XAdESSigner Module

Properties   Methods   Events   Config Settings   Errors  

The XAdESSigner module creates XAdES-compliant signature files.

Syntax

SecureBlackbox.Xadessigner

Remarks

XAdESSigner can sign XML documents in accordance with XAdES standard. Originally developed and adopted in the European Union, XAdES has quickly become a recognized international standard for signing XML documents. XAdES provides a convenient framework for creating short-lived and long-term signatures over any kind of XML documents, and is now used by governments, healthcare providers, banks, and independent service providers all across the globe.

Standards and technologies supported

XAdESSigner offers the following signing capabilities:

• Create and upgrade XAdES signatures in accordance with the most recent XAdES specification (ETSI EN 319 132). Earlier versions are also supported.
• All profiles are supported (BES, EPES, T, C, X, XL, A, including the Extended variants).
• Timestamping using external TSAs.
• All industry-standard cryptographic algorithms (RSA, ECDSA, SHA256-512, and many others).

Configuring the signature parameters

Configuring XAdESSigner to make it produce a signature of the right type is the main task you would need to perform in your code. Normally the service or software you will be communicating your XML documents to will provide you with the list of requirements that your signatures should match.

Typically, those will dictate the following key aspects of the signatures:

• The signature Form, sometimes referred to as Level (such BES, T, XL, A, or Extended-XLong). This can be adjusted with the XAdESForm property.
• Whether the signature should be detached, enveloped, or enveloping: adjust via SignatureType property.
• When creating a timestamped signature (such as T or A), provide the address of your online TSA service via TimestampServer property.
• When creating long-term signatures that include the signing chain and validation material, tune up validation parameters via RevocationCheck, OfflineMode, and IgnoreChainValidationErrors properties.

In some circumstances you will also need to adjust the following lower-level settings:

• Choose a specific XAdES version between 1.4.1, 1.3.2, 1.2.2, and 1.1.1, and assign it to XAdESVersion property.
• Specify the needed canonicalization method using the CanonicalizationMethod property.
• Provide the hash algorithm via the HashAlgorithm property.

Signing certificates

XAdESSigner can use certificates residing on different media. Besides generic certificates stored in PFX or PEM files (A1), it can operate with non-exportable certificates residing on hardware media (A3) or in the cloud.

Non-exportable certificates can be accessed transparently via a Windows CSP or a PKCS#11 driver, if supplied by the certificate issuer. Proprietary interfaces can be plugged in with the external signing feature (see below).

You can use CertificateManager and CertificateStorage components to access the signing certificate. Assign the certificate to SigningCertificate property, and optionally provide the remainder of its chain via SigningChain property.

Note: If signing with a non-exportable key (such as residing on a hardware device or in the cloud), please make sure you keep the original CertificateStorage object open until the signing is completed. This is because the storage component provides a 'bridge' to the private key. If the storage is closed prematurely, this bridge is destroyed, and the private key can't be used.

You don't need to provide a signing certificate or chain when timestamping and upgrading signatures, since this type of operation does not involve the signing private key.

Signing the document

Now that you have set up all signature properties and attached the signing certificate, it is time to proceed to signing. You can provide the input document in one of the following forms: as a file (assign the path to InputFile property), as a stream (assign to InputStream property), or as a byte array (assign to InputBytes). Similarly, the output can be collected in one of the same forms, either by passing the destination path or stream via OutputFile and OutputStream respectively, or by reading the resulting document bytes from the OutputBytes property after the signing completes.

Having set up the input and output (unless using OutputBytes, which should be read later), call the component's Sign method. This will initiate the signing process. Depending on the settings, the signing may be as straightforward as calculating the document hash and signing it with the private key (e.g. in XAdES-BES variant), or it may involve advanced chain validation routines (XAdES-XL or -A). During the latter the component may contact a number of external revocation information sources (CRL and OCSP servers) to establish the validity of the signing certificate.

If a TSA server was provided via the TimestampServer property, the component will contact it too to timestamp the new signature.

During the signing XAdESSigner may fire events to let your code know of certain conditions. It may fire TLSCertValidate if one of the HTTP endpoints involved in the operation (which may be a CRL, OCSP, or TSA service) works over TLS and needs its certificate to be validated. It may also fire FormatElement and FormatText to let your code apply custom formatting to XML document elements. If XAdESSigner fails to resolve one of the references in the signature, it will fire ResolveReference to let your code help with resolving it.

When the signing operation completes, the output file, stream, or byte array will contain the signature of the requested kind. Note that while nveloped and enveloping signatures contain the signed content within them, detached signatures assume that you supply the original content separately.

Apart from signing, XAdESSigner can perform operations on signatures of other kinds. Use Upgrade method to upgrade an existing XAdES signature to a higher level (e.g. BES to XL). Use Timestamp to add a generic or validation timestamp to an existing signature.

External signing and DCAuth

XAdESSigner, like many other components offered by the product, supports two methods of signing with external keys. These methods are fully independent of each other: you can choose the one that suits your usage scenario best.

Synchronous method: ExternalSign

This is a simpler method that basically lets you infiltrate into the heart of the signing routine by taking care of the hash signing operation. The component does the rest of the job (hash calculation, preparation of signature objects, CRL/OCSP retrieval).

To initiate this method, call SignExternal instead of Sign. When the hash is ready, it will be passed back to your code with ExternalSign event. Your event handler needs to sign the hash with the private key and return the created signature back to the component - which will embed it into the document.

You don't need your signing certificate to contain an associated private key when using this method. The certificate itself (its public copy) may be needed though, as it is often included in the hash calculation.

This method is synchronous, meaning SignExternal provides you the results immediately upon its completion.

Asynchronous method: DCAuth

DCAuth is a SecureBlackbox-own know-how technology. This protocol was designed to allow sharing of private keys across environments, allowing the signer and the private key to reside on different systems. It works in the following way:

• The signing party - such as XAdESSigner - initiates the operation using SignAsyncBegin call. This produces two outcomes: a pre-signed document (a document with a blank signature placeholder), and a request state (an object containing a hash that needs to be signed). At this point the XAdESSigner instance can be released, and the process itself terminated (which may be useful when run as part of a web page).
• The request state is passed to the private key holder party. The private key holder passes the request state to a DCAuth object, which parses the request state, extracts the hash, and signs it. The output of DCAuth processing is another object, response state, which contains the signature. The private key holder then sends the response state back to the signing party.
• The signing party re-creates the controls, and passes the response state, together with the pre-signed version of the document, to the signer's SignAsyncEnd method. SignAsyncEnd extracts the signature from the response state and incorporates it into the pre-signed document.

This method is asynchronous in that sense that, from the signing party's viewpoint, it splits the signing operation into the pre-signing and completion stages which can be performed independently from each other and in different execution contexts. This makes this method particularly helpful for use in web pages and other scenarios where the signing key is not available in real time.

Fine-grained chain validation setup

Chain validation is a sophisticated, multi-faceted procedure that involves a lot of variables. Depending on the configuration of your operating environment, the specifics of the PKI framework being used, and the validation policy you need to follow, you may want to tune up your chain validation parameters so they fit them best. A summary of such parameters is given below.

• RevocationCheck lets you choose between and/or prioritize revocation origins. OCSP sources are often preferred to CRL because of their real-time capability and the smaller size of validation tokens they produce.
• OfflineMode is a master switch that stops the class from looking for any validation tokens online. If this property is switched on, the class will only use the KnownCertificates, TrustedCertificates, KnownCRLs, and KnownOCSPs collections to look for the missing validation material.
• IgnoreChainValidationErrors makes the class ignore any major validation issues it encounters (such us an untrusted chain or missing CRL). This option is handy for debugging and for creating signatures in the environments where the signing certificate is not trusted.
• KnownCertificates, KnownCRLs, and KnownOCSPs let you provide your own validation material. This may be useful when working in OfflineMode, where the signer has no access to the validation sources, or where the validation material has already been collected.
• TrustedCertificates lets you provide a list of trust anchors, either as a complement to the system's or as an alternative to it.
• BlockedCertificates lets you provide a list of blocked/distrusted certificates. Any CA certificate contained in it will be deemed untrusted/invalid.

The following parameters are not directly related to chain validation, but may have an implicit effect on it.

• Proxy, SocketSettings, and TLSSettings let you tune up the connectivity and TLS options in accordance with local preferences.
• TLSClientChain lets you provide the client certificate and its chain for TLS client authentication.
• Subscribe to TLSCertValidate to validate any TLS certificates of the services involved in chain validation.

The results of the chain validation procedure, upon its completion, are published in the following properties:

• ChainValidationResult contains the primary result of the chain validation routine: valid, valid but untrusted, invalid, or undefined.
• ChainValidationDetails provides the details of the factors that contributed to the chain validation result, such as an outdated certificate, a missing CRL, or a missing CA certificate.
• ValidationLog contains the detailed chain validation log. The log can often be very helpful in nailing down various validation issues.

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.

AutoValidateSignatures Property (XAdESSigner Module)

Specifies whether module should validate any present signatures when the document is opened.

Syntax

• Swift
• Objective-C

public var autoValidateSignatures: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=autoValidateSignatures,setter=setAutoValidateSignatures:) BOOL autoValidateSignatures;

- (BOOL)autoValidateSignatures;
- (void)setAutoValidateSignatures :(BOOL)newAutoValidateSignatures;

Default Value

False

Remarks

This setting is switched off by default to speed up document processing. Even if the document is loaded with this property set to false, you can validate the signatures manually on a later stage using the Revalidate method.

BlockedCertificates Property (XAdESSigner Module)

The certificates that must be rejected as trust anchors.

Syntax

• Swift
• Objective-C

public var blockedCertificates: Array<Certificate> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=blockedCertCount,setter=setBlockedCertCount:) int blockedCertCount;

- (int)blockedCertCount;
- (void)setBlockedCertCount :(int)newBlockedCertCount;

- (NSData*)blockedCertBytes:(int)blockedCertIndex;

- (long long)blockedCertHandle:(int)blockedCertIndex;
- (void)setBlockedCertHandle:(int)blockedCertIndex :(long long)newBlockedCertHandle;

Default Value

""

Remarks

Use this property to provide a list of compromised or blocked certificates. Any chain containing a blocked certificate will fail validation.

CRLs Property (XAdESSigner Module)

A collection of certificate revocation lists embedded into the signature by the signer.

Syntax

• Swift
• Objective-C

public var crLs: Array<CRL> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=CRLCount) int CRLCount;

- (int)CRLCount;

- (NSData*)CRLBytes:(int)cRLIndex;

- (long long)CRLHandle:(int)cRLIndex;

- (NSString*)CRLIssuer:(int)cRLIndex;

- (NSString*)CRLIssuerRDN:(int)cRLIndex;

- (NSString*)CRLLocation:(int)cRLIndex;

- (NSString*)CRLNextUpdate:(int)cRLIndex;

- (NSString*)CRLThisUpdate:(int)cRLIndex;

Default Value

""

Remarks

Use this property to access the CRLs embedded into the signature by the signer.

DataBytes Property (XAdESSigner Module)

Use this property to pass the external data to module in the byte array form.

Syntax

• Swift
• Objective-C

public var dataBytes: Data {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=dataBytes,setter=setDataBytes:) NSData* dataBytes;

- (NSData*)dataBytes;
- (void)setDataBytes :(NSData*)newDataBytes;

Remarks

Assign a byte array containing the external data to be processed to this property.

DataFile Property (XAdESSigner Module)

A file containing the external data covered by a detached signature.

Syntax

• Swift
• Objective-C

public var dataFile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=dataFile,setter=setDataFile:) NSString* dataFile;

- (NSString*)dataFile;
- (void)setDataFile :(NSString*)newDataFile;

Default Value

""

Remarks

In the case of a detached signature, use this property to provide the external data to the class from a file. Alternatively, provide the data via DataStream.

DataType Property (XAdESSigner Module)

Specifies the external data type.

Syntax

• Swift
• Objective-C

public var dataType: XadessignerDataTypes {
  get {...}
  set {...}
}

public enum XadessignerDataTypes: Int32 {
  case cxdtXML = 0
  case cxdtBinary = 1
  case cxdtBase64 = 2
}

@property (nonatomic,readwrite,assign,getter=dataType,setter=setDataType:) int dataType;

- (int)dataType;
- (void)setDataType :(int)newDataType;

Default Value

0

Remarks

Use this property to specify the type of the external data (either DataFile, DataStream or DataBytes properties) for class.

DataURI Property (XAdESSigner Module)

Specifies a detached data resource URI.

Syntax

• Swift
• Objective-C

public var dataURI: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=dataURI,setter=setDataURI:) NSString* dataURI;

- (NSString*)dataURI;
- (void)setDataURI :(NSString*)newDataURI;

Default Value

""

Remarks

Specifies a URI used for data being signed, usually the data filename if stored along with a detached signature.

Encoding Property (XAdESSigner Module)

Specifies XML encoding.

Syntax

• Swift
• Objective-C

public var encoding: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=encoding,setter=setEncoding:) NSString* encoding;

- (NSString*)encoding;
- (void)setEncoding :(NSString*)newEncoding;

Default Value

""

Remarks

Use this property to specify the encoding to apply to the XML documents.

ExternalCrypto Property (XAdESSigner Module)

Provides access to external signing and DC parameters.

Syntax

• Swift
• Objective-C

public var externalCrypto: ExternalCrypto {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=externalCryptoAsyncDocumentID,setter=setExternalCryptoAsyncDocumentID:) NSString* externalCryptoAsyncDocumentID;

- (NSString*)externalCryptoAsyncDocumentID;
- (void)setExternalCryptoAsyncDocumentID :(NSString*)newExternalCryptoAsyncDocumentID;

@property (nonatomic,readwrite,assign,getter=externalCryptoCustomParams,setter=setExternalCryptoCustomParams:) NSString* externalCryptoCustomParams;

- (NSString*)externalCryptoCustomParams;
- (void)setExternalCryptoCustomParams :(NSString*)newExternalCryptoCustomParams;

@property (nonatomic,readwrite,assign,getter=externalCryptoData,setter=setExternalCryptoData:) NSString* externalCryptoData;

- (NSString*)externalCryptoData;
- (void)setExternalCryptoData :(NSString*)newExternalCryptoData;

@property (nonatomic,readwrite,assign,getter=externalCryptoExternalHashCalculation,setter=setExternalCryptoExternalHashCalculation:) BOOL externalCryptoExternalHashCalculation;

- (BOOL)externalCryptoExternalHashCalculation;
- (void)setExternalCryptoExternalHashCalculation :(BOOL)newExternalCryptoExternalHashCalculation;

@property (nonatomic,readwrite,assign,getter=externalCryptoHashAlgorithm,setter=setExternalCryptoHashAlgorithm:) NSString* externalCryptoHashAlgorithm;

- (NSString*)externalCryptoHashAlgorithm;
- (void)setExternalCryptoHashAlgorithm :(NSString*)newExternalCryptoHashAlgorithm;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeyID,setter=setExternalCryptoKeyID:) NSString* externalCryptoKeyID;

- (NSString*)externalCryptoKeyID;
- (void)setExternalCryptoKeyID :(NSString*)newExternalCryptoKeyID;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeySecret,setter=setExternalCryptoKeySecret:) NSString* externalCryptoKeySecret;

- (NSString*)externalCryptoKeySecret;
- (void)setExternalCryptoKeySecret :(NSString*)newExternalCryptoKeySecret;

@property (nonatomic,readwrite,assign,getter=externalCryptoMethod,setter=setExternalCryptoMethod:) int externalCryptoMethod;

- (int)externalCryptoMethod;
- (void)setExternalCryptoMethod :(int)newExternalCryptoMethod;

@property (nonatomic,readwrite,assign,getter=externalCryptoMode,setter=setExternalCryptoMode:) int externalCryptoMode;

- (int)externalCryptoMode;
- (void)setExternalCryptoMode :(int)newExternalCryptoMode;

@property (nonatomic,readwrite,assign,getter=externalCryptoPublicKeyAlgorithm,setter=setExternalCryptoPublicKeyAlgorithm:) NSString* externalCryptoPublicKeyAlgorithm;

- (NSString*)externalCryptoPublicKeyAlgorithm;
- (void)setExternalCryptoPublicKeyAlgorithm :(NSString*)newExternalCryptoPublicKeyAlgorithm;

 

Default Value

""

Remarks

Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on the ExternalSign event) and asynchronous (based on the DC protocol and the DCAuth signing component).

FIPSMode Property (XAdESSigner Module)

Reserved.

Syntax

• Swift
• Objective-C

public var fipsMode: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=FIPSMode,setter=setFIPSMode:) BOOL FIPSMode;

- (BOOL)FIPSMode;
- (void)setFIPSMode :(BOOL)newFIPSMode;

Default Value

False

Remarks

This property is reserved for future use.

IgnoreChainValidationErrors Property (XAdESSigner Module)

Makes the module tolerant to chain validation errors.

Syntax

• Swift
• Objective-C

public var ignoreChainValidationErrors: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=ignoreChainValidationErrors,setter=setIgnoreChainValidationErrors:) BOOL ignoreChainValidationErrors;

- (BOOL)ignoreChainValidationErrors;
- (void)setIgnoreChainValidationErrors :(BOOL)newIgnoreChainValidationErrors;

Default Value

False

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

InputBytes Property (XAdESSigner Module)

Use this property to pass the input to module in byte array form.

Syntax

• Swift
• Objective-C

public var inputBytes: Data {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=inputBytes,setter=setInputBytes:) NSData* inputBytes;

- (NSData*)inputBytes;
- (void)setInputBytes :(NSData*)newInputBytes;

Remarks

Assign a byte array containing the data to be processed to this property.

InputFile Property (XAdESSigner Module)

The XML document to sign.

Syntax

• Swift
• Objective-C

public var inputFile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=inputFile,setter=setInputFile:) NSString* inputFile;

- (NSString*)inputFile;
- (void)setInputFile :(NSString*)newInputFile;

Default Value

""

Remarks

Provide a path to the XML file to sign.

KnownCertificates Property (XAdESSigner Module)

Additional certificates for chain validation.

Syntax

• Swift
• Objective-C

public var knownCertificates: Array<Certificate> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=knownCertCount,setter=setKnownCertCount:) int knownCertCount;

- (int)knownCertCount;
- (void)setKnownCertCount :(int)newKnownCertCount;

- (NSData*)knownCertBytes:(int)knownCertIndex;

- (long long)knownCertHandle:(int)knownCertIndex;
- (void)setKnownCertHandle:(int)knownCertIndex :(long long)newKnownCertHandle;

Default Value

""

Remarks

Use this property to supply a list of additional certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when intermediary CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the class manually.

The purpose of the certificates to be added to this collection is roughly equivalent to that of the Intermediate Certification Authorities system store in Windows.

Do not add trust anchors or root certificates to this collection: add them to TrustedCertificates instead.

KnownCRLs Property (XAdESSigner Module)

Additional CRLs for chain validation.

Syntax

• Swift
• Objective-C

public var knownCRLs: Array<CRL> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=knownCRLCount,setter=setKnownCRLCount:) int knownCRLCount;

- (int)knownCRLCount;
- (void)setKnownCRLCount :(int)newKnownCRLCount;

- (NSData*)knownCRLBytes:(int)knownCRLIndex;

- (long long)knownCRLHandle:(int)knownCRLIndex;
- (void)setKnownCRLHandle:(int)knownCRLIndex :(long long)newKnownCRLHandle;

Default Value

""

Remarks

Use this property to supply additional CRLs that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated CRLs are stored separately from the signed message or document.

KnownOCSPs Property (XAdESSigner Module)

Additional OCSP responses for chain validation.

Syntax

• Swift
• Objective-C

public var knownOCSPs: Array<OCSPResponse> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=knownOCSPCount,setter=setKnownOCSPCount:) int knownOCSPCount;

- (int)knownOCSPCount;
- (void)setKnownOCSPCount :(int)newKnownOCSPCount;

- (NSData*)knownOCSPBytes:(int)knownOCSPIndex;

- (long long)knownOCSPHandle:(int)knownOCSPIndex;
- (void)setKnownOCSPHandle:(int)knownOCSPIndex :(long long)newKnownOCSPHandle;

Default Value

""

Remarks

Use this property to supply additional OCSP responses that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated OCSP responses are stored separately from the signed message or document.

NewSignature Property (XAdESSigner Module)

Provides access to new signature properties.

Syntax

• Swift
• Objective-C

public var newSignature: XAdESSignature {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=newSigCanonicalizationMethod,setter=setNewSigCanonicalizationMethod:) int newSigCanonicalizationMethod;

- (int)newSigCanonicalizationMethod;
- (void)setNewSigCanonicalizationMethod :(int)newNewSigCanonicalizationMethod;

@property (nonatomic,readonly,assign,getter=newSigCertificateIndex) int newSigCertificateIndex;

- (int)newSigCertificateIndex;

@property (nonatomic,readonly,assign,getter=newSigChainValidationDetails) int newSigChainValidationDetails;

- (int)newSigChainValidationDetails;

@property (nonatomic,readonly,assign,getter=newSigChainValidationResult) int newSigChainValidationResult;

- (int)newSigChainValidationResult;

@property (nonatomic,readwrite,assign,getter=newSigClaimedSigningTime,setter=setNewSigClaimedSigningTime:) NSString* newSigClaimedSigningTime;

- (NSString*)newSigClaimedSigningTime;
- (void)setNewSigClaimedSigningTime :(NSString*)newNewSigClaimedSigningTime;

@property (nonatomic,readwrite,assign,getter=newSigHandle,setter=setNewSigHandle:) long long newSigHandle;

- (long long)newSigHandle;
- (void)setNewSigHandle :(long long)newNewSigHandle;

@property (nonatomic,readwrite,assign,getter=newSigHashAlgorithm,setter=setNewSigHashAlgorithm:) NSString* newSigHashAlgorithm;

- (NSString*)newSigHashAlgorithm;
- (void)setNewSigHashAlgorithm :(NSString*)newNewSigHashAlgorithm;

@property (nonatomic,readonly,assign,getter=newSigIssuerRDN) NSString* newSigIssuerRDN;

- (NSString*)newSigIssuerRDN;

@property (nonatomic,readonly,assign,getter=newSigLastArchivalTime) NSString* newSigLastArchivalTime;

- (NSString*)newSigLastArchivalTime;

@property (nonatomic,readwrite,assign,getter=newSigPolicyHash,setter=setNewSigPolicyHash:) NSString* newSigPolicyHash;

- (NSString*)newSigPolicyHash;
- (void)setNewSigPolicyHash :(NSString*)newNewSigPolicyHash;

@property (nonatomic,readwrite,assign,getter=newSigPolicyHashAlgorithm,setter=setNewSigPolicyHashAlgorithm:) NSString* newSigPolicyHashAlgorithm;

- (NSString*)newSigPolicyHashAlgorithm;
- (void)setNewSigPolicyHashAlgorithm :(NSString*)newNewSigPolicyHashAlgorithm;

@property (nonatomic,readwrite,assign,getter=newSigPolicyID,setter=setNewSigPolicyID:) NSString* newSigPolicyID;

- (NSString*)newSigPolicyID;
- (void)setNewSigPolicyID :(NSString*)newNewSigPolicyID;

@property (nonatomic,readwrite,assign,getter=newSigPolicyURI,setter=setNewSigPolicyURI:) NSString* newSigPolicyURI;

- (NSString*)newSigPolicyURI;
- (void)setNewSigPolicyURI :(NSString*)newNewSigPolicyURI;

@property (nonatomic,readonly,assign,getter=newSigSerialNumber) NSData* newSigSerialNumber;

- (NSData*)newSigSerialNumber;

@property (nonatomic,readonly,assign,getter=newSigSignatureBytes) NSData* newSigSignatureBytes;

- (NSData*)newSigSignatureBytes;

@property (nonatomic,readwrite,assign,getter=newSigSignatureType,setter=setNewSigSignatureType:) int newSigSignatureType;

- (int)newSigSignatureType;
- (void)setNewSigSignatureType :(int)newNewSigSignatureType;

@property (nonatomic,readonly,assign,getter=newSigSignatureValidationResult) int newSigSignatureValidationResult;

- (int)newSigSignatureValidationResult;

@property (nonatomic,readonly,assign,getter=newSigSubjectKeyID) NSData* newSigSubjectKeyID;

- (NSData*)newSigSubjectKeyID;

@property (nonatomic,readonly,assign,getter=newSigSubjectRDN) NSString* newSigSubjectRDN;

- (NSString*)newSigSubjectRDN;

@property (nonatomic,readonly,assign,getter=newSigTimestamped) BOOL newSigTimestamped;

- (BOOL)newSigTimestamped;

@property (nonatomic,readonly,assign,getter=newSigValidatedSigningTime) NSString* newSigValidatedSigningTime;

- (NSString*)newSigValidatedSigningTime;

@property (nonatomic,readonly,assign,getter=newSigValidationLog) NSString* newSigValidationLog;

- (NSString*)newSigValidationLog;

@property (nonatomic,readwrite,assign,getter=newSigXAdES,setter=setNewSigXAdES:) BOOL newSigXAdES;

- (BOOL)newSigXAdES;
- (void)setNewSigXAdES :(BOOL)newNewSigXAdES;

@property (nonatomic,readwrite,assign,getter=newSigXAdESForm,setter=setNewSigXAdESForm:) int newSigXAdESForm;

- (int)newSigXAdESForm;
- (void)setNewSigXAdESForm :(int)newNewSigXAdESForm;

@property (nonatomic,readwrite,assign,getter=newSigXAdESVersion,setter=setNewSigXAdESVersion:) int newSigXAdESVersion;

- (int)newSigXAdESVersion;
- (void)setNewSigXAdESVersion :(int)newNewSigXAdESVersion;

@property (nonatomic,readwrite,assign,getter=newSigXMLElement,setter=setNewSigXMLElement:) NSString* newSigXMLElement;

- (NSString*)newSigXMLElement;
- (void)setNewSigXMLElement :(NSString*)newNewSigXMLElement;

 

Default Value

""

Remarks

Use this property to tune-up signature properties.

OCSPs Property (XAdESSigner Module)

A collection of OCSP responses embedded into the signature.

Syntax

• Swift
• Objective-C

public var ocsPs: Array<OCSPResponse> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=OCSPCount) int OCSPCount;

- (int)OCSPCount;

- (NSData*)OCSPBytes:(int)oCSPIndex;

- (long long)OCSPHandle:(int)oCSPIndex;

- (NSString*)OCSPIssuer:(int)oCSPIndex;

- (NSString*)OCSPIssuerRDN:(int)oCSPIndex;

- (NSString*)OCSPLocation:(int)oCSPIndex;

- (NSString*)OCSPProducedAt:(int)oCSPIndex;

Default Value

""

Remarks

Use this property to access the OCSP responses embedded into the signature by its creator.

OfflineMode Property (XAdESSigner Module)

Switches the module to offline mode.

Syntax

• Swift
• Objective-C

public var offlineMode: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=offlineMode,setter=setOfflineMode:) BOOL offlineMode;

- (BOOL)offlineMode;
- (void)setOfflineMode :(BOOL)newOfflineMode;

Default Value

False

Remarks

When working in offline mode, the class restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

OutputBytes Property (XAdESSigner Module)

Use this property to read the output the module object has produced.

Syntax

• Swift
• Objective-C

public var outputBytes: Data {
  get {...}
}

@property (nonatomic,readonly,assign,getter=outputBytes) NSData* outputBytes;

- (NSData*)outputBytes;

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.

This property is read-only.

OutputFile Property (XAdESSigner Module)

Specifies the file where the signed document will be saved.

Syntax

• Swift
• Objective-C

public var outputFile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=outputFile,setter=setOutputFile:) NSString* outputFile;

- (NSString*)outputFile;
- (void)setOutputFile :(NSString*)newOutputFile;

Default Value

""

Remarks

Provide the full path to the file where the signed document should be saved.

Profile Property (XAdESSigner Module)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

• Swift
• Objective-C

public var profile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=profile,setter=setProfile:) NSString* profile;

- (NSString*)profile;
- (void)setProfile :(NSString*)newProfile;

Default Value

""

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Supported profiles:

"ES.Factura" profile equivalent to the following settings: using (XMLReference Ref = new XMLReference()) { Ref.ID = "Reference-1"; Ref.TargetXMLElement = ""; Ref.UseEnvelopedSignatureTransform = true; XAdESSigner.References.Add(Ref); } using (XMLReference Ref = new XMLReference()) { Ref.URI = "#KeyInfo-1"; XAdESSigner.References.Add(Ref); } XAdESSigner.NewSignature.XAdESVersion = XAdESVersions.xav132; XAdESSigner.NewSignature.XAdESForm = XAdESForms.xafEPES; XAdESSigner.Config("KeyInfoDetails=certificate"); XAdESSigner.Config("KeyInfoID=KeyInfo-1"); XAdESSigner.Config("ClaimedRoleText=emisor"); XAdESSigner.Config("SigPolicyId=http://www.facturae.es/politica_de_firma_formato_facturae/politica_de_firma_formato_facturae_v3_1.pdf"); XAdESSigner.Config("SigPolicyDescription=Pol" + "\u00ED" + "tica de Firma FacturaE v3.1"); XAdESSigner.Config("SigPolicyHash=3a18b197aba90fa6aff0dee912f0c006110bea13"); XAdESSigner.Config("SigPolicyHashAlgorithm=SHA1"); XAdESSigner.Config("DataObjectFormatObjectReference=#Reference-1"); XAdESSigner.Config("DataObjectFormatMimeType=text/xml"); XAdESSigner.Config("DataObjectFormatDescription=Factura electr" + "\u00F3" + "nica");

"XAdES.BASELINE-B" profile equivalent to the following settings: using (XMLReference Ref = new XMLReference()) { Ref.ID = "Reference-1"; Ref.TargetXMLElement = ""; Ref.UseEnvelopedSignatureTransform = true; XAdESSigner.References.Add(Ref); } XAdESSigner.NewSignature.XAdESVersion = XAdESVersions.xav141; XAdESSigner.NewSignature.XAdESForm = XAdESForms.xafBES; XAdESSigner.Config("DataObjectFormatObjectReference=#Reference-1"); XAdESSigner.Config("DataObjectFormatMimeType=text/xml");

"XAdES.BASELINE-T" profile extends "XAdES.BASELINE-B" profile with the following settings: XAdESSigner.NewSignature.XAdESForm = XAdESForms.xafT; XAdESSigner.TimestampServer = "https://freetsa.org/tsr";

"XAdES.BASELINE-LT" profile extends "XAdES.BASELINE-T" profile with the following settings: XAdESSigner.NewSignature.XAdESForm = XAdESForms.xafXL; XAdESSigner.Config("RefsTimestampType=none"); XAdESSigner.Config("ValidationDataRefsDetails=none");

"XAdES.BASELINE-LTA" profile extends "XAdES.BASELINE-LT" profile with the following settings: XAdESSigner.XAdESForm = XadessignerXAdESForms.xafA;

"XAdES.BASELINE-E-B" profile equivalent to the following settings: using (XMLReference Ref = new XMLReference()) { Ref.ID = "Reference-1"; Ref.TargetXMLElement = ""; Ref.UseEnvelopedSignatureTransform = true; XAdESSigner.References.Add(Ref); } XAdESSigner.NewSignature.XAdESVersion = XAdESVersions.xav141; XAdESSigner.NewSignature.XAdESForm = XAdESForms.xafExtendedBES; XAdESSigner.Config("DataObjectFormatObjectReference=#Reference-1"); XAdESSigner.Config("DataObjectFormatMimeType=text/xml");

"XAdES.BASELINE-E-T" profile extends "XAdES.BASELINE-E-B" profile with the following settings: XAdESSigner.NewSignature.XAdESForm = XAdESForms.xafExtendedT; XAdESSigner.TimestampServer = "https://freetsa.org/tsr";

"XAdES.BASELINE-E-LT" profile extends "XAdES.BASELINE-E-T" profile with the following settings: XAdESSigner.NewSignature.XAdESForm = XAdESForms.xafExtendedXL; XAdESSigner.Config("RefsTimestampType=none"); XAdESSigner.Config("ValidationDataRefsDetails=none");

"XAdES.BASELINE-E-LTA" profile extends "XAdES.BASELINE-E-LT" profile with the following settings: XAdESSigner.NewSignature.XAdESForm = XAdESForms.xafExtendedA;

"XAdES.CounterSignature" profile allows to add XAdES countersignature to the existent XAdES-BES or EPES signature. Use XMLElement property to specify existent XAdES signature. Sample code: XAdESSigner.Profile = "XAdES.CounterSignature"; XAdESSigner.NewSignature.XAdES = false;

Proxy Property (XAdESSigner Module)

The proxy server settings.

Syntax

• Swift
• Objective-C

public var proxy: ProxySettings {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=proxyAddress,setter=setProxyAddress:) NSString* proxyAddress;

- (NSString*)proxyAddress;
- (void)setProxyAddress :(NSString*)newProxyAddress;

@property (nonatomic,readwrite,assign,getter=proxyAuthentication,setter=setProxyAuthentication:) int proxyAuthentication;

- (int)proxyAuthentication;
- (void)setProxyAuthentication :(int)newProxyAuthentication;

@property (nonatomic,readwrite,assign,getter=proxyPassword,setter=setProxyPassword:) NSString* proxyPassword;

- (NSString*)proxyPassword;
- (void)setProxyPassword :(NSString*)newProxyPassword;

@property (nonatomic,readwrite,assign,getter=proxyPort,setter=setProxyPort:) int proxyPort;

- (int)proxyPort;
- (void)setProxyPort :(int)newProxyPort;

@property (nonatomic,readwrite,assign,getter=proxyProxyType,setter=setProxyProxyType:) int proxyProxyType;

- (int)proxyProxyType;
- (void)setProxyProxyType :(int)newProxyProxyType;

@property (nonatomic,readwrite,assign,getter=proxyRequestHeaders,setter=setProxyRequestHeaders:) NSString* proxyRequestHeaders;

- (NSString*)proxyRequestHeaders;
- (void)setProxyRequestHeaders :(NSString*)newProxyRequestHeaders;

@property (nonatomic,readwrite,assign,getter=proxyResponseBody,setter=setProxyResponseBody:) NSString* proxyResponseBody;

- (NSString*)proxyResponseBody;
- (void)setProxyResponseBody :(NSString*)newProxyResponseBody;

@property (nonatomic,readwrite,assign,getter=proxyResponseHeaders,setter=setProxyResponseHeaders:) NSString* proxyResponseHeaders;

- (NSString*)proxyResponseHeaders;
- (void)setProxyResponseHeaders :(NSString*)newProxyResponseHeaders;

@property (nonatomic,readwrite,assign,getter=proxyUseIPv6,setter=setProxyUseIPv6:) BOOL proxyUseIPv6;

- (BOOL)proxyUseIPv6;
- (void)setProxyUseIPv6 :(BOOL)newProxyUseIPv6;

@property (nonatomic,readwrite,assign,getter=proxyUseProxy,setter=setProxyUseProxy:) BOOL proxyUseProxy;

- (BOOL)proxyUseProxy;
- (void)setProxyUseProxy :(BOOL)newProxyUseProxy;

@property (nonatomic,readwrite,assign,getter=proxyUsername,setter=setProxyUsername:) NSString* proxyUsername;

- (NSString*)proxyUsername;
- (void)setProxyUsername :(NSString*)newProxyUsername;

 

Default Value

""

Remarks

Use this property to tune up the proxy server settings.

References Property (XAdESSigner Module)

A list of references to the data to be signed.

Syntax

• Swift
• Objective-C

public var references: Array<XMLReference> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=referenceCount,setter=setReferenceCount:) int referenceCount;

- (int)referenceCount;
- (void)setReferenceCount :(int)newReferenceCount;

- (BOOL)referenceAutoGenerateElementId:(int)referenceIndex;
- (void)setReferenceAutoGenerateElementId:(int)referenceIndex :(BOOL)newReferenceAutoGenerateElementId;

- (int)referenceCanonicalizationMethod:(int)referenceIndex;
- (void)setReferenceCanonicalizationMethod:(int)referenceIndex :(int)newReferenceCanonicalizationMethod;

- (NSString*)referenceCustomElementId:(int)referenceIndex;
- (void)setReferenceCustomElementId:(int)referenceIndex :(NSString*)newReferenceCustomElementId;

- (NSData*)referenceDigestValue:(int)referenceIndex;
- (void)setReferenceDigestValue:(int)referenceIndex :(NSData*)newReferenceDigestValue;

- (long long)referenceHandle:(int)referenceIndex;
- (void)setReferenceHandle:(int)referenceIndex :(long long)newReferenceHandle;

- (NSString*)referenceHashAlgorithm:(int)referenceIndex;
- (void)setReferenceHashAlgorithm:(int)referenceIndex :(NSString*)newReferenceHashAlgorithm;

- (BOOL)referenceHasURI:(int)referenceIndex;
- (void)setReferenceHasURI:(int)referenceIndex :(BOOL)newReferenceHasURI;

- (NSString*)referenceID:(int)referenceIndex;
- (void)setReferenceID:(int)referenceIndex :(NSString*)newReferenceID;

- (NSString*)referenceInclusiveNamespacesPrefixList:(int)referenceIndex;
- (void)setReferenceInclusiveNamespacesPrefixList:(int)referenceIndex :(NSString*)newReferenceInclusiveNamespacesPrefixList;

- (NSString*)referenceReferenceType:(int)referenceIndex;
- (void)setReferenceReferenceType:(int)referenceIndex :(NSString*)newReferenceReferenceType;

- (int)referenceSignatureIndex:(int)referenceIndex;

- (NSData*)referenceTargetData:(int)referenceIndex;
- (void)setReferenceTargetData:(int)referenceIndex :(NSData*)newReferenceTargetData;

- (int)referenceTargetType:(int)referenceIndex;
- (void)setReferenceTargetType:(int)referenceIndex :(int)newReferenceTargetType;

- (NSString*)referenceTargetXMLElement:(int)referenceIndex;
- (void)setReferenceTargetXMLElement:(int)referenceIndex :(NSString*)newReferenceTargetXMLElement;

- (NSString*)referenceURI:(int)referenceIndex;
- (void)setReferenceURI:(int)referenceIndex :(NSString*)newReferenceURI;

- (BOOL)referenceUseBase64Transform:(int)referenceIndex;
- (void)setReferenceUseBase64Transform:(int)referenceIndex :(BOOL)newReferenceUseBase64Transform;

- (BOOL)referenceUseEnvelopedSignatureTransform:(int)referenceIndex;
- (void)setReferenceUseEnvelopedSignatureTransform:(int)referenceIndex :(BOOL)newReferenceUseEnvelopedSignatureTransform;

- (BOOL)referenceUseXPathFilter2Transform:(int)referenceIndex;
- (void)setReferenceUseXPathFilter2Transform:(int)referenceIndex :(BOOL)newReferenceUseXPathFilter2Transform;

- (BOOL)referenceUseXPathTransform:(int)referenceIndex;
- (void)setReferenceUseXPathTransform:(int)referenceIndex :(BOOL)newReferenceUseXPathTransform;

- (NSString*)referenceXPathExpression:(int)referenceIndex;
- (void)setReferenceXPathExpression:(int)referenceIndex :(NSString*)newReferenceXPathExpression;

- (NSString*)referenceXPathFilter2Expressions:(int)referenceIndex;
- (void)setReferenceXPathFilter2Expressions:(int)referenceIndex :(NSString*)newReferenceXPathFilter2Expressions;

- (NSString*)referenceXPathFilter2Filters:(int)referenceIndex;
- (void)setReferenceXPathFilter2Filters:(int)referenceIndex :(NSString*)newReferenceXPathFilter2Filters;

- (NSString*)referenceXPathFilter2PrefixList:(int)referenceIndex;
- (void)setReferenceXPathFilter2PrefixList:(int)referenceIndex :(NSString*)newReferenceXPathFilter2PrefixList;

- (NSString*)referenceXPathPrefixList:(int)referenceIndex;
- (void)setReferenceXPathPrefixList:(int)referenceIndex :(NSString*)newReferenceXPathPrefixList;

Default Value

""

Remarks

Electronic signature is computed over a set of data pieces. Each piece of data to be signed is specified by a reference.

RevocationCheck Property (XAdESSigner Module)

Specifies the kind(s) of revocation check to perform for all chain certificates.

Syntax

• Swift
• Objective-C

public var revocationCheck: XadessignerRevocationChecks {
  get {...}
  set {...}
}

public enum XadessignerRevocationChecks: Int32 {
  case crcNone = 0
  case crcAuto = 1
  case crcAllCRL = 2
  case crcAllOCSP = 3
  case crcAllCRLAndOCSP = 4
  case crcAnyCRL = 5
  case crcAnyOCSP = 6
  case crcAnyCRLOrOCSP = 7
  case crcAnyOCSPOrCRL = 8
}

@property (nonatomic,readwrite,assign,getter=revocationCheck,setter=setRevocationCheck:) int revocationCheck;

- (int)revocationCheck;
- (void)setRevocationCheck :(int)newRevocationCheck;

Default Value

1

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

Signatures Property (XAdESSigner Module)

Provides details of all signatures found in the XML document.

Syntax

• Swift
• Objective-C

public var signatures: Array<XAdESSignature> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=signatureCount) int signatureCount;

- (int)signatureCount;

- (int)signatureCanonicalizationMethod:(int)signatureIndex;

- (int)signatureCertificateIndex:(int)signatureIndex;

- (int)signatureChainValidationDetails:(int)signatureIndex;

- (int)signatureChainValidationResult:(int)signatureIndex;

- (NSString*)signatureClaimedSigningTime:(int)signatureIndex;

- (long long)signatureHandle:(int)signatureIndex;

- (NSString*)signatureHashAlgorithm:(int)signatureIndex;

- (NSString*)signatureIssuerRDN:(int)signatureIndex;

- (NSString*)signatureLastArchivalTime:(int)signatureIndex;

- (NSString*)signaturePolicyHash:(int)signatureIndex;

- (NSString*)signaturePolicyHashAlgorithm:(int)signatureIndex;

- (NSString*)signaturePolicyID:(int)signatureIndex;

- (NSString*)signaturePolicyURI:(int)signatureIndex;

- (NSData*)signatureSerialNumber:(int)signatureIndex;

- (NSData*)signatureSignatureBytes:(int)signatureIndex;

- (int)signatureSignatureType:(int)signatureIndex;

- (int)signatureSignatureValidationResult:(int)signatureIndex;

- (NSData*)signatureSubjectKeyID:(int)signatureIndex;

- (NSString*)signatureSubjectRDN:(int)signatureIndex;

- (BOOL)signatureTimestamped:(int)signatureIndex;

- (NSString*)signatureValidatedSigningTime:(int)signatureIndex;

- (NSString*)signatureValidationLog:(int)signatureIndex;

- (BOOL)signatureXAdES:(int)signatureIndex;

- (int)signatureXAdESForm:(int)signatureIndex;

- (int)signatureXAdESVersion:(int)signatureIndex;

- (NSString*)signatureXMLElement:(int)signatureIndex;

Default Value

""

Remarks

Use this property to get the details of all the signatures identified in the XML document.

SigningCertificate Property (XAdESSigner Module)

The certificate to be used for signing.

Syntax

• Swift
• Objective-C

public var signingCertificate: Certificate {
  get {...}
  set {...}
}

@property (nonatomic,readonly,assign,getter=signingCertBytes) NSData* signingCertBytes;

- (NSData*)signingCertBytes;

@property (nonatomic,readwrite,assign,getter=signingCertHandle,setter=setSigningCertHandle:) long long signingCertHandle;

- (long long)signingCertHandle;
- (void)setSigningCertHandle :(long long)newSigningCertHandle;

 

Default Value

""

Remarks

Use this property to specify the certificate that shall be used for signing the data. Note that this certificate should have a private key associated with it. Use SigningChain to supply the rest of the certificate chain for inclusion into the signature.

SigningChain Property (XAdESSigner Module)

The signing certificate chain.

Syntax

• Swift
• Objective-C

public var signingChain: Array<Certificate> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=signingChainCount,setter=setSigningChainCount:) int signingChainCount;

- (int)signingChainCount;
- (void)setSigningChainCount :(int)newSigningChainCount;

- (NSData*)signingChainBytes:(int)signingChainIndex;

- (long long)signingChainHandle:(int)signingChainIndex;
- (void)setSigningChainHandle:(int)signingChainIndex :(long long)newSigningChainHandle;

Default Value

""

Remarks

Use this property to provide the chain for the signing certificate. Use the SigningCertificate property, if it is available, to provide the signing certificate itself.

SocketSettings Property (XAdESSigner Module)

Manages network connection settings.

Syntax

• Swift
• Objective-C

public var socketSettings: SocketSettings {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=socketDNSMode,setter=setSocketDNSMode:) int socketDNSMode;

- (int)socketDNSMode;
- (void)setSocketDNSMode :(int)newSocketDNSMode;

@property (nonatomic,readwrite,assign,getter=socketDNSPort,setter=setSocketDNSPort:) int socketDNSPort;

- (int)socketDNSPort;
- (void)setSocketDNSPort :(int)newSocketDNSPort;

@property (nonatomic,readwrite,assign,getter=socketDNSQueryTimeout,setter=setSocketDNSQueryTimeout:) int socketDNSQueryTimeout;

- (int)socketDNSQueryTimeout;
- (void)setSocketDNSQueryTimeout :(int)newSocketDNSQueryTimeout;

@property (nonatomic,readwrite,assign,getter=socketDNSServers,setter=setSocketDNSServers:) NSString* socketDNSServers;

- (NSString*)socketDNSServers;
- (void)setSocketDNSServers :(NSString*)newSocketDNSServers;

@property (nonatomic,readwrite,assign,getter=socketDNSTotalTimeout,setter=setSocketDNSTotalTimeout:) int socketDNSTotalTimeout;

- (int)socketDNSTotalTimeout;
- (void)setSocketDNSTotalTimeout :(int)newSocketDNSTotalTimeout;

@property (nonatomic,readwrite,assign,getter=socketIncomingSpeedLimit,setter=setSocketIncomingSpeedLimit:) int socketIncomingSpeedLimit;

- (int)socketIncomingSpeedLimit;
- (void)setSocketIncomingSpeedLimit :(int)newSocketIncomingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketLocalAddress,setter=setSocketLocalAddress:) NSString* socketLocalAddress;

- (NSString*)socketLocalAddress;
- (void)setSocketLocalAddress :(NSString*)newSocketLocalAddress;

@property (nonatomic,readwrite,assign,getter=socketLocalPort,setter=setSocketLocalPort:) int socketLocalPort;

- (int)socketLocalPort;
- (void)setSocketLocalPort :(int)newSocketLocalPort;

@property (nonatomic,readwrite,assign,getter=socketOutgoingSpeedLimit,setter=setSocketOutgoingSpeedLimit:) int socketOutgoingSpeedLimit;

- (int)socketOutgoingSpeedLimit;
- (void)setSocketOutgoingSpeedLimit :(int)newSocketOutgoingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketTimeout,setter=setSocketTimeout:) int socketTimeout;

- (int)socketTimeout;
- (void)setSocketTimeout :(int)newSocketTimeout;

@property (nonatomic,readwrite,assign,getter=socketUseIPv6,setter=setSocketUseIPv6:) BOOL socketUseIPv6;

- (BOOL)socketUseIPv6;
- (void)setSocketUseIPv6 :(BOOL)newSocketUseIPv6;

 

Default Value

""

Remarks

Use this property to tune up network connection parameters.

Timestamps Property (XAdESSigner Module)

Contains a collection of timestamps for the processed document.

Syntax

• Swift
• Objective-C

public var timestamps: Array<TimestampInfo> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=timestampCount) int timestampCount;

- (int)timestampCount;

- (long long)timestampAccuracy:(int)timestampIndex;

- (NSData*)timestampBytes:(int)timestampIndex;

- (int)timestampCertificateIndex:(int)timestampIndex;

- (int)timestampChainValidationDetails:(int)timestampIndex;

- (int)timestampChainValidationResult:(int)timestampIndex;

- (NSString*)timestampHashAlgorithm:(int)timestampIndex;

- (NSData*)timestampSerialNumber:(int)timestampIndex;

- (int)timestampSignatureIndex:(int)timestampIndex;

- (NSString*)timestampTime:(int)timestampIndex;

- (int)timestampTimestampType:(int)timestampIndex;

- (NSString*)timestampTSAName:(int)timestampIndex;

- (NSString*)timestampValidationLog:(int)timestampIndex;

- (int)timestampValidationResult:(int)timestampIndex;

Default Value

""

Remarks

Use this property to access the timestamps included in the processed document.

TimestampServer Property (XAdESSigner Module)

The address of the timestamping server.

Syntax

• Swift
• Objective-C

public var timestampServer: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=timestampServer,setter=setTimestampServer:) NSString* timestampServer;

- (NSString*)timestampServer;
- (void)setTimestampServer :(NSString*)newTimestampServer;

Default Value

""

Remarks

Use this property to set the address of the TSA (Time Stamping Authority) server which should be used for timestamping the signature.

TLSClientChain Property (XAdESSigner Module)

The TLS client certificate chain.

Syntax

• Swift
• Objective-C

public var tlsClientChain: Array<Certificate> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=TLSClientCertCount,setter=setTLSClientCertCount:) int TLSClientCertCount;

- (int)TLSClientCertCount;
- (void)setTLSClientCertCount :(int)newTLSClientCertCount;

- (NSData*)TLSClientCertBytes:(int)tLSClientCertIndex;

- (long long)TLSClientCertHandle:(int)tLSClientCertIndex;
- (void)setTLSClientCertHandle:(int)tLSClientCertIndex :(long long)newTLSClientCertHandle;

Default Value

""

Remarks

Assign a certificate chain to this property to enable TLS client authentication in the class. Note that the client's end-entity certificate should have a private key associated with it.

Use the CertificateStorage or CertificateManager components to import the certificate from a file, system store, or PKCS11 device.

TLSServerChain Property (XAdESSigner Module)

The TLS server's certificate chain.

Syntax

• Swift
• Objective-C

public var tlsServerChain: Array<Certificate> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=TLSServerCertCount) int TLSServerCertCount;

- (int)TLSServerCertCount;

- (NSData*)TLSServerCertBytes:(int)tLSServerCertIndex;

- (long long)TLSServerCertHandle:(int)tLSServerCertIndex;

Default Value

""

Remarks

Use this property to access the certificate chain sent by the TLS server. This property is ready to read when the TLSCertValidate event is fired by the client component.

TLSSettings Property (XAdESSigner Module)

Manages TLS layer settings.

Syntax

• Swift
• Objective-C

public var tlsSettings: TLSSettings {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=TLSAutoValidateCertificates,setter=setTLSAutoValidateCertificates:) BOOL TLSAutoValidateCertificates;

- (BOOL)TLSAutoValidateCertificates;
- (void)setTLSAutoValidateCertificates :(BOOL)newTLSAutoValidateCertificates;

@property (nonatomic,readwrite,assign,getter=TLSBaseConfiguration,setter=setTLSBaseConfiguration:) int TLSBaseConfiguration;

- (int)TLSBaseConfiguration;
- (void)setTLSBaseConfiguration :(int)newTLSBaseConfiguration;

@property (nonatomic,readwrite,assign,getter=TLSCiphersuites,setter=setTLSCiphersuites:) NSString* TLSCiphersuites;

- (NSString*)TLSCiphersuites;
- (void)setTLSCiphersuites :(NSString*)newTLSCiphersuites;

@property (nonatomic,readwrite,assign,getter=TLSECCurves,setter=setTLSECCurves:) NSString* TLSECCurves;

- (NSString*)TLSECCurves;
- (void)setTLSECCurves :(NSString*)newTLSECCurves;

@property (nonatomic,readwrite,assign,getter=TLSExtensions,setter=setTLSExtensions:) NSString* TLSExtensions;

- (NSString*)TLSExtensions;
- (void)setTLSExtensions :(NSString*)newTLSExtensions;

@property (nonatomic,readwrite,assign,getter=TLSForceResumeIfDestinationChanges,setter=setTLSForceResumeIfDestinationChanges:) BOOL TLSForceResumeIfDestinationChanges;

- (BOOL)TLSForceResumeIfDestinationChanges;
- (void)setTLSForceResumeIfDestinationChanges :(BOOL)newTLSForceResumeIfDestinationChanges;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedIdentity,setter=setTLSPreSharedIdentity:) NSString* TLSPreSharedIdentity;

- (NSString*)TLSPreSharedIdentity;
- (void)setTLSPreSharedIdentity :(NSString*)newTLSPreSharedIdentity;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKey,setter=setTLSPreSharedKey:) NSString* TLSPreSharedKey;

- (NSString*)TLSPreSharedKey;
- (void)setTLSPreSharedKey :(NSString*)newTLSPreSharedKey;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKeyCiphersuite,setter=setTLSPreSharedKeyCiphersuite:) NSString* TLSPreSharedKeyCiphersuite;

- (NSString*)TLSPreSharedKeyCiphersuite;
- (void)setTLSPreSharedKeyCiphersuite :(NSString*)newTLSPreSharedKeyCiphersuite;

@property (nonatomic,readwrite,assign,getter=TLSRenegotiationAttackPreventionMode,setter=setTLSRenegotiationAttackPreventionMode:) int TLSRenegotiationAttackPreventionMode;

- (int)TLSRenegotiationAttackPreventionMode;
- (void)setTLSRenegotiationAttackPreventionMode :(int)newTLSRenegotiationAttackPreventionMode;

@property (nonatomic,readwrite,assign,getter=TLSRevocationCheck,setter=setTLSRevocationCheck:) int TLSRevocationCheck;

- (int)TLSRevocationCheck;
- (void)setTLSRevocationCheck :(int)newTLSRevocationCheck;

@property (nonatomic,readwrite,assign,getter=TLSSSLOptions,setter=setTLSSSLOptions:) int TLSSSLOptions;

- (int)TLSSSLOptions;
- (void)setTLSSSLOptions :(int)newTLSSSLOptions;

@property (nonatomic,readwrite,assign,getter=TLSTLSMode,setter=setTLSTLSMode:) int TLSTLSMode;

- (int)TLSTLSMode;
- (void)setTLSTLSMode :(int)newTLSTLSMode;

@property (nonatomic,readwrite,assign,getter=TLSUseExtendedMasterSecret,setter=setTLSUseExtendedMasterSecret:) BOOL TLSUseExtendedMasterSecret;

- (BOOL)TLSUseExtendedMasterSecret;
- (void)setTLSUseExtendedMasterSecret :(BOOL)newTLSUseExtendedMasterSecret;

@property (nonatomic,readwrite,assign,getter=TLSUseSessionResumption,setter=setTLSUseSessionResumption:) BOOL TLSUseSessionResumption;

- (BOOL)TLSUseSessionResumption;
- (void)setTLSUseSessionResumption :(BOOL)newTLSUseSessionResumption;

@property (nonatomic,readwrite,assign,getter=TLSVersions,setter=setTLSVersions:) int TLSVersions;

- (int)TLSVersions;
- (void)setTLSVersions :(int)newTLSVersions;

 

Default Value

""

Remarks

Use this property to tune up the TLS layer parameters.

TrustedCertificates Property (XAdESSigner Module)

A list of trusted certificates for chain validation.

Syntax

• Swift
• Objective-C

public var trustedCertificates: Array<Certificate> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=trustedCertCount,setter=setTrustedCertCount:) int trustedCertCount;

- (int)trustedCertCount;
- (void)setTrustedCertCount :(int)newTrustedCertCount;

- (NSData*)trustedCertBytes:(int)trustedCertIndex;

- (long long)trustedCertHandle:(int)trustedCertIndex;
- (void)setTrustedCertHandle:(int)trustedCertIndex :(long long)newTrustedCertHandle;

Default Value

""

Remarks

Use this property to supply a list of trusted certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when root CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.

The purpose of this certificate collection is largely the same as that of the Windows Trusted Root Certification Authorities system store.

Use this property with extreme care as it directly affects chain verifiability; a wrong certificate added to the trusted list may result in bad chains being accepted, and forfeited signatures being recognized as genuine. Only add certificates that originate from the parties that you know and trust.

ValidationMoment Property (XAdESSigner Module)

The time point at which signature validity is to be established.

Syntax

• Swift
• Objective-C

public var validationMoment: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=validationMoment,setter=setValidationMoment:) NSString* validationMoment;

- (NSString*)validationMoment;
- (void)setValidationMoment :(NSString*)newValidationMoment;

Default Value

""

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

XPathNamespaces Property (XAdESSigner Module)

Specifies namespaces for the XPath expression.

Syntax

• Swift
• Objective-C

public var xPathNamespaces: Array<XMLNamespace> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=namespaceCount,setter=setNamespaceCount:) int namespaceCount;

- (int)namespaceCount;
- (void)setNamespaceCount :(int)newNamespaceCount;

- (NSString*)namespacePrefix:(int)namespaceIndex;
- (void)setNamespacePrefix:(int)namespaceIndex :(NSString*)newNamespacePrefix;

- (NSString*)namespaceURI:(int)namespaceIndex;
- (void)setNamespaceURI:(int)namespaceIndex :(NSString*)newNamespaceURI;

Default Value

""

Remarks

This property contains a list of prefixes and namespaceURIs that are used in XPath expression with XMLElement property, and with TargetXMLElement and XPathPrefixList properties of the references.

AddDataReference Method (XAdESSigner Module)

Creates a new XML reference to the specified data.

Syntax

• Swift
• Objective-C

public func addDataReference(dataURI: String, data: Data) throws -> Int32

- (int)addDataReference:(NSString*)dataURI :(NSData*)data;

Remarks

Use this method to add a reference to the custom data. Pass the reference's URI via DataURI parameter.

This method uses HashAlgorithm property to specify the hash algorithm of the reference.

The method returns the index of the new reference entry in the References collection.

AddReference Method (XAdESSigner Module)

Creates a new XML reference to the specified XML element.

Syntax

• Swift
• Objective-C

public func addReference(targetXmlElement: String, customId: String, autoGenerateId: Bool) throws -> Int32

- (int)addReference:(NSString*)targetXmlElement :(NSString*)customId :(BOOL)autoGenerateId;

Remarks

Use this method to add a reference to a particular XML element.

The reference's URI is set basing on the ID of the XML element. If the XML element doesn't have an ID then a CustomId value will be used. If CustomId is empty and AutoGenerateId is set, the ID will be generated automatically. An exception will be thrown otherwise.

This method uses CanonicalizationMethod and HashAlgorithm properties to specify the canonicalization method and hash algorithm of the reference.

The method returns the index of the new reference entry in the References collection.

AddTimestampValidationData Method (XAdESSigner Module)

Use this method to add timestamp validation data to the signature.

Syntax

• Swift
• Objective-C

public func addTimestampValidationData(sigIndex: Int32) throws -> Void

- (void)addTimestampValidationData:(int)sigIndex;

Remarks

Call this method to add certificates and revocation information used to validate timestamp's signer certificates at a particular time. This method could be called separately or in SignatureValidated event handler after successful signature validation.

AddValidationDataRefs Method (XAdESSigner Module)

Use this method to add signature validation references to the signature.

Syntax

• Swift
• Objective-C

public func addValidationDataRefs(sigIndex: Int32) throws -> Void

- (void)addValidationDataRefs:(int)sigIndex;

Remarks

Call this method to add references to certificates and revocation information used to validate a signature at a particular time. This method could be called separately or in SignatureValidated event handler after successful signature validation.

AddValidationDataValues Method (XAdESSigner Module)

Use this method to add signature validation values to the signature.

Syntax

• Swift
• Objective-C

public func addValidationDataValues(sigIndex: Int32) throws -> Void

- (void)addValidationDataValues:(int)sigIndex;

Remarks

Call this method to add certificates and revocation information used to validate a signature at a particular time. This method could be called separately or in SignatureValidated event handler after successful signature validation.

Close Method (XAdESSigner Module)

Closes an opened document.

Syntax

• Swift
• Objective-C

public func close(saveChanges: Bool) throws -> Void

- (void)close:(BOOL)saveChanges;

Remarks

Use this method to close a previously opened document. Set SaveChanges to true to apply any changes made.

Config Method (XAdESSigner Module)

Sets or retrieves a configuration setting.

Syntax

• Swift
• Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (XAdESSigner Module)

Performs an additional action.

Syntax

• Swift
• Objective-C

public func doAction(actionID: String, actionParams: String) throws -> String

- (NSString*)doAction:(NSString*)actionID :(NSString*)actionParams;

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

ExtractAsyncData Method (XAdESSigner Module)

Extracts user data from the DC signing service response.

Syntax

• Swift
• Objective-C

public func extractAsyncData(asyncReply: String) throws -> String

- (NSString*)extractAsyncData:(NSString*)asyncReply;

Remarks

Call this method before finalizing the asynchronous signing process to extract the data passed to the ExternalCrypto.Data property on the pre-signing stage.

The Data parameter can be used to pass some state or document identifier along with the signing request from the pre-signing to the completion async stage.

GetInnerXML Method (XAdESSigner Module)

Get the inner XML content of the selected XML element.

Syntax

• Swift
• Objective-C

public func getInnerXML(xPath: String) throws -> String

- (NSString*)getInnerXML:(NSString*)XPath;

Remarks

Call this method to get the inner XML content of the selected XML element.

GetOuterXML Method (XAdESSigner Module)

Get the outer XML content of the selected XML element.

Syntax

• Swift
• Objective-C

public func getOuterXML(xPath: String) throws -> String

- (NSString*)getOuterXML:(NSString*)XPath;

Remarks

Call this method to get the outer XML content of the selected XML element.

GetTextContent Method (XAdESSigner Module)

Get the text content of the selected XML element.

Syntax

• Swift
• Objective-C

public func getTextContent(xPath: String) throws -> String

- (NSString*)getTextContent:(NSString*)XPath;

Remarks

Call this method to get the text content of the selected XML element.

Open Method (XAdESSigner Module)

Opens a document for signing or updating.

Syntax

• Swift
• Objective-C

public func open() throws -> Void

- (void)open;

Remarks

Use this method to open a document for signing or updating. When finished, call Close to complete or discard the operation.

Revalidate Method (XAdESSigner Module)

Revalidates a signature in accordance with current settings.

Syntax

• Swift
• Objective-C

public func revalidate(index: Int32, detached: Bool) throws -> Void

- (void)revalidate:(int)index :(BOOL)detached;

Remarks

Use this method to re-validate a signature in the opened XML document.

SetInnerXML Method (XAdESSigner Module)

Set the inner XML content of the selected XML element.

Syntax

• Swift
• Objective-C

public func setInnerXML(xPath: String, value: String) throws -> Void

- (void)setInnerXML:(NSString*)XPath :(NSString*)value;

Remarks

Call this method to set the inner XML content of the selected XML element.

SetTextContent Method (XAdESSigner Module)

Set the text content of the selected XML element.

Syntax

• Swift
• Objective-C

public func setTextContent(xPath: String, value: String) throws -> Void

- (void)setTextContent:(NSString*)XPath :(NSString*)value;

Remarks

Call this method to set the text content of the selected XML element.

Sign Method (XAdESSigner Module)

Signs an XML document.

Syntax

• Swift
• Objective-C

public func sign() throws -> Void

- (void)sign;

Remarks

Call this method to generate a signature over an XML document.

SignAsyncBegin Method (XAdESSigner Module)

Initiates the asynchronous signing operation.

Syntax

• Swift
• Objective-C

public func signAsyncBegin() throws -> String

- (NSString*)signAsyncBegin;

Remarks

When using the DC framework, call this method to initiate the asynchronous signing process. Upon completion, a pre-signed copy of the document will be saved in OutputFile (or OutputStream). Keep the pre-signed copy somewhere local, and pass the returned string ('the request state') to the DC processor for handling.

Upon receiving the response state from the DC processor, assign the path to the pre-signed copy to InputFile (or InputStream), and call SignAsyncEnd to finalize the signing.

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Use the ExternalCrypto.AsyncDocumentID property to supply a unique document ID to include in the request. This is helpful when creating batches of multiple async requests, as it allows you to pass the whole response batch to SignAsyncEnd and expect it to recover the correct response from the batch automatically.

AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth class), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method.

SignAsyncEnd Method (XAdESSigner Module)

Completes the asynchronous signing operation.

Syntax

• Swift
• Objective-C

public func signAsyncEnd(asyncReply: String) throws -> Void

- (void)signAsyncEnd:(NSString*)asyncReply;

Remarks

When using the DC framework, call this method upon receiving the response state from the DC processor to complete the asynchronous signing process.

Before calling this method, assign the path to the pre-signed copy of the document obtained from the prior SignAsyncBegin call to InputFile (or InputStream). The method will embed the signature into the pre-signed document, and save the complete signed document to OutputFile (or OutputStream).

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Use the ExternalCrypto.AsyncDocumentID parameter to pass a specific document ID if using batched AsyncReply. If used, it should match the value provided on the pre-signing (SignAsyncBegin) stage.

AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth class), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method.

SignExternal Method (XAdESSigner Module)

Signs the document using an external signing facility.

Syntax

• Swift
• Objective-C

public func signExternal() throws -> Void

- (void)signExternal;

Remarks

Call this method to delegate the low-level signing operation to an external, remote, or custom signing engine. This method is useful if the signature has to be made by a device accessible through a custom or non-standard signing interface.

When all preparations are done and hash is computed, the class fires ExternalSign event which allows to pass the hash value for signing.

Timestamp Method (XAdESSigner Module)

Use this method to add an timestamp.

Syntax

• Swift
• Objective-C

public func timestamp(sigIndex: Int32, timestampType: Int32) throws -> Void

- (void)timestamp:(int)sigIndex :(int)timestampType;

Remarks

Call this method to timestamp the signature. Use the TimestampServer property to provide the address of the TSA (Time Stamping Authority) server which should be used for timestamping. This method could be called separately or in SignatureValidated event handler after successful signature validation. Use the TimestampType parameter to specify the type of timestamp to create

Supported timestamp types:

Upgrade Method (XAdESSigner Module)

Upgrades existing XAdES signature to a new form.

Syntax

• Swift
• Objective-C

public func upgrade(sigIndex: Int32, toForm: Int32) throws -> Void

- (void)upgrade:(int)sigIndex :(int)toForm;

Remarks

XAdES standard defines a number of different 'forms' of signatures which can be used for different purposes. Use this method to upgrade XAdES signature to a new form specified by ToForm. Signatures can normally be upgraded from less sophisticated levels (BES, EPES) to more sophisticated (T, C, X, X-L, A).

The supported forms are:

ChainElementDownload Event (XAdESSigner Module)

Fires when there is a need to download a chain element from an online source.

Syntax

• Swift
• Objective-C

func onChainElementDownload(kind: Int32, certRDN: String, caCertRDN: String, location: String, action: inout Int32)

- (void)onChainElementDownload:(int)kind :(NSString*)certRDN :(NSString*)CACertRDN :(NSString*)location :(int*)action;

Remarks

Subscribe to this event to be notified about validation element retrievals. Use the Action parameter to suppress the download if required.

ChainElementNeeded Event (XAdESSigner Module)

Fires when an element required to validate the chain was not located.

Syntax

• Swift
• Objective-C

func onChainElementNeeded(kind: Int32, certRDN: String, caCertRDN: String)

- (void)onChainElementNeeded:(int)kind :(NSString*)certRDN :(NSString*)CACertRDN;

Remarks

Subscribe to this event to be notified about missing validation elements. Use the KnownCRLs, KnownCertificates, and KnownOCSPs properties in the event handler to provide the missing piece.

ChainElementStore Event (XAdESSigner Module)

This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.

Syntax

• Swift
• Objective-C

func onChainElementStore(kind: Int32, body: Data, uri: inout String)

- (void)onChainElementStore:(int)kind :(NSData*)body :(NSString**)URI;

Remarks

This event could occur if you are verifying XAdES-C form or higher. The Body parameter contains the element in binary form that should be stored along with a signature. Use the URI parameter to provide an URI of the stored element.

ChainValidated Event (XAdESSigner Module)

Reports the completion of a certificate chain validation.

Syntax

• Swift
• Objective-C

func onChainValidated(index: Int32, subjectRDN: String, validationResult: Int32, validationDetails: Int32)

- (void)onChainValidated:(int)index :(NSString*)subjectRDN :(int)validationResult :(int)validationDetails;

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.

ChainValidationProgress Event (XAdESSigner Module)

This event is fired multiple times during chain validation to report various stages of the validation procedure.

Syntax

• Swift
• Objective-C

func onChainValidationProgress(eventKind: String, certRDN: String, caCertRDN: String, action: inout Int32)

- (void)onChainValidationProgress:(NSString*)eventKind :(NSString*)certRDN :(NSString*)CACertRDN :(int*)action;

Remarks

Subscribe to this event to be notified about chain validation progress. Use the Action parameter to alter the validation flow.

The EventKind parameter reports the nature of the event being reported. The CertRDN and CACertRDN parameters report the distinguished names of the certificates that are relevant for the event invocation (one or both can be empty, depending on EventKind). Use the Action parameter to adjust the validation flow.

DocumentLoaded Event (XAdESSigner Module)

This event is fired when the document has been loaded into memory.

Syntax

• Swift
• Objective-C

func onDocumentLoaded(cancel: inout Bool)

- (void)onDocumentLoaded:(int*)cancel;

Remarks

The handler for this event is a good place to check document properties, which may be useful when preparing the signature, for example, the document format.

Set Cancel to true to terminate document processing on this stage.

Error Event (XAdESSigner Module)

Information about errors during signing.

Syntax

• Swift
• Objective-C

func onError(errorCode: Int32, description: String)

- (void)onError:(int)errorCode :(NSString*)description;

Remarks

The event is fired in case of exceptional conditions during signing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to XML.

ExternalSign Event (XAdESSigner Module)

Handles remote or external signing initiated by the SignExternal method or other source.

Syntax

• Swift
• Objective-C

func onExternalSign(operationId: String, hashAlgorithm: String, pars: String, data: String, signedData: inout String)

- (void)onExternalSign:(NSString*)operationId :(NSString*)hashAlgorithm :(NSString*)pars :(NSString*)data :(NSString**)signedData;

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

FormatElement Event (XAdESSigner Module)

Reports the XML element that is currently being processed.

Syntax

• Swift
• Objective-C

func onFormatElement(startTagWhitespace: inout String, endTagWhitespace: inout String, level: Int32, path: String, hasChildElements: Bool)

- (void)onFormatElement:(NSString**)startTagWhitespace :(NSString**)endTagWhitespace :(int)level :(NSString*)path :(BOOL)hasChildElements;

Remarks

Path and Level specify the path to the XML element being processed and its nesting level, respectively.

HasChildElements specify if processed XML element has child elements.

Among other purposes, this event may be used to add whitespace formatting before or after a particular element in the signature.

FormatText Event (XAdESSigner Module)

Reports XML text that is currently being processed.

Syntax

• Swift
• Objective-C

func onFormatText(text: inout String, textType: Int32, level: Int32, path: String)

- (void)onFormatText:(NSString**)text :(int)textType :(int)level :(NSString*)path;

Remarks

TextType parameter specifies the type of the XML text (normal or Base64-encoded) that is stored in the element; Path and Level specify the path to the XML element and its nesting level.

Among other purposes, this event may be used to add whitespace formatting before or after a particular element in the signature.

Notification Event (XAdESSigner Module)

This event notifies the application about an underlying control flow event.

Syntax

• Swift
• Objective-C

func onNotification(eventID: String, eventParam: String)

- (void)onNotification:(NSString*)eventID :(NSString*)eventParam;

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:

ReferenceValidated Event (XAdESSigner Module)

Marks the end of a reference validation.

Syntax

• Swift
• Objective-C

func onReferenceValidated(referenceIndex: Int32, id: String, uri: String, refType: String, digestValid: Bool)

- (void)onReferenceValidated:(int)referenceIndex :(NSString*)ID :(NSString*)URI :(NSString*)refType :(BOOL)digestValid;

Remarks

The class fires this event to report completion of a reference validation. A reference is a building block of a signature as it binds signature coverage to a particular piece of the document.

ResolveReference Event (XAdESSigner Module)

Asks the application to resolve a reference.

Syntax

• Swift
• Objective-C

func onResolveReference(referenceIndex: Int32, uri: String)

- (void)onResolveReference:(int)referenceIndex :(NSString*)URI;

Remarks

This event is fired when the control could not automatically resolve a reference and requires custom treatment.

URI contains a reference to the data.

ReferenceIndex specifies the index of the reference to process.

Based on the reference's URI the event handler should set either TargetXMLElement or TargetData property of the reference.

SignatureFound Event (XAdESSigner Module)

Signifies the start of signature validation.

Syntax

• Swift
• Objective-C

func onSignatureFound(index: Int32, issuerRDN: String, serialNumber: Data, subjectKeyID: Data, certFound: Bool, validateSignature: inout Bool, validateChain: inout Bool)

- (void)onSignatureFound:(int)index :(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID :(BOOL)certFound :(int*)validateSignature :(int*)validateChain;

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound parameter is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (XAdESSigner Module)

Marks the completion of the signature validation routine.

Syntax

• Swift
• Objective-C

func onSignatureValidated(index: Int32, issuerRDN: String, serialNumber: Data, subjectKeyID: Data, validationResult: Int32)

- (void)onSignatureValidated:(int)index :(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID :(int)validationResult;

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.

TimestampFound Event (XAdESSigner Module)

Signifies the start of a timestamp validation routine.

Syntax

• Swift
• Objective-C

func onTimestampFound(index: Int32, issuerRDN: String, serialNumber: Data, subjectKeyID: Data, certFound: Bool, validateTimestamp: inout Bool, validateChain: inout Bool)

- (void)onTimestampFound:(int)index :(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID :(BOOL)certFound :(int*)validateTimestamp :(int*)validateChain;

Remarks

This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.

The CertFound parameter is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

TimestampRequest Event (XAdESSigner Module)

Fires when the component is ready to request a timestamp from an external TSA.

Syntax

• Swift
• Objective-C

func onTimestampRequest(tsa: String, timestampRequest: String, timestampResponse: inout String, suppressDefault: inout Bool)

- (void)onTimestampRequest:(NSString*)TSA :(NSString*)timestampRequest :(NSString**)timestampResponse :(int*)suppressDefault;

Remarks

Subscribe to this event to intercept timestamp requests. You can use it to override timestamping requests and perform them in your code.

The TSA parameter indicates the timestamping service being used. It matches the value passed to the TimestampServer property. Set the SuppressDefault parameter to false if you would like to stop the built-in TSA request from going ahead. The built-in TSA request is also not performed if the returned TimestampResponse parameter is not empty.

TimestampValidated Event (XAdESSigner Module)

Reports the completion of the timestamp validation routine.

Syntax

• Swift
• Objective-C

func onTimestampValidated(index: Int32, issuerRDN: String, serialNumber: Data, subjectKeyID: Data, time: String, validationResult: Int32, chainValidationResult: Int32, chainValidationDetails: Int32)

- (void)onTimestampValidated:(int)index :(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID :(NSString*)time :(int)validationResult :(int)chainValidationResult :(int)chainValidationDetails;

Remarks

This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.

TLSCertNeeded Event (XAdESSigner Module)

Fires when a remote TLS party requests a client certificate.

Syntax

• Swift
• Objective-C

func onTLSCertNeeded(host: String, caNames: String)

- (void)onTLSCertNeeded:(NSString*)host :(NSString*)CANames;

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.

TLSCertValidate Event (XAdESSigner Module)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

• Swift
• Objective-C

func onTLSCertValidate(serverHost: String, serverIP: String, accept: inout Bool)

- (void)onTLSCertValidate:(NSString*)serverHost :(NSString*)serverIP :(int*)accept;

Remarks

This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, classes may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the class, and can be adjusted if needed.

TLSEstablished Event (XAdESSigner Module)

Fires when a TLS handshake with Host successfully completes.

Syntax

• Swift
• Objective-C

func onTLSEstablished(host: String, version: String, ciphersuite: String, connectionId: Data, abort: inout Bool)

- (void)onTLSEstablished:(NSString*)host :(NSString*)version :(NSString*)ciphersuite :(NSData*)connectionId :(int*)abort;

Remarks

The class uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

TLSHandshake Event (XAdESSigner Module)

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

• Swift
• Objective-C

func onTLSHandshake(host: String, abort: inout Bool)

- (void)onTLSHandshake:(NSString*)host :(int*)abort;

Remarks

The class uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.

TLSShutdown Event (XAdESSigner Module)

Reports the graceful closure of a TLS connection.

Syntax

• Swift
• Objective-C

func onTLSShutdown(host: String)

- (void)onTLSShutdown:(NSString*)host;

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Certificate Type

Provides details of an individual X.509 certificate.

Remarks

This type provides access to X.509 certificate details.

Fields

Constructors

public init(stream: )

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.

public init()

Creates a new object with default field values.

CRL Type

Represents a Certificate Revocation List.

Remarks

CRLs store information about revoked certificates, i.e., certificates that have been identified as invalid by their issuing certificate authority (CA) for any number of reasons.

Each CRL object lists certificates from a single CA and identifies them by their serial numbers. A CA may or may not publish a CRL, may publish several CRLs, or may publish the same CRL in multiple locations.

Unlike OCSP responses, CRLs only list certificates that have been revoked. They do not list certificates that are still valid.

Fields

Constructors

public init()

Creates an empty CRL object.

ExternalCrypto Type

Specifies the parameters of external cryptographic calls.

Remarks

External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.

Fields

Constructors

public init()

Creates a new ExternalCrypto object with default field values.

OCSPResponse Type

Represents a single OCSP response originating from an OCSP responder.

Remarks

OCSP is a protocol that allows verification of certificate status in real-time, and is an alternative to Certificate Revocation Lists (CRLs).

An OCSP response is a snapshot of the certificate status at a given time.

Fields

Constructors

public init()

Creates an empty OCSP response object.

ProxySettings Type

A container for proxy server settings.

Remarks

This type exposes a collection of properties for tuning up the proxy server configuration.

Fields

Constructors

public init()

Creates a new ProxySettings object.

SocketSettings Type

A container for the socket settings.

Remarks

This type is a container for socket-layer parameters.

Fields

Constructors

public init()

Creates a new SocketSettings object.

TimestampInfo Type

A container for timestamp information.

Remarks

The TimestampInfo object contains details of a third-party timestamp and the outcome of its validation.

Fields

Constructors

public init()

Creates a new TimestampInfo object with default field values.

TLSSettings Type

A container for TLS connection settings.

Remarks

The TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.

Fields