Authenticator Class

Properties   Methods   Events   Config Settings   Errors  

The Authenticator class specializes in user authentication.

Class Name

SecureBlackbox_Authenticator

Procedural Interface

 secureblackbox_authenticator_open();
 secureblackbox_authenticator_close($res);
 secureblackbox_authenticator_register_callback($res, $id, $function);
 secureblackbox_authenticator_get_last_error($res);
 secureblackbox_authenticator_get_last_error_code($res);
 secureblackbox_authenticator_set($res, $id, $index, $value);
 secureblackbox_authenticator_get($res, $id, $index);
 secureblackbox_authenticator_do_config($res, $configurationstring);
 secureblackbox_authenticator_do_continueauth($res, $state, $authtoken);
 secureblackbox_authenticator_do_doaction($res, $actionid, $actionparams);
 secureblackbox_authenticator_do_startauth($res, $userid);

Remarks

Authenticator provides capabilities for implementing the authenticating party (as opposed to the one being authenticated) of the authentication protocol.

Authenticator can be used in a variety of authentication scenarios, ranging from simple password checks to complicated multi-factor variants. It also supports authentication via a SBB-own DC protocol, which makes it a good pair for DCAuth control.

In default configuration the component uses the attached database of users to handle authentication requests. The authentication flow can be altered if needed to match specific authentication requirements.

In Authenticator's terms, the authentication process is divided into a sequence of atomic steps. Each step is characterized by a user providing an authentication token - such as a password or PIN - and the authenticator validating that token. Each validation step may result in one of the following outcomes:

  • Authentication succeeded: the authentication has been completed with the positive outcome;
  • Authentication failed: the authentication process has failed, the user didn't provide enough evidence to confirm they are who they claim they are;
  • Further authentication is required: the authentication was partly successful, but the settings of the component or user details require further step(s) to be taken.

Use the following logic when integrating the Authenticator into your project:

  • Whenever you receive an authentication request from a user, call the StartAuth method, passing the UserID as a parameter. This initiates the authentication procedure: the Authenticator control looks up the user in the Users database and picks the first authentication method. It then returns the Further authentication is required result and stores the details of the first authentication step in AuthInfo property. Apart from the information about the authentication method that is to be performed during this step, AuthInfo also contains a > value, which accumulates parameters and progress of the user's authentication flow. You can save the state value on this stage, and restore it later when a response from the user is received. With that in mind, class is stateless; you can save the current authentication state in a database, and return to it from a different context.
  • Now that you have obtained Further authentication needed from StartAuth, it's time to check the > and request the corresponding token from the user. For example, if the method is 'password', you may present the user with a password dialog.
  • Upon receiving a password (or other kind of authentication token) from the user, pass it to the ContinueAuth method, together with the state object that you saved on the preceding step. The component will process the token and come up with one of the three results given above, signifying the end of the first authentication step. If Further authentication is required result is returned, another authentication step needs to be performed (either because a multi-factor authentication is configured for this user, or because an alternative authentication method was chosen following failure of the previous attempt). If that is the case, follow the guidance for StartAuth-initiated step above.

    Depending on the settings, many authentication steps may need to be performed, so your code may ultimately end up calling ContinueAuth many times.

class can be customized to use external user information sources instead of a predefined user database. AuthStart, AuthVerify, and AuthAttemptResult events provide an opportunity for your code to intervene into the authentication process by defining your own authentication procedures and validating authentication tokens manually.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

AuthInfoAuthLogContains the authentication log.
AuthInfoAuthMethodContains the current authentication method.
AuthInfoAuthMethodParsContains the authentication method parameters.
AuthInfoCompletedMethodsContains a comma-separated list of completed authentication methods.
AuthInfoLastAuthMessageContains an uninterpreted authentication message to be displayed to the authenticating user.
AuthInfoLastAuthResultContains the result of the last authentication token validation.
AuthInfoRemainingMethodsContains a comma-separated list of authentication methods yet to perform.
AuthInfoStateContains a state of the overall authentication process.
AuthInfoUserIDReturns the ID of the user being authenticated, as passed to StartAuth .
BlockedCertCountThe number of records in the BlockedCert arrays.
BlockedCertBytesReturns the raw certificate data in DER format.
BlockedCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
CertCountThe number of records in the Cert arrays.
CertBytesReturns the raw certificate data in DER format.
CertCAIndicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).
CertCAKeyIDA unique identifier (fingerprint) of the CA certificate's private key.
CertCRLDistributionPointsLocations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.
CertCurveSpecifies the elliptic curve of the EC public key.
CertFingerprintContains the fingerprint (a hash imprint) of this certificate.
CertFriendlyNameContains an associated alias (friendly name) of the certificate.
CertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
CertHashAlgorithmSpecifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .
CertIssuerThe common name of the certificate issuer (CA), typically a company name.
CertIssuerRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
CertKeyAlgorithmSpecifies the public key algorithm of this certificate.
CertKeyBitsReturns the length of the public key.
CertKeyFingerprintReturns a fingerprint of the public key contained in the certificate.
CertKeyUsageIndicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
CertKeyValidReturns True if the certificate's key is cryptographically valid, and False otherwise.
CertOCSPLocationsLocations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.
CertPolicyIDsContains identifiers (OIDs) of the applicable certificate policies.
CertPublicKeyBytesContains the certificate's public key in DER format.
CertSelfSignedIndicates whether the certificate is self-signed (root) or signed by an external CA.
CertSerialNumberReturns the certificate's serial number.
CertSigAlgorithmIndicates the algorithm that was used by the CA to sign this certificate.
CertSubjectThe common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
CertSubjectKeyIDContains a unique identifier (fingerprint) of the certificate's private key.
CertSubjectRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
CertValidFromThe time point at which the certificate becomes valid, in UTC.
CertValidToThe time point at which the certificate expires, in UTC.
ChainValidationDetailsThe details of a certificate chain validation outcome.
ChainValidationResultThe general outcome of a certificate chain validation routine. Use ChainValidationDetails to get information about the reasons that contributed to the validation result.
DefaultAuthMethodsContains the list of default authentication methods.
ExternalCryptoAsyncDocumentIDSpecifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.
ExternalCryptoCustomParamsCustom parameters to be passed to the signing service (uninterpreted).
ExternalCryptoDataAdditional data to be included in the async state and mirrored back by the requestor.
ExternalCryptoExternalHashCalculationSpecifies whether the message hash is to be calculated at the external endpoint.
ExternalCryptoHashAlgorithmSpecifies the request's signature hash algorithm.
ExternalCryptoKeyIDThe ID of the pre-shared key used for DC request authentication.
ExternalCryptoKeySecretThe pre-shared key used for DC request authentication.
ExternalCryptoMethodSpecifies the asynchronous signing method.
ExternalCryptoModeSpecifies the external cryptography mode.
ExternalCryptoPublicKeyAlgorithmProvide the public key algorithm here if the certificate is not available on the pre-signing stage.
FIPSModeReserved.
IgnoreChainValidationErrorsMakes the class tolerant to chain validation errors.
KnownCertCountThe number of records in the KnownCert arrays.
KnownCertBytesReturns the raw certificate data in DER format.
KnownCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
KnownCRLCountThe number of records in the KnownCRL arrays.
KnownCRLBytesReturns the raw CRL data in DER format.
KnownCRLHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
KnownOCSPCountThe number of records in the KnownOCSP arrays.
KnownOCSPBytesA buffer containing the raw OCSP response data.
KnownOCSPHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
OfflineModeSwitches the class to offline mode.
ProxyAddressThe IP address of the proxy server.
ProxyAuthenticationThe authentication type used by the proxy server.
ProxyPasswordThe password to authenticate to the proxy server.
ProxyPortThe port on the proxy server to connect to.
ProxyProxyTypeThe type of the proxy server.
ProxyRequestHeadersContains HTTP request headers for WebTunnel and HTTP proxy.
ProxyResponseBodyContains the HTTP or HTTPS (WebTunnel) proxy response body.
ProxyResponseHeadersContains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.
ProxyUseIPv6Specifies whether IPv6 should be used when connecting through the proxy.
ProxyUseProxyEnables or disables proxy-driven connection.
ProxyUsernameSpecifies the username credential for proxy authentication.
RevocationCheckSpecifies the kind(s) of revocation check to perform for all chain certificates.
SigningCertBytesReturns the raw certificate data in DER format.
SigningCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
SocketDNSModeSelects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.
SocketDNSPortSpecifies the port number to be used for sending queries to the DNS server.
SocketDNSQueryTimeoutThe timeout (in milliseconds) for each DNS query.
SocketDNSServersThe addresses of DNS servers to use for address resolution, separated by commas or semicolons.
SocketDNSTotalTimeoutThe timeout (in milliseconds) for the whole resolution process.
SocketIncomingSpeedLimitThe maximum number of bytes to read from the socket, per second.
SocketLocalAddressThe local network interface to bind the socket to.
SocketLocalPortThe local port number to bind the socket to.
SocketOutgoingSpeedLimitThe maximum number of bytes to write to the socket, per second.
SocketTimeoutThe maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
SocketUseIPv6Enables or disables IP protocol version 6.
TLSAutoValidateCertificatesSpecifies whether server-side TLS certificates should be validated automatically using internal validation rules.
TLSBaseConfigurationSelects the base configuration for the TLS settings.
TLSCiphersuitesA list of ciphersuites separated with commas or semicolons.
TLSECCurvesDefines the elliptic curves to enable.
TLSExtensionsProvides access to TLS extensions.
TLSForceResumeIfDestinationChangesWhether to force TLS session resumption when the destination address changes.
TLSPreSharedIdentityDefines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
TLSPreSharedKeyContains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
TLSPreSharedKeyCiphersuiteDefines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
TLSRenegotiationAttackPreventionModeSelects the renegotiation attack prevention mechanism.
TLSRevocationCheckSpecifies the kind(s) of revocation check to perform.
TLSSSLOptionsVarious SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.
TLSTLSModeSpecifies the TLS mode to use.
TLSUseExtendedMasterSecretEnables the Extended Master Secret Extension, as defined in RFC 7627.
TLSUseSessionResumptionEnables or disables the TLS session resumption capability.
TLSVersionsThe SSL/TLS versions to enable by default.
TrustedCertCountThe number of records in the TrustedCert arrays.
TrustedCertBytesReturns the raw certificate data in DER format.
TrustedCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
UserCountThe number of records in the User arrays.
UserAssociatedDataContains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.
UserBasePathBase path for this user in the server's file system.
UserCertContains the user's certificate.
UserDataContains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.
UserHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
UserHashAlgorithmSpecifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user.
UserIncomingSpeedLimitSpecifies the incoming speed limit for this user.
UserOtpAlgorithmThe algorithm used to generate one-time passwords (OTP) for this user, either HOTP (Hash-based OTP) or TOTP (Time-based OTP).
UserOtpValueThe user's time interval (TOTP) or Counter (HOTP).
UserOutgoingSpeedLimitSpecifies the outgoing speed limit for this user.
UserPasswordThe user's authentication password.
UserPasswordLenSpecifies the length of the user's OTP password.
UserSharedSecretContains the user's secret key, which is essentially a shared secret between the client and server.
UserSSHKeyContains the user's SSH key.
UserUsernameThe registered name (login) of the user.
ValidationLogContains the complete log of the certificate validation routine.
ValidationMomentThe time point at which signature validity is to be established.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting.
ContinueAuthCall this method to process an authentication token and proceed to the next authentication step.
DoActionPerforms an additional action.
StartAuthInitiates an authentication process.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

AuthAttemptResultReports the outcome of an authentication attempt.
AuthAttemptStartSignifies the start of an authentication attempt.
AuthStartSignifies the start of an authentication process.
AuthVerifyRequests the application to validate an authentication token.
CustomAuthStartReports the beginning of a custom authentication method.
ErrorReports information about errors during authentication.
NotificationThis event notifies the application about an underlying control flow event.

Config Settings


The following is a list of config settings for the class with short descriptions. Click on the links for further details.

ForceCompleteChainValidationForTrustedWhether to continue with the full validation up to the root CA certificate for mid-level trust anchors.
IgnoreOCSPNoCheckExtensionWhether the OCSP NoCheck extension should be ignored.
IgnoreSystemTrustWhether trusted Windows Certificate Stores should be treated as trusted.
ImplicitlyTrustSelfSignedCertificatesWhether to trust self-signed certificates.
PromoteLongOCSPResponsesWhether long OCSP responses are requested.
TolerateMinorChainIssuesWhether to tolerate minor chain issues.
UseMicrosoftCTLEnables or disables the automatic use of the Microsoft online certificate trust list.
UseSystemCertificatesEnables or disables the use of the system certificates.
CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the class.
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNSSpecifies whether static DNS rules should be used.
StaticIPAddress[domain]Gets or sets an IP address for the specified domain name.
StaticIPAddressesGets or sets all the static DNS rules.
TagAllows to store any custom data.
TLSSessionGroupSpecifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetimeSpecifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeIntervalSpecifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolverSpecifies whether the client classes should use own DNS resolver.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

AuthInfoAuthLog Property (SecureBlackbox_Authenticator Class)

Contains the authentication log.

Object Oriented Interface


public function getAuthInfoAuthLog();


Procedural Interface


secureblackbox_authenticator_get($res, 1 );


Default Value

''

Remarks

Contains the authentication log. This can be used for accountability purposes.

This property is read-only and not available at design time.

Data Type

String

AuthInfoAuthMethod Property (SecureBlackbox_Authenticator Class)

Contains the current authentication method.

Object Oriented Interface


public function getAuthInfoAuthMethod();


Procedural Interface


secureblackbox_authenticator_get($res, 2 );


Default Value

''

Remarks

Contains the current authentication method.

This property is read-only and not available at design time.

Data Type

String

AuthInfoAuthMethodPars Property (SecureBlackbox_Authenticator Class)

Contains the authentication method parameters.

Object Oriented Interface


public function getAuthInfoAuthMethodPars();


Procedural Interface


secureblackbox_authenticator_get($res, 3 );


Default Value

''

Remarks

Contains the authentication method parameters. These are method-dependent. For example, the dcauth method will have a DC request in this property.

This property is read-only and not available at design time.

Data Type

String

AuthInfoCompletedMethods Property (SecureBlackbox_Authenticator Class)

Contains a comma-separated list of completed authentication methods.

Object Oriented Interface


public function getAuthInfoCompletedMethods();


Procedural Interface


secureblackbox_authenticator_get($res, 4 );


Default Value

''

Remarks

Contains a comma-separated list of completed authentication methods.

This property is read-only and not available at design time.

Data Type

String

AuthInfoLastAuthMessage Property (SecureBlackbox_Authenticator Class)

Contains an uninterpreted authentication message to be displayed to the authenticating user.

Object Oriented Interface


public function getAuthInfoLastAuthMessage();


Procedural Interface


secureblackbox_authenticator_get($res, 5 );


Default Value

''

Remarks

Contains an uninterpreted authentication message to be displayed to the authenticating user.

This property is read-only and not available at design time.

Data Type

String

AuthInfoLastAuthResult Property (SecureBlackbox_Authenticator Class)

Contains the result of the last authentication token validation.

Object Oriented Interface


public function getAuthInfoLastAuthResult();


Procedural Interface


secureblackbox_authenticator_get($res, 6 );


Default Value

-1

Remarks

Contains the result of the last authentication token validation.

This property is read-only and not available at design time.

Data Type

Integer

AuthInfoRemainingMethods Property (SecureBlackbox_Authenticator Class)

Contains a comma-separated list of authentication methods yet to perform.

Object Oriented Interface


public function getAuthInfoRemainingMethods();


Procedural Interface


secureblackbox_authenticator_get($res, 7 );


Default Value

''

Remarks

Contains a comma-separated list of authentication methods yet to perform.

This property is read-only and not available at design time.

Data Type

String

AuthInfoState Property (SecureBlackbox_Authenticator Class)

Contains a state of the overall authentication process.

Object Oriented Interface


public function getAuthInfoState();


Procedural Interface


secureblackbox_authenticator_get($res, 8 );


Default Value

''

Remarks

Contains a state of the overall authentication process. Save the content of this property after calling StartAuth or ContinueAuth to remember the setup of the authenticator control, and pass it to the next ContinueAuth call to resume from the same stage.

This property is read-only and not available at design time.

Data Type

String

AuthInfoUserID Property (SecureBlackbox_Authenticator Class)

Returns the ID of the user being authenticated, as passed to StartAuth .

Object Oriented Interface


public function getAuthInfoUserID();


Procedural Interface


secureblackbox_authenticator_get($res, 9 );


Default Value

''

Remarks

Returns the ID of the user being authenticated, as passed to StartAuth.

This property is read-only and not available at design time.

Data Type

String

BlockedCertCount Property (SecureBlackbox_Authenticator Class)

The number of records in the BlockedCert arrays.

Object Oriented Interface


public function getBlockedCertCount();


public function setBlockedCertCount($value);

Procedural Interface


secureblackbox_authenticator_get($res, 10 );


secureblackbox_authenticator_set($res, 10, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at BlockedCertCount - 1.

This property is not available at design time.

Data Type

Integer

BlockedCertBytes Property (SecureBlackbox_Authenticator Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getBlockedCertBytes($blockedcertindex);


Procedural Interface


secureblackbox_authenticator_get($res, 11 , $blockedcertindex);


Remarks

Returns the raw certificate data in DER format.

The $blockedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

BlockedCertHandle Property (SecureBlackbox_Authenticator Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getBlockedCertHandle($blockedcertindex);


public function setBlockedCertHandle($blockedcertindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 18 , $blockedcertindex);


secureblackbox_authenticator_set($res, 18, $value , $blockedcertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $blockedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is not available at design time.

Data Type

Long64

CertCount Property (SecureBlackbox_Authenticator Class)

The number of records in the Cert arrays.

Object Oriented Interface


public function getCertCount();


Procedural Interface


secureblackbox_authenticator_get($res, 45 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at CertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

CertBytes Property (SecureBlackbox_Authenticator Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getCertBytes($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 46 , $certindex);


Remarks

Returns the raw certificate data in DER format.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertCA Property (SecureBlackbox_Authenticator Class)

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

Object Oriented Interface


public function getCertCA($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 47 , $certindex);


Default Value

false

Remarks

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertCAKeyID Property (SecureBlackbox_Authenticator Class)

A unique identifier (fingerprint) of the CA certificate's private key.

Object Oriented Interface


public function getCertCAKeyID($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 48 , $certindex);


Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertCRLDistributionPoints Property (SecureBlackbox_Authenticator Class)

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Object Oriented Interface


public function getCertCRLDistributionPoints($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 49 , $certindex);


Default Value

''

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertCurve Property (SecureBlackbox_Authenticator Class)

Specifies the elliptic curve of the EC public key.

Object Oriented Interface


public function getCertCurve($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 50 , $certindex);


Default Value

''

Remarks

Specifies the elliptic curve of the EC public key.

SB_EC_SECP112R1SECP112R1
SB_EC_SECP112R2SECP112R2
SB_EC_SECP128R1SECP128R1
SB_EC_SECP128R2SECP128R2
SB_EC_SECP160K1SECP160K1
SB_EC_SECP160R1SECP160R1
SB_EC_SECP160R2SECP160R2
SB_EC_SECP192K1SECP192K1
SB_EC_SECP192R1SECP192R1
SB_EC_SECP224K1SECP224K1
SB_EC_SECP224R1SECP224R1
SB_EC_SECP256K1SECP256K1
SB_EC_SECP256R1SECP256R1
SB_EC_SECP384R1SECP384R1
SB_EC_SECP521R1SECP521R1
SB_EC_SECT113R1SECT113R1
SB_EC_SECT113R2SECT113R2
SB_EC_SECT131R1SECT131R1
SB_EC_SECT131R2SECT131R2
SB_EC_SECT163K1SECT163K1
SB_EC_SECT163R1SECT163R1
SB_EC_SECT163R2SECT163R2
SB_EC_SECT193R1SECT193R1
SB_EC_SECT193R2SECT193R2
SB_EC_SECT233K1SECT233K1
SB_EC_SECT233R1SECT233R1
SB_EC_SECT239K1SECT239K1
SB_EC_SECT283K1SECT283K1
SB_EC_SECT283R1SECT283R1
SB_EC_SECT409K1SECT409K1
SB_EC_SECT409R1SECT409R1
SB_EC_SECT571K1SECT571K1
SB_EC_SECT571R1SECT571R1
SB_EC_PRIME192V1PRIME192V1
SB_EC_PRIME192V2PRIME192V2
SB_EC_PRIME192V3PRIME192V3
SB_EC_PRIME239V1PRIME239V1
SB_EC_PRIME239V2PRIME239V2
SB_EC_PRIME239V3PRIME239V3
SB_EC_PRIME256V1PRIME256V1
SB_EC_C2PNB163V1C2PNB163V1
SB_EC_C2PNB163V2C2PNB163V2
SB_EC_C2PNB163V3C2PNB163V3
SB_EC_C2PNB176W1C2PNB176W1
SB_EC_C2TNB191V1C2TNB191V1
SB_EC_C2TNB191V2C2TNB191V2
SB_EC_C2TNB191V3C2TNB191V3
SB_EC_C2ONB191V4C2ONB191V4
SB_EC_C2ONB191V5C2ONB191V5
SB_EC_C2PNB208W1C2PNB208W1
SB_EC_C2TNB239V1C2TNB239V1
SB_EC_C2TNB239V2C2TNB239V2
SB_EC_C2TNB239V3C2TNB239V3
SB_EC_C2ONB239V4C2ONB239V4
SB_EC_C2ONB239V5C2ONB239V5
SB_EC_C2PNB272W1C2PNB272W1
SB_EC_C2PNB304W1C2PNB304W1
SB_EC_C2TNB359V1C2TNB359V1
SB_EC_C2PNB368W1C2PNB368W1
SB_EC_C2TNB431R1C2TNB431R1
SB_EC_NISTP192NISTP192
SB_EC_NISTP224NISTP224
SB_EC_NISTP256NISTP256
SB_EC_NISTP384NISTP384
SB_EC_NISTP521NISTP521
SB_EC_NISTB163NISTB163
SB_EC_NISTB233NISTB233
SB_EC_NISTB283NISTB283
SB_EC_NISTB409NISTB409
SB_EC_NISTB571NISTB571
SB_EC_NISTK163NISTK163
SB_EC_NISTK233NISTK233
SB_EC_NISTK283NISTK283
SB_EC_NISTK409NISTK409
SB_EC_NISTK571NISTK571
SB_EC_GOSTCPTESTGOSTCPTEST
SB_EC_GOSTCPAGOSTCPA
SB_EC_GOSTCPBGOSTCPB
SB_EC_GOSTCPCGOSTCPC
SB_EC_GOSTCPXCHAGOSTCPXCHA
SB_EC_GOSTCPXCHBGOSTCPXCHB
SB_EC_BRAINPOOLP160R1BRAINPOOLP160R1
SB_EC_BRAINPOOLP160T1BRAINPOOLP160T1
SB_EC_BRAINPOOLP192R1BRAINPOOLP192R1
SB_EC_BRAINPOOLP192T1BRAINPOOLP192T1
SB_EC_BRAINPOOLP224R1BRAINPOOLP224R1
SB_EC_BRAINPOOLP224T1BRAINPOOLP224T1
SB_EC_BRAINPOOLP256R1BRAINPOOLP256R1
SB_EC_BRAINPOOLP256T1BRAINPOOLP256T1
SB_EC_BRAINPOOLP320R1BRAINPOOLP320R1
SB_EC_BRAINPOOLP320T1BRAINPOOLP320T1
SB_EC_BRAINPOOLP384R1BRAINPOOLP384R1
SB_EC_BRAINPOOLP384T1BRAINPOOLP384T1
SB_EC_BRAINPOOLP512R1BRAINPOOLP512R1
SB_EC_BRAINPOOLP512T1BRAINPOOLP512T1
SB_EC_CURVE25519CURVE25519
SB_EC_CURVE448CURVE448

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertFingerprint Property (SecureBlackbox_Authenticator Class)

Contains the fingerprint (a hash imprint) of this certificate.

Object Oriented Interface


public function getCertFingerprint($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 51 , $certindex);


Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertFriendlyName Property (SecureBlackbox_Authenticator Class)

Contains an associated alias (friendly name) of the certificate.

Object Oriented Interface


public function getCertFriendlyName($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 52 , $certindex);


Default Value

''

Remarks

Contains an associated alias (friendly name) of the certificate.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertHandle Property (SecureBlackbox_Authenticator Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getCertHandle($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 53 , $certindex);


Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Long64

CertHashAlgorithm Property (SecureBlackbox_Authenticator Class)

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .

Object Oriented Interface


public function getCertHashAlgorithm($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 54 , $certindex);


Default Value

''

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertIssuer Property (SecureBlackbox_Authenticator Class)

The common name of the certificate issuer (CA), typically a company name.

Object Oriented Interface


public function getCertIssuer($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 55 , $certindex);


Default Value

''

Remarks

The common name of the certificate issuer (CA), typically a company name.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertIssuerRDN Property (SecureBlackbox_Authenticator Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Object Oriented Interface


public function getCertIssuerRDN($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 56 , $certindex);


Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertKeyAlgorithm Property (SecureBlackbox_Authenticator Class)

Specifies the public key algorithm of this certificate.

Object Oriented Interface


public function getCertKeyAlgorithm($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 57 , $certindex);


Default Value

'0'

Remarks

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertKeyBits Property (SecureBlackbox_Authenticator Class)

Returns the length of the public key.

Object Oriented Interface


public function getCertKeyBits($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 58 , $certindex);


Default Value

0

Remarks

Returns the length of the public key.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Integer

CertKeyFingerprint Property (SecureBlackbox_Authenticator Class)

Returns a fingerprint of the public key contained in the certificate.

Object Oriented Interface


public function getCertKeyFingerprint($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 59 , $certindex);


Remarks

Returns a fingerprint of the public key contained in the certificate.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertKeyUsage Property (SecureBlackbox_Authenticator Class)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Object Oriented Interface


public function getCertKeyUsage($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 60 , $certindex);


Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Integer

CertKeyValid Property (SecureBlackbox_Authenticator Class)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Object Oriented Interface


public function getCertKeyValid($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 61 , $certindex);


Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertOCSPLocations Property (SecureBlackbox_Authenticator Class)

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Object Oriented Interface


public function getCertOCSPLocations($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 62 , $certindex);


Default Value

''

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertPolicyIDs Property (SecureBlackbox_Authenticator Class)

Contains identifiers (OIDs) of the applicable certificate policies.

Object Oriented Interface


public function getCertPolicyIDs($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 65 , $certindex);


Default Value

''

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertPublicKeyBytes Property (SecureBlackbox_Authenticator Class)

Contains the certificate's public key in DER format.

Object Oriented Interface


public function getCertPublicKeyBytes($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 69 , $certindex);


Remarks

Contains the certificate's public key in DER format.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSelfSigned Property (SecureBlackbox_Authenticator Class)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Object Oriented Interface


public function getCertSelfSigned($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 71 , $certindex);


Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertSerialNumber Property (SecureBlackbox_Authenticator Class)

Returns the certificate's serial number.

Object Oriented Interface


public function getCertSerialNumber($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 72 , $certindex);


Remarks

Returns the certificate's serial number.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSigAlgorithm Property (SecureBlackbox_Authenticator Class)

Indicates the algorithm that was used by the CA to sign this certificate.

Object Oriented Interface


public function getCertSigAlgorithm($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 73 , $certindex);


Default Value

''

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertSubject Property (SecureBlackbox_Authenticator Class)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Object Oriented Interface


public function getCertSubject($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 74 , $certindex);


Default Value

''

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertSubjectKeyID Property (SecureBlackbox_Authenticator Class)

Contains a unique identifier (fingerprint) of the certificate's private key.

Object Oriented Interface


public function getCertSubjectKeyID($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 76 , $certindex);


Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSubjectRDN Property (SecureBlackbox_Authenticator Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Object Oriented Interface


public function getCertSubjectRDN($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 77 , $certindex);


Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertValidFrom Property (SecureBlackbox_Authenticator Class)

The time point at which the certificate becomes valid, in UTC.

Object Oriented Interface


public function getCertValidFrom($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 78 , $certindex);


Default Value

''

Remarks

The time point at which the certificate becomes valid, in UTC.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertValidTo Property (SecureBlackbox_Authenticator Class)

The time point at which the certificate expires, in UTC.

Object Oriented Interface


public function getCertValidTo($certindex);


Procedural Interface


secureblackbox_authenticator_get($res, 79 , $certindex);


Default Value

''

Remarks

The time point at which the certificate expires, in UTC.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

ChainValidationDetails Property (SecureBlackbox_Authenticator Class)

The details of a certificate chain validation outcome.

Object Oriented Interface


public function getChainValidationDetails();


Procedural Interface


secureblackbox_authenticator_get($res, 80 );


Default Value

0

Remarks

Use the value(s) returned by this property to identify the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

This property is read-only and not available at design time.

Data Type

Integer

ChainValidationResult Property (SecureBlackbox_Authenticator Class)

The general outcome of a certificate chain validation routine. Use ChainValidationDetails to get information about the reasons that contributed to the validation result.

Object Oriented Interface


public function getChainValidationResult();


Procedural Interface


secureblackbox_authenticator_get($res, 81 );


Default Value

0

Remarks

Available options:

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

This property is read-only and not available at design time.

Data Type

Integer

DefaultAuthMethods Property (SecureBlackbox_Authenticator Class)

Contains the list of default authentication methods.

Object Oriented Interface


public function getDefaultAuthMethods();


public function setDefaultAuthMethods($value);

Procedural Interface


secureblackbox_authenticator_get($res, 82 );


secureblackbox_authenticator_set($res, 82, $value );

Default Value

''

Remarks

Use this property to specify a list of default authentication methods to apply to users that are not included in the Users database. Assign this property with a comma-separated list of standard and custom authentication methods.

The following standard authentication methods are supported by the component:

  • password
  • otp-h
  • otp-t
  • dcauth

You can use any names not clashing with the standard methods to indicate your own custom authentication methods. Use CustomAuthStart and AuthVerify events to handle custom authentication methods.

Data Type

String

ExternalCryptoAsyncDocumentID Property (SecureBlackbox_Authenticator Class)

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Object Oriented Interface


public function getExternalCryptoAsyncDocumentID();


public function setExternalCryptoAsyncDocumentID($value);

Procedural Interface


secureblackbox_authenticator_get($res, 83 );


secureblackbox_authenticator_set($res, 83, $value );

Default Value

''

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

Data Type

String

ExternalCryptoCustomParams Property (SecureBlackbox_Authenticator Class)

Custom parameters to be passed to the signing service (uninterpreted).

Object Oriented Interface


public function getExternalCryptoCustomParams();


public function setExternalCryptoCustomParams($value);

Procedural Interface


secureblackbox_authenticator_get($res, 84 );


secureblackbox_authenticator_set($res, 84, $value );

Default Value

''

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

This property is not available at design time.

Data Type

String

ExternalCryptoData Property (SecureBlackbox_Authenticator Class)

Additional data to be included in the async state and mirrored back by the requestor.

Object Oriented Interface


public function getExternalCryptoData();


public function setExternalCryptoData($value);

Procedural Interface


secureblackbox_authenticator_get($res, 85 );


secureblackbox_authenticator_set($res, 85, $value );

Default Value

''

Remarks

Additional data to be included in the async state and mirrored back by the requestor.

This property is not available at design time.

Data Type

String

ExternalCryptoExternalHashCalculation Property (SecureBlackbox_Authenticator Class)

Specifies whether the message hash is to be calculated at the external endpoint.

Object Oriented Interface


public function getExternalCryptoExternalHashCalculation();


public function setExternalCryptoExternalHashCalculation($value);

Procedural Interface


secureblackbox_authenticator_get($res, 86 );


secureblackbox_authenticator_set($res, 86, $value );

Default Value

false

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.

If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

Data Type

Boolean

ExternalCryptoHashAlgorithm Property (SecureBlackbox_Authenticator Class)

Specifies the request's signature hash algorithm.

Object Oriented Interface


public function getExternalCryptoHashAlgorithm();


public function setExternalCryptoHashAlgorithm($value);

Procedural Interface


secureblackbox_authenticator_get($res, 87 );


secureblackbox_authenticator_set($res, 87, $value );

Default Value

'SHA256'

Remarks

Specifies the request's signature hash algorithm.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

Data Type

String

ExternalCryptoKeyID Property (SecureBlackbox_Authenticator Class)

The ID of the pre-shared key used for DC request authentication.

Object Oriented Interface


public function getExternalCryptoKeyID();


public function setExternalCryptoKeyID($value);

Procedural Interface


secureblackbox_authenticator_get($res, 88 );


secureblackbox_authenticator_set($res, 88, $value );

Default Value

''

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use ExternalCryptoKeySecret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

Data Type

String

ExternalCryptoKeySecret Property (SecureBlackbox_Authenticator Class)

The pre-shared key used for DC request authentication.

Object Oriented Interface


public function getExternalCryptoKeySecret();


public function setExternalCryptoKeySecret($value);

Procedural Interface


secureblackbox_authenticator_get($res, 89 );


secureblackbox_authenticator_set($res, 89, $value );

Default Value

''

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the ExternalCryptoKeyID topic.

Data Type

String

ExternalCryptoMethod Property (SecureBlackbox_Authenticator Class)

Specifies the asynchronous signing method.

Object Oriented Interface


public function getExternalCryptoMethod();


public function setExternalCryptoMethod($value);

Procedural Interface


secureblackbox_authenticator_get($res, 90 );


secureblackbox_authenticator_set($res, 90, $value );

Default Value

0

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

asmdPKCS10
asmdPKCS71

Data Type

Integer

ExternalCryptoMode Property (SecureBlackbox_Authenticator Class)

Specifies the external cryptography mode.

Object Oriented Interface


public function getExternalCryptoMode();


public function setExternalCryptoMode($value);

Procedural Interface


secureblackbox_authenticator_get($res, 91 );


secureblackbox_authenticator_set($res, 91, $value );

Default Value

0

Remarks

Specifies the external cryptography mode.

Available options:

ecmDefaultThe default value (0)
ecmDisabledDo not use DC or external signing (1)
ecmGenericGeneric external signing with the OnExternalSign event (2)
ecmDCAuthDCAuth signing (3)
ecmDCAuthJSONDCAuth signing in JSON format (4)

This property is not available at design time.

Data Type

Integer

ExternalCryptoPublicKeyAlgorithm Property (SecureBlackbox_Authenticator Class)

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

Object Oriented Interface


public function getExternalCryptoPublicKeyAlgorithm();


public function setExternalCryptoPublicKeyAlgorithm($value);

Procedural Interface


secureblackbox_authenticator_get($res, 92 );


secureblackbox_authenticator_set($res, 92, $value );

Default Value

''

Remarks

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

Data Type

String

FIPSMode Property (SecureBlackbox_Authenticator Class)

Reserved.

Object Oriented Interface


public function getFIPSMode();


public function setFIPSMode($value);

Procedural Interface


secureblackbox_authenticator_get($res, 93 );


secureblackbox_authenticator_set($res, 93, $value );

Default Value

false

Remarks

This property is reserved for future use.

Data Type

Boolean

IgnoreChainValidationErrors Property (SecureBlackbox_Authenticator Class)

Makes the class tolerant to chain validation errors.

Object Oriented Interface


public function getIgnoreChainValidationErrors();


public function setIgnoreChainValidationErrors($value);

Procedural Interface


secureblackbox_authenticator_get($res, 94 );


secureblackbox_authenticator_set($res, 94, $value );

Default Value

false

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

Data Type

Boolean

KnownCertCount Property (SecureBlackbox_Authenticator Class)

The number of records in the KnownCert arrays.

Object Oriented Interface


public function getKnownCertCount();


public function setKnownCertCount($value);

Procedural Interface


secureblackbox_authenticator_get($res, 95 );


secureblackbox_authenticator_set($res, 95, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KnownCertCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCertBytes Property (SecureBlackbox_Authenticator Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getKnownCertBytes($knowncertindex);


Procedural Interface


secureblackbox_authenticator_get($res, 96 , $knowncertindex);


Remarks

Returns the raw certificate data in DER format.

The $knowncertindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCertHandle Property (SecureBlackbox_Authenticator Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getKnownCertHandle($knowncertindex);


public function setKnownCertHandle($knowncertindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 103 , $knowncertindex);


secureblackbox_authenticator_set($res, 103, $value , $knowncertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $knowncertindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is not available at design time.

Data Type

Long64

KnownCRLCount Property (SecureBlackbox_Authenticator Class)

The number of records in the KnownCRL arrays.

Object Oriented Interface


public function getKnownCRLCount();


public function setKnownCRLCount($value);

Procedural Interface


secureblackbox_authenticator_get($res, 130 );


secureblackbox_authenticator_set($res, 130, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KnownCRLCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCRLBytes Property (SecureBlackbox_Authenticator Class)

Returns the raw CRL data in DER format.

Object Oriented Interface


public function getKnownCRLBytes($knowncrlindex);


Procedural Interface


secureblackbox_authenticator_get($res, 131 , $knowncrlindex);


Remarks

Returns the raw CRL data in DER format.

The $knowncrlindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCRLHandle Property (SecureBlackbox_Authenticator Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getKnownCRLHandle($knowncrlindex);


public function setKnownCRLHandle($knowncrlindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 134 , $knowncrlindex);


secureblackbox_authenticator_set($res, 134, $value , $knowncrlindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $knowncrlindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is not available at design time.

Data Type

Long64

KnownOCSPCount Property (SecureBlackbox_Authenticator Class)

The number of records in the KnownOCSP arrays.

Object Oriented Interface


public function getKnownOCSPCount();


public function setKnownOCSPCount($value);

Procedural Interface


secureblackbox_authenticator_get($res, 142 );


secureblackbox_authenticator_set($res, 142, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KnownOCSPCount - 1.

This property is not available at design time.

Data Type

Integer

KnownOCSPBytes Property (SecureBlackbox_Authenticator Class)

A buffer containing the raw OCSP response data.

Object Oriented Interface


public function getKnownOCSPBytes($knownocspindex);


Procedural Interface


secureblackbox_authenticator_get($res, 143 , $knownocspindex);


Remarks

A buffer containing the raw OCSP response data.

The $knownocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownOCSPHandle Property (SecureBlackbox_Authenticator Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getKnownOCSPHandle($knownocspindex);


public function setKnownOCSPHandle($knownocspindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 145 , $knownocspindex);


secureblackbox_authenticator_set($res, 145, $value , $knownocspindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $knownocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is not available at design time.

Data Type

Long64

OfflineMode Property (SecureBlackbox_Authenticator Class)

Switches the class to offline mode.

Object Oriented Interface


public function getOfflineMode();


public function setOfflineMode($value);

Procedural Interface


secureblackbox_authenticator_get($res, 150 );


secureblackbox_authenticator_set($res, 150, $value );

Default Value

false

Remarks

When working in offline mode, the class restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

Data Type

Boolean

ProxyAddress Property (SecureBlackbox_Authenticator Class)

The IP address of the proxy server.

Object Oriented Interface


public function getProxyAddress();


public function setProxyAddress($value);

Procedural Interface


secureblackbox_authenticator_get($res, 151 );


secureblackbox_authenticator_set($res, 151, $value );

Default Value

''

Remarks

The IP address of the proxy server.

Data Type

String

ProxyAuthentication Property (SecureBlackbox_Authenticator Class)

The authentication type used by the proxy server.

Object Oriented Interface


public function getProxyAuthentication();


public function setProxyAuthentication($value);

Procedural Interface


secureblackbox_authenticator_get($res, 152 );


secureblackbox_authenticator_set($res, 152, $value );

Default Value

0

Remarks

The authentication type used by the proxy server.

patNoAuthentication0
patBasic1
patDigest2
patNTLM3

Data Type

Integer

ProxyPassword Property (SecureBlackbox_Authenticator Class)

The password to authenticate to the proxy server.

Object Oriented Interface


public function getProxyPassword();


public function setProxyPassword($value);

Procedural Interface


secureblackbox_authenticator_get($res, 153 );


secureblackbox_authenticator_set($res, 153, $value );

Default Value

''

Remarks

The password to authenticate to the proxy server.

Data Type

String

ProxyPort Property (SecureBlackbox_Authenticator Class)

The port on the proxy server to connect to.

Object Oriented Interface


public function getProxyPort();


public function setProxyPort($value);

Procedural Interface


secureblackbox_authenticator_get($res, 154 );


secureblackbox_authenticator_set($res, 154, $value );

Default Value

0

Remarks

The port on the proxy server to connect to.

Data Type

Integer

ProxyProxyType Property (SecureBlackbox_Authenticator Class)

The type of the proxy server.

Object Oriented Interface


public function getProxyProxyType();


public function setProxyProxyType($value);

Procedural Interface


secureblackbox_authenticator_get($res, 155 );


secureblackbox_authenticator_set($res, 155, $value );

Default Value

0

Remarks

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.

cptNone0
cptSocks41
cptSocks52
cptWebTunnel3
cptHTTP4

Data Type

Integer

ProxyRequestHeaders Property (SecureBlackbox_Authenticator Class)

Contains HTTP request headers for WebTunnel and HTTP proxy.

Object Oriented Interface


public function getProxyRequestHeaders();


public function setProxyRequestHeaders($value);

Procedural Interface


secureblackbox_authenticator_get($res, 156 );


secureblackbox_authenticator_set($res, 156, $value );

Default Value

''

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

Data Type

String

ProxyResponseBody Property (SecureBlackbox_Authenticator Class)

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Object Oriented Interface


public function getProxyResponseBody();


public function setProxyResponseBody($value);

Procedural Interface


secureblackbox_authenticator_get($res, 157 );


secureblackbox_authenticator_set($res, 157, $value );

Default Value

''

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Data Type

String

ProxyResponseHeaders Property (SecureBlackbox_Authenticator Class)

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Object Oriented Interface


public function getProxyResponseHeaders();


public function setProxyResponseHeaders($value);

Procedural Interface


secureblackbox_authenticator_get($res, 158 );


secureblackbox_authenticator_set($res, 158, $value );

Default Value

''

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Data Type

String

ProxyUseIPv6 Property (SecureBlackbox_Authenticator Class)

Specifies whether IPv6 should be used when connecting through the proxy.

Object Oriented Interface


public function getProxyUseIPv6();


public function setProxyUseIPv6($value);

Procedural Interface


secureblackbox_authenticator_get($res, 159 );


secureblackbox_authenticator_set($res, 159, $value );

Default Value

false

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

Data Type

Boolean

ProxyUseProxy Property (SecureBlackbox_Authenticator Class)

Enables or disables proxy-driven connection.

Object Oriented Interface


public function getProxyUseProxy();


public function setProxyUseProxy($value);

Procedural Interface


secureblackbox_authenticator_get($res, 160 );


secureblackbox_authenticator_set($res, 160, $value );

Default Value

false

Remarks

Enables or disables proxy-driven connection.

Data Type

Boolean

ProxyUsername Property (SecureBlackbox_Authenticator Class)

Specifies the username credential for proxy authentication.

Object Oriented Interface


public function getProxyUsername();


public function setProxyUsername($value);

Procedural Interface


secureblackbox_authenticator_get($res, 161 );


secureblackbox_authenticator_set($res, 161, $value );

Default Value

''

Remarks

Specifies the username credential for proxy authentication.

Data Type

String

RevocationCheck Property (SecureBlackbox_Authenticator Class)

Specifies the kind(s) of revocation check to perform for all chain certificates.

Object Oriented Interface


public function getRevocationCheck();


public function setRevocationCheck($value);

Procedural Interface


secureblackbox_authenticator_get($res, 162 );


secureblackbox_authenticator_set($res, 162, $value );

Default Value

1

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.

crcNone0No revocation checking.
crcAuto1Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL2All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP3All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP4All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL5All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP6All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP7All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL8All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

Data Type

Integer

SigningCertBytes Property (SecureBlackbox_Authenticator Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getSigningCertBytes();


Procedural Interface


secureblackbox_authenticator_get($res, 163 );


Remarks

Returns the raw certificate data in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertHandle Property (SecureBlackbox_Authenticator Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getSigningCertHandle();


public function setSigningCertHandle($value);

Procedural Interface


secureblackbox_authenticator_get($res, 170 );


secureblackbox_authenticator_set($res, 170, $value );

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

This property is not available at design time.

Data Type

Long64

SocketDNSMode Property (SecureBlackbox_Authenticator Class)

Selects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.

Object Oriented Interface


public function getSocketDNSMode();


public function setSocketDNSMode($value);

Procedural Interface


secureblackbox_authenticator_get($res, 197 );


secureblackbox_authenticator_set($res, 197, $value );

Default Value

0

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

dmAuto0
dmPlatform1
dmOwn2
dmOwnSecure3

Data Type

Integer

SocketDNSPort Property (SecureBlackbox_Authenticator Class)

Specifies the port number to be used for sending queries to the DNS server.

Object Oriented Interface


public function getSocketDNSPort();


public function setSocketDNSPort($value);

Procedural Interface


secureblackbox_authenticator_get($res, 198 );


secureblackbox_authenticator_set($res, 198, $value );

Default Value

0

Remarks

Specifies the port number to be used for sending queries to the DNS server.

Data Type

Integer

SocketDNSQueryTimeout Property (SecureBlackbox_Authenticator Class)

The timeout (in milliseconds) for each DNS query.

Object Oriented Interface


public function getSocketDNSQueryTimeout();


public function setSocketDNSQueryTimeout($value);

Procedural Interface


secureblackbox_authenticator_get($res, 199 );


secureblackbox_authenticator_set($res, 199, $value );

Default Value

0

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketDNSServers Property (SecureBlackbox_Authenticator Class)

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Object Oriented Interface


public function getSocketDNSServers();


public function setSocketDNSServers($value);

Procedural Interface


secureblackbox_authenticator_get($res, 200 );


secureblackbox_authenticator_set($res, 200, $value );

Default Value

''

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Data Type

String

SocketDNSTotalTimeout Property (SecureBlackbox_Authenticator Class)

The timeout (in milliseconds) for the whole resolution process.

Object Oriented Interface


public function getSocketDNSTotalTimeout();


public function setSocketDNSTotalTimeout($value);

Procedural Interface


secureblackbox_authenticator_get($res, 201 );


secureblackbox_authenticator_set($res, 201, $value );

Default Value

0

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketIncomingSpeedLimit Property (SecureBlackbox_Authenticator Class)

The maximum number of bytes to read from the socket, per second.

Object Oriented Interface


public function getSocketIncomingSpeedLimit();


public function setSocketIncomingSpeedLimit($value);

Procedural Interface


secureblackbox_authenticator_get($res, 202 );


secureblackbox_authenticator_set($res, 202, $value );

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

Data Type

Integer

SocketLocalAddress Property (SecureBlackbox_Authenticator Class)

The local network interface to bind the socket to.

Object Oriented Interface


public function getSocketLocalAddress();


public function setSocketLocalAddress($value);

Procedural Interface


secureblackbox_authenticator_get($res, 203 );


secureblackbox_authenticator_set($res, 203, $value );

Default Value

''

Remarks

The local network interface to bind the socket to.

Data Type

String

SocketLocalPort Property (SecureBlackbox_Authenticator Class)

The local port number to bind the socket to.

Object Oriented Interface


public function getSocketLocalPort();


public function setSocketLocalPort($value);

Procedural Interface


secureblackbox_authenticator_get($res, 204 );


secureblackbox_authenticator_set($res, 204, $value );

Default Value

0

Remarks

The local port number to bind the socket to.

Data Type

Integer

SocketOutgoingSpeedLimit Property (SecureBlackbox_Authenticator Class)

The maximum number of bytes to write to the socket, per second.

Object Oriented Interface


public function getSocketOutgoingSpeedLimit();


public function setSocketOutgoingSpeedLimit($value);

Procedural Interface


secureblackbox_authenticator_get($res, 205 );


secureblackbox_authenticator_set($res, 205, $value );

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

Data Type

Integer

SocketTimeout Property (SecureBlackbox_Authenticator Class)

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Object Oriented Interface


public function getSocketTimeout();


public function setSocketTimeout($value);

Procedural Interface


secureblackbox_authenticator_get($res, 206 );


secureblackbox_authenticator_set($res, 206, $value );

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

Data Type

Integer

SocketUseIPv6 Property (SecureBlackbox_Authenticator Class)

Enables or disables IP protocol version 6.

Object Oriented Interface


public function getSocketUseIPv6();


public function setSocketUseIPv6($value);

Procedural Interface


secureblackbox_authenticator_get($res, 207 );


secureblackbox_authenticator_set($res, 207, $value );

Default Value

false

Remarks

Enables or disables IP protocol version 6.

Data Type

Boolean

TLSAutoValidateCertificates Property (SecureBlackbox_Authenticator Class)

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Object Oriented Interface


public function getTLSAutoValidateCertificates();


public function setTLSAutoValidateCertificates($value);

Procedural Interface


secureblackbox_authenticator_get($res, 208 );


secureblackbox_authenticator_set($res, 208, $value );

Default Value

true

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Data Type

Boolean

TLSBaseConfiguration Property (SecureBlackbox_Authenticator Class)

Selects the base configuration for the TLS settings.

Object Oriented Interface


public function getTLSBaseConfiguration();


public function setTLSBaseConfiguration($value);

Procedural Interface


secureblackbox_authenticator_get($res, 209 );


secureblackbox_authenticator_set($res, 209, $value );

Default Value

0

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.

stpcDefault0
stpcCompatible1
stpcComprehensiveInsecure2
stpcHighlySecure3

Data Type

Integer

TLSCiphersuites Property (SecureBlackbox_Authenticator Class)

A list of ciphersuites separated with commas or semicolons.

Object Oriented Interface


public function getTLSCiphersuites();


public function setTLSCiphersuites($value);

Procedural Interface


secureblackbox_authenticator_get($res, 210 );


secureblackbox_authenticator_set($res, 210, $value );

Default Value

''

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by TLSBaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

  • NULL_NULL_NULL
  • RSA_NULL_MD5
  • RSA_NULL_SHA
  • RSA_RC4_MD5
  • RSA_RC4_SHA
  • RSA_RC2_MD5
  • RSA_IDEA_MD5
  • RSA_IDEA_SHA
  • RSA_DES_MD5
  • RSA_DES_SHA
  • RSA_3DES_MD5
  • RSA_3DES_SHA
  • RSA_AES128_SHA
  • RSA_AES256_SHA
  • DH_DSS_DES_SHA
  • DH_DSS_3DES_SHA
  • DH_DSS_AES128_SHA
  • DH_DSS_AES256_SHA
  • DH_RSA_DES_SHA
  • DH_RSA_3DES_SHA
  • DH_RSA_AES128_SHA
  • DH_RSA_AES256_SHA
  • DHE_DSS_DES_SHA
  • DHE_DSS_3DES_SHA
  • DHE_DSS_AES128_SHA
  • DHE_DSS_AES256_SHA
  • DHE_RSA_DES_SHA
  • DHE_RSA_3DES_SHA
  • DHE_RSA_AES128_SHA
  • DHE_RSA_AES256_SHA
  • DH_ANON_RC4_MD5
  • DH_ANON_DES_SHA
  • DH_ANON_3DES_SHA
  • DH_ANON_AES128_SHA
  • DH_ANON_AES256_SHA
  • RSA_RC2_MD5_EXPORT
  • RSA_RC4_MD5_EXPORT
  • RSA_DES_SHA_EXPORT
  • DH_DSS_DES_SHA_EXPORT
  • DH_RSA_DES_SHA_EXPORT
  • DHE_DSS_DES_SHA_EXPORT
  • DHE_RSA_DES_SHA_EXPORT
  • DH_ANON_RC4_MD5_EXPORT
  • DH_ANON_DES_SHA_EXPORT
  • RSA_CAMELLIA128_SHA
  • DH_DSS_CAMELLIA128_SHA
  • DH_RSA_CAMELLIA128_SHA
  • DHE_DSS_CAMELLIA128_SHA
  • DHE_RSA_CAMELLIA128_SHA
  • DH_ANON_CAMELLIA128_SHA
  • RSA_CAMELLIA256_SHA
  • DH_DSS_CAMELLIA256_SHA
  • DH_RSA_CAMELLIA256_SHA
  • DHE_DSS_CAMELLIA256_SHA
  • DHE_RSA_CAMELLIA256_SHA
  • DH_ANON_CAMELLIA256_SHA
  • PSK_RC4_SHA
  • PSK_3DES_SHA
  • PSK_AES128_SHA
  • PSK_AES256_SHA
  • DHE_PSK_RC4_SHA
  • DHE_PSK_3DES_SHA
  • DHE_PSK_AES128_SHA
  • DHE_PSK_AES256_SHA
  • RSA_PSK_RC4_SHA
  • RSA_PSK_3DES_SHA
  • RSA_PSK_AES128_SHA
  • RSA_PSK_AES256_SHA
  • RSA_SEED_SHA
  • DH_DSS_SEED_SHA
  • DH_RSA_SEED_SHA
  • DHE_DSS_SEED_SHA
  • DHE_RSA_SEED_SHA
  • DH_ANON_SEED_SHA
  • SRP_SHA_3DES_SHA
  • SRP_SHA_RSA_3DES_SHA
  • SRP_SHA_DSS_3DES_SHA
  • SRP_SHA_AES128_SHA
  • SRP_SHA_RSA_AES128_SHA
  • SRP_SHA_DSS_AES128_SHA
  • SRP_SHA_AES256_SHA
  • SRP_SHA_RSA_AES256_SHA
  • SRP_SHA_DSS_AES256_SHA
  • ECDH_ECDSA_NULL_SHA
  • ECDH_ECDSA_RC4_SHA
  • ECDH_ECDSA_3DES_SHA
  • ECDH_ECDSA_AES128_SHA
  • ECDH_ECDSA_AES256_SHA
  • ECDHE_ECDSA_NULL_SHA
  • ECDHE_ECDSA_RC4_SHA
  • ECDHE_ECDSA_3DES_SHA
  • ECDHE_ECDSA_AES128_SHA
  • ECDHE_ECDSA_AES256_SHA
  • ECDH_RSA_NULL_SHA
  • ECDH_RSA_RC4_SHA
  • ECDH_RSA_3DES_SHA
  • ECDH_RSA_AES128_SHA
  • ECDH_RSA_AES256_SHA
  • ECDHE_RSA_NULL_SHA
  • ECDHE_RSA_RC4_SHA
  • ECDHE_RSA_3DES_SHA
  • ECDHE_RSA_AES128_SHA
  • ECDHE_RSA_AES256_SHA
  • ECDH_ANON_NULL_SHA
  • ECDH_ANON_RC4_SHA
  • ECDH_ANON_3DES_SHA
  • ECDH_ANON_AES128_SHA
  • ECDH_ANON_AES256_SHA
  • RSA_NULL_SHA256
  • RSA_AES128_SHA256
  • RSA_AES256_SHA256
  • DH_DSS_AES128_SHA256
  • DH_RSA_AES128_SHA256
  • DHE_DSS_AES128_SHA256
  • DHE_RSA_AES128_SHA256
  • DH_DSS_AES256_SHA256
  • DH_RSA_AES256_SHA256
  • DHE_DSS_AES256_SHA256
  • DHE_RSA_AES256_SHA256
  • DH_ANON_AES128_SHA256
  • DH_ANON_AES256_SHA256
  • RSA_AES128_GCM_SHA256
  • RSA_AES256_GCM_SHA384
  • DHE_RSA_AES128_GCM_SHA256
  • DHE_RSA_AES256_GCM_SHA384
  • DH_RSA_AES128_GCM_SHA256
  • DH_RSA_AES256_GCM_SHA384
  • DHE_DSS_AES128_GCM_SHA256
  • DHE_DSS_AES256_GCM_SHA384
  • DH_DSS_AES128_GCM_SHA256
  • DH_DSS_AES256_GCM_SHA384
  • DH_ANON_AES128_GCM_SHA256
  • DH_ANON_AES256_GCM_SHA384
  • ECDHE_ECDSA_AES128_SHA256
  • ECDHE_ECDSA_AES256_SHA384
  • ECDH_ECDSA_AES128_SHA256
  • ECDH_ECDSA_AES256_SHA384
  • ECDHE_RSA_AES128_SHA256
  • ECDHE_RSA_AES256_SHA384
  • ECDH_RSA_AES128_SHA256
  • ECDH_RSA_AES256_SHA384
  • ECDHE_ECDSA_AES128_GCM_SHA256
  • ECDHE_ECDSA_AES256_GCM_SHA384
  • ECDH_ECDSA_AES128_GCM_SHA256
  • ECDH_ECDSA_AES256_GCM_SHA384
  • ECDHE_RSA_AES128_GCM_SHA256
  • ECDHE_RSA_AES256_GCM_SHA384
  • ECDH_RSA_AES128_GCM_SHA256
  • ECDH_RSA_AES256_GCM_SHA384
  • PSK_AES128_GCM_SHA256
  • PSK_AES256_GCM_SHA384
  • DHE_PSK_AES128_GCM_SHA256
  • DHE_PSK_AES256_GCM_SHA384
  • RSA_PSK_AES128_GCM_SHA256
  • RSA_PSK_AES256_GCM_SHA384
  • PSK_AES128_SHA256
  • PSK_AES256_SHA384
  • PSK_NULL_SHA256
  • PSK_NULL_SHA384
  • DHE_PSK_AES128_SHA256
  • DHE_PSK_AES256_SHA384
  • DHE_PSK_NULL_SHA256
  • DHE_PSK_NULL_SHA384
  • RSA_PSK_AES128_SHA256
  • RSA_PSK_AES256_SHA384
  • RSA_PSK_NULL_SHA256
  • RSA_PSK_NULL_SHA384
  • RSA_CAMELLIA128_SHA256
  • DH_DSS_CAMELLIA128_SHA256
  • DH_RSA_CAMELLIA128_SHA256
  • DHE_DSS_CAMELLIA128_SHA256
  • DHE_RSA_CAMELLIA128_SHA256
  • DH_ANON_CAMELLIA128_SHA256
  • RSA_CAMELLIA256_SHA256
  • DH_DSS_CAMELLIA256_SHA256
  • DH_RSA_CAMELLIA256_SHA256
  • DHE_DSS_CAMELLIA256_SHA256
  • DHE_RSA_CAMELLIA256_SHA256
  • DH_ANON_CAMELLIA256_SHA256
  • ECDHE_ECDSA_CAMELLIA128_SHA256
  • ECDHE_ECDSA_CAMELLIA256_SHA384
  • ECDH_ECDSA_CAMELLIA128_SHA256
  • ECDH_ECDSA_CAMELLIA256_SHA384
  • ECDHE_RSA_CAMELLIA128_SHA256
  • ECDHE_RSA_CAMELLIA256_SHA384
  • ECDH_RSA_CAMELLIA128_SHA256
  • ECDH_RSA_CAMELLIA256_SHA384
  • RSA_CAMELLIA128_GCM_SHA256
  • RSA_CAMELLIA256_GCM_SHA384
  • DHE_RSA_CAMELLIA128_GCM_SHA256
  • DHE_RSA_CAMELLIA256_GCM_SHA384
  • DH_RSA_CAMELLIA128_GCM_SHA256
  • DH_RSA_CAMELLIA256_GCM_SHA384
  • DHE_DSS_CAMELLIA128_GCM_SHA256
  • DHE_DSS_CAMELLIA256_GCM_SHA384
  • DH_DSS_CAMELLIA128_GCM_SHA256
  • DH_DSS_CAMELLIA256_GCM_SHA384
  • DH_anon_CAMELLIA128_GCM_SHA256
  • DH_anon_CAMELLIA256_GCM_SHA384
  • ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDH_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDH_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDHE_RSA_CAMELLIA128_GCM_SHA256
  • ECDHE_RSA_CAMELLIA256_GCM_SHA384
  • ECDH_RSA_CAMELLIA128_GCM_SHA256
  • ECDH_RSA_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_GCM_SHA256
  • PSK_CAMELLIA256_GCM_SHA384
  • DHE_PSK_CAMELLIA128_GCM_SHA256
  • DHE_PSK_CAMELLIA256_GCM_SHA384
  • RSA_PSK_CAMELLIA128_GCM_SHA256
  • RSA_PSK_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_SHA256
  • PSK_CAMELLIA256_SHA384
  • DHE_PSK_CAMELLIA128_SHA256
  • DHE_PSK_CAMELLIA256_SHA384
  • RSA_PSK_CAMELLIA128_SHA256
  • RSA_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_CAMELLIA128_SHA256
  • ECDHE_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_RC4_SHA
  • ECDHE_PSK_3DES_SHA
  • ECDHE_PSK_AES128_SHA
  • ECDHE_PSK_AES256_SHA
  • ECDHE_PSK_AES128_SHA256
  • ECDHE_PSK_AES256_SHA384
  • ECDHE_PSK_NULL_SHA
  • ECDHE_PSK_NULL_SHA256
  • ECDHE_PSK_NULL_SHA384
  • ECDHE_RSA_CHACHA20_POLY1305_SHA256
  • ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
  • DHE_RSA_CHACHA20_POLY1305_SHA256
  • PSK_CHACHA20_POLY1305_SHA256
  • ECDHE_PSK_CHACHA20_POLY1305_SHA256
  • DHE_PSK_CHACHA20_POLY1305_SHA256
  • RSA_PSK_CHACHA20_POLY1305_SHA256
  • AES128_GCM_SHA256
  • AES256_GCM_SHA384
  • CHACHA20_POLY1305_SHA256
  • AES128_CCM_SHA256
  • AES128_CCM8_SHA256

Data Type

String

TLSECCurves Property (SecureBlackbox_Authenticator Class)

Defines the elliptic curves to enable.

Object Oriented Interface


public function getTLSECCurves();


public function setTLSECCurves($value);

Procedural Interface


secureblackbox_authenticator_get($res, 211 );


secureblackbox_authenticator_set($res, 211, $value );

Default Value

''

Remarks

Defines the elliptic curves to enable.

Data Type

String

TLSExtensions Property (SecureBlackbox_Authenticator Class)

Provides access to TLS extensions.

Object Oriented Interface


public function getTLSExtensions();


public function setTLSExtensions($value);

Procedural Interface


secureblackbox_authenticator_get($res, 212 );


secureblackbox_authenticator_set($res, 212, $value );

Default Value

''

Remarks

Provides access to TLS extensions.

Data Type

String

TLSForceResumeIfDestinationChanges Property (SecureBlackbox_Authenticator Class)

Whether to force TLS session resumption when the destination address changes.

Object Oriented Interface


public function getTLSForceResumeIfDestinationChanges();


public function setTLSForceResumeIfDestinationChanges($value);

Procedural Interface


secureblackbox_authenticator_get($res, 213 );


secureblackbox_authenticator_set($res, 213, $value );

Default Value

false

Remarks

Whether to force TLS session resumption when the destination address changes.

Data Type

Boolean

TLSPreSharedIdentity Property (SecureBlackbox_Authenticator Class)

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Object Oriented Interface


public function getTLSPreSharedIdentity();


public function setTLSPreSharedIdentity($value);

Procedural Interface


secureblackbox_authenticator_get($res, 214 );


secureblackbox_authenticator_set($res, 214, $value );

Default Value

''

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is not available at design time.

Data Type

String

TLSPreSharedKey Property (SecureBlackbox_Authenticator Class)

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Object Oriented Interface


public function getTLSPreSharedKey();


public function setTLSPreSharedKey($value);

Procedural Interface


secureblackbox_authenticator_get($res, 215 );


secureblackbox_authenticator_set($res, 215, $value );

Default Value

''

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

This property is not available at design time.

Data Type

String

TLSPreSharedKeyCiphersuite Property (SecureBlackbox_Authenticator Class)

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Object Oriented Interface


public function getTLSPreSharedKeyCiphersuite();


public function setTLSPreSharedKeyCiphersuite($value);

Procedural Interface


secureblackbox_authenticator_get($res, 216 );


secureblackbox_authenticator_set($res, 216, $value );

Default Value

''

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Data Type

String

TLSRenegotiationAttackPreventionMode Property (SecureBlackbox_Authenticator Class)

Selects the renegotiation attack prevention mechanism.

Object Oriented Interface


public function getTLSRenegotiationAttackPreventionMode();


public function setTLSRenegotiationAttackPreventionMode($value);

Procedural Interface


secureblackbox_authenticator_get($res, 217 );


secureblackbox_authenticator_set($res, 217, $value );

Default Value

0

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:

crapmCompatible0TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict1Renegotiation attack prevention is enabled and enforced.
crapmAuto2Automatically choose whether to enable or disable renegotiation attack prevention.

Data Type

Integer

TLSRevocationCheck Property (SecureBlackbox_Authenticator Class)

Specifies the kind(s) of revocation check to perform.

Object Oriented Interface


public function getTLSRevocationCheck();


public function setTLSRevocationCheck($value);

Procedural Interface


secureblackbox_authenticator_get($res, 218 );


secureblackbox_authenticator_set($res, 218, $value );

Default Value

1

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

crcNone0No revocation checking.
crcAuto1Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL2All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP3All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP4All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL5All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP6All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP7All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL8All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

This property is not available at design time.

Data Type

Integer

TLSSSLOptions Property (SecureBlackbox_Authenticator Class)

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Object Oriented Interface


public function getTLSSSLOptions();


public function setTLSSSLOptions($value);

Procedural Interface


secureblackbox_authenticator_get($res, 219 );


secureblackbox_authenticator_set($res, 219, $value );

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

cssloExpectShutdownMessage0x001Wait for the close-notify message when shutting down the connection

cssloOpenSSLDTLSWorkaround0x002(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions

cssloDisableKexLengthAlignment0x004Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.

cssloForceUseOfClientCertHashAlg0x008Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it.

cssloAutoAddServerNameExtension0x010Automatically add the server name extension when known

cssloAcceptTrustedSRPPrimesOnly0x020Accept trusted SRP primes only

cssloDisableSignatureAlgorithmsExtension0x040Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it.

cssloIntolerateHigherProtocolVersions0x080(server option) Do not allow fallback from TLS versions higher than currently enabled

cssloStickToPrefCertHashAlg0x100Stick to preferred certificate hash algorithms

cssloNoImplicitTLS12Fallback0x200Disable implicit TLS 1.3 to 1.2 fallbacks

cssloUseHandshakeBatches0x400Send the handshake message as large batches rather than individually

Data Type

Integer

TLSTLSMode Property (SecureBlackbox_Authenticator Class)

Specifies the TLS mode to use.

Object Oriented Interface


public function getTLSTLSMode();


public function setTLSTLSMode($value);

Procedural Interface


secureblackbox_authenticator_get($res, 220 );


secureblackbox_authenticator_set($res, 220, $value );

Default Value

0

Remarks

Specifies the TLS mode to use.

smDefault0
smNoTLS1Do not use TLS
smExplicitTLS2Connect to the server without any encryption and then request an SSL session.
smImplicitTLS3Connect to the specified port, and establish the SSL session at once.
smMixedTLS4Connect to the specified port, and establish the SSL session at once, but allow plain data.

Data Type

Integer

TLSUseExtendedMasterSecret Property (SecureBlackbox_Authenticator Class)

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Object Oriented Interface


public function getTLSUseExtendedMasterSecret();


public function setTLSUseExtendedMasterSecret($value);

Procedural Interface


secureblackbox_authenticator_get($res, 221 );


secureblackbox_authenticator_set($res, 221, $value );

Default Value

false

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Data Type

Boolean

TLSUseSessionResumption Property (SecureBlackbox_Authenticator Class)

Enables or disables the TLS session resumption capability.

Object Oriented Interface


public function getTLSUseSessionResumption();


public function setTLSUseSessionResumption($value);

Procedural Interface


secureblackbox_authenticator_get($res, 222 );


secureblackbox_authenticator_set($res, 222, $value );

Default Value

false

Remarks

Enables or disables the TLS session resumption capability.

Data Type

Boolean

TLSVersions Property (SecureBlackbox_Authenticator Class)

The SSL/TLS versions to enable by default.

Object Oriented Interface


public function getTLSVersions();


public function setTLSVersions($value);

Procedural Interface


secureblackbox_authenticator_get($res, 223 );


secureblackbox_authenticator_set($res, 223, $value );

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

csbSSL20x01SSL 2

csbSSL30x02SSL 3

csbTLS10x04TLS 1.0

csbTLS110x08TLS 1.1

csbTLS120x10TLS 1.2

csbTLS130x20TLS 1.3

Data Type

Integer

TrustedCertCount Property (SecureBlackbox_Authenticator Class)

The number of records in the TrustedCert arrays.

Object Oriented Interface


public function getTrustedCertCount();


public function setTrustedCertCount($value);

Procedural Interface


secureblackbox_authenticator_get($res, 224 );


secureblackbox_authenticator_set($res, 224, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at TrustedCertCount - 1.

This property is not available at design time.

Data Type

Integer

TrustedCertBytes Property (SecureBlackbox_Authenticator Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getTrustedCertBytes($trustedcertindex);


Procedural Interface


secureblackbox_authenticator_get($res, 225 , $trustedcertindex);


Remarks

Returns the raw certificate data in DER format.

The $trustedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TrustedCertHandle Property (SecureBlackbox_Authenticator Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getTrustedCertHandle($trustedcertindex);


public function setTrustedCertHandle($trustedcertindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 232 , $trustedcertindex);


secureblackbox_authenticator_set($res, 232, $value , $trustedcertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $trustedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is not available at design time.

Data Type

Long64

UserCount Property (SecureBlackbox_Authenticator Class)

The number of records in the User arrays.

Object Oriented Interface


public function getUserCount();


public function setUserCount($value);

Procedural Interface


secureblackbox_authenticator_get($res, 259 );


secureblackbox_authenticator_set($res, 259, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at UserCount - 1.

This property is not available at design time.

Data Type

Integer

UserAssociatedData Property (SecureBlackbox_Authenticator Class)

Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.

Object Oriented Interface


public function getUserAssociatedData($userindex);


public function setUserAssociatedData($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 260 , $userindex);


secureblackbox_authenticator_set($res, 260, $value , $userindex);

Remarks

Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

Byte Array

UserBasePath Property (SecureBlackbox_Authenticator Class)

Base path for this user in the server's file system.

Object Oriented Interface


public function getUserBasePath($userindex);


public function setUserBasePath($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 261 , $userindex);


secureblackbox_authenticator_set($res, 261, $value , $userindex);

Default Value

''

Remarks

Base path for this user in the server's file system.

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

String

UserCert Property (SecureBlackbox_Authenticator Class)

Contains the user's certificate.

Object Oriented Interface


public function getUserCert($userindex);


public function setUserCert($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 262 , $userindex);


secureblackbox_authenticator_set($res, 262, $value , $userindex);

Remarks

Contains the user's certificate.

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

Byte Array

UserData Property (SecureBlackbox_Authenticator Class)

Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.

Object Oriented Interface


public function getUserData($userindex);


public function setUserData($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 263 , $userindex);


secureblackbox_authenticator_set($res, 263, $value , $userindex);

Default Value

''

Remarks

Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

String

UserHandle Property (SecureBlackbox_Authenticator Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getUserHandle($userindex);


public function setUserHandle($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 264 , $userindex);


secureblackbox_authenticator_set($res, 264, $value , $userindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

Long64

UserHashAlgorithm Property (SecureBlackbox_Authenticator Class)

Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user.

Object Oriented Interface


public function getUserHashAlgorithm($userindex);


public function setUserHashAlgorithm($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 265 , $userindex);


secureblackbox_authenticator_set($res, 265, $value , $userindex);

Default Value

''

Remarks

Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user. Three HMAC algorithms are supported, with SHA-1, SHA-256, and SHA-512 digests:

SB_MAC_ALGORITHM_HMAC_SHA1SHA1
SB_MAC_ALGORITHM_HMAC_SHA256SHA256
SB_MAC_ALGORITHM_HMAC_SHA512SHA512

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

String

UserIncomingSpeedLimit Property (SecureBlackbox_Authenticator Class)

Specifies the incoming speed limit for this user.

Object Oriented Interface


public function getUserIncomingSpeedLimit($userindex);


public function setUserIncomingSpeedLimit($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 266 , $userindex);


secureblackbox_authenticator_set($res, 266, $value , $userindex);

Default Value

0

Remarks

Specifies the incoming speed limit for this user. The value of 0 (zero) means "no limitation".

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

Integer

UserOtpAlgorithm Property (SecureBlackbox_Authenticator Class)

The algorithm used to generate one-time passwords (OTP) for this user, either HOTP (Hash-based OTP) or TOTP (Time-based OTP).

Object Oriented Interface


public function getUserOtpAlgorithm($userindex);


public function setUserOtpAlgorithm($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 267 , $userindex);


secureblackbox_authenticator_set($res, 267, $value , $userindex);

Default Value

0

Remarks

The algorithm used to generate one-time passwords (OTP) for this user, either HOTP (Hash-based OTP) or TOTP (Time-based OTP). In the former case, a value of a dedicated counter is used to generate a unique password, while in the latter the password is generated on the basis of the current time value.

oaHmac0
oaTime1

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

Integer

UserOtpValue Property (SecureBlackbox_Authenticator Class)

The user's time interval (TOTP) or Counter (HOTP).

Object Oriented Interface


public function getUserOtpValue($userindex);


public function setUserOtpValue($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 268 , $userindex);


secureblackbox_authenticator_set($res, 268, $value , $userindex);

Default Value

0

Remarks

The user's time interval (TOTP) or Counter (HOTP).

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

Integer

UserOutgoingSpeedLimit Property (SecureBlackbox_Authenticator Class)

Specifies the outgoing speed limit for this user.

Object Oriented Interface


public function getUserOutgoingSpeedLimit($userindex);


public function setUserOutgoingSpeedLimit($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 269 , $userindex);


secureblackbox_authenticator_set($res, 269, $value , $userindex);

Default Value

0

Remarks

Specifies the outgoing speed limit for this user. The value of 0 (zero) means "no limitation".

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

Integer

UserPassword Property (SecureBlackbox_Authenticator Class)

The user's authentication password.

Object Oriented Interface


public function getUserPassword($userindex);


public function setUserPassword($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 270 , $userindex);


secureblackbox_authenticator_set($res, 270, $value , $userindex);

Default Value

''

Remarks

The user's authentication password.

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

String

UserPasswordLen Property (SecureBlackbox_Authenticator Class)

Specifies the length of the user's OTP password.

Object Oriented Interface


public function getUserPasswordLen($userindex);


public function setUserPasswordLen($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 271 , $userindex);


secureblackbox_authenticator_set($res, 271, $value , $userindex);

Default Value

0

Remarks

Specifies the length of the user's OTP password.

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

Integer

UserSharedSecret Property (SecureBlackbox_Authenticator Class)

Contains the user's secret key, which is essentially a shared secret between the client and server.

Object Oriented Interface


public function getUserSharedSecret($userindex);


public function setUserSharedSecret($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 272 , $userindex);


secureblackbox_authenticator_set($res, 272, $value , $userindex);

Remarks

Contains the user's secret key, which is essentially a shared secret between the client and server.

Shared secrets can be used in TLS-driven protocols, as well as in OTP (where it is called a 'key secret') for generating one-time passwords on one side, and validate them on the other.

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

Byte Array

UserSSHKey Property (SecureBlackbox_Authenticator Class)

Contains the user's SSH key.

Object Oriented Interface


public function getUserSSHKey($userindex);


public function setUserSSHKey($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 273 , $userindex);


secureblackbox_authenticator_set($res, 273, $value , $userindex);

Remarks

Contains the user's SSH key.

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

Byte Array

UserUsername Property (SecureBlackbox_Authenticator Class)

The registered name (login) of the user.

Object Oriented Interface


public function getUserUsername($userindex);


public function setUserUsername($userindex, $value);

Procedural Interface


secureblackbox_authenticator_get($res, 274 , $userindex);


secureblackbox_authenticator_set($res, 274, $value , $userindex);

Default Value

''

Remarks

The registered name (login) of the user.

The $userindex parameter specifies the index of the item in the array. The size of the array is controlled by the UserCount property.

This property is not available at design time.

Data Type

String

ValidationLog Property (SecureBlackbox_Authenticator Class)

Contains the complete log of the certificate validation routine.

Object Oriented Interface


public function getValidationLog();


Procedural Interface


secureblackbox_authenticator_get($res, 275 );


Default Value

''

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only and not available at design time.

Data Type

String

ValidationMoment Property (SecureBlackbox_Authenticator Class)

The time point at which signature validity is to be established.

Object Oriented Interface


public function getValidationMoment();


public function setValidationMoment($value);

Procedural Interface


secureblackbox_authenticator_get($res, 276 );


secureblackbox_authenticator_set($res, 276, $value );

Default Value

''

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

Data Type

String

Config Method (SecureBlackbox_Authenticator Class)

Sets or retrieves a configuration setting.

Object Oriented Interface

public function doConfig($configurationstring);

Procedural Interface

secureblackbox_authenticator_do_config($res, $configurationstring);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

ContinueAuth Method (SecureBlackbox_Authenticator Class)

Call this method to process an authentication token and proceed to the next authentication step.

Object Oriented Interface

public function doContinueAuth($state, $authtoken);

Procedural Interface

secureblackbox_authenticator_do_continueauth($res, $state, $authtoken);

Remarks

Call this method upon receiving an authentication token from the user to validate it and proceed to the next authentication step (or complete the authentication).

Pass the authentication state blob that you obtained at the beginning of the authentication step to the State parameter, and the authentication credential received from the user to the AuthToken parameter. The method will validate the token and return one of the following results:

arAuthFurtherAuthNeeded0
arAuthSucceeded1
arAuthFailed2

The further authentication needed result indicates that the user is expected to go through at least one more authentication step. Check AuthInfo property to find out which authentication method should be used on that step, and request the relevant authentication token from the user. Upon receiving that new token, call ContinueAuth again - and continue running this loop until authentication succeeded or authentication failed result is returned.

DoAction Method (SecureBlackbox_Authenticator Class)

Performs an additional action.

Object Oriented Interface

public function doDoAction($actionid, $actionparams);

Procedural Interface

secureblackbox_authenticator_do_doaction($res, $actionid, $actionparams);

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

StartAuth Method (SecureBlackbox_Authenticator Class)

Initiates an authentication process.

Object Oriented Interface

public function doStartAuth($userid);

Procedural Interface

secureblackbox_authenticator_do_startauth($res, $userid);

Remarks

Call this method to start an authentication process for UserID.

The authentication process may consist of multiple atomic steps. Each step represents a single authentication transaction, such as provision of a password, a PIN, or a one-time token. The exact authentication step sequence for the user is chosen according to the following rules:

  • If the user is found in the Users database, all authentication methods specified for that user are activated;
  • otherwise, the methods assigned to DefaultAuthMethods are activated;
  • AuthStart event is thrown, allowing the application to tune up the selection of authentication methods if needed.
  • the first method from the list is initiated.

This method may return one of the three results:

arAuthFurtherAuthNeeded0
arAuthSucceeded1
arAuthFailed2

The authentication succeeded result is returned if the authentication method selection procedure completed with an empty method list. A typical result of this method though is further authentication required, which indicates that the next authentication method has kicked off. Use rpAuthInfo; property to find out which authentication method should be used on this step, and solicit the relevant authentication token from the user. Pass the received token to the ContinueAuth method for validation.

AuthAttemptResult Event (SecureBlackbox_Authenticator Class)

Reports the outcome of an authentication attempt.

Object Oriented Interface

public function fireAuthAttemptResult($param);

Procedural Interface

secureblackbox_authenticator_register_callback($res, 1, array($this, 'fireAuthAttemptResult'));

Parameter List

 'userid'
'authmethod'
'authres'
'remainingauthmethods'

Remarks

This event follows a call to ContinueAuth method and reports the user's updated authentication status following the token verification.

The updated status is reported via the AuthRes parameter, and can take one of the following values:

arAuthFurtherAuthNeeded0
arAuthSucceeded1
arAuthFailed2

The RemainingAuthMethods parameter lists the authentication methods that the user is yet to go through. The application can change either of AuthRes and RemainingAuthMethods in the event handler to alter the authentication flow.

AuthAttemptStart Event (SecureBlackbox_Authenticator Class)

Signifies the start of an authentication attempt.

Object Oriented Interface

public function fireAuthAttemptStart($param);

Procedural Interface

secureblackbox_authenticator_register_callback($res, 2, array($this, 'fireAuthAttemptStart'));

Parameter List

 'userid'
'authmethod'
'remainingauthmethods'

Remarks

This event reports the start of an atomic authentication step. The AuthMethod parameter contains the authentication method that has started. The following authentication methods are currently supported, but the application may define its own methods in AuthStart, and tune them up in CustomAuthStart:

  • password
  • otp-h
  • otp-t
  • dcauth
RemainingAuthMethods contains a list of authentication methods that will follow.

This event is thrown from StartAuth and ContinueAuth methods.

AuthStart Event (SecureBlackbox_Authenticator Class)

Signifies the start of an authentication process.

Object Oriented Interface

public function fireAuthStart($param);

Procedural Interface

secureblackbox_authenticator_register_callback($res, 3, array($this, 'fireAuthStart'));

Parameter List

 'userid'
'authmethods'

Remarks

This event is fired in response to a StartAuth call, and signifies the start of a (potentially, multi-step) authentication process for UserID. The AuthMethods parameter list the methods to be performed for the user. The application may customize them as needed.

The following default authentication methods are supported:

  • password
  • otp-h
  • otp-t
  • dcauth

The application can define its own authentication methods if needed.

This event is only fired once per user authentication process, at the very start of it. See AuthAttemptStart for per-step notification.

AuthVerify Event (SecureBlackbox_Authenticator Class)

Requests the application to validate an authentication token.

Object Oriented Interface

public function fireAuthVerify($param);

Procedural Interface

secureblackbox_authenticator_register_callback($res, 4, array($this, 'fireAuthVerify'));

Parameter List

 'userid'
'authmethod'
'authtoken'
'authmethoddata'
'valid'

Remarks

Class fires this event to ask the application to validate an authentication token that it can't validate automatically. This can happen if UserID was not found in the user database or a custom authentication method is used.

AuthMethod and AuthToken specify the authentication method being used and the authentication token provided by the user. AuthMethodData contains an application-specific data provided by the application at the beginning of the authentication step.

An event handler subscribed to this event should validate the authentication token provided by the user and set the Valid parameter accordingly.

CustomAuthStart Event (SecureBlackbox_Authenticator Class)

Reports the beginning of a custom authentication method.

Object Oriented Interface

public function fireCustomAuthStart($param);

Procedural Interface

secureblackbox_authenticator_register_callback($res, 5, array($this, 'fireCustomAuthStart'));

Parameter List

 'userid'
'authmethod'
'authmethodpars'
'authmethoddata'

Remarks

This event marks the start of an authentication method not supported by class internally and requests authentication parameters from the application.

Class currently supports the following authentication methods:

  • password
  • otp-h
  • otp-t
  • dcauth

The application may also use any number of custom authentication method it wants. Each such method is identified by a unique string name (such as 'pin', 'fingerprint', or 'fingerprint-v2'). It may specify them in DefaultAuthMethods property, or provide on the fly via AuthStart event.

The event handler may return authentication parameters and application-specific data to be associated with the authentication attempt via AuthMethodPars and AuthMethodData parameters.

Error Event (SecureBlackbox_Authenticator Class)

Reports information about errors during authentication.

Object Oriented Interface

public function fireError($param);

Procedural Interface

secureblackbox_authenticator_register_callback($res, 6, array($this, 'fireError'));

Parameter List

 'errorcode'
'description'

Remarks

The event is fired in case of exceptional conditions during user authentication.

ErrorCode contains an error code and Description contains a textual description of the error.

Notification Event (SecureBlackbox_Authenticator Class)

This event notifies the application about an underlying control flow event.

Object Oriented Interface

public function fireNotification($param);

Procedural Interface

secureblackbox_authenticator_register_callback($res, 7, array($this, 'fireNotification'));

Parameter List

 'eventid'
'eventparam'

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

Config Settings (Authenticator Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

DCAuthenticator Config Settings

ForceCompleteChainValidationForTrusted:   Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.

Set this property to True to enable full chain validation for explicitly trusted intermediary or end-entity certificates. This may be useful when creating signatures to enforce completeness of the collected revocation information. It often makes sense to set this property to false when validating signatures to reduce validation time and avoid issues with badly configured environments.

IgnoreOCSPNoCheckExtension:   Whether the OCSP NoCheck extension should be ignored.

Set this property to True to make the validation engine ignore the OCSP no-check extension. You would normally need to set this property when validating severely non-compliant chains that misuse the extension, causing chain loops or other validation issues.

IgnoreSystemTrust:   Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the class should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the class should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as the TrustedCertificates property) are considered trusted.

ImplicitlyTrustSelfSignedCertificates:   Whether to trust self-signed certificates.

Set this property to True to implicitly trust all self-signed certificates. Use it with care as trusting just about every self-signed certificate is unwise. One exceptional reason where this property may be handy is where a chain is validated in an environment that is not supposed to trust it (for example, a signing, rather than verifying environment, or a QA server). Trusting all self-signing certificates (which are normally trusted) allows emulating the verifying environment without actually changing its security settings.

PromoteLongOCSPResponses:   Whether long OCSP responses are requested.

Set this property to True to force the class to publish the 'long' form of OCSP responses. Otherwise, only BasicOCSPResponse blobs are promoted.

TolerateMinorChainIssues:   Whether to tolerate minor chain issues.

This parameter controls whether the chain validator should tolerate minor technical issues when validating the chain. Those are:

  • CA, revocation source, TLS key usage requirements are not mandated
  • Violation of OCSP issuer requirements are ignored
  • The AuthorityKeyID extension in CRL- and certificate-issuing CAs are ignored (helps with incorrectly renewed certificates)
  • Basic constraints and name constraints of CA certificates are ignored
  • Some weaker algorithms are tolerated
UseMicrosoftCTL:   Enables or disables the automatic use of the Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UseSystemCertificates:   Enables or disables the use of the system certificates.

Use this property to tell the chain validation module to automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

Base Config Settings

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:

offNo caching (default)
localLocal caching
globalGlobal caching

Cookies:   Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS:   Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:

noneNo static DNS rules (default)
localLocal static DNS rules
globalGlobal static DNS rules

StaticIPAddress[domain]:   Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses:   Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag:   Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup:   Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime:   Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval:   Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver:   Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (Authenticator Class)