FileMailer Class
Properties Methods Events Config Settings Errors
The FileMailer Class is used to send emails with file attachments.
Syntax
class ipworks.FileMailer
Remarks
The FileMailer Class supports both plaintext and Secure Sockets Layer/Transport Layer Security (SSL/TLS) connections (RFC 2487). When connecting over Secure Sockets Layer/Transport Layer Security (SSL/TLS) the on_ssl_server_authentication event allows you to check the server identity and other security attributes. The on_ssl_status event provides information about the SSL handshake. Additional SSL-related settings are also supported through the config method.
The class sends a message (provided in message_text) and one or more file attachments specified in the attachments properties.
The recipients are specified by the send_to, cc, and b_cc properties, and the message subject is specified by the subject property.
After all of the appropriate properties have been set, call the send method and your message will be sent to its intended recipients.
Other SMTP headers may be specified through the other_headers property. Information about interaction with the server is provided through the on_pi_trail event.
Property List
The following is the full list of the properties of the class with short descriptions. Click on the links for further details.
attachment_count | The number of records in the Attachment arrays. |
attachment_data | The raw data for the attachment that will be sent with your message. |
attachment_file_name | This property contains the path of a file on your system to be sent as an attachment with your message. |
attachment_name | This property contains the name of the attachment to be sent. |
auth_mechanism | This property is used when connecting to the mail server. |
b_cc | This property includes a comma-separated list of addresses for blind carbon copies (optional). |
cc | This property includes a comma-separated list of addresses for carbon copies (optional). |
connected | This property shows whether the class is connected. |
delivery_notification_to | This property includes the email address to which to send a delivery notification. |
firewall_auto_detect | This property tells the class whether or not to automatically detect and use firewall system settings, if available. |
firewall_type | This property determines the type of firewall to connect through. |
firewall_host | This property contains the name or IP address of the firewall (optional). |
firewall_password | This property contains a password if authentication is to be used when connecting through the firewall. |
firewall_port | This property contains the Transmission Control Protocol (TCP) port for the firewall Host . |
firewall_user | This property contains a username if authentication is to be used when connecting through a firewall. |
from_ | This property includes the email address of the sender (required). |
idle | This property specifies the current status of the class. |
importance | This property indicates the importance of the mail message (optional). |
last_reply | This property indicates the last reply received from the server. |
local_host | This property includes the name of the local host or user-assigned IP interface through which connections are initiated or accepted. |
mail_port | This property includes the server port for SMTP (default 25). |
mail_server | This property includes the name or address of a mail server (mail relay). |
message_date | This property includes the date of the mail message (optional). |
message_id | This property includes the message identifier for the message. |
message_recipient_count | The number of records in the MessageRecipient arrays. |
message_recipient_address | This property contains the email address of the recipient. |
message_recipient_name | This property contains the name of the recipient. |
message_recipient_options | This property contains the recipient sending options (used only by SMTP). |
message_recipient_type | This property contains the recipient type: To, Cc, or Bcc. |
message_text | This is the full text of the message to send (without headers). |
other_headers | This property includes an RFC 822-compliant string consisting of extra headers. |
password | This property includes a password for logon to the MailServer . |
priority | This property includes the priority of the mail message (optional). |
read_receipt_to | This property includes the email address to send a read-receipt to. |
reply_to | This property includes a mail address to which to reply (optional). |
send_to | This property includes a comma-separated list of addresses for destinations (required). |
sensitivity | This property indicates the sensitivity of the mail message (optional). |
ssl_accept_server_cert_effective_date | This is the date on which this certificate becomes valid. |
ssl_accept_server_cert_expiration_date | This is the date the certificate expires. |
ssl_accept_server_cert_extended_key_usage | This is a comma-delimited list of extended key usage identifiers. |
ssl_accept_server_cert_fingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
ssl_accept_server_cert_fingerprint_sha1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
ssl_accept_server_cert_fingerprint_sha256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
ssl_accept_server_cert_issuer | This is the issuer of the certificate. |
ssl_accept_server_cert_private_key | This is the private key of the certificate (if available). |
ssl_accept_server_cert_private_key_available | This property shows whether a PrivateKey is available for the selected certificate. |
ssl_accept_server_cert_private_key_container | This is the name of the PrivateKey container for the certificate (if available). |
ssl_accept_server_cert_public_key | This is the public key of the certificate. |
ssl_accept_server_cert_public_key_algorithm | This property contains the textual description of the certificate's public key algorithm. |
ssl_accept_server_cert_public_key_length | This is the length of the certificate's public key (in bits). |
ssl_accept_server_cert_serial_number | This is the serial number of the certificate encoded as a string. |
ssl_accept_server_cert_signature_algorithm | The property contains the text description of the certificate's signature algorithm. |
ssl_accept_server_cert_store | This is the name of the certificate store for the client certificate. |
ssl_accept_server_cert_store_password | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
ssl_accept_server_cert_store_type | This is the type of certificate store for this certificate. |
ssl_accept_server_cert_subject_alt_names | This property contains comma-separated lists of alternative subject names for the certificate. |
ssl_accept_server_cert_thumbprint_md5 | This property contains the MD5 hash of the certificate. |
ssl_accept_server_cert_thumbprint_sha1 | This property contains the SHA-1 hash of the certificate. |
ssl_accept_server_cert_thumbprint_sha256 | This property contains the SHA-256 hash of the certificate. |
ssl_accept_server_cert_usage | This property contains the text description of UsageFlags . |
ssl_accept_server_cert_usage_flags | This property contains the flags that show intended use for the certificate. |
ssl_accept_server_cert_version | This property contains the certificate's version number. |
ssl_accept_server_cert_subject | This is the subject of the certificate used for client authentication. |
ssl_accept_server_cert_encoded | This is the certificate (PEM/Base64 encoded). |
ssl_cert_effective_date | This is the date on which this certificate becomes valid. |
ssl_cert_expiration_date | This is the date the certificate expires. |
ssl_cert_extended_key_usage | This is a comma-delimited list of extended key usage identifiers. |
ssl_cert_fingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
ssl_cert_fingerprint_sha1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
ssl_cert_fingerprint_sha256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
ssl_cert_issuer | This is the issuer of the certificate. |
ssl_cert_private_key | This is the private key of the certificate (if available). |
ssl_cert_private_key_available | This property shows whether a PrivateKey is available for the selected certificate. |
ssl_cert_private_key_container | This is the name of the PrivateKey container for the certificate (if available). |
ssl_cert_public_key | This is the public key of the certificate. |
ssl_cert_public_key_algorithm | This property contains the textual description of the certificate's public key algorithm. |
ssl_cert_public_key_length | This is the length of the certificate's public key (in bits). |
ssl_cert_serial_number | This is the serial number of the certificate encoded as a string. |
ssl_cert_signature_algorithm | The property contains the text description of the certificate's signature algorithm. |
ssl_cert_store | This is the name of the certificate store for the client certificate. |
ssl_cert_store_password | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
ssl_cert_store_type | This is the type of certificate store for this certificate. |
ssl_cert_subject_alt_names | This property contains comma-separated lists of alternative subject names for the certificate. |
ssl_cert_thumbprint_md5 | This property contains the MD5 hash of the certificate. |
ssl_cert_thumbprint_sha1 | This property contains the SHA-1 hash of the certificate. |
ssl_cert_thumbprint_sha256 | This property contains the SHA-256 hash of the certificate. |
ssl_cert_usage | This property contains the text description of UsageFlags . |
ssl_cert_usage_flags | This property contains the flags that show intended use for the certificate. |
ssl_cert_version | This property contains the certificate's version number. |
ssl_cert_subject | This is the subject of the certificate used for client authentication. |
ssl_cert_encoded | This is the certificate (PEM/Base64 encoded). |
ssl_enabled | This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled. |
ssl_provider | This property specifies the Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use. |
ssl_server_cert_effective_date | This is the date on which this certificate becomes valid. |
ssl_server_cert_expiration_date | This is the date the certificate expires. |
ssl_server_cert_extended_key_usage | This is a comma-delimited list of extended key usage identifiers. |
ssl_server_cert_fingerprint | This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. |
ssl_server_cert_fingerprint_sha1 | This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. |
ssl_server_cert_fingerprint_sha256 | This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. |
ssl_server_cert_issuer | This is the issuer of the certificate. |
ssl_server_cert_private_key | This is the private key of the certificate (if available). |
ssl_server_cert_private_key_available | This property shows whether a PrivateKey is available for the selected certificate. |
ssl_server_cert_private_key_container | This is the name of the PrivateKey container for the certificate (if available). |
ssl_server_cert_public_key | This is the public key of the certificate. |
ssl_server_cert_public_key_algorithm | This property contains the textual description of the certificate's public key algorithm. |
ssl_server_cert_public_key_length | This is the length of the certificate's public key (in bits). |
ssl_server_cert_serial_number | This is the serial number of the certificate encoded as a string. |
ssl_server_cert_signature_algorithm | The property contains the text description of the certificate's signature algorithm. |
ssl_server_cert_store | This is the name of the certificate store for the client certificate. |
ssl_server_cert_store_password | If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store. |
ssl_server_cert_store_type | This is the type of certificate store for this certificate. |
ssl_server_cert_subject_alt_names | This property contains comma-separated lists of alternative subject names for the certificate. |
ssl_server_cert_thumbprint_md5 | This property contains the MD5 hash of the certificate. |
ssl_server_cert_thumbprint_sha1 | This property contains the SHA-1 hash of the certificate. |
ssl_server_cert_thumbprint_sha256 | This property contains the SHA-256 hash of the certificate. |
ssl_server_cert_usage | This property contains the text description of UsageFlags . |
ssl_server_cert_usage_flags | This property contains the flags that show intended use for the certificate. |
ssl_server_cert_version | This property contains the certificate's version number. |
ssl_server_cert_subject | This is the subject of the certificate used for client authentication. |
ssl_server_cert_encoded | This is the certificate (PEM/Base64 encoded). |
ssl_start_mode | This property determines how the class starts the Secure Sockets Layer (SSL) negotiation. |
subject | This property includes the subject of the mail message (optional). |
timeout | This property includes the timeout for the class. |
user | This property includes the user identifier needed to log in as in the MailServer . |
Method List
The following is the full list of the methods of the class with short descriptions. Click on the links for further details.
add_attachment | This adds FileName as an attachment. |
config | Sets or retrieves a configuration setting. |
connect | This method connects to the mail relay and sends the SMTP HELO command. |
disconnect | This method disconnects from the SMTP server. |
do_events | This method processes events from the internal message queue. |
interrupt | This method interrupts the current method. |
process_queue | This method sends the messages that previously have been queued into QueueDir . |
queue | This method queues the message into QueueDir . |
reset | This method will reset the class. |
reset_headers | This method resets all the message headers to empty. |
send | This sends the current message and the MIME-encoded attachment. |
send_command | This method sends the exact command directly to the server. |
Event List
The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.
on_connection_status | This event is fired to indicate changes in the connection state. |
on_end_transfer | This event is fired when the message text completes transferring. |
on_error | Fired when information is available about errors during data delivery. |
on_pi_trail | This event traces the commands sent to the mail server, and the respective replies. |
on_ssl_server_authentication | Fired after the server presents its certificate to the client. |
on_ssl_status | Fired when secure connection progress messages are available. |
on_start_transfer | This event is fired when the message text starts transferring. |
on_transfer | This event is fired when the message text is transferred to MailServer . |
Config Settings
The following is a list of config settings for the class with short descriptions. Click on the links for further details.
AttachmentEncoding[index] | Content-Transfer-Encoding for attached file (at index). |
AttachmentText[index] | Add the text into the attachment at the specified index. |
AttachmentType[index] | Content-type for attached file (at index). |
Charset | When set, the charset Content-Type attribute will be added using the specified value. |
MessageTextEncoding | When set, the MessageText value will be encoded using the specified encoding. |
OverrideFileName | If set to true, the AttachmentName property value will be used to set the MIME part FileName attribute. |
TempFilePath | If set, the temporary files created during message creation will be put in the path specified. |
AllowEmptyTo | If set to True, then the SendTo property is not required. |
AuthorizationIdentity | The value to use as the authorization identity when SASL authentication is used. |
Charset | When set, the message headers will be encoded using the specified Charset. |
Hello | The argument for HELO (herald) command to the server (defaults to local host name). |
KeepQueue | If set to True, queued files are not deleted after a successful send. |
MaxHeaderLength | Maximum length for headers to avoid line folding (default 80). |
MessageHeadersString | String representation of RFC822-encoded headers of the message. |
MessageIdAlgorithm | Determines the algorithm used to hash the random MessageId. |
OtherHeaders | An RFC 822 compliant string consisting of extra headers. |
ReturnPath | Sets the Return-Path to be used for sending email. |
SendRSET | Whether to send RSET command. |
StopOnBccErrors | Instructs the class to stop sending the message if the server does not acknowledge any of the BCCs. |
StopOnCcErrors | Instructs the class to stop sending the message if the server does not acknowledge any of the CCs. |
StopOnToErrors | Instructs the class to stop sending the message if the server does not acknowledge any of the TOs. |
TransferText | String representation of RFC822-encoded body of the message. |
ConnectionTimeout | Sets a separate timeout value for establishing a connection. |
FirewallAutoDetect | Tells the class whether or not to automatically detect and use firewall system settings, if available. |
FirewallHost | Name or IP address of firewall (optional). |
FirewallPassword | Password to be used if authentication is to be used when connecting through the firewall. |
FirewallPort | The TCP port for the FirewallHost;. |
FirewallType | Determines the type of firewall to connect through. |
FirewallUser | A user name if authentication is to be used connecting through a firewall. |
KeepAliveInterval | The retry interval, in milliseconds, to be used when a TCP keep-alive packet is sent and no response is received. |
KeepAliveTime | The inactivity time in milliseconds before a TCP keep-alive packet is sent. |
Linger | When set to True, connections are terminated gracefully. |
LingerTime | Time in seconds to have the connection linger. |
LocalHost | The name of the local host through which connections are initiated or accepted. |
LocalPort | The port in the local host where the class binds. |
MaxLineLength | The maximum amount of data to accumulate when no EOL is found. |
MaxTransferRate | The transfer rate limit in bytes per second. |
ProxyExceptionsList | A semicolon separated list of hosts and IPs to bypass when using a proxy. |
TCPKeepAlive | Determines whether or not the keep alive socket option is enabled. |
TcpNoDelay | Whether or not to delay when sending packets. |
UseIPv6 | Whether to use IPv6. |
LogSSLPackets | Controls whether SSL packets are logged when using the internal security API. |
OpenSSLCADir | The path to a directory containing CA certificates. |
OpenSSLCAFile | Name of the file containing the list of CA's trusted by your application. |
OpenSSLCipherList | A string that controls the ciphers to be used by SSL. |
OpenSSLPrngSeedData | The data to seed the pseudo random number generator (PRNG). |
ReuseSSLSession | Determines if the SSL session is reused. |
SSLCACertFilePaths | The paths to CA certificate files on Unix/Linux. |
SSLCACerts | A newline separated list of CA certificate to be included when performing an SSL handshake. |
SSLCheckCRL | Whether to check the Certificate Revocation List for the server certificate. |
SSLCheckOCSP | Whether to use OCSP to check the status of the server certificate. |
SSLCipherStrength | The minimum cipher strength used for bulk encryption. |
SSLClientCACerts | A newline separated list of CA certificates to use during SSL client certificate validation. |
SSLEnabledCipherSuites | The cipher suite to be used in an SSL negotiation. |
SSLEnabledProtocols | Used to enable/disable the supported security protocols. |
SSLEnableRenegotiation | Whether the renegotiation_info SSL extension is supported. |
SSLIncludeCertChain | Whether the entire certificate chain is included in the SSLServerAuthentication event. |
SSLKeyLogFile | The location of a file where per-session secrets are written for debugging purposes. |
SSLNegotiatedCipher | Returns the negotiated cipher suite. |
SSLNegotiatedCipherStrength | Returns the negotiated cipher suite strength. |
SSLNegotiatedCipherSuite | Returns the negotiated cipher suite. |
SSLNegotiatedKeyExchange | Returns the negotiated key exchange algorithm. |
SSLNegotiatedKeyExchangeStrength | Returns the negotiated key exchange algorithm strength. |
SSLNegotiatedVersion | Returns the negotiated protocol version. |
SSLSecurityFlags | Flags that control certificate verification. |
SSLServerCACerts | A newline separated list of CA certificates to use during SSL server certificate validation. |
TLS12SignatureAlgorithms | Defines the allowed TLS 1.2 signature algorithms when SSLProvider is set to Internal. |
TLS12SupportedGroups | The supported groups for ECC. |
TLS13KeyShareGroups | The groups for which to pregenerate key shares. |
TLS13SignatureAlgorithms | The allowed certificate signature algorithms. |
TLS13SupportedGroups | The supported groups for (EC)DHE key exchange. |
AbsoluteTimeout | Determines whether timeouts are inactivity timeouts or absolute timeouts. |
FirewallData | Used to send extra data to the firewall. |
InBufferSize | The size in bytes of the incoming queue of the socket. |
OutBufferSize | The size in bytes of the outgoing queue of the socket. |
BuildInfo | Information about the product's build. |
CodePage | The system code page used for Unicode to Multibyte translations. |
LicenseInfo | Information about the current license. |
MaskSensitiveData | Whether sensitive data is masked in log messages. |
ProcessIdleEvents | Whether the class uses its internal event loop to process events when the main thread is idle. |
SelectWaitMillis | The length of time in milliseconds the class will wait when DoEvents is called if there are no events to process. |
UseInternalSecurityAPI | Whether or not to use the system security libraries or an internal implementation. |
attachment_count Property
The number of records in the Attachment arrays.
Syntax
def get_attachment_count() -> int: ... def set_attachment_count(value: int) -> None: ...
attachment_count = property(get_attachment_count, set_attachment_count)
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at attachment_count - 1.attachment_data Property
The raw data for the attachment that will be sent with your message.
Syntax
def get_attachment_data(attachment_index: int) -> bytes: ... def set_attachment_data(attachment_index: int, value: bytes) -> None: ...
Default Value
""
Remarks
The raw data for the attachment that will be sent with your message. This field is used if attachment_file_name is not set.
The attachment_index parameter specifies the index of the item in the array. The size of the array is controlled by the attachment_count property.
attachment_file_name Property
This property contains the path of a file on your system to be sent as an attachment with your message.
Syntax
def get_attachment_file_name(attachment_index: int) -> str: ... def set_attachment_file_name(attachment_index: int, value: str) -> None: ...
Default Value
""
Remarks
This property contains the path of a file on your system to be sent as an attachment with your message.
The attachment_index parameter specifies the index of the item in the array. The size of the array is controlled by the attachment_count property.
attachment_name Property
This property contains the name of the attachment to be sent.
Syntax
def get_attachment_name(attachment_index: int) -> str: ... def set_attachment_name(attachment_index: int, value: str) -> None: ...
Default Value
""
Remarks
This property contains the name of the attachment to be sent.
The attachment_index parameter specifies the index of the item in the array. The size of the array is controlled by the attachment_count property.
auth_mechanism Property
This property is used when connecting to the mail server.
Syntax
def get_auth_mechanism() -> int: ... def set_auth_mechanism(value: int) -> None: ...
auth_mechanism = property(get_auth_mechanism, set_auth_mechanism)
Default Value
0
Remarks
This is the authentication mechanism property to be used when connecting to the mail server.
By default, this property is amUserPassword (0), and if the user and password properties are set, the AUTH command is sent to the server for authentication. If this property is set to amCRAMMD5 (1), CRAM-MD5 authentication is used instead.
If this property is set to amNTLM (2), NTLM authentication will be used.
If this property is set to amKerberos (6), Kerberos authentication will be used.
Note: This functionality is available only in Windows.
When set to amXOAUTH2 (7), set user to the username and AuthorizationIdentity to the OAuth token. See AuthorizationIdentity for details.
b_cc Property
This property includes a comma-separated list of addresses for blind carbon copies (optional).
Syntax
def get_b_cc() -> str: ... def set_b_cc(value: str) -> None: ...
b_cc = property(get_b_cc, set_b_cc)
Default Value
""
Remarks
This property specifies a comma-separated list of destinations for blind carbon copies of the mail message. A copy of the message is sent to each destination. Because no BCc SMTP header is created containing the destination addresses, individual recipients never see the list of the other recipients.
The class will return an error if the mail_server returns an error code about any email address specified in send_to or cc but it will fire an on_error event only if the same thing happens with an email address specified in this property.
If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.
Note: You must clear the message_recipients properties before setting this property to remove previous recipients.
cc Property
This property includes a comma-separated list of addresses for carbon copies (optional).
Syntax
def get_cc() -> str: ... def set_cc(value: str) -> None: ...
cc = property(get_cc, set_cc)
Default Value
""
Remarks
This property specifies a comma-separated list of destinations for carbon copies of the mail message. A copy of the message is sent to each destination, and a Cc SMTP header is created containing the destination addresses. This header is sent to every recipient of the message. If you don't want to copy this information to every recipient, then use blind carbon copies instead (see the description of the b_cc).
The class will return an error if the mail_server returns an error code about any email address specified in send_to or cc but it will fire an on_error event only if the same thing happens with an email address specified in b_cc.
If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.
Note: You must clear the message_recipients properties before setting this property to remove previous recipients.
connected Property
This property shows whether the class is connected.
Syntax
def get_connected() -> bool: ...
connected = property(get_connected, None)
Default Value
FALSE
Remarks
This property is used to determine whether or not the class is connected to the remote host. Use the connect and disconnect methods to manage the connection.
This property is read-only.
delivery_notification_to Property
This property includes the email address to which to send a delivery notification.
Syntax
def get_delivery_notification_to() -> str: ... def set_delivery_notification_to(value: str) -> None: ...
delivery_notification_to = property(get_delivery_notification_to, set_delivery_notification_to)
Default Value
""
Remarks
This property contains the email address to send to which to send a delivery notification. When set, a Return-Receipt-To header is added to the message. This property should be set to an email address that can receive the delivery notification.
firewall_auto_detect Property
This property tells the class whether or not to automatically detect and use firewall system settings, if available.
Syntax
def get_firewall_auto_detect() -> bool: ... def set_firewall_auto_detect(value: bool) -> None: ...
firewall_auto_detect = property(get_firewall_auto_detect, set_firewall_auto_detect)
Default Value
FALSE
Remarks
This property tells the class whether or not to automatically detect and use firewall system settings, if available.
firewall_type Property
This property determines the type of firewall to connect through.
Syntax
def get_firewall_type() -> int: ... def set_firewall_type(value: int) -> None: ...
firewall_type = property(get_firewall_type, set_firewall_type)
Default Value
0
Remarks
This property determines the type of firewall to connect through. The applicable values are as follows:
fwNone (0) | No firewall (default setting). |
fwTunnel (1) | Connect through a tunneling proxy. firewall_port is set to 80. |
fwSOCKS4 (2) | Connect through a SOCKS4 Proxy. firewall_port is set to 1080. |
fwSOCKS5 (3) | Connect through a SOCKS5 Proxy. firewall_port is set to 1080. |
fwSOCKS4A (10) | Connect through a SOCKS4A Proxy. firewall_port is set to 1080. |
firewall_host Property
This property contains the name or IP address of the firewall (optional).
Syntax
def get_firewall_host() -> str: ... def set_firewall_host(value: str) -> None: ...
firewall_host = property(get_firewall_host, set_firewall_host)
Default Value
""
Remarks
This property contains the name or IP address of the firewall (optional). If a firewall_host is given, the requested connections will be authenticated through the specified firewall when connecting.
If this property is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, the class fails with an error.
firewall_password Property
This property contains a password if authentication is to be used when connecting through the firewall.
Syntax
def get_firewall_password() -> str: ... def set_firewall_password(value: str) -> None: ...
firewall_password = property(get_firewall_password, set_firewall_password)
Default Value
""
Remarks
This property contains a password if authentication is to be used when connecting through the firewall. If firewall_host is specified, the firewall_user and firewall_password properties are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.
firewall_port Property
This property contains the Transmission Control Protocol (TCP) port for the firewall Host .
Syntax
def get_firewall_port() -> int: ... def set_firewall_port(value: int) -> None: ...
firewall_port = property(get_firewall_port, set_firewall_port)
Default Value
0
Remarks
This property contains the Transmission Control Protocol (TCP) port for the firewall firewall_host. See the description of the firewall_host property for details.
Note: This property is set automatically when firewall_type is set to a valid value. See the description of the firewall_type property for details.
firewall_user Property
This property contains a username if authentication is to be used when connecting through a firewall.
Syntax
def get_firewall_user() -> str: ... def set_firewall_user(value: str) -> None: ...
firewall_user = property(get_firewall_user, set_firewall_user)
Default Value
""
Remarks
This property contains a username if authentication is to be used when connecting through a firewall. If firewall_host is specified, this property and the firewall_password property are used to connect and authenticate to the given firewall. If the authentication fails, the class fails with an error.
from_ Property
This property includes the email address of the sender (required).
Syntax
def get_from() -> str: ... def set_from(value: str) -> None: ...
from_ = property(get_from, set_from)
Default Value
""
Remarks
This property is used to create a From SMTP header. This header identifies the sender of the message. A valid email address is required. Examples of valid addresses are as follows: "Friendly Name" <address@company.com> or address@company.com
If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.
idle Property
This property specifies the current status of the class.
Syntax
def get_idle() -> bool: ...
idle = property(get_idle, None)
Default Value
TRUE
Remarks
idle will be False if the component is currently busy (communicating or waiting for an answer), and True at all other times.
This property is read-only.
importance Property
This property indicates the importance of the mail message (optional).
Syntax
def get_importance() -> int: ... def set_importance(value: int) -> None: ...
importance = property(get_importance, set_importance)
Default Value
0
Remarks
This property indicates the importance of the mail message (optional). When set, an Importance header will be added to the message.
Importance is an indication to the recipient(s) about the level of importance of the message. The possible values are Unspecified (0), High (1), Normal (2), and Low (3).
last_reply Property
This property indicates the last reply received from the server.
Syntax
def get_last_reply() -> str: ...
last_reply = property(get_last_reply, None)
Default Value
""
Remarks
This property indicates the last reply received from the server. It can be used for informational purposes. The same information and more also can be retrieved through the on_pi_trail event.
This property is read-only.
local_host Property
This property includes the name of the local host or user-assigned IP interface through which connections are initiated or accepted.
Syntax
def get_local_host() -> str: ... def set_local_host(value: str) -> None: ...
local_host = property(get_local_host, set_local_host)
Default Value
""
Remarks
The local_host property contains the name of the local host as obtained by the gethostname() system call, or if the user has assigned an IP address, the value of that address.
In multihomed hosts (machines with more than one IP interface) setting LocalHost to the IP address of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface. It is recommended to provide an IP address rather than a hostname when setting this property to ensure the desired interface is used.
If the class is connected, the local_host property shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).
Note: local_host is not persistent. You must always set it in code, and never in the property window.
mail_port Property
This property includes the server port for SMTP (default 25).
Syntax
def get_mail_port() -> int: ... def set_mail_port(value: int) -> None: ...
mail_port = property(get_mail_port, set_mail_port)
Default Value
25
Remarks
This property contains the server port for SMTP (default 25). A valid port number (a value between 1 and 65535) is required for the connection to take place. The property must be set before a connection is attempted and cannot be changed once a connection is established. Any attempt to change this property while connected will fail with an error.
For an implicit Secure Sockets Layer (SSL), use port 465 (please refer to the ssl_start_mode property for more information).
mail_server Property
This property includes the name or address of a mail server (mail relay).
Syntax
def get_mail_server() -> str: ... def set_mail_server(value: str) -> None: ...
mail_server = property(get_mail_server, set_mail_server)
Default Value
""
Remarks
This property specifies the IP address (IP number in dotted internet format) or domain name for a mail relay through which messages will be routed. It is set before a connection is attempted and cannot be changed once a connection is in progress.
The current version of the class does not provide a default value for the mail relay. You must provide a host name yourself. Generally, any internet host with an SMTP server will suffice (e.g., a UNIX host), but it is preferable to select a mail_server that is close to the machine sending mail.
If this property is set to a domain name, a DNS request is initiated. Upon successful termination of the request, this property is set to the corresponding address. If the search is not successful, an error is returned.
If the class is configured to use a SOCKS firewall, the value assigned to this property may be preceded with an "*". If this is the case, the host name is passed to the firewall unresolved and the firewall performs the DNS resolution.
message_date Property
This property includes the date of the mail message (optional).
Syntax
def get_message_date() -> str: ... def set_message_date(value: str) -> None: ...
message_date = property(get_message_date, set_message_date)
Default Value
"*"
Remarks
If this property contains a nonempty string, then a Date SMTP header is created and attached to the message. If it is an empty string, then the date information is added by the mail relay(s) the message goes through.
Special case: If this property is set to the special value "*", a Date SMTP header reflecting the current date and time is generated when message_headers is computed and the message is sent. This is the default behavior of the class
RFC 822 contains detailed date format specifications. An example of a valid date is "Fri, 1 Mar 96 21:24:52 EST".
message_id Property
This property includes the message identifier for the message.
Syntax
def get_message_id() -> str: ... def set_message_id(value: str) -> None: ...
message_id = property(get_message_id, set_message_id)
Default Value
"*"
Remarks
This property contains the message identifier for the message. When set, the value of message_id is used as the Message-Id header value of the message. A special value of "*" will automatically generate a random unique identifier for the message.
message_recipient_count Property
The number of records in the MessageRecipient arrays.
Syntax
def get_message_recipient_count() -> int: ... def set_message_recipient_count(value: int) -> None: ...
message_recipient_count = property(get_message_recipient_count, set_message_recipient_count)
Default Value
0
Remarks
This property controls the size of the following arrays:
The array indices start at 0 and end at message_recipient_count - 1.message_recipient_address Property
This property contains the email address of the recipient.
Syntax
def get_message_recipient_address(recipient_index: int) -> str: ... def set_message_recipient_address(recipient_index: int, value: str) -> None: ...
Default Value
""
Remarks
This property contains the email address of the recipient.
The recipient_index parameter specifies the index of the item in the array. The size of the array is controlled by the message_recipient_count property.
message_recipient_name Property
This property contains the name of the recipient.
Syntax
def get_message_recipient_name(recipient_index: int) -> str: ... def set_message_recipient_name(recipient_index: int, value: str) -> None: ...
Default Value
""
Remarks
This property contains the name of the recipient.
The recipient_index parameter specifies the index of the item in the array. The size of the array is controlled by the message_recipient_count property.
message_recipient_options Property
This property contains the recipient sending options (used only by SMTP).
Syntax
def get_message_recipient_options(recipient_index: int) -> str: ... def set_message_recipient_options(recipient_index: int, value: str) -> None: ...
Default Value
""
Remarks
This property contains the recipient sending options (used only by SMTP). This must be a string of RFC-compliant recipient options (used by SMTP).
One type of option is a delivery status notification sent per recipient, which is specified by RFC 1891.
component.MessageRecipientOptions(0) = "NOTIFY SUCCESS,FAILURE,DELAY";
The recipient_index parameter specifies the index of the item in the array. The size of the array is controlled by the message_recipient_count property.
message_recipient_type Property
This property contains the recipient type: To, Cc, or Bcc.
Syntax
def get_message_recipient_type(recipient_index: int) -> int: ... def set_message_recipient_type(recipient_index: int, value: int) -> None: ...
Default Value
0
Remarks
This property contains the recipient type: To, Cc, or Bcc.
The recipient_index parameter specifies the index of the item in the array. The size of the array is controlled by the message_recipient_count property.
message_text Property
This is the full text of the message to send (without headers).
Syntax
def get_message_text() -> str: ... def set_message_text(value: str) -> None: ...
message_text = property(get_message_text, set_message_text)
Default Value
""
Remarks
This property contains the full text of the message.
The text contained in this property should be a collection of lines with lengths less than or equal to 80 bytes separated by CRLF ("\r\n") . The text in the message lines must contain 7-bit characters so that the message can successfully pass through the multitude of mail systems on the internet.
The class automatically escapes lines that start with a "." by adding another as specified in RFC 821. The message text is unescaped by the receiving agent, so the process is fully transparent.
other_headers Property
This property includes an RFC 822-compliant string consisting of extra headers.
Syntax
def get_other_headers() -> str: ... def set_other_headers(value: str) -> None: ...
other_headers = property(get_other_headers, set_other_headers)
Default Value
""
Remarks
This property contains a string of headers to be appended to the message headers created from other properties like send_to, subject, and so on.
The headers must be of the format "header: value" as specified in RFC 822. Header lines should be separated by CRLF ("\r\n") .
Use this property with caution. If this property contains invalid headers, message delivery might not be successful.
This property is useful for extending the functionality of the class. A good example is delivery of MIME-encoded messages.
Special case: If this property starts with an empty line (CRLF), then the value of this property is used instead of the normally computed message headers.
Example. Sending an Email with an Additional Header:
component.MailServer = "MyServer";
component.From = "me@server.com";
component.SendTo = "recipient@server.com";
component.Subject = "My Subject";
component.MessageText = "This is the message body.";
component.OtherHeaders = "HeaderName: HeaderValue";
component.Send();
password Property
This property includes a password for logon to the MailServer .
Syntax
def get_password() -> str: ... def set_password(value: str) -> None: ...
password = property(get_password, set_password)
Default Value
""
Remarks
If this property is set to a nonempty string, then when connecting to the mail_server an AUTH or CRAM-MD5 (depending on the value of auth_mechanism) command is sent to provide authentication information for the user.
priority Property
This property includes the priority of the mail message (optional).
Syntax
def get_priority() -> int: ... def set_priority(value: int) -> None: ...
priority = property(get_priority, set_priority)
Default Value
0
Remarks
When this property is set, a priority header will be added to the message. Priority is an indication about the delivery priority of the message. The possible values are epNormal, epUrgent, and epNonUrgent.
read_receipt_to Property
This property includes the email address to send a read-receipt to.
Syntax
def get_read_receipt_to() -> str: ... def set_read_receipt_to(value: str) -> None: ...
read_receipt_to = property(get_read_receipt_to, set_read_receipt_to)
Default Value
""
Remarks
When this property is set, a Disposition-Notification-To header is added to the message. This property should be set to an email address that should receive the read-receipt.
reply_to Property
This property includes a mail address to which to reply (optional).
Syntax
def get_reply_to() -> str: ... def set_reply_to(value: str) -> None: ...
reply_to = property(get_reply_to, set_reply_to)
Default Value
""
Remarks
If this property contains a nonempty string, a Reply-To SMTP header is created for the message. This header shows the address to use for replies, which is useful if this address is different from the one in from_.
If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.
send_to Property
This property includes a comma-separated list of addresses for destinations (required).
Syntax
def get_send_to() -> str: ... def set_send_to(value: str) -> None: ...
send_to = property(get_send_to, set_send_to)
Default Value
""
Remarks
This property specifies a comma-separated list of destinations for the mail message. A copy of the message is sent to each of them, and a To SMTP header is created containing the destination addresses.
Examples of valid addresses are as follows: "Friendly Name" <address@company.com> or address@company.com
The class will fail if the mail_server returns an error code about any email address specified in SendTo or cc but it will silently ignore the error if the same thing happens with an email address specified in b_cc.
If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.
Note: You must clear the message_recipients properties before setting this property to remove previous recipients.
sensitivity Property
This property indicates the sensitivity of the mail message (optional).
Syntax
def get_sensitivity() -> int: ... def set_sensitivity(value: int) -> None: ...
sensitivity = property(get_sensitivity, set_sensitivity)
Default Value
0
Remarks
This property provides an indication of how sensitive it is to disclose the message to people other than the recipients of the message. When set, a Sensitivity header will added to the message. Possible values are as follows: esPersonal (1), esPrivate (2), and esCompanyConfidential (3).
ssl_accept_server_cert_effective_date Property
This is the date on which this certificate becomes valid.
Syntax
def get_ssl_accept_server_cert_effective_date() -> str: ...
ssl_accept_server_cert_effective_date = property(get_ssl_accept_server_cert_effective_date, None)
Default Value
""
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
ssl_accept_server_cert_expiration_date Property
This is the date the certificate expires.
Syntax
def get_ssl_accept_server_cert_expiration_date() -> str: ...
ssl_accept_server_cert_expiration_date = property(get_ssl_accept_server_cert_expiration_date, None)
Default Value
""
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
ssl_accept_server_cert_extended_key_usage Property
This is a comma-delimited list of extended key usage identifiers.
Syntax
def get_ssl_accept_server_cert_extended_key_usage() -> str: ...
ssl_accept_server_cert_extended_key_usage = property(get_ssl_accept_server_cert_extended_key_usage, None)
Default Value
""
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
ssl_accept_server_cert_fingerprint Property
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Syntax
def get_ssl_accept_server_cert_fingerprint() -> str: ...
ssl_accept_server_cert_fingerprint = property(get_ssl_accept_server_cert_fingerprint, None)
Default Value
""
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
ssl_accept_server_cert_fingerprint_sha1 Property
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Syntax
def get_ssl_accept_server_cert_fingerprint_sha1() -> str: ...
ssl_accept_server_cert_fingerprint_sha1 = property(get_ssl_accept_server_cert_fingerprint_sha1, None)
Default Value
""
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
ssl_accept_server_cert_fingerprint_sha256 Property
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Syntax
def get_ssl_accept_server_cert_fingerprint_sha256() -> str: ...
ssl_accept_server_cert_fingerprint_sha256 = property(get_ssl_accept_server_cert_fingerprint_sha256, None)
Default Value
""
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
ssl_accept_server_cert_issuer Property
This is the issuer of the certificate.
Syntax
def get_ssl_accept_server_cert_issuer() -> str: ...
ssl_accept_server_cert_issuer = property(get_ssl_accept_server_cert_issuer, None)
Default Value
""
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
ssl_accept_server_cert_private_key Property
This is the private key of the certificate (if available).
Syntax
def get_ssl_accept_server_cert_private_key() -> str: ...
ssl_accept_server_cert_private_key = property(get_ssl_accept_server_cert_private_key, None)
Default Value
""
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The ssl_accept_server_cert_private_key may be available but not exportable. In this case, ssl_accept_server_cert_private_key returns an empty string.
This property is read-only.
ssl_accept_server_cert_private_key_available Property
This property shows whether a PrivateKey is available for the selected certificate.
Syntax
def get_ssl_accept_server_cert_private_key_available() -> bool: ...
ssl_accept_server_cert_private_key_available = property(get_ssl_accept_server_cert_private_key_available, None)
Default Value
FALSE
Remarks
This property shows whether a ssl_accept_server_cert_private_key is available for the selected certificate. If ssl_accept_server_cert_private_key_available is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
ssl_accept_server_cert_private_key_container Property
This is the name of the PrivateKey container for the certificate (if available).
Syntax
def get_ssl_accept_server_cert_private_key_container() -> str: ...
ssl_accept_server_cert_private_key_container = property(get_ssl_accept_server_cert_private_key_container, None)
Default Value
""
Remarks
This is the name of the ssl_accept_server_cert_private_key container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
ssl_accept_server_cert_public_key Property
This is the public key of the certificate.
Syntax
def get_ssl_accept_server_cert_public_key() -> str: ...
ssl_accept_server_cert_public_key = property(get_ssl_accept_server_cert_public_key, None)
Default Value
""
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
ssl_accept_server_cert_public_key_algorithm Property
This property contains the textual description of the certificate's public key algorithm.
Syntax
def get_ssl_accept_server_cert_public_key_algorithm() -> str: ...
ssl_accept_server_cert_public_key_algorithm = property(get_ssl_accept_server_cert_public_key_algorithm, None)
Default Value
""
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
ssl_accept_server_cert_public_key_length Property
This is the length of the certificate's public key (in bits).
Syntax
def get_ssl_accept_server_cert_public_key_length() -> int: ...
ssl_accept_server_cert_public_key_length = property(get_ssl_accept_server_cert_public_key_length, None)
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
ssl_accept_server_cert_serial_number Property
This is the serial number of the certificate encoded as a string.
Syntax
def get_ssl_accept_server_cert_serial_number() -> str: ...
ssl_accept_server_cert_serial_number = property(get_ssl_accept_server_cert_serial_number, None)
Default Value
""
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
ssl_accept_server_cert_signature_algorithm Property
The property contains the text description of the certificate's signature algorithm.
Syntax
def get_ssl_accept_server_cert_signature_algorithm() -> str: ...
ssl_accept_server_cert_signature_algorithm = property(get_ssl_accept_server_cert_signature_algorithm, None)
Default Value
""
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
ssl_accept_server_cert_store Property
This is the name of the certificate store for the client certificate.
Syntax
def get_ssl_accept_server_cert_store() -> bytes: ... def set_ssl_accept_server_cert_store(value: bytes) -> None: ...
ssl_accept_server_cert_store = property(get_ssl_accept_server_cert_store, set_ssl_accept_server_cert_store)
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The ssl_accept_server_cert_store_type property denotes the type of the certificate store specified by ssl_accept_server_cert_store. If the store is password protected, specify the password in ssl_accept_server_cert_store_password.
ssl_accept_server_cert_store is used in conjunction with the ssl_accept_server_cert_subject property to specify client certificates. If ssl_accept_server_cert_store has a value, and ssl_accept_server_cert_subject or ssl_accept_server_cert_encoded is set, a search for a certificate is initiated. Please see the ssl_accept_server_cert_subject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
ssl_accept_server_cert_store_password Property
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
def get_ssl_accept_server_cert_store_password() -> str: ... def set_ssl_accept_server_cert_store_password(value: str) -> None: ...
ssl_accept_server_cert_store_password = property(get_ssl_accept_server_cert_store_password, set_ssl_accept_server_cert_store_password)
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
ssl_accept_server_cert_store_type Property
This is the type of certificate store for this certificate.
Syntax
def get_ssl_accept_server_cert_store_type() -> int: ... def set_ssl_accept_server_cert_store_type(value: int) -> None: ...
ssl_accept_server_cert_store_type = property(get_ssl_accept_server_cert_store_type, set_ssl_accept_server_cert_store_type)
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The list_store_certificates method may be called after setting cert_store_type to cstPKCS11, cert_store_password to the PIN, and cert_store to the full path of the PKCS#11 DLL. The certificate information returned in the on_cert_list event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the ssl_accept_server_cert_store and set ssl_accept_server_cert_store_password to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
ssl_accept_server_cert_subject_alt_names Property
This property contains comma-separated lists of alternative subject names for the certificate.
Syntax
def get_ssl_accept_server_cert_subject_alt_names() -> str: ...
ssl_accept_server_cert_subject_alt_names = property(get_ssl_accept_server_cert_subject_alt_names, None)
Default Value
""
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
ssl_accept_server_cert_thumbprint_md5 Property
This property contains the MD5 hash of the certificate.
Syntax
def get_ssl_accept_server_cert_thumbprint_md5() -> str: ...
ssl_accept_server_cert_thumbprint_md5 = property(get_ssl_accept_server_cert_thumbprint_md5, None)
Default Value
""
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
ssl_accept_server_cert_thumbprint_sha1 Property
This property contains the SHA-1 hash of the certificate.
Syntax
def get_ssl_accept_server_cert_thumbprint_sha1() -> str: ...
ssl_accept_server_cert_thumbprint_sha1 = property(get_ssl_accept_server_cert_thumbprint_sha1, None)
Default Value
""
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
ssl_accept_server_cert_thumbprint_sha256 Property
This property contains the SHA-256 hash of the certificate.
Syntax
def get_ssl_accept_server_cert_thumbprint_sha256() -> str: ...
ssl_accept_server_cert_thumbprint_sha256 = property(get_ssl_accept_server_cert_thumbprint_sha256, None)
Default Value
""
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
ssl_accept_server_cert_usage Property
This property contains the text description of UsageFlags .
Syntax
def get_ssl_accept_server_cert_usage() -> str: ...
ssl_accept_server_cert_usage = property(get_ssl_accept_server_cert_usage, None)
Default Value
""
Remarks
This property contains the text description of ssl_accept_server_cert_usage_flags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
ssl_accept_server_cert_usage_flags Property
This property contains the flags that show intended use for the certificate.
Syntax
def get_ssl_accept_server_cert_usage_flags() -> int: ...
ssl_accept_server_cert_usage_flags = property(get_ssl_accept_server_cert_usage_flags, None)
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of ssl_accept_server_cert_usage_flags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the ssl_accept_server_cert_usage property for a text representation of ssl_accept_server_cert_usage_flags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
ssl_accept_server_cert_version Property
This property contains the certificate's version number.
Syntax
def get_ssl_accept_server_cert_version() -> str: ...
ssl_accept_server_cert_version = property(get_ssl_accept_server_cert_version, None)
Default Value
""
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
ssl_accept_server_cert_subject Property
This is the subject of the certificate used for client authentication.
Syntax
def get_ssl_accept_server_cert_subject() -> str: ... def set_ssl_accept_server_cert_subject(value: str) -> None: ...
ssl_accept_server_cert_subject = property(get_ssl_accept_server_cert_subject, set_ssl_accept_server_cert_subject)
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
ssl_accept_server_cert_encoded Property
This is the certificate (PEM/Base64 encoded).
Syntax
def get_ssl_accept_server_cert_encoded() -> bytes: ... def set_ssl_accept_server_cert_encoded(value: bytes) -> None: ...
ssl_accept_server_cert_encoded = property(get_ssl_accept_server_cert_encoded, set_ssl_accept_server_cert_encoded)
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_accept_server_cert_store and ssl_accept_server_cert_subject properties also may be used to specify a certificate.
When ssl_accept_server_cert_encoded is set, a search is initiated in the current ssl_accept_server_cert_store for the private key of the certificate. If the key is found, ssl_accept_server_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_accept_server_cert_subject is set to an empty string.
ssl_cert_effective_date Property
This is the date on which this certificate becomes valid.
Syntax
def get_ssl_cert_effective_date() -> str: ...
ssl_cert_effective_date = property(get_ssl_cert_effective_date, None)
Default Value
""
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
ssl_cert_expiration_date Property
This is the date the certificate expires.
Syntax
def get_ssl_cert_expiration_date() -> str: ...
ssl_cert_expiration_date = property(get_ssl_cert_expiration_date, None)
Default Value
""
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
ssl_cert_extended_key_usage Property
This is a comma-delimited list of extended key usage identifiers.
Syntax
def get_ssl_cert_extended_key_usage() -> str: ...
ssl_cert_extended_key_usage = property(get_ssl_cert_extended_key_usage, None)
Default Value
""
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
ssl_cert_fingerprint Property
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Syntax
def get_ssl_cert_fingerprint() -> str: ...
ssl_cert_fingerprint = property(get_ssl_cert_fingerprint, None)
Default Value
""
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
ssl_cert_fingerprint_sha1 Property
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Syntax
def get_ssl_cert_fingerprint_sha1() -> str: ...
ssl_cert_fingerprint_sha1 = property(get_ssl_cert_fingerprint_sha1, None)
Default Value
""
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
ssl_cert_fingerprint_sha256 Property
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Syntax
def get_ssl_cert_fingerprint_sha256() -> str: ...
ssl_cert_fingerprint_sha256 = property(get_ssl_cert_fingerprint_sha256, None)
Default Value
""
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
ssl_cert_issuer Property
This is the issuer of the certificate.
Syntax
def get_ssl_cert_issuer() -> str: ...
ssl_cert_issuer = property(get_ssl_cert_issuer, None)
Default Value
""
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
ssl_cert_private_key Property
This is the private key of the certificate (if available).
Syntax
def get_ssl_cert_private_key() -> str: ...
ssl_cert_private_key = property(get_ssl_cert_private_key, None)
Default Value
""
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The ssl_cert_private_key may be available but not exportable. In this case, ssl_cert_private_key returns an empty string.
This property is read-only.
ssl_cert_private_key_available Property
This property shows whether a PrivateKey is available for the selected certificate.
Syntax
def get_ssl_cert_private_key_available() -> bool: ...
ssl_cert_private_key_available = property(get_ssl_cert_private_key_available, None)
Default Value
FALSE
Remarks
This property shows whether a ssl_cert_private_key is available for the selected certificate. If ssl_cert_private_key_available is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
ssl_cert_private_key_container Property
This is the name of the PrivateKey container for the certificate (if available).
Syntax
def get_ssl_cert_private_key_container() -> str: ...
ssl_cert_private_key_container = property(get_ssl_cert_private_key_container, None)
Default Value
""
Remarks
This is the name of the ssl_cert_private_key container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
ssl_cert_public_key Property
This is the public key of the certificate.
Syntax
def get_ssl_cert_public_key() -> str: ...
ssl_cert_public_key = property(get_ssl_cert_public_key, None)
Default Value
""
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
ssl_cert_public_key_algorithm Property
This property contains the textual description of the certificate's public key algorithm.
Syntax
def get_ssl_cert_public_key_algorithm() -> str: ...
ssl_cert_public_key_algorithm = property(get_ssl_cert_public_key_algorithm, None)
Default Value
""
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
ssl_cert_public_key_length Property
This is the length of the certificate's public key (in bits).
Syntax
def get_ssl_cert_public_key_length() -> int: ...
ssl_cert_public_key_length = property(get_ssl_cert_public_key_length, None)
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
ssl_cert_serial_number Property
This is the serial number of the certificate encoded as a string.
Syntax
def get_ssl_cert_serial_number() -> str: ...
ssl_cert_serial_number = property(get_ssl_cert_serial_number, None)
Default Value
""
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
ssl_cert_signature_algorithm Property
The property contains the text description of the certificate's signature algorithm.
Syntax
def get_ssl_cert_signature_algorithm() -> str: ...
ssl_cert_signature_algorithm = property(get_ssl_cert_signature_algorithm, None)
Default Value
""
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
ssl_cert_store Property
This is the name of the certificate store for the client certificate.
Syntax
def get_ssl_cert_store() -> bytes: ... def set_ssl_cert_store(value: bytes) -> None: ...
ssl_cert_store = property(get_ssl_cert_store, set_ssl_cert_store)
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The ssl_cert_store_type property denotes the type of the certificate store specified by ssl_cert_store. If the store is password protected, specify the password in ssl_cert_store_password.
ssl_cert_store is used in conjunction with the ssl_cert_subject property to specify client certificates. If ssl_cert_store has a value, and ssl_cert_subject or ssl_cert_encoded is set, a search for a certificate is initiated. Please see the ssl_cert_subject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
ssl_cert_store_password Property
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
def get_ssl_cert_store_password() -> str: ... def set_ssl_cert_store_password(value: str) -> None: ...
ssl_cert_store_password = property(get_ssl_cert_store_password, set_ssl_cert_store_password)
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
ssl_cert_store_type Property
This is the type of certificate store for this certificate.
Syntax
def get_ssl_cert_store_type() -> int: ... def set_ssl_cert_store_type(value: int) -> None: ...
ssl_cert_store_type = property(get_ssl_cert_store_type, set_ssl_cert_store_type)
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The list_store_certificates method may be called after setting cert_store_type to cstPKCS11, cert_store_password to the PIN, and cert_store to the full path of the PKCS#11 DLL. The certificate information returned in the on_cert_list event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the ssl_cert_store and set ssl_cert_store_password to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
ssl_cert_subject_alt_names Property
This property contains comma-separated lists of alternative subject names for the certificate.
Syntax
def get_ssl_cert_subject_alt_names() -> str: ...
ssl_cert_subject_alt_names = property(get_ssl_cert_subject_alt_names, None)
Default Value
""
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
ssl_cert_thumbprint_md5 Property
This property contains the MD5 hash of the certificate.
Syntax
def get_ssl_cert_thumbprint_md5() -> str: ...
ssl_cert_thumbprint_md5 = property(get_ssl_cert_thumbprint_md5, None)
Default Value
""
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
ssl_cert_thumbprint_sha1 Property
This property contains the SHA-1 hash of the certificate.
Syntax
def get_ssl_cert_thumbprint_sha1() -> str: ...
ssl_cert_thumbprint_sha1 = property(get_ssl_cert_thumbprint_sha1, None)
Default Value
""
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
ssl_cert_thumbprint_sha256 Property
This property contains the SHA-256 hash of the certificate.
Syntax
def get_ssl_cert_thumbprint_sha256() -> str: ...
ssl_cert_thumbprint_sha256 = property(get_ssl_cert_thumbprint_sha256, None)
Default Value
""
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
ssl_cert_usage Property
This property contains the text description of UsageFlags .
Syntax
def get_ssl_cert_usage() -> str: ...
ssl_cert_usage = property(get_ssl_cert_usage, None)
Default Value
""
Remarks
This property contains the text description of ssl_cert_usage_flags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
ssl_cert_usage_flags Property
This property contains the flags that show intended use for the certificate.
Syntax
def get_ssl_cert_usage_flags() -> int: ...
ssl_cert_usage_flags = property(get_ssl_cert_usage_flags, None)
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of ssl_cert_usage_flags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the ssl_cert_usage property for a text representation of ssl_cert_usage_flags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
ssl_cert_version Property
This property contains the certificate's version number.
Syntax
def get_ssl_cert_version() -> str: ...
ssl_cert_version = property(get_ssl_cert_version, None)
Default Value
""
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
ssl_cert_subject Property
This is the subject of the certificate used for client authentication.
Syntax
def get_ssl_cert_subject() -> str: ... def set_ssl_cert_subject(value: str) -> None: ...
ssl_cert_subject = property(get_ssl_cert_subject, set_ssl_cert_subject)
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
ssl_cert_encoded Property
This is the certificate (PEM/Base64 encoded).
Syntax
def get_ssl_cert_encoded() -> bytes: ... def set_ssl_cert_encoded(value: bytes) -> None: ...
ssl_cert_encoded = property(get_ssl_cert_encoded, set_ssl_cert_encoded)
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_cert_store and ssl_cert_subject properties also may be used to specify a certificate.
When ssl_cert_encoded is set, a search is initiated in the current ssl_cert_store for the private key of the certificate. If the key is found, ssl_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_cert_subject is set to an empty string.
ssl_enabled Property
This property indicates whether Transport Layer Security/Secure Sockets Layer (TLS/SSL) is enabled.
Syntax
def get_ssl_enabled() -> bool: ... def set_ssl_enabled(value: bool) -> None: ...
ssl_enabled = property(get_ssl_enabled, set_ssl_enabled)
Default Value
FALSE
Remarks
This property specifies whether TLS/SSL is enabled in the class. When False (default), the class operates in plaintext mode. When True, TLS/SSL is enabled.
TLS/SSL may also be enabled by setting ssl_start_mode. Setting ssl_start_mode will automatically update this property value.
ssl_provider Property
This property specifies the Secure Sockets Layer/Transport Layer Security (SSL/TLS) implementation to use.
Syntax
def get_ssl_provider() -> int: ... def set_ssl_provider(value: int) -> None: ...
ssl_provider = property(get_ssl_provider, set_ssl_provider)
Default Value
0
Remarks
This property specifies the SSL/TLS implementation to use. In most cases the default value of 0 (Automatic) is recommended and should not be changed. When set to 0 (Automatic), the class will select whether to use the platform implementation or the internal implementation depending on the operating system as well as the TLS version being used.
Possible values are as follows:
0 (sslpAutomatic - default) | Automatically selects the appropriate implementation. |
1 (sslpPlatform) | Uses the platform/system implementation. |
2 (sslpInternal) | Uses the internal implementation. |
In most cases using the default value (Automatic) is recommended. The class will select a provider depending on the current platform.
When Automatic is selected, on Windows, the class will use the platform implementation. On Linux/macOS, the class will use the internal implementation. When TLS 1.3 is enabled via SSLEnabledProtocols, the internal implementation is used on all platforms.
ssl_server_cert_effective_date Property
This is the date on which this certificate becomes valid.
Syntax
def get_ssl_server_cert_effective_date() -> str: ...
ssl_server_cert_effective_date = property(get_ssl_server_cert_effective_date, None)
Default Value
""
Remarks
This is the date on which this certificate becomes valid. Before this date, it is not valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2000 15:00:00.
This property is read-only.
ssl_server_cert_expiration_date Property
This is the date the certificate expires.
Syntax
def get_ssl_server_cert_expiration_date() -> str: ...
ssl_server_cert_expiration_date = property(get_ssl_server_cert_expiration_date, None)
Default Value
""
Remarks
This is the date the certificate expires. After this date, the certificate will no longer be valid. The date is localized to the system's time zone. The following example illustrates the format of an encoded date:
23-Jan-2001 15:00:00.
This property is read-only.
ssl_server_cert_extended_key_usage Property
This is a comma-delimited list of extended key usage identifiers.
Syntax
def get_ssl_server_cert_extended_key_usage() -> str: ...
ssl_server_cert_extended_key_usage = property(get_ssl_server_cert_extended_key_usage, None)
Default Value
""
Remarks
This is a comma-delimited list of extended key usage identifiers. These are the same as ASN.1 object identifiers (OIDs).
This property is read-only.
ssl_server_cert_fingerprint Property
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate.
Syntax
def get_ssl_server_cert_fingerprint() -> str: ...
ssl_server_cert_fingerprint = property(get_ssl_server_cert_fingerprint, None)
Default Value
""
Remarks
This is the hex-encoded, 16-byte MD5 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: bc:2a:72:af:fe:58:17:43:7a:5f:ba:5a:7c:90:f7:02
This property is read-only.
ssl_server_cert_fingerprint_sha1 Property
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate.
Syntax
def get_ssl_server_cert_fingerprint_sha1() -> str: ...
ssl_server_cert_fingerprint_sha1 = property(get_ssl_server_cert_fingerprint_sha1, None)
Default Value
""
Remarks
This is the hex-encoded, 20-byte SHA-1 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 30:7b:fa:38:65:83:ff:da:b4:4e:07:3f:17:b8:a4:ed:80:be:ff:84
This property is read-only.
ssl_server_cert_fingerprint_sha256 Property
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate.
Syntax
def get_ssl_server_cert_fingerprint_sha256() -> str: ...
ssl_server_cert_fingerprint_sha256 = property(get_ssl_server_cert_fingerprint_sha256, None)
Default Value
""
Remarks
This is the hex-encoded, 32-byte SHA-256 fingerprint of the certificate. This property is primarily used for keys which do not have a corresponding X.509 public certificate, such as PEM keys that only contain a private key. It is commonly used for SSH keys.
The following example illustrates the format: 6a:80:5c:33:a9:43:ea:b0:96:12:8a:64:96:30:ef:4a:8a:96:86:ce:f4:c7:be:10:24:8e:2b:60:9e:f3:59:53
This property is read-only.
ssl_server_cert_issuer Property
This is the issuer of the certificate.
Syntax
def get_ssl_server_cert_issuer() -> str: ...
ssl_server_cert_issuer = property(get_ssl_server_cert_issuer, None)
Default Value
""
Remarks
This is the issuer of the certificate. This property contains a string representation of the name of the issuing authority for the certificate.
This property is read-only.
ssl_server_cert_private_key Property
This is the private key of the certificate (if available).
Syntax
def get_ssl_server_cert_private_key() -> str: ...
ssl_server_cert_private_key = property(get_ssl_server_cert_private_key, None)
Default Value
""
Remarks
This is the private key of the certificate (if available). The key is provided as PEM/Base64-encoded data.
Note: The ssl_server_cert_private_key may be available but not exportable. In this case, ssl_server_cert_private_key returns an empty string.
This property is read-only.
ssl_server_cert_private_key_available Property
This property shows whether a PrivateKey is available for the selected certificate.
Syntax
def get_ssl_server_cert_private_key_available() -> bool: ...
ssl_server_cert_private_key_available = property(get_ssl_server_cert_private_key_available, None)
Default Value
FALSE
Remarks
This property shows whether a ssl_server_cert_private_key is available for the selected certificate. If ssl_server_cert_private_key_available is True, the certificate may be used for authentication purposes (e.g., server authentication).
This property is read-only.
ssl_server_cert_private_key_container Property
This is the name of the PrivateKey container for the certificate (if available).
Syntax
def get_ssl_server_cert_private_key_container() -> str: ...
ssl_server_cert_private_key_container = property(get_ssl_server_cert_private_key_container, None)
Default Value
""
Remarks
This is the name of the ssl_server_cert_private_key container for the certificate (if available). This functionality is available only on Windows platforms.
This property is read-only.
ssl_server_cert_public_key Property
This is the public key of the certificate.
Syntax
def get_ssl_server_cert_public_key() -> str: ...
ssl_server_cert_public_key = property(get_ssl_server_cert_public_key, None)
Default Value
""
Remarks
This is the public key of the certificate. The key is provided as PEM/Base64-encoded data.
This property is read-only.
ssl_server_cert_public_key_algorithm Property
This property contains the textual description of the certificate's public key algorithm.
Syntax
def get_ssl_server_cert_public_key_algorithm() -> str: ...
ssl_server_cert_public_key_algorithm = property(get_ssl_server_cert_public_key_algorithm, None)
Default Value
""
Remarks
This property contains the textual description of the certificate's public key algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_DH") or an object identifier (OID) string representing the algorithm.
This property is read-only.
ssl_server_cert_public_key_length Property
This is the length of the certificate's public key (in bits).
Syntax
def get_ssl_server_cert_public_key_length() -> int: ...
ssl_server_cert_public_key_length = property(get_ssl_server_cert_public_key_length, None)
Default Value
0
Remarks
This is the length of the certificate's public key (in bits). Common values are 512, 1024, and 2048.
This property is read-only.
ssl_server_cert_serial_number Property
This is the serial number of the certificate encoded as a string.
Syntax
def get_ssl_server_cert_serial_number() -> str: ...
ssl_server_cert_serial_number = property(get_ssl_server_cert_serial_number, None)
Default Value
""
Remarks
This is the serial number of the certificate encoded as a string. The number is encoded as a series of hexadecimal digits, with each pair representing a byte of the serial number.
This property is read-only.
ssl_server_cert_signature_algorithm Property
The property contains the text description of the certificate's signature algorithm.
Syntax
def get_ssl_server_cert_signature_algorithm() -> str: ...
ssl_server_cert_signature_algorithm = property(get_ssl_server_cert_signature_algorithm, None)
Default Value
""
Remarks
The property contains the text description of the certificate's signature algorithm. The property contains either the name of the algorithm (e.g., "RSA" or "RSA_MD5RSA") or an object identifier (OID) string representing the algorithm.
This property is read-only.
ssl_server_cert_store Property
This is the name of the certificate store for the client certificate.
Syntax
def get_ssl_server_cert_store() -> bytes: ...
ssl_server_cert_store = property(get_ssl_server_cert_store, None)
Default Value
"MY"
Remarks
This is the name of the certificate store for the client certificate.
The ssl_server_cert_store_type property denotes the type of the certificate store specified by ssl_server_cert_store. If the store is password protected, specify the password in ssl_server_cert_store_password.
ssl_server_cert_store is used in conjunction with the ssl_server_cert_subject property to specify client certificates. If ssl_server_cert_store has a value, and ssl_server_cert_subject or ssl_server_cert_encoded is set, a search for a certificate is initiated. Please see the ssl_server_cert_subject property for details.
Designations of certificate stores are platform dependent.
The following designations are the most common User and Machine certificate stores in Windows:
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e., PKCS#12 certificate store).
This property is read-only.
ssl_server_cert_store_password Property
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
Syntax
def get_ssl_server_cert_store_password() -> str: ...
ssl_server_cert_store_password = property(get_ssl_server_cert_store_password, None)
Default Value
""
Remarks
If the type of certificate store requires a password, this property is used to specify the password needed to open the certificate store.
This property is read-only.
ssl_server_cert_store_type Property
This is the type of certificate store for this certificate.
Syntax
def get_ssl_server_cert_store_type() -> int: ...
ssl_server_cert_store_type = property(get_ssl_server_cert_store_type, None)
Default Value
0
Remarks
This is the type of certificate store for this certificate.
The class supports both public and private keys in a variety of formats. When the cstAuto value is used, the class will automatically determine the type. This property can take one of the following values:
0 (cstUser - default) | For Windows, this specifies that the certificate store is a certificate store owned by the current user.
Note: This store type is not available in Java. |
1 (cstMachine) | For Windows, this specifies that the certificate store is a machine store.
Note: This store type is not available in Java. |
2 (cstPFXFile) | The certificate store is the name of a PFX (PKCS#12) file containing certificates. |
3 (cstPFXBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in PFX (PKCS#12) format. |
4 (cstJKSFile) | The certificate store is the name of a Java Key Store (JKS) file containing certificates.
Note: This store type is only available in Java. |
5 (cstJKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in Java Key Store (JKS) format.
Note: this store type is only available in Java. |
6 (cstPEMKeyFile) | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
7 (cstPEMKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a private key and an optional certificate. |
8 (cstPublicKeyFile) | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
9 (cstPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains a PEM- or DER-encoded public key certificate. |
10 (cstSSHPublicKeyBlob) | The certificate store is a string (binary or Base64-encoded) that contains an SSH-style public key. |
11 (cstP7BFile) | The certificate store is the name of a PKCS#7 file containing certificates. |
12 (cstP7BBlob) | The certificate store is a string (binary) representing a certificate store in PKCS#7 format. |
13 (cstSSHPublicKeyFile) | The certificate store is the name of a file that contains an SSH-style public key. |
14 (cstPPKFile) | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
15 (cstPPKBlob) | The certificate store is a string (binary) that contains a PPK (PuTTY Private Key). |
16 (cstXMLFile) | The certificate store is the name of a file that contains a certificate in XML format. |
17 (cstXMLBlob) | The certificate store is a string that contains a certificate in XML format. |
18 (cstJWKFile) | The certificate store is the name of a file that contains a JWK (JSON Web Key). |
19 (cstJWKBlob) | The certificate store is a string that contains a JWK (JSON Web Key). |
21 (cstBCFKSFile) | The certificate store is the name of a file that contains a BCFKS (Bouncy Castle FIPS Key Store).
Note: This store type is only available in Java and .NET. |
22 (cstBCFKSBlob) | The certificate store is a string (binary or Base64-encoded) representing a certificate store in BCFKS (Bouncy Castle FIPS Key Store) format.
Note: This store type is only available in Java and .NET. |
23 (cstPKCS11) | The certificate is present on a physical security key accessible via a PKCS#11 interface.
To use a security key, the necessary data must first be collected using the CertMgr class. The list_store_certificates method may be called after setting cert_store_type to cstPKCS11, cert_store_password to the PIN, and cert_store to the full path of the PKCS#11 DLL. The certificate information returned in the on_cert_list event's CertEncoded parameter may be saved for later use. When using a certificate, pass the previously saved security key information as the ssl_server_cert_store and set ssl_server_cert_store_password to the PIN. Code Example. SSH Authentication with Security Key:
|
99 (cstAuto) | The store type is automatically detected from the input data. This setting may be used with both public and private keys and can detect any of the supported formats automatically. |
This property is read-only.
ssl_server_cert_subject_alt_names Property
This property contains comma-separated lists of alternative subject names for the certificate.
Syntax
def get_ssl_server_cert_subject_alt_names() -> str: ...
ssl_server_cert_subject_alt_names = property(get_ssl_server_cert_subject_alt_names, None)
Default Value
""
Remarks
This property contains comma-separated lists of alternative subject names for the certificate.
This property is read-only.
ssl_server_cert_thumbprint_md5 Property
This property contains the MD5 hash of the certificate.
Syntax
def get_ssl_server_cert_thumbprint_md5() -> str: ...
ssl_server_cert_thumbprint_md5 = property(get_ssl_server_cert_thumbprint_md5, None)
Default Value
""
Remarks
This property contains the MD5 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
ssl_server_cert_thumbprint_sha1 Property
This property contains the SHA-1 hash of the certificate.
Syntax
def get_ssl_server_cert_thumbprint_sha1() -> str: ...
ssl_server_cert_thumbprint_sha1 = property(get_ssl_server_cert_thumbprint_sha1, None)
Default Value
""
Remarks
This property contains the SHA-1 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
ssl_server_cert_thumbprint_sha256 Property
This property contains the SHA-256 hash of the certificate.
Syntax
def get_ssl_server_cert_thumbprint_sha256() -> str: ...
ssl_server_cert_thumbprint_sha256 = property(get_ssl_server_cert_thumbprint_sha256, None)
Default Value
""
Remarks
This property contains the SHA-256 hash of the certificate. It is primarily used for X.509 certificates. If the hash does not already exist, it is automatically computed.
This property is read-only.
ssl_server_cert_usage Property
This property contains the text description of UsageFlags .
Syntax
def get_ssl_server_cert_usage() -> str: ...
ssl_server_cert_usage = property(get_ssl_server_cert_usage, None)
Default Value
""
Remarks
This property contains the text description of ssl_server_cert_usage_flags.
This value will be of one or more of the following strings and will be separated by commas:
- Digital Signature
- Non-Repudiation
- Key Encipherment
- Data Encipherment
- Key Agreement
- Certificate Signing
- CRL Signing
- Encipher Only
If the provider is OpenSSL, the value is a comma-separated list of X.509 certificate extension names.
This property is read-only.
ssl_server_cert_usage_flags Property
This property contains the flags that show intended use for the certificate.
Syntax
def get_ssl_server_cert_usage_flags() -> int: ...
ssl_server_cert_usage_flags = property(get_ssl_server_cert_usage_flags, None)
Default Value
0
Remarks
This property contains the flags that show intended use for the certificate. The value of ssl_server_cert_usage_flags is a combination of the following flags:
0x80 | Digital Signature |
0x40 | Non-Repudiation |
0x20 | Key Encipherment |
0x10 | Data Encipherment |
0x08 | Key Agreement |
0x04 | Certificate Signing |
0x02 | CRL Signing |
0x01 | Encipher Only |
Please see the ssl_server_cert_usage property for a text representation of ssl_server_cert_usage_flags.
This functionality currently is not available when the provider is OpenSSL.
This property is read-only.
ssl_server_cert_version Property
This property contains the certificate's version number.
Syntax
def get_ssl_server_cert_version() -> str: ...
ssl_server_cert_version = property(get_ssl_server_cert_version, None)
Default Value
""
Remarks
This property contains the certificate's version number. The possible values are the strings "V1", "V2", and "V3".
This property is read-only.
ssl_server_cert_subject Property
This is the subject of the certificate used for client authentication.
Syntax
def get_ssl_server_cert_subject() -> str: ...
ssl_server_cert_subject = property(get_ssl_server_cert_subject, None)
Default Value
""
Remarks
This is the subject of the certificate used for client authentication.
This property must be set after all other certificate properties are set. When this property is set, a search is performed in the current certificate store to locate a certificate with a matching subject.
If a matching certificate is found, the property is set to the full subject of the matching certificate.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks a random certificate in the certificate store.
The certificate subject is a comma-separated list of distinguished name fields and values. For instance, "CN=www.server.com, OU=test, C=US, E=support@nsoftware.com". Common fields and their meanings are as follows:
Field | Meaning |
CN | Common Name. This is commonly a hostname like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
This property is read-only.
ssl_server_cert_encoded Property
This is the certificate (PEM/Base64 encoded).
Syntax
def get_ssl_server_cert_encoded() -> bytes: ...
ssl_server_cert_encoded = property(get_ssl_server_cert_encoded, None)
Default Value
""
Remarks
This is the certificate (PEM/Base64 encoded). This property is used to assign a specific certificate. The ssl_server_cert_store and ssl_server_cert_subject properties also may be used to specify a certificate.
When ssl_server_cert_encoded is set, a search is initiated in the current ssl_server_cert_store for the private key of the certificate. If the key is found, ssl_server_cert_subject is updated to reflect the full subject of the selected certificate; otherwise, ssl_server_cert_subject is set to an empty string.
This property is read-only.
ssl_start_mode Property
This property determines how the class starts the Secure Sockets Layer (SSL) negotiation.
Syntax
def get_ssl_start_mode() -> int: ... def set_ssl_start_mode(value: int) -> None: ...
ssl_start_mode = property(get_ssl_start_mode, set_ssl_start_mode)
Default Value
3
Remarks
The ssl_start_mode property may have one of the following values:
0 (sslAutomatic) | If the remote port is set to the standard plaintext port of the protocol (where applicable), the class will behave the same as if ssl_start_mode is set to sslExplicit. In all other cases, SSL negotiation will be implicit (sslImplicit). |
1 (sslImplicit) | The SSL negotiation will start immediately after the connection is established. |
2 (sslExplicit) | The class will first connect in plaintext, and then will explicitly start SSL negotiation through a protocol command such as STARTTLS. |
3 (sslNone - default) | No SSL negotiation; no SSL security. All communication will be in plaintext mode. |
subject Property
This property includes the subject of the mail message (optional).
Syntax
def get_subject() -> str: ... def set_subject(value: str) -> None: ...
subject = property(get_subject, set_subject)
Default Value
""
Remarks
The string in this property is sent with a Subject SMTP header to the mail recipient.
If the resulting header is longer than MaxHeaderLength, then it is folded according to RFC 822 specifications.
timeout Property
This property includes the timeout for the class.
Syntax
def get_timeout() -> int: ... def set_timeout(value: int) -> None: ...
timeout = property(get_timeout, set_timeout)
Default Value
60
Remarks
If the timeout property is set to 0, all operations will run uninterrupted until successful completion or an error condition is encountered.
If timeout is set to a positive value, the class will wait for the operation to complete before returning control.
The class will use do_events to enter an efficient wait loop during any potential waiting period, making sure that all system events are processed immediately as they arrive. This ensures that the host application does not freeze and remains responsive.
If timeout expires, and the operation is not yet complete, the class fails with an error.
Note: By default, all timeouts are inactivity timeouts, that is, the timeout period is extended by timeout seconds when any amount of data is successfully sent or received.
The default value for the timeout property is 60 seconds.
user Property
This property includes the user identifier needed to log in as in the MailServer .
Syntax
def get_user() -> str: ... def set_user(value: str) -> None: ...
user = property(get_user, set_user)
Default Value
""
Remarks
If this property is set to a nonempty string, then when connecting to the mail_server an AUTH or CRAM-MD5 (depending on the value of auth_mechanism) command is sent to provide authentication information for the user.
add_attachment Method
This adds FileName as an attachment.
Syntax
def add_attachment(file_name: str) -> None: ...
Remarks
This method adds the file name as an attachment. The full list of attachments is contained in the attachments property.
Example 1: Adding an Attachment
component.AddAttachment("C:\file1.zip");
component.AddAttachment("C:\file2.zip");
component.Send();
Example 3: Using an Attachments Array
component.AttachmentCount = 1;
component.AttachmentName(0) = "name";
component.AttachmentFile(0) = "C:\file.txt";
config Method
Sets or retrieves a configuration setting.
Syntax
def config(configuration_string: str) -> str: ...
Remarks
config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
connect Method
This method connects to the mail relay and sends the SMTP HELO command.
Syntax
def connect() -> None: ...
Remarks
This method connects to the mail relay and sends the SMTP HELO command, thus preparing to send messages. Any number of messages can later be sent using the send method.
Example. Connecting and Sending an Email:
control.MailServer = "MyServer"
control.From = "me@server.com"
control.SendTo = "recipient@server.com"
control.Subject = "My Subject"
control.MessageText = "This is the message body"
control.Connect()
control.Send()
control.Disconnect()
disconnect Method
This method disconnects from the SMTP server.
Syntax
def disconnect() -> None: ...
Remarks
This method disconnects from the mail relay.
do_events Method
This method processes events from the internal message queue.
Syntax
def do_events() -> None: ...
Remarks
When do_events is called, the class processes any available events. If no events are available, it waits for a preset period of time, and then returns.
interrupt Method
This method interrupts the current method.
Syntax
def interrupt() -> None: ...
Remarks
If there is no method in progress, interrupt simply returns, doing nothing.
process_queue Method
This method sends the messages that previously have been queued into QueueDir .
Syntax
def process_queue(queue_dir: str) -> None: ...
Remarks
This method sends the messages that previously have been queued into QueueDir. The on_pi_trail event shows the interaction with the server as messages are processed.
This method looks in the directory for files with the extension ".queued" and starts processing them.
When processing starts, the file extension is changed to ".sending". If an error happens at this stage, the sending process is aborted, and the file extension is changed to ".failed".
If the file is successfully sent, the file is normally deleted, unless the KeepQueue configuration setting is set to True, in which case the file extension is instead changed to ".sent" and the queue file is not deleted.
queue Method
This method queues the message into QueueDir .
Syntax
def queue(queue_dir: str) -> str: ...
Remarks
This method queues the message into QueueDir. The message is queued into a unique file into the directory QueueDir for future processing.
QueueDir must already exist, or an error will be generated. Alternatively, QueueDir may be set to "*" to return the result as a string instead of writing it to a file.
This method returns the name of the unique queue file created in QueueDir. The file extension is ".queued".
Please refer to the process_queue method for more information on email queue processing.
reset Method
This method will reset the class.
Syntax
def reset() -> None: ...
Remarks
This method will reset the class's properties to their default values.
reset_headers Method
This method resets all the message headers to empty.
Syntax
def reset_headers() -> None: ...
Remarks
This method resets all the message headers to "" (empty string). Use this method before creating a new message, so that headers from the previous message are not carried over to the next one.
send Method
This sends the current message and the MIME-encoded attachment.
Syntax
def send() -> None: ...
Remarks
This method sends the current message and the MIME-encoded attachment. If the class is not connected to the mail relay, a connection is created, the message is sent, and then the connection is closed unless an error occurs.
If the class is already connected (by use of the connect method), the connection will remain open after the message is sent. To disconnect, call the disconnect method.
send_command Method
This method sends the exact command directly to the server.
Syntax
def send_command(command: str) -> None: ...
Remarks
This method sends the command specified by Command to the server exactly as it is provided. Use this method to send additional or custom commands directly to the server.
After calling this method, check the last_reply property or monitor the on_pi_trail event to obtain the server's response.
on_connection_status Event
This event is fired to indicate changes in the connection state.
Syntax
class FileMailerConnectionStatusEventParams(object): @property def connection_event() -> str: ... @property def status_code() -> int: ... @property def description() -> str: ... # In class FileMailer: @property def on_connection_status() -> Callable[[FileMailerConnectionStatusEventParams], None]: ... @on_connection_status.setter def on_connection_status(event_hook: Callable[[FileMailerConnectionStatusEventParams], None]) -> None: ...
Remarks
The on_connection_status event is fired when the connection state changes: for example, completion of a firewall or proxy connection or completion of a security handshake.
The ConnectionEvent parameter indicates the type of connection event. Values may include the following:
Firewall connection complete. | |
Secure Sockets Layer (SSL) or S/Shell handshake complete (where applicable). | |
Remote host connection complete. | |
Remote host disconnected. | |
SSL or S/Shell connection broken. | |
Firewall host disconnected. |
on_end_transfer Event
This event is fired when the message text completes transferring.
Syntax
class FileMailerEndTransferEventParams(object): @property def direction() -> int: ... # In class FileMailer: @property def on_end_transfer() -> Callable[[FileMailerEndTransferEventParams], None]: ... @on_end_transfer.setter def on_end_transfer(event_hook: Callable[[FileMailerEndTransferEventParams], None]) -> None: ...
Remarks
If message_text is not empty, the on_end_transfer event is fired when the message_text finishes transferring from the local host to the mail_server. If message_text is empty, the event is not fired.
If a file is attached to the message_text via the attached_file property, then on_end_transfer fires again when the file finishes transferring. For more information, go to the description of the attached_file property.
The Direction parameter shows whether the client (0) or the server (1) is sending the data.
on_error Event
Fired when information is available about errors during data delivery.
Syntax
class FileMailerErrorEventParams(object): @property def error_code() -> int: ... @property def description() -> str: ... # In class FileMailer: @property def on_error() -> Callable[[FileMailerErrorEventParams], None]: ... @on_error.setter def on_error(event_hook: Callable[[FileMailerErrorEventParams], None]) -> None: ...
Remarks
The on_error event is fired in case of exceptional conditions during message processing. Normally the class fails with an error.
The ErrorCode parameter contains an error code, and the Description parameter contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Error Codes section.
on_pi_trail Event
This event traces the commands sent to the mail server, and the respective replies.
Syntax
class FileMailerPITrailEventParams(object): @property def direction() -> int: ... @property def message() -> str: ... # In class FileMailer: @property def on_pi_trail() -> Callable[[FileMailerPITrailEventParams], None]: ... @on_pi_trail.setter def on_pi_trail(event_hook: Callable[[FileMailerPITrailEventParams], None]) -> None: ...
Remarks
The on_pi_trail event is useful for debugging purposes. It shows all of the interaction between the client and the server, line by line, except for message header and body transfers.
The Message parameter contains the full text of the message. The Direction parameter shows the originator of the message:
0 (Client) | The Message originates from the client. |
1 (Server) | The Message originates from the server. |
2 (Info) | The Message is an informative message originating from the client software (the class code). |
on_ssl_server_authentication Event
Fired after the server presents its certificate to the client.
Syntax
class FileMailerSSLServerAuthenticationEventParams(object): @property def cert_encoded() -> bytes: ... @property def cert_subject() -> str: ... @property def cert_issuer() -> str: ... @property def status() -> str: ... @property def accept() -> bool: ... @accept.setter def accept(value) -> None: ... # In class FileMailer: @property def on_ssl_server_authentication() -> Callable[[FileMailerSSLServerAuthenticationEventParams], None]: ... @on_ssl_server_authentication.setter def on_ssl_server_authentication(event_hook: Callable[[FileMailerSSLServerAuthenticationEventParams], None]) -> None: ...
Remarks
During this event, the client can decide whether or not to continue with the connection process. The Accept parameter is a recommendation on whether to continue or close the connection. This is just a suggestion: application software must use its own logic to determine whether or not to continue.
When Accept is False, Status shows why the verification failed (otherwise, Status contains the string OK). If it is decided to continue, you can override and accept the certificate by setting the Accept parameter to True.
on_ssl_status Event
Fired when secure connection progress messages are available.
Syntax
class FileMailerSSLStatusEventParams(object): @property def message() -> str: ... # In class FileMailer: @property def on_ssl_status() -> Callable[[FileMailerSSLStatusEventParams], None]: ... @on_ssl_status.setter def on_ssl_status(event_hook: Callable[[FileMailerSSLStatusEventParams], None]) -> None: ...
Remarks
The event is fired for informational and logging purposes only. This event tracks the progress of the connection.
on_start_transfer Event
This event is fired when the message text starts transferring.
Syntax
class FileMailerStartTransferEventParams(object): @property def direction() -> int: ... # In class FileMailer: @property def on_start_transfer() -> Callable[[FileMailerStartTransferEventParams], None]: ... @on_start_transfer.setter def on_start_transfer(event_hook: Callable[[FileMailerStartTransferEventParams], None]) -> None: ...
Remarks
If message_text is not empty, the on_start_transfer event is fired when the message_text starts transferring from the local host to the mail_server. If message_text is empty, the event is not fired.
If a file is attached to the message_text via the attached_file property, then on_start_transfer fires again when the file starts transferring. Please go to the description of the attached_file property for more information.
The Direction parameter shows whether the client (0) or the server (1) is sending the data.
on_transfer Event
This event is fired when the message text is transferred to MailServer .
Syntax
class FileMailerTransferEventParams(object): @property def direction() -> int: ... @property def bytes_transferred() -> int: ... @property def percent_done() -> int: ... @property def text() -> bytes: ... # In class FileMailer: @property def on_transfer() -> Callable[[FileMailerTransferEventParams], None]: ... @on_transfer.setter def on_transfer(event_hook: Callable[[FileMailerTransferEventParams], None]) -> None: ...
Remarks
One or more on_transfer events are fired during message delivery. Messages consist of message_text and an optional attached_file. The BytesTransferred parameter shows the number of bytes sent starting from the beginning of message_text or attached_file.
Text contains the current portion of the message being sent.
The Direction parameter shows whether the client (0) or the server (1) is sending the data.
The PercentDone parameter shows the progress of the transfer in the corresponding direction. If PercentDone can not be calculated the value will be -1.
Note: Events are not re-entrant. Performing time-consuming operations within this event will prevent it from firing again in a timely manner and may affect overall performance.
FileMailer Config Settings
The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.FileMailer Config Settings
0 | 7-bit |
1 | Quoted-Printable |
2 | Base64 |
3 | 8-bit |
0 | 7-bit |
1 | Quoted-Printable |
2 | Base64 |
3 | 8-bit |
SMTP Config Settings
Bearer ya29.AHES6ZRmS-8xPbpGetC1VbABJIBRdKm-c4X7wMVGAbgxdGt5q8Ts3Q
Note: When using amXOAUTH2, user must be specified, but password is not required.
If allow_extensions is True, the EHLO command will be sent instead of the HELO command.
It is generally a good idea to use a MaxHeaderLength of less than 100 bytes, although different mail relays and mail servers have different requirements for header lengths.
Example:
smtp1.Send();
string rawMsg = smtp1.Config("MessageHeadersString") + smtp1.Config("TransferText");
Possible values are as follows:
- "MD5"
- "SHA1" (default)
- "SHA256"
Example:
smtp1.Send();
string rawMsg = smtp1.Config("MessageHeadersString") + smtp1.Config("TransferText");
TCPClient Config Settings
If the FirewallHost setting is set to a Domain Name, a DNS request is initiated. Upon successful termination of the request, the FirewallHost setting is set to the corresponding address. If the search is not successful, an error is returned.
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This configuration setting is provided for use by classs that do not directly expose Firewall properties.
0 | No firewall (default setting). |
1 | Connect through a tunneling proxy. FirewallPort is set to 80. |
2 | Connect through a SOCKS4 Proxy. FirewallPort is set to 1080. |
3 | Connect through a SOCKS5 Proxy. FirewallPort is set to 1080. |
10 | Connect through a SOCKS4A Proxy. FirewallPort is set to 1080. |
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This setting is provided for use by classs that do not directly expose Firewall properties.
Note: This value is not applicable in macOS.
In the case that Linger is True (default), two scenarios determine how long the connection will linger. In the first, if LingerTime is 0 (default), the system will attempt to send pending data for a connection until the default IP timeout expires.
In the second scenario, if LingerTime is a positive value, the system will attempt to send pending data until the specified LingerTime is reached. If this attempt fails, then the system will reset the connection.
The default behavior (which is also the default mode for stream sockets) might result in a long delay in closing the connection. Although the class returns control immediately, the system could hold system resources until all pending data are sent (even after your application closes).
Setting this property to False forces an immediate disconnection. If you know that the other side has received all the data you sent (e.g., by a client acknowledgment), setting this property to False might be the appropriate course of action.
In multihomed hosts (machines with more than one IP interface), setting LocalHost to the value of an interface will make the class initiate connections (or accept in the case of server classs) only through that interface.
If the class is connected, the local_host setting shows the IP address of the interface through which the connection is made in internet dotted format (aaa.bbb.ccc.ddd). In most cases, this is the address of the local host, except for multihomed hosts (machines with more than one IP interface).
Setting this to 0 (default) enables the system to choose a port at random. The chosen port will be shown by local_port after the connection is established.
local_port cannot be changed once a connection is made. Any attempt to set this when a connection is active will generate an error.
This configuration setting is useful when trying to connect to services that require a trusted port on the client side. An example is the remote shell (rsh) service in UNIX systems.
If an eol string is found in the input stream before MaxLineLength bytes are received, the on_data_in event is fired with the EOL parameter set to True, and the buffer is reset.
If no eol is found, and MaxLineLength bytes are accumulated in the buffer, the on_data_in event is fired with the EOL parameter set to False, and the buffer is reset.
The minimum value for MaxLineLength is 256 bytes. The default value is 2048 bytes.
www.google.com;www.nsoftware.com
Note: This value is not applicable in Java.
By default, this configuration setting is set to False.
0 | IPv4 only |
1 | IPv6 only |
2 | IPv6 with IPv4 fallback |
SSL Config Settings
When enabled, SSL packet logs are output using the on_ssl_status event, which will fire each time an SSL packet is sent or received.
Enabling this configuration setting has no effect if ssl_provider is set to Platform.
The path set by this property should point to a directory containing CA certificates in PEM format. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g., 9d66eef0.0, 9d66eef0.1). OpenSSL recommends the use of the c_rehash utility to create the necessary links. Please refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.
The file set by this property should contain a list of CA certificates in PEM format. The file can contain several CA certificates identified by the following sequences:
-----BEGIN CERTIFICATE-----
... (CA certificate in base64 encoding) ...
-----END CERTIFICATE-----
Before, between, and after the certificate text is allowed, which can be used, for example, for descriptions of the certificates. Refer to the OpenSSL man page SSL_CTX_load_verify_locations(3) for details.
The format of this string is described in the OpenSSL man page ciphers(1) section "CIPHER LIST FORMAT". Please refer to it for details. The default string "DEFAULT" is determined at compile time and is normally equivalent to "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH".
By default, OpenSSL uses the device file "/dev/urandom" to seed the PRNG, and setting OpenSSLPrngSeedData is not required. If set, the string specified is used to seed the PRNG.
If set to True, the class will reuse the context if and only if the following criteria are met:
- The target host name is the same.
- The system cache entry has not expired (default timeout is 10 hours).
- The application process that calls the function is the same.
- The logon session is the same.
- The instance of the class is the same.
The value is formatted as a list of paths separated by semicolons. The class will check for the existence of each file in the order specified. When a file is found, the CA certificates within the file will be loaded and used to determine the validity of server or client certificates.
The default value is as follows:
/etc/ssl/ca-bundle.pem;/etc/pki/tls/certs/ca-bundle.crt;/etc/ssl/certs/ca-certificates.crt;/etc/pki/tls/cacert.pem
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermedaite Cert ... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert ... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE-----
When set to 0 (default), the CRL check will not be performed by the class. When set to 1, it will attempt to perform the CRL check, but it will continue without an error if the server's certificate does not support CRL. When set to 2, it will perform the CRL check and will throw an error if CRL is not supported.
This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.
When set to 0 (default), the class will not perform an OCSP check. When set to 1, it will attempt to perform the OCSP check, but it will continue without an error if the server's certificate does not support OCSP. When set to 2, it will perform the OCSP check and will throw an error if OCSP is not supported.
This configuration setting is supported only in the Java, C#, and C++ editions. In the C++ edition, it is supported only on Windows operating systems.
Note: This configuration setting contains the minimum cipher strength requested from the security library. The actual cipher strength used for the connection is shown by the on_ssl_status event.
Use this configuration setting with caution. Requesting a lower cipher strength than necessary could potentially cause serious security vulnerabilities in your application.
When the provider is OpenSSL, SSLCipherStrength is currently not supported. This functionality is instead made available through the OpenSSLCipherList configuration setting.
The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermediate Cert ... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert ... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE-----
By default, the enabled cipher suites will include all available ciphers ("*").
The special value "*" means that the class will pick all of the supported cipher suites. If SSLEnabledCipherSuites is set to any other value, only the specified cipher suites will be considered.
Multiple cipher suites are separated by semicolons.
Example values when ssl_provider is set to Platform include the following:
obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=CALG_AES_256");
obj.config("SSLEnabledCipherSuites=CALG_AES_256;CALG_3DES");
Possible values when ssl_provider is set to Platform include the following:
- CALG_3DES
- CALG_3DES_112
- CALG_AES
- CALG_AES_128
- CALG_AES_192
- CALG_AES_256
- CALG_AGREEDKEY_ANY
- CALG_CYLINK_MEK
- CALG_DES
- CALG_DESX
- CALG_DH_EPHEM
- CALG_DH_SF
- CALG_DSS_SIGN
- CALG_ECDH
- CALG_ECDH_EPHEM
- CALG_ECDSA
- CALG_ECMQV
- CALG_HASH_REPLACE_OWF
- CALG_HUGHES_MD5
- CALG_HMAC
- CALG_KEA_KEYX
- CALG_MAC
- CALG_MD2
- CALG_MD4
- CALG_MD5
- CALG_NO_SIGN
- CALG_OID_INFO_CNG_ONLY
- CALG_OID_INFO_PARAMETERS
- CALG_PCT1_MASTER
- CALG_RC2
- CALG_RC4
- CALG_RC5
- CALG_RSA_KEYX
- CALG_RSA_SIGN
- CALG_SCHANNEL_ENC_KEY
- CALG_SCHANNEL_MAC_KEY
- CALG_SCHANNEL_MASTER_HASH
- CALG_SEAL
- CALG_SHA
- CALG_SHA1
- CALG_SHA_256
- CALG_SHA_384
- CALG_SHA_512
- CALG_SKIPJACK
- CALG_SSL2_MASTER
- CALG_SSL3_MASTER
- CALG_SSL3_SHAMD5
- CALG_TEK
- CALG_TLS1_MASTER
- CALG_TLS1PRF
obj.config("SSLEnabledCipherSuites=*");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA");
obj.config("SSLEnabledCipherSuites=TLS_DHE_DSS_WITH_AES_128_CBC_SHA;TLS_ECDH_RSA_WITH_AES_128_CBC_SHA");
Possible values when ssl_provider is set to Internal include the following:
- TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
- TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
- TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
- TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
- TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
- TLS_RSA_WITH_AES_256_GCM_SHA384
- TLS_RSA_WITH_AES_128_GCM_SHA256
- TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
- TLS_DHE_DSS_WITH_AES_256_GCM_SHA384
- TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
- TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
- TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
- TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
- TLS_DHE_DSS_WITH_AES_128_GCM_SHA256
- TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
- TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
- TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
- TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
- TLS_RSA_WITH_AES_256_CBC_SHA256
- TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
- TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
- TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
- TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
- TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
- TLS_RSA_WITH_AES_128_CBC_SHA256
- TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
- TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
- TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
- TLS_RSA_WITH_AES_256_CBC_SHA
- TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
- TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
- TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
- TLS_DHE_RSA_WITH_AES_256_CBC_SHA
- TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
- TLS_DHE_DSS_WITH_AES_256_CBC_SHA
- TLS_RSA_WITH_AES_128_CBC_SHA
- TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
- TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
- TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
- TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
- TLS_DHE_RSA_WITH_AES_128_CBC_SHA
- TLS_DHE_DSS_WITH_AES_128_CBC_SHA
- TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
- TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
- TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
- TLS_RSA_WITH_3DES_EDE_CBC_SHA
- TLS_RSA_WITH_DES_CBC_SHA
- TLS_DHE_RSA_WITH_DES_CBC_SHA
- TLS_DHE_DSS_WITH_DES_CBC_SHA
- TLS_RSA_WITH_RC4_128_MD5
- TLS_RSA_WITH_RC4_128_SHA
When TLS 1.3 is negotiated (see SSLEnabledProtocols), only the following cipher suites are supported:
- TLS_AES_256_GCM_SHA384
- TLS_CHACHA20_POLY1305_SHA256
- TLS_AES_128_GCM_SHA256
SSLEnabledCipherSuites is used together with SSLCipherStrength.
Not all supported protocols are enabled by default. The default value is 4032 for client components, and 3072 for server components. To specify a combination of enabled protocol versions set this config to the binary OR of one or more of the following values:
TLS1.3 | 12288 (Hex 3000) |
TLS1.2 | 3072 (Hex C00) (Default - Client and Server) |
TLS1.1 | 768 (Hex 300) (Default - Client) |
TLS1 | 192 (Hex C0) (Default - Client) |
SSL3 | 48 (Hex 30) |
SSL2 | 12 (Hex 0C) |
Note that only TLS 1.2 is enabled for server components that accept incoming connections. This adheres to industry standards to ensure a secure connection. Client components enable TLS 1.0, TLS 1.1, and TLS 1.2 by default and will negotiate the highest mutually supported version when connecting to a server, which should be TLS 1.2 in most cases.
SSLEnabledProtocols: Transport Layer Security (TLS) 1.3 Notes:
By default when TLS 1.3 is enabled, the class will use the internal TLS implementation when the ssl_provider is set to Automatic for all editions.
In editions that are designed to run on Windows, ssl_provider can be set to Platform to use the platform implementation instead of the internal implementation. When configured in this manner, please note that the platform provider is supported only on Windows 11/Windows Server 2022 and up. The default internal provider is available on all platforms and is not restricted to any specific OS version.
If set to 1 (Platform provider), please be aware of the following notes:
- The platform provider is available only on Windows 11/Windows Server 2022 and up.
- SSLEnabledCipherSuites and other similar SSL configuration settings are not supported.
- If SSLEnabledProtocols includes both TLS 1.3 and TLS 1.2, these restrictions are still applicable even if TLS 1.2 is negotiated. Enabling TLS 1.3 with the platform provider changes the implementation used for all TLS versions.
SSLEnabledProtocols: SSL2 and SSL3 Notes:
SSL 2.0 and 3.0 are not supported by the class when the ssl_provider is set to internal. To use SSL 2.0 or SSL 3.0, the platform security API must have the protocols enabled and ssl_provider needs to be set to platform.
This configuration setting is applicable only when ssl_provider is set to Internal.
If set to True, all certificates returned by the server will be present in the Encoded parameter of the on_ssl_server_authentication event. This includes the leaf certificate, any intermediate certificate, and the root certificate.
When set, the class will save the session secrets in the same format as the SSLKEYLOGFILE environment variable functionality used by most major browsers and tools, such as Chrome, Firefox, and cURL. This file can then be used in tools such as Wireshark to decrypt TLS traffic for debugging purposes. When writing to this file, the class will only append, it will not overwrite previous values.
Note: This configuration setting is applicable only when ssl_provider is set to Internal.
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedCipher[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedCipherStrength[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedCipherSuite[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedKeyExchange[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedKeyExchangeStrength[connId]");
Note: For server components (e.g., TCPServer), this is a per-connection configuration setting accessed by passing the ConnectionId. For example:
server.Config("SSLNegotiatedVersion[connId]");
0x00000001 | Ignore time validity status of certificate. |
0x00000002 | Ignore time validity status of CTL. |
0x00000004 | Ignore non-nested certificate times. |
0x00000010 | Allow unknown certificate authority. |
0x00000020 | Ignore wrong certificate usage. |
0x00000100 | Ignore unknown certificate revocation status. |
0x00000200 | Ignore unknown CTL signer revocation status. |
0x00000400 | Ignore unknown certificate authority revocation status. |
0x00000800 | Ignore unknown root revocation status. |
0x00008000 | Allow test root certificate. |
0x00004000 | Trust test root certificate. |
0x80000000 | Ignore non-matching CN (certificate CN non-matching server name). |
This functionality is currently not available when the provider is OpenSSL.
The value of this configuration setting is a newline-separated (CR/LF) list of certificates. For instance:
-----BEGIN CERTIFICATE----- MIIEKzCCAxOgAwIBAgIRANTET4LIkxdH6P+CFIiHvTowDQYJKoZIhvcNAQELBQAw ... Intermediate Cert... eWHV5OW1K53o/atv59sOiW5K3crjFhsBOd5Q+cJJnU+SWinPKtANXMht+EDvYY2w F0I1XhM+pKj7FjDr+XNj -----END CERTIFICATE----- \r \n -----BEGIN CERTIFICATE----- MIIEFjCCAv6gAwIBAgIQetu1SMxpnENAnnOz1P+PtTANBgkqhkiG9w0BAQUFADBp ... Root Cert... d8q23djXZbVYiIfE9ebr4g3152BlVCHZ2GyPdjhIuLeH21VbT/dyEHHA -----END CERTIFICATE-----
When specified the class will verify that the server certificate signature algorithm is among the values specified in this configuration setting. If the server certificate signature algorithm is unsupported, the class fails with an error.
The format of this value is a comma-separated list of hash-signature combinations. For instance:
component.SSLProvider = TCPClientSSLProviders.sslpInternal;
component.Config("SSLEnabledProtocols=3072"); //TLS 1.2
component.Config("TLS12SignatureAlgorithms=sha256-rsa,sha256-dsa,sha1-rsa,sha1-dsa");
The default value for this configuration setting is sha512-ecdsa,sha512-rsa,sha512-dsa,sha384-ecdsa,sha384-rsa,sha384-dsa,sha256-ecdsa,sha256-rsa,sha256-dsa,sha224-ecdsa,sha224-rsa,sha224-dsa,sha1-ecdsa,sha1-rsa,sha1-dsa.
To not restrict the server's certificate signature algorithm, specify an empty string as the value for this configuration setting, which will cause the signature_algorithms TLS 1.2 extension to not be sent.
The default value is ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1.
When using TLS 1.2 and ssl_provider is set to Internal, the values refer to the supported groups for ECC. The following values are supported:
- "ecdhe_secp256r1" (default)
- "ecdhe_secp384r1" (default)
- "ecdhe_secp521r1" (default)
The default value is set to balance common supported groups and the computational resources required to generate key shares. As a result, only some groups are included by default in this configuration setting.
Note: All supported groups can always be used during the handshake even if not listed here, but if a group is used that is not present in this list, it will incur an additional roundtrip and time to generate the key share for that group.
In most cases, this configuration setting does not need to be modified. This should be modified only if there is a specific reason to do so.
The default value is ecdhe_x25519,ecdhe_secp256r1,ecdhe_secp384r1,ffdhe_2048,ffdhe_3072
The values are ordered from most preferred to least preferred. The following values are supported:
- "ecdhe_x25519" (default)
- "ecdhe_x448"
- "ecdhe_secp256r1" (default)
- "ecdhe_secp384r1" (default)
- "ecdhe_secp521r1"
- "ffdhe_2048" (default)
- "ffdhe_3072" (default)
- "ffdhe_4096"
- "ffdhe_6144"
- "ffdhe_8192"
- "ed25519" (default)
- "ed448" (default)
- "ecdsa_secp256r1_sha256" (default)
- "ecdsa_secp384r1_sha384" (default)
- "ecdsa_secp521r1_sha512" (default)
- "rsa_pkcs1_sha256" (default)
- "rsa_pkcs1_sha384" (default)
- "rsa_pkcs1_sha512" (default)
- "rsa_pss_sha256" (default)
- "rsa_pss_sha384" (default)
- "rsa_pss_sha512" (default)
The default value is ecdhe_x25519,ecdhe_x448,ecdhe_secp256r1,ecdhe_secp384r1,ecdhe_secp521r1,ffdhe_2048,ffdhe_3072,ffdhe_4096,ffdhe_6144,ffdhe_8192
The values are ordered from most preferred to least preferred. The following values are supported:
- "ecdhe_x25519" (default)
- "ecdhe_x448" (default)
- "ecdhe_secp256r1" (default)
- "ecdhe_secp384r1" (default)
- "ecdhe_secp521r1" (default)
- "ffdhe_2048" (default)
- "ffdhe_3072" (default)
- "ffdhe_4096" (default)
- "ffdhe_6144" (default)
- "ffdhe_8192" (default)
Socket Config Settings
Note: This option is not valid for User Datagram Protocol (UDP) ports.
Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the InBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.
Some TCP/IP implementations do not support variable buffer sizes. If that is the case, when the class is activated the OutBufferSize reverts to its defined size. The same happens if you attempt to make it too large or too small.
Base Config Settings
The following is a list of valid code page identifiers:
Identifier | Name |
037 | IBM EBCDIC - U.S./Canada |
437 | OEM - United States |
500 | IBM EBCDIC - International |
708 | Arabic - ASMO 708 |
709 | Arabic - ASMO 449+, BCON V4 |
710 | Arabic - Transparent Arabic |
720 | Arabic - Transparent ASMO |
737 | OEM - Greek (formerly 437G) |
775 | OEM - Baltic |
850 | OEM - Multilingual Latin I |
852 | OEM - Latin II |
855 | OEM - Cyrillic (primarily Russian) |
857 | OEM - Turkish |
858 | OEM - Multilingual Latin I + Euro symbol |
860 | OEM - Portuguese |
861 | OEM - Icelandic |
862 | OEM - Hebrew |
863 | OEM - Canadian-French |
864 | OEM - Arabic |
865 | OEM - Nordic |
866 | OEM - Russian |
869 | OEM - Modern Greek |
870 | IBM EBCDIC - Multilingual/ROECE (Latin-2) |
874 | ANSI/OEM - Thai (same as 28605, ISO 8859-15) |
875 | IBM EBCDIC - Modern Greek |
932 | ANSI/OEM - Japanese, Shift-JIS |
936 | ANSI/OEM - Simplified Chinese (PRC, Singapore) |
949 | ANSI/OEM - Korean (Unified Hangul Code) |
950 | ANSI/OEM - Traditional Chinese (Taiwan; Hong Kong SAR, PRC) |
1026 | IBM EBCDIC - Turkish (Latin-5) |
1047 | IBM EBCDIC - Latin 1/Open System |
1140 | IBM EBCDIC - U.S./Canada (037 + Euro symbol) |
1141 | IBM EBCDIC - Germany (20273 + Euro symbol) |
1142 | IBM EBCDIC - Denmark/Norway (20277 + Euro symbol) |
1143 | IBM EBCDIC - Finland/Sweden (20278 + Euro symbol) |
1144 | IBM EBCDIC - Italy (20280 + Euro symbol) |
1145 | IBM EBCDIC - Latin America/Spain (20284 + Euro symbol) |
1146 | IBM EBCDIC - United Kingdom (20285 + Euro symbol) |
1147 | IBM EBCDIC - France (20297 + Euro symbol) |
1148 | IBM EBCDIC - International (500 + Euro symbol) |
1149 | IBM EBCDIC - Icelandic (20871 + Euro symbol) |
1200 | Unicode UCS-2 Little-Endian (BMP of ISO 10646) |
1201 | Unicode UCS-2 Big-Endian |
1250 | ANSI - Central European |
1251 | ANSI - Cyrillic |
1252 | ANSI - Latin I |
1253 | ANSI - Greek |
1254 | ANSI - Turkish |
1255 | ANSI - Hebrew |
1256 | ANSI - Arabic |
1257 | ANSI - Baltic |
1258 | ANSI/OEM - Vietnamese |
1361 | Korean (Johab) |
10000 | MAC - Roman |
10001 | MAC - Japanese |
10002 | MAC - Traditional Chinese (Big5) |
10003 | MAC - Korean |
10004 | MAC - Arabic |
10005 | MAC - Hebrew |
10006 | MAC - Greek I |
10007 | MAC - Cyrillic |
10008 | MAC - Simplified Chinese (GB 2312) |
10010 | MAC - Romania |
10017 | MAC - Ukraine |
10021 | MAC - Thai |
10029 | MAC - Latin II |
10079 | MAC - Icelandic |
10081 | MAC - Turkish |
10082 | MAC - Croatia |
12000 | Unicode UCS-4 Little-Endian |
12001 | Unicode UCS-4 Big-Endian |
20000 | CNS - Taiwan |
20001 | TCA - Taiwan |
20002 | Eten - Taiwan |
20003 | IBM5550 - Taiwan |
20004 | TeleText - Taiwan |
20005 | Wang - Taiwan |
20105 | IA5 IRV International Alphabet No. 5 (7-bit) |
20106 | IA5 German (7-bit) |
20107 | IA5 Swedish (7-bit) |
20108 | IA5 Norwegian (7-bit) |
20127 | US-ASCII (7-bit) |
20261 | T.61 |
20269 | ISO 6937 Non-Spacing Accent |
20273 | IBM EBCDIC - Germany |
20277 | IBM EBCDIC - Denmark/Norway |
20278 | IBM EBCDIC - Finland/Sweden |
20280 | IBM EBCDIC - Italy |
20284 | IBM EBCDIC - Latin America/Spain |
20285 | IBM EBCDIC - United Kingdom |
20290 | IBM EBCDIC - Japanese Katakana Extended |
20297 | IBM EBCDIC - France |
20420 | IBM EBCDIC - Arabic |
20423 | IBM EBCDIC - Greek |
20424 | IBM EBCDIC - Hebrew |
20833 | IBM EBCDIC - Korean Extended |
20838 | IBM EBCDIC - Thai |
20866 | Russian - KOI8-R |
20871 | IBM EBCDIC - Icelandic |
20880 | IBM EBCDIC - Cyrillic (Russian) |
20905 | IBM EBCDIC - Turkish |
20924 | IBM EBCDIC - Latin-1/Open System (1047 + Euro symbol) |
20932 | JIS X 0208-1990 & 0121-1990 |
20936 | Simplified Chinese (GB2312) |
21025 | IBM EBCDIC - Cyrillic (Serbian, Bulgarian) |
21027 | Extended Alpha Lowercase |
21866 | Ukrainian (KOI8-U) |
28591 | ISO 8859-1 Latin I |
28592 | ISO 8859-2 Central Europe |
28593 | ISO 8859-3 Latin 3 |
28594 | ISO 8859-4 Baltic |
28595 | ISO 8859-5 Cyrillic |
28596 | ISO 8859-6 Arabic |
28597 | ISO 8859-7 Greek |
28598 | ISO 8859-8 Hebrew |
28599 | ISO 8859-9 Latin 5 |
28605 | ISO 8859-15 Latin 9 |
29001 | Europa 3 |
38598 | ISO 8859-8 Hebrew |
50220 | ISO 2022 Japanese with no halfwidth Katakana |
50221 | ISO 2022 Japanese with halfwidth Katakana |
50222 | ISO 2022 Japanese JIS X 0201-1989 |
50225 | ISO 2022 Korean |
50227 | ISO 2022 Simplified Chinese |
50229 | ISO 2022 Traditional Chinese |
50930 | Japanese (Katakana) Extended |
50931 | US/Canada and Japanese |
50933 | Korean Extended and Korean |
50935 | Simplified Chinese Extended and Simplified Chinese |
50936 | Simplified Chinese |
50937 | US/Canada and Traditional Chinese |
50939 | Japanese (Latin) Extended and Japanese |
51932 | EUC - Japanese |
51936 | EUC - Simplified Chinese |
51949 | EUC - Korean |
51950 | EUC - Traditional Chinese |
52936 | HZ-GB2312 Simplified Chinese |
54936 | Windows XP: GB18030 Simplified Chinese (4 Byte) |
57002 | ISCII Devanagari |
57003 | ISCII Bengali |
57004 | ISCII Tamil |
57005 | ISCII Telugu |
57006 | ISCII Assamese |
57007 | ISCII Oriya |
57008 | ISCII Kannada |
57009 | ISCII Malayalam |
57010 | ISCII Gujarati |
57011 | ISCII Punjabi |
65000 | Unicode UTF-7 |
65001 | Unicode UTF-8 |
Identifier | Name |
1 | ASCII |
2 | NEXTSTEP |
3 | JapaneseEUC |
4 | UTF8 |
5 | ISOLatin1 |
6 | Symbol |
7 | NonLossyASCII |
8 | ShiftJIS |
9 | ISOLatin2 |
10 | Unicode |
11 | WindowsCP1251 |
12 | WindowsCP1252 |
13 | WindowsCP1253 |
14 | WindowsCP1254 |
15 | WindowsCP1250 |
21 | ISO2022JP |
30 | MacOSRoman |
10 | UTF16String |
0x90000100 | UTF16BigEndian |
0x94000100 | UTF16LittleEndian |
0x8c000100 | UTF32String |
0x98000100 | UTF32BigEndian |
0x9c000100 | UTF32LittleEndian |
65536 | Proprietary |
- Product: The product the license is for.
- Product Key: The key the license was generated from.
- License Source: Where the license was found (e.g., RuntimeLicense, License File).
- License Type: The type of license installed (e.g., Royalty Free, Single Server).
- Last Valid Build: The last valid build number for which the license will work.
This setting only works on these classes: AS3Receiver, AS3Sender, Atom, Client(3DS), FTP, FTPServer, IMAP, OFTPClient, SSHClient, SCP, Server(3DS), Sexec, SFTP, SFTPServer, SSHServer, TCPClient, TCPServer.
Setting this configuration setting to True tells the class to use the internal implementation instead of using the system security libraries.
On Windows, this setting is set to False by default. On Linux/macOS, this setting is set to True by default.
To use the system security libraries for Linux, OpenSSL support must be enabled. For more information on how to enable OpenSSL, please refer to the OpenSSL Notes section.
FileMailer Errors
FileMailer Errors
169 | Invalid attachment index (out of range). |
170 | Cannot create temporary file. |
The class may also return one of the following error codes, which are inherited from other classes.
MIME Errors
3 | Can't create the file for write (illegal name or disk is write-protected). |
4 | Can't open the file for read (doesn't exist?). |
5 | Can't read from file. |
6 | Can't write to file (disk full?). |
280 | Invalid Part Index. |
281 | Unknown MIME type. |
282 | No MIME-boundary found. |
283 | No file given. |
284 | The class is busy. |
285 | Can't create a temporary file to decode the data. |
286 | Can't read message file. |
287 | No header separator found. |
289 | No separator found. |
290 | Input stream must have seeking enabled. |
SMTP Errors
118 | Firewall Error. Error message contains detailed description. |
161 | SMTP protocol error. Description contains the server reply. |
162 | Error communicating with server. Error text is attached. |
163 | Please specify a mail_server. |
164 | Please specify a sender (from_). |
165 | Please specify a recipient. |
166 | Busy executing current method. |
301 | Operation interrupted. |
302 | Cannot open attached_file. |
The class may also return one of the following error codes, which are inherited from other classes.
TCPClient Errors
100 | You cannot change the remote_port at this time. A connection is in progress. |
101 | You cannot change the remote_host (Server) at this time. A connection is in progress. |
102 | The remote_host address is invalid (0.0.0.0). |
104 | Already connected. If you want to reconnect, close the current connection first. |
106 | You cannot change the local_port at this time. A connection is in progress. |
107 | You cannot change the local_host at this time. A connection is in progress. |
112 | You cannot change MaxLineLength at this time. A connection is in progress. |
116 | remote_port cannot be zero. Please specify a valid service port number. |
117 | You cannot change the UseConnection option while the class is active. |
135 | Operation would block. |
201 | Timeout. |
211 | Action impossible in control's present state. |
212 | Action impossible while not connected. |
213 | Action impossible while listening. |
301 | Timeout. |
302 | Could not open file. |
434 | Unable to convert string to selected CodePage. |
1105 | Already connecting. If you want to reconnect, close the current connection first. |
1117 | You need to connect first. |
1119 | You cannot change the LocalHost at this time. A connection is in progress. |
1120 | Connection dropped by remote host. |
SSL Errors
270 | Cannot load specified security library. |
271 | Cannot open certificate store. |
272 | Cannot find specified certificate. |
273 | Cannot acquire security credentials. |
274 | Cannot find certificate chain. |
275 | Cannot verify certificate chain. |
276 | Error during handshake. |
280 | Error verifying certificate. |
281 | Could not find client certificate. |
282 | Could not find server certificate. |
283 | Error encrypting data. |
284 | Error decrypting data. |
TCP/IP Errors
10004 | [10004] Interrupted system call. |
10009 | [10009] Bad file number. |
10013 | [10013] Access denied. |
10014 | [10014] Bad address. |
10022 | [10022] Invalid argument. |
10024 | [10024] Too many open files. |
10035 | [10035] Operation would block. |
10036 | [10036] Operation now in progress. |
10037 | [10037] Operation already in progress. |
10038 | [10038] Socket operation on nonsocket. |
10039 | [10039] Destination address required. |
10040 | [10040] Message is too long. |
10041 | [10041] Protocol wrong type for socket. |
10042 | [10042] Bad protocol option. |
10043 | [10043] Protocol is not supported. |
10044 | [10044] Socket type is not supported. |
10045 | [10045] Operation is not supported on socket. |
10046 | [10046] Protocol family is not supported. |
10047 | [10047] Address family is not supported by protocol family. |
10048 | [10048] Address already in use. |
10049 | [10049] Cannot assign requested address. |
10050 | [10050] Network is down. |
10051 | [10051] Network is unreachable. |
10052 | [10052] Net dropped connection or reset. |
10053 | [10053] Software caused connection abort. |
10054 | [10054] Connection reset by peer. |
10055 | [10055] No buffer space available. |
10056 | [10056] Socket is already connected. |
10057 | [10057] Socket is not connected. |
10058 | [10058] Cannot send after socket shutdown. |
10059 | [10059] Too many references, cannot splice. |
10060 | [10060] Connection timed out. |
10061 | [10061] Connection refused. |
10062 | [10062] Too many levels of symbolic links. |
10063 | [10063] File name is too long. |
10064 | [10064] Host is down. |
10065 | [10065] No route to host. |
10066 | [10066] Directory is not empty |
10067 | [10067] Too many processes. |
10068 | [10068] Too many users. |
10069 | [10069] Disc Quota Exceeded. |
10070 | [10070] Stale NFS file handle. |
10071 | [10071] Too many levels of remote in path. |
10091 | [10091] Network subsystem is unavailable. |
10092 | [10092] WINSOCK DLL Version out of range. |
10093 | [10093] Winsock is not loaded yet. |
11001 | [11001] Host not found. |
11002 | [11002] Nonauthoritative 'Host not found' (try again or check DNS setup). |
11003 | [11003] Nonrecoverable errors: FORMERR, REFUSED, NOTIMP. |
11004 | [11004] Valid name, no data record (check DNS setup). |