XMLVerifier Module

Properties   Methods   Events   Config Settings   Errors  

The XMLVerifier module verifies signed XML files.

Syntax

SecureBlackbox.Xmlverifier

Remarks

Use this control to validate XML-SIG signatures. Note that this component only validates the signatures, but not the signing chains. To validate the signing chains, use XAdESVerifier.

Property List


The following is the full list of the properties of the module with short descriptions. Click on the links for further details.

AllSignaturesValidThe cumulative validity of all signatures.
AutoValidateSignaturesSpecifies whether module should validate any present signatures when the document is opened.
CertificatesA collection of certificates included in the electronic signature.
DataBytesUse this property to pass the external data to module in the byte array form.
DataFileA file containing the external data covered by a detached signature.
DataTypeSpecifies the external data type.
DataURISpecifies a detached data resource URI.
EncodingSpecifies XML encoding.
FIPSModeReserved.
InputBytesUse this property to pass the input to module in byte array form.
InputFileA signed XML file.
KnownCertificatesAdditional certificates for chain validation.
OutputBytesUse this property to read the output the module object has produced.
OutputFileThe file where the modified signed document will be saved.
ReferencesReferences covered by the signature.
SignaturesAll signatures found in the XML document.
XPathNamespacesSpecifies namespaces for the XPath expression.

Method List


The following is the full list of the methods of the module with short descriptions. Click on the links for further details.

CloseCloses an opened document.
ConfigSets or retrieves a configuration setting.
DoActionPerforms an additional action.
GetInnerXMLGet the inner XML content of the selected XML element.
GetOuterXMLGet the outer XML content of the selected XML element.
GetTextContentGet the text content of the selected XML element.
OpenOpens a document for verifying or removing signatures.
RevalidateRevalidates a signature in accordance with current settings.
SetInnerXMLSet the inner XML content of the selected XML element.
SetTextContentSet the text content of the selected XML element.
UnsignDeletes a signature from the document.
VerifyVerifies a signed XML document.
VerifyDetachedVerifies a detached signature over external XML data.

Event List


The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.

DocumentLoadedThis event is fired when the document has been loaded into memory.
ErrorInformation about errors during signature verification.
NotificationThis event notifies the application about an underlying control flow event.
ReferenceValidatedMarks the end of a reference validation.
ResolveReferenceAsks the application to resolve a reference.
SignatureFoundSignifies the start of signature validation.
SignatureValidatedReports the signature validation result.

Config Settings


The following is a list of config settings for the module with short descriptions. Click on the links for further details.

DataTypeSpecifies the external data type.
DetachedResourceURISpecifies a detached resource URI.
HMACKeyThe key value for HMAC.
HMACSigningUsedWhether HMAC signing was used.
IDAttributeNameSpecifies the custom name of ID attribute.
IDAttributeNamespaceURISpecifies the custom namespace URI of ID attribute.
InclusiveNamespacesPrefixListSpecifies the InclusiveNamespaces PrefixList.
KeyNameIdentifies the key.
ManifestCountThe number of the manifest elements.
ManifestID[Index]The ID of the manifest element.
ManifestObjectIndex[Index]The object element index to which the manifest element belongs.
ManifestXML[Index]The XML content of the manifest element.
ObjectCountThe number of the object elements.
ObjectEncoding[Index]The Encoding of the object element.
ObjectID[Index]The ID of the object element.
ObjectMimeType[Index]The MIME type of the object element.
ObjectSignaturePropertiesCountThe number of the signature properties elements.
ObjectSignaturePropertiesID[Index]The ID of the signature properties element.
ObjectSignaturePropertiesObjectIndex[Index]The object element index to which the signature properties element belongs.
ObjectSignaturePropertiesXML[Index]The XML content of the signature properties element.
ObjectSignaturePropertyCountThe number of the signature property elements.
ObjectSignaturePropertyID[Index]The ID of the signature properties element.
ObjectSignaturePropertyPropertiesIndex[Index]The signature properties element index to which the signature property element belongs.
ObjectSignaturePropertyTarget[Index]The Target of the signature properties element.
ObjectSignaturePropertyXML[Index]The XML content of the signature property element.
ObjectXML[Index]The XML content of the object element.
PSSUsedWhether RSASSA-PSS mode was used.
SignatureComplianceSIgnature compliance with XMLDSig/EBICS.
SignatureIDContains the ID for Signature element.
TempPathLocation where the temporary files are stored.
CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the module.
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNSSpecifies whether static DNS rules should be used.
StaticIPAddress[domain]Gets or sets an IP address for the specified domain name.
StaticIPAddressesGets or sets all the static DNS rules.
TagAllows to store any custom data.
TLSSessionGroupSpecifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetimeSpecifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeIntervalSpecifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolverSpecifies whether the client modules should use own DNS resolver.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

AllSignaturesValid Property (XMLVerifier Module)

The cumulative validity of all signatures.

Syntax

public var allSignaturesValid: Bool {
  get {...}
}

@property (nonatomic,readonly,assign,getter=allSignaturesValid) BOOL allSignaturesValid;

- (BOOL)allSignaturesValid;

Default Value

False

Remarks

Use this property to check if all the signatures found in the message or document are valid.

This property is read-only.

AutoValidateSignatures Property (XMLVerifier Module)

Specifies whether module should validate any present signatures when the document is opened.

Syntax

public var autoValidateSignatures: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=autoValidateSignatures,setter=setAutoValidateSignatures:) BOOL autoValidateSignatures;

- (BOOL)autoValidateSignatures;
- (void)setAutoValidateSignatures :(BOOL)newAutoValidateSignatures;

Default Value

True

Remarks

This setting is switched on by default. You can choose to set this property to false in order to validate the signatures manually on a later stage using the Revalidate method.

Certificates Property (XMLVerifier Module)

A collection of certificates included in the electronic signature.

Syntax

public var certificates: Array<Certificate> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=certCount) int certCount;

- (int)certCount;

- (NSData*)certBytes:(int)certIndex;

- (BOOL)certCA:(int)certIndex;

- (NSData*)certCAKeyID:(int)certIndex;

- (NSString*)certCRLDistributionPoints:(int)certIndex;

- (NSString*)certCurve:(int)certIndex;

- (NSData*)certFingerprint:(int)certIndex;

- (NSString*)certFriendlyName:(int)certIndex;

- (long long)certHandle:(int)certIndex;

- (NSString*)certHashAlgorithm:(int)certIndex;

- (NSString*)certIssuer:(int)certIndex;

- (NSString*)certIssuerRDN:(int)certIndex;

- (NSString*)certKeyAlgorithm:(int)certIndex;

- (int)certKeyBits:(int)certIndex;

- (NSData*)certKeyFingerprint:(int)certIndex;

- (int)certKeyUsage:(int)certIndex;

- (BOOL)certKeyValid:(int)certIndex;

- (NSString*)certOCSPLocations:(int)certIndex;

- (NSString*)certPolicyIDs:(int)certIndex;

- (NSData*)certPublicKeyBytes:(int)certIndex;

- (BOOL)certSelfSigned:(int)certIndex;

- (NSData*)certSerialNumber:(int)certIndex;

- (NSString*)certSigAlgorithm:(int)certIndex;

- (NSString*)certSubject:(int)certIndex;

- (NSData*)certSubjectKeyID:(int)certIndex;

- (NSString*)certSubjectRDN:(int)certIndex;

- (NSString*)certValidFrom:(int)certIndex;

- (NSString*)certValidTo:(int)certIndex;

Default Value

""

Remarks

Use this property to access all certificates included into the signature(s) by its creator.

DataBytes Property (XMLVerifier Module)

Use this property to pass the external data to module in the byte array form.

Syntax

public var dataBytes: Data {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=dataBytes,setter=setDataBytes:) NSData* dataBytes;

- (NSData*)dataBytes;
- (void)setDataBytes :(NSData*)newDataBytes;

Remarks

Assign a byte array containing the external data to be processed to this property.

DataFile Property (XMLVerifier Module)

A file containing the external data covered by a detached signature.

Syntax

public var dataFile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=dataFile,setter=setDataFile:) NSString* dataFile;

- (NSString*)dataFile;
- (void)setDataFile :(NSString*)newDataFile;

Default Value

""

Remarks

In the case of a detached signature, use this property to provide the external data to the class from a file. Alternatively, provide the data via DataStream.

DataType Property (XMLVerifier Module)

Specifies the external data type.

Syntax

public var dataType: XmlverifierDataTypes {
  get {...}
  set {...}
}

public enum XmlverifierDataTypes: Int32 { case cxdtXML = 0 case cxdtBinary = 1 case cxdtBase64 = 2 }

@property (nonatomic,readwrite,assign,getter=dataType,setter=setDataType:) int dataType;

- (int)dataType;
- (void)setDataType :(int)newDataType;

Default Value

0

Remarks

Use this property to specify the type of the external data (either DataFile, DataStream or DataBytes properties) for class.

DataURI Property (XMLVerifier Module)

Specifies a detached data resource URI.

Syntax

public var dataURI: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=dataURI,setter=setDataURI:) NSString* dataURI;

- (NSString*)dataURI;
- (void)setDataURI :(NSString*)newDataURI;

Default Value

""

Remarks

Specifies a URI used for data being signed, usually the data filename if stored along with a detached signature.

Encoding Property (XMLVerifier Module)

Specifies XML encoding.

Syntax

public var encoding: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=encoding,setter=setEncoding:) NSString* encoding;

- (NSString*)encoding;
- (void)setEncoding :(NSString*)newEncoding;

Default Value

""

Remarks

Use this property to specify the encoding to apply to the XML documents.

FIPSMode Property (XMLVerifier Module)

Reserved.

Syntax

public var fipsMode: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=FIPSMode,setter=setFIPSMode:) BOOL FIPSMode;

- (BOOL)FIPSMode;
- (void)setFIPSMode :(BOOL)newFIPSMode;

Default Value

False

Remarks

This property is reserved for future use.

InputBytes Property (XMLVerifier Module)

Use this property to pass the input to module in byte array form.

Syntax

public var inputBytes: Data {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=inputBytes,setter=setInputBytes:) NSData* inputBytes;

- (NSData*)inputBytes;
- (void)setInputBytes :(NSData*)newInputBytes;

Remarks

Assign a byte array containing the data to be processed to this property.

InputFile Property (XMLVerifier Module)

A signed XML file.

Syntax

public var inputFile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=inputFile,setter=setInputFile:) NSString* inputFile;

- (NSString*)inputFile;
- (void)setInputFile :(NSString*)newInputFile;

Default Value

""

Remarks

Provide a path to the signed XML document in this property.

KnownCertificates Property (XMLVerifier Module)

Additional certificates for chain validation.

Syntax

public var knownCertificates: Array<Certificate> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=knownCertCount,setter=setKnownCertCount:) int knownCertCount;

- (int)knownCertCount;
- (void)setKnownCertCount :(int)newKnownCertCount;

- (NSData*)knownCertBytes:(int)knownCertIndex;

- (long long)knownCertHandle:(int)knownCertIndex;
- (void)setKnownCertHandle:(int)knownCertIndex :(long long)newKnownCertHandle;

Default Value

""

Remarks

Use this property to supply a list of additional certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when intermediary CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the class manually.

The purpose of the certificates to be added to this collection is roughly equivalent to that of the Intermediate Certification Authorities system store in Windows.

Do not add trust anchors or root certificates to this collection: add them to TrustedCertificates instead.

OutputBytes Property (XMLVerifier Module)

Use this property to read the output the module object has produced.

Syntax

public var outputBytes: Data {
  get {...}
}

@property (nonatomic,readonly,assign,getter=outputBytes) NSData* outputBytes;

- (NSData*)outputBytes;

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.

This property is read-only.

OutputFile Property (XMLVerifier Module)

The file where the modified signed document will be saved.

Syntax

public var outputFile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=outputFile,setter=setOutputFile:) NSString* outputFile;

- (NSString*)outputFile;
- (void)setOutputFile :(NSString*)newOutputFile;

Default Value

""

Remarks

Provide the full path to the file where the modified signed document should be saved.

References Property (XMLVerifier Module)

References covered by the signature.

Syntax

public var references: Array<XMLReference> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=referenceCount) int referenceCount;

- (int)referenceCount;

- (BOOL)referenceAutoGenerateElementId:(int)referenceIndex;

- (int)referenceCanonicalizationMethod:(int)referenceIndex;

- (NSString*)referenceCustomElementId:(int)referenceIndex;

- (NSData*)referenceDigestValue:(int)referenceIndex;

- (long long)referenceHandle:(int)referenceIndex;

- (NSString*)referenceHashAlgorithm:(int)referenceIndex;

- (BOOL)referenceHasURI:(int)referenceIndex;

- (NSString*)referenceID:(int)referenceIndex;

- (NSString*)referenceInclusiveNamespacesPrefixList:(int)referenceIndex;

- (NSString*)referenceReferenceType:(int)referenceIndex;

- (int)referenceSignatureIndex:(int)referenceIndex;

- (NSData*)referenceTargetData:(int)referenceIndex;

- (int)referenceTargetType:(int)referenceIndex;

- (NSString*)referenceTargetXMLElement:(int)referenceIndex;

- (NSString*)referenceURI:(int)referenceIndex;

- (BOOL)referenceUseBase64Transform:(int)referenceIndex;

- (BOOL)referenceUseEnvelopedSignatureTransform:(int)referenceIndex;

- (BOOL)referenceUseXPathFilter2Transform:(int)referenceIndex;

- (BOOL)referenceUseXPathTransform:(int)referenceIndex;

- (NSString*)referenceXPathExpression:(int)referenceIndex;

- (NSString*)referenceXPathFilter2Expressions:(int)referenceIndex;

- (NSString*)referenceXPathFilter2Filters:(int)referenceIndex;

- (NSString*)referenceXPathFilter2PrefixList:(int)referenceIndex;

- (NSString*)referenceXPathPrefixList:(int)referenceIndex;

Default Value

""

Remarks

Use this property to get the references to the data covered by the signature.

Signatures Property (XMLVerifier Module)

All signatures found in the XML document.

Syntax

public var signatures: Array<XMLSignature> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=signatureCount) int signatureCount;

- (int)signatureCount;

- (int)signatureCanonicalizationMethod:(int)signatureIndex;

- (int)signatureCertificateIndex:(int)signatureIndex;

- (long long)signatureHandle:(int)signatureIndex;

- (NSString*)signatureHashAlgorithm:(int)signatureIndex;

- (NSString*)signatureIssuerRDN:(int)signatureIndex;

- (NSData*)signatureSerialNumber:(int)signatureIndex;

- (NSData*)signatureSignatureBytes:(int)signatureIndex;

- (int)signatureSignatureType:(int)signatureIndex;

- (int)signatureSignatureValidationResult:(int)signatureIndex;

- (NSData*)signatureSubjectKeyID:(int)signatureIndex;

- (NSString*)signatureSubjectRDN:(int)signatureIndex;

- (NSString*)signatureXMLElement:(int)signatureIndex;

Default Value

""

Remarks

This property contains a list of all signatures made over the XML document.

XPathNamespaces Property (XMLVerifier Module)

Specifies namespaces for the XPath expression.

Syntax

public var xPathNamespaces: Array<XMLNamespace> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=namespaceCount,setter=setNamespaceCount:) int namespaceCount;

- (int)namespaceCount;
- (void)setNamespaceCount :(int)newNamespaceCount;

- (NSString*)namespacePrefix:(int)namespaceIndex;
- (void)setNamespacePrefix:(int)namespaceIndex :(NSString*)newNamespacePrefix;

- (NSString*)namespaceURI:(int)namespaceIndex;
- (void)setNamespaceURI:(int)namespaceIndex :(NSString*)newNamespaceURI;

Default Value

""

Remarks

This property contains a list of prefixes and namespaceURIs that are used in XPath expression with TargetXMLElement property of the references.

Close Method (XMLVerifier Module)

Closes an opened document.

Syntax

public func close(saveChanges: Bool) throws -> Void
- (void)close:(BOOL)saveChanges;

Remarks

Use this method to close a previously opened document. Set SaveChanges to true to apply any changes made.

Config Method (XMLVerifier Module)

Sets or retrieves a configuration setting.

Syntax

public func config(configurationString: String) throws -> String
- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (XMLVerifier Module)

Performs an additional action.

Syntax

public func doAction(actionID: String, actionParams: String) throws -> String
- (NSString*)doAction:(NSString*)actionID :(NSString*)actionParams;

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

GetInnerXML Method (XMLVerifier Module)

Get the inner XML content of the selected XML element.

Syntax

public func getInnerXML(xPath: String) throws -> String
- (NSString*)getInnerXML:(NSString*)XPath;

Remarks

Call this method to get the inner XML content of the selected XML element.

GetOuterXML Method (XMLVerifier Module)

Get the outer XML content of the selected XML element.

Syntax

public func getOuterXML(xPath: String) throws -> String
- (NSString*)getOuterXML:(NSString*)XPath;

Remarks

Call this method to get the outer XML content of the selected XML element.

GetTextContent Method (XMLVerifier Module)

Get the text content of the selected XML element.

Syntax

public func getTextContent(xPath: String) throws -> String
- (NSString*)getTextContent:(NSString*)XPath;

Remarks

Call this method to get the text content of the selected XML element.

Open Method (XMLVerifier Module)

Opens a document for verifying or removing signatures.

Syntax

public func open() throws -> Void
- (void)open;

Remarks

Use this method to open a document for verifying or removing signatures. When finished, call Close to complete or discard the operation.

Revalidate Method (XMLVerifier Module)

Revalidates a signature in accordance with current settings.

Syntax

public func revalidate(index: Int32, detached: Bool) throws -> Void
- (void)revalidate:(int)index :(BOOL)detached;

Remarks

Use this method to re-validate a signature in the opened XML document.

SetInnerXML Method (XMLVerifier Module)

Set the inner XML content of the selected XML element.

Syntax

public func setInnerXML(xPath: String, value: String) throws -> Void
- (void)setInnerXML:(NSString*)XPath :(NSString*)value;

Remarks

Call this method to set the inner XML content of the selected XML element.

SetTextContent Method (XMLVerifier Module)

Set the text content of the selected XML element.

Syntax

public func setTextContent(xPath: String, value: String) throws -> Void
- (void)setTextContent:(NSString*)XPath :(NSString*)value;

Remarks

Call this method to set the text content of the selected XML element.

Unsign Method (XMLVerifier Module)

Deletes a signature from the document.

Syntax

public func unsign(sigIndex: Int32) throws -> Void
- (void)unsign:(int)sigIndex;

Remarks

Use this method to delete an existing signature from the document. Use SigIndex parameter to specify the signature to be removed.

Verify Method (XMLVerifier Module)

Verifies a signed XML document.

Syntax

public func verify() throws -> Void
- (void)verify;

Remarks

Call this method to verify the signature embedded in the document. Pass the document via InputStream or InputFile property. Use VerifyDetached to verify the external data in case of a detached signature.

VerifyDetached Method (XMLVerifier Module)

Verifies a detached signature over external XML data.

Syntax

public func verifyDetached() throws -> Void
- (void)verifyDetached;

Remarks

Call this method to verify a signature over external (detached) data provided via DataStream or DataFile.

DocumentLoaded Event (XMLVerifier Module)

This event is fired when the document has been loaded into memory.

Syntax

func onDocumentLoaded(cancel: inout Bool)
- (void)onDocumentLoaded:(int*)cancel;

Remarks

The handler for this event is a good place to check document properties, which may be useful when preparing the signature, for example, the document format.

Set Cancel to true to terminate document processing on this stage.

Error Event (XMLVerifier Module)

Information about errors during signature verification.

Syntax

func onError(errorCode: Int32, description: String)
- (void)onError:(int)errorCode :(NSString*)description;

Remarks

The event is fired in case of exceptional conditions during verification.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to XML.

Notification Event (XMLVerifier Module)

This event notifies the application about an underlying control flow event.

Syntax

func onNotification(eventID: String, eventParam: String)
- (void)onNotification:(NSString*)eventID :(NSString*)eventParam;

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

ReferenceValidated Event (XMLVerifier Module)

Marks the end of a reference validation.

Syntax

func onReferenceValidated(referenceIndex: Int32, id: String, uri: String, refType: String, digestValid: Bool)
- (void)onReferenceValidated:(int)referenceIndex :(NSString*)ID :(NSString*)URI :(NSString*)refType :(BOOL)digestValid;

Remarks

The class fires this event to report completion of a reference validation. A reference is a building block of a signature as it binds signature coverage to a particular piece of the document.

ResolveReference Event (XMLVerifier Module)

Asks the application to resolve a reference.

Syntax

func onResolveReference(referenceIndex: Int32, uri: String)
- (void)onResolveReference:(int)referenceIndex :(NSString*)URI;

Remarks

This event is fired when the control could not automatically resolve a reference and requires custom treatment.

URI contains a reference to the data.

ReferenceIndex specifies the index of the reference to process.

Based on the reference's URI the event handler should set either TargetXMLElement or TargetData property of the reference.

SignatureFound Event (XMLVerifier Module)

Signifies the start of signature validation.

Syntax

func onSignatureFound(index: Int32, issuerRDN: String, serialNumber: Data, subjectKeyID: Data, certFound: Bool, validateSignature: inout Bool, validateChain: inout Bool)
- (void)onSignatureFound:(int)index :(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID :(BOOL)certFound :(int*)validateSignature :(int*)validateChain;

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound parameter is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (XMLVerifier Module)

Reports the signature validation result.

Syntax

func onSignatureValidated(sigIndex: Int32, issuerRDN: String, serialNumber: Data, subjectKeyID: Data, validationResult: Int32)
- (void)onSignatureValidated:(int)sigIndex :(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID :(int)validationResult;

Remarks

This event is fired when the complete XML signature validation process is finished. IssuerRDN returns the name of the signature issuer, SerialNumber identifies the signing certificate, SubjectKeyID contains the key identifier (SecureBlackbox uses SHA-1 hash algorithm output as key identifiers). Finally, ValidationResult specifies whether signature is valid or not:

xsvValid0
xsvUnknown1
xsvCorrupted2
xsvSignerNotFound3
xsvFailure4
xsvReferenceCorrupted5

Certificate Type

Provides details of an individual X.509 certificate.

Remarks

This type provides access to X.509 certificate details.

Fields

bytes
Data (read-only)

Default Value: ""

Returns the raw certificate data in DER format.

ca
Bool

Default Value: False

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

caKeyID
Data (read-only)

Default Value: ""

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

crlDistributionPoints
String

Default Value: ""

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

curve
String

Default Value: ""

Specifies the elliptic curve of the EC public key.

SB_EC_SECP112R1SECP112R1
SB_EC_SECP112R2SECP112R2
SB_EC_SECP128R1SECP128R1
SB_EC_SECP128R2SECP128R2
SB_EC_SECP160K1SECP160K1
SB_EC_SECP160R1SECP160R1
SB_EC_SECP160R2SECP160R2
SB_EC_SECP192K1SECP192K1
SB_EC_SECP192R1SECP192R1
SB_EC_SECP224K1SECP224K1
SB_EC_SECP224R1SECP224R1
SB_EC_SECP256K1SECP256K1
SB_EC_SECP256R1SECP256R1
SB_EC_SECP384R1SECP384R1
SB_EC_SECP521R1SECP521R1
SB_EC_SECT113R1SECT113R1
SB_EC_SECT113R2SECT113R2
SB_EC_SECT131R1SECT131R1
SB_EC_SECT131R2SECT131R2
SB_EC_SECT163K1SECT163K1
SB_EC_SECT163R1SECT163R1
SB_EC_SECT163R2SECT163R2
SB_EC_SECT193R1SECT193R1
SB_EC_SECT193R2SECT193R2
SB_EC_SECT233K1SECT233K1
SB_EC_SECT233R1SECT233R1
SB_EC_SECT239K1SECT239K1
SB_EC_SECT283K1SECT283K1
SB_EC_SECT283R1SECT283R1
SB_EC_SECT409K1SECT409K1
SB_EC_SECT409R1SECT409R1
SB_EC_SECT571K1SECT571K1
SB_EC_SECT571R1SECT571R1
SB_EC_PRIME192V1PRIME192V1
SB_EC_PRIME192V2PRIME192V2
SB_EC_PRIME192V3PRIME192V3
SB_EC_PRIME239V1PRIME239V1
SB_EC_PRIME239V2PRIME239V2
SB_EC_PRIME239V3PRIME239V3
SB_EC_PRIME256V1PRIME256V1
SB_EC_C2PNB163V1C2PNB163V1
SB_EC_C2PNB163V2C2PNB163V2
SB_EC_C2PNB163V3C2PNB163V3
SB_EC_C2PNB176W1C2PNB176W1
SB_EC_C2TNB191V1C2TNB191V1
SB_EC_C2TNB191V2C2TNB191V2
SB_EC_C2TNB191V3C2TNB191V3
SB_EC_C2ONB191V4C2ONB191V4
SB_EC_C2ONB191V5C2ONB191V5
SB_EC_C2PNB208W1C2PNB208W1
SB_EC_C2TNB239V1C2TNB239V1
SB_EC_C2TNB239V2C2TNB239V2
SB_EC_C2TNB239V3C2TNB239V3
SB_EC_C2ONB239V4C2ONB239V4
SB_EC_C2ONB239V5C2ONB239V5
SB_EC_C2PNB272W1C2PNB272W1
SB_EC_C2PNB304W1C2PNB304W1
SB_EC_C2TNB359V1C2TNB359V1
SB_EC_C2PNB368W1C2PNB368W1
SB_EC_C2TNB431R1C2TNB431R1
SB_EC_NISTP192NISTP192
SB_EC_NISTP224NISTP224
SB_EC_NISTP256NISTP256
SB_EC_NISTP384NISTP384
SB_EC_NISTP521NISTP521
SB_EC_NISTB163NISTB163
SB_EC_NISTB233NISTB233
SB_EC_NISTB283NISTB283
SB_EC_NISTB409NISTB409
SB_EC_NISTB571NISTB571
SB_EC_NISTK163NISTK163
SB_EC_NISTK233NISTK233
SB_EC_NISTK283NISTK283
SB_EC_NISTK409NISTK409
SB_EC_NISTK571NISTK571
SB_EC_GOSTCPTESTGOSTCPTEST
SB_EC_GOSTCPAGOSTCPA
SB_EC_GOSTCPBGOSTCPB
SB_EC_GOSTCPCGOSTCPC
SB_EC_GOSTCPXCHAGOSTCPXCHA
SB_EC_GOSTCPXCHBGOSTCPXCHB
SB_EC_BRAINPOOLP160R1BRAINPOOLP160R1
SB_EC_BRAINPOOLP160T1BRAINPOOLP160T1
SB_EC_BRAINPOOLP192R1BRAINPOOLP192R1
SB_EC_BRAINPOOLP192T1BRAINPOOLP192T1
SB_EC_BRAINPOOLP224R1BRAINPOOLP224R1
SB_EC_BRAINPOOLP224T1BRAINPOOLP224T1
SB_EC_BRAINPOOLP256R1BRAINPOOLP256R1
SB_EC_BRAINPOOLP256T1BRAINPOOLP256T1
SB_EC_BRAINPOOLP320R1BRAINPOOLP320R1
SB_EC_BRAINPOOLP320T1BRAINPOOLP320T1
SB_EC_BRAINPOOLP384R1BRAINPOOLP384R1
SB_EC_BRAINPOOLP384T1BRAINPOOLP384T1
SB_EC_BRAINPOOLP512R1BRAINPOOLP512R1
SB_EC_BRAINPOOLP512T1BRAINPOOLP512T1
SB_EC_CURVE25519CURVE25519
SB_EC_CURVE448CURVE448

fingerprint
Data (read-only)

Default Value: ""

Contains the fingerprint (a hash imprint) of this certificate.

friendlyName
String (read-only)

Default Value: ""

Contains an associated alias (friendly name) of the certificate.

handle
Int64

Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

hashAlgorithm
String

Default Value: ""

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

issuer
String (read-only)

Default Value: ""

The common name of the certificate issuer (CA), typically a company name.

issuerRDN
String

Default Value: ""

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

keyAlgorithm
String

Default Value: "0"

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

keyBits
Int32 (read-only)

Default Value: 0

Returns the length of the public key.

keyFingerprint
Data (read-only)

Default Value: ""

Returns a fingerprint of the public key contained in the certificate.

keyUsage
Int32

Default Value: 0

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

keyValid
Bool (read-only)

Default Value: False

Returns True if the certificate's key is cryptographically valid, and False otherwise.

ocspLocations
String

Default Value: ""

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

ocspNoCheck
Bool

Default Value: False

Accessor to the value of the certificate's ocsp-no-check extension.

origin
Int32 (read-only)

Default Value: 0

Returns the origin of this certificate.

policyIDs
String

Default Value: ""

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

privateKeyBytes
Data (read-only)

Default Value: ""

Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.

privateKeyExists
Bool (read-only)

Default Value: False

Indicates whether the certificate has an associated private key.

privateKeyExtractable
Bool (read-only)

Default Value: False

Indicates whether the private key is extractable.

publicKeyBytes
Data (read-only)

Default Value: ""

Contains the certificate's public key in DER format.

qualifiedStatements
QualifiedStatementsTypes

Default Value: 0

Returns the qualified status of the certificate.

selfSigned
Bool (read-only)

Default Value: False

Indicates whether the certificate is self-signed (root) or signed by an external CA.

serialNumber
Data

Default Value: ""

Returns the certificate's serial number.

sigAlgorithm
String (read-only)

Default Value: ""

Indicates the algorithm that was used by the CA to sign this certificate.

subject
String (read-only)

Default Value: ""

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

subjectAlternativeName
String

Default Value: ""

Returns or sets the value of the Subject Alternative Name extension of the certificate.

subjectKeyID
Data

Default Value: ""

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

subjectRDN
String

Default Value: ""

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

validFrom
String

Default Value: ""

The time point at which the certificate becomes valid, in UTC.

validTo
String

Default Value: ""

The time point at which the certificate expires, in UTC.

Constructors

public init(stream: )

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.

public init()

Creates a new object with default field values.

XMLNamespace Type

Represents an XML namespace map for XPath expressions.

Remarks

This class defines the correspondence between Prefixes and namespace URIs.

Fields

prefix
String

Default Value: ""

A user-defined prefix value of a namespace.

uri
String

Default Value: ""

A user-defined URI value of a namespace.

Constructors

public init()

Creates a new XML namespace object.

XMLReference Type

Represents an XML reference element.

Remarks

XMLReference specifies the digest algorithm and digest value, and, optionally: an identifier of the object being signed, the type of the object, and/or a list of transforms to be applied prior to digesting.

Fields

autoGenerateElementId
Bool

Default Value: False

Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing. Used when the referenced element doesn't have an ID and CustomElementId and URI properties are empty.

canonicalizationMethod
XMLCanonicalizationMethods

Default Value: 0

Use this property to specify the canonicalization method for the transform of the reference. Use cxcmNone value to not to include canonicalization transform in transform chain. See XML-Signature Syntax and Processing specification for details.

cxcmNone0
cxcmCanon1
cxcmCanonComment2
cxcmExclCanon3
cxcmExclCanonComment4
cxcmMinCanon5
cxcmCanon_v1_16
cxcmCanonComment_v1_17

customElementId
String

Default Value: ""

Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing. Used when the referenced element doesn't have an ID and URI property is empty.

digestValue
Data

Default Value: ""

Use this property to get or set the value of the digest calculated over the referenced data.

This property is optional and should be set only if you don't provide the actual data via TargetData or URI. If the data is set, then you don't need to set DigestValue since it will be calculated automatically.

handle
Int64

Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

hashAlgorithm
String

Default Value: "SHA256"

Specifies the hash algorithm to be used.

Supported values:

SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512

hasURI
Bool

Default Value: True

Specifies whether the URI is set (even when it is empty).

id
String

Default Value: ""

A user-defined identifier (ID) attribute of this Reference element.

inclusiveNamespacesPrefixList
String

Default Value: ""

Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference. See XML-Signature Syntax and Processing specification for details.

referenceType
String

Default Value: ""

The Reference's type attribute as defined in XMLDSIG specification.

signatureIndex
Int32 (read-only)

Default Value: -1

Returns the index of the owner signature, if applicable.

Use this property to establish the index of the associated signature object in the signature collection.

targetData
Data

Default Value: ""

Contains the referenced external data when the digest value is not explicitly specified.

This property is optional and should only be set if you reference the external data via URI, and you don't provide the digest value explicitly via DigestValue.

targetType
XMLReferenceTargetTypes

Default Value: 0

The reference's target type to use.

Use this property to specify the reference's target type to use when forming the signature.

targetXMLElement
String

Default Value: ""

This property specifies the referenced XML element. Used when the URI property is not set. In this case, the URI value is generated based on the ID of the referenced (target) XML element. If the URI property is set, this property is ignored until the ResolveReference event.

Supported values are:

""an empty string indicates the Document element.
"#id"indicates an XML element with specified Id.
XPointer expressionindicates an XML element selected using XPointer expression. Use the XPathNamespaces property to specify Prefixes and NamespaceURIs

For example:

"/root/data[1]" - indicates the second "data" element under the document element with a name "root"

"//ns1:data" - indicates a data element. "ns1" prefix should be defined in XPathNamespaces property

Node nameindicates an XML element selected using its NodeName.

For example: "data" - indicates an XML element with node name "data".

uri
String

Default Value: ""

Use this property to get or set the URL which references the data. If the data is external, the application must set either TargetData or DigestValue. If TargetData is set, the digest is calculated automatically unless it is explicitly set by the application via DigestValue.

useBase64Transform
Bool

Default Value: False

Specifies whether Base64 transform is included in transform chain.

useEnvelopedSignatureTransform
Bool

Default Value: False

Specifies whether enveloped signature transform is included in transform chain.

useXPathFilter2Transform
Bool

Default Value: False

Specifies whether XPath Filter 2.0 transform is included in transform chain.

useXPathTransform
Bool

Default Value: False

Specifies whether XPath transform is included in transform chain.

xPathExpression
String

Default Value: ""

Use this property to specify XPath expression for XPath transform of the reference.

xPathFilter2Expressions
String

Default Value: ""

Use this property to specify XPointer expression(s) for XPath Filter 2.0 transform of the reference.

xPathFilter2Filters
String

Default Value: ""

Use this property to specify XPointer filter(s) for XPath Filter 2.0 transform of the reference. The prefix list is comma-separated.

Supported values:

"intersect"Intersect filter computes the intersection of the selected subtrees with the filter node-set.
"subtract"Subtract filter computes the subtraction of the selected subtrees with the filter node-set.
"union"Union filter computes the union of the selected subtrees with the filter node-set.

xPathFilter2PrefixList
String

Default Value: ""

Use this property to specify a prefix list for XPath Filter 2.0 transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.

xPathPrefixList
String

Default Value: ""

Use this property to specify a prefix list for XPath transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.

Constructors

public init()

Creates a new XML reference element.

public init(iD: )

Creates a new XML reference element from its ID .

public init(iD: , uRI: )

Creates a new XML reference element from its ID and URI reference to the external data.

XMLSignature Type

The component is a container for an XML signature.

Remarks

XML document may include any number of XML signatures. class stores on of them.

Fields

canonicalizationMethod
XMLCanonicalizationMethods

Default Value: 0

The XML canonicalization method that was used for signing.

Supported canonicalization methods:

cxcmNone0
cxcmCanon1
cxcmCanonComment2
cxcmExclCanon3
cxcmExclCanonComment4
cxcmMinCanon5
cxcmCanon_v1_16
cxcmCanonComment_v1_17

certificateIndex
Int32 (read-only)

Default Value: -1

Returns the index of the signing certificate in the Certificates collection

Use this property to look up the signing certificate in the Certificates collection.

handle
Int64

Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

hashAlgorithm
String

Default Value: "Unknown"

The hash algorithm used for signing.

SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512

issuerRDN
String (read-only)

Default Value: ""

The Relative Distinguished Name of the signing certificate's issuer.

A collection of information, in the form of [OID, Value] pairs, about the company that issued the signing certificate.

serialNumber
Data (read-only)

Default Value: ""

The serial number of the timestamp.

signatureBytes
Data (read-only)

Default Value: ""

Returns the binary representation of the XML signature.

signatureType
XMLSignatureTypes

Default Value: 4

The signature type to employ when signing the document.

This property specifies the signature type to be used when signing the document.

Supported values:

cxstDetached1Specifies whether a detached signature should be produced. I.e., a signature which is kept separately from the signed document.
cxstEnveloping2Specifies whether an enveloping signature should be produced.
cxstEnveloped4Specifies whether an enveloped signature should be produced.

signatureValidationResult
XMLSignatureValidities (read-only)

Default Value: 0

Contains the signature validation result.

Use this property to check the result of the most recent XML signature validation.

xsvValid0
xsvUnknown1
xsvCorrupted2
xsvSignerNotFound3
xsvFailure4
xsvReferenceCorrupted5

subjectKeyID
Data (read-only)

Default Value: ""

Contains the subject key identifier of the signing certificate.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented by a SHA-1 hash of the bit string of the subject public key.

subjectRDN
String (read-only)

Default Value: ""

Contains information about the person owning the signing certificate. Only certificates with given subject information will be enumerated during the search operation. Information is stored in the form of [Object Identifier, Value] pairs.

xmlElement
String

Default Value: ""

Specifies the XML element where to save the signature or containing the signature.

This property specifies the XML element where to save the electronic signature or that contains the signature to be validated.

Supported values are:

""an empty string indicates the Document element
"#id"indicates an XML element with specified Id
XPath expressionindicates an XML element selected using XPath expression. Use XPathNamespaces property to specify Prefixes and NamespaceURIs

For example:

"/root/data[1]" - indicates the second "data" element under the document element with a name "root"

"//ns1:data" - indicates a data element. "ns1" prefix should be defined in XPathNamespaces property

Node nameindicates an XML element selected using its NodeName.

For example: "data" - indicates an XML element with node name "data".

Constructors

public init()

Creates a new XML signature object.

Config Settings (XMLVerifier Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

XMLVerifier Config Settings

DataType:   Specifies the external data type.

Use this property to specify the type of the external data (either DataFile, DataStream or DataBytes properties) for class.

The following data types are supported:

"" or "XML"an XML document (by default).
"data"a binary data.

DetachedResourceURI:   Specifies a detached resource URI.

Specifies a URI of the provided data, usually the data filename if stored along with a detached signature.

HMACKey:   The key value for HMAC.

Use this property to set the HMAC key. The component uses base16 (hex) encoding for this configuration value.

HMACSigningUsed:   Whether HMAC signing was used.

This config property returns true if HMAC-based algorithm was used to create the signature.

IDAttributeName:   Specifies the custom name of ID attribute.

This property contains the custom name of identifier (ID) attribute. Used to identify the target XML element when reference URI has "#id_name" value or when ID attribute should be auto-generated for a target XML element.

IDAttributeNamespaceURI:   Specifies the custom namespace URI of ID attribute.

This property contains the custom namespace URI of identifier (ID) attribute. Used to identify the target XML element when reference URI has "#id_name" value or when ID attribute should be auto-generated for a target XML element.

InclusiveNamespacesPrefixList:   Specifies the InclusiveNamespaces PrefixList.

Use this property to read InclusiveNamespaces PrefixList used for exclusive canonicalization transform of SignedInfo element. See XML-Signature Syntax and Processing specification for details.

KeyName:   Identifies the key.

Contains a string value (with significant spaces) which may be used by the signer to communicate a key identifier to the recipient. Typically, KeyName contains an identifier related to the key pair used to sign the message, but it may contain other protocol-related information that indirectly identifies a key pair. Common uses of KeyName include simple string names for keys, a key index, a distinguished name (DN), an email address, etc.

ManifestCount:   The number of the manifest elements.

Returns the number of the ds:Manifest elements available.

ManifestID[Index]:   The ID of the manifest element.

This property contains the identifier (ID) attribute of the ds:Manifest element. Index value could be omitted for the first manifest.

ManifestObjectIndex[Index]:   The object element index to which the manifest element belongs.

This property contains the ds:Object element index to which the ds:Manifest element belongs. Index value could be omitted for the first signature properties.

ManifestXML[Index]:   The XML content of the manifest element.

This property contains the XML content of the ds:Manifest element. Index value could be omitted for the first manifest.

ObjectCount:   The number of the object elements.

Returns the number of the additional ds:Object elements available.

ObjectEncoding[Index]:   The Encoding of the object element.

This property contains the Encoding attribute of the ds:Object element. Index value could be omitted for the first object.

ObjectID[Index]:   The ID of the object element.

This property contains the identifier (ID) attribute of the ds:Object element. Index value could be omitted for the first object.

ObjectMimeType[Index]:   The MIME type of the object element.

This property contains the MIME type attribute of the ds:Object element. Index value could be omitted for the first object.

ObjectSignaturePropertiesCount:   The number of the signature properties elements.

Returns the number of the ds:SignatureProperties elements available.

ObjectSignaturePropertiesID[Index]:   The ID of the signature properties element.

This property contains the identifier (ID) attribute of the ds:SignatureProperties element. Index value could be omitted for the first signature properties.

ObjectSignaturePropertiesObjectIndex[Index]:   The object element index to which the signature properties element belongs.

This property contains the ds:Object element index to which the ds:SignatureProperties element belongs. Index value could be omitted for the first signature properties.

ObjectSignaturePropertiesXML[Index]:   The XML content of the signature properties element.

This property contains the XML content of the ds:SignatureProperties element. Index value could be omitted for the first signature properties.

ObjectSignaturePropertyCount:   The number of the signature property elements.

Returns the number of the ds:SignatureProperty elements available.

ObjectSignaturePropertyID[Index]:   The ID of the signature properties element.

This property contains the identifier (ID) attribute of the ds:SignatureProperty element. Index value could be omitted for the first signature property.

ObjectSignaturePropertyPropertiesIndex[Index]:   The signature properties element index to which the signature property element belongs.

This property contains the ds:SignatureProperties element index to which the ds:SignatureProperty element belongs. Index value could be omitted for the first signature property.

ObjectSignaturePropertyTarget[Index]:   The Target of the signature properties element.

This property contains the Target attribute of the ds:SignatureProperty element. Index value could be omitted for the first signature property.

ObjectSignaturePropertyXML[Index]:   The XML content of the signature property element.

This property contains the XML content of the ds:SignatureProperty element. Index value could be omitted for the first signature property.

ObjectXML[Index]:   The XML content of the object element.

This property contains the XML content of the ds:Object element. Index value could be omitted for the first object.

PSSUsed:   Whether RSASSA-PSS mode was used.

Although the RSASSA-PSS algorithm provides better security than a classic RSA scheme (PKCS#1-1.5), please take into account that RSASSA-PSS is a relatively new algorithm which may not be understood by older implementations.

SignatureCompliance:   SIgnature compliance with XMLDSig/EBICS.

Specifies whether the signature is compliant with W3C's XMLDSig, or with EBICS (Electronic Banking Internet Communication Standard).

Supported values are:

""The same as "XML-DSig".
XML-DSigThe W3C's XMLDSig-compliant signature (by default).
EBICSElectronic Banking Internet Communication Standard (EBICS) compliant signature. On signing the version is autodetected based on the document element.
EBICS_H3Electronic Banking Internet Communication Standard (EBICS) compliant signature. The version is H3.
EBICS_H4Electronic Banking Internet Communication Standard (EBICS) compliant signature. The version is H4.
EBICS_H5Electronic Banking Internet Communication Standard (EBICS) compliant signature. The version is H5.

SignatureID:   Contains the ID for Signature element.

This property contains the identifier (ID) attribute of the ds:Signature element.

TempPath:   Location where the temporary files are stored.

This setting specifies an absolute path to the location on disk where temporary files are stored.

Base Config Settings

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:

offNo caching (default)
localLocal caching
globalGlobal caching

Cookies:   Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS:   Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:

noneNo static DNS rules (default)
localLocal static DNS rules
globalGlobal static DNS rules

StaticIPAddress[domain]:   Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses:   Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag:   Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup:   Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime:   Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval:   Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver:   Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (XMLVerifier Module)

XMLVerifier Errors

1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
1048578   Class is configured incorrectly (SB_ERROR_INVALID_SETUP)
1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER) 
39845889   Input file does not exist (SB_ERROR_XML_INPUTFILE_NOT_EXISTS)
39845890   Data file does not exist (SB_ERROR_XML_DATAFILE_NOT_EXISTS)
39845891   Unsupported signature method type (SB_ERROR_XML_UNSUPPORTED_SIGNATURE_METHOD_TYPE)
39845892   Unsupported has algorithm (SB_ERROR_XML_UNSUPPORTED_HASH_ALGORITHM)
39845893   Unsupported key type (SB_ERROR_XML_UNSUPPORTED_KEY_TYPE)
39845894   Invalid key type (SB_ERROR_XML_INVALID_KEY_TYPE)
39845895   Invalid encryption method (SB_ERROR_XML_INVALID_ENCRYPTION_METHOD)
39845896   Not found (SB_ERROR_XML_NOT_FOUND)
39845897   No element ID (SB_ERROR_XML_NO_ELEMENT_ID)