Docs

SecureBlackbox 2022 macOS Edition

Version 22.0 [Build 8174]

ASiCSigner Module

Properties   Methods   Events   Configuration Settings   Errors  

The ASiCSigner module creates signature containers.

Syntax

SecureBlackbox.Asicsigner

Remarks

ASiCSigner provides functionality for creating Associated Signature Containers. ASiC containers are used to bind together signed objects and electronic signatures or timestamps.

ASiCSigner supports both ASiC-S (simple) and ASiC-E (extended) signature profiles, as well as the three types of signatures (CAdES, XAdES, and timestamps).

Property List


The following is the full list of the properties of the module with short descriptions. Click on the links for further details.

BlockedCertificatesThe certificates that must be rejected as trust anchors.
ChainValidationDetailsThe details of a certificate chain validation outcome.
ChainValidationResultThe general outcome of a certificate chain validation routine. Use ChainValidationDetails to get information about the reasons that contributed to the validation result.
ClaimedSigningTimeThe signing time from the signer's computer.
CurrentCACertificateThe CA of the currently processed certificate.
CurrentCertificateThe certificate that is currently being processed.
ExtendedSpecifies the type of ASiC signature.
ExternalCryptoProvides access to external signing and DC parameters.
FIPSModeReserved.
HashAlgorithmThe hash algorithm to be used in signature computation.
IgnoreChainValidationErrorsMakes the module tolerant to chain validation errors.
InputBytesUse this property to pass the input to module in the byte array form.
InputFileA path to the ASiC container to process.
InterimValidationDetailsContains the validation details of the moment.
InterimValidationResultContains the validation status of the moment.
KnownCertificatesAdditional certificates for chain validation.
KnownCRLsAdditional CRLs for chain validation.
KnownOCSPsAdditional OCSP responses for chain validation.
LevelSpecifies the level according to which the inner AdES signature is to be composed.
OfflineModeSwitches the module to the offline mode.
OutputBytesUse this property to read the output the module object has produced.
OutputFileThe file where the signed data will be saved.
PolicyHashThe signature policy hash value.
PolicyHashAlgorithmThe algorithm that was used to calculate the signature policy hash.
PolicyIDThe policy ID to be included into the signature.
PolicyURIThe signature policy URI to be included in the signature.
ProfileSpecifies a pre-defined profile to apply when creating the signature.
ProxyThe proxy server settings.
RevocationCheckSpecifies the kind(s) of revocation check to perform.
SignatureIndexThe index of the signature to update.
SignatureTypeSpecifies the kind of signature to be created.
SigningCertificateThe certificate to be used for signing.
SigningChainThe signing certificate chain.
SocketSettingsManages network connection settings.
SourceBytesUse this property to pass the content to sign in the byte array form.
SourceFilesThe files to be packed into the container.
SourceNameUse this property to specify the name of the file being signed if passing it via the SourceBytes property.
TimestampServerThe address of the timestamping server.
TLSClientChainThe TLS client certificate chain.
TLSServerChainThe TLS server's certificate chain.
TLSSettingsManages TLS layer settings.
TrustedCertificatesA list of trusted certificates for chain validation.
ValidationLogContains the complete log of the certificate validation routine.

Method List


The following is the full list of the methods of the module with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting.
DoActionPerforms an additional action.
ExtractAsyncDataExtracts user data from the DC signing service response.
SignSigns the chosen files and packs them into an ASiC archive.
SignAsyncBeginInitiates the asynchronous signing operation.
SignAsyncEndCompletes the asynchronous signing operation.
SignExternalSigns the document using an external signing facility.
TimestampUse this method to add timestamp.
UpgradeUpgrades existing CAdES or XAdES signature to a new level.

Event List


The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.

ChainElementDownloadTBD.
ChainElementNeededTBD.
ErrorInformation about any errors that occur during signing or archiving.
ExternalSignHandles remote or external signing initiated by the SignExternal method or other source.
NotificationThis event notifies the application about an underlying control flow event.
StoreCertificateThis event is fired when a certificate should be stored along with a signature.
StoreCRLThis event is fired when a CRL should be stored along with a signature.
StoreOCSPResponseThis event is fired when a OCSP Response should be stored along with a signature.
TLSCertValidateThis event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
ValidationProgressTBD.

Configuration Settings


The following is a list of configuration settings for the module with short descriptions. Click on the links for further details.

ASiCOptionsSpecifies the ASiC options.
CmsOptAnnexKArchiveTimestampV2ModeToggles use of Annex K method of calculating validation timestamp hashes.
CmsOptCheckATSHashIndexElementsEnables extra checks when processing ATSHashIndex attribute.
CmsOptCompareRDNAsStringsEnforces comparison of RDN elements as text strings, rather than their byte encodings.
CmsOptDigitPADSSCompatibilityEnables Digit PADSS compatibility mode.
CmsOptForceSigningCertificateV2UsageEnforces use of signing-certificate-v2 attribute.
CmsOptIgnoreDERReqInArchiveTimestampsSwitches off DER encoding requirement for archival timestamps.
CmsOptImzagerMIMCompatibilityEnables Imzager MIM compatibility mode.
CmsOptIncludeCertToAttributesRegulates whether to include the signing certificate to the signature as the signing-certificate attribute.
CmsOptIncludeCertToMessageRegulates whether to include the signing certificate and its chain to the CMS.
CmsOptInsertContentTypeRegulates whether the content-type time attribute should be included in the signature structure.
CmsOptInsertMessageDigestsRegulates whether the message-digest signed attribute should be included in the signature structure.
CmsOptInsertSigningTimeRegulates whether the signing-time attribute should be included in the signature structure.
CmsOptSkipEnvContentInfoOnSigArchivalExcludes hashing of enveloped content when calculating an archival timestamp.
CmsOptUseATSHashIndexV1Enables use of ATSHashIndexV1 attribute.
CmsOptUseGeneralizedTimeFormatEnables or disables encoding of the signing-time attribute using ASN.1 GENERALIZEDTIME type.
CmsOptUseGenericSigAlgorithmOIDsEnables use of generic signature algorithm OIDs in the signature.
CmsOptUsePlainContentForTimestampHashesMakes CAdESSigner ignore ASN.1 content formatting when calculating timestamp hashes.
ContentTypeSpecifies the content-type of the container.
ForceCompleteChainValidationWhether to check the CA certificates when the signing certificate is invalid.
ForceCompleteChainValidationForTrustedWhether to continue with the full validation up to the root CA certificate for mid-level trust anchors.
GenerateMetaInfEntrySpecifies whether the directory META-INF entry should be generated.
GracePeriodSpecifies a grace period to apply during revocation information checks.
IgnoreChainValidationErrorsWhether to ignore any certificate chain validation issues.
IgnoreOCSPNoCheckExtensionWhether OCSP NoCheck extension should be ignored.
IgnoreSystemTrustWhether trusted Windows Certificate Stores should be treated as trusted.
ImplicitlyTrustSelfSignedCertificatesWhether to trust self-signed certificates.
PolicyExplicitTextThe explicit text of the user notice.
PolicyUNNumbersThe noticeNumbers part of the NoticeReference CAdES or XAdES attribute.
PolicyUNOrganizationThe organization part of the NoticeReference qualifier.
ProductionPlaceThe value to store in the ProductionPlace XAdES attribute.
PromoteLongOCSPResponsesWhether long OCSP responses are requested.
RefHashAlgorithmSpecifies the hash algorithm for references.
RefMimeTypeSpecifies the MIME type to apply to the processed file.
TempPathPath for storing temporary files.
TimestampResponseA base16-encoded timestamp response received from a TSA.
TLSChainValidationDetailsContains the advanced details of the TLS server certificate validation.
TLSChainValidationResultContains the result of the TLS server certificate validation.
TLSClientAuthRequestedIndicates whether the TLS server requests client authentication.
TLSValidationLogContains the log of the TLS server certificate validation.
TolerateMinorChainIssuesWhether to tolerate minor chain issues.
UseMicrosoftCTLEnables or disables automatic use of Microsoft online certificate trust list.
UseSystemCertificatesEnables or disables the use of the system certificates.
UseUTF8FilenamesSpecifies whether to use UTF-8 filenames.
CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the module (supported for HTTPClient, RESTClient and SOAPClient only).
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
TagAllows to store any custom data.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

BlockedCertificates Property (ASiCSigner Module)

The certificates that must be rejected as trust anchors.

Syntax

public var blockedCertificates: Array<Certificate> {

get {...} }

@property (nonatomic,readwrite,assign,getter=blockedCertCount,setter=setBlockedCertCount:) int blockedCertCount;

- (int)blockedCertCount;
- (void)setBlockedCertCount :(int)newBlockedCertCount;

- (NSData*)blockedCertBytes:(int)blockedCertIndex;

- (long long)blockedCertHandle:(int)blockedCertIndex;
- (void)setBlockedCertHandle:(int)blockedCertIndex :(long long)newBlockedCertHandle;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

ChainValidationDetails Property (ASiCSigner Module)

The details of a certificate chain validation outcome.

Syntax

public var chainValidationDetails: Int32 {

get {...} }

@property (nonatomic,readonly,assign,getter=chainValidationDetails) int chainValidationDetails;

- (int)chainValidationDetails;

Default Value

0

Remarks

Use the value(s) returned by this property to identify the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

This property is read-only.

ChainValidationResult Property (ASiCSigner Module)

The general outcome of a certificate chain validation routine. Use ChainValidationDetails to get information about the reasons that contributed to the validation result.

Syntax

public var chainValidationResult: AsicsignerChainValidationResults {

get {...} }

public enum AsicsignerChainValidationResults: Int32 { case cvtValid = 0 case cvtValidButUntrusted = 1 case cvtInvalid = 2 case cvtCantBeEstablished = 3 }

@property (nonatomic,readonly,assign,getter=chainValidationResult) int chainValidationResult;

- (int)chainValidationResult;

Default Value

0

Remarks

Available options:

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

This property is read-only.

ClaimedSigningTime Property (ASiCSigner Module)

The signing time from the signer's computer.

Syntax

public var claimedSigningTime: String {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=claimedSigningTime,setter=setClaimedSigningTime:) NSString* claimedSigningTime;

- (NSString*)claimedSigningTime;
- (void)setClaimedSigningTime :(NSString*)newClaimedSigningTime;

Default Value

""

Remarks

Use this property to provide the signature production time. The claimed time is not supported by a trusted source; it may be inaccurate, forfeited, or wrong, and as such is usually taken for informational purposes only by verifiers. Use timestamp servers to embed verifiable trusted timestamps. The time is in UTC.

CurrentCACertificate Property (ASiCSigner Module)

The CA of the currently processed certificate.

Syntax

public var currentCACertificate: Certificate {

get {...} }

@property (nonatomic,readonly,assign,getter=currentCACertBytes) NSData* currentCACertBytes;

- (NSData*)currentCACertBytes;

@property (nonatomic,readonly,assign,getter=currentCACertCA) BOOL currentCACertCA;

- (BOOL)currentCACertCA;

@property (nonatomic,readonly,assign,getter=currentCACertCAKeyID) NSData* currentCACertCAKeyID;

- (NSData*)currentCACertCAKeyID;

@property (nonatomic,readonly,assign,getter=currentCACertCRLDistributionPoints) NSString* currentCACertCRLDistributionPoints;

- (NSString*)currentCACertCRLDistributionPoints;

@property (nonatomic,readonly,assign,getter=currentCACertCurve) NSString* currentCACertCurve;

- (NSString*)currentCACertCurve;

@property (nonatomic,readonly,assign,getter=currentCACertFingerprint) NSData* currentCACertFingerprint;

- (NSData*)currentCACertFingerprint;

@property (nonatomic,readonly,assign,getter=currentCACertFriendlyName) NSString* currentCACertFriendlyName;

- (NSString*)currentCACertFriendlyName;

@property (nonatomic,readonly,assign,getter=currentCACertHandle) long long currentCACertHandle;

- (long long)currentCACertHandle;

@property (nonatomic,readonly,assign,getter=currentCACertHashAlgorithm) NSString* currentCACertHashAlgorithm;

- (NSString*)currentCACertHashAlgorithm;

@property (nonatomic,readonly,assign,getter=currentCACertIssuer) NSString* currentCACertIssuer;

- (NSString*)currentCACertIssuer;

@property (nonatomic,readonly,assign,getter=currentCACertIssuerRDN) NSString* currentCACertIssuerRDN;

- (NSString*)currentCACertIssuerRDN;

@property (nonatomic,readonly,assign,getter=currentCACertKeyAlgorithm) NSString* currentCACertKeyAlgorithm;

- (NSString*)currentCACertKeyAlgorithm;

@property (nonatomic,readonly,assign,getter=currentCACertKeyBits) int currentCACertKeyBits;

- (int)currentCACertKeyBits;

@property (nonatomic,readonly,assign,getter=currentCACertKeyFingerprint) NSData* currentCACertKeyFingerprint;

- (NSData*)currentCACertKeyFingerprint;

@property (nonatomic,readonly,assign,getter=currentCACertKeyUsage) int currentCACertKeyUsage;

- (int)currentCACertKeyUsage;

@property (nonatomic,readonly,assign,getter=currentCACertKeyValid) BOOL currentCACertKeyValid;

- (BOOL)currentCACertKeyValid;

@property (nonatomic,readonly,assign,getter=currentCACertOCSPLocations) NSString* currentCACertOCSPLocations;

- (NSString*)currentCACertOCSPLocations;

@property (nonatomic,readonly,assign,getter=currentCACertOCSPNoCheck) BOOL currentCACertOCSPNoCheck;

- (BOOL)currentCACertOCSPNoCheck;

@property (nonatomic,readonly,assign,getter=currentCACertOrigin) int currentCACertOrigin;

- (int)currentCACertOrigin;

@property (nonatomic,readonly,assign,getter=currentCACertPolicyIDs) NSString* currentCACertPolicyIDs;

- (NSString*)currentCACertPolicyIDs;

@property (nonatomic,readonly,assign,getter=currentCACertPrivateKeyBytes) NSData* currentCACertPrivateKeyBytes;

- (NSData*)currentCACertPrivateKeyBytes;

@property (nonatomic,readonly,assign,getter=currentCACertPrivateKeyExists) BOOL currentCACertPrivateKeyExists;

- (BOOL)currentCACertPrivateKeyExists;

@property (nonatomic,readonly,assign,getter=currentCACertPrivateKeyExtractable) BOOL currentCACertPrivateKeyExtractable;

- (BOOL)currentCACertPrivateKeyExtractable;

@property (nonatomic,readonly,assign,getter=currentCACertPublicKeyBytes) NSData* currentCACertPublicKeyBytes;

- (NSData*)currentCACertPublicKeyBytes;

@property (nonatomic,readonly,assign,getter=currentCACertQualifiedStatements) int currentCACertQualifiedStatements;

- (int)currentCACertQualifiedStatements;

@property (nonatomic,readonly,assign,getter=currentCACertSelfSigned) BOOL currentCACertSelfSigned;

- (BOOL)currentCACertSelfSigned;

@property (nonatomic,readonly,assign,getter=currentCACertSerialNumber) NSData* currentCACertSerialNumber;

- (NSData*)currentCACertSerialNumber;

@property (nonatomic,readonly,assign,getter=currentCACertSigAlgorithm) NSString* currentCACertSigAlgorithm;

- (NSString*)currentCACertSigAlgorithm;

@property (nonatomic,readonly,assign,getter=currentCACertSubject) NSString* currentCACertSubject;

- (NSString*)currentCACertSubject;

@property (nonatomic,readonly,assign,getter=currentCACertSubjectAlternativeName) NSString* currentCACertSubjectAlternativeName;

- (NSString*)currentCACertSubjectAlternativeName;

@property (nonatomic,readonly,assign,getter=currentCACertSubjectKeyID) NSData* currentCACertSubjectKeyID;

- (NSData*)currentCACertSubjectKeyID;

@property (nonatomic,readonly,assign,getter=currentCACertSubjectRDN) NSString* currentCACertSubjectRDN;

- (NSString*)currentCACertSubjectRDN;

@property (nonatomic,readonly,assign,getter=currentCACertValidFrom) NSString* currentCACertValidFrom;

- (NSString*)currentCACertValidFrom;

@property (nonatomic,readonly,assign,getter=currentCACertValidTo) NSString* currentCACertValidTo;

- (NSString*)currentCACertValidTo;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

CurrentCertificate Property (ASiCSigner Module)

The certificate that is currently being processed.

Syntax

public var currentCertificate: Certificate {

get {...} }

@property (nonatomic,readonly,assign,getter=currentCertBytes) NSData* currentCertBytes;

- (NSData*)currentCertBytes;

@property (nonatomic,readonly,assign,getter=currentCertCA) BOOL currentCertCA;

- (BOOL)currentCertCA;

@property (nonatomic,readonly,assign,getter=currentCertCAKeyID) NSData* currentCertCAKeyID;

- (NSData*)currentCertCAKeyID;

@property (nonatomic,readonly,assign,getter=currentCertCRLDistributionPoints) NSString* currentCertCRLDistributionPoints;

- (NSString*)currentCertCRLDistributionPoints;

@property (nonatomic,readonly,assign,getter=currentCertCurve) NSString* currentCertCurve;

- (NSString*)currentCertCurve;

@property (nonatomic,readonly,assign,getter=currentCertFingerprint) NSData* currentCertFingerprint;

- (NSData*)currentCertFingerprint;

@property (nonatomic,readonly,assign,getter=currentCertFriendlyName) NSString* currentCertFriendlyName;

- (NSString*)currentCertFriendlyName;

@property (nonatomic,readonly,assign,getter=currentCertHandle) long long currentCertHandle;

- (long long)currentCertHandle;

@property (nonatomic,readonly,assign,getter=currentCertHashAlgorithm) NSString* currentCertHashAlgorithm;

- (NSString*)currentCertHashAlgorithm;

@property (nonatomic,readonly,assign,getter=currentCertIssuer) NSString* currentCertIssuer;

- (NSString*)currentCertIssuer;

@property (nonatomic,readonly,assign,getter=currentCertIssuerRDN) NSString* currentCertIssuerRDN;

- (NSString*)currentCertIssuerRDN;

@property (nonatomic,readonly,assign,getter=currentCertKeyAlgorithm) NSString* currentCertKeyAlgorithm;

- (NSString*)currentCertKeyAlgorithm;

@property (nonatomic,readonly,assign,getter=currentCertKeyBits) int currentCertKeyBits;

- (int)currentCertKeyBits;

@property (nonatomic,readonly,assign,getter=currentCertKeyFingerprint) NSData* currentCertKeyFingerprint;

- (NSData*)currentCertKeyFingerprint;

@property (nonatomic,readonly,assign,getter=currentCertKeyUsage) int currentCertKeyUsage;

- (int)currentCertKeyUsage;

@property (nonatomic,readonly,assign,getter=currentCertKeyValid) BOOL currentCertKeyValid;

- (BOOL)currentCertKeyValid;

@property (nonatomic,readonly,assign,getter=currentCertOCSPLocations) NSString* currentCertOCSPLocations;

- (NSString*)currentCertOCSPLocations;

@property (nonatomic,readonly,assign,getter=currentCertOCSPNoCheck) BOOL currentCertOCSPNoCheck;

- (BOOL)currentCertOCSPNoCheck;

@property (nonatomic,readonly,assign,getter=currentCertOrigin) int currentCertOrigin;

- (int)currentCertOrigin;

@property (nonatomic,readonly,assign,getter=currentCertPolicyIDs) NSString* currentCertPolicyIDs;

- (NSString*)currentCertPolicyIDs;

@property (nonatomic,readonly,assign,getter=currentCertPrivateKeyBytes) NSData* currentCertPrivateKeyBytes;

- (NSData*)currentCertPrivateKeyBytes;

@property (nonatomic,readonly,assign,getter=currentCertPrivateKeyExists) BOOL currentCertPrivateKeyExists;

- (BOOL)currentCertPrivateKeyExists;

@property (nonatomic,readonly,assign,getter=currentCertPrivateKeyExtractable) BOOL currentCertPrivateKeyExtractable;

- (BOOL)currentCertPrivateKeyExtractable;

@property (nonatomic,readonly,assign,getter=currentCertPublicKeyBytes) NSData* currentCertPublicKeyBytes;

- (NSData*)currentCertPublicKeyBytes;

@property (nonatomic,readonly,assign,getter=currentCertQualifiedStatements) int currentCertQualifiedStatements;

- (int)currentCertQualifiedStatements;

@property (nonatomic,readonly,assign,getter=currentCertSelfSigned) BOOL currentCertSelfSigned;

- (BOOL)currentCertSelfSigned;

@property (nonatomic,readonly,assign,getter=currentCertSerialNumber) NSData* currentCertSerialNumber;

- (NSData*)currentCertSerialNumber;

@property (nonatomic,readonly,assign,getter=currentCertSigAlgorithm) NSString* currentCertSigAlgorithm;

- (NSString*)currentCertSigAlgorithm;

@property (nonatomic,readonly,assign,getter=currentCertSubject) NSString* currentCertSubject;

- (NSString*)currentCertSubject;

@property (nonatomic,readonly,assign,getter=currentCertSubjectAlternativeName) NSString* currentCertSubjectAlternativeName;

- (NSString*)currentCertSubjectAlternativeName;

@property (nonatomic,readonly,assign,getter=currentCertSubjectKeyID) NSData* currentCertSubjectKeyID;

- (NSData*)currentCertSubjectKeyID;

@property (nonatomic,readonly,assign,getter=currentCertSubjectRDN) NSString* currentCertSubjectRDN;

- (NSString*)currentCertSubjectRDN;

@property (nonatomic,readonly,assign,getter=currentCertValidFrom) NSString* currentCertValidFrom;

- (NSString*)currentCertValidFrom;

@property (nonatomic,readonly,assign,getter=currentCertValidTo) NSString* currentCertValidTo;

- (NSString*)currentCertValidTo;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

Extended Property (ASiCSigner Module)

Specifies the type of ASiC signature.

Syntax

public var extended: Bool {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=extended,setter=setExtended:) BOOL extended;

- (BOOL)extended;
- (void)setExtended :(BOOL)newExtended;

Default Value

False

Remarks

A simple signature container (ASiC-S) can only be made over a single document, and use one signature format (a CAdES signature, a XAdES signature, or a timestamp)

An extended container (ASiC-E) can cover multiple documents and contain multiple signatures of different types. Set this property to true to create an extended ASiC container.

ExternalCrypto Property (ASiCSigner Module)

Provides access to external signing and DC parameters.

Syntax

public var externalCrypto: ExternalCrypto {

get {...} }

@property (nonatomic,readwrite,assign,getter=externalCryptoAsyncDocumentID,setter=setExternalCryptoAsyncDocumentID:) NSString* externalCryptoAsyncDocumentID;

- (NSString*)externalCryptoAsyncDocumentID;
- (void)setExternalCryptoAsyncDocumentID :(NSString*)newExternalCryptoAsyncDocumentID;

@property (nonatomic,readwrite,assign,getter=externalCryptoCustomParams,setter=setExternalCryptoCustomParams:) NSString* externalCryptoCustomParams;

- (NSString*)externalCryptoCustomParams;
- (void)setExternalCryptoCustomParams :(NSString*)newExternalCryptoCustomParams;

@property (nonatomic,readwrite,assign,getter=externalCryptoData,setter=setExternalCryptoData:) NSString* externalCryptoData;

- (NSString*)externalCryptoData;
- (void)setExternalCryptoData :(NSString*)newExternalCryptoData;

@property (nonatomic,readwrite,assign,getter=externalCryptoExternalHashCalculation,setter=setExternalCryptoExternalHashCalculation:) BOOL externalCryptoExternalHashCalculation;

- (BOOL)externalCryptoExternalHashCalculation;
- (void)setExternalCryptoExternalHashCalculation :(BOOL)newExternalCryptoExternalHashCalculation;

@property (nonatomic,readwrite,assign,getter=externalCryptoHashAlgorithm,setter=setExternalCryptoHashAlgorithm:) NSString* externalCryptoHashAlgorithm;

- (NSString*)externalCryptoHashAlgorithm;
- (void)setExternalCryptoHashAlgorithm :(NSString*)newExternalCryptoHashAlgorithm;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeyID,setter=setExternalCryptoKeyID:) NSString* externalCryptoKeyID;

- (NSString*)externalCryptoKeyID;
- (void)setExternalCryptoKeyID :(NSString*)newExternalCryptoKeyID;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeySecret,setter=setExternalCryptoKeySecret:) NSString* externalCryptoKeySecret;

- (NSString*)externalCryptoKeySecret;
- (void)setExternalCryptoKeySecret :(NSString*)newExternalCryptoKeySecret;

@property (nonatomic,readwrite,assign,getter=externalCryptoMethod,setter=setExternalCryptoMethod:) int externalCryptoMethod;

- (int)externalCryptoMethod;
- (void)setExternalCryptoMethod :(int)newExternalCryptoMethod;

@property (nonatomic,readwrite,assign,getter=externalCryptoMode,setter=setExternalCryptoMode:) int externalCryptoMode;

- (int)externalCryptoMode;
- (void)setExternalCryptoMode :(int)newExternalCryptoMode;

@property (nonatomic,readwrite,assign,getter=externalCryptoPublicKeyAlgorithm,setter=setExternalCryptoPublicKeyAlgorithm:) NSString* externalCryptoPublicKeyAlgorithm;

- (NSString*)externalCryptoPublicKeyAlgorithm;
- (void)setExternalCryptoPublicKeyAlgorithm :(NSString*)newExternalCryptoPublicKeyAlgorithm;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

FIPSMode Property (ASiCSigner Module)

Reserved.

Syntax

public var fipsMode: Bool {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=FIPSMode,setter=setFIPSMode:) BOOL FIPSMode;

- (BOOL)FIPSMode;
- (void)setFIPSMode :(BOOL)newFIPSMode;

Default Value

False

Remarks

This property is reserved for future use.

HashAlgorithm Property (ASiCSigner Module)

The hash algorithm to be used in signature computation.

Syntax

public var hashAlgorithm: String {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=hashAlgorithm,setter=setHashAlgorithm:) NSString* hashAlgorithm;

- (NSString*)hashAlgorithm;
- (void)setHashAlgorithm :(NSString*)newHashAlgorithm;

Default Value

"SHA256"

Remarks

Use this property to specify the hash algorithm to be used for the signing. The specified hash algorithm applies both to the actual signing and any related operations, such as timestamping.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

IgnoreChainValidationErrors Property (ASiCSigner Module)

Makes the module tolerant to chain validation errors.

Syntax

public var ignoreChainValidationErrors: Bool {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=ignoreChainValidationErrors,setter=setIgnoreChainValidationErrors:) BOOL ignoreChainValidationErrors;

- (BOOL)ignoreChainValidationErrors;
- (void)setIgnoreChainValidationErrors :(BOOL)newIgnoreChainValidationErrors;

Default Value

False

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

InputBytes Property (ASiCSigner Module)

Use this property to pass the input to module in the byte array form.

Syntax

public var inputBytes: Data {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=inputBytes,setter=setInputBytes:) NSData* inputBytes;

- (NSData*)inputBytes;
- (void)setInputBytes :(NSData*)newInputBytes;

Remarks

Assign a byte array containing the data to be processed to this property.

InputFile Property (ASiCSigner Module)

A path to the ASiC container to process.

Syntax

public var inputFile: String {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=inputFile,setter=setInputFile:) NSString* inputFile;

- (NSString*)inputFile;
- (void)setInputFile :(NSString*)newInputFile;

Default Value

""

Remarks

Use this property to provide a path to the ASiC container. Use InputStream to provide the container from memory rather than a disk file.

InterimValidationDetails Property (ASiCSigner Module)

Contains the validation details of the moment.

Syntax

public var interimValidationDetails: Int32 {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=interimValidationDetails,setter=setInterimValidationDetails:) int interimValidationDetails;

- (int)interimValidationDetails;
- (void)setInterimValidationDetails :(int)newInterimValidationDetails;

Default Value

0

Remarks

Over the course of the validation process, the validator maintains an interim validity status for the chain that is being processed. This status is influenced by every single step of the validation routine, and may change along the way, before the end of the chain is reached and the final validation conclusion is drawn.

Use this property to check the interim validity details mid-flight.

The value of this property is a bit mask of the following options:

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

InterimValidationResult Property (ASiCSigner Module)

Contains the validation status of the moment.

Syntax

public var interimValidationResult: AsicsignerInterimValidationResults {

get {...}
set {...} }

public enum AsicsignerInterimValidationResults: Int32 { case cvtValid = 0 case cvtValidButUntrusted = 1 case cvtInvalid = 2 case cvtCantBeEstablished = 3 }

@property (nonatomic,readwrite,assign,getter=interimValidationResult,setter=setInterimValidationResult:) int interimValidationResult;

- (int)interimValidationResult;
- (void)setInterimValidationResult :(int)newInterimValidationResult;

Default Value

0

Remarks

Over the course of the validation process, the validator maintains an interim validity status for the chain that is being processed. This status is influenced by every single step of the validation routine, and may change along the way, before the end of the chain is reached and the final validation conclusion is drawn.

Use this property to check the interim validity status mid-flight.

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

KnownCertificates Property (ASiCSigner Module)

Additional certificates for chain validation.

Syntax

public var knownCertificates: Array<Certificate> {

get {...} }

@property (nonatomic,readwrite,assign,getter=knownCertCount,setter=setKnownCertCount:) int knownCertCount;

- (int)knownCertCount;
- (void)setKnownCertCount :(int)newKnownCertCount;

- (NSData*)knownCertBytes:(int)knownCertIndex;

- (long long)knownCertHandle:(int)knownCertIndex;
- (void)setKnownCertHandle:(int)knownCertIndex :(long long)newKnownCertHandle;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

KnownCRLs Property (ASiCSigner Module)

Additional CRLs for chain validation.

Syntax

public var knownCRLs: Array<CRL> {

get {...} }

@property (nonatomic,readwrite,assign,getter=knownCRLCount,setter=setKnownCRLCount:) int knownCRLCount;

- (int)knownCRLCount;
- (void)setKnownCRLCount :(int)newKnownCRLCount;

- (NSData*)knownCRLBytes:(int)knownCRLIndex;

- (long long)knownCRLHandle:(int)knownCRLIndex;
- (void)setKnownCRLHandle:(int)knownCRLIndex :(long long)newKnownCRLHandle;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

KnownOCSPs Property (ASiCSigner Module)

Additional OCSP responses for chain validation.

Syntax

public var knownOCSPs: Array<OCSPResponse> {

get {...} }

@property (nonatomic,readwrite,assign,getter=knownOCSPCount,setter=setKnownOCSPCount:) int knownOCSPCount;

- (int)knownOCSPCount;
- (void)setKnownOCSPCount :(int)newKnownOCSPCount;

- (NSData*)knownOCSPBytes:(int)knownOCSPIndex;

- (long long)knownOCSPHandle:(int)knownOCSPIndex;
- (void)setKnownOCSPHandle:(int)knownOCSPIndex :(long long)newKnownOCSPHandle;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

Level Property (ASiCSigner Module)

Specifies the level according to which the inner AdES signature is to be composed.

Syntax

public var level: AsicsignerLevels {

get {...}
set {...} }

public enum AsicsignerLevels: Int32 { case aslUnknown = 0 case aslBES = 1 case aslEPES = 2 case aslT = 3 case aslC = 4 case aslXType1 = 5 case aslXType2 = 6 case aslXLType1 = 7 case aslXLType2 = 8 case aslBaselineB = 9 case aslBaselineT = 10 case aslBaselineLT = 11 case aslBaselineLTA = 12 case aslExtendedBES = 13 case aslExtendedEPES = 14 case aslExtendedT = 15 case aslExtendedC = 16 case aslExtendedXType1 = 17 case aslExtendedXType2 = 18 case aslExtendedXLType1 = 19 case aslExtendedXLType2 = 20 case aslExtendedA = 21 case aslA = 22 }

@property (nonatomic,readwrite,assign,getter=level,setter=setLevel:) int level;

- (int)level;
- (void)setLevel :(int)newLevel;

Default Value

1

Remarks

CAdES and XAdES standards define a number of signature levels. The main differences between levels are in the scope of validation information included to the signature. BES signatures only include the most necessary information (the signing chain), whereas XL and A signatures include the complete set.

aslUnknown0
aslBES1
aslEPES2
aslT3
aslC4
aslXType15
aslXType26
aslXLType17
aslXLType28
aslBaselineB9
aslBaselineT10
aslBaselineLT11
aslBaselineLTA12
aslExtendedBES13
aslExtendedEPES14
aslExtendedT15
aslExtendedC16
aslExtendedXType117
aslExtendedXType218
aslExtendedXLType119
aslExtendedXLType220
aslA21
aslExtendedA22

OfflineMode Property (ASiCSigner Module)

Switches the module to the offline mode.

Syntax

public var offlineMode: Bool {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=offlineMode,setter=setOfflineMode:) BOOL offlineMode;

- (BOOL)offlineMode;
- (void)setOfflineMode :(BOOL)newOfflineMode;

Default Value

False

Remarks

When working in offline mode, the component restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

OutputBytes Property (ASiCSigner Module)

Use this property to read the output the module object has produced.

Syntax

public var outputBytes: Data {

get {...} }

@property (nonatomic,readonly,assign,getter=outputBytes) NSData* outputBytes;

- (NSData*)outputBytes;

Remarks

Read the contents of this property after the operation is completed to read the produced output. This property will only be set if OutputFile and OutputStream properties had not been assigned.

This property is read-only.

OutputFile Property (ASiCSigner Module)

The file where the signed data will be saved.

Syntax

public var outputFile: String {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=outputFile,setter=setOutputFile:) NSString* outputFile;

- (NSString*)outputFile;
- (void)setOutputFile :(NSString*)newOutputFile;

Default Value

""

Remarks

Provides a path to the file where the class should store the container.

ASiC is essentially a ZIP archive, but it is recommended to use ".asics" or ".scs" extension for ASiC-S files, and ".asice" or ".sce" for ASiC-E files.

PolicyHash Property (ASiCSigner Module)

The signature policy hash value.

Syntax

public var policyHash: String {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=policyHash,setter=setPolicyHash:) NSString* policyHash;

- (NSString*)policyHash;
- (void)setPolicyHash :(NSString*)newPolicyHash;

Default Value

""

Remarks

Use this property to set the signature policy hash for EPES signatures

PolicyHashAlgorithm Property (ASiCSigner Module)

The algorithm that was used to calculate the signature policy hash.

Syntax

public var policyHashAlgorithm: String {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=policyHashAlgorithm,setter=setPolicyHashAlgorithm:) NSString* policyHashAlgorithm;

- (NSString*)policyHashAlgorithm;
- (void)setPolicyHashAlgorithm :(NSString*)newPolicyHashAlgorithm;

Default Value

"SHA256"

Remarks

Use this property to specify the hash algorithm that was used to calculate the signature policy hash. Assign the actual hash value to PolicyHash.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

PolicyID Property (ASiCSigner Module)

The policy ID to be included into the signature.

Syntax

public var policyID: String {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=policyID,setter=setPolicyID:) NSString* policyID;

- (NSString*)policyID;
- (void)setPolicyID :(NSString*)newPolicyID;

Default Value

""

Remarks

Use this property to specify the signature policy identifier for EPES signatures.

PolicyURI Property (ASiCSigner Module)

The signature policy URI to be included in the signature.

Syntax

public var policyURI: String {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=policyURI,setter=setPolicyURI:) NSString* policyURI;

- (NSString*)policyURI;
- (void)setPolicyURI :(NSString*)newPolicyURI;

Default Value

""

Remarks

Use this property to specify the URI of the signature policy for EPES signatures.

Profile Property (ASiCSigner Module)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

public var profile: String {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=profile,setter=setProfile:) NSString* profile;

- (NSString*)profile;
- (void)setProfile :(NSString*)newProfile;

Default Value

""

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Proxy Property (ASiCSigner Module)

The proxy server settings.

Syntax

public var proxy: ProxySettings {

get {...} }

@property (nonatomic,readwrite,assign,getter=proxyAddress,setter=setProxyAddress:) NSString* proxyAddress;

- (NSString*)proxyAddress;
- (void)setProxyAddress :(NSString*)newProxyAddress;

@property (nonatomic,readwrite,assign,getter=proxyAuthentication,setter=setProxyAuthentication:) int proxyAuthentication;

- (int)proxyAuthentication;
- (void)setProxyAuthentication :(int)newProxyAuthentication;

@property (nonatomic,readwrite,assign,getter=proxyPassword,setter=setProxyPassword:) NSString* proxyPassword;

- (NSString*)proxyPassword;
- (void)setProxyPassword :(NSString*)newProxyPassword;

@property (nonatomic,readwrite,assign,getter=proxyPort,setter=setProxyPort:) int proxyPort;

- (int)proxyPort;
- (void)setProxyPort :(int)newProxyPort;

@property (nonatomic,readwrite,assign,getter=proxyProxyType,setter=setProxyProxyType:) int proxyProxyType;

- (int)proxyProxyType;
- (void)setProxyProxyType :(int)newProxyProxyType;

@property (nonatomic,readwrite,assign,getter=proxyRequestHeaders,setter=setProxyRequestHeaders:) NSString* proxyRequestHeaders;

- (NSString*)proxyRequestHeaders;
- (void)setProxyRequestHeaders :(NSString*)newProxyRequestHeaders;

@property (nonatomic,readwrite,assign,getter=proxyResponseBody,setter=setProxyResponseBody:) NSString* proxyResponseBody;

- (NSString*)proxyResponseBody;
- (void)setProxyResponseBody :(NSString*)newProxyResponseBody;

@property (nonatomic,readwrite,assign,getter=proxyResponseHeaders,setter=setProxyResponseHeaders:) NSString* proxyResponseHeaders;

- (NSString*)proxyResponseHeaders;
- (void)setProxyResponseHeaders :(NSString*)newProxyResponseHeaders;

@property (nonatomic,readwrite,assign,getter=proxyUseIPv6,setter=setProxyUseIPv6:) BOOL proxyUseIPv6;

- (BOOL)proxyUseIPv6;
- (void)setProxyUseIPv6 :(BOOL)newProxyUseIPv6;

@property (nonatomic,readwrite,assign,getter=proxyUseProxy,setter=setProxyUseProxy:) BOOL proxyUseProxy;

- (BOOL)proxyUseProxy;
- (void)setProxyUseProxy :(BOOL)newProxyUseProxy;

@property (nonatomic,readwrite,assign,getter=proxyUsername,setter=setProxyUsername:) NSString* proxyUsername;

- (NSString*)proxyUsername;
- (void)setProxyUsername :(NSString*)newProxyUsername;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

RevocationCheck Property (ASiCSigner Module)

Specifies the kind(s) of revocation check to perform.

Syntax

public var revocationCheck: AsicsignerRevocationChecks {

get {...}
set {...} }

public enum AsicsignerRevocationChecks: Int32 { case crcNone = 0 case crcAuto = 1 case crcAllCRL = 2 case crcAllOCSP = 3 case crcAllCRLAndOCSP = 4 case crcAnyCRL = 5 case crcAnyOCSP = 6 case crcAnyCRLOrOCSP = 7 case crcAnyOCSPOrCRL = 8 }

@property (nonatomic,readwrite,assign,getter=revocationCheck,setter=setRevocationCheck:) int revocationCheck;

- (int)revocationCheck;
- (void)setRevocationCheck :(int)newRevocationCheck;

Default Value

1

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRL) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.

crcNone (0)No revocation checking
crcAuto (1)Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL (2)Check all provided CRL endpoints for all chain certificates.
crcAllOCSP (3)Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP (4)Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL (5)At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP (6)At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP (7)At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL (8)At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

SignatureIndex Property (ASiCSigner Module)

The index of the signature to update.

Syntax

public var signatureIndex: Int32 {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=signatureIndex,setter=setSignatureIndex:) int signatureIndex;

- (int)signatureIndex;
- (void)setSignatureIndex :(int)newSignatureIndex;

Default Value

0

Remarks

Use this property to specify the index of the existing signature before timestamping or adding validation info.

SignatureType Property (ASiCSigner Module)

Specifies the kind of signature to be created.

Syntax

public var signatureType: AsicsignerSignatureTypes {

get {...}
set {...} }

public enum AsicsignerSignatureTypes: Int32 { case castUnknown = 0 case castCAdES = 1 case castXAdES = 2 case castTimestamp = 3 }

@property (nonatomic,readwrite,assign,getter=signatureType,setter=setSignatureType:) int signatureType;

- (int)signatureType;
- (void)setSignatureType :(int)newSignatureType;

Default Value

1

Remarks

Use this property to specify the desired signature type: CAdE, XAdES, or Timestamp.

Note that a simple (ASiC-S) container can only contain one CAdES signature, and/or one XAdES signature, and/or one Timestamp. An ASiC-E container can include multiple CAdES, XAdES, or Timestamp elements. Use Extended to specify the type of container to create.

castUnknown0
castCAdES1
castXAdES2
castTimestamp3

SigningCertificate Property (ASiCSigner Module)

The certificate to be used for signing.

Syntax

public var signingCertificate: Certificate {

get {...}
set {...} }

@property (nonatomic,readonly,assign,getter=signingCertBytes) NSData* signingCertBytes;

- (NSData*)signingCertBytes;

@property (nonatomic,readwrite,assign,getter=signingCertHandle,setter=setSigningCertHandle:) long long signingCertHandle;

- (long long)signingCertHandle;
- (void)setSigningCertHandle :(long long)newSigningCertHandle;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

SigningChain Property (ASiCSigner Module)

The signing certificate chain.

Syntax

public var signingChain: Array<Certificate> {

get {...} }

@property (nonatomic,readwrite,assign,getter=signingChainCount,setter=setSigningChainCount:) int signingChainCount;

- (int)signingChainCount;
- (void)setSigningChainCount :(int)newSigningChainCount;

- (NSData*)signingChainBytes:(int)signingChainIndex;

- (long long)signingChainHandle:(int)signingChainIndex;
- (void)setSigningChainHandle:(int)signingChainIndex :(long long)newSigningChainHandle;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

SocketSettings Property (ASiCSigner Module)

Manages network connection settings.

Syntax

public var socketSettings: SocketSettings {

get {...} }

@property (nonatomic,readwrite,assign,getter=socketDNSMode,setter=setSocketDNSMode:) int socketDNSMode;

- (int)socketDNSMode;
- (void)setSocketDNSMode :(int)newSocketDNSMode;

@property (nonatomic,readwrite,assign,getter=socketDNSPort,setter=setSocketDNSPort:) int socketDNSPort;

- (int)socketDNSPort;
- (void)setSocketDNSPort :(int)newSocketDNSPort;

@property (nonatomic,readwrite,assign,getter=socketDNSQueryTimeout,setter=setSocketDNSQueryTimeout:) int socketDNSQueryTimeout;

- (int)socketDNSQueryTimeout;
- (void)setSocketDNSQueryTimeout :(int)newSocketDNSQueryTimeout;

@property (nonatomic,readwrite,assign,getter=socketDNSServers,setter=setSocketDNSServers:) NSString* socketDNSServers;

- (NSString*)socketDNSServers;
- (void)setSocketDNSServers :(NSString*)newSocketDNSServers;

@property (nonatomic,readwrite,assign,getter=socketDNSTotalTimeout,setter=setSocketDNSTotalTimeout:) int socketDNSTotalTimeout;

- (int)socketDNSTotalTimeout;
- (void)setSocketDNSTotalTimeout :(int)newSocketDNSTotalTimeout;

@property (nonatomic,readwrite,assign,getter=socketIncomingSpeedLimit,setter=setSocketIncomingSpeedLimit:) int socketIncomingSpeedLimit;

- (int)socketIncomingSpeedLimit;
- (void)setSocketIncomingSpeedLimit :(int)newSocketIncomingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketLocalAddress,setter=setSocketLocalAddress:) NSString* socketLocalAddress;

- (NSString*)socketLocalAddress;
- (void)setSocketLocalAddress :(NSString*)newSocketLocalAddress;

@property (nonatomic,readwrite,assign,getter=socketLocalPort,setter=setSocketLocalPort:) int socketLocalPort;

- (int)socketLocalPort;
- (void)setSocketLocalPort :(int)newSocketLocalPort;

@property (nonatomic,readwrite,assign,getter=socketOutgoingSpeedLimit,setter=setSocketOutgoingSpeedLimit:) int socketOutgoingSpeedLimit;

- (int)socketOutgoingSpeedLimit;
- (void)setSocketOutgoingSpeedLimit :(int)newSocketOutgoingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketTimeout,setter=setSocketTimeout:) int socketTimeout;

- (int)socketTimeout;
- (void)setSocketTimeout :(int)newSocketTimeout;

@property (nonatomic,readwrite,assign,getter=socketUseIPv6,setter=setSocketUseIPv6:) BOOL socketUseIPv6;

- (BOOL)socketUseIPv6;
- (void)setSocketUseIPv6 :(BOOL)newSocketUseIPv6;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

SourceBytes Property (ASiCSigner Module)

Use this property to pass the content to sign in the byte array form.

Syntax

public var sourceBytes: Data {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=sourceBytes,setter=setSourceBytes:) NSData* sourceBytes;

- (NSData*)sourceBytes;
- (void)setSourceBytes :(NSData*)newSourceBytes;

Remarks

Assign a byte array containing the source file to be signed to this property.

SourceFiles Property (ASiCSigner Module)

The files to be packed into the container.

Syntax

public var sourceFiles: String {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=sourceFiles,setter=setSourceFiles:) NSString* sourceFiles;

- (NSString*)sourceFiles;
- (void)setSourceFiles :(NSString*)newSourceFiles;

Default Value

""

Remarks

Assign a comma- or semicolon-separated list of paths to the files to be included in the container. Remember to set Extended to true if signing more than one file.

SourceName Property (ASiCSigner Module)

Use this property to specify the name of the file being signed if passing it via the SourceBytes property.

Syntax

public var sourceName: String {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=sourceName,setter=setSourceName:) NSString* sourceName;

- (NSString*)sourceName;
- (void)setSourceName :(NSString*)newSourceName;

Default Value

""

Remarks

Provide the name of the file to be included in the ASiC container if passing the file in the byte array form.

TimestampServer Property (ASiCSigner Module)

The address of the timestamping server.

Syntax

public var timestampServer: String {

get {...}
set {...} }

@property (nonatomic,readwrite,assign,getter=timestampServer,setter=setTimestampServer:) NSString* timestampServer;

- (NSString*)timestampServer;
- (void)setTimestampServer :(NSString*)newTimestampServer;

Default Value

""

Remarks

Use this property to provide the address of the Time Stamping Authority (TSA) server to be used for timestamping the signature.

SecureBlackbox supports RFC3161-compliant timestamping servers, available via HTTP or HTTPS.

If your timestamping service enforces credential-based user authentication (basic or digest), you can provide the credentials in the same URL:

http://user:password@timestamp.server.com/TsaService

For TSAs using certificate-based TLS authentication, provide the client certificate via the TLSClientChain property.

If this property is left empty, no timestamp will be added to the signature.

Starting from summer 2021 update (Vol. 2), the virtual timestamping service is supported, which allows you to intervene in the timestamping routine and provide your own handling for the TSA exchange. This may be handy if the service that you are requesting timestamps from uses a non-standard TSP protocol or requires special authentication option.

To employ the virtual service, assign an URI of the following format to this property:

virtual://localhost?hashonly=true&amp;includecerts=true&amp;reqpolicy=1.2.3.4.5&amp;halg=SHA256

Subscribe to Notification event to get notified about the virtualized timestamping event. The EventID of the timestamping event is TimestampRequest. Inside the event handler, read the base16-encoded request from the EventParam parameter and forward it to the timestamping authority. Upon receiving the response, pass it back to the component, encoded in base16, via the TimestampResponse config property:

component.Config("TimestampResponse=308208ab...");

Note that all the exchange with your custom TSA should take place within the same invocation of the Notification event.

The hashonly parameter of the virtual URI tells the component to only return the timestamp message imprint via the EventParam parameter. If set to false, EventParam will contain the complete RFC3161 timestamping request.

The includecerts parameter specifies that the requestCertificates parameter of the timestamping request should be set to true.

The reqpolicy parameter lets you specify the request policy, and the halg parameter specifies the hash algorithm to use for timestamping.

All the parameters are optional.

TLSClientChain Property (ASiCSigner Module)

The TLS client certificate chain.

Syntax

public var tlsClientChain: Array<Certificate> {

get {...} }

@property (nonatomic,readwrite,assign,getter=TLSClientCertCount,setter=setTLSClientCertCount:) int TLSClientCertCount;

- (int)TLSClientCertCount;
- (void)setTLSClientCertCount :(int)newTLSClientCertCount;

- (NSData*)TLSClientCertBytes:(int)tLSClientCertIndex;

- (long long)TLSClientCertHandle:(int)tLSClientCertIndex;
- (void)setTLSClientCertHandle:(int)tLSClientCertIndex :(long long)newTLSClientCertHandle;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

TLSServerChain Property (ASiCSigner Module)

The TLS server's certificate chain.

Syntax

public var tlsServerChain: Array<Certificate> {

get {...} }

@property (nonatomic,readonly,assign,getter=TLSServerCertCount) int TLSServerCertCount;

- (int)TLSServerCertCount;

- (NSData*)TLSServerCertBytes:(int)tLSServerCertIndex;

- (long long)TLSServerCertHandle:(int)tLSServerCertIndex;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

TLSSettings Property (ASiCSigner Module)

Manages TLS layer settings.

Syntax

public var tlsSettings: TLSSettings {

get {...} }

@property (nonatomic,readwrite,assign,getter=TLSAutoValidateCertificates,setter=setTLSAutoValidateCertificates:) BOOL TLSAutoValidateCertificates;

- (BOOL)TLSAutoValidateCertificates;
- (void)setTLSAutoValidateCertificates :(BOOL)newTLSAutoValidateCertificates;

@property (nonatomic,readwrite,assign,getter=TLSBaseConfiguration,setter=setTLSBaseConfiguration:) int TLSBaseConfiguration;

- (int)TLSBaseConfiguration;
- (void)setTLSBaseConfiguration :(int)newTLSBaseConfiguration;

@property (nonatomic,readwrite,assign,getter=TLSCiphersuites,setter=setTLSCiphersuites:) NSString* TLSCiphersuites;

- (NSString*)TLSCiphersuites;
- (void)setTLSCiphersuites :(NSString*)newTLSCiphersuites;

@property (nonatomic,readwrite,assign,getter=TLSECCurves,setter=setTLSECCurves:) NSString* TLSECCurves;

- (NSString*)TLSECCurves;
- (void)setTLSECCurves :(NSString*)newTLSECCurves;

@property (nonatomic,readwrite,assign,getter=TLSExtensions,setter=setTLSExtensions:) NSString* TLSExtensions;

- (NSString*)TLSExtensions;
- (void)setTLSExtensions :(NSString*)newTLSExtensions;

@property (nonatomic,readwrite,assign,getter=TLSForceResumeIfDestinationChanges,setter=setTLSForceResumeIfDestinationChanges:) BOOL TLSForceResumeIfDestinationChanges;

- (BOOL)TLSForceResumeIfDestinationChanges;
- (void)setTLSForceResumeIfDestinationChanges :(BOOL)newTLSForceResumeIfDestinationChanges;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedIdentity,setter=setTLSPreSharedIdentity:) NSString* TLSPreSharedIdentity;

- (NSString*)TLSPreSharedIdentity;
- (void)setTLSPreSharedIdentity :(NSString*)newTLSPreSharedIdentity;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKey,setter=setTLSPreSharedKey:) NSString* TLSPreSharedKey;

- (NSString*)TLSPreSharedKey;
- (void)setTLSPreSharedKey :(NSString*)newTLSPreSharedKey;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKeyCiphersuite,setter=setTLSPreSharedKeyCiphersuite:) NSString* TLSPreSharedKeyCiphersuite;

- (NSString*)TLSPreSharedKeyCiphersuite;
- (void)setTLSPreSharedKeyCiphersuite :(NSString*)newTLSPreSharedKeyCiphersuite;

@property (nonatomic,readwrite,assign,getter=TLSRenegotiationAttackPreventionMode,setter=setTLSRenegotiationAttackPreventionMode:) int TLSRenegotiationAttackPreventionMode;

- (int)TLSRenegotiationAttackPreventionMode;
- (void)setTLSRenegotiationAttackPreventionMode :(int)newTLSRenegotiationAttackPreventionMode;

@property (nonatomic,readwrite,assign,getter=TLSRevocationCheck,setter=setTLSRevocationCheck:) int TLSRevocationCheck;

- (int)TLSRevocationCheck;
- (void)setTLSRevocationCheck :(int)newTLSRevocationCheck;

@property (nonatomic,readwrite,assign,getter=TLSSSLOptions,setter=setTLSSSLOptions:) int TLSSSLOptions;

- (int)TLSSSLOptions;
- (void)setTLSSSLOptions :(int)newTLSSSLOptions;

@property (nonatomic,readwrite,assign,getter=TLSTLSMode,setter=setTLSTLSMode:) int TLSTLSMode;

- (int)TLSTLSMode;
- (void)setTLSTLSMode :(int)newTLSTLSMode;

@property (nonatomic,readwrite,assign,getter=TLSUseExtendedMasterSecret,setter=setTLSUseExtendedMasterSecret:) BOOL TLSUseExtendedMasterSecret;

- (BOOL)TLSUseExtendedMasterSecret;
- (void)setTLSUseExtendedMasterSecret :(BOOL)newTLSUseExtendedMasterSecret;

@property (nonatomic,readwrite,assign,getter=TLSUseSessionResumption,setter=setTLSUseSessionResumption:) BOOL TLSUseSessionResumption;

- (BOOL)TLSUseSessionResumption;
- (void)setTLSUseSessionResumption :(BOOL)newTLSUseSessionResumption;

@property (nonatomic,readwrite,assign,getter=TLSVersions,setter=setTLSVersions:) int TLSVersions;

- (int)TLSVersions;
- (void)setTLSVersions :(int)newTLSVersions;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

TrustedCertificates Property (ASiCSigner Module)

A list of trusted certificates for chain validation.

Syntax

public var trustedCertificates: Array<Certificate> {

get {...} }

@property (nonatomic,readwrite,assign,getter=trustedCertCount,setter=setTrustedCertCount:) int trustedCertCount;

- (int)trustedCertCount;
- (void)setTrustedCertCount :(int)newTrustedCertCount;

- (NSData*)trustedCertBytes:(int)trustedCertIndex;

- (long long)trustedCertHandle:(int)trustedCertIndex;
- (void)setTrustedCertHandle:(int)trustedCertIndex :(long long)newTrustedCertHandle;

 

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

ValidationLog Property (ASiCSigner Module)

Contains the complete log of the certificate validation routine.

Syntax

public var validationLog: String {

get {...} }

@property (nonatomic,readonly,assign,getter=validationLog) NSString* validationLog;

- (NSString*)validationLog;

Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only.

Config Method (ASiCSigner Module)

Sets or retrieves a configuration setting.

Syntax

public func config(configurationString: String) throws -> String
- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (ASiCSigner Module)

Performs an additional action.

Syntax

public func doAction(actionID: String, actionParams: String) throws -> String
- (NSString*)doAction:(NSString*)actionID :(NSString*)actionParams;

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier of the action is provided in ActionID parameter. ActionParams contains a list of parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

ExtractAsyncData Method (ASiCSigner Module)

Extracts user data from the DC signing service response.

Syntax

public func extractAsyncData(asyncReply: String) throws -> String
- (NSString*)extractAsyncData:(NSString*)asyncReply;

Remarks

Call this method before finalizing the asynchronous signing process to extract the data passed to the ExternalCrypto.Data property on the pre-signing stage.

The Data parameter can be used to pass some state or document identifier along with the signing request from the pre-signing to completion async stage.

Sign Method (ASiCSigner Module)

Signs the chosen files and packs them into an ASiC archive.

Syntax

public func sign() throws -> Void
- (void)sign;

Remarks

Use this method to create a new ASiC signature container in accordance with the component setup.

SignAsyncBegin Method (ASiCSigner Module)

Initiates the asynchronous signing operation.

Syntax

public func signAsyncBegin() throws -> String
- (NSString*)signAsyncBegin;

Remarks

When using the DC framework, call this method to initiate the asynchronous signing process. Upon completion, a pre-signed copy of the document will be saved in OutputFile (or OutputStream). Keep the pre-signed copy somewhere local, and pass the returned string ('the request state') to the DC processor for handling.

Upon receiving the response state from the DC processor, assign the path to the pre-signed copy to InputFile (or InputStream), and call SignAsyncEnd to finalize the signing.

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

AsyncState is a message of the distributed cryptography (DC) protocol. DC protocol is based on exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth control), which processes it and produces a matching signatures state. The async state produced by the server is then passed to the SignAsyncEnd method.

SignAsyncEnd Method (ASiCSigner Module)

Completes the asynchronous signing operation.

Syntax

public func signAsyncEnd(asyncReply: String) throws -> Void
- (void)signAsyncEnd:(NSString*)asyncReply;

Remarks

When using the DC framework, call this method upon receiving the response state from the DC processor to complete the asynchronous signing process.

Before calling this method, assign the path to the pre-signed copy of the document obtained from prior SignAsyncBegin call to InputFile (or InputStream). The method will embed the signature into the pre-signed document, and save the complete signed document to OutputFile (or OutputStream).

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

AsyncState is a message of the distributed cryptography (DC) protocol. DC protocol is based on exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth control), which processes it and produces a matching signatures state. The async state produced by the server is then passed to the SignAsyncEnd method.

SignExternal Method (ASiCSigner Module)

Signs the document using an external signing facility.

Syntax

public func signExternal() throws -> Void
- (void)signExternal;

Remarks

Use this method to create an ASiC signature using an external signing facility for the cryptographic computations. SignExternal delegates the low-level signing operation to an external, remote, or custom signing engine. This method is useful if the signature has to be made by a device accessible through a custom or non-standard signing interface.

When all preparations are done and hash is computed, the class fires ExternalSign event which allows to pass the hash value for signing.

Timestamp Method (ASiCSigner Module)

Use this method to add timestamp.

Syntax

public func timestamp(timestampType: Int32) throws -> Void
- (void)timestamp:(int)timestampType;

Remarks

Call this method to timestamp the signature. Use the TimestampServer property to provide the address of the TSA (Time Stamping Authority) server which should be used for timestamping. Use the TimestampType parameter to specify the type of timestamp to create Available options:

tstUnknown0
tstLegacy1Supported by: AuthenticodeVerifier

tstTrusted2Supported by: AuthenticodeVerifier

tstGeneric3Supported by: CAdESVerifier

tstESC4Supported by: CAdESVerifier

tstContent5Supported by: CAdESVerifier

tstCertsAndCRLs6Supported by: CAdESVerifier

tstArchive7Archive timestamp. Supported by: CAdESVerifier, OfficeVerifier, SOAPVerifier, XAdESVerifier

tstArchive28Archive v2 timestamp. Supported by: CAdESVerifier

tstArchive39Archive v3 timestamp. Supported by: CAdESVerifier

tstIndividualDataObjects10Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier

tstAllDataObjects11Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier

tstSignature12Signature timestamp. Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier

tstRefsOnly13RefsOnly timestamp. Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier

tstSigAndRefs14SigAndRefs timestamp. Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier

Upgrade Method (ASiCSigner Module)

Upgrades existing CAdES or XAdES signature to a new level.

Syntax

public func upgrade(toLevel: Int32) throws -> Void
- (void)upgrade:(int)toLevel;

Remarks

CAdES and XAdES standard defines a number of different 'levels' or 'forms' of signatures which can be used for different purposes. Use this method to upgrade CAdES or XAdES signature to a new level specified by ToLevel. Signatures can normally be upgraded from less sophisticated levels (BES, EPES) to more sophisticated (T, XL, A).

Supported levels:

aslUnknown0
aslBES1
aslEPES2
aslT3
aslC4
aslXType15
aslXType26
aslXLType17
aslXLType28
aslBaselineB9
aslBaselineT10
aslBaselineLT11
aslBaselineLTA12
aslExtendedBES13
aslExtendedEPES14
aslExtendedT15
aslExtendedC16
aslExtendedXType117
aslExtendedXType218
aslExtendedXLType119
aslExtendedXLType220
aslA21
aslExtendedA22

ChainElementDownload Event (ASiCSigner Module)

TBD.

Syntax

func onChainElementDownload(cert: String, caCert: String, location: String)
- (void)onChainElementDownload:(NSString*)cert :(NSString*)CACert :(NSString*)location;

Remarks

TBD.

ChainElementNeeded Event (ASiCSigner Module)

TBD.

Syntax

func onChainElementNeeded(cert: String, caCert: String)
- (void)onChainElementNeeded:(NSString*)cert :(NSString*)CACert;

Remarks

TBD.

Error Event (ASiCSigner Module)

Information about any errors that occur during signing or archiving.

Syntax

func onError(errorCode: Int32, description: String)
- (void)onError:(int)errorCode :(NSString*)description;

Remarks

The event is fired in case of exceptional conditions which occur during signing or archiving of data.

ErrorCode contains an error code and Description contains a textual description of the error.

ExternalSign Event (ASiCSigner Module)

Handles remote or external signing initiated by the SignExternal method or other source.

Syntax

func onExternalSign(operationId: String, hashAlgorithm: String, pars: String, data: String, signedData: inout String)
- (void)onExternalSign:(NSString*)operationId :(NSString*)hashAlgorithm :(NSString*)pars :(NSString*)data :(NSString**)signedData;

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the component via SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contain algorithm-dependent parameters.

The component uses base16 (hex) encoding for Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses a .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

Notification Event (ASiCSigner Module)

This event notifies the application about an underlying control flow event.

Syntax

func onNotification(eventID: String, eventParam: String)
- (void)onNotification:(NSString*)eventID :(NSString*)eventParam;

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:

TimestampRequestA timestamp is requested from the custom timestamping authority. This event is only fired if TimestampServer was set to a virtual:// URI. The EventParam parameter contains the TSP request (or the plain hash, depending on the value provided to TimestampServer), in base16, that needs to be sent to the TSA.

Use the event handler to send the request to the TSA. Upon receiving the response, assign it, in base16, to the TimestampResponse configuration property.

AddReferenceA reference is being added to the archive. The EventParam parameter contains the path. Use the event handler to tune-up the reference parameters. One such parameter, represented by the RefMimeType config property, is the MIME type of the referenced file object.

StoreCertificate Event (ASiCSigner Module)

This event is fired when a certificate should be stored along with a signature.

Syntax

func onStoreCertificate(cert: Data, uri: inout String)
- (void)onStoreCertificate:(NSData*)cert :(NSString**)URI;

Remarks

This event could occur if you are verifying XAdES-C form or higher. Cert parameter contains a certificate in binary form that should be stored along with a signature, and the user should provide the URI of the stored certificate.

StoreCRL Event (ASiCSigner Module)

This event is fired when a CRL should be stored along with a signature.

Syntax

func onStoreCRL(crl: Data, uri: inout String)
- (void)onStoreCRL:(NSData*)CRL :(NSString**)URI;

Remarks

This event could occur if you are verifying XAdES-C form or higher. CRL parameter contains a CRL in binary form that should be stored along with a signature, and the user should provide the URI of the stored CRL.

StoreOCSPResponse Event (ASiCSigner Module)

This event is fired when a OCSP Response should be stored along with a signature.

Syntax

func onStoreOCSPResponse(ocspResponse: Data, uri: inout String)
- (void)onStoreOCSPResponse:(NSData*)OCSPResponse :(NSString**)URI;

Remarks

This event could occur if you are verifying XAdES-C form or higher. OCSPResponse parameter contains an OCSP Response in binary form that should be stored along with a signature, and the user should provide the URI of the stored OCSP Response.

TLSCertValidate Event (ASiCSigner Module)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

func onTLSCertValidate(serverHostname: String, serverIP: String, accept: inout Bool)
- (void)onTLSCertValidate:(NSString*)serverHostname :(NSString*)serverIP :(int*)accept;

Remarks

This event is fired during a TLS handshake. Use TLSServerChain property to access the certificate chain. In general case, components may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the component, and can be adjusted if needed.

ValidationProgress Event (ASiCSigner Module)

TBD.

Syntax

func onValidationProgress(validationEventType: String, cert: String, caCert: String, doContinue: inout Bool)
- (void)onValidationProgress:(NSString*)validationEventType :(NSString*)cert :(NSString*)CACert :(int*)doContinue;

Remarks

TBD.

Certificate Type

Provides details of an individual X.509 certificate.

Remarks

This type provides access to X.509 certificate details.

Fields

bytes
Data

Returns raw certificate data in DER format.

ca
Bool

Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).

caKeyID
Data

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

crlDistributionPoints
String

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

curve
String

Specifies the elliptic curve of the EC public key.

SB_EC_SECP112R1SECP112R1
SB_EC_SECP112R2SECP112R2
SB_EC_SECP128R1SECP128R1
SB_EC_SECP128R2SECP128R2
SB_EC_SECP160K1SECP160K1
SB_EC_SECP160R1SECP160R1
SB_EC_SECP160R2SECP160R2
SB_EC_SECP192K1SECP192K1
SB_EC_SECP192R1SECP192R1
SB_EC_SECP224K1SECP224K1
SB_EC_SECP224R1SECP224R1
SB_EC_SECP256K1SECP256K1
SB_EC_SECP256R1SECP256R1
SB_EC_SECP384R1SECP384R1
SB_EC_SECP521R1SECP521R1
SB_EC_SECT113R1SECT113R1
SB_EC_SECT113R2SECT113R2
SB_EC_SECT131R1SECT131R1
SB_EC_SECT131R2SECT131R2
SB_EC_SECT163K1SECT163K1
SB_EC_SECT163R1SECT163R1
SB_EC_SECT163R2SECT163R2
SB_EC_SECT193R1SECT193R1
SB_EC_SECT193R2SECT193R2
SB_EC_SECT233K1SECT233K1
SB_EC_SECT233R1SECT233R1
SB_EC_SECT239K1SECT239K1
SB_EC_SECT283K1SECT283K1
SB_EC_SECT283R1SECT283R1
SB_EC_SECT409K1SECT409K1
SB_EC_SECT409R1SECT409R1
SB_EC_SECT571K1SECT571K1
SB_EC_SECT571R1SECT571R1
SB_EC_PRIME192V1PRIME192V1
SB_EC_PRIME192V2PRIME192V2
SB_EC_PRIME192V3PRIME192V3
SB_EC_PRIME239V1PRIME239V1
SB_EC_PRIME239V2PRIME239V2
SB_EC_PRIME239V3PRIME239V3
SB_EC_PRIME256V1PRIME256V1
SB_EC_C2PNB163V1C2PNB163V1
SB_EC_C2PNB163V2C2PNB163V2
SB_EC_C2PNB163V3C2PNB163V3
SB_EC_C2PNB176W1C2PNB176W1
SB_EC_C2TNB191V1C2TNB191V1
SB_EC_C2TNB191V2C2TNB191V2
SB_EC_C2TNB191V3C2TNB191V3
SB_EC_C2ONB191V4C2ONB191V4
SB_EC_C2ONB191V5C2ONB191V5
SB_EC_C2PNB208W1C2PNB208W1
SB_EC_C2TNB239V1C2TNB239V1
SB_EC_C2TNB239V2C2TNB239V2
SB_EC_C2TNB239V3C2TNB239V3
SB_EC_C2ONB239V4C2ONB239V4
SB_EC_C2ONB239V5C2ONB239V5
SB_EC_C2PNB272W1C2PNB272W1
SB_EC_C2PNB304W1C2PNB304W1
SB_EC_C2TNB359V1C2TNB359V1
SB_EC_C2PNB368W1C2PNB368W1
SB_EC_C2TNB431R1C2TNB431R1
SB_EC_NISTP192NISTP192
SB_EC_NISTP224NISTP224
SB_EC_NISTP256NISTP256
SB_EC_NISTP384NISTP384
SB_EC_NISTP521NISTP521
SB_EC_NISTB163NISTB163
SB_EC_NISTB233NISTB233
SB_EC_NISTB283NISTB283
SB_EC_NISTB409NISTB409
SB_EC_NISTB571NISTB571
SB_EC_NISTK163NISTK163
SB_EC_NISTK233NISTK233
SB_EC_NISTK283NISTK283
SB_EC_NISTK409NISTK409
SB_EC_NISTK571NISTK571
SB_EC_GOSTCPTESTGOSTCPTEST
SB_EC_GOSTCPAGOSTCPA
SB_EC_GOSTCPBGOSTCPB
SB_EC_GOSTCPCGOSTCPC
SB_EC_GOSTCPXCHAGOSTCPXCHA
SB_EC_GOSTCPXCHBGOSTCPXCHB
SB_EC_BRAINPOOLP160R1BRAINPOOLP160R1
SB_EC_BRAINPOOLP160T1BRAINPOOLP160T1
SB_EC_BRAINPOOLP192R1BRAINPOOLP192R1
SB_EC_BRAINPOOLP192T1BRAINPOOLP192T1
SB_EC_BRAINPOOLP224R1BRAINPOOLP224R1
SB_EC_BRAINPOOLP224T1BRAINPOOLP224T1
SB_EC_BRAINPOOLP256R1BRAINPOOLP256R1
SB_EC_BRAINPOOLP256T1BRAINPOOLP256T1
SB_EC_BRAINPOOLP320R1BRAINPOOLP320R1
SB_EC_BRAINPOOLP320T1BRAINPOOLP320T1
SB_EC_BRAINPOOLP384R1BRAINPOOLP384R1
SB_EC_BRAINPOOLP384T1BRAINPOOLP384T1
SB_EC_BRAINPOOLP512R1BRAINPOOLP512R1
SB_EC_BRAINPOOLP512T1BRAINPOOLP512T1
SB_EC_CURVE25519CURVE25519
SB_EC_CURVE448CURVE448

fingerprint
Data

Contains the fingerprint (a hash imprint) of this certificate.

friendlyName
String

Contains an associated alias (friendly name) of the certificate.

handle
Int64

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

hashAlgorithm
String

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

issuer
String

The common name of the certificate issuer (CA), typically a company name.

issuerRDN
String

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

keyAlgorithm
String

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

keyBits
Int32

Returns the length of the public key.

keyFingerprint
Data

Returns a fingerprint of the public key contained in the certificate.

keyUsage
Int32

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

keyValid
Bool

Returns True if the certificate's key is cryptographically valid, and False otherwise.

ocspLocations
String

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

ocspNoCheck
Bool

TBD.

origin
Int32

Returns the origin of this certificate.

policyIDs
String

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

privateKeyBytes
Data

Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.

privateKeyExists
Bool

Indicates whether the certificate has an associated private key.

privateKeyExtractable
Bool

Indicates whether the private key is extractable

publicKeyBytes
Data

Contains the certificate's public key in DER format.

qualifiedStatements
QualifiedStatementsTypes

TBD

selfSigned
Bool

Indicates whether the certificate is self-signed (root) or signed by an external CA.

serialNumber
Data

Returns the certificate's serial number.

sigAlgorithm
String

Indicates the algorithm that was used by the CA to sign this certificate.

subject
String

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

subjectAlternativeName
String

TBD.

subjectKeyID
Data

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

subjectRDN
String

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

validFrom
String

The time point at which the certificate becomes valid, in UTC.

validTo
String

The time point at which the certificate expires, in UTC.

Constructors

public init(stream: InputStream?)

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.

public init()

Creates a new object with default field values.

CRL Type

Represents a Certificate Revocation List.

Remarks

CRLs store information about revoked certificates, i.e., certificates that have been identified as invalid by their issuing certificate authority (CA) for any number of reasons.

Each CRL object lists certificates from a single CA and identifies them by their serial numbers. A CA may or may not publish a CRL, may publish several CRLs, or may publish the same CRL in multiple locations.

Unlike OCSP responses, CRLs only list certificates that have been revoked. They do not list certificates that are still valid.

Fields

bytes
Data

Returns raw CRL data in DER format.

caKeyID
Data

A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.

entryCount
Int32

Returns the number of certificate status entries in the CRL.

handle
Int64

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

issuer
String

The common name of the CRL issuer (CA), typically a company name.

issuerRDN
String

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

location
String

The URL that the CRL was downloaded from.

nextUpdate
String

The planned time and date of the next version of this CRL to be published.

sigAlgorithm
String

The public key algorithm that was used by the CA to sign this CRL.

tbs
Data

The to-be-signed part of the CRL (the CRL without the signature part).

thisUpdate
String

The date and time at which this version of the CRL was published.

Constructors

public init()

Creates an empty CRL object.

ExternalCrypto Type

Specifies the parameters of external cryptographic calls.

Remarks

External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.

Fields

asyncDocumentID
String

Specifies the document ID for SignAsyncEnd() call

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. This value helps ASiCSigner identify the correct signature in the returned batch of responses. If using batched requests, make sure to set this property to the same value on both pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

customParams
String

Custom parameters to be passed to the signing service (uninterpreted).

data
String

Additional data to be included in the async state and mirrored back by the requestor

externalHashCalculation
Bool

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by all components. In particular, components operating with larger objects (PDFSigner, CAdESSigner, XAdESSigner) do not support it.

hashAlgorithm
String

Specifies the request's signature hash algorithm.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

keyID
String

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides extra protection layer for the protocol and diminishes the risk of private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

keySecret
String

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the topic.

method
AsyncSignMethods

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

asmdPKCS10
asmdPKCS71

mode
ExternalCryptoModes

Specifies the external cryptography mode.

Available options:

ecmDefaultThe default value (0)
ecmDisabledDo not use DC or external signing (1)
ecmGenericGeneric external signing with OnExternalSign event (2)
ecmDCAuthDCAuth signing (3)
ecmDCAuthJSONDCAuth signing in JSON format (4)

publicKeyAlgorithm
String

Provide public key algorithm here if the certificate is not available on the pre-signing stage.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

Constructors

public init()

Creates a new ExternalCrypto object with default field values.

OCSPResponse Type

Represents a single OCSP response originating from an OCSP responder.

Remarks

OCSP is a protocol that allows verification of certificate status in real-time, and is an alternative to Certificate Revocation Lists (CRL).

An OCSP response is a snapshot of the certificate status at a given time.

Fields

bytes
Data

Buffer containing raw OCSP response data.

entryCount
Int32

The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.

handle
Int64

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

issuer
String

Indicates the issuer of this response (a CA or its authorized representative).

issuerRDN
String

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

location
String

Location of the OCSP responder.

producedAt
String

Specifies the time when the response was produced, in UTC.

Constructors

public init()

Creates an empty OCSP response object.

ProxySettings Type

A container for proxy server settings.

Remarks

This type exposes a collection of properties for tuning up the proxy server configuration.

Fields

address
String

The IP address of the proxy server.

authentication
ProxyAuthTypes

The authentication type used by the proxy server.

patNoAuthentication0
patBasic1
patDigest2
patNTLM3

password
String

The password to authenticate to the proxy server.

port
Int32

The port on the proxy server to connect to.

proxyType
ProxyTypes

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.

cptNone0
cptSocks41
cptSocks52
cptWebTunnel3
cptHTTP4

requestHeaders
String

Contains HTTP request headers for WebTunnel and HTTP proxy.

responseBody
String

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

responseHeaders
String

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

useIPv6
Bool

Specifies whether IPv6 should be used when connecting through the proxy.

useProxy
Bool

Enables or disables proxy-driven connection.

username
String

Specifies the username credential for proxy authentication.

Constructors

public init()

Creates a new ProxySettings object.

SocketSettings Type

A container for the socket settings.

Remarks

This type is a container for socket-layer parameters.

Fields

dnsMode
DNSResolveModes

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

dmAuto0
dmPlatform1
dmOwn2
dmOwnSecure3

dnsPort
Int32

Specifies the port number to be used for sending queries to the DNS server.

dnsQueryTimeout
Int32

The timeout (in milliseconds) for each DNS query. The value of 0 indicates the infinite timeout.

dnsServers
String

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

dnsTotalTimeout
Int32

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates the infinite timeout.

incomingSpeedLimit
Int32

The maximum number of bytes to read from the socket, per second.

localAddress
String

The local network interface to bind the socket to.

localPort
Int32

The local port number to bind the socket to.

outgoingSpeedLimit
Int32

The maximum number of bytes to write to the socket, per second.

timeout
Int32

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

useIPv6
Bool

Enables or disables IP protocol version 6.

Constructors

public init()

Creates a new SocketSettings object.

TLSSettings Type

A container for TLS connection settings.

Remarks

TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.

Fields

autoValidateCertificates
Bool

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

baseConfiguration
SecureTransportPredefinedConfigurations

Selects the base configuration for the TLS settings. Several profiles are on offer, tuned up for different purposes, such as high security or higher compatibility.

stpcDefault0
stpcCompatible1
stpcComprehensiveInsecure2
stpcHighlySecure3

ciphersuites
String

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases that allow to blanketly enable or disable all ciphersuites at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

  • NULL_NULL_NULL
  • RSA_NULL_MD5
  • RSA_NULL_SHA
  • RSA_RC4_MD5
  • RSA_RC4_SHA
  • RSA_RC2_MD5
  • RSA_IDEA_MD5
  • RSA_IDEA_SHA
  • RSA_DES_MD5
  • RSA_DES_SHA
  • RSA_3DES_MD5
  • RSA_3DES_SHA
  • RSA_AES128_SHA
  • RSA_AES256_SHA
  • DH_DSS_DES_SHA
  • DH_DSS_3DES_SHA
  • DH_DSS_AES128_SHA
  • DH_DSS_AES256_SHA
  • DH_RSA_DES_SHA
  • DH_RSA_3DES_SHA
  • DH_RSA_AES128_SHA
  • DH_RSA_AES256_SHA
  • DHE_DSS_DES_SHA
  • DHE_DSS_3DES_SHA
  • DHE_DSS_AES128_SHA
  • DHE_DSS_AES256_SHA
  • DHE_RSA_DES_SHA
  • DHE_RSA_3DES_SHA
  • DHE_RSA_AES128_SHA
  • DHE_RSA_AES256_SHA
  • DH_ANON_RC4_MD5
  • DH_ANON_DES_SHA
  • DH_ANON_3DES_SHA
  • DH_ANON_AES128_SHA
  • DH_ANON_AES256_SHA
  • RSA_RC2_MD5_EXPORT
  • RSA_RC4_MD5_EXPORT
  • RSA_DES_SHA_EXPORT
  • DH_DSS_DES_SHA_EXPORT
  • DH_RSA_DES_SHA_EXPORT
  • DHE_DSS_DES_SHA_EXPORT
  • DHE_RSA_DES_SHA_EXPORT
  • DH_ANON_RC4_MD5_EXPORT
  • DH_ANON_DES_SHA_EXPORT
  • RSA_CAMELLIA128_SHA
  • DH_DSS_CAMELLIA128_SHA
  • DH_RSA_CAMELLIA128_SHA
  • DHE_DSS_CAMELLIA128_SHA
  • DHE_RSA_CAMELLIA128_SHA
  • DH_ANON_CAMELLIA128_SHA
  • RSA_CAMELLIA256_SHA
  • DH_DSS_CAMELLIA256_SHA
  • DH_RSA_CAMELLIA256_SHA
  • DHE_DSS_CAMELLIA256_SHA
  • DHE_RSA_CAMELLIA256_SHA
  • DH_ANON_CAMELLIA256_SHA
  • PSK_RC4_SHA
  • PSK_3DES_SHA
  • PSK_AES128_SHA
  • PSK_AES256_SHA
  • DHE_PSK_RC4_SHA
  • DHE_PSK_3DES_SHA
  • DHE_PSK_AES128_SHA
  • DHE_PSK_AES256_SHA
  • RSA_PSK_RC4_SHA
  • RSA_PSK_3DES_SHA
  • RSA_PSK_AES128_SHA
  • RSA_PSK_AES256_SHA
  • RSA_SEED_SHA
  • DH_DSS_SEED_SHA
  • DH_RSA_SEED_SHA
  • DHE_DSS_SEED_SHA
  • DHE_RSA_SEED_SHA
  • DH_ANON_SEED_SHA
  • SRP_SHA_3DES_SHA
  • SRP_SHA_RSA_3DES_SHA
  • SRP_SHA_DSS_3DES_SHA
  • SRP_SHA_AES128_SHA
  • SRP_SHA_RSA_AES128_SHA
  • SRP_SHA_DSS_AES128_SHA
  • SRP_SHA_AES256_SHA
  • SRP_SHA_RSA_AES256_SHA
  • SRP_SHA_DSS_AES256_SHA
  • ECDH_ECDSA_NULL_SHA
  • ECDH_ECDSA_RC4_SHA
  • ECDH_ECDSA_3DES_SHA
  • ECDH_ECDSA_AES128_SHA
  • ECDH_ECDSA_AES256_SHA
  • ECDHE_ECDSA_NULL_SHA
  • ECDHE_ECDSA_RC4_SHA
  • ECDHE_ECDSA_3DES_SHA
  • ECDHE_ECDSA_AES128_SHA
  • ECDHE_ECDSA_AES256_SHA
  • ECDH_RSA_NULL_SHA
  • ECDH_RSA_RC4_SHA
  • ECDH_RSA_3DES_SHA
  • ECDH_RSA_AES128_SHA
  • ECDH_RSA_AES256_SHA
  • ECDHE_RSA_NULL_SHA
  • ECDHE_RSA_RC4_SHA
  • ECDHE_RSA_3DES_SHA
  • ECDHE_RSA_AES128_SHA
  • ECDHE_RSA_AES256_SHA
  • ECDH_ANON_NULL_SHA
  • ECDH_ANON_RC4_SHA
  • ECDH_ANON_3DES_SHA
  • ECDH_ANON_AES128_SHA
  • ECDH_ANON_AES256_SHA
  • RSA_NULL_SHA256
  • RSA_AES128_SHA256
  • RSA_AES256_SHA256
  • DH_DSS_AES128_SHA256
  • DH_RSA_AES128_SHA256
  • DHE_DSS_AES128_SHA256
  • DHE_RSA_AES128_SHA256
  • DH_DSS_AES256_SHA256
  • DH_RSA_AES256_SHA256
  • DHE_DSS_AES256_SHA256
  • DHE_RSA_AES256_SHA256
  • DH_ANON_AES128_SHA256
  • DH_ANON_AES256_SHA256
  • RSA_AES128_GCM_SHA256
  • RSA_AES256_GCM_SHA384
  • DHE_RSA_AES128_GCM_SHA256
  • DHE_RSA_AES256_GCM_SHA384
  • DH_RSA_AES128_GCM_SHA256
  • DH_RSA_AES256_GCM_SHA384
  • DHE_DSS_AES128_GCM_SHA256
  • DHE_DSS_AES256_GCM_SHA384
  • DH_DSS_AES128_GCM_SHA256
  • DH_DSS_AES256_GCM_SHA384
  • DH_ANON_AES128_GCM_SHA256
  • DH_ANON_AES256_GCM_SHA384
  • ECDHE_ECDSA_AES128_SHA256
  • ECDHE_ECDSA_AES256_SHA384
  • ECDH_ECDSA_AES128_SHA256
  • ECDH_ECDSA_AES256_SHA384
  • ECDHE_RSA_AES128_SHA256
  • ECDHE_RSA_AES256_SHA384
  • ECDH_RSA_AES128_SHA256
  • ECDH_RSA_AES256_SHA384
  • ECDHE_ECDSA_AES128_GCM_SHA256
  • ECDHE_ECDSA_AES256_GCM_SHA384
  • ECDH_ECDSA_AES128_GCM_SHA256
  • ECDH_ECDSA_AES256_GCM_SHA384
  • ECDHE_RSA_AES128_GCM_SHA256
  • ECDHE_RSA_AES256_GCM_SHA384
  • ECDH_RSA_AES128_GCM_SHA256
  • ECDH_RSA_AES256_GCM_SHA384
  • PSK_AES128_GCM_SHA256
  • PSK_AES256_GCM_SHA384
  • DHE_PSK_AES128_GCM_SHA256
  • DHE_PSK_AES256_GCM_SHA384
  • RSA_PSK_AES128_GCM_SHA256
  • RSA_PSK_AES256_GCM_SHA384
  • PSK_AES128_SHA256
  • PSK_AES256_SHA384
  • PSK_NULL_SHA256
  • PSK_NULL_SHA384
  • DHE_PSK_AES128_SHA256
  • DHE_PSK_AES256_SHA384
  • DHE_PSK_NULL_SHA256
  • DHE_PSK_NULL_SHA384
  • RSA_PSK_AES128_SHA256
  • RSA_PSK_AES256_SHA384
  • RSA_PSK_NULL_SHA256
  • RSA_PSK_NULL_SHA384
  • RSA_CAMELLIA128_SHA256
  • DH_DSS_CAMELLIA128_SHA256
  • DH_RSA_CAMELLIA128_SHA256
  • DHE_DSS_CAMELLIA128_SHA256
  • DHE_RSA_CAMELLIA128_SHA256
  • DH_ANON_CAMELLIA128_SHA256
  • RSA_CAMELLIA256_SHA256
  • DH_DSS_CAMELLIA256_SHA256
  • DH_RSA_CAMELLIA256_SHA256
  • DHE_DSS_CAMELLIA256_SHA256
  • DHE_RSA_CAMELLIA256_SHA256
  • DH_ANON_CAMELLIA256_SHA256
  • ECDHE_ECDSA_CAMELLIA128_SHA256
  • ECDHE_ECDSA_CAMELLIA256_SHA384
  • ECDH_ECDSA_CAMELLIA128_SHA256
  • ECDH_ECDSA_CAMELLIA256_SHA384
  • ECDHE_RSA_CAMELLIA128_SHA256
  • ECDHE_RSA_CAMELLIA256_SHA384
  • ECDH_RSA_CAMELLIA128_SHA256
  • ECDH_RSA_CAMELLIA256_SHA384
  • RSA_CAMELLIA128_GCM_SHA256
  • RSA_CAMELLIA256_GCM_SHA384
  • DHE_RSA_CAMELLIA128_GCM_SHA256
  • DHE_RSA_CAMELLIA256_GCM_SHA384
  • DH_RSA_CAMELLIA128_GCM_SHA256
  • DH_RSA_CAMELLIA256_GCM_SHA384
  • DHE_DSS_CAMELLIA128_GCM_SHA256
  • DHE_DSS_CAMELLIA256_GCM_SHA384
  • DH_DSS_CAMELLIA128_GCM_SHA256
  • DH_DSS_CAMELLIA256_GCM_SHA384
  • DH_anon_CAMELLIA128_GCM_SHA256
  • DH_anon_CAMELLIA256_GCM_SHA384
  • ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDH_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDH_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDHE_RSA_CAMELLIA128_GCM_SHA256
  • ECDHE_RSA_CAMELLIA256_GCM_SHA384
  • ECDH_RSA_CAMELLIA128_GCM_SHA256
  • ECDH_RSA_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_GCM_SHA256
  • PSK_CAMELLIA256_GCM_SHA384
  • DHE_PSK_CAMELLIA128_GCM_SHA256
  • DHE_PSK_CAMELLIA256_GCM_SHA384
  • RSA_PSK_CAMELLIA128_GCM_SHA256
  • RSA_PSK_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_SHA256
  • PSK_CAMELLIA256_SHA384
  • DHE_PSK_CAMELLIA128_SHA256
  • DHE_PSK_CAMELLIA256_SHA384
  • RSA_PSK_CAMELLIA128_SHA256
  • RSA_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_CAMELLIA128_SHA256
  • ECDHE_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_RC4_SHA
  • ECDHE_PSK_3DES_SHA
  • ECDHE_PSK_AES128_SHA
  • ECDHE_PSK_AES256_SHA
  • ECDHE_PSK_AES128_SHA256
  • ECDHE_PSK_AES256_SHA384
  • ECDHE_PSK_NULL_SHA
  • ECDHE_PSK_NULL_SHA256
  • ECDHE_PSK_NULL_SHA384
  • ECDHE_RSA_CHACHA20_POLY1305_SHA256
  • ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
  • DHE_RSA_CHACHA20_POLY1305_SHA256
  • PSK_CHACHA20_POLY1305_SHA256
  • ECDHE_PSK_CHACHA20_POLY1305_SHA256
  • DHE_PSK_CHACHA20_POLY1305_SHA256
  • RSA_PSK_CHACHA20_POLY1305_SHA256
  • AES128_GCM_SHA256
  • AES256_GCM_SHA384
  • CHACHA20_POLY1305_SHA256
  • AES128_CCM_SHA256
  • AES128_CCM8_SHA256

ecCurves
String

Defines the elliptic curves to enable.

extensions
String

Provides access to TLS extensions.

forceResumeIfDestinationChanges
Bool

Whether to force TLS session resumption when the destination address changes.

preSharedIdentity
String

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

preSharedKey
String

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

preSharedKeyCiphersuite
String

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

renegotiationAttackPreventionMode
RenegotiationAttackPreventionModes

Selects renegotiation attack prevention mechanism.

The following options are available:

crapmCompatible0TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict1Renegotiation attack prevention is enabled and enforced.
crapmAuto2Automatically choose whether to enable or disable renegotiation attack prevention.

revocationCheck
RevocationCheckKinds

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

crcNone (0)No revocation checking
crcAuto (1)Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL (2)Check all provided CRL endpoints for all chain certificates.
crcAllOCSP (3)Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP (4)Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL (5)At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP (6)At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP (7)At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL (8)At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

sslOptions
Int32

Various SSL (TLS) protocol options, set of

cssloExpectShutdownMessage0x001Wait for the close-notify message when shutting down the connection

cssloOpenSSLDTLSWorkaround0x002(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions

cssloDisableKexLengthAlignment0x004Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.

cssloForceUseOfClientCertHashAlg0x008Enforce use of client certificate hash algorithm. It is unlikely that you will ever need to adjust it.

cssloAutoAddServerNameExtension0x010Automatically add server name extension when known

cssloAcceptTrustedSRPPrimesOnly0x020Accept trusted SRP primes only

cssloDisableSignatureAlgorithmsExtension0x040Disable (not send) signature algorithms extension. It is unlikely that you will ever need to adjust it.

cssloIntolerateHigherProtocolVersions0x080(server option) Do not allow fallback from TLS versions higher than currently enabled

cssloStickToPrefCertHashAlg0x100Stick to preferred certificate hash algorithms

cssloNoImplicitTLS12Fallback0x200Disable implicit TLS 1.3 to 1.2 fallbacks

cssloUseHandshakeBatches0x400Send handshake message as large batches rather than individually

tlsMode
SSLModes

Specifies the TLS mode to use.

smDefault0
smNoTLS1Do not use TLS
smExplicitTLS2Connect to the server without any encryption and then request an SSL session.
smImplicitTLS3Connect to the specified port, and establish the SSL session at once.

useExtendedMasterSecret
Bool

Enables Extended Master Secret Extension, as defined in RFC 7627.

useSessionResumption
Bool

Enables or disables TLS session resumption capability.

versions
Int32

Th SSL/TLS versions to enable by default.

csbSSL20x01SSL 2

csbSSL30x02SSL 3

csbTLS10x04TLS 1.0

csbTLS110x08TLS 1.1

csbTLS120x10TLS 1.2

csbTLS130x20TLS 1.3

Constructors

public init()

Creates a new TLSSettings object.

Configuration Settings (ASiCSigner Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

ASiCSigner Configuration Settings

ASiCOptions:   Specifies the ASiC options.

Contains a comma-separated list of values that specifies ASiC options.

Supported values are:

UseP7MExtensionForExtendedCAdESWhen this flag is set, the *.p7m extension is used for extended CAdES signatures inside the container. Otherwise, the *.p7s extension is used.
EncodeIRIWhen this flag is set, non-ASCII characters in filenames are encoded as defined in RFC 3987 when used in XML signature or manifest.

CmsOptAnnexKArchiveTimestampV2Mode:   Toggles use of Annex K method of calculating validation timestamp hashes.

This CMS message option toggles the use of Annex K method of calculating validation timestamp hashes. Switch this option off to stick to RFC5126 p6.3.5 method.

CmsOptCheckATSHashIndexElements:   Enables extra checks when processing ATSHashIndex attribute.

This CMS message option enables an extra check to make sure every hash in ATSHashIndex has an associated CMS element.

CmsOptCompareRDNAsStrings:   Enforces comparison of RDN elements as text strings, rather than their byte encodings.

This CMS message option enforces comparison of string RDN elements as text strings rather than their original byte encodings.

CmsOptDigitPADSSCompatibility:   Enables Digit PADSS compatibility mode.

This CMS message option enables compatibility mode with Digit PADSS software.

CmsOptForceSigningCertificateV2Usage:   Enforces use of signing-certificate-v2 attribute.

This CMS message option enforces the use of signing-certificate-v2 attribute in favour of older signing-certificate-v1. Current regulations require that signing-certificate-v2 is used at all times.

CmsOptIgnoreDERReqInArchiveTimestamps:   Switches off DER encoding requirement for archival timestamps.

This CMS message option switches off DER encoding requirement for archival timestamps (normally meaning no attribute reordering). This setting is a workaround for certain buggy CAdES products.

CmsOptImzagerMIMCompatibility:   Enables Imzager MIM compatibility mode.

This CMS message option enables compatibility mode with Imzager MIM software.

CmsOptIncludeCertToAttributes:   Regulates whether to include the signing certificate to the signature as the signing-certificate attribute.

This CMS message option controls inclusion of the signing certificate as the signing-certificate attribute. Current regulations require that this attribute is present.

CmsOptIncludeCertToMessage:   Regulates whether to include the signing certificate and its chain to the CMS.

This CMS message option controls inclusion of the signing certificate to the CMS structure. It is recommended that the certificate is included. Note that this option has no effect if the signature level used (e.g. XL) enforces inclusion of the certificate to the message.

CmsOptInsertContentType:   Regulates whether the content-type time attribute should be included in the signature structure.

This CMS message option specifies whether the content-type attribute should be included in the signature structure.

CmsOptInsertMessageDigests:   Regulates whether the message-digest signed attribute should be included in the signature structure.

This CMS message option controls inclusion of the message-digest attribute in the signature structure. Current regulations require that this attribute is present at all times.

CmsOptInsertSigningTime:   Regulates whether the signing-time attribute should be included in the signature structure.

This CMS message option specifies whether the signing-time attribute should be included in the signature structure. Switch it off to suppress inclusion of the signing-time attribute.

CmsOptSkipEnvContentInfoOnSigArchival:   Excludes hashing of enveloped content when calculating an archival timestamp.

This CMS message option excludes hashing of enveloped content when calculating an archival timestamp. This setting is a workaround for certain buggy CAdES products.

CmsOptUseATSHashIndexV1:   Enables use of ATSHashIndexV1 attribute.

This CMS message option enables use of deprecated ATSHashIndexV1 attribute when calculating archival timestamp V3 hashes.

CmsOptUseGeneralizedTimeFormat:   Enables or disables encoding of the signing-time attribute using ASN.1 GENERALIZEDTIME type.

This CMS message option controls whether the signing-time attribute should be encoded as GENERALIZEDTIME or UTCTIME. Current regulations require that the GENERALIZEDTIME type is used at all times.

CmsOptUseGenericSigAlgorithmOIDs:   Enables use of generic signature algorithm OIDs in the signature.

This CMS message option enforces the use of generic public key algorithm OIDs (e.g. rsaEncryption) instead of hash algorithm-specific variants (e.g. sha256withRsaEncryption). This setting is a workaround for certain buggy CAdES products.

CmsOptUsePlainContentForTimestampHashes:   Makes CAdESSigner ignore ASN.1 content formatting when calculating timestamp hashes.

This CMS message option causes CAdESSigner to ignore ASN.1 formatting when feeding content to timestamp hashes (might make a difference with split OCTETSTRINGs for extra long contents). This option is only applicable to content timestamps and ArchivalTimestampV1's. This setting is a workaround for certain buggy CAdES products.

ContentType:   Specifies the content-type of the container.

This property represents the "/mimetype" service entry of the container. For ASiC-S the "application/vnd.etsi.asic-s+zip" content-type or the original content-type of the archived document are allowed. For ASiC-E, only the "application/vnd.etsi.asic-e+zip" is allowed.

ForceCompleteChainValidation:   Whether to check the CA certificates when the signing certificate is invalid.

Set this property to True to check issuer (CA) certificates if the signing or an intermediate chain certificate is invalid.

ForceCompleteChainValidationForTrusted:   Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.

Set this property to True to enable full chain validation for explicitly trusted intermediary or end-entity certificates. This may be useful when creating signatures to enforce completeness of the collected revocation information. It often makes sense to set this property to false when validating signatures to reduce validation time and avoid issues with badly configured environments.

GenerateMetaInfEntry:   Specifies whether the directory META-INF entry should be generated.

Set this property to False to suppress generation of the directory META-INF entry in the container/archive.

Note: ETSI ASiC Conformance Checker dislikes archives with the directory META-INF entry.

GracePeriod:   Specifies a grace period to apply during revocation information checks.

Use this property to specify a grace period (in seconds). Grace period applies to certain subprotocols, such as OCSP, and caters to the inaccuracy and/or missynchronization of clocks on different participating systems. Any time deviations within the grace period will be tolerated.

IgnoreChainValidationErrors:   Whether to ignore any certificate chain validation issues.

Enable this property to ignore any chain validation errors when creating a signature. This may be useful if the signature is created in an environment which uses different trust settings to the validation environment.

IgnoreOCSPNoCheckExtension:   Whether OCSP NoCheck extension should be ignored.

Set this property to false to make the validation engine ignore the OCSP no-check extension. You would normally need to set this property when validating severely non-compliant chains that misuse the extension, causing chain loops or other validation issues.

IgnoreSystemTrust:   Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the component should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the component should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as TrustedCertificates property) are considered trusted.

ImplicitlyTrustSelfSignedCertificates:   Whether to trust self-signed certificates.

Set this property to True to implicitly trust all self-signed certificates. Use it with care as trusting just about every self-signed certificate is unwise. One exceptional reason where this property may be handy is where a chain is validated in an environment that is not supposed to trust it (for example, a signing, rather than verifying environment, or a QA server). Trusting all self-signing certificates (which are normally trusted) allows to emulate the verifying environment without actually changing its security settings.

PolicyExplicitText:   The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified.

PolicyUNNumbers:   The noticeNumbers part of the NoticeReference CAdES or XAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES, in the form of comma-separated notice numbers.

PolicyUNOrganization:   The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES.

ProductionPlace:   The value to store in the ProductionPlace XAdES attribute.

Sets the value of the ProductionPlace XAdES attribute.

PromoteLongOCSPResponses:   Whether long OCSP responses are requested.

Set this property to True to force the class to publish 'long' form of OCSP responses. Otherwise, only BasicOCSPResponse blobs are promoted.

RefHashAlgorithm:   Specifies the hash algorithm for references.

Use this property to specify the reference's hash algorithm.

The default value is empty string, in this case, the hash algorithm specified in HashAlgorithm property is used.

RefMimeType:   Specifies the MIME type to apply to the processed file.

Assign this property with the MIME type to apply to the processed file reference, for example application/vnd.openxmlformats-officedocument.wordprocessingml.document.

To set different mime types for more than one file, subscribe to Notification event and handle the AddReference event, where you can provide a separate MIME type for every reference.

TempPath:   Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored.

TimestampResponse:   A base16-encoded timestamp response received from a TSA.

When using virtual:// timestamp endpoints, assign this property in your Notification event handler with the TSP response that you receive from the TSA. Remember to encode the response in hex (base16).

TLSChainValidationDetails:   Contains the advanced details of the TLS server certificate validation.

Check this property in TLSCertValidate event handler to access the TLS certificate validation details.

TLSChainValidationResult:   Contains the result of the TLS server certificate validation.

Check this property in TLSCertValidate event handler to obtain the TLS certificate validation result.

TLSClientAuthRequested:   Indicates whether the TLS server requests client authentication.

Check this property in TLSCertValidate event handler to find out whether the TLS server requests the client to provide the authentication certificate. If this property is set to true, provide your certificate via TLSClientChain property. Note that the component may fire this event more than once during each operation, as more than one TLS-enabled server may need to be contacted.

TLSValidationLog:   Contains the log of the TLS server certificate validation.

Check this property in TLSCertValidate event handler to retrieve the validation log of the TLS server.

TolerateMinorChainIssues:   Whether to tolerate minor chain issues.

TBD

UseMicrosoftCTL:   Enables or disables automatic use of Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UseSystemCertificates:   Enables or disables the use of the system certificates.

Use this property to tell chain validation module automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

UseUTF8Filenames:   Specifies whether to use UTF-8 filenames.

Set this property to False to use system encoding for filenames inside container.

Base Configuration Settings

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:

offNo caching (default)
localLocal caching (supported for HTTPClient, RESTClient and SOAPClient only)
globalGlobal caching

Cookies:   Gets or sets local cookies for the class (supported for HTTPClient, RESTClient and SOAPClient only).

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

Tag:   Allows to store any custom data.

Use this config property to store any custom data.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (ASiCSigner Module)

ASiCSigner Errors

1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
1048578   Class is configured incorrectly (SB_ERROR_INVALID_SETUP)
1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER) 
16777217   Unsupported level (SB_ERROR_ASIC_UNSUPPORTED_LEVEL)
16777218   Unsupported signature form (SB_ERROR_ASIC_UNSUPPORTED_SIGNATURE_FORM)
16777219   Unsupported signature type (SB_ERROR_ASIC_UNSUPPORTED_SIGNATURE_TYPE)
16777220   Unsupported extraction mode (SB_ERROR_ASIC_UNSUPPORTED_EXTRACTION_MODE)
16777221   Input file does not exist (SB_ERROR_ASIC_INPUTFILE_NOT_EXISTS)
16777222   Output file already exists (SB_ERROR_ASIC_OUTPUTFILE_ALREADY_EXISTS)

Copyright (c) 2022 /n software inc. - All rights reserved.
SecureBlackbox 2022 macOS Edition - Version 22.0 [Build 8174]