CalDAV Component

Properties   Methods   Events   Config Settings   Errors  

The CalDAV Component implements an easy-to-use interface to the Calendaring Extensions to the Web Distributed Authoring and Versioning protocol (WebDAV). In this manner the CalDAV protocol specifies a standard way of accessing, managing, and sharing calendaring and scheduling information based on the iCalendar format.

Syntax

TipwCalDAV

Remarks

The CalDAV Component supports both plaintext and SSL/TLS connections. When connecting over SSL/TLS the SSLServerAuthentication event allows you to check the server identity and other security attributes. The SSLStatus event provides information about the SSL handshake. Additional SSL related settings are also supported via the Config method.

The component allows remote management of calendar events and collections of events (the calendar itself), including creation, deletion, listing, copying, and moving. Resource locking is also supported.

The GetCalendarReport method will list the event resources contained in the calendar, and the ReportFilter can be used to limit the results returned. The EventDetails event will be fired for each matching calendar resource. You may also request a report containing a list of times that the owner is free or busy using the GetFreeBusyReport. The FreeBusy event will fire for each entry received, and the data fired in the event will also be stored in the FreeBusy property.

Single events can be added to a calendar (or updated) using the PutCalendarEvent method, and can be retrieved via the GetCalendarEvent method. Events may be copied or moved with the CopyCalendarEvent and MoveCalendarEvent.

Depth is used to determine which resources or properties are retrieved from the server. A depth of ResourceOnly will return only the resource associated with ResourceURI, or its properties. A depth of Infinity will return all resources contained within hierarchy, or their collective properties.

Note: Some servers (such as IIS 7.5) may not support a depth of Infinity by default and may return a HTTP 403 Forbidden response.

The following properties are used when creating a request with PutCalendarEvent or ExportICS, and will be filled after calling GetCalendarEvent or ImportICS. These will also be available from inside the EventDetails event, which is fired for each event received from the CalDAV server in response to a GetCalendarReport.

• Alarms
• Attendees
• Categories
• Classification
• Completed
• Created
• CustomProperties
• Depth
• Description
• DisplayName
• Duration
• EndDate
• EventType
• LastModified
• Location
• Organizer
• Priority
• Recurrence
• Sequence
• StartDate
• Status
• Summary
• Timestamp
• Timezone
• Transparency
• UID
• URL

Each method that acts on the calendar takes a ResourceURI parameter, which points to either an event resource or to the calendar itself. Event resources have a URI that ends with a filename and the ".ics" extension. Calendar resources end in a directory path. The following methods all act on events, and thus their ResourceURI parameters must terminate in a filename with the ".ics" extension:

• CopyCalendarEvent
• DeleteCalendarEvent
• MoveCalendarEvent
• GetCalendarEvent
• PutCalendarEvent

• CreateCalendar
• GetCalendarOptions
• GetCalendarReport
• GetFreeBusyReport

There is no standard format for resource URIs. Google for instance, uses "https://www.google.com/calendar/dav/" plus your email address to access the default calendar. So "https://www.google.com/calendar/dav/username@gmail.com/" is the base URI for the default calendar. If you have multiple calendars, replace the email address portion above with the Id of the calendar, plus "@group.calendar.google.com/". For instance: "https://www.google.com/calendar/dav/ev3nkr4ua83jej7q32oumn5eeo@group.calendar.google.com/". For Google, calendar events are stored in the "/events/" path. To retrieve a report on a calendar, you'd add "/events/" to one of the above paths. For example: CalDAV.GetCalendarReport("https://www.google.com/calendar/dav/username@gmail.com/events/"); Leaving the "/events/" out of the URI will result in an HTTP protocol error: 405 Method not allowed.

To add or retrieve an event, add the UID of the event you're creating or retrieving plus ".ics" to the path. Note that when putting an event with the PutCalendarEvent method, if the resourceURI and the UID do not match Google will create the event using the UID stored in the UID property. The actual location of will be newly added event will be returned in a "Location" header. This is the resource URI you must use to retrieve the event with GetCalendarEvent. For example: CalDAV.UID = "1234567890"; CalDAV.PutCalendarEvent("https://www.google.com/calendar/dav/username@gmail.com/events/1234567890.ics");

Yahoo uses a different format for CalDAV access. Yahoo's ResourceURIs always start with "https://caldav.calendar.yahoo.com/dav/" plus your user name, plus "/Calendar/" plus the name of your calendar. For instance: "https://caldav.calendar.yahoo.com/dav/username/Calendar/Your_Name" for the default calendar. (Yahoo uses your name to create the default calendar). When using the CreateCalendar event to create a new calendar, replace "Your_Name" in the URI with the desired name of your new calendar. Event resources are located directly under the "/Calendar/Calendar_Name/" path. Like Google, the UID and filename portion of the resource URI must match, but Yahoo will actually return an HTTP protocol error if they differ. The examples below show a few possible transactions: CalDAVS1.User = "username"; CalDAVS1.Password = "password"; CalDAV.DisplayName = "My Hockey Calendar"; CalDAV.CreateCalendar("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/"); CalDAV.StartDate = "20100401T040000"; CalDAV.EndDate = "20100401T060000"; CalDAV.UID = "qwerty1234567"; CalDAV.Summary = "First Practice"; CalDAV.Location = "Rink on 1st and main"; CalDAV.EventType = vEvent; CalDAV.PutCalendarEvent("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/qwerty1234567.ics"); CalDAV.GetCalendarReport("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/");

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AlarmCount Property (CalDAV Component)

The number of records in the Alarm arrays.

Syntax

__property int AlarmCount = { read=FAlarmCount, write=FSetAlarmCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• AlarmAction
• AlarmAttachment
• AlarmAttachmentType
• AlarmDuration
• AlarmMessage
• AlarmRecipient
• AlarmRepeat
• AlarmSubject
• AlarmTrigger

The array indices start at 0 and end at AlarmCount - 1.

This property is not available at design time.

Data Type

Integer

AlarmAction Property (CalDAV Component)

This property determines what the CalDAV server will do when the alarm Trigger is reached.

Syntax

__property TipwCalDAVAlarmActions AlarmAction[int AlarmIndex] = { read=FAlarmAction, write=FSetAlarmAction };

enum TipwCalDAVAlarmActions {
  aNoAlarm=0,
  aAudio=1,
  aDisplay=2,
  aEmail=3
};

Default Value

aNoAlarm

Remarks

This property determines what the CalDAV server will do when the alarm AlarmTrigger is reached. The following table explains the possible alarm actions:

The AlarmIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AlarmCount property.

This property is not available at design time.

Data Type

Integer

AlarmAttachment Property (CalDAV Component)

This property contains a sound file attached to the alarm.

Syntax

__property String AlarmAttachment[int AlarmIndex] = { read=FAlarmAttachment, write=FSetAlarmAttachment };

Default Value

""

Remarks

This property contains a sound file attached to the alarm. If the AlarmAction is set to aAudio, this property may optionally contain a base-64 encoded binary sound file to be played. The AlarmAttachmentType property indicates the data type of the attached file.

The AlarmIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AlarmCount property.

This property is not available at design time.

Data Type

String

AlarmAttachmentType Property (CalDAV Component)

This property contains the MIME-Type of the attachment.

Syntax

__property String AlarmAttachmentType[int AlarmIndex] = { read=FAlarmAttachmentType, write=FSetAlarmAttachmentType };

Default Value

""

Remarks

This property contains the MIME-Type of the attachment. If the AlarmAction is set to aAudio or aEmail the AlarmAttachment property may optionally contain a base-64 binary encoded attachment. The AlarmAttachmentType property is used to tell the CalDAV server what type of binary file it is receiving. This property is a standard MIME content type, in the format "type/sub-type". The most common audio types are shown in the table below:

You may use standard MIME content-types for any other file type you wish to submit in the AlarmAttachment property. If AlarmAttachment is specified but AlarmAttachmentType is left blank, no format type will be submitted with the AlarmAttachment and the CalDAV server may (or may not) attempt to determine the data type itself.

The AlarmIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AlarmCount property.

This property is not available at design time.

Data Type

String

AlarmDuration Property (CalDAV Component)

This property contains the interval between repeating alarms.

Syntax

__property String AlarmDuration[int AlarmIndex] = { read=FAlarmDuration, write=FSetAlarmDuration };

Default Value

""

Remarks

This property contains the interval between repeating alarms. This property is only used when an alarm is set to AlarmRepeat multiple times. It is specified in the form of a Duration data type. Durations are represented by the format P<date>T<time>. The date component may contain a number of days or weeks (but not months or years), and the time component may consist of hours, minutes, and seconds. These are represented by an integer value followed by a letter representing the units, as specified by the table below:

This format is based on ISO-8601, but unlike the ISO specification this duration property does not support durations measured in years or months.

The following is an example of an alarm that repeats 4 additional times after the initial AlarmTrigger, with a 5-minute delay between each alarm: CalDav.Trigger = "-PT10M"; CalDAV.Alarm.Repeat = 4; CalDAV.Duration = "PT5M" CalDAV.Action = aDisplay;

If AlarmDuration is specified, AlarmRepeat MUST also be specified.

The AlarmIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AlarmCount property.

This property is not available at design time.

Data Type

String

AlarmMessage Property (CalDAV Component)

This property contains a message used to alert the user when this alarm is triggered.

Syntax

__property String AlarmMessage[int AlarmIndex] = { read=FAlarmMessage, write=FSetAlarmMessage };

Default Value

""

Remarks

This property contains a message used to alert the user when this alarm is triggered. If the AlarmAction is set to aDisplay, this property must contain the message that is to be displayed to the user. If AlarmAction is set to aEmail this property will contain the message body of the email that is sent to the AlarmRecipient. For instance: CalDAV.Alarm.Action = aEmail; CalDAV.Alarm.Recipient = "mailto:john_doe@example.com"; CalDAV.Alarm.Message = "A draft agenda needs to be sent out to the attendees to the weekly managers meeting (MGR-LIST)."; CalDAV.Alarm.Subject = "REMINDER: Send agenda for weekly staff meeting."; or CalDAV.Alarm.Action = aDisplay; CalDAV.Alarm.Message = "REMINDER: Send agenda for weekly staff meeting."; AlarmMessage is not used for the aAudio alarm AlarmAction.

The AlarmIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AlarmCount property.

This property is not available at design time.

Data Type

String

AlarmRecipient Property (CalDAV Component)

This property contains the email address of the person to be alerted when this alarm is triggered.

Syntax

__property String AlarmRecipient[int AlarmIndex] = { read=FAlarmRecipient, write=FSetAlarmRecipient };

Default Value

""

Remarks

This property contains the email address of the person to be alerted when this alarm is triggered. If AlarmAction is set to aEmail this property must contain one or more comma-separated email addresses to which the email alarm is to be sent. For instance: CalDAV.Alarm.Action = aEmail; CalDAV.Alarm.Recipient = "mailto:john_doe@example.com"; CalDAV.Alarm.Message = "A draft agenda needs to be sent out to the attendees to the weekly managers meeting (MGR-LIST)."; CalDAV.Alarm.Subject = "REMINDER: Send agenda for weekly staff meeting."; AlarmRecipient is not used for the aAudio or aDisplay alarm AlarmActions.

The AlarmIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AlarmCount property.

This property is not available at design time.

Data Type

String

AlarmRepeat Property (CalDAV Component)

This property contains the number of times the alarm is to be repeated after the initial trigger.

Syntax

__property int AlarmRepeat[int AlarmIndex] = { read=FAlarmRepeat, write=FSetAlarmRepeat };

Default Value

0

Remarks

This property contains the number of times the alarm is to be repeated after the initial trigger.

This property defines the number of times an alarm should be repeated after its initial AlarmTrigger. If the alarm triggers more than once, then this property MUST be specified along with the AlarmDuration property.

The AlarmIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AlarmCount property.

This property is not available at design time.

Data Type

Integer

AlarmSubject Property (CalDAV Component)

This property contains the subject of the message used to alert the user when this alarm is triggered.

Syntax

__property String AlarmSubject[int AlarmIndex] = { read=FAlarmSubject, write=FSetAlarmSubject };

Default Value

""

Remarks

This property contains the subject of the message used to alert the user when this alarm is triggered. If AlarmAction is set to aEmail this property will contain the subject the email that is sent to the AlarmRecipient. For instance: CalDAV.Alarm.Action = aEmail; CalDAV.Alarm.Recipient = "mailto:john_doe@example.com"; CalDAV.Alarm.Message = "A draft agenda needs to be sent out to the attendees to the weekly managers meeting (MGR-LIST)."; CalDAV.Alarm.Subject = "REMINDER: Send agenda for weekly staff meeting."; AlarmSubject is not used for the aAudio or aDisplay alarm AlarmActions.

The AlarmIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AlarmCount property.

This property is not available at design time.

Data Type

String

AlarmTrigger Property (CalDAV Component)

This property contains the time when the alarm is triggered.

Syntax

__property String AlarmTrigger[int AlarmIndex] = { read=FAlarmTrigger, write=FSetAlarmTrigger };

Default Value

""

Remarks

This property contains the time when the alarm is triggered.

The AlarmTrigger is represented as a duration relative to the start of an event. The format is (+/-)P<date>T<time>. The date component may contain a number of days or weeks (but not months or years), and the time component may consist of hours, minutes, and seconds. These are represented by an integer value followed by a letter representing the units, as specified by the table below:

The AlarmIndex parameter specifies the index of the item in the array. The size of the array is controlled by the AlarmCount property.

This property is not available at design time.

Data Type

String

Attendees Property (CalDAV Component)

Defines one or more participants that have been invited to the event.

Syntax

__property String Attendees = { read=FAttendees, write=FSetAttendees };

Default Value

""

Remarks

This property may contain a comma-separated list of attendees that have been invited to an event. Each email address should be in the mailto URI format (as defined in RFC2368). For instance: CalDAV.Attendees = "mailto:johnsmith@example.com,mailto:janedoe@test.com"

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

Authorization Property (CalDAV Component)

This property includes the Authorization string to be sent to the server.

Syntax

__property String Authorization = { read=FAuthorization, write=FSetAuthorization };

Default Value

""

Remarks

If the Authorization property contains a nonempty string, an Authorization HTTP request header is added to the request. This header conveys Authorization information to the server.

A common use for this property is to specify OAuth authorization string.

This property is provided so that the HTTP component can be extended with other security schemes in addition to the authorization schemes already implemented by the component.

The AuthScheme property defines the authentication scheme used. In the case of HTTP Basic Authentication (default), every time User and Password are set, they are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

Data Type

String

AuthScheme Property (CalDAV Component)

The authentication scheme to use when server authentication is required.

Syntax

__property TipwCalDAVAuthSchemes AuthScheme = { read=FAuthScheme, write=FSetAuthScheme };

enum TipwCalDAVAuthSchemes {
  authBasic=0,
  authDigest=1,
  authProprietary=2,
  authNone=3,
  authNtlm=4,
  authNegotiate=5,
  authOAuth=6
};

Default Value

authBasic

Remarks

This property will tell the component which type of authorization to perform when the User and Password properties are set.

This property should be set to authNone (3) when no authentication is to be performed.

By default, this property is authBasic (0), and if the User and Password properties are set, the component will attempt HTTP Basic Authentication. If AuthScheme is set to authDigest (1), authNtlm (4), or authNegotiate (5), then Digest, NTLM, or Windows Negotiate (Kerberos) authentication will be attempted instead.

If AuthScheme is set to authProprietary (2), then the authorization token must be supplied through the Authorization property.

If AuthScheme is set to authOAuth (6), then the authorization string must be supplied through the Authorization property.

Note: If you set the Authorization property and AuthScheme is not authProprietary or authOAuth, then the AuthScheme will be set automatically to authProprietary (2) by the component.

For security, changing the value of this property will cause the component to clear the values of User, Password, and Authorization.

Data Type

Integer

Categories Property (CalDAV Component)

Used to specify categories or subtypes of the calendar event.

Syntax

__property String Categories = { read=FCategories, write=FSetCategories };

Default Value

""

Remarks

This property is used to specify the categories or subtypes contained in a calendar event. The categories are useful in searching for an event of a particular type and/or category. Within the "VEVENT", "VTODO", or "VJOURNAL" calendar components, more than one category can be specified as a COMMA-separated list of categories. For example: CalDAV.CalendarEvents[0].Category = "APPOINTMENT,EDUCATION,MEETING";

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

Classification Property (CalDAV Component)

Defines the access classification for a calendar component.

Syntax

__property String Classification = { read=FClassification, write=FSetClassification };

Default Value

""

Remarks

This property provides a method for capturing the access that the owner wishes to allow for the calendar component. Standard values include "PUBLIC", "PRIVATE", and "CONFIDENTIAL", but calendars may support additional values as well as user-defined values. If not specified, the default value is PUBLIC. Applications MUST treat Classification values that they do not recognize the same way as they would the PRIVATE value.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

Completed Property (CalDAV Component)

Date and time that a to-do was actually completed.

Syntax

__property String Completed = { read=FCompleted, write=FSetCompleted };

Default Value

""

Remarks

This property defines the date and time that a to-do was actually completed. This property is only applicable for the vTodo EventType. The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

Connected Property (CalDAV Component)

This shows whether the component is connected.

Syntax

__property bool Connected = { read=FConnected, write=FSetConnected };

Default Value

False

Remarks

This property is used to determine whether or not the component is connected to the remote host.

Note: It is recommended to use the Connect or Disconnect method instead of setting this property.

This property is not available at design time.

Data Type

Boolean

CookieCount Property (CalDAV Component)

The number of records in the Cookie arrays.

Syntax

__property int CookieCount = { read=FCookieCount, write=FSetCookieCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• CookieDomain
• CookieExpiration
• CookieName
• CookiePath
• CookieSecure
• CookieValue

The array indices start at 0 and end at CookieCount - 1.

This property is not available at design time.

Data Type

Integer

CookieDomain Property (CalDAV Component)

This is the domain of a received cookie.

Syntax

__property String CookieDomain[int CookieIndex] = { read=FCookieDomain };

Default Value

""

Remarks

This is the domain of a received cookie. This property contains a domain name to limit the cookie to (if provided by the server). If the server does not provide a domain name, this property will contain an empty string. The convention in this case is to use the server name specified by URLServer as the cookie domain.

The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.

This property is read-only and not available at design time.

Data Type

String

CookieExpiration Property (CalDAV Component)

This property contains an expiration time for the cookie (if provided by the server).

Syntax

__property String CookieExpiration[int CookieIndex] = { read=FCookieExpiration };

Default Value

""

Remarks

This property contains an expiration time for the cookie (if provided by the server). The time format used is "Weekday, DD-Mon-YY HH:MM:SS GMT". If the server does not provide an expiration time, this property will contain an empty string. The convention is to drop the cookie at the end of the session.

The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.

This property is read-only and not available at design time.

Data Type

String

CookieName Property (CalDAV Component)

This property, contains the name of the cookie.

Syntax

__property String CookieName[int CookieIndex] = { read=FCookieName, write=FSetCookieName };

Default Value

""

Remarks

This property, contains the name of the cookie.

This property, along with CookieValue, stores the cookie that is to be sent to the server. The SetCookie event displays the cookies sent by the server and their properties.

The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.

This property is not available at design time.

Data Type

String

CookiePath Property (CalDAV Component)

This property contains a path name to limit the cookie to (if provided by the server).

Syntax

__property String CookiePath[int CookieIndex] = { read=FCookiePath };

Default Value

""

Remarks

This property contains a path name to limit the cookie to (if provided by the server). If the server does not provide a cookie path, the path property will be an empty string. The convention in this case is to use the path specified by URLPath as the cookie path.

The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.

This property is read-only and not available at design time.

Data Type

String

CookieSecure Property (CalDAV Component)

This property contains the security flag of the received cookie.

Syntax

__property bool CookieSecure[int CookieIndex] = { read=FCookieSecure };

Default Value

false

Remarks

This property contains the security flag of the received cookie. This property specifies whether the cookie is secure. If the value of this property is True, the cookie value must be submitted only through a secure (HTTPS) connection.

The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CookieValue Property (CalDAV Component)

This property contains the value of the cookie.

Syntax

__property String CookieValue[int CookieIndex] = { read=FCookieValue, write=FSetCookieValue };

Default Value

""

Remarks

This property contains the value of the cookie. A corresponding value is associated with the cookie specified by CookieName. This property holds that value.

The SetCookie event provides the cookies set by the server.

The CookieIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CookieCount property.

This property is not available at design time.

Data Type

String

Created Property (CalDAV Component)

Date and time calendar information created.

Syntax

__property String Created = { read=FCreated, write=FSetCreated };

Default Value

""

Remarks

This property specifies the date and time that the calendar information was created by the calendar user agent in the calendar store. The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

CustomPropertyCount Property (CalDAV Component)

The number of records in the CustomProperty arrays.

Syntax

__property int CustomPropertyCount = { read=FCustomPropertyCount, write=FSetCustomPropertyCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• CustomPropertyAttribute
• CustomPropertyName
• CustomPropertyValue

The array indices start at 0 and end at CustomPropertyCount - 1.

This property is not available at design time.

Data Type

Integer

CustomPropertyAttribute Property (CalDAV Component)

This property contains an optional attribute of the custom property.

Syntax

__property String CustomPropertyAttribute[int CustomPropertyIndex] = { read=FCustomPropertyAttribute, write=FSetCustomPropertyAttribute };

Default Value

""

Remarks

This property contains an optional attribute of the custom property.

The CustomPropertyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CustomPropertyCount property.

This property is not available at design time.

Data Type

String

CustomPropertyName Property (CalDAV Component)

This property contains the textual name of the custom property.

Syntax

__property String CustomPropertyName[int CustomPropertyIndex] = { read=FCustomPropertyName, write=FSetCustomPropertyName };

Default Value

""

Remarks

This property contains the textual name of the custom property.

The CustomPropertyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CustomPropertyCount property.

This property is not available at design time.

Data Type

String

CustomPropertyValue Property (CalDAV Component)

This property contains the value of the custom property.

Syntax

__property String CustomPropertyValue[int CustomPropertyIndex] = { read=FCustomPropertyValue, write=FSetCustomPropertyValue };

Default Value

""

Remarks

This property contains the value of the custom property.

The CustomPropertyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CustomPropertyCount property.

This property is not available at design time.

Data Type

String

Depth Property (CalDAV Component)

The depth associated with the current operation.

Syntax

__property TipwCalDAVDepths Depth = { read=FDepth, write=FSetDepth };

enum TipwCalDAVDepths {
  dpUnspecified=0,
  dpResourceOnly=1,
  dpImmediateChildren=2,
  dpInfinity=3
};

Default Value

dpUnspecified

Remarks

This property defines how deep to operate within a collection. When performing certain operations on resource collections, the component will use Depth to instruct the server on how deep to operate within the collection. Depth is an enumerated type with the following possible values:

Depth is used when performing the following operations: LockCalendar, MoveCalendarEvent, CopyCalendarEvent, and GetCalendarReport

Data Type

Integer

Description Property (CalDAV Component)

Provides a complete description of the calendar event.

Syntax

__property String Description = { read=FDescription, write=FSetDescription };

Default Value

""

Remarks

This property provides a more complete description of the event than is provided by the Summary property. It is also used by the CreateCalendar method when creating a new calendar collection.

Data Type

String

DisplayName Property (CalDAV Component)

Provides the display name of the calendar being created.

Syntax

__property String DisplayName = { read=FDisplayName, write=FSetDisplayName };

Default Value

""

Remarks

This property provides the name to be displayed for a calendar. This may or may not be defined on any calendar collection. It should be set before creating a new calendar collection via the CreateCalendar method.

Data Type

String

DueDate Property (CalDAV Component)

Specifies the due date for a calendar event.

Syntax

__property String DueDate = { read=FDueDate, write=FSetDueDate };

Default Value

""

Remarks

This setting can be used to configure or obtain the due date for the selected calendar event.

Note: The format of this property should be the same as EndDate.

Data Type

String

Duration Property (CalDAV Component)

Duration of the calendar event.

Syntax

__property String Duration = { read=FDuration, write=FSetDuration };

Default Value

""

Remarks

This property contains the duration for a calendar event. Durations are represented by the format P<date>T<time>. The date component may contain a number of days or weeks (but not months or years), and the time component may consist of hours, minutes, and seconds. These are represented by an integer value followed by a letter representing the units, as specified by the table below:

This format is based on ISO-8601, but unlike the ISO specification this duration property does not support durations measured in years or months.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

EndDate Property (CalDAV Component)

Specifies the date and time that a calendar event ends.

Syntax

__property String EndDate = { read=FEndDate, write=FSetEndDate };

Default Value

""

Remarks

This property specifies the date and time that a calendar event will end. The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

ETag Property (CalDAV Component)

Identifier returned by the CalDAV server which is used to synchronize edits.

Syntax

__property String ETag = { read=FETag, write=FSetETag };

Default Value

""

Remarks

This property identifies the state of the event in the calendar. An ETag is returned by the CalDAV server after a successful PutCalendarEvent request. Every time an event is updated, the ETag changes. This gives you the ability to determine if another user has changed the event you added.

You can use this ETag value to maintain a cache. If you submit a GetCalendarReport request with the ReportFilterReturnCalendarData property set to False only the URI and ETags for each event in the calendar will be returned in the report. You can cache the ETag and URI locally, and then inspect the report for any changes and update only the events that have changed ETags.

When updating an event with the PutCalendarEvent method, you may add the ETag to the "If-Match" header (using OtherHeaders) in order to insure that you are not overwriting more recent changes on the server. For instance: calDAV.UID = "20110202T000000Z-6414-500-10112-204@nsoftest"; calDAV.StartDate = "20110202T000000Z"; calDAV.EndDate = "20110202T110000Z"; calDAV.TimeStamp = "20100301T000000Z"; calDAV.Summary = "Dinner with friends"; calDAV.Description = "Getting everyone together for some food and fun"; calDAV.Location = "The James Joyce Irish Pub"; calDAV.EventType = CaldavsEventTypes.vEvent; calDAV.OtherHeaders = "If-Match: 1900-1900\r\ n"; calDAV.PutCalendarEvent "https://caldav.calendar.yahoo.com/dav/user_name/Calendar/My_Calendar/20110202T000000Z-6414-500-10112-204@nsoftest.ics" If the current ETag for the above event is "1900-1900", then the above modification will work perfectly. However, if the event was modified on the Yahoo server, the ETag will not match and the above will fail with an HTTP Protocol error: "409 Conflict". In that case you should retrieve the event with GetCalendarEvent and update the most recent version.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

EventType Property (CalDAV Component)

Indicates the type of calendar object resource.

Syntax

__property TipwCalDAVEventTypes EventType = { read=FEventType, write=FSetEventType };

enum TipwCalDAVEventTypes {
  vEvent=0,
  vTodo=1,
  vJournal=2,
  vFreeBusy=3
};

Default Value

vEvent

Remarks

This property indicates the type of calendar object resource is used.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

Integer

FirewallAutoDetect Property (CalDAV Component)

This property tells the component whether or not to automatically detect and use firewall system settings, if available.

Syntax

__property bool FirewallAutoDetect = { read=FFirewallAutoDetect, write=FSetFirewallAutoDetect };

Default Value

False

Remarks

This property tells the component whether or not to automatically detect and use firewall system settings, if available.

Data Type

Boolean

FirewallType Property (CalDAV Component)

This property determines the type of firewall to connect through.

Syntax

__property TipwCalDAVFirewallTypes FirewallType = { read=FFirewallType, write=FSetFirewallType };

enum TipwCalDAVFirewallTypes {
  fwNone=0,
  fwTunnel=1,
  fwSOCKS4=2,
  fwSOCKS5=3,
  fwSOCKS4A=10
};

Default Value

fwNone

Remarks

This property determines the type of firewall to connect through. The applicable values are as follows:

Data Type

Integer

FirewallHost Property (CalDAV Component)

This property contains the name or IP address of firewall (optional).

Syntax

__property String FirewallHost = { read=FFirewallHost, write=FSetFirewallHost };

Default Value

""

Remarks

This property contains the name or IP address of firewall (optional). If a FirewallHost is given, the requested connections will be authenticated through the specified firewall when connecting.

If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the component raises an exception.

Data Type

String

FirewallPassword Property (CalDAV Component)

This property contains a password if authentication is to be used when connecting through the firewall.

Syntax

__property String FirewallPassword = { read=FFirewallPassword, write=FSetFirewallPassword };

Default Value

""

Remarks

This property contains a password if authentication is to be used when connecting through the firewall. If FirewallHost is specified, the FirewallUser and FirewallPassword properties are used to connect and authenticate to the given firewall. If the authentication fails, the component raises an exception.

Data Type

String

FirewallPort Property (CalDAV Component)

This property contains the transmission control protocol (TCP) port for the firewall Host .

Syntax

__property int FirewallPort = { read=FFirewallPort, write=FSetFirewallPort };

Default Value

0

Remarks

This property contains the transmission control protocol (TCP) port for the firewall FirewallHost. See the description of the FirewallHost property for details.

Note: This property is set automatically when FirewallType is set to a valid value. See the description of the FirewallType property for details.

Data Type

Integer

FirewallUser Property (CalDAV Component)

This property contains a user name if authentication is to be used connecting through a firewall.

Syntax

__property String FirewallUser = { read=FFirewallUser, write=FSetFirewallUser };

Default Value

""

Remarks

This property contains a user name if authentication is to be used connecting through a firewall. If the FirewallHost is specified, this property and FirewallPassword properties are used to connect and authenticate to the given Firewall. If the authentication fails, the component raises an exception.

Data Type

String

FollowRedirects Property (CalDAV Component)

This property determines what happens when the server issues a redirect.

Syntax

__property TipwCalDAVFollowRedirects FollowRedirects = { read=FFollowRedirects, write=FSetFollowRedirects };

enum TipwCalDAVFollowRedirects {
  frNever=0,
  frAlways=1,
  frSameScheme=2
};

Default Value

frNever

Remarks

This property determines what happens when the server issues a redirect. Normally, the component returns an error if the server responds with an "Object Moved" message. If this property is set to frAlways (1), the new URL for the object is retrieved automatically every time.

If this property is set to frSameScheme (2), the new URL is retrieved automatically only if the URLScheme is the same; otherwise, the component raises an exception.

Note: Following the HTTP specification, unless this property is set to frAlways (1), automatic redirects will be performed only for GET or HEAD requests. Other methods potentially could change the conditions of the initial request and create security vulnerabilities.

Furthermore, if either the new URL server or port are different from the existing one, User and Password are also reset to empty. If, however, this property is set to frAlways (1), the same credentials are used to connect to the new server.

A Redirect event is fired for every URL the product is redirected to. In the case of automatic redirections, the Redirect event is a good place to set properties related to the new connection (e.g., new authentication parameters).

The default value is frNever (0). In this case, redirects are never followed, and the component raises an exception instead.

Data Type

Integer

FreeBusyCount Property (CalDAV Component)

The number of records in the FreeBusy arrays.

Syntax

__property int FreeBusyCount = { read=FFreeBusyCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• FreeBusyRange
• FreeBusyType

The array indices start at 0 and end at FreeBusyCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

FreeBusyRange Property (CalDAV Component)

Contains the date/time range when the calendar owner is busy.

Syntax

__property String FreeBusyRange[int FreeBusyIndex] = { read=FFreeBusyRange };

Default Value

""

Remarks

Contains the date/time range when the calendar owner is busy. The format for this property is either "DATETIME/DATETIME" or "DATETIME/DURATION"

The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

Durations are represented by the format P<date>T<time>. The date component may contain a number of days or weeks (but not months or years), and the time component may consist of hours, minutes, and seconds. These are represented by an integer value followed by a letter representing the units, as specified by the table below:

This format is based on ISO-8601, but unlike the ISO specification this duration property does not support durations measured in years or months.

The FreeBusyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FreeBusyCount property.

This property is read-only and not available at design time.

Data Type

String

FreeBusyType Property (CalDAV Component)

Indicates the busy status of the corresponding BusyRange .

Syntax

__property String FreeBusyType[int FreeBusyIndex] = { read=FFreeBusyType };

Default Value

""

Remarks

Indicates the busy status of the corresponding FreeBusyBusyRange. A calendar may use custom values for the FreeBusyBusyType, but the standard values include:

• BUSY
• FREE
• BUSY-TENTATIVE
• BUSY-UNAVAILABLE

The FreeBusyIndex parameter specifies the index of the item in the array. The size of the array is controlled by the FreeBusyCount property.

This property is read-only and not available at design time.

Data Type

String

Idle Property (CalDAV Component)

The current status of the component.

Syntax

__property bool Idle = { read=FIdle };

Default Value

True

Remarks

Idle will be False if the component is currently busy (communicating and/or waiting for an answer), and True at all other times.

This property is read-only.

Data Type

Boolean

LastModified Property (CalDAV Component)

The date and time that the information associated with the calendar event was last revised in the calendar store.

Syntax

__property String LastModified = { read=FLastModified, write=FSetLastModified };

Default Value

""

Remarks

This property contains the date and time that the information associated with the calendar event was last revised in the calendar store. This is analogous to the modification date and time for a file in the file system, and must be specified in the UTC time format: <date>T<time>Z, where date is in "YYYYMMDD" format and time is in "hhmmss" format. "T" is the delimiter between date and time, and "Z" is the UTC timezone indicator. For example, "20020119T13:23:56Z" is 1:23:56pm on January 19th, 2002. The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

LocalHost Property (CalDAV Component)

The name of the local host or user-assigned IP interface through which connections are initiated or accepted.

Syntax

__property String LocalHost = { read=FLocalHost, write=FSetLocalHost };

Default Value

""

Remarks

The LocalHost property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.

In multi-homed hosts (machines with more than one IP interface) setting LocalHost to the value of an interface will make the component initiate connections (or accept in the case of server components) only through that interface.

If the component is connected, the LocalHost property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multi-homed hosts (machines with more than one IP interface).

NOTE: LocalHost is not persistent. You must always set it in code, and never in the property window.

Data Type

String

Location Property (CalDAV Component)

Defines the intended venue for the activity defined by a calendar component.

Syntax

__property String Location = { read=FLocation, write=FSetLocation };

Default Value

""

Remarks

This property may be used to explicitly specify the venue, such as conference or meeting rooms, for the activity defined by a calendar component. An alternate representation may be specified using a URI that points to directory information with more structured specifications of the location. For example, the alternate representation may specify either an LDAP URL [RFC4516] pointing to an LDAP server entry or a CID URL [RFC2392] pointing to a MIME body part containing a Virtual-Information Card (vCard) [RFC2426] for the location.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

LockType Property (CalDAV Component)

The type of the current resource lock.

Syntax

__property String LockType = { read=FLockType, write=FSetLockType };

Default Value

"write"

Remarks

The type of the current resource lock.

Before the calendar resource can be locked, the LockType may be set to the type of lock being requested. Currently, the component only supports requesting locks of type "write", although the protocol defines an optional "read" lock. After a successful LockCalendar operation, the component will set the LockType property to the correct value returned in the server's response.

Data Type

String

LockOwner Property (CalDAV Component)

The principle that owns the current resource lock.

Syntax

__property String LockOwner = { read=FLockOwner, write=FSetLockOwner };

Default Value

""

Remarks

The principle that owns the current resource lock.

Before the calendar resource can be locked, the Lock LockOwner may be set to the name of a principle or group of principles that will own the lock. If no owner is specified, the server will automatically associate the lock with the requesting principle. After a successful LockCalendar operation, the component will set the LockOwner property to the correct value returned in the server's response.

Data Type

String

LockScope Property (CalDAV Component)

The scope of the current resource lock.

Syntax

__property String LockScope = { read=FLockScope, write=FSetLockScope };

Default Value

""

Remarks

The scope of the current resource lock.

Before the calendar resource can be locked, the Lock LockScope may be set to the type of scope needed for the lock. Currently the component will only allow two types of scopes to be requested:

If no scope is specified, the protocol default scope, "exclusive", will be requested. After a successful LockCalendar operation, the component will set the LockScope property to the correct value returned in the server's response.

Data Type

String

LockTimeout Property (CalDAV Component)

The time to live for the current resource lock.

Syntax

__property int LockTimeout = { read=FLockTimeout, write=FSetLockTimeout };

Default Value

0

Remarks

The time to live for the current resource lock.

Before the calendar resource can be locked, the Lock LockTimeout may be set to a specific amount of time needed for the locked operation to take place. The timeout is used to determine how long the lock may exist before the server automatically unlocks the resource URI. If LockTimeout of 0 is specified, the server will use a default timeout. After a successful LockCalendar operation, the component will set the Lock LockTimeout property to the correct value returned in the server's response.

Data Type

Integer

LockTokens Property (CalDAV Component)

The lock string to be used when submitting operations on a locked resource.

Syntax

__property String LockTokens = { read=FLockTokens, write=FSetLockTokens };

Default Value

""

Remarks

The lock string to be used when submitting operations on a locked resource.

Before the calendar resource can be locked, the Lock LockTokens may be set to the tokens returned by a previous lock operation. This is useful when renewing a timeout. The server will respond with a new timeout value, which will be stored in LockTimeout. If the lock request is not a lock refresh, LockTokens must be empty, and will be parsed out of the server response after a successful LockCalendar operation.

Data Type

String

Organizer Property (CalDAV Component)

Defines the organizer of a calendar event.

Syntax

__property String Organizer = { read=FOrganizer, write=FSetOrganizer };

Default Value

""

Remarks

This property is specified within the vEvent, vTodo, and vJournal calendar EventTypes to specify the organizer of a group-scheduled calendar entity. The property is specified within the vFreeBusy EventType to identify the calendar user requesting the free or busy time. When publishing a vFreeBusy EventType, the property is used to specify the calendar that the published busy time came from.

Each email address should be in the mailto URI format (as defined in RFC2368).

For instance: CalDAV.Organizer = "mailto:jane_doe@example.com";

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

OtherHeaders Property (CalDAV Component)

This property includes other headers as determined by the user (optional).

Syntax

__property String OtherHeaders = { read=FOtherHeaders, write=FSetOtherHeaders };

Default Value

""

Remarks

This property can be set to a string of headers to be appended to the HTTP request headers created from other properties like ContentType and From.

The headers must follow the format Header: Value as described in the HTTP specifications. Header lines should be separated by CRLF ("\r\n") .

Use this property with caution. If this property contains invalid headers, HTTP requests may fail.

This property is useful for extending the functionality of the component beyond what is provided.

For CalDAV, the "If-Match" header is extremely useful. After adding a an event with PutCalendarEvent or retrieving an event with GetCalendarEvent, the ETag property will contain a value indicating the current state of the event. If you wish to update the event, you may pass this returned ETag in an "If-Match" header. If the event on the server has been modified since you retrieved it (and the ETag on the server has changed), then the PutCalendarEvent will fail with an HTTP Protocol Error: "409 Conflict", which indicates there is a conflict between the version you're trying to update and the current version on the sever. For instance: calDAV.OtherHeaders = "If-Match: 1900-1900\r\ n";

This property is not available at design time.

Data Type

String

ParsedHeaderCount Property (CalDAV Component)

The number of records in the ParsedHeader arrays.

Syntax

__property int ParsedHeaderCount = { read=FParsedHeaderCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• ParsedHeaderField
• ParsedHeaderValue

The array indices start at 0 and end at ParsedHeaderCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ParsedHeaderField Property (CalDAV Component)

This property contains the name of the HTTP header (this is the same case as it is delivered).

Syntax

__property String ParsedHeaderField[int ParsedHeaderIndex] = { read=FParsedHeaderField };

Default Value

""

Remarks

This property contains the name of the HTTP Header (this is the same case as it is delivered).

The ParsedHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ParsedHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

ParsedHeaderValue Property (CalDAV Component)

This property contains the header contents.

Syntax

__property String ParsedHeaderValue[int ParsedHeaderIndex] = { read=FParsedHeaderValue };

Default Value

""

Remarks

This property contains the Header contents.

The ParsedHeaderIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ParsedHeaderCount property.

This property is read-only and not available at design time.

Data Type

String

Password Property (CalDAV Component)

This property includes a password if authentication is to be used.

Syntax

__property String Password = { read=FPassword, write=FSetPassword };

Default Value

""

Remarks

This property contains a password if authentication is to be used. If AuthScheme is set to HTTP Basic Authentication, the User and Password are Base64 encoded and the result is put in the Authorization configuration setting in the form "Basic [encoded-user-password]".

If AuthScheme is set to HTTP Digest Authentication, the User and Password properties are used to respond to the HTTP Digest Authentication challenge from the server.

If AuthScheme is set to NTLM, NTLM authentication will be attempted. If AuthScheme is set to NTLM and User and Password are empty, the component will attempt to authenticate using the current user's credentials.

Data Type

String

Priority Property (CalDAV Component)

Defines the relative priority for a calendar event.

Syntax

__property int Priority = { read=FPriority, write=FSetPriority };

Default Value

0

Remarks

This property defines the relative priority of a calendar event. The priority is specified as an integer in the range 0 to 9. A value of 0 specifies an undefined Priority. A value of 1 is the highest Priority. A value of 2 is the second highest Priority. Subsequent numbers specify a decreasing ordinal Priority. A value of 9 is the lowest Priority.

A Calendar User-Agent (CUA) with a three-level Priority scheme of "HIGH", "MEDIUM", and "LOW" is mapped into this property such that a property value in the range of 1 to 4 specifies "HIGH" Priority. A value of 5 is the normal or "MEDIUM" Priority. A value in the range of 6 to 9 is "LOW" Priority.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

Integer

ProxyAuthScheme Property (CalDAV Component)

This property is used to tell the component which type of authorization to perform when connecting to the proxy.

Syntax

__property TipwCalDAVProxyAuthSchemes ProxyAuthScheme = { read=FProxyAuthScheme, write=FSetProxyAuthScheme };

enum TipwCalDAVProxyAuthSchemes {
  authBasic=0,
  authDigest=1,
  authProprietary=2,
  authNone=3,
  authNtlm=4,
  authNegotiate=5
};

Default Value

authBasic

Remarks

This property is used to tell the component which type of authorization to perform when connecting to the proxy. This is used only when the ProxyUser and ProxyPassword properties are set.

ProxyAuthScheme should be set to authNone (3) when no authentication is expected.

By default, ProxyAuthScheme is authBasic (0), and if the ProxyUser and ProxyPassword properties are set, the component will attempt basic authentication.

If ProxyAuthScheme is set to authDigest (1), digest authentication will be attempted instead.

If ProxyAuthScheme is set to authProprietary (2), then the authorization token will not be generated by the component. Look at the configuration file for the component being used to find more information about manually setting this token.

If ProxyAuthScheme is set to authNtlm (4), NTLM authentication will be used.

For security reasons, setting this property will clear the values of ProxyUser and ProxyPassword.

Data Type

Integer

ProxyAutoDetect Property (CalDAV Component)

This property tells the component whether or not to automatically detect and use proxy system settings, if available.

Syntax

__property bool ProxyAutoDetect = { read=FProxyAutoDetect, write=FSetProxyAutoDetect };

Default Value

False

Remarks

This property tells the component whether or not to automatically detect and use proxy system settings, if available. The default value is false.

Data Type

Boolean

ProxyPassword Property (CalDAV Component)

This property contains a password if authentication is to be used for the proxy.

Syntax

__property String ProxyPassword = { read=FProxyPassword, write=FSetProxyPassword };

Default Value

""

Remarks

This property contains a password if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

ProxyPort Property (CalDAV Component)

This property contains the Transmission Control Protocol (TCP) port for the proxy Server (default 80).

Syntax

__property int ProxyPort = { read=FProxyPort, write=FSetProxyPort };

Default Value

80

Remarks

This property contains the Transmission Control Protocol (TCP) port for the proxy ProxyServer (default 80). See the description of the ProxyServer property for details.

Data Type

Integer

ProxyServer Property (CalDAV Component)

If a proxy Server is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

Syntax

__property String ProxyServer = { read=FProxyServer, write=FSetProxyServer };

Default Value

""

Remarks

If a proxy ProxyServer is given, then the HTTP request is sent to the proxy instead of the server otherwise specified.

If the ProxyServer property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, the ProxyServer property is set to the corresponding address. If the search is not successful, an error is returned.

Data Type

String

ProxySSL Property (CalDAV Component)

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy.

Syntax

__property TipwCalDAVProxySSLs ProxySSL = { read=FProxySSL, write=FSetProxySSL };

enum TipwCalDAVProxySSLs {
  psAutomatic=0,
  psAlways=1,
  psNever=2,
  psTunnel=3
};

Default Value

psAutomatic

Remarks

This property determines when to use a Secure Sockets Layer (SSL) for the connection to the proxy. The applicable values are as follows:

Data Type

Integer

ProxyUser Property (CalDAV Component)

This property contains a user name, if authentication is to be used for the proxy.

Syntax

__property String ProxyUser = { read=FProxyUser, write=FSetProxyUser };

Default Value

""

Remarks

This property contains a user name, if authentication is to be used for the proxy.

If ProxyAuthScheme is set to Basic Authentication, the ProxyUser and ProxyPassword are Base64 encoded and the proxy authentication token will be generated in the form Basic [encoded-user-password].

If ProxyAuthScheme is set to Digest Authentication, the ProxyUser and ProxyPassword properties are used to respond to the Digest Authentication challenge from the server.

If ProxyAuthScheme is set to NTLM Authentication, the ProxyUser and ProxyPassword properties are used to authenticate through NTLM negotiation.

Data Type

String

RecurrenceDates Property (CalDAV Component)

Individual dates on which the event will recur.

Syntax

__property String RecurrenceDates = { read=FRecurrenceDates, write=FSetRecurrenceDates };

Default Value

""

Remarks

Individual dates on which the event will recur.

This property is used if you wish to denote specific, individual dates on which the event recurs. If you have an event that occurs monthly or weekly or on some other time interval, use the RecurrenceRule property instead.

This property is filled after retrieving a calendar event, and is also used to create an event to put on the server. However, when requesting a report the contents of this property will only be valid inside the CalDAV EventDetails event.

Data Type

String

RecurrenceExceptionDates Property (CalDAV Component)

Defines the list of DATE-TIME exceptions to the recurrence set.

Syntax

__property String RecurrenceExceptionDates = { read=FRecurrenceExceptionDates, write=FSetRecurrenceExceptionDates };

Default Value

""

Remarks

Defines the list of DATE-TIME exceptions to the recurrence set.

If the RecurrenceExceptionDates and RecurrenceExceptionRule are specified, they are used in computing the recurrence set. The recurrence set is the complete set of recurrence instances for a calendar component. The recurrence set is generated by considering the initial StartDate property along with the RecurrenceRule, RecurrenceDates, RecurrenceExceptionRule, and RecurrenceExceptionDates properties contained within the recurring event. The StartDate property defines the first instance in the recurrence set. The starting date SHOULD match the pattern of the recurrence rule, if specified. The recurrence set generated with a start date that doesn't match the pattern of the rule is undefined. The final recurrence set is generated by gathering all of the start DATE-TIME values generated by any of the specified RecurrenceRule and RecurrenceDates properties, and then excluding any start DATE-TIME values specified by the RecurrenceExceptionRule or RecurrenceExceptionDates properties. This implies that DATE-TIME values specified by the RecurrenceExceptionRule and RecurrenceExceptionDates properties take precedence over those specified by inclusion properties (i.e., RecurrenceDates and RecurrenceRule). When duplicate instances are generated by the recurrence RecurrenceRule and RecurrenceDates properties, only one recurrence is considered. Duplicate instances are ignored.

The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

This property is filled after retrieving a calendar event, and is also used to create an event to put on the server. However, when requesting a report the contents of this property will only be valid inside the CalDAV EventDetails event.

Data Type

String

RecurrenceExceptionRule Property (CalDAV Component)

Defines a rule or repeating pattern for an exception to the recurrence set.

Syntax

__property String RecurrenceExceptionRule = { read=FRecurrenceExceptionRule, write=FSetRecurrenceExceptionRule };

Default Value

""

Remarks

Defines a rule or repeating pattern for an exception to the recurrence set.

If the RecurrenceExceptionDates and RecurrenceExceptionRule are specified, they are used in computing the recurrence set. The recurrence set is the complete set of recurrence instances for a calendar component. The recurrence set is generated by considering the initial StartDate property along with the RecurrenceRule, RecurrenceDates, RecurrenceExceptionRule, and RecurrenceExceptionDates properties contained within the recurring event. The StartDate property defines the first instance in the recurrence set. The starting date SHOULD match the pattern of the recurrence rule, if specified. The recurrence set generated with a start date that doesn't match the pattern of the rule is undefined. The final recurrence set is generated by gathering all of the start DATE-TIME values generated by any of the specified RecurrenceRule and RecurrenceDates properties, and then excluding any start DATE-TIME values specified by the RecurrenceExceptionRule or RecurrenceExceptionDates properties. This implies that DATE-TIME values specified by the RecurrenceExceptionRule and RecurrenceExceptionDates properties take precedence over those specified by inclusion properties (i.e., RecurrenceDates and RecurrenceRule). When duplicate instances are generated by the recurrence RecurrenceRule and RecurrenceDates properties, only one recurrence is considered. Duplicate instances are ignored.

This value type is a structured value consisting of a list of one or more recurrence grammar parts. Each rule part is defined by a NAME=VALUE pair. The rule parts are separated from each other by the SEMICOLON character. The rule parts are not ordered in any particular sequence. Individual rule parts MUST only be specified once.

The table below shows the supported rules and their usage.

Information not contained in the RecurrenceRule necessary to determine the various recurrence instance start time and dates are derived from the StartDate property. For example, "FREQ=YEARLY;BYMONTH=1" doesn't specify a specific day within the month or a time. This information would be the same as what is specified for the StartDate property.

BYxxx rule parts modify the recurrence in some manner. BYxxx rule parts for a period of time that is the same or greater than the frequency generally reduce or limit the number of occurrences of the recurrence generated. For example, "FREQ=DAILY;BYMONTH=1" reduces the number of recurrence instances from all days (if BYMONTH rule part is not present) to all days in January. BYxxx rule parts for a period of time less than the frequency generally increase or expand the number of occurrences of the recurrence. For example, "FREQ=YEARLY;BYMONTH=1,2" increases the number of days within the yearly recurrence set from 1 (if BYMONTH rule part is not present) to 2.

If multiple BYxxx rule parts are specified, then after evaluating the specified FREQ and INTERVAL rule parts, the BYxxx rule parts are applied to the current set of evaluated occurrences in the following order: BYMONTH, BYWEEKNO, BYYEARDAY, BYMONTHDAY, BYDAY, BYHOUR, BYMINUTE, BYSECOND and BYSETPOS; then COUNT and UNTIL are evaluated.

This property is filled after retrieving a calendar event, and is also used to create an event to put on the server. However, when requesting a report the contents of this property will only be valid inside the CalDAV EventDetails event.

Data Type

String

RecurrenceId Property (CalDAV Component)

Identifies a recurring event.

Syntax

__property String RecurrenceId = { read=FRecurrenceId, write=FSetRecurrenceId };

Default Value

""

Remarks

Identifies a recurring event.

This property is used in conjunction with the CalDAV UID and Sequence properties to identify a specific instance of a recurring event, todo, or journal. The value of this property is the value of the CalDAV StartDate property of the original recurrence instance.

This property is filled after retrieving a calendar event, and is also used to create an event to put on the server. However, when requesting a report the contents of this property will only be valid inside the CalDAV EventDetails event.

Data Type

String

RecurrenceRule Property (CalDAV Component)

This property defines the recurrence rule for the event.

Syntax

__property String RecurrenceRule = { read=FRecurrenceRule, write=FSetRecurrenceRule };

Default Value

""

Remarks

This property defines the recurrence rule for the event.

This value type is a structured value consisting of a list of one or more recurrence grammar parts. Each rule part is defined by a NAME=VALUE pair. The rule parts are separated from each other by the SEMICOLON character. The rule parts are not ordered in any particular sequence. Individual rule parts MUST only be specified once.

The table below shows the supported rules and their usage.

Information not contained in the RecurrenceRule necessary to determine the various recurrence instance start time and dates are derived from the StartDate property. For example, "FREQ=YEARLY;BYMONTH=1" doesn't specify a specific day within the month or a time. This information would be the same as what is specified for the StartDate property.

BYxxx rule parts modify the recurrence in some manner. BYxxx rule parts for a period of time that is the same or greater than the frequency generally reduce or limit the number of occurrences of the recurrence generated. For example, "FREQ=DAILY;BYMONTH=1" reduces the number of recurrence instances from all days (if BYMONTH rule part is not present) to all days in January. BYxxx rule parts for a period of time less than the frequency generally increase or expand the number of occurrences of the recurrence. For example, "FREQ=YEARLY;BYMONTH=1,2" increases the number of days within the yearly recurrence set from 1 (if BYMONTH rule part is not present) to 2.

If multiple BYxxx rule parts are specified, then after evaluating the specified FREQ and INTERVAL rule parts, the BYxxx rule parts are applied to the current set of evaluated occurrences in the following order: BYMONTH, BYWEEKNO, BYYEARDAY, BYMONTHDAY, BYDAY, BYHOUR, BYMINUTE, BYSECOND and BYSETPOS; then COUNT and UNTIL are evaluated.

This property is filled after retrieving a calendar event, and is also used to create an event to put on the server. However, when requesting a report the contents of this property will only be valid inside the CalDAV EventDetails event.

Data Type

String

ReportFilterAlarmEnd Property (CalDAV Component)

Limits the events returned in the report to only those with an alarm set in the range specified by AlarmStart and AlarmEnd .

Syntax

__property String ReportFilterAlarmEnd = { read=FReportFilterAlarmEnd, write=FSetReportFilterAlarmEnd };

Default Value

""

Remarks

Limits the events returned in the report to only those with an alarm set in the range specified by ReportFilterAlarmStart and ReportFilterAlarmEnd. The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

Data Type

String

ReportFilterAlarmStart Property (CalDAV Component)

Limits the events returned in the report to only those with an alarm set in the range specified by AlarmStart and AlarmEnd .

Syntax

__property String ReportFilterAlarmStart = { read=FReportFilterAlarmStart, write=FSetReportFilterAlarmStart };

Default Value

""

Remarks

Limits the events returned in the report to only those with an alarm set in the range specified by ReportFilterAlarmStart and ReportFilterAlarmEnd. The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

Data Type

String

ReportFilterCustomFilter Property (CalDAV Component)

Allows the user to specify his own filter XML.

Syntax

__property String ReportFilterCustomFilter = { read=FReportFilterCustomFilter, write=FSetReportFilterCustomFilter };

Default Value

""

Remarks

Allows the user to specify his own filter XML. This property must be properly-formed XML, and must be a supported CalDAV filter or the component raises an exception.

Data Type

String

ReportFilterEndDate Property (CalDAV Component)

Limits the events returned in the report to only those which occur in the time range specified by StartDate and EndDate .

Syntax

__property String ReportFilterEndDate = { read=FReportFilterEndDate, write=FSetReportFilterEndDate };

Default Value

""

Remarks

Limits the events returned in the report to only those which occur in the time range specified by ReportFilterStartDate and ReportFilterEndDate. The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

Data Type

String

ReportFilterEventType Property (CalDAV Component)

Indicates the type of calendar object resources to return in a Report.

Syntax

__property TipwCalDAVReportFilterEventTypes ReportFilterEventType = { read=FReportFilterEventType, write=FSetReportFilterEventType };

enum TipwCalDAVReportFilterEventTypes {
  vtEvent=0,
  vtTodo=1,
  vtJournal=2,
  vtFreeBusy=3,
  vtAll=4
};

Default Value

vtEvent

Remarks

Indicates the type of calendar object resources to return in a Report. Some calendar servers (Google in particular) do not support vtAll, so you must submit a report for each type of event you wish to retrieve a report on.

Data Type

Integer

ReportFilterProperty Property (CalDAV Component)

Limits the events returned in a Report to only those which contain a matching property name and value.

Syntax

__property String ReportFilterProperty = { read=FReportFilterProperty, write=FSetReportFilterProperty };

Default Value

""

Remarks

Limits the events returned in a Report to only those which contain a matching property name and value. For instance, setting the ReportFilterProperty filter to "ORGANIZER" will return only events that have an organizer specified. Setting the ReportFilterProperty filter to "ORGANIZER=mailto:JohnSmith@example.com" will return only resources where "mailto:JohnSmith@example.com" is the specified organizer. Likewise, you can retrieve a report on a single event by setting the ReportFilterProperty filter with the UID of the needed resource. For example: ReportFilterProperty = "UID=DC6C50A017428C5216A2F1CD@example.com";.

You may add multiple properties to the filter by separating them with commas. For example: "ORGANIZER=mailto:JohnSmith@example.com, STATUS=CANCELLED".

For more advanced filtering, you may specify your own ReportFilterCustomFilter.

Data Type

String

ReportFilterRecurEnd Property (CalDAV Component)

Limits the recurring events returned in the report.

Syntax

__property String ReportFilterRecurEnd = { read=FReportFilterRecurEnd, write=FSetReportFilterRecurEnd };

Default Value

""

Remarks

Limits the recurring events returned in the report.

Use of the CalDAV limit-recurrence-set element causes the server to only return overridden recurrence components that overlap the time range specified by ReportFilterRecurStart and ReportFilterRecurEnd or that affect other instances that overlap the time range specified by ReportFilterStartDate and ReportFilterEndDate. The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

Note that the ReportFilterRecurEnd property cannot be used when ReportFilterReturnCalendarData is False.

Data Type

String

ReportFilterRecurStart Property (CalDAV Component)

Limits the recurring events returned in the report.

Syntax

__property String ReportFilterRecurStart = { read=FReportFilterRecurStart, write=FSetReportFilterRecurStart };

Default Value

""

Remarks

Limits the recurring events returned in the report.

Use of the CalDAV limit-recurrence-set element causes the server to only return overridden recurrence components that overlap the time range specified by ReportFilterRecurStart and ReportFilterRecurEnd or that affect other instances that overlap the time range specified by ReportFilterStartDate and ReportFilterEndDate. The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

Note that the ReportFilterRecurStart property cannot be used when ReportFilterReturnCalendarData is False.

Data Type

String

ReportFilterReturnCalendarData Property (CalDAV Component)

Controls whether the contents of each calendar event is returned in the report.

Syntax

__property bool ReportFilterReturnCalendarData = { read=FReportFilterReturnCalendarData, write=FSetReportFilterReturnCalendarData };

Default Value

true

Remarks

Controls whether the contents of each calendar event is returned in the report.

If ReportFilterReturnCalendarData is True (default), a report will contain the full contents of each event in the calendar. This can be a substantially large amount of data. However if ReportFilterReturnCalendarData is False, the report returned will contain only URIs and ETags of each calendar event. You may compare the URIs against a cached list and retrieve any new URIs individually via the CalDAV.GetCalendarEvent method. If the ETag for a cached URI has changed, it means that the calendar event has changed, and needs to be retrieved.

Note that this filter is not compatible with the ReportFilterRecurStart and ReportFilterRecurEnd properties.

Data Type

Boolean

ReportFilterStartDate Property (CalDAV Component)

Limits the events returned in the report to only those which occur in the time range specified by StartDate and EndDate .

Syntax

__property String ReportFilterStartDate = { read=FReportFilterStartDate, write=FSetReportFilterStartDate };

Default Value

""

Remarks

Limits the events returned in the report to only those which occur in the time range specified by ReportFilterStartDate and ReportFilterEndDate. The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

Data Type

String

ReportFilterUID Property (CalDAV Component)

Limits the recurring events returned in the report to only those with the specified UID.

Syntax

__property String ReportFilterUID = { read=FReportFilterUID, write=FSetReportFilterUID };

Default Value

""

Remarks

Limits the recurring events returned in the report to only those with the specified UID.

Data Type

String

Sequence Property (CalDAV Component)

Defines the revision sequence number of the event within a sequence of revisions.

Syntax

__property int Sequence = { read=FSequence, write=FSetSequence };

Default Value

0

Remarks

This property defines the revision sequence number of the event within a sequence of revisions. When a calendar component is created its Sequence number is 0. It is incremented by the Organizer's Calendar User Agent (CUA) each time the Organizer makes a significant revision to the calendar event. Therefore, a Sequence number of 2 means the event has been revised twice.

The Organizer includes this property in a calendar event that it sends to an Attendees to specify the current version of the event. Likewise, the Attendees includes this property in an event that it sends to the Organizer to specify the version of the calendar component to which the Attendees is referring.

Note: Recurrence instances of a recurring event may have different sequence numbers.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

Integer

SSLAcceptServerCertEncoded Property (CalDAV Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLAcceptServerCertEncoded = { read=FSSLAcceptServerCertEncoded, write=FSetSSLAcceptServerCertEncoded };
__property DynamicArray<Byte> SSLAcceptServerCertEncodedB = { read=FSSLAcceptServerCertEncodedB, write=FSetSSLAcceptServerCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLAcceptServerCertStore and SSLAcceptServerCertSubject properties also may be used to specify a certificate.

When SSLAcceptServerCertEncoded is set, a search is initiated in the current SSLAcceptServerCertStore for the private key of the certificate. If the key is found, SSLAcceptServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLAcceptServerCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertEncoded Property (CalDAV Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLCertEncoded = { read=FSSLCertEncoded, write=FSetSSLCertEncoded };
__property DynamicArray<Byte> SSLCertEncodedB = { read=FSSLCertEncodedB, write=FSetSSLCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLCertStore and SSLCertSubject properties also may be used to specify a certificate.

When SSLCertEncoded is set, a search is initiated in the current SSLCertStore for the private key of the certificate. If the key is found, SSLCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLCertSubject is set to an empty string.

This property is not available at design time.

Data Type

Byte Array

SSLCertStore Property (CalDAV Component)

This is the name of the certificate store for the client certificate.

Syntax

__property String SSLCertStore = { read=FSSLCertStore, write=FSetSSLCertStore };
__property DynamicArray<Byte> SSLCertStoreB = { read=FSSLCertStoreB, write=FSetSSLCertStoreB };

Default Value

"MY"

Remarks

This is the name of the certificate store for the client certificate.

The SSLCertStoreType property denotes the type of the certificate store specified by SSLCertStore. If the store is password protected, specify the password in SSLCertStorePassword.

SSLCertStore is used in conjunction with the SSLCertSubject property to specify client certificates. If SSLCertStore has a value, and SSLCertSubject or SSLCertEncoded is set, a search for a certificate is initiated. Please see the SSLCertSubject property for details.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).

Data Type

Byte Array

SSLCertStorePassword Property (CalDAV Component)

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Syntax

__property String SSLCertStorePassword = { read=FSSLCertStorePassword, write=FSetSSLCertStorePassword };

Default Value

""

Remarks

If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.

Data Type

String

SSLCertStoreType Property (CalDAV Component)

This is the type of certificate store for this certificate.

Syntax

__property TipwCalDAVSSLCertStoreTypes SSLCertStoreType = { read=FSSLCertStoreType, write=FSetSSLCertStoreType };

enum TipwCalDAVSSLCertStoreTypes {
  cstUser=0,
  cstMachine=1,
  cstPFXFile=2,
  cstPFXBlob=3,
  cstJKSFile=4,
  cstJKSBlob=5,
  cstPEMKeyFile=6,
  cstPEMKeyBlob=7,
  cstPublicKeyFile=8,
  cstPublicKeyBlob=9,
  cstSSHPublicKeyBlob=10,
  cstP7BFile=11,
  cstP7BBlob=12,
  cstSSHPublicKeyFile=13,
  cstPPKFile=14,
  cstPPKBlob=15,
  cstXMLFile=16,
  cstXMLBlob=17,
  cstJWKFile=18,
  cstJWKBlob=19,
  cstSecurityKey=20,
  cstBCFKSFile=21,
  cstBCFKSBlob=22,
  cstPKCS11=23,
  cstAuto=99
};

Default Value

cstUser

Remarks

This is the type of certificate store for this certificate.

The component supports both public and private keys in a variety of formats. When the cstAuto value is used the component will automatically determine the type. This property can take one of the following values:

Data Type

Integer

SSLCertSubject Property (CalDAV Component)

This is the subject of the certificate used for client authentication.

Syntax

__property String SSLCertSubject = { read=FSSLCertSubject, write=FSetSSLCertSubject };

Default Value

""

Remarks

This is the subject of the certificate used for client authentication.

This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.

If a matching certificate is found, the property is set to the full subject of the matching certificate.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks a random certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are displayed below.

If a field value contains a comma it must be quoted.

Data Type

String

SSLProvider Property (CalDAV Component)

This specifies the SSL/TLS implementation to use.

Syntax

__property TipwCalDAVSSLProviders SSLProvider = { read=FSSLProvider, write=FSetSSLProvider };

enum TipwCalDAVSSLProviders {
  sslpAutomatic=0,
  sslpPlatform=1,
  sslpInternal=2
};

Default Value

sslpAutomatic

Remarks

This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic) the component will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.

Possible values are:

In most cases using the default value (Automatic) is recommended. The component will select a provider depending on the current platform.

When Automatic is selected the platform implementation is used by default. When TLS 1.3 is enabled via SSLEnabledProtocols the internal implementation is used.

Data Type

Integer

SSLServerCertEncoded Property (CalDAV Component)

This is the certificate (PEM/base64 encoded).

Syntax

__property String SSLServerCertEncoded = { read=FSSLServerCertEncoded };
__property DynamicArray<Byte> SSLServerCertEncodedB = { read=FSSLServerCertEncodedB };

Default Value

""

Remarks

This is the certificate (PEM/base64 encoded). This property is used to assign a specific certificate. The SSLServerCertStore and SSLServerCertSubject properties also may be used to specify a certificate.

When SSLServerCertEncoded is set, a search is initiated in the current SSLServerCertStore for the private key of the certificate. If the key is found, SSLServerCertSubject is updated to reflect the full subject of the selected certificate; otherwise, SSLServerCertSubject is set to an empty string.

This property is read-only and not available at design time.

Data Type

Byte Array

StartDate Property (CalDAV Component)

Specifies the date and time that an event begins.

Syntax

__property String StartDate = { read=FStartDate, write=FSetStartDate };

Default Value

""

Remarks

This property specifies the date and time that an event begins. The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

Status Property (CalDAV Component)

Defines the overall status or confirmation for the calendar event.

Syntax

__property String Status = { read=FStatus, write=FSetStatus };

Default Value

""

Remarks

In a group-scheduled calendar component, the property is used by the Organizer to provide a confirmation of the event to the Attendees. For example in a vEvent EventType the Organizer can indicate that a meeting is tentative, confirmed, or canceled. For a vTodo EventType, the Organizer can indicate that an action item needs action, is completed, is in process or being worked on, or has been canceled. In a vJournal EventType, the Organizer can indicate that a journal entry is draft, final, or has been canceled or removed.

Statuses for a vEvent EventType:

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

StatusLine Property (CalDAV Component)

This property is the first line of the last server response.

Syntax

__property String StatusLine = { read=FStatusLine };

Default Value

""

Remarks

This property contains the first line of the last server response. This value can be used for diagnostic purposes. If an HTTP error is returned when calling a method of the component, the error string is the same as the StatusLine property.

The HTTP protocol specifies the structure of the StatusLine as follows: [HTTP version] [Result Code] [Description].

This property is read-only and not available at design time.

Data Type

String

Summary Property (CalDAV Component)

Defines a short summary or subject for the calendar event.

Syntax

__property String Summary = { read=FSummary, write=FSetSummary };

Default Value

""

Remarks

This property defines a short summary or subject for the calendar event.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

Timeout Property (CalDAV Component)

A timeout for the component.

Syntax

__property int Timeout = { read=FTimeout, write=FSetTimeout };

Default Value

60

Remarks

If the Timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.

If Timeout is set to a positive value, the component will wait for the operation to complete before returning control.

The component will use DoEvents to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not "freeze" and remains responsive.

If Timeout expires, and the operation is not yet complete, the component raises an exception.

Please note that by default, all timeouts are inactivity timeouts, i.e. the timeout period is extended by Timeout seconds when any amount of data is successfully sent or received.

The default value for the Timeout property is 60 seconds.

Data Type

Integer

Timestamp Property (CalDAV Component)

Specifies the date and time that the instance of the event was created.

Syntax

__property String Timestamp = { read=FTimestamp, write=FSetTimestamp };

Default Value

""

Remarks

This property specifies the date and time that the instance of the event was created. The date/time format is "YYYYMMDDThhmmss", where "T" indicates the break between date and time. You may also append a 1-character alpha code for the timezone. For instance, "20100104T123456Z" indicates January 4th, 2010 at 12:34:56 PM UTC.

Note: This property must be specified in UTC time format.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

TimezoneDSTName Property (CalDAV Component)

The customary name for the daylight-savings time zone.

Syntax

__property String TimezoneDSTName = { read=FTimezoneDSTName, write=FSetTimezoneDSTName };

Default Value

""

Remarks

The customary name for the daylight-savings time zone. This could be used for displaying dates, and there is no restriction to the format. For instance, Eastern Daylight Time may be represented as "EDT", "Eastern Daylight Time (US & Canada)", or any other arbitrary representation.

The following example shows the CalTimezone set to Eastern time. CalDAV.Timezone.TimezoneId = "US-Eastern"; CalDAV.Timezone.URL = "http://zones.example.com/tz/America-New_York.ics" CalDAV.Timezone.StdName = "Eastern Standard Time (US & Canada)"; CalDAV.Timezone.StdStart = "20071104T020000"; CalDAV.Timezone.StdOffsetFrom = "-400"; CalDAV.Timezone.StdOffsetTo = "-500"; CalDAV.Timezone.StdRule = "FREQ=YEARLY;BYDAY=1SU;BYMONTH=11"; CalDAV.TimeZone.DSTName = "Eastern Daylight Time (US & Canada)"; CalDAV.TimeZone.DSTStart = "20070311T020000"; CalDAV.TimeZone.DSTOffsetFrom = "-500"; CalDAV.TimeZone.DSTOffsetTo = "-400"; CalDAV.TimeZone.DSTRule = "FREQ=YEARLY;BYDAY=2SU;BYMONTH=3";

Data Type

String

TimezoneDSTOffsetFrom Property (CalDAV Component)

The UTC offset that is in use when the onset of this time zone observance begins.

Syntax

__property String TimezoneDSTOffsetFrom = { read=FTimezoneDSTOffsetFrom, write=FSetTimezoneDSTOffsetFrom };

Default Value

""

Remarks

The UTC offset that is in use when the onset of this time zone observance begins. TimezoneDSTOffsetFrom is combined with TimezoneDSTStart to define the effective onset for the daylight-time time zone definition.

TimezoneDSTStart, TimezoneDSTOffsetFrom, and TimezoneDSTOffsetTo are all required to specify the daylight-savings time zone.

The following example shows the CalTimezone set to Eastern time. CalDAV.Timezone.TimezoneId = "US-Eastern"; CalDAV.Timezone.URL = "http://zones.example.com/tz/America-New_York.ics" CalDAV.Timezone.StdName = "Eastern Standard Time (US & Canada)"; CalDAV.Timezone.StdStart = "20071104T020000"; CalDAV.Timezone.StdOffsetFrom = "-400"; CalDAV.Timezone.StdOffsetTo = "-500"; CalDAV.Timezone.StdRule = "FREQ=YEARLY;BYDAY=1SU;BYMONTH=11"; CalDAV.TimeZone.DSTName = "Eastern Daylight Time (US & Canada)"; CalDAV.TimeZone.DSTStart = "20070311T020000"; CalDAV.TimeZone.DSTOffsetFrom = "-500"; CalDAV.TimeZone.DSTOffsetTo = "-400"; CalDAV.TimeZone.DSTRule = "FREQ=YEARLY;BYDAY=2SU;BYMONTH=3";

Data Type

String

TimezoneDSTOffsetTo Property (CalDAV Component)

The UTC offset for daylight savings time, when this observance is in use.

Syntax

__property String TimezoneDSTOffsetTo = { read=FTimezoneDSTOffsetTo, write=FSetTimezoneDSTOffsetTo };

Default Value

""

Remarks

The UTC offset for daylight savings time, when this observance is in use.

TimezoneDSTStart, TimezoneDSTOffsetFrom, and TimezoneDSTOffsetTo are all required to specify the daylight-savings time zone.

The following example shows the CalTimezone set to Eastern time. CalDAV.Timezone.TimezoneId = "US-Eastern"; CalDAV.Timezone.URL = "http://zones.example.com/tz/America-New_York.ics" CalDAV.Timezone.StdName = "Eastern Standard Time (US & Canada)"; CalDAV.Timezone.StdStart = "20071104T020000"; CalDAV.Timezone.StdOffsetFrom = "-400"; CalDAV.Timezone.StdOffsetTo = "-500"; CalDAV.Timezone.StdRule = "FREQ=YEARLY;BYDAY=1SU;BYMONTH=11"; CalDAV.TimeZone.DSTName = "Eastern Daylight Time (US & Canada)"; CalDAV.TimeZone.DSTStart = "20070311T020000"; CalDAV.TimeZone.DSTOffsetFrom = "-500"; CalDAV.TimeZone.DSTOffsetTo = "-400"; CalDAV.TimeZone.DSTRule = "FREQ=YEARLY;BYDAY=2SU;BYMONTH=3";

Data Type

String

TimezoneDSTRule Property (CalDAV Component)

This property defines the recurrence rule for the onset of this daylight savings time observance.

Syntax

__property String TimezoneDSTRule = { read=FTimezoneDSTRule, write=FSetTimezoneDSTRule };

Default Value

""

Remarks

This property defines the recurrence rule for the onset of this daylight savings time observance. Some specific requirements for the usage of TimezoneDSTRule for this purpose include:

For instance, in the USA Eastern Daylight time before 2007 started on the first Sunday of April. In 2007 Daylight time was changed to begin on the 2nd Sunday in March. Therefore, the UNTIL option should indicate the LAST time this rule will be observed. (2am on April 2nd, 2006). Such a time zone declaration would look like this: CalDAV.time zone.DSTName = "EDT" CalDAV.time zone.DSTStart = "19870405T020000" CalDAV.time zone.DSTOffsetFrom = "-500" CalDAV.time zone.DSTOffsetTo = "-400" CalDAV.time zone.DSTRule = "FREQ=YEARLY;BYMONTH=4;BYDAY=1SU;UNTIL=20060402T070000Z"

Data Type

String

TimezoneDSTStart Property (CalDAV Component)

The effective onset date and local time for the daylight-time time zone definition.

Syntax

__property String TimezoneDSTStart = { read=FTimezoneDSTStart, write=FSetTimezoneDSTStart };

Default Value

""

Remarks

The effective onset date and local time for the daylight-time time zone definition. The date and time MUST be specified as a date with a local time value in the format "YYYYMMDDThhmmss", where "T" indicates the break between date and time.

TimezoneDSTStart, TimezoneDSTOffsetFrom, and TimezoneDSTOffsetTo are all required to specify the daylight-savings time zone.

The following example shows the CalTimezone set to Eastern time. CalDAV.Timezone.TimezoneId = "US-Eastern"; CalDAV.Timezone.URL = "http://zones.example.com/tz/America-New_York.ics" CalDAV.Timezone.StdName = "Eastern Standard Time (US & Canada)"; CalDAV.Timezone.StdStart = "20071104T020000"; CalDAV.Timezone.StdOffsetFrom = "-400"; CalDAV.Timezone.StdOffsetTo = "-500"; CalDAV.Timezone.StdRule = "FREQ=YEARLY;BYDAY=1SU;BYMONTH=11"; CalDAV.TimeZone.DSTName = "Eastern Daylight Time (US & Canada)"; CalDAV.TimeZone.DSTStart = "20070311T020000"; CalDAV.TimeZone.DSTOffsetFrom = "-500"; CalDAV.TimeZone.DSTOffsetTo = "-400"; CalDAV.TimeZone.DSTRule = "FREQ=YEARLY;BYDAY=2SU;BYMONTH=3";

Data Type

String

TimezoneLastModified Property (CalDAV Component)

This optional property is a UTC value that specifies the date and time that this time zone definition was last updated.

Syntax

__property String TimezoneLastModified = { read=FTimezoneLastModified, write=FSetTimezoneLastModified };

Default Value

""

Remarks

This optional property is a UTC value that specifies the date and time that this time zone definition was last updated.

Data Type

String

TimezoneStdName Property (CalDAV Component)

The customary name for the standard time zone.

Syntax

__property String TimezoneStdName = { read=FTimezoneStdName, write=FSetTimezoneStdName };

Default Value

""

Remarks

The customary name for the standard time zone. This could be used for displaying dates, and there is no restriction to the format. For instance, Eastern Standard Time may be represented as "EST", "Eastern Standard Time (US & Canada)", or any other arbitrary representation.

The following example shows the CalTimezone set to Eastern time. CalDAV.Timezone.TimezoneId = "US-Eastern"; CalDAV.Timezone.URL = "http://zones.example.com/tz/America-New_York.ics" CalDAV.Timezone.StdName = "Eastern Standard Time (US & Canada)"; CalDAV.Timezone.StdStart = "20071104T020000"; CalDAV.Timezone.StdOffsetFrom = "-400"; CalDAV.Timezone.StdOffsetTo = "-500"; CalDAV.Timezone.StdRule = "FREQ=YEARLY;BYDAY=1SU;BYMONTH=11"; CalDAV.TimeZone.DSTName = "Eastern Daylight Time (US & Canada)"; CalDAV.TimeZone.DSTStart = "20070311T020000"; CalDAV.TimeZone.DSTOffsetFrom = "-500"; CalDAV.TimeZone.DSTOffsetTo = "-400"; CalDAV.TimeZone.DSTRule = "FREQ=YEARLY;BYDAY=2SU;BYMONTH=3";

Data Type

String

TimezoneStdOffsetFrom Property (CalDAV Component)

The UTC offset that is in use when the onset of this time zone observance begins.

Syntax

__property String TimezoneStdOffsetFrom = { read=FTimezoneStdOffsetFrom, write=FSetTimezoneStdOffsetFrom };

Default Value

""

Remarks

The UTC offset that is in use when the onset of this time zone observance begins. TimezoneStdOffsetFrom is combined with TimezoneStdStart to define the effective onset for the standard-time time zone definition.

TimezoneStdStart, TimezoneStdOffsetFrom, and TimezoneStdOffsetTo are all required to specify the standard-time time zone.

The following example shows the CalTimezone set to Eastern time. CalDAV.Timezone.TimezoneId = "US-Eastern"; CalDAV.Timezone.URL = "http://zones.example.com/tz/America-New_York.ics" CalDAV.Timezone.StdName = "Eastern Standard Time (US & Canada)"; CalDAV.Timezone.StdStart = "20071104T020000"; CalDAV.Timezone.StdOffsetFrom = "-400"; CalDAV.Timezone.StdOffsetTo = "-500"; CalDAV.Timezone.StdRule = "FREQ=YEARLY;BYDAY=1SU;BYMONTH=11"; CalDAV.TimeZone.DSTName = "Eastern Daylight Time (US & Canada)"; CalDAV.TimeZone.DSTStart = "20070311T020000"; CalDAV.TimeZone.DSTOffsetFrom = "-500"; CalDAV.TimeZone.DSTOffsetTo = "-400"; CalDAV.TimeZone.DSTRule = "FREQ=YEARLY;BYDAY=2SU;BYMONTH=3";

Data Type

String

TimezoneStdOffsetTo Property (CalDAV Component)

The UTC offset for standard time, when this observance is in use.

Syntax

__property String TimezoneStdOffsetTo = { read=FTimezoneStdOffsetTo, write=FSetTimezoneStdOffsetTo };

Default Value

""

Remarks

The UTC offset for standard time, when this observance is in use.

TimezoneStdStart, TimezoneStdOffsetFrom, and TimezoneStdOffsetTo are all required to specify the standard-time time zone.

The following example shows the CalTimezone set to Eastern time. CalDAV.Timezone.TimezoneId = "US-Eastern"; CalDAV.Timezone.URL = "http://zones.example.com/tz/America-New_York.ics" CalDAV.Timezone.StdName = "Eastern Standard Time (US & Canada)"; CalDAV.Timezone.StdStart = "20071104T020000"; CalDAV.Timezone.StdOffsetFrom = "-400"; CalDAV.Timezone.StdOffsetTo = "-500"; CalDAV.Timezone.StdRule = "FREQ=YEARLY;BYDAY=1SU;BYMONTH=11"; CalDAV.TimeZone.DSTName = "Eastern Daylight Time (US & Canada)"; CalDAV.TimeZone.DSTStart = "20070311T020000"; CalDAV.TimeZone.DSTOffsetFrom = "-500"; CalDAV.TimeZone.DSTOffsetTo = "-400"; CalDAV.TimeZone.DSTRule = "FREQ=YEARLY;BYDAY=2SU;BYMONTH=3";

Data Type

String

TimezoneStdRule Property (CalDAV Component)

This property defines the recurrence rule for the onset of this standard time observance.

Syntax

__property String TimezoneStdRule = { read=FTimezoneStdRule, write=FSetTimezoneStdRule };

Default Value

""

Remarks

This property defines the recurrence rule for the onset of this standard time observance. Some specific requirements for the usage of TimezoneDSTRule for this purpose include:

For instance, in the USA Eastern Standard time before 2007 started on the last Sunday of October. In 2007 Standard time was changed to begin on the 1st Sunday in November. Therefore, the UNTIL option should indicate the LAST time this rule will be observed. (2am on October 29th, 2006). Such a time zone declaration would look like this: CalDAV.time zone.StdName = "EST" CalDAV.time zone.StdStart = "19671029T020000" CalDAV.time zone.StdOffsetFrom = "-400" CalDAV.time zone.StdOffsetTo = "-500" CalDAV.time zone.StdRule = "FREQ=YEARLY;BYMONTH=10;BYDAY=-1SU;UNTIL=20061029T060000Z"

Data Type

String

TimezoneStdStart Property (CalDAV Component)

The effective onset date and local time for the standard-time time zone definition.

Syntax

__property String TimezoneStdStart = { read=FTimezoneStdStart, write=FSetTimezoneStdStart };

Default Value

""

Remarks

The effective onset date and local time for the standard-time time zone definition. The date and time MUST be specified as a date with a local time value. in the format "YYYYMMDDThhmmss", where "T" indicates the break between date and time.

TimezoneStdStart, TimezoneStdOffsetFrom, and TimezoneStdOffsetTo are all required to specify the standard-time time zone.

The following example shows the CalTimezone set to Eastern time. CalDAV.Timezone.TimezoneId = "US-Eastern"; CalDAV.Timezone.URL = "http://zones.example.com/tz/America-New_York.ics" CalDAV.Timezone.StdName = "Eastern Standard Time (US & Canada)"; CalDAV.Timezone.StdStart = "20071104T020000"; CalDAV.Timezone.StdOffsetFrom = "-400"; CalDAV.Timezone.StdOffsetTo = "-500"; CalDAV.Timezone.StdRule = "FREQ=YEARLY;BYDAY=1SU;BYMONTH=11"; CalDAV.TimeZone.DSTName = "Eastern Daylight Time (US & Canada)"; CalDAV.TimeZone.DSTStart = "20070311T020000"; CalDAV.TimeZone.DSTOffsetFrom = "-500"; CalDAV.TimeZone.DSTOffsetTo = "-400"; CalDAV.TimeZone.DSTRule = "FREQ=YEARLY;BYDAY=2SU;BYMONTH=3";

Data Type

String

TimezoneId Property (CalDAV Component)

This property specifies a text value that uniquely identifies this CalTimezone calendar component.

Syntax

__property String TimezoneId = { read=FTimezoneId, write=FSetTimezoneId };

Default Value

""

Remarks

This property specifies a text value that uniquely identifies this CalTimezone calendar component.

Note: This document does not define a naming convention for time zone identifiers. Implementers may want to use the naming conventions defined in existing time zone specifications such as the public-domain TZ database [TZDB].

This property is required. If it is not present, no time zone information will be generated inside the MakeCalendar request.

Data Type

String

TimezoneURL Property (CalDAV Component)

Optionally points to a published time zone definition.

Syntax

__property String TimezoneURL = { read=FTimezoneURL, write=FSetTimezoneURL };

Default Value

""

Remarks

Optionally points to a published time zone definition. If set, this property should refer to a resource that is accessible by anyone who might need to interpret the object. This should not normally be a "file" URL or other URL that is not widely accessible.

Data Type

String

Transparency Property (CalDAV Component)

Defines whether or not an event is transparent to busy time searches.

Syntax

__property String Transparency = { read=FTransparency, write=FSetTransparency };

Default Value

""

Remarks

This property defines whether or not an event is transparent to busy time searches. Time Transparency is the characteristic of an event that determines whether it appears to consume time on a calendar. Events that consume actual time for the individual or resource associated with the calendar SHOULD be recorded as "OPAQUE", allowing them to be detected by free/busy time searches. Other events, which do not take up the individual's (or resource's) time SHOULD be recorded as "TRANSPARENT", making them invisible to free/ busy time searches.

Custom transparency values may or may not be supported by your calendar implementation, but all implementations will support the "OPAQUE" and "TRANSPARENT" values.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

UID Property (CalDAV Component)

A persistent, globally unique identifier for the calendar event.

Syntax

__property String UID = { read=FUID, write=FSetUID };

Default Value

""

Remarks

This property contains a persistent, globally unique identifier. The generator of the identifier MUST guarantee that the identifier is unique. There are several algorithms that can be used to accomplish this. A good method to assure uniqueness is to put the domain name or a domain literal IP address of the host on which the identifier was created on the right-hand side of an "@", and on the left-hand side, put a combination of the current calendar date and time of day (i.e., formatted in as a date/time value) along with some other currently unique (perhaps sequential) identifier available on the system (for example, a process id number). Using a date/time value on the left-hand side and a domain name or domain literal on the right-hand side makes it possible to guarantee uniqueness since no two hosts should be using the same domain name or IP address at the same time. Though other algorithms will work, it is recommended that the right-hand side contain some domain identifier (either of the host itself or otherwise) such that the generator of the message identifier can guarantee the uniqueness of the left-hand side within the scope of that domain.

NOTE: Some CalDAV servers (Yahoo for example) require that the UID and the filename portion of the Resource URI match. For example, if the UID is "hello_world" then the ResourceURI parameter of the PutCalendarEvent should be "https://caldav.calendar.yahoo.com/dav/user_name/Calendar/My_Calendar/hello_world.ics". If the UID and filename portion of the URI do not match, the Yahoo CalDAV server will return a "302 Found" response indicating that the requested resource resides under a different URI. (Meaning the event was not added to the calendar)

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

Data Type

String

URL Property (CalDAV Component)

Location of the event resource on the CalDAV server.

Syntax

__property String URL = { read=FURL };

Default Value

""

Remarks

This property is read-only, and will be filled with the location of the event resource for each event returned. This will only be returned in response to a GetCalendarReport transaction.

This property is filled from the response to a GetCalendarEvent, and is also used when creating an event to be added using the PutCalendarEvent method. However, when requesting a report using the GetCalendarReport method, the contents of this property will only be valid inside the EventDetails event.

This property is read-only.

Data Type

String

User Property (CalDAV Component)

This property includes a user name if authentication is to be used.

Syntax

__property String User = { read=FUser, write=FSetUser };

Default Value

""

Remarks

This property contains a user name if authentication is to be used. If AuthScheme is set to HTTP Basic Authentication, The User and Password are Base64 encoded, and the result is put in the Authorization property in the form "Basic [encoded-user-password]".

If AuthScheme is set to HTTP Digest Authentication, the User and Password properties are used to respond to the HTTP Digest Authentication challenge from the server.

If AuthScheme is set to NTLM, NTLM authentication will be attempted. If AuthScheme is set to NTLM, and User and Password are empty, the component will attempt to authenticate using the current user's credentials.

Data Type

String

AddCookie Method (CalDAV Component)

This method adds a cookie and the corresponding value to the outgoing request headers.

Syntax

void __fastcall AddCookie(String CookieName, String CookieValue);

Remarks

This property adds a cookie and the corresponding value to the outgoing request headers. Please refer to the Cookies property for more information on cookies and how they are managed.

AddCustomProperty Method (CalDAV Component)

Adds a form variable and the corresponding value.

Syntax

void __fastcall AddCustomProperty(String VarName, String VarValue);

Remarks

This property adds a form variable and the corresponding value. For information on form variables and how they are managed, please refer to the CustomProperties properties.

Example using the AddCustomProperty method:

CalDAVControl.Reset() CalDAVControl.AddCustomProperty("propname1", "propvalue1") CalDAVControl.AddCustomProperty("propname2", "propvalue2") Example using Custom Property arrays: CalDAVControl.Reset() CalDAVControl.CustomPropertyCount = 2 CalDAVControl.CustomPropertyName (0) = "propname1" CalDAVControl.CustomPropertyValue(0) = "propvalue1" CalDAVControl.CustomPropertyName (1) = "propname2" CalDAVControl.CustomPropertyValue(1) = "propvalue2"

Config Method (CalDAV Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CopyCalendarEvent Method (CalDAV Component)

Copy events to a new location.

Syntax

void __fastcall CopyCalendarEvent(String SourceResourceURI, String DestinationResourceURI);

Remarks

The CopyCalendarEvent method will copy the resource indicated by SourceResourceURI to a new location under the resource indicated by DestinationResourceURI.

This method is associated with the Depth property. If Depth is set to "0", the component will copy only SourceResourceURI. If Depth is set to "infinity", the component will copy SourceResourceURI and its entire subtree to the relative locations.

If the user has acquired a LockCalendar of infinite depth on either DestinationResourceURI or any collection it is under, SourceResourceURI will be added to that lock.

Note that neither Yahoo nor Google CalDAV servers support locking, copying, or moving calendar resources.

There is no standard format for resource URIs. Google for instance, uses "https://www.google.com/calendar/dav/" plus your email address to access the default calendar. So "https://www.google.com/calendar/dav/username@gmail.com/" is the base URI for the default calendar. If you have multiple calendars, replace the email address portion above with the Id of the calendar, plus "@group.calendar.google.com/". For instance: "https://www.google.com/calendar/dav/ev3nkr4ua83jej7q32oumn5eeo@group.calendar.google.com/". For Google, calendar events are stored in the "/events/" path. To retrieve a report on a calendar, you'd add "/events/" to one of the above paths. For example: CalDAV.GetCalendarReport("https://www.google.com/calendar/dav/username@gmail.com/events/"); Leaving the "/events/" out of the URI will result in an HTTP protocol error: 405 Method not allowed.

To add or retrieve an event, add the UID of the event you're creating or retrieving plus ".ics" to the path. Note that when putting an event with the PutCalendarEvent method, if the resourceURI and the UID do not match Google will create the event using the UID stored in the UID property. The actual location of will be newly added event will be returned in a "Location" header. This is the resource URI you must use to retrieve the event with GetCalendarEvent. For example: CalDAV.UID = "1234567890"; CalDAV.PutCalendarEvent("https://www.google.com/calendar/dav/username@gmail.com/events/1234567890.ics");

Yahoo uses a different format for CalDAV access. Yahoo's ResourceURIs always start with "https://caldav.calendar.yahoo.com/dav/" plus your user name, plus "/Calendar/" plus the name of your calendar. For instance: "https://caldav.calendar.yahoo.com/dav/username/Calendar/Your_Name" for the default calendar. (Yahoo uses your name to create the default calendar). When using the CreateCalendar event to create a new calendar, replace "Your_Name" in the URI with the desired name of your new calendar. Event resources are located directly under the "/Calendar/Calendar_Name/" path. Like Google, the UID and filename portion of the resource URI must match, but Yahoo will actually return an HTTP protocol error if they differ. The examples below show a few possible transactions: CalDAVS1.User = "username"; CalDAVS1.Password = "password"; CalDAV.DisplayName = "My Hockey Calendar"; CalDAV.CreateCalendar("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/"); CalDAV.StartDate = "20100401T040000"; CalDAV.EndDate = "20100401T060000"; CalDAV.UID = "qwerty1234567"; CalDAV.Summary = "First Practice"; CalDAV.Location = "Rink on 1st and main"; CalDAV.EventType = vEvent; CalDAV.PutCalendarEvent("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/qwerty1234567.ics"); CalDAV.GetCalendarReport("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/");

CreateCalendar Method (CalDAV Component)

Creates a new calendar collection resource.

Syntax

void __fastcall CreateCalendar(String ResourceURI);

Remarks

The CreateCalendar method creates a new calendar collection resource. A server MAY restrict calendar collection creation to particular collections. Creating calendar collections is not supported by all CalDAV servers. Some calendar stores only support one calendar per user (or principal), and those are typically pre-created for each account.

The following properties are used to create a new calendar collection resource:

• Description
• DisplayName
• Timezone

The following example shows how to create a simple new calendar collection resource with Yahoo Calendar. CalDAVS1.DisplayName = "Testing Create Calendar method"; CalDAVS1.Description = "Test Calendar"; CalDAVS1.CreateCalendar("https://caldav.calendar.yahoo.com/dav/userid/Calendar/TestCal1");

Note that Google does not support creating a new calendar through CalDAV. It must be created through the Google calendar web interface.

There is no standard format for resource URIs. Google for instance, uses "https://www.google.com/calendar/dav/" plus your email address to access the default calendar. So "https://www.google.com/calendar/dav/username@gmail.com/" is the base URI for the default calendar. If you have multiple calendars, replace the email address portion above with the Id of the calendar, plus "@group.calendar.google.com/". For instance: "https://www.google.com/calendar/dav/ev3nkr4ua83jej7q32oumn5eeo@group.calendar.google.com/". For Google, calendar events are stored in the "/events/" path. To retrieve a report on a calendar, you'd add "/events/" to one of the above paths. For example: CalDAV.GetCalendarReport("https://www.google.com/calendar/dav/username@gmail.com/events/"); Leaving the "/events/" out of the URI will result in an HTTP protocol error: 405 Method not allowed.

To add or retrieve an event, add the UID of the event you're creating or retrieving plus ".ics" to the path. Note that when putting an event with the PutCalendarEvent method, if the resourceURI and the UID do not match Google will create the event using the UID stored in the UID property. The actual location of will be newly added event will be returned in a "Location" header. This is the resource URI you must use to retrieve the event with GetCalendarEvent. For example: CalDAV.UID = "1234567890"; CalDAV.PutCalendarEvent("https://www.google.com/calendar/dav/username@gmail.com/events/1234567890.ics");

Yahoo uses a different format for CalDAV access. Yahoo's ResourceURIs always start with "https://caldav.calendar.yahoo.com/dav/" plus your user name, plus "/Calendar/" plus the name of your calendar. For instance: "https://caldav.calendar.yahoo.com/dav/username/Calendar/Your_Name" for the default calendar. (Yahoo uses your name to create the default calendar). When using the CreateCalendar event to create a new calendar, replace "Your_Name" in the URI with the desired name of your new calendar. Event resources are located directly under the "/Calendar/Calendar_Name/" path. Like Google, the UID and filename portion of the resource URI must match, but Yahoo will actually return an HTTP protocol error if they differ. The examples below show a few possible transactions: CalDAVS1.User = "username"; CalDAVS1.Password = "password"; CalDAV.DisplayName = "My Hockey Calendar"; CalDAV.CreateCalendar("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/"); CalDAV.StartDate = "20100401T040000"; CalDAV.EndDate = "20100401T060000"; CalDAV.UID = "qwerty1234567"; CalDAV.Summary = "First Practice"; CalDAV.Location = "Rink on 1st and main"; CalDAV.EventType = vEvent; CalDAV.PutCalendarEvent("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/qwerty1234567.ics"); CalDAV.GetCalendarReport("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/");

DeleteCalendarEvent Method (CalDAV Component)

Delete a resource or collection.

Syntax

void __fastcall DeleteCalendarEvent(String ResourceURI);

Remarks

This method behaves independently of the Depth property. It is used to delete the resource or collection specified by ResourceURI. If ResourceURI denotes a non-collection resource, it is first removed from any collection in which it is contained, it is then removed from the server. If ResourceURI denotes a collection, the server behaves as if the command were issued with an infinite depth (i.e., all internal member URIs denoting single resources or collections are deleted).

There is no standard format for resource URIs. Google for instance, uses "https://www.google.com/calendar/dav/" plus your email address to access the default calendar. So "https://www.google.com/calendar/dav/username@gmail.com/" is the base URI for the default calendar. If you have multiple calendars, replace the email address portion above with the Id of the calendar, plus "@group.calendar.google.com/". For instance: "https://www.google.com/calendar/dav/ev3nkr4ua83jej7q32oumn5eeo@group.calendar.google.com/". For Google, calendar events are stored in the "/events/" path. To retrieve a report on a calendar, you'd add "/events/" to one of the above paths. For example: CalDAV.GetCalendarReport("https://www.google.com/calendar/dav/username@gmail.com/events/"); Leaving the "/events/" out of the URI will result in an HTTP protocol error: 405 Method not allowed.

To add or retrieve an event, add the UID of the event you're creating or retrieving plus ".ics" to the path. Note that when putting an event with the PutCalendarEvent method, if the resourceURI and the UID do not match Google will create the event using the UID stored in the UID property. The actual location of will be newly added event will be returned in a "Location" header. This is the resource URI you must use to retrieve the event with GetCalendarEvent. For example: CalDAV.UID = "1234567890"; CalDAV.PutCalendarEvent("https://www.google.com/calendar/dav/username@gmail.com/events/1234567890.ics");

Yahoo uses a different format for CalDAV access. Yahoo's ResourceURIs always start with "https://caldav.calendar.yahoo.com/dav/" plus your user name, plus "/Calendar/" plus the name of your calendar. For instance: "https://caldav.calendar.yahoo.com/dav/username/Calendar/Your_Name" for the default calendar. (Yahoo uses your name to create the default calendar). When using the CreateCalendar event to create a new calendar, replace "Your_Name" in the URI with the desired name of your new calendar. Event resources are located directly under the "/Calendar/Calendar_Name/" path. Like Google, the UID and filename portion of the resource URI must match, but Yahoo will actually return an HTTP protocol error if they differ. The examples below show a few possible transactions: CalDAVS1.User = "username"; CalDAVS1.Password = "password"; CalDAV.DisplayName = "My Hockey Calendar"; CalDAV.CreateCalendar("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/"); CalDAV.StartDate = "20100401T040000"; CalDAV.EndDate = "20100401T060000"; CalDAV.UID = "qwerty1234567"; CalDAV.Summary = "First Practice"; CalDAV.Location = "Rink on 1st and main"; CalDAV.EventType = vEvent; CalDAV.PutCalendarEvent("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/qwerty1234567.ics"); CalDAV.GetCalendarReport("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/");

DoEvents Method (CalDAV Component)

Processes events from the internal message queue.

Syntax

void __fastcall DoEvents();

Remarks

When DoEvents is called, the component processes any available events. If no events are available, it waits for a preset period of time, and then returns.

ExportICS Method (CalDAV Component)

Generates an event from the properties in the iCal (.ICS) format.

Syntax

String __fastcall ExportICS();

Remarks

The ExportICS method is used to create a calendar object and export it in the iCal/ICS format, which can then be saved to disk and imported using any calendar software, even those that do not support CalDAV. The ExportICS method will create the exact same data as the PutCalendarEvent method sends when adding or updating an event to a calendar.

Note that if ExportICS is called immediately after a successful GetCalendarEvent, the unmodified calendar returned from the CalDAV server will be returned. However if any properties are changed between the GetCalendarEvent and ExportICS calls, the component will generate and return a brand new event.

The following properties are used when creating a request with PutCalendarEvent or ExportICS, and will be filled after calling GetCalendarEvent or ImportICS. These will also be available from inside the EventDetails event, which is fired for each event received from the CalDAV server in response to a GetCalendarReport.

• Alarms
• Attendees
• Categories
• Classification
• Completed
• Created
• CustomProperties
• Depth
• Description
• DisplayName
• Duration
• EndDate
• EventType
• LastModified
• Location
• Organizer
• Priority
• Recurrence
• Sequence
• StartDate
• Status
• Summary
• Timestamp
• Timezone
• Transparency
• UID
• URL

GetCalendarEvent Method (CalDAV Component)

Retrieves a single event from the CalDAV server.

Syntax

void __fastcall GetCalendarEvent(String ResourceURI);

Remarks

This method retrieves a single event from a CalDAV server. The ResourceURI points to the exact location of the iCal (*.ics) file you wish to retrieve. (If you do not know the URL of the event you need, you can use the GetCalendarReport method along with the ReportFilter property to find it.)

The event will be fetched using the WebDAV GET method. The full response is delivered through the Transfer event and the HTTP response headers through the Header event. After an event is retrieved with this method, the component parses the calendar data into properties. You may then edit these properties and use PutCalendarEvent to update the calendar event resource.

The following properties are used when creating a request with PutCalendarEvent or ExportICS, and will be filled after calling GetCalendarEvent or ImportICS. These will also be available from inside the EventDetails event, which is fired for each event received from the CalDAV server in response to a GetCalendarReport.

• Alarms
• Attendees
• Categories
• Classification
• Completed
• Created
• CustomProperties
• Depth
• Description
• DisplayName
• Duration
• EndDate
• EventType
• LastModified
• Location
• Organizer
• Priority
• Recurrence
• Sequence
• StartDate
• Status
• Summary
• Timestamp
• Timezone
• Transparency
• UID
• URL

There is no standard format for resource URIs. Google for instance, uses "https://www.google.com/calendar/dav/" plus your email address to access the default calendar. So "https://www.google.com/calendar/dav/username@gmail.com/" is the base URI for the default calendar. If you have multiple calendars, replace the email address portion above with the Id of the calendar, plus "@group.calendar.google.com/". For instance: "https://www.google.com/calendar/dav/ev3nkr4ua83jej7q32oumn5eeo@group.calendar.google.com/". For Google, calendar events are stored in the "/events/" path. To retrieve a report on a calendar, you'd add "/events/" to one of the above paths. For example: CalDAV.GetCalendarReport("https://www.google.com/calendar/dav/username@gmail.com/events/"); Leaving the "/events/" out of the URI will result in an HTTP protocol error: 405 Method not allowed.

To add or retrieve an event, add the UID of the event you're creating or retrieving plus ".ics" to the path. Note that when putting an event with the PutCalendarEvent method, if the resourceURI and the UID do not match Google will create the event using the UID stored in the UID property. The actual location of will be newly added event will be returned in a "Location" header. This is the resource URI you must use to retrieve the event with GetCalendarEvent. For example: CalDAV.UID = "1234567890"; CalDAV.PutCalendarEvent("https://www.google.com/calendar/dav/username@gmail.com/events/1234567890.ics");

Yahoo uses a different format for CalDAV access. Yahoo's ResourceURIs always start with "https://caldav.calendar.yahoo.com/dav/" plus your user name, plus "/Calendar/" plus the name of your calendar. For instance: "https://caldav.calendar.yahoo.com/dav/username/Calendar/Your_Name" for the default calendar. (Yahoo uses your name to create the default calendar). When using the CreateCalendar event to create a new calendar, replace "Your_Name" in the URI with the desired name of your new calendar. Event resources are located directly under the "/Calendar/Calendar_Name/" path. Like Google, the UID and filename portion of the resource URI must match, but Yahoo will actually return an HTTP protocol error if they differ. The examples below show a few possible transactions: CalDAVS1.User = "username"; CalDAVS1.Password = "password"; CalDAV.DisplayName = "My Hockey Calendar"; CalDAV.CreateCalendar("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/"); CalDAV.StartDate = "20100401T040000"; CalDAV.EndDate = "20100401T060000"; CalDAV.UID = "qwerty1234567"; CalDAV.Summary = "First Practice"; CalDAV.Location = "Rink on 1st and main"; CalDAV.EventType = vEvent; CalDAV.PutCalendarEvent("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/qwerty1234567.ics"); CalDAV.GetCalendarReport("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/");

GetCalendarOptions Method (CalDAV Component)

Retrieves options for the ResourceURI to determines whether it supports calendar access.

Syntax

void __fastcall GetCalendarOptions(String ResourceURI);

Remarks

This method sends an OPTIONS HTTP request to the indicated ResourceURI. The server will respond with an 200 OK HTTP message, and the supported options will fire one-by-one in the Header event. If a server supports CalDAV calendar access, the "DAV" header will contain the string "calendar-access". The allowable CalDAV and WebDAV methods may also be returned in the "Allow" header.

For instance, the following headers may be returned from a call to the GetCalendarOptions method:

There is no standard format for resource URIs. Google for instance, uses "https://www.google.com/calendar/dav/" plus your email address to access the default calendar. So "https://www.google.com/calendar/dav/username@gmail.com/" is the base URI for the default calendar. If you have multiple calendars, replace the email address portion above with the Id of the calendar, plus "@group.calendar.google.com/". For instance: "https://www.google.com/calendar/dav/ev3nkr4ua83jej7q32oumn5eeo@group.calendar.google.com/". For Google, calendar events are stored in the "/events/" path. To retrieve a report on a calendar, you'd add "/events/" to one of the above paths. For example: CalDAV.GetCalendarReport("https://www.google.com/calendar/dav/username@gmail.com/events/"); Leaving the "/events/" out of the URI will result in an HTTP protocol error: 405 Method not allowed.

To add or retrieve an event, add the UID of the event you're creating or retrieving plus ".ics" to the path. Note that when putting an event with the PutCalendarEvent method, if the resourceURI and the UID do not match Google will create the event using the UID stored in the UID property. The actual location of will be newly added event will be returned in a "Location" header. This is the resource URI you must use to retrieve the event with GetCalendarEvent. For example: CalDAV.UID = "1234567890"; CalDAV.PutCalendarEvent("https://www.google.com/calendar/dav/username@gmail.com/events/1234567890.ics");

Yahoo uses a different format for CalDAV access. Yahoo's ResourceURIs always start with "https://caldav.calendar.yahoo.com/dav/" plus your user name, plus "/Calendar/" plus the name of your calendar. For instance: "https://caldav.calendar.yahoo.com/dav/username/Calendar/Your_Name" for the default calendar. (Yahoo uses your name to create the default calendar). When using the CreateCalendar event to create a new calendar, replace "Your_Name" in the URI with the desired name of your new calendar. Event resources are located directly under the "/Calendar/Calendar_Name/" path. Like Google, the UID and filename portion of the resource URI must match, but Yahoo will actually return an HTTP protocol error if they differ. The examples below show a few possible transactions: CalDAVS1.User = "username"; CalDAVS1.Password = "password"; CalDAV.DisplayName = "My Hockey Calendar"; CalDAV.CreateCalendar("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/"); CalDAV.StartDate = "20100401T040000"; CalDAV.EndDate = "20100401T060000"; CalDAV.UID = "qwerty1234567"; CalDAV.Summary = "First Practice"; CalDAV.Location = "Rink on 1st and main"; CalDAV.EventType = vEvent; CalDAV.PutCalendarEvent("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/qwerty1234567.ics"); CalDAV.GetCalendarReport("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/");

GetCalendarReport Method (CalDAV Component)

Generates a report on the indicated calendar collection resource.

Syntax

void __fastcall GetCalendarReport(String ResourceURI);

Remarks

This method is used to send a calendar-query request to the calendar located at the specified ResourceURI. The ReportFilter can be used to filter out and return only the calendar events you wish to receive. The response to a calendar-query report will be parsed by the component, and information about the individual events contained within shall be fired in the EventDetails event.

The following properties are used when creating a request with PutCalendarEvent or ExportICS, and will be filled after calling GetCalendarEvent or ImportICS. These will also be available from inside the EventDetails event, which is fired for each event received from the CalDAV server in response to a GetCalendarReport.

• Alarms
• Attendees
• Categories
• Classification
• Completed
• Created
• CustomProperties
• Depth
• Description
• DisplayName
• Duration
• EndDate
• EventType
• LastModified
• Location
• Organizer
• Priority
• Recurrence
• Sequence
• StartDate
• Status
• Summary
• Timestamp
• Timezone
• Transparency
• UID
• URL

For example: CalDAV.User = "myusername" CalDAV.Password = "mypassword" CalDAV.ReportFilterStartDate = "20090101T000000Z" CalDAV.ReportFilterEndDate = "20091231T230000Z" CalDAV.GetCalendarReport "https://caldav.calendar.yahoo.com/dav/username/Calendar/default_calendar/" The following code inside the EventDetails event will print the start and end time as well as the summary for each event: Private Sub CalDAV_EventDetails(ResourceURI As String, STATUS As String, ETag As String, CalendarData As String) Debug.Print CalDAV.Summary & ": " & CalDAV.StartDate & " to " & CalDAV.EndDate End Sub The output from the above code will look something like this:

	Carolina Hurricanes vs. Colorado Avalanche: 20090222T150000 to 20090222T180000
	Lone Rider Brewery Tour: 20091107T124500 to 20091107T134500
	Salsa Dancing: 20090927T154500 to 20090927T181500
	Superbowl Party: 20090201T170000 to 20090202T000000
	Kathy's Birthday: 20090608T010000 to 20090608T020000
	Dinner at Shannon's: 20091001T183000 to 20091001T203000
	Carolina Rollergirls match: 20090411T170000 to 20090411T180000

There is no standard format for resource URIs. Google for instance, uses "https://www.google.com/calendar/dav/" plus your email address to access the default calendar. So "https://www.google.com/calendar/dav/username@gmail.com/" is the base URI for the default calendar. If you have multiple calendars, replace the email address portion above with the Id of the calendar, plus "@group.calendar.google.com/". For instance: "https://www.google.com/calendar/dav/ev3nkr4ua83jej7q32oumn5eeo@group.calendar.google.com/". For Google, calendar events are stored in the "/events/" path. To retrieve a report on a calendar, you'd add "/events/" to one of the above paths. For example: CalDAV.GetCalendarReport("https://www.google.com/calendar/dav/username@gmail.com/events/"); Leaving the "/events/" out of the URI will result in an HTTP protocol error: 405 Method not allowed.

To add or retrieve an event, add the UID of the event you're creating or retrieving plus ".ics" to the path. Note that when putting an event with the PutCalendarEvent method, if the resourceURI and the UID do not match Google will create the event using the UID stored in the UID property. The actual location of will be newly added event will be returned in a "Location" header. This is the resource URI you must use to retrieve the event with GetCalendarEvent. For example: CalDAV.UID = "1234567890"; CalDAV.PutCalendarEvent("https://www.google.com/calendar/dav/username@gmail.com/events/1234567890.ics");

Yahoo uses a different format for CalDAV access. Yahoo's ResourceURIs always start with "https://caldav.calendar.yahoo.com/dav/" plus your user name, plus "/Calendar/" plus the name of your calendar. For instance: "https://caldav.calendar.yahoo.com/dav/username/Calendar/Your_Name" for the default calendar. (Yahoo uses your name to create the default calendar). When using the CreateCalendar event to create a new calendar, replace "Your_Name" in the URI with the desired name of your new calendar. Event resources are located directly under the "/Calendar/Calendar_Name/" path. Like Google, the UID and filename portion of the resource URI must match, but Yahoo will actually return an HTTP protocol error if they differ. The examples below show a few possible transactions: CalDAVS1.User = "username"; CalDAVS1.Password = "password"; CalDAV.DisplayName = "My Hockey Calendar"; CalDAV.CreateCalendar("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/"); CalDAV.StartDate = "20100401T040000"; CalDAV.EndDate = "20100401T060000"; CalDAV.UID = "qwerty1234567"; CalDAV.Summary = "First Practice"; CalDAV.Location = "Rink on 1st and main"; CalDAV.EventType = vEvent; CalDAV.PutCalendarEvent("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/qwerty1234567.ics"); CalDAV.GetCalendarReport("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/");

GetFreeBusyReport Method (CalDAV Component)

Generates a report as to when the calendar owner is free and/or busy.

Syntax

void __fastcall GetFreeBusyReport(String ResourceURI);

Remarks

This method sends a free-busy-query request to the calendar at the specified ResourceURI. . The CalDAV server will return a list of FREEBUSY elements, which will be fired in the FreeBusy event and also stored in the FreeBusy collection. Each FREEBUSY element contains a type (BUSY, FREE, BUSY-TENTATIVE, etc.) and a date range.

Note that the ReportFilterStartDate property is required for a Free/Busy report. The ReportFilterEndDate property is optional. These are the only two ReportFilters used by the GetFreeBusyReport request, all other filters will be ignored.

Note that Google Calendar does not currently support Free/Busy reporting.

There is no standard format for resource URIs. Google for instance, uses "https://www.google.com/calendar/dav/" plus your email address to access the default calendar. So "https://www.google.com/calendar/dav/username@gmail.com/" is the base URI for the default calendar. If you have multiple calendars, replace the email address portion above with the Id of the calendar, plus "@group.calendar.google.com/". For instance: "https://www.google.com/calendar/dav/ev3nkr4ua83jej7q32oumn5eeo@group.calendar.google.com/". For Google, calendar events are stored in the "/events/" path. To retrieve a report on a calendar, you'd add "/events/" to one of the above paths. For example: CalDAV.GetCalendarReport("https://www.google.com/calendar/dav/username@gmail.com/events/"); Leaving the "/events/" out of the URI will result in an HTTP protocol error: 405 Method not allowed.

To add or retrieve an event, add the UID of the event you're creating or retrieving plus ".ics" to the path. Note that when putting an event with the PutCalendarEvent method, if the resourceURI and the UID do not match Google will create the event using the UID stored in the UID property. The actual location of will be newly added event will be returned in a "Location" header. This is the resource URI you must use to retrieve the event with GetCalendarEvent. For example: CalDAV.UID = "1234567890"; CalDAV.PutCalendarEvent("https://www.google.com/calendar/dav/username@gmail.com/events/1234567890.ics");

Yahoo uses a different format for CalDAV access. Yahoo's ResourceURIs always start with "https://caldav.calendar.yahoo.com/dav/" plus your user name, plus "/Calendar/" plus the name of your calendar. For instance: "https://caldav.calendar.yahoo.com/dav/username/Calendar/Your_Name" for the default calendar. (Yahoo uses your name to create the default calendar). When using the CreateCalendar event to create a new calendar, replace "Your_Name" in the URI with the desired name of your new calendar. Event resources are located directly under the "/Calendar/Calendar_Name/" path. Like Google, the UID and filename portion of the resource URI must match, but Yahoo will actually return an HTTP protocol error if they differ. The examples below show a few possible transactions: CalDAVS1.User = "username"; CalDAVS1.Password = "password"; CalDAV.DisplayName = "My Hockey Calendar"; CalDAV.CreateCalendar("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/"); CalDAV.StartDate = "20100401T040000"; CalDAV.EndDate = "20100401T060000"; CalDAV.UID = "qwerty1234567"; CalDAV.Summary = "First Practice"; CalDAV.Location = "Rink on 1st and main"; CalDAV.EventType = vEvent; CalDAV.PutCalendarEvent("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/qwerty1234567.ics"); CalDAV.GetCalendarReport("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/");

ImportICS Method (CalDAV Component)

Imports calendar data (contained in an ICS file) into the component's property list.

Syntax

void __fastcall ImportICS(String CalendarData);

Remarks

This method is used to load calendar data from an external source into the component. You may then submit this data with a call to PutCalendarEvent. If you edit any of the component properties between importing and calling PutCalendarEvent, the component will re-generate the PUT request itself. If no properties are changed, the imported data will be submitted unaltered when calling PutCalendarEvent.

As the calendar data is imported, the component will scan CalendarData for any calendar events. Each time a calendar event is discovered, the EventDetails event will fire, and the calendar event properties will be updated.

After ImportICS completes, the calendar event properties will be set to the most recent calendar event found in CalendarData.

Interrupt Method (CalDAV Component)

Interrupt the current method.

Syntax

void __fastcall Interrupt();

Remarks

If there is no method in progress, Interrupt simply returns, doing nothing.

LockCalendar Method (CalDAV Component)

Obtain a lock for a specified calendar resource.

Syntax

void __fastcall LockCalendar(String ResourceURI);

Remarks

This method will request a new lock to be placed on ResourceURI in the user's name so that only the user can operate on it. The method is linked to a number of properties that it uses to generate the lock request:

This method is associated with the Depth property. If Depth is set to "0", the component will lock only ResourceURI and its properties. If Depth is set to "infinity", the component will lock ResourceURI and its entire subtree.

If MoveCalendarEvent or CopyCalendarEvent are used to place a resource or collection in a location under a resource locked with "infinity", the new resource or collection will be added to the lock. Any lock on a collection will prevent non-lock owners from adding resources to that collection.

Note that while the Yahoo CalDAV server does accept LockCalendar and UnLockCalendar requests, the server does not respect resource locks (either on events or on the entire calendar). The Google CalDAV sever does not support either of these requests, and will respond with an HTTP protocol error: 405 Method Not Allowed. Also, neither Yahoo nor Google CalDAV servers support copying or moving calendar resources.

MoveCalendarEvent Method (CalDAV Component)

Moves one calendar resource to a new location.

Syntax

void __fastcall MoveCalendarEvent(String SourceResourceURI, String DestinationResourceURI);

Remarks

This method will move the resource indicated by SourceResourceURI to a new location under the resource indicated by DestinationResourceURI.

This method is associated with the Depth property. If Depth is set to "0", the component will move only SourceResourceURI. If Depth is set to "infinity", the component will move SourceResourceURI and its entire subtree to locations relative to it.

If the user has acquired a lock of infinite depth (via LockCalendar) on either DestinationResourceURI or any collection it is under, SourceResourceURI will be added to that lock.

Note that neither Yahoo nor Google CalDAV servers support locking, copying, or moving calendar resources.

There is no standard format for resource URIs. Google for instance, uses "https://www.google.com/calendar/dav/" plus your email address to access the default calendar. So "https://www.google.com/calendar/dav/username@gmail.com/" is the base URI for the default calendar. If you have multiple calendars, replace the email address portion above with the Id of the calendar, plus "@group.calendar.google.com/". For instance: "https://www.google.com/calendar/dav/ev3nkr4ua83jej7q32oumn5eeo@group.calendar.google.com/". For Google, calendar events are stored in the "/events/" path. To retrieve a report on a calendar, you'd add "/events/" to one of the above paths. For example: CalDAV.GetCalendarReport("https://www.google.com/calendar/dav/username@gmail.com/events/"); Leaving the "/events/" out of the URI will result in an HTTP protocol error: 405 Method not allowed.

To add or retrieve an event, add the UID of the event you're creating or retrieving plus ".ics" to the path. Note that when putting an event with the PutCalendarEvent method, if the resourceURI and the UID do not match Google will create the event using the UID stored in the UID property. The actual location of will be newly added event will be returned in a "Location" header. This is the resource URI you must use to retrieve the event with GetCalendarEvent. For example: CalDAV.UID = "1234567890"; CalDAV.PutCalendarEvent("https://www.google.com/calendar/dav/username@gmail.com/events/1234567890.ics");

Yahoo uses a different format for CalDAV access. Yahoo's ResourceURIs always start with "https://caldav.calendar.yahoo.com/dav/" plus your user name, plus "/Calendar/" plus the name of your calendar. For instance: "https://caldav.calendar.yahoo.com/dav/username/Calendar/Your_Name" for the default calendar. (Yahoo uses your name to create the default calendar). When using the CreateCalendar event to create a new calendar, replace "Your_Name" in the URI with the desired name of your new calendar. Event resources are located directly under the "/Calendar/Calendar_Name/" path. Like Google, the UID and filename portion of the resource URI must match, but Yahoo will actually return an HTTP protocol error if they differ. The examples below show a few possible transactions: CalDAVS1.User = "username"; CalDAVS1.Password = "password"; CalDAV.DisplayName = "My Hockey Calendar"; CalDAV.CreateCalendar("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/"); CalDAV.StartDate = "20100401T040000"; CalDAV.EndDate = "20100401T060000"; CalDAV.UID = "qwerty1234567"; CalDAV.Summary = "First Practice"; CalDAV.Location = "Rink on 1st and main"; CalDAV.EventType = vEvent; CalDAV.PutCalendarEvent("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/qwerty1234567.ics"); CalDAV.GetCalendarReport("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/");

PutCalendarEvent Method (CalDAV Component)

Adds a calendar resource at the specified ResourceURI using the CalDAV PUT method.

Syntax

void __fastcall PutCalendarEvent(String ResourceURI);

Remarks

This method adds a new event to the calendar collection at the specified ResourceURI. The ResourceURI must be a fully qualified URL to the location on the CalDAV server to which this event will be saved. If the ResourceURI already exists, the event at that URI will be overwritten.

NOTE: Some CalDAV servers (Yahoo for example) require that the UID and the filename portion of the URI match. For example, if the UID is "hello_world" then the ResourceURI parameter of the PutCalendarEvent should be "https://caldav.calendar.yahoo.com/dav/user_name/Calendar/My_Calendar/hello_world.ics". If the UID and filename portion of the URI do not match, the Yahoo CalDAV server will return a "302 Found" response indicating that the requested resource resides under a different URI. (Meaning the event was not added to the calendar)

The following properties are used when creating a request with PutCalendarEvent or ExportICS, and will be filled after calling GetCalendarEvent or ImportICS. These will also be available from inside the EventDetails event, which is fired for each event received from the CalDAV server in response to a GetCalendarReport.

• Alarms
• Attendees
• Categories
• Classification
• Completed
• Created
• CustomProperties
• Depth
• Description
• DisplayName
• Duration
• EndDate
• EventType
• LastModified
• Location
• Organizer
• Priority
• Recurrence
• Sequence
• StartDate
• Status
• Summary
• Timestamp
• Timezone
• Transparency
• UID
• URL

There is no standard format for resource URIs. Google for instance, uses "https://www.google.com/calendar/dav/" plus your email address to access the default calendar. So "https://www.google.com/calendar/dav/username@gmail.com/" is the base URI for the default calendar. If you have multiple calendars, replace the email address portion above with the Id of the calendar, plus "@group.calendar.google.com/". For instance: "https://www.google.com/calendar/dav/ev3nkr4ua83jej7q32oumn5eeo@group.calendar.google.com/". For Google, calendar events are stored in the "/events/" path. To retrieve a report on a calendar, you'd add "/events/" to one of the above paths. For example: CalDAV.GetCalendarReport("https://www.google.com/calendar/dav/username@gmail.com/events/"); Leaving the "/events/" out of the URI will result in an HTTP protocol error: 405 Method not allowed.

To add or retrieve an event, add the UID of the event you're creating or retrieving plus ".ics" to the path. Note that when putting an event with the PutCalendarEvent method, if the resourceURI and the UID do not match Google will create the event using the UID stored in the UID property. The actual location of will be newly added event will be returned in a "Location" header. This is the resource URI you must use to retrieve the event with GetCalendarEvent. For example: CalDAV.UID = "1234567890"; CalDAV.PutCalendarEvent("https://www.google.com/calendar/dav/username@gmail.com/events/1234567890.ics");

Yahoo uses a different format for CalDAV access. Yahoo's ResourceURIs always start with "https://caldav.calendar.yahoo.com/dav/" plus your user name, plus "/Calendar/" plus the name of your calendar. For instance: "https://caldav.calendar.yahoo.com/dav/username/Calendar/Your_Name" for the default calendar. (Yahoo uses your name to create the default calendar). When using the CreateCalendar event to create a new calendar, replace "Your_Name" in the URI with the desired name of your new calendar. Event resources are located directly under the "/Calendar/Calendar_Name/" path. Like Google, the UID and filename portion of the resource URI must match, but Yahoo will actually return an HTTP protocol error if they differ. The examples below show a few possible transactions: CalDAVS1.User = "username"; CalDAVS1.Password = "password"; CalDAV.DisplayName = "My Hockey Calendar"; CalDAV.CreateCalendar("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/"); CalDAV.StartDate = "20100401T040000"; CalDAV.EndDate = "20100401T060000"; CalDAV.UID = "qwerty1234567"; CalDAV.Summary = "First Practice"; CalDAV.Location = "Rink on 1st and main"; CalDAV.EventType = vEvent; CalDAV.PutCalendarEvent("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/qwerty1234567.ics"); CalDAV.GetCalendarReport("https://caldav.calendar.yahoo.com/dav/username/Calendar/Hockey_Calendar/");

Reset Method (CalDAV Component)

Reset the component.

Syntax

void __fastcall Reset();

Remarks

This method will reset the component's properties to their default values.

UnLockCalendar Method (CalDAV Component)

Unlocks a calendar resource.

Syntax

void __fastcall UnLockCalendar(String ResourceURI);

Remarks

This method unlocks a calendar resource. Before calling UnLockCalendar on a particular calendar resource, the LockTokens property must be set to the lock tokens for ResourceURI. The method will remove the lock, allowing other users or non-privileged users to access and operate on the file.

Connected Event (CalDAV Component)

This event is fired immediately after a connection completes (or fails).

Syntax

typedef struct {
  int StatusCode;
  String Description;
} TipwCalDAVConnectedEventParams;
typedef void __fastcall (__closure *TipwCalDAVConnectedEvent)(System::TObject* Sender, TipwCalDAVConnectedEventParams *e);
__property TipwCalDAVConnectedEvent OnConnected = { read=FOnConnected, write=FOnConnected };

Remarks

If the connection is made normally, StatusCode is 0 and Description is "OK".

If the connection fails, StatusCode has the error code returned by the Transmission Control Protocol (TCP)/IP stack. Description contains a description of this code. The value of StatusCode is equal to the value of the error.

Please refer to the Error Codes section for more information.

ConnectionStatus Event (CalDAV Component)

This event is fired to indicate changes in the connection state.

Syntax

typedef struct {
  String ConnectionEvent;
  int StatusCode;
  String Description;
} TipwCalDAVConnectionStatusEventParams;
typedef void __fastcall (__closure *TipwCalDAVConnectionStatusEvent)(System::TObject* Sender, TipwCalDAVConnectionStatusEventParams *e);
__property TipwCalDAVConnectionStatusEvent OnConnectionStatus = { read=FOnConnectionStatus, write=FOnConnectionStatus };

Remarks

The ConnectionStatus event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.

The ConnectionEvent parameter indicates the type of connection event. Values may include the following:

Disconnected Event (CalDAV Component)

This event is fired when a connection is closed.

Syntax

typedef struct {
  int StatusCode;
  String Description;
} TipwCalDAVDisconnectedEventParams;
typedef void __fastcall (__closure *TipwCalDAVDisconnectedEvent)(System::TObject* Sender, TipwCalDAVDisconnectedEventParams *e);
__property TipwCalDAVDisconnectedEvent OnDisconnected = { read=FOnDisconnected, write=FOnDisconnected };

Remarks

If the connection is broken normally, StatusCode is 0 and Description is "OK".

If the connection is broken for any other reason, StatusCode has the error code returned by the Transmission Control Protocol (TCP/IP) subsystem. Description contains a description of this code. The value of StatusCode is equal to the value of the TCP/IP error.

Please refer to the Error Codes section for more information.

EndTransfer Event (CalDAV Component)

Fired when a document finishes transferring.

Syntax

typedef struct {
  int Direction;
} TipwCalDAVEndTransferEventParams;
typedef void __fastcall (__closure *TipwCalDAVEndTransferEvent)(System::TObject* Sender, TipwCalDAVEndTransferEventParams *e);
__property TipwCalDAVEndTransferEvent OnEndTransfer = { read=FOnEndTransfer, write=FOnEndTransfer };

Remarks

The EndTransfer event is fired when the document text finishes transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Error Event (CalDAV Component)

Information about errors during data delivery.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TipwCalDAVErrorEventParams;
typedef void __fastcall (__closure *TipwCalDAVErrorEvent)(System::TObject* Sender, TipwCalDAVErrorEventParams *e);
__property TipwCalDAVErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The Error event is fired in case of exceptional conditions during message processing. Normally the component raises an exception.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.

EventDetails Event (CalDAV Component)

Fires for each calendar event received.

Syntax

typedef struct {
  String ResourceURI;
  String ResponseStatus;
  String ETag;
  String CalendarData;
} TipwCalDAVEventDetailsEventParams;
typedef void __fastcall (__closure *TipwCalDAVEventDetailsEvent)(System::TObject* Sender, TipwCalDAVEventDetailsEventParams *e);
__property TipwCalDAVEventDetailsEvent OnEventDetails = { read=FOnEventDetails, write=FOnEventDetails };

Remarks

This event fires for each VEVENT, VTODO, VJOURNAL, or VFREEBUSY event received in response to a GetCalendarReport request. The ResourceURI parameter indicates the location of this particular event on the CalDAV server, and the ETag parameter is used to indicate the current state of the calendar event. If the ETag is different from the value you have cached for the current ResourceURI, it means the event has changed on the server since the last time you updated your cache. ResponseStatus indicates the HTTP status of CalDAV server received when attempting to retrieve this particular ResourceURI when it was building the report. The CalendarData parameter contains the raw calendar entry as returned by the CalDAV server. This data is also parsed into the following properties, and are valid for the current ResourceURI only inside this event.

• Alarms
• Attendees
• Categories
• Classification
• Completed
• Created
• CustomProperties
• Depth
• Description
• DisplayName
• Duration
• EndDate
• EventType
• LastModified
• Location
• Organizer
• Priority
• Recurrence
• Sequence
• StartDate
• Status
• Summary
• Timestamp
• Timezone
• Transparency
• UID
• URL

Note that for a large calendar you may not wish to return the full contents of each calendar event, as this could be a substantially large amount of data. In this case, set the ReportFilterReturnCalendarData property to false, and only the ResourceURI, ResponseStatus, and ETag parameters will be returned by the CalDAV server for each calendar event. The contents of the event will not be returned, and the CalendarData parameter will be empty.

*The ResourceURI and the URL property are not the same. The URL property is an iCal field, and the ResourceURI is the actual location of the resource on the CalDAV server. Some CalDAV servers may force the URL to match the ResourceURI, but the URL should be treated as a separate user-defined entity by the user, and it should not be expected to match the ResourceURI. Likewise, ResponseStatus and Status are not the same. Status is the status of the event (TENTATIVE, CONFIRMED, CANCELLED, etc). ResponseStatus is the HTTP status received when the CalDAV server attempted to retrieve the current event when constructing a report.

FreeBusy Event (CalDAV Component)

Fires for each Free/Busy element received in the response.

Syntax

typedef struct {
  String BusyType;
  String BusyRange;
} TipwCalDAVFreeBusyEventParams;
typedef void __fastcall (__closure *TipwCalDAVFreeBusyEvent)(System::TObject* Sender, TipwCalDAVFreeBusyEventParams *e);
__property TipwCalDAVFreeBusyEvent OnFreeBusy = { read=FOnFreeBusy, write=FOnFreeBusy };

Remarks

This event fires for each FREEBUSY element received in response to a GetFreeBusyReport request. The FBTYPE will be contained in the BusyType parameter, and the FREEBUSY value itself will be contained in the BusyRange parameter. The Free/Busy information will also be stored in the FreeBusy collection.

Header Event (CalDAV Component)

This event is fired every time a header line comes in.

Syntax

typedef struct {
  String Field;
  String Value;
} TipwCalDAVHeaderEventParams;
typedef void __fastcall (__closure *TipwCalDAVHeaderEvent)(System::TObject* Sender, TipwCalDAVHeaderEventParams *e);
__property TipwCalDAVHeaderEvent OnHeader = { read=FOnHeader, write=FOnHeader };

Remarks

The Field parameter contains the name of the HTTP header (which is the same as it is delivered). The Value parameter contains the header contents.

If the header line being retrieved is a continuation header line, then the Field parameter contains "" (empty string).

Log Event (CalDAV Component)

This event fires once for each log message.

Syntax

typedef struct {
  int LogLevel;
  String Message;
  String LogType;
} TipwCalDAVLogEventParams;
typedef void __fastcall (__closure *TipwCalDAVLogEvent)(System::TObject* Sender, TipwCalDAVLogEventParams *e);
__property TipwCalDAVLogEvent OnLog = { read=FOnLog, write=FOnLog };

Remarks

This event fires once for each log message generated by the component. The verbosity is controlled by the LogLevel setting.

LogLevel indicates the level of message. Possible values are as follows:

The value 1 (Info) logs basic information, including the URL, HTTP version, and status details.

The value 2 (Verbose) logs additional information about the request and response.

The value 3 (Debug) logs the headers and body for both the request and response, as well as additional debug information (if any).

Message is the log entry.

LogType identifies the type of log entry. Possible values are as follows:

• "Info"
• "RequestHeaders"
• "ResponseHeaders"
• "RequestBody"
• "ResponseBody"
• "ProxyRequest"
• "ProxyResponse"
• "FirewallRequest"
• "FirewallResponse"

Redirect Event (CalDAV Component)

This event is fired when a redirection is received from the server.

Syntax

typedef struct {
  String Location;
  bool Accept;
} TipwCalDAVRedirectEventParams;
typedef void __fastcall (__closure *TipwCalDAVRedirectEvent)(System::TObject* Sender, TipwCalDAVRedirectEventParams *e);
__property TipwCalDAVRedirectEvent OnRedirect = { read=FOnRedirect, write=FOnRedirect };

Remarks

This event is fired in cases in which the client can decide whether or not to continue with the redirection process. The Accept parameter is always True by default, but if you do not want to follow the redirection, Accept may be set to False, in which case the component raises an exception. Location is the location to which the client is being redirected. Further control over redirection is provided in the FollowRedirects property.

SetCookie Event (CalDAV Component)

This event is fired for every cookie set by the server.

Syntax

typedef struct {
  String Name;
  String Value;
  String Expires;
  String Domain;
  String Path;
  bool Secure;
} TipwCalDAVSetCookieEventParams;
typedef void __fastcall (__closure *TipwCalDAVSetCookieEvent)(System::TObject* Sender, TipwCalDAVSetCookieEventParams *e);
__property TipwCalDAVSetCookieEvent OnSetCookie = { read=FOnSetCookie, write=FOnSetCookie };

Remarks

The SetCookie event is fired for every Set-Cookie: header received from the HTTP server.

The Name parameter contains the name of the cookie, with the corresponding value supplied in the Value parameter.

The Expires parameter contains an expiration time for the cookie (if provided by the server). The time format used is "Weekday, DD-Mon-YY HH:MM:SS GMT". If the server does not provide an expiration time, the Expires parameter will be an empty string. In this case, the convention is to drop the cookie at the end of the session.

The Domain parameter contains a domain name to limit the cookie to (if provided by the server). If the server does not provide a domain name, the Domain parameter will be an empty string. The convention in this case is to use the server specified in the URL (URLServer) as the cookie domain.

The Path parameter contains a path name to limit the cookie to (if provided by the server). If the server does not provide a cookie path, the Path parameter will be an empty string. The convention in this case is to use the path specified in the URL (URLPath) as the cookie path.

The Secure parameter specifies whether the cookie is secure. If the value of this parameter is True, the cookie value must be submitted only through a secure (HTTPS) connection.

SSLServerAuthentication Event (CalDAV Component)

Fired after the server presents its certificate to the client.

Syntax

typedef struct {
  String CertEncoded;
  DynamicArray<Byte> CertEncodedB;
  String CertSubject;
  String CertIssuer;
  String Status;
  bool Accept;
} TipwCalDAVSSLServerAuthenticationEventParams;
typedef void __fastcall (__closure *TipwCalDAVSSLServerAuthenticationEvent)(System::TObject* Sender, TipwCalDAVSSLServerAuthenticationEventParams *e);
__property TipwCalDAVSSLServerAuthenticationEvent OnSSLServerAuthentication = { read=FOnSSLServerAuthentication, write=FOnSSLServerAuthentication };

Remarks

This event is where the client can decide whether to continue with the connection process or not. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether to continue or not.

When Accept is False, Status shows why the verification failed (otherwise, Status contains the string "OK"). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.

SSLStatus Event (CalDAV Component)

Shows the progress of the secure connection.

Syntax

typedef struct {
  String Message;
} TipwCalDAVSSLStatusEventParams;
typedef void __fastcall (__closure *TipwCalDAVSSLStatusEvent)(System::TObject* Sender, TipwCalDAVSSLStatusEventParams *e);
__property TipwCalDAVSSLStatusEvent OnSSLStatus = { read=FOnSSLStatus, write=FOnSSLStatus };

Remarks

The event is fired for informational and logging purposes only. Used to track the progress of the connection.

StartTransfer Event (CalDAV Component)

Fired when a document starts transferring (after the headers).

Syntax

typedef struct {
  int Direction;
} TipwCalDAVStartTransferEventParams;
typedef void __fastcall (__closure *TipwCalDAVStartTransferEvent)(System::TObject* Sender, TipwCalDAVStartTransferEventParams *e);
__property TipwCalDAVStartTransferEvent OnStartTransfer = { read=FOnStartTransfer, write=FOnStartTransfer };

Remarks

The StartTransfer event is fired when the document text starts transferring from the server to the local host.

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

Status Event (CalDAV Component)

This event is fired when the HTTP status line is received from the server.

Syntax

typedef struct {
  String HTTPVersion;
  int StatusCode;
  String Description;
} TipwCalDAVStatusEventParams;
typedef void __fastcall (__closure *TipwCalDAVStatusEvent)(System::TObject* Sender, TipwCalDAVStatusEventParams *e);
__property TipwCalDAVStatusEvent OnStatus = { read=FOnStatus, write=FOnStatus };

Remarks

HTTPVersion is a string containing the HTTP version string as returned from the server (e.g., "1.1").

StatusCode contains the HTTP status code (e.g., 200), and Description the associated message returned by the server (e.g., "OK").

Transfer Event (CalDAV Component)

This event is fired while a document transfers (delivers document).

Syntax

typedef struct {
  int Direction;
  __int64 BytesTransferred;
  int PercentDone;
  String Text;
  DynamicArray<Byte> TextB;
} TipwCalDAVTransferEventParams;
typedef void __fastcall (__closure *TipwCalDAVTransferEvent)(System::TObject* Sender, TipwCalDAVTransferEventParams *e);
__property TipwCalDAVTransferEvent OnTransfer = { read=FOnTransfer, write=FOnTransfer };

Remarks

The Text parameter contains the portion of the document text being received. It is empty if data are being posted to the server.

The BytesTransferred parameter contains the number of bytes transferred in this Direction since the beginning of the document text (excluding HTTP response headers).

The Direction parameter shows whether the client (0) or the server (1) is sending the data.

The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.

Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.

Config Settings (CalDAV Component)

CalDAV Config Settings

WebDAV Config Settings

HTTP Config Settings

TCPClient Config Settings

SSL Config Settings

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

-----BEGIN CERTIFICATE-----
MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw
...
eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w
F0I1XhM+pKj7FjDr+XNj
-----END CERTIFICATE-----
\r \n
-----BEGIN CERTIFICATE-----
MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp
..
d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA
-----END CERTIFICATE-----

Socket Config Settings

Base Config Settings

Trappable Errors (CalDAV Component)

CalDAV Errors

The component may also return one of the following error codes, which are inherited from other components.

HTTP Errors

The component may also return one of the following error codes, which are inherited from other components.

TCPClient Errors

SSL Errors

TCP/IP Errors