click on the links for further details.

EOLThe EOL used to parse the response.
ReturnPromptWhether to include the prompt in response data.
ReturnScriptResponseWhether to include script output in response data.
TerminalTypeThe terminal type.
ReuseSSLSessionDetermines if the SSL session is reused.
SSLCipherStrengthThe minimum cipher strength used for bulk encryption.
SSLEnabledCipherSuitesThe cipher suite to be used in an SSL negotiation.
SSLEnabledProtocolsUsed to enable/disable the supported security protocols.
SSLIncludeCertChainWhether the entire certificate chain is included in the SSLServerAuthentication event.
SSLSecurityFlagsFlags that control certificate verification.
TLS12SignatureAlgorithmsDefines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.
TLS12SupportedGroupsThe supported groups for ECC.
TLS13KeyShareGroupsThe groups for which to pregenerate key shares.
TLS13SignatureAlgorithmsThe allowed certificate signature algorithms.
TLS13SupportedGroupsThe supported groups for (EC)DHE key exchange.
AbsoluteTimeoutDetermines whether timeouts are inactivity timeouts or absolute timeouts.
LocalHostThe name of the local host or user-assigned IP interface through which connections are initiated or accepted.
TcpNoDelayWhether or not to delay when sending packets.
UseInternalSecurityAPIWhether or not to use the system security libraries or an internal implementation.

Telnet Transmitter

Setting the Telnet Adapter Configuration Properties for a Dynamic Send Port

A dynamic send port does not provide any transport configuration options in BizTalk Explorer because it is expected that these properties will be provided with the context properties associated with the message. These properties can be set in a custom pipeline or in an orchestration. To set message configuration properties in an orchestration you can do the following:

  • Add a Construct Message shape to your orchestration.
  • Configure the Construct Message shape to construct a new message. (for example Message_2)
  • Add a Message Assignment shape to the Construct Message shape.
  • Add code to the Message Assignment shape to initialize the message that you constructed and to set the appropriate configuration properties for the message.

Configuring the Telnet Send Port with the BizTalk Server Administration Console

To configure the send port by using the BizTalk Server Administration console, use the following procedure:

To configure variables for a Telnet send port:

  1. In the BizTalk Server Administration console, create a new send port or double-click an existing send port to modify it. For more information, see How to Create a Send Port. Configure all of the send port options and specify nsoftware.Telnet 2024 for the Type option in the Transport section of the General tab.
  2. On the General tab, in the Transport section, click the Configure button next to Type.
  3. In the nsoftware.Telnet 2024 Transport Properties dialog box, use the following properties to:


    AfterExecute A set of commands to be executed after Command execution.
    Type: xs:string    Default Value: ""
    Authenticate Whether to authenticate when connecting.
    Type: bool    Default Value: true
    BeforeExecute A set of Telnet commands to be executed before Command execution.
    Type: xs:string    Default Value: ""
    Command The command to be sent to the server.
    Type: xs:string    Default Value: ""
    NOTE: This property must be specified.
    CommandResponse The response to the command.
    Type: xs:string    Default Value: ""
    ConnectionLifetime Instructs the component whether or not to leave the connection to the server open.
    Type: xs:int    Default Value: 0
    Firewall A set of properties related to firewall access.
    Type: Firewall    Default Value: null
    LoginPrompt The format of the prompt for the user's login.
    Type: xs:string    Default Value: "Login:"
    MaxPersistentConnections The maximum number of simultaneous persistent connections when sending.
    Type: xs:int    Default Value: 1
    MaxThreads The maximum number of threads that the component may consume.
    Type: xs:int    Default Value: 20
    MaxTransmissionBatchSize The maximum number of messages that can be sent in a single batch.
    Type: xs:int    Default Value: 1
    Other Defines a set of configuration settings to be used by the component.
    Type: xs:string    Default Value: ""
    Password The password to use for authentication.
    Type: baf:Password    Default Value: ""
    PasswordPrompt The format of the prompt for the user's password.
    Type: xs:string    Default Value: "Password:"
    Port The remote port for the Telnet service (default is 23).
    Type: xs:int    Default Value: 23
    RuntimeLicense Specifies the component runtime license key.
    Type: xs:string    Default Value: ""
    Server The address of the Server.
    Type: xs:string    Default Value: ""
    NOTE: This property must be specified.
    ShellPrompt The shell prompt of the telnet session.
    Type: xs:string    Default Value: ">"
    ShellPromptExpression A regular expression to match the shell prompt returned by the server.
    Type: xs:string    Default Value: ""
    SSLAcceptServerCert Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.
    Type: Certificate    Default Value: null
    SSLCert The certificate to use for client authentication during the SSL handshake.
    Type: Certificate    Default Value: null
    NOTE: The digital id must have a private key associated with it.
    SSLStartMode Determines how the component starts the SSL negotiation.
    Type: xs:int    Default Value: 3
    SSOAffiliate Specifies the name of the SSO Affiliate Application.
    Type: baf:SSOList    Default Value: ""
    Timeout A timeout for the component.
    Type: xs:int    Default Value: 60
    TransmitBatchMode How the transmitter processes batches.
    Type: xs:int    Default Value: 0
    TransportLog Tells the component where and how to report information about its operations.
    Type: Log    Default Value: null
    URI The Uniform Resource Identifier (URI) of the send port or receive location.
    Type: xs:string    Default Value: ""
    User The username to use for authentication.
    Type: xs:string    Default Value: ""

  4. Click OK and OK again to save settings.

AfterExecute Property (Telnet Adapter)

A set of commands to be executed after Command execution.

Data Type

String

Default Value

""

Remarks

AfterExecute is a script that is executed immediately following the execution of Command.

Each line in the script is treated as a single command.

Valid additional scripting commands are listed below:

exec Command [Prompt]Sends Command to the server. If Prompt is not set, the adapter will wait for ShellPrompt or ShellPromptExpression.
send DataSends Data to server and does not wait for a response.
wait ExpectedResponseWaits for a server response that includes ExpectedResponse. If no matching response is received within Timeout seconds an error occurs.
sleep TimeSleeps Time seconds.
Commands that include spaces should be surrounded with quotes. For instance: exec "echo hello" Quotes within a command do not need to be escaped. For instance: exec "echo hello "world"" Will send: echo hello "world" Commands that include spaces should be surrounded with quotes. For instance: exec "echo hello" Quotes within a command do not need to be escaped. For instance: exec "echo hello "world"" Will send: echo hello "world"

The "\" character is the escape character. It is used with the special case of Cr and Lf characters. For instance: exec "pwd\r\n" Will send "pwd" followed by a CrLf sequence.

The "\" escape character is also used when specifying non-ASCII characters by passing Hex encoded values. For instance: exec "\7F" Will send the DEL control character.

Authenticate Property (Telnet Adapter)

Whether to authenticate when connecting.

Data Type

Boolean

Default Value

true

Remarks

This property determines whether to authenticate when connecting. If set to True, the adapter will authenticate using the User and Password values to authenticate. The LoginPrompt and PasswordPrompt should be set to the appropriate values for the server.

The basic sequence of events when set to True is as follows:

The basic sequence of events when set to False is as follows:

  • Connect
  • Wait for ShellPrompt
  • Proceed with command execution

The default value is True.

BeforeExecute Property (Telnet Adapter)

A set of Telnet commands to be executed before Command execution.

Data Type

String

Default Value

""

Remarks

BeforeExecute is a script that is executed immediately before executing Command.

Each line in the script is treated as a single command.

Valid additional scripting commands are listed below:

exec Command [Prompt]Sends Command to the server. If Prompt is not set, the adapter will wait for ShellPrompt or ShellPromptExpression.
send DataSends Data to server and does not wait for a response.
wait ExpectedResponseWaits for a server response that includes ExpectedResponse. If no matching response is received within Timeout seconds an error occurs.
sleep TimeSleeps Time seconds.
Commands that include spaces should be surrounded with quotes. For instance: exec "echo hello" Quotes within a command do not need to be escaped. For instance: exec "echo hello "world"" Will send: echo hello "world" Commands that include spaces should be surrounded with quotes. For instance: exec "echo hello" Quotes within a command do not need to be escaped. For instance: exec "echo hello "world"" Will send: echo hello "world"

The "\" character is the escape character. It is used with the special case of Cr and Lf characters. For instance: exec "pwd\r\n" Will send "pwd" followed by a CrLf sequence.

The "\" escape character is also used when specifying non-ASCII characters by passing Hex encoded values. For instance: exec "\7F" Will send the DEL control character.

Command Property (Telnet Adapter)

The command to be sent to the server.

Data Type

String

Default Value

""

Remarks

This property specifies the command to be sent to the server. For instance: "ls" or "dir". The response to the command will be held in CommandResponse.

CommandResponse Property (Telnet Adapter)

The response to the command.

Data Type

String

Default Value

""

Remarks

This property holds the response to the Command once execution has completed.

ConnectionLifetime Property (Telnet Adapter)

Instructs the component whether or not to leave the connection to the server open.

Data Type

Enumeration

Possible Values

Automatic (0)
Per Batch (1)
Persisted (2)


Default Value

0

Remarks

This property is used when uploading batches of messages to a server that use the same connection properties. In order to minimize connection-related protocol overhead, connections may be persisted with various lifetimes:

Automatic (0 - default)The connection to the server will be established as needed per each message. When the message transmission is complete, the adapter will disconnect from the server.
Per Batch (1)During each batch, the connection to the server will be established as needed per each message. If a connection already exists to the server, that will be used as opposed to creating a new one. At the end of the batch, all such connections will be disconnected.
Persisted (2)Connections will be established as needed and stored. If a connection already exists for a server, that will be used as opposed to creating a new one. The connections will not be disconnected until the adapter is terminated by the BizTalk Message Engine.

This property is not available in the Receiver.

Firewall Property (Telnet Adapter)

A set of properties related to firewall access.

Data Type

Firewall

Remarks

This is a Firewall type property which contains fields describing the firewall through which the adapter will attempt to connect.

LoginPrompt Property (Telnet Adapter)

The format of the prompt for the user's login.

Data Type

String

Default Value

"Login:"

Remarks

This property specifies the prompt for the user's login. The adapter will wait for this prompt before sending the User value. This is not case sensitive. This property is only applicable when Authenticate is set to True.

The default value is "Login:".

MaxPersistentConnections Property (Telnet Adapter)

The maximum number of simultaneous persistent connections when sending.

Data Type

Integer

Default Value

1

Remarks

This setting specifies the maximum number of simultaneous persistent connections when sending.

The default value is 1, which limits the adapter to using one persistent connection for the adapter at any one time. This means when ConnectionLifetime is set to Persisted the send adapter will first check to see if an existing connection is present before transmitting data. In the case where a connection exists but another instance of the send port is using the connection the adapter will wait for the connection to become free. A value of 1 effectively serializes all communication for the send port through one persistent connection.

By setting a value greater than 1 a pool of persistent connections can be created. This allows multiple simultaneous persistent connections to be used. When the send adapter is active it will check to see if there are any existing connections. In the case where a connection exists but is being used by another instance of the send port it will attempt to create a new persistent connection. If creating a new persistent connection would exceed the limit specified in this setting the adapter will instead wait for a connection to become free. Setting this to a value greater than 1 allows multiple simultaneous connections to be made while still taking advantage of persistent connections to reduce the overhead of re-connecting.

Note: This only applies to the send adapter.

The default value is 1.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Receiver.

MaxThreads Property (Telnet Adapter)

The maximum number of threads that the component may consume.

Data Type

Integer

Default Value

20

Remarks

This property limits the number of concurrent threads that the adapter may consume while completing its work.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

MaxTransmissionBatchSize Property (Telnet Adapter)

The maximum number of messages that can be sent in a single batch.

Data Type

Integer

Default Value

1

Remarks

This property controls the maximum size of an outbound message batch.

Note: be careful when modifying this property as it directly effects the efficiency of the transmit adapter. Setting MaxTransmissionBatchSize to a low value in an environment that requires transmission of large quantities of data will result in the adapter accumulating several small batches. If TransmitBatchMode is set to Parallel, this will result in the adapter transmitting many small batches at once and can put a heavy load on the processor.

Conversely, if TransmitBatchMode is set to Serial, setting MaxTransmissionBatchSize to a large value may result in long transmission delays as the adapter will wait on existing work to complete before accepting new messages from the BizTalk Message Engine. This is especially true when the adapter is transmitting large data.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Receiver.

Other Property (Telnet Adapter)

Defines a set of configuration settings to be used by the component.

Data Type

String

Default Value

""

Remarks

The adapter accepts one or more configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the adapter, access to these internal properties is provided through the Other property.

The Other property may be set to one or more configuration settings (name/value pairs). Set one setting per line. For example: configname1=value1 configname2=value2

Password Property (Telnet Adapter)

The password to use for authentication.

Data Type

Password

Default Value

""

Remarks

This property specifies the password used during authentication.

PasswordPrompt Property (Telnet Adapter)

The format of the prompt for the user's password.

Data Type

Password

Default Value

"Password:"

Remarks

This property specifies the prompt for the user's password. The adapter will wait for this prompt before sending the Password value. This is not case sensitive. This property is only applicable when Authenticate is set to True.

The default value is "Login:".

Port Property (Telnet Adapter)

The remote port for the Telnet service (default is 23).

Data Type

Integer

Default Value

23

Remarks

This property specifies the remote port of the Telnet service to which the connection will be made.

A valid port number (a value between 1 and 65535) is required for the connection to take place.

The default value is 23.

RequeueEndpoints Property (Telnet Adapter)

Whether to requeue receive endpoints if the polling interval has not been reached.

Data Type

Boolean

Default Value

false

Remarks

This setting controls whether receive endpoints are requeued for later processing if the polling interval has not yet been reached. When this setting is set to No (default) each thread will block until the polling interval for the corresponding receive location is reached. If there exist more active receive locations than MaxThreads it is possible for some threads to block the execution of others since they may be waiting for a polling interval.

When this setting is set to Yes if the polling interval has not been reached the thread will not block until the polling interval is reached, and instead the endpoint will be requeued to be processed later. This lets subsequent endpoints in the queue to be processed.

If MaxThreads is set to a low value and there are a larger number of receive locations setting this to Yes will help assure that polling intervals are respected and receive locations poll in a timely manner.

The default value is No.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Sender.

RuntimeLicense Property (Telnet Adapter)

Specifies the component runtime license key.

Data Type

String

Default Value

""

Remarks

You can use the RuntimeLicense property to set the runtime key for the adapter license.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

Server Property (Telnet Adapter)

The address of the Server.

Data Type

String

Default Value

""

Remarks

The Server property specifies the IP address (IP number in dotted internet format) or Domain Name of the Telnet server.

ShellPrompt Property (Telnet Adapter)

The shell prompt of the telnet session.

Data Type

String

Default Value

">"

Remarks

This property specifies the shell prompt to wait for when executing a command. After a command is sent to the server the adapter will search the response for the prompt defined in this property to signal that the command execution is complete. If the ShellPrompt is not found within Timeout seconds an error occurs.

This value is case sensitive.

The default value is ">".

ShellPromptExpression Property (Telnet Adapter)

A regular expression to match the shell prompt returned by the server.

Data Type

String

Default Value

""

Remarks

This property specifies a regular expression defining a pattern of shell prompt to wait for when executing a command. After a command is sent to the server the adapter will search the response for a prompt matching the expression defined in this property to signal that the command execution is complete.

This may be used in place of ShellPrompt and is helpful in situations where the exact prompt is not known but a general format is defined. If a matching prompt is not found within Timeout seconds an error occurs.

Note: The value specified in ShellPromptExpression must be a properly formatted .NET regular expression.

SSLAcceptServerCert Property (Telnet Adapter)

Instructs the component to unconditionally accept the server certificate that matches the supplied certificate.

Data Type

Certificate

Remarks

If it finds any issues with the certificate presented by the server, the adapter will normally terminate the connection with an error. You may override this behavior by supplying a value for SSLAcceptServerCert. If the certificate supplied in SSLAcceptServerCert is the same as the certificate presented by the server, then the server certificate is accepted unconditionally, and the connection will continue normally.

This property is used to set a Public Key Certificate.

Ordinarily, the system will attempt to locate the public key in trusted certificate stores in the system registry. If a match is found, the certificate is trusted, and the process proceeds without error. If the certificate is not trusted, the adapter will report an error.

You may explicitly set a public key, either to accept a key that is not installed on the system, or to ensure that a specific key is presented. Public key certificates may be loaded from the machine registry or from file. If you click on the ellipses, a certificate selection dialog will open. To select a public key from the system registry, select the System Store tab or the User Store tab, and highlight the appropriate registry store. The list of available certificates will be shown below.

Alternatively, you may specify a public key on file. Select the PEM or Certificate File tabs to load a public key from file. You can use the browse button to examine the file system for the certificate that you wish to use. Public keys typically are stored in .CER, .DER, or .PEM files, but other formats may be used. You can click on the Open button to examine the contents of the certificate. Or, if you have a certificate stored in memory, you can write the contents of the certificate into the text box provided. Note that if you are loading a certificate from memory, the certificate must be Base-64 encoded, or the string representation of the certificate may become corrupted and uninterpretable.

Regardless of how you selected the certificate, once you hit the OK button, the adapter will attempt to verify that certificate selection. If successful, the subject of the certificate will be displayed in the property field. If the adapter was not able to verify the selection, a dialog box will appear instead detailing the verification error.

Note: You may also set the Accept Any field to Yes without opening the certificate selection dialog to force the adapter to unilaterally authenticate any server during the security handshake. It is strongly recommended that you use this only for testing purposes. Set the LogMode to Info to cause the adapter to report the server's credentials to Location.

SSLCert Property (Telnet Adapter)

The certificate to use for client authentication during the SSL handshake.

Data Type

Certificate

Remarks

This property is used to assign a specific certificate for SSL client authentication.

This field is used to set a Private Key Certificate.

Private key certificates may be loaded from the registry, from files in PKCS#12 format, or from a PEM file format. If you click on the ellipses, a certificate selection dialog will open. To select a private key from the system registry, select the System Store tab or the User Store tab, and highlight the appropriate registry store. The list of certificates which have private keys will be shown below.

To select a private key certificate from a file in PKCS#12 format, select the PFX Store tab. The browse button can be used to examine the file system for PKCS#12 (.pfx or .p12) certificates. If you wish to examine the certificate, provide the password in the field provided and click on the Open button to examine the file store for certificates present. To load a certificate from PEM files, select the PEM tab. Like the PFX file selection, you can specify the password and click the Open button to examine the certificates in the PEM store, or you may paste any PEM data stored in memory.

Regardless of how you selected the certificate, once you hit the OK button, the adapter will attempt to verify that certificate selection. If successful, the subject of the certificate will be displayed in the property field. If the adapter was not able to verify the selection, a dialog box will appear instead detailing the verification error.

SSLStartMode Property (Telnet Adapter)

Determines how the component starts the SSL negotiation.

Data Type

Enumeration

Possible Values

Automatic (0)
Implicit (1)
Explicit (2)
None (3)


Default Value

3

Remarks

The SSLStartMode property may have one of the following values:

AutomaticIf the remote port is set to the standard plaintext port of the protocol (where applicable), the adapter will behave the same as if SSLStartMode is set to Explicit. In all other cases, SSL negotiation will be implicit (Implicit).
ImplicitThe SSL negotiation will start immediately after the connection is established.
ExplicitThe adapter will first connect in plaintext, and then explicitly start SSL negotiation through a protocol command such as STARTTLS.
None (Default)No SSL negotiation, no SSL security. All communication will be in plaintext mode.
The default value is None.

SSOAffiliate Property (Telnet Adapter)

Specifies the name of the SSO Affiliate Application.

Data Type

String

Default Value

""

Remarks

This property allows the adapter to load credentials from an Enterprise Single Sign-On secret server.

Timeout Property (Telnet Adapter)

A timeout for the component.

Data Type

Integer

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion, or an error condition is encountered.

If Timeout is set to a positive value, the adapter will wait for the operation to complete before returning control.

If Timeout expires, and the operation is not yet complete, the adapter fails with an error.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when data is successfully sent or received.

Optionally, the behavior of the adapter may be changed to absolute timeouts, i.e. the adapter will wait for a maximum of Timeout seconds since the beginning of the operation, without extending the timeout period during communications.

This behavior is controlled by the AbsoluteTimeout configuration setting.

The default value for the Timeout property is 60 (seconds).

TransmitBatchMode Property (Telnet Adapter)

How the transmitter processes batches.

Data Type

Enumeration

Possible Values

Parallel (0)
Serial (1)


Default Value

0

Remarks

This property controls how the transmitter processes message batches:

ParallelThe adapter will process however many batches the BizTalk Message Engine sends it.

The number of maximum concurrent batches may be controlled by the MaxThreads property.

SerialThe adapter will queue batches from the BizTalk Message Engine and process them one at a time.

This property can only be configured through the adapter's static handler property page in the BizTalk Server administration console.

This property is not available in the Receiver.

TransportLog Property (Telnet Adapter)

Tells the component where and how to report information about its operations.

Data Type

Log

Remarks

This is a Log type property which contains fields describing how and where the adapter will record information about its execution.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

URI Property (Telnet Adapter)

The Uniform Resource Identifier (URI) of the send port or receive location.

Data Type

String

Default Value

""

Remarks

This property specifies a URI for the send port or receive location. Setting this property is optional.

By default the adapter will automatically generate a URI. You may choose to specify your own value here to be used in place of the generated URI.

If this value is specified it must begin with the correct prefix, as seen in the default value.

User Property (Telnet Adapter)

The username to use for authentication.

Data Type

String

Default Value

""

Remarks

This property specifies the username used during authentication.

Certificate Type

The digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

Store
String

Default Value: "MY"

The name of the certificate store for the client certificate.

The StoreType field specifies the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field in order to specify client certificates. If Store has a value, and Subject is set, a search for a certificate is initiated. Please refer to the Subject field for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

MYA certificate store holding personal certificates with their associated private keys.
CACertifying authority certificates.
ROOTRoot certificates.
SPCSoftware publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

If the provider is OpenSSL, the certificate store is a file containing a certificate and a private key. This property must be set to the name of the file.

StorePassword
String

Default Value: ""

If the certificate store is of a type that requires a password, this property is used to specify that password in order to open the certificate store.

StoreType
CertStoreTypes

Default Value: 0

The type of certificate store for this certificate.

The adapter supports both public and private keys in a variety of formats. When the cstAuto value is used, the adapter will automatically determine the type. This field can take one of the following values:

0 (cstUser - default)For Windows, this specifies that the certificate store is a certificate store owned by the current user.

Note: This store type is not available in Java.

1 (cstMachine)For Windows, this specifies that the certificate store is a machine store.

Note: This store type is not available in Java.

2 (cstPFXFile)The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)The certificate store is the name of a Java Key Store (JKS) file containing certificates.

Note: This store type is only available in Java.

5 (cstJKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.

Note: This store type is only available in Java.

6 (cstPEMKeyFile)The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).

Note: This store type is only available in Java and .NET.

22 (cstBCFKSBlob)The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.

Note: This store type is only available in Java and .NET.

23 (cstPKCS11)The certificate is present on a physical security key accessible via a PKCS#11 interface.

To use a security key, the necessary data must first be collected using the CERTMGR adapter. The ListStoreCertificates method may be called after setting CertStoreType to cstPKCS11, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's CertEncoded parameter may be saved for later use.

When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN.

Code Example. SSH Authentication with Security Key: certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);

99 (cstAuto)The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Subject
String

Default Value: ""

The subject of the certificate used for client authentication.

When this property is set, a search is performed in the current certificate store certificate with matching subject.

If an exact match is not found, the store is searched for subjects containing the value of the property.

When setting the property to a partial subject, CN= should be omitted. For example, the following code would find the certificate with subject CN=Test Certificate, OU=People, C=US

Example (Searching with partial subject)

Control.CertSubject = "Test"

If a match is not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

If a matching certificate is found, Subject is set to the full subject of the matching certificate.

Thumbprint
String (read-only)

Default Value: ""

The thumbprint of the certificate.

This field is used to specify the thumbprint of the certificate. When there are multiple certificates in the store that have the same subject, the thumbprint will be used to distinguish between them.

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Certificate();

Creates a instance whose properties can be set.

public Certificate(string certificateFile);

Opens CertificateFile and reads out the contents as an X509 public key.

public Certificate(byte[] certificateData);

Parses CertificateData as an X509 public key.

public Certificate(CertStoreTypes certStoreType, string store, string storePassword, string subject);

CertStoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

After the store has been successfully opened, the constructor will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).

public Certificate(CertStoreTypes certStoreType, string store, string storePassword, byte[] encoded);

CertStoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

After the store has been successfully opened, the constructor will load Encoded as an X509 certificate and search the opened store for a corresponding private key.

public Certificate(CertStoreTypes certStoreType, byte[] storeBlob, string storePassword, string subject);

CertStoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a string (binary- or base64-encoded) containing the certificate store. StorePassword is the password used to protect the store.

After the store has been successfully opened, the constructor will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).

public Certificate(CertStoreTypes certStoreType, byte[] storeBlob, string storePassword, byte[] encoded);

CertStoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a string (binary- or base64-encoded) containing the certificate store. StorePassword is the password used to protect the store.

After the store has been successfully opened, the constructor will load Encoded as an X509 certificate and search the opened store for a corresponding private key.

Firewall Type

The firewall the component will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall such as the firewall Host and the FirewallType.

Fields

AutoDetect
Boolean

Default Value: False

Tells the adapter whether or not to automatically detect and use firewall system settings, if available.

FirewallType
FirewallTypes

Default Value: 0

Determines the type of firewall to connect through. The applicable values are the following:

fwNone (0)No firewall (default setting).
fwTunnel (1)Connect through a tunneling proxy. Port is set to 80.
fwSOCKS4 (2)Connect through a SOCKS4 Proxy. Port is set to 1080.
fwSOCKS5 (3)Connect through a SOCKS5 Proxy. Port is set to 1080.

Host
String

Default Value: ""

Name or IP address of firewall (optional). If a Host is given, requested connections will be authenticated through the specified firewall when connecting.

If the Host field is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the Host field is set to the corresponding address. If the search is not successful, an error is returned.

Password
String

Default Value: ""

A password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password fields are used to connect and authenticate to the given firewall. If the authentication fails, a trappable error is fired.

Port
Integer

Default Value: 0

The TCP port for the firewall Host. See the description of the Host field for details.

Note that the Port is set automatically when FirewallType is set to a valid value. See the description of the FirewallType field for details.

User
String

Default Value: ""

A user name if authentication is to be used connecting through a firewall. If the Host is specified, the User and Password fields are used to connect and authenticate to the given Firewall. If the authentication fails, a trappable error is fired.

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Firewall();

Log Type

A log where the component will record information about its operations.

Remarks

This describes how and where the adapter will record information describing its execution.

Fields

Location
String

Default Value: "Application"

This field describes the location where the logging information is to be written.

If the EventLog LogType has been chosen, this field must contain the name of the Event Log to which the information should be written. The default value for this field is "Application". If a value other than "Application" is set the computer must be restarted for the change to take effect. Note that the same event log must be used for all send ports and receive locations that use the same adapter.

If the File LogType has been chosen, this field must contain the location of the file to write logging information to on the file system.

The adapter also supports logging to files based on the current date and time. This allows for log files to be organized by days, months, or other intervals as specified. When specifying a log filename include a valid .NET date and time format string within the < and > characters. For instance C:\logs\sftp_<yyyyMMdd>.log or C:\logs\as2_<yyyyMMdd>T<hhmm>.log.

LogMode
LogModes

Default Value: 3

This field controls what information the adapter logs. The possible values have the following affect on the adapter's behavior:

VerboseThe adapter will report all information regarding the transport.
Info The adapter will report all major operations, as well as all warnings and errors.
WarningThe adapter will report any conditions that could result in unpredictable behavior as well as errors.
ErrorThe adapter will report all errors that prevent normal operations from completing.
FatalThe adapter will report only serious errors that cause the adapter to completely stop functioning.

LogType
LogTypes

Default Value: 1

This property controls where the adapter will log the information. The possible values have the following affect on the adapter's behavior:

NoneThe adapter will not report any logging information.
EventLogThe adapter will report all logging information to the event log. The specific event log must be defined in the Location field when this type is selected.
FileThe adapter will report all logging information to a file. The desired file must be specified in the Location field when this type has been selected.

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Log();
public Log(LogTypes logType, string location, LogModes logMode);

Proxy Type

The proxy the component will connect to.

Remarks

When connecting through a proxy, this type is used to specify different properties of the proxy such as the Server and the AuthScheme.

Fields

AuthScheme
ProxyAuthSchemes

Default Value: 0

Use the AuthScheme field to tell the adapter which type of authorization to perform when connecting to the proxy. This is only used when the User and Password fields are set.

AuthScheme should be set to authNone (3) when no authentication is expected.

By default, AuthScheme is authBasic (0), and if the User and Password fields are set, the component will attempt basic authentication. If AuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If AuthScheme is set to authProprietary (2), then the authorization token will not be generated by the adapter. Look at the configuration file for the adapter being used to find more information about manually setting this token.

If AuthScheme is set to authNtlm (4), NTLM authentication will be used. This option is only available in the SSL package.

For security reasons, setting this property will clear the values of User and Password.

AutoDetect
Boolean

Default Value: False

Tells the adapter whether or not to automatically detect and use proxy system settings, if available.

Password
String

Default Value: ""

A password if authentication is to be used for the proxy.

If AuthScheme is set to Basic Authentication, the User and Password are Base64 encoded and the proxy authentication token will be generated in the form "Basic [encoded-user-password]".

If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server.

If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation.

Port
Integer

Default Value: 80

The TCP port for the proxy Server (default 80). See the description of the Server field for details.

Server
String

Default Value: ""

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the Server field is set to a Domain Name, a DNS request is initiated and upon successful termination of the request, the Server field is set to the corresponding address. If the search is not successful, an error is returned.

SSL
ProxySSLTypes

Default Value: 0

Determines when to use SSL for the connection to the proxy. The applicable values are the following:

psAutomatic (0)Default setting. The connection to the Server is SSL-enabled for 'https' URL-s, and non SSL-enabled for other URL-s.
psAlways (1)The connection is always SSL-enabled.
psNever (2)The connection is not SSL-enabled.
psTunnel (3)The connection is through a tunneling (HTTP) proxy.

User
String

Default Value: ""

A user name, if authentication is to be used for the proxy.

If AuthScheme is set to Basic Authentication, the User and Password are Base64 encoded and the proxy authentication token will be generated in the form "Basic [encoded-user-password]".

If AuthScheme is set to Digest Authentication, the User and Password fields are used to respond to the Digest Authentication challenge from the server.

If AuthScheme is set to NTLM Authentication, the User and Password fields are used to authenticate through NTLM negotiation.

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Proxy();
public Proxy(string server, int port);
public Proxy(string server, int port, string user, string password);

Config Settings (Telnet Adapter)

The adapter accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the adapter, access to these internal properties is provided through the Other property.

Telnet Config Settings

EOL:   The EOL used to parse the response.

This setting specifies the EOL (End of Line) character sequence. This is used to break up the response into lines for additional parsing. In most cases this value does not need to be set. Depending on the line endings on the remote system it may be helpful to set this value to the corresponding line ending value (for instance "\n" for Unix environments). The default value is "\r\n" (CrLf).

ReturnPrompt:   Whether to include the prompt in response data.

This setting determines whether the ShellPrompt returned by the server after a command has finished is included in the CommandResponse value. The default value is False.

ReturnScriptResponse:   Whether to include script output in response data.

Whether to include the server responses from BeforeExecute and AfterExecute in the CommandResponse value. If set to True, any output returned by the server in response to commands in the scripting properties BeforeExecute and AfterExecute is included in CommandResponse. If set to False, any script output is ignored. The default value is False.

TerminalType:   The terminal type.

If specified, the adapter will negotiate the terminal type sub-option when connecting. The value specified should be the name of the terminal type, for instance: "ANSI" or "IBMPC". By default this value is empty and the terminal type sub-option is not negotiated.

SSL Config Settings

ReuseSSLSession:   Determines if the SSL session is reused.

If set to true, the adapter will reuse the context if and only if the following criteria are met:

  • The target host name is the same.
  • The system cache entry has not expired (default timeout is 10 hours).
  • The application process that calls the function is the same.
  • The logon session is the same.
  • The instance of the adapter is the same.

SSLCipherStrength:   The minimum cipher strength used for bulk encryption.

This minimum cipher strength largely dependent on the security modules installed on the system. If the cipher strength specified is not supported, an error will be returned when connections are initiated.

Please note that this setting contains the minimum cipher strength requested from the security library.

Use this setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.

SSLEnabledCipherSuites:   The cipher suite to be used in an SSL negotiation.

The enabled cipher suites to be used in SSL negotiation.

By default, the enabled cipher suites will include all available ciphers ("*").

The special value "*" means that the adapter will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.

Multiple cipher suites are separated by semicolons.

Example values when UseInternalSecurityAPI is False (default): // The "Other" property could contain ONE of the following lines: SSLEnabledCipherSuites=* SSLEnabledCipherSuites=CALG_AES_256 SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES Possible values when UseInternalSecurityAPI is False (default) include:

  • CALG_3DES
  • CALG_3DES_112
  • CALG_AES
  • CALG_AES_128
  • CALG_AES_192
  • CALG_AES_256
  • CALG_AGREEDKEY_ANY
  • CALG_CYLINK_MEK
  • CALG_DES
  • CALG_DESX
  • CALG_DH_EPHEM
  • CALG_DH_SF
  • CALG_DSS_SIGN
  • CALG_ECDH
  • CALG_ECDH_EPHEM
  • CALG_ECDSA
  • CALG_ECMQV
  • CALG_HASH_REPLACE_OWF
  • CALG_HUGHES_MD5
  • CALG_HMAC
  • CALG_KEA_KEYX
  • CALG_MAC
  • CALG_MD2
  • CALG_MD4
  • CALG_MD5
  • CALG_NO_SIGN
  • CALG_OID_INFO_CNG_ONLY
  • CALG_OID_INFO_PARAMETERS
  • CALG_PCT1_MASTER
  • CALG_RC2
  • CALG_RC4
  • CALG_RC5
  • CALG_RSA_KEYX
  • CALG_RSA_SIGN
  • CALG_SCHANNEL_ENC_KEY
  • CALG_SCHANNEL_MAC_KEY
  • CALG_SCHANNEL_MASTER_HASH
  • CALG_SEAL
  • CALG_SHA
  • CALG_SHA1
  • CALG_SHA_256
  • CALG_SHA_384
  • CALG_SHA_512
  • CALG_SKIPJACK
  • CALG_SSL2_MASTER
  • CALG_SSL3_MASTER
  • CALG_SSL3_SHAMD5
  • CALG_TEK
  • CALG_TLS1_MASTER
  • CALG_TLS1PRF
Example values when UseInternalSecurityAPI is True: // The "Other" property could contain ONE of the following lines: SSLEnabledCipherSuites=* SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_DH_ANON_WITH_AES_128_CBC_SHA Possible values when UseInternalSecurityAPI is True include:
  • TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
  • TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
  • TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA
  • TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
  • TLS_DHE_DSS_WITH_DES_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
  • TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
  • TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA
  • TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
  • TLS_DHE_RSA_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_AES_256_GCM_SHA384
  • TLS_RSA_WITH_AES_128_GCM_SHA256
  • TLS_RSA_WITH_3DES_EDE_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA
  • TLS_RSA_WITH_AES_128_CBC_SHA256
  • TLS_RSA_WITH_AES_256_CBC_SHA
  • TLS_RSA_WITH_AES_256_CBC_SHA256
  • TLS_RSA_WITH_DES_CBC_SHA
  • TLS_RSA_WITH_RC4_128_MD5
  • TLS_RSA_WITH_RC4_128_SHA

If SSLEnabledProtocols is configured to use TLS 1.3 the following values are supported:

  • TLS_AES_128_GCM_SHA256
  • TLS_AES_256_GCM_SHA384

SSLEnabledCipherSuites is used together with SSLCipherStrength.

SSLEnabledProtocols:   Used to enable/disable the supported security protocols.

Used to enable/disable the supported security protocols.

Not all supported protocols are enabled by default (the value of this setting is 4032). If you want more granular control over the enabled protocols, you can set this property to the binary 'OR' of one or more of the following values:

TLS1.312288 (Hex 3000) (Experimental)
TLS1.23072 (Hex C00) (Default)
TLS1.1768 (Hex 300) (Default)
TLS1 192 (Hex C0) (Default)
SSL3 48 (Hex 30)
SSL2 12 (Hex 0C)

Note: TLS 1.1 and TLS1.2 support are only available starting with Windows 7.

Note: Enabling TLS 1.3 will automatically set UseInternalSecurityAPI to True.

SSLIncludeCertChain:   Whether the entire certificate chain is included in the SSLServerAuthentication event.

This setting specifies whether the transport log contains the full certificate chain. By default this value is False and only the leaf certificate will be present.

If set to True all certificates returned by the server will be present in the transport log. This includes the leaf certificate, any intermediate certificate, and the root certificate.

Note: When UseInternalSecurityAPI is set to True this value is automatically set to True. This is needed for proper validation when using the internal provider.

SSLSecurityFlags:   Flags that control certificate verification.

The following flags are defined (specified in hexadecimal notation). They can be or-ed together to exclude multiple conditions:

0x00000001Ignore time validity status of certificate.
0x00000002Ignore time validity status of CTL.
0x00000004Ignore non-nested certificate times.
0x00000010Allow unknown Certificate Authority.
0x00000020Ignore wrong certificate usage.
0x00000100Ignore unknown certificate revocation status.
0x00000200Ignore unknown CTL signer revocation status.
0x00000400Ignore unknown Certificate Authority revocation status.
0x00000800Ignore unknown Root revocation status.
0x00008000Allow test Root certificate.
0x00004000Trust test Root certificate.
0x80000000Ignore non-matching CN (certificate CN not-matching server name).

TLS12SignatureAlgorithms:   Defines the allowed TLS 1.2 signature algorithms when UseInternalSecurityAPI is True.

This setting specifies the allowed server certificate signature algorithms when UseInternalSecurityAPI is True and SSLEnabledProtocols is set to allow TLS 1.2.

When specified the adapter will verify that the server certificate signature algorithm is among the values specified in this setting. If the server certificate signature algorithm is unsupported the adapter will fail with an error.

The format of this value is a comma separated list of hash-signature combinations. For instance: // The "Other" could contain ALL of these lines: UseInternalSecurityAPI=true SSLEnabledProtocols=3072 TLS12SignatureAlgorithms=sha1-rsa,sha1-dsa,sha256-rsa,sha256-dsa The default value for this setting is "sha1-rsa,sha1-dsa,sha224-rsa,sha224-dsa,sha256-rsa,sha256-dsa,sha384-rsa,sha384-dsa,sha512-rsa,sha512-dsa".

In order to not restrict the server's certificate signature algorithm, specify an empty string as the value for this setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.

TLS12SupportedGroups:   The supported groups for ECC.

This setting specifies a comma separated list of named groups used in TLS 1.2 for ECC.

The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.

When using TLS 1.2 and UseInternalSecurityAPI is set to True, the values refer to the supported groups for ECC. The following values are supported:

  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)

TLS13KeyShareGroups:   The groups for which to pregenerate key shares.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. The groups specified here will have key share data pregenerated locally before establishing a connection. This can prevent an additional round trip during the handshake if the group is supported by the server.

The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result only some groups are included by default in this setting.

Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used which is not present in this list it will incur an additional round trip and time to generate the key share for that group.

In most cases this setting does not need to be modified. This should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448"
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1"
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096"
  • "ffdhe_6144"
  • "ffdhe_8192"

TLS13SignatureAlgorithms:   The allowed certificate signature algorithms.

This setting holds a comma separated list of allowed signature algorithms. Possible values are:

  • "rsa_pkcs1_sha256" (default)
  • "rsa_pkcs1_sha384" (default)
  • "rsa_pkcs1_sha512" (default)
The default value is rsa_pkcs1_sha256,rsa_pkcs1_sha384,rsa_pkcs1_sha512. This setting is only applicable when SSLEnabledProtocols includes TLS 1.3.
TLS13SupportedGroups:   The supported groups for (EC)DHE key exchange.

This setting specifies a comma separated list of named groups used in TLS 1.3 for key exchange. This setting should only be modified if there is a specific reason to do so.

The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192

The values are ordered from most preferred to least preferred. The following values are supported:

  • "ecdhe_x25519" (default)
  • "ecdhe_x448" (default)
  • "ecdhe_secp256r1" (default)
  • "ecdhe_secp384r1" (default)
  • "ecdhe_secp521r1" (default)
  • "ffdhe_2048" (default)
  • "ffdhe_3072" (default)
  • "ffdhe_4096" (default)
  • "ffdhe_6144" (default)
  • "ffdhe_8192" (default)

General Config Settings

AbsoluteTimeout:   Determines whether timeouts are inactivity timeouts or absolute timeouts.

If AbsoluteTimeout is set to True, any method which does not complete within Timeout seconds will be aborted. By default, AbsoluteTimeout is False, and the timeout is an inactivity timeout.

LocalHost:   The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

The LocalHost configuration contains the name of the local host as obtained by the Gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multihomed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the adapter initiate connections (or accept in the case of server adapters) only through that interface.

If the adapter is connected, the LocalHost configuration shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).

TcpNoDelay:   Whether or not to delay when sending packets.

When set to True, the socket will send all data that are ready to send at once. When set to False, the socket will send smaller buffered packets of data at small intervals. This is known as the Nagle algorithm.

By default, this configuration setting is set to False.

UseInternalSecurityAPI:   Whether or not to use the system security libraries or an internal implementation.

When set to False, the adapter will use the system security libraries by default to perform cryptographic functions where applicable. In this case, calls to unmanaged code will be made. In certain environments, this is not desirable. To use a completely managed security implementation, set this setting to True.

Setting this configuration setting to True tells the adapter to use the internal implementation instead of using the system security libraries.

On Windows, this setting is set to False by default. On Linux/macOS, this setting is set to True by default.

If using the .NET Standard Library, this setting will be True on all platforms. The .NET Standard library does not support using the system security libraries.

Note: This setting is static. The value set is applicable to all adapters used in the application.

When this value is set, the product's system dynamic link library (DLL) is no longer required as a reference, as all unmanaged code is stored in that file.

Supported Macros

The adapter also supports the following Macros. These values are not case sensitive and would be supplied to a property in the form %MacroName%.

TempThis is resolved to the full path to the system's temporary directory. MessageIDGlobally unique identifier (GUID) of the message in BizTalk Server. SourceFileNameThe original file name. This includes the extension and excludes the file path, for example, Sample.xml SourceFileNameNoExtThe original file name without the extension or file path, for example, Sample RemoteFileNameThe name of the file as it was uploaded to the remote server. This includes the extension and excludes the file path, for example, Sample.xml. Valid only for AS3, FTP, and SFTP Send Adapters. DestinationPartyName of the destination party. DestinationPartyQualifierQualifier of the destination party. SourcePartyName of the source party. SourcePartyQualifierQualifier of the source party. DateTime:CustomFormatThis special value allows you to specify your own custom time format. For instance DateTime:yyyy would be resolved to the 4 digit year. DateThe date format yyyy-MM-dd. DateTimeThe date format yyyy-MM-ddThhmmss. TimeThe date format hhmmss. DateTime_BTS2000The date format yyyyMMddhhmmssf. DateTime.TZThe date format yyyy-MM-ddThhmmsszzz. Time.TZThe date format hhmmsszzz. Property#<Schema>#<Name>This special value allows you to include a property from the incoming message. For instance "PROPERTY#http://schemas.microsoft.com/BizTalk/2003/system-properties#ReceivePortName" would resolve to the ReceivePortName property of the message.