WebDAVClient Module
Properties Methods Events Config Settings Errors
The WebDAVClient module provides client-side functionality of the WebDAV protocol.
Syntax
SecureBlackbox.Webdavclient
Remarks
WebDAVClient is capable of making requests to DAV servers via TLS-enabled or plain TCP channels. It supports most of file operations offered by WebDAV servers, such as downloads, uploads, and file system operations.
Property List
The following is the full list of the properties of the module with short descriptions. Click on the links for further details.
BaseURL | The base URL. |
ClientChain | The TLS client certificate chain. |
Connected | Indicates whether the connection is active. |
ConnectionInfo | Returns the details of the underlying network connection. |
CurrentListEntry | Populates the details of a list entry. |
CurrentLocks | The list of current object locks. |
EncodeURL | Enables or disables URL encoding. |
ExternalCrypto | Provides access to external signing and DC parameters. |
FIPSMode | Reserved. |
KnownCertificates | Additional certificates for chain validation. |
KnownCRLs | Additional CRLs for chain validation. |
KnownOCSPs | Additional OCSP responses for chain validation. |
LockDepth | Specifies the depth of the current lock. |
LockScope | Specifies the scope of the current lock. |
LockTimeout | Specifies the timeout of the current lock. |
MoveToRename | Enables move-to-rename operation handling mode. |
OverwriteOnCopy | Enables overwriting on copy. |
OverwriteOnMove | Enables overwriting on move. |
Password | A password to authenticate to the server. |
Proxy | The proxy server settings. |
ResourceOwner | Indicates the resource owner. |
ServerChain | The TLS server's certificate chain. |
SocketSettings | Manages network connection settings. |
TLSSettings | Manages TLS layer settings. |
TrustedCertificates | A list of trusted certificates for chain validation. |
Username | A username to authenticate to the server. |
Method List
The following is the full list of the methods of the module with short descriptions. Click on the links for further details.
Config | Sets or retrieves a configuration setting. |
Connect | Establishes connection to a WebDAV server. |
Copy | Copies a remote file. |
CustomRequest | Performs custom WebDAV request. |
DeleteDir | Removes a remote directory. |
DeleteFile | Deletes a remote file. |
DirExists | Checks if a directory exists on the server. |
Disconnect | Disconnects from the server. |
DoAction | Performs an additional action. |
DownloadFile | Downloads a file from the server. |
FileExists | Checks if a file exists on the server. |
GetFileSize | Requests the size of a remote file. |
ListDir | Lists the remote directory contents. |
ListDirRecursive | Lists the remote directory contents, recursively. |
Lock | Sets up a lock on a URL. |
MakeDir | Creates a directory on the server. |
MoveFile | Moves an object. |
RefreshLock | Refreshes an object lock. |
Rename | Renames an object. |
Unlock | Removes a lock from a URL. |
UploadFile | Uploads a file to the server. |
Event List
The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.
Error | Information about connection and request errors. |
ExternalSign | Handles remote or external signing initiated by the SignExternal method or other source. |
ListEntry | Passes the next directory listing entry to the application. |
Notification | This event notifies the application about an underlying control flow event. |
OperationError | Reports a protocol error. |
Progress | Fires periodically during the data transfer. |
TLSCertNeeded | Fires when a remote TLS party requests a client certificate. |
TLSCertValidate | This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance. |
TLSEstablished | Fires when a TLS handshake with Host successfully completes. |
TLSHandshake | Fires when a new TLS handshake is initiated, before the handshake commences. |
TLSPSK | Notifies the application about the PSK key exchange. |
TLSShutdown | Reports the graceful closure of a TLS connection. |
Config Settings
The following is a list of config settings for the module with short descriptions. Click on the links for further details.
ErrorOrigin | Specifies where the error has been originated. |
ErrorSeverity | Error severity. |
IgnoreSystemTrust | Whether trusted Windows Certificate Stores should be treated as trusted. |
MoveToRename | Use MOVE operation to rename objects. |
OverwriteOnCopy | Overwrite any existing target objects during COPY. |
OverwriteOnMove | Overwrite any existing target objects during MOVE. |
TempPath | Path for storing temporary files. |
TolerateMinorChainIssues | Whether to tolerate minor chain issues. |
UseMicrosoftCTL | Enables or disables the automatic use of the Microsoft online certificate trust list. |
UseOptionsForExistenceCheck | Use OPTIONS request to query the server for object existence. |
UseSystemCertificates | Enables or disables the use of the system certificates. |
CheckKeyIntegrityBeforeUse | Enables or disable private key integrity check before use. |
CookieCaching | Specifies whether a cookie cache should be used for HTTP(S) transports. |
Cookies | Gets or sets local cookies for the module. |
DefDeriveKeyIterations | Specifies the default key derivation algorithm iteration count. |
EnableClientSideSSLFFDHE | Enables or disables finite field DHE key exchange support in TLS clients. |
GlobalCookies | Gets or sets global cookies for all the HTTP transports. |
HttpUserAgent | Specifies the user agent name to be used by all HTTP clients. |
LogDestination | Specifies the debug log destination. |
LogDetails | Specifies the debug log details to dump. |
LogFile | Specifies the debug log filename. |
LogFilters | Specifies the debug log filters. |
LogFlushMode | Specifies the log flush mode. |
LogLevel | Specifies the debug log level. |
LogMaxEventCount | Specifies the maximum number of events to cache before further action is taken. |
LogRotationMode | Specifies the log rotation mode. |
MaxASN1BufferLength | Specifies the maximal allowed length for ASN.1 primitive tag data. |
MaxASN1TreeDepth | Specifies the maximal depth for processed ASN.1 trees. |
OCSPHashAlgorithm | Specifies the hash algorithm to be used to identify certificates in OCSP requests. |
StaticDNS | Specifies whether static DNS rules should be used. |
StaticIPAddress[domain] | Gets or sets an IP address for the specified domain name. |
StaticIPAddresses | Gets or sets all the static DNS rules. |
Tag | Allows to store any custom data. |
TLSSessionGroup | Specifies the group name of TLS sessions to be used for session resumption. |
TLSSessionLifetime | Specifies lifetime in seconds of the cached TLS session. |
TLSSessionPurgeInterval | Specifies how often the session cache should remove the expired TLS sessions. |
UseOwnDNSResolver | Specifies whether the client modules should use own DNS resolver. |
UseSharedSystemStorages | Specifies whether the validation engine should use a global per-process copy of the system certificate stores. |
UseSystemOAEPAndPSS | Enforces or disables the use of system-driven RSA OAEP and PSS computations. |
UseSystemRandom | Enables or disables the use of the OS PRNG. |
BaseURL Property (WebDAVClient Module)
The base URL.
Syntax
public var baseURL: String { get {...} }
@property (nonatomic,readonly,assign,getter=baseURL) NSString* baseURL; - (NSString*)baseURL;
Default Value
""
Remarks
This property returns the base URL on the WebDAV server.
This property is read-only.
ClientChain Property (WebDAVClient Module)
The TLS client certificate chain.
Syntax
public var clientChain: Array<Certificate> { get {...} }
@property (nonatomic,readwrite,assign,getter=clientCertCount,setter=setClientCertCount:) int clientCertCount; - (int)clientCertCount; - (void)setClientCertCount :(int)newClientCertCount; - (NSData*)clientCertBytes:(int)clientCertIndex; - (long long)clientCertHandle:(int)clientCertIndex; - (void)setClientCertHandle:(int)clientCertIndex :(long long)newClientCertHandle;
Default Value
""
Remarks
Assign a certificate chain to this property to enable TLS client authentication in the class. Note that the client's end-entity certificate should have a private key associated with it.
Use CertificateStorage or CertificateManager components to import the certificate from a file, system store, or PKCS11 device.
Connected Property (WebDAVClient Module)
Indicates whether the connection is active.
Syntax
public var connected: Bool { get {...} }
@property (nonatomic,readonly,assign,getter=connected) BOOL connected; - (BOOL)connected;
Default Value
False
Remarks
Use this property to check if the connection is alive.
This property is read-only.
ConnectionInfo Property (WebDAVClient Module)
Returns the details of the underlying network connection.
Syntax
public var connectionInfo: ConnectionInfo { get {...} }
@property (nonatomic,readonly,assign,getter=connInfoAEADCipher) BOOL connInfoAEADCipher; - (BOOL)connInfoAEADCipher; @property (nonatomic,readonly,assign,getter=connInfoChainValidationDetails) int connInfoChainValidationDetails; - (int)connInfoChainValidationDetails; @property (nonatomic,readonly,assign,getter=connInfoChainValidationResult) int connInfoChainValidationResult; - (int)connInfoChainValidationResult; @property (nonatomic,readonly,assign,getter=connInfoCiphersuite) NSString* connInfoCiphersuite; - (NSString*)connInfoCiphersuite; @property (nonatomic,readonly,assign,getter=connInfoClientAuthenticated) BOOL connInfoClientAuthenticated; - (BOOL)connInfoClientAuthenticated; @property (nonatomic,readonly,assign,getter=connInfoClientAuthRequested) BOOL connInfoClientAuthRequested; - (BOOL)connInfoClientAuthRequested; @property (nonatomic,readonly,assign,getter=connInfoConnectionEstablished) BOOL connInfoConnectionEstablished; - (BOOL)connInfoConnectionEstablished; @property (nonatomic,readonly,assign,getter=connInfoConnectionID) NSData* connInfoConnectionID; - (NSData*)connInfoConnectionID; @property (nonatomic,readonly,assign,getter=connInfoDigestAlgorithm) NSString* connInfoDigestAlgorithm; - (NSString*)connInfoDigestAlgorithm; @property (nonatomic,readonly,assign,getter=connInfoEncryptionAlgorithm) NSString* connInfoEncryptionAlgorithm; - (NSString*)connInfoEncryptionAlgorithm; @property (nonatomic,readonly,assign,getter=connInfoExportable) BOOL connInfoExportable; - (BOOL)connInfoExportable; @property (nonatomic,readonly,assign,getter=connInfoKeyExchangeAlgorithm) NSString* connInfoKeyExchangeAlgorithm; - (NSString*)connInfoKeyExchangeAlgorithm; @property (nonatomic,readonly,assign,getter=connInfoKeyExchangeKeyBits) int connInfoKeyExchangeKeyBits; - (int)connInfoKeyExchangeKeyBits; @property (nonatomic,readonly,assign,getter=connInfoNamedECCurve) NSString* connInfoNamedECCurve; - (NSString*)connInfoNamedECCurve; @property (nonatomic,readonly,assign,getter=connInfoPFSCipher) BOOL connInfoPFSCipher; - (BOOL)connInfoPFSCipher; @property (nonatomic,readonly,assign,getter=connInfoPreSharedIdentityHint) NSString* connInfoPreSharedIdentityHint; - (NSString*)connInfoPreSharedIdentityHint; @property (nonatomic,readonly,assign,getter=connInfoPublicKeyBits) int connInfoPublicKeyBits; - (int)connInfoPublicKeyBits; @property (nonatomic,readonly,assign,getter=connInfoResumedSession) BOOL connInfoResumedSession; - (BOOL)connInfoResumedSession; @property (nonatomic,readonly,assign,getter=connInfoSecureConnection) BOOL connInfoSecureConnection; - (BOOL)connInfoSecureConnection; @property (nonatomic,readonly,assign,getter=connInfoServerAuthenticated) BOOL connInfoServerAuthenticated; - (BOOL)connInfoServerAuthenticated; @property (nonatomic,readonly,assign,getter=connInfoSignatureAlgorithm) NSString* connInfoSignatureAlgorithm; - (NSString*)connInfoSignatureAlgorithm; @property (nonatomic,readonly,assign,getter=connInfoSymmetricBlockSize) int connInfoSymmetricBlockSize; - (int)connInfoSymmetricBlockSize; @property (nonatomic,readonly,assign,getter=connInfoSymmetricKeyBits) int connInfoSymmetricKeyBits; - (int)connInfoSymmetricKeyBits; @property (nonatomic,readonly,assign,getter=connInfoTotalBytesReceived) long long connInfoTotalBytesReceived; - (long long)connInfoTotalBytesReceived; @property (nonatomic,readonly,assign,getter=connInfoTotalBytesSent) long long connInfoTotalBytesSent; - (long long)connInfoTotalBytesSent; @property (nonatomic,readonly,assign,getter=connInfoValidationLog) NSString* connInfoValidationLog; - (NSString*)connInfoValidationLog; @property (nonatomic,readonly,assign,getter=connInfoVersion) NSString* connInfoVersion; - (NSString*)connInfoVersion;
Default Value
""
Remarks
Use this property to learn about the connection setup, such as the protocol security details and amounts of data transferred each way.
CurrentListEntry Property (WebDAVClient Module)
Populates the details of a list entry.
Syntax
public var currentListEntry: WebDAVListEntry { get {...} }
@property (nonatomic,readonly,assign,getter=currListEntryATime) NSString* currListEntryATime; - (NSString*)currListEntryATime; @property (nonatomic,readonly,assign,getter=currListEntryContentType) NSString* currListEntryContentType; - (NSString*)currListEntryContentType; @property (nonatomic,readonly,assign,getter=currListEntryCTime) NSString* currListEntryCTime; - (NSString*)currListEntryCTime; @property (nonatomic,readonly,assign,getter=currListEntryDirectory) BOOL currListEntryDirectory; - (BOOL)currListEntryDirectory; @property (nonatomic,readonly,assign,getter=currListEntryDisplayName) NSString* currListEntryDisplayName; - (NSString*)currListEntryDisplayName; @property (nonatomic,readonly,assign,getter=currListEntryETag) NSString* currListEntryETag; - (NSString*)currListEntryETag; @property (nonatomic,readonly,assign,getter=currListEntryFullURL) NSString* currListEntryFullURL; - (NSString*)currListEntryFullURL; @property (nonatomic,readonly,assign,getter=currListEntryMTime) NSString* currListEntryMTime; - (NSString*)currListEntryMTime; @property (nonatomic,readonly,assign,getter=currListEntryParentURL) NSString* currListEntryParentURL; - (NSString*)currListEntryParentURL; @property (nonatomic,readonly,assign,getter=currListEntrySize) long long currListEntrySize; - (long long)currListEntrySize; @property (nonatomic,readonly,assign,getter=currListEntrySupportsExclusiveLock) BOOL currListEntrySupportsExclusiveLock; - (BOOL)currListEntrySupportsExclusiveLock; @property (nonatomic,readonly,assign,getter=currListEntrySupportsSharedLock) BOOL currListEntrySupportsSharedLock; - (BOOL)currListEntrySupportsSharedLock; @property (nonatomic,readonly,assign,getter=currListEntryURL) NSString* currListEntryURL; - (NSString*)currListEntryURL;
Default Value
""
Remarks
When processing the rmListDir; results, the class reports directory entries one-by-one using ListEntry event. Right before calling ListEntry, it populates the details of the object in this property.
CurrentLocks Property (WebDAVClient Module)
The list of current object locks.
Syntax
public var currentLocks: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=currentLocks,setter=setCurrentLocks:) NSString* currentLocks; - (NSString*)currentLocks; - (void)setCurrentLocks :(NSString*)newCurrentLocks;
Default Value
""
Remarks
Use this property to get the list of current object locks.
EncodeURL Property (WebDAVClient Module)
Enables or disables URL encoding.
Syntax
public var encodeURL: Bool { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=encodeURL,setter=setEncodeURL:) BOOL encodeURL; - (BOOL)encodeURL; - (void)setEncodeURL :(BOOL)newEncodeURL;
Default Value
True
Remarks
Use this property to enable or disable URL encoding.
ExternalCrypto Property (WebDAVClient Module)
Provides access to external signing and DC parameters.
Syntax
public var externalCrypto: ExternalCrypto { get {...} }
@property (nonatomic,readwrite,assign,getter=externalCryptoAsyncDocumentID,setter=setExternalCryptoAsyncDocumentID:) NSString* externalCryptoAsyncDocumentID; - (NSString*)externalCryptoAsyncDocumentID; - (void)setExternalCryptoAsyncDocumentID :(NSString*)newExternalCryptoAsyncDocumentID; @property (nonatomic,readwrite,assign,getter=externalCryptoCustomParams,setter=setExternalCryptoCustomParams:) NSString* externalCryptoCustomParams; - (NSString*)externalCryptoCustomParams; - (void)setExternalCryptoCustomParams :(NSString*)newExternalCryptoCustomParams; @property (nonatomic,readwrite,assign,getter=externalCryptoData,setter=setExternalCryptoData:) NSString* externalCryptoData; - (NSString*)externalCryptoData; - (void)setExternalCryptoData :(NSString*)newExternalCryptoData; @property (nonatomic,readwrite,assign,getter=externalCryptoExternalHashCalculation,setter=setExternalCryptoExternalHashCalculation:) BOOL externalCryptoExternalHashCalculation; - (BOOL)externalCryptoExternalHashCalculation; - (void)setExternalCryptoExternalHashCalculation :(BOOL)newExternalCryptoExternalHashCalculation; @property (nonatomic,readwrite,assign,getter=externalCryptoHashAlgorithm,setter=setExternalCryptoHashAlgorithm:) NSString* externalCryptoHashAlgorithm; - (NSString*)externalCryptoHashAlgorithm; - (void)setExternalCryptoHashAlgorithm :(NSString*)newExternalCryptoHashAlgorithm; @property (nonatomic,readwrite,assign,getter=externalCryptoKeyID,setter=setExternalCryptoKeyID:) NSString* externalCryptoKeyID; - (NSString*)externalCryptoKeyID; - (void)setExternalCryptoKeyID :(NSString*)newExternalCryptoKeyID; @property (nonatomic,readwrite,assign,getter=externalCryptoKeySecret,setter=setExternalCryptoKeySecret:) NSString* externalCryptoKeySecret; - (NSString*)externalCryptoKeySecret; - (void)setExternalCryptoKeySecret :(NSString*)newExternalCryptoKeySecret; @property (nonatomic,readwrite,assign,getter=externalCryptoMethod,setter=setExternalCryptoMethod:) int externalCryptoMethod; - (int)externalCryptoMethod; - (void)setExternalCryptoMethod :(int)newExternalCryptoMethod; @property (nonatomic,readwrite,assign,getter=externalCryptoMode,setter=setExternalCryptoMode:) int externalCryptoMode; - (int)externalCryptoMode; - (void)setExternalCryptoMode :(int)newExternalCryptoMode; @property (nonatomic,readwrite,assign,getter=externalCryptoPublicKeyAlgorithm,setter=setExternalCryptoPublicKeyAlgorithm:) NSString* externalCryptoPublicKeyAlgorithm; - (NSString*)externalCryptoPublicKeyAlgorithm; - (void)setExternalCryptoPublicKeyAlgorithm :(NSString*)newExternalCryptoPublicKeyAlgorithm;
Default Value
""
Remarks
Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on the ExternalSign event) and asynchronous (based on the DC protocol and the DCAuth signing component).
FIPSMode Property (WebDAVClient Module)
Reserved.
Syntax
public var fipsMode: Bool { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=FIPSMode,setter=setFIPSMode:) BOOL FIPSMode; - (BOOL)FIPSMode; - (void)setFIPSMode :(BOOL)newFIPSMode;
Default Value
False
Remarks
This property is reserved for future use.
KnownCertificates Property (WebDAVClient Module)
Additional certificates for chain validation.
Syntax
public var knownCertificates: Array<Certificate> { get {...} }
@property (nonatomic,readwrite,assign,getter=knownCertCount,setter=setKnownCertCount:) int knownCertCount; - (int)knownCertCount; - (void)setKnownCertCount :(int)newKnownCertCount; - (NSData*)knownCertBytes:(int)knownCertIndex; - (long long)knownCertHandle:(int)knownCertIndex; - (void)setKnownCertHandle:(int)knownCertIndex :(long long)newKnownCertHandle;
Default Value
""
Remarks
Use this property to supply a list of additional certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when intermediary CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the class manually.
The purpose of the certificates to be added to this collection is roughly equivalent to that of the Intermediate Certification Authorities system store in Windows.
Do not add trust anchors or root certificates to this collection: add them to TrustedCertificates instead.
KnownCRLs Property (WebDAVClient Module)
Additional CRLs for chain validation.
Syntax
public var knownCRLs: Array<CRL> { get {...} }
@property (nonatomic,readwrite,assign,getter=knownCRLCount,setter=setKnownCRLCount:) int knownCRLCount; - (int)knownCRLCount; - (void)setKnownCRLCount :(int)newKnownCRLCount; - (NSData*)knownCRLBytes:(int)knownCRLIndex; - (long long)knownCRLHandle:(int)knownCRLIndex; - (void)setKnownCRLHandle:(int)knownCRLIndex :(long long)newKnownCRLHandle;
Default Value
""
Remarks
Use this property to supply additional CRLs that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated CRLs are stored separately from the signed message or document.
KnownOCSPs Property (WebDAVClient Module)
Additional OCSP responses for chain validation.
Syntax
public var knownOCSPs: Array<OCSPResponse> { get {...} }
@property (nonatomic,readwrite,assign,getter=knownOCSPCount,setter=setKnownOCSPCount:) int knownOCSPCount; - (int)knownOCSPCount; - (void)setKnownOCSPCount :(int)newKnownOCSPCount; - (NSData*)knownOCSPBytes:(int)knownOCSPIndex; - (long long)knownOCSPHandle:(int)knownOCSPIndex; - (void)setKnownOCSPHandle:(int)knownOCSPIndex :(long long)newKnownOCSPHandle;
Default Value
""
Remarks
Use this property to supply additional OCSP responses that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated OCSP responses are stored separately from the signed message or document.
LockDepth Property (WebDAVClient Module)
Specifies the depth of the current lock.
Syntax
public var lockDepth: WebdavclientLockDepths { get {...} }
public enum WebdavclientLockDepths: Int32 { case cwddZero = 0 case cwddOne = 1 case cwddInfinity = 2 }
@property (nonatomic,readonly,assign,getter=lockDepth) int lockDepth; - (int)lockDepth;
Default Value
0
Remarks
Available options:
cwddZero | 0 | |
cwddOne | 1 | |
cwddInfinity | 2 |
This property is read-only.
LockScope Property (WebDAVClient Module)
Specifies the scope of the current lock.
Syntax
public var lockScope: WebdavclientLockScopes { get {...} }
public enum WebdavclientLockScopes: Int32 { case cwlsExclusive = 0 case cwlsShared = 1 }
@property (nonatomic,readonly,assign,getter=lockScope) int lockScope; - (int)lockScope;
Default Value
0
Remarks
Available options:
cwlsExclusive | 0 | |
cwlsShared | 1 |
This property is read-only.
LockTimeout Property (WebDAVClient Module)
Specifies the timeout of the current lock.
Syntax
public var lockTimeout: Int32 { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=lockTimeout,setter=setLockTimeout:) int lockTimeout; - (int)lockTimeout; - (void)setLockTimeout :(int)newLockTimeout;
Default Value
1000000
Remarks
Use this property to get the timeout figure for the current lock.
MoveToRename Property (WebDAVClient Module)
Enables move-to-rename operation handling mode.
Syntax
public var moveToRename: Bool { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=moveToRename,setter=setMoveToRename:) BOOL moveToRename; - (BOOL)moveToRename; - (void)setMoveToRename :(BOOL)newMoveToRename;
Default Value
True
Remarks
Use this property to enable or disable move-to-rename mode.
OverwriteOnCopy Property (WebDAVClient Module)
Enables overwriting on copy.
Syntax
public var overwriteOnCopy: Bool { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=overwriteOnCopy,setter=setOverwriteOnCopy:) BOOL overwriteOnCopy; - (BOOL)overwriteOnCopy; - (void)setOverwriteOnCopy :(BOOL)newOverwriteOnCopy;
Default Value
False
Remarks
Use this property to enforce overwriting of existing objects during copy operations.
OverwriteOnMove Property (WebDAVClient Module)
Enables overwriting on move.
Syntax
public var overwriteOnMove: Bool { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=overwriteOnMove,setter=setOverwriteOnMove:) BOOL overwriteOnMove; - (BOOL)overwriteOnMove; - (void)setOverwriteOnMove :(BOOL)newOverwriteOnMove;
Default Value
False
Remarks
Use this property to enforce overwriting of existing objects during move operations.
Password Property (WebDAVClient Module)
A password to authenticate to the server.
Syntax
public var password: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=password,setter=setPassword:) NSString* password; - (NSString*)password; - (void)setPassword :(NSString*)newPassword;
Default Value
""
Remarks
Use this property to specify the password to authenticate to the server.
Proxy Property (WebDAVClient Module)
The proxy server settings.
Syntax
public var proxy: ProxySettings { get {...} }
@property (nonatomic,readwrite,assign,getter=proxyAddress,setter=setProxyAddress:) NSString* proxyAddress; - (NSString*)proxyAddress; - (void)setProxyAddress :(NSString*)newProxyAddress; @property (nonatomic,readwrite,assign,getter=proxyAuthentication,setter=setProxyAuthentication:) int proxyAuthentication; - (int)proxyAuthentication; - (void)setProxyAuthentication :(int)newProxyAuthentication; @property (nonatomic,readwrite,assign,getter=proxyPassword,setter=setProxyPassword:) NSString* proxyPassword; - (NSString*)proxyPassword; - (void)setProxyPassword :(NSString*)newProxyPassword; @property (nonatomic,readwrite,assign,getter=proxyPort,setter=setProxyPort:) int proxyPort; - (int)proxyPort; - (void)setProxyPort :(int)newProxyPort; @property (nonatomic,readwrite,assign,getter=proxyProxyType,setter=setProxyProxyType:) int proxyProxyType; - (int)proxyProxyType; - (void)setProxyProxyType :(int)newProxyProxyType; @property (nonatomic,readwrite,assign,getter=proxyRequestHeaders,setter=setProxyRequestHeaders:) NSString* proxyRequestHeaders; - (NSString*)proxyRequestHeaders; - (void)setProxyRequestHeaders :(NSString*)newProxyRequestHeaders; @property (nonatomic,readwrite,assign,getter=proxyResponseBody,setter=setProxyResponseBody:) NSString* proxyResponseBody; - (NSString*)proxyResponseBody; - (void)setProxyResponseBody :(NSString*)newProxyResponseBody; @property (nonatomic,readwrite,assign,getter=proxyResponseHeaders,setter=setProxyResponseHeaders:) NSString* proxyResponseHeaders; - (NSString*)proxyResponseHeaders; - (void)setProxyResponseHeaders :(NSString*)newProxyResponseHeaders; @property (nonatomic,readwrite,assign,getter=proxyUseIPv6,setter=setProxyUseIPv6:) BOOL proxyUseIPv6; - (BOOL)proxyUseIPv6; - (void)setProxyUseIPv6 :(BOOL)newProxyUseIPv6; @property (nonatomic,readwrite,assign,getter=proxyUseProxy,setter=setProxyUseProxy:) BOOL proxyUseProxy; - (BOOL)proxyUseProxy; - (void)setProxyUseProxy :(BOOL)newProxyUseProxy; @property (nonatomic,readwrite,assign,getter=proxyUsername,setter=setProxyUsername:) NSString* proxyUsername; - (NSString*)proxyUsername; - (void)setProxyUsername :(NSString*)newProxyUsername;
Default Value
""
Remarks
Use this property to tune up the proxy server settings.
ResourceOwner Property (WebDAVClient Module)
Indicates the resource owner.
Syntax
public var resourceOwner: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=resourceOwner,setter=setResourceOwner:) NSString* resourceOwner; - (NSString*)resourceOwner; - (void)setResourceOwner :(NSString*)newResourceOwner;
Default Value
""
Remarks
This property indicates the resource owner.
ServerChain Property (WebDAVClient Module)
The TLS server's certificate chain.
Syntax
public var serverChain: Array<Certificate> { get {...} }
@property (nonatomic,readonly,assign,getter=serverCertCount) int serverCertCount; - (int)serverCertCount; - (NSData*)serverCertBytes:(int)serverCertIndex; - (NSData*)serverCertCAKeyID:(int)serverCertIndex; - (NSData*)serverCertFingerprint:(int)serverCertIndex; - (long long)serverCertHandle:(int)serverCertIndex; - (NSString*)serverCertIssuer:(int)serverCertIndex; - (NSString*)serverCertIssuerRDN:(int)serverCertIndex; - (NSString*)serverCertKeyAlgorithm:(int)serverCertIndex; - (int)serverCertKeyBits:(int)serverCertIndex; - (NSData*)serverCertKeyFingerprint:(int)serverCertIndex; - (int)serverCertKeyUsage:(int)serverCertIndex; - (NSData*)serverCertPublicKeyBytes:(int)serverCertIndex; - (BOOL)serverCertSelfSigned:(int)serverCertIndex; - (NSData*)serverCertSerialNumber:(int)serverCertIndex; - (NSString*)serverCertSigAlgorithm:(int)serverCertIndex; - (NSString*)serverCertSubject:(int)serverCertIndex; - (NSData*)serverCertSubjectKeyID:(int)serverCertIndex; - (NSString*)serverCertSubjectRDN:(int)serverCertIndex; - (NSString*)serverCertValidFrom:(int)serverCertIndex; - (NSString*)serverCertValidTo:(int)serverCertIndex;
Default Value
""
Remarks
Use this property to access the certificate chain sent by the TLS server. This property is ready to read when OnCertificateValidate event is fired by the client component.
SocketSettings Property (WebDAVClient Module)
Manages network connection settings.
Syntax
public var socketSettings: SocketSettings { get {...} }
@property (nonatomic,readwrite,assign,getter=socketDNSMode,setter=setSocketDNSMode:) int socketDNSMode; - (int)socketDNSMode; - (void)setSocketDNSMode :(int)newSocketDNSMode; @property (nonatomic,readwrite,assign,getter=socketDNSPort,setter=setSocketDNSPort:) int socketDNSPort; - (int)socketDNSPort; - (void)setSocketDNSPort :(int)newSocketDNSPort; @property (nonatomic,readwrite,assign,getter=socketDNSQueryTimeout,setter=setSocketDNSQueryTimeout:) int socketDNSQueryTimeout; - (int)socketDNSQueryTimeout; - (void)setSocketDNSQueryTimeout :(int)newSocketDNSQueryTimeout; @property (nonatomic,readwrite,assign,getter=socketDNSServers,setter=setSocketDNSServers:) NSString* socketDNSServers; - (NSString*)socketDNSServers; - (void)setSocketDNSServers :(NSString*)newSocketDNSServers; @property (nonatomic,readwrite,assign,getter=socketDNSTotalTimeout,setter=setSocketDNSTotalTimeout:) int socketDNSTotalTimeout; - (int)socketDNSTotalTimeout; - (void)setSocketDNSTotalTimeout :(int)newSocketDNSTotalTimeout; @property (nonatomic,readwrite,assign,getter=socketIncomingSpeedLimit,setter=setSocketIncomingSpeedLimit:) int socketIncomingSpeedLimit; - (int)socketIncomingSpeedLimit; - (void)setSocketIncomingSpeedLimit :(int)newSocketIncomingSpeedLimit; @property (nonatomic,readwrite,assign,getter=socketLocalAddress,setter=setSocketLocalAddress:) NSString* socketLocalAddress; - (NSString*)socketLocalAddress; - (void)setSocketLocalAddress :(NSString*)newSocketLocalAddress; @property (nonatomic,readwrite,assign,getter=socketLocalPort,setter=setSocketLocalPort:) int socketLocalPort; - (int)socketLocalPort; - (void)setSocketLocalPort :(int)newSocketLocalPort; @property (nonatomic,readwrite,assign,getter=socketOutgoingSpeedLimit,setter=setSocketOutgoingSpeedLimit:) int socketOutgoingSpeedLimit; - (int)socketOutgoingSpeedLimit; - (void)setSocketOutgoingSpeedLimit :(int)newSocketOutgoingSpeedLimit; @property (nonatomic,readwrite,assign,getter=socketTimeout,setter=setSocketTimeout:) int socketTimeout; - (int)socketTimeout; - (void)setSocketTimeout :(int)newSocketTimeout; @property (nonatomic,readwrite,assign,getter=socketUseIPv6,setter=setSocketUseIPv6:) BOOL socketUseIPv6; - (BOOL)socketUseIPv6; - (void)setSocketUseIPv6 :(BOOL)newSocketUseIPv6;
Default Value
""
Remarks
Use this property to tune up network connection parameters.
TLSSettings Property (WebDAVClient Module)
Manages TLS layer settings.
Syntax
public var tlsSettings: TLSSettings { get {...} }
@property (nonatomic,readwrite,assign,getter=TLSAutoValidateCertificates,setter=setTLSAutoValidateCertificates:) BOOL TLSAutoValidateCertificates; - (BOOL)TLSAutoValidateCertificates; - (void)setTLSAutoValidateCertificates :(BOOL)newTLSAutoValidateCertificates; @property (nonatomic,readwrite,assign,getter=TLSBaseConfiguration,setter=setTLSBaseConfiguration:) int TLSBaseConfiguration; - (int)TLSBaseConfiguration; - (void)setTLSBaseConfiguration :(int)newTLSBaseConfiguration; @property (nonatomic,readwrite,assign,getter=TLSCiphersuites,setter=setTLSCiphersuites:) NSString* TLSCiphersuites; - (NSString*)TLSCiphersuites; - (void)setTLSCiphersuites :(NSString*)newTLSCiphersuites; @property (nonatomic,readwrite,assign,getter=TLSECCurves,setter=setTLSECCurves:) NSString* TLSECCurves; - (NSString*)TLSECCurves; - (void)setTLSECCurves :(NSString*)newTLSECCurves; @property (nonatomic,readwrite,assign,getter=TLSExtensions,setter=setTLSExtensions:) NSString* TLSExtensions; - (NSString*)TLSExtensions; - (void)setTLSExtensions :(NSString*)newTLSExtensions; @property (nonatomic,readwrite,assign,getter=TLSForceResumeIfDestinationChanges,setter=setTLSForceResumeIfDestinationChanges:) BOOL TLSForceResumeIfDestinationChanges; - (BOOL)TLSForceResumeIfDestinationChanges; - (void)setTLSForceResumeIfDestinationChanges :(BOOL)newTLSForceResumeIfDestinationChanges; @property (nonatomic,readwrite,assign,getter=TLSPreSharedIdentity,setter=setTLSPreSharedIdentity:) NSString* TLSPreSharedIdentity; - (NSString*)TLSPreSharedIdentity; - (void)setTLSPreSharedIdentity :(NSString*)newTLSPreSharedIdentity; @property (nonatomic,readwrite,assign,getter=TLSPreSharedKey,setter=setTLSPreSharedKey:) NSString* TLSPreSharedKey; - (NSString*)TLSPreSharedKey; - (void)setTLSPreSharedKey :(NSString*)newTLSPreSharedKey; @property (nonatomic,readwrite,assign,getter=TLSPreSharedKeyCiphersuite,setter=setTLSPreSharedKeyCiphersuite:) NSString* TLSPreSharedKeyCiphersuite; - (NSString*)TLSPreSharedKeyCiphersuite; - (void)setTLSPreSharedKeyCiphersuite :(NSString*)newTLSPreSharedKeyCiphersuite; @property (nonatomic,readwrite,assign,getter=TLSRenegotiationAttackPreventionMode,setter=setTLSRenegotiationAttackPreventionMode:) int TLSRenegotiationAttackPreventionMode; - (int)TLSRenegotiationAttackPreventionMode; - (void)setTLSRenegotiationAttackPreventionMode :(int)newTLSRenegotiationAttackPreventionMode; @property (nonatomic,readwrite,assign,getter=TLSRevocationCheck,setter=setTLSRevocationCheck:) int TLSRevocationCheck; - (int)TLSRevocationCheck; - (void)setTLSRevocationCheck :(int)newTLSRevocationCheck; @property (nonatomic,readwrite,assign,getter=TLSSSLOptions,setter=setTLSSSLOptions:) int TLSSSLOptions; - (int)TLSSSLOptions; - (void)setTLSSSLOptions :(int)newTLSSSLOptions; @property (nonatomic,readwrite,assign,getter=TLSTLSMode,setter=setTLSTLSMode:) int TLSTLSMode; - (int)TLSTLSMode; - (void)setTLSTLSMode :(int)newTLSTLSMode; @property (nonatomic,readwrite,assign,getter=TLSUseExtendedMasterSecret,setter=setTLSUseExtendedMasterSecret:) BOOL TLSUseExtendedMasterSecret; - (BOOL)TLSUseExtendedMasterSecret; - (void)setTLSUseExtendedMasterSecret :(BOOL)newTLSUseExtendedMasterSecret; @property (nonatomic,readwrite,assign,getter=TLSUseSessionResumption,setter=setTLSUseSessionResumption:) BOOL TLSUseSessionResumption; - (BOOL)TLSUseSessionResumption; - (void)setTLSUseSessionResumption :(BOOL)newTLSUseSessionResumption; @property (nonatomic,readwrite,assign,getter=TLSVersions,setter=setTLSVersions:) int TLSVersions; - (int)TLSVersions; - (void)setTLSVersions :(int)newTLSVersions;
Default Value
""
Remarks
Use this property to tune up the TLS layer parameters.
TrustedCertificates Property (WebDAVClient Module)
A list of trusted certificates for chain validation.
Syntax
public var trustedCertificates: Array<Certificate> { get {...} }
@property (nonatomic,readwrite,assign,getter=trustedCertCount,setter=setTrustedCertCount:) int trustedCertCount; - (int)trustedCertCount; - (void)setTrustedCertCount :(int)newTrustedCertCount; - (NSData*)trustedCertBytes:(int)trustedCertIndex; - (long long)trustedCertHandle:(int)trustedCertIndex; - (void)setTrustedCertHandle:(int)trustedCertIndex :(long long)newTrustedCertHandle;
Default Value
""
Remarks
Use this property to supply a list of trusted certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when root CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.
The purpose of this certificate collection is largely the same as that of the Windows Trusted Root Certification Authorities system store.
Use this property with extreme care as it directly affects chain verifiability; a wrong certificate added to the trusted list may result in bad chains being accepted, and forfeited signatures being recognized as genuine. Only add certificates that originate from the parties that you know and trust.
Username Property (WebDAVClient Module)
A username to authenticate to the server.
Syntax
public var username: String { get {...} set {...} }
@property (nonatomic,readwrite,assign,getter=username,setter=setUsername:) NSString* username; - (NSString*)username; - (void)setUsername :(NSString*)newUsername;
Default Value
""
Remarks
Use this property to specify the username to authenticate to the server.
Config Method (WebDAVClient Module)
Sets or retrieves a configuration setting.
Syntax
- (NSString*)config:(NSString*)configurationString;
Remarks
Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
Connect Method (WebDAVClient Module)
Establishes connection to a WebDAV server.
Syntax
Remarks
Call this method to set up a connection to a WebDAV server at URL.
Copy Method (WebDAVClient Module)
Copies a remote file.
Syntax
- (void)copy:(NSString*)sourceURL :(NSString*)destURL;
Remarks
Use this method to copy a remote file from SourceURL to DestURL.
CustomRequest Method (WebDAVClient Module)
Performs custom WebDAV request.
Syntax
- (NSString*)customRequest:(NSString*)URL :(NSString*)method :(NSString*)properties;
Remarks
Use the Method to choose between PROPFIND or PROPPATCH method and Properties to list properties.
For PROPFIND request this method returns an uninterpreted string of the listing results.
DeleteDir Method (WebDAVClient Module)
Removes a remote directory.
Syntax
Remarks
Use this method to delete a directory from the WebDAV server. Use URL to specify the directory to delete.
DeleteFile Method (WebDAVClient Module)
Deletes a remote file.
Syntax
Remarks
Use this method to delete a file from a WebDAV server.
DirExists Method (WebDAVClient Module)
Checks if a directory exists on the server.
Syntax
Remarks
Use this method to check if the URL exists and is accessible.
Disconnect Method (WebDAVClient Module)
Disconnects from the server.
Syntax
public func disconnect() throws -> Void
- (void)disconnect;
Remarks
Call this method to close an active WebDAV connection.
DoAction Method (WebDAVClient Module)
Performs an additional action.
Syntax
- (NSString*)doAction:(NSString*)actionID :(NSString*)actionParams;
Remarks
DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.
The unique identifier (case insensitive) of the action is provided in the ActionID parameter.
ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....
DownloadFile Method (WebDAVClient Module)
Downloads a file from the server.
Syntax
- (void)downloadFile:(NSString*)remoteFile :(NSString*)localFile;
Remarks
Use this method to download the RemoteFile or its part from the server and save it in LocalFile.
FileExists Method (WebDAVClient Module)
Checks if a file exists on the server.
Syntax
Remarks
Use this method to check if the object addressed by URL exists on the server.
GetFileSize Method (WebDAVClient Module)
Requests the size of a remote file.
Syntax
Remarks
Use this method to request a file size from the server.
ListDir Method (WebDAVClient Module)
Lists the remote directory contents.
Syntax
- (NSString*)listDir:(NSString*)URL :(BOOL)includeFiles :(BOOL)includeDirectories;
Remarks
Use the IncludeFiles and IncludeDirectories parameters to specify the types of entries you would like to list.
This method returns an uninterpreted string of the listing results. Besides, it fires the ListEntry event for each entry received, populating the entry in CurrentListEntry before calling the event.
ListDirRecursive Method (WebDAVClient Module)
Lists the remote directory contents, recursively.
Syntax
public func listDirRecursive(url: String, includeFiles: Bool, includeDirectories: Bool) throws -> String
- (NSString*)listDirRecursive:(NSString*)URL :(BOOL)includeFiles :(BOOL)includeDirectories;
Remarks
Use the IncludeFiles and IncludeDirectories parameters to specify the types of entries you would like to list.
This method returns an uninterpreted string of the listing results. Besides, it fires the ListEntry event for each entry received, populating the entry in CurrentListEntry before calling the event.
Lock Method (WebDAVClient Module)
Sets up a lock on a URL.
Syntax
Remarks
Locks a WebDAV object.
MakeDir Method (WebDAVClient Module)
Creates a directory on the server.
Syntax
Remarks
This method creates a directory on the WebDAV server.
MoveFile Method (WebDAVClient Module)
Moves an object.
Syntax
- (void)moveFile:(NSString*)sourceURL :(NSString*)destURL;
Remarks
Use this method to move SourceURL to DestURL.
RefreshLock Method (WebDAVClient Module)
Refreshes an object lock.
Syntax
- (void)refreshLock:(NSString*)URL :(NSString*)lockStr;
Remarks
This method updates the existing lock on a WebDAV object.
Rename Method (WebDAVClient Module)
Renames an object.
Syntax
- (void)rename:(NSString*)sourceURL :(NSString*)newName;
Remarks
Use this method to rename SourceURL to NewName.
Unlock Method (WebDAVClient Module)
Removes a lock from a URL.
Syntax
- (void)unlock:(NSString*)URL :(NSString*)lockStr;
Remarks
Unlocks a WebDAV object.
UploadFile Method (WebDAVClient Module)
Uploads a file to the server.
Syntax
- (void)uploadFile:(NSString*)localFile :(NSString*)remoteFile;
Remarks
Use this method to upload LocalFile or its part to RemoteFile on the WebDAV server.
Error Event (WebDAVClient Module)
Information about connection and request errors.
Syntax
- (void)onError:(int)errorCode :(NSString*)description;
Remarks
The event is fired to report exceptional conditions during the communication.
ErrorCode contains an error code and Description contains a textual description of the error.
ExternalSign Event (WebDAVClient Module)
Handles remote or external signing initiated by the SignExternal method or other source.
Syntax
func onExternalSign(operationId: String, hashAlgorithm: String, pars: String, data: String, signedData: inout String)
- (void)onExternalSign:(NSString*)operationId :(NSString*)hashAlgorithm :(NSString*)pars :(NSString*)data :(NSString**)signedData;
Remarks
Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.
The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.
OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.
The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.
A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16
A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following:
signer.OnExternalSign += (s, e) =>
{
var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable);
var key = (RSACryptoServiceProvider)cert.PrivateKey;
var dataToSign = e.Data.FromBase16String();
var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1");
e.SignedData = signedData.ToBase16String();
};
ListEntry Event (WebDAVClient Module)
Passes the next directory listing entry to the application.
Syntax
func onListEntry(filename: String)
- (void)onListEntry:(NSString*)filename;
Remarks
The class fires this event repeatedly to pass the whole list of directory entries received in response to a ListDir call to the application. For each entry, FileName contains the received directory entry name, and CurrentListEntry populates all the details.
Notification Event (WebDAVClient Module)
This event notifies the application about an underlying control flow event.
Syntax
- (void)onNotification:(NSString*)eventID :(NSString*)eventParam;
Remarks
The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.
The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.
OperationError Event (WebDAVClient Module)
Reports a protocol error.
Syntax
- (void)onOperationError:(NSString*)URL :(NSString*)status :(NSString*)error :(NSString*)description;
Remarks
This event is fired to report a WebDAV protocol error that happened during the data exchange. This is different from Error which reports more general errors out of the scope of WebDAV protocol.
Use ErrorCode to get the error code, and Description for a corresponding textual comment.
Progress Event (WebDAVClient Module)
Fires periodically during the data transfer.
Syntax
func onProgress(total: Int64, current: Int64, cancel: inout Bool)
- (void)onProgress:(long long)total :(long long)current :(int*)cancel;
Remarks
Use this event to check the progress of an upload or download operation. Total indicates the total number of bytes to be transferred; Current specifies how much data has been transferred so far, and Cancel gives you a chance to cancel the operation.
TLSCertNeeded Event (WebDAVClient Module)
Fires when a remote TLS party requests a client certificate.
Syntax
- (void)onTLSCertNeeded:(NSString*)host :(NSString*)CANames;
Remarks
This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.
Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.
This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.
TLSCertValidate Event (WebDAVClient Module)
This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
Syntax
func onTLSCertValidate(serverHost: String, serverIP: String, accept: inout Bool)
- (void)onTLSCertValidate:(NSString*)serverHost :(NSString*)serverIP :(int*)accept;
Remarks
This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, classes may contact a number of TLS endpoints during their work, depending on their configuration.
Accept is assigned in accordance with the outcome of the internal validation check performed by the class, and can be adjusted if needed.
TLSEstablished Event (WebDAVClient Module)
Fires when a TLS handshake with Host successfully completes.
Syntax
func onTLSEstablished(host: String, version: String, ciphersuite: String, connectionId: Data, abort: inout Bool)
- (void)onTLSEstablished:(NSString*)host :(NSString*)version :(NSString*)ciphersuite :(NSData*)connectionId :(int*)abort;
Remarks
The class uses this event to notify the application about a successful completion of a TLS handshake.
The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.
TLSHandshake Event (WebDAVClient Module)
Fires when a new TLS handshake is initiated, before the handshake commences.
Syntax
func onTLSHandshake(host: String, abort: inout Bool)
- (void)onTLSHandshake:(NSString*)host :(int*)abort;
Remarks
The class uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.
TLSPSK Event (WebDAVClient Module)
Notifies the application about the PSK key exchange.
Syntax
Remarks
The class fires this event to notify the application about the beginning of TLS-PSK key exchange with Host. The Hint parameter may be used by the server to identify the key or service to use. Use the PreSharedKey field of TLSSettings to provide the pre-shared key to the component.
TLSShutdown Event (WebDAVClient Module)
Reports the graceful closure of a TLS connection.
Syntax
func onTLSShutdown(host: String)
- (void)onTLSShutdown:(NSString*)host;
Remarks
This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.
Certificate Type
Provides details of an individual X.509 certificate.
Remarks
This type provides access to X.509 certificate details.
Fields
bytes
Data (read-only)
Default Value: ""
Returns the raw certificate data in DER format.
ca
Bool
Default Value: False
Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).
caKeyID
Data (read-only)
Default Value: ""
A unique identifier (fingerprint) of the CA certificate's private key.
Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.
crlDistributionPoints
String
Default Value: ""
Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.
curve
String
Default Value: ""
Specifies the elliptic curve of the EC public key.
SB_EC_SECP112R1 | SECP112R1 | |
SB_EC_SECP112R2 | SECP112R2 | |
SB_EC_SECP128R1 | SECP128R1 | |
SB_EC_SECP128R2 | SECP128R2 | |
SB_EC_SECP160K1 | SECP160K1 | |
SB_EC_SECP160R1 | SECP160R1 | |
SB_EC_SECP160R2 | SECP160R2 | |
SB_EC_SECP192K1 | SECP192K1 | |
SB_EC_SECP192R1 | SECP192R1 | |
SB_EC_SECP224K1 | SECP224K1 | |
SB_EC_SECP224R1 | SECP224R1 | |
SB_EC_SECP256K1 | SECP256K1 | |
SB_EC_SECP256R1 | SECP256R1 | |
SB_EC_SECP384R1 | SECP384R1 | |
SB_EC_SECP521R1 | SECP521R1 | |
SB_EC_SECT113R1 | SECT113R1 | |
SB_EC_SECT113R2 | SECT113R2 | |
SB_EC_SECT131R1 | SECT131R1 | |
SB_EC_SECT131R2 | SECT131R2 | |
SB_EC_SECT163K1 | SECT163K1 | |
SB_EC_SECT163R1 | SECT163R1 | |
SB_EC_SECT163R2 | SECT163R2 | |
SB_EC_SECT193R1 | SECT193R1 | |
SB_EC_SECT193R2 | SECT193R2 | |
SB_EC_SECT233K1 | SECT233K1 | |
SB_EC_SECT233R1 | SECT233R1 | |
SB_EC_SECT239K1 | SECT239K1 | |
SB_EC_SECT283K1 | SECT283K1 | |
SB_EC_SECT283R1 | SECT283R1 | |
SB_EC_SECT409K1 | SECT409K1 | |
SB_EC_SECT409R1 | SECT409R1 | |
SB_EC_SECT571K1 | SECT571K1 | |
SB_EC_SECT571R1 | SECT571R1 | |
SB_EC_PRIME192V1 | PRIME192V1 | |
SB_EC_PRIME192V2 | PRIME192V2 | |
SB_EC_PRIME192V3 | PRIME192V3 | |
SB_EC_PRIME239V1 | PRIME239V1 | |
SB_EC_PRIME239V2 | PRIME239V2 | |
SB_EC_PRIME239V3 | PRIME239V3 | |
SB_EC_PRIME256V1 | PRIME256V1 | |
SB_EC_C2PNB163V1 | C2PNB163V1 | |
SB_EC_C2PNB163V2 | C2PNB163V2 | |
SB_EC_C2PNB163V3 | C2PNB163V3 | |
SB_EC_C2PNB176W1 | C2PNB176W1 | |
SB_EC_C2TNB191V1 | C2TNB191V1 | |
SB_EC_C2TNB191V2 | C2TNB191V2 | |
SB_EC_C2TNB191V3 | C2TNB191V3 | |
SB_EC_C2ONB191V4 | C2ONB191V4 | |
SB_EC_C2ONB191V5 | C2ONB191V5 | |
SB_EC_C2PNB208W1 | C2PNB208W1 | |
SB_EC_C2TNB239V1 | C2TNB239V1 | |
SB_EC_C2TNB239V2 | C2TNB239V2 | |
SB_EC_C2TNB239V3 | C2TNB239V3 | |
SB_EC_C2ONB239V4 | C2ONB239V4 | |
SB_EC_C2ONB239V5 | C2ONB239V5 | |
SB_EC_C2PNB272W1 | C2PNB272W1 | |
SB_EC_C2PNB304W1 | C2PNB304W1 | |
SB_EC_C2TNB359V1 | C2TNB359V1 | |
SB_EC_C2PNB368W1 | C2PNB368W1 | |
SB_EC_C2TNB431R1 | C2TNB431R1 | |
SB_EC_NISTP192 | NISTP192 | |
SB_EC_NISTP224 | NISTP224 | |
SB_EC_NISTP256 | NISTP256 | |
SB_EC_NISTP384 | NISTP384 | |
SB_EC_NISTP521 | NISTP521 | |
SB_EC_NISTB163 | NISTB163 | |
SB_EC_NISTB233 | NISTB233 | |
SB_EC_NISTB283 | NISTB283 | |
SB_EC_NISTB409 | NISTB409 | |
SB_EC_NISTB571 | NISTB571 | |
SB_EC_NISTK163 | NISTK163 | |
SB_EC_NISTK233 | NISTK233 | |
SB_EC_NISTK283 | NISTK283 | |
SB_EC_NISTK409 | NISTK409 | |
SB_EC_NISTK571 | NISTK571 | |
SB_EC_GOSTCPTEST | GOSTCPTEST | |
SB_EC_GOSTCPA | GOSTCPA | |
SB_EC_GOSTCPB | GOSTCPB | |
SB_EC_GOSTCPC | GOSTCPC | |
SB_EC_GOSTCPXCHA | GOSTCPXCHA | |
SB_EC_GOSTCPXCHB | GOSTCPXCHB | |
SB_EC_BRAINPOOLP160R1 | BRAINPOOLP160R1 | |
SB_EC_BRAINPOOLP160T1 | BRAINPOOLP160T1 | |
SB_EC_BRAINPOOLP192R1 | BRAINPOOLP192R1 | |
SB_EC_BRAINPOOLP192T1 | BRAINPOOLP192T1 | |
SB_EC_BRAINPOOLP224R1 | BRAINPOOLP224R1 | |
SB_EC_BRAINPOOLP224T1 | BRAINPOOLP224T1 | |
SB_EC_BRAINPOOLP256R1 | BRAINPOOLP256R1 | |
SB_EC_BRAINPOOLP256T1 | BRAINPOOLP256T1 | |
SB_EC_BRAINPOOLP320R1 | BRAINPOOLP320R1 | |
SB_EC_BRAINPOOLP320T1 | BRAINPOOLP320T1 | |
SB_EC_BRAINPOOLP384R1 | BRAINPOOLP384R1 | |
SB_EC_BRAINPOOLP384T1 | BRAINPOOLP384T1 | |
SB_EC_BRAINPOOLP512R1 | BRAINPOOLP512R1 | |
SB_EC_BRAINPOOLP512T1 | BRAINPOOLP512T1 | |
SB_EC_CURVE25519 | CURVE25519 | |
SB_EC_CURVE448 | CURVE448 |
fingerprint
Data (read-only)
Default Value: ""
Contains the fingerprint (a hash imprint) of this certificate.
friendlyName
String (read-only)
Default Value: ""
Contains an associated alias (friendly name) of the certificate.
handle
Int64
Default Value: 0
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
hashAlgorithm
String
Default Value: ""
Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_MD2 | MD2 | |
SB_HASH_ALGORITHM_MD4 | MD4 | |
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_CRC32 | CRC32 | |
SB_HASH_ALGORITHM_SSL3 | SSL3 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_POLY1305 | POLY1305 | |
SB_HASH_ALGORITHM_SHA3_224 | SHA3_224 | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | |
SB_HASH_ALGORITHM_BLAKE2S_128 | BLAKE2S_128 | |
SB_HASH_ALGORITHM_BLAKE2S_160 | BLAKE2S_160 | |
SB_HASH_ALGORITHM_BLAKE2S_224 | BLAKE2S_224 | |
SB_HASH_ALGORITHM_BLAKE2S_256 | BLAKE2S_256 | |
SB_HASH_ALGORITHM_BLAKE2B_160 | BLAKE2B_160 | |
SB_HASH_ALGORITHM_BLAKE2B_256 | BLAKE2B_256 | |
SB_HASH_ALGORITHM_BLAKE2B_384 | BLAKE2B_384 | |
SB_HASH_ALGORITHM_BLAKE2B_512 | BLAKE2B_512 | |
SB_HASH_ALGORITHM_SHAKE_128 | SHAKE_128 | |
SB_HASH_ALGORITHM_SHAKE_256 | SHAKE_256 | |
SB_HASH_ALGORITHM_SHAKE_128_LEN | SHAKE_128_LEN | |
SB_HASH_ALGORITHM_SHAKE_256_LEN | SHAKE_256_LEN |
issuer
String (read-only)
Default Value: ""
The common name of the certificate issuer (CA), typically a company name.
issuerRDN
String
Default Value: ""
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
keyAlgorithm
String
Default Value: "0"
Specifies the public key algorithm of this certificate.
SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION | rsaEncryption | |
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION | md2withRSAEncryption | |
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION | md5withRSAEncryption | |
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION | sha1withRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA | id-dsa | |
SB_CERT_ALGORITHM_ID_DSA_SHA1 | id-dsa-with-sha1 | |
SB_CERT_ALGORITHM_DH_PUBLIC | dhpublicnumber | |
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION | sha224WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION | sha256WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION | sha384WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION | sha512WithRSAEncryption | |
SB_CERT_ALGORITHM_ID_RSAPSS | id-RSASSA-PSS | |
SB_CERT_ALGORITHM_ID_RSAOAEP | id-RSAES-OAEP | |
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160 | ripemd160withRSA | |
SB_CERT_ALGORITHM_ID_ELGAMAL | elGamal | |
SB_CERT_ALGORITHM_SHA1_ECDSA | ecdsa-with-SHA1 | |
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA | ecdsa-recommended | |
SB_CERT_ALGORITHM_SHA224_ECDSA | ecdsa-with-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA | ecdsa-with-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA | ecdsa-with-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA | ecdsa-with-SHA512 | |
SB_CERT_ALGORITHM_EC | id-ecPublicKey | |
SB_CERT_ALGORITHM_SPECIFIED_ECDSA | ecdsa-specified | |
SB_CERT_ALGORITHM_GOST_R3410_1994 | id-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3410_2001 | id-GostR3410-2001 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994 | id-GostR3411-94-with-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001 | id-GostR3411-94-with-GostR3410-2001 | |
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN | ecdsa-plain-SHA1 | |
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN | ecdsa-plain-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN | ecdsa-plain-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN | ecdsa-plain-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN | ecdsa-plain-SHA512 | |
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN | ecdsa-plain-RIPEMD160 | |
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION | whirlpoolWithRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA_SHA224 | id-dsa-with-sha224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA256 | id-dsa-with-sha256 | |
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA | id-ecdsa-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA | id-ecdsa-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA | id-ecdsa-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA | id-ecdsa-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-512 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_224 | id-dsa-with-sha3-224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_256 | id-dsa-with-sha3-256 | |
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA | id-ecdsa-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA | id-ecdsa-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA | id-ecdsa-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA | id-ecdsa-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA | id-ecdsa-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA | id-ecdsa-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA | id-ecdsa-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA | id-ecdsa-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b512 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224 | id-dsa-with-blake2s224 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256 | id-dsa-with-blake2s256 | |
SB_CERT_ALGORITHM_EDDSA_ED25519 | id-Ed25519 | |
SB_CERT_ALGORITHM_EDDSA_ED448 | id-Ed448 | |
SB_CERT_ALGORITHM_EDDSA_ED25519_PH | id-Ed25519ph | |
SB_CERT_ALGORITHM_EDDSA_ED448_PH | id-Ed448ph | |
SB_CERT_ALGORITHM_EDDSA | id-EdDSA | |
SB_CERT_ALGORITHM_EDDSA_SIGNATURE | id-EdDSA-sig |
keyBits
Int32 (read-only)
Default Value: 0
Returns the length of the public key.
keyFingerprint
Data (read-only)
Default Value: ""
Returns a fingerprint of the public key contained in the certificate.
keyUsage
Int32
Default Value: 0
Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
This value is a bit mask of the following values:
ckuUnknown | 0x00000 | Unknown key usage |
ckuDigitalSignature | 0x00001 | Digital signature |
ckuNonRepudiation | 0x00002 | Non-repudiation |
ckuKeyEncipherment | 0x00004 | Key encipherment |
ckuDataEncipherment | 0x00008 | Data encipherment |
ckuKeyAgreement | 0x00010 | Key agreement |
ckuKeyCertSign | 0x00020 | Certificate signing |
ckuCRLSign | 0x00040 | Revocation signing |
ckuEncipherOnly | 0x00080 | Encipher only |
ckuDecipherOnly | 0x00100 | Decipher only |
ckuServerAuthentication | 0x00200 | Server authentication |
ckuClientAuthentication | 0x00400 | Client authentication |
ckuCodeSigning | 0x00800 | Code signing |
ckuEmailProtection | 0x01000 | Email protection |
ckuTimeStamping | 0x02000 | Timestamping |
ckuOCSPSigning | 0x04000 | OCSP signing |
ckuSmartCardLogon | 0x08000 | Smartcard logon |
ckuKeyPurposeClientAuth | 0x10000 | Kerberos - client authentication |
ckuKeyPurposeKDC | 0x20000 | Kerberos - KDC |
keyValid
Bool (read-only)
Default Value: False
Returns True if the certificate's key is cryptographically valid, and False otherwise.
ocspLocations
String
Default Value: ""
Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.
ocspNoCheck
Bool
Default Value: False
Accessor to the value of the certificate's ocsp-no-check extension.
origin
Int32 (read-only)
Default Value: 0
Returns the origin of this certificate.
policyIDs
String
Default Value: ""
Contains identifiers (OIDs) of the applicable certificate policies.
The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.
privateKeyBytes
Data (read-only)
Default Value: ""
Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.
privateKeyExists
Bool (read-only)
Default Value: False
Indicates whether the certificate has an associated private key.
privateKeyExtractable
Bool (read-only)
Default Value: False
Indicates whether the private key is extractable.
publicKeyBytes
Data (read-only)
Default Value: ""
Contains the certificate's public key in DER format.
qualifiedStatements
QualifiedStatementsTypes
Default Value: 0
Returns the qualified status of the certificate.
selfSigned
Bool (read-only)
Default Value: False
Indicates whether the certificate is self-signed (root) or signed by an external CA.
serialNumber
Data
Default Value: ""
Returns the certificate's serial number.
sigAlgorithm
String (read-only)
Default Value: ""
Indicates the algorithm that was used by the CA to sign this certificate.
subject
String (read-only)
Default Value: ""
The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
subjectAlternativeName
String
Default Value: ""
Returns or sets the value of the Subject Alternative Name extension of the certificate.
subjectKeyID
Data
Default Value: ""
Contains a unique identifier (fingerprint) of the certificate's private key.
Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.
subjectRDN
String
Default Value: ""
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
validFrom
String
Default Value: ""
The time point at which the certificate becomes valid, in UTC.
validTo
String
Default Value: ""
The time point at which the certificate expires, in UTC.
Constructors
public init(stream: )
Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.
public init()
Creates a new object with default field values.
ConnectionInfo Type
Contains information about a network connection.
Remarks
Use this property to check various details of the network connection. These include the total amounts of data transferred, the availability of TLS, and its parameters.
Fields
aeadCipher
Bool (read-only)
Default Value: False
Indicates whether the encryption algorithm used is an AEAD cipher.
chainValidationDetails
Int32 (read-only)
Default Value: 0
The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.
Returns a bit mask of the following options:
cvrBadData | 0x0001 | One or more certificates in the validation path are malformed |
cvrRevoked | 0x0002 | One or more certificates are revoked |
cvrNotYetValid | 0x0004 | One or more certificates are not yet valid |
cvrExpired | 0x0008 | One or more certificates are expired |
cvrInvalidSignature | 0x0010 | A certificate contains a non-valid digital signature |
cvrUnknownCA | 0x0020 | A CA certificate for one or more certificates has not been found (chain incomplete) |
cvrCAUnauthorized | 0x0040 | One of the CA certificates are not authorized to act as CA |
cvrCRLNotVerified | 0x0080 | One or more CRLs could not be verified |
cvrOCSPNotVerified | 0x0100 | One or more OCSP responses could not be verified |
cvrIdentityMismatch | 0x0200 | The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate |
cvrNoKeyUsage | 0x0400 | A mandatory key usage is not enabled in one of the chain certificates |
cvrBlocked | 0x0800 | One or more certificates are blocked |
cvrFailure | 0x1000 | General validation failure |
cvrChainLoop | 0x2000 | Chain loop: one of the CA certificates recursively signs itself |
cvrWeakAlgorithm | 0x4000 | A weak algorithm is used in one of certificates or revocation elements |
cvrUserEnforced | 0x8000 | The chain was considered invalid following intervention from a user code |
chainValidationResult
ChainValidities (read-only)
Default Value: 0
The outcome of a certificate chain validation routine.
Available options:
cvtValid | 0 | The chain is valid |
cvtValidButUntrusted | 1 | The chain is valid, but the root certificate is not trusted |
cvtInvalid | 2 | The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature) |
cvtCantBeEstablished | 3 | The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses) |
Use the ValidationLog property to access the detailed validation log.
ciphersuite
String (read-only)
Default Value: ""
The cipher suite employed by this connection.
For TLS connections, this property returns the ciphersuite that was/is employed by the connection.
clientAuthenticated
Bool (read-only)
Default Value: False
Specifies whether client authentication was performed during this connection.
clientAuthRequested
Bool (read-only)
Default Value: False
Specifies whether client authentication was requested during this connection.
connectionEstablished
Bool (read-only)
Default Value: False
Indicates whether the connection has been established fully.
connectionID
Data (read-only)
Default Value: ""
The unique identifier assigned to this connection.
digestAlgorithm
String (read-only)
Default Value: ""
The digest algorithm used in a TLS-enabled connection.
encryptionAlgorithm
String (read-only)
Default Value: ""
The symmetric encryption algorithm used in a TLS-enabled connection.
exportable
Bool (read-only)
Default Value: False
Indicates whether a TLS connection uses a reduced-strength exportable cipher.
keyExchangeAlgorithm
String (read-only)
Default Value: ""
The key exchange algorithm used in a TLS-enabled connection.
keyExchangeKeyBits
Int32 (read-only)
Default Value: 0
The length of the key exchange key of a TLS-enabled connection.
namedECCurve
String (read-only)
Default Value: ""
The elliptic curve used in this connection.
pfsCipher
Bool (read-only)
Default Value: False
Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).
preSharedIdentityHint
String (read-only)
Default Value: ""
A hint professed by the server to help the client select the PSK identity to use.
publicKeyBits
Int32 (read-only)
Default Value: 0
The length of the public key.
resumedSession
Bool (read-only)
Default Value: False
Indicates whether a TLS-enabled connection was spawned from another TLS connection
secureConnection
Bool (read-only)
Default Value: False
Indicates whether TLS or SSL is enabled for this connection.
serverAuthenticated
Bool (read-only)
Default Value: False
Indicates whether server authentication was performed during a TLS-enabled connection.
signatureAlgorithm
String (read-only)
Default Value: ""
The signature algorithm used in a TLS handshake.
symmetricBlockSize
Int32 (read-only)
Default Value: 0
The block size of the symmetric algorithm used.
symmetricKeyBits
Int32 (read-only)
Default Value: 0
The key length of the symmetric algorithm used.
totalBytesReceived
Int64 (read-only)
Default Value: 0
The total number of bytes received over this connection.
totalBytesSent
Int64 (read-only)
Default Value: 0
The total number of bytes sent over this connection.
validationLog
String (read-only)
Default Value: ""
Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.
version
String (read-only)
Default Value: ""
Indicates the version of SSL/TLS protocol negotiated during this connection.
Constructors
public init()
Creates a new ConnectionInfo object.
CRL Type
Represents a Certificate Revocation List.
Remarks
CRLs store information about revoked certificates, i.e., certificates that have been identified as invalid by their issuing certificate authority (CA) for any number of reasons.
Each CRL object lists certificates from a single CA and identifies them by their serial numbers. A CA may or may not publish a CRL, may publish several CRLs, or may publish the same CRL in multiple locations.
Unlike OCSP responses, CRLs only list certificates that have been revoked. They do not list certificates that are still valid.
Fields
bytes
Data (read-only)
Default Value: ""
Returns the raw CRL data in DER format.
caKeyID
Data
Default Value: ""
A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.
entryCount
Int32 (read-only)
Default Value: 0
Returns the number of certificate status entries in the CRL.
handle
Int64
Default Value: 0
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
issuer
String (read-only)
Default Value: ""
The common name of the CRL issuer (CA), typically a company name.
issuerRDN
String (read-only)
Default Value: ""
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.
location
String (read-only)
Default Value: ""
The URL that the CRL was downloaded from.
nextUpdate
String (read-only)
Default Value: ""
The planned time and date of the next version of this CRL to be published.
sigAlgorithm
String (read-only)
Default Value: "0"
The public key algorithm that was used by the CA to sign this CRL.
tbs
Data (read-only)
Default Value: ""
The to-be-signed part of the CRL (the CRL without the signature part).
thisUpdate
String (read-only)
Default Value: ""
The date and time at which this version of the CRL was published.
Constructors
public init()
Creates an empty CRL object.
ExternalCrypto Type
Specifies the parameters of external cryptographic calls.
Remarks
External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.
Fields
asyncDocumentID
String
Default Value: ""
Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.
Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.
If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.
customParams
String
Default Value: ""
Custom parameters to be passed to the signing service (uninterpreted).
data
String
Default Value: ""
Additional data to be included in the async state and mirrored back by the requestor.
externalHashCalculation
Bool
Default Value: False
Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.
If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.
hashAlgorithm
String
Default Value: "SHA256"
Specifies the request's signature hash algorithm.
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_MD2 | MD2 | |
SB_HASH_ALGORITHM_MD4 | MD4 | |
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_CRC32 | CRC32 | |
SB_HASH_ALGORITHM_SSL3 | SSL3 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_POLY1305 | POLY1305 | |
SB_HASH_ALGORITHM_SHA3_224 | SHA3_224 | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | |
SB_HASH_ALGORITHM_BLAKE2S_128 | BLAKE2S_128 | |
SB_HASH_ALGORITHM_BLAKE2S_160 | BLAKE2S_160 | |
SB_HASH_ALGORITHM_BLAKE2S_224 | BLAKE2S_224 | |
SB_HASH_ALGORITHM_BLAKE2S_256 | BLAKE2S_256 | |
SB_HASH_ALGORITHM_BLAKE2B_160 | BLAKE2B_160 | |
SB_HASH_ALGORITHM_BLAKE2B_256 | BLAKE2B_256 | |
SB_HASH_ALGORITHM_BLAKE2B_384 | BLAKE2B_384 | |
SB_HASH_ALGORITHM_BLAKE2B_512 | BLAKE2B_512 | |
SB_HASH_ALGORITHM_SHAKE_128 | SHAKE_128 | |
SB_HASH_ALGORITHM_SHAKE_256 | SHAKE_256 | |
SB_HASH_ALGORITHM_SHAKE_128_LEN | SHAKE_128_LEN | |
SB_HASH_ALGORITHM_SHAKE_256_LEN | SHAKE_256_LEN |
keyID
String
Default Value: ""
The ID of the pre-shared key used for DC request authentication.
Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use to pass the key itself.
The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.
Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.
Example:
signer.ExternalCrypto.KeyID = "MainSigningKey";
signer.ExternalCrypto.KeySecret = "abcdef0123456789";
keySecret
String
Default Value: ""
The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.
method
AsyncSignMethods
Default Value: 0
Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.
Available options:
asmdPKCS1 | 0 |
asmdPKCS7 | 1 |
mode
ExternalCryptoModes
Default Value: 0
Specifies the external cryptography mode.
Available options:
ecmDefault | The default value (0) |
ecmDisabled | Do not use DC or external signing (1) |
ecmGeneric | Generic external signing with the OnExternalSign event (2) |
ecmDCAuth | DCAuth signing (3) |
ecmDCAuthJSON | DCAuth signing in JSON format (4) |
publicKeyAlgorithm
String
Default Value: ""
Provide the public key algorithm here if the certificate is not available on the pre-signing stage.
SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION | rsaEncryption | |
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION | md2withRSAEncryption | |
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION | md5withRSAEncryption | |
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION | sha1withRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA | id-dsa | |
SB_CERT_ALGORITHM_ID_DSA_SHA1 | id-dsa-with-sha1 | |
SB_CERT_ALGORITHM_DH_PUBLIC | dhpublicnumber | |
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION | sha224WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION | sha256WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION | sha384WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION | sha512WithRSAEncryption | |
SB_CERT_ALGORITHM_ID_RSAPSS | id-RSASSA-PSS | |
SB_CERT_ALGORITHM_ID_RSAOAEP | id-RSAES-OAEP | |
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160 | ripemd160withRSA | |
SB_CERT_ALGORITHM_ID_ELGAMAL | elGamal | |
SB_CERT_ALGORITHM_SHA1_ECDSA | ecdsa-with-SHA1 | |
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA | ecdsa-recommended | |
SB_CERT_ALGORITHM_SHA224_ECDSA | ecdsa-with-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA | ecdsa-with-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA | ecdsa-with-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA | ecdsa-with-SHA512 | |
SB_CERT_ALGORITHM_EC | id-ecPublicKey | |
SB_CERT_ALGORITHM_SPECIFIED_ECDSA | ecdsa-specified | |
SB_CERT_ALGORITHM_GOST_R3410_1994 | id-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3410_2001 | id-GostR3410-2001 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994 | id-GostR3411-94-with-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001 | id-GostR3411-94-with-GostR3410-2001 | |
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN | ecdsa-plain-SHA1 | |
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN | ecdsa-plain-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN | ecdsa-plain-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN | ecdsa-plain-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN | ecdsa-plain-SHA512 | |
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN | ecdsa-plain-RIPEMD160 | |
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION | whirlpoolWithRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA_SHA224 | id-dsa-with-sha224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA256 | id-dsa-with-sha256 | |
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA | id-ecdsa-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA | id-ecdsa-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA | id-ecdsa-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA | id-ecdsa-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-512 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_224 | id-dsa-with-sha3-224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_256 | id-dsa-with-sha3-256 | |
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA | id-ecdsa-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA | id-ecdsa-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA | id-ecdsa-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA | id-ecdsa-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA | id-ecdsa-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA | id-ecdsa-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA | id-ecdsa-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA | id-ecdsa-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b512 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224 | id-dsa-with-blake2s224 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256 | id-dsa-with-blake2s256 | |
SB_CERT_ALGORITHM_EDDSA_ED25519 | id-Ed25519 | |
SB_CERT_ALGORITHM_EDDSA_ED448 | id-Ed448 | |
SB_CERT_ALGORITHM_EDDSA_ED25519_PH | id-Ed25519ph | |
SB_CERT_ALGORITHM_EDDSA_ED448_PH | id-Ed448ph | |
SB_CERT_ALGORITHM_EDDSA | id-EdDSA | |
SB_CERT_ALGORITHM_EDDSA_SIGNATURE | id-EdDSA-sig |
Constructors
public init()
Creates a new ExternalCrypto object with default field values.
OCSPResponse Type
Represents a single OCSP response originating from an OCSP responder.
Remarks
OCSP is a protocol that allows verification of certificate status in real-time, and is an alternative to Certificate Revocation Lists (CRLs).
An OCSP response is a snapshot of the certificate status at a given time.
Fields
bytes
Data (read-only)
Default Value: ""
A buffer containing the raw OCSP response data.
entryCount
Int32 (read-only)
Default Value: 0
The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.
handle
Int64
Default Value: 0
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.
When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
pdfSigner.setSigningCertHandle(certMgr.getCertHandle());
issuer
String (read-only)
Default Value: ""
Indicates the issuer of this response (a CA or its authorized representative).
issuerRDN
String (read-only)
Default Value: ""
Indicates the RDN of the issuer of this response (a CA or its authorized representative).
location
String (read-only)
Default Value: ""
The location of the OCSP responder.
producedAt
String (read-only)
Default Value: ""
Specifies the time when the response was produced, in UTC.
Constructors
public init()
Creates an empty OCSP response object.
ProxySettings Type
A container for proxy server settings.
Remarks
This type exposes a collection of properties for tuning up the proxy server configuration.
Fields
address
String
Default Value: ""
The IP address of the proxy server.
authentication
ProxyAuthTypes
Default Value: 0
The authentication type used by the proxy server.
patNoAuthentication | 0 |
patBasic | 1 |
patDigest | 2 |
patNTLM | 3 |
password
String
Default Value: ""
The password to authenticate to the proxy server.
port
Int32
Default Value: 0
The port on the proxy server to connect to.
proxyType
ProxyTypes
Default Value: 0
The type of the proxy server.
The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.
cptNone | 0 |
cptSocks4 | 1 |
cptSocks5 | 2 |
cptWebTunnel | 3 |
cptHTTP | 4 |
requestHeaders
String
Default Value: ""
Contains HTTP request headers for WebTunnel and HTTP proxy.
responseBody
String
Default Value: ""
Contains the HTTP or HTTPS (WebTunnel) proxy response body.
responseHeaders
String
Default Value: ""
Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.
useIPv6
Bool
Default Value: False
Specifies whether IPv6 should be used when connecting through the proxy.
useProxy
Bool
Default Value: False
Enables or disables proxy-driven connection.
username
String
Default Value: ""
Specifies the username credential for proxy authentication.
Constructors
public init()
Creates a new ProxySettings object.
SocketSettings Type
A container for the socket settings.
Remarks
This type is a container for socket-layer parameters.
Fields
dnsMode
DNSResolveModes
Default Value: 0
Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.
dmAuto | 0 |
dmPlatform | 1 |
dmOwn | 2 |
dmOwnSecure | 3 |
dnsPort
Int32
Default Value: 0
Specifies the port number to be used for sending queries to the DNS server.
dnsQueryTimeout
Int32
Default Value: 0
The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.
dnsServers
String
Default Value: ""
The addresses of DNS servers to use for address resolution, separated by commas or semicolons.
dnsTotalTimeout
Int32
Default Value: 0
The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.
incomingSpeedLimit
Int32
Default Value: 0
The maximum number of bytes to read from the socket, per second.
localAddress
String
Default Value: ""
The local network interface to bind the socket to.
localPort
Int32
Default Value: 0
The local port number to bind the socket to.
outgoingSpeedLimit
Int32
Default Value: 0
The maximum number of bytes to write to the socket, per second.
timeout
Int32
Default Value: 60000
The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).
useIPv6
Bool
Default Value: False
Enables or disables IP protocol version 6.
Constructors
public init()
Creates a new SocketSettings object.
TLSSettings Type
A container for TLS connection settings.
Remarks
The TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.
Fields
autoValidateCertificates
Bool
Default Value: True
Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.
baseConfiguration
SecureTransportPredefinedConfigurations
Default Value: 0
Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.
stpcDefault | 0 | |
stpcCompatible | 1 | |
stpcComprehensiveInsecure | 2 | |
stpcHighlySecure | 3 |
ciphersuites
String
Default Value: ""
A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.
Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by . Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:
- NULL_NULL_NULL
- RSA_NULL_MD5
- RSA_NULL_SHA
- RSA_RC4_MD5
- RSA_RC4_SHA
- RSA_RC2_MD5
- RSA_IDEA_MD5
- RSA_IDEA_SHA
- RSA_DES_MD5
- RSA_DES_SHA
- RSA_3DES_MD5
- RSA_3DES_SHA
- RSA_AES128_SHA
- RSA_AES256_SHA
- DH_DSS_DES_SHA
- DH_DSS_3DES_SHA
- DH_DSS_AES128_SHA
- DH_DSS_AES256_SHA
- DH_RSA_DES_SHA
- DH_RSA_3DES_SHA
- DH_RSA_AES128_SHA
- DH_RSA_AES256_SHA
- DHE_DSS_DES_SHA
- DHE_DSS_3DES_SHA
- DHE_DSS_AES128_SHA
- DHE_DSS_AES256_SHA
- DHE_RSA_DES_SHA
- DHE_RSA_3DES_SHA
- DHE_RSA_AES128_SHA
- DHE_RSA_AES256_SHA
- DH_ANON_RC4_MD5
- DH_ANON_DES_SHA
- DH_ANON_3DES_SHA
- DH_ANON_AES128_SHA
- DH_ANON_AES256_SHA
- RSA_RC2_MD5_EXPORT
- RSA_RC4_MD5_EXPORT
- RSA_DES_SHA_EXPORT
- DH_DSS_DES_SHA_EXPORT
- DH_RSA_DES_SHA_EXPORT
- DHE_DSS_DES_SHA_EXPORT
- DHE_RSA_DES_SHA_EXPORT
- DH_ANON_RC4_MD5_EXPORT
- DH_ANON_DES_SHA_EXPORT
- RSA_CAMELLIA128_SHA
- DH_DSS_CAMELLIA128_SHA
- DH_RSA_CAMELLIA128_SHA
- DHE_DSS_CAMELLIA128_SHA
- DHE_RSA_CAMELLIA128_SHA
- DH_ANON_CAMELLIA128_SHA
- RSA_CAMELLIA256_SHA
- DH_DSS_CAMELLIA256_SHA
- DH_RSA_CAMELLIA256_SHA
- DHE_DSS_CAMELLIA256_SHA
- DHE_RSA_CAMELLIA256_SHA
- DH_ANON_CAMELLIA256_SHA
- PSK_RC4_SHA
- PSK_3DES_SHA
- PSK_AES128_SHA
- PSK_AES256_SHA
- DHE_PSK_RC4_SHA
- DHE_PSK_3DES_SHA
- DHE_PSK_AES128_SHA
- DHE_PSK_AES256_SHA
- RSA_PSK_RC4_SHA
- RSA_PSK_3DES_SHA
- RSA_PSK_AES128_SHA
- RSA_PSK_AES256_SHA
- RSA_SEED_SHA
- DH_DSS_SEED_SHA
- DH_RSA_SEED_SHA
- DHE_DSS_SEED_SHA
- DHE_RSA_SEED_SHA
- DH_ANON_SEED_SHA
- SRP_SHA_3DES_SHA
- SRP_SHA_RSA_3DES_SHA
- SRP_SHA_DSS_3DES_SHA
- SRP_SHA_AES128_SHA
- SRP_SHA_RSA_AES128_SHA
- SRP_SHA_DSS_AES128_SHA
- SRP_SHA_AES256_SHA
- SRP_SHA_RSA_AES256_SHA
- SRP_SHA_DSS_AES256_SHA
- ECDH_ECDSA_NULL_SHA
- ECDH_ECDSA_RC4_SHA
- ECDH_ECDSA_3DES_SHA
- ECDH_ECDSA_AES128_SHA
- ECDH_ECDSA_AES256_SHA
- ECDHE_ECDSA_NULL_SHA
- ECDHE_ECDSA_RC4_SHA
- ECDHE_ECDSA_3DES_SHA
- ECDHE_ECDSA_AES128_SHA
- ECDHE_ECDSA_AES256_SHA
- ECDH_RSA_NULL_SHA
- ECDH_RSA_RC4_SHA
- ECDH_RSA_3DES_SHA
- ECDH_RSA_AES128_SHA
- ECDH_RSA_AES256_SHA
- ECDHE_RSA_NULL_SHA
- ECDHE_RSA_RC4_SHA
- ECDHE_RSA_3DES_SHA
- ECDHE_RSA_AES128_SHA
- ECDHE_RSA_AES256_SHA
- ECDH_ANON_NULL_SHA
- ECDH_ANON_RC4_SHA
- ECDH_ANON_3DES_SHA
- ECDH_ANON_AES128_SHA
- ECDH_ANON_AES256_SHA
- RSA_NULL_SHA256
- RSA_AES128_SHA256
- RSA_AES256_SHA256
- DH_DSS_AES128_SHA256
- DH_RSA_AES128_SHA256
- DHE_DSS_AES128_SHA256
- DHE_RSA_AES128_SHA256
- DH_DSS_AES256_SHA256
- DH_RSA_AES256_SHA256
- DHE_DSS_AES256_SHA256
- DHE_RSA_AES256_SHA256
- DH_ANON_AES128_SHA256
- DH_ANON_AES256_SHA256
- RSA_AES128_GCM_SHA256
- RSA_AES256_GCM_SHA384
- DHE_RSA_AES128_GCM_SHA256
- DHE_RSA_AES256_GCM_SHA384
- DH_RSA_AES128_GCM_SHA256
- DH_RSA_AES256_GCM_SHA384
- DHE_DSS_AES128_GCM_SHA256
- DHE_DSS_AES256_GCM_SHA384
- DH_DSS_AES128_GCM_SHA256
- DH_DSS_AES256_GCM_SHA384
- DH_ANON_AES128_GCM_SHA256
- DH_ANON_AES256_GCM_SHA384
- ECDHE_ECDSA_AES128_SHA256
- ECDHE_ECDSA_AES256_SHA384
- ECDH_ECDSA_AES128_SHA256
- ECDH_ECDSA_AES256_SHA384
- ECDHE_RSA_AES128_SHA256
- ECDHE_RSA_AES256_SHA384
- ECDH_RSA_AES128_SHA256
- ECDH_RSA_AES256_SHA384
- ECDHE_ECDSA_AES128_GCM_SHA256
- ECDHE_ECDSA_AES256_GCM_SHA384
- ECDH_ECDSA_AES128_GCM_SHA256
- ECDH_ECDSA_AES256_GCM_SHA384
- ECDHE_RSA_AES128_GCM_SHA256
- ECDHE_RSA_AES256_GCM_SHA384
- ECDH_RSA_AES128_GCM_SHA256
- ECDH_RSA_AES256_GCM_SHA384
- PSK_AES128_GCM_SHA256
- PSK_AES256_GCM_SHA384
- DHE_PSK_AES128_GCM_SHA256
- DHE_PSK_AES256_GCM_SHA384
- RSA_PSK_AES128_GCM_SHA256
- RSA_PSK_AES256_GCM_SHA384
- PSK_AES128_SHA256
- PSK_AES256_SHA384
- PSK_NULL_SHA256
- PSK_NULL_SHA384
- DHE_PSK_AES128_SHA256
- DHE_PSK_AES256_SHA384
- DHE_PSK_NULL_SHA256
- DHE_PSK_NULL_SHA384
- RSA_PSK_AES128_SHA256
- RSA_PSK_AES256_SHA384
- RSA_PSK_NULL_SHA256
- RSA_PSK_NULL_SHA384
- RSA_CAMELLIA128_SHA256
- DH_DSS_CAMELLIA128_SHA256
- DH_RSA_CAMELLIA128_SHA256
- DHE_DSS_CAMELLIA128_SHA256
- DHE_RSA_CAMELLIA128_SHA256
- DH_ANON_CAMELLIA128_SHA256
- RSA_CAMELLIA256_SHA256
- DH_DSS_CAMELLIA256_SHA256
- DH_RSA_CAMELLIA256_SHA256
- DHE_DSS_CAMELLIA256_SHA256
- DHE_RSA_CAMELLIA256_SHA256
- DH_ANON_CAMELLIA256_SHA256
- ECDHE_ECDSA_CAMELLIA128_SHA256
- ECDHE_ECDSA_CAMELLIA256_SHA384
- ECDH_ECDSA_CAMELLIA128_SHA256
- ECDH_ECDSA_CAMELLIA256_SHA384
- ECDHE_RSA_CAMELLIA128_SHA256
- ECDHE_RSA_CAMELLIA256_SHA384
- ECDH_RSA_CAMELLIA128_SHA256
- ECDH_RSA_CAMELLIA256_SHA384
- RSA_CAMELLIA128_GCM_SHA256
- RSA_CAMELLIA256_GCM_SHA384
- DHE_RSA_CAMELLIA128_GCM_SHA256
- DHE_RSA_CAMELLIA256_GCM_SHA384
- DH_RSA_CAMELLIA128_GCM_SHA256
- DH_RSA_CAMELLIA256_GCM_SHA384
- DHE_DSS_CAMELLIA128_GCM_SHA256
- DHE_DSS_CAMELLIA256_GCM_SHA384
- DH_DSS_CAMELLIA128_GCM_SHA256
- DH_DSS_CAMELLIA256_GCM_SHA384
- DH_anon_CAMELLIA128_GCM_SHA256
- DH_anon_CAMELLIA256_GCM_SHA384
- ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
- ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
- ECDH_ECDSA_CAMELLIA128_GCM_SHA256
- ECDH_ECDSA_CAMELLIA256_GCM_SHA384
- ECDHE_RSA_CAMELLIA128_GCM_SHA256
- ECDHE_RSA_CAMELLIA256_GCM_SHA384
- ECDH_RSA_CAMELLIA128_GCM_SHA256
- ECDH_RSA_CAMELLIA256_GCM_SHA384
- PSK_CAMELLIA128_GCM_SHA256
- PSK_CAMELLIA256_GCM_SHA384
- DHE_PSK_CAMELLIA128_GCM_SHA256
- DHE_PSK_CAMELLIA256_GCM_SHA384
- RSA_PSK_CAMELLIA128_GCM_SHA256
- RSA_PSK_CAMELLIA256_GCM_SHA384
- PSK_CAMELLIA128_SHA256
- PSK_CAMELLIA256_SHA384
- DHE_PSK_CAMELLIA128_SHA256
- DHE_PSK_CAMELLIA256_SHA384
- RSA_PSK_CAMELLIA128_SHA256
- RSA_PSK_CAMELLIA256_SHA384
- ECDHE_PSK_CAMELLIA128_SHA256
- ECDHE_PSK_CAMELLIA256_SHA384
- ECDHE_PSK_RC4_SHA
- ECDHE_PSK_3DES_SHA
- ECDHE_PSK_AES128_SHA
- ECDHE_PSK_AES256_SHA
- ECDHE_PSK_AES128_SHA256
- ECDHE_PSK_AES256_SHA384
- ECDHE_PSK_NULL_SHA
- ECDHE_PSK_NULL_SHA256
- ECDHE_PSK_NULL_SHA384
- ECDHE_RSA_CHACHA20_POLY1305_SHA256
- ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
- DHE_RSA_CHACHA20_POLY1305_SHA256
- PSK_CHACHA20_POLY1305_SHA256
- ECDHE_PSK_CHACHA20_POLY1305_SHA256
- DHE_PSK_CHACHA20_POLY1305_SHA256
- RSA_PSK_CHACHA20_POLY1305_SHA256
- AES128_GCM_SHA256
- AES256_GCM_SHA384
- CHACHA20_POLY1305_SHA256
- AES128_CCM_SHA256
- AES128_CCM8_SHA256
ecCurves
String
Default Value: ""
Defines the elliptic curves to enable.
extensions
String
Default Value: ""
Provides access to TLS extensions.
forceResumeIfDestinationChanges
Bool
Default Value: False
Whether to force TLS session resumption when the destination address changes.
preSharedIdentity
String
Default Value: ""
Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
preSharedKey
String
Default Value: ""
Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
preSharedKeyCiphersuite
String
Default Value: ""
Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
renegotiationAttackPreventionMode
RenegotiationAttackPreventionModes
Default Value: 0
Selects the renegotiation attack prevention mechanism.
The following options are available:
crapmCompatible | 0 | TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled). |
crapmStrict | 1 | Renegotiation attack prevention is enabled and enforced. |
crapmAuto | 2 | Automatically choose whether to enable or disable renegotiation attack prevention. |
revocationCheck
RevocationCheckKinds
Default Value: 1
Specifies the kind(s) of revocation check to perform.
Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.
crcNone | 0 | No revocation checking. |
crcAuto | 1 | Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future. |
crcAllCRL | 2 | All provided CRL endpoints will be checked, and all checks must succeed. |
crcAllOCSP | 3 | All provided OCSP endpoints will be checked, and all checks must succeed. |
crcAllCRLAndOCSP | 4 | All provided CRL and OCSP endpoints will be checked, and all checks must succeed. |
crcAnyCRL | 5 | All provided CRL endpoints will be checked, and at least one check must succeed. |
crcAnyOCSP | 6 | All provided OCSP endpoints will be checked, and at least one check must succeed. |
crcAnyCRLOrOCSP | 7 | All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first. |
crcAnyOCSPOrCRL | 8 | All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first. |
This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.
There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).
This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.
Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.
Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.
sslOptions
Int32
Default Value: 16
Various SSL (TLS) protocol options, set of
cssloExpectShutdownMessage | 0x001 | Wait for the close-notify message when shutting down the connection |
cssloOpenSSLDTLSWorkaround | 0x002 | (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions |
cssloDisableKexLengthAlignment | 0x004 | Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it. |
cssloForceUseOfClientCertHashAlg | 0x008 | Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it. |
cssloAutoAddServerNameExtension | 0x010 | Automatically add the server name extension when known |
cssloAcceptTrustedSRPPrimesOnly | 0x020 | Accept trusted SRP primes only |
cssloDisableSignatureAlgorithmsExtension | 0x040 | Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it. |
cssloIntolerateHigherProtocolVersions | 0x080 | (server option) Do not allow fallback from TLS versions higher than currently enabled |
cssloStickToPrefCertHashAlg | 0x100 | Stick to preferred certificate hash algorithms |
cssloNoImplicitTLS12Fallback | 0x200 | Disable implicit TLS 1.3 to 1.2 fallbacks |
cssloUseHandshakeBatches | 0x400 | Send the handshake message as large batches rather than individually |
tlsMode
SSLModes
Default Value: 0
Specifies the TLS mode to use.
smDefault | 0 | |
smNoTLS | 1 | Do not use TLS |
smExplicitTLS | 2 | Connect to the server without any encryption and then request an SSL session. |
smImplicitTLS | 3 | Connect to the specified port, and establish the SSL session at once. |
smMixedTLS | 4 | Connect to the specified port, and establish the SSL session at once, but allow plain data. |
useExtendedMasterSecret
Bool
Default Value: False
Enables the Extended Master Secret Extension, as defined in RFC 7627.
useSessionResumption
Bool
Default Value: False
Enables or disables the TLS session resumption capability.
versions
Int32
Default Value: 16
The SSL/TLS versions to enable by default.
csbSSL2 | 0x01 | SSL 2 |
csbSSL3 | 0x02 | SSL 3 |
csbTLS1 | 0x04 | TLS 1.0 |
csbTLS11 | 0x08 | TLS 1.1 |
csbTLS12 | 0x10 | TLS 1.2 |
csbTLS13 | 0x20 | TLS 1.3 |
Constructors
public init()
Creates a new TLSSettings object.
WebDAVListEntry Type
Contains a set of attributes of a single WebDAV object.
Remarks
This type represents a single entry returned by the list command.
Fields
aTime
String
Default Value: ""
Contains the last access time for this object, in UTC.
contentType
String
Default Value: ""
The object's content type.
cTime
String
Default Value: ""
Contains this object's creation time, in UTC.
directory
Bool
Default Value: False
Specifies whether this object is a directory.
displayName
String
Default Value: ""
Contains the display name of the object.
eTag
String
Default Value: ""
An e-tag of the object.
fullURL
String
Default Value: ""
A full path to the object.
mTime
String
Default Value: ""
The last modification time of the object, in UTC.
parentURL
String
Default Value: ""
Specifies the object's parent URL.
size
Int64
Default Value: 0
The size of the object in bytes.
supportsExclusiveLock
Bool
Default Value: False
Indicates whether the entry supports exclusive locking.
supportsSharedLock
Bool
Default Value: False
Indicates whether the entry supports shared lock.
url
String
Default Value: ""
A URL of the object.
Constructors
public init()
Creates a new WebDAVListEntry object.
Config Settings (WebDAVClient Module)
The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.WebDAVClient Config Settings
If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as the TrustedCertificates property) are considered trusted.
- CA, revocation source, TLS key usage requirements are not mandated
- Violation of OCSP issuer requirements are ignored
- The AuthorityKeyID extension in CRL- and certificate-issuing CAs are ignored (helps with incorrectly renewed certificates)
- Basic constraints and name constraints of CA certificates are ignored
- Some weaker algorithms are tolerated
Base Config Settings
You can switch this property off to improve performance if your project only uses known, good private keys.
Supported values are:
off | No caching (default) | |
local | Local caching | |
global | Global caching |
This setting only applies to sessions negotiated with TLS version 1.3.
Supported values are:
file | File | |
console | Console | |
systemlog | System Log (supported for Android only) | |
debugger | Debugger (supported for VCL for Windows and .Net) |
Supported values are:
time | Current time | |
level | Level | |
package | Package name | |
module | Module name | |
class | Class name | |
method | Method name | |
threadid | Thread Id | |
contenttype | Content type | |
content | Content | |
all | All details |
Supported filter names are:
exclude-package | Exclude a package specified in the value | |
exclude-module | Exclude a module specified in the value | |
exclude-class | Exclude a class specified in the value | |
exclude-method | Exclude a method specified in the value | |
include-package | Include a package specified in the value | |
include-module | Include a module specified in the value | |
include-class | Include a class specified in the value | |
include-method | Include a method specified in the value |
none | No flush (caching only) | |
immediate | Immediate flush (real-time logging) | |
maxcount | Flush cached entries upon reaching LogMaxEventCount entries in the cache. |
Supported values are:
none | None (by default) | |
fatal | Severe errors that cause premature termination. | |
error | Other runtime errors or unexpected conditions. | |
warning | Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong". | |
info | Interesting runtime events (startup/shutdown). | |
debug | Detailed information on flow of through the system. | |
trace | More detailed information. |
The default value of this setting is 100.
none | No rotation | |
deleteolder | Delete older entries from the cache upon reaching LogMaxEventCount | |
keepolder | Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded) |
Supported values are:
none | No static DNS rules (default) | |
local | Local static DNS rules | |
global | Global static DNS rules |
This setting only applies to certificates originating from a Windows system store.
Trappable Errors (WebDAVClient Module)
WebDAVClient Errors
1048577 Invalid parameter value (SB_ERROR_INVALID_PARAMETER) | |
1048578 Class is configured incorrectly (SB_ERROR_INVALID_SETUP) | |
1048579 Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE) | |
1048580 Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE) | |
1048581 Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY) | |
1048581 Cancelled by the user (SB_ERROR_CANCELLED_BY_USER) |