DTLSServer Module

Properties Methods Events Config Settings Errors

The DTLSServer module provides server-side functionality of the DTLS protocol.

Syntax

SecureBlackbox.Dtlsserver

Remarks

Use this component to receive data over a protected DTLS channel in your applcation.

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.


Active	Indicates whether the server is active and is listening to new connections.
BoundPort	Indicates the bound listening port.
ErrorOrigin	Indicates the endpoint where the error originates from.
ErrorSeverity	The severity of the error that happened.
ExternalCrypto	Provides access to external signing and DC parameters.
FIPSMode	Reserved.
Host	The host to bind the listening port to.
PinnedClient	Populates the pinned client details.
PinnedClientChain	Contains the certificate chain of the pinned client.
Port	Specifies the port number to listen for connections on.
PortRangeFrom	Specifies the lower limit of the listening port range for incoming connections.
PortRangeTo	Specifies the upper limit of the listening port range for incoming connections.
ServerCertificates	The server's TLS certificates.
SocketSettings	Manages network connection settings.
TLSSettings	Manages TLS layer settings.
WebsiteName	Specifies the web site name to use in the certificate.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.


BroadcastData	Broadcasts data to all connections.
BroadcastText	Broadcasts a text string to all connections.
Config	Sets or retrieves a configuration setting.
DoAction	Performs an additional action.
DropClient	Terminates a client connection.
ExportKeyMaterial	Derives key material from the session's master key using the TLS exporters scheme.
ListClients	Enumerates the connected clients.
PinClient	Takes a snapshot of the connection's properties.
ProcessPlainData	Process a plain data buffer to a connection client.
SendData	Sends a data buffer to a connection client.
SendKeepAlive	Sends a keep-alive packet.
SendPlainData	Sends a data buffer to a connection client.
SendText	Sends a text string to a client.
Start	Starts the DTLS server.
Stop	Stops the DTLS server.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.


Accept	Reports an incoming connection.
Data	Supplies a data chunk received from a client.
Error	Information about errors during data delivery.
ExternalSign	Handles remote or external signing initiated by the server protocol.
Notification	This event notifies the application about an underlying control flow event.
PlainData	Supplies a plain data chunk received from a client.
TLSCertValidate	Fires when a client certificate needs to be validated.
TLSEstablished	Reports the setup of a TLS session.
TLSHandshake	Fires when a newly established client connection initiates a TLS handshake.
TLSPSK	Requests a pre-shared key for TLS-PSK.
TLSShutdown	Reports closure of a TLS session.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.


ClientAuth	Enables or disables certificate-based client authentication.
DatagramSize	Specifies maximum size of the datagram.
DualStack	Allows the use of ip4 and ip6 simultaneously.
Host	The host to bind to.
RetransmissionInterval	Specifies value of the retransmission interval.
ServerSSLDHKeyLength	Sets the size of the TLS DHE key exchange group.
SplitLongData	Specifies whether to split long datagrams into smaller ones.
WebsiteName	The website name for the TLS certificate.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the module (supported for HTTPClient, RESTClient and SOAPClient only).
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolver	Specifies whether the client modules should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.

Active Property (DTLSServer Module)

Indicates whether the server is active and is listening to new connections.

public var active: Bool {
  get {...}
}


@property (nonatomic,readonly,assign,getter=active) BOOL active;

- (BOOL)active;

Default Value

False

Remarks

This read-only property returns True if the server is listening to incoming connections.

This property is read-only.

BoundPort Property (DTLSServer Module)

Indicates the bound listening port.

Syntax

Swift
Objective-C

public var boundPort: Int32 {
  get {...}
}


@property (nonatomic,readonly,assign,getter=boundPort) int boundPort;

- (int)boundPort;

Default Value

Remarks

Check this property to find out the port that has been allocated to the server by the system. The bound port always equals Port if it is provided, or is allocated dynamically if configured to fall in the range between PortRangeFrom and PortRangeTo constraints.

This property is read-only.

ErrorOrigin Property (DTLSServer Module)

Indicates the endpoint where the error originates from.

Syntax

Swift
Objective-C

public var errorOrigin: DtlsserverErrorOrigins {
  get {...}
  set {...}
}

public enum DtlsserverErrorOrigins: Int32 {
  case eoLocal = 0
  case eoRemote = 1
}


@property (nonatomic,readwrite,assign,getter=errorOrigin,setter=setErrorOrigin:) int errorOrigin;

- (int)errorOrigin;
- (void)setErrorOrigin :(int)newErrorOrigin;

Default Value

Remarks

Use this property to establish whether the reported error originates from a local or remote endpoint.


eoLocal	`0`
eoRemote	`1`

ErrorSeverity Property (DTLSServer Module)

The severity of the error that happened.

Syntax

Swift
Objective-C

public var errorSeverity: DtlsserverErrorSeverities {
  get {...}
  set {...}
}

public enum DtlsserverErrorSeverities: Int32 {
  case esInfo = 0
  case esWarning = 1
  case esFatal = 2
}


@property (nonatomic,readwrite,assign,getter=errorSeverity,setter=setErrorSeverity:) int errorSeverity;

- (int)errorSeverity;
- (void)setErrorSeverity :(int)newErrorSeverity;

Default Value

Remarks

Use this property to establish whether the error is fatal.


esWarning	`1`
esFatal	`2`

ExternalCrypto Property (DTLSServer Module)

Provides access to external signing and DC parameters.

Syntax

Swift
Objective-C

public var externalCrypto: ExternalCrypto {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=externalCryptoAsyncDocumentID,setter=setExternalCryptoAsyncDocumentID:) NSString* externalCryptoAsyncDocumentID;

- (NSString*)externalCryptoAsyncDocumentID;
- (void)setExternalCryptoAsyncDocumentID :(NSString*)newExternalCryptoAsyncDocumentID;

@property (nonatomic,readwrite,assign,getter=externalCryptoCustomParams,setter=setExternalCryptoCustomParams:) NSString* externalCryptoCustomParams;

- (NSString*)externalCryptoCustomParams;
- (void)setExternalCryptoCustomParams :(NSString*)newExternalCryptoCustomParams;

@property (nonatomic,readwrite,assign,getter=externalCryptoData,setter=setExternalCryptoData:) NSString* externalCryptoData;

- (NSString*)externalCryptoData;
- (void)setExternalCryptoData :(NSString*)newExternalCryptoData;

@property (nonatomic,readwrite,assign,getter=externalCryptoExternalHashCalculation,setter=setExternalCryptoExternalHashCalculation:) BOOL externalCryptoExternalHashCalculation;

- (BOOL)externalCryptoExternalHashCalculation;
- (void)setExternalCryptoExternalHashCalculation :(BOOL)newExternalCryptoExternalHashCalculation;

@property (nonatomic,readwrite,assign,getter=externalCryptoHashAlgorithm,setter=setExternalCryptoHashAlgorithm:) NSString* externalCryptoHashAlgorithm;

- (NSString*)externalCryptoHashAlgorithm;
- (void)setExternalCryptoHashAlgorithm :(NSString*)newExternalCryptoHashAlgorithm;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeyID,setter=setExternalCryptoKeyID:) NSString* externalCryptoKeyID;

- (NSString*)externalCryptoKeyID;
- (void)setExternalCryptoKeyID :(NSString*)newExternalCryptoKeyID;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeySecret,setter=setExternalCryptoKeySecret:) NSString* externalCryptoKeySecret;

- (NSString*)externalCryptoKeySecret;
- (void)setExternalCryptoKeySecret :(NSString*)newExternalCryptoKeySecret;

@property (nonatomic,readwrite,assign,getter=externalCryptoMethod,setter=setExternalCryptoMethod:) int externalCryptoMethod;

- (int)externalCryptoMethod;
- (void)setExternalCryptoMethod :(int)newExternalCryptoMethod;

@property (nonatomic,readwrite,assign,getter=externalCryptoMode,setter=setExternalCryptoMode:) int externalCryptoMode;

- (int)externalCryptoMode;
- (void)setExternalCryptoMode :(int)newExternalCryptoMode;

@property (nonatomic,readwrite,assign,getter=externalCryptoPublicKeyAlgorithm,setter=setExternalCryptoPublicKeyAlgorithm:) NSString* externalCryptoPublicKeyAlgorithm;

- (NSString*)externalCryptoPublicKeyAlgorithm;
- (void)setExternalCryptoPublicKeyAlgorithm :(NSString*)newExternalCryptoPublicKeyAlgorithm;

Default Value

"SecureBlackbox"

Remarks

Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on OnExternalSign event) and asynchronous (based on DC protocol and DCAuth signing component).

FIPSMode Property (DTLSServer Module)

Reserved.

Syntax

Swift
Objective-C

public var fipsMode: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=FIPSMode,setter=setFIPSMode:) BOOL FIPSMode;

- (BOOL)FIPSMode;
- (void)setFIPSMode :(BOOL)newFIPSMode;

Default Value

False

Remarks

This property is reserved for future use.

Host Property (DTLSServer Module)

The host to bind the listening port to.

Syntax

Swift
Objective-C

public var host: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=host,setter=setHost:) NSString* host;

- (NSString*)host;
- (void)setHost :(NSString*)newHost;

Default Value

Remarks

Use this property to specify the IP address on which to listen to incoming connections.

PinnedClient Property (DTLSServer Module)

Populates the pinned client details.

Syntax

Swift
Objective-C

public var pinnedClient: TLSClientEntry {
  get {...}
}


@property (nonatomic,readonly,assign,getter=pinnedClientAddress) NSString* pinnedClientAddress;

- (NSString*)pinnedClientAddress;

@property (nonatomic,readonly,assign,getter=pinnedClientChainValidationDetails) int pinnedClientChainValidationDetails;

- (int)pinnedClientChainValidationDetails;

@property (nonatomic,readonly,assign,getter=pinnedClientChainValidationResult) int pinnedClientChainValidationResult;

- (int)pinnedClientChainValidationResult;

@property (nonatomic,readonly,assign,getter=pinnedClientCiphersuite) NSString* pinnedClientCiphersuite;

- (NSString*)pinnedClientCiphersuite;

@property (nonatomic,readonly,assign,getter=pinnedClientClientAuthenticated) BOOL pinnedClientClientAuthenticated;

- (BOOL)pinnedClientClientAuthenticated;

@property (nonatomic,readonly,assign,getter=pinnedClientDigestAlgorithm) NSString* pinnedClientDigestAlgorithm;

- (NSString*)pinnedClientDigestAlgorithm;

@property (nonatomic,readonly,assign,getter=pinnedClientEncryptionAlgorithm) NSString* pinnedClientEncryptionAlgorithm;

- (NSString*)pinnedClientEncryptionAlgorithm;

@property (nonatomic,readonly,assign,getter=pinnedClientID) long long pinnedClientID;

- (long long)pinnedClientID;

@property (nonatomic,readonly,assign,getter=pinnedClientKeyExchangeAlgorithm) NSString* pinnedClientKeyExchangeAlgorithm;

- (NSString*)pinnedClientKeyExchangeAlgorithm;

@property (nonatomic,readonly,assign,getter=pinnedClientKeyExchangeKeyBits) int pinnedClientKeyExchangeKeyBits;

- (int)pinnedClientKeyExchangeKeyBits;

@property (nonatomic,readonly,assign,getter=pinnedClientNamedECCurve) NSString* pinnedClientNamedECCurve;

- (NSString*)pinnedClientNamedECCurve;

@property (nonatomic,readonly,assign,getter=pinnedClientPFSCipher) BOOL pinnedClientPFSCipher;

- (BOOL)pinnedClientPFSCipher;

@property (nonatomic,readonly,assign,getter=pinnedClientPort) int pinnedClientPort;

- (int)pinnedClientPort;

@property (nonatomic,readonly,assign,getter=pinnedClientPreSharedIdentity) NSString* pinnedClientPreSharedIdentity;

- (NSString*)pinnedClientPreSharedIdentity;

@property (nonatomic,readonly,assign,getter=pinnedClientPublicKeyBits) int pinnedClientPublicKeyBits;

- (int)pinnedClientPublicKeyBits;

@property (nonatomic,readonly,assign,getter=pinnedClientResumedSession) BOOL pinnedClientResumedSession;

- (BOOL)pinnedClientResumedSession;

@property (nonatomic,readonly,assign,getter=pinnedClientSecureConnection) BOOL pinnedClientSecureConnection;

- (BOOL)pinnedClientSecureConnection;

@property (nonatomic,readonly,assign,getter=pinnedClientSignatureAlgorithm) NSString* pinnedClientSignatureAlgorithm;

- (NSString*)pinnedClientSignatureAlgorithm;

@property (nonatomic,readonly,assign,getter=pinnedClientSymmetricBlockSize) int pinnedClientSymmetricBlockSize;

- (int)pinnedClientSymmetricBlockSize;

@property (nonatomic,readonly,assign,getter=pinnedClientSymmetricKeyBits) int pinnedClientSymmetricKeyBits;

- (int)pinnedClientSymmetricKeyBits;

@property (nonatomic,readonly,assign,getter=pinnedClientTotalBytesReceived) long long pinnedClientTotalBytesReceived;

- (long long)pinnedClientTotalBytesReceived;

@property (nonatomic,readonly,assign,getter=pinnedClientTotalBytesSent) long long pinnedClientTotalBytesSent;

- (long long)pinnedClientTotalBytesSent;

@property (nonatomic,readonly,assign,getter=pinnedClientValidationLog) NSString* pinnedClientValidationLog;

- (NSString*)pinnedClientValidationLog;

@property (nonatomic,readonly,assign,getter=pinnedClientVersion) NSString* pinnedClientVersion;

- (NSString*)pinnedClientVersion;

Default Value

"SecureBlackbox"

Remarks

Use this property to access the details of the client connection previously pinned with PinClient method.

PinnedClientChain Property (DTLSServer Module)

Contains the certificate chain of the pinned client.

Syntax

Swift
Objective-C

public var pinnedClientChain: Array<Certificate> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=pinnedClientCertCount) int pinnedClientCertCount;

- (int)pinnedClientCertCount;

- (NSData*)pinnedClientCertBytes:(int)pinnedClientCertIndex;

- (NSData*)pinnedClientCertCAKeyID:(int)pinnedClientCertIndex;

- (NSData*)pinnedClientCertFingerprint:(int)pinnedClientCertIndex;

- (long long)pinnedClientCertHandle:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertIssuer:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertIssuerRDN:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertKeyAlgorithm:(int)pinnedClientCertIndex;

- (int)pinnedClientCertKeyBits:(int)pinnedClientCertIndex;

- (NSData*)pinnedClientCertKeyFingerprint:(int)pinnedClientCertIndex;

- (int)pinnedClientCertKeyUsage:(int)pinnedClientCertIndex;

- (NSData*)pinnedClientCertPublicKeyBytes:(int)pinnedClientCertIndex;

- (BOOL)pinnedClientCertSelfSigned:(int)pinnedClientCertIndex;

- (NSData*)pinnedClientCertSerialNumber:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertSigAlgorithm:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertSubject:(int)pinnedClientCertIndex;

- (NSData*)pinnedClientCertSubjectKeyID:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertSubjectRDN:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertValidFrom:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertValidTo:(int)pinnedClientCertIndex;

Default Value

"SecureBlackbox"

Remarks

Use this property to access the certificate chain of the client connection pinned previously with a PinClient call.

Port Property (DTLSServer Module)

Specifies the port number to listen for connections on.

Syntax

Swift
Objective-C

public var port: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=port,setter=setPort:) int port;

- (int)port;
- (void)setPort :(int)newPort;

Default Value

Remarks

Use this property to specify the port number to listen to connections on. Standard port numbers are 80 for an HTTP server, and 443 for an HTTPS server.

Alternatively, you may specify the acceptable range of listening ports via PortRangeFrom and PortRangeTo properties. In this case the port will be allocated within the requested range by the operating system, and reported in BoundPort.

PortRangeFrom Property (DTLSServer Module)

Specifies the lower limit of the listening port range for incoming connections.

Syntax

Swift
Objective-C

public var portRangeFrom: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=portRangeFrom,setter=setPortRangeFrom:) int portRangeFrom;

- (int)portRangeFrom;
- (void)setPortRangeFrom :(int)newPortRangeFrom;

Default Value

Remarks

Use this property to specify the lower limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via Port), the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Note that this property is ignored if the Port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

PortRangeTo Property (DTLSServer Module)

Specifies the upper limit of the listening port range for incoming connections.

Syntax

Swift
Objective-C

public var portRangeTo: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=portRangeTo,setter=setPortRangeTo:) int portRangeTo;

- (int)portRangeTo;
- (void)setPortRangeTo :(int)newPortRangeTo;

Default Value

Remarks

Use this property to specify the upper limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via Port), the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Note that this property is ignored if the Port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

ServerCertificates Property (DTLSServer Module)

The server's TLS certificates.

Syntax

Swift
Objective-C

public var serverCertificates: Array<Certificate> {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=serverCertCount,setter=setServerCertCount:) int serverCertCount;

- (int)serverCertCount;
- (void)setServerCertCount :(int)newServerCertCount;

- (NSData*)serverCertBytes:(int)serverCertIndex;

- (long long)serverCertHandle:(int)serverCertIndex;
- (void)setServerCertHandle:(int)serverCertIndex :(long long)newServerCertHandle;

Default Value

"SecureBlackbox"

Remarks

Use this property to provide a list of TLS certificates for the server endpoint.

A TLS endpoint needs a certificate to be able to accept TLS connections. At least one of the certificates in the collection - the endpoint certificate - must have a private key associated with it.

The collection may include more than one endpoint certificate, and more than one chain. A typical usage scenario is to include two chains (ECDSA and RSA), to cater for clients with different cipher suite preferences.

SocketSettings Property (DTLSServer Module)

Manages network connection settings.

Syntax

Swift
Objective-C

public var socketSettings: SocketSettings {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=socketIncomingSpeedLimit,setter=setSocketIncomingSpeedLimit:) int socketIncomingSpeedLimit;

- (int)socketIncomingSpeedLimit;
- (void)setSocketIncomingSpeedLimit :(int)newSocketIncomingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketLocalAddress,setter=setSocketLocalAddress:) NSString* socketLocalAddress;

- (NSString*)socketLocalAddress;
- (void)setSocketLocalAddress :(NSString*)newSocketLocalAddress;

@property (nonatomic,readwrite,assign,getter=socketLocalPort,setter=setSocketLocalPort:) int socketLocalPort;

- (int)socketLocalPort;
- (void)setSocketLocalPort :(int)newSocketLocalPort;

@property (nonatomic,readwrite,assign,getter=socketOutgoingSpeedLimit,setter=setSocketOutgoingSpeedLimit:) int socketOutgoingSpeedLimit;

- (int)socketOutgoingSpeedLimit;
- (void)setSocketOutgoingSpeedLimit :(int)newSocketOutgoingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketTimeout,setter=setSocketTimeout:) int socketTimeout;

- (int)socketTimeout;
- (void)setSocketTimeout :(int)newSocketTimeout;

@property (nonatomic,readwrite,assign,getter=socketUseIPv6,setter=setSocketUseIPv6:) BOOL socketUseIPv6;

- (BOOL)socketUseIPv6;
- (void)setSocketUseIPv6 :(BOOL)newSocketUseIPv6;

Default Value

"SecureBlackbox"

Remarks

Use this property to tune up network connection parameters.

TLSSettings Property (DTLSServer Module)

Manages TLS layer settings.

Syntax

Swift
Objective-C

public var tlsSettings: TLSSettings {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=TLSAutoValidateCertificates,setter=setTLSAutoValidateCertificates:) BOOL TLSAutoValidateCertificates;

- (BOOL)TLSAutoValidateCertificates;
- (void)setTLSAutoValidateCertificates :(BOOL)newTLSAutoValidateCertificates;

@property (nonatomic,readwrite,assign,getter=TLSBaseConfiguration,setter=setTLSBaseConfiguration:) int TLSBaseConfiguration;

- (int)TLSBaseConfiguration;
- (void)setTLSBaseConfiguration :(int)newTLSBaseConfiguration;

@property (nonatomic,readwrite,assign,getter=TLSCiphersuites,setter=setTLSCiphersuites:) NSString* TLSCiphersuites;

- (NSString*)TLSCiphersuites;
- (void)setTLSCiphersuites :(NSString*)newTLSCiphersuites;

@property (nonatomic,readwrite,assign,getter=TLSECCurves,setter=setTLSECCurves:) NSString* TLSECCurves;

- (NSString*)TLSECCurves;
- (void)setTLSECCurves :(NSString*)newTLSECCurves;

@property (nonatomic,readwrite,assign,getter=TLSExtensions,setter=setTLSExtensions:) NSString* TLSExtensions;

- (NSString*)TLSExtensions;
- (void)setTLSExtensions :(NSString*)newTLSExtensions;

@property (nonatomic,readwrite,assign,getter=TLSForceResumeIfDestinationChanges,setter=setTLSForceResumeIfDestinationChanges:) BOOL TLSForceResumeIfDestinationChanges;

- (BOOL)TLSForceResumeIfDestinationChanges;
- (void)setTLSForceResumeIfDestinationChanges :(BOOL)newTLSForceResumeIfDestinationChanges;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedIdentity,setter=setTLSPreSharedIdentity:) NSString* TLSPreSharedIdentity;

- (NSString*)TLSPreSharedIdentity;
- (void)setTLSPreSharedIdentity :(NSString*)newTLSPreSharedIdentity;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKey,setter=setTLSPreSharedKey:) NSString* TLSPreSharedKey;

- (NSString*)TLSPreSharedKey;
- (void)setTLSPreSharedKey :(NSString*)newTLSPreSharedKey;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKeyCiphersuite,setter=setTLSPreSharedKeyCiphersuite:) NSString* TLSPreSharedKeyCiphersuite;

- (NSString*)TLSPreSharedKeyCiphersuite;
- (void)setTLSPreSharedKeyCiphersuite :(NSString*)newTLSPreSharedKeyCiphersuite;

@property (nonatomic,readwrite,assign,getter=TLSRenegotiationAttackPreventionMode,setter=setTLSRenegotiationAttackPreventionMode:) int TLSRenegotiationAttackPreventionMode;

- (int)TLSRenegotiationAttackPreventionMode;
- (void)setTLSRenegotiationAttackPreventionMode :(int)newTLSRenegotiationAttackPreventionMode;

@property (nonatomic,readwrite,assign,getter=TLSRevocationCheck,setter=setTLSRevocationCheck:) int TLSRevocationCheck;

- (int)TLSRevocationCheck;
- (void)setTLSRevocationCheck :(int)newTLSRevocationCheck;

@property (nonatomic,readwrite,assign,getter=TLSSSLOptions,setter=setTLSSSLOptions:) int TLSSSLOptions;

- (int)TLSSSLOptions;
- (void)setTLSSSLOptions :(int)newTLSSSLOptions;

@property (nonatomic,readwrite,assign,getter=TLSTLSMode,setter=setTLSTLSMode:) int TLSTLSMode;

- (int)TLSTLSMode;
- (void)setTLSTLSMode :(int)newTLSTLSMode;

@property (nonatomic,readwrite,assign,getter=TLSUseExtendedMasterSecret,setter=setTLSUseExtendedMasterSecret:) BOOL TLSUseExtendedMasterSecret;

- (BOOL)TLSUseExtendedMasterSecret;
- (void)setTLSUseExtendedMasterSecret :(BOOL)newTLSUseExtendedMasterSecret;

@property (nonatomic,readwrite,assign,getter=TLSUseSessionResumption,setter=setTLSUseSessionResumption:) BOOL TLSUseSessionResumption;

- (BOOL)TLSUseSessionResumption;
- (void)setTLSUseSessionResumption :(BOOL)newTLSUseSessionResumption;

@property (nonatomic,readwrite,assign,getter=TLSVersions,setter=setTLSVersions:) int TLSVersions;

- (int)TLSVersions;
- (void)setTLSVersions :(int)newTLSVersions;

Default Value

"SecureBlackbox"

Remarks

Use this property to tune up the TLS layer parameters.

WebsiteName Property (DTLSServer Module)

Specifies the web site name to use in the certificate.

Syntax

Swift
Objective-C

public var websiteName: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=websiteName,setter=setWebsiteName:) NSString* websiteName;

- (NSString*)websiteName;
- (void)setWebsiteName :(NSString*)newWebsiteName;

Default Value

"SecureBlackbox"

Remarks

If using an internally-generated certificate, use this property to specify the web site name to be included as a common name. A typical common name consists of the host name, such as '192.168.10.10' or 'domain.com'.

BroadcastData Method (DTLSServer Module)

Broadcasts data to all connections.

Syntax

Swift
Objective-C

public func broadcastData(connectionID: Int64, data: Data) throws -> Void

- (void)broadcastData:(long long)connectionID :(NSData*)data;

Remarks

Call this method to send Data to all active client connections except for ConnectionID. Set ConnectionID to -1 to broadcast to all connections.

BroadcastText Method (DTLSServer Module)

Broadcasts a text string to all connections.

Syntax

Swift
Objective-C

public func broadcastText(connectionId: Int64, text: String) throws -> Void

- (void)broadcastText:(long long)connectionId :(NSString*)text;

Remarks

Call this method to send Text to all active client connections except for ConnectionID. Set ConnectionID to -1 to broadcast to all connections without exceptions.

Config Method (DTLSServer Module)

Sets or retrieves a configuration setting.

Syntax

Swift
Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (DTLSServer Module)

Performs an additional action.

Syntax

Swift
Objective-C

public func doAction(actionID: String, actionParams: String) throws -> String

- (NSString*)doAction:(NSString*)actionID :(NSString*)actionParams;

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insencitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

DropClient Method (DTLSServer Module)

Terminates a client connection.

Syntax

Swift
Objective-C

public func dropClient(connectionId: Int64, forced: Bool) throws -> Void

- (void)dropClient:(long long)connectionId :(BOOL)forced;

Remarks

Call this method to shut down a connected client. Forced indicates whether the connection should be closed in a graceful manner.

ExportKeyMaterial Method (DTLSServer Module)

Derives key material from the session's master key using the TLS exporters scheme.

Syntax

Swift
Objective-C

public func exportKeyMaterial(connectionID: Int64, lbl: String, context: Data, len: Int32) throws -> Void

- (void)exportKeyMaterial:(long long)connectionID :(NSString*)lbl :(NSData*)context :(int)len;

Remarks

Some protocols - for example, SRTP - use the TLS exporters scheme to derive their own session keys from the TLS master key. This method lets you employ exporters to obtain such keys, or to generate secure keys for your own needs from an active TLS session.

The exported keys depend on the master key, and are different for every TLS session. However, a client and server sharing a session will always end up with the same key material, as long as they use the same values of Lbl, Context, and Len.

Use the ConnectionID parameter to specify the session that you would like to derive key material from.

ListClients Method (DTLSServer Module)

Enumerates the connected clients.

Syntax

Swift
Objective-C

public func listClients() throws -> String

- (NSString*)listClients;

Remarks

This method enumerates the connected clients. It returns a list of strings, with each string being of 'ConnectionID|Address|Port' format, and representing a single connection.

PinClient Method (DTLSServer Module)

Takes a snapshot of the connection's properties.

Syntax

Swift
Objective-C

public func pinClient(connectionId: Int64) throws -> Void

- (void)pinClient:(long long)connectionId;

Remarks

Use this method to take a snapshot of a connected client. The captured properties are populated in PinnedClient and PinnedClientChain properties.

ProcessPlainData Method (DTLSServer Module)

Process a plain data buffer to a connection client.

Syntax

Swift
Objective-C

public func processPlainData(connectionID: Int64, buffer: Data) throws -> Void

- (void)processPlainData:(long long)connectionID :(NSData*)buffer;

Remarks

Use this method to process a plain data buffer to a connected client. Use ConnectionID to specify the client.

SendData Method (DTLSServer Module)

Sends a data buffer to a connection client.

Syntax

Swift
Objective-C

public func sendData(connectionID: Int64, buffer: Data) throws -> Void

- (void)sendData:(long long)connectionID :(NSData*)buffer;

Remarks

Use this method to send a data buffer to a connected client. Use ConnectionID to specify the client.

SendKeepAlive Method (DTLSServer Module)

Sends a keep-alive packet.

Syntax

Swift
Objective-C

public func sendKeepAlive(connectionId: Int64) throws -> Bool

- (BOOL)sendKeepAlive:(long long)connectionId;

Remarks

Use this method to send a keep-alive packet to a client. Keep alive is an empty packet; keep-alive signals sent occasionally can be used to keep connection up.

SendPlainData Method (DTLSServer Module)

Sends a data buffer to a connection client.

Syntax

Swift
Objective-C

public func sendPlainData(connectionID: Int64, buffer: Data) throws -> Void

- (void)sendPlainData:(long long)connectionID :(NSData*)buffer;

Remarks

Use this method to send a data buffer to a connected client. Use ConnectionID to specify the client.

SendText Method (DTLSServer Module)

Sends a text string to a client.

Syntax

Swift
Objective-C

public func sendText(connectionId: Int64, text: String) throws -> Void

- (void)sendText:(long long)connectionId :(NSString*)text;

Remarks

Use this method to send a text string to a connected client.

Start Method (DTLSServer Module)

Starts the DTLS server.

Syntax

Swift
Objective-C

public func start() throws -> Void

- (void)start;

Remarks

Use this method to start listening for incoming data.

Stop Method (DTLSServer Module)

Stops the DTLS server.

Syntax

Swift
Objective-C

public func stop() throws -> Void

- (void)stop;

Remarks

Call this method to stop listening for incoming data.

Accept Event (DTLSServer Module)

Reports an incoming connection.

Syntax

Swift
Objective-C

func onAccept(remoteAddress: String, remotePort: Int32, accept: inout Bool)

- (void)onAccept:(NSString*)remoteAddress :(int)remotePort :(int*)accept;

Remarks

This event is fired when a new connection from RemoteAddress:RemotePort is ready to be accepted. Use the Accept parameter to accept or decline it.

Subscribe to Connect event to be notified of every connection that has been set up.

Data Event (DTLSServer Module)

Supplies a data chunk received from a client.

Syntax

Swift
Objective-C

func onData(connectionID: Int64, buffer: Data)

- (void)onData:(long long)connectionID :(NSData*)buffer;

Remarks

This event is fired to supply another piece of data received from a client. This event may fire multiple times.

Error Event (DTLSServer Module)

Information about errors during data delivery.

Syntax

Swift
Objective-C

func onError(connectionID: Int64, errorCode: Int32, description: String)

- (void)onError:(long long)connectionID :(int)errorCode :(NSString*)description;

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the HTTPS section.

ExternalSign Event (DTLSServer Module)

Handles remote or external signing initiated by the server protocol.

Syntax

Swift
Objective-C

func onExternalSign(connectionID: Int64, operationId: String, hashAlgorithm: String, pars: String, data: String, signedData: inout String)

- (void)onExternalSign:(long long)connectionID :(NSString*)operationId :(NSString*)hashAlgorithm :(NSString*)pars :(NSString*)data :(NSString**)signedData;

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the component via SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contain algorithm-dependent parameters.

The component uses base16 (hex) encoding for Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses a .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

Notification Event (DTLSServer Module)

This event notifies the application about an underlying control flow event.

Syntax

Swift
Objective-C

func onNotification(eventID: String, eventParam: String)

- (void)onNotification:(NSString*)eventID :(NSString*)eventParam;

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

PlainData Event (DTLSServer Module)

Supplies a plain data chunk received from a client.

Syntax

Swift
Objective-C

func onPlainData(connectionID: Int64, buffer: Data)

- (void)onPlainData:(long long)connectionID :(NSData*)buffer;

Remarks

This event is fired to supply another piece of plain data received from a client. This event may fire multiple times.

TLSCertValidate Event (DTLSServer Module)

Fires when a client certificate needs to be validated.

Syntax

Swift
Objective-C

func onTLSCertValidate(connectionID: Int64, accept: inout Bool)

- (void)onTLSCertValidate:(long long)connectionID :(int*)accept;

Remarks

The class fires this event to notify the application of an authenticating client. Use the event handler to validate the certificate and pass your decision back to the server component via the Accept parameter.

TLSEstablished Event (DTLSServer Module)

Reports the setup of a TLS session.

Syntax

Swift
Objective-C

func onTLSEstablished(connectionID: Int64)

- (void)onTLSEstablished:(long long)connectionID;

Remarks

Subscribe to this event to be notified about the setup of a TLS connection by a connected client.

TLSHandshake Event (DTLSServer Module)

Fires when a newly established client connection initiates a TLS handshake.

Syntax

Swift
Objective-C

func onTLSHandshake(connectionID: Int64, serverName: String, abort: inout Bool)

- (void)onTLSHandshake:(long long)connectionID :(NSString*)serverName :(int*)abort;

Remarks

Use this event to get notified about the initiation of the TLS handshake by the remote client. The ServerName parameter specifies the requested host from the client hello message.

TLSPSK Event (DTLSServer Module)

Requests a pre-shared key for TLS-PSK.

Syntax

Swift
Objective-C

func onTLSPSK(connectionID: Int64, identity: String, psk: inout String, ciphersuite: inout String)

- (void)onTLSPSK:(long long)connectionID :(NSString*)identity :(NSString**)PSK :(NSString**)ciphersuite;

Remarks

The class fires this event to report that a client has requested a TLS-PSK negotiation. ConnectionId indicates the unique connection ID that requested the PSK handshake.

Use Identity to look up for the corresponding pre-shared key in the server's database, then assign the key to the PSK parameter. If TLS 1.3 PSK is used, you will also need to assign the Ciphersuite parameter with the cipher suite associated with that identity and their key.

TLSShutdown Event (DTLSServer Module)

Reports closure of a TLS session.

Syntax

Swift
Objective-C

func onTLSShutdown(connectionID: Int64)

- (void)onTLSShutdown:(long long)connectionID;

Remarks

The class fires this event when a connected client closes their TLS session gracefully. This event is typically followed by a Disconnect, which marks the closure of the underlying TCP session.

Certificate Type

Provides details of an individual X.509 certificate.

Remarks

This type provides access to X.509 certificate details.

Fields

bytes
Data (read-only)
Default Value: ""

Returns raw certificate data in DER format.

ca
Bool
Default Value: False

Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).

caKeyID
Data (read-only)
Default Value: ""

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

crlDistributionPoints
String
Default Value: ""

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

curve
String
Default Value: ""

Specifies the elliptic curve of the EC public key.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

fingerprint
Data (read-only)
Default Value: ""

Contains the fingerprint (a hash imprint) of this certificate.

friendlyName
String (read-only)
Default Value: ""

Contains an associated alias (friendly name) of the certificate.

handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

hashAlgorithm
String
Default Value: ""

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

issuer
String (read-only)
Default Value: ""

The common name of the certificate issuer (CA), typically a company name.

issuerRDN
String
Default Value: ""

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

keyAlgorithm
String
Default Value: "0"

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

keyBits
Int32 (read-only)
Default Value: 0

Returns the length of the public key.

keyFingerprint
Data (read-only)
Default Value: ""

Returns a fingerprint of the public key contained in the certificate.

keyUsage
Int32
Default Value: 0

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

keyValid
Bool (read-only)
Default Value: False

Returns True if the certificate's key is cryptographically valid, and False otherwise.

ocspLocations
String
Default Value: ""

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

ocspNoCheck
Bool
Default Value: False

Accessor to the value of the certificates ocsp-no-check extension.

origin
Int32 (read-only)
Default Value: 0

Returns the origin of this certificate.

policyIDs
String
Default Value: ""

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

privateKeyBytes
Data (read-only)
Default Value: ""

Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.

privateKeyExists
Bool (read-only)
Default Value: False

Indicates whether the certificate has an associated private key.

privateKeyExtractable
Bool (read-only)
Default Value: False

Indicates whether the private key is extractable

publicKeyBytes
Data (read-only)
Default Value: ""

Contains the certificate's public key in DER format.

qualifiedStatements
QualifiedStatementsTypes
Default Value: 0

Returns the qualified status of the certificate.

selfSigned
Bool (read-only)
Default Value: False

Indicates whether the certificate is self-signed (root) or signed by an external CA.

serialNumber
Data
Default Value: ""

Returns the certificate's serial number.

sigAlgorithm
String (read-only)
Default Value: ""

Indicates the algorithm that was used by the CA to sign this certificate.

subject
String (read-only)
Default Value: ""

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

subjectAlternativeName
String
Default Value: ""

Returns or sets the value of the Subject Alternative Name extension of the certificate.

subjectKeyID
Data
Default Value: ""

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

subjectRDN
String
Default Value: ""

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

validFrom
String
Default Value: ""

The time point at which the certificate becomes valid, in UTC.

validTo
String
Default Value: ""

The time point at which the certificate expires, in UTC.

Constructors

public init(stream: )

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.

public init()

Creates a new object with default field values.

ExternalCrypto Type

Specifies the parameters of external cryptographic calls.

Remarks

External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.

Fields

asyncDocumentID
String
Default Value: ""

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

customParams
String
Default Value: ""

Custom parameters to be passed to the signing service (uninterpreted).

data
String
Default Value: ""

Additional data to be included in the async state and mirrored back by the requestor

externalHashCalculation
Bool
Default Value: False

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by all components. In particular, components operating with larger objects (PDFSigner, CAdESSigner, XAdESSigner) do not support it.

hashAlgorithm
String
Default Value: "SHA256"

Specifies the request's signature hash algorithm.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

keyID
String
Default Value: ""

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides extra protection layer for the protocol and diminishes the risk of private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

keySecret
String
Default Value: ""

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the topic.

method
AsyncSignMethods
Default Value: 0

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:


asmdPKCS1	`0`
asmdPKCS7	`1`

mode
ExternalCryptoModes
Default Value: 0

Specifies the external cryptography mode.

Available options:


ecmDefault	The default value (`0`)
ecmDisabled	Do not use DC or external signing (`1`)
ecmGeneric	Generic external signing with OnExternalSign event (`2`)
ecmDCAuth	DCAuth signing (`3`)
ecmDCAuthJSON	DCAuth signing in JSON format (`4`)

publicKeyAlgorithm
String
Default Value: ""

Provide public key algorithm here if the certificate is not available on the pre-signing stage.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Constructors

public init()

Creates a new ExternalCrypto object with default field values.

SocketSettings Type

A container for the socket settings.

Remarks

This type is a container for socket-layer parameters.

Fields

dnsMode
DNSResolveModes
Default Value: 0

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.


dmAuto	`0`
dmPlatform	`1`
dmOwn	`2`
dmOwnSecure	`3`

dnsPort
Int32
Default Value: 0

Specifies the port number to be used for sending queries to the DNS server.

dnsQueryTimeout
Int32
Default Value: 0

The timeout (in milliseconds) for each DNS query. The value of 0 indicates the infinite timeout.

dnsServers
String
Default Value: ""

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

dnsTotalTimeout
Int32
Default Value: 0

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates the infinite timeout.

incomingSpeedLimit
Int32
Default Value: 0

The maximum number of bytes to read from the socket, per second.

localAddress
String
Default Value: ""

The local network interface to bind the socket to.

localPort
Int32
Default Value: 0

The local port number to bind the socket to.

outgoingSpeedLimit
Int32
Default Value: 0

The maximum number of bytes to write to the socket, per second.

timeout
Int32
Default Value: 60000

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

useIPv6
Bool
Default Value: False

Enables or disables IP protocol version 6.

Constructors

public init()

Creates a new SocketSettings object.

TLSClientEntry Type

A container for a connected TLS client's details.

Remarks

Use this property to access the details of a particular connected client.

Fields

address
String (read-only)
Default Value: ""

The client's IP address.

chainValidationDetails
Int32 (read-only)
Default Value: 0

The details of a certificate chain validation outcome. They may often suggest what reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

chainValidationResult
ChainValidities (read-only)
Default Value: 0

The outcome of a certificate chain validation routine.

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

ciphersuite
String (read-only)
Default Value: ""

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

clientAuthenticated
Bool (read-only)
Default Value: False

Specifies whether client authentication was performed during this connection.

digestAlgorithm
String (read-only)
Default Value: ""

The digest algorithm used in a TLS-enabled connection.

encryptionAlgorithm
String (read-only)
Default Value: ""

The symmetric encryption algorithm used in a TLS-enabled connection.

id
Int64 (read-only)
Default Value: -1

The client connection's unique identifier. This value is used throughout to refer to a particular client connection.

keyExchangeAlgorithm
String (read-only)
Default Value: ""

The key exchange algorithm used in a TLS-enabled connection.

keyExchangeKeyBits
Int32 (read-only)
Default Value: 0

The length of the key exchange key of a TLS-enabled connection.

namedECCurve
String (read-only)
Default Value: ""

The elliptic curve used in this connection.

pfsCipher
Bool (read-only)
Default Value: False

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

port
Int32 (read-only)
Default Value: 0

The remote port of the client connection.

preSharedIdentity
String
Default Value: ""

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

publicKeyBits
Int32 (read-only)
Default Value: 0

The length of the public key.

resumedSession
Bool (read-only)
Default Value: False

Indicates whether a TLS-enabled connection was spawned from another TLS connection

secureConnection
Bool (read-only)
Default Value: False

Indicates whether TLS or SSL is enabled for this connection.

signatureAlgorithm
String (read-only)
Default Value: ""

The signature algorithm used in a TLS handshake.

symmetricBlockSize
Int32 (read-only)
Default Value: 0

The block size of the symmetric algorithm used.

symmetricKeyBits
Int32 (read-only)
Default Value: 0

The key length of the symmetric algorithm used.

totalBytesReceived
Int64 (read-only)
Default Value: 0

The total number of bytes received over this connection.

totalBytesSent
Int64 (read-only)
Default Value: 0

The total number of bytes sent over this connection.

validationLog
String (read-only)
Default Value: ""

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

version
String (read-only)
Default Value: ""

Indicates the version of SSL/TLS protocol negotiated during this connection.

Constructors

public init()

Creates a new TLSClientEntry object.

TLSSettings Type

A container for TLS connection settings.

Remarks

TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.

Fields

autoValidateCertificates
Bool
Default Value: True

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

baseConfiguration
SecureTransportPredefinedConfigurations
Default Value: 0

Selects the base configuration for the TLS settings. Several profiles are on offer, tuned up for different purposes, such as high security or higher compatibility.


stpcDefault	`0`
stpcCompatible	`1`
stpcComprehensiveInsecure	`2`
stpcHighlySecure	`3`

ciphersuites
String
Default Value: ""

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases that allow to blanketly enable or disable all ciphersuites at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

NULL_NULL_NULL
RSA_NULL_MD5
RSA_NULL_SHA
RSA_RC4_MD5
RSA_RC4_SHA
RSA_RC2_MD5
RSA_IDEA_MD5
RSA_IDEA_SHA
RSA_DES_MD5
RSA_DES_SHA
RSA_3DES_MD5
RSA_3DES_SHA
RSA_AES128_SHA
RSA_AES256_SHA
DH_DSS_DES_SHA
DH_DSS_3DES_SHA
DH_DSS_AES128_SHA
DH_DSS_AES256_SHA
DH_RSA_DES_SHA
DH_RSA_3DES_SHA
DH_RSA_AES128_SHA
DH_RSA_AES256_SHA
DHE_DSS_DES_SHA
DHE_DSS_3DES_SHA
DHE_DSS_AES128_SHA
DHE_DSS_AES256_SHA
DHE_RSA_DES_SHA
DHE_RSA_3DES_SHA
DHE_RSA_AES128_SHA
DHE_RSA_AES256_SHA
DH_ANON_RC4_MD5
DH_ANON_DES_SHA
DH_ANON_3DES_SHA
DH_ANON_AES128_SHA
DH_ANON_AES256_SHA
RSA_RC2_MD5_EXPORT
RSA_RC4_MD5_EXPORT
RSA_DES_SHA_EXPORT
DH_DSS_DES_SHA_EXPORT
DH_RSA_DES_SHA_EXPORT
DHE_DSS_DES_SHA_EXPORT
DHE_RSA_DES_SHA_EXPORT
DH_ANON_RC4_MD5_EXPORT
DH_ANON_DES_SHA_EXPORT
RSA_CAMELLIA128_SHA
DH_DSS_CAMELLIA128_SHA
DH_RSA_CAMELLIA128_SHA
DHE_DSS_CAMELLIA128_SHA
DHE_RSA_CAMELLIA128_SHA
DH_ANON_CAMELLIA128_SHA
RSA_CAMELLIA256_SHA
DH_DSS_CAMELLIA256_SHA
DH_RSA_CAMELLIA256_SHA
DHE_DSS_CAMELLIA256_SHA
DHE_RSA_CAMELLIA256_SHA
DH_ANON_CAMELLIA256_SHA
PSK_RC4_SHA
PSK_3DES_SHA
PSK_AES128_SHA
PSK_AES256_SHA
DHE_PSK_RC4_SHA
DHE_PSK_3DES_SHA
DHE_PSK_AES128_SHA
DHE_PSK_AES256_SHA
RSA_PSK_RC4_SHA
RSA_PSK_3DES_SHA
RSA_PSK_AES128_SHA
RSA_PSK_AES256_SHA
RSA_SEED_SHA
DH_DSS_SEED_SHA
DH_RSA_SEED_SHA
DHE_DSS_SEED_SHA
DHE_RSA_SEED_SHA
DH_ANON_SEED_SHA
SRP_SHA_3DES_SHA
SRP_SHA_RSA_3DES_SHA
SRP_SHA_DSS_3DES_SHA
SRP_SHA_AES128_SHA
SRP_SHA_RSA_AES128_SHA
SRP_SHA_DSS_AES128_SHA
SRP_SHA_AES256_SHA
SRP_SHA_RSA_AES256_SHA
SRP_SHA_DSS_AES256_SHA
ECDH_ECDSA_NULL_SHA
ECDH_ECDSA_RC4_SHA
ECDH_ECDSA_3DES_SHA
ECDH_ECDSA_AES128_SHA
ECDH_ECDSA_AES256_SHA
ECDHE_ECDSA_NULL_SHA
ECDHE_ECDSA_RC4_SHA
ECDHE_ECDSA_3DES_SHA
ECDHE_ECDSA_AES128_SHA
ECDHE_ECDSA_AES256_SHA
ECDH_RSA_NULL_SHA
ECDH_RSA_RC4_SHA
ECDH_RSA_3DES_SHA
ECDH_RSA_AES128_SHA
ECDH_RSA_AES256_SHA
ECDHE_RSA_NULL_SHA
ECDHE_RSA_RC4_SHA
ECDHE_RSA_3DES_SHA
ECDHE_RSA_AES128_SHA
ECDHE_RSA_AES256_SHA
ECDH_ANON_NULL_SHA
ECDH_ANON_RC4_SHA
ECDH_ANON_3DES_SHA
ECDH_ANON_AES128_SHA
ECDH_ANON_AES256_SHA
RSA_NULL_SHA256
RSA_AES128_SHA256
RSA_AES256_SHA256
DH_DSS_AES128_SHA256
DH_RSA_AES128_SHA256
DHE_DSS_AES128_SHA256
DHE_RSA_AES128_SHA256
DH_DSS_AES256_SHA256
DH_RSA_AES256_SHA256
DHE_DSS_AES256_SHA256
DHE_RSA_AES256_SHA256
DH_ANON_AES128_SHA256
DH_ANON_AES256_SHA256
RSA_AES128_GCM_SHA256
RSA_AES256_GCM_SHA384
DHE_RSA_AES128_GCM_SHA256
DHE_RSA_AES256_GCM_SHA384
DH_RSA_AES128_GCM_SHA256
DH_RSA_AES256_GCM_SHA384
DHE_DSS_AES128_GCM_SHA256
DHE_DSS_AES256_GCM_SHA384
DH_DSS_AES128_GCM_SHA256
DH_DSS_AES256_GCM_SHA384
DH_ANON_AES128_GCM_SHA256
DH_ANON_AES256_GCM_SHA384
ECDHE_ECDSA_AES128_SHA256
ECDHE_ECDSA_AES256_SHA384
ECDH_ECDSA_AES128_SHA256
ECDH_ECDSA_AES256_SHA384
ECDHE_RSA_AES128_SHA256
ECDHE_RSA_AES256_SHA384
ECDH_RSA_AES128_SHA256
ECDH_RSA_AES256_SHA384
ECDHE_ECDSA_AES128_GCM_SHA256
ECDHE_ECDSA_AES256_GCM_SHA384
ECDH_ECDSA_AES128_GCM_SHA256
ECDH_ECDSA_AES256_GCM_SHA384
ECDHE_RSA_AES128_GCM_SHA256
ECDHE_RSA_AES256_GCM_SHA384
ECDH_RSA_AES128_GCM_SHA256
ECDH_RSA_AES256_GCM_SHA384
PSK_AES128_GCM_SHA256
PSK_AES256_GCM_SHA384
DHE_PSK_AES128_GCM_SHA256
DHE_PSK_AES256_GCM_SHA384
RSA_PSK_AES128_GCM_SHA256
RSA_PSK_AES256_GCM_SHA384
PSK_AES128_SHA256
PSK_AES256_SHA384
PSK_NULL_SHA256
PSK_NULL_SHA384
DHE_PSK_AES128_SHA256
DHE_PSK_AES256_SHA384
DHE_PSK_NULL_SHA256
DHE_PSK_NULL_SHA384
RSA_PSK_AES128_SHA256
RSA_PSK_AES256_SHA384
RSA_PSK_NULL_SHA256
RSA_PSK_NULL_SHA384
RSA_CAMELLIA128_SHA256
DH_DSS_CAMELLIA128_SHA256
DH_RSA_CAMELLIA128_SHA256
DHE_DSS_CAMELLIA128_SHA256
DHE_RSA_CAMELLIA128_SHA256
DH_ANON_CAMELLIA128_SHA256
RSA_CAMELLIA256_SHA256
DH_DSS_CAMELLIA256_SHA256
DH_RSA_CAMELLIA256_SHA256
DHE_DSS_CAMELLIA256_SHA256
DHE_RSA_CAMELLIA256_SHA256
DH_ANON_CAMELLIA256_SHA256
ECDHE_ECDSA_CAMELLIA128_SHA256
ECDHE_ECDSA_CAMELLIA256_SHA384
ECDH_ECDSA_CAMELLIA128_SHA256
ECDH_ECDSA_CAMELLIA256_SHA384
ECDHE_RSA_CAMELLIA128_SHA256
ECDHE_RSA_CAMELLIA256_SHA384
ECDH_RSA_CAMELLIA128_SHA256
ECDH_RSA_CAMELLIA256_SHA384
RSA_CAMELLIA128_GCM_SHA256
RSA_CAMELLIA256_GCM_SHA384
DHE_RSA_CAMELLIA128_GCM_SHA256
DHE_RSA_CAMELLIA256_GCM_SHA384
DH_RSA_CAMELLIA128_GCM_SHA256
DH_RSA_CAMELLIA256_GCM_SHA384
DHE_DSS_CAMELLIA128_GCM_SHA256
DHE_DSS_CAMELLIA256_GCM_SHA384
DH_DSS_CAMELLIA128_GCM_SHA256
DH_DSS_CAMELLIA256_GCM_SHA384
DH_anon_CAMELLIA128_GCM_SHA256
DH_anon_CAMELLIA256_GCM_SHA384
ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
ECDH_ECDSA_CAMELLIA128_GCM_SHA256
ECDH_ECDSA_CAMELLIA256_GCM_SHA384
ECDHE_RSA_CAMELLIA128_GCM_SHA256
ECDHE_RSA_CAMELLIA256_GCM_SHA384
ECDH_RSA_CAMELLIA128_GCM_SHA256
ECDH_RSA_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_GCM_SHA256
PSK_CAMELLIA256_GCM_SHA384
DHE_PSK_CAMELLIA128_GCM_SHA256
DHE_PSK_CAMELLIA256_GCM_SHA384
RSA_PSK_CAMELLIA128_GCM_SHA256
RSA_PSK_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_SHA256
PSK_CAMELLIA256_SHA384
DHE_PSK_CAMELLIA128_SHA256
DHE_PSK_CAMELLIA256_SHA384
RSA_PSK_CAMELLIA128_SHA256
RSA_PSK_CAMELLIA256_SHA384
ECDHE_PSK_CAMELLIA128_SHA256
ECDHE_PSK_CAMELLIA256_SHA384
ECDHE_PSK_RC4_SHA
ECDHE_PSK_3DES_SHA
ECDHE_PSK_AES128_SHA
ECDHE_PSK_AES256_SHA
ECDHE_PSK_AES128_SHA256
ECDHE_PSK_AES256_SHA384
ECDHE_PSK_NULL_SHA
ECDHE_PSK_NULL_SHA256
ECDHE_PSK_NULL_SHA384
ECDHE_RSA_CHACHA20_POLY1305_SHA256
ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
DHE_RSA_CHACHA20_POLY1305_SHA256
PSK_CHACHA20_POLY1305_SHA256
ECDHE_PSK_CHACHA20_POLY1305_SHA256
DHE_PSK_CHACHA20_POLY1305_SHA256
RSA_PSK_CHACHA20_POLY1305_SHA256
AES128_GCM_SHA256
AES256_GCM_SHA384
CHACHA20_POLY1305_SHA256
AES128_CCM_SHA256
AES128_CCM8_SHA256

ecCurves
String
Default Value: ""

Defines the elliptic curves to enable.

extensions
String
Default Value: ""

Provides access to TLS extensions.

forceResumeIfDestinationChanges
Bool
Default Value: False

Whether to force TLS session resumption when the destination address changes.

preSharedIdentity
String
Default Value: ""

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

preSharedKey
String
Default Value: ""

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

preSharedKeyCiphersuite
String
Default Value: ""

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

renegotiationAttackPreventionMode
RenegotiationAttackPreventionModes
Default Value: 0

Selects renegotiation attack prevention mechanism.

The following options are available:


crapmCompatible	`0`	TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict	`1`	Renegotiation attack prevention is enabled and enforced.
crapmAuto	`2`	Automatically choose whether to enable or disable renegotiation attack prevention.

revocationCheck
RevocationCheckKinds
Default Value: 1

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.


crcNone	`0`	No revocation checking
crcAuto	`1`	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL	`2`	Check all provided CRL endpoints for all chain certificates.
crcAllOCSP	`3`	Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP	`4`	Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL	`5`	At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP	`6`	At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP	`7`	At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL	`8`	At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

sslOptions
Int32
Default Value: 16

Various SSL (TLS) protocol options, set of


cssloExpectShutdownMessage	`0x001`	Wait for the close-notify message when shutting down the connection
cssloOpenSSLDTLSWorkaround	`0x002`	(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions
cssloDisableKexLengthAlignment	`0x004`	Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.
cssloForceUseOfClientCertHashAlg	`0x008`	Enforce use of client certificate hash algorithm. It is unlikely that you will ever need to adjust it.
cssloAutoAddServerNameExtension	`0x010`	Automatically add server name extension when known
cssloAcceptTrustedSRPPrimesOnly	`0x020`	Accept trusted SRP primes only
cssloDisableSignatureAlgorithmsExtension	`0x040`	Disable (not send) signature algorithms extension. It is unlikely that you will ever need to adjust it.
cssloIntolerateHigherProtocolVersions	`0x080`	(server option) Do not allow fallback from TLS versions higher than currently enabled
cssloStickToPrefCertHashAlg	`0x100`	Stick to preferred certificate hash algorithms
cssloNoImplicitTLS12Fallback	`0x200`	Disable implicit TLS 1.3 to 1.2 fallbacks
cssloUseHandshakeBatches	`0x400`	Send handshake message as large batches rather than individually

tlsMode
SSLModes
Default Value: 0

Specifies the TLS mode to use.


smDefault	`0`
smNoTLS	`1`	Do not use TLS
smExplicitTLS	`2`	Connect to the server without any encryption and then request an SSL session.
smImplicitTLS	`3`	Connect to the specified port, and establish the SSL session at once.
smMixedTLS	`4`	Connect to the specified port, and establish the SSL session at once, allow plain data.

useExtendedMasterSecret
Bool
Default Value: False

Enables Extended Master Secret Extension, as defined in RFC 7627.

useSessionResumption
Bool
Default Value: False

Enables or disables TLS session resumption capability.

versions
Int32
Default Value: 16

The SSL/TLS versions to enable by default.


csbSSL2	`0x01`	SSL 2
csbSSL3	`0x02`	SSL 3
csbTLS1	`0x04`	TLS 1.0
csbTLS11	`0x08`	TLS 1.1
csbTLS12	`0x10`	TLS 1.2
csbTLS13	`0x20`	TLS 1.3

Constructors

public init()

Creates a new TLSSettings object.

Config Settings (DTLSServer Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

DTLSServer Config Settings

ClientAuth: Enables or disables certificate-based client authentication.

Set this property to one of the below values to tune up the client authentication logic:


0		No client authentication (the default setting)
1		Request certificates. The server will ask connecting clients for their certificates. Non-authenticated client connections will be accepted anyway.
2		Require certificates. The server will ask connecting clients for their certificates. If a client fails to provide a certificate, the server will terminate the connection.

If this property is set to 1 or 2, the component will request certificates from the connecting clients. Depending on the setting, the clients that fail to provide their certificate in response will be allowed or disallowed to proceed with the connection. The server signals about a received certificate by firing its CertificateValidate event. Use PinClient method in the event handler to pin the client details, and access the provided certificate chain via the PinnedClientChain property.

Note that this event is fired from the connecting clients threads, so please make sure you avoid bottlenecks in the event handler and put appropriate thread safety measures in place.

Unlike the client-side components, the server component does not perform automated certificate validation against the local security policy. You must perform appropriate certificate validation steps in your CertificateValidate event handler.

DatagramSize: Specifies maximum size of the datagram.

Use this property to get or set maximum size of the datagram. Data pieces larger than DatagramSize will be split into several smaller datagrams with lengths smaller (or equal) to the DatagramSize.

DualStack: Allows the use of ip4 and ip6 simultaneously.

This setting specifies a socket can use ip4 and ip6 simultaneously.

Host: The host to bind to.

Specifies a specific interface the server should listen on.

RetransmissionInterval: Specifies value of the retransmission interval.

Use this property to specify the period of time in milliseconds, after which the client will repeat sending. Set this property to 0 to disable the retransmission timer. Defaul value is 1000 (i.e. 1 second).

ServerSSLDHKeyLength: Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

SplitLongData: Specifies whether to split long datagrams into smaller ones.

If this prperty is set to True, datagrams larger than MaxDataSize will be split into smaller ones. Default value is True.

WebsiteName: The website name for the TLS certificate.

Assign this property with a name to put in a self-generated TLS certificate.

Base Config Settings

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:


off		No caching (default)
local		Local caching (supported for HTTPClient, RESTClient and SOAPClient only)
global		Global caching

Cookies: Gets or sets local cookies for the class (supported for HTTPClient, RESTClient and SOAPClient only).

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (DTLSServer Module)

DTLSServer Errors


	1048577 Invalid parameter value (`SB_ERROR_INVALID_PARAMETER`)
	1048578 Class is configured incorrectly (`SB_ERROR_INVALID_SETUP`)
	1048579 Operation cannot be executed in the current state (`SB_ERROR_INVALID_STATE`)
	1048580 Attempt to set an invalid value to a property (`SB_ERROR_INVALID_VALUE`)
	1048581 Certificate does not have its private key loaded (`SB_ERROR_NO_PRIVATE_KEY`)
	1048581 Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)