NetCode Pipeline Component

The NetCode Pipeline Component can be used to encode or decode data using a variety of web standards.

Remarks

The NetCode Pipeline Component supports the following encoding standards:

Hex
URL
Base64
Base64URL
Base32
HTML
Quoted-Printable (QP)
UTF7
UTF8
Japanese Industrial Standards (JIS)
YEncode
HMAC
MD5 Hash
SHA1 Hash
SHA256 Hash

To configure the adapter, simply set the Format property to the appropriate encoding/decoding standard.

Encoder Property List

The following is the full list of the properties of the encoder Pipeline Component with short descriptions. Click on the links for further details.


Format	The type of encoding used.
Other	Defines a set of configuration settings to be used by the pipeline component.
RuntimeLicense	Specifies the component runtime license key.
TempPath	The path to which temporary files are written at runtime.
TransportLog	Tells the component where and how to report information about its operations.

Decoder Property List

The following is the full list of the properties of the decoder Pipeline Component with short descriptions. Click on the links for further details.


Format	The type of encoding used.
Other	Defines a set of configuration settings to be used by the pipeline component.
RuntimeLicense	Specifies the component runtime license key.
TempPath	The path to which temporary files are written at runtime.
TransportLog	Tells the component where and how to report information about its operations.

Config Settings

The following is a list of config settings for the Pipeline Component with short descriptions. Click on the links for further details.


Base64LineBreak	Tells the component whether to include line breaks in Base64 encoded content or not.
EncodeHash	Whether the hash value is hex encoded.
HMACAlgorithm	The hash algorithm to use when generating a Hash-based Message Authentication Code (HMAC).
HMACKey	A key to use when generating a Hash-based Message Authentication Code (HMAC).
PipelineOptions	Options defining the validation and protection functionality of the pipeline component.
UseExtendedHexBase32	Specifies whether or not the Extended Hex alphabet is used.
UseModifiedUTF7	Specifies whether or not a modified form of UTF-7 for IMAP mailbox naming is used.

Format Property (NetCode Pipeline component)

The type of encoding used.

Data Type

Enumeration

Possible Values

Base 64 (1)
QP (2)
URL (3)
JIS (4)
YEncode (5)
MD5Hash (6)
SHA1Hash (7)
Hex (8)
HTML (9)
HMAC (10)
UTF8 (11)
UTF7 (12)
Base 32 (13)
Base 64URL (14)
SHA256Hash (15)

Default Value

Remarks

The following formats are only supported in the Encoder:

MD5Hash
SHA1Hash
HMAC
SHA256Hash

Other Property (NetCode Pipeline component)

Defines a set of configuration settings to be used by the pipeline component.

Data Type

String

Default Value

Remarks

The pipeline component accepts one or more configuration settings. These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the pipeline component, access to these internal properties is provided through the Other property.

The Other property may be set to one or more configuration settings (name/value pairs). Set one setting per line. For example: configname1=value1 configname2=value2

RuntimeLicense Property (NetCode Pipeline component)

Specifies the component runtime license key.

Data Type

String

Default Value

Remarks

You can use the RuntimeLicense property to set the runtime key for the adapter license.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

TempPath Property (NetCode Pipeline component)

The path to which temporary files are written at runtime.

Data Type

String

Default Value

Remarks

If you are planning on working with binary files or large files, it is recommended that you set a valid path for this property. When set to a valid path this property tells the adapter to use temp files when performing operations. If this is not set, all operations are done in memory.

This property accepts the "%TEMP%" macro, which will be replaced with the default system temporary directory at runtime.

TransportLog Property (NetCode Pipeline component)

Tells the component where and how to report information about its operations.

Data Type

Log

Remarks

This is a Log type property which contains fields describing how and where the adapter will record information about its execution.

This property may be configured on the adapter's static handler property page in the BizTalk Server administration console.

Certificate Type

The digital certificate being used.

Remarks

This type describes the current digital certificate. The certificate may be a public or private key. The fields are used to identify or select certificates.

Fields

Store
String
Default Value: "MY"

The name of the certificate store for the client certificate.

The StoreType field specifies the type of the certificate store specified by Store. If the store is password protected, specify the password in StorePassword.

Store is used in conjunction with the Subject field in order to specify client certificates. If Store has a value, and Subject is set, a search for a certificate is initiated. Please refer to the Subject field for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:


MY	A certificate store holding personal certificates with their associated private keys.
CA	Certifying authority certificates.
ROOT	Root certificates.
SPC	Software publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

If the provider is OpenSSL, the certificate store is a file containing a certificate and a private key. This property must be set to the name of the file.

StorePassword
String
Default Value: ""

If the certificate store is of a type that requires a password, this property is used to specify that password in order to open the certificate store.

StoreType
CertStoreTypes
Default Value: 0

The type of certificate store for this certificate.

The adapter supports both public and private keys in a variety of formats. When the cstAuto value is used, the adapter will automatically determine the type. This field can take one of the following values:


0 (cstUser - default)	For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java.
1 (cstMachine)	For Windows, this specifies that the certificate store is a machine store. Note: This store type is not available in Java.
2 (cstPFXFile)	The certificate store is the name of a PFX (PKCS#12) file containing certificates.
3 (cstPFXBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format.
4 (cstJKSFile)	The certificate store is the name of a Java Key Store (JKS) file containing certificates. Note: This store type is only available in Java.
5 (cstJKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format. Note: This store type is only available in Java.
6 (cstPEMKeyFile)	The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
7 (cstPEMKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate.
8 (cstPublicKeyFile)	The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
9 (cstPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate.
10 (cstSSHPublicKeyBlob)	The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key.
11 (cstP7BFile)	The certificate store is the name of a PKCS#7 file containing certificates.
12 (cstP7BBlob)	The certificate store is a string (binary) representing a certificate store in PKCS#7 format.
13 (cstSSHPublicKeyFile)	The certificate store is the name of a file that contains an SSH-style public key.
14 (cstPPKFile)	The certificate store is the name of a file that contains a PPK (PuTTY Private Key).
15 (cstPPKBlob)	The certificate store is a string (binary) that contains a PPK (PuTTY Private Key).
16 (cstXMLFile)	The certificate store is the name of a file that contains a certificate in XML format.
17 (cstXMLBlob)	The certificate store is a string that contains a certificate in XML format.
18 (cstJWKFile)	The certificate store is the name of a file that contains a JWK (JSON Web Key).
19 (cstJWKBlob)	The certificate store is a string that contains a JWK (JSON Web Key).
21 (cstBCFKSFile)	The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store). Note: This store type is only available in Java and .NET.
22 (cstBCFKSBlob)	The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format. Note: This store type is only available in Java and .NET.
23 (cstPKCS11)	The certificate is present on a physical security key accessible via a PKCS#11 interface. To use a security key, the necessary data must first be collected using the CERTMGR adapter. The ListStoreCertificates method may be called after setting CertStoreType to `cstPKCS11`, CertStorePassword to the PIN, and CertStore to the full path of the PKCS#11 DLL. The certificate information returned in the CertList event's `CertEncoded` parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the Store and set StorePassword to the PIN. Code Example. SSH Authentication with Security Key: `certmgr.CertStoreType = CertStoreTypes.cstPKCS11; certmgr.OnCertList += (s, e) => { secKeyBlob = e.CertEncoded; }; certmgr.CertStore = @"C:\Program Files\OpenSC Project\OpenSC\pkcs11\opensc-pkcs11.dll"; certmgr.CertStorePassword = "123456"; //PIN certmgr.ListStoreCertificates(); sftp.SSHCert = new Certificate(CertStoreTypes.cstPKCS11, secKeyBlob, "123456", "*"); sftp.SSHUser = "test"; sftp.SSHLogon("myhost", 22);`
99 (cstAuto)	The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically.

Subject
String
Default Value: ""

The subject of the certificate used for client authentication.

When this property is set, a search is performed in the current certificate store certificate with matching subject.

If an exact match is not found, the store is searched for subjects containing the value of the property.

When setting the property to a partial subject, CN= should be omitted. For example, the following code would find the certificate with subject CN=Test Certificate, OU=People, C=US

Example (Searching with partial subject)

Control.CertSubject = "Test"

If a match is not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

If a matching certificate is found, Subject is set to the full subject of the matching certificate.

Thumbprint
String (read-only)
Default Value: ""

The thumbprint of the certificate.

This field is used to specify the thumbprint of the certificate. When there are multiple certificates in the store that have the same subject, the thumbprint will be used to distinguish between them.

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Certificate();

Creates a instance whose properties can be set.

public Certificate(string certificateFile);

Opens CertificateFile and reads out the contents as an X509 public key.

public Certificate(byte[] certificateData);

Parses CertificateData as an X509 public key.

public Certificate(CertStoreTypes certStoreType, string store, string storePassword, string subject);

CertStoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a file containing the certificate store. StorePassword is the password used to protect the store.

After the store has been successfully opened, the constructor will attempt to find the certificate identified by Subject . This can be either a complete or a substring match of the X509 certificate's subject Distinguished Name (DN).

public Certificate(CertStoreTypes certStoreType, string store, string storePassword, byte[] encoded);

After the store has been successfully opened, the constructor will load Encoded as an X509 certificate and search the opened store for a corresponding private key.

public Certificate(CertStoreTypes certStoreType, byte[] storeBlob, string storePassword, string subject);

CertStoreType identifies the type of certificate store to use. See for descriptions of the different certificate stores. Store is a string (binary- or base64-encoded) containing the certificate store. StorePassword is the password used to protect the store.

public Certificate(CertStoreTypes certStoreType, byte[] storeBlob, string storePassword, byte[] encoded);

After the store has been successfully opened, the constructor will load Encoded as an X509 certificate and search the opened store for a corresponding private key.

Firewall Type

The firewall the component will connect through.

Remarks

When connecting through a firewall, this type is used to specify different properties of the firewall such as the firewall Host and the FirewallType.

Fields

AutoDetect
Boolean
Default Value: False

Tells the adapter whether or not to automatically detect and use firewall system settings, if available.

FirewallType
FirewallTypes
Default Value: 0

Determines the type of firewall to connect through. The applicable values are the following:


fwNone (0)	No firewall (default setting).
fwTunnel (1)	Connect through a tunneling proxy. Port is set to 80.
fwSOCKS4 (2)	Connect through a SOCKS4 Proxy. Port is set to 1080.
fwSOCKS5 (3)	Connect through a SOCKS5 Proxy. Port is set to 1080.

Host
String
Default Value: ""

Name or IP address of firewall (optional). If a Host is given, requested connections will be authenticated through the specified firewall when connecting.

If the Host field is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the Host field is set to the corresponding address. If the search is not successful, an error is returned.

Password
String
Default Value: ""

A password if authentication is to be used when connecting through the firewall. If Host is specified, the User and Password fields are used to connect and authenticate to the given firewall. If the authentication fails, a trappable error is fired.

Port
Integer
Default Value: 0

The TCP port for the firewall Host. See the description of the Host field for details.

Note that the Port is set automatically when FirewallType is set to a valid value. See the description of the FirewallType field for details.

User
String
Default Value: ""

A user name if authentication is to be used connecting through a firewall. If the Host is specified, the User and Password fields are used to connect and authenticate to the given Firewall. If the authentication fails, a trappable error is fired.

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Firewall();

Log Type

A log where the component will record information about its operations.

Remarks

This describes how and where the adapter will record information describing its execution.

Fields

Location
String
Default Value: "Application"

This field describes the location where the logging information is to be written.

If the EventLog LogType has been chosen, this field must contain the name of the Event Log to which the information should be written. The default value for this field is "Application". If a value other than "Application" is set the computer must be restarted for the change to take effect. Note that the same event log must be used for all send ports and receive locations that use the same adapter.

If the File LogType has been chosen, this field must contain the location of the file to write logging information to on the file system.

The adapter also supports logging to files based on the current date and time. This allows for log files to be organized by days, months, or other intervals as specified. When specifying a log filename include a valid .NET date and time format string within the < and > characters. For instance C:\logs\sftp_<yyyyMMdd>.log or C:\logs\as2_<yyyyMMdd>T<hhmm>.log.

LogMode
LogModes
Default Value: 3

This field controls what information the adapter logs. The possible values have the following affect on the adapter's behavior:


Verbose	The adapter will report all information regarding the transport.
Info	The adapter will report all major operations, as well as all warnings and errors.
Warning	The adapter will report any conditions that could result in unpredictable behavior as well as errors.
Error	The adapter will report all errors that prevent normal operations from completing.
Fatal	The adapter will report only serious errors that cause the adapter to completely stop functioning.

LogType
LogTypes
Default Value: 1

This property controls where the adapter will log the information. The possible values have the following affect on the adapter's behavior:


None	The adapter will not report any logging information.
EventLog	The adapter will report all logging information to the event log. The specific event log must be defined in the Location field when this type is selected.
File	The adapter will report all logging information to a file. The desired file must be specified in the Location field when this type has been selected.

Constructors

Constructors are only relevant when configuring adapters in orchestrations.

public Log();

public Log(LogTypes logType, string location, LogModes logMode);

Config Settings (NetCode Pipeline component)

The adapter accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the adapter, access to these internal properties is provided through the Other property.

EzCrypt Config Settings

Base64LineBreak: Tells the adapter whether to include line breaks in Base64 encoded content or not.

By default, when encoding to Base64 format, the component will insert line breaks every 76 characters. Setting this config to false will cause these line breaks to be omitted from the Base64 encoded content. The default value is true.

EncodeHash: Whether the hash value is hex encoded.

This setting determines whether the MD5, SHA1, or SHA256 hash value is hex encoded. The default is True.

HMACAlgorithm: The hash algorithm to use when generating a Hash-based Message Authentication Code (HMAC).

HMACAlgorithm can be "SHA1" (Secure Hash Algorithm 1), "MD5" (Message Digest 5), or one of the SHA-2 algorithms mentioned below. You may truncate the hash output by specifying the desired number of bits. For instance "SHA1-96" and "MD5-96" are acceptable.

SHA-2 algorithms:

"SHA-224"
"SHA-256"
"SHA-384"
"SHA-512"

HMACKey: A key to use when generating a Hash-based Message Authentication Code (HMAC).

When Format is set to fmtHMAC, it may be necessary to supply the component with a key to use when generating the Hash-based Message Authentication Code (HMAC). This key is incorporated into the hashing process to add entropy to the resulting hash code, making the plaintext harder to guess and increasing the message security. You may also set this to a hex value, e.g. "0xAAAAAA".

PipelineOptions: Options defining the validation and protection functionality of the pipeline component.

By default the pipeline will protect (encrypt) sensitive fields such as passwords, and will validate required properties are set. In some cases it may be desirable to change this behavior. This setting may be used to disable the protection, validation, or both. Possible values are:


0 (default)	Both Protection and Validation are enabled
1	Protection is disabled. Validation is enabled.
2	Validation is disabled. Protection is enabled.
3	Validation and Protection are disabled.

UseExtendedHexBase32: Specifies whether or not the Extended Hex alphabet is used.

When Format is set to fmtBase32, this config determines whether or not to use the Extended Hex alphabet. The default value is False.

UseModifiedUTF7: Specifies whether or not a modified form of UTF-7 for IMAP mailbox naming is used.

When Format is set to fmtUTF7, this config determines whether or not to use a modified version of UTF-7 for IMAP mailbox naming. The default value is False.

Supported Macros

The adapter also supports the following Macros. These values are not case sensitive and would be supplied to a property in the form %MacroName%.

TempThis is resolved to the full path to the system's temporary directory. MessageIDGlobally unique identifier (GUID) of the message in BizTalk Server. SourceFileNameThe original file name. This includes the extension and excludes the file path, for example, Sample.xml SourceFileNameNoExtThe original file name without the extension or file path, for example, Sample RemoteFileNameThe name of the file as it was uploaded to the remote server. This includes the extension and excludes the file path, for example, Sample.xml. Valid only for AS3, FTP, and SFTP Send Adapters. DestinationPartyName of the destination party. DestinationPartyQualifierQualifier of the destination party. SourcePartyName of the source party. SourcePartyQualifierQualifier of the source party. DateTime:CustomFormatThis special value allows you to specify your own custom time format. For instance DateTime:yyyy would be resolved to the 4 digit year. DateThe date format yyyy-MM-dd. DateTimeThe date format yyyy-MM-ddThhmmss. TimeThe date format hhmmss. DateTime_BTS2000The date format yyyyMMddhhmmssf. DateTime.TZThe date format yyyy-MM-ddThhmmsszzz. Time.TZThe date format hhmmsszzz. Property#<Schema>#<Name>This special value allows you to include a property from the incoming message. For instance "PROPERTY#http://schemas.microsoft.com/BizTalk/2003/system-properties#ReceivePortName" would resolve to the ReceivePortName property of the message.